December 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH 0/2] Publish snd_pcm_audio_tstamp_type_t constants
by David Henningsson 22 Dec '20

22 Dec '20

Hi, Sorry if this message reaches you twice. Apparently I tried to send this earlier from an address which I no longer has access to. :-( So if you sent a reply I could never read it. Hopefully it'll work better this time around. Anyhow, testing of these patches are limited to running "gitcompile", which does not seem to compile the tests, is there an easy command to compile them as well? David Henningsson (2): pcm: Add snd_pcm_audio_tstamp_type_t constants test/audio_time: Make use of SND_PCM_AUDIO_TSTAMP_TYPE constants include/pcm.h | 14 ++++++++++++++ test/audio_time.c | 26 +++++++++++++------------- 2 files changed, 27 insertions(+), 13 deletions(-) -- 2.25.1

2 3

[PATCH] ALSA: usb-audio: Add implicit feeback support for the BOSS GT-1
by Mike Oliphant 22 Dec '20

22 Dec '20

The BOSS GT-1 (USB ID 0582:01d6) requires implicit feedback like other similar BOSS devices. This patch adds this support. Signed-off-by: Mike Oliphant <oliphant(a)nostatic.org> --- sound/usb/implicit.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/implicit.c b/sound/usb/implicit.c index 4e911d200..d44997e49 100644 --- a/sound/usb/implicit.c +++ b/sound/usb/implicit.c @@ -77,6 +77,7 @@ static const struct snd_usb_implicit_fb_match playback_implicit_fb_quirks[] = { IMPLICIT_FB_SKIP_DEV(0x0582, 0x0189), /* BOSS GT-100v2 */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x01d8), /* BOSS Katana */ IMPLICIT_FB_SKIP_DEV(0x0582, 0x01e5), /* BOSS GT-001 */ + IMPLICIT_FB_SKIP_DEV(0x0582, 0x01d6), /* BOSS GT-1 */ {} /* terminator */ }; @@ -87,6 +88,7 @@ static const struct snd_usb_implicit_fb_match capture_implicit_fb_quirks[] = { IMPLICIT_FB_FIXED_DEV(0x0582, 0x0189, 0x0d, 0x01), /* BOSS GT-100v2 */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x01d8, 0x0d, 0x01), /* BOSS Katana */ IMPLICIT_FB_FIXED_DEV(0x0582, 0x01e5, 0x0d, 0x01), /* BOSS GT-001 */ + IMPLICIT_FB_FIXED_DEV(0x0582, 0x01d6, 0x0d, 0x01), /* BOSS GT-1 */ {} /* terminator */ }; -- 2.29.2

3 2

[PATCH v3 0/6] Add support for Rpi4b + Cirrus Lochnagar2 and CS47L15
by Richard Fitzgerald 21 Dec '20

21 Dec '20

This set of patches provides support for using the Raspberry Pi 4b with a Cirrus Logic Lochnagar 2 audio development platform plus Cirrus Logic CS47L15 codec. Patches are needed to audio-graph-card to enable support for setting the component sysclks and plls. These are not specific to CS47L15 - several Cirrus and non-Cirrus codecs also require component clock setup, typically for larger codecs with multiple internal clocking options and clock domains. The codec sysclks and plls cannot be placed under the clock framework because they are typically I2C/SPI/Soundwire-connected peripherals and access to the registers would cause a nested get of the bus clock. The clock framework does not support this and it would result in a deadlock. Richard Fitzgerald (6): of: base: Add of_count_phandle_with_fixed_args() ASoC: audio-graph-card: Add plls and sysclks DT bindings ASoC: audio-graph-card: Support setting component plls and sysclks ASoC: madera: Allow codecs to be selected from kernel config ASoC: madera: Export clock config defines to dt-bindings ARM: dts: Add dts for RPi4b + Cirrus Logic Lochnagar2 + CS47L15 .../bindings/sound/audio-graph-card.txt | 72 ++++++ MAINTAINERS | 1 + arch/arm/boot/dts/Makefile | 1 + ...bcm2711-rpi4b-cirrus-lochnagar-cs47l15.dts | 186 ++++++++++++++ .../dts/bcm2711-rpi4b-cirrus-lochnagar.dtsi | 201 +++++++++++++++ drivers/of/base.c | 73 ++++-- include/dt-bindings/sound/madera.h | 60 +++++ include/linux/of.h | 9 + include/sound/simple_card_utils.h | 25 ++ sound/soc/codecs/Kconfig | 10 +- sound/soc/codecs/madera.h | 56 +---- sound/soc/generic/audio-graph-card.c | 16 +- sound/soc/generic/simple-card-utils.c | 236 ++++++++++++++++++ 13 files changed, 861 insertions(+), 85 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2711-rpi4b-cirrus-lochnagar-cs47l15.dts create mode 100644 arch/arm/boot/dts/bcm2711-rpi4b-cirrus-lochnagar.dtsi -- 2.20.1

