August 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: rt5677: Remove bogus device id from rt5677_of_match
by Matthias Kaehlcke 07 Aug '18

07 Aug '18

The initializer of rt5677_of_match contains a bogus device id (enum type) for the 'type' field (char []). Remove it. Signed-off-by: Matthias Kaehlcke <mka(a)chromium.org> --- sound/soc/codecs/rt5677.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index 8a0181a2db08..7dab53b35cbf 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -5007,7 +5007,7 @@ static const struct regmap_config rt5677_regmap = { }; static const struct of_device_id rt5677_of_match[] = { - { .compatible = "realtek,rt5677", RT5677 }, + { .compatible = "realtek,rt5677", }, { } }; MODULE_DEVICE_TABLE(of, rt5677_of_match); -- 2.18.0.597.ga71716f1ad-goog

2 2

[alsa-devel] [RFC PATCH] ASoC: compress: make BE and FE order inline with dpcm
by Srinivas Kandagatla 07 Aug '18

07 Aug '18

For some reason order of startup/hw_params/prepare are reversed in dynamic compress usecase when compared to dpcm usecase. This is a issue with platforms like QCOM where it expects the BE to be initialized before FE. Interestingly the compress trigger callback order is inline with dpcm. Am not 100% sure why the compress audio case has been reversed. This patch is making the order inline with dpcm. If the reverse ordering is just co-incendental then this change makes sense and will avoid inventing some new mechanism to cope with ordering. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> --- Hi All, This patch is making the order of startup/hw_params/prepare in dynamic compress usecase inline with dpcm case. As I could not figure out the reason why this was done in reverse order. So am sending this patch to get some insights of this. It would be great If someone from Intel can test this patch to verify if the new ordering is okay. Without this patch, we have to come up with a new mechanism to enforce ordering on QCom platform to get compress offload working. Thanks, Srini sound/soc/soc-compress.c | 96 +++++++++++++++++++++++------------------------- 1 file changed, 46 insertions(+), 50 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index b9e1673fea51..409d082e80d1 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -140,6 +140,30 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) stream = SNDRV_PCM_STREAM_CAPTURE; mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME); + fe->dpcm[stream].runtime = fe_substream->runtime; + + ret = dpcm_path_get(fe, stream, &list); + if (ret < 0) + goto be_err; + else if (ret == 0) + dev_dbg(fe->dev, "Compress ASoC: %s no valid %s route\n", + fe->dai_link->name, stream ? "capture" : "playback"); + /* calculate valid and active FE <-> BE dpcms */ + dpcm_process_paths(fe, stream, &list, 1); + fe->dpcm[stream].runtime = fe_substream->runtime; + + fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; + + ret = dpcm_be_dai_startup(fe, stream); + if (ret < 0) { + /* clean up all links */ + list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) + dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE; + + dpcm_be_disconnect(fe, stream); + fe->dpcm[stream].runtime = NULL; + goto out; + } if (cpu_dai->driver->cops && cpu_dai->driver->cops->startup) { ret = cpu_dai->driver->cops->startup(cstream, cpu_dai); @@ -153,7 +177,7 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) ret = soc_compr_components_open(cstream, &component); if (ret < 0) - goto machine_err; + goto open_err; if (fe->dai_link->compr_ops && fe->dai_link->compr_ops->startup) { ret = fe->dai_link->compr_ops->startup(cstream); @@ -164,31 +188,6 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) } } - fe->dpcm[stream].runtime = fe_substream->runtime; - - ret = dpcm_path_get(fe, stream, &list); - if (ret < 0) - goto fe_err; - else if (ret == 0) - dev_dbg(fe->dev, "Compress ASoC: %s no valid %s route\n", - fe->dai_link->name, stream ? "capture" : "playback"); - - /* calculate valid and active FE <-> BE dpcms */ - dpcm_process_paths(fe, stream, &list, 1); - - fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; - - ret = dpcm_be_dai_startup(fe, stream); - if (ret < 0) { - /* clean up all links */ - list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) - dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE; - - dpcm_be_disconnect(fe, stream); - fe->dpcm[stream].runtime = NULL; - goto path_err; - } - dpcm_clear_pending_state(fe, stream); dpcm_path_put(&list); @@ -201,17 +200,14 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) return 0; -path_err: - dpcm_path_put(&list); -fe_err: - if (fe->dai_link->compr_ops && fe->dai_link->compr_ops->shutdown) - fe->dai_link->compr_ops->shutdown(cstream); machine_err: soc_compr_components_free(cstream, component); - +open_err: if (cpu_dai->driver->cops && cpu_dai->driver->cops->shutdown) cpu_dai->driver->cops->shutdown(cstream, cpu_dai); out: + dpcm_path_put(&list); +be_err: fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO; mutex_unlock(&fe->card->mutex); return ret; @@ -551,6 +547,24 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream, mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME); + /* + * Create an empty hw_params for the BE as the machine driver must + * fix this up to match DSP decoder and ASRC configuration. + * I.e. machine driver fixup for compressed BE is mandatory. + */ + memset(&fe->dpcm[fe_substream->stream].hw_params, 0, + sizeof(struct snd_pcm_hw_params)); + + fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; + + ret = dpcm_be_dai_hw_params(fe, stream); + if (ret < 0) + goto out; + + ret = dpcm_be_dai_prepare(fe, stream); + if (ret < 0) + goto out; + if (cpu_dai->driver->cops && cpu_dai->driver->cops->set_params) { ret = cpu_dai->driver->cops->set_params(cstream, params, cpu_dai); if (ret < 0) @@ -577,24 +591,6 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream, goto out; } - /* - * Create an empty hw_params for the BE as the machine driver must - * fix this up to match DSP decoder and ASRC configuration. - * I.e. machine driver fixup for compressed BE is mandatory. - */ - memset(&fe->dpcm[fe_substream->stream].hw_params, 0, - sizeof(struct snd_pcm_hw_params)); - - fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; - - ret = dpcm_be_dai_hw_params(fe, stream); - if (ret < 0) - goto out; - - ret = dpcm_be_dai_prepare(fe, stream); - if (ret < 0) - goto out; - dpcm_dapm_stream_event(fe, stream, SND_SOC_DAPM_STREAM_START); fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PREPARE; -- 2.16.2

