February 2020 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v3 2/6] ASoC: qdsp6: q6afe: add support to pcm ports
by Adam Serbinski 12 Feb '20

12 Feb '20

This patch adds support to pcm ports in AFE. Signed-off-by: Adam Serbinski <adam(a)serbinski.com> CC: Andy Gross <agross(a)kernel.org> CC: Mark Rutland <mark.rutland(a)arm.com> CC: Liam Girdwood <lgirdwood(a)gmail.com> CC: Patrick Lai <plai(a)codeaurora.org> CC: Banajit Goswami <bgoswami(a)codeaurora.org> CC: Jaroslav Kysela <perex(a)perex.cz> CC: Takashi Iwai <tiwai(a)suse.com> CC: alsa-devel(a)alsa-project.org CC: linux-arm-msm(a)vger.kernel.org CC: devicetree(a)vger.kernel.org CC: linux-kernel(a)vger.kernel.org --- sound/soc/qcom/qdsp6/q6afe.c | 118 +++++++++++++++++++++++++++++++++++ sound/soc/qcom/qdsp6/q6afe.h | 13 +++- 2 files changed, 130 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index e0945f7a58c8..11de01679cad 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -40,6 +40,7 @@ #define AFE_PARAM_ID_SLIMBUS_CONFIG 0x00010212 #define AFE_PARAM_ID_I2S_CONFIG 0x0001020D +#define AFE_PARAM_ID_PCM_CONFIG 0x0001020E #define AFE_PARAM_ID_TDM_CONFIG 0x0001029D #define AFE_PARAM_ID_PORT_SLOT_MAPPING_CONFIG 0x00010297 @@ -117,6 +118,15 @@ #define AFE_PORT_ID_QUATERNARY_MI2S_RX 0x1006 #define AFE_PORT_ID_QUATERNARY_MI2S_TX 0x1007 +#define AFE_PORT_ID_PRIMARY_PCM_RX 0x100A +#define AFE_PORT_ID_PRIMARY_PCM_TX 0x100B +#define AFE_PORT_ID_SECONDARY_PCM_RX 0x100C +#define AFE_PORT_ID_SECONDARY_PCM_TX 0x100D +#define AFE_PORT_ID_TERTIARY_PCM_RX 0x1012 +#define AFE_PORT_ID_TERTIARY_PCM_TX 0x1013 +#define AFE_PORT_ID_QUATERNARY_PCM_RX 0x1014 +#define AFE_PORT_ID_QUATERNARY_PCM_TX 0x1015 + /* Start of the range of port IDs for TDM devices. */ #define AFE_PORT_ID_TDM_PORT_RANGE_START 0x9000 @@ -421,6 +431,29 @@ struct afe_digital_clk_cfg { u16 reserved; } __packed; +#define AFE_API_VERSION_PCM_CONFIG 0x1 +#define AFE_PORT_PCM_QUANT_MAX 0x5 +#define AFE_PORT_PCM_SYNC_SRC_EXTERNAL 0x0 +#define AFE_PORT_PCM_SYNC_SRC_INTERNAL 0x1 +#define AFE_PORT_PCM_AUX_MODE_PCM 0x0 +#define AFE_PORT_PCM_BITS_PER_FRAME_64 0x3 +#define AFE_PORT_PCM_BITS_PER_FRAME_128 0x4 +#define AFE_PORT_PCM_CTRL_DATA_OE_DISABLE 0x0 + +struct afe_param_id_pcm_cfg { + u32 pcm_cfg_minor_version; + u16 aux_mode; + u16 sync_src; + u16 frame_setting; + u16 quantype; + u16 ctrl_data_out_enable; + u16 reserved; + u32 sample_rate; + u16 bit_width; + u16 num_channels; + u16 slot_number_mapping[AFE_MAX_PCM_SLOT_COUNT]; +} __packed; + struct afe_param_id_i2s_cfg { u32 i2s_cfg_minor_version; u16 bit_width; @@ -452,6 +485,7 @@ union afe_port_config { struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch; struct afe_param_id_slimbus_cfg slim_cfg; struct afe_param_id_i2s_cfg i2s_cfg; + struct afe_param_id_pcm_cfg pcm_cfg; struct afe_param_id_tdm_cfg tdm_cfg; } __packed; @@ -707,6 +741,22 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = { QUINARY_TDM_TX_7, 0, 1}, [DISPLAY_PORT_RX] = { AFE_PORT_ID_HDMI_OVER_DP_RX, DISPLAY_PORT_RX, 1, 1}, + [PRIMARY_PCM_RX] = { AFE_PORT_ID_PRIMARY_PCM_RX, + PRIMARY_PCM_RX, 1, 1}, + [PRIMARY_PCM_TX] = { AFE_PORT_ID_PRIMARY_PCM_TX, + PRIMARY_PCM_RX, 0, 1}, + [SECONDARY_PCM_RX] = { AFE_PORT_ID_SECONDARY_PCM_RX, + SECONDARY_PCM_RX, 1, 1}, + [SECONDARY_PCM_TX] = { AFE_PORT_ID_SECONDARY_PCM_TX, + SECONDARY_PCM_TX, 0, 1}, + [TERTIARY_PCM_RX] = { AFE_PORT_ID_TERTIARY_PCM_RX, + TERTIARY_PCM_RX, 1, 1}, + [TERTIARY_PCM_TX] = { AFE_PORT_ID_TERTIARY_PCM_TX, + TERTIARY_PCM_TX, 0, 1}, + [QUATERNARY_PCM_RX] = { AFE_PORT_ID_QUATERNARY_PCM_RX, + QUATERNARY_PCM_RX, 1, 1}, + [QUATERNARY_PCM_TX] = { AFE_PORT_ID_QUATERNARY_PCM_TX, + QUATERNARY_PCM_TX, 0, 1}, }; static void q6afe_port_free(struct kref *ref) @@ -993,6 +1043,7 @@ int q6afe_port_set_sysclk(struct q6afe_port *port, int clk_id, break; case Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT ... Q6AFE_LPASS_CLK_ID_QUI_MI2S_OSR: case Q6AFE_LPASS_CLK_ID_MCLK_1 ... Q6AFE_LPASS_CLK_ID_INT_MCLK_1: + /* TDM cases overlap with PCM */ case Q6AFE_LPASS_CLK_ID_PRI_TDM_IBIT ... Q6AFE_LPASS_CLK_ID_QUIN_TDM_EBIT: cset.clk_set_minor_version = AFE_API_VERSION_CLOCK_SET; cset.clk_id = clk_id; @@ -1145,6 +1196,63 @@ void q6afe_hdmi_port_prepare(struct q6afe_port *port, } EXPORT_SYMBOL_GPL(q6afe_hdmi_port_prepare); +/** + * q6afe_pcm_port_prepare() - Prepare pcm afe port. + * + * @port: Instance of afe port + * @cfg: PCM configuration for the afe port + * + */ +int q6afe_pcm_port_prepare(struct q6afe_port *port, struct q6afe_pcm_cfg *cfg) +{ + union afe_port_config *pcfg = &port->port_cfg; + struct device *dev = port->afe->dev; + + pcfg->pcm_cfg.pcm_cfg_minor_version = AFE_API_VERSION_PCM_CONFIG; + + if (cfg->quantype > AFE_PORT_PCM_QUANT_MAX) { + dev_err(dev, "Invalid pcm quantization\n"); + return -EINVAL; + } + pcfg->pcm_cfg.quantype = cfg->quantype; + + memcpy(pcfg->pcm_cfg.slot_number_mapping, cfg->slot_number_mapping, + sizeof(u16) * AFE_PORT_MAX_PCM_AUDIO_CHAN_CNT); + + pcfg->pcm_cfg.aux_mode = AFE_PORT_PCM_AUX_MODE_PCM; + switch (cfg->fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + pcfg->pcm_cfg.sync_src = AFE_PORT_PCM_SYNC_SRC_INTERNAL; + break; + case SND_SOC_DAIFMT_CBM_CFM: + pcfg->pcm_cfg.sync_src = AFE_PORT_PCM_SYNC_SRC_EXTERNAL; + break; + default: + dev_err(dev, "Unsupported format\n"); + return -EINVAL; + } + + switch (cfg->sample_rate) { + case 8000: + pcfg->pcm_cfg.frame_setting = AFE_PORT_PCM_BITS_PER_FRAME_128; + break; + case 16000: + pcfg->pcm_cfg.frame_setting = AFE_PORT_PCM_BITS_PER_FRAME_64; + break; + default: + dev_err(dev, "Unsupported sample rate\n"); + return -EINVAL; + } + pcfg->pcm_cfg.ctrl_data_out_enable = AFE_PORT_PCM_CTRL_DATA_OE_DISABLE; + pcfg->pcm_cfg.reserved = 0; + pcfg->pcm_cfg.sample_rate = cfg->sample_rate; + pcfg->pcm_cfg.bit_width = 16; + pcfg->pcm_cfg.num_channels = 1; + + return 0; +} +EXPORT_SYMBOL_GPL(q6afe_pcm_port_prepare); + /** * q6afe_i2s_port_prepare() - Prepare i2s afe port. * @@ -1417,6 +1525,16 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id) case AFE_PORT_ID_QUATERNARY_MI2S_TX: cfg_type = AFE_PARAM_ID_I2S_CONFIG; break; + case AFE_PORT_ID_PRIMARY_PCM_RX: + case AFE_PORT_ID_PRIMARY_PCM_TX: + case AFE_PORT_ID_SECONDARY_PCM_RX: + case AFE_PORT_ID_SECONDARY_PCM_TX: + case AFE_PORT_ID_TERTIARY_PCM_RX: + case AFE_PORT_ID_TERTIARY_PCM_TX: + case AFE_PORT_ID_QUATERNARY_PCM_RX: + case AFE_PORT_ID_QUATERNARY_PCM_TX: + cfg_type = AFE_PARAM_ID_PCM_CONFIG; + break; case AFE_PORT_ID_PRIMARY_TDM_RX ... AFE_PORT_ID_QUINARY_TDM_TX_7: cfg_type = AFE_PARAM_ID_TDM_CONFIG; break; diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h index c7ed5422baff..d3b79e391e44 100644 --- a/sound/soc/qcom/qdsp6/q6afe.h +++ b/sound/soc/qcom/qdsp6/q6afe.h @@ -5,7 +5,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> -#define AFE_PORT_MAX 105 +#define AFE_PORT_MAX 113 #define MSM_AFE_PORT_TYPE_RX 0 #define MSM_AFE_PORT_TYPE_TX 1 @@ -14,7 +14,9 @@ #define Q6AFE_MAX_MI2S_LINES 4 #define AFE_MAX_CHAN_COUNT 8 +#define AFE_MAX_PCM_SLOT_COUNT 4 #define AFE_PORT_MAX_AUDIO_CHAN_CNT 0x8 +#define AFE_PORT_MAX_PCM_AUDIO_CHAN_CNT 0x4 #define Q6AFE_LPASS_CLK_SRC_INTERNAL 1 #define Q6AFE_LPASS_CLK_ROOT_DEFAULT 0 @@ -170,6 +172,13 @@ struct q6afe_i2s_cfg { int fmt; }; +struct q6afe_pcm_cfg { + u16 quantype; + u32 sample_rate; + u16 slot_number_mapping[AFE_MAX_PCM_SLOT_COUNT]; + int fmt; +}; + struct q6afe_tdm_cfg { u16 num_channels; u32 sample_rate; @@ -188,6 +197,7 @@ struct q6afe_port_config { struct q6afe_hdmi_cfg hdmi; struct q6afe_slim_cfg slim; struct q6afe_i2s_cfg i2s_cfg; + struct q6afe_pcm_cfg pcm_cfg; struct q6afe_tdm_cfg tdm; }; @@ -203,6 +213,7 @@ void q6afe_hdmi_port_prepare(struct q6afe_port *port, void q6afe_slim_port_prepare(struct q6afe_port *port, struct q6afe_slim_cfg *cfg); int q6afe_i2s_port_prepare(struct q6afe_port *port, struct q6afe_i2s_cfg *cfg); +int q6afe_pcm_port_prepare(struct q6afe_port *port, struct q6afe_pcm_cfg *cfg); void q6afe_tdm_port_prepare(struct q6afe_port *port, struct q6afe_tdm_cfg *cfg); int q6afe_port_set_sysclk(struct q6afe_port *port, int clk_id, -- 2.21.1

