February 2020 - Alsa-devel - mailman.alsa-project.org

Re: [PATCH 3/3] ASoC: meson: aiu: add support for the Meson8 and Meson8b SoC families
by Jerome Brunet 21 Feb '20

21 Feb '20

On Thu 20 Feb 2020 at 21:57, Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> wrote: > The AIU audio controller on the Meson8 and Meson8b SoC families is > compatible with the one found in the later GXBB family. Add compatible > strings for these two older SoC families so the driver can be loaded for > them. > > Instead of using the I2S divider from the AIU_CLK_CTRL_MORE register we > need to use the I2S divider from the AIU_CLK_CTRL register. This older > register is less flexible because it only supports four divider settings > (1, 2, 4, 8) compared to the AIU_CLK_CTRL_MORE register (which supports > dividers in the range 0..64). > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> Reviewed-by: Jerome Brunet <jbrunet(a)baylibre.com> > --- > sound/soc/meson/Kconfig | 2 +- > sound/soc/meson/aiu-encoder-i2s.c | 92 +++++++++++++++++++++++-------- > sound/soc/meson/aiu.c | 9 +++ > sound/soc/meson/aiu.h | 1 + > 4 files changed, 81 insertions(+), 23 deletions(-) > > diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig > index 897a706dcda0..d27e9180b453 100644 > --- a/sound/soc/meson/Kconfig > +++ b/sound/soc/meson/Kconfig > @@ -10,7 +10,7 @@ config SND_MESON_AIU > imply SND_SOC_HDMI_CODEC if DRM_MESON_DW_HDMI > help > Select Y or M to add support for the Audio output subsystem found > - in the Amlogic GX SoC family > + in the Amlogic Meson8, Meson8b and GX SoC families > > config SND_MESON_AXG_FIFO > tristate > diff --git a/sound/soc/meson/aiu-encoder-i2s.c b/sound/soc/meson/aiu-encoder-i2s.c > index 4900e38e7e49..cc73b5d5c2b7 100644 > --- a/sound/soc/meson/aiu-encoder-i2s.c > +++ b/sound/soc/meson/aiu-encoder-i2s.c > @@ -111,34 +111,40 @@ static int aiu_encoder_i2s_setup_desc(struct snd_soc_component *component, > return 0; > } > > -static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component, > - struct snd_pcm_hw_params *params) > +static int aiu_encoder_i2s_set_legacy_div(struct snd_soc_component *component, > + struct snd_pcm_hw_params *params, > + unsigned int bs) > { > - struct aiu *aiu = snd_soc_component_get_drvdata(component); > - unsigned int srate = params_rate(params); > - unsigned int fs, bs; > - > - /* Get the oversampling factor */ > - fs = DIV_ROUND_CLOSEST(clk_get_rate(aiu->i2s.clks[MCLK].clk), srate); > + switch (bs) { > + case 1: > + case 2: > + case 4: > + case 8: > + /* These are the only valid legacy dividers */ > + break; I wonder how it will work with the 8ch mode and 16bits but we can deal with this later on. > > - if (fs % 64) > + default: > + dev_err(component->dev, "Unsupported i2s divider: %u\n", bs); > return -EINVAL; > + }; > > - /* Send data MSB first */ > - snd_soc_component_update_bits(component, AIU_I2S_DAC_CFG, > - AIU_I2S_DAC_CFG_MSB_FIRST, > - AIU_I2S_DAC_CFG_MSB_FIRST); > + snd_soc_component_update_bits(component, AIU_CLK_CTRL, > + AIU_CLK_CTRL_I2S_DIV, > + FIELD_PREP(AIU_CLK_CTRL_I2S_DIV, > + __ffs(bs))); > > - /* Set bclk to lrlck ratio */ > - snd_soc_component_update_bits(component, AIU_CODEC_DAC_LRCLK_CTRL, > - AIU_CODEC_DAC_LRCLK_CTRL_DIV, > - FIELD_PREP(AIU_CODEC_DAC_LRCLK_CTRL_DIV, > - 64 - 1)); > + snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE, > + AIU_CLK_CTRL_MORE_I2S_DIV, > + FIELD_PREP(AIU_CLK_CTRL_MORE_I2S_DIV, > + 0)); > > - /* Use CLK_MORE for mclk to bclk divider */ > - snd_soc_component_update_bits(component, AIU_CLK_CTRL, > - AIU_CLK_CTRL_I2S_DIV, 0); > + return 0; > +} > > +static int aiu_encoder_i2s_set_more_div(struct snd_soc_component *component, > + struct snd_pcm_hw_params *params, > + unsigned int bs) > +{ > /* > * NOTE: this HW is odd. > * In most configuration, the i2s divider is 'mclk / blck'. > @@ -146,7 +152,6 @@ static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component, > * increased by 50% to get the correct output rate. > * No idea why ! > */ > - bs = fs / 64; > if (params_width(params) == 16 && params_channels(params) == 8) { > if (bs % 2) { > dev_err(component->dev, > @@ -156,11 +161,54 @@ static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component, > bs += bs / 2; > } > > + /* Use CLK_MORE for mclk to bclk divider */ > + snd_soc_component_update_bits(component, AIU_CLK_CTRL, > + AIU_CLK_CTRL_I2S_DIV, > + FIELD_PREP(AIU_CLK_CTRL_I2S_DIV, 0)); > + > snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE, > AIU_CLK_CTRL_MORE_I2S_DIV, > FIELD_PREP(AIU_CLK_CTRL_MORE_I2S_DIV, > bs - 1)); > > + return 0; > +} > + > +static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component, > + struct snd_pcm_hw_params *params) > +{ > + struct aiu *aiu = snd_soc_component_get_drvdata(component); > + unsigned int srate = params_rate(params); > + unsigned int fs, bs; > + int ret; > + > + /* Get the oversampling factor */ > + fs = DIV_ROUND_CLOSEST(clk_get_rate(aiu->i2s.clks[MCLK].clk), srate); > + > + if (fs % 64) > + return -EINVAL; > + > + /* Send data MSB first */ > + snd_soc_component_update_bits(component, AIU_I2S_DAC_CFG, > + AIU_I2S_DAC_CFG_MSB_FIRST, > + AIU_I2S_DAC_CFG_MSB_FIRST); > + > + /* Set bclk to lrlck ratio */ > + snd_soc_component_update_bits(component, AIU_CODEC_DAC_LRCLK_CTRL, > + AIU_CODEC_DAC_LRCLK_CTRL_DIV, > + FIELD_PREP(AIU_CODEC_DAC_LRCLK_CTRL_DIV, > + 64 - 1)); > + > + bs = fs / 64; > + > + if (aiu->platform->has_clk_ctrl_more_i2s_div) > + ret = aiu_encoder_i2s_set_more_div(component, params, bs); > + else > + ret = aiu_encoder_i2s_set_legacy_div(component, params, bs); > + > + if (ret) > + return ret; > + > /* Make sure amclk is used for HDMI i2s as well */ > snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE, > AIU_CLK_CTRL_MORE_HDMI_AMCLK, > diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c > index 38209312a8c3..dc35ca79021c 100644 > --- a/sound/soc/meson/aiu.c > +++ b/sound/soc/meson/aiu.c > @@ -351,15 +351,24 @@ static int aiu_remove(struct platform_device *pdev) > > static const struct aiu_platform_data aiu_gxbb_pdata = { > .has_acodec = false, > + .has_clk_ctrl_more_i2s_div = true, > }; > > static const struct aiu_platform_data aiu_gxl_pdata = { > .has_acodec = true, > + .has_clk_ctrl_more_i2s_div = true, > +}; > + > +static const struct aiu_platform_data aiu_meson8_pdata = { > + .has_acodec = false, > + .has_clk_ctrl_more_i2s_div = false, > }; > > static const struct of_device_id aiu_of_match[] = { > { .compatible = "amlogic,aiu-gxbb", .data = &aiu_gxbb_pdata }, > { .compatible = "amlogic,aiu-gxl", .data = &aiu_gxl_pdata }, > + { .compatible = "amlogic,aiu-meson8", .data = &aiu_meson8_pdata }, > + { .compatible = "amlogic,aiu-meson8b", .data = &aiu_meson8_pdata }, > {} > }; > MODULE_DEVICE_TABLE(of, aiu_of_match); > diff --git a/sound/soc/meson/aiu.h b/sound/soc/meson/aiu.h > index ab003638d5e5..87aa19ac4af3 100644 > --- a/sound/soc/meson/aiu.h > +++ b/sound/soc/meson/aiu.h > @@ -29,6 +29,7 @@ struct aiu_interface { > > struct aiu_platform_data { > bool has_acodec; > + bool has_clk_ctrl_more_i2s_div; > }; > > struct aiu {

