December 2019 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: rt711: add rt711 codec driver
by shumingf＠realtek.com 09 Jan '20

09 Jan '20

From: Shuming Fan <shumingf(a)realtek.com> This is the initial codec driver for rt711. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt711-sdw.c | 552 +++++++++++++++ sound/soc/codecs/rt711-sdw.h | 281 ++++++++ sound/soc/codecs/rt711.c | 1293 ++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt711.h | 227 ++++++ 6 files changed, 2365 insertions(+) create mode 100644 sound/soc/codecs/rt711-sdw.c create mode 100644 sound/soc/codecs/rt711-sdw.h create mode 100644 sound/soc/codecs/rt711.c create mode 100644 sound/soc/codecs/rt711.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 146682049007..f58c6d35e47a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -165,6 +165,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT5670 if I2C select SND_SOC_RT5677 if I2C && SPI_MASTER select SND_SOC_RT5682 if I2C + select SND_SOC_RT711_SDW if SOUNDWIRE select SND_SOC_SGTL5000 if I2C select SND_SOC_SI476X if MFD_SI476X_CORE select SND_SOC_SIMPLE_AMPLIFIER @@ -1058,6 +1059,15 @@ config SND_SOC_RT5677_SPI config SND_SOC_RT5682 tristate +config SND_SOC_RT711 + tristate + +config SND_SOC_RT711_SDW + tristate "Realtek RT711 Codec - SDW" + depends on SOUNDWIRE + select SND_SOC_RT711 + select REGMAP_SOUNDWIRE + #Freescale sgtl5000 codec config SND_SOC_SGTL5000 tristate "Freescale SGTL5000 CODEC" diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 0290fb389835..3fb6d0c04f5d 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -173,6 +173,7 @@ snd-soc-rt5670-objs := rt5670.o snd-soc-rt5677-objs := rt5677.o snd-soc-rt5677-spi-objs := rt5677-spi.o snd-soc-rt5682-objs := rt5682.o +snd-soc-rt711-objs := rt711.o rt711-sdw.o snd-soc-sgtl5000-objs := sgtl5000.o snd-soc-alc5623-objs := alc5623.o snd-soc-alc5632-objs := alc5632.o @@ -464,6 +465,7 @@ obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o +obj-$(CONFIG_SND_SOC_RT711) += snd-soc-rt711.o obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o diff --git a/sound/soc/codecs/rt711-sdw.c b/sound/soc/codecs/rt711-sdw.c new file mode 100644 index 000000000000..e28dc84ede5b --- /dev/null +++ b/sound/soc/codecs/rt711-sdw.c @@ -0,0 +1,552 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// rt711-sdw.c -- rt711 ALSA SoC audio driver +// +// Copyright(c) 2019 Realtek Semiconductor Corp. +// +// + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_type.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <sound/soc.h> +#include "rt711.h" +#include "rt711-sdw.h" + +static bool rt711_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x00e0: + case 0x00f0: + case 0x2012 ... 0x2016: + case 0x201a ... 0x2027: + case 0x2029 ... 0x202a: + case 0x202d ... 0x2034: + case 0x2201 ... 0x2204: + case 0x2206 ... 0x2212: + case 0x2220 ... 0x2223: + case 0x2230 ... 0x2239: + case 0x2f01 ... 0x2f0f: + case 0x3000 ... 0x3fff: + case 0x7000 ... 0x7fff: + case 0x8300 ... 0x83ff: + case 0x9c00 ... 0x9cff: + case 0xb900 ... 0xb9ff: + case 0x752009: + case 0x752011: + case 0x75201a: + case 0x752045: + case 0x752046: + case 0x752048: + case 0x75204a: + case 0x75206b: + case 0x75206f: + case 0x752080: + case 0x752081: + case 0x752091: + case 0x755800: + return true; + default: + return false; + } +} + +static bool rt711_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x2016: + case 0x201b: + case 0x201c: + case 0x201d: + case 0x201f: + case 0x2021: + case 0x2023: + case 0x2230: + case 0x2012 ... 0x2015: /* HD-A read */ + case 0x202d ... 0x202f: /* BRA */ + case 0x2201 ... 0x2212: /* i2c debug */ + case 0x2220 ... 0x2223: /* decoded HD-A */ + case 0x9c00 ... 0x9cff: + case 0xb900 ... 0xb9ff: + case 0xff01: + case 0x75201a: + case 0x752046: + case 0x752080: + case 0x752081: + case 0x755800: + return true; + default: + return false; + } +} + +static int rt711_sdw_read(void *context, unsigned int reg, unsigned int *val) +{ + struct device *dev = context; + struct rt711_priv *rt711 = dev_get_drvdata(dev); + unsigned int sdw_data_3, sdw_data_2, sdw_data_1, sdw_data_0; + unsigned int reg2 = 0, reg3 = 0, reg4 = 0, mask, nid, val2; + unsigned int is_hda_reg = 1, is_index_reg = 0; + int ret; + + if (reg > 0xffff) + is_index_reg = 1; + + mask = reg & 0xf000; + + if (is_index_reg) { /* index registers */ + val2 = reg & 0xff; + reg = reg >> 8; + nid = reg & 0xff; + ret = regmap_write(rt711->sdw_regmap, reg, 0); + if (ret < 0) + return ret; + reg2 = reg + 0x1000; + reg2 |= 0x80; + ret = regmap_write(rt711->sdw_regmap, reg2, val2); + if (ret < 0) + return ret; + + reg3 = RT711_PRIV_DATA_R_H | nid; + ret = regmap_write(rt711->sdw_regmap, + reg3, ((*val >> 8) & 0xff)); + if (ret < 0) + return ret; + reg4 = reg3 + 0x1000; + reg4 |= 0x80; + ret = regmap_write(rt711->sdw_regmap, reg4, (*val & 0xff)); + if (ret < 0) + return ret; + } else if (mask == 0x3000) { + reg += 0x8000; + ret = regmap_write(rt711->sdw_regmap, reg, *val); + if (ret < 0) + return ret; + } else if (mask == 0x7000) { + reg += 0x2000; + reg |= 0x800; + ret = regmap_write(rt711->sdw_regmap, + reg, ((*val >> 8) & 0xff)); + if (ret < 0) + return ret; + reg2 = reg + 0x1000; + reg2 |= 0x80; + ret = regmap_write(rt711->sdw_regmap, reg2, (*val & 0xff)); + if (ret < 0) + return ret; + } else if ((reg & 0xff00) == 0x8300) { /* for R channel */ + reg2 = reg - 0x1000; + reg2 &= ~0x80; + ret = regmap_write(rt711->sdw_regmap, + reg2, ((*val >> 8) & 0xff)); + if (ret < 0) + return ret; + ret = regmap_write(rt711->sdw_regmap, reg, (*val & 0xff)); + if (ret < 0) + return ret; + } else if (mask == 0x9000) { + ret = regmap_write(rt711->sdw_regmap, + reg, ((*val >> 8) & 0xff)); + if (ret < 0) + return ret; + reg2 = reg + 0x1000; + reg2 |= 0x80; + ret = regmap_write(rt711->sdw_regmap, reg2, (*val & 0xff)); + if (ret < 0) + return ret; + } else if (mask == 0xb000) { + ret = regmap_write(rt711->sdw_regmap, reg, *val); + if (ret < 0) + return ret; + } else { + ret = regmap_read(rt711->sdw_regmap, reg, val); + if (ret < 0) + return ret; + is_hda_reg = 0; + } + + if (is_hda_reg || is_index_reg) { + sdw_data_3 = 0; + sdw_data_2 = 0; + sdw_data_1 = 0; + sdw_data_0 = 0; + ret = regmap_read(rt711->sdw_regmap, + RT711_READ_HDA_3, &sdw_data_3); + if (ret < 0) + return ret; + ret = regmap_read(rt711->sdw_regmap, + RT711_READ_HDA_2, &sdw_data_2); + if (ret < 0) + return ret; + ret = regmap_read(rt711->sdw_regmap, + RT711_READ_HDA_1, &sdw_data_1); + if (ret < 0) + return ret; + ret = regmap_read(rt711->sdw_regmap, + RT711_READ_HDA_0, &sdw_data_0); + if (ret < 0) + return ret; + *val = ((sdw_data_3 & 0xff) << 24) | + ((sdw_data_2 & 0xff) << 16) | + ((sdw_data_1 & 0xff) << 8) | (sdw_data_0 & 0xff); + } + + if (is_hda_reg == 0) + dev_dbg(dev, "[%s] %04x => %08x\n", __func__, reg, *val); + else if (is_index_reg) + dev_dbg(dev, "[%s] %04x %04x %04x %04x => %08x\n", + __func__, reg, reg2, reg3, reg4, *val); + else + dev_dbg(dev, "[%s] %04x %04x => %08x\n", + __func__, reg, reg2, *val); + + return 0; +} + +static int rt711_sdw_write(void *context, unsigned int reg, unsigned int val) +{ + struct device *dev = context; + struct rt711_priv *rt711 = dev_get_drvdata(dev); + unsigned int reg2 = 0, reg3, reg4, nid, mask, val2; + unsigned int is_index_reg = 0; + int ret; + + if (reg > 0xffff) + is_index_reg = 1; + + mask = reg & 0xf000; + + if (is_index_reg) { /* index registers */ + val2 = reg & 0xff; + reg = reg >> 8; + nid = reg & 0xff; + ret = regmap_write(rt711->sdw_regmap, reg, 0); + if (ret < 0) + return ret; + reg2 = reg + 0x1000; + reg2 |= 0x80; + ret = regmap_write(rt711->sdw_regmap, reg2, val2); + if (ret < 0) + return ret; + + reg3 = RT711_PRIV_DATA_W_H | nid; + ret = regmap_write(rt711->sdw_regmap, + reg3, ((val >> 8) & 0xff)); + if (ret < 0) + return ret; + reg4 = reg3 + 0x1000; + reg4 |= 0x80; + ret = regmap_write(rt711->sdw_regmap, reg4, (val & 0xff)); + if (ret < 0) + return ret; + is_index_reg = 1; + } else if (reg < 0x4fff) { + ret = regmap_write(rt711->sdw_regmap, reg, val); + if (ret < 0) + return ret; + } else if (reg == RT711_FUNC_RESET) { + ret = regmap_write(rt711->sdw_regmap, reg, val); + if (ret < 0) + return ret; + } else if (mask == 0x7000) { + ret = regmap_write(rt711->sdw_regmap, + reg, ((val >> 8) & 0xff)); + if (ret < 0) + return ret; + reg2 = reg + 0x1000; + reg2 |= 0x80; + ret = regmap_write(rt711->sdw_regmap, reg2, (val & 0xff)); + if (ret < 0) + return ret; + } else if ((reg & 0xff00) == 0x8300) { /* for R channel */ + reg2 = reg - 0x1000; + reg2 &= ~0x80; + ret = regmap_write(rt711->sdw_regmap, + reg2, ((val >> 8) & 0xff)); + if (ret < 0) + return ret; + ret = regmap_write(rt711->sdw_regmap, reg, (val & 0xff)); + if (ret < 0) + return ret; + } + + if (reg2 == 0) + dev_dbg(dev, "[%s] %04x <= %04x\n", __func__, reg, val); + else if (is_index_reg) + dev_dbg(dev, "[%s] %04x %04x %04x %04x <= %04x %04x\n", + __func__, reg, reg2, reg3, reg4, val2, val); + else + dev_dbg(dev, "[%s] %04x %04x <= %04x\n", + __func__, reg, reg2, val); + + return 0; +} + +static const struct regmap_config rt711_regmap = { + .reg_bits = 24, + .val_bits = 32, + .readable_reg = rt711_readable_register, + .volatile_reg = rt711_volatile_register, + .max_register = 0x755800, + .reg_defaults = rt711_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(rt711_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, + .reg_read = rt711_sdw_read, + .reg_write = rt711_sdw_write, +}; + +static const struct regmap_config rt711_sdw_regmap = { + .name = "sdw", + .reg_bits = 32, + .val_bits = 8, + .readable_reg = rt711_readable_register, + .max_register = 0xff01, + .cache_type = REGCACHE_NONE, + .use_single_read = true, + .use_single_write = true, +}; + +static int rt711_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct rt711_priv *rt711 = dev_get_drvdata(&slave->dev); + + /* Update the status */ + rt711->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + rt711->hw_init = false; + + /* + * Perform initialization only if slave status is present and + * hw_init flag is false + */ + if (rt711->hw_init || rt711->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return rt711_io_init(&slave->dev, slave); +} + +static int rt711_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int nval, i, num_of_ports = 1; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->paging_support = false; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = 0x14; /* BITMAP: 00010100 */ + prop->sink_ports = 0x8; /* BITMAP: 00001000 */ + + nval = hweight32(prop->source_ports); + num_of_ports += nval; + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), + GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->src_dpn_prop; + addr = prop->source_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* do this again for sink now */ + nval = hweight32(prop->sink_ports); + num_of_ports += nval; + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), + GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* Allocate port_ready based on num_of_ports */ + slave->port_ready = devm_kcalloc(&slave->dev, num_of_ports, + sizeof(*slave->port_ready), + GFP_KERNEL); + if (!slave->port_ready) + return -ENOMEM; + + /* Initialize completion */ + for (i = 0; i < num_of_ports; i++) + init_completion(&slave->port_ready[i]); + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + /* wake-up event */ + prop->wake_capable = 1; + + return 0; +} + +static int rt711_bus_config(struct sdw_slave *slave, + struct sdw_bus_params *params) +{ + struct rt711_priv *rt711 = dev_get_drvdata(&slave->dev); + int ret; + + memcpy(&rt711->params, params, sizeof(*params)); + + ret = rt711_clock_config(&slave->dev); + if (ret < 0) + dev_err(&slave->dev, "Invalid clk config"); + + return ret; +} + +static int rt711_interrupt_callback(struct sdw_slave *slave, + struct sdw_slave_intr_status *status) +{ + struct rt711_priv *rt711 = dev_get_drvdata(&slave->dev); + + dev_dbg(&slave->dev, + "%s control_port_stat=%x", __func__, status->control_port); + + if (status->control_port & 0x4) { + mod_delayed_work(system_power_efficient_wq, + &rt711->jack_detect_work, msecs_to_jiffies(250)); + } + + return 0; +} + +static struct sdw_slave_ops rt711_slave_ops = { + .read_prop = rt711_read_prop, + .interrupt_callback = rt711_interrupt_callback, + .update_status = rt711_update_status, + .bus_config = rt711_bus_config, +}; + +static int rt711_sdw_probe(struct sdw_slave *slave, + const struct sdw_device_id *id) +{ + struct regmap *sdw_regmap, *regmap; + + /* Assign ops */ + slave->ops = &rt711_slave_ops; + + /* Regmap Initialization */ + sdw_regmap = devm_regmap_init_sdw(slave, &rt711_sdw_regmap); + if (!sdw_regmap) + return -EINVAL; + + regmap = devm_regmap_init(&slave->dev, NULL, + &slave->dev, &rt711_regmap); + if (!regmap) + return -EINVAL; + + rt711_init(&slave->dev, sdw_regmap, regmap, slave); + + return 0; +} + +static int rt711_sdw_remove(struct sdw_slave *slave) +{ + struct rt711_priv *rt711 = dev_get_drvdata(&slave->dev); + + if (rt711 && rt711->hw_init) { + cancel_delayed_work(&rt711->jack_detect_work); + cancel_delayed_work(&rt711->jack_btn_check_work); + cancel_work_sync(&rt711->calibration_work); + } + + return 0; +} + +static const struct sdw_device_id rt711_id[] = { + SDW_SLAVE_ENTRY(0x025d, 0x711, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, rt711_id); + +static int rt711_dev_suspend(struct device *dev) +{ + struct rt711_priv *rt711 = dev_get_drvdata(dev); + + if (!rt711->hw_init) + return 0; + + regcache_cache_only(rt711->regmap, true); + + return 0; +} + +#define RT711_PROBE_TIMEOUT 2000 + +static int rt711_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct rt711_priv *rt711 = dev_get_drvdata(dev); + unsigned long time; + + if (!rt711->hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(RT711_PROBE_TIMEOUT)); + if (!time) { + dev_err(&slave->dev, "Initialization not complete, timed out\n"); + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(rt711->regmap, false); + regcache_sync_region(rt711->regmap, 0x3000, 0x8fff); + regcache_sync_region(rt711->regmap, 0x752009, 0x752091); + + return 0; +} + +static const struct dev_pm_ops rt711_pm = { + SET_SYSTEM_SLEEP_PM_OPS(rt711_dev_suspend, rt711_dev_resume) + SET_RUNTIME_PM_OPS(rt711_dev_suspend, rt711_dev_resume, NULL) +}; + +static struct sdw_driver rt711_sdw_driver = { + .driver = { + .name = "rt711", + .owner = THIS_MODULE, + .pm = &rt711_pm, + }, + .probe = rt711_sdw_probe, + .remove = rt711_sdw_remove, + .ops = &rt711_slave_ops, + .id_table = rt711_id, +}; +module_sdw_driver(rt711_sdw_driver); + +MODULE_DESCRIPTION("ASoC RT711 SDW driver"); +MODULE_AUTHOR("Shuming Fan <shumingf(a)realtek.