October 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH] sound: drivers: portman2x4: fix repeated word 'if'
by Randy Dunlap 06 Oct '20

06 Oct '20

Correct duplicated word "if" to "if it". Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org --- sound/drivers/portman2x4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- lnx-59-rc8.orig/sound/drivers/portman2x4.c +++ lnx-59-rc8/sound/drivers/portman2x4.c @@ -467,7 +467,7 @@ static int portman_probe(struct parport parport_write_control(p, 0); /* Reset Strobe=0. */ /* Check if Tx circuitry is functioning properly. If initialized - * unit TxEmpty is false, send out char and see if if goes true. + * unit TxEmpty is false, send out char and see if it goes true. */ /* 8 */ parport_write_control(p, TXDATA0); /* Tx channel 0, strobe off. */

2 1

[PATCH 00/13] ASoC: Intel: Remove obsolete solutions and
by Cezary Rojewski 06 Oct '20

06 Oct '20

Follow up to catpt series as mentioned in: [PATCH v10 00/14] ASoC: Intel: Catpt - Lynx and Wildcat point https://www.spinics.net/lists/alsa-devel/msg116440.html As catpt is a direct replacement to sound/soc/intel/haswell, it leaves a lot of code redudant. The second legacy solution - baytrail - is deprecated for a long time by sound/soc/intel/atom with SOF flavor available too. This series addresses the redudancy and removes obsolete code. Along with the legacy solutions, all orphaned components are removed too. As a consequence, further cleanups are unlocked: sound/soc/intel/skylake becomes the sole user of processing code found in sound/soc/intel/common. Those are not part of this series. Cezary Rojewski (13): ASoC: Intel: Remove haswell solution ASoC: Intel: Remove max98090 support for baytrail solution ASoC: Intel: Remove rt5640 support for baytrail solution ASoC: Intel: Remove baytrail solution ASoC: Intel: Remove SST ACPI component ASoC: Intel: Remove SST firmware components ASoC: Intel: Skylake: Unassign ram_read and read_write ops ASoC: Intel: Remove unused DSP operations ASoC: Intel: Remove unused DSP interface fields ASoC: Intel: Remove SST-legacy specific constants ASoC: Intel: Make atom components independent of sst-dsp ASoC: Intel: Remove sst_pdata structure ASoC: Intel: Remove sst_dsp_get_thread_context include/sound/soc-acpi-intel-match.h | 1 - include/trace/events/hswadsp.h | 385 --- sound/soc/intel/Kconfig | 26 - sound/soc/intel/Makefile | 1 - sound/soc/intel/atom/sst/sst.c | 1 - sound/soc/intel/atom/sst/sst.h | 7 + sound/soc/intel/atom/sst/sst_acpi.c | 1 - sound/soc/intel/atom/sst/sst_drv_interface.c | 3 - sound/soc/intel/atom/sst/sst_ipc.c | 1 - sound/soc/intel/atom/sst/sst_loader.c | 1 - sound/soc/intel/atom/sst/sst_pvt.c | 1 - sound/soc/intel/atom/sst/sst_stream.c | 1 - sound/soc/intel/baytrail/Makefile | 5 - sound/soc/intel/baytrail/sst-baytrail-dsp.c | 358 --- sound/soc/intel/baytrail/sst-baytrail-ipc.c | 772 ------ sound/soc/intel/baytrail/sst-baytrail-ipc.h | 64 - sound/soc/intel/baytrail/sst-baytrail-pcm.c | 459 ---- sound/soc/intel/boards/Kconfig | 25 - sound/soc/intel/boards/Makefile | 4 - sound/soc/intel/boards/byt-max98090.c | 182 -- sound/soc/intel/boards/byt-rt5640.c | 224 -- sound/soc/intel/boards/bytcht_es8316.c | 1 - sound/soc/intel/boards/bytcr_rt5640.c | 1 - sound/soc/intel/common/Makefile | 4 - .../intel/common/soc-acpi-intel-byt-match.c | 15 - sound/soc/intel/common/sst-acpi.c | 236 -- sound/soc/intel/common/sst-dsp-priv.h | 284 +-- sound/soc/intel/common/sst-dsp.c | 162 -- sound/soc/intel/common/sst-dsp.h | 222 -- sound/soc/intel/common/sst-firmware.c | 1273 ---------- sound/soc/intel/common/sst-ipc.c | 27 - sound/soc/intel/common/sst-ipc.h | 3 - sound/soc/intel/haswell/Makefile | 5 - sound/soc/intel/haswell/sst-haswell-dsp.c | 705 ------ sound/soc/intel/haswell/sst-haswell-ipc.c | 2222 ----------------- sound/soc/intel/haswell/sst-haswell-ipc.h | 527 ---- sound/soc/intel/haswell/sst-haswell-pcm.c | 1369 ---------- sound/soc/intel/skylake/bxt-sst.c | 2 - sound/soc/intel/skylake/cnl-sst.c | 4 +- sound/soc/intel/skylake/skl-sst-dsp.c | 2 +- sound/soc/intel/skylake/skl-sst-ipc.c | 2 +- sound/soc/intel/skylake/skl-sst.c | 2 - 42 files changed, 11 insertions(+), 9579 deletions(-) delete mode 100644 include/trace/events/hswadsp.h delete mode 100644 sound/soc/intel/baytrail/Makefile delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-dsp.c delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-ipc.c delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-ipc.h delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-pcm.c delete mode 100644 sound/soc/intel/boards/byt-max98090.c delete mode 100644 sound/soc/intel/boards/byt-rt5640.c delete mode 100644 sound/soc/intel/common/sst-acpi.c delete mode 100644 sound/soc/intel/common/sst-firmware.c delete mode 100644 sound/soc/intel/haswell/Makefile delete mode 100644 sound/soc/intel/haswell/sst-haswell-dsp.c delete mode 100644 sound/soc/intel/haswell/sst-haswell-ipc.c delete mode 100644 sound/soc/intel/haswell/sst-haswell-ipc.h delete mode 100644 sound/soc/intel/haswell/sst-haswell-pcm.c -- 2.17.1

5 19

[PATCH] ASoC: mediatek: mt8183-da7219: fix wrong ops for I2S3
by Tzung-Bi Shih 06 Oct '20

06 Oct '20

DA7219 uses I2S2 and I2S3 for input and output respectively. Commit 9e30251fb22e ("ASoC: mediatek: mt8183-da7219: support machine driver with rt1015") introduces a bug that: - If using I2S2 solely, MCLK to DA7219 is 256FS. - If using I2S3 solely, MCLK to DA7219 is 128FS. - If using I2S3 first and then I2S2, the MCLK changes from 128FS to 256FS. As a result, no sound output to the headset. Also no sound input from the headset microphone. Both I2S2 and I2S3 should set MCLK to 256FS. Fixes the wrong ops for I2S3. Fixes: 9e30251fb22e ("ASoC: mediatek: mt8183-da7219: support machine driver with rt1015") Signed-off-by: Tzung-Bi Shih <tzungbi(a)google.com> --- sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c index 4d69ea31bfe4..c2c1eb16fcc0 100644 --- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c +++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c @@ -696,7 +696,7 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev) if (card == &mt8183_da7219_max98357_card) { dai_link->be_hw_params_fixup = mt8183_i2s_hw_params_fixup; - dai_link->ops = &mt8183_mt6358_i2s_ops; + dai_link->ops = &mt8183_da7219_i2s_ops; dai_link->cpus = i2s3_max98357a_cpus; dai_link->num_cpus = ARRAY_SIZE(i2s3_max98357a_cpus); -- 2.28.0.806.g8561365e88-goog