2 1

[alsa-devel] [PATCH] soundwire: intel: Remove duplicate assignment
by Vinod Koul 07 Aug '18

07 Aug '18

From: Shreyas NC <shreyas.nc(a)intel.com> Signed-off-by: Shreyas NC <shreyas.nc(a)intel.com> Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- drivers/soundwire/intel.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index da7f91f1a588..c5ee97ee7886 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -845,9 +845,6 @@ static int intel_probe(struct platform_device *pdev) sdw_intel_ops.read_prop = intel_prop_read; sdw->cdns.bus.ops = &sdw_intel_ops; - sdw_intel_ops.read_prop = intel_prop_read; - sdw->cdns.bus.ops = &sdw_intel_ops; - platform_set_drvdata(pdev, sdw); ret = sdw_add_bus_master(&sdw->cdns.bus); -- 2.14.4

2 1

[alsa-devel] [PATCH] soundwire: intel: Fix uninitialized adev deref
by Vinod Koul 07 Aug '18

07 Aug '18

In case of error, we can dereference uninitialized 'adev' drivers/soundwire/intel_init.c:154 sdw_intel_acpi_cb() error: uninitialized symbol 'adev'. Fix that by not using adev for warn print and make it pr_err. Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Vinod Koul <vkoul(a)kernel.org> --- drivers/soundwire/intel_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c index d1ea6b4d0ad3..5c8a20d99878 100644 --- a/drivers/soundwire/intel_init.c +++ b/drivers/soundwire/intel_init.c @@ -151,7 +151,7 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, struct acpi_device *adev; if (acpi_bus_get_device(handle, &adev)) { - dev_err(&adev->dev, "Couldn't find ACPI handle\n"); + pr_err("%s: Couldn't find ACPI handle\n", __func__); return AE_NOT_FOUND; } -- 2.14.4

