January 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read()
by Dan Carpenter 16 Jan '18

16 Jan '18

The loop timeout doesn't work because it's a post op and ends with "tmo" set to -1. I changed it from a post-op to a pre-op and I changed the initial the starting value from 5 to 6 so we still iterate 5 times. I left the other as it was because it's a large number. Fixes: b3c70c9ea62a ("ASoC: Alchemy AC97C/I2SC audio support") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/sound/soc/au1x/ac97c.c b/sound/soc/au1x/ac97c.c index 29a97d52e8ad..66d6c52e7761 100644 --- a/sound/soc/au1x/ac97c.c +++ b/sound/soc/au1x/ac97c.c @@ -91,8 +91,8 @@ static unsigned short au1xac97c_ac97_read(struct snd_ac97 *ac97, do { mutex_lock(&ctx->lock); - tmo = 5; - while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--) + tmo = 6; + while ((RD(ctx, AC97_STATUS) & STAT_CP) && --tmo) udelay(21); /* wait an ac97 frame time */ if (!tmo) { pr_debug("ac97rd timeout #1\n"); @@ -105,7 +105,7 @@ static unsigned short au1xac97c_ac97_read(struct snd_ac97 *ac97, * poll, Forrest, poll... */ tmo = 0x10000; - while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--) + while ((RD(ctx, AC97_STATUS) & STAT_CP) && --tmo) asm volatile ("nop"); data = RD(ctx, AC97_CMDRESP);

3 3

[alsa-devel] Applied "IIO: ADC: stm32-dfsdm: code optimization" to the asoc tree
by Mark Brown 16 Jan '18

16 Jan '18

The patch IIO: ADC: stm32-dfsdm: code optimization has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From abaca806fd13afd069e04e883de8ec75924b0598 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Date: Mon, 15 Jan 2018 09:57:39 +0100 Subject: [PATCH] IIO: ADC: stm32-dfsdm: code optimization Use of_device_get_match_data to optimize the source code. No check is needed on dev_data as match table is defined in driver. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- drivers/iio/adc/stm32-dfsdm-adc.c | 9 +-------- drivers/iio/adc/stm32-dfsdm-core.c | 8 +------- 2 files changed, 2 insertions(+), 15 deletions(-) diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 5e871404f565..3fe9b34ac6af 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -1087,18 +1087,11 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; const struct stm32_dfsdm_dev_data *dev_data; struct iio_dev *iio; - const struct of_device_id *of_id; char *name; int ret, irq, val; - of_id = of_match_node(stm32_dfsdm_adc_match, np); - if (!of_id->data) { - dev_err(&pdev->dev, "Data associated to device is missing\n"); - return -EINVAL; - } - - dev_data = (const struct stm32_dfsdm_dev_data *)of_id->data; + dev_data = of_device_get_match_data(dev); iio = devm_iio_device_alloc(dev, sizeof(*adc)); if (!iio) { dev_err(dev, "%s: Failed to allocate IIO\n", __func__); diff --git a/drivers/iio/adc/stm32-dfsdm-core.c b/drivers/iio/adc/stm32-dfsdm-core.c index 6cd655f8239b..6290332cfd3f 100644 --- a/drivers/iio/adc/stm32-dfsdm-core.c +++ b/drivers/iio/adc/stm32-dfsdm-core.c @@ -242,7 +242,6 @@ MODULE_DEVICE_TABLE(of, stm32_dfsdm_of_match); static int stm32_dfsdm_probe(struct platform_device *pdev) { struct dfsdm_priv *priv; - const struct of_device_id *of_id; const struct stm32_dfsdm_dev_data *dev_data; struct stm32_dfsdm *dfsdm; int ret; @@ -253,13 +252,8 @@ static int stm32_dfsdm_probe(struct platform_device *pdev) priv->pdev = pdev; - of_id = of_match_node(stm32_dfsdm_of_match, pdev->dev.of_node); - if (!of_id->data) { - dev_err(&pdev->dev, "Data associated to device is missing\n"); - return -EINVAL; - } + dev_data = of_device_get_match_data(&pdev->dev); - dev_data = (const struct stm32_dfsdm_dev_data *)of_id->data; dfsdm = &priv->dfsdm; dfsdm->fl_list = devm_kcalloc(&pdev->dev, dev_data->num_filters, sizeof(*dfsdm->fl_list), GFP_KERNEL); -- 2.15.1

