February 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 0/2] ASoC: stm32: spdifrx: change dai name
by Olivier Moysan 12 Feb '18

12 Feb '18

This patchset changes spdifrx dai name and fixes a typo issue. Olivier Moysan (2): ASoC: stm32: spdifrx: fix typo in function name. ASoC: stm32: spdifrx: Use default dai name sound/soc/stm/stm32_spdifrx.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) -- 1.9.1

2 4

[alsa-devel] [PATCH] ALSA: usb: add more device quirks for USB DSD devices
by Daniel Mack 12 Feb '18

12 Feb '18

Add some more devices that need quirks to handle DSD modes correctly. Signed-off-by: Daniel Mack <daniel(a)zonque.org> Reported-and-tested-by: Thomas Gresens <tgresens(a)gmail.com> --- sound/usb/quirks.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index a66ef5777887..ea8f3de92fa4 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1363,8 +1363,11 @@ u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, return SNDRV_PCM_FMTBIT_DSD_U32_BE; break; - /* Amanero Combo384 USB interface with native DSD support */ - case USB_ID(0x16d0, 0x071a): + /* Amanero Combo384 USB based DACs with native DSD support */ + case USB_ID(0x16d0, 0x071a): /* Amanero - Combo384 */ + case USB_ID(0x2ab6, 0x0004): /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */ + case USB_ID(0x2ab6, 0x0005): /* T+A USB HD Audio 1 */ + case USB_ID(0x2ab6, 0x0006): /* T+A USB HD Audio 2 */ if (fp->altsetting == 2) { switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) { case 0x199: -- 2.14.3

2 1

Re: [alsa-devel] [PATCH] ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204
by Takashi Iwai 12 Feb '18

12 Feb '18

On Sat, 03 Feb 2018 15:42:40 +0100, Lassi Ylikojola wrote: > > Add quirk to ensure a sync endpoint is properly configured. > This patch is a fix for same symptoms on Behringer UFX1204 as patch > from Albertto Aquirre on Dec 8 2016 for Axe-Fx II. > > Signed-off-by: Lassi Ylikojola <lassi.ylikojola(a)gmail.com> The patch doesn't seem applied cleanly to the latest tree. Could you check it and repost with the proper patch for the latest Linus tree? thanks, Takashi

2 2

Re: [alsa-devel] [PATCH] ALSA: ac97: kconfig: Remove select of undefined symbol AC97
by Takashi Iwai 12 Feb '18

12 Feb '18

On Fri, 09 Feb 2018 00:20:21 +0100, Ulf Magnusson wrote: > > On Fri, Feb 09, 2018 at 12:15:36AM +0100, Ulf Magnusson wrote: > > The AC97_BUS_NEW Kconfig symbol selects the globally undefined symbol > > AC97. > > > > Robert Jarzmik confirmed in https://lkml.org/lkml/2018/2/7/96 that the > > select was put in by mistake and can be safely removed, with no other > > changes required. Remove it. > > > > Signed-off-by: Ulf Magnusson <ulfalizer(a)gmail.com> > > --- > > sound/ac97/Kconfig | 1 - > > 1 file changed, 1 deletion(-) > > > > diff --git a/sound/ac97/Kconfig b/sound/ac97/Kconfig > > index f8a64e15e5bf..baa5f8ef89d2 100644 > > --- a/sound/ac97/Kconfig > > +++ b/sound/ac97/Kconfig > > @@ -5,7 +5,6 @@ > > > > config AC97_BUS_NEW > > tristate > > - select AC97 > > help > > This is the new AC97 bus type, successor of AC97_BUS. The ported > > drivers which benefit from the AC97 automatic probing should "select" > > -- > > 2.14.1 > > > > I didn't have a particular tree in mind for this patchset by the way. > Feel free to take the patch in wherever it makes sense. Applied now, thanks. Takashi

1 0

[alsa-devel] arecord read error, input/output error in embedded linux project
by Christopher. Sierra Melendez 12 Feb '18