2 1

[alsa-devel] [bug report] slimbus: ngd: Add qcom SLIMBus NGD driver
by Dan Carpenter 07 Aug '18

07 Aug '18

Hello Srinivas Kandagatla, This is a semi-automatic email about new static checker warnings. The patch 917809e2280b: "slimbus: ngd: Add qcom SLIMBus NGD driver" from Jun 19, 2018, leads to the following Smatch complaint: drivers/slimbus/qcom-ngd-ctrl.c:867 qcom_slim_ngd_xfer_msg() warn: variable dereferenced before check 'txn->msg' (see line 791) drivers/slimbus/qcom-ngd-ctrl.c 790 791 if (txn->msg->num_bytes > SLIM_MSGQ_BUF_LEN || ^^^^^^^^^ Dereference 792 txn->rl > SLIM_MSGQ_BUF_LEN) { 793 dev_err(ctrl->dev, "msg exeeds HW limit\n"); 794 return -EINVAL; 795 } 796 797 pbuf = qcom_slim_ngd_tx_msg_get(ctrl, txn->rl, &tx_sent); 798 if (!pbuf) { 799 dev_err(ctrl->dev, "Message buffer unavailable\n"); 800 return -ENOMEM; 801 } 802 803 if (txn->mt == SLIM_MSG_MT_CORE && 804 (txn->mc == SLIM_MSG_MC_CONNECT_SOURCE || 805 txn->mc == SLIM_MSG_MC_CONNECT_SINK || 806 txn->mc == SLIM_MSG_MC_DISCONNECT_PORT)) { 807 txn->mt = SLIM_MSG_MT_DEST_REFERRED_USER; 808 switch (txn->mc) { 809 case SLIM_MSG_MC_CONNECT_SOURCE: 810 txn->mc = SLIM_USR_MC_CONNECT_SRC; 811 break; 812 case SLIM_MSG_MC_CONNECT_SINK: 813 txn->mc = SLIM_USR_MC_CONNECT_SINK; 814 break; 815 case SLIM_MSG_MC_DISCONNECT_PORT: 816 txn->mc = SLIM_USR_MC_DISCONNECT_PORT; 817 break; 818 default: 819 return -EINVAL; 820 } 821 822 usr_msg = true; 823 i = 0; 824 wbuf[i++] = txn->la; 825 la = SLIM_LA_MGR; 826 wbuf[i++] = txn->msg->wbuf[0]; 827 if (txn->mc != SLIM_USR_MC_DISCONNECT_PORT) 828 wbuf[i++] = txn->msg->wbuf[1]; 829 830 txn->comp = &done; 831 ret = slim_alloc_txn_tid(sctrl, txn); 832 if (ret) { 833 dev_err(ctrl->dev, "Unable to allocate TID\n"); 834 return ret; 835 } 836 837 wbuf[i++] = txn->tid; 838 839 txn->msg->num_bytes = i; 840 txn->msg->wbuf = wbuf; 841 txn->msg->rbuf = rbuf; 842 txn->rl = txn->msg->num_bytes + 4; 843 } 844 845 /* HW expects length field to be excluded */ 846 txn->rl--; 847 puc = (u8 *)pbuf; 848 *pbuf = 0; 849 if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) { 850 *pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, txn->mc, 0, 851 la); 852 puc += 3; 853 } else { 854 *pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, txn->mc, 1, 855 la); 856 puc += 2; 857 } 858 859 if (slim_tid_txn(txn->mt, txn->mc)) 860 *(puc++) = txn->tid; 861 862 if (slim_ec_txn(txn->mt, txn->mc)) { 863 *(puc++) = (txn->ec & 0xFF); 864 *(puc++) = (txn->ec >> 8) & 0xFF; 865 } 866 867 if (txn->msg && txn->msg->wbuf) ^^^^^^^^ This check is too late. 868 memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes); 869 regards, dan carpenter

