January 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [-next PATCH 0/4] sysfs and DEVICE_ATTR_<foo>
by Joe Perches 10 Jan '18

10 Jan '18

16 24

Re: [alsa-devel] [PATCH v2] ASoC: sgtl5000: Fix powerup/down of micbias
by Fischer, Christian 10 Jan '18

10 Jan '18

Hello Fabio, is it now ok? I'm not working with linux-git, so my patch is created by myself. Regards, Christian Signed-off-by: Christian Fischer <fischerc(a)swissphone.de> --- sound/soc/codecs/sgtl5000.c +++ sound/soc/codecs/sgtl5000.c @@ -260,6 +260,9 @@ static const struct snd_soc_dapm_widget SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event), SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event), + + SND_SOC_DAPM_PRE("MIC_BIAS_PRE", mic_bias_event), + SND_SOC_DAPM_POST("MIC_BIAS_POST", mic_bias_event), }; /* routes for sgtl5000 */ -----Ursprüngliche Nachricht----- Von: Fabio Estevam [mailto:festevam@gmail.com] Gesendet: Mittwoch, 10. Januar 2018 13:42 An: Fischer, Christian <fischerc(a)swissphone.de> Cc: alsa-devel(a)alsa-project.org; Takashi Iwai <tiwai(a)suse.com>; Mark Brown <broonie(a)kernel.org>; Liam Girdwood <lgirdwood(a)gmail.com> Betreff: Re: [alsa-devel] [PATCH] ASoC: sgtl5000: Fix powerup/down of micbias Hi Christian, On Wed, Jan 10, 2018 at 8:07 AM, Fischer, Christian <fischerc(a)swissphone.de> wrote: > The bias-bias-voltage should powered up/down automatically. > Added missing DAPM_PRE and DAPM_POST widgets to fire up the mic_bias_event function. Thanks for submitting the patch. You missed your Signed-off-by tag. Please resend it. Thanks

2 1

Re: [alsa-devel] ASoC: sgtl5000: recording issue at 8 kHz with fsl-imx28
by Fischer, Christian 10 Jan '18

10 Jan '18

It's me again. I just found out that the audio playback is affected by this problem too. Maybe this can serve as a hint. Regards, Christian -----Ursprüngliche Nachricht----- Von: alsa-devel-bounces(a)alsa-project.org [mailto:alsa-devel-bounces@alsa-project.org] Im Auftrag von Fischer, Christian Gesendet: Mittwoch, 10. Januar 2018 11:31 An: alsa-devel(a)alsa-project.org Cc: 'Takashi Iwai' <tiwai(a)suse.com>; 'Mark Brown' <broonie(a)kernel.org>; 'Liam Girdwood' <lgirdwood(a)gmail.com> Betreff: [alsa-devel] ASoC: sgtl5000: recording issue at 8 kHz with fsl-imx28 Hello guys, trying to record from a SGTL5000 with 8 kHz sampling rate gives a very bad audio quality. All other sampling rates working fine. Initially posted at NXP forum: https://community.nxp.com/message/975131 Tested with imx28, sgtl5000 and Kernel 4.14.12. I've attached a recording with 8 kHz, capture-vol was 67, mic-gain 33, AVC-off and Capture-ZC off. Recorded with "arecord -D "hw:0,1" -t wav -f S16_LE -c 2 -r 8000 test.wav". Sounds like there are missing samples.. The microphone is powered from mic-bias and decoupled with a 100nF capacitor. Can anybody help me? Thank you guys! Kind regards, Christian Fischer

1 0

[alsa-devel] [RESEND PATCH v9 00/13] Add STM32 DFSDM support
by Arnaud Pouliquen 10 Jan '18

