August 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 0/6] ASoC: make snd_pcm_hardware const
by Bhumika Goyal 18 Aug '17

18 Aug '17

Make these const. Done using Coccinelle Bhumika Goyal (6): ASoC: fsl: make snd_pcm_hardware const ASoC: Intel: Atom: make snd_pcm_hardware const ASoC: Intel: Skylake: make snd_pcm_hardware const ASoC: kirkwood: make snd_pcm_hardware const ASoC: sh: make snd_pcm_hardware const ASoC: qcom: make snd_pcm_hardware const sound/soc/fsl/fsl_asrc_dma.c | 2 +- sound/soc/fsl/imx-pcm-fiq.c | 2 +- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +- sound/soc/intel/skylake/skl-pcm.c | 2 +- sound/soc/kirkwood/kirkwood-dma.c | 2 +- sound/soc/qcom/lpass-platform.c | 2 +- sound/soc/sh/dma-sh7760.c | 2 +- sound/soc/sh/fsi.c | 2 +- sound/soc/sh/rcar/core.c | 2 +- sound/soc/sh/siu_dai.c | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-) -- 1.9.1

3 13

[alsa-devel] [PATCH] ALSA: usb-audio: don't retry snd_usb_ctl_msg after timeout
by Stephen Barber 18 Aug '17

