October 2019 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v4 1/2] PCI: Add a helper to check Power Resource Requirements _PR3 existence
by Kai-Heng Feng 17 Oct '19

17 Oct '19

A driver may want to know the existence of _PR3, to choose different runtime suspend behavior. A user will be add in next patch. This is mostly the same as nouveau_pr3_present(). Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- v4: - Let caller to find its upstream port device. drivers/pci/pci.c | 16 ++++++++++++++++ include/linux/pci.h | 2 ++ 2 files changed, 18 insertions(+) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e7982af9a5d8..d03f624d8928 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5856,6 +5856,22 @@ int pci_set_vga_state(struct pci_dev *dev, bool decode, return 0; } +bool pci_pr3_present(struct pci_dev *pdev) +{ + struct acpi_device *adev; + + if (acpi_disabled) + return false; + + adev = ACPI_COMPANION(&pdev->dev); + if (!adev) + return false; + + return adev->power.flags.power_resources && + acpi_has_method(adev->handle, "_PR3"); +} +EXPORT_SYMBOL_GPL(pci_pr3_present); + /** * pci_add_dma_alias - Add a DMA devfn alias for a device * @dev: the PCI device for which alias is added diff --git a/include/linux/pci.h b/include/linux/pci.h index f9088c89a534..1d15c5d49cdd 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -2310,9 +2310,11 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus); void pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *)); +bool pci_pr3_present(struct pci_dev *pdev); #else static inline struct irq_domain * pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; } +static bool pci_pr3_present(struct pci_dev *pdev) { return false; } #endif #ifdef CONFIG_EEH -- 2.17.1

3 5

[alsa-devel] [PATCH v5.3] ASoC: sgtl5000: add ADC mute control
by Richard Leitner 17 Oct '19

17 Oct '19

From: Oleksandr Suvorov <oleksandr.suvorov(a)toradex.com> Upstream commit 631bc8f0134a ("ASoC: sgtl5000: Fix of unmute outputs on probe"), which is e9f621efaebd in v5.3 replaced snd_soc_component_write with snd_soc_component_update_bits and therefore no longer cleared the MUTE_ADC flag. This caused the ADC to stay muted and recording doesn't work any longer. This patch fixes this problem by adding a Switch control for MUTE_ADC. commit 694b14554d75 ("ASoC: sgtl5000: add ADC mute control") upstream This control mute/unmute the ADC input of SGTL5000 using its CHIP_ANA_CTRL register. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov(a)toradex.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler(a)toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk(a)toradex.com> Reviewed-by: Fabio Estevam <festevam(a)gmail.com> Link: https://lore.kernel.org/r/20190719100524.23300-5-oleksandr.suvorov@toradex.… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Richard Leitner <richard.leitner(a)skidata.com> Fixes: e9f621efaebd ("ASoC: sgtl5000: Fix of unmute outputs on probe") --- sound/soc/codecs/sgtl5000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 3f28e7862b5b..b65232521ea8 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -720,6 +720,7 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { SGTL5000_CHIP_ANA_ADC_CTRL, 8, 1, 0, capture_6db_attenuate), SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0), + SOC_SINGLE("Capture Switch", SGTL5000_CHIP_ANA_CTRL, 0, 1, 1), SOC_DOUBLE_TLV("Headphone Playback Volume", SGTL5000_CHIP_ANA_HP_CTRL, -- 2.21.0

2 1

[alsa-devel] [PATCH v6 0/7] ASoC: sun4i-i2s: Updates to the driver
by codekipper＠gmail.com 16 Oct '19