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/rt711-sdw.h b/sound/soc/codecs/rt711-sdw.h new file mode 100644 index 000000000000..43b2b984b29c --- /dev/null +++ b/sound/soc/codecs/rt711-sdw.h @@ -0,0 +1,281 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * rt711-sdw.h -- RT711 ALSA SoC audio driver header + * + * Copyright(c) 2019 Realtek Semiconductor Corp. + */ + +#ifndef __RT711_SDW_H__ +#define __RT711_SDW_H__ + +static const struct reg_default rt711_reg_defaults[] = { + { 0x0000, 0x00 }, + { 0x0001, 0x00 }, + { 0x0002, 0x00 }, + { 0x0003, 0x00 }, + { 0x0004, 0x00 }, + { 0x0005, 0x01 }, + { 0x0020, 0x00 }, + { 0x0022, 0x00 }, + { 0x0023, 0x00 }, + { 0x0024, 0x00 }, + { 0x0025, 0x00 }, + { 0x0026, 0x00 }, + { 0x0030, 0x00 }, + { 0x0032, 0x00 }, + { 0x0033, 0x00 }, + { 0x0034, 0x00 }, + { 0x0035, 0x00 }, + { 0x0036, 0x00 }, + { 0x0040, 0x00 }, + { 0x0041, 0x00 }, + { 0x0042, 0x00 }, + { 0x0043, 0x00 }, + { 0x0044, 0x20 }, + { 0x0045, 0x01 }, + { 0x0046, 0x01 }, + { 0x0050, 0x20 }, + { 0x0051, 0x02 }, + { 0x0052, 0x5d }, + { 0x0053, 0x07 }, + { 0x0054, 0x11 }, + { 0x0055, 0x00 }, + { 0x0060, 0x00 }, + { 0x0070, 0x00 }, + { 0x0080, 0xc0 }, + { 0x0088, 0x00 }, + { 0x00e0, 0x00 }, + { 0x00e1, 0x00 }, + { 0x00e2, 0x00 }, + { 0x00e3, 0x00 }, + { 0x00e5, 0x00 }, + { 0x00ee, 0x00 }, + { 0x00ef, 0x00 }, + { 0x00f0, 0x00 }, + { 0x00f1, 0x00 }, + { 0x00f2, 0x00 }, + { 0x00f3, 0x00 }, + { 0x00f4, 0x00 }, + { 0x00f5, 0x00 }, + { 0x00fe, 0x00 }, + { 0x00ff, 0x00 }, + { 0x0100, 0x00 }, + { 0x0101, 0x00 }, + { 0x0102, 0x00 }, + { 0x0103, 0x00 }, + { 0x0104, 0x00 }, + { 0x0105, 0x00 }, + { 0x0120, 0x00 }, + { 0x0122, 0x00 }, + { 0x0123, 0x00 }, + { 0x0124, 0x00 }, + { 0x0125, 0x00 }, + { 0x0126, 0x00 }, + { 0x0127, 0x00 }, + { 0x0130, 0x00 }, + { 0x0132, 0x00 }, + { 0x0133, 0x00 }, + { 0x0134, 0x00 }, + { 0x0135, 0x00 }, + { 0x0136, 0x00 }, + { 0x0137, 0x00 }, + { 0x0200, 0x00 }, + { 0x0201, 0x00 }, + { 0x0202, 0x00 }, + { 0x0203, 0x00 }, + { 0x0204, 0x00 }, + { 0x0205, 0x03 }, + { 0x0220, 0x00 }, + { 0x0222, 0x00 }, + { 0x0223, 0x00 }, + { 0x0224, 0x00 }, + { 0x0225, 0x00 }, + { 0x0226, 0x00 }, + { 0x0227, 0x00 }, + { 0x0230, 0x00 }, + { 0x0232, 0x00 }, + { 0x0233, 0x00 }, + { 0x0234, 0x00 }, + { 0x0235, 0x00 }, + { 0x0236, 0x00 }, + { 0x0237, 0x00 }, + { 0x0300, 0x00 }, + { 0x0301, 0x00 }, + { 0x0302, 0x20 }, + { 0x0303, 0x00 }, + { 0x0304, 0x00 }, + { 0x0305, 0x03 }, + { 0x0320, 0x00 }, + { 0x0322, 0x00 }, + { 0x0323, 0x00 }, + { 0x0324, 0x00 }, + { 0x0325, 0x00 }, + { 0x0326, 0x00 }, + { 0x0327, 0x00 }, + { 0x0330, 0x00 }, + { 0x0332, 0x00 }, + { 0x0333, 0x00 }, + { 0x0334, 0x00 }, + { 0x0335, 0x00 }, + { 0x0336, 0x00 }, + { 0x0337, 0x00 }, + { 0x0400, 0x00 }, + { 0x0401, 0x00 }, + { 0x0402, 0x00 }, + { 0x0403, 0x00 }, + { 0x0404, 0x00 }, + { 0x0405, 0x03 }, + { 0x0420, 0x00 }, + { 0x0422, 0x00 }, + { 0x0423, 0x00 }, + { 0x0424, 0x00 }, + { 0x0425, 0x00 }, + { 0x0426, 0x00 }, + { 0x0427, 0x00 }, + { 0x0430, 0x00 }, + { 0x0432, 0x00 }, + { 0x0433, 0x00 }, + { 0x0434, 0x00 }, + { 0x0435, 0x00 }, + { 0x0436, 0x00 }, + { 0x0437, 0x00 }, + { 0x0f00, 0x00 }, + { 0x0f01, 0x00 }, + { 0x0f02, 0x20 }, + { 0x0f03, 0x00 }, + { 0x0f04, 0x00 }, + { 0x0f05, 0x03 }, + { 0x0f06, 0x00 }, + { 0x0f07, 0x00 }, + { 0x0f08, 0x00 }, + { 0x0f09, 0x00 }, + { 0x0f10, 0x00 }, + { 0x0f11, 0x00 }, + { 0x0f12, 0x00 }, + { 0x0f13, 0x00 }, + { 0x0f14, 0x00 }, + { 0x0f15, 0x00 }, + { 0x0f16, 0x00 }, + { 0x0f17, 0x00 }, + { 0x0f18, 0x00 }, + { 0x0f19, 0x00 }, + { 0x0f1a, 0x00 }, + { 0x0f1b, 0x00 }, + { 0x0f1c, 0x00 }, + { 0x0f1d, 0x00 }, + { 0x0f1e, 0x00 }, + { 0x0f1f, 0x00 }, + { 0x0f20, 0x00 }, + { 0x0f22, 0x00 }, + { 0x0f23, 0x00 }, + { 0x0f24, 0x00 }, + { 0x0f25, 0x00 }, + { 0x0f26, 0x00 }, + { 0x0f27, 0x00 }, + { 0x0f30, 0x00 }, + { 0x0f32, 0x00 }, + { 0x0f33, 0x00 }, + { 0x0f34, 0x00 }, + { 0x0f35, 0x00 }, + { 0x0f36, 0x00 }, + { 0x0f37, 0x00 }, + { 0x2012, 0x00 }, + { 0x2013, 0x00 }, + { 0x2014, 0x00 }, + { 0x2015, 0x00 }, + { 0x2016, 0x00 }, + { 0x201a, 0x00 }, + { 0x201b, 0x00 }, + { 0x201c, 0x0c }, + { 0x201d, 0x00 }, + { 0x201e, 0x00 }, + { 0x201f, 0x00 }, + { 0x2020, 0x00 }, + { 0x2021, 0x00 }, + { 0x2022, 0x00 }, + { 0x2023, 0x00 }, + { 0x2024, 0x00 }, + { 0x2025, 0x01 }, + { 0x2026, 0x00 }, + { 0x2027, 0x00 }, + { 0x2029, 0x00 }, + { 0x202a, 0x00 }, + { 0x202d, 0x00 }, + { 0x202e, 0x00 }, + { 0x202f, 0x00 }, + { 0x2030, 0x00 }, + { 0x2031, 0x00 }, + { 0x2032, 0x00 }, + { 0x2033, 0x00 }, + { 0x2034, 0x00 }, + { 0x2201, 0xc7 }, + { 0x2202, 0x0c }, + { 0x2203, 0x22 }, + { 0x2204, 0x04 }, + { 0x2206, 0x00 }, + { 0x2207, 0x00 }, + { 0x2208, 0x00 }, + { 0x2209, 0x00 }, + { 0x220a, 0x00 }, + { 0x220b, 0x00 }, + { 0x220c, 0x00 }, + { 0x220d, 0x04 }, + { 0x220e, 0x00 }, + { 0x220f, 0x00 }, + { 0x2211, 0x01 }, + { 0x2212, 0x00 }, + { 0x2220, 0x00 }, + { 0x2221, 0x00 }, + { 0x2222, 0x00 }, + { 0x2223, 0x00 }, + { 0x2230, 0x00 }, + { 0x2231, 0x2f }, + { 0x2232, 0x80 }, + { 0x2233, 0x00 }, + { 0x2234, 0x00 }, + { 0x2235, 0x00 }, + { 0x2236, 0x00 }, + { 0x2237, 0x00 }, + { 0x2238, 0x00 }, + { 0x2239, 0x00 }, + { 0x2f01, 0x00 }, + { 0x2f02, 0x09 }, + { 0x2f03, 0x00 }, + { 0x2f04, 0x00 }, + { 0x2f05, 0x0b }, + { 0x2f06, 0x01 }, + { 0x2f07, 0xcf }, + { 0x2f08, 0x00 }, + { 0x2f09, 0x00 }, + { 0x2f0a, 0x00 }, + { 0x2f0b, 0x00 }, + { 0x2f0c, 0x00 }, + { 0x2f0d, 0x00 }, + { 0x2f0e, 0x00 }, + { 0x2f0f, 0x00 }, + { 0x3122, 0x00 }, + { 0x3123, 0x00 }, + { 0x7303, 0x57 }, + { 0x8383, 0x57 }, + { 0x7308, 0x97 }, + { 0x8388, 0x97 }, + { 0x7309, 0x97 }, + { 0x8389, 0x97 }, + { 0x7312, 0x00 }, + { 0x8392, 0x00 }, + { 0x7313, 0x00 }, + { 0x8393, 0x00 }, + { 0x7319, 0x00 }, + { 0x8399, 0x00 }, + { 0x752009, 0x1029 }, + { 0x752011, 0x007a }, + { 0x75201a, 0x8003 }, + { 0x752045, 0x5289 }, + { 0x752048, 0xd049 }, + { 0x75204a, 0xa83b }, + { 0x75206b, 0x5064 }, + { 0x75206f, 0x058b }, + { 0x752091, 0x0000 }, +}; + +#endif /* __RT711_SDW_H__ */ diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c new file mode 100644 index 000000000000..3bebba7a63be --- /dev/null +++ b/sound/soc/codecs/rt711.c @@ -0,0 +1,1293 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// rt711.c -- rt711 ALSA SoC audio driver +// +// Copyright(c) 2019 Realtek Semiconductor Corp. +// +// + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm_runtime.h> +#include <linux/pm.h> +#include <linux/soundwire/sdw.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/hda_verbs.h> +#include <sound/jack.h> + +#include "rt711.h" + +static int rt711_index_write(struct regmap *regmap, + unsigned int nid, unsigned int reg, unsigned int value) +{ + int ret; + unsigned int addr = ((RT711_PRIV_INDEX_W_H | nid) << 8) | reg; + + ret = regmap_write(regmap, addr, value); + if (ret < 0) + pr_err("Failed to set private value: %06x <= %04x ret=%d\n", + addr, value, ret); + + return ret; +} + +static int rt711_index_read(struct regmap *regmap, + unsigned int nid, unsigned int reg, unsigned int *value) +{ + int ret; + unsigned int addr = ((RT711_PRIV_INDEX_W_H | nid) << 8) | reg; + + *value = 0; + ret = regmap_read(regmap, addr, value); + if (ret < 0) + pr_err("Failed to get private value: %06x => %04x ret=%d\n", + addr, *value, ret); + + return ret; +} + +static int rt711_index_update_bits(struct regmap *regmap, unsigned int nid, + unsigned int reg, unsigned int mask, unsigned int val) +{ + unsigned int tmp, orig; + int ret; + + ret = rt711_index_read(regmap, nid, reg, &orig); + if (ret < 0) + return ret; + + tmp = orig & ~mask; + tmp |= val & mask; + + return rt711_index_write(regmap, nid, reg, tmp); +} + +static void rt711_reset(struct regmap *regmap) +{ + regmap_write(regmap, RT711_FUNC_RESET, 0); + rt711_index_update_bits(regmap, RT711_VENDOR_REG, + RT711_PARA_VERB_CTL, RT711_HIDDEN_REG_SW_RESET, + RT711_HIDDEN_REG_SW_RESET); +} + +static int rt711_calibration(struct rt711_priv *rt711) +{ + unsigned int val, loop = 0; + struct device *dev; + struct regmap *regmap = rt711->regmap; + int ret = 0; + + mutex_lock(&rt711->calibrate_mutex); + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D0); + + dev = regmap_get_device(regmap); + + /* Calibration manual mode */ + rt711_index_update_bits(regmap, RT711_VENDOR_REG, RT711_FSM_CTL, + 0xf, 0x0); + + /* trigger */ + rt711_index_update_bits(regmap, RT711_VENDOR_CALI, + RT711_DAC_DC_CALI_CTL1, RT711_DAC_DC_CALI_TRIGGER, + RT711_DAC_DC_CALI_TRIGGER); + + /* wait for calibration process */ + rt711_index_read(regmap, RT711_VENDOR_CALI, + RT711_DAC_DC_CALI_CTL1, &val); + + while (val & RT711_DAC_DC_CALI_TRIGGER) { + if (loop >= 500) { + pr_err("%s, calibration time-out!\n", + __func__); + ret = -ETIMEDOUT; + break; + } + loop++; + + usleep_range(10000, 11000); + rt711_index_read(regmap, RT711_VENDOR_CALI, + RT711_DAC_DC_CALI_CTL1, &val); + } + + /* depop mode */ + rt711_index_update_bits(regmap, RT711_VENDOR_REG, + RT711_FSM_CTL, 0xf, RT711_DEPOP_CTL); + + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D3); + mutex_unlock(&rt711->calibrate_mutex); + + dev_dbg(dev, "%s calibration complete, ret=%d\n", __func__, ret); + return ret; +} + +static unsigned int rt711_button_detect(struct rt711_priv *rt711) +{ + unsigned int btn_type = 0, val80, val81; + int ret; + + ret = rt711_index_read(rt711->regmap, RT711_VENDOR_REG, + RT711_IRQ_FLAG_TABLE1, &val80); + if (ret < 0) + goto read_error; + ret = rt711_index_read(rt711->regmap, RT711_VENDOR_REG, + RT711_IRQ_FLAG_TABLE2, &val81); + if (ret < 0) + goto read_error; + + val80 &= 0x0381; + val81 &= 0xff00; + + switch (val80) { + case 0x0200: + case 0x0100: + case 0x0080: + btn_type |= SND_JACK_BTN_0; + break; + case 0x0001: + btn_type |= SND_JACK_BTN_3; + break; + } + switch (val81) { + case 0x8000: + case 0x4000: + case 0x2000: + btn_type |= SND_JACK_BTN_1; + break; + case 0x1000: + case 0x0800: + case 0x0400: + btn_type |= SND_JACK_BTN_2; + break; + case 0x0200: + case 0x0100: + btn_type |= SND_JACK_BTN_3; + break; + } +read_error: + return btn_type; +} + +static int rt711_headset_detect(struct rt711_priv *rt711) +{ + unsigned int buf, loop = 0; + int ret; + unsigned int jack_status = 0, reg; + + ret = rt711_index_read(rt711->regmap, RT711_VENDOR_REG, + RT711_COMBO_JACK_AUTO_CTL2, &buf); + if (ret < 0) + goto io_error; + + while (loop < 500 && + (buf & RT711_COMBOJACK_AUTO_DET_STATUS) == 0) { + loop++; + + usleep_range(9000, 10000); + ret = rt711_index_read(rt711->regmap, RT711_VENDOR_REG, + RT711_COMBO_JACK_AUTO_CTL2, &buf); + if (ret < 0) + goto io_error; + + reg = RT711_VERB_GET_PIN_SENSE | RT711_HP_OUT; + ret = regmap_read(rt711->regmap, reg, &jack_status); + if (ret < 0) + goto io_error; + if ((jack_status & (1 << 31)) == 0) + goto remove_error; + } + + if (loop >= 500) + goto to_error; + + if (buf & RT711_COMBOJACK_AUTO_DET_TRS) + rt711->jack_type = SND_JACK_HEADPHONE; + else if ((buf & RT711_COMBOJACK_AUTO_DET_CTIA) || + (buf & RT711_COMBOJACK_AUTO_DET_OMTP)) + rt711->jack_type = SND_JACK_HEADSET; + + return 0; + +to_error: + ret = -ETIMEDOUT; + pr_err_ratelimited("Time-out error in %s\n", __func__); + return ret; +io_error: + pr_err_ratelimited("IO error in %s, ret %d\n", __func__, ret); + return ret; +remove_error: + pr_err_ratelimited("Jack removal in %s\n", __func__); + return -ENODEV; +} + +static void rt711_jack_detect_handler(struct work_struct *work) +{ + struct rt711_priv *rt711 = + container_of(work, struct rt711_priv, jack_detect_work.work); + int btn_type = 0, ret; + unsigned int jack_status = 0, reg; + + if (!rt711->hs_jack) + return; + + if (!rt711->component->card->instantiated) + return; + + reg = RT711_VERB_GET_PIN_SENSE | RT711_HP_OUT; + ret = regmap_read(rt711->regmap, reg, &jack_status); + if (ret < 0) + goto io_error; + + /* pin attached */ + if (jack_status & (1 << 31)) { + /* jack in */ + if (rt711->jack_type == 0) { + ret = rt711_headset_detect(rt711); + if (ret < 0) + return; + if (rt711->jack_type == SND_JACK_HEADSET) + btn_type = rt711_button_detect(rt711); + } else if (rt711->jack_type == SND_JACK_HEADSET) { + /* jack is already in, report button event */ + btn_type = rt711_button_detect(rt711); + } + } else { + /* jack out */ + rt711->jack_type = 0; + } + + dev_dbg(&rt711->slave->dev, + "in %s, jack_type=0x%x\n", __func__, rt711->jack_type); + dev_dbg(&rt711->slave->dev, + "in %s, btn_type=0x%x\n", __func__, btn_type); + + snd_soc_jack_report(rt711->hs_jack, rt711->jack_type | btn_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + + if (btn_type) { + /* button released */ + snd_soc_jack_report(rt711->hs_jack, rt711->jack_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + + mod_delayed_work(system_power_efficient_wq, + &rt711->jack_btn_check_work, msecs_to_jiffies(200)); + } + + return; + +io_error: + pr_err_ratelimited("IO error in %s, ret %d\n", __func__, ret); +} + +static void rt711_btn_check_handler(struct work_struct *work) +{ + struct rt711_priv *rt711 = container_of(work, struct rt711_priv, + jack_btn_check_work.work); + int btn_type = 0, ret; + unsigned int jack_status = 0, reg; + + reg = RT711_VERB_GET_PIN_SENSE | RT711_HP_OUT; + ret = regmap_read(rt711->regmap, reg, &jack_status); + if (ret < 0) + goto io_error; + + /* pin attached */ + if (jack_status & (1 << 31)) { + if (rt711->jack_type == SND_JACK_HEADSET) { + /* jack is already in, report button event */ + btn_type = rt711_button_detect(rt711); + } + } else { + rt711->jack_type = 0; + } + + /* cbj comparator */ + ret = rt711_index_read(rt711->regmap, RT711_VENDOR_REG, + RT711_COMBO_JACK_AUTO_CTL2, &reg); + if (ret < 0) + goto io_error; + + if ((reg & 0xf0) == 0xf0) + btn_type = 0; + + dev_dbg(&rt711->slave->dev, + "%s, btn_type=0x%x\n", __func__, btn_type); + snd_soc_jack_report(rt711->hs_jack, rt711->jack_type | btn_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + + if (btn_type) { + /* button released */ + snd_soc_jack_report(rt711->hs_jack, rt711->jack_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + + mod_delayed_work(system_power_efficient_wq, + &rt711->jack_btn_check_work, msecs_to_jiffies(200)); + } + + return; + +io_error: + pr_err_ratelimited("IO error in %s, ret %d\n", __func__, ret); +} + +static void rt711_jack_init(struct rt711_priv *rt711) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(rt711->component); + + mutex_lock(&rt711->calibrate_mutex); + /* power on */ + if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D0); + + if (rt711->hs_jack) { + /* unsolicited response & IRQ control */ + regmap_write(rt711->regmap, + RT711_SET_MIC2_UNSOLICITED_ENABLE, 0x82); + regmap_write(rt711->regmap, + RT711_SET_HP_UNSOLICITED_ENABLE, 0x81); + regmap_write(rt711->regmap, + RT711_SET_INLINE_UNSOLICITED_ENABLE, 0x83); + rt711_index_write(rt711->regmap, RT711_VENDOR_REG, + 0x10, 0x2420); + rt711_index_write(rt711->regmap, RT711_VENDOR_REG, + 0x19, 0x2e11); + + switch (rt711->jd_src) { + case RT711_JD1: + /* default settings was already for JD1 */ + break; + case RT711_JD2: + rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG, + RT711_JD_CTL2, RT711_JD2_2PORT_200K_DECODE_HP | + RT711_HP_JD_SEL_JD2, + RT711_JD2_2PORT_200K_DECODE_HP | + RT711_HP_JD_SEL_JD2); + rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG, + RT711_CC_DET1, + RT711_HP_JD_FINAL_RESULT_CTL_JD12, + RT711_HP_JD_FINAL_RESULT_CTL_JD12); + break; + default: + dev_warn(rt711->component->dev, "Wrong JD source\n"); + break; + } + + dev_dbg(&rt711->slave->dev, "in %s enable\n", __func__); + + mod_delayed_work(system_power_efficient_wq, + &rt711->jack_detect_work, msecs_to_jiffies(250)); + } else { + regmap_write(rt711->regmap, + RT711_SET_MIC2_UNSOLICITED_ENABLE, 0x00); + regmap_write(rt711->regmap, + RT711_SET_HP_UNSOLICITED_ENABLE, 0x00); + regmap_write(rt711->regmap, + RT711_SET_INLINE_UNSOLICITED_ENABLE, 0x00); + + dev_dbg(&rt711->slave->dev, "in %s disable\n", __func__); + } + + /* power off */ + if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D3); + mutex_unlock(&rt711->calibrate_mutex); +} + +static int rt711_set_jack_detect(struct snd_soc_component *component, + struct snd_soc_jack *hs_jack, void *data) +{ + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + + rt711->hs_jack = hs_jack; + + if (!rt711->hw_init) { + dev_dbg(&rt711->slave->dev, + "%s hw_init not ready yet\n", __func__); + return 0; + } + + rt711_jack_init(rt711); + + return 0; +} + +static void rt711_get_gain(struct rt711_priv *rt711, unsigned int addr_h, + unsigned int addr_l, unsigned int val_h, + unsigned int *r_val, unsigned int *l_val) +{ + /* R Channel */ + *r_val = (val_h << 8); + regmap_read(rt711->regmap, addr_l, r_val); + + /* L Channel */ + val_h |= 0x20; + *l_val = (val_h << 8); + regmap_read(rt711->regmap, addr_h, l_val); +} + +/* For Verb-Set Amplifier Gain (Verb ID = 3h) */ +static int rt711_set_amp_gain_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + unsigned int addr_h, addr_l, val_h, val_ll, val_lr; + unsigned int read_ll, read_rl; + int i; + + /* Can't use update bit function, so read the original value first */ + addr_h = mc->reg; + addr_l = mc->rreg; + if (mc->shift == RT711_DIR_OUT_SFT) /* output */ + val_h = 0x80; + else /* input */ + val_h = 0x0; + + rt711_get_gain(rt711, addr_h, addr_l, val_h, &read_rl, &read_ll); + + /* L Channel */ + if (mc->invert) { + /* for mute/unmute */ + val_ll = (mc->max - ucontrol->value.integer.value[0]) + << RT711_MUTE_SFT; + /* keep gain */ + read_ll = read_ll & 0x7f; + val_ll |= read_ll; + } else { + /* for gain */ + val_ll = ((ucontrol->value.integer.value[0]) & 0x7f); + if (val_ll > mc->max) + val_ll = mc->max; + /* keep mute status */ + read_ll = read_ll & (1 << RT711_MUTE_SFT); + val_ll |= read_ll; + } + + if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D0); + + /* R Channel */ + if (mc->invert) { + /* for mute/unmute */ + val_lr = (mc->max - ucontrol->value.integer.value[1]) + << RT711_MUTE_SFT; + /* keep gain */ + read_rl = read_rl & 0x7f; + val_lr |= read_rl; + } else { + /* for gain */ + val_lr = ((ucontrol->value.integer.value[1]) & 0x7f); + if (val_lr > mc->max) + val_lr = mc->max; + /* keep mute status */ + read_rl = read_rl & (1 << RT711_MUTE_SFT); + val_lr |= read_rl; + } + + for (i = 0; i < 3; i++) { /* retry 3 times at most */ + + if (val_ll == val_lr) { + /* Set both L/R channels at the same time */ + val_h = (1 << mc->shift) | (3 << 4); + regmap_write(rt711->regmap, + addr_h, (val_h << 8 | val_ll)); + regmap_write(rt711->regmap, + addr_l, (val_h << 8 | val_ll)); + } else { + /* Lch*/ + val_h = (1 << mc->shift) | (1 << 5); + regmap_write(rt711->regmap, + addr_h, (val_h << 8 | val_ll)); + + /* Rch */ + val_h = (1 << mc->shift) | (1 << 4); + regmap_write(rt711->regmap, + addr_l, (val_h << 8 | val_lr)); + } + /* check result */ + if (mc->shift == RT711_DIR_OUT_SFT) /* output */ + val_h = 0x80; + else /* input */ + val_h = 0x0; + + rt711_get_gain(rt711, addr_h, addr_l, val_h, + &read_rl, &read_ll); + if (read_rl == val_lr && read_ll == val_ll) + break; + } + + if (dapm->bias_level <= SND_SOC_BIAS_STANDBY) + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D3); + return 0; +} + +static int rt711_set_amp_gain_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + unsigned int addr_h, addr_l, val_h; + unsigned int read_ll, read_rl; + + /* switch to get command */ + addr_h = mc->reg; + addr_l = mc->rreg; + if (mc->shift == RT711_DIR_OUT_SFT) /* output */ + val_h = 0x80; + else /* input */ + val_h = 0x0; + + rt711_get_gain(rt711, addr_h, addr_l, val_h, &read_rl, &read_ll); + + if (mc->invert) { + /* mute/unmute for switch controls */ + read_ll = !((read_ll & 0x80) >> RT711_MUTE_SFT); + read_rl = !((read_rl & 0x80) >> RT711_MUTE_SFT); + } else { + /* for gain volume controls */ + read_ll = read_ll & 0x7f; + read_rl = read_rl & 0x7f; + } + ucontrol->value.integer.value[0] = read_ll; + ucontrol->value.integer.value[1] = read_rl; + + return 0; +} + +static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -6525, 75, 0); +static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -1725, 75, 0); +static const DECLARE_TLV_DB_SCALE(mic_vol_tlv, 0, 1000, 0); + +static const struct snd_kcontrol_new rt711_snd_controls[] = { + SOC_DOUBLE_R_EXT_TLV("DAC Surr Playback Volume", + RT711_SET_GAIN_DAC2_H, RT711_SET_GAIN_DAC2_L, + RT711_DIR_OUT_SFT, 0x57, 0, + rt711_set_amp_gain_get, rt711_set_amp_gain_put, out_vol_tlv), + SOC_DOUBLE_R_EXT("ADC 08 Capture Switch", + RT711_SET_GAIN_ADC2_H, RT711_SET_GAIN_ADC2_L, + RT711_DIR_IN_SFT, 1, 1, + rt711_set_amp_gain_get, rt711_set_amp_gain_put), + SOC_DOUBLE_R_EXT("ADC 09 Capture Switch", + RT711_SET_GAIN_ADC1_H, RT711_SET_GAIN_ADC1_L, + RT711_DIR_IN_SFT, 1, 1, + rt711_set_amp_gain_get, rt711_set_amp_gain_put), + SOC_DOUBLE_R_EXT_TLV("ADC 08 Capture Volume", + RT711_SET_GAIN_ADC2_H, RT711_SET_GAIN_ADC2_L, + RT711_DIR_IN_SFT, 0x3f, 0, + rt711_set_amp_gain_get, rt711_set_amp_gain_put, in_vol_tlv), + SOC_DOUBLE_R_EXT_TLV("ADC 09 Capture Volume", + RT711_SET_GAIN_ADC1_H, RT711_SET_GAIN_ADC1_L, + RT711_DIR_IN_SFT, 0x3f, 0, + rt711_set_amp_gain_get, rt711_set_amp_gain_put, in_vol_tlv), + SOC_DOUBLE_R_EXT_TLV("AMIC Volume", + RT711_SET_GAIN_AMIC_H, RT711_SET_GAIN_AMIC_L, + RT711_DIR_IN_SFT, 3, 0, + rt711_set_amp_gain_get, rt711_set_amp_gain_put, mic_vol_tlv), + SOC_DOUBLE_R_EXT_TLV("DMIC1 Volume", + RT711_SET_GAIN_DMIC1_H, RT711_SET_GAIN_DMIC1_L, + RT711_DIR_IN_SFT, 3, 0, + rt711_set_amp_gain_get, rt711_set_amp_gain_put, mic_vol_tlv), + SOC_DOUBLE_R_EXT_TLV("DMIC2 Volume", + RT711_SET_GAIN_DMIC2_H, RT711_SET_GAIN_DMIC2_L, + RT711_DIR_IN_SFT, 3, 0, + rt711_set_amp_gain_get, rt711_set_amp_gain_put, mic_vol_tlv), +}; + +static int rt711_mux_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_dapm_kcontrol_component(kcontrol); + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + unsigned int reg, val = 0, nid; + int ret; + + if (strstr(ucontrol->id.name, "ADC 22 Mux")) + nid = RT711_MIXER_IN1; + else if (strstr(ucontrol->id.name, "ADC 23 Mux")) + nid = RT711_MIXER_IN2; + else + return -EINVAL; + + /* vid = 0xf01 */ + reg = RT711_VERB_SET_CONNECT_SEL | nid; + ret = regmap_read(rt711->regmap, reg, &val); + if (ret < 0) { + dev_err(component->dev, "%s: sdw read failed: %d\n", + __func__, ret); + return ret; + } + + ucontrol->value.enumerated.item[0] = val; + + return 0; +} + +static int rt711_mux_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_dapm_kcontrol_component(kcontrol); + struct snd_soc_dapm_context *dapm = + snd_soc_dapm_kcontrol_dapm(kcontrol); + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; + unsigned int *item = ucontrol->value.enumerated.item; + unsigned int val, val2 = 0, change, reg, nid; + int ret; + + if (item[0] >= e->items) + return -EINVAL; + + if (strstr(ucontrol->id.name, "ADC 22 Mux")) + nid = RT711_MIXER_IN1; + else if (strstr(ucontrol->id.name, "ADC 23 Mux")) + nid = RT711_MIXER_IN2; + else + return -EINVAL; + + /* Verb ID = 0x701h */ + val = snd_soc_enum_item_to_val(e, item[0]) << e->shift_l; + + reg = RT711_VERB_SET_CONNECT_SEL | nid; + ret = regmap_read(rt711->regmap, reg, &val2); + if (ret < 0) { + dev_err(component->dev, "%s: sdw read failed: %d\n", + __func__, ret); + return ret; + } + + if (val == val2) + change = 0; + else + change = 1; + + if (change) { + reg = RT711_VERB_SET_CONNECT_SEL | nid; + regmap_write(rt711->regmap, reg, val); + } + + snd_soc_dapm_mux_update_power(dapm, kcontrol, + item[0], e, NULL); + + return change; +} + +static const char * const adc_mux_text[] = { + "MIC2", + "LINE1", + "LINE2", + "DMIC", +}; + +static SOC_ENUM_SINGLE_DECL( + rt711_adc22_enum, SND_SOC_NOPM, 0, adc_mux_text); + +static SOC_ENUM_SINGLE_DECL( + rt711_adc23_enum, SND_SOC_NOPM, 0, adc_mux_text); + +static const struct snd_kcontrol_new rt711_adc22_mux = + SOC_DAPM_ENUM_EXT("ADC 22 Mux", rt711_adc22_enum, + rt711_mux_get, rt711_mux_put); + +static const struct snd_kcontrol_new rt711_adc23_mux = + SOC_DAPM_ENUM_EXT("ADC 23 Mux", rt711_adc23_enum, + rt711_mux_get, rt711_mux_put); + +static int rt711_dac_surround_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + unsigned int val_h = (1 << RT711_DIR_OUT_SFT) | (0x3 << 4); + unsigned int val_l; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_write(rt711->regmap, + RT711_SET_STREAMID_DAC2, 0x10); + + val_l = 0x00; + regmap_write(rt711->regmap, + RT711_SET_GAIN_HP_H, (val_h << 8 | val_l)); + break; + case SND_SOC_DAPM_PRE_PMD: + val_l = (1 << RT711_MUTE_SFT); + regmap_write(rt711->regmap, + RT711_SET_GAIN_HP_H, (val_h << 8 | val_l)); + usleep_range(50000, 55000); + + regmap_write(rt711->regmap, + RT711_SET_STREAMID_DAC2, 0x00); + break; + } + return 0; +} + +static int rt711_adc_09_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_write(rt711->regmap, + RT711_SET_STREAMID_ADC1, 0x10); + break; + case SND_SOC_DAPM_PRE_PMD: + regmap_write(rt711->regmap, + RT711_SET_STREAMID_ADC1, 0x00); + break; + } + return 0; +} + +static int rt711_adc_08_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + regmap_write(rt711->regmap, + RT711_SET_STREAMID_ADC2, 0x10); + break; + case SND_SOC_DAPM_PRE_PMD: + regmap_write(rt711->regmap, + RT711_SET_STREAMID_ADC2, 0x00); + break; + } + return 0; +} + +static const struct snd_soc_dapm_widget rt711_dapm_widgets[] = { + SND_SOC_DAPM_OUTPUT("HP"), + SND_SOC_DAPM_INPUT("MIC2"), + SND_SOC_DAPM_INPUT("DMIC1"), + SND_SOC_DAPM_INPUT("DMIC2"), + SND_SOC_DAPM_INPUT("LINE1"), + SND_SOC_DAPM_INPUT("LINE2"), + + SND_SOC_DAPM_DAC_E("DAC Surround", NULL, SND_SOC_NOPM, 0, 0, + rt711_dac_surround_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_ADC_E("ADC 09", NULL, SND_SOC_NOPM, 0, 0, + rt711_adc_09_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_ADC_E("ADC 08", NULL, SND_SOC_NOPM, 0, 0, + rt711_adc_08_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_MUX("ADC 22 Mux", SND_SOC_NOPM, 0, 0, + &rt711_adc22_mux), + SND_SOC_DAPM_MUX("ADC 23 Mux", SND_SOC_NOPM, 0, 0, + &rt711_adc23_mux), + + SND_SOC_DAPM_AIF_IN("DP3RX", "DP3 Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP2TX", "DP2 Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DP4TX", "DP4 Capture", 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route rt711_audio_map[] = { + {"DAC Surround", NULL, "DP3RX"}, + {"DP2TX", NULL, "ADC 09"}, + {"DP4TX", NULL, "ADC 08"}, + + {"ADC 09", NULL, "ADC 22 Mux"}, + {"ADC 08", NULL, "ADC 23 Mux"}, + {"ADC 22 Mux", "DMIC", "DMIC1"}, + {"ADC 22 Mux", "LINE1", "LINE1"}, + {"ADC 22 Mux", "LINE2", "LINE2"}, + {"ADC 22 Mux", "MIC2", "MIC2"}, + {"ADC 23 Mux", "DMIC", "DMIC2"}, + {"ADC 23 Mux", "LINE1", "LINE1"}, + {"ADC 23 Mux", "LINE2", "LINE2"}, + {"ADC 23 Mux", "MIC2", "MIC2"}, + + {"HP", NULL, "DAC Surround"}, +}; + +static int rt711_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(component); + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + + switch (level) { + case SND_SOC_BIAS_PREPARE: + if (dapm->bias_level == SND_SOC_BIAS_STANDBY) { + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, + AC_PWRST_D0); + } + break; + + case SND_SOC_BIAS_STANDBY: + regmap_write(rt711->regmap, + RT711_SET_AUDIO_POWER_STATE, + AC_PWRST_D3); + break; + + default: + break; + } + + return 0; +} + +static int rt711_parse_dt(struct rt711_priv *rt711, struct device *dev) +{ + device_property_read_u32(dev, "realtek,jd-src", + &rt711->jd_src); + + return 0; +} + +static int rt711_probe(struct snd_soc_component *component) +{ + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + + rt711_parse_dt(rt711, &rt711->slave->dev); + rt711->component = component; + + return 0; +} + +static const struct snd_soc_component_driver soc_codec_dev_rt711 = { + .probe = rt711_probe, + .set_bias_level = rt711_set_bias_level, + .controls = rt711_snd_controls, + .num_controls = ARRAY_SIZE(rt711_snd_controls), + .dapm_widgets = rt711_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt711_dapm_widgets), + .dapm_routes = rt711_audio_map, + .num_dapm_routes = ARRAY_SIZE(rt711_audio_map), + .set_jack = rt711_set_jack_detect, +}; + +static int rt711_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, + int direction) +{ + struct sdw_stream_data *stream; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) + return -ENOMEM; + + stream->sdw_stream = (struct sdw_stream_runtime *)sdw_stream; + + /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + dai->playback_dma_data = stream; + else + dai->capture_dma_data = stream; + + return 0; +} + +static void rt711_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sdw_stream_data *stream; + + stream = snd_soc_dai_get_dma_data(dai, substream); + snd_soc_dai_set_dma_data(dai, substream, NULL); + kfree(stream); +} + +static int rt711_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config; + struct sdw_port_config port_config; + enum sdw_data_direction direction; + struct sdw_stream_data *stream; + int retval, port, num_channels; + unsigned int val = 0; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!stream) + return -EINVAL; + + if (!rt711->slave) + return -EINVAL; + + /* SoundWire specific configuration */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + direction = SDW_DATA_DIR_RX; + port = 3; + } else { + direction = SDW_DATA_DIR_TX; + if (dai->id == RT711_AIF1) + port = 4; + else if (dai->id == RT711_AIF2) + port = 2; + else + return -EINVAL; + } + + stream_config.frame_rate = params_rate(params); + stream_config.ch_count = params_channels(params); + stream_config.bps = snd_pcm_format_width(params_format(params)); + stream_config.direction = direction; + + num_channels = params_channels(params); + port_config.ch_mask = (1 << (num_channels)) - 1; + port_config.num = port; + + retval = sdw_stream_add_slave(rt711->slave, &stream_config, + &port_config, 1, stream->sdw_stream); + if (retval) { + dev_err(dai->dev, "Unable to configure port\n"); + return retval; + } + + if (params_channels(params) <= 16) { + /* bit 3:0 Number of Channel */ + val |= (params_channels(params) - 1); + } else { + dev_err(component->dev, "Unsupported channels %d\n", + params_channels(params)); + return -EINVAL; + } + + switch (params_width(params)) { + /* bit 6:4 Bits per Sample */ + case 8: + break; + case 16: + val |= (0x1 << 4); + break; + case 20: + val |= (0x2 << 4); + break; + case 24: + val |= (0x3 << 4); + break; + case 32: + val |= (0x4 << 