12 Feb '18

Hello, Did this issue solved? I have same problem… Enviado desde Correo<https://go.microsoft.com/fwlink/?LinkId=550986> para Windows 10

1 0

[alsa-devel] [PATCH RESEND] sound: omap-twl4030: do not complain on -EPROBE_DEFER when initializing
by Ladislav Michl 11 Feb '18

11 Feb '18

Don't complain on -EPROBE_DEFER when when initializing, the driver probe will be retried later. Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> --- Note: Just a resend of patch from 9 Nov 2016 as there were no reply by then. sound/soc/omap/omap-twl4030.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/omap-twl4030.c b/sound/soc/omap/omap-twl4030.c index cccc316743fa..7c1f71884768 100644 --- a/sound/soc/omap/omap-twl4030.c +++ b/sound/soc/omap/omap-twl4030.c @@ -322,8 +322,10 @@ static int omap_twl4030_probe(struct platform_device *pdev) snd_soc_card_set_drvdata(card, priv); ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) { - dev_err(&pdev->dev, "devm_snd_soc_register_card() failed: %d\n", - ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "devm_snd_soc_register_card() failed: %d\n", + ret); return ret; } -- 2.15.1

2 1

[alsa-devel] Fixing the CA0132 driver for Sound Blaster Z
by Connor McAdams 10 Feb '18

10 Feb '18

Hi, first time here and first time working on any sort of Kernel driver, so I hope I'm doing things right by asking my question through this list. I have managed to get audio working for the Creative Sound Blaster Z by reverse engineering the driver and firmware from Windows. I created a program to capture the HDA verbs as they happen in Windows through QEMU using vfio pci passthrough. Now, here's where I'm kind of stumped. I created a program to send the commands that route the audio to it's output on the card. If I run these commands after the driver has already loaded in Linux, it works fine and I get audio. However, if I run these commands inside of the driver, there is no audio. There is an 8051 cpu onboard, and I can dump the contents of its memory through HDA-verbs. I compared dumps of the 8051 while audio is working with the script to dumps when the audio is broken from putting the commands inside of the driver. Just about everything is the same, except for a region I have figured out has to do with the streams. Each audio stream seems to have an ID, and for some reason, if the commands are run inside of the driver, it seems like the stream ID's get messed with. My current theory is that the streams are assigned in order of streams started. So, after my command to start audio, it expects the next stream to be the output audio stream. It also seems like compared to Windows, a lot more stream commands are used. Maybe extra streams are being initiated that are unused, and are interfering with the card. So, my question is, how would I go about starting a stream, maybe like a dummy stream, so it is assigned properly? Are there any examples of this? If someone could point me to where streams are even initiated it would be helpful. My next question is the legality of distributing the firmware. I was able to pull the Sound Blaster Z's firmware from the Windows driver file. Since that is a publicly available file, is it legal to redistribute? I have no experience with this kind of thing. Maybe someone here has someone within Creative I could ask or something. Anyways, like I said, this is my first time doing anything like this. Please correct me if I've done anything wrong, and let me know if anyone needs to see my current driver. Thanks, Connor M.

1 0

[alsa-devel] [PATCH] ASoC: use DEFINE_SHOW_ATTRIBUTE() to decrease code duplication
by Donglin Peng 09 Feb '18