4 10

[PATCH] ALSA: usb-audio: Add alias entry for ASUS PRIME TRX40 PRO-S
by Takashi Iwai 21 Dec '20

21 Dec '20

ASUS PRIME TRX40 PRO-S mobo with 0b05:1918 needs the same quirk alias for another ASUS mobo (0b05:1917) for the proper mixer mapping, etc. Add the corresponding entry. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210783 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/card.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/usb/card.c b/sound/usb/card.c index cb0b6582dfee..d731ca62d599 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -383,6 +383,9 @@ static const struct usb_audio_device_name usb_audio_names[] = { /* ASUS ROG Strix */ PROFILE_NAME(0x0b05, 0x1917, "Realtek", "ALC1220-VB-DT", "Realtek-ALC1220-VB-Desktop"), + /* ASUS PRIME TRX40 PRO-S */ + PROFILE_NAME(0x0b05, 0x1918, + "Realtek", "ALC1220-VB-DT", "Realtek-ALC1220-VB-Desktop"), /* Dell WD15 Dock */ PROFILE_NAME(0x0bda, 0x4014, "Dell", "WD15 Dock", "Dell-WD15-Dock"), -- 2.26.2

1 0

[PATCH 2/2] sound: Remove redundant comments
by hui yang 21 Dec '20

21 Dec '20

From: YangHui <yanghui.def(a)gmail.com> Remove redundant comments Signed-off-by: YangHui <yanghui.def(a)gmail.com> --- sound/core/init.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/core/init.c b/sound/core/init.c index 764dbe6..75aec71 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -149,8 +149,6 @@ static void release_card_device(struct device *dev) * @extra_size: allocate this extra size after the main soundcard structure * @card_ret: the pointer to store the created card instance * - * Creates and initializes a soundcard structure. - * * The function allocates snd_card instance via kzalloc with the given * space for the driver to use freely. The allocated struct is stored * in the given card_ret pointer. -- 2.7.4

2 1

[PATCH] ALSA: hda/realtek: Add quirk for MSI-GP73
by Takashi Iwai 20 Dec '20

20 Dec '20

MSI-GP73 (with SSID 1462:1229) requires yet again ALC1220_FIXUP_CLEVO_P950 quirk like other MSI models. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210793 Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c203eba8d9ff..5478a89d94e3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2516,6 +2516,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950), + SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1275, "MSI-GL63", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950), SND_PCI_QUIRK(0x1462, 0x1293, "MSI-GP65", ALC1220_FIXUP_CLEVO_P950), -- 2.26.2

1 0

[RFC][PATCH v2 0/1] design a way to change audio Jack state by software
by Hui Wang 19 Dec '20