1 0

Re: [PATCH 2/3] ASoC: meson: aiu: introduce a struct for platform specific information
by Jerome Brunet 21 Feb '20

21 Feb '20

On Thu 20 Feb 2020 at 21:57, Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> wrote: > Introduce a struct aiu_platform_data to make the driver aware of > platform specific information. Convert the existing check for the > internal stereo audio codec (only available on GXL) to this new struct. > Support for the 32-bit SoCs will need this as well because the > AIU_CLK_CTRL_MORE register doesn't have the I2S divider bits (and we > need to use the I2S divider from AIU_CLK_CTRL instead). > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> Reviewed-by: Jerome Brunet <jbrunet(a)baylibre.com> > --- > sound/soc/meson/aiu.c | 19 ++++++++++++++++--- > sound/soc/meson/aiu.h | 5 +++++ > 2 files changed, 21 insertions(+), 3 deletions(-) > > diff --git a/sound/soc/meson/aiu.c b/sound/soc/meson/aiu.c > index d3e2d40e9562..38209312a8c3 100644 > --- a/sound/soc/meson/aiu.c > +++ b/sound/soc/meson/aiu.c > @@ -273,6 +273,11 @@ static int aiu_probe(struct platform_device *pdev) > aiu = devm_kzalloc(dev, sizeof(*aiu), GFP_KERNEL); > if (!aiu) > return -ENOMEM; > + > + aiu->platform = device_get_match_data(dev); > + if (!aiu->platform) > + return -ENODEV; > + > platform_set_drvdata(pdev, aiu); > > ret = device_reset(dev); > @@ -322,7 +327,7 @@ static int aiu_probe(struct platform_device *pdev) > } > > /* Register the internal dac control component on gxl */ > - if (of_device_is_compatible(dev->of_node, "amlogic,aiu-gxl")) { > + if (aiu->platform->has_acodec) { > ret = aiu_acodec_ctrl_register_component(dev); > if (ret) { > dev_err(dev, > @@ -344,9 +349,17 @@ static int aiu_remove(struct platform_device *pdev) > return 0; > } > > +static const struct aiu_platform_data aiu_gxbb_pdata = { > + .has_acodec = false, > +}; > + > +static const struct aiu_platform_data aiu_gxl_pdata = { > + .has_acodec = true, > +}; > + > static const struct of_device_id aiu_of_match[] = { > - { .compatible = "amlogic,aiu-gxbb", }, > - { .compatible = "amlogic,aiu-gxl", }, > + { .compatible = "amlogic,aiu-gxbb", .data = &aiu_gxbb_pdata }, > + { .compatible = "amlogic,aiu-gxl", .data = &aiu_gxl_pdata }, > {} > }; > MODULE_DEVICE_TABLE(of, aiu_of_match); > diff --git a/sound/soc/meson/aiu.h b/sound/soc/meson/aiu.h > index 06a968c55728..ab003638d5e5 100644 > --- a/sound/soc/meson/aiu.h > +++ b/sound/soc/meson/aiu.h > @@ -27,11 +27,16 @@ struct aiu_interface { > int irq; > }; > > +struct aiu_platform_data { > + bool has_acodec; > +}; > + > struct aiu { > struct clk *pclk; > struct clk *spdif_mclk; > struct aiu_interface i2s; > struct aiu_interface spdif; > + const struct aiu_platform_data *platform; > }; > > #define AIU_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \

1 0

Re: [PATCH 1/3] ASoC: meson: aiu: Document Meson8 and Meson8b support in the dt-bindings
by Jerome Brunet 21 Feb '20

21 Feb '20

On Thu 20 Feb 2020 at 21:57, Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> wrote: > The AIU audio output controller on the Meson8 and Meson8b SoC families > is compatible with the one found in the GXBB family. Document the > compatible string for these two older SoCs. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> Reviewed-by: Jerome Brunet <jbrunet(a)baylibre.com> > --- > Documentation/devicetree/bindings/sound/amlogic,aiu.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > index 3ef7632dcb59..a61bccf915d8 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > @@ -21,6 +21,8 @@ properties: > - enum: > - amlogic,aiu-gxbb > - amlogic,aiu-gxl > + - amlogic,aiu-meson8 > + - amlogic,aiu-meson8b > - const: > amlogic,aiu

1 0

[PATCH 5.5 241/399] ASoC: txx9: Remove unused rtd variable
by Greg Kroah-Hartman 21 Feb '20

21 Feb '20

From: Paul Burton <paulburton(a)kernel.org> [ Upstream commit ec0f6a4c4a987aa20b2e77e0db2ae555276e45e6 ] Commit a857e073ffc6 ("ASoC: txx9: txx9aclc: remove snd_pcm_ops") removed the last use of the rtd variable but didn't remove its definition, leading to the following warning/error for MIPS rbtx49xx_defconfig builds: sound/soc/txx9/txx9aclc.c: In function 'txx9aclc_pcm_hw_params': sound/soc/txx9/txx9aclc.c:54:30: error: unused variable 'rtd' [-Werror=unused-variable] struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); ^~~ Resolve this by removing the unused variable. Signed-off-by: Paul Burton <paulburton(a)kernel.org> Fixes: a857e073ffc6 ("ASoC: txx9: txx9aclc: remove snd_pcm_ops") Cc: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org Link: https://lore.kernel.org/r/20200109191422.334516-1-paulburton@kernel.org Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/txx9/txx9aclc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c index 33c78d33e5a1d..9a55926ebf07b 100644 --- a/sound/soc/txx9/txx9aclc.c +++ b/sound/soc/txx9/txx9aclc.c @@ -51,7 +51,6 @@ static int txx9aclc_pcm_hw_params(struct snd_soc_component *component, struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); struct snd_pcm_runtime *runtime = substream->runtime; struct txx9aclc_dmadata *dmadata = runtime->private_data; int ret; -- 2.20.1

1 0

[alsa-devel] [PATCH v2] ASoC: dt-bindings: simple-card: switch to yaml base Documentation
by Kuninori Morimoto 21 Feb '20