09 Feb '18

There is some duplicate code in soc-core.c,and the kernel provides DEFINE_SHOW_ATTRIBUTE() helper macro to decrease it in seq_file.h. Signed-off-by: Peng Donglin <dolinux.peng(a)gmail.com> --- sound/soc/soc-core.c | 51 +++++++++------------------------------------------ 1 file changed, 9 insertions(+), 42 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 96c44f6576c9..cb52d1e8e0b9 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -349,33 +349,22 @@ static void soc_init_codec_debugfs(struct snd_soc_component *component) "ASoC: Failed to create codec register debugfs file\n"); } -static int codec_list_seq_show(struct seq_file *m, void *v) +static int codec_list_show(struct seq_file *s, void *v) { struct snd_soc_codec *codec; mutex_lock(&client_mutex); list_for_each_entry(codec, &codec_list, list) - seq_printf(m, "%s\n", codec->component.name); + seq_printf(s, "%s\n", codec->component.name); mutex_unlock(&client_mutex); return 0; } +DEFINE_SHOW_ATTRIBUTE(codec_list); -static int codec_list_seq_open(struct inode *inode, struct file *file) -{ - return single_open(file, codec_list_seq_show, NULL); -} - -static const struct file_operations codec_list_fops = { - .open = codec_list_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int dai_list_seq_show(struct seq_file *m, void *v) +static int dai_list_show(struct seq_file *s, void *v) { struct snd_soc_component *component; struct snd_soc_dai *dai; @@ -384,50 +373,28 @@ static int dai_list_seq_show(struct seq_file *m, void *v) list_for_each_entry(component, &component_list, list) list_for_each_entry(dai, &component->dai_list, list) - seq_printf(m, "%s\n", dai->name); + seq_printf(s, "%s\n", dai->name); mutex_unlock(&client_mutex); return 0; } +DEFINE_SHOW_ATTRIBUTE(dai_list); -static int dai_list_seq_open(struct inode *inode, struct file *file) -{ - return single_open(file, dai_list_seq_show, NULL); -} - -static const struct file_operations dai_list_fops = { - .open = dai_list_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int platform_list_seq_show(struct seq_file *m, void *v) +static int platform_list_show(struct seq_file *s, void *v) { struct snd_soc_platform *platform; mutex_lock(&client_mutex); list_for_each_entry(platform, &platform_list, list) - seq_printf(m, "%s\n", platform->component.name); + seq_printf(s, "%s\n", platform->component.name); mutex_unlock(&client_mutex); return 0; } - -static int platform_list_seq_open(struct inode *inode, struct file *file) -{ - return single_open(file, platform_list_seq_show, NULL); -} - -static const struct file_operations platform_list_fops = { - .open = platform_list_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(platform_list); static void soc_init_card_debugfs(struct snd_soc_card *card) { -- 2.16.1

2 6

[alsa-devel] [PATCH] ASoC: use DEFINE_SHOW_ATTRIBUTE() to decrease code duplication
by Peng Donglin 09 Feb '18

09 Feb '18

There is some duplicate code in soc-core.c,and the kernel provides DEFINE_SHOW_ATTRIBUTE() helper macro to decrease it in seq_file.h. Signed-off-by: Peng Donglin <dolinux.peng(a)gmail.com> --- sound/soc/soc-core.c | 51 +++++++++------------------------------------------ 1 file changed, 9 insertions(+), 42 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 96c44f6576c9..cb52d1e8e0b9 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -349,33 +349,22 @@ static void soc_init_codec_debugfs(struct snd_soc_component *component) "ASoC: Failed to create codec register debugfs file\n"); } -static int codec_list_seq_show(struct seq_file *m, void *v) +static int codec_list_show(struct seq_file *s, void *v) { struct snd_soc_codec *codec; mutex_lock(&client_mutex); list_for_each_entry(codec, &codec_list, list) - seq_printf(m, "%s\n", codec->component.name); + seq_printf(s, "%s\n", codec->component.name); mutex_unlock(&client_mutex); return 0; } +DEFINE_SHOW_ATTRIBUTE(codec_list); -static int codec_list_seq_open(struct inode *inode, struct file *file) -{ - return single_open(file, codec_list_seq_show, NULL); -} - -static const struct file_operations codec_list_fops = { - .open = codec_list_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int dai_list_seq_show(struct seq_file *m, void *v) +static int dai_list_show(struct seq_file *s, void *v) { struct snd_soc_component *component; struct snd_soc_dai *dai; @@ -384,50 +373,28 @@ static int dai_list_seq_show(struct seq_file *m, void *v) list_for_each_entry(component, &component_list, list) list_for_each_entry(dai, &component->dai_list, list) - seq_printf(m, "%s\n", dai->name); + seq_printf(s, "%s\n", dai->name); mutex_unlock(&client_mutex); return 0; } +DEFINE_SHOW_ATTRIBUTE(dai_list); -static int dai_list_seq_open(struct inode *inode, struct file *file) -{ - return single_open(file, dai_list_seq_show, NULL); -} - -static const struct file_operations dai_list_fops = { - .open = dai_list_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int platform_list_seq_show(struct seq_file *m, void *v) +static int platform_list_show(struct seq_file *s, void *v) { struct snd_soc_platform *platform; mutex_lock(&client_mutex); list_for_each_entry(platform, &platform_list, list) - seq_printf(m, "%s\n", platform->component.name); + seq_printf(s, "%s\n", platform->component.name); mutex_unlock(&client_mutex); return 0; } - -static int platform_list_seq_open(struct inode *inode, struct file *file) -{ - return single_open(file, platform_list_seq_show, NULL); -} - -static const struct file_operations platform_list_fops = { - .open = platform_list_seq_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(platform_list); static void soc_init_card_debugfs(struct snd_soc_card *card) { -- 2.16.1