2 1

[alsa-devel] [PATCH v4 23/26] devicetree: fix a series of wrong file references
by Mauro Carvalho Chehab 07 Aug '18

07 Aug '18

As files got renamed, their references broke. Manually fix a series of broken refs at the DT bindings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung(a)kernel.org> --- .../devicetree/bindings/input/rmi4/rmi_2d_sensor.txt | 2 +- Documentation/devicetree/bindings/mfd/sun6i-prcm.txt | 2 +- .../devicetree/bindings/pci/hisilicon-pcie.txt | 2 +- Documentation/devicetree/bindings/pci/kirin-pcie.txt | 2 +- .../devicetree/bindings/pci/pci-keystone.txt | 4 ++-- .../devicetree/bindings/sound/st,stm32-i2s.txt | 2 +- .../devicetree/bindings/sound/st,stm32-sai.txt | 2 +- MAINTAINERS | 12 ++++++------ 8 files changed, 14 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt index f2c30c8b725d..9afffbdf6e28 100644 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt @@ -12,7 +12,7 @@ Additional documentation for F11 can be found at: http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Inter… Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touch +Description in Documentation/devicetree/bindings/input/touchscreen - touchscreen-inverted-x - touchscreen-inverted-y - touchscreen-swapped-x-y diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 4d21ffdb0fc1..daa091c2e67b 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -8,7 +8,7 @@ Required properties: - reg: The PRCM registers range The prcm node may contain several subdevices definitions: - - see Documentation/devicetree/clk/sunxi.txt for clock devices + - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset controller devices diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 7bf9df047a1e..0dcb87d6554f 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt index 6e217c63123d..6bbe43818ad5 100644 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Kirin SoCs PCIe host DT description Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 7e05487544ed..3d4a209b0fd0 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -3,9 +3,9 @@ TI Keystone PCIe interface Keystone PCI host Controller is based on the Synopsys DesignWare PCI hardware version 3.65. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt +Documentation/devicetree/bindings/pci/designware-pcie.txt -Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt +Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt for the details of DesignWare DT bindings. Additional properties are described here as well as properties that are not applicable. diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt index 4bda52042402..58c341300552 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt @@ -18,7 +18,7 @@ Required properties: See Documentation/devicetree/bindings/dma/stm32-dma.txt. - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt Optional properties: - resets: Reference to a reset controller asserting the reset controller diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f301cdf0b7e6..3a3fc506e43a 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -37,7 +37,7 @@ SAI subnodes required properties: "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt SAI subnodes Optional properties: - st,sync: specify synchronization mode. diff --git a/MAINTAINERS b/MAINTAINERS index 783ce44b3e7a..fd3fc63f2759 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6966,7 +6966,7 @@ IIO MULTIPLEXER M: Peter Rosin <peda(a)axentia.se> L: linux-iio(a)vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt +F: Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt F: drivers/iio/multiplexer/iio-mux.c IIO SUBSYSTEM AND DRIVERS @@ -9696,7 +9696,7 @@ MXSFB DRM DRIVER M: Marek Vasut <marex(a)denx.de> S: Supported F: drivers/gpu/drm/mxsfb/ -F: Documentation/devicetree/bindings/display/mxsfb-drm.txt +F: Documentation/devicetree/bindings/display/mxsfb.txt MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) M: Chris Lee <christopher.lee(a)cspi.com> @@ -10885,7 +10885,7 @@ M: Will Deacon <will.deacon(a)arm.com> L: linux-pci(a)vger.kernel.org L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/pci/controller-generic-pci.txt +F: Documentation/devicetree/bindings/pci/host-generic-pci.txt F: drivers/pci/controller/pci-host-common.c F: drivers/pci/controller/pci-host-generic.c @@ -11066,7 +11066,7 @@ M: Xiaowei Song <songxiaowei(a)hisilicon.com> M: Binghui Wang <wangbinghui(a)hisilicon.com> L: linux-pci(a)vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/pci/pcie-kirin.txt +F: Documentation/devicetree/bindings/pci/kirin-pcie.txt F: drivers/pci/controller/dwc/pcie-kirin.c PCIE DRIVER FOR HISILICON STB @@ -12457,7 +12457,7 @@ L: linux-crypto(a)vger.kernel.org L: linux-samsung-soc(a)vger.kernel.org S: Maintained F: drivers/crypto/exynos-rng.c -F: Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt +F: Documentation/devicetree/bindings/rng/samsung,exynos4-rng.txt SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER M: Łukasz Stelmach <l.stelmach(a)samsung.com> @@ -13571,7 +13571,7 @@ F: drivers/*/stm32-*timer* F: drivers/pwm/pwm-stm32* F: include/linux/*/stm32-*tim* F: Documentation/ABI/testing/*timer-stm32 -F: Documentation/devicetree/bindings/*/stm32-*timer +F: Documentation/devicetree/bindings/*/stm32-*timer* F: Documentation/devicetree/bindings/pwm/pwm-stm32* STMMAC ETHERNET DRIVER -- 2.17.1

