August 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: dpcm: Properly initialise hw->rate_max
by Charles Keepax 28 Aug '18

28 Aug '18

If the CPU DAI does not initialise rate_max, say if using using KNOT or CONTINUOUS, then the rate_max field will be initialised to 0. A value of zero in the rate_max field of the hardware runtime will cause the sound card to support no sample rates at all. Obviously this is not desired, just a different mechanism is being used to apply the constraints. As such update the setting of rate_max in dpcm_init_runtime_hw to be consistent with the non-DPCM cases and set rate_max to UINT_MAX if nothing is defined on the CPU DAI. Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com> --- sound/soc/soc-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index e8b98bfd4cf1..eb6f4f1b65a9 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1680,7 +1680,7 @@ static void dpcm_init_runtime_hw(struct snd_pcm_runtime *runtime, struct snd_soc_pcm_stream *stream) { runtime->hw.rate_min = stream->rate_min; - runtime->hw.rate_max = stream->rate_max; + runtime->hw.rate_max = min_not_zero(stream->rate_max, UINT_MAX); runtime->hw.channels_min = stream->channels_min; runtime->hw.channels_max = stream->channels_max; if (runtime->hw.formats) -- 2.11.0

2 1

[alsa-devel] [PATCH] ASoC: meson: imply clock and reset controllers
by Jerome Brunet 28 Aug '18

28 Aug '18

Add audio clock controller and ARB reset controller module implication for the device using them Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> --- sound/soc/meson/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 8af8bc358a90..2ccbadc387de 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -4,6 +4,8 @@ menu "ASoC support for Amlogic platforms" config SND_MESON_AXG_FIFO tristate select REGMAP_MMIO + imply COMMON_CLK_AXG_AUDIO + imply RESET_MESON_AUDIO_ARB config SND_MESON_AXG_FRDDR tristate "Amlogic AXG Playback FIFO support" @@ -22,6 +24,7 @@ config SND_MESON_AXG_TODDR config SND_MESON_AXG_TDM_FORMATTER tristate select REGMAP_MMIO + imply COMMON_CLK_AXG_AUDIO config SND_MESON_AXG_TDM_INTERFACE tristate @@ -58,6 +61,7 @@ config SND_MESON_AXG_SPDIFOUT tristate "Amlogic AXG SPDIF Output Support" select SND_PCM_IEC958 imply SND_SOC_SPDIF + imply COMMON_CLK_AXG_AUDIO help Select Y or M to add support for SPDIF output serializer embedded in the Amlogic AXG SoC family -- 2.17.1

2 1

[alsa-devel] [PATCH] ASoC: meson: axg-fifo: report interrupt request failure
by Jerome Brunet 28 Aug '18

28 Aug '18

Return value of request_irq() was irgnored. Fix this and report the failure if any Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver") Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> --- sound/soc/meson/axg-fifo.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c index 30262550e37b..0e4f65e654c4 100644 --- a/sound/soc/meson/axg-fifo.c +++ b/sound/soc/meson/axg-fifo.c @@ -203,6 +203,8 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss) ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0, dev_name(dev), ss); + if (ret) + return ret; /* Enable pclk to access registers and clock the fifo ip */ ret = clk_prepare_enable(fifo->pclk); -- 2.17.1

2 1

[alsa-devel] [PATCH] ASoC: meson: axg-tdm: restrict formats depending on slot width
by Jerome Brunet 28 Aug '18