1 0

[alsa-devel] [PATCH v9 0/8] TDA1997x HDMI video reciver
by Tim Harvey 09 Feb '18

09 Feb '18

This is a v4l2 subdev driver supporting the TDA1997x HDMI video receiver. I've tested this on a Gateworks GW54xx/GW551x with an IMX6Q/IMX6DL which uses the TDA19971 with 16bits connected to the IMX6 CSI and single-lane I2S audio providing 2-channel audio. For this configuration I've tested both 16bit YUV422 and 8bit BT656 parallel video bus modes. While the driver should support the TDA1993 I do not have one for testing. Further potential development efforts include: - CEC support - HDCP support - TDA19972 support (2 inputs) Media graphs can be found at http://dev.gateworks.com/docs/linux/media History: v9: - add digital video decoder video interface entity function v8: - fix clearing pad for VIDIOC_DV_TIMIGNS_CAP - support full range of input modes based on timings_cap - add patch to fix clearing pad for VIDIOC_DV_TIMIGINGS - fix available formats for tda19971 bt656 bus width >12 - fix set_format (compliance) - fixed get/set edid (compliance) - add init_cfg to setup default pad config (compliance) - added missing pad checks to get_dv_timings_cap/enum_dv_timings (compliance) - fix alignment of if statement and whitespace in comment (Hans) - move regs to tda1997x_regs.h to clean up (Hans) - add define and sanity check for num of mbus_codes (Hans) v7: - fix interlaced mode - support no AVI infoframe (ie DVI) (Hans) - add support for multiple output formats (Hans) v6: - tda1997x: fix return on regulator enablei in tda1997x_set_power() (Fabio) - tda1997x: fix colorspace handling (Hans) - bindings: added Robs's ack (Rob) - replace copyright with SPDX tag (Philippe) v5: - added v4l2_hdmi_colorimetry() patch from Hans to series - bindings: added Sakari's ack - tda1997x: uppercase string constants - tda1997x: use v4l2_hdmi_rx_coloriemtry to fill format - tda1997x: fix V4L2_CID_DV_RX_RGB_RANGE - tda1997x: fix interlaced mode format - dts: remove leading 0 from unit address - dts: add newline between property list and child node - dts: added missing audmux in GW551x dts v4: - move include/dt-bindings/media/tda1997x.h to bindings patch - clarify port node details in bindings - fix typos - fix default quant range for VGA - fix quant range handling and conv matrix - add additional standards and capabilities to timings_cap v3: - fix typo in dt bindings - added dt bindings for GW551x - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros - fixed missing break - use only hdmi_infoframe_log for infoframe logging - simplify tda1997x_s_stream error handling - add delayed work proc to handle hotplug enable/disable - fix set_edid (disable HPD before writing, enable after) - remove enabling edid by default - initialize timings - take quant range into account in colorspace conversion - remove vendor/product tracking (we provide this in log_status via infoframes) - add v4l_controls - add more detail to log_status - calculate vhref generator timings - timing detection fixes (rounding errors, hswidth errors) - rename configure_input/configure_conv functions v2: - encorporate feedback into dt bindings - change audio dt bindings - implement dv timings enum/cap - remove deprecated g_mbus_config op - fix dv_query_timings - add EDID get/set handling - remove max-pixel-rate support - add audio codec DAI support - added media-ctl and v4l2-compliance details v1: - initial RFC # media-ctl -d /dev/media0 -p Media controller API version 4.15.0 Media device information ------------------------ driver imx-media model imx-media serial bus info hw revision 0x0 driver version 4.15.0 Device topology - entity 1: adv7180 2-0020 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 20004 device node name /dev/v4l-subdev0 pad0: Source [fmt:UYVY8_2X8/720x480 field:interlaced