July 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] ASoC TDM channel re-mapping
by Edward Cragg 17 Jun '25

17 Jun '25

Hi, We have an ASoC driver in which we have added support for TDM over an I2S interface. We would like to have the capability of re-mapping the channel ordering, for which i know there is a callback in place to start this process, set_channel_map. The only backend implementation of this is using the ALSA API and the .copy handler in an ALSA PCM driver to mutate data copied out of ALSA before it's DMA'd to hardware. This is in sound/soc/blackfin/bf5xx-i2s-pcm.c The problem we have is that the driver we're using currently uses a dmaengine based PCM driver, and i'm not sure whether this is compatible with using the .copy callback, without reimplementing the driver entirely as an ALSA PCM driver. Since there aren't very many examples in mainline, I was hoping to ask for advice for the best way of doing this. I wondered: - Would it be possible to add a functional copy callback using a dmaengine based PCM driver? - Otherwise, would there be a good way to implement channel remapping in a TDM frame using the dmaengine based PCM driver? or - Would the best way indeed be to reimplement the PCM driver as a normal ALSA PCM driver? Thanks, Ed Cragg

2 2

[alsa-devel] Error patching file pcm_native.c
by Delusion's Master 20 Nov '24

20 Nov '24

Hi, first of all I apologize in case you receive multiple copies of this message, but I forgot to specify a subject in the original mail. I have a problem compiling the latest alsa driver snapshots. Specifically, it's a problem when patching pcm_native.c: [..] copying file alsa-kernel/core/info.c patching file info.c copying file alsa-kernel/core/pcm.c patching file pcm.c Hunk #3 succeeded at 739 (offset 2 lines). Hunk #5 succeeded at 954 (offset 2 lines). Hunk #7 succeeded at 1045 (offset 2 lines). copying file alsa-kernel/core/pcm_native.c patching file pcm_native.c Hunk #4 succeeded at 1544 (offset -25 lines). Hunk #5 succeeded at 2827 (offset 12 lines). Hunk #6 succeeded at 2878 (offset 10 lines). Hunk #7 FAILED at 2906. Hunk #8 FAILED at 2922. Hunk #9 succeeded at 2915 (offset -23 lines). Hunk #10 succeeded at 3036 (offset 10 lines). Hunk #11 succeeded at 3027 (offset -23 lines). Hunk #12 succeeded at 3074 (offset 10 lines). Hunk #13 succeeded at 3098 (offset -23 lines). Hunk #14 succeeded at 3143 (offset 10 lines). Hunk #15 succeeded at 3124 (offset -23 lines). Hunk #16 succeeded at 3214 (offset 10 lines). Hunk #17 succeeded at 3208 (offset -23 lines). Hunk #18 succeeded at 3271 (offset 10 lines). Hunk #19 succeeded at 3304 (offset -23 lines). Hunk #20 succeeded at 3386 (offset 10 lines). Hunk #21 succeeded at 3411 (offset -23 lines). Hunk #22 succeeded at 3456 (offset 10 lines). Hunk #23 succeeded at 3450 (offset -23 lines). Hunk #24 succeeded at 3525 (offset 10 lines). Hunk #25 succeeded at 3644 (offset -23 lines). 2 out of 25 hunks FAILED -- saving rejects to file pcm_native.c.rej make[2]: *** [pcm_native.c] Error 1 It's some days I get this, but I waited to report this since I thought it could be a temporary problem. My OS is Fedora 11 x86_64. Previous snapshots didn't give me this problem, but I can't say which one broke the compilation, since I usually try updated snapshots only at kernel updates. I searched for this error and the only relevant report I could find is this one: http://mailman.alsa-project.org/pipermail/alsa-devel/2009-April/016420.html a report from last April. What could the problem be? Thanks _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx…

3 10

[alsa-devel] unsupported variant of snd_hda_intel
by Alexandre 04 Jul '24

04 Jul '24

Hello, I have an Acer Aspire 4736G laptop. The soundcard that is shipped in this laptop is intel-hda based as shown (actually it's a realtek): cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x9b300000 irq 46 Basic sound output is correct but few feature are missing: - internal mic seems to be found but do not works. - sound output stop working when trying to send it using HDMI output - heads do not work when plugged neither when forcing pulseaudio to use it. I have an ubuntu 10.10 which is shipped with alsa 1.0.23. I have googled around and tried loading the snd-hda-intel with several parameters () as found in HD-Audio-Models.txt to no avail. cat /proc/asound/pcm 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 00-01: ALC888 Digital : ALC888 Digital : playback 1 00-03: NVIDIA HDMI : NVIDIA HDMI : playback 1 Where can I begin to help implement the support for this sound card? I have very skills in developement in general but am ready to try if it is not to hard (I supose I can use previous code for similar models).. I just need a shepherd. Thanks

4 4

[alsa-devel] echo-cancellation plugin advice?
by Max Klein 27 Oct '23

27 Oct '23

> Well, asym wouldn't be the answer. Basically you'll need to open two > slave PCMs in one plugin. So, it's no simple filter-type plugin. > It's doable, but not easy as it sounds, I guess. Takashi, can you please further explain why asym is not the solution and what you see as a problem? I am also trying to figure out if it would be possible to create such a plugin for ALSA? I am still searching for some good starting points on how to write an ALSA plugin... Jean-Marc Valin (http://lists.linuxaudio.org/pipermail/linux-audio-dev/2005-June/012454.html) already released his work as part of speex but as far I know there is no plugin that has been made out of it? Thanks for any hint! -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a

3 2

[alsa-devel] ALSA 1.0.29 release
by Jaroslav Kysela 19 Feb '20

19 Feb '20

Hello all, all userspace packages (except alsa-oss) were released today. You may download them from the ALSA website http://www.alsa-project.org or directly from the FTP server ftp://ftp.alsa-project.org/pub . Full list of changes: http://www.alsa-project.org/main/index.php/Changes_v1.0.28_v1.0.29 Have fun, Jaroslav -- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project; Red Hat, Inc.