1 0

[alsa-devel] [PATCH v3 1/6] ASoC: qdsp6: dt-bindings: Add q6afe pcm dt binding
by Adam Serbinski 12 Feb '20

12 Feb '20

This patch adds bindings required for PCM ports on AFE. Signed-off-by: Adam Serbinski <adam(a)serbinski.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> CC: Andy Gross <agross(a)kernel.org> CC: Mark Rutland <mark.rutland(a)arm.com> CC: Liam Girdwood <lgirdwood(a)gmail.com> CC: Patrick Lai <plai(a)codeaurora.org> CC: Banajit Goswami <bgoswami(a)codeaurora.org> CC: Jaroslav Kysela <perex(a)perex.cz> CC: Takashi Iwai <tiwai(a)suse.com> CC: alsa-devel(a)alsa-project.org CC: linux-arm-msm(a)vger.kernel.org CC: devicetree(a)vger.kernel.org CC: linux-kernel(a)vger.kernel.org --- include/dt-bindings/sound/qcom,q6afe.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/dt-bindings/sound/qcom,q6afe.h b/include/dt-bindings/sound/qcom,q6afe.h index 1df06f8ad5c3..f3a435a112cb 100644 --- a/include/dt-bindings/sound/qcom,q6afe.h +++ b/include/dt-bindings/sound/qcom,q6afe.h @@ -107,6 +107,14 @@ #define QUINARY_TDM_RX_7 102 #define QUINARY_TDM_TX_7 103 #define DISPLAY_PORT_RX 104 +#define PRIMARY_PCM_RX 105 +#define PRIMARY_PCM_TX 106 +#define SECONDARY_PCM_RX 107 +#define SECONDARY_PCM_TX 108 +#define TERTIARY_PCM_RX 109 +#define TERTIARY_PCM_TX 110 +#define QUATERNARY_PCM_RX 111 +#define QUATERNARY_PCM_TX 112 #endif /* __DT_BINDINGS_Q6_AFE_H__ */ -- 2.21.1

1 0

[alsa-devel] [PATCH] ALSA: usb-audio: Apply sample rate quirk for Audioengine D1
by Arvind Sankar 11 Feb '20