16 Oct '19

From: Marcus Cooper <codekipper(a)gmail.com> Hi All, To be able to add support for the Allwinner H6 I've changed some of the original reg fields into function calls as this made it easier to setup for multi-channel audio especially across different SoCs. I've also stripped out all the other patches unrelated to this which I will deliver after support for the H6 has gone in. These other patches are required for HDMI audio which is driving this patchset and they can be found here https://github.com/codekipper/linux-sunxi/commits/upstream-i2s BR, CK --- v6 changes compared to v5 are: - rebased onto the recent tdm delivery - stripped out patches not required for the H6 delivery v5 changes compared to v4 are: - removed delivered patches. - Added more details to commit messages. - replaced some reg fields with function calls. - Added DSP_A and DSP_B support for H3 and later SoCs. - Added support for the Allwinner H6. v4 changes compared to v3 are: - Moved patches around so that the more controversial of patches are at the top of the stack. - Added more details to commit messages. - Fixed 20bit audio PCM format to use 4 bytes. - Reduced number of flags used to indicate a new SoC. v3 changes compared to v2 are: - added back slave mode changes - added back the use of tdm properties - changes to regmap and caching - removed loopback functionality - fixes to the channel offset mask v2 changes compared to v1 are: - removed slave mode changes which didn't set mclk and bclk div. - removed use of tdm and now use a dedicated property. - fix commit message to better explain reason for sign extending - add divider calculations for newer SoCs. - add support for multi-lane i2s data output. - add support for 20, 24 and 32 bit samples. - add loopback property so blocks can be tested without a codec. --- Jernej Skrabec (2): dt-bindings: ASoC: sun4i-i2s: Add H6 compatible ASoC: sun4i-i2s: Add support for H6 I2S Marcus Cooper (5): ASoC: sun4i-i2s: Move channel select offset ASoC: sun4i-i2s: Add functions for RX and TX channel offsets ASoC: sun4i-i2s: Add functions for RX and TX channel enables ASoC: sun4i-i2s: Add functions for RX and TX channel selects ASoC: sun4i-i2s: Add functions for RX and TX channel mapping .../sound/allwinner,sun4i-a10-i2s.yaml | 2 + sound/soc/sunxi/sun4i-i2s.c | 337 ++++++++++++++++-- 2 files changed, 305 insertions(+), 34 deletions(-) -- 2.23.0

3 13

[alsa-devel] [PATCH] ASoC: wm8958: use <asm/unaligned.h> to simplify code
by Ben Dooks (Codethink) 16 Oct '19

16 Oct '19

Simplify the memcpy/be32_to_cpu() code by simply using get_unaligned_be32() throughout and makes the code nicer to look at. This fixes the following warnings from sparse: sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64 sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32 sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32 Signed-off-by: Ben Dooks <ben.dooks(a)codethink.co.uk> --- Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: patches(a)opensource.cirrus.com Cc: alsa-devel(a)alsa-project.org --- sound/soc/codecs/wm8958-dsp2.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c index 18535b326680..ca42445b649d 100644 --- a/sound/soc/codecs/wm8958-dsp2.c +++ b/sound/soc/codecs/wm8958-dsp2.c @@ -25,6 +25,8 @@ #include <linux/mfd/wm8994/pdata.h> #include <linux/mfd/wm8994/gpio.h> +#include <asm/unaligned.h> + #include "wm8994.h" #define WM_FW_BLOCK_INFO 0xff @@ -58,18 +60,15 @@ static int wm8958_dsp2_fw(struct snd_soc_component *component, const char *name, } if (memcmp(fw->data, "WMFW", 4) != 0) { - memcpy(&data32, fw->data, sizeof(data32)); - data32 = be32_to_cpu(data32); + data32 = get_unaligned_be32(fw->data); dev_err(component->dev, "%s: firmware has bad file magic %08x\n", name, data32); goto err; } - memcpy(&data32, fw->data + 4, sizeof(data32)); - len = be32_to_cpu(data32); + len = get_unaligned_be32(fw->data + 4); + data32 = get_unaligned_be32(fw->data + 8); - memcpy(&data32, fw->data + 8, sizeof(data32)); - data32 = be32_to_cpu(data32); if ((data32 >> 24) & 0xff) { dev_err(component->dev, "%s: unsupported firmware version %d\n", name, (data32 >> 24) & 0xff); @@ -87,9 +86,8 @@ static int wm8958_dsp2_fw(struct snd_soc_component *component, const char *name, } if (check) { - memcpy(&data64, fw->data + 24, sizeof(u64)); - dev_info(component->dev, "%s timestamp %llx\n", - name, be64_to_cpu(data64)); + data64 = get_unaligned_be64(fw->data + 24); + dev_info(component->dev, "%s timestamp %llx\n", name, data64); } else { snd_soc_component_write(component, 0x102, 0x2); snd_soc_component_write(component, 0x900, 0x2); @@ -104,8 +102,7 @@ static int wm8958_dsp2_fw(struct snd_soc_component *component, const char *name, goto err; } - memcpy(&data32, data + 4, sizeof(data32)); - block_len = be32_to_cpu(data32); + block_len = get_unaligned_be32(data + 4); if (block_len + 8 > len) { dev_err(component->dev, "%zd byte block longer than file\n", block_len); @@ -116,8 +113,7 @@ static int wm8958_dsp2_fw(struct snd_soc_component *component, const char *name, goto err; } - memcpy(&data32, data, sizeof(data32)); - data32 = be32_to_cpu(data32); + data32 = get_unaligned_be32(data); switch ((data32 >> 24) & 0xff) { case WM_FW_BLOCK_INFO: -- 2.23.0