4 3

[alsa-devel] [PATCH v8 00/10] soundwire: Add multi link support
by Shreyas NC 07 Aug '18

07 Aug '18

Currently, in the SoundWire subsystem, the concept of stream is limited to a Master and one or more Slaves(Codecs). This series aims to add support for multiple Master(s) sharing the same reference clock and synchronized in the hardware. This patch series adds: - Fix to avoid duplicate stream state assignment - Avoid incorrect stream release after configuring Master - Fix to avoid bus lock acquired twice - Helpers to lock bus instances part of the stream - Boiler plate conversion of code to support a list of Master runtime - Support multi link bank switch to support synchronization between multiple masters - Add Intel platform ops for pre/post bank switch Additionally, as suggested by Vinod, the generic fixes are arranged at the top of the series followed by the Documentation patch for multi link support and then the multi link patches. changes in v8: - Check both m_rt_count and bus->multi_link flag for clean up after single instance bankswitch as suggested by Pierre. changes in v7: - Fix the git bisect issue pointed by Pierre. Now, the initialization of the m_rt_count and its modification/usage is split into 2 patches. While the declaration and initialization is in one patch, modification of the refcount and usage is in the multilink bankswitch patch. - Re-arrange the patches as suggested by Vinod Sanyog Kale (3): soundwire: Fix acquiring bus lock twice during master release Documentation: soundwire: Add documentation for multi link soundwire: Add support to lock across bus instances Shreyas NC (6): soundwire: Fix duplicate stream state assignment soundwire: Fix incorrect exit after configuring stream soundwire: Initialize completion for defer messages soundwire: keep track of Masters in a stream soundwire: Add support for multi link bank switch soundwire: intel: Add pre/post bank switch ops Vinod Koul (1): soundwire: Handle multiple master instances in a stream Documentation/driver-api/soundwire/stream.rst | 28 ++ drivers/soundwire/bus.c | 6 + drivers/soundwire/bus.h | 4 + drivers/soundwire/intel.c | 65 ++++ drivers/soundwire/stream.c | 511 +++++++++++++++++++------- include/linux/soundwire/sdw.h | 12 +- 6 files changed, 489 insertions(+), 137 deletions(-) -- 2.7.4

3 12

[alsa-devel] [PATCH 0/9] ALSA: remove redundant variables
by Colin King 06 Aug '18