4); + break; + default: + return -EINVAL; + } + + /* 48Khz */ + regmap_write(rt711->regmap, RT711_DAC_FORMAT_H, val); + regmap_write(rt711->regmap, RT711_ADC1_FORMAT_H, val); + regmap_write(rt711->regmap, RT711_ADC2_FORMAT_H, val); + + return retval; +} + +static int rt711_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component); + struct sdw_stream_data *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!rt711->slave) + return -EINVAL; + + sdw_stream_remove_slave(rt711->slave, stream->sdw_stream); + return 0; +} + +#define RT711_STEREO_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) +#define RT711_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) + +static struct snd_soc_dai_ops rt711_ops = { + .hw_params = rt711_pcm_hw_params, + .hw_free = rt711_pcm_hw_free, + .set_sdw_stream = rt711_set_sdw_stream, + .shutdown = rt711_shutdown, +}; + +static struct snd_soc_dai_driver rt711_dai[] = { + { + .name = "rt711-aif1", + .id = RT711_AIF1, + .playback = { + .stream_name = "DP3 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT711_STEREO_RATES, + .formats = RT711_FORMATS, + }, + .capture = { + .stream_name = "DP4 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT711_STEREO_RATES, + .formats = RT711_FORMATS, + }, + .ops = &rt711_ops, + }, + { + .name = "rt711-aif2", + .id = RT711_AIF2, + .capture = { + .stream_name = "DP2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT711_STEREO_RATES, + .formats = RT711_FORMATS, + }, + .ops = &rt711_ops, + } +}; + +/* Bus clock frequency */ +#define RT711_CLK_FREQ_9600000HZ 9600000 +#define RT711_CLK_FREQ_12000000HZ 12000000 +#define RT711_CLK_FREQ_6000000HZ 6000000 +#define RT711_CLK_FREQ_4800000HZ 4800000 +#define RT711_CLK_FREQ_2400000HZ 2400000 +#define RT711_CLK_FREQ_12288000HZ 12288000 + +int rt711_clock_config(struct device *dev) +{ + struct rt711_priv *rt711 = dev_get_drvdata(dev); + unsigned int clk_freq, value; + + clk_freq = (rt711->params.curr_dr_freq >> 1); + + switch (clk_freq) { + case RT711_CLK_FREQ_12000000HZ: + value = 0x0; + break; + case RT711_CLK_FREQ_6000000HZ: + value = 0x1; + break; + case RT711_CLK_FREQ_9600000HZ: + value = 0x2; + break; + case RT711_CLK_FREQ_4800000HZ: + value = 0x3; + break; + case RT711_CLK_FREQ_2400000HZ: + value = 0x4; + break; + case RT711_CLK_FREQ_12288000HZ: + value = 0x5; + break; + default: + return -EINVAL; + } + + regmap_write(rt711->regmap, 0xe0, value); + regmap_write(rt711->regmap, 0xf0, value); + + dev_dbg(dev, "%s complete, clk_freq=%d\n", __func__, clk_freq); + + return 0; +} + +static void rt711_calibration_work(struct work_struct *work) +{ + struct rt711_priv *rt711 = + container_of(work, struct rt711_priv, calibration_work); + + rt711_calibration(rt711); +} + +int rt711_init(struct device *dev, struct regmap *sdw_regmap, + struct regmap *regmap, struct sdw_slave *slave) +{ + struct rt711_priv *rt711; + int ret; + + rt711 = devm_kzalloc(dev, sizeof(*rt711), GFP_KERNEL); + if (!rt711) + return -ENOMEM; + + dev_set_drvdata(dev, rt711); + rt711->slave = slave; + rt711->sdw_regmap = sdw_regmap; + rt711->regmap = regmap; + + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + rt711->hw_init = false; + rt711->first_hw_init = false; + + /* JD source uses JD2 in default */ + rt711->jd_src = RT711_JD2; + + ret = devm_snd_soc_register_component(dev, + &soc_codec_dev_rt711, + rt711_dai, + ARRAY_SIZE(rt711_dai)); + + dev_dbg(&slave->dev, "%s\n", __func__); + + return ret; +} + +int rt711_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct rt711_priv *rt711 = dev_get_drvdata(dev); + + if (rt711->hw_init) + return 0; + + if (rt711->first_hw_init) { + regcache_cache_only(rt711->regmap, false); + regcache_cache_bypass(rt711->regmap, true); + } + + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + if (!rt711->first_hw_init) { + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(&slave->dev, 3000); + pm_runtime_use_autosuspend(&slave->dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(&slave->dev); + + pm_runtime_enable(&slave->dev); + } + + pm_runtime_get_noresume(&slave->dev); + + rt711_reset(rt711->regmap); + + /* power on */ + regmap_write(rt711->regmap, RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D0); + + /* Set Pin Widget */ + regmap_write(rt711->regmap, RT711_SET_PIN_MIC2, 0x25); + regmap_write(rt711->regmap, RT711_SET_PIN_HP, 0xc0); + regmap_write(rt711->regmap, RT711_SET_PIN_DMIC1, 0x20); + regmap_write(rt711->regmap, RT711_SET_PIN_DMIC2, 0x20); + regmap_write(rt711->regmap, RT711_SET_PIN_LINE1, 0x20); + regmap_write(rt711->regmap, RT711_SET_PIN_LINE2, 0x20); + + /* Mute HP/ADC1/ADC2 */ + regmap_write(rt711->regmap, RT711_SET_GAIN_HP_H, 0xa080); + regmap_write(rt711->regmap, RT711_SET_GAIN_HP_H, 0x9080); + regmap_write(rt711->regmap, RT711_SET_GAIN_ADC2_H, 0x6080); + regmap_write(rt711->regmap, RT711_SET_GAIN_ADC2_H, 0x5080); + regmap_write(rt711->regmap, RT711_SET_GAIN_ADC1_H, 0x6080); + regmap_write(rt711->regmap, RT711_SET_GAIN_ADC1_H, 0x5080); + + /* Set Configuration Default */ + regmap_write(rt711->regmap, 0x4f12, 0x91); + regmap_write(rt711->regmap, 0x4e12, 0xd6); + regmap_write(rt711->regmap, 0x4d12, 0x11); + regmap_write(rt711->regmap, 0x4c12, 0x20); + regmap_write(rt711->regmap, 0x4f13, 0x91); + regmap_write(rt711->regmap, 0x4e13, 0xd6); + regmap_write(rt711->regmap, 0x4d13, 0x11); + regmap_write(rt711->regmap, 0x4c13, 0x21); + regmap_write(rt711->regmap, 0x4c21, 0xf0); + regmap_write(rt711->regmap, 0x4d21, 0x11); + regmap_write(rt711->regmap, 0x4e21, 0x11); + regmap_write(rt711->regmap, 0x4f21, 0x01); + + /* Data port arrangement */ + rt711_index_write(rt711->regmap, RT711_VENDOR_REG, + RT711_TX_RX_MUX_CTL, 0x0154); + + /* Set index */ + rt711_index_write(rt711->regmap, RT711_VENDOR_REG, + RT711_DIGITAL_MISC_CTRL4, 0x201b); + rt711_index_write(rt711->regmap, RT711_VENDOR_REG, + RT711_COMBO_JACK_AUTO_CTL1, 0x5089); + rt711_index_write(rt711->regmap, RT711_VENDOR_REG, + RT711_VREFOUT_CTL, 0x5064); + rt711_index_write(rt711->regmap, RT711_VENDOR_REG, + RT711_INLINE_CMD_CTL, 0xd249); + + /* Finish Initial Settings, set power to D3 */ + regmap_write(rt711->regmap, RT711_SET_AUDIO_POWER_STATE, AC_PWRST_D3); + + if (rt711->first_hw_init) + rt711_calibration(rt711); + else { + INIT_DELAYED_WORK(&rt711->jack_detect_work, + rt711_jack_detect_handler); + INIT_DELAYED_WORK(&rt711->jack_btn_check_work, + rt711_btn_check_handler); + mutex_init(&rt711->calibrate_mutex); + INIT_WORK(&rt711->calibration_work, rt711_calibration_work); + schedule_work(&rt711->calibration_work); + } + + /* + * if set_jack callback occurred early than io_init, + * we set up the jack detection function now + */ + if (rt711->hs_jack) + rt711_jack_init(rt711); + + if (rt711->first_hw_init) { + regcache_cache_bypass(rt711->regmap, false); + regcache_mark_dirty(rt711->regmap); + } else + rt711->first_hw_init = true; + + /* Mark Slave initialization complete */ + rt711->hw_init = true; + + pm_runtime_mark_last_busy(&slave->dev); + pm_runtime_put_autosuspend(&slave->dev); + + dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); + return 0; +} + +MODULE_DESCRIPTION("ASoC RT711 SDW driver"); +MODULE_AUTHOR("Shuming Fan <shumingf(a)realtek.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/rt711.h b/sound/soc/codecs/rt711.h new file mode 100644 index 000000000000..ca0f581feec7 --- /dev/null +++ b/sound/soc/codecs/rt711.h @@ -0,0 +1,227 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * rt711.h -- RT711 ALSA SoC audio driver header + * + * Copyright(c) 2019 Realtek Semiconductor Corp. + */ + +#ifndef __RT711_H__ +#define __RT711_H__ + +extern const struct dev_pm_ops rt711_runtime_pm; + +struct rt711_priv { + struct regmap *regmap; + struct regmap *sdw_regmap; + struct snd_soc_component *component; + struct sdw_slave *slave; + enum sdw_slave_status status; + struct sdw_bus_params params; + bool hw_init; + bool first_hw_init; + struct snd_soc_jack *hs_jack; + struct delayed_work jack_detect_work; + struct delayed_work jack_btn_check_work; + struct work_struct calibration_work; + struct mutex calibrate_mutex; /* for headset calibration */ + int jack_type, jd_src; +}; + +struct sdw_stream_data { + struct sdw_stream_runtime *sdw_stream; +}; + +/* NID */ +#define RT711_AUDIO_FUNCTION_GROUP 0x01 +#define RT711_DAC_OUT2 0x03 +#define RT711_ADC_IN1 0x09 +#define RT711_ADC_IN2 0x08 +#define RT711_DMIC1 0x12 +#define RT711_DMIC2 0x13 +#define RT711_MIC2 0x19 +#define RT711_LINE1 0x1a +#define RT711_LINE2 0x1b +#define RT711_BEEP 0x1d +#define RT711_VENDOR_REG 0x20 +#define RT711_HP_OUT 0x21 +#define RT711_MIXER_IN1 0x22 +#define RT711_MIXER_IN2 0x23 +#define RT711_INLINE_CMD 0x55 +#define RT711_VENDOR_CALI 0x58 +#define RT711_VENDOR_IMS_DRE 0x5b + +/* Index (NID:20h) */ +#define RT711_DAC_DC_CALI_CTL1 0x00 +#define RT711_JD_CTL2 0x09 +#define RT711_CC_DET1 0x11 +#define RT711_PARA_VERB_CTL 0x1a +#define RT711_COMBO_JACK_AUTO_CTL1 0x45 +#define RT711_COMBO_JACK_AUTO_CTL2 0x46 +#define RT711_INLINE_CMD_CTL 0x48 +#define RT711_DIGITAL_MISC_CTRL4 0x4a +#define RT711_VREFOUT_CTL 0x6b +#define RT711_FSM_CTL 0x6f +#define RT711_IRQ_FLAG_TABLE1 0x80 +#define RT711_IRQ_FLAG_TABLE2 0x81 +#define RT711_IRQ_FLAG_TABLE3 0x82 +#define RT711_TX_RX_MUX_CTL 0x91 + +/* Index (NID:5bh) */ +#define RT711_IMS_DIGITAL_CTL1 0x00 +#define RT711_HP_IMS_RESULT_L 0x20 +#define RT711_HP_IMS_RESULT_R 0x21 + +/* Verb */ +#define RT711_VERB_SET_CONNECT_SEL 0x3100 +#define RT711_VERB_SET_EAPD_BTLENABLE 0x3c00 +#define RT711_VERB_GET_CONNECT_SEL 0xb100 +#define RT711_VERB_SET_POWER_STATE 0x3500 +#define RT711_VERB_SET_CHANNEL_STREAMID 0x3600 +#define RT711_VERB_SET_PIN_WIDGET_CONTROL 0x3700 +#define RT711_VERB_SET_UNSOLICITED_ENABLE 0x3800 +#define RT711_SET_AMP_GAIN_MUTE_H 0x7300 +#define RT711_SET_AMP_GAIN_MUTE_L 0x8380 +#define RT711_VERB_GET_POWER_STATE 0xb500 +#define RT711_VERB_GET_CHANNEL_STREAMID 0xb600 +#define RT711_VERB_GET_PIN_SENSE 0xb900 +#define RT711_FUNC_RESET 0xff01 + +#define RT711_READ_HDA_3 0x2012 +#define RT711_READ_HDA_2 0x2013 +#define RT711_READ_HDA_1 0x2014 +#define RT711_READ_HDA_0 0x2015 +#define RT711_PRIV_INDEX_W_H 0x7500 +#define RT711_PRIV_INDEX_W_L 0x8580 +#define RT711_PRIV_DATA_W_H 0x7400 +#define RT711_PRIV_DATA_W_L 0x8480 +#define RT711_PRIV_INDEX_R_H 0x9d00 +#define RT711_PRIV_INDEX_R_L 0xad80 +#define RT711_PRIV_DATA_R_H 0x9c00 +#define RT711_PRIV_DATA_R_L 0xac80 +#define RT711_DAC_FORMAT_H 0x7203 +#define RT711_DAC_FORMAT_L 0x8283 +#define RT711_ADC1_FORMAT_H 0x7209 +#define RT711_ADC1_FORMAT_L 0x8289 +#define RT711_ADC2_FORMAT_H 0x7208 +#define RT711_ADC2_FORMAT_L 0x8288 + +#define RT711_SET_AUDIO_POWER_STATE\ + (RT711_VERB_SET_POWER_STATE | RT711_AUDIO_FUNCTION_GROUP) +#define RT711_GET_AUDIO_POWER_STATE\ + (RT711_VERB_GET_POWER_STATE | RT711_AUDIO_FUNCTION_GROUP) +#define RT711_SET_PIN_DMIC1\ + (RT711_VERB_SET_PIN_WIDGET_CONTROL | RT711_DMIC1) +#define RT711_SET_PIN_DMIC2\ + (RT711_VERB_SET_PIN_WIDGET_CONTROL | RT711_DMIC2) +#define RT711_SET_PIN_HP\ + (RT711_VERB_SET_PIN_WIDGET_CONTROL | RT711_HP_OUT) +#define RT711_SET_PIN_MIC2\ + (RT711_VERB_SET_PIN_WIDGET_CONTROL | RT711_MIC2) +#define RT711_SET_PIN_LINE1\ + (RT711_VERB_SET_PIN_WIDGET_CONTROL | RT711_LINE1) +#define RT711_SET_PIN_LINE2\ + (RT711_VERB_SET_PIN_WIDGET_CONTROL | RT711_LINE2) +#define RT711_SET_MIC2_UNSOLICITED_ENABLE\ + (RT711_VERB_SET_UNSOLICITED_ENABLE | RT711_MIC2) +#define RT711_SET_HP_UNSOLICITED_ENABLE\ + (RT711_VERB_SET_UNSOLICITED_ENABLE | RT711_HP_OUT) +#define RT711_SET_INLINE_UNSOLICITED_ENABLE\ + (RT711_VERB_SET_UNSOLICITED_ENABLE | RT711_INLINE_CMD) +#define RT711_SET_STREAMID_DAC2\ + (RT711_VERB_SET_CHANNEL_STREAMID | RT711_DAC_OUT2) +#define RT711_SET_STREAMID_ADC1\ + (RT711_VERB_SET_CHANNEL_STREAMID | RT711_ADC_IN1) +#define RT711_SET_STREAMID_ADC2\ + (RT711_VERB_SET_CHANNEL_STREAMID | RT711_ADC_IN2) +#define RT711_GET_STREAMID_DAC2\ + (RT711_VERB_GET_CHANNEL_STREAMID | RT711_DAC_OUT2) +#define RT711_GET_STREAMID_ADC1\ + (RT711_VERB_GET_CHANNEL_STREAMID | RT711_ADC_IN1) +#define RT711_GET_STREAMID_ADC2\ + (RT711_VERB_GET_CHANNEL_STREAMID | RT711_ADC_IN2) +#define RT711_SET_GAIN_DAC2_L\ + (RT711_SET_AMP_GAIN_MUTE_L | RT711_DAC_OUT2) +#define RT711_SET_GAIN_DAC2_H\ + (RT711_SET_AMP_GAIN_MUTE_H | RT711_DAC_OUT2) +#define RT711_SET_GAIN_ADC1_L\ + (RT711_SET_AMP_GAIN_MUTE_L | RT711_ADC_IN1) +#define RT711_SET_GAIN_ADC1_H\ + (RT711_SET_AMP_GAIN_MUTE_H | RT711_ADC_IN1) +#define RT711_SET_GAIN_ADC2_L\ + (RT711_SET_AMP_GAIN_MUTE_L | RT711_ADC_IN2) +#define RT711_SET_GAIN_ADC2_H\ + (RT711_SET_AMP_GAIN_MUTE_H | RT711_ADC_IN2) +#define RT711_SET_GAIN_AMIC_L\ + (RT711_SET_AMP_GAIN_MUTE_L | RT711_MIC2) +#define RT711_SET_GAIN_AMIC_H\ + (RT711_SET_AMP_GAIN_MUTE_H | RT711_MIC2) +#define RT711_SET_GAIN_DMIC1_L\ + (RT711_SET_AMP_GAIN_MUTE_L | RT711_DMIC1) +#define RT711_SET_GAIN_DMIC1_H\ + (RT711_SET_AMP_GAIN_MUTE_H | RT711_DMIC1) +#define RT711_SET_GAIN_DMIC2_L\ + (RT711_SET_AMP_GAIN_MUTE_L | RT711_DMIC2) +#define RT711_SET_GAIN_DMIC2_H\ + (RT711_SET_AMP_GAIN_MUTE_H | RT711_DMIC2) +#define RT711_SET_GAIN_HP_L\ + (RT711_SET_AMP_GAIN_MUTE_L | RT711_HP_OUT) +#define RT711_SET_GAIN_HP_H\ + (RT711_SET_AMP_GAIN_MUTE_H | RT711_HP_OUT) + +/* DAC DC offset calibration control-1 (0x00)(NID:20h) */ +#define RT711_DAC_DC_CALI_TRIGGER (0x1 << 15) + +/* jack detect control 2 (0x09)(NID:20h) */ +#define RT711_JD2_2PORT_200K_DECODE_HP (0x1 << 13) +#define RT711_HP_JD_SEL_JD1 (0x0 << 1) +#define RT711_HP_JD_SEL_JD2 (0x1 << 1) + +/* CC DET1 (0x11)(NID:20h) */ +#define RT711_HP_JD_FINAL_RESULT_CTL_JD12 (0x1 << 10) +#define RT711_HP_JD_FINAL_RESULT_CTL_CCDET (0x0 << 10) + +/* Parameter & Verb control (0x1a)(NID:20h) */ +#define RT711_HIDDEN_REG_SW_RESET (0x1 << 14) + +/* combo jack auto switch control 2 (0x46)(NID:20h) */ +#define RT711_COMBOJACK_AUTO_DET_STATUS (0x1 << 11) +#define RT711_COMBOJACK_AUTO_DET_TRS (0x1 << 10) +#define RT711_COMBOJACK_AUTO_DET_CTIA (0x1 << 9) +#define RT711_COMBOJACK_AUTO_DET_OMTP (0x1 << 8) + +/* FSM control (0x6f)(NID:20h) */ +#define RT711_CALI_CTL (0x0 << 0) +#define RT711_COMBOJACK_CTL (0x1 << 0) +#define RT711_IMS_CTL (0x2 << 0) +#define RT711_DEPOP_CTL (0x3 << 0) + +/* Impedance Sense Digital Control 1 (0x00)(NID:5bh) */ +#define RT711_TRIGGER_IMS (0x1 << 15) +#define RT711_IMS_EN (0x1 << 6) + +#define RT711_EAPD_HIGH 0x2 +#define RT711_EAPD_LOW 0x0 +#define RT711_MUTE_SFT 7 +/* set input/output mapping to payload[14][15] separately */ +#define RT711_DIR_IN_SFT 6 +#define RT711_DIR_OUT_SFT 7 + +enum { + RT711_AIF1, + RT711_AIF2, + RT711_AIFS, +}; + +enum rt711_jd_src { + RT711_JD_NULL, + RT711_JD1, + RT711_JD2 +}; + +int rt711_io_init(struct device *dev, struct sdw_slave *slave); +int rt711_init(struct device *dev, struct regmap *sdw_regmap, + struct regmap *regmap, struct sdw_slave *slave); + +int rt711_jack_detect(struct rt711_priv *rt711, bool *hp, bool *mic); +int rt711_clock_config(struct device *dev); +#endif /* __RT711_H__ */ -- 2.24.1

