November 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 1/2] ALSA: hda/ca0132 - Add new ZxR quirk
by Connor McAdams 19 Nov '18

19 Nov '18

This patch adds a new PCI subsys ID for the ZxR, as found and tested by other users. Without a way to know if any Z's use it as well, it keeps the quirk of QUIRK_SBZ and goes through the HDA subsys test function. Signed-off-by: Connor McAdams <conmanx360(a)gmail.com> --- sound/pci/hda/patch_ca0132.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 9c0b94ba786e..4c21bd24bcbd 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1189,6 +1189,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE), SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ), SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ), + SND_PCI_QUIRK(0x1102, 0x0033, "Sound Blaster ZxR", QUIRK_SBZ), SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI), SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI), SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI), -- 2.18.1

2 3

[alsa-devel] [PATCH 1/5] ALSA: asihpi: clean up indentation, replace spaces with tab
by Colin King 19 Nov '18

19 Nov '18

From: Colin Ian King <colin.king(a)canonical.com> The struct declaration is not indented correctly. Fix this by replacing spaces with a tab. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/pci/asihpi/asihpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c index a31fe1550903..aad74e809797 100644 --- a/sound/pci/asihpi/asihpi.c +++ b/sound/pci/asihpi/asihpi.c @@ -1183,7 +1183,7 @@ static int snd_card_asihpi_capture_prepare(struct snd_pcm_substream *substream) static u64 snd_card_asihpi_capture_formats(struct snd_card_asihpi *asihpi, u32 h_stream) { - struct hpi_format hpi_format; + struct hpi_format hpi_format; u16 format; u16 err; u32 h_control; -- 2.19.1

3 9

[alsa-devel] [PATCH v2 1/2] ASoC: ak4118: Add support for AK4118 S/PDIF transceiver
by Clément Péron 19 Nov '18