06 Aug '18

From: Colin Ian King <colin.king(a)canonical.com> Clean up code by removing redundant variables that were detected by clang Colin Ian King (9): ALSA: asihpi: remove redundant variable max_streams ALSA: cs5535audio: remove redundant pointer 'dma' ALSA: emu10k1: remove redundant variable attn ALSA: ens137x: remove redundant array pcm_devs ALSA: sonicvibes: remove redundant pointer 'dir' ASoC: nau8540: remove redundant variable osrate ASoC: stm32: remove redundant pointers 'priv' and 'rtd' ALSA: usb-audio: remove redundant pointer 'urb' ALSA: intel_hdmi: remove redundant variable cfg_val sound/pci/asihpi/hpi6205.c | 5 ----- sound/pci/cs5535audio/cs5535audio.c | 7 +------ sound/pci/emu10k1/emupcm.c | 3 +-- sound/pci/ens1370.c | 3 +-- sound/pci/sonicvibes.c | 2 -- sound/soc/codecs/nau8540.c | 3 --- sound/soc/stm/stm32_adfsdm.c | 8 +------- sound/usb/endpoint.c | 2 -- sound/x86/intel_hdmi_audio.c | 2 -- 9 files changed, 4 insertions(+), 31 deletions(-) -- 2.17.1

4 22

[alsa-devel] Applied "ASoC: AMD: Make ACP->SYSMEM DMA non circular" to the asoc tree
by Mark Brown 06 Aug '18

06 Aug '18

The patch ASoC: AMD: Make ACP->SYSMEM DMA non circular has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From bbdb7012b0736cda0b9b00a2949e9207cf2f892f Mon Sep 17 00:00:00 2001 From: Akshu Agrawal <akshu.agrawal(a)amd.com> Date: Mon, 6 Aug 2018 12:57:14 +0530 Subject: [PATCH] ASoC: AMD: Make ACP->SYSMEM DMA non circular In capture case we don't want ACP to SYSMEM dma to be circular. This is because if an in place DSP filter is applied to captured output then circular DMA can overwrite the filter value with stale data. Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/amd/acp-pcm-dma.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 94bcf69008df..816abd65a6ed 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -400,7 +400,7 @@ static void acp_dma_cap_channel_disable(void __iomem *acp_mmio, } /* Start a given DMA channel transfer */ -static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) +static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num, bool is_circular) { u32 dma_ctrl; @@ -429,8 +429,11 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) break; } - /* circular for both DMA channel */ - dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK; + /* enable for ACP to SRAM DMA channel */ + if (is_circular == true) + dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK; + else + dma_ctrl &= ~ACP_DMA_CNTL_0__Circular_DMA_En_MASK; acp_reg_write(dma_ctrl, acp_mmio, mmACP_DMA_CNTL_0 + ch_num); } @@ -674,6 +677,7 @@ static int acp_deinit(void __iomem *acp_mmio) /* ACP DMA irq handler routine for playback, capture usecases */ static irqreturn_t dma_irq_handler(int irq, void *arg) { + u16 dscr_idx; u32 intr_flag, ext_intr_status; struct audio_drv_data *irq_data; void __iomem *acp_mmio; @@ -705,6 +709,15 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) { valid_irq = true; + if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_14) == + CAPTURE_START_DMA_DESCR_CH15) + dscr_idx = CAPTURE_END_DMA_DESCR_CH14; + else + dscr_idx = CAPTURE_START_DMA_DESCR_CH14; + config_acp_dma_channel(acp_mmio, ACP_TO_SYSRAM_CH_NUM, dscr_idx, + 1, 0); + acp_dma_start(acp_mmio, ACP_TO_SYSRAM_CH_NUM, false); + snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream); acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); @@ -712,6 +725,17 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) { valid_irq = true; + if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_10) == + CAPTURE_START_DMA_DESCR_CH11) + dscr_idx = CAPTURE_END_DMA_DESCR_CH10; + else + dscr_idx = CAPTURE_START_DMA_DESCR_CH10; + config_acp_dma_channel(acp_mmio, + ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM, + dscr_idx, 1, 0); + acp_dma_start(acp_mmio, ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM, + false); + snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream); acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16, @@ -1053,9 +1077,11 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) acp_dma_cap_channel_enable(rtd->acp_mmio, CAP_CHANNEL1); } + acp_dma_start(rtd->acp_mmio, rtd->ch1, true); + } else { + acp_dma_start(rtd->acp_mmio, rtd->ch1, true); + acp_dma_start(rtd->acp_mmio, rtd->ch2, true); } - acp_dma_start(rtd->acp_mmio, rtd->ch1); - acp_dma_start(rtd->acp_mmio, rtd->ch2); ret = 0; break; case SNDRV_PCM_TRIGGER_STOP: -- 2.18.0

