January 2020 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v2] asoc: sti: fix possible sleep-in-atomic
by Arnaud Pouliquen 13 Jan '20

13 Jan '20

Change mutex and spinlock management to avoid sleep in atomic issue. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> --- V1 to V2 suppress unexpected [INTERNAL REVIEW] tag in subject sound/soc/sti/uniperif_player.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index 48ea915b24ba..2ed92c990b97 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -226,7 +226,6 @@ static void uni_player_set_channel_status(struct uniperif *player, * sampling frequency. If no sample rate is already specified, then * set one. */ - mutex_lock(&player->ctrl_lock); if (runtime) { switch (runtime->rate) { case 22050: @@ -303,7 +302,6 @@ static void uni_player_set_channel_status(struct uniperif *player, player->stream_settings.iec958.status[3 + (n * 4)] << 24; SET_UNIPERIF_CHANNEL_STA_REGN(player, n, status); } - mutex_unlock(&player->ctrl_lock); /* Update the channel status */ if (player->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0) @@ -365,8 +363,10 @@ static int uni_player_prepare_iec958(struct uniperif *player, SET_UNIPERIF_CTRL_ZERO_STUFF_HW(player); + mutex_lock(&player->ctrl_lock); /* Update the channel status */ uni_player_set_channel_status(player, runtime); + mutex_unlock(&player->ctrl_lock); /* Clear the user validity user bits */ SET_UNIPERIF_USER_VALIDITY_VALIDITY_LR(player, 0); @@ -598,7 +598,6 @@ static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, iec958->status[1] = ucontrol->value.iec958.status[1]; iec958->status[2] = ucontrol->value.iec958.status[2]; iec958->status[3] = ucontrol->value.iec958.status[3]; - mutex_unlock(&player->ctrl_lock); spin_lock_irqsave(&player->irq_lock, flags); if (player->substream && player->substream->runtime) @@ -608,6 +607,8 @@ static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, uni_player_set_channel_status(player, NULL); spin_unlock_irqrestore(&player->irq_lock, flags); + mutex_unlock(&player->ctrl_lock); + return 0; } -- 2.17.1

1 0

[alsa-devel] [PATCH v3] ALSA: usb-audio: Add boot quirk for MOTU M Series
by Alexander Tsoy 13 Jan '20

13 Jan '20

Add delay to make sure that audio urbs are not sent too early. Otherwise the device hangs. Windows driver makes ~2s delay, so use about the same time delay value. snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which is an overkill. Thus a quirk that is called only once is implemented. Also send two vendor-specific control messages before and after the delay. This behaviour is blindly copied from the Windows driver. Signed-off-by: Alexander Tsoy <alexander(a)tsoy.me> --- v3 changes: fixed identations once more sound/usb/card.c | 4 ++++ sound/usb/quirks.c | 38 ++++++++++++++++++++++++++++++++++++++ sound/usb/quirks.h | 5 +++++ 3 files changed, 47 insertions(+) diff --git a/sound/usb/card.c b/sound/usb/card.c index 9f743ebae615..2f582ac7cf78 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -600,6 +600,10 @@ static int usb_audio_probe(struct usb_interface *intf, } } if (! chip) { + err = snd_usb_apply_boot_quirk_once(dev, intf, quirk, id); + if (err < 0) + return err; + /* it's a fresh one. * now look for an empty slot and create a new card instance */ diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 82184036437b..0464df785f2e 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1113,6 +1113,31 @@ static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev) return err; } +static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev) +{ + int ret; + + if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0))) + return -EINVAL; + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0, 0, NULL, 0, 1000); + + if (ret < 0) + return ret; + + msleep(2000); + + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x20, 0, NULL, 0, 1000); + + if (ret < 0) + return ret; + + return 0; +} + /* * Setup quirks */ @@ -1297,6 +1322,19 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, return 0; } +int snd_usb_apply_boot_quirk_once(struct usb_device *dev, + struct usb_interface *intf, + const struct snd_usb_audio_quirk *quirk, + unsigned int id) +{ + switch (id) { + case USB_ID(0x07fd, 0x0008): /* MOTU M Series */ + return snd_usb_motu_m_series_boot_quirk(dev); + } + + return 0; +} + /* * check if the device uses big-endian samples */ diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h index a80e0ddd0736..df0355843a4c 100644 --- a/sound/usb/quirks.h +++ b/sound/usb/quirks.h @@ -20,6 +20,11 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, const struct snd_usb_audio_quirk *quirk, unsigned int usb_id); +int snd_usb_apply_boot_quirk_once(struct usb_device *dev, + struct usb_interface *intf, + const struct snd_usb_audio_quirk *quirk, + unsigned int usb_id); + void snd_usb_set_format_quirk(struct snd_usb_substream *subs, struct audioformat *fmt); -- 2.24.1