3 2

[alsa-devel] [PATCH] ASoC: dt-bindings: rt1011: add r0 and temperature device property
by shumingf＠realtek.com 16 Oct '19

16 Oct '19

From: Shuming Fan <shumingf(a)realtek.com> Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area where keeps data whether factory reset or OS update. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- Documentation/devicetree/bindings/sound/rt1011.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/rt1011.txt b/Documentation/devicetree/bindings/sound/rt1011.txt index 35a23e60d679..02d53b9aa247 100644 --- a/Documentation/devicetree/bindings/sound/rt1011.txt +++ b/Documentation/devicetree/bindings/sound/rt1011.txt @@ -20,6 +20,14 @@ Required properties: | 1 | 1 | 0x3b | ------------------------------------- +Optional properties: + +- realtek,temperature_calib + u32. The temperature was measured while doing the calibration. Units: Celsius degree + +- realtek,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + Pins on the device (for linking into audio routes) for RT1011: * SPO @@ -29,4 +37,6 @@ Example: rt1011: codec@38 { compatible = "realtek,rt1011"; reg = <0x38>; + realtek,temperature_calib = <25>; + realtek,r0_calib = <0x224050>; }; -- 2.23.0

2 3

[alsa-devel] [PATCH v2] ASoC: rt1011: set tx/rx slots from tx/rx_mask in TDM case
by shumingf＠realtek.com 16 Oct '19