19 Nov '18

From: Adrien Charruel <adrien.charruel(a)devialet.com> The AK4118A is a digital audio transceiver supporting 8 input channels at 192kHz and with 24bits resolution. It converts the S/PDIF signal to I2S format and is configurable over I2C. This driver introduce a minimal support of the AK4118, like selecting the input channel, reading input frequency and detecting some errors. Datasheet is available here: https://www.akm.com/akm/en/file/datasheet/AK4118AEQ.pdf Signed-off-by: Adrien Charruel <adrien.charruel(a)devialet.com> Signed-off-by: Clément Péron <peron.clem(a)gmail.com> --- v2: - request threaded_irq in driver probe - change fs_enum from VALUE_SINGLE to VALUE_ENUM_SINGLE sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak4118.c | 438 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 446 insertions(+) create mode 100644 sound/soc/codecs/ak4118.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 9cc4f1848c9b..62bdb7e333b8 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -35,6 +35,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_ADAU7002 select SND_SOC_ADS117X select SND_SOC_AK4104 if SPI_MASTER + select SND_SOC_AK4118 if I2C select SND_SOC_AK4458 if I2C select SND_SOC_AK4535 if I2C select SND_SOC_AK4554 @@ -392,6 +393,11 @@ config SND_SOC_AK4104 tristate "AKM AK4104 CODEC" depends on SPI_MASTER +config SND_SOC_AK4118 + tristate "AKM AK4118 CODEC" + depends on I2C + select REGMAP_I2C + config SND_SOC_AK4458 tristate "AKM AK4458 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 8ffab8c8dbfa..66f55d185620 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -27,6 +27,7 @@ snd-soc-adav801-objs := adav801.o snd-soc-adav803-objs := adav803.o snd-soc-ads117x-objs := ads117x.o snd-soc-ak4104-objs := ak4104.o +snd-soc-ak4118-objs := ak4118.o snd-soc-ak4458-objs := ak4458.o snd-soc-ak4535-objs := ak4535.o snd-soc-ak4554-objs := ak4554.o @@ -290,6 +291,7 @@ obj-$(CONFIG_SND_SOC_ADAV801) += snd-soc-adav801.o obj-$(CONFIG_SND_SOC_ADAV803) += snd-soc-adav803.o obj-$(CONFIG_SND_SOC_ADS117X) += snd-soc-ads117x.o obj-$(CONFIG_SND_SOC_AK4104) += snd-soc-ak4104.o +obj-$(CONFIG_SND_SOC_AK4118) += snd-soc-ak4118.o obj-$(CONFIG_SND_SOC_AK4458) += snd-soc-ak4458.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o obj-$(CONFIG_SND_SOC_AK4554) += snd-soc-ak4554.o diff --git a/sound/soc/codecs/ak4118.c b/sound/soc/codecs/ak4118.c new file mode 100644 index 000000000000..238ab29f2bf4 --- /dev/null +++ b/sound/soc/codecs/ak4118.c @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ak4118.c -- Asahi Kasei ALSA Soc Audio driver + * + * Copyright 2018 DEVIALET + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#include <sound/asoundef.h> +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#define AK4118_REG_CLK_PWR_CTL 0x00 +#define AK4118_REG_FORMAT_CTL 0x01 +#define AK4118_REG_IO_CTL0 0x02 +#define AK4118_REG_IO_CTL1 0x03 +#define AK4118_REG_INT0_MASK 0x04 +#define AK4118_REG_INT1_MASK 0x05 +#define AK4118_REG_RCV_STATUS0 0x06 +#define AK4118_REG_RCV_STATUS1 0x07 +#define AK4118_REG_RXCHAN_STATUS0 0x08 +#define AK4118_REG_RXCHAN_STATUS1 0x09 +#define AK4118_REG_RXCHAN_STATUS2 0x0a +#define AK4118_REG_RXCHAN_STATUS3 0x0b +#define AK4118_REG_RXCHAN_STATUS4 0x0c +#define AK4118_REG_TXCHAN_STATUS0 0x0d +#define AK4118_REG_TXCHAN_STATUS1 0x0e +#define AK4118_REG_TXCHAN_STATUS2 0x0f +#define AK4118_REG_TXCHAN_STATUS3 0x10 +#define AK4118_REG_TXCHAN_STATUS4 0x11 +#define AK4118_REG_BURST_PREAMB_PC0 0x12 +#define AK4118_REG_BURST_PREAMB_PC1 