2 1

[RFC PATCH 0/2] ALSA: hda - acomp probe fix for i915
by Kai Vehmanen 06 Oct '20

06 Oct '20

Hi, this simple bugfix started to feel a bit like getting stuck in quicksand, so I'm looking for some early input via this RFC series. Basicly hdac_i915.c should not use global state to track communication with i915 driver. But how to get handle of "hdac_bus*? I considered a few options: 1) add hdac_bus as a member of drm_audio_component.h -> seems wrong as this is really an audio side implementation) 2) embed copy of drm_audio_component to 'struct hdac_bus', so I could use container_of() on the device handle to get to the bus -> wasted space to keep a copy at hdac_bus level (note: snd-hda-codec-hdmi do this by embedding a copy of ops to "struct hdmi_spec") 3) add another devres entry to store the hdac_bus directly in acomp_init and a new helper function to query it I now implemented option 3 in this RFC series as it seemed cleanest and most local to hdac_component.c, where the problem stems from. It's still somewhat messy, and I'm wondering if I'm overlooking some obvious alternative. We could dig this deeper into i915 specific code, but OTOH, hdac_bus is an argument snd_hdac_acomp_init(), so it's common for all. Kai Vehmanen (2): ALSA: hda - keep track of HDA core bus instance in acomp ALSA: hda/i915 - fix list corruption with concurrent probes include/sound/hda_component.h | 5 +++++ include/sound/hdaudio.h | 2 ++ sound/hda/hdac_component.c | 34 ++++++++++++++++++++++++++++++++++ sound/hda/hdac_i915.c | 16 +++++++++------- 4 files changed, 50 insertions(+), 7 deletions(-) -- 2.28.0

2 5

[PATCH v5 39/52] docs: writing-an-alsa-driver.rst: fix some bad c:func: markups
by Mauro Carvalho Chehab 06 Oct '20

06 Oct '20

Some such markups are invalid, as reported by Sphinx: ./Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3317: WARNING: Unparseable C cross-reference: 'snd_rawmidi_transmit*' Invalid C declaration: Expected end of definition. [error at 20] snd_rawmidi_transmit* --------------------^ ./Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3917: WARNING: Unparseable C cross-reference: 'copy_from/to_user' Invalid C declaration: Expected end of definition. [error at 9] copy_from/to_user ---------^ The first case seems to be better replaced by a literal. For the second one, let's generate cross-references, by spliting it in two. Reviewed-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> --- Documentation/sound/kernel-api/writing-an-alsa-driver.rst | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index 85d6e9c643ef..73bbd59afc33 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -3315,8 +3315,7 @@ data and removes them from the buffer at once: } If you know beforehand how many bytes you can accept, you can use a -buffer size greater than one with the -:c:func:`snd_rawmidi_transmit\*()` functions. +buffer size greater than one with the ``snd_rawmidi_transmit*()`` functions. The ``trigger`` callback must not sleep. If the hardware FIFO is full before the substream buffer has been emptied, you have to continue @@ -3916,7 +3915,7 @@ the maximum size of the proc file access. The read/write callbacks of raw mode are more direct than the text mode. You need to use a low-level I/O functions such as -:c:func:`copy_from/to_user()` to transfer the data. +:c:func:`copy_from_user()` and :c:func:`copy_to_user()` to transfer the data. :: -- 2.26.2

1 0

[PATCH v5 37/52] docs: sound: writing-an-alsa-driver.rst: get rid of :c:type
by Mauro Carvalho Chehab 06 Oct '20