10 Jan '18

Hello Mark, Here is the resend of the patchset. I added the Reviewed-by: Jonathan Cameron in patch 10/13. Jonathan's comment for you, posted for this version: >So Mark, over to you. I'm happy if you want to do the immutable branch once >any issue you find are fixed, or I can do it. >I'm just looking for acks or a pull request now. History: Version 9 fix patch 10/13: IIO: ADC: add stm32 DFSDM support for PDM microphone Main deltas V9 vs V8: - Rework probe and remove order for audio configuration in stm32-dfsdm-adc.c. - Optimization of the filling of the dma_slave_config struct. Main deltas V8 vs V7: - Few typos fixes. - Function return optimizations in sound/soc/stm/stm32_adfsdm.c. Main deltas V7 vs V6: - Replaces the custom license information text with the appropriate SPDX identifier. - Few fixes in sound/soc/stm/stm32_adfsdm.c and stm32-dfsdm-core.c. - Add missing #interrupt-cells in binding examples. - Integrate last Jonathan's comments. Main deltas V6 vs V5: - Fix warning reported by kbuild test in : include/linux/iio/consumer.h sound/soc/stm/stm32_adfsdm.c Main deltas V5 vs V4: - Integrate ASOC DAI as a subnode of the DFSDM. - Add in kernel consumer interface to allow to manipulate attribute. Thanks, Arnaud Arnaud Pouliquen (12): docs: driver-api: add iio hw consumer section IIO: hw_consumer: add devm_iio_hw_consumer_alloc IIO: inkern: API for manipulating channel attributes IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM core support IIO: ADC: add STM32 DFSDM sigma delta ADC support IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support Lars-Peter Clausen (1): iio: Add hardware consumer buffer support .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 16 + .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 128 +++ .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 63 + Documentation/driver-api/iio/hw-consumer.rst | 51 + Documentation/driver-api/iio/index.rst | 1 + drivers/iio/adc/Kconfig | 37 + drivers/iio/adc/Makefile | 3 + drivers/iio/adc/sd_adc_modulator.c | 68 ++ drivers/iio/adc/stm32-dfsdm-adc.c | 1216 ++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 309 +++++ drivers/iio/adc/stm32-dfsdm.h | 310 +++++ drivers/iio/buffer/Kconfig | 10 + drivers/iio/buffer/Makefile | 1 + drivers/iio/buffer/industrialio-buffer-cb.c | 11 + drivers/iio/buffer/industrialio-hw-consumer.c | 247 ++++ drivers/iio/inkern.c | 17 +- include/linux/iio/adc/stm32-dfsdm-adc.h | 18 + include/linux/iio/consumer.h | 37 + include/linux/iio/hw-consumer.h | 21 + include/linux/iio/iio.h | 28 - include/linux/iio/types.h | 28 + sound/soc/stm/Kconfig | 11 + sound/soc/stm/Makefile | 3 + sound/soc/stm/stm32_adfsdm.c | 347 ++++++ 25 files changed, 2961 insertions(+), 33 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 Documentation/driver-api/iio/hw-consumer.rst create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h create mode 100644 include/linux/iio/hw-consumer.h create mode 100644 sound/soc/stm/stm32_adfsdm.c -- 2.7.4

3 16

[alsa-devel] [PATCH 1/2] soundwire: Fix a signedness bug
by Dan Carpenter 10 Jan '18

10 Jan '18

"ret" is an int and "buf" is a u8. sdw_read() returns negative error codes which are truncated to the u8, 0-255 range before being stored as an int. It means that "ret" can't be less than zero. Fixes: b0a9c37b0178 ("soundwire: Add slave status handling") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 4c345197eb55..ac88031f7664 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -771,12 +771,13 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) sdw_modify_slave_status(slave, SDW_SLAVE_ALERT); /* Read Instat 1, Instat 2 and Instat 3 registers */ - ret = buf = sdw_read(slave, SDW_SCP_INT1); + ret = sdw_read(slave, SDW_SCP_INT1); if (ret < 0) { dev_err(slave->bus->dev, "SDW_SCP_INT1 read failed:%d", ret); return ret; } + buf = ret; ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, buf2); if (ret < 0) { @@ -870,12 +871,13 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave) * Read status again to ensure no new interrupts arrived * while servicing interrupts. */ - ret = _buf = sdw_read(slave, SDW_SCP_INT1); + ret = sdw_read(slave, SDW_SCP_INT1); if (ret < 0) { dev_err(slave->bus->dev, "SDW_SCP_INT1 read failed:%d", ret); return ret; } + _buf = ret; ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, _buf2); if (ret < 0) {

3 6

[alsa-devel] [PATCH] ASoC: sgtl5000: Fix powerup/down of micbias
by Fischer, Christian 10 Jan '18

10 Jan '18

The bias-bias-voltage should powered up/down automatically. Added missing DAPM_PRE and DAPM_POST widgets to fire up the mic_bias_event function. --- sound/soc/codecs/sgtl5000.c +++ sound/soc/codecs/sgtl5000.c @@ -260,6 +260,9 @@ static const struct snd_soc_dapm_widget SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event), SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event), + + SND_SOC_DAPM_PRE("MIC_BIAS_PRE", mic_bias_event), + SND_SOC_DAPM_POST("MIC_BIAS_POST", mic_bias_event), }; /* routes for sgtl5000 */