2 16

[alsa-devel] [PATCH RFC 00/26] Kill set_fs() in ALSA codes
by Takashi Iwai 27 Mar '19

27 Mar '19

Hi, this is a slightly lengthy patchset, basically targeted for 4.13, thus it's still in RFC. The main purpose of this patchset is to get rid of get_fs() / set_fs() usages in ALSA codes. The patchset starts from a patch that looks fairly irrelevant with the goal (the conversion of HD-audio bind-mute code), but it's a step for the long trail. The biggest change in the patchset is the conversion of copy & silence PCM ops into the new copy_silence ops. It helped for reducing the code size and for handling the in-kernel buffer copies. The current patches are found in topic/kill-set_fs branch of my sound.git tree. thanks, Takashi === Takashi Iwai (26): ALSA: hda - Simplify bound-beep mute control for ALC268 ALSA: hda - Move bind-mixer switch codes to generic parser ALSA: hda - Remove the generic bind ctl helpers ALSA: hda - Remove the use of set_fs() ALSA: hda - Fix a typo in comment ALSA: hda - Remove superfluous header inclusions ALSA: opl3: Kill unused set_fs() ALSA: emu10k1: Get rid of set_fs() usage ALSA: pcm: Remove set_fs() in PCM core code ALSA: pcm: Introduce copy_silence PCM ops ALSA: Update document about copy_silence PCM ops ALSA: dummy: Convert to copy_silence ops ALSA: es1938: Convert to copy_silence ops ALSA: korg1212: Convert to copy_silence ops ALSA: nm256: Convert to copy_silence ops ALSA: rme32: Convert to copy_silence ops ALSA: rme96: Convert to copy_silence ops ALSA: rme9652: Convert to copy_silence ops ALSA: hdsp: Convert to copy_silence ops ALSA: gus: Convert to copy_silence ops ALSA: sb: Convert to copy_silence ops ALSA: sh: Convert to copy_silence ops ASoC: blackfin: Convert to copy_silence ops [media] solo6x10: Convert to copy_silence ops ALSA: pcm: Drop the old copy and silence ops ALSA: pcm: Kill set_fs() usage in OSS layer and USB gadget .../sound/kernel-api/writing-an-alsa-driver.rst | 110 +++++---- drivers/media/pci/solo6x10/solo6x10-g723.c | 11 +- drivers/usb/gadget/function/u_uac1.c | 8 +- include/sound/pcm.h | 19 +- sound/core/oss/pcm_oss.c | 62 ++--- sound/core/pcm_compat.c | 22 +- sound/core/pcm_lib.c | 174 +++++++++----- sound/core/pcm_native.c | 122 ++++++---- sound/drivers/dummy.c | 13 +- sound/drivers/opl3/opl3_oss.c | 14 -- sound/isa/gus/gus_pcm.c | 43 +--- sound/isa/sb/emu8000_pcm.c | 99 +++----- sound/pci/emu10k1/emufx.c | 127 ++++++----- sound/pci/es1938.c | 11 +- sound/pci/hda/hda_codec.c | 251 +++------------------ sound/pci/hda/hda_generic.c | 46 +++- sound/pci/hda/hda_local.h | 61 ----- sound/pci/hda/patch_realtek.c | 37 ++- sound/pci/korg1212/korg1212.c | 128 +++-------- sound/pci/nm256/nm256.c | 35 ++- sound/pci/rme32.c | 49 ++-- sound/pci/rme96.c | 52 ++--- sound/pci/rme9652/hdsp.c | 44 ++-- sound/pci/rme9652/rme9652.c | 46 ++-- sound/sh/sh_dac_audio.c | 40 +--- sound/soc/blackfin/bf5xx-ac97-pcm.c | 6 +- sound/soc/blackfin/bf5xx-ac97.c | 18 +- sound/soc/blackfin/bf5xx-i2s-pcm.c | 46 ++-- sound/soc/soc-pcm.c | 3 +- 29 files changed, 696 insertions(+), 1001 deletions(-) -- 2.12.2

3 40

[alsa-devel] [PATCH 0/x] ASoC: replace platform to component
by Kuninori Morimoto 12 Feb '18

12 Feb '18

Hi Mark These are for replace "platform" to "component". It needs 3 steps I think. step1. "component" needs _add_ function, like "platform" step2. "component" level pcm_new/free support step3. replace platform to component We can get platform pointer from rtd->platform on current style. But these are very categorized pointer, in other words, non generic pointer. This cleanup is 1st step of merging all feature into component. I think new style wil be CPU + Codec + Platform = Component I think merging CPU into Component is already done. This patch set merges Platform feature into Component, and remove Platform. Merging Codec into Component is next step. This patch set will add new rtd connected component list. All CPU/Codec/Platform are connected to this list. And we can get each component pointer by using rtd and its driver name. Here, We can replace rtd->platform like below - struct device *dev = rtd->platform->dev; + struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRIVER_NAME); + struct device *dev = component->dev; - if(rtd->platform->pcm_new) - rtd->platform->pcm_new(yyy); + for_each_rtdcom(rtd, rtdcom) { + component = rtdcom->component; /* rtd connected CPU/Codec/Platform */ + if (component->pcm_new) + component->pcm_new(yyy); + } Now, only platform has pcm_new/free, but in new style, all component can have it. I will post step1/2/3 patch-set. step1 is normal patches. step2/3 are now still [RFC]. Best regards --- Kuninori Morimoto

2 23

[alsa-devel] [PATCH 4/6] alsa-lib:pcm: fix the hw_ptr update until the boundary available.
by sutar.mounesh＠gmail.com 19 Jan '18

19 Jan '18

From: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> For long time test case, the slave_hw_ptr will exceed the boundary and wraparound the slave_hw_ptr. This slave boundary wraparound will cause the rate->hw_ptr to wraparound irrespective of the rate->boundary availability and due to that the available size goes wrong. Hence, To get the correct available size, - Its necessary to increment the rate->hw_ptr upto the rate->boundary and then wraparound the rate->hw_ptr. - While handling fraction part of slave period, rounded value will be introduced by input_frames(). To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Signed-off-by: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> Signed-off-by: Mounesh Sutar <mounesh_sutar(a)mentor.com> diff --git a/src/pcm/pcm_rate.c b/src/pcm/pcm_rate.c index 1f830dd..5bee77c 100644 --- a/src/pcm/pcm_rate.c +++ b/src/pcm/pcm_rate.c @@ -50,7 +50,7 @@ typedef struct _snd_pcm_rate snd_pcm_rate_t; struct _snd_pcm_rate { snd_pcm_generic_t gen; - snd_pcm_uframes_t appl_ptr, hw_ptr; + snd_pcm_uframes_t appl_ptr, hw_ptr, last_slave_hw_ptr; snd_pcm_uframes_t last_commit_ptr; snd_pcm_uframes_t orig_avail_min; snd_pcm_sw_params_t sw_params; @@ -563,14 +563,28 @@ static inline void snd_pcm_rate_sync_hwptr0(snd_pcm_t *pcm, snd_pcm_uframes_t sl { snd_pcm_rate_t *rate = pcm->private_data; + snd_pcm_sframes_t slave_hw_ptr_diff = slave_hw_ptr - rate->last_slave_hw_ptr; + snd_pcm_sframes_t last_slave_hw_ptr_frac; + if (pcm->stream != SND_PCM_STREAM_PLAYBACK) return; - /* FIXME: boundary overlap of slave hw_ptr isn't evaluated here! - * e.g. if slave rate is small... - */ - rate->hw_ptr = - (slave_hw_ptr / rate->gen.slave->period_size) * pcm->period_size + - rate->ops.input_frames(rate->obj, slave_hw_ptr % rate->gen.slave->period_size); + + if (slave_hw_ptr_diff < 0) + slave_hw_ptr_diff += rate->gen.slave->boundary; /* slave boundary wraparound */ + else if (slave_hw_ptr_diff == 0) + return; + last_slave_hw_ptr_frac = rate->last_slave_hw_ptr % rate->gen.slave->period_size; + /* While handling fraction part fo slave period, rounded value will be introduced by input_frames(). + * To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and + * add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Hence, + * rate->hw_ptr += [ (no. of updated slave periods * pcm rate period size) - + * fractional part of last_slave_hw_ptr rounded value + + * fractional part of updated slave hw ptr's rounded value ] */ + rate->hw_ptr += ( + (((last_slave_hw_ptr_frac + slave_hw_ptr_diff) / rate->gen.slave->period_size) * pcm->period_size) - + rate->ops.input_frames(rate->obj, last_slave_hw_ptr_frac) + + rate->ops.input_frames(rate->obj, (last_slave_hw_ptr_frac + slave_hw_ptr_diff) % rate->gen.slave->period_size)); + rate->last_slave_hw_ptr = slave_hw_ptr; rate->hw_ptr %= pcm->boundary; } @@ -635,6 +649,7 @@ static int snd_pcm_rate_prepare(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; @@ -650,6 +665,7 @@ static int snd_pcm_rate_reset(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; -- 1.7.9.5