0x13 +#define AK4118_REG_BURST_PREAMB_PD0 0x14 +#define AK4118_REG_BURST_PREAMB_PD1 0x15 +#define AK4118_REG_QSUB_CTL 0x16 +#define AK4118_REG_QSUB_TRACK 0x17 +#define AK4118_REG_QSUB_INDEX 0x18 +#define AK4118_REG_QSUB_MIN 0x19 +#define AK4118_REG_QSUB_SEC 0x1a +#define AK4118_REG_QSUB_FRAME 0x1b +#define AK4118_REG_QSUB_ZERO 0x1c +#define AK4118_REG_QSUB_ABS_MIN 0x1d +#define AK4118_REG_QSUB_ABS_SEC 0x1e +#define AK4118_REG_QSUB_ABS_FRAME 0x1f +#define AK4118_REG_GPE 0x20 +#define AK4118_REG_GPDR 0x21 +#define AK4118_REG_GPSCR 0x22 +#define AK4118_REG_GPLR 0x23 +#define AK4118_REG_DAT_MASK_DTS 0x24 +#define AK4118_REG_RX_DETECT 0x25 +#define AK4118_REG_STC_DAT_DETECT 0x26 +#define AK4118_REG_RXCHAN_STATUS5 0x27 +#define AK4118_REG_TXCHAN_STATUS5 0x28 +#define AK4118_REG_MAX 0x29 + +#define AK4118_REG_FORMAT_CTL_DIF0 (1 << 4) +#define AK4118_REG_FORMAT_CTL_DIF1 (1 << 5) +#define AK4118_REG_FORMAT_CTL_DIF2 (1 << 6) + +struct ak4118_priv { + struct regmap *regmap; + struct gpio_desc *reset; + struct gpio_desc *irq; + struct snd_soc_component *component; +}; + +static const struct reg_default ak4118_reg_defaults[] = { + {AK4118_REG_CLK_PWR_CTL, 0x43}, + {AK4118_REG_FORMAT_CTL, 0x6a}, + {AK4118_REG_IO_CTL0, 0x88}, + {AK4118_REG_IO_CTL1, 0x48}, + {AK4118_REG_INT0_MASK, 0xee}, + {AK4118_REG_INT1_MASK, 0xb5}, + {AK4118_REG_RCV_STATUS0, 0x00}, + {AK4118_REG_RCV_STATUS1, 0x10}, + {AK4118_REG_TXCHAN_STATUS0, 0x00}, + {AK4118_REG_TXCHAN_STATUS1, 0x00}, + {AK4118_REG_TXCHAN_STATUS2, 0x00}, + {AK4118_REG_TXCHAN_STATUS3, 0x00}, + {AK4118_REG_TXCHAN_STATUS4, 0x00}, + {AK4118_REG_GPE, 0x77}, + {AK4118_REG_GPDR, 0x00}, + {AK4118_REG_GPSCR, 0x00}, + {AK4118_REG_GPLR, 0x00}, + {AK4118_REG_DAT_MASK_DTS, 0x3f}, + {AK4118_REG_RX_DETECT, 0x00}, + {AK4118_REG_STC_DAT_DETECT, 0x00}, + {AK4118_REG_TXCHAN_STATUS5, 0x00}, +}; + +static const char * const ak4118_input_select_txt[] = { + "RX0", "RX1", "RX2", "RX3", "RX4", "RX5", "RX6", "RX7", +}; +static SOC_ENUM_SINGLE_DECL(ak4118_insel_enum, AK4118_REG_IO_CTL1, 0x0, + ak4118_input_select_txt); + +static const struct snd_kcontrol_new ak4118_input_mux_controls = + SOC_DAPM_ENUM("Input Select", ak4118_insel_enum); + +static const char * const ak4118_iec958_fs_txt[] = { + "44100", "48000", "32000", "22050", "11025", "24000", "16000", "88200", + "8000", "96000", "64000", "176400", "192000", +}; + +static const int ak4118_iec958_fs_val[] = { + 0x0, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xA, 0xB, 0xC, 0xE, +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(ak4118_iec958_fs_enum, AK4118_REG_RCV_STATUS1, + 0x4, 0x4, ak4118_iec958_fs_txt, + ak4118_iec958_fs_val); + +static struct snd_kcontrol_new ak4118_iec958_controls[] = { + SOC_SINGLE("IEC958 Parity Errors", AK4118_REG_RCV_STATUS0, 0, 1, 0), + SOC_SINGLE("IEC958 No Audio", AK4118_REG_RCV_STATUS0, 1, 1, 0), + SOC_SINGLE("IEC958 PLL Lock", AK4118_REG_RCV_STATUS0, 4, 1, 1), + SOC_SINGLE("IEC958 Non PCM", AK4118_REG_RCV_STATUS0, 6, 1, 0), + SOC_ENUM("IEC958 Sampling Freq", ak4118_iec958_fs_enum), +}; + +static const struct snd_soc_dapm_widget ak4118_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("INRX0"), + SND_SOC_DAPM_INPUT("INRX1"), + SND_SOC_DAPM_INPUT("INRX2"), + SND_SOC_DAPM_INPUT("INRX3"), + SND_SOC_DAPM_INPUT("INRX4"), + SND_SOC_DAPM_INPUT("INRX5"), + SND_SOC_DAPM_INPUT("INRX6"), + SND_SOC_DAPM_INPUT("INRX7"), + SND_SOC_DAPM_MUX("Input Mux", SND_SOC_NOPM, 0, 0, + &ak4118_input_mux_controls), +}; + +static const struct snd_soc_dapm_route