06 Oct '20

the :c:type shouldn't be used with structs with Sphinx 3, as the C domain there uses .. c:struct for structs. As we have the automarkup extension, let's just get rid of all :c:type as a whole, as those will be automagically marked as such. This solves a bunch of warnings with Sphinx 3, like those: .../Documentation/sound/kernel-api/writing-an-alsa-driver.rst:490: WARNING: Unparseable C cross-reference: 'calling snd_card_free' Invalid C declaration: Expected end of definition. [error at 8] calling snd_card_free --------^ .../Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3328: WARNING: Unparseable C cross-reference: 'snd_rawmidi_transmit*' Invalid C declaration: Expected end of definition. [error at 20] snd_rawmidi_transmit* --------------------^ .../Documentation/sound/kernel-api/writing-an-alsa-driver.rst:3928: WARNING: Unparseable C cross-reference: 'copy_from/to_user' Invalid C declaration: Expected end of definition. [error at 9] copy_from/to_user ---------^ Reviewed-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> --- .../kernel-api/writing-an-alsa-driver.rst | 105 ++++++++---------- 1 file changed, 47 insertions(+), 58 deletions(-) diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst index aa9d5ab183d2..85d6e9c643ef 100644 --- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst +++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst @@ -194,7 +194,7 @@ The minimum flow for PCI soundcards is as follows: - create ``remove`` callback. -- create a :c:type:`struct pci_driver <pci_driver>` structure +- create a struct pci_driver structure containing the three pointers above. - create an ``init`` function just calling the @@ -487,7 +487,7 @@ The destructor, remove callback, simply releases the card instance. Then the ALSA middle layer will release all the attached components automatically. -It would be typically just :c:func:`calling snd_card_free()`: +It would be typically just calling :c:func:`snd_card_free()`: :: @@ -560,16 +560,15 @@ return the card instance. The extra_size argument is used to allocate card->private_data for the chip-specific data. Note that these data are allocated by :c:func:`snd_card_new()`. -The first argument, the pointer of struct :c:type:`struct device -<device>`, specifies the parent device. For PCI devices, typically -``&pci->`` is passed there. +The first argument, the pointer of struct device, specifies the parent +device. For PCI devices, typically ``&pci->`` is passed there. Components ---------- After the card is created, you can attach the components (devices) to the card instance. In an ALSA driver, a component is represented as a -:c:type:`struct snd_device <snd_device>` object. A component +struct snd_device object. A component can be a PCM instance, a control interface, a raw MIDI interface, etc. Each such instance has one component entry. @@ -628,7 +627,7 @@ argument of :c:func:`snd_card_new()`, i.e. err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE, sizeof(struct mychip), &card); -:c:type:`struct mychip <mychip>` is the type of the chip record. +struct mychip is the type of the chip record. In return, the allocated record can be accessed as @@ -890,7 +889,7 @@ functions. These resources must be released in the destructor function (see below). Now assume that the PCI device has an I/O port with 8 bytes and an -interrupt. Then :c:type:`struct mychip <mychip>` will have the +interrupt. Then struct mychip will have the following fields: :: @@ -1094,7 +1093,7 @@ PCI Entries ----------- So far, so good. Let's finish the missing PCI stuff. At first, we need a -:c:type:`struct pci_device_id <pci_device_id>` table for +struct pci_device_id table for this chipset. It's a table of PCI vendor/device ID number, and some masks. @@ -1110,19 +1109,17 @@ For example, }; MODULE_DEVICE_TABLE(pci, snd_mychip_ids); -The first and second fields of the :c:type:`struct pci_device_id -<pci_device_id>` structure are the vendor and device IDs. If you -have no reason to filter the matching devices, you can leave the -remaining fields as above. The last field of the :c:type:`struct -pci_device_id <pci_device_id>` struct contains private data -for this entry. You can specify any value here, for example, to define -specific operations for supported device IDs. Such an example is found -in the intel8x0 driver. +The first and second fields of the struct pci_device_id are the vendor +and device IDs. If you have no reason to filter the matching devices, you can +leave the remaining fields as above. The last field of the +struct pci_device_id contains private data for this entry. You can specify +any value here, for example, to define specific operations for supported +device IDs. Such an example is found in the intel8x0 driver. The last entry of this list is the terminator. You must specify this all-zero entry. -Then, prepare the :c:type:`struct pci_driver <pci_driver>` +Then, prepare the struct pci_driver record: :: @@ -1439,8 +1436,8 @@ corresponding argument. If a chip supports multiple playbacks or captures, you can specify more numbers, but they must be handled properly in open/close, etc. callbacks. When you need to know which substream you are referring to, -then it can be obtained from :c:type:`struct snd_pcm_substream -<snd_pcm_substream>` data passed to each callback as follows: +then it can be obtained from struct snd_pcm_substream data passed to each +callback as follows: :: @@ -1639,10 +1636,9 @@ In the sections below, important records are explained. Hardware Description ~~~~~~~~~~~~~~~~~~~~ -The hardware descriptor (:c:type:`struct snd_pcm_hardware -<snd_pcm_hardware>`) contains the definitions of the fundamental -hardware configuration. Above all, you'll need to define this in the -`PCM open callback`_. Note that the runtime instance holds the copy of +The hardware descriptor (struct snd_pcm_hardware) contains the definitions of +the fundamental hardware configuration. Above all, you'll need to define this +in the `PCM open callback`_. Note that the runtime instance holds the copy of the descriptor, not the pointer to the existing descriptor. That is, in the open callback, you can modify the copied descriptor (``runtime->hw``) as you need. For example, if the maximum number of @@ -1800,14 +1796,13 @@ Running Status ~~~~~~~~~~~~~~ The running status can be referred via ``runtime->status``. This is -the pointer to the :c:type:`struct snd_pcm_mmap_status -<snd_pcm_mmap_status>` record. For example, you can get the current +the pointer to the struct snd_pcm_mmap_status record. +For example, you can get the current DMA hardware pointer via ``runtime->status->hw_ptr``. The DMA application pointer can be referred via ``runtime->control``, -which points to the :c:type:`struct snd_pcm_mmap_control -<snd_pcm_mmap_control>` record. However, accessing directly to -this value is not recommended. +which points to the struct snd_pcm_mmap_control record. +However, accessing directly to this value is not recommended. Private Data ~~~~~~~~~~~~ @@ -1843,8 +1838,8 @@ error number such as ``-EINVAL``. To choose an appropriate error number, it is advised to check what value other parts of the kernel return when the same kind of request fails. -The callback function takes at least the argument with :c:type:`struct -snd_pcm_substream <snd_pcm_substream>` pointer. To retrieve the chip +The callback function takes at least the argument with +struct snd_pcm_substream pointer. To retrieve the chip record from the given substream instance, you can use the following macro. @@ -2313,10 +2308,10 @@ non-atomic contexts. For example, the function :c:func:`snd_pcm_period_elapsed()` is called typically from the interrupt handler. But, if you set up the driver to use a threaded interrupt handler, this call can be in non-atomic context, too. In such -a case, you can set ``nonatomic`` filed of :c:type:`struct snd_pcm -<snd_pcm>` object after creating it. When this flag is set, mutex -and rwsem are used internally in the PCM core instead of spin and -rwlocks, so that you can call all PCM functions safely in a non-atomic +a case, you can set ``nonatomic`` filed of struct snd_pcm object +after creating it. When this flag is set, mutex and rwsem are used internally +in the PCM core instead of spin and rwlocks, so that you can call all PCM +functions safely in a non-atomic context. Constraints @@ -2357,8 +2352,7 @@ There are many different constraints. Look at ``sound/pcm.h`` for a complete list. You can even define your own constraint rules. For example, let's suppose my_chip can manage a substream of 1 channel if and only if the format is ``S16_LE``, otherwise it supports any format -specified in the :c:type:`struct snd_pcm_hardware -<snd_pcm_hardware>` structure (or in any other +specified in struct snd_pcm_hardware> (or in any other constraint_list). You can build a rule like this: :: @@ -2467,7 +2461,7 @@ Definition of Controls To create a new control, you need to define the following three callbacks: ``info``, ``get`` and ``put``. Then, define a -:c:type:`struct snd_kcontrol_new <snd_kcontrol_new>` record, such as: +struct snd_kcontrol_new record, such as: :: @@ -2602,8 +2596,8 @@ info callback ~~~~~~~~~~~~~ The ``info`` callback is used to get detailed information on this -control. This must store the values of the given :c:type:`struct -snd_ctl_elem_info <snd_ctl_elem_info>` object. For example, +control. This must store the values of the given +struct snd_ctl_elem_info object. For example, for a boolean control with a single element: :: @@ -2774,13 +2768,11 @@ In the simplest way, you can do like this: if (err < 0) return err; -where ``my_control`` is the :c:type:`struct snd_kcontrol_new -<snd_kcontrol_new>` object defined above, and chip is the object -pointer to be passed to kcontrol->private_data which can be referred -to in callbacks. +where ``my_control`` is the struct snd_kcontrol_new object defined above, +and chip is the object pointer to be passed to kcontrol->private_data which +can be referred to in callbacks. -:c:func:`snd_ctl_new1()` allocates a new :c:type:`struct -snd_kcontrol <snd_kcontrol>` instance, and +:c:func:`snd_ctl_new1()` allocates a new struct snd_kcontrol instance, and :c:func:`snd_ctl_add()` assigns the given control component to the card. @@ -2797,10 +2789,9 @@ can call :c:func:`snd_ctl_notify()`. For example, This function takes the card pointer, the event-mask, and the control id pointer for the notification. The event-mask specifies the types of notification, for example, in the above example, the change of control -values is notified. The id pointer is the pointer of :c:type:`struct -snd_ctl_elem_id <snd_ctl_elem_id>` to be notified. You can -find some examples in ``es1938.c`` or ``es1968.c`` for hardware volume -interrupts. +values is notified. The id pointer is the pointer of struct snd_ctl_elem_id +to be notified. You can find some examples in ``es1938.c`` or ``es1968.c`` +for hardware volume interrupts. Metadata -------- @@ -2915,9 +2906,8 @@ with an ``ac97_bus_ops_t`` record with callback functions. The bus record is shared among all belonging ac97 instances. -And then call :c:func:`snd_ac97_mixer()` with an :c:type:`struct -snd_ac97_template <snd_ac97_template>` record together with -the bus pointer created above. +And then call :c:func:`snd_ac97_mixer()` with an struct snd_ac97_template +record together with the bus pointer created above. :: @@ -3118,11 +3108,10 @@ devices on the card, set ``MPU401_INFO_IRQ_HOOK`` (see Usually, the port address corresponds to the command port and port + 1 corresponds to the data port. If not, you may change the ``cport`` -field of :c:type:`struct snd_mpu401 <snd_mpu401>` manually afterward. -However, :c:type:`struct snd_mpu401 <snd_mpu401>` pointer is +field of struct snd_mpu401 manually afterward. +However, struct snd_mpu401 pointer is not returned explicitly by :c:func:`snd_mpu401_uart_new()`. You -need to cast ``rmidi->private_data`` to :c:type:`struct snd_mpu401 -<snd_mpu401>` explicitly, +need to cast ``rmidi->private_data`` to struct snd_mpu401 explicitly, :: @@ -3772,7 +3761,7 @@ For creating the SG-buffer handler, call :c:func:`snd_pcm_set_managed_buffer_all()` with ``SNDRV_DMA_TYPE_DEV_SG`` in the PCM constructor like other PCI pre-allocator. You need to pass ``&pci->dev``, where pci is -the :c:type:`struct pci_dev <pci_dev>` pointer of the chip as +the struct pci_dev pointer of the chip as well. :: -- 2.26.2