3 2

[alsa-devel] [PATCH] ASoC: nuc900: Fix a loop timeout test
by Dan Carpenter 11 Dec '17

11 Dec '17

We should be finishing the loop with timeout set to zero but because this is a post-op we exit with timeout == -1. Fixes: 1082e2703a2d ("ASoC: NUC900/audio: add nuc900 audio driver support") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index b6615affe571..fde974d52bb2 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -67,7 +67,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97, /* polling the AC_R_FINISH */ while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout) { @@ -121,7 +121,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg, /* polling the AC_W_FINISH */ while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout)

2 1

[alsa-devel] LADSPA ALSA plugin
by Robert Bielik 26 Nov '17

26 Nov '17

Hi all, Started experimenting with using LADSPA plugins with the ALSA LADSPA PCM plugin, and it works nicely. However, it seems only the PCM is interface is exposed from the plugin. Question is if there is a way to expose the LADSPA plugin parameters directly to alsamixer ? Regards /Rob

1 1

[alsa-devel] [PATCH 0/7] ALSA: Fine-tuning for several function implementations
by SF Markus Elfring 14 Nov '17

14 Nov '17

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Tue, 24 Jan 2017 11:02:34 +0100 Some update suggestions were taken into account from static source code analysis. Markus Elfring (7): seq: Delete unnecessary checks in snd_seq_ioctl_query_subs() seq: Delete unnecessary checks in snd_seq_ioctl_get_subscription() seq: Delete unnecessary checks in snd_seq_ioctl_unsubscribe_port() seq: Delete unnecessary checks in snd_seq_ioctl_subscribe_port() seq: Adjust 16 function calls together with a variable assignment dmasound_core: Move two assignments for the variable "ret" in state_open() dmasound_core: Adjust six function calls together with a variable assignment sound/core/seq/seq_clientmgr.c | 163 ++++++++++++++++++++----------------- sound/oss/dmasound/dmasound_core.c | 33 +++++--- 2 files changed, 109 insertions(+), 87 deletions(-) -- 2.11.0

2 9

[alsa-devel] [PATCH 1/1] ASoC: bcm2835-i2s: Support 384k sample rate
by Clive Messer 10 Nov '17

10 Nov '17

Add support for sample rates up to 384k to bcm2835-i2s driver, with SNDRV_PCM_RATE_CONTINUOUS and specifying 8k min and 384k max, for both playback and capture. Signed-off-by: Clive Messer <clive.messer(a)digitaldreamtime.co.uk> --- sound/soc/bcm/bcm2835-i2s.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c index 6ba2049..4a67db2 100644 --- a/sound/soc/bcm/bcm2835-i2s.c +++ b/sound/soc/bcm/bcm2835-i2s.c @@ -578,7 +578,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = { .playback = { .channels_min = 2, .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE @@ -586,7 +588,9 @@ static struct snd_soc_dai_driver bcm2835_i2s_dai = { .capture = { .channels_min = 2, .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE -- 2.5.5

3 2

[alsa-devel] [PATCH 0/9 v2] Add ASoC support for AMD Stoney APUs
by Alex Deucher 18 Oct '17

18 Oct '17

This patch set updates the AMD GPU and Audio CoProcessor (ACP) audio drivers and the designware i2s driver for Stoney (ST). ST is an APU similar to Carrizo (CZ) which already has ACP audio support. The i2s controller and ACP audio DMA engine are part of the GPU and both need updating so I would like to upstream the whole patch set via one tree if possible. The current code is based on drm-next, but I'm happy to rebase on whatever tree this ends up going through if there are any problems applying. The entire patch set can be viewed here: https://cgit.freedesktop.org/~agd5f/linux/log/?h=stoney_acp Thanks! Alex v2: - Patch 1 is already applied to the audio tree, just including it for completeness since it's required for this patch set and it's not yet in the drm tree. - New patch to share asic types between gpu and audio drivers - ACPI ID changed for rt5650 machine driver - Integrate feedback on other patches Akshu Agrawal (2): drm/amdgpu Moving amdgpu asic types to a separate file ASoC: AMD: Add machine driver for cz rt5650 Vijendar Mukunda (7): ASoC: dwc: Added a quirk DW_I2S_QUIRK_16BIT_IDX_OVERRIDE to dwc driver drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data drm/amd/amdgpu: Added a quirk for Stoney platform ASoC: AMD: disabling memory gating in stoney platform ASoC: AMD: DMA driver changes for Stoney Platform ASoC: AMD: Audio buffer related changes for Stoney drm/amd/amdgpu: Disabling Power Gating for Stoney platform drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 74 ++++++---- drivers/gpu/drm/amd/include/amd_shared.h | 29 +--- include/drm/amd_asic_type.h | 52 +++++++ include/sound/designware_i2s.h | 1 + sound/soc/amd/Kconfig | 7 + sound/soc/amd/Makefile | 2 + sound/soc/amd/acp-pcm-dma.c | 243 ++++++++++++++++++++++++------- sound/soc/amd/acp-rt5645.c | 210 ++++++++++++++++++++++++++ sound/soc/amd/acp.h | 9 ++ sound/soc/dwc/dwc-i2s.c | 6 + 10 files changed, 525 insertions(+), 108 deletions(-) create mode 100644 include/drm/amd_asic_type.h create mode 100644 sound/soc/amd/acp-rt5645.c -- 2.5.5

2 14

[alsa-devel] [PATCH v2 0/2] ASoC: add support for CX2072X CODEC
by simon.ho.cnxt＠gmail.com 13 Oct '17