ak4118_dapm_routes[] = { + {"Input Mux", "RX0", "INRX0"}, + {"Input Mux", "RX1", "INRX1"}, + {"Input Mux", "RX2", "INRX2"}, + {"Input Mux", "RX3", "INRX3"}, + {"Input Mux", "RX4", "INRX4"}, + {"Input Mux", "RX5", "INRX5"}, + {"Input Mux", "RX6", "INRX6"}, + {"Input Mux", "RX7", "INRX7"}, +}; + + +static int ak4118_set_dai_fmt_master(struct ak4118_priv *ak4118, + unsigned int format) +{ + int dif; + + switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + dif = AK4118_REG_FORMAT_CTL_DIF0 | AK4118_REG_FORMAT_CTL_DIF2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + dif = AK4118_REG_FORMAT_CTL_DIF0 | AK4118_REG_FORMAT_CTL_DIF1; + break; + case SND_SOC_DAIFMT_LEFT_J: + dif = AK4118_REG_FORMAT_CTL_DIF2; + break; + default: + return -ENOTSUPP; + } + + return dif; +} + +static int ak4118_set_dai_fmt_slave(struct ak4118_priv *ak4118, + unsigned int format) +{ + int dif; + + switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + dif = AK4118_REG_FORMAT_CTL_DIF0 | AK4118_REG_FORMAT_CTL_DIF1 | + AK4118_REG_FORMAT_CTL_DIF2; + break; + case SND_SOC_DAIFMT_LEFT_J: + dif = AK4118_REG_FORMAT_CTL_DIF1 | AK4118_REG_FORMAT_CTL_DIF2; + break; + default: + return -ENOTSUPP; + } + + return dif; +} + +static int ak4118_set_dai_fmt(struct snd_soc_dai *dai, + unsigned int format) +{ + struct snd_soc_component *component = dai->component; + struct ak4118_priv *ak4118 = snd_soc_component_get_drvdata(component); + int dif; + int ret = 0; + + switch (format & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + /* component is master */ + dif = ak4118_set_dai_fmt_master(ak4118, format); + break; + case SND_SOC_DAIFMT_CBS_CFS: + /*component is slave */ + dif = ak4118_set_dai_fmt_slave(ak4118, format); + break; + default: + ret = -ENOTSUPP; + goto exit; + } + + /* format not supported */ + if (dif < 0) { + ret = dif; + goto exit; + } + + ret = regmap_update_bits(ak4118->regmap, AK4118_REG_FORMAT_CTL, + AK4118_REG_FORMAT_CTL_DIF0 | + AK4118_REG_FORMAT_CTL_DIF1 | + AK4118_REG_FORMAT_CTL_DIF2, dif); + if (ret < 0) + goto exit; + +exit: + return ret; +} + +static int ak4118_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + return 0; +} + +static const struct snd_soc_dai_ops ak4118_dai_ops = { + .hw_params = ak4118_hw_params, + .set_fmt = ak4118_set_dai_fmt, +}; + +static struct snd_soc_dai_driver ak4118_dai = { + .name = "ak4118-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_3LE | + SNDRV_PCM_FMTBIT_S24_LE + }, + .ops = &ak4118_dai_ops, +}; + +static irqreturn_t ak4118_irq_handler(int irq, void *data) +{ + struct ak4118_priv *ak4118 = data; + struct snd_soc_component *component = ak4118->component; + struct snd_kcontrol_new *kctl_new; + struct snd_kcontrol *kctl; + struct snd_ctl_elem_id *id; + unsigned int i; + + if (!component) + return IRQ_NONE; + + for (i = 0; i < ARRAY_SIZE(ak4118_iec958_controls); i++) { + kctl_new = &ak4118_iec958_controls[i]; + kctl = snd_soc_card_get_kcontrol(component->card, + kctl_new->name); + if (!kctl) + continue; + id = &kctl->id; + snd_ctl_notify(component->card->snd_card, + SNDRV_CTL_EVENT_MASK_VALUE, id); + } + + return IRQ_HANDLED; +} + +static int ak4118_probe(struct snd_soc_component *component) +{ + struct ak4118_priv *ak4118 = snd_soc_component_get_drvdata(component); + int ret = 0; + + ak4118->component = component; + + /* release reset */ + gpiod_set_value(ak4118->reset, 0); + + /* unmask all int1 sources */ + ret = regmap_write(ak4118->regmap, AK4118_REG_INT1_MASK, 0x00); + if (ret < 