2 1

[alsa-devel] [PATCH 0/3] ALSA: dice: add support for Alesis MasterControl
by Takashi Sakamoto 13 Jan '20

13 Jan '20

Hi, This patchset includes some fixes to support Alesis MasterControl. Like Alesis iO 14/26, MasterControl supports two ports for tx isoc communication (PCM/MIDI capture) and one port for rx isoc communication (PCM/MIDI playback) as well. Takashi Sakamoto (3): dice: fix fallback from protocol extension into limited functionality dice: loosen stream format check for MIDI conformant data channel dice: add support for Alesis MasterControl sound/firewire/dice/dice-alesis.c | 24 ++++++++++++++++++++++++ sound/firewire/dice/dice-extension.c | 5 ++++- sound/firewire/dice/dice-stream.c | 9 +++------ sound/firewire/dice/dice.c | 8 ++++++++ sound/firewire/dice/dice.h | 1 + 5 files changed, 40 insertions(+), 7 deletions(-) -- 2.20.1

2 6

[alsa-devel] [PATCH 0/3] ALSA: oxfw: fixes for Stanton SCS.1d
by Takashi Sakamoto 13 Jan '20

13 Jan '20

Hi, ALSA oxfw driver includes functionality of former snd-scs1x implements. However, since it was merged in Linux v4.5, the driver can't add sound card instance for Stanton SCS.1d due to its quirk. This patchset fixes the regression. Takashi Sakamoto (3): ALSA: oxfw: use ENXIO for not-supported cases ALSA: oxfw: don't add MIDI/PCM interface when packet streaming is unavailable ALSA: oxfw: fix for Stanton SCS.1d sound/firewire/oxfw/oxfw-command.c | 6 +-- sound/firewire/oxfw/oxfw-stream.c | 82 +++++++++++++++++------------- sound/firewire/oxfw/oxfw.c | 39 +++++++------- sound/firewire/oxfw/oxfw.h | 1 + 4 files changed, 74 insertions(+), 54 deletions(-) -- 2.20.1

2 6

[alsa-devel] [PATCH] ALSA: firewire-tascam: fix corruption due to spin lock without restoration in SoftIRQ context
by Takashi Sakamoto 13 Jan '20

13 Jan '20

ALSA firewire-tascam driver can bring corruption due to spin lock without restoration of IRQ flag in SoftIRQ context. This commit fixes the bug. Cc: Scott Bahling <sbahling(a)suse.com> Cc: <stable(a)vger.kernel.org> # v4.21 Fixes: d7167422433c ("ALSA: firewire-tascam: queue events for change of control surface") Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/tascam/amdtp-tascam.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/firewire/tascam/amdtp-tascam.c b/sound/firewire/tascam/amdtp-tascam.c index e80bb84c43f6..f823a2ab3544 100644 --- a/sound/firewire/tascam/amdtp-tascam.c +++ b/sound/firewire/tascam/amdtp-tascam.c @@ -157,14 +157,15 @@ static void read_status_messages(struct amdtp_stream *s, if ((before ^ after) & mask) { struct snd_firewire_tascam_change *entry = &tscm->queue[tscm->push_pos]; + unsigned long flag; - spin_lock_irq(&tscm->lock); + spin_lock_irqsave(&tscm->lock, flag); entry->index = index; entry->before = before; entry->after = after; if (++tscm->push_pos >= SND_TSCM_QUEUE_COUNT) tscm->push_pos = 0; - spin_unlock_irq(&tscm->lock); + spin_unlock_irqrestore(&tscm->lock, flag); wake_up(&tscm->hwdep_wait); } -- 2.20.1

2 1

[alsa-devel] Quote strings containing [ or ] when saving an alsa config
by GitHub pull_request - opened 13 Jan '20

13 Jan '20

alsa-project/alsa-lib pull request #23 was opened from Bertware: This pull request will fix issue #22. When saving the configuration for a control, values containing square brackets should be quoted. Please review and test as this code hasn't been tested yet. Note: does the '+' character also need quotes? If so, now might be a good time to add it to this list. Request URL : https://github.com/alsa-project/alsa-lib/pull/23 Patch URL : https://github.com/alsa-project/alsa-lib/pull/23.patch Repository URL: https://github.com/alsa-project/alsa-lib

1 0

[alsa-devel] [PATCH] ALSA: cmipci: Fix possible a data race in snd_cmipci_interrupt()
by Jia-Ju Bai 13 Jan '20