11 Feb '20

The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate, but it returns the rate in byte-reversed order. When setting sampling rate, the driver produces these warning messages: [168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100 [168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000 [168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000 As can be seen from the hexadecimal conversion, the current rate read back is byte-reversed from the rate that was set. 44100 == 0x00ac44, 4500480 == 0x44ac00 48000 == 0x00bb80, 8436480 == 0x80bb00 96000 == 0x017700, 30465 == 0x007701 Rather than implementing a new quirk to reverse the order, just skip checking the rate to avoid spamming the log. Signed-off-by: Arvind Sankar <nivedita(a)alum.mit.edu> --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 3a5242e383b2..7f558f4b4520 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1440,6 +1440,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */ case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */ case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */ + case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */ return true; } -- 2.24.1

2 1

[alsa-devel] [PATCH v2 0/9] add ASoC components for AHUB
by Sameer Pujar 11 Feb '20

11 Feb '20

Overview ======== The Audio Hub (AHUB) is part of the Audio Processing Engine (APE) which comprises a collection of hardware accelerators for audio pre-processing and post-processing. It also includes a programmable full crossbar for routing audio data across these accelerators. This series exposes some of these below mentioned HW devices as ASoC components for Tegra platforms from Tegra210 onwards. * ADMAIF : The interface between ADMA and AHUB * XBAR : Crossbar for routing audio samples across various modules * I2S : Inter-IC Sound Controller * DMIC : Digital Microphone * DSPK : Digital Speaker Following is the summary of current series. 1. Add YAML DT binding documentation for above mentioned modules. 2. Helper function for ACIF programming is exposed for Tegra210 and later. 3. Add ASoC driver components for each of the above modules. 4. Add DT entries for above components for Tegra210, Tegra186 and Tegra194. 5. Enable these components for Jetson-Tx1, Jetson-Tx2 and Jetson-Xavier. Machine driver series will be sent separately. Changelog ========= v1 -> v2 -------- * [1/9] "dt-bindings: sound: tegra: add DT binding for AHUB" - no changes * [2/9] "ASoC: tegra: add support for CIF programming" - removed CIF programming changes for legacy chips. - this patch now exposes helper function for CIF programming, which can be used on Tegra210 later. - later tegra_cif.c can be extended for legacy chips as well. - updated commit message accordingly * [3/9] "ASoC: tegra: add Tegra210 based DMIC driver" - removed unnecessary initialization of 'ret' in probe() * [4/9] "ASoC: tegra: add Tegra210 based I2S driver" - removed unnecessary initialization of 'ret' in probe() - fixed indentation - added consistent bracing for if-else clauses - updated 'rx_fifo_th' type to 'unsigned int' - used BIT() macro for defines like '1 << {x}' in tegra210_i2s.h * [5/9] "ASoC: tegra: add Tegra210 based AHUB driver" - used of_device_get_match_data() to get 'soc_data' and removed explicit of_match_device() - used devm_platform_ioremap_resource() and removed explicit platform_get_resource() - fixed indentation for devm_snd_soc_register_component() - updated commit message - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [6/9] "ASoC: tegra: add Tegra186 based DSPK driver" - removed unnecessary initialization of 'ret' in probe() - updated 'max_th' to 'unsigned int' - shortened lengthy macro names to avoid wrapping in tegra186_dspk_wr_reg() and to be consistent * [7/9] "ASoC: tegra: add Tegra210 based ADMAIF driver" - used of_device_get_match_data() and removed explicit of_match_device() - used BIT() macro for defines like '1 << {x}' in tegra210_admaif.h - updated commit message to reflect compatible binding for Tegra186 and Tegra194. * [8/9] "arm64: tegra: add AHUB components for few Tegra chips" - no change * [9/9] "arm64: tegra: enable AHUB modules for few Tegra chips" - no change * common changes for patch [3/9] to [7/9] - sorted headers in alphabetical order - moved MODULE_DEVICE_TABLE() right below *_of_match table - removed macro DRV_NAME - removed explicit 'owner' field from platform_driver structure - added 'const' to snd_soc_dai_ops structure ================= Sameer Pujar (9): dt-bindings: sound: tegra: add DT binding for AHUB ASoC: tegra: add support for CIF programming ASoC: tegra: add Tegra210 based DMIC driver ASoC: tegra: add Tegra210 based I2S driver ASoC: tegra: add Tegra210 based AHUB driver ASoC: tegra: add Tegra186 based DSPK driver ASoC: tegra: add Tegra210 based ADMAIF driver arm64: tegra: add AHUB components for few Tegra chips arm64: tegra: enable AHUB modules for few Tegra chips .../bindings/sound/nvidia,tegra186-dspk.yaml | 105 +++ .../bindings/sound/nvidia,tegra210-admaif.yaml | 165 ++++ .../bindings/sound/nvidia,tegra210-ahub.yaml | 130 +++ .../bindings/sound/nvidia,tegra210-dmic.yaml | 105 +++ .../bindings/sound/nvidia,tegra210-i2s.yaml | 112 +++ arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 48 ++ arch/arm64/boot/dts/nvidia/tegra186.dtsi | 231 ++++- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 36 + arch/arm64/boot/dts/nvidia/tegra194.dtsi | 239 +++++- arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 40 + arch/arm64/boot/dts/nvidia/tegra210.dtsi | 145 ++++ sound/soc/tegra/Kconfig | 56 ++ sound/soc/tegra/Makefile | 12 + sound/soc/tegra/tegra186_dspk.c | 512 +++++++++++ sound/soc/tegra/tegra186_dspk.h | 73 ++ sound/soc/tegra/tegra210_admaif.c | 886 +++++++++++++++++++ sound/soc/tegra/tegra210_admaif.h | 164 ++++ sound/soc/tegra/tegra210_ahub.c | 653 ++++++++++++++ sound/soc/tegra/tegra210_ahub.h | 125 +++ sound/soc/tegra/tegra210_dmic.c | 517 ++++++++++++ sound/soc/tegra/tegra210_dmic.h | 85 ++ sound/soc/tegra/tegra210_i2s.c | 939 +++++++++++++++++++++ sound/soc/tegra/tegra210_i2s.h | 132 +++ sound/soc/tegra/tegra_cif.c | 34 + sound/soc/tegra/tegra_cif.h | 47 ++ sound/soc/tegra/tegra_pcm.c | 222 ++++- sound/soc/tegra/tegra_pcm.h | 23 +- 27 files changed, 5832 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml create mode 100644 sound/soc/tegra/tegra186_dspk.c create mode 100644 sound/soc/tegra/tegra186_dspk.h create mode 100644 sound/soc/tegra/tegra210_admaif.c create mode 100644 sound/soc/tegra/tegra210_admaif.h create mode 100644 sound/soc/tegra/tegra210_ahub.c create mode 100644 sound/soc/tegra/tegra210_ahub.h create mode 100644 sound/soc/tegra/tegra210_dmic.c create mode 100644 sound/soc/tegra/tegra210_dmic.h create mode 100644 sound/soc/tegra/tegra210_i2s.c create mode 100644 sound/soc/tegra/tegra210_i2s.h create mode 100644 sound/soc/tegra/tegra_cif.c create mode 100644 sound/soc/tegra/tegra_cif.h -- 2.7.4