18 Aug '17

A few calls to snd_usb_ctl_msg wrap the function in a retry loop. In the worst case, the timeout for snd_usb_ctl_msg is 5 seconds, which when retried 10 times (for example, if a device is removed) could cause a probe to hang for ~50 seconds. Example stack trace from 3.14 which triggered a hung task timeout: Call Trace: [<ffffffffa2c1f720>] ? inet6_set_link_af.part.35+0x12/0x12 [<ffffffffa2c20309>] schedule+0x6e/0x70 [<ffffffffa2c1f81c>] schedule_timeout+0xfc/0x13c [<ffffffffa2667bbc>] ? rcu_read_unlock_sched_notrace+0x17/0x17 [<ffffffffa2c20d68>] __wait_for_common+0x153/0x190 [<ffffffffa2c20d68>] ? __wait_for_common+0x153/0x190 [<ffffffffa26890e5>] ? wake_up_state+0x12/0x12 [<ffffffffa2c20e0e>] wait_for_completion_timeout+0x1d/0x1f [<ffffffffa2a07c70>] usb_start_wait_urb+0x93/0xf1 [<ffffffffa2a07daf>] usb_control_msg+0xe1/0x11d [<ffffffffc02cd254>] snd_usb_ctl_msg+0x9c/0xf1 [snd_usb_audio] [<ffffffffc02ce191>] snd_usb_mixer_set_ctl_value+0x124/0xab1 [snd_usb_audio] [<ffffffffc02ce230>] snd_usb_mixer_set_ctl_value+0x1c3/0xab1 [snd_usb_audio] [<ffffffffc02ce58e>] snd_usb_mixer_set_ctl_value+0x521/0xab1 [snd_usb_audio] [<ffffffffc02cee88>] snd_usb_mixer_add_control+0x36a/0x1264 [snd_usb_audio] [<ffffffffc02cf323>] snd_usb_mixer_add_control+0x805/0x1264 [snd_usb_audio] [<ffffffffa2a06e11>] ? usb_free_urb+0x1a/0x1c [<ffffffffc02cfcf7>] snd_usb_mixer_add_control+0x11d9/0x1264 [snd_usb_audio] [<ffffffffc02d000f>] snd_usb_create_mixer+0xbc/0x286 [snd_usb_audio] [<ffffffffc02cac18>] 0xffffffffc02cac17 [<ffffffffa2a0aaf1>] usb_probe_interface+0x17c/0x21c [<ffffffffa29a65bc>] driver_probe_device+0xae/0x1fa [<ffffffffa29a6767>] __device_attach_driver+0x5f/0x66 [<ffffffffa29a6708>] ? driver_probe_device+0x1fa/0x1fa [<ffffffffa29a4a60>] bus_for_each_drv+0x87/0xaa [<ffffffffa29a688a>] __device_attach+0x9d/0x101 [<ffffffffa29a6913>] device_initial_probe+0x13/0x15 [<ffffffffa29a5ae6>] bus_probe_device+0x33/0x96 [<ffffffffa29a3d19>] device_add+0x328/0x547 [<ffffffffa2a09355>] usb_set_configuration+0x624/0x674 [<ffffffffa2a11949>] generic_probe+0x45/0x77 [<ffffffffa2a0a962>] usb_probe_device+0x2d/0x40 [<ffffffffa29a65bc>] driver_probe_device+0xae/0x1fa [<ffffffffa29a6767>] __device_attach_driver+0x5f/0x66 [<ffffffffa29a6708>] ? driver_probe_device+0x1fa/0x1fa [<ffffffffa29a4a60>] bus_for_each_drv+0x87/0xaa [<ffffffffa29a688a>] __device_attach+0x9d/0x101 [<ffffffffa29a6913>] device_initial_probe+0x13/0x15 [<ffffffffa29a5ae6>] bus_probe_device+0x33/0x96 [<ffffffffa29a3d19>] device_add+0x328/0x547 [<ffffffffa29030bc>] ? add_device_randomness+0x111/0x130 [<ffffffffa2a00967>] usb_new_device+0x2a2/0x3c0 [<ffffffffa2a02ddc>] hub_thread+0xa3d/0xeed [<ffffffffa2c2010d>] ? __schedule+0x41e/0x5ac [<ffffffffa26957ce>] ? finish_wait+0x62/0x62 [<ffffffffa2a0239f>] ? usb_reset_device+0x16a/0x16a [<ffffffffa267b255>] kthread+0x108/0x110 [<ffffffffa267b14d>] ? __kthread_parkme+0x67/0x67 [<ffffffffa2c23b2c>] ret_from_fork+0x7c/0xb0 [<ffffffffa267b14d>] ? __kthread_parkme+0x67/0x67 Signed-off-by: Stephen Barber <smbarber(a)chromium.org> --- sound/usb/mixer.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 082736c539bc..253fc946db29 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -318,12 +318,15 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, while (timeout-- > 0) { idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8); - if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request, - USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, - validx, idx, buf, val_len) >= val_len) { + err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request, + USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, + validx, idx, buf, val_len); + if (err >= val_len) { *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len)); err = 0; goto out; + } else if (err == -ETIMEDOUT) { + goto out; } } usb_audio_dbg(chip, @@ -483,12 +486,15 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, while (timeout-- > 0) { idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8); - if (snd_usb_ctl_msg(chip->dev, - usb_sndctrlpipe(chip->dev, 0), request, - USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, - validx, idx, buf, val_len) >= 0) { + err = snd_usb_ctl_msg(chip->dev, + usb_sndctrlpipe(chip->dev, 0), request, + USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, + validx, idx, buf, val_len); + if (err >= 0) { err = 0; goto out; + } else if (err == -ETIMEDOUT) { + goto out; } } usb_audio_dbg(chip, "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n", -- 2.14.1.480.gb18f417b89-goog

