October 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH v8 0/7] Qualcomm's lpass-hdmi ASoC driver to support audio over dp port
by Srinivasa Rao Mandadapu 05 Oct '20

05 Oct '20

These patches are to support audio over DP port on Qualcomm's SC7180 LPASS Asoc. It includes machine driver, cpu driver, platform driver updates for HDMI path support, device tree documention, lpass variant structure optimization and configuration changes. These patches depends on the DP patch series https://patchwork.kernel.org/project/dri-devel/list/?series=332029 https://lore.kernel.org/patchwork/project/lkml/list/?series=464856 changes since V7: -- Fixed typo errors -- Separated buffer size change patche changes since V6: -- Removed compile time define flag, which used for enabling HDMI code, based on corresponding config param is included. -- Updated reg map alloc API with reg map bulk API. -- Removed unnecessary line splits changes since V5: -- Removed unused struct regmap *map in lpass_platform_alloc_hdmidmactl_fields. -- DMA alloc and free API signature change in lpass-apq8016.c, lpass-ipq806x.c -- Keeping API "irqreturn_t lpass_platform_hdmiif_irq" under ifdef macro Changes Since v4: -- Updated with single compatible node for both I2S and HDMI. Changes Since v3: -- Removed id in lpass variant structure and used snd_soc_dai_driver id. Changes Since v2: -- Audio buffer size(i.e. LPASS_PLATFORM_BUFFER_SIZE) in lpass-platform.c increased. Changes Since v1: -- Commit messages are updated -- Addressed Rob Herring review comments V Sujith Kumar Reddy (8): ASoC: Add sc7180-lpass binding header hdmi define ASoC: dt-bindings: Add dt binding for lpass hdmi Asoc:qcom:lpass-cpu:Update dts property read API Asoc: qcom: lpass:Update lpaif_dmactl members order ASoC: qcom: Add support for lpass hdmi driver Asoc: qcom: lpass-platform : Increase buffer size ASoC: qcom: sc7180: Add support for audio over DP .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 +++- include/dt-bindings/sound/sc7180-lpass.h | 1 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 4 +- sound/soc/qcom/lpass-cpu.c | 53 ++- sound/soc/qcom/lpass-hdmi.c | 470 +++++++++++++++++++++ sound/soc/qcom/lpass-hdmi.h | 122 ++++++ sound/soc/qcom/lpass-ipq806x.c | 4 +- sound/soc/qcom/lpass-lpaif-reg.h | 52 ++- sound/soc/qcom/lpass-platform.c | 403 ++++++++++++++---- sound/soc/qcom/lpass-sc7180.c | 116 ++++- sound/soc/qcom/lpass.h | 119 +++++- 13 files changed, 1280 insertions(+), 145 deletions(-) create mode 100644 sound/soc/qcom/lpass-hdmi.c create mode 100644 sound/soc/qcom/lpass-hdmi.h -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

3 10

[PATCH v9 0/7] Qualcomm's lpass-hdmi ASoC driver to support audio over dp port
by Srinivasa Rao Mandadapu 05 Oct '20