21 Feb '20

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> This patch switches from .txt base to .yaml base Document. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- v1 -> v2 - add missing setup .../devicetree/bindings/sound/simple-card.txt | 351 ------------- .../bindings/sound/simple-card.yaml | 484 ++++++++++++++++++ 2 files changed, 484 insertions(+), 351 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/simple-card.txt create mode 100644 Documentation/devicetree/bindings/sound/simple-card.yaml diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt deleted file mode 100644 index 79954cd6e37b..000000000000 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ /dev/null @@ -1,351 +0,0 @@ -Simple-Card: - -Simple-Card specifies audio DAI connections of SoC <-> codec. - -Required properties: - -- compatible : "simple-audio-card" - -Optional properties: - -- simple-audio-card,name : User specified audio sound card name, one string - property. -- simple-audio-card,widgets : Please refer to widgets.txt. -- simple-audio-card,routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. -- simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec - mclk. When defined, mclk-fs property defined in - dai-link sub nodes are ignored. -- simple-audio-card,hp-det-gpio : Reference to GPIO that signals when - headphones are attached. -- simple-audio-card,mic-det-gpio : Reference to GPIO that signals when - a microphone is attached. -- simple-audio-card,aux-devs : List of phandles pointing to auxiliary devices, such - as amplifiers, to be added to the sound card. -- simple-audio-card,pin-switches : List of strings containing the widget names for - which pin switches must be created. - -Optional subnodes: - -- simple-audio-card,dai-link : Container for dai-link level - properties and the CPU and CODEC - sub-nodes. This container may be - omitted when the card has only one - DAI link. See the examples and the - section below. - -Dai-link subnode properties and subnodes: - -If dai-link subnode is omitted and the subnode properties are directly -under "sound"-node the subnode property and subnode names have to be -prefixed with "simple-audio-card,"-prefix. - -Required dai-link subnodes: - -- cpu : CPU sub-node -- codec : CODEC sub-node - -Optional dai-link subnode properties: - -- format : CPU/CODEC common audio format. - "i2s", "right_j", "left_j" , "dsp_a" - "dsp_b", "ac97", "pdm", "msb", "lsb" -- frame-master : Indicates dai-link frame master. - phandle to a cpu or codec subnode. -- bitclock-master : Indicates dai-link bit clock master. - phandle to a cpu or codec subnode. -- bitclock-inversion : bool property. Add this if the - dai-link uses bit clock inversion. -- frame-inversion : bool property. Add this if the - dai-link uses frame clock inversion. -- mclk-fs : Multiplication factor between stream - rate and codec mclk, applied only for - the dai-link. - -For backward compatibility the frame-master and bitclock-master -properties can be used as booleans in codec subnode to indicate if the -codec is the dai-link frame or bit clock master. In this case there -should be no dai-link node, the same properties should not be present -at sound-node level, and the bitclock-inversion and frame-inversion -properties should also be placed in the codec node if needed. - -Required CPU/CODEC subnodes properties: - -- sound-dai : phandle and port of CPU/CODEC - -Optional CPU/CODEC subnodes properties: - -- dai-tdm-slot-num : Please refer to tdm-slot.txt. -- dai-tdm-slot-width : Please refer to tdm-slot.txt. -- clocks / system-clock-frequency : specify subnode's clock if needed. - it can be specified via "clocks" if system has - clock node (= common clock), or "system-clock-frequency" - (if system doens't support common clock) - If a clock is specified, it is - enabled with clk_prepare_enable() - in dai startup() and disabled with - clk_disable_unprepare() in dai - shutdown(). - If a clock is specified and a - multiplication factor is given with - mclk-fs, the clock will be set to the - calculated mclk frequency when the - stream starts. -- system-clock-direction-out : specifies clock direction as 'out' on - initialization. It is useful for some aCPUs with - fixed clocks. - -------------------------------------------- -Example 1 - single DAI link: -------------------------------------------- - -sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "VF610-Tower-Sound-Card"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack", - "Speaker", "External Speaker"; - simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "Headphone Jack", "HP_OUT", - "External Speaker", "LINE_OUT"; - - simple-audio-card,cpu { - sound-dai = <&sh_fsi2 0>; - }; - - dailink0_master: simple-audio-card,codec { - sound-dai = <&ak4648>; - clocks = <&osc>; - }; -}; - -&i2c0 { - ak4648: ak4648@12 { - #sound-dai-cells = <0>; - compatible = "asahi-kasei,ak4648"; - reg = <0x12>; - }; -}; - -sh_fsi2: sh_fsi2@ec230000 { - #sound-dai-cells = <1>; - compatible = "renesas,sh_fsi2"; - reg = <0xec230000 0x400>; - interrupt-parent = <&gic>; - interrupts = <0 146 0x4>; -}; - -------------------------------------------- -Example 2 - many DAI links: -------------------------------------------- - -sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "Cubox Audio"; - - simple-audio-card,dai-link@0 { /* I2S - HDMI */ - reg = <0>; - format = "i2s"; - cpu { - sound-dai = <&audio1 0>; - }; - codec { - sound-dai = <&tda998x 0>; - }; - }; - - simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */ - reg = <1>; - cpu { - sound-dai = <&audio1 1>; - }; - codec { - sound-dai = <&tda998x 1>; - }; - }; - - simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */ - reg = <2>; - cpu { - sound-dai = <&audio1 1>; - }; - codec { - sound-dai = <&spdif_codec>; - }; - }; -}; - -------------------------------------------- -Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec -through TPA6130A2 amplifier to headphones: -------------------------------------------- - -&i2c0 { - codec: tlv320dac3100@18 { - compatible = "ti,tlv320dac3100"; - ... - } - - amp: tpa6130a2@60 { - compatible = "ti,tpa6130a2"; - ... - } -} - -sound { - compatible = "simple-audio-card"; - ... - simple-audio-card,widgets = - "Headphone", "Headphone Jack"; - simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT", - "LEFTIN", "HPL", - "RIGHTIN", "HPR"; - simple-audio-card,aux-devs = <&amp>; - simple-audio-card,cpu { - sound-dai = <&ssi2>; - }; - simple-audio-card,codec { - sound-dai = <&codec>; - clocks = ... - }; -}; - -------------------------------------------- -Example 4. Sampling Rate Conversion -------------------------------------------- - -sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - simple-audio-card,convert-rate = <48000>; - - simple-audio-card,prefix = "ak4642"; - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "DAI0 Capture", "ak4642 Capture"; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; - }; -}; - -------------------------------------------- -Example 5. 2 CPU 1 Codec (Mixing) -------------------------------------------- -sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&dpcmcpu>; - simple-audio-card,frame-master = <&dpcmcpu>; - - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "ak4642 Playback", "DAI1 Playback"; - - dpcmcpu: cpu@0 { - sound-dai = <&rcar_sound 0>; - }; - - cpu@1 { - sound-dai = <&rcar_sound 1>; - }; - - codec { - prefix = "ak4642"; - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; -}; - -------------------------------------------- -Example 6 - many DAI links with DPCM: -------------------------------------------- - -CPU0 ------ ak4613 -CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */ -CPU2 --/ /* DPCM 3ch/4ch */ -CPU3 --/ /* DPCM 5ch/6ch */ -CPU4 --/ /* DPCM 7ch/8ch */ -CPU5 ------ PCM3168A-c - -sound { - compatible = "simple-audio-card"; - - simple-audio-card,routing = - "pcm3168a Playback", "DAI1 Playback", - "pcm3168a Playback", "DAI2 Playback", - "pcm3168a Playback", "DAI3 Playback", - "pcm3168a Playback", "DAI4 Playback"; - - simple-audio-card,dai-link@0 { - format = "left_j"; - bitclock-master = <&sndcpu0>; - frame-master = <&sndcpu0>; - - sndcpu0: cpu { - sound-dai = <&rcar_sound 0>; - }; - codec { - sound-dai = <&ak4613>; - }; - }; - simple-audio-card,dai-link@1 { - format = "i2s"; - bitclock-master = <&sndcpu1>; - frame-master = <&sndcpu1>; - - convert-channels = <8>; /* TDM Split */ - - sndcpu1: cpu@0 { - sound-dai = <&rcar_sound 1>; - }; - cpu@1 { - sound-dai = <&rcar_sound 2>; - }; - cpu@2 { - sound-dai = <&rcar_sound 3>; - }; - cpu@3 { - sound-dai = <&rcar_sound 4>; - }; - codec { - mclk-fs = <512>; - prefix = "pcm3168a"; - dai-tdm-slot-num = <8>; - sound-dai = <&pcm3168a 0>; - }; - }; - simple-audio-card,dai-link@2 { - format = "i2s"; - bitclock-master = <&sndcpu2>; - frame-master = <&sndcpu2>; - - sndcpu2: cpu { - sound-dai = <&rcar_sound 5>; - }; - codec { - mclk-fs = <512>; - prefix = "pcm3168a"; - sound-dai = <&pcm3168a 1>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml new file mode 100644 index 000000000000..0a2a2c878c4a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -0,0 +1,484 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/simple-card.