2 1

[alsa-devel] Digigram VX222e not seen as card
by Sam Mulvey 18 Aug '17

18 Aug '17

A radio station I'm working on has a machine with a Digigram VX222e connected to it. According to the Digigram site and the ALSA website, the sound card is supported by ALSA. Unfortunately, it doesn't appear to be detected as a sound card. Reading online, it requires some firmware, but it appears that my system has the proper firmware installed. The VX222e is a PCIe card, but it appears to be PCI on the card with a PCIe to PCI bridge. According to Digigram's support site, they made a hardware change in March of 2017, and I suspect that this might be the problem. I'm guessing it might be as simple enough as an ID match that I need to add to a module, but I've never worked with the card before, and I'm a little stuck. There's nothing regarding the card in dmesg, but it is visible in lspci: 03:00.0 PCI bridge: PLX Technology, Inc. PEX 8111 PCI Express-to-PCI Bridge (rev 21) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 3 NUMA node: 0 Bus: primary=03, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000e000-0000efff [size=4K] Memory behind bridge: fde00000-fdefffff [size=1M] Prefetchable memory behind bridge: fdd00000-fddfffff [size=1M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- AttnBtn- AttnInd- PwrInd- RBE- SlotPowerLimit 25.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Power Budgeting <?> Kernel modules: shpchp 04:04.0 Multimedia audio controller: PLX Technology, Inc. PCI9056 32-bit 66MHz PCI <-> IOBus Bridge Subsystem: Digigram Device ba41 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 3 NUMA node: 0 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=512] Region 1: I/O ports at ec00 [size=256] Region 2: I/O ports at ef00 [size=128] Capabilities: [40] Power Management version 0 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] #00 [0000] Capabilities: [4c] Vital Product Data pcilib: sysfs_read_vpd: read failed: Input/output error I'm also documenting what I've got and what I've tried here: https://vis.nu/blog/digigram_vx222e_isn_t_seen_in_arch_linux Any pointers would be helpful. Thanks! -Sam

1 0

[alsa-devel] [PATCH] ASoC: mediatek: Correct the interrupt property
by Ryder Lee 18 Aug '17

18 Aug '17

This patch update interrupt property since we only use ASYS IRQ in the driver, and this may confuse people. Signed-off-by: Ryder Lee <ryder.lee(a)mediatek.com> CC: Garlic Tseng <garlic.tseng(a)mediatek.com> --- Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 9800a56..9d7b6dc 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -3,7 +3,7 @@ Mediatek AFE PCM controller for mt2701 Required properties: - compatible = "mediatek,mt2701-audio"; - reg: register location and size -- interrupts: Should contain AFE interrupt +- interrupts: Should contain ASYS interrupt - power-domains: should define the power domain - clock-names: should have these clock names: "infra_sys_audio_clk", @@ -57,8 +57,7 @@ Example: compatible = "mediatek,mt2701-audio"; reg = <0 0x11220000 0 0x2000>, <0 0x112A0000 0 0x20000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; clocks = <&infracfg CLK_INFRA_AUDIO>, <&topckgen CLK_TOP_AUD_MUX1_SEL>, -- 1.9.1

3 4

[alsa-devel] [PATCH] ASoC: tegra: Remove SoC-specific Kconfig depends and selects
by Paul Kocialkowski 17 Aug '17