13 Jan '20

The functions snd_cmipci_interrupt() and snd_cmipci_capture_trigger() may be concurrently executed. The function snd_cmipci_capture_trigger() calls snd_cmipci_pcm_trigger(). In snd_cmipci_pcm_trigger(), the variable rec->running is written with holding a spinlock cm->reg_lock. But in snd_cmipci_interrupt(), the identical variable cm->channel[0].running or cm->channel[1].running is read without holding this spinlock. Thus, a possible data race may occur. To fix this data race, in snd_cmipci_interrupt(), the variables cm->channel[0].running and cm->channel[1].running are read with holding the spinlock cm->reg_lock. This data race is found by the runtime testing of our tool DILP-2. Signed-off-by: Jia-Ju Bai <baijiaju1990(a)gmail.com> --- sound/pci/cmipci.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index dd9d62e2b633..f791152ec48f 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -1430,7 +1430,7 @@ static int snd_cmipci_capture_spdif_hw_free(struct snd_pcm_substream *subs) static irqreturn_t snd_cmipci_interrupt(int irq, void *dev_id) { struct cmipci *cm = dev_id; - unsigned int status, mask = 0; + unsigned int run_flag0, run_flag1, status, mask = 0; /* fastpath out, to ease interrupt sharing */ status = snd_cmipci_read(cm, CM_REG_INT_STATUS); @@ -1445,15 +1445,17 @@ static irqreturn_t snd_cmipci_interrupt(int irq, void *dev_id) mask |= CM_CH1_INT_EN; snd_cmipci_clear_bit(cm, CM_REG_INT_HLDCLR, mask); snd_cmipci_set_bit(cm, CM_REG_INT_HLDCLR, mask); + run_flag0 = cm->channel[0].running; + run_flag1 = cm->channel[1].running; spin_unlock(&cm->reg_lock); if (cm->rmidi && (status & CM_UARTINT)) snd_mpu401_uart_interrupt(irq, cm->rmidi->private_data); if (cm->pcm) { - if ((status & CM_CHINT0) && cm->channel[0].running) + if ((status & CM_CHINT0) && run_flag0) snd_pcm_period_elapsed(cm->channel[0].substream); - if ((status & CM_CHINT1) && cm->channel[1].running) + if ((status & CM_CHINT1) && run_flag1) snd_pcm_period_elapsed(cm->channel[1].substream); } return IRQ_HANDLED; -- 2.17.1

2 3

[alsa-devel] [PATCH 0/6] soundwire: stream: fix state machines and transitions
by Pierre-Louis Bossart 13 Jan '20

13 Jan '20

The existing stream support works fine with simple cases, but does not map well with ALSA transitions for underflows/resume where prepare() can be called multiple times. Concurrency with multiple devices per links or multiple streams enabled on the same link also needs to be fixed. These patches are the result of hours of validation on the Intel side and should benefit other implementations since there is nothing hardware-specific. The Intel-specific changes being reviewed do depend on those stream changes though to be functional. Bard Liao (1): soundwire: stream: only prepare stream when it is configured. Pierre-Louis Bossart (3): soundwire: stream: remove redundant pr_err traces soundwire: stream: update state machine and add state checks soundwire: stream: do not update parameters during DISABLED-PREPARED transition Rander Wang (2): soundwire: stream: fix support for multiple Slaves on the same link soundwire: stream: don't program ports for a stream that has not been prepared Documentation/driver-api/soundwire/stream.rst | 63 ++++++++---- drivers/soundwire/stream.c | 97 +++++++++++++++---- 2 files changed, 124 insertions(+), 36 deletions(-) base-commit: 09f6a72d014386939d21899921dd379006471a4b -- 2.20.1

2 15

[alsa-devel] [PATCH v2] ALSA: usb-audio: Add support for Presonus Studio 1810c
by mickflemm＠gmail.com 12 Jan '20