2 1

[alsa-devel] [PATCH v7 00/13] Add STM32 DFSDM support
by Arnaud Pouliquen 10 Jan '18

10 Jan '18

Hello, Here is a new version integrating last comments Main deltas V7 vs V6: - Replaces the custom license information text with the appropriate SPDX identifier. - Few fixes in sound/soc/stm/stm32_adfsdm.c and stm32-dfsdm-core.c. - Add missing #interrupt-cells in binding examples. - Integrate last Jonathan's comments. Main deltas V6 vs V5: - Fix warning reported by kbuild test in : include/linux/iio/consumer.h sound/soc/stm/stm32_adfsdm.c Main deltas V5 vs V4: - Integrate ASOC DAI as a subnode of the DFSDM. - Add in kernel consumer interface to allow to manipulate attribute. Regards, Arnaud Arnaud Pouliquen (12): docs: driver-api: add iio hw consumer section IIO: hw_consumer: add devm_iio_hw_consumer_alloc IIO: inkern: API for manipulating channel attributes IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM core support IIO: ADC: add STM32 DFSDM sigma delta ADC support IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support Lars-Peter Clausen (1): iio: Add hardware consumer buffer support .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 16 + .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 128 ++ .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 63 + Documentation/driver-api/iio/hw-consumer.rst | 51 + Documentation/driver-api/iio/index.rst | 1 + drivers/iio/adc/Kconfig | 37 + drivers/iio/adc/Makefile | 3 + drivers/iio/adc/sd_adc_modulator.c | 68 ++ drivers/iio/adc/stm32-dfsdm-adc.c | 1220 ++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 309 +++++ drivers/iio/adc/stm32-dfsdm.h | 310 +++++ drivers/iio/buffer/Kconfig | 10 + drivers/iio/buffer/Makefile | 1 + drivers/iio/buffer/industrialio-buffer-cb.c | 11 + drivers/iio/buffer/industrialio-hw-consumer.c | 247 ++++ drivers/iio/inkern.c | 18 +- include/linux/iio/adc/stm32-dfsdm-adc.h | 18 + include/linux/iio/consumer.h | 37 + include/linux/iio/hw-consumer.h | 21 + include/linux/iio/iio.h | 28 - include/linux/iio/types.h | 28 + sound/soc/stm/Kconfig | 11 + sound/soc/stm/Makefile | 3 + sound/soc/stm/stm32_adfsdm.c | 351 ++++++ 25 files changed, 2970 insertions(+), 33 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 Documentation/driver-api/iio/hw-consumer.rst create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h create mode 100644 include/linux/iio/hw-consumer.h create mode 100644 sound/soc/stm/stm32_adfsdm.c -- 2.7.4

3 22

[alsa-devel] [PATCH v5 00/13] Add STM32 DFSDM support
by Arnaud Pouliquen 10 Jan '18

10 Jan '18

Hello, Here is a new version integrating remarks from Rob and Jonathan. Main deltas vs V4: - Integrate ASOC DAI not as a subnode of the DFSDM. - Add in kernel consumer interface to allow to manipulate attribute. Context reminder: ----------------- DFSDM peripheral is a peripheral that allows to connect some sigma delta ADCs or PDM microphones via a SPI or Manchester bus. DFSDM integrates digital filters to offer up to 24 bits final resolution. In term of SW architecture. 2 use-cases have to be supported: 1) Sigma delta ADC conversion through IIO framework. Sigma delta ADC is handled by generic sigma delta modulator driver. DFSDM peripheral is binded to a SD modulator ADC using the IIO HW consumer interface. Please notice that IIO HW consumer interface has be proposed by Lars, but is part of this patchset with Lars's agreement. User interface is IIO one. Notice that this patch-set propose only a raw conversion, to simplify review. Buffer and trigger management will be added in next patch-sets. 2) PDM microphone record through ALSA framework. PDM microphone is handled by ASOC Generic DMIC codec driver. ADFSDM ASOC DAI driver is binded to IIO driver using the IIO consumer interface ADFSDM ASOC DAI driver is binded to a PDM microphone ASOC component using ASOC Of_graph. User interface is ALSA one. As IIO DMA management is not adapted to an audio realtime stream. A specific DMA management has been implemented in IIO driver for audio purposes. Regards, Arnaud Arnaud Pouliquen (12): docs: driver-api: add iio hw consumer section IIO: hw_consumer: add devm_iio_hw_consumer_alloc IIO: inkern: API for manipulating channel attributes IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM core support IIO: ADC: add STM32 DFSDM sigma delta ADC support IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support Lars-Peter Clausen (1): iio: Add hardware consumer buffer support .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 16 + .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 127 ++ .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 62 + Documentation/driver-api/iio/hw-consumer.rst | 51 + Documentation/driver-api/iio/index.rst | 1 + drivers/iio/adc/Kconfig | 37 + drivers/iio/adc/Makefile | 3 + drivers/iio/adc/sd_adc_modulator.c | 81 ++ drivers/iio/adc/stm32-dfsdm-adc.c | 1232 ++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 318 +++++ drivers/iio/adc/stm32-dfsdm.h | 319 +++++ drivers/iio/buffer/Kconfig | 10 + drivers/iio/buffer/Makefile | 1 + drivers/iio/buffer/industrialio-buffer-cb.c | 11 + drivers/iio/buffer/industrialio-hw-consumer.c | 248 ++++ drivers/iio/inkern.c | 18 +- include/linux/iio/adc/stm32-dfsdm-adc.h | 28 + include/linux/iio/consumer.h | 37 + include/linux/iio/hw-consumer.h | 22 + sound/soc/stm/Kconfig | 11 + sound/soc/stm/Makefile | 3 + sound/soc/stm/stm32_adfsdm.c | 386 ++++++ 23 files changed, 3030 insertions(+), 5 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 Documentation/driver-api/iio/hw-consumer.rst create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h create mode 100644 include/linux/iio/hw-consumer.h create mode 100644 sound/soc/stm/stm32_adfsdm.c -- 2.7.4