5 45

[alsa-devel] [PATCH] ASoC: dt-bindings: stm32: convert sai to json-schema
by Olivier Moysan 11 Feb '20

11 Feb '20

Convert the STM32 SAI bindings to DT schema format using json-schema. Signed-off-by: Olivier Moysan <olivier.moysan(a)st.com> --- .../bindings/sound/st,stm32-sai.txt | 107 ---------- .../bindings/sound/st,stm32-sai.yaml | 193 ++++++++++++++++++ 2 files changed, 193 insertions(+), 107 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt deleted file mode 100644 index 944743dd9212..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ /dev/null @@ -1,107 +0,0 @@ -STMicroelectronics STM32 Serial Audio Interface (SAI). - -The SAI interface (Serial Audio Interface) offers a wide set of audio protocols -as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. -The SAI contains two independent audio sub-blocks. Each sub-block has -its own clock generator and I/O lines controller. - -Required properties: - - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai" - - reg: Base address and size of SAI common register set. - - clocks: Must contain phandle and clock specifier pairs for each entry - in clock-names. - - clock-names: Must contain "pclk" "x8k" and "x11k" - "pclk": Clock which feeds the peripheral bus interface. - Mandatory for "st,stm32h7-sai" compatible. - Not used for "st,stm32f4-sai" compatible. - "x8k": SAI parent clock for sampling rates multiple of 8kHz. - "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - - interrupts: cpu DAI interrupt line shared by SAI sub-blocks - -Optional properties: - - resets: Reference to a reset controller asserting the SAI - -SAI subnodes: -Two subnodes corresponding to SAI sub-block instances A et B can be defined. -Subnode can be omitted for unsused sub-block. - -SAI subnodes required properties: - - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b" - for SAI sub-block A or B respectively. - - reg: Base address and size of SAI sub-block register set. - - clocks: Must contain one phandle and clock specifier pair - for sai_ck which feeds the internal clock generator. - If the SAI shares a master clock, with another SAI set as MCLK - clock provider, SAI provider phandle must be specified here. - - clock-names: Must contain "sai_ck". - Must also contain "MCLK", if SAI shares a master clock, - with a SAI set as MCLK clock provider. - - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt - - dma-names: identifier string for each DMA request line - "tx": if sai sub-block is configured as playback DAI - "rx": if sai sub-block is configured as capture DAI - - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml - -SAI subnodes Optional properties: - - st,sync: specify synchronization mode. - By default SAI sub-block is in asynchronous mode. - This property sets SAI sub-block as slave of another SAI sub-block. - Must contain the phandle and index of the sai sub-block providing - the synchronization. - - st,iec60958: support S/PDIF IEC6958 protocol for playback - IEC60958 protocol is not available for capture. - By default, custom protocol is assumed, meaning that protocol is - configured according to protocol defined in related DAI link node, - such as i2s, left justified, right justified, dsp and pdm protocols. - Note: ac97 protocol is not supported by SAI driver - - #clock-cells: should be 0. This property must be present if the SAI device - is a master clock provider, according to clocks bindings, described in - Documentation/devicetree/bindings/clock/clock-bindings.txt. - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -sound_card { - compatible = "audio-graph-card"; - dais = <&sai1b_port>; -}; - -sai1: sai1@40015800 { - compatible = "st,stm32h7-sai"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x40015800 0x400>; - reg = <0x40015800 0x4>; - clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "pclk", "x8k", "x11k"; - interrupts = <87>; - - sai1a: audio-controller@40015804 { - compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1C>; - clocks = <&rcc SAI1_CK>; - clock-names = "sai_ck"; - dmas = <&dmamux1 1 87 0x400 0x0>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1a>; - - sai1b_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - format = "i2s"; - }; - }; - }; -}; - -audio-codec { - codec_port: port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml new file mode 100644 index 000000000000..33dca007fc86 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 Serial Audio Interface (SAI) + +maintainers: + - Olivier Moysan <olivier.moysan(a)st.com> + +description: + The SAI interface (Serial Audio Interface) offers a wide set of audio + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97. + The SAI contains two independent audio sub-blocks. Each sub-block has + its own clock generator and I/O lines controller. + +properties: + compatible: + enum: + - st,stm32f4-sai + - st,stm32h7-sai + + reg: + items: + - description: Base address and size of SAI common register set. + - description: Base address and size of SAI identification register set. + minItems: 1 + maxItems: 2 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + clocks: + items: + - description: pclk feeds the peripheral bus interface. + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz. + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz. + + clock-names: + items: + enum: [ pclk, x8k, x11k ] + minItems: 3 + maxItems: 3 + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + +patternProperties: + "^audio-controller@[0-9a-f]+$": + type: object + description: + Two subnodes corresponding to SAI sub-block instances A et B + can be defined. Subnode can be omitted for unsused sub-block. + + properties: + compatible: + description: Compatible for SAI sub-block A or B. + enum: + - st,stm32-sai-sub-a + - st,stm32-sai-sub-b + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + items: + - description: sai_ck clock feeding the internal clock generator. + - description: MCLK clock from a SAI set as master clock provider. + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: sai_ck + - const: MCLK + minItems: 1 + maxItems: 2 + + dmas: + items: + - description: SAI sub-block is configured as a capture DAI. + - description: SAI sub-block is configured as a playback DAI. + minItems: 1 + maxItems: 1 + + dma-names: + items: + - enum: [ rx, tx ] + + st,sync: + description: + Configure the SAI sub-block as slave of another SAI sub-block. + By default SAI sub-block is in asynchronous mode. + Must contain the phandle and index of the SAI sub-block providing + the synchronization. + allOf: + - $ref: /schemas/types.yaml#definitions/phandle-array + - maxItems: 1 + + st,iec60958: + description: + If set, support S/PDIF IEC6958 protocol for playback. + IEC60958 protocol is not available for capture. + By default, custom protocol is assumed, meaning that protocol is + configured according to protocol defined in related DAI link node, + such as i2s, left justified, right justified, dsp and pdm protocols. + allOf: + - $ref: /schemas/types.yaml#definitions/flag + + "#clock-cells": + description: Configure the SAI device as master clock provider. + const: 0 + + required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + contains: + const: st,stm32f4-sai + + - then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + enum: [ x8k, x11k ] + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "x8k", "x11k"; + resets = <&rcc SAI1_R>; + + sai1a: audio-controller@4400a004 { + compatible = "st,stm32-sai-sub-a"; + #sound-dai-cells = <0>; + reg = <0x4 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + dma-names = "tx"; + }; + }; + +... -- 2.17.1

2 3

[alsa-devel] minor aplay man page correction
by GitHub pull_request - edited 11 Feb '20

11 Feb '20

alsa-project/alsa-utils pull request #34 was edited from YetAnotherNerd: Request URL : https://github.com/alsa-project/alsa-utils/pull/34 Patch URL : https://github.com/alsa-project/alsa-utils/pull/34.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[alsa-devel] [PATCH] [RFC] ASoC: Use imply for SND_SOC_ALL_CODECS
by Geert Uytterhoeven 11 Feb '20