0) { + dev_err(component->dev, + "failed to write regmap 0x%x 0x%x: %d\n", + AK4118_REG_INT1_MASK, 0x00, ret); + return ret; + } + + /* rx detect enable on all channels */ + ret = regmap_write(ak4118->regmap, AK4118_REG_RX_DETECT, 0xff); + if (ret < 0) { + dev_err(component->dev, + "failed to write regmap 0x%x 0x%x: %d\n", + AK4118_REG_RX_DETECT, 0xff, ret); + return ret; + } + + ret = snd_soc_add_component_controls(component, ak4118_iec958_controls, + ARRAY_SIZE(ak4118_iec958_controls)); + if (ret) { + dev_err(component->dev, + "failed to add component kcontrols: %d\n", ret); + return ret; + } + + return 0; +} + +static void ak4118_remove(struct snd_soc_component *component) +{ + struct ak4118_priv *ak4118 = snd_soc_component_get_drvdata(component); + + /* hold reset */ + gpiod_set_value(ak4118->reset, 1); +} + +static const struct snd_soc_component_driver soc_component_drv_ak4118 = { + .probe = ak4118_probe, + .remove = ak4118_remove, + .dapm_widgets = ak4118_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ak4118_dapm_widgets), + .dapm_routes = ak4118_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(ak4118_dapm_routes), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config ak4118_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .reg_defaults = ak4118_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(ak4118_reg_defaults), + + .cache_type = REGCACHE_NONE, + .max_register = AK4118_REG_MAX - 1, +}; + +static int ak4118_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct ak4118_priv *ak4118; + int ret; + + ak4118 = devm_kzalloc(&i2c->dev, sizeof(struct ak4118_priv), + GFP_KERNEL); + if (ak4118 == NULL) + return -ENOMEM; + + ak4118->regmap = devm_regmap_init_i2c(i2c, &ak4118_regmap); + if (IS_ERR(ak4118->regmap)) + return PTR_ERR(ak4118->regmap); + + i2c_set_clientdata(i2c, ak4118); + + ak4118->reset = devm_gpiod_get(&i2c->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ak4118->reset)) { + ret = PTR_ERR(ak4118->reset); + if (ret != -EPROBE_DEFER) + dev_err(&i2c->dev, "Failed to get reset: %d\n", ret); + return ret; + } + + ak4118->irq = devm_gpiod_get(&i2c->dev, "irq", GPIOD_IN); + if (IS_ERR(ak4118->irq)) { + ret = PTR_ERR(ak4118->irq); + if (ret != -EPROBE_DEFER) + dev_err(&i2c->dev, "Failed to get IRQ: %d\n", ret); + return ret; + } + + ret = devm_request_threaded_irq(&i2c->dev, gpiod_to_irq(ak4118->irq), + NULL, ak4118_irq_handler, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "ak4118-irq", ak4118); + if (ret < 0) { + dev_err(&i2c->dev, "Fail to request_irq: %d\n", ret); + return ret; + } + + return snd_soc_register_component(&i2c->dev, &soc_component_drv_ak4118, + &ak4118_dai, 1); +} + +static int ak4118_i2c_remove(struct i2c_client *i2c) +{ + snd_soc_unregister_component(&i2c->dev); + return 0; +} + +static const struct of_device_id ak4118_of_match[] = { + { .compatible = "asahi-kasei,ak4118", }, + {} +}; +MODULE_DEVICE_TABLE(of, ak4118_of_match); + +static const struct i2c_device_id ak4118_id_table[] = { + { "ak4118", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ak4118_id_table); + +static struct i2c_driver ak4118_i2c_driver = { + .driver = { + .name = "ak4118", + .of_match_table = of_match_ptr(ak4118_of_match), + }, + .id_table = ak4118_id_table, + .probe = ak4118_i2c_probe, + .remove = ak4118_i2c_remove, +}; + +module_i2c_driver(ak4118_i2c_driver); + +MODULE_DESCRIPTION("Asahi Kasei AK4118 ALSA SoC driver"); +MODULE_AUTHOR("Adrien Charruel <adrien.charruel(a)devialet.com>"); +MODULE_LICENSE("GPL"); -- 2.19.1