28 Aug '18

Restrict the formats possible on the TDM interface depending on the width of the TDM slot and let dpcm merging do the rest. Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet <jbrunet(a)baylibre.com> --- sound/soc/meson/axg-tdm-interface.c | 50 +++++++++++++++++------------ 1 file changed, 29 insertions(+), 21 deletions(-) diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c index 7b8baf46d968..585ce030b79b 100644 --- a/sound/soc/meson/axg-tdm-interface.c +++ b/sound/soc/meson/axg-tdm-interface.c @@ -42,6 +42,7 @@ int axg_tdm_set_tdm_slots(struct snd_soc_dai *dai, u32 *tx_mask, struct axg_tdm_stream *rx = (struct axg_tdm_stream *) dai->capture_dma_data; unsigned int tx_slots, rx_slots; + unsigned int fmt = 0; tx_slots = axg_tdm_slots_total(tx_mask); rx_slots = axg_tdm_slots_total(rx_mask); @@ -52,38 +53,45 @@ int axg_tdm_set_tdm_slots(struct snd_soc_dai *dai, u32 *tx_mask, return -EINVAL; } - /* - * Amend the dai driver channel number and let dpcm channel merge do - * its job - */ - if (tx) { - tx->mask = tx_mask; - dai->driver->playback.channels_max = tx_slots; - } - - if (rx) { - rx->mask = rx_mask; - dai->driver->capture.channels_max = rx_slots; - } - iface->slots = slots; switch (slot_width) { case 0: - /* defaults width to 32 if not provided */ - iface->slot_width = 32; - break; - case 8: - case 16: - case 24: + slot_width = 32; + /* Fall-through */ case 32: - iface->slot_width = slot_width; + fmt |= SNDRV_PCM_FMTBIT_S32_LE; + /* Fall-through */ + case 24: + fmt |= SNDRV_PCM_FMTBIT_S24_LE; + fmt |= SNDRV_PCM_FMTBIT_S20_LE; + /* Fall-through */ + case 16: + fmt |= SNDRV_PCM_FMTBIT_S16_LE; + /* Fall-through */ + case 8: + fmt |= SNDRV_PCM_FMTBIT_S8; break; default: dev_err(dai->dev, "unsupported slot width: %d\n", slot_width); return -EINVAL; } + iface->slot_width = slot_width; + + /* Amend the dai driver and let dpcm merge do its job */ + if (tx) { + tx->mask = tx_mask; + dai->driver->playback.channels_max = tx_slots; + dai->driver->playback.formats = fmt; + } + + if (rx) { + rx->mask = rx_mask; + dai->driver->capture.channels_max = rx_slots; + dai->driver->capture.formats = fmt; + } + return 0; } EXPORT_SYMBOL_GPL(axg_tdm_set_tdm_slots); -- 2.17.1

2 1

[alsa-devel] [v2] ASoC: max98373: Added 10ms sleep after amp software reset
by Ryan Lee 28 Aug '18

28 Aug '18

Signed-off-by: Ryan Lee <ryans.lee(a)maximintegrated.com> --- Changes since v1 : Applied usleep_range intead of using mdelay Changes : Applied 10ms delay after amp software reset. 10ms guard time is required for stability. sound/soc/codecs/max98373.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index 2764fae..6aaff03 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -730,6 +730,7 @@ static int max98373_probe(struct snd_soc_component *component) /* Software Reset */ regmap_write(max98373->regmap, MAX98373_R2000_SW_RESET, MAX98373_SOFT_RESET); + usleep_range(10000, 11000); /* IV default slot configuration */ regmap_write(max98373->regmap, @@ -818,6 +819,7 @@ static int max98373_resume(struct device *dev) regmap_write(max98373->regmap, MAX98373_R2000_SW_RESET, MAX98373_SOFT_RESET); + usleep_range(10000, 11000); regcache_cache_only(max98373->regmap, false); regcache_sync(max98373->regmap); return 0; -- 2.7.4

2 1

[alsa-devel] Applied "ASoC: rt5682: Change DAC/ADC volume scale" to the asoc tree
by Mark Brown 28 Aug '18

28 Aug '18

The patch ASoC: rt5682: Change DAC/ADC volume scale has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 7509487785d7a2bf3606cf26710f0ca29e9ca94d Mon Sep 17 00:00:00 2001 From: Shuming Fan <shumingf(a)realtek.com> Date: Fri, 24 Aug 2018 10:52:19 +0800 Subject: [PATCH] ASoC: rt5682: Change DAC/ADC volume scale The step of DAC/ADC volume scale changes from 0.375dB to 0.75dB Signed-off-by: Shuming Fan <shumingf(a)realtek.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- sound/soc/codecs/rt5682.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 640d400ca013..afe7d5b19313 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -750,8 +750,8 @@ static bool rt5682_readable_register(struct device *dev, unsigned int reg) } static const DECLARE_TLV_DB_SCALE(hp_vol_tlv, -2250, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0); +static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0); /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */ @@ -1114,7 +1114,7 @@ static const struct snd_kcontrol_new rt5682_snd_controls[] = { /* DAC Digital Volume */ SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5682_DAC1_DIG_VOL, - RT5682_L_VOL_SFT, RT5682_R_VOL_SFT, 175, 0, dac_vol_tlv), + RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 86, 0, dac_vol_tlv), /* IN Boost Volume */ SOC_SINGLE_TLV("CBJ Boost Volume", RT5682_CBJ_BST_CTRL, @@ -1124,7 +1124,7 @@ static const struct snd_kcontrol_new rt5682_snd_controls[] = { SOC_DOUBLE("STO1 ADC Capture Switch", RT5682_STO1_ADC_DIG_VOL, RT5682_L_MUTE_SFT, RT5682_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("STO1 ADC Capture Volume", RT5682_STO1_ADC_DIG_VOL, - RT5682_L_VOL_SFT, RT5682_R_VOL_SFT, 127, 0, adc_vol_tlv), + RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 63, 0, adc_vol_tlv), /* ADC Boost Volume Control */ SOC_DOUBLE_TLV("STO1 ADC Boost Gain Volume", RT5682_STO1_ADC_BOOST, -- 2.18.0