1 0

[PATCH v5 28/52] docs: remove sound API duplication
by Mauro Carvalho Chehab 06 Oct '20

06 Oct '20

The sound API is documented on two different parts: under Documentation/driver-api/sound.rst and under Documentation/sound/kernel-api/alsa-driver-api.rst. The alsa-driver-api.rst seems more complete, and APIs are split per type. There's just one missing kernel-doc markup there. Add it and drop the duplicated one. Reviewed-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> --- Documentation/driver-api/index.rst | 1 - Documentation/driver-api/sound.rst | 54 ------------------- .../sound/kernel-api/alsa-driver-api.rst | 1 + 3 files changed, 1 insertion(+), 55 deletions(-) delete mode 100644 Documentation/driver-api/sound.rst diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 6e7c702e0268..987d6e74ea6a 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -27,7 +27,6 @@ available subsections can be seen below. component message-based infiniband - sound frame-buffer regulator iio/index diff --git a/Documentation/driver-api/sound.rst b/Documentation/driver-api/sound.rst deleted file mode 100644 index afef6eabc073..000000000000 --- a/Documentation/driver-api/sound.rst +++ /dev/null @@ -1,54 +0,0 @@ -Sound Devices -============= - -.. kernel-doc:: include/sound/core.h - :internal: - -.. kernel-doc:: sound/sound_core.c - :export: - -.. kernel-doc:: include/sound/pcm.h - :internal: - -.. kernel-doc:: sound/core/pcm.c - :export: - -.. kernel-doc:: sound/core/device.c - :export: - -.. kernel-doc:: sound/core/info.c - :export: - -.. kernel-doc:: sound/core/rawmidi.c - :export: - -.. kernel-doc:: sound/core/sound.c - :export: - -.. kernel-doc:: sound/core/memory.c - :export: - -.. kernel-doc:: sound/core/pcm_memory.c - :export: - -.. kernel-doc:: sound/core/init.c - :export: - -.. kernel-doc:: sound/core/isadma.c - :export: - -.. kernel-doc:: sound/core/control.c - :export: - -.. kernel-doc:: sound/core/pcm_lib.c - :export: - -.. kernel-doc:: sound/core/hwdep.c - :export: - -.. kernel-doc:: sound/core/pcm_native.c - :export: - -.. kernel-doc:: sound/core/memalloc.c - :export: - diff --git a/Documentation/sound/kernel-api/alsa-driver-api.rst b/Documentation/sound/kernel-api/alsa-driver-api.rst index c8cc651eccf7..d24c64df7069 100644 --- a/Documentation/sound/kernel-api/alsa-driver-api.rst +++ b/Documentation/sound/kernel-api/alsa-driver-api.rst @@ -132,3 +132,4 @@ ISA DMA Helpers Other Helper Macros ------------------- .. kernel-doc:: include/sound/core.h +.. kernel-doc:: sound/sound_core.c -- 2.26.2

1 0

[PATCH] dt-bindings: Another round of adding missing 'additionalProperties'
by Rob Herring 06 Oct '20