3 6

[alsa-devel] [PATCH v2] ASoC: rt5663: Add documentation for power supply support
by Cheng-Yi Chiang 17 Nov '18

17 Nov '18

rt5663 codec driver will support setting CPVDD and AVDD power supply from device tree. Signed-off-by: Cheng-Yi Chiang <cychiang(a)chromium.org> --- Moved power supply properties to required properties. Documentation/devicetree/bindings/sound/rt5663.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index 23386446c63d6..2a55e91334082 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -10,6 +10,10 @@ Required properties: - interrupts : The CODEC's interrupt output. +- avdd-supply: Power supply for AVDD, providing 1.8V. + +- cpvdd-supply: Power supply for CPVDD, providing 3.5V. + Optional properties: - "realtek,dc_offset_l_manual" @@ -51,4 +55,6 @@ rt5663: codec@12 { compatible = "realtek,rt5663"; reg = <0x12>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&pp1800_a_alc5662>; + cpvdd-supply = <&pp3500_a_alc5662>; }; -- 2.19.1.1215.g8438c0b245-goog

2 1

[alsa-devel] Applied "ASoC: Convert a few more users to using %pOFn instead of device_node.name" to the asoc tree
by Mark Brown 17 Nov '18

17 Nov '18

The patch ASoC: Convert a few more users to using %pOFn instead of device_node.name has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From dc43d3aa045c6588f163f4c0f5084e09cb5c0295 Mon Sep 17 00:00:00 2001 From: Rob Herring <robh(a)kernel.org> Date: Fri, 16 Nov 2018 15:43:49 -0600 Subject: [PATCH] ASoC: Convert a few more users to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: Olivier Moysan <olivier.moysan(a)st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Cc: Maxime Coquelin <mcoquelin.stm32(a)gmail.com> Cc: Alexandre Torgue <alexandre.torgue(a)st.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Cc: linux-arm-kernel(a)lists.infradead.org Signed-off-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 2 +- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 2 +- sound/soc/stm/stm32_sai.c | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c index 192f4d7b37b6..bff7d71d0742 100644 --- a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c +++ b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c @@ -828,7 +828,7 @@ static int mt6797_afe_pcm_dev_probe(struct platform_device *pdev) /* request irq */ irq_id = platform_get_irq(pdev, 0); if (!irq_id) { - dev_err(dev, "%s no irq found\n", dev->of_node->name); + dev_err(dev, "%pOFn no irq found\n", dev->of_node); return -ENXIO; } ret = devm_request_irq(dev, irq_id, mt6797_afe_irq_handler, diff --git a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c index c0b6697503fd..166aed28330d 100644 --- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c +++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c @@ -1092,7 +1092,7 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev) irq_id = platform_get_irq(pdev, 0); if (irq_id <= 0) { - dev_err(afe->dev, "np %s no irq\n", afe->dev->of_node->name); + dev_err(afe->dev, "np %pOFn no irq\n", afe->dev->of_node); return irq_id < 0 ? irq_id : -ENXIO; } ret = devm_request_irq(afe->dev, irq_id, mt8173_afe_irq_handler, diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c index d597eba61992..bcb35cae2a2c 100644 --- a/sound/soc/stm/stm32_sai.c +++ b/sound/soc/stm/stm32_sai.c @@ -74,14 +74,14 @@ static int stm32_sai_sync_conf_provider(struct stm32_sai_data *sai, int synco) return ret; } - dev_dbg(&sai->pdev->dev, "Set %s%s as synchro provider\n", - sai->pdev->dev.of_node->name, + dev_dbg(&sai->pdev->dev, "Set %pOFn%s as synchro provider\n", + sai->pdev->dev.of_node, synco == STM_SAI_SYNC_OUT_A ? "A" : "B"); prev_synco = FIELD_GET(SAI_GCR_SYNCOUT_MASK, readl_relaxed(sai->base)); if (prev_synco != STM_SAI_SYNC_OUT_NONE && synco != prev_synco) { - dev_err(&sai->pdev->dev, "%s%s already set as sync provider\n", - sai->pdev->dev.of_node->name, + dev_err(&sai->pdev->dev, "%pOFn%s already set as sync provider\n", + sai->pdev->dev.of_node, prev_synco == STM_SAI_SYNC_OUT_A ? "A" : "B"); clk_disable_unprepare(sai->pclk); return -EINVAL; -- 2.19.1

1 0

[alsa-devel] [PATCH][next] ASoC: amd: fix spelling mistake "Inavlid" -> "Invalid"
by Colin King 17 Nov '18

17 Nov '18

From: Colin Ian King <colin.king(a)canonical.com> There is a spelling mistake in a dev_err message. Fix this. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/soc/amd/raven/pci-acp3x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/amd/raven/pci-acp3x.c b/sound/soc/amd/raven/pci-acp3x.c index ef805e71a98f..c28457fd9b81 100644 --- a/sound/soc/amd/raven/pci-acp3x.c +++ b/sound/soc/amd/raven/pci-acp3x.c @@ -105,7 +105,7 @@ static int snd_acp3x_probe(struct pci_dev *pci, } break; default: - dev_err(&pci->dev, "Inavlid ACP audio mode : %d\n", val); + dev_err(&pci->dev, "Invalid ACP audio mode : %d\n", val); ret = -ENODEV; goto unmap_mmio; } -- 2.19.1

2 1

[alsa-devel] [PATCH] ASoC: rt5663: Fix error handling of regulator_set_load
by Cheng-Yi Chiang 17 Nov '18