1 0

[alsa-devel] [PATCH 1/2] ASoC: rt5682: Update calibration function
by shumingf＠realtek.com 28 Aug '18

28 Aug '18

From: Shuming Fan <shumingf(a)realtek.com> New calibration sequence allows rt5682 do calibration without MCLK. Signed-off-by: Shuming Fan <shumingf(a)realtek.com> --- sound/soc/codecs/rt5682.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 640d400..0ea2759 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -2454,27 +2454,15 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682) regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xa2bf); usleep_range(15000, 20000); regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xf2bf); - regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); - regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x8001); - regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); - regmap_write(rt5682->regmap, RT5682_STO1_DAC_MIXER, 0x2080); - regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0x4040); - regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0069); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0300); + regmap_write(rt5682->regmap, RT5682_GLB_CLK, 0x8000); + regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x0100); regmap_write(rt5682->regmap, RT5682_CHOP_DAC, 0x3000); - regmap_write(rt5682->regmap, RT5682_HP_CTRL_2, 0x6000); - regmap_write(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, 0x0f26); - regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x7f05); - regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0x686c); - regmap_write(rt5682->regmap, RT5682_CAL_REC, 0x0d0d); - regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_9, 0x000f); - regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x8d01); regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_2, 0x0321); regmap_write(rt5682->regmap, RT5682_HP_LOGIC_CTRL_2, 0x0004); regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_1, 0x7c00); regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_3, 0x06a1); - regmap_write(rt5682->regmap, RT5682_A_DAC1_MUX, 0x0311); - regmap_write(rt5682->regmap, RT5682_RESET_HPF_CTRL, 0x0000); - regmap_write(rt5682->regmap, RT5682_ADC_STO1_HP_CTRL_1, 0x3320); + regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_1, 0x7c00); regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_1, 0xfc00); @@ -2490,7 +2478,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682) pr_err("HP Calibration Failure\n"); /* restore settings */ - regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0xc0c4); + regmap_write(rt5682->regmap, RT5682_GLB_CLK, 0x0000); regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x0000); mutex_unlock(&rt5682->calibrate_mutex); -- 2.7.4

2 1

[alsa-devel] [PATCH] ASoC: wm8804: Add ACPI support
by Pierre-Louis Bossart 28 Aug '18

28 Aug '18

HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier. This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform. The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> --- sound/soc/codecs/wm8804-i2c.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8804-i2c.c b/sound/soc/codecs/wm8804-i2c.c index f27464c2c5ba..79541960f45d 100644 --- a/sound/soc/codecs/wm8804-i2c.c +++ b/sound/soc/codecs/wm8804-i2c.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/i2c.h> +#include <linux/acpi.h> #include "wm8804.h" @@ -40,17 +41,29 @@ static const struct i2c_device_id wm8804_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8804_i2c_id); +#if defined(CONFIG_OF) static const struct of_device_id wm8804_of_match[] = { { .compatible = "wlf,wm8804", }, { } }; MODULE_DEVICE_TABLE(of, wm8804_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id wm8804_acpi_match[] = { + { "1AEC8804", 0 }, /* Wolfson PCI ID + part ID */ + { "10138804", 0 }, /* Cirrus Logic PCI ID + part ID */ + { }, +}; +MODULE_DEVICE_TABLE(acpi, wm8804_acpi_match); +#endif static struct i2c_driver wm8804_i2c_driver = { .driver = { .name = "wm8804", .pm = &wm8804_pm, - .of_match_table = wm8804_of_match, + .of_match_table = of_match_ptr(wm8804_of_match), + .acpi_match_table = ACPI_PTR(wm8804_acpi_match), }, .probe = wm8804_i2c_probe, .remove = wm8804_i2c_remove, -- 2.17.1