19 Dec '20

the changes in the V2: - using debugfs instead of sysfs - using jack_ctrl to create a folder instead of snd_jack, since ASoC drivers could create multi jack_ctrls within a snd_jack - create a folder for each jack_ctrl instead for all jack_ctrls This is the layout of folder on a machine with 2 sound cards: root@hwang4-ThinkPad-P1-Gen-3:/sys/kernel/debug# tree /sys/kernel/debug/sound-core/ /sys/kernel/debug/sound-core/ ├── card0 │ ├── HDMI!DP,pcm=10 Jack │ │ ├── jackin_inject │ │ └── sw_inject_enable │ ├── HDMI!DP,pcm=11 Jack │ │ ├── jackin_inject │ │ └── sw_inject_enable │ ├── HDMI!DP,pcm=3 Jack │ │ ├── jackin_inject │ │ └── sw_inject_enable │ ├── HDMI!DP,pcm=7 Jack │ │ ├── jackin_inject │ │ └── sw_inject_enable │ ├── HDMI!DP,pcm=8 Jack │ │ ├── jackin_inject │ │ └── sw_inject_enable │ └── HDMI!DP,pcm=9 Jack │ ├── jackin_inject │ └── sw_inject_enable └── card1 ├── HDMI!DP,pcm=3 Jack │ ├── jackin_inject │ └── sw_inject_enable ├── HDMI!DP,pcm=4 Jack │ ├── jackin_inject │ └── sw_inject_enable ├── HDMI!DP,pcm=5 Jack │ ├── jackin_inject │ └── sw_inject_enable ├── Headphone Jack │ ├── jackin_inject │ └── sw_inject_enable ├── Headset Jack │ ├── jackin_inject │ └── sw_inject_enable └── Mic Jack ├── jackin_inject └── sw_inject_enable The sw_inject_enable has rw mode, the jackin_inject has write_only mode. If users want to inject a plugin to Headphone Jack, they could run: echo 1 > 'Headphone Jack'/sw_inject_enable /* now, this jack state can't be changed by hw events */ cat 'Headphone Jack'/sw_inject_enable ack: Headphone Jack Inject Enabled: 1 echo 1 > 'Headphone Jack'/jackin_inject /* this will inject a plugin to Headphone Jack */ After testing, run echo 0 > 'Headphone Jack'/sw_inject_enable /* the hw events will change the jack state */ Hui Wang (1): alsa: jack: implement software jack injection via debugfs include/sound/core.h | 2 + sound/core/init.c | 7 ++ sound/core/jack.c | 202 ++++++++++++++++++++++++++++++++++++------- sound/core/sound.c | 8 ++ 4 files changed, 188 insertions(+), 31 deletions(-) -- 2.25.1

3 5

[PATCH] Fix mic sound on Jieli webcam
by Marco Giunta 19 Dec '20

19 Dec '20

Hi, recently I've bought a usb webcam with integrated mic: Jieli Technology USB PHY 2.0 (1224:2a25) The video part works well, but the mic sound is speedups, "like minions" (cit.). When I connect the camera, these are the dmesg messages: kernel: usb 1-8: current rate 0 is different from the runtime rate 8000 kernel: usb 1-8: current rate 0 is different from the runtime rate 16000 kernel: usb 1-8: current rate 0 is different from the runtime rate 44100 kernel: usb 1-8: current rate 0 is different from the runtime rate 48000 kernel: usb 1-8: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. kernel: usb 1-8: [3] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 kernel: usbcore: registered new interface driver snd-usb-audio and after a while, dmesg log is filled, every 5 seconds, with: kernel: retire_capture_urb: 84 callbacks suppressed kernel: retire_capture_urb: 1714 callbacks suppressed A guy reports on ArchLinux bug website the same problem (https://bugs.archlinux.org/task/68141?opened=12995&status%5B0%5D=) and provides a patch to fix the sound issue. I've applied the patch on kernel 5.9.13 (Fedora 33 x86_64) and now the mic works, no more minions voice effect. Now dmesg messages are only: kernel: usb 1-8: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. kernel: usb 1-8: [3] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 kernel: usbcore: registered new interface driver snd-usb-audio the retire_capture_urb messages are gone. All credits for the patch go to him but I don't know how to contact that guy nor I don't know if he has already contacted you, so my question is if you could review his patch and finally apply upstream. If you need other information or you need a tester, I'm here. Thanks, Marco --- a/sound/usb/format.c 2020-10-01 18:36:35.000000000 +0300 +++ b/sound/usb/format.c 2020-10-04 02:10:21.678685952 +0300 @@ -217,6 +217,21 @@ (chip->usb_id == USB_ID(0x041e, 0x4064) || chip->usb_id == USB_ID(0x041e, 0x4068))) rate = 8000; + + // hack for "Jieli Technology USB PHY 2.0" webcam + if (chip->usb_id == USB_ID(0x1224, 0x2a25)) { + switch (rate) { + case 8000: + fp->datainterval += 4; + break; + case 16000: + fp->datainterval += 3; + break; + default: + fp->datainterval += 1; + break; + } + } fp->rate_table[fp->nr_rates] = rate; if (!fp->rate_min || rate < fp->rate_min) --- a/sound/usb/endpoint.c 2020-10-01 18:36:35.000000000 +0300 +++ b/sound/usb/endpoint.c 2020-10-04 02:09:09.471978982 +0300 @@ -882,6 +882,8 @@ if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) { packs_per_ms = 8 >> ep->datainterval; max_packs_per_urb = MAX_PACKS_HS; + if (!packs_per_ms) + packs_per_ms = 1; } else { packs_per_ms = 1; max_packs_per_urb = MAX_PACKS; --- a/sound/usb/quirks.c 2020-10-01 18:36:35.000000000 +0300 +++ b/sound/usb/quirks.c 2020-10-04 02:14:04.532196519 +0300 @@ -1516,6 +1516,7 @@ case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */ case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */ case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */ + case USB_ID(0x1224, 0x2a25): /* Jieli Technology USB PHY 2.0 */ return true; }