17 Aug '17

This removes the SoC-specific dependencies on the platform drivers, as well as SoC-specific selections of platform drivers for the machine drivers. The rationale behind this change is that the dependencies are not actual build dependencies but run-time ones. The previously listed SoCs were also incomplete: for instance, tegra124 uses the tegra30 platform drivers, which could not be built without ARCH_TEGRA_3x_SOC set. Descriptions of the tristates are also added to allow these options to be set via defconfig/menuconfig. Signed-off-by: Paul Kocialkowski <contact(a)paulk.fr> Acked-by: Thierry Reding <treding(a)nvidia.com> --- sound/soc/tegra/Kconfig | 42 ++++++++++++++---------------------------- 1 file changed, 14 insertions(+), 28 deletions(-) diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig index efbe8d4c019e..6875fc39a575 100644 --- a/sound/soc/tegra/Kconfig +++ b/sound/soc/tegra/Kconfig @@ -9,8 +9,8 @@ config SND_SOC_TEGRA Say Y or M here if you want support for SoC audio on Tegra. config SND_SOC_TEGRA20_AC97 - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 AC97 interface" + depends on SND_SOC_TEGRA select SND_SOC_AC97_BUS select SND_SOC_TEGRA20_DAS help @@ -19,16 +19,16 @@ config SND_SOC_TEGRA20_AC97 machine drivers to support below. config SND_SOC_TEGRA20_DAS - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 DAS module" + depends on SND_SOC_TEGRA help Say Y or M if you want to add support for the Tegra20 DAS module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA20_I2S - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 I2S interface" + depends on SND_SOC_TEGRA select SND_SOC_TEGRA20_DAS help Say Y or M if you want to add support for codecs attached to the @@ -36,8 +36,8 @@ config SND_SOC_TEGRA20_I2S machine drivers to support below. config SND_SOC_TEGRA20_SPDIF - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC + tristate "Tegra20 SPDIF interface" + depends on SND_SOC_TEGRA default m help Say Y or M if you want to add support for the Tegra20 SPDIF interface. @@ -45,16 +45,16 @@ config SND_SOC_TEGRA20_SPDIF below. config SND_SOC_TEGRA30_AHUB - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + tristate "Tegra30 AHUB module" + depends on SND_SOC_TEGRA help - Say Y or M if you want to add support for the Tegra20 AHUB module. + Say Y or M if you want to add support for the Tegra30 AHUB module. You will also need to select the individual machine drivers to support below. config SND_SOC_TEGRA30_I2S - tristate - depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC + tristate "Tegra30 I2S interface" + depends on SND_SOC_TEGRA select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for codecs attached to the @@ -64,8 +64,6 @@ config SND_SOC_TEGRA30_I2S config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using an RT5640 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_RT5640 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -74,8 +72,6 @@ config SND_SOC_TEGRA_RT5640 config SND_SOC_TEGRA_WM8753 tristate "SoC Audio support for Tegra boards using a WM8753 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_WM8753 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -84,8 +80,6 @@ config SND_SOC_TEGRA_WM8753 config SND_SOC_TEGRA_WM8903 tristate "SoC Audio support for Tegra boards using a WM8903 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_WM8903 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -94,7 +88,7 @@ config SND_SOC_TEGRA_WM8903 config SND_SOC_TEGRA_WM9712 tristate "SoC Audio support for Tegra boards using a WM9712 codec" - depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && GPIOLIB + depends on SND_SOC_TEGRA && GPIOLIB select SND_SOC_TEGRA20_AC97 select SND_SOC_WM9712 help @@ -104,7 +98,6 @@ config SND_SOC_TEGRA_WM9712 config SND_SOC_TEGRA_TRIMSLICE tristate "SoC Audio support for TrimSlice board" depends on SND_SOC_TEGRA && I2C - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_TLV320AIC23_I2C help Say Y or M here if you want to add support for SoC audio on the @@ -113,7 +106,6 @@ config SND_SOC_TEGRA_TRIMSLICE config SND_SOC_TEGRA_ALC5632 tristate "SoC Audio support for Tegra boards using an ALC5632 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC select SND_SOC_ALC5632 help Say Y or M here if you want to add support for SoC audio on the @@ -122,8 +114,6 @@ config SND_SOC_TEGRA_ALC5632 config SND_SOC_TEGRA_MAX98090 tristate "SoC Audio support for Tegra boards using a MAX98090 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_MAX98090 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -132,8 +122,6 @@ config SND_SOC_TEGRA_MAX98090 config SND_SOC_TEGRA_RT5677 tristate "SoC Audio support for Tegra boards using a RT5677 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_RT5677 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -142,8 +130,6 @@ config SND_SOC_TEGRA_RT5677 config SND_SOC_TEGRA_SGTL5000 tristate "SoC Audio support for Tegra boards using a SGTL5000 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB - select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC - select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC select SND_SOC_SGTL5000 help Say Y or M here if you want to add support for SoC audio on Tegra -- 2.13.4