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Audio Card Driver Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> + +definitions: + + frame-master: + description: Indicates dai-link frame master. + $ref: /schemas/types.yaml#/definitions/phandle-array + + bitclock-master: + description: Indicates dai-link bit clock master + $ref: /schemas/types.yaml#/definitions/phandle-array + + frame-inversion: + description: dai-link uses frame clock inversion + $ref: /schemas/types.yaml#/definitions/flag + + bitclock-inversion: + description: dai-link uses bit clock inversion + $ref: /schemas/types.yaml#/definitions/flag + + dai-tdm-slot-num: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + dai-tdm-slot-width: + description: see tdm-slot.txt. + $ref: /schemas/types.yaml#/definitions/uint32 + + clocks: + description: | + If a clock is specified and a multiplication factor is given with + mclk-fs, the clock will be set to the calculated mclk frequency + when the stream starts. + $ref: /schemas/types.yaml#/definitions/phandle-array + + system-clock-frequency: + description: | + If a clock is specified and a multiplication factor is given with + mclk-fs, the clock will be set to the calculated mclk frequency + when the stream starts. + $ref: /schemas/types.yaml#/definitions/uint32 + + system-clock-direction-out: + description: | + specifies clock direction as 'out' on initialization. + It is useful for some aCPUs with fixed clocks. + $ref: /schemas/types.yaml#/definitions/flag + + mclk-fs: + description: | + Multiplication factor between stream rate and codec mclk. + When defined, mclk-fs property defined in dai-link sub nodes are ignored. + $ref: /schemas/types.yaml#/definitions/uint32 + + aux-devs: + description: | + List of phandles pointing to auxiliary devices, such + as amplifiers, to be added to the sound card. + $ref: /schemas/types.yaml#/definitions/phandle-array + + convert-rate: + description: CPU to Codec rate convert. + $ref: /schemas/types.yaml#/definitions/uint32 + + convert-channels: + description: CPU to Codec rate channels. + $ref: /schemas/types.yaml#/definitions/uint32 + + prefix: + description: "device name prefix" + $ref: /schemas/types.yaml#/definitions/string + + label: + description: "device name" + $ref: /schemas/types.yaml#/definitions/string + + routing: + description: | + A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's source. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + widgets: + description: User specified audio sound widgets. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + + pin-switches: + description: the widget names for which pin switches must be created. + $ref: /schemas/types.yaml#/definitions/string-array + + format: + description: audio format. + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + - ac97 + - pdm + - msb + - lsb + + dai: + type: object + properties: + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle-array + + # common properties + mclk-fs: + $ref: "#/definitions/mclk-fs" + prefix: + $ref: "#/definitions/prefix" + frame-inversion: + $ref: "#/definitions/frame-inversion" + bitclock-inversion: + $ref: "#/definitions/bitclock-inversion" + frame-master: + $ref: /schemas/types.yaml#/definitions/flag + bitclock-master: + $ref: /schemas/types.yaml#/definitions/flag + + dai-tdm-slot-num: + $ref: "#/definitions/dai-tdm-slot-num" + dai-tdm-slot-width: + $ref: "#/definitions/dai-tdm-slot-width" + clocks: + $ref: "#/definitions/clocks" + system-clock-frequency: + $ref: "#/definitions/system-clock-frequency" + system-clock-direction-out: + $ref: "#/definitions/system-clock-direction-out" + required: + - sound-dai + +properties: + compatible: + contains: + enum: + - simple-audio-card + - simple-scu-audio-card + + "#address-cells": true + "#size-cells": true + + label: + $ref: "#/definitions/label" + + simple-audio-card,name: + description: User specified audio sound card name. + $ref: /schemas/types.yaml#/definitions/string + +# use patternProperties to use "#definitions/xxx" +patternProperties: + "^simple-audio-card,widgets$": + $ref: "#/definitions/widgets" + "^simple-audio-card,routing$": + $ref: "#/definitions/routing" + "^simple-audio-card,cpu(@.*)?": + $ref: "#/definitions/dai" + "^simple-audio-card,codec(@.*)?": + $ref: "#/definitions/dai" + + # common properties + "^simple-audio-card,frame-master$": + $ref: "#/definitions/frame-master" + "^simple-audio-card,bitclock-master$": + $ref: "#/definitions/bitclock-master" + "^simple-audio-card,frame-inversion$": + $ref: "#/definitions/frame-inversion" + "^simple-audio-card,bitclock-inversion$": + $ref: "#/definitions/bitclock-inversion" + "^simple-audio-card,format$": + $ref: "#/definitions/format" + "^simple-audio-card,mclk-fs$": + $ref: "#/definitions/mclk-fs" + "^simple-audio-card,aux-devs$": + $ref: "#/definitions/aux-devs" + "^simple-audio-card,convert-rate$": + $ref: "#/definitions/convert-rate" + "^simple-audio-card,convert-channels$": + $ref: "#/definitions/convert-channels" + "^simple-audio-card,prefix$": + $ref: "#/definitions/prefix" + "^simple-audio-card,pin-switches$": + $ref: "#/definitions/pin-switches" +# use common *-gpio for +# simple-audio-card,hp-det-gpio: +# simple-audio-card,mic-det-gpio: + + "^simple-audio-card,dai-link(@.*)?": + description: | + Container for dai-link level properties and the CPU and CODEC sub-nodes. + This container may be omitted when the card has only one DAI link. + type: object + properties: + reg: + $ref: /schemas/types.yaml#/definitions/uint32 + + # common properties + frame-master: + $ref: "#/definitions/frame-master" + bitclock-master: + $ref: "#/definitions/bitclock-master" + frame-inversion: + $ref: "#/definitions/frame-inversion" + bitclock-inversion: + $ref: "#/definitions/bitclock-inversion" + format: + $ref: "#/definitions/format" + mclk-fs: + $ref: "#/definitions/mclk-fs" + aux-devs: + $ref: "#/definitions/aux-devs" + convert-rate: + $ref: "#/definitions/convert-rate" + convert-channels: + $ref: "#/definitions/convert-channels" + prefix: + $ref: "#/definitions/prefix" + pin-switches: + $ref: "#/definitions/pin-switches" + # use common *-gpio for + # hp-det-gpio: + # mic-det-gpio: + + patternProperties: + "^cpu(@.*)?": + $ref: "#/definitions/dai" + "^codec(@.*)?": + $ref: "#/definitions/dai" + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: +#-------------------- +# single DAI link +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "VF610-Tower-Sound-Card"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + + dailink0_master: simple-audio-card,codec { + sound-dai = <&ak4648>; + clocks = <&osc>; + }; + }; + +#-------------------- +# Multi DAI links +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Cubox Audio"; + + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { /* I2S - HDMI */ + reg = <0>; + format = "i2s"; + cpu { + sound-dai = <&audio0>; + }; + codec { + sound-dai = <&tda998x0>; + }; + }; + + simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */ + reg = <1>; + cpu { + sound-dai = <&audio1>; + }; + codec { + sound-dai = <&tda998x1>; + }; + }; + + simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */ + reg = <2>; + cpu { + sound-dai = <&audio2>; + }; + codec { + sound-dai = <&spdif_codec>; + }; + }; + }; + +#-------------------- +# route audio from IMX6 SSI2 through TLV320DAC3100 codec +# through TPA6130A2 amplifier to headphones: +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&amp>; + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clocks>; + }; + }; + +#-------------------- +# Sampling Rate Conversion +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + simple-audio-card,convert-rate = <48000>; + + simple-audio-card,prefix = "ak4642"; + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "DAI0 Capture", "ak4642 Capture"; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4643>; + system-clock-frequency = <11289600>; + }; + }; + +#-------------------- +# 2 CPU 1 Codec (Mixing) +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dpcmcpu>; + simple-audio-card,frame-master = <&dpcmcpu>; + + simple-audio-card,convert-rate = <48000>; + simple-audio-card,convert-channels = <2>; + + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", + "ak4642 Playback", "DAI1 Playback"; + + dpcmcpu: simple-audio-card,cpu@0 { + sound-dai = <&rcar_sound 0>; + }; + + simple-audio-card,cpu@1 { + sound-dai = <&rcar_sound 1>; + }; + + simple-audio-card,codec { + prefix = "ak4642"; + sound-dai = <&ak4643>; + clocks = <&audio_clock>; + }; + }; + +#-------------------- +# Multi DAI links with DPCM: +# +# CPU0 ------ ak4613 +# CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */ +# CPU2 --/ /* DPCM 3ch/4ch */ +# CPU3 --/ /* DPCM 5ch/6ch */ +# CPU4 --/ /* DPCM 7ch/8ch */ +# CPU5 ------ PCM3168A-c +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + + simple-audio-card,routing = + "pcm3168a Playback", "DAI1 Playback", + "pcm3168a Playback", "DAI2 Playback", + "pcm3168a Playback", "DAI3 Playback", + "pcm3168a Playback", "DAI4 Playback"; + + simple-audio-card,dai-link@0 { + format = "left_j"; + bitclock-master = <&sndcpu0>; + frame-master = <&sndcpu0>; + + sndcpu0: cpu { + sound-dai = <&rcar_sound 0>; + }; + codec { + sound-dai = <&ak4613>; + }; + }; + + simple-audio-card,dai-link@1 { + format = "i2s"; + bitclock-master = <&sndcpu1>; + frame-master = <&sndcpu1>; + + convert-channels = <8>; /* TDM Split */ + + sndcpu1: cpu@0 { + sound-dai = <&rcar_sound 1>; + }; + cpu@1 { + sound-dai = <&rcar_sound 2>; + }; + cpu@2 { + sound-dai = <&rcar_sound 3>; + }; + cpu@3 { + sound-dai = <&rcar_sound 4>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + dai-tdm-slot-num = <8>; + sound-dai = <&pcm3168a 0>; + }; + }; + + simple-audio-card,dai-link@2 { + format = "i2s"; + bitclock-master = <&sndcpu2>; + frame-master = <&sndcpu2>; + + sndcpu2: cpu { + sound-dai = <&rcar_sound 5>; + }; + codec { + mclk-fs = <512>; + prefix = "pcm3168a"; + sound-dai = <&pcm3168a 1>; + }; + }; + }; -- 2.17.1