4 21

[alsa-devel] Applied "IIO: inkern: API for manipulating channel attributes" to the asoc tree
by Mark Brown 10 Jan '18

10 Jan '18

The patch IIO: inkern: API for manipulating channel attributes has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 34739a213dbb85c8d775de42d52358255059c257 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Date: Wed, 10 Jan 2018 11:13:06 +0100 Subject: [PATCH] IIO: inkern: API for manipulating channel attributes Extend the inkern API with functions for reading and writing attribute of iio channels. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- drivers/iio/inkern.c | 17 ++++++++++++----- include/linux/iio/consumer.h | 26 ++++++++++++++++++++++++++ include/linux/iio/iio.h | 28 ---------------------------- include/linux/iio/types.h | 28 ++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 33 deletions(-) diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 069defcc6d9b..ec98790e2a28 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -664,9 +664,8 @@ int iio_convert_raw_to_processed(struct iio_channel *chan, int raw, } EXPORT_SYMBOL_GPL(iio_convert_raw_to_processed); -static int iio_read_channel_attribute(struct iio_channel *chan, - int *val, int *val2, - enum iio_chan_info_enum attribute) +int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2, + enum iio_chan_info_enum attribute) { int ret; @@ -682,6 +681,7 @@ static int iio_read_channel_attribute(struct iio_channel *chan, return ret; } +EXPORT_SYMBOL_GPL(iio_read_channel_attribute); int iio_read_channel_offset(struct iio_channel *chan, int *val, int *val2) { @@ -850,7 +850,8 @@ static int iio_channel_write(struct iio_channel *chan, int val, int val2, chan->channel, val, val2, info); } -int iio_write_channel_raw(struct iio_channel *chan, int val) +int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2, + enum iio_chan_info_enum attribute) { int ret; @@ -860,12 +861,18 @@ int iio_write_channel_raw(struct iio_channel *chan, int val) goto err_unlock; } - ret = iio_channel_write(chan, val, 0, IIO_CHAN_INFO_RAW); + ret = iio_channel_write(chan, val, val2, attribute); err_unlock: mutex_unlock(&chan->indio_dev->info_exist_lock); return ret; } +EXPORT_SYMBOL_GPL(iio_write_channel_attribute); + +int iio_write_channel_raw(struct iio_channel *chan, int val) +{ + return iio_write_channel_attribute(chan, val, 0, IIO_CHAN_INFO_RAW); +} EXPORT_SYMBOL_GPL(iio_write_channel_raw); unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan) diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 5e347a9805fd..2017f35db17c 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -215,6 +215,32 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val); */ int iio_read_channel_processed(struct iio_channel *chan, int *val); +/** + * iio_write_channel_attribute() - Write values to the device attribute. + * @chan: The channel being queried. + * @val: Value being written. + * @val2: Value being written.val2 use depends on attribute type. + * @attribute: info attribute to be