3 2

[alsa-devel] [PATCH v2] ASoC: max98090: save and restore SHDN when changing sensitive registers
by Tzung-Bi Shih 09 Jan '20

09 Jan '20

According to the datasheet, there are some registers can only be changed when SHDN is 0. Changing these settings during SHDN = 1 can compromise device stability and performance specifications. Saves SHDN before writing to these sensitive registers and restores SHDN afterward. Here is the register list codec driver of max98090 wants to change: M98090_REG_QUICK_SYSTEM_CLOCK 0x04 M98090_REG_QUICK_SAMPLE_RATE 0x05 M98090_REG_DAI_INTERFACE 0x06 M98090_REG_DAC_PATH 0x07 M98090_REG_MIC_DIRECT_TO_ADC 0x08 M98090_REG_LINE_TO_ADC 0x09 M98090_REG_ANALOG_MIC_LOOP 0x0A M98090_REG_ANALOG_LINE_LOOP 0x0B M98090_REG_SYSTEM_CLOCK 0x1B M98090_REG_CLOCK_MODE 0x1C M98090_REG_CLOCK_RATIO_NI_MSB 0x1D M98090_REG_CLOCK_RATIO_NI_LSB 0x1E M98090_REG_CLOCK_RATIO_MI_MSB 0x1F M98090_REG_CLOCK_RATIO_MI_LSB 0x20 M98090_REG_MASTER_MODE 0x21 M98090_REG_INTERFACE_FORMAT 0x22 M98090_REG_TDM_CONTROL 0x23 M98090_REG_TDM_FORMAT 0x24 M98090_REG_IO_CONFIGURATION 0x25 M98090_REG_FILTER_CONFIG 0x26 M98090_REG_INPUT_ENABLE 0x3E M98090_REG_OUTPUT_ENABLE 0x3F M98090_REG_BIAS_CONTROL 0x42 M98090_REG_DAC_CONTROL 0x43 M98090_REG_ADC_CONTROL 0x44 M98090_REG_DRC_TIMING 0x33 M98090_REG_DRC_COMPRESSOR 0x34 M98090_REG_DRC_EXPANDER 0x35 M98090_REG_DSP_FILTER_ENABLE 0x41 M98090_REG_EQUALIZER_BASE 0x46 M98090_REG_RECORD_BIQUAD_BASE 0xAF M98090_REG_DIGITAL_MIC_ENABLE 0x13 M98090_REG_DIGITAL_MIC_CONFIG 0x14 Signed-off-by: Tzung-Bi Shih <tzungbi(a)google.com> --- This patch is a follow up fix for the question: https://mailman.alsa-project.org/pipermail/alsa-devel/2019-October/157364.h… Changes from v1: https://mailman.alsa-project.org/pipermail/alsa-devel/2019-November/158855.… - fix a typo in commit message - rebase to the latest for-next (a few line numbers changed) sound/soc/codecs/max98090.c | 433 ++++++++++++++++++++++++++---------- sound/soc/codecs/max98090.h | 3 +- 2 files changed, 312 insertions(+), 124 deletions(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index e46b6ada13b1..da23810f958e 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -5,24 +5,149 @@ * Copyright 2011-2012 Maxim Integrated Products */ +#include <linux/acpi.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/of.h> #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/slab.h> -#include <linux/acpi.h> -#include <linux/clk.h> #include <sound/jack.h> +#include <sound/max98090.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/tlv.h> -#include <sound/max98090.h> #include "max98090.h" +static void max98090_shdn_save_locked(struct max98090_priv *max98090) +{ + int shdn = 0; + + /* saved_shdn, saved_count, SHDN are protected by card->dapm_mutex */ + regmap_read(max98090->regmap, M98090_REG_DEVICE_SHUTDOWN, &shdn); + max98090->saved_shdn |= shdn; + ++max98090->saved_count; + + if (shdn) + regmap_write(max98090->regmap, M98090_REG_DEVICE_SHUTDOWN, 0x0); +} + +static void max98090_shdn_restore_locked(struct max98090_priv *max98090) +{ + /* saved_shdn, saved_count, SHDN are protected by card->dapm_mutex */ + if (--max98090->saved_count == 0) { + if (max98090->saved_shdn) { + regmap_write(max98090->regmap, + M98090_REG_DEVICE_SHUTDOWN, + M98090_SHDNN_MASK); + max98090->saved_shdn = 0; + } + } +} + +static void max98090_shdn_save(struct max98090_priv *max98090) +{ + mutex_lock(&max98090->component->card->dapm_mutex); + max98090_shdn_save_locked(max98090); +} + +static void max98090_shdn_restore(struct max98090_priv *max98090) +{ + max98090_shdn_restore_locked(max98090); + mutex_unlock(&max98090->component->card->dapm_mutex); +} + +static int max98090_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98090_priv *max98090 = + snd_soc_component_get_drvdata(component); + int ret; + + max98090_shdn_save(max98090); + ret = snd_soc_put_volsw(kcontrol, ucontrol); + max98090_shdn_restore(max98090); + + return ret; +} + +static int max98090_dapm_put_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98090_priv *max98090 = + snd_soc_component_get_drvdata(component); + int ret; + + max98090_shdn_save(max98090); + ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + max98090_shdn_restore(max98090); + + return ret; +} + +static int max98090_put_enum_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98090_priv *max98090 = + snd_soc_component_get_drvdata(component); + int ret; + + max98090_shdn_save(max98090); + ret = snd_soc_put_enum_double(kcontrol, ucontrol); + max98090_shdn_restore(max98090); + + return ret; +} + +static int max98090_bytes_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct max98090_priv *max98090 = + snd_soc_component_get_drvdata(component); + int ret; + + max98090_shdn_save(max98090); + ret = snd_soc_bytes_put(kcontrol, ucontrol); + max98090_shdn_restore(max98090); + + return ret; +} + +static int max98090_dapm_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98090_priv *max98090 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + case SND_SOC_DAPM_PRE_PMD: + max98090_shdn_save_locked(max98090); + break; + case SND_SOC_DAPM_POST_PMU: + case SND_SOC_DAPM_POST_PMD: + max98090_shdn_restore_locked(max98090); + break; + } + + return 0; +} + /* Allows for sparsely populated register maps */ static const struct reg_default max98090_reg[] = { { 0x00, 0x00 }, /* 00 Software Reset */ @@ -506,10 +631,13 @@ static SOC_ENUM_SINGLE_DECL(max98090_adchp_enum, max98090_pwr_perf_text); static const struct snd_kcontrol_new max98090_snd_controls[] = { - SOC_ENUM("MIC Bias VCM Bandgap", max98090_vcmbandgap_enum), + SOC_ENUM_EXT("MIC Bias VCM Bandgap", max98090_vcmbandgap_enum, + snd_soc_get_enum_double, max98090_put_enum_double), - SOC_SINGLE("DMIC MIC Comp Filter Config", M98090_REG_DIGITAL_MIC_CONFIG, - M98090_DMIC_COMP_SHIFT, M98090_DMIC_COMP_NUM - 1, 0), + SOC_SINGLE_EXT("DMIC MIC Comp Filter Config", + M98090_REG_DIGITAL_MIC_CONFIG, + M98090_DMIC_COMP_SHIFT, M98090_DMIC_COMP_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), SOC_SINGLE_EXT_TLV("MIC1 Boost Volume", M98090_REG_MIC1_INPUT_LEVEL, M98090_MIC_PA1EN_SHIFT, @@ -564,24 +692,34 @@ static const struct snd_kcontrol_new max98090_snd_controls[] = { M98090_AVR_SHIFT, M98090_AVR_NUM - 1, 1, max98090_av_tlv), - SOC_ENUM("ADC Oversampling Rate", max98090_osr128_enum), - SOC_SINGLE("ADC Quantizer Dither", M98090_REG_ADC_CONTROL, - M98090_ADCDITHER_SHIFT, M98090_ADCDITHER_NUM - 1, 0), - SOC_ENUM("ADC High Performance Mode", max98090_adchp_enum), - - SOC_SINGLE("DAC Mono Mode", M98090_REG_IO_CONFIGURATION, - M98090_DMONO_SHIFT, M98090_DMONO_NUM - 1, 0), - SOC_SINGLE("SDIN Mode", M98090_REG_IO_CONFIGURATION, - M98090_SDIEN_SHIFT, M98090_SDIEN_NUM - 1, 0), - SOC_SINGLE("SDOUT Mode", M98090_REG_IO_CONFIGURATION, - M98090_SDOEN_SHIFT, M98090_SDOEN_NUM - 1, 0), - SOC_SINGLE("SDOUT Hi-Z Mode", M98090_REG_IO_CONFIGURATION, - M98090_HIZOFF_SHIFT, M98090_HIZOFF_NUM - 1, 1), - SOC_ENUM("Filter Mode", max98090_mode_enum), - SOC_SINGLE("Record Path DC Blocking", M98090_REG_FILTER_CONFIG, - M98090_AHPF_SHIFT, M98090_AHPF_NUM - 1, 0), - SOC_SINGLE("Playback Path DC Blocking", M98090_REG_FILTER_CONFIG, - M98090_DHPF_SHIFT, M98090_DHPF_NUM - 1, 0), + SOC_ENUM_EXT("ADC Oversampling Rate", max98090_osr128_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + SOC_SINGLE_EXT("ADC Quantizer Dither", M98090_REG_ADC_CONTROL, + M98090_ADCDITHER_SHIFT, M98090_ADCDITHER_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_ENUM_EXT("ADC High Performance Mode", max98090_adchp_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + + SOC_SINGLE_EXT("DAC Mono Mode", M98090_REG_IO_CONFIGURATION, + M98090_DMONO_SHIFT, M98090_DMONO_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_SINGLE_EXT("SDIN Mode", M98090_REG_IO_CONFIGURATION, + M98090_SDIEN_SHIFT, M98090_SDIEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_SINGLE_EXT("SDOUT Mode", M98090_REG_IO_CONFIGURATION, + M98090_SDOEN_SHIFT, M98090_SDOEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_SINGLE_EXT("SDOUT Hi-Z Mode", M98090_REG_IO_CONFIGURATION, + M98090_HIZOFF_SHIFT, M98090_HIZOFF_NUM - 1, 1, + snd_soc_get_volsw, max98090_put_volsw), + SOC_ENUM_EXT("Filter Mode", max98090_mode_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + SOC_SINGLE_EXT("Record Path DC Blocking", M98090_REG_FILTER_CONFIG, + M98090_AHPF_SHIFT, M98090_AHPF_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_SINGLE_EXT("Playback Path DC Blocking", M98090_REG_FILTER_CONFIG, + M98090_DHPF_SHIFT, M98090_DHPF_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), SOC_SINGLE_TLV("Digital BQ Volume", M98090_REG_ADC_BIQUAD_LEVEL, M98090_AVBQ_SHIFT, M98090_AVBQ_NUM - 1, 1, max98090_dv_tlv), SOC_SINGLE_EXT_TLV("Digital Sidetone Volume", @@ -594,13 +732,17 @@ static const struct snd_kcontrol_new max98090_snd_controls[] = { SOC_SINGLE_TLV("Digital Volume", M98090_REG_DAI_PLAYBACK_LEVEL, M98090_DV_SHIFT, M98090_DV_NUM - 1, 1, max98090_dv_tlv), - SND_SOC_BYTES("EQ Coefficients", M98090_REG_EQUALIZER_BASE, 105), - SOC_SINGLE("Digital EQ 3 Band Switch", M98090_REG_DSP_FILTER_ENABLE, - M98090_EQ3BANDEN_SHIFT, M98090_EQ3BANDEN_NUM - 1, 0), - SOC_SINGLE("Digital EQ 5 Band Switch", M98090_REG_DSP_FILTER_ENABLE, - M98090_EQ5BANDEN_SHIFT, M98090_EQ5BANDEN_NUM - 1, 0), - SOC_SINGLE("Digital EQ 7 Band Switch", M98090_REG_DSP_FILTER_ENABLE, - M98090_EQ7BANDEN_SHIFT, M98090_EQ7BANDEN_NUM - 1, 0), + SND_SOC_BYTES_E("EQ Coefficients", M98090_REG_EQUALIZER_BASE, 105, + snd_soc_bytes_get, max98090_bytes_put), + SOC_SINGLE_EXT("Digital EQ 3 Band Switch", M98090_REG_DSP_FILTER_ENABLE, + M98090_EQ3BANDEN_SHIFT, M98090_EQ3BANDEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_SINGLE_EXT("Digital EQ 5 Band Switch", M98090_REG_DSP_FILTER_ENABLE, + M98090_EQ5BANDEN_SHIFT, M98090_EQ5BANDEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_SINGLE_EXT("Digital EQ 7 Band Switch", M98090_REG_DSP_FILTER_ENABLE, + M98090_EQ7BANDEN_SHIFT, M98090_EQ7BANDEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), SOC_SINGLE("Digital EQ Clipping Detection", M98090_REG_DAI_PLAYBACK_LEVEL_EQ, M98090_EQCLPN_SHIFT, M98090_EQCLPN_NUM - 1, 1), @@ -608,25 +750,34 @@ static const struct snd_kcontrol_new max98090_snd_controls[] = { M98090_DVEQ_SHIFT, M98090_DVEQ_NUM - 1, 1, max98090_dv_tlv), - SOC_SINGLE("ALC Enable", M98090_REG_DRC_TIMING, - M98090_DRCEN_SHIFT, M98090_DRCEN_NUM - 1, 0), - SOC_ENUM("ALC Attack Time", max98090_drcatk_enum), - SOC_ENUM("ALC Release Time", max98090_drcrls_enum), + SOC_SINGLE_EXT("ALC Enable", M98090_REG_DRC_TIMING, + M98090_DRCEN_SHIFT, M98090_DRCEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), + SOC_ENUM_EXT("ALC Attack Time", max98090_drcatk_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + SOC_ENUM_EXT("ALC Release Time", max98090_drcrls_enum, + snd_soc_get_enum_double, max98090_put_enum_double), SOC_SINGLE_TLV("ALC Make Up Volume", M98090_REG_DRC_GAIN, M98090_DRCG_SHIFT, M98090_DRCG_NUM - 1, 0, max98090_alcmakeup_tlv), - SOC_ENUM("ALC Compression Ratio", max98090_alccmp_enum), - SOC_ENUM("ALC Expansion Ratio", max98090_drcexp_enum), - SOC_SINGLE_TLV("ALC Compression Threshold Volume", + SOC_ENUM_EXT("ALC Compression Ratio", max98090_alccmp_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + SOC_ENUM_EXT("ALC Expansion Ratio", max98090_drcexp_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + SOC_SINGLE_EXT_TLV("ALC Compression Threshold Volume", M98090_REG_DRC_COMPRESSOR, M98090_DRCTHC_SHIFT, - M98090_DRCTHC_NUM - 1, 1, max98090_alccomp_tlv), - SOC_SINGLE_TLV("ALC Expansion Threshold Volume", + M98090_DRCTHC_NUM - 1, 1, + snd_soc_get_volsw, max98090_put_volsw, max98090_alccomp_tlv), + SOC_SINGLE_EXT_TLV("ALC Expansion Threshold Volume", M98090_REG_DRC_EXPANDER, M98090_DRCTHE_SHIFT, - M98090_DRCTHE_NUM - 1, 1, max98090_drcexp_tlv), + M98090_DRCTHE_NUM - 1, 1, + snd_soc_get_volsw, max98090_put_volsw, max98090_drcexp_tlv), - SOC_ENUM("DAC HP Playback Performance Mode", - max98090_dac_perfmode_enum), - SOC_ENUM("DAC High Performance Mode", max98090_dachp_enum), + SOC_ENUM_EXT("DAC HP Playback Performance Mode", + max98090_dac_perfmode_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + SOC_ENUM_EXT("DAC High Performance Mode", max98090_dachp_enum, + snd_soc_get_enum_double, max98090_put_enum_double), SOC_SINGLE_TLV("Headphone Left Mixer Volume", M98090_REG_HP_CONTROL, M98090_MIXHPLG_SHIFT, @@ -684,9 +835,12 @@ static const struct snd_kcontrol_new max98090_snd_controls[] = { SOC_SINGLE("Volume Adjustment Smoothing", M98090_REG_LEVEL_CONTROL, M98090_VSENN_SHIFT, M98090_VSENN_NUM - 1, 1), - SND_SOC_BYTES("Biquad Coefficients", M98090_REG_RECORD_BIQUAD_BASE, 15), - SOC_SINGLE("Biquad Switch", M98090_REG_DSP_FILTER_ENABLE, - M98090_ADCBQEN_SHIFT, M98090_ADCBQEN_NUM - 1, 0), + SND_SOC_BYTES_E("Biquad Coefficients", + M98090_REG_RECORD_BIQUAD_BASE, 15, + snd_soc_bytes_get, max98090_bytes_put), + SOC_SINGLE_EXT("Biquad Switch", M98090_REG_DSP_FILTER_ENABLE, + M98090_ADCBQEN_SHIFT, M98090_ADCBQEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), }; static const struct snd_kcontrol_new max98091_snd_controls[] = { @@ -695,10 +849,12 @@ static const struct snd_kcontrol_new max98091_snd_controls[] = { M98090_DMIC34_ZEROPAD_SHIFT, M98090_DMIC34_ZEROPAD_NUM - 1, 0), - SOC_ENUM("Filter DMIC34 Mode", max98090_filter_dmic34mode_enum), - SOC_SINGLE("DMIC34 DC Blocking", M98090_REG_FILTER_CONFIG, + SOC_ENUM_EXT("Filter DMIC34 Mode", max98090_filter_dmic34mode_enum, + snd_soc_get_enum_double, max98090_put_enum_double), + SOC_SINGLE_EXT("DMIC34 DC Blocking", M98090_REG_FILTER_CONFIG, M98090_FLT_DMIC34HPF_SHIFT, - M98090_FLT_DMIC34HPF_NUM - 1, 0), + M98090_FLT_DMIC34HPF_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), SOC_SINGLE_TLV("DMIC3 Boost Volume", M98090_REG_DMIC3_VOLUME, M98090_DMIC_AV3G_SHIFT, M98090_DMIC_AV3G_NUM - 1, 0, @@ -716,8 +872,9 @@ static const struct snd_kcontrol_new max98091_snd_controls[] = { SND_SOC_BYTES("DMIC34 Biquad Coefficients", M98090_REG_DMIC34_BIQUAD_BASE, 15), - SOC_SINGLE("DMIC34 Biquad Switch", M98090_REG_DSP_FILTER_ENABLE, - M98090_DMIC34BQEN_SHIFT, M98090_DMIC34BQEN_NUM - 1, 0), + SOC_SINGLE_EXT("DMIC34 Biquad Switch", M98090_REG_DSP_FILTER_ENABLE, + M98090_DMIC34BQEN_SHIFT, M98090_DMIC34BQEN_NUM - 1, 0, + snd_soc_get_volsw, max98090_put_volsw), SOC_SINGLE_TLV("DMIC34 BQ PreAttenuation