3 5

[alsa-devel] [PATCH v2] ASoC: dt-bindings: renesas, rsnd: switch to yaml base Documentation
by Kuninori Morimoto 21 Feb '20

21 Feb '20

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> This patch switches from .txt base to .yaml base Document. It is still keeping detail explanations at .txt Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- v1 -> v2 - fixup dtc error .../bindings/sound/renesas,rsnd.txt | 518 ----------------- .../bindings/sound/renesas,rsnd.yaml | 529 ++++++++++++++++++ 2 files changed, 529 insertions(+), 518 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 797fd035434c..b731f16aea84 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -253,521 +253,3 @@ This is example of TDM 6ch. Driver can automatically switches TDM <-> stereo mode in this case. see "Example: simple sound card for TDM" - -============================================= -Required properties: -============================================= - -- compatible : "renesas,rcar_sound-<soctype>", fallbacks - "renesas,rcar_sound-gen1" if generation1, and - "renesas,rcar_sound-gen2" if generation2 (or RZ/G1) - "renesas,rcar_sound-gen3" if generation3 (or RZ/G2) - Examples with soctypes are: - - "renesas,rcar_sound-r8a7743" (RZ/G1M) - - "renesas,rcar_sound-r8a7744" (RZ/G1N) - - "renesas,rcar_sound-r8a7745" (RZ/G1E) - - "renesas,rcar_sound-r8a77470" (RZ/G1C) - - "renesas,rcar_sound-r8a774a1" (RZ/G2M) - - "renesas,rcar_sound-r8a774b1" (RZ/G2N) - - "renesas,rcar_sound-r8a774c0" (RZ/G2E) - - "renesas,rcar_sound-r8a7778" (R-Car M1A) - - "renesas,rcar_sound-r8a7779" (R-Car H1) - - "renesas,rcar_sound-r8a7790" (R-Car H2) - - "renesas,rcar_sound-r8a7791" (R-Car M2-W) - - "renesas,rcar_sound-r8a7793" (R-Car M2-N) - - "renesas,rcar_sound-r8a7794" (R-Car E2) - - "renesas,rcar_sound-r8a7795" (R-Car H3) - - "renesas,rcar_sound-r8a7796" (R-Car M3-W) - - "renesas,rcar_sound-r8a77965" (R-Car M3-N) - - "renesas,rcar_sound-r8a77990" (R-Car E3) - - "renesas,rcar_sound-r8a77995" (R-Car D3) -- reg : Should contain the register physical address. - required register is - SRU/ADG/SSI if generation1 - SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3 - Select extended AUDIO-DMAC-periperi address if SoC has it, - otherwise select normal AUDIO-DMAC-periperi address. -- reg-names : Should contain the register names. - scu/adg/ssi if generation1 - scu/adg/ssiu/ssi/audmapp if generation2/generation3 -- rcar_sound,ssi : Should contain SSI feature. - The number of SSI subnode should be same as HW. - see below for detail. -- rcar_sound,ssiu : Should contain SSIU feature. - The number of SSIU subnode should be same as HW. - see below for detail. -- rcar_sound,src : Should contain SRC feature. - The number of SRC subnode should be same as HW. - see below for detail. -- rcar_sound,ctu : Should contain CTU feature. - The number of CTU subnode should be same as HW. - see below for detail. -- rcar_sound,mix : Should contain MIX feature. - The number of MIX subnode should be same as HW. - see below for detail. -- rcar_sound,dvc : Should contain DVC feature. - The number of DVC subnode should be same as HW. - see below for detail. -- rcar_sound,dai : DAI contents. - The number of DAI subnode should be same as HW. - see below for detail. -- #sound-dai-cells : it must be 0 if your system is using single DAI - it must be 1 if your system is using multi DAI -- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. -- clock-names : List of necessary clock names. - "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X", - "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i" - -Optional properties: -- #clock-cells : it must be 0 if your system has audio_clkout - it must be 1 if your system has audio_clkout0/1/2/3 -- clock-frequency : for all audio_clkout0/1/2/3 -- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn - is asynchronizes with lr-clock. -- resets : References to SSI resets. -- reset-names : List of valid reset names. - "ssi-all", "ssi.X" - -SSI subnode properties: -- interrupts : Should contain SSI interrupt for PIO transfer -- shared-pin : if shared clock pin -- pio-transfer : use PIO transfer mode -- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case -- dma : Should contain Audio DMAC entry -- dma-names : SSI case "rx" (=playback), "tx" (=capture) - Deprecated: see SSIU subnode properties - SSIU case "rxu" (=playback), "txu" (=capture) - -SSIU subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "rx" (=playback), "tx" (=capture) - -SRC subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "rx" (=playback), "tx" (=capture) - -DVC subnode properties: -- dma : Should contain Audio DMAC entry -- dma-names : "tx" (=playback/capture) - -DAI subnode properties: -- playback : list of playback modules -- capture : list of capture modules - - -============================================= -Example: -============================================= - -rcar_sound: sound@ec500000 { - #sound-dai-cells = <1>; - compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - - clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, - <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, - <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, - <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, - <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, - <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, - <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, - <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, - <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, - <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, - <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, - <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; - clock-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", - "src.9", "src.8", "src.7", "src.6", "src.5", - "src.4", "src.3", "src.2", "src.1", "src.0", - "dvc.0", "dvc.1", - "clk_a", "clk_b", "clk_c", "clk_i"; - - rcar_sound,dvc { - dvc0: dvc-0 { - dmas = <&audma0 0xbc>; - dma-names = "tx"; - }; - dvc1: dvc-1 { - dmas = <&audma0 0xbe>; - dma-names = "tx"; - }; - }; - - rcar_sound,mix { - mix0: mix-0 { }; - mix1: mix-1 { }; - }; - - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - - rcar_sound,src { - src0: src-0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x85>, <&audma1 0x9a>; - dma-names = "rx", "tx"; - }; - src1: src-1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x87>, <&audma1 0x9c>; - dma-names = "rx", "tx"; - }; - src2: src-2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x89>, <&audma1 0x9e>; - dma-names = "rx", "tx"; - }; - src3: src-3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8b>, <&audma1 0xa0>; - dma-names = "rx", "tx"; - }; - src4: src-4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8d>, <&audma1 0xb0>; - dma-names = "rx", "tx"; - }; - src5: src-5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8f>, <&audma1 0xb2>; - dma-names = "rx", "tx"; - }; - src6: src-6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x91>, <&audma1 0xb4>; - dma-names = "rx", "tx"; - }; - src7: src-7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x93>, <&audma1 0xb6>; - dma-names = "rx", "tx"; - }; - src8: src-8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x95>, <&audma1 0xb8>; - dma-names = "rx", "tx"; - }; - src9: src-9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x97>, <&audma1 0xba>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,ssiu { - ssiu00: ssiu-0 { - dmas = <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx"; - }; - ssiu01: ssiu-1 { - dmas = <&audma0 0x35>, <&audma1 0x36>; - dma-names = "rx", "tx"; - }; - - ... - - ssiu95: ssiu-49 { - dmas = <&audma0 0xA5>, <&audma1 0xA6>; - dma-names = "rx", "tx"; - }; - ssiu96: ssiu-50 { - dmas = <&audma0 0xA7>, <&audma1 0xA8>; - dma-names = "rx", "tx"; - }; - ssiu97: ssiu-51 { - dmas = <&audma0 0xA9>, <&audma1 0xAA>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>; - dma-names = "rx", "tx"; - }; - ssi1: ssi-1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>; - dma-names = "rx", "tx"; - }; - - ... - - ssi8: ssi-8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>; - dma-names = "rx", "tx"; - }; - ssi9: ssi-9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>; - dma-names = "rx", "tx"; - }; - }; - - rcar_sound,dai { - dai0 { - playback = <&ssi5 &src5>; - capture = <&ssi6>; - }; - dai1 { - playback = <&ssi3>; - }; - dai2 { - capture = <&ssi4>; - }; - dai3 { - playback = <&ssi7>; - }; - dai4 { - capture = <&ssi8>; - }; - }; -}; - -============================================= -Example: simple sound card -============================================= - - rsnd_ak4643: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; - }; - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; - }; - }; -}; - -&ssi1 { - shared-pin; -}; - -============================================= -Example: simple sound card for Asynchronous mode -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - /* - * SRC Asynchronous mode setting - * Playback: - * All input data will be converted to 48kHz - * Capture: - * Inputed 48kHz data will be converted to - * system specified Hz - */ - simple-audio-card,convert-rate = <48000>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; -}; - -============================================= -Example: simple sound card for channel convert -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - /* - * CTU setting - * All input data will be converted to 2ch - * as output data - */ - simple-audio-card,convert-channels = <2>; - ... - simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - simple-audio-card,codec { - ... - }; -}; - -============================================= -Example: simple sound card for MIXer -============================================= - -sound { - compatible = "simple-scu-audio-card"; - ... - simple-audio-card,cpu@0 { - sound-dai = <&rcar_sound 0>; - }; - simple-audio-card,cpu@1 { - sound-dai = <&rcar_sound 1>; - }; - simple-audio-card,codec { - ... - }; -}; - -&rcar_sound { - ... - rcar_sound,dai { - dai0 { - playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; - }; - dai1 { - playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; - }; - }; -}; - -============================================= -Example: simple sound card for TDM -============================================= - -rsnd_tdm: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - dai-tdm-slot-num = <6>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&xxx>; - }; -}; - -============================================= -Example: simple sound card for TDM Split -============================================= - -sound_card: sound { - compatible = "audio-graph-scu-card"; - prefix = "xxxx"; - routing = "xxxx Playback", "DAI0 Playback", - "xxxx Playback", "DAI1 Playback", - "xxxx Playback", "DAI2 Playback", - "xxxx Playback", "DAI3 Playback"; - convert-channels = <8>; /* TDM Split */ - - dais = <&rsnd_port0 /* playback ch1/ch2 */ - &rsnd_port1 /* playback ch3/ch4 */ - &rsnd_port2 /* playback ch5/ch6 */ - &rsnd_port3 /* playback ch7/ch8 */ - >; -}; - -audio-codec { - ... - port { - codec_0: endpoint@1 { - remote-endpoint = <&rsnd_ep0>; - }; - codec_1: endpoint@2 { - remote-endpoint = <&rsnd_ep1>; - }; - codec_2: endpoint@3 { - remote-endpoint = <&rsnd_ep2>; - }; - codec_3: endpoint@4 { - remote-endpoint = <&rsnd_ep3>; - }; - }; -}; - -&rcar_sound { - ... - ports { - rsnd_port0: port@0 { - rsnd_ep0: endpoint { - remote-endpoint = <&codec_0>; - ... - playback = <&ssiu30 &ssi3>; - }; - }; - rsnd_port1: port@1 { - rsnd_ep1: endpoint { - remote-endpoint = <&codec_1>; - ... - playback = <&ssiu31 &ssi3>; - }; - }; - rsnd_port2: port@2 { - rsnd_ep2: endpoint { - remote-endpoint = <&codec_2>; - ... - playback = <&ssiu32 &ssi3>; - }; - }; - rsnd_port3: port@3 { - rsnd_ep3: endpoint { - remote-endpoint = <&codec_3>; - ... - playback = <&ssiu33 &ssi3>; - }; - }; - }; -}; - -============================================= -Example: simple sound card for Multi channel -============================================= - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml new file mode 100644 index 000000000000..0958255c8542 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -0,0 +1,529 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Sound Driver Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> + +properties: + $nodename: + pattern: "^sound@.*" + + compatible: + oneOf: + # for Gen1 SoC + - items: + - enum: + - renesas,rcar_sound-r8a7778 # R-Car M1A + - renesas,rcar_sound-r8a7779 # R-Car H1 + - enum: + - renesas,rcar_sound-gen1 + # for Gen2 SoC + - items: + - enum: + - renesas,rcar_sound-r8a7743 # RZ/G1M + - renesas,rcar_sound-r8a7744 # RZ/G1N + - renesas,rcar_sound-r8a7745 # RZ/G1E + - renesas,rcar_sound-r8a77470 # RZ/G1C + - renesas,rcar_sound-r8a7790 # R-Car H2 + - renesas,rcar_sound-r8a7791 # R-Car M2-W + - renesas,rcar_sound-r8a7793 # R-Car M2-N + - renesas,rcar_sound-r8a7794 # R-Car E2 + - enum: + - renesas,rcar_sound-gen2 + # for Gen3 SoC + - items: + - enum: + - renesas,rcar_sound-r8a774a1 # RZ/G2M + - renesas,rcar_sound-r8a774b1 # RZ/G2N + - renesas,rcar_sound-r8a774c0 # RZ/G2E + - renesas,rcar_sound-r8a7795 # R-Car H3 + - renesas,rcar_sound-r8a7796 # R-Car M3-W + - renesas,rcar_sound-r8a77965 # R-Car M3-N + - renesas,rcar_sound-r8a77990 # R-Car E3 + - renesas,rcar_sound-r8a77995 # R-Car D3 + - enum: + - renesas,rcar_sound-gen3 + # for Generic + - items: + - enum: + - renesas,rcar_sound-gen1 + - renesas,rcar_sound-gen2 + - renesas,rcar_sound-gen3 + + reg: + minItems: 3 # Gen1 + maxItems: 5 # Gen2/Gen3 + + reg-names: + description: | + Should contain the register names. + scu/adg/ssi if generation1 + scu/adg/ssiu/ssi/audmapp if generation2/generation3 + minItems: 3 # Gen1 + maxItems: 5 # Gen2/Gen3 + allOf: + - items: + enum: + - scu + - adg + - ssiu + - ssi + - audmapp + + "#sound-dai-cells": + description: | + it must be 0 if your system is using single DAI + it must be 