11 Feb '20

Currently SND_SOC_ALL_CODECS selects the config symbols for all codec drivers. As "select" bypasses dependencies, lots of "select" statements need explicit dependencies, which are hard to get right, and hard to maintain[*]. Fix this by using "imply" instead, which is a weak version of "select", and which obeys dependencies of target symbols. Add dependencies to invisible symbols that are currently selected only if their dependencies are fulfilled. [*] See e.g. commit 13426feaf46c48fc ("ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS"). Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- Does this sound like a good solution? Anything I'm missing w.r.t. the "imply" semantics? FIXME Nothing but SND_SOC_ALL_CODECS selects SND_SOC_WM8400! Tested with m68k/allmodconfig and m68k/allyesconfig only. Hence some other invisible symbols may still have missing dependencies. --- sound/soc/codecs/Kconfig | 520 ++++++++++++++++++++------------------- 1 file changed, 263 insertions(+), 257 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 7e90f5d830971309..7a14b1c416b55e46 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -14,262 +14,262 @@ menu "CODEC drivers" config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" depends on COMPILE_TEST - select SND_SOC_88PM860X if MFD_88PM860X - select SND_SOC_L3 - select SND_SOC_AB8500_CODEC if ABX500_CORE - select SND_SOC_AC97_CODEC - select SND_SOC_AD1836 if SPI_MASTER - select SND_SOC_AD193X_SPI if SPI_MASTER - select SND_SOC_AD193X_I2C if I2C - select SND_SOC_AD1980 if SND_SOC_AC97_BUS - select SND_SOC_AD73311 - select SND_SOC_ADAU1373 if I2C - select SND_SOC_ADAU1761_I2C if I2C - select SND_SOC_ADAU1761_SPI if SPI - select SND_SOC_ADAU1781_I2C if I2C - select SND_SOC_ADAU1781_SPI if SPI - select SND_SOC_ADAV801 if SPI_MASTER - select SND_SOC_ADAV803 if I2C - select SND_SOC_ADAU1977_SPI if SPI_MASTER - select SND_SOC_ADAU1977_I2C if I2C - select SND_SOC_ADAU1701 if I2C - select SND_SOC_ADAU7002 - select SND_SOC_ADAU7118_I2C if I2C - select SND_SOC_ADAU7118_HW - select SND_SOC_ADS117X - select SND_SOC_AK4104 if SPI_MASTER - select SND_SOC_AK4118 if I2C - select SND_SOC_AK4458 if I2C - select SND_SOC_AK4535 if I2C - select SND_SOC_AK4554 - select SND_SOC_AK4613 if I2C - select SND_SOC_AK4641 if I2C - select SND_SOC_AK4642 if I2C - select SND_SOC_AK4671 if I2C - select SND_SOC_AK5386 - select SND_SOC_AK5558 if I2C - select SND_SOC_ALC5623 if I2C - select SND_SOC_ALC5632 if I2C - select SND_SOC_BT_SCO - select SND_SOC_BD28623 - select SND_SOC_CQ0093VC - select SND_SOC_CROS_EC_CODEC if CROS_EC - select SND_SOC_CS35L32 if I2C - select SND_SOC_CS35L33 if I2C - select SND_SOC_CS35L34 if I2C - select SND_SOC_CS35L35 if I2C - select SND_SOC_CS35L36 if I2C - select SND_SOC_CS42L42 if I2C - select SND_SOC_CS42L51_I2C if I2C - select SND_SOC_CS42L52 if I2C && INPUT - select SND_SOC_CS42L56 if I2C && INPUT - select SND_SOC_CS42L73 if I2C - select SND_SOC_CS4265 if I2C - select SND_SOC_CS4270 if I2C - select SND_SOC_CS4271_I2C if I2C - select SND_SOC_CS4271_SPI if SPI_MASTER - select SND_SOC_CS42XX8_I2C if I2C - select SND_SOC_CS43130 if I2C - select SND_SOC_CS4341 if SND_SOC_I2C_AND_SPI - select SND_SOC_CS4349 if I2C - select SND_SOC_CS47L15 if MFD_CS47L15 - select SND_SOC_CS47L24 if MFD_CS47L24 - select SND_SOC_CS47L35 if MFD_CS47L35 - select SND_SOC_CS47L85 if MFD_CS47L85 - select SND_SOC_CS47L90 if MFD_CS47L90 - select SND_SOC_CS47L92 if MFD_CS47L92 - select SND_SOC_CS53L30 if I2C - select SND_SOC_CX20442 if TTY - select SND_SOC_CX2072X if I2C - select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI - select SND_SOC_DA7213 if I2C - select SND_SOC_DA7218 if I2C - select SND_SOC_DA7219 if I2C - select SND_SOC_DA732X if I2C - select SND_SOC_DA9055 if I2C - select SND_SOC_DMIC if GPIOLIB - select SND_SOC_ES8316 if I2C - select SND_SOC_ES8328_SPI if SPI_MASTER - select SND_SOC_ES8328_I2C if I2C - select SND_SOC_ES7134 - select SND_SOC_ES7241 - select SND_SOC_GTM601 - select SND_SOC_HDAC_HDMI - select SND_SOC_HDAC_HDA - select SND_SOC_ICS43432 - select SND_SOC_INNO_RK3036 - select SND_SOC_ISABELLE if I2C - select SND_SOC_JZ4740_CODEC - select SND_SOC_JZ4725B_CODEC - select SND_SOC_JZ4770_CODEC - select SND_SOC_LM4857 if I2C - select SND_SOC_LM49453 if I2C - select SND_SOC_LOCHNAGAR_SC if MFD_LOCHNAGAR - select SND_SOC_MAX98088 if I2C - select SND_SOC_MAX98090 if I2C - select SND_SOC_MAX98095 if I2C - select SND_SOC_MAX98357A if GPIOLIB - select SND_SOC_MAX98371 if I2C - select SND_SOC_MAX98504 if I2C - select SND_SOC_MAX9867 if I2C - select SND_SOC_MAX98925 if I2C - select SND_SOC_MAX98926 if I2C - select SND_SOC_MAX98927 if I2C - select SND_SOC_MAX98373 if I2C - select SND_SOC_MAX9850 if I2C - select SND_SOC_MAX9860 if I2C - select SND_SOC_MAX9759 - select SND_SOC_MAX9768 if I2C - select SND_SOC_MAX9877 if I2C - select SND_SOC_MC13783 if MFD_MC13XXX - select SND_SOC_ML26124 if I2C - select SND_SOC_MT6351 if MTK_PMIC_WRAP - select SND_SOC_MT6358 if MTK_PMIC_WRAP - select SND_SOC_MT6660 if I2C - select SND_SOC_NAU8540 if I2C - select SND_SOC_NAU8810 if I2C - select SND_SOC_NAU8822 if I2C - select SND_SOC_NAU8824 if I2C - select SND_SOC_NAU8825 if I2C - select SND_SOC_HDMI_CODEC - select SND_SOC_PCM1681 if I2C - select SND_SOC_PCM1789_I2C if I2C - select SND_SOC_PCM179X_I2C if I2C - select SND_SOC_PCM179X_SPI if SPI_MASTER - select SND_SOC_PCM186X_I2C if I2C - select SND_SOC_PCM186X_SPI if SPI_MASTER - select SND_SOC_PCM3008 - select SND_SOC_PCM3060_I2C if I2C - select SND_SOC_PCM3060_SPI if SPI_MASTER - select SND_SOC_PCM3168A_I2C if I2C - select SND_SOC_PCM3168A_SPI if SPI_MASTER - select SND_SOC_PCM5102A - select SND_SOC_PCM512x_I2C if I2C - select SND_SOC_PCM512x_SPI if SPI_MASTER - select