1 0

[alsa-devel] Applied "IIO: ADC: stm32-dfsdm: fix static check warning" to the asoc tree
by Mark Brown 16 Jan '18

16 Jan '18

The patch IIO: ADC: stm32-dfsdm: fix static check warning has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 1175d0f9f4031ce02845f6f843f58a9caaee7817 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Date: Mon, 15 Jan 2018 10:00:26 +0100 Subject: [PATCH] IIO: ADC: stm32-dfsdm: fix static check warning iio_priv does not return an error pointer, so check is not valid. Patch suppresses it. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- drivers/iio/adc/stm32-dfsdm-adc.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 3fe9b34ac6af..daa026d6a94f 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -1099,10 +1099,6 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev) } adc = iio_priv(iio); - if (IS_ERR(adc)) { - dev_err(dev, "%s: Failed to allocate ADC\n", __func__); - return PTR_ERR(adc); - } adc->dfsdm = dev_get_drvdata(dev->parent); iio->dev.parent = dev; -- 2.15.1

1 0

[alsa-devel] ASoC: fix regression by adding back .read/.write
by Kuninori Morimoto 16 Jan '18

16 Jan '18

Hi Mark As Tony mentioned in "PM regression in next" mail thread, below drivers need .read/.write back on codec driver. twl4030/twl6040 side will be fixed by Tony's patch, thus, I post for remains. sound/soc/codecs/cx20442.c sound/soc/codecs/tlv320dac33.c sound/soc/codecs/twl4030.c sound/soc/codecs/twl6040.c sound/soc/codecs/uda1380.c Because of this, my posted codec/platform conversion patch-set will have conflict on above drivers. I'm happy to post v2 patch for these when you accepted that series. This .read/.write callback is implemented in Codec driver side only. We need it in Component side too. Last patch is for it. Best regards --- Kuninori Morimoto

2 8

[alsa-devel] [PATCH v2] ALSA: pcm: Fix trailing semicolon
by Luis de Bethencourt 16 Jan '18

16 Jan '18

The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg(a)kernel.org> --- Changes from v1: - Fix commit message sound/core/pcm_native.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 3f13e8da0812..51104df924e1 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3446,7 +3446,7 @@ EXPORT_SYMBOL_GPL(snd_pcm_lib_default_mmap); int snd_pcm_lib_mmap_iomem(struct snd_pcm_substream *substream, struct vm_area_struct *area) { - struct snd_pcm_runtime *runtime = substream->runtime;; + struct snd_pcm_runtime *runtime = substream->runtime; area->vm_page_prot = pgprot_noncached(area->vm_page_prot); return vm_iomap_memory(area, runtime->dma_addr, runtime->dma_bytes); -- 2.15.1

2 1

[alsa-devel] [PATCH] ALSA: pcm: Fix trailing semicolon
by Luis de Bethencourt 16 Jan '18

16 Jan '18

From: Ubuntu <luisbg(a)kernel.org> The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg(a)kernel.org> --- Hi, After fixing the same thing in drivers/staging/rtl8723bs/, Joe Perches suggested I fix it treewide [0]. Best regards Luis [0] http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-Janu… [1] http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2018-Janu… sound/core/pcm_native.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 3f13e8da0812..51104df924e1 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3446,7 +3446,7 @@ EXPORT_SYMBOL_GPL(snd_pcm_lib_default_mmap); int snd_pcm_lib_mmap_iomem(struct snd_pcm_substream *substream, struct vm_area_struct *area) { - struct snd_pcm_runtime *runtime = substream->runtime;; + struct snd_pcm_runtime *runtime = substream->runtime; area->vm_page_prot = pgprot_noncached(area->vm_page_prot); return vm_iomap_memory(area, runtime->dma_addr, runtime->dma_bytes); -- 2.15.1