1 if your system is using multi DAIs + enum: [0, 1] + + "#clock-cells": + description: | + it must be 0 if your system has audio_clkout + it must be 1 if your system has audio_clkout0/1/2/3 + enum: [0, 1] + + clock-frequency: + description: for audio_clkout0/1/2/3 + $ref: /schemas/types.yaml#/definitions/uint32-array + + clkout-lr-asynchronous: + description: audio_clkoutn is asynchronizes with lr-clock. + $ref: /schemas/types.yaml#/definitions/flag + + power-domains: true + + resets: + description: References to SSI resets + $ref: /schemas/types.yaml#/definitions/phandle-array + + reset-names: + description: List of valid reset names. + allOf: + - items: + enum: + - ssi-all + - ssi.9 + - ssi.8 + - ssi.7 + - ssi.6 + - ssi.5 + - ssi.4 + - ssi.3 + - ssi.2 + - ssi.1 + - ssi.0 + + clocks: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. + + clock-names: + description: List of necessary clock names. + allOf: + - items: + enum: + - ssi-all + - ssi.9 + - ssi.8 + - ssi.7 + - ssi.6 + - ssi.5 + - ssi.4 + - ssi.3 + - ssi.2 + - ssi.1 + - ssi.0 + - src.9 + - src.8 + - src.7 + - src.6 + - src.5 + - src.4 + - src.3 + - src.2 + - src.1 + - src.0 + - mix.1 + - mix.0 + - ctu.1 + - ctu.0 + - dvc.1 + - dvc.0 + - clk_a + - clk_b + - clk_c + - clk_i + + # For OF-graph + port: + description: OF-Graph subnode + type: object + properties: + reg: + $ref: /schemas/types.yaml#/definitions/uint32 + endpoint: + type: object + properties: + remote-endpoint: + $ref: /schemas/types.yaml#/definitions/phandle-array + dai-format: + $ref: "simple-card.yaml#/definitions/format" + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + required: + - remote-endpoint + + # For multi OF-graph + ports: + description: multi OF-Graph subnode + type: object + patternProperties: + "port(@.*)?": + $ref: "#properties/port" + +patternProperties: + "^rcar_sound,dvc$": + description: DVC subnode. + type: object + patternProperties: + "dvc-.": + type: object + properties: + dmas: + $ref: /schemas/types.yaml#/definitions/phandle-array + dma-names: + const: "tx" + required: + - dmas + - dma-names + additionalProperties: false + + "^rcar_sound,mix$": + description: MIX subnode. + type: object + patternProperties: + "mix-.": + type: object + additionalProperties: false + + "^rcar_sound,ctu$": + description: CTU subnode. + type: object + patternProperties: + "ctu-.": + type: object + additionalProperties: false + + "^rcar_sound,src$": + description: SRC subnode. + type: object + patternProperties: + "src-.": + type: object + properties: + interrupts: + maxItems: 1 + dmas: + $ref: /schemas/types.yaml#/definitions/phandle-array + dma-names: + allOf: + - items: + enum: + - tx + - rx + allOf: + - if: + properties: + status: + const: "ok" + then: + required: + - interrupts + - dmas + - dma-names + additionalProperties: false + + "^rcar_sound,ssiu$": + description: SSIU subnode. + type: object + patternProperties: + "ssiu-.*": + type: object + properties: + dmas: + $ref: /schemas/types.yaml#/definitions/phandle-array + dma-names: + allOf: + - items: + enum: + - tx + - rx + required: + - dmas + - dma-names + additionalProperties: false + + "^rcar_sound,ssi$": + description: SSI subnode. + type: object + patternProperties: + "ssi-.": + type: object + properties: + interrupts: + maxItems: 1 + dmas: + $ref: /schemas/types.yaml#/definitions/phandle-array + dma-names: + allOf: + - items: + enum: + - tx + - rx + - txu # if no ssiu node + - rxu # if no ssiu node + + shared-pin: + description: shared clock pin + $ref: /schemas/types.yaml#/definitions/flag + pio-transfer: + description: PIO transfer mode + $ref: /schemas/types.yaml#/definitions/flag + no-busif: + description: BUSIF is not used when [mem -> SSI] via DMA case + $ref: /schemas/types.yaml#/definitions/flag + required: + - interrupts + - dmas + - dma-names + additionalProperties: false + + # For DAI base + "^rcar_sound,dai$": + description: DAI subnode. + type: object + patternProperties: + "dai.*": + type: object + properties: + playback: + $ref: /schemas/types.yaml#/definitions/phandle-array + capture: + $ref: /schemas/types.yaml#/definitions/phandle-array + anyOf: + - required: + - playback + - required: + - capture + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - "#sound-dai-cells" + +additionalProperties: false + +examples: + - | + rcar_sound: sound@ec500000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&mstp10_clks 1005>, /* SSI-ALL */ + <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */ + <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */ + <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */ + <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */ + <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */ + <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */ + <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */ + <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */ + <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */ + <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */ + <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* DVC0, DVC1 */ + <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CLKA, CLKB */ + <&mstp10_clks 1019>, <&mstp10_clks 1018>; /* CLKC, CLKI */ + + clock-names = "ssi-all", + "ssi.9", "ssi.8", + "ssi.7", "ssi.6", + "ssi.5", "ssi.4", + "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", + "src.7", "src.6", + "src.5", "src.4", + "src.3", "src.2", + "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", + "clk_c", "clk_i"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + status = "disabled"; + }; + src1: src-1 { + interrupts = <0 353 0>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + /* skip after src-2 */ + }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + /* skip after ssiu-2 */ + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <0 370 1>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <0 371 1>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + /* skip other ssi-2 */ + }; + + /* DAI base */ + rcar_sound,dai { + dai0 { + playback = <&ssi5 &src5>; + capture = <&ssi6>; + }; + dai1 { + playback = <&ssi3>; + }; + dai2 { + capture = <&ssi4>; + }; + dai3 { + playback = <&ssi7>; + }; + dai4 { + capture = <&ssi8>; + }; + }; + + /* OF-Graph */ + port { + rsnd_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; + + /* Multi OF-Graph */ + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + reg = <0>; + rsnd_endpoint0: endpoint { + remote-endpoint = <&codec_endpoint1>; + + dai-format = "left_j"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&codec_endpoint2>; + + dai-format = "i2s"; + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; + }; + }; + + + /* For OF-Graph */ + codec { + ports { + port@0 { + codec_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + port@1 { + codec_endpoint1: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + port@2 { + codec_endpoint2: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; + }; + }; -- 2.17.1