read. + * + * Returns an error code or 0. + */ +int iio_write_channel_attribute(struct iio_channel *chan, int val, + int val2, enum iio_chan_info_enum attribute); + +/** + * iio_read_channel_attribute() - Read values from the device attribute. + * @chan: The channel being queried. + * @val: Value being written. + * @val2: Value being written.Val2 use depends on attribute type. + * @attribute: info attribute to be written. + * + * Returns an error code if failed. Else returns a description of what is in val + * and val2, such as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val + * + val2/1e6 + */ +int iio_read_channel_attribute(struct iio_channel *chan, int *val, + int *val2, enum iio_chan_info_enum attribute); + /** * iio_write_channel_raw() - write to a given channel * @chan: The channel being queried. diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 20b61347ea58..f12a61be1ede 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -20,34 +20,6 @@ * Currently assumes nano seconds. */ -enum iio_chan_info_enum { - IIO_CHAN_INFO_RAW = 0, - IIO_CHAN_INFO_PROCESSED, - IIO_CHAN_INFO_SCALE, - IIO_CHAN_INFO_OFFSET, - IIO_CHAN_INFO_CALIBSCALE, - IIO_CHAN_INFO_CALIBBIAS, - IIO_CHAN_INFO_PEAK, - IIO_CHAN_INFO_PEAK_SCALE, - IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW, - IIO_CHAN_INFO_AVERAGE_RAW, - IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY, - IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY, - IIO_CHAN_INFO_SAMP_FREQ, - IIO_CHAN_INFO_FREQUENCY, - IIO_CHAN_INFO_PHASE, - IIO_CHAN_INFO_HARDWAREGAIN, - IIO_CHAN_INFO_HYSTERESIS, - IIO_CHAN_INFO_INT_TIME, - IIO_CHAN_INFO_ENABLE, - IIO_CHAN_INFO_CALIBHEIGHT, - IIO_CHAN_INFO_CALIBWEIGHT, - IIO_CHAN_INFO_DEBOUNCE_COUNT, - IIO_CHAN_INFO_DEBOUNCE_TIME, - IIO_CHAN_INFO_CALIBEMISSIVITY, - IIO_CHAN_INFO_OVERSAMPLING_RATIO, -}; - enum iio_shared_by { IIO_SEPARATE, IIO_SHARED_BY_TYPE, diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 2aa7b6384d64..6eb3d683ef62 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -34,4 +34,32 @@ enum iio_available_type { IIO_AVAIL_RANGE, }; +enum iio_chan_info_enum { + IIO_CHAN_INFO_RAW = 0, + IIO_CHAN_INFO_PROCESSED, + IIO_CHAN_INFO_SCALE, + IIO_CHAN_INFO_OFFSET, + IIO_CHAN_INFO_CALIBSCALE, + IIO_CHAN_INFO_CALIBBIAS, + IIO_CHAN_INFO_PEAK, + IIO_CHAN_INFO_PEAK_SCALE, + IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW, + IIO_CHAN_INFO_AVERAGE_RAW, + IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY, + IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY, + IIO_CHAN_INFO_SAMP_FREQ, + IIO_CHAN_INFO_FREQUENCY, + IIO_CHAN_INFO_PHASE, + IIO_CHAN_INFO_HARDWAREGAIN, + IIO_CHAN_INFO_HYSTERESIS, + IIO_CHAN_INFO_INT_TIME, + IIO_CHAN_INFO_ENABLE, + IIO_CHAN_INFO_CALIBHEIGHT, + IIO_CHAN_INFO_CALIBWEIGHT, + IIO_CHAN_INFO_DEBOUNCE_COUNT, + IIO_CHAN_INFO_DEBOUNCE_TIME, + IIO_CHAN_INFO_CALIBEMISSIVITY, + IIO_CHAN_INFO_OVERSAMPLING_RATIO, +}; + #endif /* _IIO_TYPES_H_ */ -- 2.15.1

1 0

[alsa-devel] [PATCH v4 00/12] Add STM32 DFSDM support
by Arnaud Pouliquen 10 Jan '18