12 Jan '20

This patch adds support for Presonus Studio 1810c, a usb interface that's UAC2 compliant with a few quirks and a few extra hw-specific controls. I've tested all 3 altsettings and the added switch controls and they work as expected. More infos on the card: https://www.presonus.com/products/Studio-1810c Note that this work is based on packet inspection with usbmon. I just wanted to get this card to work for using it on our open-source radio station: https://github.com/UoC-Radio v2 address issues reported by Takashi: * Properly get/set enum type controls * Prevent race condition on switch_get/set * Various control naming changes * Various coding style fixes Signed-off-by: Nick Kossifidis <mickflemm(a)gmail.com> --- sound/usb/Makefile | 1 + sound/usb/format.c | 17 ++ sound/usb/mixer_quirks.c | 5 + sound/usb/mixer_s1810c.c | 595 +++++++++++++++++++++++++++++++++++++++ sound/usb/mixer_s1810c.h | 7 + sound/usb/quirks.c | 36 +++ 6 files changed, 661 insertions(+) create mode 100644 sound/usb/mixer_s1810c.c create mode 100644 sound/usb/mixer_s1810c.h diff --git a/sound/usb/Makefile b/sound/usb/Makefile index 78edd7d2f..56031026b 100644 --- a/sound/usb/Makefile +++ b/sound/usb/Makefile @@ -13,6 +13,7 @@ snd-usb-audio-objs := card.o \ mixer_scarlett.o \ mixer_scarlett_gen2.o \ mixer_us16x08.o \ + mixer_s1810c.o \ pcm.o \ power.o \ proc.o \ diff --git a/sound/usb/format.c b/sound/usb/format.c index d79db7130..edf3f2a55 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -262,6 +262,23 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip, } for (rate = min; rate <= max; rate += res) { + + /* + * Presonus Studio 1810c anounces invalid + * sampling rates for its streams. + */ + if (chip->usb_id == USB_ID(0x0194f, 0x010c) && + ((rate > 48000 && fp->altsetting == 1) || + ((rate < 88200 || rate > 96000) + && fp->altsetting == 2) || + ((rate < 176400 || rate > 192000) + && fp->altsetting == 3))) { + if (res) + continue; + else + break; + } + if (fp->rate_table) fp->rate_table[nr_rates] = rate; if (!fp->rate_min || rate < fp->rate_min) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 39e27ae6c..71e705fab 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -34,6 +34,7 @@ #include "mixer_scarlett.h" #include "mixer_scarlett_gen2.h" #include "mixer_us16x08.h" +#include "mixer_s1810c.h" #include "helper.h" struct std_mono_table { @@ -2277,6 +2278,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x2a39, 0x3fd4): /* RME */ err = snd_rme_controls_create(mixer); break; + + case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */ + err = snd_sc1810_init_mixer(mixer); + break; } return err; diff --git a/sound/usb/mixer_s1810c.c b/sound/usb/mixer_s1810c.c new file mode 100644 index 000000000..ae3929e1c --- /dev/null +++ b/sound/usb/mixer_s1810c.c @@ -0,0 +1,595 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Presonus Studio 1810c driver for ALSA + * Copyright (C) 2019 Nick Kossifidis <mickflemm(a)gmail.com> + * + * Based on reverse engineering of the communication protocol + * between the windows driver / Univeral Control (UC) program + * and the device, through usbmon. + * + * For now this bypasses the mixer, with all channels split, + * so that the software can mix with greater flexibility. + * It also adds controls for the 4 buttons on the front of + * the device. + */ + +#include <linux/usb.h> +#include <linux/usb/audio-v2.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/control.h> + +#include "usbaudio.h" +#include "mixer.h" +#include "mixer_quirks.h" +#include "helper.h" + +#define SC1810C_CMD_REQ 160 +#define SC1810C_CMD_REQTYPE \ + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT) +#define SC1810C_CMD_F1 0x50617269 +#define SC1810C_CMD_F2 0x14 + +/* + * DISCLAIMER: These are just guesses based on the + * dumps I got. + * + * It seems like a selects between + * device (0), mixer (0x64) and output (0x65) + * + * For mixer (0x64): + * * b selects an input channel (see below). + * * c selects an output channel pair (see below). + * * d selects left (0) or right (1) of that pair. + * * e 0-> disconnect, 0x01000000-> connect, + * 0x0109-> used for stereo-linking channels, + * e is also used for setting volume levels + * in which case b is also set so I guess + * this way it is possible to set the volume + * level from the specified input to the + * specified output. + * + * IN Channels: + * 0 - 7 Mic/Inst/Line (Analog inputs) + * 8 - 9 S/PDIF + * 10 - 17 ADAT + * 18 - 35 DAW (Inputs from the host) + * + * OUT Channels (pairs): + * 0 -> Main out + * 1 -> Line1/2 + * 2 -> Line3/4 + * 3 -> S/PDIF + * 4 -> ADAT? + * + * For device (0): + * * b and c are not used, at least not on the + * dumps I got. + * * d sets the control id to be modified + * (see below). + * * e sets the setting for that control. + * (so for the switches I was interested + * in it's 0/1) + * + * For output (0x65): + * * b is the output channel (see