05 Oct '20

These patches are to support audio over DP port on Qualcomm's SC7180 LPASS Asoc. It includes machine driver, cpu driver, platform driver updates for HDMI path support, device tree documention, lpass variant structure optimization and configuration changes. These patches depends on the DP patch series https://patchwork.kernel.org/project/dri-devel/list/?series=332029 https://lore.kernel.org/patchwork/project/lkml/list/?series=464856 changes since V8: -- Removed extra structure wrapper for reg map field memebrs -- Updated lpass_hdmi_regmap_volatile API with appropriate registers as true and others as false. changes since V7: -- Fixed typo errors -- Created Separate patch for buffer size change changes since V6: -- Removed compile time define flag, which used for enabling HDMI code, based on corresponding config param is included. -- Updated reg map alloc API with reg map bulk API. -- Removed unnecessary line splits changes since V5: -- Removed unused struct regmap *map in lpass_platform_alloc_hdmidmactl_fields. -- DMA alloc and free API signature change in lpass-apq8016.c, lpass-ipq806x.c -- Keeping API "irqreturn_t lpass_platform_hdmiif_irq" under ifdef macro Changes Since v4: -- Updated with single compatible node for both I2S and HDMI. Changes Since v3: -- Removed id in lpass variant structure and used snd_soc_dai_driver id. Changes Since v2: -- Audio buffer size(i.e. LPASS_PLATFORM_BUFFER_SIZE) in lpass-platform.c increased. Changes Since v1: -- Commit messages are updated -- Addressed Rob Herring review comments V Sujith Kumar Reddy (8): ASoC: Add sc7180-lpass binding header hdmi define ASoC: dt-bindings: Add dt binding for lpass hdmi Asoc:qcom:lpass-cpu:Update dts property read API Asoc: qcom: lpass:Update lpaif_dmactl members order ASoC: qcom: Add support for lpass hdmi driver Asoc: qcom: lpass-platform : Increase buffer size ASoC: qcom: sc7180: Add support for audio over DP .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 +++- include/dt-bindings/sound/sc7180-lpass.h | 1 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 4 +- sound/soc/qcom/lpass-cpu.c | 53 ++- sound/soc/qcom/lpass-hdmi.c | 469 +++++++++++++++++++++ sound/soc/qcom/lpass-hdmi.h | 122 ++++++ sound/soc/qcom/lpass-ipq806x.c | 4 +- sound/soc/qcom/lpass-lpaif-reg.h | 52 ++- sound/soc/qcom/lpass-platform.c | 403 ++++++++++++++---- sound/soc/qcom/lpass-sc7180.c | 116 ++++- sound/soc/qcom/lpass.h | 119 +++++- 13 files changed, 1279 insertions(+), 145 deletions(-) create mode 100644 sound/soc/qcom/lpass-hdmi.c create mode 100644 sound/soc/qcom/lpass-hdmi.h -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

1 7

Re: [PATCH 0/6] Ancillary bus implementation and SOF multi-client support
by Leon Romanovsky 05 Oct '20