SND_SOC_RK3328 - select SND_SOC_RT274 if I2C - select SND_SOC_RT286 if I2C - select SND_SOC_RT298 if I2C - select SND_SOC_RT1011 if I2C - select SND_SOC_RT1015 if I2C - select SND_SOC_RT1305 if I2C - select SND_SOC_RT1308 if I2C - select SND_SOC_RT5514 if I2C - select SND_SOC_RT5616 if I2C - select SND_SOC_RT5631 if I2C - select SND_SOC_RT5640 if I2C - select SND_SOC_RT5645 if I2C - select SND_SOC_RT5651 if I2C - select SND_SOC_RT5659 if I2C - select SND_SOC_RT5660 if I2C - select SND_SOC_RT5663 if I2C - select SND_SOC_RT5665 if I2C - select SND_SOC_RT5668 if I2C - select SND_SOC_RT5670 if I2C - select SND_SOC_RT5677 if I2C && SPI_MASTER - select SND_SOC_RT5682 if I2C - select SND_SOC_RT700_SDW if SOUNDWIRE - select SND_SOC_RT711_SDW if SOUNDWIRE - select SND_SOC_RT715_SDW if SOUNDWIRE - select SND_SOC_RT1308_SDW if SOUNDWIRE - select SND_SOC_SGTL5000 if I2C - select SND_SOC_SI476X if MFD_SI476X_CORE - select SND_SOC_SIMPLE_AMPLIFIER - select SND_SOC_SIRF_AUDIO_CODEC - select SND_SOC_SPDIF - select SND_SOC_SSM2305 - select SND_SOC_SSM2518 if I2C - select SND_SOC_SSM2602_SPI if SPI_MASTER - select SND_SOC_SSM2602_I2C if I2C - select SND_SOC_SSM4567 if I2C - select SND_SOC_STA32X if I2C - select SND_SOC_STA350 if I2C - select SND_SOC_STA529 if I2C - select SND_SOC_STAC9766 if SND_SOC_AC97_BUS - select SND_SOC_STI_SAS - select SND_SOC_TAS2552 if I2C - select SND_SOC_TAS2562 if I2C - select SND_SOC_TAS2770 if I2C - select SND_SOC_TAS5086 if I2C - select SND_SOC_TAS571X if I2C - select SND_SOC_TAS5720 if I2C - select SND_SOC_TAS6424 if I2C - select SND_SOC_TDA7419 if I2C - select SND_SOC_TFA9879 if I2C - select SND_SOC_TLV320AIC23_I2C if I2C - select SND_SOC_TLV320AIC23_SPI if SPI_MASTER - select SND_SOC_TLV320AIC26 if SPI_MASTER - select SND_SOC_TLV320AIC31XX if I2C - select SND_SOC_TLV320AIC32X4_I2C if I2C && COMMON_CLK - select SND_SOC_TLV320AIC32X4_SPI if SPI_MASTER && COMMON_CLK - select SND_SOC_TLV320AIC3X if I2C - select SND_SOC_TPA6130A2 if I2C - select SND_SOC_TLV320DAC33 if I2C - select SND_SOC_TSCS42XX if I2C - select SND_SOC_TSCS454 if I2C - select SND_SOC_TS3A227E if I2C - select SND_SOC_TWL4030 if TWL4030_CORE - select SND_SOC_TWL6040 if TWL6040_CORE - select SND_SOC_UDA1334 if GPIOLIB - select SND_SOC_UDA134X - select SND_SOC_UDA1380 if I2C - select SND_SOC_WCD9335 if SLIMBUS - select SND_SOC_WCD934X if MFD_WCD934X && COMMON_CLK - select SND_SOC_WL1273 if MFD_WL1273_CORE - select SND_SOC_WM0010 if SPI_MASTER - select SND_SOC_WM1250_EV1 if I2C - select SND_SOC_WM2000 if I2C - select SND_SOC_WM2200 if I2C - select SND_SOC_WM5100 if I2C - select SND_SOC_WM5102 if MFD_WM5102 - select SND_SOC_WM5110 if MFD_WM5110 - select SND_SOC_WM8350 if MFD_WM8350 - select SND_SOC_WM8400 if MFD_WM8400 - select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8523 if I2C - select SND_SOC_WM8524 if GPIOLIB - select SND_SOC_WM8580 if I2C - select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8727 - select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8737 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8770 if SPI_MASTER - select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8782 - select SND_SOC_WM8804_I2C if I2C - select SND_SOC_WM8804_SPI if SPI_MASTER - select SND_SOC_WM8900 if I2C - select SND_SOC_WM8903 if I2C - select SND_SOC_WM8904 if I2C - select SND_SOC_WM8940 if I2C - select SND_SOC_WM8955 if I2C - select SND_SOC_WM8960 if I2C - select SND_SOC_WM8961 if I2C - select SND_SOC_WM8962 if I2C && INPUT - select SND_SOC_WM8971 if I2C - select SND_SOC_WM8974 if I2C - select SND_SOC_WM8978 if I2C - select SND_SOC_WM8983 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8985 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8990 if I2C - select SND_SOC_WM8991 if I2C - select SND_SOC_WM8993 if I2C - select SND_SOC_WM8994 if MFD_WM8994 - select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI - select SND_SOC_WM8996 if I2C - select SND_SOC_WM8997 if MFD_WM8997 - select SND_SOC_WM8998 if MFD_WM8998 - select SND_SOC_WM9081 if I2C - select SND_SOC_WM9090 if I2C - select SND_SOC_WM9705 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) - select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) - select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) - select SND_SOC_WSA881X if SOUNDWIRE + imply SND_SOC_88PM860X + imply SND_SOC_L3 + imply SND_SOC_AB8500_CODEC + imply SND_SOC_AC97_CODEC + imply SND_SOC_AD1836 + imply SND_SOC_AD193X_SPI + imply SND_SOC_AD193X_I2C + imply SND_SOC_AD1980 + imply SND_SOC_AD73311 + imply SND_SOC_ADAU1373 + imply SND_SOC_ADAU1761_I2C + imply SND_SOC_ADAU1761_SPI + imply SND_SOC_ADAU1781_I2C + imply SND_SOC_ADAU1781_SPI + imply SND_SOC_ADAV801 + imply SND_SOC_ADAV803 + imply SND_SOC_ADAU1977_SPI + imply SND_SOC_ADAU1977_I2C + imply SND_SOC_ADAU1701 + imply SND_SOC_ADAU7002 + imply SND_SOC_ADAU7118_I2C + imply SND_SOC_ADAU7118_HW + imply SND_SOC_ADS117X + imply SND_SOC_AK4104 + imply SND_SOC_AK4118 + imply SND_SOC_AK4458 + imply SND_SOC_AK4535 + imply SND_SOC_AK4554 + imply SND_SOC_AK4613 + imply SND_SOC_AK4641 + imply SND_SOC_AK4642 + imply SND_SOC_AK4671 + imply SND_SOC_AK5386 + imply SND_SOC_AK5558 + imply SND_SOC_ALC5623 + imply SND_SOC_ALC5632 + imply SND_SOC_BT_SCO + imply SND_SOC_BD28623 + imply SND_SOC_CQ0093VC + imply SND_SOC_CROS_EC_CODEC + imply SND_SOC_CS35L32 + imply SND_SOC_CS35L33 + imply SND_SOC_CS35L34 + imply SND_SOC_CS35L35 + imply SND_SOC_CS35L36 + imply SND_SOC_CS42L42 + imply SND_SOC_CS42L51_I2C + imply SND_SOC_CS42L52 + imply SND_SOC_CS42L56 + imply SND_SOC_CS42L73 + imply SND_SOC_CS4265 + imply SND_SOC_CS4270 + imply SND_SOC_CS4271_I2C + imply SND_SOC_CS4271_SPI + imply SND_SOC_CS42XX8_I2C + imply SND_SOC_CS43130 + imply SND_SOC_CS4341 + imply SND_SOC_CS4349 + imply SND_SOC_CS47L15 + imply SND_SOC_CS47L24 + imply SND_SOC_CS47L35 + imply SND_SOC_CS47L85 + imply SND_SOC_CS47L90 + imply SND_SOC_CS47L92 + imply SND_SOC_CS53L30 + imply SND_SOC_CX20442 + imply SND_SOC_CX2072X + imply SND_SOC_DA7210 + imply SND_SOC_DA7213 + imply SND_SOC_DA7218 + imply SND_SOC_DA7219 + imply SND_SOC_DA732X + imply SND_SOC_DA9055 + imply SND_SOC_DMIC + imply SND_SOC_ES8316 + imply SND_SOC_ES8328_SPI + imply SND_SOC_ES8328_I2C + imply SND_SOC_ES7134 + imply SND_SOC_ES7241 + imply SND_SOC_GTM601 + imply SND_SOC_HDAC_HDMI + imply SND_SOC_HDAC_HDA + imply SND_SOC_ICS43432 + imply SND_SOC_INNO_RK3036 + imply SND_SOC_ISABELLE + imply SND_SOC_JZ4740_CODEC + imply SND_SOC_JZ4725B_CODEC + imply SND_SOC_JZ4770_CODEC + imply SND_SOC_LM4857 + imply SND_SOC_LM49453 + imply SND_SOC_LOCHNAGAR_SC + imply SND_SOC_MAX98088 + imply SND_SOC_MAX98090 + imply SND_SOC_MAX98095 + imply SND_SOC_MAX98357A + imply SND_SOC_MAX98371 + imply SND_SOC_MAX98504 + imply SND_SOC_MAX9867 + imply SND_SOC_MAX98925 + imply SND_SOC_MAX98926 + imply SND_SOC_MAX98927 + imply SND_SOC_MAX98373 + imply SND_SOC_MAX9850 + imply SND_SOC_MAX9860 + imply SND_SOC_MAX9759 + imply SND_SOC_MAX9768 + imply SND_SOC_MAX9877 + imply SND_SOC_MC13783 + imply SND_SOC_ML26124 + imply SND_SOC_MT6351 + imply SND_SOC_MT6358 + imply SND_SOC_MT6660 + imply SND_SOC_NAU8540 + imply SND_SOC_NAU8810 + imply SND_SOC_NAU8822 + imply SND_SOC_NAU8824 + imply SND_SOC_NAU8825 + imply SND_SOC_HDMI_CODEC + imply SND_SOC_PCM1681 + imply SND_SOC_PCM1789_I2C + imply SND_SOC_PCM179X_I2C + imply SND_SOC_PCM179X_SPI + imply SND_SOC_PCM186X_I2C + imply SND_SOC_PCM186X_SPI + imply SND_SOC_PCM3008 + imply SND_SOC_PCM3060_I2C + imply SND_SOC_PCM3060_SPI + imply SND_SOC_PCM3168A_I2C + imply SND_SOC_PCM3168A_SPI + imply SND_SOC_PCM5102A + imply SND_SOC_PCM512x_I2C + imply SND_SOC_PCM512x_SPI + imply SND_SOC_RK3328 + imply SND_SOC_RT274 + imply SND_SOC_RT286 + imply SND_SOC_RT298 + imply SND_SOC_RT1011 + imply SND_SOC_RT1015 + imply SND_SOC_RT1305 + imply SND_SOC_RT1308 + imply SND_SOC_RT5514 + imply SND_SOC_RT5616 + imply SND_SOC_RT5631 + imply SND_SOC_RT5640 + imply SND_SOC_RT5645 + imply SND_SOC_RT5651 + imply SND_SOC_RT5659 + imply SND_SOC_RT5660 + imply SND_SOC_RT5663 + imply SND_SOC_RT5665 + imply SND_SOC_RT5668 + imply SND_SOC_RT5670 + imply SND_SOC_RT5677 + imply SND_SOC_RT5682 + imply SND_SOC_RT700_SDW + imply SND_SOC_RT711_SDW + imply SND_SOC_RT715_SDW + imply SND_SOC_RT1308_SDW + imply SND_SOC_SGTL5000 + imply SND_SOC_SI476X + imply SND_SOC_SIMPLE_AMPLIFIER + imply SND_SOC_SIRF_AUDIO_CODEC + imply SND_SOC_SPDIF + imply SND_SOC_SSM2305 + imply SND_SOC_SSM2518 + imply SND_SOC_SSM2602_SPI + imply SND_SOC_SSM2602_I2C + imply SND_SOC_SSM4567 + imply SND_SOC_STA32X + imply SND_SOC_STA350 + imply SND_SOC_STA529 + imply SND_SOC_STAC9766 + imply SND_SOC_STI_SAS + imply SND_SOC_TAS2552 + imply SND_SOC_TAS2562 + imply SND_SOC_TAS2770 + imply SND_SOC_TAS5086 + imply SND_SOC_TAS571X + imply SND_SOC_TAS5720 + imply SND_SOC_TAS6424 + imply SND_SOC_TDA7419 + imply SND_SOC_TFA9879 + imply SND_SOC_TLV320AIC23_I2C + imply SND_SOC_TLV320AIC23_SPI + imply SND_SOC_TLV320AIC26 + imply SND_SOC_TLV320AIC31XX + imply SND_SOC_TLV320AIC32X4_I2C + imply SND_SOC_TLV320AIC32X4_SPI + imply SND_SOC_TLV320AIC3X + imply SND_SOC_TPA6130A2 + imply SND_SOC_TLV320DAC33 + imply SND_SOC_TSCS42XX + imply SND_SOC_TSCS454 + imply SND_SOC_TS3A227E + imply SND_SOC_TWL4030 + imply SND_SOC_TWL6040 + imply SND_SOC_UDA1334 + imply SND_SOC_UDA134X + imply SND_SOC_UDA1380 + imply SND_SOC_WCD9335 + imply SND_SOC_WCD934X + imply SND_SOC_WL1273 + imply SND_SOC_WM0010 + imply SND_SOC_WM1250_EV1 + imply SND_SOC_WM2000 + imply SND_SOC_WM2200 + imply SND_SOC_WM5100 + imply SND_SOC_WM5102 + imply SND_SOC_WM5110 + imply SND_SOC_WM8350 + imply SND_SOC_WM8400 + imply SND_SOC_WM8510 + imply SND_SOC_WM8523 + imply SND_SOC_WM8524 + imply SND_SOC_WM8580 + imply SND_SOC_WM8711 + imply SND_SOC_WM8727 + imply SND_SOC_WM8728 + imply SND_SOC_WM8731 + imply SND_SOC_WM8737 + imply SND_SOC_WM8741 + imply SND_SOC_WM8750 + imply SND_SOC_WM8753 + imply SND_SOC_WM8770 + imply SND_SOC_WM8776 + imply SND_SOC_WM8782 + imply SND_SOC_WM8804_I2C + imply SND_SOC_WM8804_SPI + imply SND_SOC_WM8900 + imply SND_SOC_WM8903 + imply SND_SOC_WM8904 + imply SND_SOC_WM8940 + imply SND_SOC_WM8955 + imply SND_SOC_WM8960 + imply SND_SOC_WM8961 + imply SND_SOC_WM8962 + imply SND_SOC_WM8971 + imply SND_SOC_WM8974 + imply SND_SOC_WM8978 + imply SND_SOC_WM8983 + imply SND_SOC_WM8985 + imply SND_SOC_WM8988 + imply SND_SOC_WM8990 + imply SND_SOC_WM8991 + imply SND_SOC_WM8993 + imply SND_SOC_WM8994 + imply SND_SOC_WM8995 + imply SND_SOC_WM8996 + imply SND_SOC_WM8997 + imply SND_SOC_WM8998 + imply SND_SOC_WM9081 + imply SND_SOC_WM9090 + imply SND_SOC_WM9705 + imply SND_SOC_WM9712 + imply SND_SOC_WM9713 + imply SND_SOC_WSA881X help Normally ASoC codec drivers are only built if a machine driver which uses them is also built since they are only usable with a machine @@ -283,6 +283,7 @@ config SND_SOC_ALL_CODECS config SND_SOC_88PM860X tristate + depends on MFD_88PM860X config SND_SOC_ARIZONA tristate @@ -1301,11 +1302,13 @@ config SND_SOC_TSCS454 Add support for Tempo Semiconductor's TSCS454 audio CODEC. config SND_SOC_TWL4030 - select MFD_TWL4030_AUDIO tristate + depends on TWL4030_CORE + select MFD_TWL4030_AUDIO config SND_SOC_TWL6040 tristate + depends on TWL6040_CORE config SND_SOC_UDA1334 tristate "NXP UDA1334 DAC" @@ -1366,9 +1369,12 @@ config SND_SOC_WM5110 config SND_SOC_WM8350 tristate + depends on MFD_WM8350 config SND_SOC_WM8400 tristate + # FIXME nothing selects SND_SOC_WM8400?? + depends on MFD_WM8400 config SND_SOC_WM8510 tristate "Wolfson Microelectronics WM8510 CODEC" -- 2.17.1

