October 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH AUTOSEL 5.9 096/111] ALSA: hda/ca0132 - Add AE-7 microphone selection commands.
by Sasha Levin 18 Oct '20

18 Oct '20

From: Connor McAdams <conmanx360(a)gmail.com> [ Upstream commit ed93f9750c6c2ed371347d0aac3dcd31cb9cf256 ] Add AE-7 quirk data for setting of microphone. The AE-7 has no front panel connector, so only rear-mic/line-in have new commands. Signed-off-by: Connor McAdams <conmanx360(a)gmail.com> Link: https://lore.kernel.org/r/20200825201040.30339-19-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/patch_ca0132.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index b7dbf2e7f77af..c68669911de0a 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -4675,6 +4675,15 @@ static int ca0132_alt_select_in(struct hda_codec *codec) ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); tmp = FLOAT_THREE; break; + case QUIRK_AE7: + ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); + tmp = FLOAT_THREE; + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, + SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, + SR_96_000); + dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO); + break; default: tmp = FLOAT_ONE; break; @@ -4720,6 +4729,14 @@ static int ca0132_alt_select_in(struct hda_codec *codec) case QUIRK_AE5: ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); break; + case QUIRK_AE7: + ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f); + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, + SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, + SR_96_000); + dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO); + break; default: break; } @@ -4729,7 +4746,10 @@ static int ca0132_alt_select_in(struct hda_codec *codec) if (ca0132_quirk(spec) == QUIRK_R3DI) chipio_set_conn_rate(codec, 0x0F, SR_96_000); - tmp = FLOAT_ZERO; + if (ca0132_quirk(spec) == QUIRK_AE7) + tmp = FLOAT_THREE; + else + tmp = FLOAT_ZERO; dspio_set_uint_param(codec, 0x80, 0x00, tmp); switch (ca0132_quirk(spec)) { -- 2.25.1

1 0

dcef48f "add support for AMD acp microphone devices" can break pulseaudio
by GitHub issues - opened 18 Oct '20

18 Oct '20

alsa-project/alsa-ucm-conf issue #54 was opened from danielrparks: I recently upgraded alsa-ucm-conf from 1.2.3 to 1.2.4 on Arch Linux, and now pulseaudio fails to initialize my sound card. This system is a Dell Inspiron 7405 with a Ryzen 7 4700U and a Realtek ALC3204 sound card. The microphone is handled by the audio co-processor. Pulseaudio generates the following error: ``` Failed to find a working profile. Failed to load module "module-alsa-card" (argument: "device_id="1" name="pci-0000_03_00.6" card_name="alsa_card.pci-0000_03_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1""): initialization failed. ``` [notworking-journal.txt](https://github.com/alsa-project/alsa-ucm-conf/files… [working-pacmd-list-sinks.txt](https://github.com/alsa-project/alsa-ucm-conf… I did a git bisect and got this: ``` dcef48f13d4f5db79b006755074940b94730a883 is the first bad commit commit dcef48f13d4f5db79b006755074940b94730a883 Author: Jaroslav Kysela <perex(a)perex.cz> Date: Wed Jun 24 13:39:07 2020 +0200 HDA-Intel: add support for AMD acp microphone devices - move the generic HDA code from sof-hda-dsp to HDA-Intel - add generic codecs/hda/hdmi.conf Signed-off-by: Jaroslav Kysela <perex(a)perex.cz> ucm2/HDA-Intel/HDA-Capture-value.conf | 4 + ucm2/HDA-Intel/HDA-Intel.conf | 28 +++++++ ucm2/HDA-Intel/Hdmi.conf | 37 +++++++++ ucm2/HDA-Intel/HiFi-acp.conf | 8 ++ ucm2/HDA-Intel/HiFi-analog.conf | 133 +++++++++++++++++++++++++++++++ ucm2/HDA-Intel/HiFi.conf | 32 ++++++++ ucm2/HDA-Intel/init.conf | 39 +++++++++ ucm2/codecs/hda/hdmi.conf | 25 ++++++ ucm2/module/lib/linked.conf | 3 + ucm2/module/snd_acp3x_rn.conf | 1 + ucm2/sof-hda-dsp/HDA-Capture-value.conf | 4 - ucm2/sof-hda-dsp/Hdmi.conf | 78 +++++------------- ucm2/sof-hda-dsp/HiFi.conf | 135 +------------------------------- 13 files changed, 331 insertions(+), 196 deletions(-) create mode 100644 ucm2/HDA-Intel/HDA-Capture-value.conf create mode 100644 ucm2/HDA-Intel/HDA-Intel.conf create mode 100644 ucm2/HDA-Intel/Hdmi.conf create mode 100644 ucm2/HDA-Intel/HiFi-acp.conf create mode 100644 ucm2/HDA-Intel/HiFi-analog.conf create mode 100644 ucm2/HDA-Intel/HiFi.conf create mode 100644 ucm2/HDA-Intel/init.conf create mode 100644 ucm2/codecs/hda/hdmi.conf create mode 100644 ucm2/module/lib/linked.conf create mode 120000 ucm2/module/snd_acp3x_rn.conf delete mode 100644 ucm2/sof-hda-dsp/HDA-Capture-value.conf ``` Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/54 Repository URL: https://github.com/alsa-project/alsa-ucm-conf