10 Jan '18

Hello, Here is a new version of the DFSDM proposed. Context reminder: ----------------- DFSDM peripheral is a peripheral that allows to connect some sigma delta ADCs or PDM microphones via a SPI or Manchester bus. DFSDM integrates digital filters to offer up to 24 bits final resolution. In term of SW architecture. 2 use-cases have to be supported: 1) Sigma delta ADC conversion through IIO framework. Sigma delta ADC is handled by generic sigma delta modulator driver. DFSDM peripheral is binded to a SD modulator ADC using the IIO HW consumer interface. Please notice that IIO HW consumer interface has be proposed by Lars, but is part of this patchset with Lars's agreement. User interface is IIO one. Notice that this patch-set propose only a raw conversion, to simplify review. Buffer and trigger management will be added in next patch-sets. 2) PDM microphone record through ALSA framework. PDM microphone is handled by ASOC Generic DMIC codec driver. ADFSDM ASOC DAI driver is binded to IIO driver using the IIO consumer interface ADFSDM ASOC DAI driver is binded to a PDM microphone ASOC component using ASOC Of_graph. User interface is ALSA one. As IIO DMA management is not adapted to an audio realtime stream. A specific DMA management has been implemented in IIO driver for audio purposes. History of the versions: ----------------------- V3: Implementation with DMA support in IIO instead of handling it in ASOC. - New patches to support ASoC DMA codec in DT - ASoC: Add Bindins for DMIC codec driver. - ASoC: codec: add DT support in dmic codec. - New patches to allow in-kernel set of IIO buffer size and watermark - IIO: consumer: allow to set buffer sizes. - IIO DFSDM drivers - Split audio and ADC support in 2 drivers. - Implement DMA cyclic mode. - Add SPI bus Trigger for buffer management. - IIO sigma delta adc drivers - Suppress "simple and rename driver. - ASoC driver - Suppress DMA engine. - Suppress copy ops. - Use IIO consmumer interface to enable/Disable DFSDM. V2: Patch-set associated to this RFC proposes an implementation of the DFSDM features shared between ASoC and IIO frameworks. Patch-set is only a Skeleton of the drivers, so a base to discuss and validate a design. It contains minimum code to allow probing (with DT) and to expose the ASoC and IIO ABI. Hope that is sufficent in a first step to allow to focus on APIs. In this patch-set there are two new APIs used: - IIO in-kern API: based on hw_customer API proposed by Lars - ASOC <-> IIO API inspired by API defined for hdmi-codec for ASoC/DRM interconnect. API is dedicated to DFSDM only. Notice also that this design is based on following assumption: - Audio stream ABI interface is ASoC, no access to data through IIO ABI for PDM. - ASoC DMA should be used for audio transfer as designed for real time stream. - Need some runtime parameters exchange between ASoC and IIO due to the correlation between the sample frequency, the DFSDM decimation factor and the associated scaling. - "ASoC: dmaengine_pcm: add copy support" patch: I added a patch in ASoC that allows to implement a copy function to process data after DMA transfer. Requested, as DFSDM samples captured contain channel ID on 8-LSB bits and need also a potential rescale to present DAT on 24-bits. - "IIO: ADC: add sigma delta modulator support" patch: Simple dummy driver created to support external Sigma delta modulator. It is binded to DFSDM driver through hw_customer API. Regards, Arnaud Arnaud Pouliquen (11): docs: driver-api: add iio hw consumer section IIO: hw_consumer: add devm_iio_hw_consumer_alloc IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM core support IIO: ADC: add STM32 DFSDM sigma delta ADC support IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support Lars-Peter Clausen (1): iio: Add hardware consumer buffer support .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 22 + .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 127 ++ .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 63 + Documentation/driver-api/iio/hw-consumer.rst | 50 + Documentation/driver-api/iio/index.rst | 1 + drivers/iio/adc/Kconfig | 37 + drivers/iio/adc/Makefile | 3 + drivers/iio/adc/sd_adc_modulator.c | 82 ++ drivers/iio/adc/stm32-dfsdm-adc.c | 1250 ++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 318 +++++ drivers/iio/adc/stm32-dfsdm.h | 319 +++++ drivers/iio/buffer/Kconfig | 10 + drivers/iio/buffer/Makefile | 1 + drivers/iio/buffer/industrialio-buffer-cb.c | 11 + drivers/iio/buffer/industrialio-hw-consumer.c | 248 ++++ include/linux/iio/adc/stm32-dfsdm-adc.h | 27 + include/linux/iio/consumer.h | 11 + include/linux/iio/hw-consumer.h | 22 + sound/soc/stm/Kconfig | 11 + sound/soc/stm/Makefile | 3 + sound/soc/stm/stm32_adfsdm.c | 388 ++++++ 22 files changed, 3017 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 Documentation/driver-api/iio/hw-consumer.rst create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h create mode 100644 include/linux/iio/hw-consumer.h create mode 100644 sound/soc/stm/stm32_adfsdm.c -- 2.7.4

4 28