colorspace:smpte170m] -> "ipu2_csi1_mux":1 [] - entity 3: tda19971 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev1 pad0: Source [fmt:UYVY8_2X8/1280x720 field:none colorspace:srgb] [dv.caps:BT.656/1120 min:640x350@13000000 max:1920x1200@165000000 stds:CEA-861,DMT,CVT,GTF caps:interlaced,progressive,reduced-blanking,custom] [dv.detect:BT.656/1120 1280x720p60 (1650x750) stds:CEA-861 flags:can-reduce-fps,CE-video,has-cea861-vic] [dv.current:BT.656/1120 1280x720p60 (1650x750) stds:CEA-861 flags:can-reduce-fps,CE-video,has-cea861-vic] -> "ipu1_csi0_mux":1 [ENABLED] - entity 5: ipu1_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev2 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] - entity 9: ipu2_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev3 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] - entity 13: ipu1_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev4 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_vdic":2 [] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf":0 [] - entity 17: ipu1_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev5 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc capture":0 [] - entity 20: ipu1_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0: Sink <- "ipu1_ic_prpenc":1 [] - entity 26: ipu1_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev6 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf capture":0 [] - entity 29: ipu1_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0: Sink <- "ipu1_ic_prpvf":1 [] - entity 35: ipu2_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev7 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_vdic":2 [] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf":0 [] - entity 39: ipu2_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev8 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc capture":0 [] - entity 42: ipu2_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0: Sink <- "ipu2_ic_prpenc":1 [] - entity 48: ipu2_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev9 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf capture":0 [] - entity 51: ipu2_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0: Sink <- "ipu2_ic_prpvf":1 [] - entity 57: ipu1_csi0 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev10 pad0: Sink [fmt:UYVY8_2X8/1280x720@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range crop.bounds:(0,0)/1280x720 crop:(0,0)/1280x720 compose.bounds:(0,0)/1280x720 compose:(0,0)/1280x720] <- "ipu1_csi0_mux":2 [ENABLED] pad1: Source [fmt:AYUV8_1X32/1280x720@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/1280x720@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range] -> "ipu1_csi0 capture":0 [ENABLED] - entity 61: ipu1_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0: Sink <- "ipu1_csi0":2 [ENABLED] - entity 67: ipu1_csi1 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev11 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi1 capture":0 [] - entity 71: ipu1_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0: Sink <- "ipu1_csi1":2 [] - entity 77: ipu2_csi0 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev12 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi0 capture":0 [] - entity 81: ipu2_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0: Sink <- "ipu2_csi0":2 [] - entity 87: ipu2_csi1 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev13 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu2_csi1_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi1 capture":0 [] - entity 91: ipu2_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0: Sink <- "ipu2_csi1":2 [] - entity 97: ipu1_csi0_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev14 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:UYVY8_2X8/1280x720 field:none colorspace:srgb] <- "tda19971 