3 5

[PATCH 0/2] SOF: Intel: hda: allow operation without i915 gfx
by Kai Vehmanen 20 Feb '20

20 Feb '20

Hi, here's a pair of patches that fixes SOF HDA driver load on devices that have: - digital mics connected to Intel HDA (so that SOF needs to be used instead of the legacy HDA driver), and - external GPU (internal i915 graphics not enabled) Kai Vehmanen (2): ASoC: intel/skl/hda - add no-HDMI cases to generic HDA driver ASoC: SOF: Intel: hda: allow operation without i915 gfx sound/soc/intel/boards/skl_hda_dsp_common.h | 4 ++++ sound/soc/intel/boards/skl_hda_dsp_generic.c | 25 ++++++++++++++++---- sound/soc/sof/intel/hda-codec.c | 11 ++++++++- sound/soc/sof/intel/hda.c | 22 +++++++---------- 4 files changed, 42 insertions(+), 20 deletions(-) -- 2.17.1

2 4

[PATCH] ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
by Matthias Reichl 20 Feb '20

20 Feb '20

When we get a clock error during probe we have to call regulator_bulk_disable before bailing out, otherwise we trigger a warning in regulator_put. Fix this by using "goto err" like in the error cases above. Fixes: 5a3af1293194d ("ASoC: pcm512x: Add PCM512x driver") Signed-off-by: Matthias Reichl <hias(a)horus.com> --- sound/soc/codecs/pcm512x.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 861210f6bf4fd..4cbef9affffda 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -1564,13 +1564,15 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap) } pcm512x->sclk = devm_clk_get(dev, NULL); - if (PTR_ERR(pcm512x->sclk) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(pcm512x->sclk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err; + } if (!IS_ERR(pcm512x->sclk)) { ret = clk_prepare_enable(pcm512x->sclk); if (ret != 0) { dev_err(dev, "Failed to enable SCLK: %d\n", ret); - return ret; + goto err; } } -- 2.20.1

3 2

Applied "dt-bindings: sound: Add TLV320ADCx140 dt bindings" to the asoc tree
by Mark Brown 20 Feb '20

20 Feb '20

The patch dt-bindings: sound: Add TLV320ADCx140 dt bindings has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 4ee67cbd97668ab1b17d86d85348302c0b7490cd Mon Sep 17 00:00:00 2001 From: Dan Murphy <dmurphy(a)ti.com> Date: Thu, 20 Feb 2020 15:07:58 -0600 Subject: [PATCH] dt-bindings: sound: Add TLV320ADCx140 dt bindings Add dt bindings for the TLV320ADCx140 Burr-Brown ADC. The initial support is for the following: TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140 TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140 TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140 Signed-off-by: Dan Murphy <dmurphy(a)ti.com> Link: https://lore.kernel.org/r/20200220210759.31466-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie(a)kernel.org> --- .../bindings/sound/tlv320adcx140.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml new file mode 100644 index 000000000000..1433ff62b14f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter + +maintainers: + - Dan Murphy <dmurphy(a)ti.com> + +description: | + The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital + PDM microphones recording), high-performance audio, analog-to-digital + converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140 + family supports line and microphone Inputs, and offers a programmable + microphone bias or supply voltage generation. + + Specifications can be found at: + http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf + http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf + +properties: + compatible: + oneOf: + - const: ti,tlv320adc3140 + - const: ti,tlv320adc5140 + - const: ti,tlv320adc6140 + + reg: + maxItems: 1 + description: | + I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + reset-gpios: + description: | + GPIO used for hardware reset. + + areg-supply: + description: | + Regulator with AVDD at 3.3V. If not defined then the internal regulator + is enabled. + + ti,mic-bias-source: + description: | + Indicates the source for MIC Bias. + 0 - Mic bias is set to VREF + 1 - Mic bias is set to VREF × 1.096 + 6 - Mic bias is set to AVDD + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 6] + + ti,vref-source: + description: | + Indicates the source for MIC Bias. + 0 - Set VREF to 2.75V + 1 - Set VREF to 2.5V + 2 - Set VREF to 1.375V + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 2] + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tlv320adc5140"; + reg = <0x4c>; + ti,use-internal-areg; + ti,mic-bias-source = <6>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; -- 2.20.1

1 0

[PATCH for-next v3 0/2] Introduce the TLV320ADCx140 codec family
by Dan Murphy 20 Feb '20

20 Feb '20

Hello Introducing the Texas Instruments TLV320ADCx140 quad channel audio ADC. This device supports 4 analog inputs, 8 digital inputs or a combination of analog and digital microphones. TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140 TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140 TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140 Dan Murphy (2): dt-bindings: sound: Add TLV320ADCx140 dt bindings ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family .../bindings/sound/tlv320adcx140.yaml | 83 ++ sound/soc/codecs/Kconfig | 9 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320adcx140.c | 849 ++++++++++++++++++ sound/soc/codecs/tlv320adcx140.h | 130 +++ 5 files changed, 1073 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml create mode 100644 sound/soc/codecs/tlv320adcx140.c create mode 100644 sound/soc/codecs/tlv320adcx140.h -- 2.25.0

2 3