above). + * * c is zero. + * * e I guess the same as with mixer except 0x0109 + * which I didn't see in my dumps. + * + * The two fixed fields have the same values for + * mixer and output but a different set for device. + */ +struct s1810c_ctl_packet { + u32 a; + u32 b; + u32 fixed1; + u32 fixed2; + u32 c; + u32 d; + u32 e; +}; + +#define SC1810C_CTL_LINE_SW 0 +#define SC1810C_CTL_MUTE_SW 1 +#define SC1810C_CTL_AB_SW 3 +#define SC1810C_CTL_48V_SW 4 + +#define SC1810C_SET_STATE_REQ 161 +#define SC1810C_SET_STATE_REQTYPE SC1810C_CMD_REQTYPE +#define SC1810C_SET_STATE_F1 0x64656D73 +#define SC1810C_SET_STATE_F2 0xF4 + +#define SC1810C_GET_STATE_REQ 162 +#define SC1810C_GET_STATE_REQTYPE \ + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN) +#define SC1810C_GET_STATE_F1 SC1810C_SET_STATE_F1 +#define SC1810C_GET_STATE_F2 SC1810C_SET_STATE_F2 + +#define SC1810C_STATE_F1_IDX 2 +#define SC1810C_STATE_F2_IDX 3 + +/* + * This packet includes mixer volumes and + * various other fields, it's an extended + * version of ctl_packet, with a and b + * being zero and different f1/f2. + */ +struct s1810c_state_packet { + u32 fields[63]; +}; + +#define SC1810C_STATE_48V_SW 58 +#define SC1810C_STATE_LINE_SW 59 +#define SC1810C_STATE_MUTE_SW 60 +#define SC1810C_STATE_AB_SW 62 + +struct s1810_mixer_state { + uint16_t seqnum; + struct mutex usb_mutex; + struct mutex data_mutex; +}; + +static int +snd_s1810c_send_ctl_packet(struct usb_device *dev, u32 a, + u32 b, u32 c, u32 d, u32 e) +{ + struct s1810c_ctl_packet pkt = { 0 }; + int ret = 0; + + pkt.fixed1 = SC1810C_CMD_F1; + pkt.fixed2 = SC1810C_CMD_F2; + + pkt.a = a; + pkt.b = b; + pkt.c = c; + pkt.d = d; + /* + * Value for settings 0/1 for this + * output channel is always 0 (probably because + * there is no ADAT output on 1810c) + */ + pkt.e = (c == 4) ? 0 : e; + + ret = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + SC1810C_CMD_REQ, + SC1810C_CMD_REQTYPE, 0, 0, &pkt, sizeof(pkt)); + if (ret < 0) { + dev_warn(&dev->dev, "could not send ctl packet\n"); + return ret; + } + return 0; +} + +/* + * When opening Universal Control the program periodicaly + * sends and receives state packets for syncinc state between + * the device and the host. + * + * Note that if we send only the request to get data back we'll + * get an error, we need to first send an empty state packet and + * then ask to receive a filled. Their seqnumbers must also match. + */ +static int +snd_sc1810c_get_status_field(struct usb_device *dev, + u32 *field, int field_idx, uint16_t *seqnum) +{ + struct s1810c_state_packet pkt_out = { 0 }; + struct s1810c_state_packet pkt_in = { 0 }; + int ret = 0; + + pkt_out.fields[SC1810C_STATE_F1_IDX] = SC1810C_SET_STATE_F1; + pkt_out.fields[SC1810C_STATE_F2_IDX] = SC1810C_SET_STATE_F2; + ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), + SC1810C_SET_STATE_REQ, + SC1810C_SET_STATE_REQTYPE, + (*seqnum), 0, &pkt_out, sizeof(pkt_out)); + if (ret < 0) { + dev_warn(&dev->dev, "could not send state packet (%d)\n", ret); + return ret; + } + + ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), + SC1810C_GET_STATE_REQ, + SC1810C_GET_STATE_REQTYPE, + (*seqnum), 0, &pkt_in, sizeof(pkt_in)); + if (ret < 0) { + dev_warn(&dev->dev, "could not get state field %u (%d)\n", + field_idx, ret); + return ret; + } + + (*field) = pkt_in.fields[field_idx]; + (*seqnum)++; + return 0; +} + +/* + * This is what I got when bypassing the mixer with + * all channels split. I'm not 100% sure of what's going + * on, I could probably clean this up based on my observations + * but I prefer to keep the same behavior as the windows driver. + */ +static int snd_s1810c_init_mixer_maps(struct snd_usb_audio *chip) +{ + u32 a, b, c, e, n, off; + struct usb_device *dev = chip->dev; + + /* Set initial volume levels ? */ + a = 0x64; + e = 0xbc; + for (n = 0; n < 2; n++) { + off = n * 18; + for (b = off, c = 0; b < 18 + off; b++) { + /* This channel to all outputs ? */ + for (c = 0; c <= 8; c++) { + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } + /* This channel to main output (again) */ + snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); + } + /* + * I noticed on UC that DAW channels have different + * initial volumes (they can go both above and below + * 0db), so this makes sense. + */ + e = 0xb53bf0; + } + + /* Connect analog outputs ? */ + a = 0x65; + e = 0x01000000; + for (b = 1; b < 3; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); + } + snd_s1810c_send_ctl_packet(dev, a, 0, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 0, 0, 1, e); + + /* Set initial volume levels for S/PDIF mappings ? */ + a = 0x64; + e = 0xbc; + c = 3; + for (n = 0; n < 2; n++) { + off = n * 18; + for (b = off; b < 18 + off; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } + e = 0xb53bf0; + } + + /* Connect S/PDIF output ? */ + a = 0x65; + e = 0x01000000; + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); + + /* Connect