05 Oct '20

Hi Dave, I don't know why did you send this series separately to every mailing list, but it is not correct thing to do. RDMA ML and discussion: https://lore.kernel.org/linux-rdma/20201001050534.890666-1-david.m.ertman@i… Netdev ML (completely separated): https://lore.kernel.org/netdev/20201001050851.890722-1-david.m.ertman@intel… Alsa ML (separated too): https://lore.kernel.org/alsa-devel/20200930225051.889607-1-david.m.ertman@i… Thanks On Wed, Sep 30, 2020 at 10:05:28PM -0700, Dave Ertman wrote: > Brief history of Ancillary Bus > ============================== > The ancillary bus code was originally submitted upstream as virtual > bus, and was submitted through the netdev tree.  This process generated > up to v4.  This discussion can be found here: > https://lore.kernel.org/netdev/0200520070227.3392100-2-jeffrey.t.kirsher@in… > > At this point, GregKH requested that we take the review and revision > process to an internal mailing list and garner the buy-in of a respected > kernel contributor. > > The ancillary bus (then known as virtual bus) was originally submitted > along with implementation code for the ice driver and irdma drive, > causing the complication of also having dependencies in the rdma tree. > This new submission is utilizing an ancillary bus consumer in only the > sound driver tree to create the initial implementation and a single > user. > > Since implementation work has started on this patch set, there have been > multiple inquiries about the time frame of its completion. It appears > that there will be numerous consumers of this functionality. > > The process of internal review and implementation using the sound > drivers generated 19 internal versions.  The changes, including the name > change from virtual bus to ancillary bus, from these versions can be > summarized as the following: > > - Fixed compilation and checkpatch errors > - Improved documentation to address the motivation for virtual bus. > - Renamed virtual bus to ancillary bus > - increased maximum device name size > - Correct order in Kconfig and Makefile > - removed the mid-layer adev->release layer for device unregister > - pushed adev->id management to parent driver > - all error paths out of ancillary_device_register return error code > - all error paths out of ancillary_device_register use put_device > - added adev->name element > - modname in register cannot be NULL > - added KBUILD_MODNAME as prefix for match_name > - push adev->id responsibility to registering driver > - uevent now parses adev->dev name > - match_id function now parses adev->dev name > - changed drivers probe function to also take an ancillary_device_id param > - split ancillary_device_register into device_initialize and device_add > - adjusted what is done in device_initialize and device_add > - change adev to ancildev and adrv to ancildrv > - change adev to ancildev in documentation > > This submission is the first time that this patch set will be sent to > the alsa-devel mailing list, so it is currently being submitted as > version 1. > > ========================== > > Introduces the ancillary bus implementation along with the example usage > in the Sound Open Firmware(SOF) audio driver. > > In some subsystems, the functionality of the core device > (PCI/ACPI/other) may be too complex for a single device to be managed as > a monolithic block or a part of the functionality might need to be > exposed to a different subsystem. Splitting the functionality into > smaller orthogonal devices makes it easier to manage data, power > management and domain-specific communication with the hardware. Also, > common ancillary_device functionality across primary devices can be > handled by a common ancillary_device. A key requirement for such a split > is that there is no dependency on a physical bus, device, register > accesses or regmap support. These individual devices split from the core > cannot live on the platform bus as they are not physical devices that > are controlled by DT/ACPI. The same argument applies for not using MFD > in this scenario as it relies on individual function devices being > physical devices that are DT enumerated. > > An example for this kind of requirement is the audio subsystem where a > single IP handles multiple entities such as HDMI, Soundwire, local > devices such as mics/speakers etc. The split for the core's > functionality can be arbitrary or be defined by the DSP firmware > topology and include hooks for test/debug. This allows for the audio > core device to be minimal and tightly coupled with handling the > hardware-specific logic and communication. > > The ancillary bus is intended to be minimal, generic and avoid > domain-specific assumptions. Each ancillary bus device represents a part > of its parent functionality. The generic behavior can be extended and > specialized as needed by encapsulating an ancillary bus device within > other domain-specific structures and the use of .ops callbacks. > > The SOF driver adopts the ancillary bus for implementing the > multi-client support. A client in the context of the SOF driver > represents a part of the core device's functionality. It is not a > physical device but rather an ancillary device that needs to communicate > with the DSP via IPCs. With multi-client support,the sound card can be > separated into multiple orthogonal ancillary devices for local devices > (mic/speakers etc), HDMI, sensing, probes, debug etc. In this series, > we demonstrate the usage of the ancillary bus with the help of the IPC > test client which is used for testing the serialization of IPCs when > multiple clients talk to the DSP at the same time. > > Dave Ertman (1): > Add ancillary bus support > > Fred Oh (1): > ASoC: SOF: debug: Remove IPC flood test support in SOF core > > Ranjani Sridharan (4): > ASoC: SOF: Introduce descriptors for SOF client > ASoC: SOF: Create client driver for IPC test > ASoC: SOF: ops: Add ops for client registration > ASoC: SOF: Intel: Define ops for client registration > > Documentation/driver-api/ancillary_bus.rst | 230 +++++++++++++++ > Documentation/driver-api/index.rst | 1 + > drivers/bus/Kconfig | 3 + > drivers/bus/Makefile | 3 + > drivers/bus/ancillary.c | 191 +++++++++++++ > include/linux/ancillary_bus.h | 58 ++++ > include/linux/mod_devicetable.h | 8 + > scripts/mod/devicetable-offsets.c | 3 + > scripts/mod/file2alias.c | 8 + > sound/soc/sof/Kconfig | 29 +- > sound/soc/sof/Makefile | 7 + > sound/soc/sof/core.c | 12 + > sound/soc/sof/debug.c | 230 --------------- > sound/soc/sof/intel/Kconfig | 9 + > sound/soc/sof/intel/Makefile | 3 + > sound/soc/sof/intel/apl.c | 18 ++ > sound/soc/sof/intel/bdw.c | 18 ++ > sound/soc/sof/intel/byt.c | 22 ++ > sound/soc/sof/intel/cnl.c | 18 ++ > sound/soc/sof/intel/intel-client.c | 49 ++++ > sound/soc/sof/intel/intel-client.h | 26 ++ > sound/soc/sof/ops.h | 14 + > sound/soc/sof/sof-client.c | 117 ++++++++ > sound/soc/sof/sof-client.h | 65 +++++ > sound/soc/sof/sof-ipc-test-client.c | 314 +++++++++++++++++++++ > sound/soc/sof/sof-priv.h | 16 +- > 26 files changed, 1233 insertions(+), 239 deletions(-) > create mode 100644 Documentation/driver-api/ancillary_bus.rst > create mode 100644 drivers/bus/ancillary.c > create mode 100644 include/linux/ancillary_bus.h > create mode 100644 sound/soc/sof/intel/intel-client.c > create mode 100644 sound/soc/sof/intel/intel-client.h > create mode 100644 sound/soc/sof/sof-client.c > create mode 100644 sound/soc/sof/sof-client.h > create mode 100644 sound/soc/sof/sof-ipc-test-client.c > > -- > 2.26.2 >