16 Oct '19

From: Shuming Fan <shumingf(a)realtek.com> The TX/RX slot configuration use tx/rx_mask which requested by the machine driver. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt1011.c | 142 ++++++++++++++++++++++++++++++++++++-- sound/soc/codecs/rt1011.h | 23 ++++++ 2 files changed, 160 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index be1e276e3631..b927e61b32df 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -1805,8 +1805,8 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai, struct snd_soc_component *component = dai->component; struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); - unsigned int val = 0, tdm_en = 0; - int ret = 0; + unsigned int val = 0, tdm_en = 0, rx_slotnum, tx_slotnum; + int ret = 0, first_bit, last_bit; snd_soc_dapm_mutex_lock(dapm); if (rx_mask || tx_mask) @@ -1829,6 +1829,7 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai, break; default: ret = -EINVAL; + goto _set_tdm_err_; } switch (slot_width) { @@ -1848,6 +1849,135 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai, break; default: ret = -EINVAL; + goto _set_tdm_err_; + } + + /* Rx slot configuration */ + rx_slotnum = hweight_long(rx_mask); + first_bit = find_next_bit((unsigned long *)&rx_mask, 32, 0); + if (rx_slotnum > 1 || rx_slotnum == 0) { + ret = -EINVAL; + dev_dbg(component->dev, "too many rx slots or zero slot\n"); + goto _set_tdm_err_; + } + + switch (first_bit) { + case 0: + case 2: + case 4: + case 6: + snd_soc_component_update_bits(component, + RT1011_CROSS_BQ_SET_1, RT1011_MONO_LR_SEL_MASK, + RT1011_MONO_L_CHANNEL); + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_4, + RT1011_TDM_I2S_TX_L_DAC1_1_MASK | + RT1011_TDM_I2S_TX_R_DAC1_1_MASK, + (first_bit << RT1011_TDM_I2S_TX_L_DAC1_1_SFT) | + ((first_bit+1) << RT1011_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + case 1: + case 3: + case 5: + case 7: + snd_soc_component_update_bits(component, + RT1011_CROSS_BQ_SET_1, RT1011_MONO_LR_SEL_MASK, + RT1011_MONO_R_CHANNEL); + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_4, + RT1011_TDM_I2S_TX_L_DAC1_1_MASK | + RT1011_TDM_I2S_TX_R_DAC1_1_MASK, + ((first_bit-1) << RT1011_TDM_I2S_TX_L_DAC1_1_SFT) | + (first_bit << RT1011_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + default: + ret = -EINVAL; + goto _set_tdm_err_; + } + + /* Tx slot configuration */ + tx_slotnum = hweight_long(tx_mask); + first_bit = find_next_bit((unsigned long *)&tx_mask, 32, 0); + last_bit = find_last_bit((unsigned long *)&tx_mask, 32); + if (tx_slotnum > 2 || (last_bit-first_bit) > 1) { + ret = -EINVAL; + dev_dbg(component->dev, "too many tx slots or tx slot location error\n"); + goto _set_tdm_err_; + } + + if (tx_slotnum == 1) { + snd_soc_component_update_bits(component, RT1011_TDM1_SET_2, + RT1011_TDM_I2S_DOCK_ADCDAT_LEN_1_MASK | + RT1011_TDM_ADCDAT1_DATA_LOCATION, first_bit); + switch (first_bit) { + case 1: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC1_1_MASK, + RT1011_TDM_I2S_RX_ADC1_1_LL); + break; + case 3: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC2_1_MASK, + RT1011_TDM_I2S_RX_ADC2_1_LL); + break; + case 5: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC3_1_MASK, + RT1011_TDM_I2S_RX_ADC3_1_LL); + break; + case 7: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC4_1_MASK, + RT1011_TDM_I2S_RX_ADC4_1_LL); + break; + case 0: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC1_1_MASK, 0); + break; + case 2: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC2_1_MASK, 0); + break; + case 4: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC3_1_MASK, 0); + break; + case 6: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_3, + RT1011_TDM_I2S_RX_ADC4_1_MASK, 0); + break; + default: + ret = -EINVAL; + dev_dbg(component->dev, + "tx slot location error\n"); + goto _set_tdm_err_; + } + } else if (tx_slotnum == 2) { + switch (first_bit) { + case 0: + case 2: + case 4: + case 6: + snd_soc_component_update_bits(component, + RT1011_TDM1_SET_2, + RT1011_TDM_I2S_DOCK_ADCDAT_LEN_1_MASK | + RT1011_TDM_ADCDAT1_DATA_LOCATION, + RT1011_TDM_I2S_DOCK_ADCDAT_2CH | first_bit); + break; + default: + ret = -EINVAL; + dev_dbg(component->dev, + "tx slot location should be paired and start from slot0/2/4/6\n"); + goto _set_tdm_err_; + } } snd_soc_component_update_bits(component, RT1011_TDM1_SET_1, @@ -1860,10 +1990,12 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai, RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en); snd_soc_component_update_bits(component, RT1011_TDM2_SET_2, RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en); - snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET, - RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG, - RT1011_ADCDAT1_OUTPUT | RT1011_ADCDAT2_OUTPUT); + if (tx_slotnum) + snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET, + RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG, + RT1011_ADCDAT1_OUTPUT | RT1011_ADCDAT2_OUTPUT); +_set_tdm_err_: snd_soc_dapm_mutex_unlock(dapm); return ret; } diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h index 2d65983f3d0f..3f7dea1191ad 100644 --- a/sound/soc/codecs/rt1011.h +++ b/sound/soc/codecs/rt1011.h @@ -460,6 +460,23 @@ #define RT1011_TDM_I2S_DOCK_EN_1_MASK (0x1 << 3) #define RT1011_TDM_I2S_DOCK_EN_1_SFT 3 #define RT1011_TDM_I2S_DOCK_EN_1 (0x1 << 3) +#define RT1011_TDM_ADCDAT1_DATA_LOCATION (0x7 << 0) + +/* TDM1 Setting-3 (0x0118) */ +#define RT1011_TDM_I2S_RX_ADC1_1_MASK (0x3 << 6) +#define RT1011_TDM_I2S_RX_ADC2_1_MASK (0x3 << 4) +#define RT1011_TDM_I2S_RX_ADC3_1_MASK (0x3 << 2) +#define RT1011_TDM_I2S_RX_ADC4_1_MASK (0x3 << 0) +#define RT1011_TDM_I2S_RX_ADC1_1_LL (0x2 << 6) +#define RT1011_TDM_I2S_RX_ADC2_1_LL (0x2 << 4) +#define RT1011_TDM_I2S_RX_ADC3_1_LL (0x2 << 2) +#define RT1011_TDM_I2S_RX_ADC4_1_LL (0x2 << 0) + +/* TDM1 Setting-4 (0x011a) */ +#define RT1011_TDM_I2S_TX_L_DAC1_1_MASK (0x7 << 12) +#define RT1011_TDM_I2S_TX_R_DAC1_1_MASK (0x7 << 8) +#define RT1011_TDM_I2S_TX_L_DAC1_1_SFT 12 +#define RT1011_TDM_I2S_TX_R_DAC1_1_SFT 8 /* TDM2 Setting-2 (0x0120) */ #define RT1011_TDM_I2S_DOCK_ADCDAT_LEN_2_MASK (0x7 << 13) @@ -585,6 +602,12 @@ #define RT1011_STP_T0_EN_BIT 6 #define RT1011_STP_T0_EN (0x1 << 6) +/* Cross Biquad Setting-1 (0x0702) */ +#define RT1011_MONO_LR_SEL_MASK (0x3 << 5) +#define RT1011_MONO_L_CHANNEL (0x0 << 5) +#define RT1011_MONO_R_CHANNEL (0x1 << 5) +#define RT1011_MONO_LR_MIX_CHANNEL (0x2 << 5) + /* ClassD Internal Setting-1 (0x1300) */ #define RT1011_DRIVER_READY_SPK (0x1 << 12) #define RT1011_DRIVER_READY_SPK_BIT 12 -- 2.23.0