all outputs (again) ? */ + a = 0x65; + e = 0x01000000; + for (b = 0; b < 4; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); + } + + /* Basic routing to get sound out of the device */ + a = 0x64; + e = 0x01000000; + for (c = 0; c < 4; c++) { + for (b = 0; b < 36; b++) { + if ((c == 0 && b == 18) || /* DAW1/2 -> Main */ + (c == 1 && b == 20) || /* DAW3/4 -> Line3/4 */ + (c == 2 && b == 22) || /* DAW4/5 -> Line5/4 */ + (c == 3 && b == 24)) { /* DAW5/6 -> S/PDIF */ + /* Left */ + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0); + b++; + /* Right */ + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } else { + /* Leave the rest disconnected */ + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0); + } + } + } + + /* Set initial volume levels for S/PDIF (again) ? */ + a = 0x64; + e = 0xbc; + c = 3; + for (n = 0; n < 2; n++) { + off = n * 18; + for (b = off; b < 18 + off; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } + e = 0xb53bf0; + } + + /* Connect S/PDIF outputs (again) ? */ + a = 0x65; + e = 0x01000000; + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); + + /* Again ? */ + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); + + return 0; +} + +/* + * Sync state with the device and retrieve the requested field, + * whose index is specified in (kctl->private_value & 0xFF), + * from the received fields array. + */ +static int +snd_s1810c_get_switch_state(struct usb_mixer_interface *mixer, + struct snd_kcontrol *kctl, u32 *state) +{ + struct snd_usb_audio *chip = mixer->chip; + struct s1810_mixer_state *private = mixer->private_data; + u32 field = 0; + u32 ctl_idx = (u32) (kctl->private_value & 0xFF); + int ret = 0; + + mutex_lock(&private->usb_mutex); + ret = snd_sc1810c_get_status_field(chip->dev, &field, + ctl_idx, &private->seqnum); + if (ret < 0) + goto unlock; + + *state = field; + unlock: + mutex_unlock(&private->usb_mutex); + return ret ? ret : 0; +} + +/* + * Send a control packet to the device for the control id + * specified in (kctl->private_value >> 8) with value + * specified in (kctl->private_value >> 16). + */ +static int +snd_s1810c_set_switch_state(struct usb_mixer_interface *mixer, + struct snd_kcontrol *kctl) +{ + struct snd_usb_audio *chip = mixer->chip; + struct s1810_mixer_state *private = mixer->private_data; + u32 pval = (u32) kctl->private_value; + u32 ctl_id = (pval >> 8) & 0xFF; + u32 ctl_val = (pval >> 16) & 0x1; + int ret = 0; + + mutex_lock(&private->usb_mutex); + ret = snd_s1810c_send_ctl_packet(chip->dev, 0, 0, 0, ctl_id, ctl_val); + mutex_unlock(&private->usb_mutex); + return ret; +} + +/* Generic get/set/init functions for switch controls */ + +static int +snd_s1810c_switch_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ctl_elem) +{ + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl); + struct usb_mixer_interface *mixer = list->mixer; + struct s1810_mixer_state *private = mixer->private_data; + u32 pval = (u32) kctl->private_value; + u32 ctl_idx = pval & 0xFF; + u32 state = 0; + int ret = 0; + + mutex_lock(&private->data_mutex); + ret = snd_s1810c_get_switch_state(mixer, kctl, &state); + if (ret < 0) + goto unlock; + + switch (ctl_idx) { + case SC1810C_STATE_LINE_SW: + case SC1810C_STATE_AB_SW: + ctl_elem->value.enumerated.item[0] = (int)state; + break; + default: + ctl_elem->value.integer.value[0] = (long)state; + } + + unlock: + mutex_unlock(&private->data_mutex); + return (ret < 0) ? ret : 0; +} + +static int +snd_s1810c_switch_set(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ctl_elem) +{ + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl); + struct usb_mixer_interface *mixer = list->mixer; + struct s1810_mixer_state *private = mixer->private_data; + u32 pval = (u32) kctl->private_value; + u32 ctl_idx = pval & 0xFF; + u32 curval = 0; + u32 newval = 0; + int ret = 0; + + mutex_lock(&private->data_mutex); + ret = snd_s1810c_get_switch_state(mixer, kctl, &curval); + if (ret < 0) + goto unlock; + + switch (ctl_idx) { + case SC1810C_STATE_LINE_SW: + case SC1810C_STATE_AB_SW: + newval = (u32) ctl_elem->value.enumerated.item[0]; + break; + default: + newval = (u32) ctl_elem->value.integer.value[0]; + } + + if (curval == newval) + goto unlock; + + kctl->private_value &= ~(0x1 << 16); + kctl->private_value |= (unsigned int)(newval & 0x1) << 16; + ret = snd_s1810c_set_switch_state(mixer, kctl); + + unlock: + mutex_unlock(&private->data_mutex); + return (ret < 0) ? 