Volume", M98090_REG_DMIC34_BQ_PREATTEN, M98090_AV34BQ_SHIFT, @@ -771,19 +928,6 @@ static int max98090_micinput_event(struct snd_soc_dapm_widget *w, return 0; } -static int max98090_shdn_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - struct max98090_priv *max98090 = snd_soc_component_get_drvdata(component); - - if (event & SND_SOC_DAPM_POST_PMU) - max98090->shdn_pending = true; - - return 0; - -} - static const char *mic1_mux_text[] = { "IN12", "IN56" }; static SOC_ENUM_SINGLE_DECL(mic1_mux_enum, @@ -884,10 +1028,14 @@ static SOC_ENUM_SINGLE_DECL(ltenr_mux_enum, lten_mux_text); static const struct snd_kcontrol_new max98090_ltenl_mux = - SOC_DAPM_ENUM("LTENL Mux", ltenl_mux_enum); + SOC_DAPM_ENUM_EXT("LTENL Mux", ltenl_mux_enum, + snd_soc_dapm_get_enum_double, + max98090_dapm_put_enum_double); static const struct snd_kcontrol_new max98090_ltenr_mux = - SOC_DAPM_ENUM("LTENR Mux", ltenr_mux_enum); + SOC_DAPM_ENUM_EXT("LTENR Mux", ltenr_mux_enum, + snd_soc_dapm_get_enum_double, + max98090_dapm_put_enum_double); static const char *lben_mux_text[] = { "Normal", "Loopback" }; @@ -902,10 +1050,14 @@ static SOC_ENUM_SINGLE_DECL(lbenr_mux_enum, lben_mux_text); static const struct snd_kcontrol_new max98090_lbenl_mux = - SOC_DAPM_ENUM("LBENL Mux", lbenl_mux_enum); + SOC_DAPM_ENUM_EXT("LBENL Mux", lbenl_mux_enum, + snd_soc_dapm_get_enum_double, + max98090_dapm_put_enum_double); static const struct snd_kcontrol_new max98090_lbenr_mux = - SOC_DAPM_ENUM("LBENR Mux", lbenr_mux_enum); + SOC_DAPM_ENUM_EXT("LBENR Mux", lbenr_mux_enum, + snd_soc_dapm_get_enum_double, + max98090_dapm_put_enum_double); static const char *stenl_mux_text[] = { "Normal", "Sidetone Left" }; @@ -1072,21 +1224,25 @@ static const struct snd_soc_dapm_widget max98090_dapm_widgets[] = { SND_SOC_DAPM_INPUT("IN56"), SND_SOC_DAPM_SUPPLY("MICBIAS", M98090_REG_INPUT_ENABLE, - M98090_MBEN_SHIFT, 0, NULL, 0), + M98090_MBEN_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_SUPPLY("SHDN", M98090_REG_DEVICE_SHUTDOWN, M98090_SHDNN_SHIFT, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("SDIEN", M98090_REG_IO_CONFIGURATION, - M98090_SDIEN_SHIFT, 0, NULL, 0), + M98090_SDIEN_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_SUPPLY("SDOEN", M98090_REG_IO_CONFIGURATION, - M98090_SDOEN_SHIFT, 0, NULL, 0), + M98090_SDOEN_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_SUPPLY("DMICL_ENA", M98090_REG_DIGITAL_MIC_ENABLE, - M98090_DIGMICL_SHIFT, 0, max98090_shdn_event, - SND_SOC_DAPM_POST_PMU), + M98090_DIGMICL_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_SUPPLY("DMICR_ENA", M98090_REG_DIGITAL_MIC_ENABLE, - M98090_DIGMICR_SHIFT, 0, max98090_shdn_event, - SND_SOC_DAPM_POST_PMU), + M98090_DIGMICR_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_SUPPLY("AHPF", M98090_REG_FILTER_CONFIG, - M98090_AHPF_SHIFT, 0, NULL, 0), + M98090_AHPF_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), /* * Note: Sysclk and misc power supplies are taken care of by SHDN @@ -1116,10 +1272,12 @@ static const struct snd_soc_dapm_widget max98090_dapm_widgets[] = { &max98090_lineb_mixer_controls[0], ARRAY_SIZE(max98090_lineb_mixer_controls)), - SND_SOC_DAPM_PGA("LINEA Input", M98090_REG_INPUT_ENABLE, - M98090_LINEAEN_SHIFT, 0, NULL, 0), - SND_SOC_DAPM_PGA("LINEB Input", M98090_REG_INPUT_ENABLE, - M98090_LINEBEN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA_E("LINEA Input", M98090_REG_INPUT_ENABLE, + M98090_LINEAEN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), + SND_SOC_DAPM_PGA_E("LINEB Input", M98090_REG_INPUT_ENABLE, + M98090_LINEBEN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_MIXER("Left ADC Mixer", SND_SOC_NOPM, 0, 0, &max98090_left_adc_mixer_controls[0], @@ -1130,11 +1288,11 @@ static const struct snd_soc_dapm_widget max98090_dapm_widgets[] = { ARRAY_SIZE(max98090_right_adc_mixer_controls)), SND_SOC_DAPM_ADC_E("ADCL", NULL, M98090_REG_INPUT_ENABLE, - M98090_ADLEN_SHIFT, 0, max98090_shdn_event, - SND_SOC_DAPM_POST_PMU), + M98090_ADLEN_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_ADC_E("ADCR", NULL, M98090_REG_INPUT_ENABLE, - M98090_ADREN_SHIFT, 0, max98090_shdn_event, - SND_SOC_DAPM_POST_PMU), + M98090_ADREN_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_AIF_OUT("AIFOUTL", "HiFi Capture", 0, SND_SOC_NOPM, 0, 0), @@ -1162,10 +1320,12 @@ static const struct snd_soc_dapm_widget max98090_dapm_widgets[] = { SND_SOC_DAPM_AIF_IN("AIFINL", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_AIF_IN("AIFINR", "HiFi Playback", 1, SND_SOC_NOPM, 0, 0), - SND_SOC_DAPM_DAC("DACL", NULL, M98090_REG_OUTPUT_ENABLE, - M98090_DALEN_SHIFT, 0), - SND_SOC_DAPM_DAC("DACR", NULL, M98090_REG_OUTPUT_ENABLE, - M98090_DAREN_SHIFT, 0), + SND_SOC_DAPM_DAC_E("DACL", NULL, M98090_REG_OUTPUT_ENABLE, + M98090_DALEN_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), + SND_SOC_DAPM_DAC_E("DACR", NULL, M98090_REG_OUTPUT_ENABLE, + M98090_DAREN_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_MIXER("Left Headphone Mixer", SND_SOC_NOPM, 0, 0, &max98090_left_hp_mixer_controls[0], @@ -1200,20 +1360,26 @@ static const struct snd_soc_dapm_widget max98090_dapm_widgets[] = { SND_SOC_DAPM_MUX("MIXHPRSEL Mux", SND_SOC_NOPM, 0, 0, &max98090_mixhprsel_mux), - SND_SOC_DAPM_PGA("HP Left Out", M98090_REG_OUTPUT_ENABLE, - M98090_HPLEN_SHIFT, 0, NULL, 0), - SND_SOC_DAPM_PGA("HP Right Out", M98090_REG_OUTPUT_ENABLE, - M98090_HPREN_SHIFT, 0, NULL, 0), - - SND_SOC_DAPM_PGA("SPK Left Out", M98090_REG_OUTPUT_ENABLE, - M98090_SPLEN_SHIFT, 0, NULL, 0), - SND_SOC_DAPM_PGA("SPK Right Out", M98090_REG_OUTPUT_ENABLE, - M98090_SPREN_SHIFT, 0, NULL, 0), - - SND_SOC_DAPM_PGA("RCV Left Out", M98090_REG_OUTPUT_ENABLE, - M98090_RCVLEN_SHIFT, 0, NULL, 0), - SND_SOC_DAPM_PGA("RCV Right Out", M98090_REG_OUTPUT_ENABLE, - M98090_RCVREN_SHIFT, 0, NULL, 0), + SND_SOC_DAPM_PGA_E("HP Left Out", M98090_REG_OUTPUT_ENABLE, + M98090_HPLEN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), + SND_SOC_DAPM_PGA_E("HP Right Out", M98090_REG_OUTPUT_ENABLE, + M98090_HPREN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), + + SND_SOC_DAPM_PGA_E("SPK Left Out", M98090_REG_OUTPUT_ENABLE, + M98090_SPLEN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), + SND_SOC_DAPM_PGA_E("SPK Right Out", M98090_REG_OUTPUT_ENABLE, + M98090_SPREN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), + + SND_SOC_DAPM_PGA_E("RCV Left Out", M98090_REG_OUTPUT_ENABLE, + M98090_RCVLEN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), + SND_SOC_DAPM_PGA_E("RCV Right Out", M98090_REG_OUTPUT_ENABLE, + M98090_RCVREN_SHIFT, 0, NULL, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_OUTPUT("HPL"), SND_SOC_DAPM_OUTPUT("HPR"), @@ -1228,9 +1394,11 @@ static const struct snd_soc_dapm_widget max98091_dapm_widgets[] = { SND_SOC_DAPM_INPUT("DMIC4"), SND_SOC_DAPM_SUPPLY("DMIC3_ENA", M98090_REG_DIGITAL_MIC_ENABLE, - M98090_DIGMIC3_SHIFT, 0, NULL, 0), + M98090_DIGMIC3_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), SND_SOC_DAPM_SUPPLY("DMIC4_ENA", M98090_REG_DIGITAL_MIC_ENABLE, - M98090_DIGMIC4_SHIFT, 0, NULL, 0), + M98090_DIGMIC4_SHIFT, 0, max98090_dapm_event, + SND_SOC_DAPM_PRE_POST_PMU | SND_SOC_DAPM_PRE_POST_PMD), }; static const struct snd_soc_dapm_route max98090_dapm_routes[] = { @@ -1501,6 +1669,11 @@ static void max98090_configure_bclk(struct snd_soc_component *component) return; } + /* + * Master mode: no need to save and restore SHDN for the following + * sensitive registers. + */ + /* Check for supported PCLK to LRCLK ratios */ for (i = 0; i < ARRAY_SIZE(pclk_rates); i++) { if ((pclk_rates[i] == max98090->sysclk) && @@ -1587,12 +1760,14 @@ static int max98090_dai_set_fmt(struct snd_soc_dai *codec_dai, switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: /* Set to slave mode PLL - MAS mode off */ + max98090_shdn_save(max98090); snd_soc_component_write(component, M98090_REG_CLOCK_RATIO_NI_MSB, 0x00); snd_soc_component_write(component, M98090_REG_CLOCK_RATIO_NI_LSB, 0x00); snd_soc_component_update_bits(component, M98090_REG_CLOCK_MODE, M98090_USE_M1_MASK, 0); + max98090_shdn_restore(max98090); max98090->master = false; break; case SND_SOC_DAIFMT_CBM_CFM: @@ -1618,7 +1793,9 @@ static int max98090_dai_set_fmt(struct snd_soc_dai *codec_dai, dev_err(component->dev, "DAI clock mode unsupported"); return -EINVAL; } + max98090_shdn_save(max98090); snd_soc_component_write(component, M98090_REG_MASTER_MODE, regval); + max98090_shdn_restore(max98090); regval = 0; switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -1663,8 +1840,10 @@ static int max98090_dai_set_fmt(struct snd_soc_dai *codec_dai, if (max98090->tdm_slots > 1) regval ^= M98090_BCI_MASK; + max98090_shdn_save(max98090); snd_soc_component_write(component, M98090_REG_INTERFACE_FORMAT, regval); + max98090_shdn_restore(max98090); } return 0; @@ -1676,6 +1855,7 @@ static int max98090_set_tdm_slot(struct snd_soc_dai *codec_dai, struct snd_soc_component *component = codec_dai->component; struct max98090_priv *max98090 = snd_soc_component_get_drvdata(component); struct max98090_cdata *cdata; + cdata = &max98090->dai[0]; if (slots < 0 || slots > 4) @@ -1685,6 +1865,7 @@ static int max98090_set_tdm_slot(struct snd_soc_dai *codec_dai, max98090->tdm_width = slot_width; if (max98090->tdm_slots > 1) { + max98090_shdn_save(max98090); /* SLOTL SLOTR SLOTDLY */ snd_soc_component_write(component, M98090_REG_TDM_FORMAT, 0 << M98090_TDM_SLOTL_SHIFT | @@ -1695,6 +1876,7 @@ static int max98090_set_tdm_slot(struct snd_soc_dai *codec_dai, snd_soc_component_update_bits(component, M98090_REG_TDM_CONTROL, M98090_TDM_MASK, M98090_TDM_MASK); + max98090_shdn_restore(max98090); } /* @@ -1894,6 +2076,7 @@ static int max98090_configure_dmic(struct max98090_priv *max98090, dmic_freq = dmic_table[pclk_index].settings[micclk_index].freq; dmic_comp = dmic_table[pclk_index].settings[micclk_index].comp[i]; + max98090_shdn_save(max98090); regmap_update_bits(max98090->regmap, M98090_REG_DIGITAL_MIC_ENABLE, M98090_MICCLK_MASK, micclk_index << M98090_MICCLK_SHIFT); @@ -1902,6 +2085,7 @@ static int max98090_configure_dmic(struct max98090_priv *max98090, M98090_DMIC_COMP_MASK | M98090_DMIC_FREQ_MASK, dmic_comp << M98090_DMIC_COMP_SHIFT | dmic_freq << M98090_DMIC_FREQ_SHIFT); + max98090_shdn_restore(max98090); return 0; } @@ -1938,8 +2122,10 @@ static int max98090_dai_hw_params(struct snd_pcm_substream *substream, switch (params_width(params)) { case 16: + max98090_shdn_save(max98090); snd_soc_component_update_bits(component, M98090_REG_INTERFACE_FORMAT, M98090_WS_MASK, 0); + max98090_shdn_restore(max98090); break; default: return -EINVAL; @@ -1950,6 +2136,7 @@ static int max98090_dai_hw_params(struct snd_pcm_substream *substream, cdata->rate = max98090->lrclk; + max98090_shdn_save(max98090); /* Update filter mode */ if (max98090->lrclk < 24000) snd_soc_component_update_bits(component, M98090_REG_FILTER_CONFIG, @@ -1965,6 +2152,7 @@ static int max98090_dai_hw_params(struct snd_pcm_substream *substream, else snd_soc_component_update_bits(component, M98090_REG_FILTER_CONFIG, M98090_DHF_MASK, M98090_DHF_MASK); + max98090_shdn_restore(max98090); max98090_configure_dmic(max98090, max98090->dmic_freq, max98090->pclk, max98090->lrclk); @@ -1995,6 +2183,7 @@ static int max98090_dai_set_sysclk(struct snd_soc_dai *dai, * 0x02 (when master clk is 20MHz to 40MHz).. * 0x03 (when master clk is 40MHz to 60MHz).. */ + max98090_shdn_save(max98090); if ((freq >= 10000000) && (freq <= 20000000)) { snd_soc_component_write(component, M98090_REG_SYSTEM_CLOCK, M98090_PSCLK_DIV1); @@ -2009,8 +2198,10 @@ static int max98090_dai_set_sysclk(struct snd_soc_dai *dai, max98090->pclk = freq >> 2; } else { dev_err(component->dev, "Invalid master clock frequency\n"); + max98090_shdn_restore(max98090); return -EINVAL; } + max98090_shdn_restore(max98090); max98090->sysclk = freq; @@ -2122,10 +2313,12 @@ static void max98090_pll_work(struct max98090_priv *max98090) */ /* Toggle shutdown OFF then ON */ + mutex_lock(&component->card->dapm_mutex); snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN, M98090_SHDNN_MASK, 0); snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN, M98090_SHDNN_MASK, M98090_SHDNN_MASK); + mutex_unlock(&component->card->dapm_mutex); for (i = 0; i < 10; ++i) { /* Give PLL time to lock */ @@ -2448,7 +2641,12 @@ static int max98090_probe(struct snd_soc_component *component) */ snd_soc_component_read32(component, M98090_REG_DEVICE_STATUS); - /* High Performance is default */ + /* + * SHDN should be 0 at the point, no need to save/restore for the + * following registers. + * + * High Performance is default + */ snd_soc_component_update_bits(component, M98090_REG_DAC_CONTROL, M98090_DACHP_MASK, 1 << M98090_DACHP_SHIFT); @@ -2459,7 +2657,12 @@ static int max98090_probe(struct snd_soc_component *component) M98090_ADCHP_MASK, 1 << M98090_ADCHP_SHIFT); - /* Turn on VCM bandgap reference */ + /* + * SHDN should be 0 at the point, no need to save/restore for the + * following registers. + * + * Turn on VCM bandgap reference + */ snd_soc_component_write(component, M98090_REG_BIAS_CONTROL, M98090_VCM_MODE_MASK); @@ -2491,25 +2694,9 @@ static void max98090_remove(struct snd_soc_component *component) max98090->component = NULL; } -static void max98090_seq_notifier(struct snd_soc_component *component, - enum snd_soc_dapm_type event, int subseq) -{ - struct max98090_priv *max98090 = snd_soc_component_get_drvdata(component); - - if (max98090->shdn_pending) { - snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN, - M98090_SHDNN_MASK, 0); - msleep(40); - snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN, - M98090_SHDNN_MASK, M98090_SHDNN_MASK); - max98090->shdn_pending = false; - } -} - static const struct snd_soc_component_driver soc_component_dev_max98090 = { .probe = max98090_probe, .remove = max98090_remove, - .seq_notifier = max98090_seq_notifier, .set_bias_level = max98090_set_bias_level, .idle_bias_on = 1, .use_pmdown_time = 1, diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h index a197114b0dad..0a31708b7df7 100644 --- a/sound/soc/codecs/max98090.h +++ b/sound/soc/codecs/max98090.h @@ -1539,7 +1539,8 @@ struct max98090_priv { unsigned int pa2en; unsigned int sidetone; bool master; - bool shdn_pending; + int saved_count; + int saved_shdn; }; int max98090_mic_detect(struct snd_soc_component *component, -- 2.24.0.432.g9d3f5f5b63-goog