13 Oct '17

From: Simon Ho <simon.ho(a)conexant.com> Hi Takashi, Mark I corrected the driver based on your input as below. Please help review the code. Mark: - Corrected the coding style. - EQ/DRC settings can be configured from userspace via mixer controls. - Wrongly cast void pointers. - Print I2C error code. - Use memcmp() to check if the new EQ value is different. - Removed unused TDM code. - Removed noisy "out of memory" message. - Corrected ACPI and I2C match table. - Removed unnessary CONFIG_ACPI define. Takashi: - Fixed printf int argument. - Fixed unexpected error code at no MCLK fallback. Thanks, Simon Simon Ho (2): ASoC: cx2072x: Add DT bingings documentation for CX2072X CODEC ASoC: add support for Conexant CX2072X CODEC .../devicetree/bindings/sound/cx2072x.txt | 36 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/cx2072x.c | 2253 ++++++++++++++++++++ sound/soc/codecs/cx2072x.h | 319 +++ 5 files changed, 2615 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cx2072x.txt create mode 100644 sound/soc/codecs/cx2072x.c create mode 100644 sound/soc/codecs/cx2072x.h -- 2.7.4

4 10

[alsa-devel] ASoC Sound Driver I2S over LPE, Intel Baytrail SoC. MinnowBoard Max
by Michael Pogrebinsky 02 Oct '17

02 Oct '17

Hi all, I have the MinnowBoard Max with Baytrail Atom (ValleyView) SoC. I'm attempting to write an Alsa (ASoC) driver for my sound card to work with this board. PCM should work through I2S for this sound card I have. >From my understanding Baytrail's I2S goes over LPE. I read this thread:https://www.mail-archive.com/elinux-minnowboard@lists.elinux.org/msg… So I understand that I need the 3 components for my ASoC driver. However I am having trouble at understanding how to communicate with the LPE to get the I2S working. Here is what I have done so far: I am running Ubuntu 14.04 LTS, kernel : 4.3.0-040300rc4 First of all I downloaded the firmware fw_sst_0f28.bin-48kHz_i2s_master fromhttps://kernel.googlesource.com/pub/scm/linux/kernel/git/firmware/linux… And put it /lib/firmware/intel/. Later I went to the Bios and enabled LPE in PCI mode. I do see the LPE controller now, but it shows as UNCLAIMED. Later I looked at the sound/soc/inte/baytrail/ and from my understanding in order for me to get the I2S working I need to load this module so I did modprobe snd-soc-sst-baytrail-pcm. Later I wrote a simple codec and machine driver (looking at the example of sound/soc/intel/boards/byt_max98090) however everytime I attempt to register the sound card with snd_soc_register_card, I get the following error message in dmesg : "ASoC: CPU DAI baytrail-pcm-audio not registered". >From this I deduct that although I loaded the snd-soc-sst-baytrail-pcm module, the driver has not actually been loaded. I'm clueless on how to proceed from here. I would highly appreciate your help.

3 7

[alsa-devel] [PATCH] ASoC: Intel: Atom: Remove unneeded linux/miscdevice.h include
by Corentin Labbe 19 Sep '17

19 Sep '17

No file in sound/soc/intel/ use any miscdevice. This patch remove this uncessary include. Signed-off-by: Corentin Labbe <clabbe.montjoie(a)gmail.com> --- sound/soc/intel/atom/sst/sst_acpi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index f4d92bb..a971a58 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/miscdevice.h> #include <linux/platform_device.h> #include <linux/firmware.h> #include <linux/pm_runtime.h> -- 2.10.2

2 1

[alsa-devel] [PATCH v2 00/12] AC97 device/driver model revamp
by Robert Jarzmik 19 Sep '17

19 Sep '17

Hi Lars, Mark, Charles, Lee, This serie has been stalled for almost one year, as I wasn't feeling that well lately. I'm quite better now, so let's get back to it. As it's been so long since the last review, I basically withdrew all my former objections and took into account all remarks regardless of my own judgement. This is especially the case with Lars's review on the bus code, where I tried to address all his comments. For this next round, let's sum up what happened : - I rebased against latest Linus's tree => as Lars had made ports to regmap of several impacted wm97xx drivers, all the better for me. - ALSA: ac97: add an ac97 bus => this addresses Lars's comments => history : https://patchwork.kernel.org/patch/9398229/ => there is one remark which was left out, the drop of the table ac97_controller->codecs. The reason is that there are traversals required in the bus scan and controller removal, and the code is way simpler with a table, and the data structure very compact. - Input: wm97xx: split out touchscreen registering => Charles's comment taken into account => history: http://https://patchwork.kernel.org/patch/9398223/ Have a happy review. -- Robert Robert Jarzmik (11): ALSA: ac97: add an ac97 bus ASoC: add new ac97 bus support ASoC: arm: make pxa2xx-ac97-lib ac97 codec agnostic Input: wm97xx: split out touchscreen registering mfd: wm97xx-core: core support for wm97xx Codec Input: wm97xx: add new AC97 bus support ASoC: wm9713: add ac97 new bus support ASoC: wm9712: add ac97 new bus support ASoC: wm9705: add private structure ASoC: wm9705: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support Takashi Iwai (1): ASoC: Fix use-after-free at card unregistration drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/wm97xx-core.c | 252 ++++++++++----- drivers/mfd/Kconfig | 14 + drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 282 +++++++++++++++++ include/linux/mfd/wm97xx.h | 31 ++ include/sound/ac97/codec.h | 118 +++++++ include/sound/ac97/compat.h | 21 ++ include/sound/ac97/controller.h | 85 ++++++ include/sound/pxa2xx-lib.h | 15 +- sound/Kconfig | 2 + sound/Makefile | 1 + sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 10 + sound/ac97/bus.c | 526 ++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 + sound/ac97/snd_ac97_compat.c | 105 +++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 37 ++- sound/arm/pxa2xx-ac97.c | 35 ++- sound/soc/Kconfig | 4 + sound/soc/codecs/Kconfig | 9 +- sound/soc/codecs/wm9705.c | 59 ++-- sound/soc/codecs/wm9712.c | 37 ++- sound/soc/codecs/wm9713.c | 39 ++- sound/soc/pxa/Kconfig | 5 +- sound/soc/pxa/pxa2xx-ac97.c | 43 ++- sound/soc/soc-core.c | 5 +- 29 files changed, 1603 insertions(+), 178 deletions(-) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4

4 23

[alsa-devel] [PATCH 0/9] AC97 device/driver model revamp
by Robert Jarzmik 19 Sep '17

