March 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v3 6/6] pcm:plug: save converter config
by sutar.mounesh＠gmail.com 18 Mar '17

18 Mar '17

From: Andreas Pape <apape(a)de.adit-jv.com> Passed config is freed after call to open, thus it is invalid when trying to extract the converter name. So config entry is saved for later usage. Signed-off-by: Andreas Pape <apape(a)de.adit-jv.com> Signed-off-by: Mounesh Sutar <sutar.mounesh(a)gmail.com> diff --git a/src/pcm/pcm_plug.c b/src/pcm/pcm_plug.c index 266707b..c643278 100644 --- a/src/pcm/pcm_plug.c +++ b/src/pcm/pcm_plug.c @@ -64,6 +64,10 @@ static int snd_pcm_plug_close(snd_pcm_t *pcm) snd_pcm_plug_t *plug = pcm->private_data; int err, result = 0; free(plug->ttable); + if (plug->rate_converter) { + snd_config_delete((snd_config_t*)plug->rate_converter); + plug->rate_converter = NULL; + } assert(plug->gen.slave == plug->req_slave); if (plug->gen.close_slave) { snd_pcm_unlink_hw_ptr(pcm, plug->req_slave); @@ -1108,7 +1112,14 @@ int snd_pcm_plug_open(snd_pcm_t **pcmp, plug->sformat = sformat; plug->schannels = schannels; plug->srate = srate; - plug->rate_converter = rate_converter; + if (rate_converter) { + if ((err = snd_config_copy((snd_config_t**)&plug->rate_converter, + (snd_config_t *)rate_converter)) < 0) { + free(plug); + return err; + } + } + plug->gen.slave = plug->req_slave = slave; plug->gen.close_slave = close_slave; plug->route_policy = route_policy; @@ -1119,6 +1130,10 @@ int snd_pcm_plug_open(snd_pcm_t **pcmp, err = snd_pcm_new(&pcm, SND_PCM_TYPE_PLUG, name, slave->stream, slave->mode); if (err < 0) { + if (plug->rate_converter) { + snd_config_delete((snd_config_t*)plug->rate_converter); + plug->rate_converter = NULL; + } free(plug); return err; } -- 2.7.4

3 3

[alsa-devel] [PATCH] ASoC: cs35l35: Stash dev pointer directly rather than CODEC pointer
by Charles Keepax 17 Mar '17