3 4

treewide: fix typos in manual pages
by GitHub pull_request - opened 03 Oct '20

03 Oct '20

alsa-project/alsa-utils pull request #61 was opened from ferivoz: Signed-off-by: Samanta Navarro <ferivoz(a)riseup.net> Request URL : https://github.com/alsa-project/alsa-utils/pull/61 Patch URL : https://github.com/alsa-project/alsa-utils/pull/61.patch Repository URL: https://github.com/alsa-project/alsa-utils

1 0

[PATCH v5 00/20] Add Allwinner H3/H5/H6/A64 HDMI audio
by Clément Péron 03 Oct '20

03 Oct '20

Hi, This is exactly the same as v4 but with more details in some commit log and also device-tree soundcard and DAI node have been merged. Regards, Clement Change since v4; - add more comment on get_wss() and set_channel_cfg() patch - merge soundcard and DAI HDMI patches Change since v3: - add Samuel Holland patch to reconfigure FIFO_TX_REG when suspend is enabled - readd inversion to H6 LRCK sun50i_h6_i2s_set_soc_fmt() - Fix get_wss() for sun4i - Add a commit to fix checkpatch warning Change since v2: - rebase on next-20200918 - drop revert LRCK polarity patch - readd simple-audio-card,frame-inversion in dts - Add patch for changing set_chan_cfg params Change since v1: - rebase on next-20200828 - add revert LRCK polarity - remove all simple-audio-card,frame-inversion in dts - add Ondrej patches for Orange Pi board - Add arm64 defconfig patch Clément Péron (6): ASoC: sun4i-i2s: Change set_chan_cfg() params ASoC: sun4i-i2s: Change get_sr() and get_wss() to be more explicit ASoC: sun4i-i2s: Fix sun8i volatile regs arm64: dts: allwinner: h6: Enable HDMI sound for Beelink GS1 arm64: defconfig: Enable Allwinner i2s driver ASoC: sun4i-i2s: fix coding-style for callback definition Jernej Skrabec (3): ASoC: sun4i-i2s: Add support for H6 I2S dt-bindings: ASoC: sun4i-i2s: Add H6 compatible arm64: dts: allwinner: h6: Add DAI node and soundcard for HDMI Marcus Cooper (7): ASoC: sun4i-i2s: Set sign extend sample ASoc: sun4i-i2s: Add 20 and 24 bit support arm: dts: sunxi: h3/h5: Add DAI node and soundcard for HDMI arm64: dts: allwinner: a64: Add DAI node and soundcard for HDMI arm: sun8i: h3: Add HDMI audio to Orange Pi 2 arm: sun8i: h3: Add HDMI audio to Beelink X2 arm64: dts: allwinner: a64: Add HDMI audio to Pine64 Ondrej Jirman (3): arm64: dts: allwinner: Enable HDMI audio on Orange Pi PC 2 ARM: dts: sun8i-h3: Enable HDMI audio on Orange Pi PC/One arm64: dts: sun50i-h6-orangepi-3: Enable HDMI audio Samuel Holland (1): ASoC: sun4i-i2s: Fix setting of FIFO modes .../sound/allwinner,sun4i-a10-i2s.yaml | 2 + arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 8 + arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 + arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 + arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 + arch/arm/boot/dts/sunxi-h3-h5.dtsi | 33 ++ .../boot/dts/allwinner/sun50i-a64-pine64.dts | 8 + arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 34 ++ .../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 8 + .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 8 + .../dts/allwinner/sun50i-h6-orangepi-3.dts | 8 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++ arch/arm64/configs/defconfig | 1 + sound/soc/sunxi/sun4i-i2s.c | 374 +++++++++++++++--- 14 files changed, 487 insertions(+), 54 deletions(-) -- 2.25.1