19 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 Last submission was a RFC in here: http://www.gossamer-threads.com/lists/linux/kernel/2446863 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 The driving ideas are still the same, and I put them in [1] for memory. This is the first post RFC submission. In order to make a full demonstration of the framework, wm97xx was converted to an MFD, see [2] for the "why". As this serie is a complete wm9713 change towards the new AC97 bus, here is the patch organization : - 1/9, 2/9, 3/9 and 5/9: the new AC97 bus, for Mark and Takashi to review - 4/9: wm9713 conversion, this one has ugly #ifdefs, should be reviewed more carefully - 6/9: prerequisite for final 9/9, for Marek and Sebastian to approve => this one is independent and can flow through Sebastian's tree in this next-cycle if accepted - 7/9: prerequisite for final 9/9, for Mark/Dmitry => this one is also independent and can flow in this cycle if accepted - 8/9: prerequisite for final 9/9, for Lee to review => this one has a dependency on 2/9, so it probably can't fit in this next-cycle - 9/9: this last one depends on all the patches before, so it can't fit in this next-cycle As a sum-up, I'd like to push for review for this -next cycle at least the patches 1, 2, 3, 5, 6 and 9. Happy review. Robert Jarzmik (9): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: add new ac97 bus support ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support power_supply: wm97xx_battery: use power_supply_get_drvdata Input: wm97xx: split out touchscreen registering mfd: wm97xx-core: core support for wm97xx Codec Input: wm97xx: add new AC97 bus support drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/wm97xx-core.c | 247 +++++++++++----- drivers/mfd/Kconfig | 14 + drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 282 ++++++++++++++++++ drivers/power/supply/wm97xx_battery.c | 25 +- include/linux/mfd/wm97xx.h | 31 ++ include/sound/ac97/codec.h | 115 +++++++ include/sound/ac97/compat.h | 21 ++ include/sound/ac97/controller.h | 85 ++++++ include/sound/ac97/regs.h | 262 ++++++++++++++++ include/sound/ac97_codec.h | 239 +-------------- include/sound/pxa2xx-lib.h | 15 +- sound/Kconfig | 2 + sound/Makefile | 1 + sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 10 + sound/ac97/bus.c | 510 ++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 + sound/ac97/snd_ac97_compat.c | 105 +++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 39 ++- sound/soc/Kconfig | 4 + sound/soc/codecs/Kconfig | 3 +- sound/soc/codecs/wm9713.c | 37 ++- sound/soc/pxa/Kconfig | 5 +- sound/soc/pxa/pxa2xx-ac97.c | 22 +- 28 files changed, 1738 insertions(+), 382 deletions(-) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4 [1] RFC PATCH reminder: Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. [2] As a corollary, wm97xx is changed into a MFD device, which at least spawns: - the touchscreen device - the ac97 codec - the problem to solve was stated in http://www.gossamer-threads.com/lists/linux/kernel/2510113#2510113

9 38

[alsa-devel] [PATCH 0/2] Add ACPI table for the ts3a227e driver
by Thierry Escande 19 Sep '17

19 Sep '17

Hi, This series adds ACPI match table for the ts3a227e driver. The ts3a227e is an Autonomous Audio Accessory Detection and Configuration Switch used to detect audio accessory features like jack plugging and unplugging, mic presence, and button pressed events. This series also fixes a null pointer dereference occurring in the TI max9890 driver when the ts3a227e hardware is present and its driver probed. The jack detection was enabled in the ts3a227e driver before the jack structure was allocated, causing the null pointer access. Regards, Thierry Fang, Yang A (1): ASoC: ts3a227e: add acpi table Thierry Escande (1): ASoc: cht_bsw_max98090_ti: Fix jack initialization sound/soc/codecs/ts3a227e.c | 10 ++++++ sound/soc/intel/boards/cht_bsw_max98090_ti.c | 52 +++++++++++++++++----------- 2 files changed, 41 insertions(+), 21 deletions(-) -- 2.7.4

3 6

[alsa-devel] [PATCH v3 00/11] Add STM32 DFSDM support
by Arnaud Pouliquen 11 Sep '17

11 Sep '17

Hello, I kept it as RFC as i reworked the global design (but also because not full validated...). Regarding Mark and Jonathan's comments, I decided to try an implementation with DMA support in IIO instead of handling it in ASOC. Solution seems more straightforward but as DMA cyclic mode and associated buffer block API is not part of IIO today, I still need some hacks... To be honest, I tried to integrate DMA cyclic management and associated buffer block Consumer API. but no enough expertise on IIO to success... :( Advantage vs V2: - No more data processing need in ASoC , done in IIO - ASoC uses IIO consumer interface ( except for buffer callback) Drawback : - Need to create a "SPI bus" trigger to allo to use Buffer consumer API => Need to find a solution to set this trigger by default in IIO audio driver - No standard buffer management - Implement DMA cyclic in DFSDM IIO driver. - Define specific API to handle buffer callback per period instead of callback per samples generated by iio_push_to_buffers_with_timestamp. V2-V3 delta: - New patches to support ASoC DMA codec in DT - ASoC: Add Bindins for DMIC codec driver. - ASoC: codec: add DT support in dmic codec. - New patches to allow in-kernel set of IIO buffer size and watermark - IIO: consumer: allow to set buffer sizes. - IIO DFSDM drivers - Split audio and ADC support in 2 drivers. - Implement DMA cyclic mode. - Add SPI bus Trigger for buffer management. - IIO sigma delta adc drivers - Suppress "simple and rename driver. - ASoC driver - Suppress DMA engine. - Suppress copy ops. - Use IIO consmumer interface to enable/Disable DFSDM. Regards, Arnaud Arnaud Pouliquen (11): iio: Add hardware consumer support IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM support for Sigma delta ADC IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: Add Bindins for DMIC codec driver ASoC: codec: add DT support in dmic codec ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 120 ++++ Documentation/devicetree/bindings/sound/dmic.txt | 11 + .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 41 ++ drivers/iio/Kconfig | 6 + drivers/iio/Makefile | 1 + drivers/iio/adc/Kconfig | 50 ++ drivers/iio/adc/Makefile | 4 + drivers/iio/adc/sd_adc_modulator.c | 98 +++ drivers/iio/adc/stm32-dfsdm-adc.c | 419 ++++++++++++ drivers/iio/adc/stm32-dfsdm-audio.c | 720 +++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 658 +++++++++++++++++++ drivers/iio/adc/stm32-dfsdm.h | 372 +++++++++++ drivers/iio/buffer/industrialio-buffer-cb.c | 12 + drivers/iio/hw_consumer.c | 156 +++++ include/linux/iio/adc/stm32-dfsdm-audio.h | 41 ++ include/linux/iio/consumer.h | 13 + include/linux/iio/hw_consumer.h | 12 + sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/codecs/dmic.c | 8 + sound/soc/stm/Kconfig | 10 + sound/soc/stm/Makefile | 2 + sound/soc/stm/stm32_adfsdm.c | 362 +++++++++++ 24 files changed, 3131 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/dmic.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-audio.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/hw_consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-audio.h create mode 100644 include/linux/iio/hw_consumer.h create mode 100644 sound/soc/stm/Kconfig create mode 100644 sound/soc/stm/Makefile create mode 100644 sound/soc/stm/stm32_adfsdm.c V2: Patch-set associated to this RFC proposes an implementation of the DFSDM features shared between ASoC and IIO frameworks. Patch-set is only a Skeleton of the drivers, so a base to discuss and validate a design. It contains minimum code to allow probing (with DT) and to expose the ASoC and IIO ABI. Hope that is sufficent in a first step to allow to focus on APIs. In this patch-set there are two new APIs used: - IIO in-kern API: based on hw_customer API proposed by Lars - ASOC <-> IIO API inspired by API defined for hdmi-codec for ASoC/DRM interconnect. API is dedicated to DFSDM only. Notice also that this design is based on following assumption: - Audio stream ABI interface is ASoC, no access to data through IIO ABI for PDM. - ASoC DMA should be used for audio transfer as designed for real time stream. - Need some runtime parameters exchange between ASoC and IIO due to the correlation between the sample frequency, the DFSDM decimation factor and the associated scaling. - "ASoC: dmaengine_pcm: add copy support" patch: I added a patch in ASoC that allows to implement a copy function to process data after DMA transfer. Requested, as DFSDM samples captured contain channel ID on 8-LSB bits and need also a potential rescale to present DAT on 24-bits. - "IIO: ADC: add sigma delta modulator support" patch: Simple dummy driver created to support external Sigma delta modulator. It is binded to DFSDM driver through hw_customer API. - 1.9.1