3 20

[alsa-devel] [PATCH for-5.6 0/2] drm/bridge: dw-hdmi: PCM API updates
by Takashi Iwai 09 Jan '20

09 Jan '20

Hi, this is a patch set for updating ALSA PCM API usages in dw-hdmi driver. I already tried to "fix" the driver some time ago but it was utterly wrong. So this is a combination of the revised patch and another cleanup patch. The first one is to change the buffer allocation mechanism in the driver to the manual allocation of the h/w buffer and the automatic allocation of PCM stream buffers via the new standard API. The significant change is that size of the h/w buffer isn't no longer controlled via ALSA preallocation proc file but rather via the new module option (if any). The second one is a oneliner patch just to remove the superfluous PCM ops. Both need the ALSA PCM core changes in 5.5-rc1, so please apply them on top of 5.5-rc1 or later. Or, just let me know if I should apply them through sound git tree. thanks, Takashi === Takashi Iwai (2): drm/bridge: dw-hdmi: Follow the standard ALSA memalloc way drm/bridge: dw-hdmi: Drop superfluous ioctl PCM ops .../gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 49 ++++++++++++---------- 1 file changed, 26 insertions(+), 23 deletions(-) -- 2.16.4

3 5

[alsa-devel] [PATCH 00/10] mfd: Add support for Analog Devices A2B transceiver
by Daniel Mack 08 Jan '20

08 Jan '20

This patch series adds support for Analog Device's AD242x A2B transceivers. https://www.analog.com/media/en/technical-documentation/user-guides/AD242x_… These transceivers are used to form an audio network by connecting the parts in a daisy-chain. On top of audio, the devices expose some other functions such as GPIO, programmable clock outputs and remote-side I2C bus master. The first node in the chain is called the master node, and all other devices are called slave nodes. Up to 15 such devices can be connected this way. The master device responds on two addresses on the I2C bus. The primary one is used to access all registers in the master node itself, the secondary is for accessing remote nodes after prior setup through the master node. In the driver stack, these details are hidden behind specific regmap configs. The driver stack is implemented as MFD core and companion drivers that can be registered as sub-devices in DT. Drivers for these sub-devices can be used for both master and slave nodes, as they just interface with the node's regmap. The master node is responsible for discovering all the slave nodes at probe time, and it needs to take the used audio and routing modes in each of the slave devices into account in order to pre-calculate the bus-timings correctly. Hence, this bus is not hot-pluggable. Transceivers can both receive and provide audio, and streams can be routed from one node to any other, including many others. The tricky bit is how to expose the audio routing in DT in a sane way. The way it is implemented here, the slave nodes specify the number of slots they each consume and generate, and which thereof they forward from one side to the other. This mimics the internal register structure and should allow for even exotic setups. Please let me know what you think and what could be improved. Thanks, Daniel Daniel Mack (10): dt-bindings: mfd: Add documentation for ad242x dt-bindings: i2c: Add documentation for ad242x i2c controllers dt-bindings: gpio: Add documentation for AD242x GPIO controllers dt-bindings: clock: Add documentation for AD242x clock providers dt-bindings: sound: Add documentation for AD242x codecs mfd: Add core driver for AD242x A2B transceivers i2c: Add driver for AD242x bus controller gpio: Add driver for AD242x GPIO controllers clk: Add support for AD242x clock output providers ASoC: Add codec component for AD242x nodes .../bindings/clock/adi,ad242x-clk.yaml | 32 + .../bindings/gpio/adi,ad242x-gpio.yaml | 65 ++ .../bindings/i2c/adi,ad242x-i2c.yaml | 31 + .../bindings/mfd/adi,ad242x-bus.yaml | 29 + .../bindings/mfd/adi,ad242x-master.yaml | 235 +++++++ .../bindings/mfd/adi,ad242x-slave.yaml | 108 ++++ .../bindings/sound/adi,ad242x-codec.yaml | 31 + drivers/clk/Kconfig | 6 + drivers/clk/Makefile | 1 + drivers/clk/clk-ad242x.c | 231 +++++++ drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-ad242x.c | 229 +++++++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-ad242x.c | 178 +++++ drivers/mfd/Kconfig | 11 + drivers/mfd/Makefile | 1 + drivers/mfd/ad242x-bus.c | 42 ++ drivers/mfd/ad242x-master.c | 611 ++++++++++++++++++ drivers/mfd/ad242x-node.c | 262 ++++++++ drivers/mfd/ad242x-slave.c | 234 +++++++ include/dt-bindings/clock/adi,ad242x.h | 9 + include/linux/mfd/ad242x.h | 400 ++++++++++++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ad242x.c | 338 ++++++++++ 27 files changed, 3109 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/adi,ad242x-clk.yaml create mode 100644 Documentation/devicetree/bindings/gpio/adi,ad242x-gpio.yaml create mode 100644 Documentation/devicetree/bindings/i2c/adi,ad242x-i2c.yaml create mode 100644 Documentation/devicetree/bindings/mfd/adi,ad242x-bus.yaml create mode 100644 Documentation/devicetree/bindings/mfd/adi,ad242x-master.yaml create mode 100644 Documentation/devicetree/bindings/mfd/adi,ad242x-slave.yaml create mode 100644 Documentation/devicetree/bindings/sound/adi,ad242x-codec.yaml create mode 100644 drivers/clk/clk-ad242x.c create mode 100644 drivers/gpio/gpio-ad242x.c create mode 100644 drivers/i2c/busses/i2c-ad242x.c create mode 100644 drivers/mfd/ad242x-bus.c create mode 100644 drivers/mfd/ad242x-master.c create mode 100644 drivers/mfd/ad242x-node.c create mode 100644 drivers/mfd/ad242x-slave.c create mode 100644 include/dt-bindings/clock/adi,ad242x.h create mode 100644 include/linux/mfd/ad242x.h create mode 100644 sound/soc/codecs/ad242x.c -- 2.23.0

8 35

[alsa-devel] [PATCH 0/7] ALSA: hda: Enable HDAudio compress
by Cezary Rojewski 07 Jan '20

07 Jan '20

This set of patches provides new interfaces - page allocation - and runtime flow adjustments - PM support - for compress operations. For HDA part, work has been done to account for compress streams when servicing IRQs, setting up BDLs and assigning DMAs. End goal is to make room for one of DSP debug features: data probing. It takes advantage of compress streams when extracting data from running audio pipeline. Initial review and development of probes can be found under: https://github.com/thesofproject/linux/pull/1276 with this very set of patches being separated and reviewed on: https://github.com/thesofproject/linux/pull/1571 Cezary Rojewski (7): ALSA: hda: Allow for compress stream to hdac_ext_stream assignment ALSA: hda: Prepare for compress stream support ALSA: hda: Interrupt servicing and BDL setup for compress streams ALSA: core: Expand DMA buffer information ALSA: core: Implement compress page allocation and free routines ASoC: compress: Add pm_runtime support ASoC: SOF: Intel: Account for compress streams when servicing IRQs include/sound/compress_driver.h | 40 ++++++++++++++++++------ include/sound/hdaudio.h | 2 ++ include/sound/hdaudio_ext.h | 2 ++ sound/core/compress_offload.c | 42 ++++++++++++++++++++++++++ sound/hda/ext/hdac_ext_stream.c | 46 +++++++++++++++++++++++++--- sound/hda/hdac_controller.c | 4 +-- sound/hda/hdac_stream.c | 52 ++++++++++++++++++++------------ sound/soc/soc-compress.c | 29 +++++++++++++++++- sound/soc/sof/intel/hda-stream.c | 26 ++++++++++++++-- 9 files changed, 205 insertions(+), 38 deletions(-) -- 2.17.1

4 18

[alsa-devel] [PATCH alsa-utils 00/11] alsa-info.sh: Improve output and fix file upload issues
by David Ward 07 Jan '20

07 Jan '20

David Ward (11): alsa-info.sh: Consolidate PCI device output alsa-info.sh: Read from /proc/modules and sort the result alsa-info.sh: Simplify iteration over cards when calling amixer alsa-info.sh: Use existing function to print ALSA configuration files alsa-info.sh: Exit script after writing information to stdout alsa-info.sh: Replace gauge with infobox for upload dialog alsa-info.sh: Remove progress spinner during upload without dialog alsa-info.sh: Condense nested commands for file upload alsa-info.sh: Condense nested commands for formatting upload result alsa-info.sh: Perform test for wget earlier alsa-info.sh: Warn after actual upload failure; do not ping server alsa-info/alsa-info.sh | 251 ++++++++++++++++++------------------------------- 1 file changed, 90 insertions(+), 161 deletions(-) -- 1.8.3.1

2 12

[alsa-devel] [PATCH] pinctrl: lochnagar: select GPIOLIB
by Arnd Bergmann 07 Jan '20

07 Jan '20

In a rare randconfig build I came across one configuration that does not enable CONFIG_GPIOLIB, which is needed by lochnagar: ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! Add another 'select' like all other pinctrl drivers have. Fixes: 0548448b719a ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- I wonder if GPIOLIB should just become mandatory when enabling the pinctrl subsystem, or if there are still good reasons for leaving it disabled on any machine that uses CONFIG_PINCTRL. --- drivers/pinctrl/cirrus/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/cirrus/Kconfig b/drivers/pinctrl/cirrus/Kconfig index f1806fd781a0..530426a74f75 100644 --- a/drivers/pinctrl/cirrus/Kconfig +++ b/drivers/pinctrl/cirrus/Kconfig @@ -2,6 +2,7 @@ config PINCTRL_LOCHNAGAR tristate "Cirrus Logic Lochnagar pinctrl driver" depends on MFD_LOCHNAGAR + select GPIOLIB select PINMUX select PINCONF select GENERIC_PINCONF -- 2.20.0

4 6

[alsa-devel] [PATCH] ASoC: rt5677: add SPI_MASTER dependency
by Arnd Bergmann 07 Jan '20

07 Jan '20

When CONFIG_SPI is disabled, the newly added code for the DSP firmware loading fails to link: ERROR: "rt5677_spi_hotword_detected" [sound/soc/codecs/snd-soc-rt5677.ko] undefined! ERROR: "rt5677_spi_write" [sound/soc/codecs/snd-soc-rt5677.ko] undefined! Add a dependency to prevent this configuration. Note: the does not work with the DT probing, as there is no binding for the SPI half of the driver, but nothing seems to be using that with the mainline kernel anyway. Fixes: 461c623270e4 ("ASoC: rt5677: Load firmware via SPI using delayed work") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- sound/soc/codecs/Kconfig | 1 + sound/soc/intel/boards/Kconfig | 1 + sound/soc/mediatek/Kconfig | 2 +- sound/soc/tegra/Kconfig | 2 +- 4 files changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 71b7286d14f2..8e9c461a84f8 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1047,6 +1047,7 @@ config SND_SOC_RT5670 config SND_SOC_RT5677 tristate + depends on SPI_MASTER select REGMAP_I2C select REGMAP_IRQ diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index ef20316e83d1..da7f9111f3d3 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -34,6 +34,7 @@ if SND_SOC_INTEL_HASWELL || SND_SOC_SOF_BROADWELL config SND_SOC_INTEL_BDW_RT5677_MACH tristate "Broadwell with RT5677 codec" depends on I2C + depends on SPI_MASTER depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST depends on GPIOLIB || COMPILE_TEST depends on X86_INTEL_LPSS || COMPILE_TEST diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig index a656d2014127..4699787c93ed 100644 --- a/sound/soc/mediatek/Kconfig +++ b/sound/soc/mediatek/Kconfig @@ -97,7 +97,7 @@ config SND_SOC_MT8173_RT5650_RT5514 config SND_SOC_MT8173_RT5650_RT5676 tristate "ASoC Audio driver for MT8173 with RT5650 RT5676 codecs" - depends on SND_SOC_MT8173 && I2C + depends on SND_SOC_MT8173 && I2C && SPI_MASTER select SND_SOC_RT5645 select SND_SOC_RT5677 select SND_SOC_HDMI_CODEC diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig index addadc827b91..df36e84c0116 100644 --- a/sound/soc/tegra/Kconfig +++ b/sound/soc/tegra/Kconfig @@ -122,7 +122,7 @@ config SND_SOC_TEGRA_MAX98090 config SND_SOC_TEGRA_RT5677 tristate "SoC Audio support for Tegra boards using a RT5677 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on SND_SOC_TEGRA && I2C && GPIOLIB && SPI_MASTER select SND_SOC_RT5677 help Say Y or M here if you want to add support for SoC audio on Tegra -- 2.20.0

4 4

[alsa-devel] [PATCH v5 00/11] ASoC: Add support to WCD9340/WCD9341 codec
by Srinivas Kandagatla 07 Jan '20

07 Jan '20

This patchset adds support to Qualcomm WCD9340/WCD9341 Codec which is a standalone Hi-Fi audio codec IC. This codec supports both I2S/I2C and SLIMbus audio interfaces. On slimbus interface it supports two data lanes; 16 Tx ports and 8 Rx ports. It has Five DACs and seven dedicated interpolators, Multibutton headset control (MBHC), Active noise cancellation, Sidetone paths, MAD (mic activity detection) and codec processing engine. It supports Class-H differential earpiece out and stereo single ended headphones out. This codec also has integrated SoundWire controller. Patchset for this is already sent for review at https://patchwork.kernel.org/cover/11185769/ This patchset has been tested on SDM845 based DragonBoard DB845c and Lenovo Yoga C630 laptop with WSA881x smart speaker amplifiers via soundwire and 4 DMICs. gpio controller patch does not have any link dependency, it can go by its own. Most of the code in this driver is rework of Qualcomm downstream drivers used in Andriod. Credits to Banajit Goswami and Patrick Lai's Team. Thanks, srini Changes since v4: - updated microvolt bindings as suggested by Rob. - slimbus optional property patch already applied. Srinivas Kandagatla (11): ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec mfd: wcd934x: add support to wcd9340/wcd9341 codec ASoC: wcd934x: add support to wcd9340/wcd9341 codec ASoC: wcd934x: add basic controls ASoC: wcd934x: add playback dapm widgets ASoC: wcd934x: add capture dapm widgets ASoC: wcd934x: add audio routings dt-bindings: gpio: wcd934x: Add bindings for gpio gpio: wcd934x: Add support to wcd934x gpio controller ASoC: qcom: dt-bindings: Add compatible for DB845c and Lenovo Yoga ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga .../bindings/gpio/qcom,wcd934x-gpio.yaml | 47 + .../devicetree/bindings/sound/qcom,sdm845.txt | 5 +- .../bindings/sound/qcom,wcd934x.yaml | 175 + drivers/gpio/Kconfig | 8 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-wcd934x.c | 104 + drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/wcd934x.c | 306 + include/linux/mfd/wcd934x/registers.h | 531 ++ include/linux/mfd/wcd934x/wcd934x.h | 31 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wcd934x.c | 5084 +++++++++++++++++ sound/soc/qcom/sdm845.c | 86 +- 15 files changed, 6401 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/qcom,wcd934x-gpio.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml create mode 100644 drivers/gpio/gpio-wcd934x.c create mode 100644 drivers/mfd/wcd934x.c create mode 100644 include/linux/mfd/wcd934x/registers.h create mode 100644 include/linux/mfd/wcd934x/wcd934x.h create mode 100644 sound/soc/codecs/wcd934x.c -- 2.21.0

4 16

[alsa-devel] [PATCH] ALSA: usb-audio: Add support for Presonus Studio 1810c
by mickflemm＠gmail.com 06 Jan '20