2 1

[alsa-devel] [PATCH] ASoC: rt1011: Read and apply r0 and temperature device property
by shumingf＠realtek.com 16 Oct '19

16 Oct '19

From: Shuming Fan <shumingf(a)realtek.com> Typically, the r0 (calibration data) and temperature were measured in the factory. This information is written into the non-volatile area where keeps data whether factory reset or OS update. In Chromium OS case, the coreboot will read the info from VPD and create the device property for each rt1011. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt1011.c | 41 ++++++++++++++++++++++++++++++++++++++- sound/soc/codecs/rt1011.h | 1 + 2 files changed, 41 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index b927e61b32df..ad049cfddcb0 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -2328,8 +2328,12 @@ static void rt1011_calibration_work(struct work_struct *work) struct rt1011_priv *rt1011 = container_of(work, struct rt1011_priv, cali_work); struct snd_soc_component *component = rt1011->component; + unsigned int r0_integer, r0_factor, format; - rt1011_calibrate(rt1011, 1); + if (rt1011->r0_calib) + rt1011_calibrate(rt1011, 0); + else + rt1011_calibrate(rt1011, 1); /* * This flag should reset after booting. @@ -2340,6 +2344,39 @@ static void rt1011_calibration_work(struct work_struct *work) /* initial */ rt1011_reg_init(component); + + /* Apply temperature and calibration data from device property */ + if (rt1011->temperature_calib) { + snd_soc_component_update_bits(component, + RT1011_STP_INITIAL_RESISTANCE_TEMP, 0x3ff, + (rt1011->temperature_calib << 2)); + } + + if (rt1011->r0_calib) { + rt1011->r0_reg = rt1011->r0_calib; + + format = 2147483648U; /* 2^24 * 128 */ + r0_integer = format / rt1011->r0_reg / 128; + r0_factor = ((format / rt1011->r0_reg * 100) / 128) + - (r0_integer * 100); + dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n", + r0_integer, r0_factor, rt1011->r0_reg); + + rt1011_r0_load(rt1011); + } +} + +static int rt1011_parse_dp(struct rt1011_priv *rt1011, struct device *dev) +{ + device_property_read_u32(dev, "realtek,temperature_calib", + &rt1011->temperature_calib); + device_property_read_u32(dev, "realtek,r0_calib", + &rt1011->r0_calib); + + dev_dbg(dev, "%s: r0_calib: 0x%x, temperture_calib: 0x%x", + __func__, rt1011->r0_calib, rt1011->temperature_calib); + + return 0; } static int rt1011_i2c_probe(struct i2c_client *i2c, @@ -2356,6 +2393,8 @@ static int rt1011_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, rt1011); + rt1011_parse_dp(rt1011, &i2c->dev); + rt1011->regmap = devm_regmap_init_i2c(i2c, &rt1011_regmap); if (IS_ERR(rt1011->regmap)) { ret = PTR_ERR(rt1011->regmap); diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h index 3f7dea1191ad..68fadc15fa8c 100644 --- a/sound/soc/codecs/rt1011.h +++ b/sound/soc/codecs/rt1011.h @@ -690,6 +690,7 @@ struct rt1011_priv { int bq_drc_set; unsigned int r0_reg, cali_done; + unsigned int r0_calib, temperature_calib; int recv_spk_mode; }; -- 2.23.0