3 2

[alsa-devel] Applied "ASoC: Intel: common: add table for HDA-based platforms" to the asoc tree
by Mark Brown 28 Aug '18

28 Aug '18

The patch ASoC: Intel: common: add table for HDA-based platforms has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 8dce1d026da4588382ed8c03e791c7c9b37b22e8 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Date: Wed, 22 Aug 2018 15:24:58 -0500 Subject: [PATCH] ASoC: Intel: common: add table for HDA-based platforms Expose a table containing machine driver information for HDAudio-based platforms handled by ASoC on Intel hardware. We only set constant values that are valid across multiple platforms. The firmware name used by the DSP will be set dynamically for each platform. The table is made of a single entry for now, if we need more complicated set-up where HDAudio is mixed with ACPI-enumerated devices (I2C, SoundWire) then we'd expect the differentiation to be handled through information provided by the BIOS (as done for KBL Chromebooks). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- include/sound/soc-acpi-intel-match.h | 6 +++ sound/soc/intel/common/Makefile | 3 +- .../intel/common/soc-acpi-intel-hda-match.c | 40 +++++++++++++++++++ 3 files changed, 48 insertions(+), 1 deletion(-) create mode 100644 sound/soc/intel/common/soc-acpi-intel-hda-match.c diff --git a/include/sound/soc-acpi-intel-match.h b/include/sound/soc-acpi-intel-match.h index bb1d24b703fb..f48f59e5b7b0 100644 --- a/include/sound/soc-acpi-intel-match.h +++ b/include/sound/soc-acpi-intel-match.h @@ -25,4 +25,10 @@ extern struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[]; extern struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[]; extern struct snd_soc_acpi_mach snd_soc_acpi_intel_cnl_machines[]; +/* + * generic table used for HDA codec-based platforms, possibly with + * additional ACPI-enumerated codecs + */ +extern struct snd_soc_acpi_mach snd_soc_acpi_intel_hda_machines[]; + #endif diff --git a/sound/soc/intel/common/Makefile b/sound/soc/intel/common/Makefile index 915a34cdc8ac..c1f50a079d34 100644 --- a/sound/soc/intel/common/Makefile +++ b/sound/soc/intel/common/Makefile @@ -7,7 +7,8 @@ snd-soc-acpi-intel-match-objs := soc-acpi-intel-byt-match.o soc-acpi-intel-cht-m soc-acpi-intel-hsw-bdw-match.o \ soc-acpi-intel-skl-match.o soc-acpi-intel-kbl-match.o \ soc-acpi-intel-bxt-match.o soc-acpi-intel-glk-match.o \ - soc-acpi-intel-cnl-match.o + soc-acpi-intel-cnl-match.o \ + soc-acpi-intel-hda-match.o obj-$(CONFIG_SND_SOC_INTEL_SST) += snd-soc-sst-dsp.o snd-soc-sst-ipc.o obj-$(CONFIG_SND_SOC_INTEL_SST_ACPI) += snd-soc-sst-acpi.o diff --git a/sound/soc/intel/common/soc-acpi-intel-hda-match.c b/sound/soc/intel/common/soc-acpi-intel-hda-match.c new file mode 100644 index 000000000000..533c1064f84b --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-hda-match.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Intel Corporation. + +/* + * soc-apci-intel-hda-match.c - tables and support for HDA+ACPI enumeration. + * + */ + +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> +#include "../skylake/skl.h" + +static struct skl_machine_pdata hda_pdata = { + .use_tplg_pcm = true, +}; + +struct snd_soc_acpi_mach snd_soc_acpi_intel_hda_machines[] = { + { + /* .id is not used in this file */ + .drv_name = "skl_hda_dsp_generic", + + /* .fw_filename is dynamically set in skylake driver */ + + /* .sof_fw_filename is dynamically set in sof/intel driver */ + + .sof_tplg_filename = "intel/sof-hda-generic.tplg", + + /* + * .machine_quirk and .quirk_data are not used here but + * can be used if we need a more complicated machine driver + * combining HDA+other device (e.g. DMIC). + */ + .pdata = &hda_pdata, + }, + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_hda_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); -- 2.18.0