06 Jan '20

This patch adds support for Presonus Studio 1810c, a usb interface that's UAC2 compliant with a few quirks and a few extra hw-specific controls. I've tested all 3 altsettings and the added switch controls and they work as expected. More infos on the card: https://www.presonus.com/products/Studio-1810c Note that this work is based on packet inspection with usbmon. I just wanted to get this card to work for using it on our open-source radio station: https://github.com/UoC-Radio Signed-off-by: Nick Kossifidis <mickflemm(a)gmail.com> --- sound/usb/Makefile | 1 + sound/usb/format.c | 17 ++ sound/usb/mixer_quirks.c | 5 + sound/usb/mixer_s1810c.c | 565 +++++++++++++++++++++++++++++++++++++++ sound/usb/mixer_s1810c.h | 6 + sound/usb/quirks.c | 34 +++ 6 files changed, 628 insertions(+) create mode 100644 sound/usb/mixer_s1810c.c create mode 100644 sound/usb/mixer_s1810c.h diff --git a/sound/usb/Makefile b/sound/usb/Makefile index 78edd7d2f..56031026b 100644 --- a/sound/usb/Makefile +++ b/sound/usb/Makefile @@ -13,6 +13,7 @@ snd-usb-audio-objs := card.o \ mixer_scarlett.o \ mixer_scarlett_gen2.o \ mixer_us16x08.o \ + mixer_s1810c.o \ pcm.o \ power.o \ proc.o \ diff --git a/sound/usb/format.c b/sound/usb/format.c index d79db7130..edf3f2a55 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -262,6 +262,23 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip, } for (rate = min; rate <= max; rate += res) { + + /* + * Presonus Studio 1810c anounces invalid + * sampling rates for its streams. + */ + if (chip->usb_id == USB_ID(0x0194f, 0x010c) && + ((rate > 48000 && fp->altsetting == 1) || + ((rate < 88200 || rate > 96000) + && fp->altsetting == 2) || + ((rate < 176400 || rate > 192000) + && fp->altsetting == 3))) { + if (res) + continue; + else + break; + } + if (fp->rate_table) fp->rate_table[nr_rates] = rate; if (!fp->rate_min || rate < fp->rate_min) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 39e27ae6c..71e705fab 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -34,6 +34,7 @@ #include "mixer_scarlett.h" #include "mixer_scarlett_gen2.h" #include "mixer_us16x08.h" +#include "mixer_s1810c.h" #include "helper.h" struct std_mono_table { @@ -2277,6 +2278,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x2a39, 0x3fd4): /* RME */ err = snd_rme_controls_create(mixer); break; + + case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */ + err = snd_sc1810_init_mixer(mixer); + break; } return err; diff --git a/sound/usb/mixer_s1810c.c b/sound/usb/mixer_s1810c.c new file mode 100644 index 000000000..ff86e4aab --- /dev/null +++ b/sound/usb/mixer_s1810c.c @@ -0,0 +1,565 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Presonus Studio 1810c driver for ALSA + * Copyright (C) 2019 Nick Kossifidis <mickflemm(a)gmail.com> + * + * Based on reverse engineering of the communication protocol + * between the windows driver / Univeral Control (UC) program + * and the device, through usbmon. + * + * For now this bypasses the mixer, with all channels split, + * so that the software can mix with greater flexibility. + * It also adds controls for the 4 buttons on the front of + * the device. + */ +#include <linux/usb.h> +#include <linux/usb/audio-v2.h> +#include <sound/control.h> +#include <linux/slab.h> + +#include "usbaudio.h" +#include "mixer.h" +#include "mixer_quirks.h" +#include "helper.h" + +#define SC1810C_CMD_REQ 160 +#define SC1810C_CMD_REQTYPE \ + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT) +#define SC1810C_CMD_F1 0x50617269 +#define SC1810C_CMD_F2 0x14 + +/* + * DISCLAIMER: These are just guesses based on the + * dumps I got. + * + * It seems like a selects between + * device (0), mixer (0x64) and output (0x65) + * + * For mixer (0x64): + * * b selects an input channel (see below). + * * c selects an output channel pair (see below). + * * d selects left (0) or right (1) of that pair. + * * e 0-> disconnect, 0x01000000-> connect, + * 0x0109-> used for stereo-linking channels, + * e is also used for setting volume levels + * in which case b is also set so I guess + * this way it is possible to set the volume + * level from the specified input to the + * specified output. + * + * IN Channels: + * 0 - 7 Mic/Inst/Line (Analog inputs) + * 8 - 9 S/PDIF + * 10 - 17 ADAT + * 18 - 35 DAW (Inputs from the host) + * + * OUT Channels (pairs): + * 0 -> Main out + * 1 -> Line1/2 + * 2 -> Line3/4 + * 3 -> S/PDIF + * 4 -> ADAT? + * + * For device (0): + * * b and c are not used, at least not on the + * dumps I got. + * * d sets the control id to be modified + * (see below). + * * e sets the setting for that control. + * (so for the switches I was interested + * in it's 0/1) + * + * For output (0x65): + * * b is the output channel (see above). + * * c is zero. + * * e I guess the same as with mixer except 0x0109 + * which I didn't see in my dumps. + * + * The two fixed fields have the same values for + * mixer and output but a different set for device. + */ +struct s1810c_ctl_packet { + uint32_t a; + uint32_t b; + uint32_t fixed1; + uint32_t fixed2; + uint32_t c; + uint32_t d; + uint32_t e; +}; + +#define SC1810C_CTL_LINE_SW 0 +#define SC1810C_CTL_MUTE_SW 1 +#define SC1810C_CTL_AB_SW 3 +#define SC1810C_CTL_48V_SW 4 + +#define SC1810C_SET_STATE_REQ 161 +#define SC1810C_SET_STATE_REQTYPE SC1810C_CMD_REQTYPE +#define SC1810C_SET_STATE_F1 0x64656D73 +#define SC1810C_SET_STATE_F2 0xF4 + +#define SC1810C_GET_STATE_REQ 162 +#define SC1810C_GET_STATE_REQTYPE \ + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN) +#define SC1810C_GET_STATE_F1 SC1810C_SET_STATE_F1 +#define SC1810C_GET_STATE_F2 SC1810C_SET_STATE_F2 + +#define SC1810C_STATE_F1_IDX 2 +#define SC1810C_STATE_F2_IDX 3 + +/* + * This packet includes mixer volumes and + * various other fields, it's an extended + * version of ctl_packet, with a and b + * being zero and different f1/f2. + */ +struct s1810c_state_packet { + uint32_t fields[63]; +}; + +#define SC1810C_STATE_48V_SW 58 +#define SC1810C_STATE_LINE_SW 59 +#define SC1810C_STATE_MUTE_SW 60 +#define SC1810C_STATE_AB_SW 62 + +struct s1810_mixer_state { + uint16_t seqnum; + struct mutex usb_mutex; +}; + +static int +snd_s1810c_send_ctl_packet(struct usb_device *dev, uint32_t a, + uint32_t b, uint32_t c, uint32_t d, uint32_t e) +{ + struct s1810c_ctl_packet pkt = { 0 }; + int ret = 0; + + pkt.fixed1 = SC1810C_CMD_F1; + pkt.fixed2 = SC1810C_CMD_F2; + + pkt.a = a; + pkt.b = b; + pkt.c = c; + pkt.d = d; + /* + * Value for settings 0/1 for this + * output channel is always 0 (probably because + * there is no ADAT output on 1810c) + */ + pkt.e = (c == 4) ? 0 : e; + + ret = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), + SC1810C_CMD_REQ, + SC1810C_CMD_REQTYPE, 0, 0, &pkt, sizeof(pkt)); + if (ret < 0) { + dev_warn(&dev->dev, "could not send ctl packet\n"); + return ret; + } + return 0; +} + +/* + * When opening Universal Control the program periodicaly + * sends and receives state packets for syncinc state between + * the device and the host. + * + * Note that if we send only the request to get data back we'll + * get an error, we need to first send an empty state packet and + * then ask to receive a filled. Their seqnumbers must also match. + */ +static int +snd_sc1810c_get_status_field(struct usb_device *dev, + uint32_t *field, int field_idx, uint16_t *seqnum) +{ + struct s1810c_state_packet pkt_out = { 0 }; + struct s1810c_state_packet pkt_in = { 0 }; + int ret = 0; + + pkt_out.fields[SC1810C_STATE_F1_IDX] = SC1810C_SET_STATE_F1; + pkt_out.fields[SC1810C_STATE_F2_IDX] = SC1810C_SET_STATE_F2; + ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), + SC1810C_SET_STATE_REQ, + SC1810C_SET_STATE_REQTYPE, + (*seqnum), 0, &pkt_out, sizeof(pkt_out)); + if (ret < 0) { + dev_warn(&dev->dev, "could not send state packet (%d)\n", ret); + return ret; + } + + ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), + SC1810C_GET_STATE_REQ, + SC1810C_GET_STATE_REQTYPE, + (*seqnum), 0, &pkt_in, sizeof(pkt_in)); + if (ret < 0) { + dev_warn(&dev->dev, "could not get state field %u (%d)\n", + field_idx, ret); + return ret; + } + + (*field) = pkt_in.fields[field_idx]; + (*seqnum)++; + return 0; +} + +/* + * This is what I got when bypassing the mixer with + * all channels split. I'm not 100% sure of what's going + * on, I could probably clean this up based on my observations + * but I prefer to keep the same behavior as the windows driver. + */ +static int snd_s1810c_init_mixer_maps(struct snd_usb_audio *chip) +{ + uint32_t a, b, c, e, n, off; + struct usb_device *dev = chip->dev; + + /* Set initial volume levels ? */ + a = 0x64; + e = 0xbc; + for (n = 0; n < 2; n++) { + off = n * 18; + for (b = off, c = 0; b < 18 + off; b++) { + /* This channel to all outputs ? */ + for (c = 0; c <= 8; c++) { + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } + /* This channel to main output (again) */ + snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); + } + /* + * I noticed on UC that DAW channels have different + * initial volumes (they can go both above and below + * 0db), so this makes sense. + */ + e = 0xb53bf0; + } + + /* Connect analog outputs ? */ + a = 0x65; + e = 0x01000000; + for (b = 1; b < 3; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); + } + snd_s1810c_send_ctl_packet(dev, a, 0, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 0, 0, 1, e); + + /* Set initial volume levels for S/PDIF mappings ? */ + a = 0x64; + e = 0xbc; + c = 3; + for (n = 0; n < 2; n++) { + off = n * 18; + for (b = off; b < 18 + off; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } + e = 0xb53bf0; + } + + /* Connect S/PDIF output ? */ + a = 0x65; + e = 0x01000000; + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); + + /* Connect all outputs (again) ? */ + a = 0x65; + e = 0x01000000; + for (b = 0; b < 4; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, 0, 1, e); + } + + /* Basic routing to get sound out of the device */ + a = 0x64; + e = 0x01000000; + for (c = 0; c < 4; c++) { + for (b = 0; b < 36; b++) { + if ((c == 0 && b == 18) || /* DAW1/2 -> Main */ + (c == 1 && b == 20) || /* DAW3/4 -> Line3/4 */ + (c == 2 && b == 22) || /* DAW4/5 -> Line5/4 */ + (c == 3 && b == 24)) { /* DAW5/6 -> S/PDIF */ + /* Left */ + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0); + b++; + /* Right */ + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } else { + /* Leave the rest disconnected */ + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, 0); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, 0); + } + } + } + + /* Set initial volume levels for S/PDIF (again) ? */ + a = 0x64; + e = 0xbc; + c = 3; + for (n = 0; n < 2; n++) { + off = n * 18; + for (b = off; b < 18 + off; b++) { + snd_s1810c_send_ctl_packet(dev, a, b, c, 0, e); + snd_s1810c_send_ctl_packet(dev, a, b, c, 1, e); + } + e = 0xb53bf0; + } + + /* Connect S/PDIF outputs (again) ? */ + a = 0x65; + e = 0x01000000; + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); + + /* Again ? */ + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 0, e); + snd_s1810c_send_ctl_packet(dev, a, 3, 0, 1, e); + + return 0; +} + +/* + * Sync state with the device and retrieve the requested field, + * whose index is specified in (kctl->private_value & 0xFF), + * from the received fields array. + */ +static int +snd_s1810c_get_switch_state(struct usb_mixer_interface *mixer, + struct snd_kcontrol *kctl, uint32_t *state) +{ + struct snd_usb_audio *chip = mixer->chip; + struct s1810_mixer_state *private = mixer->private_data; + uint32_t field = 0; + uint32_t ctl_idx = (uint32_t) (kctl->private_value & 0xFF); + int ret = 0; + + mutex_lock(&private->usb_mutex); + ret = snd_sc1810c_get_status_field(chip->dev, &field, + ctl_idx, &private->seqnum); + if (ret < 0) + goto unlock; + + *state = field; + unlock: + mutex_unlock(&private->usb_mutex); + return ret ? ret : 0; +} + +/* + * Send a control packet to the device for the control id + * specified in (kctl->private_value >> 8) with value + * specified in (kctl->private_value >> 16). + */ +static int +snd_s1810c_set_switch_state(struct usb_mixer_interface *mixer, + struct snd_kcontrol *kctl) +{ + struct snd_usb_audio *chip = mixer->chip; + struct s1810_mixer_state *private = mixer->private_data; + uint32_t pval = (uint32_t) kctl->private_value; + uint32_t ctl_id = (pval >> 8) & 0xFF; + uint32_t ctl_val = (pval >> 16) & 0x1; + int ret = 0; + + mutex_lock(&private->usb_mutex); + ret = snd_s1810c_send_ctl_packet(chip->dev, 0, 0, 0, ctl_id, ctl_val); + mutex_unlock(&private->usb_mutex); + return ret; +} + +/* Generic get/set/init functions for switch controls */ + +static int +snd_s1810c_switch_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ctl_elem) +{ + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl); + struct usb_mixer_interface *mixer = list->mixer; + uint32_t state = 0; + int ret = 0; + + ret = snd_s1810c_get_switch_state(mixer, kctl, &state); + if (ret < 0) + return ret; + + ctl_elem->value.integer.value[0] = (long)state; + + return 0; +} + +static int +snd_s1810c_switch_set(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ctl_elem) +{ + struct usb_mixer_elem_list *list = snd_kcontrol_chip(kctl); + struct usb_mixer_interface *mixer = list->mixer; + uint32_t curval = 0; + uint32_t newval = (uint32_t) ctl_elem->value.integer.value[0]; + int ret = 0; + + ret = snd_s1810c_get_switch_state(mixer, kctl, &curval); + if (ret < 0) + return 0; + + if (curval == newval) + return 0; + + kctl->private_value &= ~(0x1 << 16); + kctl->private_value |= (unsigned int)(newval & 0x1) << 16; + ret = snd_s1810c_set_switch_state(mixer, kctl); + if (ret < 0) + return 0; + + return 1; +} + +static int +snd_s1810c_switch_init(struct usb_mixer_interface *mixer, + const struct snd_kcontrol_new *new_kctl) +{ + struct snd_kcontrol *kctl; + struct usb_mixer_elem_info *elem; + + elem = kzalloc(sizeof(struct usb_mixer_elem_info), GFP_KERNEL); + if (!elem) + return -ENOMEM; + + elem->head.mixer = mixer; + elem->control = 0; + elem->head.id = 0; + elem->channels = 1; + + kctl = snd_ctl_new1(new_kctl, elem); + if (!kctl) { + kfree(elem); + return -ENOMEM; + } + kctl->private_free = snd_usb_mixer_elem_free; + + return snd_usb_mixer_add_control(&elem->head, kctl); +} + +static int +snd_s1810c_line_sw_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + static const char *const texts[2] = { "Preamp on (Mic/Inst)", + "Preamp off (Line in)" + }; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static struct snd_kcontrol_new snd_s1810c_line_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line 1/2 source type", + .info = snd_s1810c_line_sw_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_LINE_SW | SC1810C_CTL_LINE_SW << 8) +}; + +static struct snd_kcontrol_new snd_s1810c_mute_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Mute Main Out", + .info = snd_ctl_boolean_mono_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_MUTE_SW | SC1810C_CTL_MUTE_SW << 8) +}; + +static struct snd_kcontrol_new snd_s1810c_48v_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "48V Phantom power on Mic inputs", + .info = snd_ctl_boolean_mono_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_48V_SW | SC1810C_CTL_48V_SW << 8) +}; + +static int +snd_s1810c_ab_sw_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + static const char *const texts[2] = { "1/2", + "3/4" + }; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static struct snd_kcontrol_new snd_s1810c_ab_sw = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Headphone 1 source selector", + .info = snd_s1810c_ab_sw_info, + .get = snd_s1810c_switch_get, + .put = snd_s1810c_switch_set, + .private_value = (SC1810C_STATE_AB_SW | SC1810C_CTL_AB_SW << 8) +}; + +static void snd_sc1810_mixer_state_free(struct usb_mixer_interface *mixer) +{ + struct s1810_mixer_state *private = mixer->private_data; + vfree(private); + mixer->private_data = NULL; +} + +/* Entry point, called from mixer_quirks.c */ +int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer) +{ + struct s1810_mixer_state *private = NULL; + struct snd_usb_audio *chip = mixer->chip; + struct usb_device *dev = chip->dev; + int ret = 0; + + /* Run this only once */ + if (!list_empty(&chip->mixer_list)) + return 0; + + dev_info(&dev->dev, + "Presonus Studio 1810c, device_setup: %u\n", chip->setup); + if (chip->setup == 1) + dev_info(&dev->dev, "(8out/18in @ 48KHz)\n"); + else if (chip->setup == 2) + dev_info(&dev->dev, "(6out/8in @ 192KHz)\n"); + else + dev_info(&dev->dev, "(8out/14in @ 96KHz)\n"); + + ret = snd_s1810c_init_mixer_maps(chip); + if (ret < 0) + return ret; + + private = vzalloc(sizeof(struct s1810_mixer_state)); + if (!private) { + dev_err(&dev->dev, "could not allocate mixer state\n"); + return -ENOMEM; + } + + mutex_init(&private->usb_mutex); + + mixer->private_data = private; + mixer->private_free = snd_sc1810_mixer_state_free; + + private->seqnum = 1; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_line_sw); + if (ret < 0) + return ret; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_mute_sw); + if (ret < 0) + return ret; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_48v_sw); + if (ret < 0) + return ret; + + ret = snd_s1810c_switch_init(mixer, &snd_s1810c_ab_sw); + if (ret < 0) + return ret; + return ret; +} diff --git a/sound/usb/mixer_s1810c.h b/sound/usb/mixer_s1810c.h new file mode 100644 index 000000000..2a9ae0922 --- /dev/null +++ b/sound/usb/mixer_s1810c.h @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Presonus Studio 1810c driver for ALSA + * Copyright (C) 2019 Nick Kossifidis <mickflemm(a)gmail.com> + */ +int snd_sc1810_init_mixer(struct usb_mixer_interface *mixer); diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 349e1e529..9a0ceaaf9 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1216,6 +1216,36 @@ static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, return 0; /* keep this altsetting */ } +static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip, + int iface, int altno) +{ + /* + * Playback: + * 1: 6 Analog + 2 S/PDIF + * 2: 6 Analog + 2 S/PDIF + * 3: 6 Analog + * + * Capture: + * 1: 8 Analog + 2 S/PDIF + 8 ADAT + * 2: 8 Analog + 2 S/PDIF + 4 ADAT + * 3: 8 Analog + */ + + /* + * I'll leave 2 as the default one and + * use device_setup to switch to the + * other two. + */ + if (chip->setup == 1 && altno != 1) + return 1; + else if (chip->setup == 2 && altno != 3) + return 1; + else if (altno != 2) + return 1; + + return 0; +} + int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, int iface, int altno) @@ -1229,6 +1259,10 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, /* fasttrackpro usb: skip altsets incompatible with device_setup */ if (chip->usb_id == USB_ID(0x0763, 0x2012)) return fasttrackpro_skip_setting_quirk(chip, iface, altno); + /* presonus studio 1810c: skip altsets incompatible with device_setup */ + if (chip->usb_id == USB_ID(0x0194f, 0x010c)) + return s1810c_skip_setting_quirk(chip, iface, altno); + return 0; } -- 2.23.0

4 4