1 0

[alsa-devel] [PATCH v2] ASoC: Intel: kbl_rt5663_rt5514_max98927: Add rt5514 spi dailink
by Harsha Priya 17 Aug '17

17 Aug '17

This patch adds a dai to rt5514-spi driver for wake on voice functionality. This v2 patch adds the dependency on SPI in Kconfig Signed-off-by: Hsin-yu Chao <hychao(a)google.com> Signed-off-by: Harsha Priya <harshapriya.n(a)intel.com> --- sound/soc/intel/Kconfig | 3 ++- sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index b301bff..b3c7f55 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -255,11 +255,12 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode" - depends on X86_INTEL_LPSS && I2C + depends on X86_INTEL_LPSS && I2C && SPI select SND_SOC_INTEL_SST select SND_SOC_INTEL_SKYLAKE select SND_SOC_RT5663 select SND_SOC_RT5514 + select SND_SOC_RT5514_SPI select SND_SOC_MAX98927 select SND_SOC_HDAC_HDMI help diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index 0fab2df..c2ef538 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -65,6 +65,7 @@ enum { KBL_DPCM_AUDIO_HS_PB, KBL_DPCM_AUDIO_ECHO_REF_CP, KBL_DPCM_AUDIO_DMIC_CP, + KBL_DPCM_AUDIO_RT5514_DSP, KBL_DPCM_AUDIO_HDMI1_PB, KBL_DPCM_AUDIO_HDMI2_PB, }; @@ -473,6 +474,14 @@ static int kabylake_dmic_startup(struct snd_pcm_substream *substream) .capture_only = 1, .nonatomic = 1, }, + [KBL_DPCM_AUDIO_RT5514_DSP] = { + .name = "rt5514 dsp", + .stream_name = "Wake on Voice", + .cpu_dai_name = "spi-PRP0001:00", + .platform_name = "spi-PRP0001:00", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + }, [KBL_DPCM_AUDIO_DMIC_CP] = { .name = "Kbl Audio DMIC cap", .stream_name = "dmiccap", -- 1.9.1

3 2

[alsa-devel] [PATCH 1/2] ASoC: codec: use enable pin to control dmic start and stop
by Lin Huang 17 Aug '17

17 Aug '17

on some board use enable pin to control dmic start and stop, so add this feature in dmic driver. Signed-off-by: Lin Huang <hl(a)rock-chips.com> --- sound/soc/codecs/Kconfig | 2 +- sound/soc/codecs/dmic.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index ccc5814..dff3586 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -61,7 +61,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_DA7219 if I2C select SND_SOC_DA732X if I2C select SND_SOC_DA9055 if I2C - select SND_SOC_DMIC + select SND_SOC_DMIC if GPIOLIB select SND_SOC_BT_SCO select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c index 32b7a48..c4e5f47 100644 --- a/sound/soc/codecs/dmic.c +++ b/sound/soc/codecs/dmic.c @@ -19,6 +19,8 @@ * */ +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/module.h> @@ -27,6 +29,39 @@ #include <sound/soc.h> #include <sound/soc-dapm.h> +struct dmic_priv { + struct gpio_desc *dmic_en; +}; + +static int dmic_daiops_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct dmic_priv *dmic_data = snd_soc_codec_get_drvdata(codec); + + if (!dmic_data->dmic_en) + return 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + gpiod_set_value(dmic_data->dmic_en, 1); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + gpiod_set_value(dmic_data->dmic_en, 0); + break; + } + + return 0; +} + +static const struct snd_soc_dai_ops dmic_dai_ops = { + .trigger = dmic_daiops_trigger, +}; + static struct snd_soc_dai_driver dmic_dai = { .name = "dmic-hifi", .capture = { @@ -38,8 +73,24 @@ static struct snd_soc_dai_driver dmic_dai = { | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S16_LE, }, + .ops = &dmic_dai_ops, }; +static int dmic_codec_probe(struct snd_soc_codec *codec) +{ + struct dmic_priv *dmic_data = snd_soc_codec_get_drvdata(codec); + + dmic_data->dmic_en = devm_gpiod_get_optional(codec->dev, + "dmicen", GPIOD_OUT_LOW); + + if (IS_ERR(dmic_data->dmic_en)) + return PTR_ERR(dmic_data->dmic_en); + + snd_soc_codec_set_drvdata(codec, dmic_data); + + return 0; +} + static const struct snd_soc_dapm_widget dmic_dapm_widgets[] = { SND_SOC_DAPM_AIF_OUT("DMIC AIF", "Capture", 0, SND_SOC_NOPM, 0, 0), @@ -51,6 +102,7 @@ static const struct snd_soc_dapm_route intercon[] = { }; static struct snd_soc_codec_driver soc_dmic = { + .probe = dmic_codec_probe, .dapm_widgets = dmic_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(dmic_dapm_widgets), .dapm_routes = intercon, @@ -59,6 +111,15 @@ static struct snd_soc_codec_driver soc_dmic = { static int dmic_dev_probe(struct platform_device *pdev) { + struct dmic_priv *dmic_data; + + dmic_data = devm_kzalloc(&pdev->dev, sizeof(*dmic_data), GFP_KERNEL); + + if (!dmic_data) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, dmic_data); + return snd_soc_register_codec(&pdev->dev, &soc_dmic, &dmic_dai, 1); } -- 2.7.4