06 Oct '20

Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Cc: Thierry Reding <thierry.reding(a)gmail.com> Cc: Linus Walleij <linus.walleij(a)linaro.org> Cc: Stephen Boyd <sboyd(a)kernel.org> Cc: Shawn Guo <shawnguo(a)kernel.org> Cc: Bjorn Andersson <bjorn.andersson(a)linaro.org> Cc: Baolin Wang <baolin.wang7(a)gmail.com> Cc: Guenter Roeck <linux(a)roeck-us.net> Cc: Jonathan Cameron <jic23(a)kernel.org> Cc: Mauro Carvalho Chehab <mchehab(a)kernel.org> Cc: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Cc: Lee Jones <lee.jones(a)linaro.org> Cc: Ulf Hansson <ulf.hansson(a)linaro.org> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Bjorn Helgaas <bhelgaas(a)google.com> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Daniel Lezcano <daniel.lezcano(a)linaro.org> Cc: linux-clk(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linux-spi(a)vger.kernel.org Cc: linux-gpio(a)vger.kernel.org Cc: linux-hwmon(a)vger.kernel.org Cc: linux-iio(a)vger.kernel.org Cc: openipmi-developer(a)lists.sourceforge.net Cc: linux-leds(a)vger.kernel.org Cc: linux-media(a)vger.kernel.org Cc: linux-rockchip(a)lists.infradead.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Cc: linux-mips(a)vger.kernel.org Cc: linux-mmc(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-pci(a)vger.kernel.org Cc: linux-pm(a)vger.kernel.org Cc: linux-remoteproc(a)vger.kernel.org Cc: linux-serial(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Cc: linux-usb(a)vger.kernel.org Signed-off-by: Rob Herring <robh(a)kernel.org> --- I'll take this thru the DT tree. .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 2 ++ .../arm/mediatek/mediatek,pericfg.yaml | 2 ++ .../devicetree/bindings/arm/pmu.yaml | 2 ++ .../devicetree/bindings/arm/primecell.yaml | 3 +++ .../bindings/arm/samsung/sysreg.yaml | 2 ++ .../arm/tegra/nvidia,tegra20-pmc.yaml | 2 ++ .../bindings/bus/mti,mips-cdmm.yaml | 2 ++ .../bus/socionext,uniphier-system-bus.yaml | 7 +++++++ .../bindings/clock/arm,syscon-icst.yaml | 2 ++ .../bindings/clock/idt,versaclock5.yaml | 20 ++++++++++--------- .../bindings/clock/imx6q-clock.yaml | 2 ++ .../bindings/clock/imx6sl-clock.yaml | 2 ++ .../bindings/clock/imx6sll-clock.yaml | 2 ++ .../bindings/clock/imx6sx-clock.yaml | 2 ++ .../bindings/clock/imx6ul-clock.yaml | 2 ++ .../bindings/clock/intel,cgu-lgm.yaml | 2 ++ .../bindings/clock/qcom,gcc-sm8250.yaml | 2 ++ .../bindings/clock/sprd,sc9863a-clk.yaml | 2 ++ .../bindings/clock/ti,am654-ehrpwm-tbclk.yaml | 2 ++ .../bindings/display/bridge/ite,it6505.yaml | 5 +++++ .../bindings/display/bridge/lvds-codec.yaml | 3 +++ .../devicetree/bindings/display/msm/gmu.yaml | 2 ++ .../devicetree/bindings/edac/dmc-520.yaml | 2 ++ .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 2 ++ .../gpio/socionext,uniphier-gpio.yaml | 2 ++ .../bindings/hwmon/adi,axi-fan-control.yaml | 2 ++ .../devicetree/bindings/hwmon/adt7475.yaml | 2 ++ .../bindings/iio/accel/kionix,kxsd9.yaml | 4 ++++ .../bindings/iio/adc/maxim,max1238.yaml | 2 ++ .../bindings/iio/adc/maxim,max1363.yaml | 2 ++ .../bindings/iio/adc/qcom,spmi-vadc.yaml | 4 ++++ .../bindings/iio/adc/samsung,exynos-adc.yaml | 2 ++ .../bindings/iio/adc/ti,ads8688.yaml | 4 ++++ .../bindings/iio/amplifiers/adi,hmc425a.yaml | 2 ++ .../bindings/iio/imu/invensense,icm42600.yaml | 6 ++++++ .../bindings/iio/light/amstaos,tsl2563.yaml | 2 ++ .../bindings/iio/light/dynaimage,al3010.yaml | 2 ++ .../bindings/iio/light/dynaimage,al3320a.yaml | 2 ++ .../bindings/iio/light/sharp,gp2ap002.yaml | 2 ++ .../iio/magnetometer/asahi-kasei,ak8975.yaml | 2 ++ .../iio/proximity/vishay,vcnl3020.yaml | 2 ++ .../interrupt-controller/ingenic,intc.yaml | 2 ++ .../loongson,pch-msi.yaml | 2 ++ .../loongson,pch-pic.yaml | 2 ++ .../devicetree/bindings/ipmi/ipmi-smic.yaml | 2 ++ .../devicetree/bindings/leds/leds-lp55xx.yaml | 8 ++++++++ .../bindings/media/i2c/chrontel,ch7322.yaml | 2 ++ .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 2 ++ .../bindings/media/nxp,imx8mq-vpu.yaml | 2 ++ .../bindings/media/qcom,msm8916-venus.yaml | 2 ++ .../bindings/media/qcom,msm8996-venus.yaml | 2 ++ .../bindings/media/qcom,sc7180-venus.yaml | 2 ++ .../bindings/media/qcom,sdm845-venus-v2.yaml | 2 ++ .../bindings/media/qcom,sdm845-venus.yaml | 2 ++ .../bindings/memory-controllers/fsl/mmdc.yaml | 2 ++ .../memory-controllers/st,stm32-fmc2-ebi.yaml | 2 ++ .../bindings/mfd/gateworks-gsc.yaml | 2 ++ .../bindings/mfd/xylon,logicvc.yaml | 14 +++++++++++-- .../bindings/mips/ingenic/ingenic,cpu.yaml | 6 ++++-- .../bindings/mips/loongson/rs780e-acpi.yaml | 2 ++ .../bindings/mmc/mmc-pwrseq-emmc.yaml | 2 ++ .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 2 ++ .../bindings/mmc/mmc-pwrseq-simple.yaml | 2 ++ .../devicetree/bindings/net/qcom,ipa.yaml | 2 ++ .../bindings/net/realtek-bluetooth.yaml | 4 +++- .../net/wireless/microchip,wilc1000.yaml | 4 ++++ .../devicetree/bindings/pci/rcar-pci-ep.yaml | 2 ++ .../phy/amlogic,meson-g12a-usb2-phy.yaml | 2 ++ .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 2 ++ .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 2 ++ .../bindings/phy/qcom,qusb2-phy.yaml | 1 + .../bindings/phy/qcom-usb-ipq4019-phy.yaml | 2 ++ .../bindings/pinctrl/cirrus,lochnagar.yaml | 2 ++ .../pinctrl/socionext,uniphier-pinctrl.yaml | 2 ++ .../power/amlogic,meson-sec-pwrc.yaml | 2 ++ .../bindings/power/domain-idle-state.yaml | 2 ++ .../bindings/power/mti,mips-cpc.yaml | 2 ++ .../bindings/power/supply/cw2015_battery.yaml | 2 ++ .../bindings/power/supply/rohm,bd99954.yaml | 8 ++++++++ .../bindings/regulator/silergy,sy8827n.yaml | 2 ++ .../bindings/remoteproc/qcom,pil-info.yaml | 2 ++ .../bindings/serial/samsung_uart.yaml | 2 ++ .../serial/socionext,uniphier-uart.yaml | 2 ++ .../devicetree/bindings/serial/sprd-uart.yaml | 2 ++ .../bindings/soc/qcom/qcom,geni-se.yaml | 1 + .../bindings/sound/amlogic,g12a-toacodec.yaml | 2 ++ .../bindings/sound/amlogic,gx-sound-card.yaml | 2 ++ .../bindings/sound/amlogic,t9015.yaml | 2 ++ .../bindings/sound/cirrus,cs42l51.yaml | 2 ++ .../devicetree/bindings/sound/fsl,easrc.yaml | 2 ++ .../bindings/sound/intel,keembay-i2s.yaml | 2 ++ .../bindings/sound/nvidia,tegra186-dspk.yaml | 2 ++ .../sound/nvidia,tegra210-admaif.yaml | 2 ++ .../bindings/sound/nvidia,tegra210-dmic.yaml | 2 ++ .../bindings/sound/nvidia,tegra210-i2s.yaml | 2 ++ .../bindings/sound/rockchip,rk3328-codec.yaml | 2 ++ .../bindings/sound/tlv320adcx140.yaml | 2 ++ .../bindings/thermal/rcar-thermal.yaml | 5 +++++ .../bindings/thermal/sprd-thermal.yaml | 4 ++++ .../bindings/thermal/thermal-idle.yaml | 2 ++ .../bindings/thermal/thermal-zones.yaml | 2 ++ .../devicetree/bindings/timer/cdns,ttc.yaml | 2 ++ .../bindings/usb/nvidia,tegra-xudc.yaml | 2 ++ .../devicetree/bindings/usb/qcom,dwc3.yaml | 2 ++ .../devicetree/bindings/usb/ti,j721e-usb.yaml | 18 +++++++++++++++++ 105 files changed, 285 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 6834f5e8df5f..9fdb319dcf19 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -54,6 +54,8 @@ required: - compatible - mboxes +additionalProperties: false + examples: - | firmware { diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 1af30174b2d0..8723dfe34bab 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | pericfg@10003000 { diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 97df36d301c9..693ef3f185a8 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -93,4 +93,6 @@ properties: required: - compatible +additionalProperties: false + ... diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml index 5aae37f1c563..e15fe00aafb2 100644 --- a/Documentation/devicetree/bindings/arm/primecell.yaml +++ b/Documentation/devicetree/bindings/arm/primecell.yaml @@ -33,4 +33,7 @@ properties: contains: const: apb_pclk additionalItems: true + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml index 3b7811804cb4..2ac789058eee 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml @@ -32,6 +32,8 @@ properties: reg: maxItems: 1 +additionalProperties: false + examples: - | syscon@10010000 { diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index b71a20af5f70..43fd2f8927d0 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -308,6 +308,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + dependencies: "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml index 9cc2d5f1beef..6a7b26b049f1 100644 --- a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml +++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | cdmm@1bde8000 { diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml index a0c6c5d2b70f..49df13fc2f89 100644 --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -57,6 +57,11 @@ properties: "ranges" property should provide a "reasonable" default that is known to work. The software should initialize the bus controller according to it. +patternProperties: + "^.*@[1-5],[1-9a-f][0-9a-f]+$": + description: Devices attached to chip selects + type: object + required: - compatible - reg @@ -64,6 +69,8 @@ required: - "#size-cells" - ranges +additionalProperties: false + examples: - | // In this example, diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml index 444aeea27db8..eb241587efd1 100644 --- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml +++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml @@ -89,6 +89,8 @@ required: - compatible - clocks +additionalProperties: false + examples: - | vco1: clock { diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index 28c6461b9a9a..2ac1131fd922 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -50,6 +50,15 @@ properties: '#clock-cells': const: 1 + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] + clocks: + minItems: 1 + maxItems: 2 + patternProperties: "^OUT[1-4]$": type: object @@ -93,19 +102,12 @@ allOf: maxItems: 1 else: # Devices without builtin crystal - properties: - clock-names: - minItems: 1 - maxItems: 2 - items: - enum: [ xin, clkin ] - clocks: - minItems: 1 - maxItems: 2 required: - clock-names - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clk/versaclock.h> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml index 92a8e545e212..4f4637eddb8b 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml @@ -57,6 +57,8 @@ required: - interrupts - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml index c97bf95b4150..b83c8f43d664 100644 --- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml @@ -33,6 +33,8 @@ required: - interrupts - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml index de48924be191..484894a4b23f 100644 --- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml @@ -49,6 +49,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml index e50cddee43c3..e6c795657c24 100644 --- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml @@ -53,6 +53,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml index 36ce7667c972..6a51a3f51cd9 100644 --- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml @@ -49,6 +49,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml index 6dc1414bfb7f..f3e1a700a2ca 100644 --- a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml +++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml @@ -33,6 +33,8 @@ required: - reg - '#clock-cells' +additionalProperties: false + examples: - | cgu: clock-controller@e0200000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml index a5766ff89082..80bd6caf5bc9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,rpmh.h> diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml index c6d091518650..4069e09cb62d 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml @@ -73,6 +73,8 @@ else: The 'reg' property for the clock node is also required if there is a sub range of registers for the clocks. +additionalProperties: false + examples: - | ap_clk: clock-controller@21500000 { diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 869b18ac88d7..6b419a9878f3 100644 --- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -26,6 +26,8 @@ required: - "#clock-cells" - reg +additionalProperties: false + examples: - | ehrpwm_tbclk: syscon@4140 { diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index 2c500166c65d..efbb3d0117dc 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -31,6 +31,9 @@ properties: compatible: const: ite,it6505 + reg: + maxItems: 1 + ovdd-supply: maxItems: 1 description: I/O voltage @@ -63,6 +66,8 @@ required: - reset-gpios - extcon +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 68951d56ebba..e8fa8e901c9f 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -83,6 +83,9 @@ required: - compatible - ports +additionalProperties: false + + examples: - | lvds-encoder { diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 53056dd02597..fe55611d2603 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -89,6 +89,8 @@ required: - iommus - operating-points-v2 +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gpucc-sdm845.h> diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml index 9272d2bd8634..3b6842e92d1b 100644 --- a/Documentation/devicetree/bindings/edac/dmc-520.yaml +++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml @@ -49,6 +49,8 @@ required: - interrupts - interrupt-names +additionalProperties: false + examples: - | dmc0: dmc@200000 { diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml index b26d4b4be743..e2ca0b000471 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | fsi2spi@1c00 { diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml index c58ff9a94f45..1a54db04f29d 100644 --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -64,6 +64,8 @@ required: - gpio-ranges - socionext,interrupt-ranges +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 7898b9dba5a5..6747b870f297 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -44,6 +44,8 @@ required: - interrupts - pulses-per-revolution +additionalProperties: false + examples: - | fpga_axi: fpga-axi { diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index dfa821c0aacc..ad0ec9f35bd8 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -65,6 +65,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml index d61ab4fa3d71..390b87242fcb 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -29,10 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | # include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml index cccd3033a55b..50bcd72ac9d6 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml @@ -62,6 +62,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml index 48377549c39a..e04f09f35601 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml @@ -36,6 +36,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 0ca992465a21..7f4f827c57a7 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -48,6 +48,8 @@ properties: description: End of conversion interrupt. + io-channel-ranges: true + required: - compatible - reg @@ -232,6 +234,8 @@ allOf: enum: [ 1, 2, 4, 8, 16 ] default: 1 +additionalProperties: false + examples: - | spmi_bus { diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index cc3c8ea6a894..16d76482b4ff 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -107,6 +107,8 @@ allOf: items: - const: adc +additionalProperties: false + examples: - | adc: adc@12d10000 { diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml index 97fe6cbb2efa..a0af4b24877f 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -25,10 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. + spi-max-frequency: true + required: - compatible - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 5342360e96b1..a557761d8016 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -33,6 +33,8 @@ required: - compatible - ctrl-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index abd8d25e1136..4c1c083d0e92 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -47,11 +47,17 @@ properties: vddio-supply: description: Regulator that provides power to the bus + spi-max-frequency: true + spi-cpha: true + spi-cpol: true + required: - compatible - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml index e201a06d8fdc..60e76bc035a5 100644 --- a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml index f671edda6641..a3a979553e32 100644 --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml index 497300239d93..8249be99cff9 100644 --- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml +++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml index 12aa16f24772..f8a932be0d10 100644 --- a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -61,6 +61,8 @@ required: - sharp,proximity-far-hysteresis - sharp,proximity-close-hysteresis +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index f0b336ac39c9..a25590a16ba7 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -55,6 +55,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml index 51dba64037f6..fbd3a2e32280 100644 --- a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml index 02a3cf470518..0a046be8d1cd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -49,6 +49,8 @@ required: - "#interrupt-cells" - interrupt-controller +additionalProperties: false + examples: - | intc: interrupt-controller@10001000 { diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml index 1b256d9dd92a..1f6fd73d4624 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml @@ -46,6 +46,8 @@ required: - loongson,msi-base-vec - loongson,msi-num-vecs +additionalProperties: true #fixme + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml index a6dcbb2971a9..fdd6a38a31db 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml @@ -41,6 +41,8 @@ required: - interrupt-controller - '#interrupt-cells' +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml index 58fa76ee6176..898e3267893a 100644 --- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml @@ -49,6 +49,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | smic@fff3a000 { diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml index b1bb3feb0f4d..cd877e817ad1 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -58,6 +58,12 @@ properties: - 2 # D1~6 with VOUT, D7~9 with VDD - 3 # D1~9 are connected to VOUT + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + patternProperties: "(^led@[0-9a-f]$|led)": type: object @@ -98,6 +104,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/leds/common.h> diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml index daa2869377c5..63e5b89d2e0b 100644 --- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml @@ -49,6 +49,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml index 107c862a7fc7..3dc06c628e64 100644 --- a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -119,6 +119,8 @@ required: - reg - port +additionalProperties: false + examples: - | i2c@e66d8000 { diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml index a2d1cd77c1e2..762be3f96ce9 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml @@ -55,6 +55,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx8mq-clock.h> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml index f9606df02d70..59ab16ad12f1 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml @@ -92,6 +92,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml index fa0dc6c47f1d..199f45217b4a 100644 --- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml @@ -119,6 +119,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml index 55f2d67ae34e..3cec6dae1139 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml @@ -108,6 +108,8 @@ required: - video-decoder - video-encoder +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index 157dff8057e9..55f5d439fa61 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -103,6 +103,8 @@ required: - video-core0 - video-core1 +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml index 084e45e2df62..680f37726fdf 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml @@ -120,6 +120,8 @@ required: - video-core0 - video-core1 +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml index 68484136a510..71547eee9919 100644 --- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml @@ -33,6 +33,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx6qdl-clock.h> diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml index 70eaf739036b..cba74205846a 100644 --- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml @@ -194,6 +194,8 @@ required: - clocks - ranges +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml index 9b6eb50606e8..95e47f317ed2 100644 --- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml @@ -144,6 +144,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml index abc9937506e0..8a1a6625c782 100644 --- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml +++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml @@ -26,6 +26,12 @@ properties: reg: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + select: properties: compatible: @@ -36,15 +42,19 @@ select: required: - compatible +patternProperties: + "^gpio@[0-9a-f]+$": + $ref: /schemas/gpio/xylon,logicvc-gpio.yaml# + required: - compatible - reg +additionalProperties: false + examples: - | logicvc: logicvc@43c00000 { compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; reg = <0x43c00000 0x6000>; - #address-cells = <1>; - #size-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml index 16fa03d65ad5..6df1a9470d8f 100644 --- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml +++ b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml @@ -32,12 +32,16 @@ properties: clocks: maxItems: 1 + device_type: true + required: - device_type - compatible - reg - clocks +additionalProperties: false + examples: - | #include <dt-bindings/clock/jz4780-cgu.h> @@ -52,7 +56,6 @@ examples: reg = <0>; clocks = <&cgu JZ4780_CLK_CPU>; - clock-names = "cpu"; }; cpu1: cpu@1 { @@ -61,7 +64,6 @@ examples: reg = <1>; clocks = <&cgu JZ4780_CLK_CORE1>; - clock-names = "cpu"; }; }; ... diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml index d317897e1115..7c0f9022202c 100644 --- a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml @@ -23,6 +23,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | isa@0 { diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml index 77f746f57284..1fc7e620f328 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml @@ -36,6 +36,8 @@ required: - compatible - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml index a68820d31d50..e0169a285aa2 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml @@ -28,6 +28,8 @@ required: - powerdown-gpios - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml index 449215444723..06bbd8590544 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml @@ -50,6 +50,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 8594f114f016..4d8464b2676d 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -144,6 +144,8 @@ oneOf: - required: - memory-region +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml index c488f24ed38f..4f485df69ac3 100644 --- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml @@ -37,6 +37,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> @@ -49,6 +51,6 @@ examples: bluetooth { compatible = "realtek,rtl8723bs-bt"; device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ - host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml index 2c320eb2a8c4..6c35682377e6 100644 --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -18,6 +18,8 @@ properties: compatible: const: microchip,wilc1000 + reg: true + spi-max-frequency: true interrupts: @@ -34,6 +36,8 @@ required: - compatible - interrupts +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml index aa483c7f27fd..53d5952b7e57 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml @@ -55,6 +55,8 @@ required: - clock-names - max-functions +additionalProperties: false + examples: - | #include <dt-bindings/clock/r8a774c0-cpg-mssr.h> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml index 0d2557bb0bcc..399ebde45409 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml @@ -63,6 +63,8 @@ then: required: - power-domains +additionalProperties: false + examples: - | phy@36000 { diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml index 23887ebe08fd..17f132ce5516 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml @@ -42,6 +42,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml index fa30c24b4405..17fd7f6b83bb 100644 --- a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml @@ -60,6 +60,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq806x.h> diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index ccda92859eca..d457fb6a4779 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -158,6 +158,7 @@ required: - vdda-phy-dpdm-supply - resets +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml index 1118fe69b611..3e7191b168fb 100644 --- a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml @@ -36,6 +36,8 @@ required: - reset-names - "#phy-cells" +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-ipq4019.h> diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml index 420d74856032..a07dd197176a 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml @@ -188,3 +188,5 @@ required: - gpio-ranges - pinctrl-0 - pinctrl-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index f8a93d8680f9..502480a19f49 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -28,6 +28,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml index bc4e037f3f73..5dae04d2936c 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -27,6 +27,8 @@ required: - compatible - "#power-domain-cells" +additionalProperties: false + examples: - | secure-monitor { diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml index dfba1af9abe5..6a12efdf436a 100644 --- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml @@ -50,6 +50,8 @@ patternProperties: - exit-latency-us - min-residency-us +additionalProperties: false + examples: - | diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml index ccdeaece169e..be447ccfdcb8 100644 --- a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml @@ -26,6 +26,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | cpc@1bde0000 { diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml index 2036977ecc2f..ee92e6a076ac 100644 --- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -52,6 +52,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml index 7e0f73a898c7..9852d2febf65 100644 --- a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml @@ -112,6 +112,12 @@ properties: # threshold, and the current is below this setting (7 in above chart) # See also Documentation/devicetree/bindings/power/supply/battery.txt + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + monitored-battery: description: phandle of battery characteristics devicetree node @@ -137,6 +143,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml index 15983cdc7c28..b222adabc7b4 100644 --- a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml @@ -31,6 +31,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml index 87c52316ddbd..9282837d64ba 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml @@ -25,6 +25,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | imem@146bf000 { diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 96414ac65d06..21ee627b2ced 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -68,6 +68,8 @@ required: - interrupts - reg +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml index 09a30300850c..d490c7c4b967 100644 --- a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml @@ -32,6 +32,8 @@ required: - interrupts - clocks +additionalProperties: false + examples: - | aliases { diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index e66b2e92a7fc..09f6283f3cae 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -56,6 +56,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml index bd04fdb57414..84671950ca0d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -173,6 +173,7 @@ patternProperties: - compatible - interrupts +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml index b4b3828c40af..3c3891d17238 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml @@ -37,6 +37,8 @@ required: - reg - resets +additionalProperties: false + examples: - | #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml index fb374c659be1..db61f0731a20 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml @@ -84,6 +84,8 @@ required: - model - dai-link-0 +additionalProperties: false + examples: - | sound { diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml index 04014e658c90..c7613ea728d4 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -42,6 +42,8 @@ required: - clock-names - resets +additionalProperties: false + examples: - | #include <dt-bindings/clock/g12a-clkc.h> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml index 5bcb643c288f..0d87e2c86a42 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml @@ -46,6 +46,8 @@ required: - reg - "#sound-dai-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml index 32d547af9ce7..bdde68a1059c 100644 --- a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml @@ -74,6 +74,8 @@ required: - fsl,asrc-rate - fsl,asrc-format +additionalProperties: false + examples: - | #include <dt-bindings/clock/imx8mn-clock.h> diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index 2e0bbc1c868a..6cbdd8857ea2 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -52,6 +52,8 @@ required: - clock-names - interrupts +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index 2f2fcffa65cb..ed2fb32fcdd4 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -64,6 +64,8 @@ required: - assigned-clock-parents - sound-name-prefix +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra186-clock.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index 41c77f45d2fd..c028b259e822 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -81,6 +81,8 @@ required: - dmas - dma-names +additionalProperties: false + examples: - | admaif@702d0000 { diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 8689d9f18c11..2a3207b550e7 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -64,6 +64,8 @@ required: - assigned-clocks - assigned-clock-parents +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 9bbf18153d63..dfc1bf7b7722 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -82,6 +82,8 @@ required: - assigned-clocks - assigned-clock-parents +additionalProperties: false + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml index 5b85ad5e4834..75b3b33b5f1f 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -53,6 +53,8 @@ required: - rockchip,grf - "#sound-dai-cells" +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index f578f17f3e04..1bff53d37118 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -138,6 +138,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 0994693d240f..7e9557ac0e4a 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -59,6 +59,9 @@ properties: resets: maxItems: 1 + "#thermal-sensor-cells": + const: 0 + if: properties: compatible: @@ -79,6 +82,8 @@ else: - power-domains - resets +additionalProperties: false + examples: # Example (non interrupt support) - | diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml index af2ff930646a..6d65a3cf2af2 100644 --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml @@ -68,6 +68,8 @@ patternProperties: - nvmem-cells - nvmem-cell-names + additionalProperties: false + required: - compatible - reg @@ -79,6 +81,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | ap_thm0: thermal@32200000 { diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index a832d427e9d5..6278ccf16f3f 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -44,6 +44,8 @@ properties: required: - '#cooling-cells' +additionalProperties: false + examples: - | #include <dt-bindings/thermal/thermal.h> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 3ec9cc87ec50..164f71598c59 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -218,6 +218,8 @@ patternProperties: - trips additionalProperties: false +additionalProperties: false + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index c532b60b9c63..8615353f69b4 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -36,6 +36,8 @@ required: - interrupts - clocks +additionalProperties: false + examples: - | ttc0: ttc0@f8001000 { diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index 196589c93373..e60e590dbe12 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -155,6 +155,8 @@ allOf: clock-names: maxItems: 4 +additionalProperties: false + examples: - | #include <dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index dac10848dd7f..2cf525d21e05 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -121,6 +121,8 @@ required: - interrupts - interrupt-names +additionalProperties: false + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 484fc1091d7c..388245b91a55 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -46,6 +46,22 @@ properties: VBUS pin of the SoC via a 1/3 voltage divider. type: boolean + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + +patternProperties: + "^usb@": + type: object + required: - compatible - reg @@ -53,6 +69,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> -- 2.25.1