17 Mar '17

The driver stashes a CODEC pointer in the cs35l35_private structure, which is used to obtain a struct device pointer for error messages in the interrupt handler. However, doing so is not very safe as the interrupt is registered, as it should be in bus probe, but the CODEC pointer can't be safely stored until the ASoC level probe. This leaves a window between the two probes where if any interrupts are received a NULL pointer will be deferenced in the IRQ handler. Fix this issue by saving a pointer to the device directly and passing that to the error messages in the interrupt handler rather than using the CODEC pointer to access the device pointer. Signed-off-by: Charles Keepax <ckeepax(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/cs35l35.c | 29 ++++++++++++++--------------- sound/soc/codecs/cs35l35.h | 2 +- 2 files changed, 15 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/cs35l35.c b/sound/soc/codecs/cs35l35.c index 05117fc..1d9f332 100644 --- a/sound/soc/codecs/cs35l35.c +++ b/sound/soc/codecs/cs35l35.c @@ -741,8 +741,6 @@ static int cs35l35_codec_probe(struct snd_soc_codec *codec) struct monitor_cfg *monitor_config = &cs35l35->pdata.mon_cfg; int ret; - cs35l35->codec = codec; - /* Set Platform Data */ if (cs35l35->pdata.bst_vctl) regmap_update_bits(cs35l35->regmap, CS35L35_BST_CVTR_V_CTL, @@ -1004,7 +1002,6 @@ static struct regmap_config cs35l35_regmap = { static irqreturn_t cs35l35_irq(int irq, void *data) { struct cs35l35_private *cs35l35 = data; - struct snd_soc_codec *codec = cs35l35->codec; unsigned int sticky1, sticky2, sticky3, sticky4; unsigned int mask1, mask2, mask3, mask4, current1; @@ -1032,7 +1029,7 @@ static irqreturn_t cs35l35_irq(int irq, void *data) /* handle the interrupts */ if (sticky1 & CS35L35_CAL_ERR) { - dev_crit(codec->dev, "Calibration Error\n"); + dev_crit(cs35l35->dev, "Calibration Error\n"); /* error is no longer asserted; safe to reset */ if (!(current1 & CS35L35_CAL_ERR)) { @@ -1051,10 +1048,10 @@ static irqreturn_t cs35l35_irq(int irq, void *data) } if (sticky1 & CS35L35_AMP_SHORT) { - dev_crit(codec->dev, "AMP Short Error\n"); + dev_crit(cs35l35->dev, "AMP Short Error\n"); /* error is no longer asserted; safe to reset */ if (!(current1 & CS35L35_AMP_SHORT)) { - dev_dbg(codec->dev, "Amp short error release\n"); + dev_dbg(cs35l35->dev, "Amp short error release\n"); regmap_update_bits(cs35l35->regmap, CS35L35_PROT_RELEASE_CTL, CS35L35_SHORT_RLS, 0); @@ -1069,11 +1066,11 @@ static irqreturn_t cs35l35_irq(int irq, void *data) } if (sticky1 & CS35L35_OTW) { - dev_warn(codec->dev, "Over temperature warning\n"); + dev_warn(cs35l35->dev, "Over temperature warning\n"); /* error is no longer asserted; safe to reset */ if (!(current1 & CS35L35_OTW)) { - dev_dbg(codec->dev, "Over temperature warn release\n"); + dev_dbg(cs35l35->dev, "Over temperature warn release\n"); regmap_update_bits(cs35l35->regmap, CS35L35_PROT_RELEASE_CTL, CS35L35_OTW_RLS, 0); @@ -1088,10 +1085,10 @@ static irqreturn_t cs35l35_irq(int irq, void *data) } if (sticky1 & CS35L35_OTE) { - dev_crit(codec->dev, "Over temperature error\n"); + dev_crit(cs35l35->dev, "Over temperature error\n"); /* error is no longer asserted; safe to reset */ if (!(current1 & CS35L35_OTE)) { - dev_dbg(codec->dev, "Over temperature error release\n"); + dev_dbg(cs35l35->dev, "Over temperature error release\n"); regmap_update_bits(cs35l35->regmap, CS35L35_PROT_RELEASE_CTL, CS35L35_OTE_RLS, 0); @@ -1106,7 +1103,7 @@ static irqreturn_t cs35l35_irq(int irq, void *data) } if (sticky3 & CS35L35_BST_HIGH) { - dev_crit(codec->dev, "VBST error: powering off!\n"); + dev_crit(cs35l35->dev, "VBST error: powering off!\n"); regmap_update_bits(cs35l35->regmap, CS35L35_PWRCTL2, CS35L35_PDN_AMP, CS35L35_PDN_AMP); regmap_update_bits(cs35l35->regmap, CS35L35_PWRCTL1, @@ -1114,7 +1111,7 @@ static irqreturn_t cs35l35_irq(int irq, void *data) } if (sticky3 & CS35L35_LBST_SHORT) { - dev_crit(codec->dev, "LBST error: powering off!\n"); + dev_crit(cs35l35->dev, "LBST error: powering off!\n"); regmap_update_bits(cs35l35->regmap, CS35L35_PWRCTL2, CS35L35_PDN_AMP, CS35L35_PDN_AMP); regmap_update_bits(cs35l35->regmap, CS35L35_PWRCTL1, @@ -1122,13 +1119,13 @@ static irqreturn_t cs35l35_irq(int irq, void *data) } if (sticky2 & CS35L35_VPBR_ERR) - dev_dbg(codec->dev, "Error: Reactive Brownout\n"); + dev_dbg(cs35l35->dev, "Error: Reactive Brownout\n"); if (sticky4 & CS35L35_VMON_OVFL) - dev_dbg(codec->dev, "Error: VMON overflow\n"); + dev_dbg(cs35l35->dev, "Error: VMON overflow\n"); if (sticky4 & CS35L35_IMON_OVFL) - dev_dbg(codec->dev, "Error: IMON overflow\n"); + dev_dbg(cs35l35->dev, "Error: IMON overflow\n"); return IRQ_HANDLED; } @@ -1365,6 +1362,8 @@ static int cs35l35_i2c_probe(struct i2c_client *i2c_client, if (!cs35l35) return -ENOMEM; + cs35l35->dev = dev; + i2c_set_clientdata(i2c_client, cs35l35); cs35l35->regmap = devm_regmap_init_i2c(i2c_client, &cs35l35_regmap); if (IS_ERR(cs35l35->regmap)) { diff --git a/sound/soc/codecs/cs35l35.h b/sound/soc/codecs/cs35l35.h index c203081..156d2f0 100644 --- a/sound/soc/codecs/cs35l35.h +++ b/sound/soc/codecs/cs35l35.h @@ -265,7 +265,7 @@ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) struct cs35l35_private { - struct snd_soc_codec *codec; + struct device *dev; struct cs35l35_platform_data pdata; struct regmap *regmap; struct regulator_bulk_data supplies[2]; -- 2.1.4