5 35

[alsa-devel] [PATCH] ASoC: improve RT5514 dependencies
by Arnd Bergmann 05 Sep '17

05 Sep '17

With SND_SOC_RT5514_SPI=m and SND_SOC_RT5514=y, we get this link error: sound/soc/codecs/rt5514.o: In function `rt5514_dsp_voice_wake_up_put': rt5514.c:(.text+0x2068): undefined reference to `rt5514_spi_burst_write' rt5514.c:(.text+0x20c8): undefined reference to `rt5514_spi_burst_write' This adds another Kconfig symbol to work around the link error, forcing the main driver to be a loadable module as well if some other driver selects the I2C side to be built-in. Fixes: 2a18483a7fb4 ("ASoC: Intel: Add Kabylake machine driver for RT5514, RT5663 and MAX98927") Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> --- This can now lead to a configuration with SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=y and SND_SOC_RT5514=m. I don't know if that is a problem or not. An alternative approach would be to flip the dependency between rt5514_spi.ko and rt5514.ko and avoid having the rt5514_spi_burst_write symbol exported. --- sound/soc/codecs/Kconfig | 7 ++++++- sound/soc/intel/Kconfig | 2 +- sound/soc/mediatek/Kconfig | 2 +- sound/soc/rockchip/Kconfig | 1 - 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 024ddc9938ed..115c6144ca2a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -117,7 +117,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT274 if I2C select SND_SOC_RT286 if I2C select SND_SOC_RT298 if I2C - select SND_SOC_RT5514 if I2C + select SND_SOC_RT5514_I2C if I2C select SND_SOC_RT5616 if I2C select SND_SOC_RT5631 if I2C select SND_SOC_RT5640 if I2C @@ -738,6 +738,11 @@ config SND_SOC_RT298 config SND_SOC_RT5514 tristate + default m if SND_SOC_RT5514_SPI=m + default SND_SOC_RT5514_I2C || SND_SOC_RT5514_SPI + +config SND_SOC_RT5514_I2C + tristate config SND_SOC_RT5514_SPI tristate diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index b301bfff1c09..f5ef912190ed 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -259,7 +259,7 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH select SND_SOC_INTEL_SST select SND_SOC_INTEL_SKYLAKE select SND_SOC_RT5663 - select SND_SOC_RT5514 + select SND_SOC_RT5514_I2C select SND_SOC_MAX98927 select SND_SOC_HDAC_HDMI help diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig index 5c68797f36c4..6ccf73ae77ca 100644 --- a/sound/soc/mediatek/Kconfig +++ b/sound/soc/mediatek/Kconfig @@ -67,7 +67,7 @@ config SND_SOC_MT8173_RT5650_RT5514 tristate "ASoC Audio driver for MT8173 with RT5650 RT5514 codecs" depends on SND_SOC_MT8173 && I2C select SND_SOC_RT5645 - select SND_SOC_RT5514 + select SND_SOC_RT5514_I2C help This adds ASoC driver for Mediatek MT8173 boards with the RT5650 and RT5514 codecs. diff --git a/sound/soc/rockchip/Kconfig b/sound/soc/rockchip/Kconfig index c84487805876..c1139aecdfbe 100644 --- a/sound/soc/rockchip/Kconfig +++ b/sound/soc/rockchip/Kconfig @@ -65,7 +65,6 @@ config SND_SOC_RK3399_GRU_SOUND depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP && SPI select SND_SOC_ROCKCHIP_I2S select SND_SOC_MAX98357A - select SND_SOC_RT5514 select SND_SOC_DA7219 select SND_SOC_RT5514_SPI help -- 2.9.0

3 4

[alsa-devel] [RFC PATCH 0/7] AC97 device/driver model revamp
by Robert Jarzmik 04 Sep '17

04 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 And now it transformed into this RFC, which would bring a ground for AC'97 devices closer to the linux device/driver model. This is just an RFC to see if we understand each other Mark. Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. Cheers. -- Robert Robert Jarzmik (7): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support ARM: pxa: mioa701 remove wm9713 from platform devices ASoC: mioa701_wm9713: convert to new ac97 bus ASoC: add new ac97 bus support arch/arm/mach-pxa/mioa701.c | 1 - include/sound/ac97/codec.h | 98 ++++++++++++ include/sound/ac97/compat.h | 21 +++ include/sound/ac97/controller.h | 39 +++++ include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++ include/sound/ac97_codec.h | 239 +---------------------------- include/sound/pxa2xx-lib.h | 14 +- sound/Kconfig | 7 + sound/Makefile | 1 + sound/ac97/Kconfig | 9 ++ sound/ac97/Makefile | 5 + sound/ac97/ac97_core.h | 10 ++ sound/ac97/bus.c | 330 ++++++++++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 ++ sound/ac97/snd_ac97_compat.c | 104 +++++++++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 31 ++-- sound/soc/Kconfig | 4 + sound/soc/codecs/wm9713.c | 62 +++++++- sound/soc/pxa/Kconfig | 4 +- sound/soc/pxa/mioa701_wm9713.c | 4 +- sound/soc/pxa/pxa2xx-ac97.c | 12 +- 22 files changed, 1000 insertions(+), 273 deletions(-) create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4

3 29

[alsa-devel] [PATCH v4 00/12] AC97 device/driver model revamp
by Robert Jarzmik 04 Sep '17