1 0

[alsa-devel] Applied "ASoC: Intel: Boards: Machine driver for SKL+ w/ HDAudio codecs" to the asoc tree
by Mark Brown 28 Aug '18

28 Aug '18

The patch ASoC: Intel: Boards: Machine driver for SKL+ w/ HDAudio codecs has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 7c33b5f16915a7bc3d3b81a9a041bdc562f71dfb Mon Sep 17 00:00:00 2001 From: Rakesh Ughreja <rakesh.a.ughreja(a)intel.com> Date: Wed, 22 Aug 2018 15:24:59 -0500 Subject: [PATCH] ASoC: Intel: Boards: Machine driver for SKL+ w/ HDAudio codecs Add machine driver for Intel platforms (SKL/KBL/BXT/APL) with HDA and iDisp codecs. This patch adds support for only iDisp (HDMI/DP) codec. In the following patches support for HDA codecs will be added. This should work for other Intel platforms as well e.g. GLK,CNL however this series is not tested on all the platforms. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja(a)intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/intel/boards/Kconfig | 8 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/skl_hda_dsp_common.c | 103 +++++++++++++ sound/soc/intel/boards/skl_hda_dsp_common.h | 38 +++++ sound/soc/intel/boards/skl_hda_dsp_generic.c | 144 +++++++++++++++++++ sound/soc/intel/skylake/skl.h | 2 + 6 files changed, 297 insertions(+) create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.c create mode 100644 sound/soc/intel/boards/skl_hda_dsp_common.h create mode 100644 sound/soc/intel/boards/skl_hda_dsp_generic.c diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index cccda87f4b34..0f0d57859555 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -279,6 +279,14 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH This adds support for ASoC Onboard Codec I2S machine driver. This will create an alsa sound card for DA7219 + MAX98357A I2S audio codec. Say Y if you have such a device. + +config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH + tristate "SKL/KBL/BXT/APL with HDA Codecs" + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC machine driver for Intel platforms + SKL/KBL/BXT/APL with iDisp, HDA audio codecs. + Say Y or m if you have such a device. This is a recommended option. If unsure select "N". config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index 87ef8b4058e5..6e88373cbe35 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -20,6 +20,7 @@ snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o snd-soc-kbl_rt5663_rt5514_max98927-objs := kbl_rt5663_rt5514_max98927.o snd-soc-skl_rt286-objs := skl_rt286.o +snd-soc-skl_hda_dsp-objs := skl_hda_dsp_generic.o skl_hda_dsp_common.o snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o @@ -46,3 +47,4 @@ obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH) += snd-soc-kbl_rt566 obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o +obj-$(CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH) += snd-soc-skl_hda_dsp.o diff --git a/sound/soc/intel/boards/skl_hda_dsp_common.c b/sound/soc/intel/boards/skl_hda_dsp_common.c new file mode 100644 index 000000000000..f9917e0f2ba8 --- /dev/null +++ b/sound/soc/intel/boards/skl_hda_dsp_common.