12 12

[PATCH] sound: sparc: dbri: fix repeated word 'the'
by Randy Dunlap 05 Oct '20

05 Oct '20

Drop the duplicated word "the". Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org --- sound/sparc/dbri.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- lnx-59-rc8.orig/sound/sparc/dbri.c +++ lnx-59-rc8/sound/sparc/dbri.c @@ -620,7 +620,7 @@ A circular command buffer is used here. while another can be executed. The scheme works by adding two WAIT commands after each sent batch of commands. When the next batch is prepared it is added after the WAIT commands then the WAITs are replaced with single JUMP -command to the new batch. The the DBRI is forced to reread the last WAIT +command to the new batch. The DBRI is forced to reread the last WAIT command (replaced by the JUMP by then). If the DBRI is still executing previous commands the request to reread the WAIT command is ignored.

2 2

[PATCH 1/4] ASoC: Intel: bdw-rt5650: Mark FE DAIs as nonatomic
by Cezary Rojewski 05 Oct '20

05 Oct '20

PCM operations for DAI links connected with DSP platform component involve communication with DSP firmware by IPCs. As IPC protocol may cause thread to sleep while waiting for a response from DSP, propagate that information to ALSA core by marking all FE DAIs as nonatomic. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> --- sound/soc/intel/boards/bdw-rt5650.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/boards/bdw-rt5650.c b/sound/soc/intel/boards/bdw-rt5650.c index c44315af6a4c..aa420b201848 100644 --- a/sound/soc/intel/boards/bdw-rt5650.c +++ b/sound/soc/intel/boards/bdw-rt5650.c @@ -232,6 +232,7 @@ static struct snd_soc_dai_link bdw_rt5650_dais[] = { { .name = "System PCM", .stream_name = "System Playback", + .nonatomic = 1, .dynamic = 1, .ops = &bdw_rt5650_fe_ops, .trigger = { -- 2.17.1

3 5