04 Sep '17

Hi Lars, Mark, Charles, Lee, This is a minor revision after v3, mainly reviews from Takashi, Charles. I did more extensive testing of load/unload of the whole serie, and apart from a bug in wm97xx-core in touchscreen tree (for a which a patch will be sent apart), it seems to work properly. I extracted the diff from the v3 of sound/ac97 which is in [1] for easier spotting of what has globally changed. I would still need a review from you, Lee, for the mfd patch (patch 6/12). Happy review. -- Robert Robert Jarzmik (12): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: add new ac97 bus support ASoC: arm: make pxa2xx-ac97-lib ac97 codec agnostic Input: wm97xx: split out touchscreen registering mfd: wm97xx-core: core support for wm97xx Codec Input: wm97xx: add new AC97 bus support ASoC: wm9713: add ac97 new bus support ASoC: wm9712: add ac97 new bus support ASoC: wm9705: add private structure ASoC: wm9705: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/wm97xx-core.c | 252 ++++++++++----- drivers/mfd/Kconfig | 15 + drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 405 ++++++++++++++++++++++++ include/linux/mfd/wm97xx.h | 31 ++ include/sound/ac97/codec.h | 118 +++++++ include/sound/ac97/compat.h | 21 ++ include/sound/ac97/controller.h | 84 +++++ include/sound/ac97/regs.h | 262 +++++++++++++++ include/sound/ac97_codec.h | 239 +------------- include/sound/pxa2xx-lib.h | 15 +- sound/Kconfig | 2 + sound/Makefile | 1 + sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 10 + sound/ac97/bus.c | 542 ++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 + sound/ac97/snd_ac97_compat.c | 105 +++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 37 ++- sound/arm/pxa2xx-ac97.c | 35 ++- sound/soc/codecs/Kconfig | 9 +- sound/soc/codecs/wm9705.c | 59 ++-- sound/soc/codecs/wm9712.c | 37 ++- sound/soc/codecs/wm9713.c | 39 ++- sound/soc/pxa/Kconfig | 5 +- sound/soc/pxa/pxa2xx-ac97.c | 46 ++- 29 files changed, 2001 insertions(+), 414 deletions(-) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.11.0 [1] sound diff from last revision (git diff submit/ac97-2..submit/ac97-3 sound/ac97 include/sound/ac97) diff --git a/sound/ac97/bus.c b/sound/ac97/bus.c index 7cda8175341e..af618a0e89cb 100644 --- a/sound/ac97/bus.c +++ b/sound/ac97/bus.c @@ -76,7 +76,6 @@ static void ac97_codec_release(struct device *dev) adev = to_ac97_device(dev); ac97_ctrl = adev->ac97_ctrl; ac97_ctrl->codecs[adev->num] = NULL; - sysfs_remove_link(&dev->kobj, "ac97_controller"); kfree(adev); } @@ -269,8 +268,29 @@ static const struct attribute_group *ac97_adapter_groups[] = { NULL, }; +static void ac97_del_adapter(struct ac97_controller *ac97_ctrl) +{ + mutex_lock(&ac97_controllers_mutex); + ac97_ctrl_codecs_unregister(ac97_ctrl); + list_del(&ac97_ctrl->controllers); + mutex_unlock(&ac97_controllers_mutex); + + device_unregister(&ac97_ctrl->adap); +} + +static void ac97_adapter_release(struct device *dev) +{ + struct ac97_controller *ac97_ctrl; + + ac97_ctrl = to_ac97_controller(dev); + idr_remove(&ac97_adapter_idr, ac97_ctrl->nr); + dev_dbg(&ac97_ctrl->adap, "adapter unregistered by %s\n", + dev_name(ac97_ctrl->parent)); +} + static const struct device_type ac97_adapter_type = { .groups = ac97_adapter_groups, + .release = ac97_adapter_release, }; static int ac97_add_adapter(struct ac97_controller *ac97_ctrl) @@ -298,16 +318,6 @@ static int ac97_add_adapter(struct ac97_controller *ac97_ctrl) return ret; } -static void ac97_del_adapter(struct ac97_controller *ac97_ctrl) -{ - mutex_lock(&ac97_controllers_mutex); - ac97_ctrl_codecs_unregister(ac97_ctrl); - list_del(&ac97_ctrl->controllers); - idr_remove(&ac97_adapter_idr, ac97_ctrl->nr); - mutex_unlock(&ac97_controllers_mutex); - put_device(&ac97_ctrl->adap); -} - /** * snd_ac97_controller_register - register an ac97 controller * @ops: the ac97 bus operations @@ -508,7 +518,7 @@ static int ac97_bus_remove(struct device *dev) } static struct bus_type ac97_bus_type = { - .name = "ac97", + .name = "ac97bus", .dev_groups = ac97_dev_groups, .match = ac97_bus_match, .pm = &ac97_pm, @@ -522,5 +532,11 @@ static int __init ac97_bus_init(void) } subsys_initcall(ac97_bus_init); +static void __exit ac97_bus_exit(void) +{ + bus_unregister(&ac97_bus_type); +} +module_exit(ac97_bus_exit); + MODULE_LICENSE("GPL"); MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik(a)free.fr>");

4 19

[alsa-devel] [PATCH 1/7] staging: max98927: Added TDM support
by Ryan Lee 31 Aug '17