3 39

[PATCH] ASoC: hdac_hdmi: remove cancel_work_sync in runtime suspend
by Brent Lu 02 Oct '20

02 Oct '20

A deadlock is identified when there are three contexts running at the same time: - a HDMI jack work which is calling snd_soc_dapm_sync(). - user space is calling snd_pcm_release() to close pcm device. - pm is calling runtime suspend function of HDMI codec driver. By removing the clear_dapm_works() invocation in the hdac_hdmi_runtime_suspend() function, the snd_pcm_release() could always returns from dapm_power_widgets() function call without blocking the hdac_hdmi_jack_dapm_work() work thread or being blocked by the hdac_hdmi_runtime_suspend() function. The purpose of the jack work is to enable/disable the dapm jack pin so it's not necessary to cancel the work in runtime suspend function which is usually called when pcm device is closed. Signed-off-by: Brent Lu <brent.lu(a)intel.com> --- sound/soc/codecs/hdac_hdmi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index f26b77f..9052edd 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -2097,8 +2097,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) if (!bus) return 0; - clear_dapm_works(hdev); - /* * Power down afg. * codec_read is preferred over codec_write to set the power state. -- 2.7.4

3 2

[PATCH -next] ASoC: qcom: fix SDM845 & QDSP6 dependencies more
by Randy Dunlap 02 Oct '20

02 Oct '20

Fix a build error and Kconfig warning in sound/soc/qcom/. ld: sound/soc/qcom/qdsp6/q6afe-clocks.o: in function `q6afe_clock_dev_probe': q6afe-clocks.c:(.text+0x182): undefined reference to `devm_clk_hw_register' ld: q6afe-clocks.c:(.text+0x19d): undefined reference to `of_clk_add_hw_provider' After adding "depends on COMMON_CLK" for SND_SOC_QDSP6, the Kconfig warning appears because "select" does not honor any "depends on" clauses, so fix the dependency for SND_SOC_SDM845 also. WARNING: unmet direct dependencies detected for SND_SOC_QDSP6 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && COMMON_CLK [=n] Selected by [y]: - SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && I2C [=y] && SOUNDWIRE [=y] Fixes: 520a1c396d19 ("ASoC: q6afe-clocks: add q6afe clock controller") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org --- sound/soc/qcom/Kconfig | 2 ++ 1 file changed, 2 insertions(+) --- linux-next-20201001.orig/sound/soc/qcom/Kconfig +++ linux-next-20201001/sound/soc/qcom/Kconfig @@ -82,6 +82,7 @@ config SND_SOC_QDSP6_ASM_DAI config SND_SOC_QDSP6 tristate "SoC ALSA audio driver for QDSP6" depends on QCOM_APR + depends on COMMON_CLK select SND_SOC_QDSP6_COMMON select SND_SOC_QDSP6_CORE select SND_SOC_QDSP6_AFE @@ -110,6 +111,7 @@ config SND_SOC_MSM8996 config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" depends on QCOM_APR && I2C && SOUNDWIRE + depends on COMMON_CLK select SND_SOC_QDSP6 select SND_SOC_QCOM_COMMON select SND_SOC_RT5663

3 2

[PATCH] ASoC: fsl_spdif: Remove unused np
by Mark Brown 02 Oct '20

02 Oct '20

Reported-by: Stephen Rothwell <sfr(a)canb.auug.org.au> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/fsl/fsl_spdif.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 9c5607780590..b0f643fefe1e 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -1252,7 +1252,6 @@ static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, static int fsl_spdif_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; struct fsl_spdif_priv *spdif_priv; struct spdif_mixer_control *ctrl; struct resource *res; -- 2.20.1