3 4

[alsa-devel] Applied "ASoC: codec: use enable pin to control dmic start and stop" to the asoc tree
by Mark Brown 17 Aug '17

17 Aug '17

The patch ASoC: codec: use enable pin to control dmic start and stop has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 23c7159a799f3364720b3d250f57bc8e26b17287 Mon Sep 17 00:00:00 2001 From: huang lin <hl(a)rock-chips.com> Date: Thu, 17 Aug 2017 10:24:44 +0800 Subject: [PATCH] ASoC: codec: use enable pin to control dmic start and stop on some board use enable pin to control dmic start and stop, so add this feature in dmic driver. Signed-off-by: Lin Huang <hl(a)rock-chips.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/Kconfig | 2 +- sound/soc/codecs/dmic.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 48 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 6c78b0b49b81..952c44dd5e90 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -71,7 +71,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_DA732X if I2C select SND_SOC_DA9055 if I2C select SND_SOC_DIO2125 - select SND_SOC_DMIC + select SND_SOC_DMIC if GPIOLIB select SND_SOC_ES8316 if I2C select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c index d50f142e2972..b88a1ee66f80 100644 --- a/sound/soc/codecs/dmic.c +++ b/sound/soc/codecs/dmic.c @@ -19,6 +19,8 @@ * */ +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/module.h> @@ -27,6 +29,34 @@ #include <sound/soc.h> #include <sound/soc-dapm.h> +static int dmic_daiops_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct gpio_desc *dmic_en = snd_soc_dai_get_drvdata(dai); + + if (!dmic_en) + return 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + gpiod_set_value(dmic_en, 1); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + gpiod_set_value(dmic_en, 0); + break; + } + + return 0; +} + +static const struct snd_soc_dai_ops dmic_dai_ops = { + .trigger = dmic_daiops_trigger, +}; + static struct snd_soc_dai_driver dmic_dai = { .name = "dmic-hifi", .capture = { @@ -38,8 +68,23 @@ static struct snd_soc_dai_driver dmic_dai = { | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S16_LE, }, + .ops = &dmic_dai_ops, }; +static int dmic_codec_probe(struct snd_soc_codec *codec) +{ + struct gpio_desc *dmic_en; + + dmic_en = devm_gpiod_get_optional(codec->dev, + "dmicen", GPIOD_OUT_LOW); + if (IS_ERR(dmic_en)) + return PTR_ERR(dmic_en); + + snd_soc_codec_set_drvdata(codec, dmic_en); + + return 0; +} + static const struct snd_soc_dapm_widget dmic_dapm_widgets[] = { SND_SOC_DAPM_AIF_OUT("DMIC AIF", "Capture", 0, SND_SOC_NOPM, 0, 0), @@ -50,7 +95,8 @@ static const struct snd_soc_dapm_route intercon[] = { {"DMIC AIF", NULL, "DMic"}, }; -static struct snd_soc_codec_driver soc_dmic = { +static const struct snd_soc_codec_driver soc_dmic = { + .probe = dmic_codec_probe, .component_driver = { .dapm_widgets = dmic_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(dmic_dapm_widgets), -- 2.13.3