0 : 1; +} + +static int +snd_s1810c_switch_init(struct usb_mixer_interface *mixer, + const struct snd_kcontrol_new *new_kctl) +{ + struct snd_kcontrol *kctl; + struct usb_mixer_elem_info *elem; + + elem = kzalloc(sizeof(struct usb_mixer_elem_info), GFP_KERNEL); + if (!elem) + return -ENOMEM; + + elem->head.mixer = mixer; + elem->control = 0; + elem->head.id = 0; + elem->channels = 1; + + kctl = snd_ctl_new1(new_kctl, elem); + if (!kctl) { + kfree(elem); + return -ENOMEM; + } + kctl->private_free = snd_usb_mixer_elem_free; + + return snd_usb_mixer_add_control(&elem->head, kctl); +} + +static int +snd_s1810c_line_sw_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + static const char *const texts[2] = { + "Preamp On (Mic/Inst)", + "Preamp Off (Line in)" + }; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static const struct snd_kcontrol_new snd_s1810c_line_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line 1/2 Source Type Switch", + .info = snd_s1810c_line_sw_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_LINE_SW | SC1810C_CTL_LINE_SW << 8) +}; + +static const struct snd_kcontrol_new snd_s1810c_mute_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Mute Main Out Switch", + .info = snd_ctl_boolean_mono_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_MUTE_SW | SC1810C_CTL_MUTE_SW << 8) +}; + +static const struct snd_kcontrol_new snd_s1810c_48v_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "48V Phantom Power On Mic Inputs Switch", + .info = snd_ctl_boolean_mono_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_48V_SW | SC1810C_CTL_48V_SW << 8) +}; + +static int +snd_s1810c_ab_sw_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + static const char *const texts[2] = { + "1/2", + "3/4" + }; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static const struct snd_kcontrol_new snd_s1810c_ab_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Headphone 1 Source Route", + .info = snd_s1810c_ab_sw_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_AB_SW | SC1810C_CTL_AB_SW << 8) +}; + +static void snd_sc1810_mixer_state_free(struct usb_mixer_interface *mixer) +{ + struct s1810_mixer_state *private = mixer->private_data; + kfree(private); + mixer->private_data = NULL; +} + +/* Entry point, called from mixer_quirks.c */ +int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer) +{ + struct s1810_mixer_state *private = NULL; + struct snd_usb_audio *chip = mixer->chip; + struct usb_device *dev = chip->dev; + int ret = 0; + + /* Run this only once */ + if (!list_empty(&chip->mixer_list)) + return 0; + + dev_info(&dev->dev, + "Presonus Studio 1810c, device_setup: %u\n", chip->setup); + if (chip->setup == 1) + dev_info(&dev->dev, "(8out/18in @ 48KHz)\n"); + else if (chip->setup == 2) + dev_info(&dev->dev, "(6out/8in @ 192KHz)\n"); + else + dev_info(&dev->dev, "(8out/14in @ 96KHz)\n"); + + ret = snd_s1810c_init_mixer_maps(chip); + if (ret < 0) + return ret; + + private = kzalloc(sizeof(struct s1810_mixer_state), GFP_KERNEL); + if (!private) + return -ENOMEM; + + mutex_init(&private->usb_mutex); + mutex_init(&private->data_mutex); + + mixer->private_data = private; + mixer->private_free = snd_sc1810_mixer_state_free; + + private->seqnum = 1; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_line_sw); + if (ret < 0) + return ret; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_mute_sw); + if (ret < 0) + return ret; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_48v_sw); + if (ret < 0) + return ret; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw); + if (ret < 0) + return ret; + return ret; +} diff --git a/sound/usb/mixer_s1810c.h b/sound/usb/mixer_s1810c.h new file mode 100644 index 000000000..a79a3743c --- /dev/null +++ b/sound/usb/mixer_s1810c.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Presonus Studio 1810c driver for ALSA + * Copyright (C) 2019 Nick Kossifidis <mickflemm(a)gmail.com> + */ + +int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer); diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index a81c20664..9bbdea882 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1227,6 +1227,38 @@ static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, return 0; /* keep this altsetting */ } +static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip, + int iface, int altno) +{ + /* + * Altno settings: + * + * Playback (Interface 1): + * 1: 6 Analog + 2 S/PDIF + * 2: 6 Analog + 2 S/PDIF + * 3: 6 Analog + * + * Capture (Interface 2): + * 1: 8 Analog + 2 S/PDIF + 8 ADAT + * 2: 8 Analog + 2 S/PDIF + 4 ADAT + * 3: 8 Analog + */ + + /* + * I'll leave 2 as the default one and + * use device_setup to switch to the + * other two. + */ + if ((chip->setup == 0 || chip->setup > 2) && altno != 2) + return 1; + else if (chip->setup == 1 && altno != 1) + return 1; + else if (chip->setup == 2 && altno != 3) + return 1; + + return 0; +} + int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, int iface, int altno) @@ -1240,6 +1272,10 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, /* fasttrackpro usb: skip altsets incompatible with device_setup */ if (chip->usb_id == USB_ID(0x0763, 0x2012)) return fasttrackpro_skip_setting_quirk(chip, iface, altno); + /* presonus studio 1810c: skip altsets incompatible with device_setup */ + if (chip->usb_id == USB_ID(0x0194f, 0x010c)) + return s1810c_skip_setting_quirk(chip, iface, altno); + return 0; } -- 2.23.0