2-0048":0 [ENABLED] pad2: Source [fmt:UYVY8_2X8/1280x720 field:none colorspace:srgb] -> "ipu1_csi0":0 [ENABLED] - entity 101: ipu2_csi1_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev15 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "adv7180 2-0020":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu2_csi1":0 [] v4l2-compliance test results: - with the following kernel patches: v4l2-subdev: clear reserved fields v4l2-subdev: without controls return -ENOTTY # v4l2-compliance -u1 v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8 Media Driver Info: Driver name : imx-media Model : imx-media Serial : Bus info : Media version : 4.15.0 Hardware revision: 0x00000000 (0) Driver version : 4.15.0 Interface Info: ID : 0x0300008f Type : V4L Sub-Device Entity Info: ID : 0x00000003 (3) Name : tda19971 2-0048 Function : FAIL: Unknown Function (00006001) Pad 0x01000004 : Source Link 0x0200006f: to remote pad 0x1000063 of entity 'ipu1_csi0_mux': Data, Enabled Compliance test for device /dev/v4l-subdev1: Required ioctls: test MC information: FAIL Allow for multiple opens: test second /dev/v4l-subdev1 open: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK test VIDIOC_DV_TIMINGS_CAP: OK test VIDIOC_G/S_EDID: OK Sub-Device ioctls (Source Pad 0): test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Try VIDIOC_SUBDEV_G/S_FMT: OK test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK test Active VIDIOC_SUBDEV_G/S_FMT: OK test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) test VIDIOC_EXPBUF: OK (Not Supported) Total: 47, Succeeded: 46, Failed: 1, Warnings: 0 # v4l2-compliance -m0 -M v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8 Media Driver Info: Driver name : imx-media Model : imx-media Serial : Bus info : Media version : 4.15.0 Hardware revision: 0x00000000 (0) Driver version : 4.15.0 Compliance test for device /dev/media0: Required ioctls: test MEDIA_IOC_DEVICE_INFO: OK Allow for multiple opens: test second /dev/media0 open: OK test MEDIA_IOC_DEVICE_INFO: OK test for unlimited opens: OK Media Controller ioctls: fail: v4l2-test-media.cpp(94): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN fail: v4l2-test-media.cpp(156): checkFunction(ent.function, true) test MEDIA_IOC_G_TOPOLOGY: FAIL fail: v4l2-test-media.cpp(275): num_data_links != num_links test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL test MEDIA_IOC_SETUP_LINK: OK Total: 7, Succeeded: 5, Failed: 2, Warnings: 0 ^^^^ above failures are due to imx/adv7180 not setting a valid entity function Hans Verkuil (1): v4l2-dv-timings: add v4l2_hdmi_colorimetry() Tim Harvey (7): media: v4l-ioctl: fix clearing pad for VIDIOC_DV_TIMIGNS_CAP media: add digital video decoder video interface entity functions MAINTAINERS: add entry for NXP TDA1997x driver media: dt-bindings: Add bindings for TDA1997X media: i2c: Add TDA1997x HDMI receiver driver ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x .../devicetree/bindings/media/i2c/tda1997x.txt | 179 ++ Documentation/media/uapi/mediactl/media-types.rst | 11 + MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-gw54xx.dts | 105 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 138 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 2848 ++++++++++++++++++++ drivers/media/i2c/tda1997x_regs.h | 641 +++++ drivers/media/v4l2-core/v4l2-dv-timings.c | 141 + drivers/media/v4l2-core/v4l2-ioctl.c | 2 +- include/dt-bindings/media/tda1997x.h | 74 + include/media/i2c/tda1997x.h | 42 + include/media/v4l2-dv-timings.h | 21 + include/uapi/linux/media.h | 5 + 16 files changed, 4250 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tda1997x.txt create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 drivers/media/i2c/tda1997x_regs.h create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h -- 2.7.4

2 10