2 8

[PATCH] ALSA: pcm: oss: Fix a few more UBSAN fixes
by Takashi Iwai 18 Dec '20

18 Dec '20

There are a few places that call round{up|down}_pow_of_two() with the value zero, and this causes undefined behavior warnings. Avoid calling those macros if such a nonsense value is passed; it's a minor optimization as well, as we handle it as either an error or a value to be skipped, instead. Reported-by: syzbot+33ef0b6639a8d2d42b4c(a)syzkaller.appspotmail.com Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/oss/pcm_oss.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c index de1917484647..142fc751a847 100644 --- a/sound/core/oss/pcm_oss.c +++ b/sound/core/oss/pcm_oss.c @@ -693,6 +693,8 @@ static int snd_pcm_oss_period_size(struct snd_pcm_substream *substream, oss_buffer_size = snd_pcm_plug_client_size(substream, snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, NULL)) * oss_frame_size; + if (!oss_buffer_size) + return -EINVAL; oss_buffer_size = rounddown_pow_of_two(oss_buffer_size); if (atomic_read(&substream->mmap_count)) { if (oss_buffer_size > runtime->oss.mmap_bytes) @@ -728,17 +730,21 @@ static int snd_pcm_oss_period_size(struct snd_pcm_substream *substream, min_period_size = snd_pcm_plug_client_size(substream, snd_pcm_hw_param_value_min(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL)); - min_period_size *= oss_frame_size; - min_period_size = roundup_pow_of_two(min_period_size); - if (oss_period_size < min_period_size) - oss_period_size = min_period_size; + if (min_period_size) { + min_period_size *= oss_frame_size; + min_period_size = roundup_pow_of_two(min_period_size); + if (oss_period_size < min_period_size) + oss_period_size = min_period_size; + } max_period_size = snd_pcm_plug_client_size(substream, snd_pcm_hw_param_value_max(slave_params, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, NULL)); - max_period_size *= oss_frame_size; - max_period_size = rounddown_pow_of_two(max_period_size); - if (oss_period_size > max_period_size) - oss_period_size = max_period_size; + if (max_period_size) { + max_period_size *= oss_frame_size; + max_period_size = rounddown_pow_of_two(max_period_size); + if (oss_period_size > max_period_size) + oss_period_size = max_period_size; + } oss_periods = oss_buffer_size / oss_period_size; -- 2.26.2

1 0

[PATCH] ALSA: pcm: Remove snd_pcm_lib_preallocate_dma_free()
by Lars-Peter Clausen 18 Dec '20

18 Dec '20

Since commit d4cfb30fce03 ("ALSA: pcm: Set per-card upper limit of PCM buffer allocations") snd_pcm_lib_preallocate_dma_free() is a single line function that has one caller, which is another single line function. Clean this up a bit and remove snd_pcm_lib_preallocate_dma_free() and directly call do_free_pages() from snd_pcm_lib_preallocate_free(). This is a bit less boilerplate. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/core/pcm_memory.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c index 4f03ba8ed0ae..ee6e9c5eec45 100644 --- a/sound/core/pcm_memory.c +++ b/sound/core/pcm_memory.c @@ -89,14 +89,6 @@ static int preallocate_pcm_pages(struct snd_pcm_substream *substream, size_t siz return 0; } -/* - * release the preallocated buffer if not yet done. - */ -static void snd_pcm_lib_preallocate_dma_free(struct snd_pcm_substream *substream) -{ - do_free_pages(substream->pcm->card, &substream->dma_buffer); -} - /** * snd_pcm_lib_preallocate_free - release the preallocated buffer of the specified substream. * @substream: the pcm substream instance @@ -105,7 +97,7 @@ static void snd_pcm_lib_preallocate_dma_free(struct snd_pcm_substream *substream */ void snd_pcm_lib_preallocate_free(struct snd_pcm_substream *substream) { - snd_pcm_lib_preallocate_dma_free(substream); + do_free_pages(substream->pcm->card, &substream->dma_buffer); } /** -- 2.20.1

2 1