1 1

[PATCH 0/2] Add driver for Microchip S/PDIF RX
by Codrin Ciubotariu 02 Oct '20

02 Oct '20

The Sony/Philips Digital Interface Receiver (SPDIFRX) is a serial port compliant with the IEC-60958 standard. Among its caracteristics, we mention the following: - SPDIF/AES-EBU Compatible Serial Port - 32 Samples FIFO - Data Width Configurable to 24 bits, 20 bits or 16 bits - Packed and Unpacked Data Support for System Memory Optimization - Line State Events Report and Source of Interrupt - Line Error Rate Report - Full Memory Map of 192 bits for Channel 1 and Channel 2 Status and User Data - First 32-bit Status A, Status B Change Report and Source of Interrupt - Line Digital Filter - Register Write Protection - Abnormal Software Access and Internal Sequencer Integrity Check Reports This interface is available in Microchip's SAMA7G5 SoC. Codrin Ciubotariu (2): dt-bindings: sound: add DT bindings for Microchip S/PDIF RX Controller ASoC: mchp-spdifrx: add driver for SPDIF RX .../bindings/sound/mchp,spdifrx.yaml | 73 ++ sound/soc/atmel/Kconfig | 13 + sound/soc/atmel/Makefile | 2 + sound/soc/atmel/mchp-spdifrx.c | 954 ++++++++++++++++++ 4 files changed, 1042 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml create mode 100644 sound/soc/atmel/mchp-spdifrx.c -- 2.25.1

2 3

[PATCH v10 00/14] ASoC: Intel: Catpt - Lynx and Wildcat point
by Cezary Rojewski 02 Oct '20