17 Nov '18

The default implementation of regulator_set_load returns REGULATOR_MODE_NORMAL, which is positive. rt5663_i2c_probe should only do error handling when return value of regulator_set_load is negative. In this case, rt5663_i2c_probe should return error. Also, consolidate err_irq into err_enable. Fix the missing goto for temporary regmap and rt5663->regmap. Signed-off-by: Cheng-Yi Chiang <cychiang(a)chromium.org> --- This patch is the fixup of the patch e81a2a6d12e85 ASoC: rt5663: Add regulator support sound/soc/codecs/rt5663.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index bb2c1ee4a836f..473a54d1ae2c5 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -3522,10 +3522,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++) { ret = regulator_set_load(rt5663->supplies[i].consumer, RT5663_SUPPLY_CURRENT_UA); - if (ret) { + if (ret < 0) { dev_err(&i2c->dev, - "Failed to set regulator %s, ret: %d\n", + "Failed to set regulator load on %s, ret: %d\n", rt5663->supplies[i].supply, ret); + return ret; } } @@ -3543,7 +3544,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(regmap); dev_err(&i2c->dev, "Failed to allocate temp register map: %d\n", ret); - return ret; + goto err_enable; } ret = regmap_read(regmap, RT5663_VENDOR_ID_2, &val); @@ -3576,7 +3577,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(rt5663->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); - return ret; + goto err_enable; } /* reset and calibrate */ @@ -3686,17 +3687,19 @@ static int rt5663_i2c_probe(struct i2c_client *i2c, rt5663_dai, ARRAY_SIZE(rt5663_dai)); if (ret) - goto err_irq; + goto err_enable; return 0; -err_irq: + + /* + * Error after enabling regulators should goto err_enable + * to disable regulators. + */ +err_enable: if (i2c->irq) free_irq(i2c->irq, rt5663); -err_enable: - dev_err(&i2c->dev, - "%s: Disable regulator after probe error\n", __func__); regulator_bulk_disable(ARRAY_SIZE(rt5663->supplies), rt5663->supplies); return ret; } -- 2.19.1.1215.g8438c0b245-goog

2 2

[alsa-devel] [PATCH v3 0/2] Introduce dmic mode switch delay parameter
by Jenny TC 17 Nov '18

17 Nov '18

Some DMICs need clock to be running for a specified duration as per the DMIC spec to complete the mode transition like sleep to normal, off to normal etc. This series add a mode-switch delay which will prevent the clock from being turned off without complying with manufacturer timing specifications. Also introduces a module parameter for the wakeup_delay parameter. v1: First patch set v2: 1). Removed ACPI device entry since a) The DMIC vendor doesn't have an ACPI vendor ID b) The ACPI enumeration creates one more device and conflicts with the existing skl.c dmic platform device registration. 2). Updated commit message v3: Updated commit message and introduced module param for wakeup_delay Jenny TC (2): ASoC: dmic: introduce mode switch delay ASoC: dmic: introduce module_param wakeup_delay sound/soc/codecs/dmic.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) -- 1.9.1

4 5

[alsa-devel] [PATCH] ASoC: Convert a few more users to using %pOFn instead of device_node.name
by Rob Herring 16 Nov '18

16 Nov '18

In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: Olivier Moysan <olivier.moysan(a)st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Cc: Maxime Coquelin <mcoquelin.stm32(a)gmail.com> Cc: Alexandre Torgue <alexandre.torgue(a)st.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-stm32(a)st-md-mailman.stormreply.com Cc: linux-arm-kernel(a)lists.infradead.org Signed-off-by: Rob Herring <robh(a)kernel.org> --- sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 2 +- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 2 +- sound/soc/stm/stm32_sai.c | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c index 192f4d7b37b6..bff7d71d0742 100644 --- a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c +++ b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c @@ -828,7 +828,7 @@ static int mt6797_afe_pcm_dev_probe(struct platform_device *pdev) /* request irq */ irq_id = platform_get_irq(pdev, 0); if (!irq_id) { - dev_err(dev, "%s no irq found\n", dev->of_node->name); + dev_err(dev, "%pOFn no irq found\n", dev->of_node); return -ENXIO; } ret = devm_request_irq(dev, irq_id, mt6797_afe_irq_handler, diff --git a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c index c0b6697503fd..166aed28330d 100644 --- a/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c +++ b/sound/soc/mediatek/mt8173/mt8173-afe-pcm.c @@ -1092,7 +1092,7 @@ static int mt8173_afe_pcm_dev_probe(struct platform_device *pdev) irq_id = platform_get_irq(pdev, 0); if (irq_id <= 0) { - dev_err(afe->dev, "np %s no irq\n", afe->dev->of_node->name); + dev_err(afe->dev, "np %pOFn no irq\n", afe->dev->of_node); return irq_id < 0 ? irq_id : -ENXIO; } ret = devm_request_irq(afe->dev, irq_id, mt8173_afe_irq_handler, diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c index d597eba61992..bcb35cae2a2c 100644 --- a/sound/soc/stm/stm32_sai.c +++ b/sound/soc/stm/stm32_sai.c @@ -74,14 +74,14 @@ static int stm32_sai_sync_conf_provider(struct stm32_sai_data *sai, int synco) return ret; } - dev_dbg(&sai->pdev->dev, "Set %s%s as synchro provider\n", - sai->pdev->dev.of_node->name, + dev_dbg(&sai->pdev->dev, "Set %pOFn%s as synchro provider\n", + sai->pdev->dev.of_node, synco == STM_SAI_SYNC_OUT_A ? "A" : "B"); prev_synco = FIELD_GET(SAI_GCR_SYNCOUT_MASK, readl_relaxed(sai->base)); if (prev_synco != STM_SAI_SYNC_OUT_NONE && synco != prev_synco) { - dev_err(&sai->pdev->dev, "%s%s already set as sync provider\n", - sai->pdev->dev.of_node->name, + dev_err(&sai->pdev->dev, "%pOFn%s already set as sync provider\n", + sai->pdev->dev.of_node, prev_synco == STM_SAI_SYNC_OUT_A ? "A" : "B"); clk_disable_unprepare(sai->pclk); return -EINVAL; -- 2.19.1