2 2

[alsa-devel] Sound Blaster Z - Sound from front case port, but not back
by Frederique 16 Jan '18

16 Jan '18

I am using a Sound Blaster Z on Debian. The back microphone port works as expected. I can only manage to get audio out of the card by connecting the case audio header to the sound card, and then using the case front audio port and having the headphone port option enabled in alsamixer. It is an inconvenience as now I have to use an extension cable to route things around (microphone cable at the back, audio cable to the front), having a headset. Does anyone know a solution to this? How hard can it be to make the back audio part do the same thing as the front audio port?

1 0

[alsa-devel] [PATCH v7 00/17] Add support for Cirrus Logic CS47L35/L85/L90/L91 codecs
by Richard Fitzgerald 16 Jan '18

16 Jan '18

IMPORTANT: These patches have to be submitted as an atomic block because of build interdependencies so you'll need to agree who is going to take them all through a branch. The Cirrus Logic CS47L35, CS47L85, CS47L90/91 codecs are complex audio SoC devices. In addition to the core audio capability they have onboard GPIO, regulators, DSPs and interrupt controller and a large register map space accessed over SPI or I2C. This family of codecs is based around common IP blocks and they are managed by a set of common drivers referred to as "Madera". Patches still waiting for review/ack: #7-8 regulator #9 irqchip #14-17 ASoC Richard Fitzgerald (17): mfd: madera: Add register definitions for Cirrus Logic Madera codecs mfd: madera: Add DT bindings for Cirrus Logic Madera codecs mfd: madera: Add common support for Cirrus Logic Madera codecs mfd: madera: Register map tables for Cirrus Logic CS47L35 mfd: madera: Register map tables for Cirrus Logic CS47L85 mfd: madera: Register map tables for Cirrus Logic CS47L90/91 regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs irqchip: Add driver for Cirrus Logic Madera codecs pinctrl: madera: Add DT bindings for Cirrus Logic Madera codecs pinctrl: madera: Add driver for Cirrus Logic Madera codecs gpio: madera: Support Cirrus Logic Madera class codecs ASoC: madera: Add DT bindings for Cirrus Logic Madera codecs ASoC: madera: Add common support for Cirrus Logic Madera codecs ASoC: cs47l35: Add codec driver for Cirrus Logic CS47L35 ASoC: cs47l85: Add codec driver for Cirrus Logic CS47L85 ASoC: cs47l90: Add codec driver for Cirrus Logic CS47L90 Documentation/devicetree/bindings/mfd/madera.txt | 102 + .../bindings/pinctrl/cirrus,madera-pinctrl.txt | 99 + .../bindings/regulator/arizona-regulator.txt | 3 +- Documentation/devicetree/bindings/sound/madera.txt | 67 + MAINTAINERS | 23 + drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-madera.c | 196 + drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-madera.c | 301 ++ drivers/mfd/Kconfig | 