02 Oct '20

Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt solution deprecates existing sound/soc/intel/haswell which is removed in the following series. Due to high range of errors and desynchronization from recommendations set by Windows solution, re-write came as a lower-cost solution compared to refactoring /haswell/ with several series of patches. Series is dependent on linux-spi change: spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers https://www.spinics.net/lists/linux-spi/msg23885.html which has been already merged and is now part of linux-spi tree. Bulk of series content is device driver core code - everything up to patch 7/14 - with fs entries and trace macros introduced right after. While each core patch is shaped in such a way that no unavailable members are ever called, until patch 14/14 is applied, no code compilation can occur as no Makefile is present. Once said patch is added, Makefile and Kconfig are implemented and driver module compiles as expected. Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing their LPT/WPT AudioDSP architecture expertise as well as helping backtrack its historical background. My thanks go to Amadeusz Slawinski for reviews and improvements proposed on and off the internal list. Most of internal diff below is his contribution. Krzysztof Hejmowski helped me setup my own Xtensa environment and recompile LPT/WPT FW binary sources what sped up the development greatly. This would not have been possible without help from these champions, especially considering how quickly the catpt was written: 2 weeks features, 3 weeks optimizations. Thank you. Userspace-exposed members are compatible with what is exposed by deprecated solution as well as FW binary being re-used thus no harm is done. The only visible differences are: the newly added 'Loopback Mute' kcontrol and volume support extending to quad from stereo. On top of fixing erros and design flows, catpt also adds module reload, dynamic SRAM memory allocation during PCM runtime and exposes missing userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs fw-version entries. Event tracing is provided to ease solution debugging. Following are not included in this update and are scheduled as later addition: - fw logging - module (library) support Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. Note #2: Both LPT and WPT power up/down sequences may get optimized in future updates as thanks to help from the Windows team, most of nuances behind why/what/when in regard to hw registers have been backtracked and reviewed again. Link to developer's deep dive message: https://www.spinics.net/lists/alsa-devel/msg113563.html Changes in v10: - reverted DUAL_MONO case relocation from v9 - indented all constants of enum catpt_module_id to the same column - new newline appended for return path of catpt_dsp_do_send_msg() Changes in v9: https://www.spinics.net/lists/alsa-devel/msg116305.html - fixed newlines in sysfs as requested by Andy, left tags as no other changes done - removed volume_map and replaced by simple formulas for volume kcontrol calculations - removed redundant parentheses in catpt_get_channel_map() and relocated DUAL_MONO case - runtime suspend no longer called during module unload - removed redundant size checks for catpt_dsp_send_tx() and catpt_dsp_copy_rx() Changes in v8: https://www.spinics.net/lists/alsa-devel/msg116168.html - updated catpt_arrange_page_table() with GENMASK and U32_MAX usage - made use of PFN_DOWN() replacing explicit right shitfs by PAGE_SIZE - made fw hash dumping in catpt_coredump() more readable and removed hardcodes - catpt_coredump() dumps fw hash now only if said segment has been found within fw_info - shortened _MSECS suffixes to _MS - IPC structs no longer contain enum members - simplified definition of catpt_set_dspvol() Changes in v7: https://www.spinics.net/lists/alsa-devel/msg116019.html - fixed licence header for fs.c - renamed fs.c to sysfs.c to better match its purpose - added documentation within Documentation/ABI/testing for entries exposed by catpt - bin_attribute fw_build replaced by attribute fw_info: fw_info contains full FW information and after successful handshake, it's always available (stored in driver data) so no need to invoke GET_FW_VERSION IPC again, just dump the stored information - rather than manually creating and removing sysfs files, now makes use of dev_groups member of struct device_driver - patch: 10/14 'ASoC: Intel: Select catpt and deprecate haswell' has been moved to the back of the list: enable catpt after machine boards have been prepared for it first - improved readability of several goto labels Changes in v6: https://www.spinics.net/lists/alsa-devel/msg115765.html - reordered and reorganized code for patches 1/13 - 8/13 of v5, so each patches makes use of no member or function which is unavailable to it. Series size increased from 13 to 14 patches: addition of base members e.g.: registers has been split from addition of device.c file which describes acpi device behavior Changes in v5: https://www.spinics.net/lists/alsa-devel/msg115621.html Basically everything below is result of Andy's review. Thank you Andy for taking time into this detailed review - catpt now makes use of common linux/pxa2xx_ssp.h header file, removing redundant SSP register declarations in the process. As stated in the opening, this is dependent upon linux-spi change: spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers - updated Kconfig by removing DMADEVICES and adding COMPILE_TEST as optional depends-on - updated all register macros definitions to be more safe against common arithmetics when specifying macro's parameters - removed CONFIG_PM and CONFIG_PM_SLEEP usage in favor of __maybe_unused - all 'if (ret < 0)' converted to simple 'if (ret)' whenever possible - fixed erroneous check for platform_device_register_data within catpt_register_board() - _SLAVE/_MASTER replaced with more inclusive _CONSUMER/_PROVIDER for enum catpt_ssp_mode - catpt_acpi_probe() is now making use of high-level wrappers for ioremapping and resource assignment, reducing function's code size - due