31 Aug '17

Signed-off-by: Ryan Lee <ryans.lee(a)maximintegrated.com> --- sound/soc/codecs/max98927.c | 141 ++++++++++++++++++++++++++++++++++++-------- sound/soc/codecs/max98927.h | 6 +- 2 files changed, 120 insertions(+), 27 deletions(-) diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c index b5ee294..99d6e41 100644 --- a/sound/soc/codecs/max98927.c +++ b/sound/soc/codecs/max98927.c @@ -1,7 +1,7 @@ /* * max98927.c -- MAX98927 ALSA Soc Audio driver * - * Copyright (C) 2016 Maxim Integrated Products + * Copyright (C) 2016-2017 Maxim Integrated Products * Author: Ryan Lee <ryans.lee(a)maximintegrated.com> * * This program is free software; you can redistribute it and/or modify it @@ -146,6 +146,7 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec); unsigned int mode = 0; unsigned int format = 0; + bool use_pdm = false; unsigned int invert = 0; dev_dbg(codec->dev, "%s: fmt 0x%08X\n", __func__, fmt); @@ -187,22 +188,27 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) /* interface format */ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: - max98927->iface |= SND_SOC_DAIFMT_I2S; format = MAX98927_PCM_FORMAT_I2S; break; case SND_SOC_DAIFMT_LEFT_J: - max98927->iface |= SND_SOC_DAIFMT_LEFT_J; format = MAX98927_PCM_FORMAT_LJ; break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98927_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98927_PCM_FORMAT_TDM_MODE0; + break; case SND_SOC_DAIFMT_PDM: - max98927->iface |= SND_SOC_DAIFMT_PDM; + use_pdm = true; break; default: return -EINVAL; } + max98927->iface = fmt & SND_SOC_DAIFMT_FORMAT_MASK; - /* pcm channel configuration */ - if (max98927->iface & (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_LEFT_J)) { + if (!use_pdm) { + /* pcm channel configuration */ regmap_update_bits(max98927->regmap, MAX98927_R0018_PCM_RX_EN_A, MAX98927_PCM_RX_CH0_EN | MAX98927_PCM_RX_CH1_EN, @@ -217,13 +223,12 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) MAX98927_R003B_SPK_SRC_SEL, MAX98927_SPK_SRC_MASK, 0); - } else regmap_update_bits(max98927->regmap, - MAX98927_R0018_PCM_RX_EN_A, - MAX98927_PCM_RX_CH0_EN | MAX98927_PCM_RX_CH1_EN, 0); + MAX98927_R0035_PDM_RX_CTRL, + MAX98927_PDM_RX_EN_MASK, 0); - /* pdm channel configuration */ - if (max98927->iface & SND_SOC_DAIFMT_PDM) { + } else { + /* pdm channel configuration */ regmap_update_bits(max98927->regmap, MAX98927_R0035_PDM_RX_CTRL, MAX98927_PDM_RX_EN_MASK, 1); @@ -231,10 +236,12 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) regmap_update_bits(max98927->regmap, MAX98927_R003B_SPK_SRC_SEL, MAX98927_SPK_SRC_MASK, 3); - } else + regmap_update_bits(max98927->regmap, - MAX98927_R0035_PDM_RX_CTRL, - MAX98927_PDM_RX_EN_MASK, 0); + MAX98927_R0018_PCM_RX_EN_A, + MAX98927_PCM_RX_CH0_EN | MAX98927_PCM_RX_CH1_EN, 0); + + } return 0; } @@ -245,6 +252,21 @@ static const int rate_table[] = { 13000000, 19200000, }; +/* BCLKs per LRCLK */ +static const int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 384, 512, +}; + +static int max98927_get_bclk_sel(int bclk) +{ + int i; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} static int max98927_set_clock(struct max98927_priv *max98927, struct snd_pcm_hw_params *params) { @@ -270,19 +292,17 @@ static int max98927_set_clock(struct max98927_priv *max98927, i << MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT); } - switch (blr_clk_ratio) { - case 32: - value = 2; - break; - case 48: - value = 3; - break; - case 64: - value = 4; - break; - default: + if ((max98927->iface == SND_SOC_DAIFMT_DSP_A) || + (max98927->iface == SND_SOC_DAIFMT_DSP_B)) + return 0; + + /* BCLK configuration */ + value = max98927_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(codec->dev, "BCLK %d not supported\n", blr_clk_ratio); return -EINVAL; } + regmap_update_bits(max98927->regmap, MAX98927_R0022_PCM_CLK_SETUP, MAX98927_PCM_CLK_SETUP_BSEL_MASK, @@ -386,6 +406,76 @@ static int max98927_dai_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } +static int max98927_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_codec *codec = dai->codec; + struct max98927_priv *max98927 = snd_soc_codec_get_drvdata(codec); + int bsel = 0; + unsigned int chan_sz = 0; + + /* BCLK configuration */ + bsel = max98927_get_bclk_sel(slots * slot_width); + if (bsel == 0) { + dev_err(codec->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98927->regmap, + MAX98927_R0022_PCM_CLK_SETUP, + MAX98927_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(codec->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98927->regmap, + MAX98927_R0020_PCM_MODE_CFG, + MAX98927_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_write(max98927->regmap, + MAX98927_R0018_PCM_RX_EN_A, + rx_mask & 0xFF); + regmap_write(max98927->regmap, + MAX98927_R0019_PCM_RX_EN_B, + (rx_mask & 0xFF00) >> 8); + + /* Tx slot configuration */ + regmap_write(max98927->regmap, + MAX98927_R001A_PCM_TX_EN_A, + tx_mask & 0xFF); + regmap_write(max98927->regmap, + MAX98927_R001B_PCM_TX_EN_B, + (tx_mask & 0xFF00) >> 8); + + /* Tx slot Hi-Z configuration */ + regmap_write(max98927->regmap, + MAX98927_R001C_PCM_TX_HIZ_CTRL_A, + ~tx_mask & 0xFF); + regmap_write(max98927->regmap, + MAX98927_R001D_PCM_TX_HIZ_CTRL_B, + (~tx_mask & 0xFF00) >> 8); + + return 0; +} + #define MAX98927_RATES SNDRV_PCM_RATE_8000_48000 #define MAX98927_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ @@ -405,6 +495,7 @@ static const struct snd_soc_dai_ops max98927_dai_ops = { .set_sysclk = max98927_dai_set_sysclk, .set_fmt = max98927_dai_set_fmt, .hw_params = max98927_dai_hw_params, + .set_tdm_slot = max98927_dai_tdm_slot, }; static int max98927_dac_event(struct snd_soc_dapm_widget *w, diff --git a/sound/soc/codecs/max98927.h b/sound/soc/codecs/max98927.h index ece6a60..bf7a6f92 100644 --- a/sound/soc/codecs/max98927.h +++ b/sound/soc/codecs/max98927.h @@ -1,7 +1,7 @@ /* * max98927.h -- MAX98927 ALSA Soc Audio driver * - * Copyright 2013-15 Maxim Integrated Products + * Copyright (C) 2016-2017 Maxim Integrated Products * Author: Ryan Lee <ryans.lee(a)maximintegrated.com> * * This program is free software; you can redistribute it and/or modify it @@ -161,7 +161,9 @@ #define MAX98927_PCM_MODE_CFG_FORMAT_SHIFT (3) #define MAX98927_PCM_FORMAT_I2S (0x0 << 0) #define MAX98927_PCM_FORMAT_LJ (0x1 << 0) - +#define MAX98927_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98927_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98927_PCM_FORMAT_TDM_MODE2 (0x5 << 0) #define MAX98927_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) #define MAX98927_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) #define MAX98927_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) -- 2.7.4

2 9

[alsa-devel] [PATCH 4/5] staging: max98927: Added missing \n to end of dev_err messages
by Ryan Lee 31 Aug '17

31 Aug '17

Signed-off-by: Ryan Lee <ryans.lee(a)maximintegrated.com> --- sound/soc/codecs/max98927.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c index e787a03..9b864e2 100644 --- a/sound/soc/codecs/max98927.c +++ b/sound/soc/codecs/max98927.c @@ -160,7 +160,7 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) mode = MAX98927_PCM_MASTER_MODE_MASTER; break; default: - dev_err(codec->dev, "DAI clock mode unsupported"); + dev_err(codec->dev, "DAI clock mode unsupported\n"); return -EINVAL; } @@ -176,7 +176,7 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) invert = MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE; break; default: - dev_err(codec->dev, "DAI invert mode unsupported"); + dev_err(codec->dev, "DAI invert mode unsupported\n"); return -EINVAL; } @@ -331,7 +331,7 @@ static int max98927_dai_hw_params(struct snd_pcm_substream *substream, chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_32; break; default: - dev_err(codec->dev, "format unsupported %d", + dev_err(codec->dev, "format unsupported %d\n", params_format(params)); goto err; } -- 2.7.4

2 1