1 0

[alsa-devel] [PATCH] ASoC: Intel: kbl: Enabling ASRC for RT5663 codec on kabylake platform
by Naveen M 17 Aug '17

17 Aug '17

From: Harsha Priya N <harshapriya.n(a)intel.com> Patch fixes cracking noise in rt5663 headphones for kbl platform by calling rt5663_sel_asrc_clk_src() for RT5663_AD_STEREO_FILTER to set ASRC. The ASRC function is for asynchronous MCLK and LRCK. For RT5663 ASRC should be enabled to support special i2s clock format like Intel's 100fs. ASRC function will track i2s clock and generate corresponding system clock for codec. Calling this func helps select clock source for both RT5663_AD_STEREO_FILTER and RT5663_DA_STEREO_FILTER filters which fixes the crackling sound. Signed-off-by: Harsha Priya <harshapriya.n(a)intel.com> Signed-off-by: Shruthi Sudhakar <shruthi.sudhakar(a)intel.com> Signed-off-by: Naveen M <naveen.m(a)intel.com> diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c index f9ba977..29b50e4 100644 --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c @@ -312,11 +312,13 @@ static int kabylake_rt5663_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *codec_dai = rtd->codec_dai; int ret; - ret = snd_soc_dai_set_sysclk(codec_dai, - RT5663_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN); /* use ASRC for internal clocks, as PLL rate isn't multiple of BCLK */ - rt5663_sel_asrc_clk_src(codec_dai->codec, RT5663_DA_STEREO_FILTER, 1); + rt5663_sel_asrc_clk_src(codec_dai->codec, + RT5663_DA_STEREO_FILTER | RT5663_AD_STEREO_FILTER, + RT5663_CLK_SEL_I2S1_ASRC); + ret = snd_soc_dai_set_sysclk(codec_dai, + RT5663_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN); if (ret < 0) dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); -- 1.9.1

3 2

[alsa-devel] [PATCH 0/7] ASoC: make snd_soc_ops const
by Bhumika Goyal 17 Aug '17

17 Aug '17

Make these const. Done using Coccinelle. Bhumika Goyal (7): ASoC: aux1x: make snd_soc_ops const ASoC: cirrus: make snd_soc_ops const ASoC: generic: make snd_soc_ops const ASoC: pxa: make snd_soc_ops const ASoC: rockchip: make snd_soc_ops const ASoC: samsung: make snd_soc_ops const ASoC: sh: make snd_soc_ops const sound/soc/au1x/db1200.c | 2 +- sound/soc/cirrus/edb93xx.c | 2 +- sound/soc/cirrus/snappercl15.c | 2 +- sound/soc/generic/audio-graph-card.c | 2 +- sound/soc/generic/audio-graph-scu-card.c | 2 +- sound/soc/pxa/raumfeld.c | 2 +- sound/soc/rockchip/rk3288_hdmi_analog.c | 2 +- sound/soc/samsung/jive_wm8750.c | 2 +- sound/soc/samsung/s3c24xx_simtec.c | 2 +- sound/soc/samsung/s3c24xx_uda134x.c | 2 +- sound/soc/samsung/smdk_spdif.c | 2 +- sound/soc/sh/migor.c | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) -- 1.9.1

3 14