1 0

[alsa-devel] [PATCH 1/3] ASoC: AMD: Make ACP->SYSMEM DMA non circular
by Akshu Agrawal 06 Aug '18

06 Aug '18

In capture case we don't want ACP to SYSMEM dma to be circular. This is because if an in place DSP filter is applied to captured output then circular DMA can overwrite the filter value with stale data. Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> --- sound/soc/amd/acp-pcm-dma.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 94bcf69..816abd6 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -400,7 +400,7 @@ static void acp_dma_cap_channel_disable(void __iomem *acp_mmio, } /* Start a given DMA channel transfer */ -static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) +static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num, bool is_circular) { u32 dma_ctrl; @@ -429,8 +429,11 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) break; } - /* circular for both DMA channel */ - dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK; + /* enable for ACP to SRAM DMA channel */ + if (is_circular == true) + dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK; + else + dma_ctrl &= ~ACP_DMA_CNTL_0__Circular_DMA_En_MASK; acp_reg_write(dma_ctrl, acp_mmio, mmACP_DMA_CNTL_0 + ch_num); } @@ -674,6 +677,7 @@ static int acp_deinit(void __iomem *acp_mmio) /* ACP DMA irq handler routine for playback, capture usecases */ static irqreturn_t dma_irq_handler(int irq, void *arg) { + u16 dscr_idx; u32 intr_flag, ext_intr_status; struct audio_drv_data *irq_data; void __iomem *acp_mmio; @@ -705,6 +709,15 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) { valid_irq = true; + if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_14) == + CAPTURE_START_DMA_DESCR_CH15) + dscr_idx = CAPTURE_END_DMA_DESCR_CH14; + else + dscr_idx = CAPTURE_START_DMA_DESCR_CH14; + config_acp_dma_channel(acp_mmio, ACP_TO_SYSRAM_CH_NUM, dscr_idx, + 1, 0); + acp_dma_start(acp_mmio, ACP_TO_SYSRAM_CH_NUM, false); + snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream); acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); @@ -712,6 +725,17 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) { valid_irq = true; + if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_10) == + CAPTURE_START_DMA_DESCR_CH11) + dscr_idx = CAPTURE_END_DMA_DESCR_CH10; + else + dscr_idx = CAPTURE_START_DMA_DESCR_CH10; + config_acp_dma_channel(acp_mmio, + ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM, + dscr_idx, 1, 0); + acp_dma_start(acp_mmio, ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM, + false); + snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream); acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16, @@ -1053,9 +1077,11 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) acp_dma_cap_channel_enable(rtd->acp_mmio, CAP_CHANNEL1); } + acp_dma_start(rtd->acp_mmio, rtd->ch1, true); + } else { + acp_dma_start(rtd->acp_mmio, rtd->ch1, true); + acp_dma_start(rtd->acp_mmio, rtd->ch2, true); } - acp_dma_start(rtd->acp_mmio, rtd->ch1); - acp_dma_start(rtd->acp_mmio, rtd->ch2); ret = 0; break; case SNDRV_PCM_TRIGGER_STOP: -- 1.9.1

2 4