48 + drivers/mfd/Makefile | 13 + drivers/mfd/cs47l35-tables.c | 1610 +++++++ drivers/mfd/cs47l85-tables.c | 3010 +++++++++++++ drivers/mfd/cs47l90-tables.c | 2675 ++++++++++++ drivers/mfd/madera-core.c | 599 +++ drivers/mfd/madera-i2c.c | 140 + drivers/mfd/madera-spi.c | 139 + drivers/mfd/madera.h | 44 + drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/cirrus/Kconfig | 15 + drivers/pinctrl/cirrus/Makefile | 11 + drivers/pinctrl/cirrus/pinctrl-cs47l35.c | 46 + drivers/pinctrl/cirrus/pinctrl-cs47l85.c | 60 + drivers/pinctrl/cirrus/pinctrl-cs47l90.c | 58 + drivers/pinctrl/cirrus/pinctrl-madera.c | 1074 +++++ drivers/pinctrl/cirrus/pinctrl-madera.h | 40 + drivers/regulator/Kconfig | 15 +- drivers/regulator/arizona-ldo1.c | 82 +- drivers/regulator/arizona-micsupp.c | 71 +- include/dt-bindings/sound/madera.h | 27 + include/linux/irqchip/irq-madera-pdata.h | 23 + include/linux/irqchip/irq-madera.h | 98 + include/linux/mfd/madera/core.h | 196 + include/linux/mfd/madera/pdata.h | 61 + include/linux/mfd/madera/registers.h | 3916 +++++++++++++++++ include/sound/madera-pdata.h | 61 + sound/soc/codecs/Kconfig | 23 + sound/soc/codecs/Makefile | 8 + sound/soc/codecs/cs47l35.c | 1671 ++++++++ sound/soc/codecs/cs47l85.c | 2677 ++++++++++++ sound/soc/codecs/cs47l90.c | 2651 ++++++++++++ sound/soc/codecs/madera.c | 4439 ++++++++++++++++++++ sound/soc/codecs/madera.h | 470 +++ 46 files changed, 26865 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/sound/madera.txt create mode 100644 drivers/gpio/gpio-madera.c create mode 100644 drivers/irqchip/irq-madera.c create mode 100644 drivers/mfd/cs47l35-tables.c create mode 100644 drivers/mfd/cs47l85-tables.c create mode 100644 drivers/mfd/cs47l90-tables.c create mode 100644 drivers/mfd/madera-core.c create mode 100644 drivers/mfd/madera-i2c.c create mode 100644 drivers/mfd/madera-spi.c create mode 100644 drivers/mfd/madera.h create mode 100644 drivers/pinctrl/cirrus/Kconfig create mode 100644 drivers/pinctrl/cirrus/Makefile create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l35.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l85.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l90.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.h create mode 100644 include/dt-bindings/sound/madera.h create mode 100644 include/linux/irqchip/irq-madera-pdata.h create mode 100644 include/linux/irqchip/irq-madera.h create mode 100644 include/linux/mfd/madera/core.h create mode 100644 include/linux/mfd/madera/pdata.h create mode 100644 include/linux/mfd/madera/registers.h create mode 100644 include/sound/madera-pdata.h create mode 100644 sound/soc/codecs/cs47l35.c create mode 100644 sound/soc/codecs/cs47l85.c create mode 100644 sound/soc/codecs/cs47l90.c create mode 100644 sound/soc/codecs/madera.c create mode 100644 sound/soc/codecs/madera.h -- 2.11.0