3 3

[alsa-devel] [PATCH] ASoC: sof: include types.h at header.h
by Kuninori Morimoto 16 Oct '19

16 Oct '19

Content-Transfer-Encoding: 8bit Without <types.h> we will get these error linux/include/sound/sof/header.h:125:2: error: unknown type name ‘uint32_t’uint32_t size; linux/include/sound/sof/header.h:136:2: error: unknown type name ‘uint32_t’uint32_t size; linux/include/sound/sof/header.h:137:2: error: unknown type name ‘uint32_t’uint32_t cmd; ... linux/include/sound/sof/dai-imx.h:18:2: error: unknown type name ‘uint16_t’uint16_t reserved1; linux/include/sound/sof/dai-imx.h:30:2: error: unknown type name ‘uint16_t’uint16_t tdm_slot_width; linux/include/sound/sof/dai-imx.h:31:2: error: unknown type name ‘uint16_t’uint16_t reserved2; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- include/sound/sof/header.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/sound/sof/header.h b/include/sound/sof/header.h index 10f00c0..332143f 100644 --- a/include/sound/sof/header.h +++ b/include/sound/sof/header.h @@ -9,6 +9,7 @@ #ifndef __INCLUDE_SOUND_SOF_HEADER_H__ #define __INCLUDE_SOUND_SOF_HEADER_H__ +#include <linux/types.h> #include <uapi/sound/sof/abi.h> /** \addtogroup sof_uapi uAPI -- 2.7.4

4 10

Re: [alsa-devel] [PATCH] ASoC: rt1011: Read and apply r0 and temperature device property
by Mark Brown 16 Oct '19

16 Oct '19

On Wed, Oct 16, 2019 at 11:28:47AM +0000, Shuming [范書銘] wrote: > > These are new DT bindings and need to be added to the binding document. > Sure, could I send another patch for it? Yes, the DT bindings should go in a separate patch anyway.

1 0

Re: [alsa-devel] [PATCH] ASoC: rt1011: Read and apply r0 and temperature device property
by Cheng-yi Chiang 16 Oct '19

16 Oct '19

On Wed, Oct 16, 2019 at 7:29 PM Shuming [范書銘] <shumingf(a)realtek.com> wrote: > > > On Wed, Oct 16, 2019 at 04:58:45PM +0800, shumingf(a)realtek.com wrote: > > > > > +static int rt1011_parse_dp(struct rt1011_priv *rt1011, struct device > > > +*dev) { > > > + device_property_read_u32(dev, "realtek,temperature_calib", > > > + &rt1011->temperature_calib); > > > + device_property_read_u32(dev, "realtek,r0_calib", > > > + &rt1011->r0_calib); > > > > These are new DT bindings and need to be added to the binding document. > > Sure, could I send another patch for it? > > > ------Please consider the environment before printing this e-mail. Hi Shuming, Yes, you will need a patch before this one to add the binding documentation. Thanks!

1 0