3 6

[alsa-devel] [PATCH 1/2] dt-bindings: sound: Add TLV320ADCx140 dt bindings
by Dan Murphy 11 Feb '20

11 Feb '20

Add dt bindings for the TLV320ADCx140 Burr-Brown ADC. The initial support is for the following: TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140 TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140 TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140 CC: Rob Herring <robh(a)kernel.org> Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- .../bindings/sound/tlv320adcx140.yaml | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml new file mode 100644 index 000000000000..84c407fae21e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter + +maintainers: + - Dan Murphy <dmurphy(a)ti.com> + +description: | + The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital + PDM microphones recording), high-performance audio, analog-to-digital + converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140 + family supports line and microphone Inputs, and offers a programmable + microphone bias or supply voltage generation. + + Specifications can be found at: + http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf + +properties: + compatible: + oneOf: + - const: ti,tlv320adc3140 + - const: ti,tlv320adc5140 + - const: ti,tlv320adc6140 + + reg: + maxItems: 1 + description: | + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpios: + description: | + GPIO used for hardware reset. + + ti,use-internal-areg: + type: boolean + description: | + Internal Regulator with AVDD at 3.3V. + + ti,mic-bias-source: + description: | + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 6] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tlv320adc5140"; + reg = <0x4c>; + ti,use-internal-areg; + ti,mic-bias-source = <6>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; -- 2.25.0

2 3

[alsa-devel] fix typo
by GitHub pull_request - opened 11 Feb '20

11 Feb '20

alsa-project/alsa-utils pull request #34 was opened from YetAnotherNerd: Request URL : https://github.com/alsa-project/alsa-utils/pull/34 Patch URL : https://github.com/alsa-project/alsa-utils/pull/34.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[alsa-devel] [PATCH] ALSA: usb-audio: Fix UAC2/3 effect unit parsing
by Takashi Iwai 11 Feb '20

11 Feb '20

We've got a regression report about M-Audio Fast Track C400 device, and the git bisection resulted in the commit e0ccdef92653 ("ALSA: usb-audio: Clean up check_input_term()"). This commit was about the rewrite of the input terminal parser, and it's not too obvious from the change what really broke. The answer is: it's the interpretation of UAC2/3 effect units. In the original code, UAC2 effect unit is as if through UAC1 processing unit because both UAC1 PU and UAC2/3 EU share the same number (0x07). The old code went through a complex switch-case fallthrough, finally bailing out in the middle: if (protocol == UAC_VERSION_2 && hdr[2] == UAC2_EFFECT_UNIT) { /* UAC2/UAC1 unit IDs overlap here in an * uncompatible way. Ignore this unit for now. */ return 0; } ... and this special handling was missing in the new code; the new code treats UAC2/3 effect unit as if it were equivalent with the processing unit. Actually, the old code was too confusing. The effect unit has an incompatible unit description with the processing unit, so we shouldn't have dealt with EU in the same way. This patch addresses the regression by changing the effect unit handling to the own parser function. The own parser function makes the clear distinct with PU, so it improves the readability, too. The EU parser just sets the type and the id like the old kernels. Once when the proper effect unit support is added, we can revisit this parser function, but for now, let's keep this simple setup as is. Fixes: e0ccdef92653 ("ALSA: usb-audio: Clean up check_input_term()") Cc: <stable(a)vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206147 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/mixer.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index d659fdb475e2..81b2db0edd5f 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -897,6 +897,15 @@ static int parse_term_proc_unit(struct mixer_build *state, return 0; } +static int parse_term_effect_unit(struct mixer_build *state, + struct usb_audio_term *term, + void *p1, int id) +{ + term->type = UAC3_EFFECT_UNIT << 16; /* virtual type */ + term->id = id; + return 0; +} + static int parse_term_uac2_clock_source(struct mixer_build *state, struct usb_audio_term *term, void *p1, int id) @@ -981,8 +990,7 @@ static int __check_input_term(struct mixer_build *state, int id, UAC3_PROCESSING_UNIT); case PTYPE(UAC_VERSION_2, UAC2_EFFECT_UNIT): case PTYPE(UAC_VERSION_3, UAC3_EFFECT_UNIT): - return parse_term_proc_unit(state, term, p1, id, - UAC3_EFFECT_UNIT); + return parse_term_effect_unit(state, term, p1, id); case PTYPE(UAC_VERSION_1, UAC1_EXTENSION_UNIT): case PTYPE(UAC_VERSION_2, UAC2_EXTENSION_UNIT_V2): case PTYPE(UAC_VERSION_3, UAC3_EXTENSION_UNIT): -- 2.16.4

1 0