1 0

Re: [alsa-devel] Controlling the Tascam FW-1884
by Takashi Sakamoto 16 Nov '18

16 Nov '18

Hi Scott, (C.Ced to alsa-devel, ffado-devel) On Sep 7 2018 23:01, Scott Bahling wrote: > I recently got my hands on a FW-1884 and would like to get it working in > Linux. I'm mostly interested in using the control interface which should > support several midi control interface protocols like Mackie Control or > Mackie HUI. From the user manual it appears that the host computer needs to > set the registers on the FW-1884 to switch modes (they reference Windows > applications). > > I see that you have recently been working on user space support asynchronous > commands to such devices. The hinawa_utils code has some beginnings of > support for setting options on the Tascam devices and I have just started > playing with that. Thanks for your suggestion. At present, the most of features on control surface of FW-1884 are not available, especially for fader, knob and start/stop buttons. In data transmission between system and devices on IEEE 1394 bus, both of asynchronous transactions and isochronous packet streams are available. In a case of TASCAM FireWire series, messages via MIDI physical interface is bypassed to asynchronous transaction, while messages generated on control surface are bypassed to isochronous packets, multiplexed with PCM frames. When enabling multiplexing messages to isochronous packet, demultiplexer should be implemented to ALSA firewire-tascam driver, but not yet. You can see my initial RFC in alsa-devel[1]. This patch enables userspace applications to perform the demultiplexing, however this idea easily brings cache-coherency problems due to page mapping between kernel/userspace and impossible to be applied. We need to investigate another idea to achieve the demultiplexing in kernel land. As another option, according to page 26 in 'TASCAM FW-1884 Owner's Manual', when programming Keys to port 1-4, system could receive MIDI messages from control surface of FW-1884. However, I've not investigated it. > How are you determining the registers and flags? Do you have documentation, > or are you reverse engineering? Do you know the registers and flags for > setting the control protocol? > > If you have any hints on how figure out the proper registers and flags I'm > happy to contribute to the work you have started and help support more > functions of the FW-1884. User manuals are documents to which we can refer. The most vendors licenses their drivers/software with EULA and in most cases it can't allow users to binary-based reverse engineering. All of my work are done with external protocol analyzer unit on IEEE 1394 bus. When working to implement drivers, I read/classified/parsed content of many packets sniffed by the analyzer. An initial idea of libhinawa/hinawa-utils is to assist this my work. I heard FFADO developers uses some ways for this type of work: - Usage of host controller of TI PCILynx and driver module (nosy.ko) - Windows application; bushound[2] However, this type of work takes you long time, so I don't necessarily recommend you. It's 2018 and I think you can find alternative control surfaces on USB. If you take long time to make devices available on GNU/Linux, it's better to select devices on 'live' buses instead of 'legacy' buses such as IEEE 1394 bus, IMO. In a case of USB, wireshark with usbcap is the easiest way for us to sniff packets on Windows. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/094817.html [2] http://perisoft.net/bushound/ Regards Takashi Sakamoto

2 21