3 2

[alsa-devel] [PATCH v2] ALSA: usb-audio: Add boot quirk for MOTU M Series
by Alexander Tsoy 12 Jan '20

12 Jan '20

Add delay to make sure that audio urbs are not sent too early. Otherwise the device hangs. Windows driver makes ~2s delay, so use about the same time delay value. snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which is an overkill. Thus a quirk that is called only once is implemented. Also send two vendor-specific control messages before and after the delay. This behaviour is blindly copied from the Windows driver. Signed-off-by: Alexander Tsoy <alexander(a)tsoy.me> --- v2 changes: indentation fixes sound/usb/card.c | 4 ++++ sound/usb/quirks.c | 38 ++++++++++++++++++++++++++++++++++++++ sound/usb/quirks.h | 5 +++++ 3 files changed, 47 insertions(+) diff --git a/sound/usb/card.c b/sound/usb/card.c index 9f743ebae615..2f582ac7cf78 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -600,6 +600,10 @@ static int usb_audio_probe(struct usb_interface *intf, } } if (! chip) { + err = snd_usb_apply_boot_quirk_once(dev, intf, quirk, id); + if (err < 0) + return err; + /* it's a fresh one. * now look for an empty slot and create a new card instance */ diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 82184036437b..0464df785f2e 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1113,6 +1113,31 @@ static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev) return err; } +static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev) +{ + int ret; + + if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0))) + return -EINVAL; + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0, 0, NULL, 0, 1000); + + if (ret < 0) + return ret; + + msleep(2000); + + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x20, 0, NULL, 0, 1000); + + if (ret < 0) + return ret; + + return 0; +} + /* * Setup quirks */ @@ -1297,6 +1322,19 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, return 0; } +int snd_usb_apply_boot_quirk_once(struct usb_device *dev, + struct usb_interface *intf, + const struct snd_usb_audio_quirk *quirk, + unsigned int id) +{ + switch (id) { + case USB_ID(0x07fd, 0x0008): /* MOTU M Series */ + return snd_usb_motu_m_series_boot_quirk(dev); + } + + return 0; +} + /* * check if the device uses big-endian samples */ diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h index a80e0ddd0736..b46b108769e8 100644 --- a/sound/usb/quirks.h +++ b/sound/usb/quirks.h @@ -20,6 +20,11 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, const struct snd_usb_audio_quirk *quirk, unsigned int usb_id); +int snd_usb_apply_boot_quirk_once(struct usb_device *dev, + struct usb_interface *intf, + const struct snd_usb_audio_quirk *quirk, + unsigned int usb_id); + void snd_usb_set_format_quirk(struct snd_usb_substream *subs, struct audioformat *fmt); -- 2.24.1

1 0