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2015-18 Intel Corporation. + +/* + * Common functions used in different Intel machine drivers + */ +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include "../../codecs/hdac_hdmi.h" +#include "../skylake/skl.h" +#include "skl_hda_dsp_common.h" + +#define NAME_SIZE 32 + +int skl_hda_hdmi_add_pcm(struct snd_soc_card *card, int device) +{ + struct skl_hda_private *ctx = snd_soc_card_get_drvdata(card); + struct skl_hda_hdmi_pcm *pcm; + char dai_name[NAME_SIZE]; + + pcm = devm_kzalloc(card->dev, sizeof(*pcm), GFP_KERNEL); + if (!pcm) + return -ENOMEM; + + snprintf(dai_name, sizeof(dai_name), "intel-hdmi-hifi%d", + ctx->dai_index); + pcm->codec_dai = snd_soc_card_get_codec_dai(card, dai_name); + if (!pcm->codec_dai) + return -EINVAL; + + pcm->device = device; + list_add_tail(&pcm->head, &ctx->hdmi_pcm_list); + + return 0; +} + +/* skl_hda_digital audio interface glue - connects codec <--> CPU */ +struct snd_soc_dai_link skl_hda_be_dai_links[HDA_DSP_MAX_BE_DAI_LINKS] = { + /* Back End DAI links */ + { + .name = "iDisp1", + .id = 1, + .cpu_dai_name = "iDisp1 Pin", + .codec_name = "ehdaudio0D2", + .codec_dai_name = "intel-hdmi-hifi1", + .dpcm_playback = 1, + .no_pcm = 1, + }, + { + .name = "iDisp2", + .id = 2, + .cpu_dai_name = "iDisp2 Pin", + .codec_name = "ehdaudio0D2", + .codec_dai_name = "intel-hdmi-hifi2", + .dpcm_playback = 1, + .no_pcm = 1, + }, + { + .name = "iDisp3", + .id = 3, + .cpu_dai_name = "iDisp3 Pin", + .codec_name = "ehdaudio0D2", + .codec_dai_name = "intel-hdmi-hifi3", + .dpcm_playback = 1, + .no_pcm = 1, + }, +}; + +int skl_hda_hdmi_jack_init(struct snd_soc_card *card) +{ + struct skl_hda_private *ctx = snd_soc_card_get_drvdata(card); + struct snd_soc_component *component = NULL; + struct skl_hda_hdmi_pcm *pcm; + char jack_name[NAME_SIZE]; + int err; + + list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) { + component = pcm->codec_dai->component; + snprintf(jack_name, sizeof(jack_name), + "HDMI/DP, pcm=%d Jack", pcm->device); + err = snd_soc_card_jack_new(card, jack_name, + SND_JACK_AVOUT, &pcm->hdmi_jack, + NULL, 0); + + if (err) + return err; + + err = hdac_hdmi_jack_init(pcm->codec_dai, pcm->device, + &pcm->hdmi_jack); + if (err < 0) + return err; + } + + if (!component) + return -EINVAL; + + return hdac_hdmi_jack_port_init(component, &card->dapm); +} diff --git a/sound/soc/intel/boards/skl_hda_dsp_common.h b/sound/soc/intel/boards/skl_hda_dsp_common.h new file mode 100644 index 000000000000..b6c79696bfba --- /dev/null +++ b/sound/soc/intel/boards/skl_hda_dsp_common.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright(c) 2015-18 Intel Corporation. + */ + +/* + * This file defines data structures used in Machine Driver for Intel + * platforms with HDA Codecs. + */ + +#ifndef __SOUND_SOC_HDA_DSP_COMMON_H +#define __SOUND_SOC_HDA_DSP_COMMON_H +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/jack.h> + +#define HDA_DSP_MAX_BE_DAI_LINKS 3 + +struct skl_hda_hdmi_pcm { + struct list_head head; + struct snd_soc_dai *codec_dai; + struct snd_soc_jack hdmi_jack; + int device; +}; + +struct skl_hda_private { + struct list_head hdmi_pcm_list; + int pcm_count; + int dai_index; + const char *platform_name; +}; + +extern struct snd_soc_dai_link skl_hda_be_dai_links[HDA_DSP_MAX_BE_DAI_LINKS]; +int skl_hda_hdmi_jack_init(struct snd_soc_card *card); +int skl_hda_hdmi_add_pcm(struct snd_soc_card *card, int device); + +#endif /* __SOUND_SOC_HDA_DSP_COMMON_H */ diff --git a/sound/soc/intel/boards/skl_hda_dsp_generic.c b/sound/soc/intel/boards/skl_hda_dsp_generic.c new file mode 100644 index 000000000000..920bc2ce22aa --- /dev/null +++ b/sound/soc/intel/boards/skl_hda_dsp_generic.