1 0

Add Slovak translation
by GitHub pull_request - opened 18 Oct '20

18 Oct '20

alsa-project/alsa-utils pull request #68 was opened from jose1711: Request URL : https://github.com/alsa-project/alsa-utils/pull/68 Patch URL : https://github.com/alsa-project/alsa-utils/pull/68.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

Add amixer --view, to filter playback, capture or all
by GitHub issues - edited 18 Oct '20

18 Oct '20

alsa-project/alsa-utils issue #67 was edited from jidanni: alsamixer has ``` -V, --view <mode> Select the starting view mode, either playback, capture or all. ``` Perhaps amixer could also have something similar, e.g., so that ``` $ amixer --view capture ``` would only dump the capture related settings. Currently one could say that ``` $ amixer --view all ``` is the default. Issue URL : https://github.com/alsa-project/alsa-utils/issues/67 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

Add amixer --view, to filter playback, capture or all
by GitHub issues - opened 18 Oct '20

18 Oct '20

alsa-project/alsa-utils issue #67 was opened from jidanni: alsamixer has ``` -V, --view <mode> Select the starting view mode, either playback, capture or all. ``` Perhaps amixer could also have something similar,' e.g., so that ``` $ amixer --view capture ``` would only dump the capture related settings. Currently one could say that ``` $ amixer --view all ``` is the default. Issue URL : https://github.com/alsa-project/alsa-utils/issues/67 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

Fix grammar mess.
by GitHub pull_request - opened 18 Oct '20

18 Oct '20

alsa-project/alsa-utils pull request #66 was opened from jidanni: Fix grammar mess. Request URL : https://github.com/alsa-project/alsa-utils/pull/66 Patch URL : https://github.com/alsa-project/alsa-utils/pull/66.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

arecord/aplay man page should separate the options into three lists…
by GitHub issues - edited 18 Oct '20

18 Oct '20

alsa-project/alsa-utils issue #65 was edited from jidanni: The arecord/aplay man page should perhaps separate the options into three lists 1. ones that affect recording, 2. ones that affect playing, 2. and ones that affect both. Issue URL : https://github.com/alsa-project/alsa-utils/issues/65 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

arecord/aplay man page should separate the options into three lists…
by GitHub issues - opened 18 Oct '20

18 Oct '20

alsa-project/alsa-utils issue #65 was opened from jidanni: The arecord/aplay man page should perhaps separate the options into three lists, ones that affect recording, ones that affect playing, and ones that affect both. Issue URL : https://github.com/alsa-project/alsa-utils/issues/65 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

alsamixer: add "restore defaults" keystroke
by GitHub issues - opened 18 Oct '20

18 Oct '20

alsa-project/alsa-utils issue #64 was opened from jidanni: There should be a way to "restore defaults" for all levels for this sound card. And perhaps for each level individually too. Issue URL : https://github.com/alsa-project/alsa-utils/issues/64 Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH] ALSA: hda/ca0132: make some const arrays static, makes object smaller
by Colin King 17 Oct '20

17 Oct '20

From: Colin Ian King <colin.king(a)canonical.com> Don't populate const arrays on the stack but instead make them static. Makes the object code smaller by 57 bytes. Before: text data bss dec hex filename 173256 38016 192 211464 33a08 sound/pci/hda/patch_ca0132.o After: text data bss dec hex filename 172879 38336 192 211407 339cf sound/pci/hda/patch_ca0132.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/pci/hda/patch_ca0132.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 2b38b2a716a1..e0c38f2735c6 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7910,8 +7910,12 @@ static void ae7_post_dsp_asi_stream_setup(struct hda_codec *codec) static void ae7_post_dsp_pll_setup(struct hda_codec *codec) { - const unsigned int addr[] = { 0x41, 0x45, 0x40, 0x43, 0x51 }; - const unsigned int data[] = { 0xc8, 0xcc, 0xcb, 0xc7, 0x8d }; + static const unsigned int addr[] = { + 0x41, 0x45, 0x40, 0x43, 0x51 + }; + static const unsigned int data[] = { + 0xc8, 0xcc, 0xcb, 0xc7, 0x8d + }; unsigned int i; for (i = 0; i < ARRAY_SIZE(addr); i++) { @@ -7925,10 +7929,12 @@ static void ae7_post_dsp_pll_setup(struct hda_codec *codec) static void ae7_post_dsp_asi_setup_ports(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; - const unsigned int target[] = { 0x0b, 0x04, 0x06, 0x0a, 0x0c, 0x11, - 0x12, 0x13, 0x14 }; - const unsigned int data[] = { 0x12, 0x00, 0x48, 0x05, 0x5f, 0xff, - 0xff, 0xff, 0x7f }; + static const unsigned int target[] = { + 0x0b, 0x04, 0x06, 0x0a, 0x0c, 0x11, 0x12, 0x13, 0x14 + }; + static const unsigned int data[] = { + 0x12, 0x00, 0x48, 0x05, 0x5f, 0xff, 0xff, 0xff, 0x7f + }; unsigned int i; mutex_lock(&spec->chipio_mutex); -- 2.27.0

2 1