3 19

[alsa-devel] [PATCH] sound/pci/hda: depends on instead of select for INPUT
by Randy Dunlap 15 Jan '18

15 Jan '18

From: Randy Dunlap <rdunlap(a)infradead.org> Drivers should not 'select' a subsystem. Instead they should depend on it. If the subsystem is disabled, the user probably did that for a purpose and one driver shouldn't be changing that. This also makes all sound/ drivers consistent w.r.t depending on INPUT instead of selecting it. Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org (moderated for non-subscribers) --- sound/pci/hda/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- lnx-415-rc8.orig/sound/pci/hda/Kconfig +++ lnx-415-rc8/sound/pci/hda/Kconfig @@ -87,8 +87,8 @@ config SND_HDA_PATCH_LOADER config SND_HDA_CODEC_REALTEK tristate "Build Realtek HD-audio codec support" + depends on INPUT select SND_HDA_GENERIC - select INPUT help Say Y or M here to include Realtek HD-audio codec support in snd-hda-intel driver, such as ALC880.

2 4

[alsa-devel] [PATCH] ALSA: seq: Process queue tempo/ppq change in a shot
by Takashi Iwai 15 Jan '18

15 Jan '18

The SNDRV_SEQ_IOCTL_SET_QUEUE_TEMPO ioctl sets the tempo and the ppq in a single call, while the current implementation updates each value one by one. This is a bit racy, and also suboptimal from the performance POV, as each call does re-acquire the lock and invokes the update of ALSA timer resolution. This patch reorganizes the code slightly so that we change both the tempo and the ppq in a shot. The skew value can be put into the same lock, but this is rather a rarely used feature and completely independent from the temp/ppq (it's evaluated only in the interrupt), so it's left as it was. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/seq/seq_queue.c | 4 +--- sound/core/seq/seq_timer.c | 13 ++++++++----- sound/core/seq/seq_timer.h | 2 +- 3 files changed, 10 insertions(+), 9 deletions(-) diff --git a/sound/core/seq/seq_queue.c b/sound/core/seq/seq_queue.c index 79e0c5604ef8..0428e9061b47 100644 --- a/sound/core/seq/seq_queue.c +++ b/sound/core/seq/seq_queue.c @@ -497,9 +497,7 @@ int snd_seq_queue_timer_set_tempo(int queueid, int client, return -EPERM; } - result = snd_seq_timer_set_tempo(q->timer, info->tempo); - if (result >= 0) - result = snd_seq_timer_set_ppq(q->timer, info->ppq); + result = snd_seq_timer_set_tempo_ppq(q->timer, info->tempo, info->ppq); if (result >= 0 && info->skew_base > 0) result = snd_seq_timer_set_skew(q->timer, info->skew_value, info->skew_base); diff --git a/sound/core/seq/seq_timer.c b/sound/core/seq/seq_timer.c index b80985fbc334..23167578231f 100644 --- a/sound/core/seq/seq_timer.c +++ b/sound/core/seq/seq_timer.c @@ -191,14 +191,15 @@ int snd_seq_timer_set_tempo(struct snd_seq_timer * tmr, int tempo) return 0; } -/* set current ppq */ -int snd_seq_timer_set_ppq(struct snd_seq_timer * tmr, int ppq) +/* set current tempo and ppq in a shot */ +int snd_seq_timer_set_tempo_ppq(struct snd_seq_timer *tmr, int tempo, int ppq) { + int changed; unsigned long flags; if (snd_BUG_ON(!tmr)) return -EINVAL; - if (ppq <= 0) + if (tempo <= 0 || ppq <= 0) return -EINVAL; spin_lock_irqsave(&tmr->lock, flags); if (tmr->running && (ppq != tmr->ppq)) { @@ -208,9 +209,11 @@ int snd_seq_timer_set_ppq(struct snd_seq_timer * tmr, int ppq) pr_debug("ALSA: seq: cannot change ppq of a running timer\n"); return -EBUSY; } - + changed = (tempo != tmr->tempo) || (ppq != tmr->ppq); + tmr->tempo = tempo; tmr->ppq = ppq; - snd_seq_timer_set_tick_resolution(tmr); + if (changed) + snd_seq_timer_set_tick_resolution(tmr); spin_unlock_irqrestore(&tmr->lock, flags); return 0; } diff --git a/sound/core/seq/seq_timer.h b/sound/core/seq/seq_timer.h index 9506b661fe5b..62f390671096 100644 --- a/sound/core/seq/seq_timer.h +++ b/sound/core/seq/seq_timer.h @@ -131,7 +131,7 @@ int snd_seq_timer_stop(struct snd_seq_timer *tmr); int snd_seq_timer_start(struct snd_seq_timer *tmr); int snd_seq_timer_continue(struct snd_seq_timer *tmr); int snd_seq_timer_set_tempo(struct snd_seq_timer *tmr, int tempo); -int snd_seq_timer_set_ppq(struct snd_seq_timer *tmr, int ppq); +int snd_seq_timer_set_tempo_ppq(struct snd_seq_timer *tmr, int tempo, int ppq); int snd_seq_timer_set_position_tick(struct snd_seq_timer *tmr, snd_seq_tick_time_t position); int snd_seq_timer_set_position_time(struct snd_seq_timer *tmr, snd_seq_real_time_t position); int snd_seq_timer_set_skew(struct snd_seq_timer *tmr, unsigned int skew, unsigned int base); -- 2.15.1

1 0