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2015-18 Intel Corporation. + +/* + * Machine Driver for SKL+ platforms with DSP and iDisp, HDA Codecs + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include "../../codecs/hdac_hdmi.h" +#include "../skylake/skl.h" +#include "skl_hda_dsp_common.h" + +static const struct snd_soc_dapm_route skl_hda_map[] = { + { "hifi3", NULL, "iDisp3 Tx"}, + { "iDisp3 Tx", NULL, "iDisp3_out"}, + { "hifi2", NULL, "iDisp2 Tx"}, + { "iDisp2 Tx", NULL, "iDisp2_out"}, + { "hifi1", NULL, "iDisp1 Tx"}, + { "iDisp1 Tx", NULL, "iDisp1_out"}, +}; + +static int skl_hda_card_late_probe(struct snd_soc_card *card) +{ + return skl_hda_hdmi_jack_init(card); +} + +static int +skl_hda_add_dai_link(struct snd_soc_card *card, struct snd_soc_dai_link *link) +{ + struct skl_hda_private *ctx = snd_soc_card_get_drvdata(card); + int ret = 0; + + dev_dbg(card->dev, "%s: dai link name - %s\n", __func__, link->name); + link->platform_name = ctx->platform_name; + link->nonatomic = 1; + + if (strstr(link->name, "HDMI")) { + ret = skl_hda_hdmi_add_pcm(card, ctx->pcm_count); + + if (ret < 0) + return ret; + + ctx->dai_index++; + } + + ctx->pcm_count++; + return ret; +} + +static struct snd_soc_card hda_soc_card = { + .name = "skl_hda_card", + .owner = THIS_MODULE, + .dai_link = skl_hda_be_dai_links, + .dapm_routes = skl_hda_map, + .add_dai_link = skl_hda_add_dai_link, + .fully_routed = true, + .late_probe = skl_hda_card_late_probe, +}; + +#define IDISP_DAI_COUNT 3 +/* there are two routes per iDisp output */ +#define IDISP_ROUTE_COUNT (IDISP_DAI_COUNT * 2) +#define IDISP_CODEC_MASK 0x4 + +static int skl_hda_fill_card_info(struct skl_machine_pdata *pdata) +{ + struct snd_soc_card *card = &hda_soc_card; + u32 codec_count, codec_mask; + int i, num_links, num_route; + + codec_mask = pdata->codec_mask; + codec_count = hweight_long(codec_mask); + + if (codec_count == 1 && pdata->codec_mask & IDISP_CODEC_MASK) { + num_links = IDISP_DAI_COUNT; + num_route = IDISP_ROUTE_COUNT; + } else { + return -EINVAL; + } + + card->num_links = num_links; + card->num_dapm_routes = num_route; + + for (i = 0; i < num_links; i++) + skl_hda_be_dai_links[i].platform_name = pdata->platform; + + return 0; +} + +static int skl_hda_audio_probe(struct platform_device *pdev) +{ + struct skl_machine_pdata *pdata; + struct skl_hda_private *ctx; + int ret; + + dev_dbg(&pdev->dev, "%s: entry\n", __func__); + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC); + if (!ctx) + return -ENOMEM; + + INIT_LIST_HEAD(&ctx->hdmi_pcm_list); + + pdata = dev_get_drvdata(&pdev->dev); + if (!pdata) + return -EINVAL; + + ret = skl_hda_fill_card_info(pdata); + if (ret < 0) { + dev_err(&pdev->dev, "Unsupported HDAudio/iDisp configuration found\n"); + return ret; + } + + ctx->pcm_count = hda_soc_card.num_links; + ctx->dai_index = 1; /* hdmi codec dai name starts from index 1 */ + ctx->platform_name = pdata->platform; + + hda_soc_card.dev = &pdev->dev; + snd_soc_card_set_drvdata(&hda_soc_card, ctx); + + return devm_snd_soc_register_card(&pdev->dev, &hda_soc_card); +} + +static struct platform_driver skl_hda_audio = { + .probe = skl_hda_audio_probe, + .driver = { + .name = "skl_hda_dsp_generic", + .pm = &snd_soc_pm_ops, + }, +}; + +module_platform_driver(skl_hda_audio) + +/* Module information */ +MODULE_DESCRIPTION("SKL/KBL/BXT/APL HDA Generic Machine driver"); +MODULE_AUTHOR("Rakesh Ughreja <rakesh.a.ughreja(a)intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:skl_hda_dsp_generic"); diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index 78aa8bdcb619..4105a9371b64 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -117,6 +117,8 @@ struct skl_dma_params { struct skl_machine_pdata { u32 dmic_num; bool use_tplg_pcm; /* use dais and dai links from topology */ + const char *platform; + u32 codec_mask; }; struct skl_dsp_ops { -- 2.18.0

1 0