to improved catpt_acpi_probe() behavior, catpt_acpi_remove() needs not to cast dma_free_coherent() any longer - DMA source and destrination maxburst now of value 16, see: https://www.spinics.net/lists/alsa-devel/msg114394.html - simplified catpt_dsp_update_lpclock() as list_for_each_entry() is empty-safe by default - dropped '_SSP_' from all names of all CATPT_SSP_SSXXX_DEFAULT macros - catpt_updatel_pci now makes use of linux/pci.h and uapi/linux/pci.h constants such as: PCI_PM_CTRL_STATE_MASK and PCI_D3hot Changes in v4: https://www.spinics.net/lists/alsa-devel/msg113762.html - fixed compilation with i386 kconfig (conflicting names) - streamlined naming for SHIM and PCI registers to match SSP ones (SHIM_REG -> SHIM) - catpt_component_probe removed and kcontrols again initializzed statically via snd_kcontrol_new array: this is to remove kctl->id.device shenanigans - renamed catpt_set_ctlvol to catpt_set_dspvol - function name wasn't matching its purpose Changes in v3: - fixed IRAM mask usage in lpt_dsp_power_up (dsp.c) - updated dbg message formatting in catpt_restore_fwimage as suggested by Andy - fixed alignment for struct catpt_ssp_device_format - catpt_set_ctlvol now verifies all-equal scenario based on all channels rather than just first two as requested by Amadeo - fixed SPDX for registers.h Changes in v2: https://www.spinics.net/lists/alsa-devel/msg113660.html - fixed SPDX formatting for all header files as well as pcm.c - fixed size provided to memcpy() in fw_build_read() as reported by Mark - renamed struct catpt_pdata to struct catpt_spec (cosmetic) - fixed erroneous path in catpt_load_block: region is properly released - trace.h events for updating registers have been removed and usages replaced by dev_dbg (SRAMPGE/ LPCS) - as requested by Andy, struct resource has replaced struct catpt_mbank and struct catpt_mregion. This change cascaded into: - catpt_mbank_size and catpt_mregion_size replaced by resource_size - catpt_mregion_intersects replaced by resource_overlaps - all catpt_mbank_ and catpt_mregion_ handlers found in loader.c (_request, _reserve, _release, _extract, _split, _join) have been removed - __request_region and __release_region have been enlisted in their place - catpt_mregion_intersecting renamed to catpt_resource_overlapping - catpt_request_region helper has been provided to deal with -size based requests o haven't found direct replacements in resource.c/ ioport.h for both functions - catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init and catpt_sram_free respectively - catpt_sram_init now returns void instead of int and has been converted to simple initialized. This change ultimately cascaded into: o both SRAM banks initialization being moved to catpt_dev_init from catpt_acpi_probe (device.c) o catpt_dev::spec is now initialized first, with catpt_dev_init following it soon after o catpt_acpi_probe erroneous path has been simplified as SRAM banks no longer need to be freed - catpt_sram_free now frees all resources via child -> sibling enumeration rather than region_list iteration - catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new argument: unsigned long mask. Caused by removal of catpt_mbank - mask is taken directly from catpt_dev::spec::d/iram_mask - trace.h events for catpt_mbank and catpt_mregion have been removed Diff against last drop on internal list: https://www.spinics.net/lists/alsa-devel/msg113549.html - replaced spinlock with mutex for mregion allocation and release to address sleeping in atomic context warnings - fixed coredump fw_hash dumping - kcontrol values are now always stored regardless of stream of interest is running or not - kcontrol values are now applied after stream is prepared instead of ignoring what has been set by user initially - catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and wpt_ respectively - reordered Makefile .o(s) (cosmetic) Cezary Rojewski (14): ASoC: Intel: Add catpt base members ASoC: Intel: catpt: Implement IPC protocol ASoC: Intel: catpt: Add IPC message handlers ASoC: Intel: catpt: Define DSP operations ASoC: Intel: catpt: Firmware loading and context restore ASoC: Intel: catpt: PCM operations ASoC: Intel: catpt: Device driver lifecycle ASoC: Intel: catpt: Event tracing ASoC: Intel: catpt: Simple sysfs attributes ASoC: Intel: haswell: Remove haswell-solution specific code ASoC: Intel: broadwell: Remove haswell-solution specific code ASoC: Intel: bdw-5650: Remove haswell-solution specific code ASoC: Intel: bdw-5677: Remove haswell-solution specific code ASoC: Intel: Select catpt and deprecate haswell .../ABI/testing/sysfs-bus-pci-devices-catpt | 16 + sound/soc/intel/Kconfig | 24 +- sound/soc/intel/Makefile | 2 +- sound/soc/intel/boards/Kconfig | 8 +- sound/soc/intel/boards/bdw-rt5650.c | 36 - sound/soc/intel/boards/bdw-rt5677.c | 33 - sound/soc/intel/boards/broadwell.c | 33 - sound/soc/intel/boards/haswell.c | 28 +- sound/soc/intel/catpt/Makefile | 6 + sound/soc/intel/catpt/core.h | 188 +++ sound/soc/intel/catpt/device.c | 352 +++++ sound/soc/intel/catpt/dsp.c | 578 ++++++++ sound/soc/intel/catpt/ipc.c | 298 +++++ sound/soc/intel/catpt/loader.c | 671 ++++++++++ sound/soc/intel/catpt/messages.c | 313 +++++ sound/soc/intel/catpt/messages.h | 401 ++++++ sound/soc/intel/catpt/pcm.c | 1175 +++++++++++++++++ sound/soc/intel/catpt/registers.h | 178 +++ sound/soc/intel/catpt/sysfs.c | 55 + sound/soc/intel/catpt/trace.h | 83 ++ 20 files changed, 4335 insertions(+), 143 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-pci-devices-catpt create mode 100644 sound/soc/intel/catpt/Makefile create mode 100644 sound/soc/intel/catpt/core.h create mode 100644 sound/soc/intel/catpt/device.c create mode 100644 sound/soc/intel/catpt/dsp.c create mode 100644 sound/soc/intel/catpt/ipc.c create mode 100644 sound/soc/intel/catpt/loader.c create mode 100644 sound/soc/intel/catpt/messages.c create mode 100644 sound/soc/intel/catpt/messages.h create mode 100644 sound/soc/intel/catpt/pcm.c create mode 100644 sound/soc/intel/catpt/registers.h create mode 100644 sound/soc/intel/catpt/sysfs.c create mode 100644 sound/soc/intel/catpt/trace.h -- 2.17.1

4 20