3 2

[alsa-devel] [RFC PATCH v2 0/2] master clock issues
by olivier moysan 17 Mar '17

17 Mar '17

Hello, I face two issues using wm8994 codec driver. Below is a description of the use cases rising the problem. I added the patches which allow to fix these issues. These minimalist patches can be seen as a starting point for a discussion on the best way to handle the use cases exposed. - ASoC: wm8994: default master clock selection Use case: CPU DAI and codec are managed through simple card. Wolson codec wm8994 is set as slave of CPU DAI and CPU DAI feeds codec with master clock. Master clock is derived from mclk-fs property and provided to CPU DAI and codec through snd_soc_dai_set_sysclk API. Analysis: The simple card assumes id 0 for master clock. However wm8994 codec exposes master clock ids from 1 to 4. (MCLK1, MCLK2 ..) The proposal in this patch is to define a default selection regarding master clock when id 0 is provided. - ASoC: wm8994: delay aifxclk activation Use case: Wolson codec wm8994 is set as slave of CPU DAI and CPU DAI feeds codec with master clock. CPU DAI generates master clock when enabled in trigger callback. So master clock is available only at runtime. Master clock is not available when configuring codec through alsa controls. Analysis: When we configure aifx clock while master clock is not active, related registers are not updated in wm8894 codec. A way to go around this problem, is to delay aifxclk activation until SND_SOC_DAPM_POST_PMU DAPM stage. The purpose of patch here is to illustrate this workaround. What I cannot clearly figure out, is how this may impact other uses of wm8894 codec. I try to know if it's worth investigating further in this direction or if it will not be applicable. If not applicable, what maybe the other options ? Changes in v2: Add change log on aifxclk delay patch. regards olivier olivier moysan (2): ASoC: wm8994: default master clock selection ASoC: wm8994: delay aifxclk activation sound/soc/codecs/wm8994.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) -- 1.9.1

1 2

[alsa-devel] [PATCH v2] ASoC: rt286: fix headphone click/crack noise on Dell XPS 9343 I2S mode
by Kai-Heng Feng 17 Mar '17

17 Mar '17

HDA mode fixed the issue by these two commits: '9476d369d7b3 ALSA: hda - Mute headphone pin on suspend on XPS13 9333' '3e1b0c4a9d56 ALSA: hda - Fix click noise at start on Dell XPS13' Apply the same workarounds to rt286 can solve the issue. When jack is plugged, it rapidly generates I2C interrupts, which triggers rt286_irq() and rt286_jack_detect(), which produces the click noise. alc_fixup_dell_xps13() in patch_realtek.c sets up a pin that can stop the frantic interrupts, hence avoids the click noise. When rt286 is under powersaving state, play a sound with headphone or plug a headphone in will produce a loud crack sound. Set AMP_OUT_MUTE before power events can make the noise less noticeable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=112611 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1313434 Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/soc/codecs/rt286.c | 48 +++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 9c365a7f758d..ec4caef045e9 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -36,6 +36,9 @@ #define RT286_VENDOR_ID 0x10ec0286 #define RT288_VENDOR_ID 0x10ec0288 +#define AMP_OUT_MUTE 0xb080 +#define AMP_OUT_UNMUTE 0xb000 + struct rt286_priv { struct reg_default *index_cache; int index_cache_size; @@ -47,6 +50,7 @@ struct rt286_priv { struct delayed_work jack_detect_work; int sys_clk; int clk_id; + bool is_dell_dino; }; static const struct reg_default rt286_index_def[] = { @@ -472,6 +476,32 @@ static int rt286_set_dmic1_event(struct snd_soc_dapm_widget *w, return 0; } +/* Power event function to workaround headphone crack noise */ +static int rt286_hp_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct rt286_priv *rt286 = snd_soc_codec_get_drvdata(codec); + + if (!rt286->is_dell_dino) + return 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMD: + case SND_SOC_DAPM_POST_PMD: + case SND_SOC_DAPM_POST_PMU: + snd_soc_write(codec, RT286_SET_AMP_GAIN_HPO, AMP_OUT_MUTE); + break; + case SND_SOC_DAPM_PRE_PMU: + snd_soc_write(codec, RT286_SET_AMP_GAIN_HPO, AMP_OUT_UNMUTE); + break; + default: + return 0; + } + + return 0; +} + static int rt286_ldo2_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -578,7 +608,9 @@ static const struct snd_soc_dapm_widget rt286_dapm_widgets[] = { SND_SOC_DAPM_MUX("HPO Mux", SND_SOC_NOPM, 0, 0, &rt286_hpo_mux), SND_SOC_DAPM_SUPPLY("HP Power", RT286_SET_PIN_HPO, - RT286_SET_PIN_SFT, 0, NULL, 0), + RT286_SET_PIN_SFT, 0, rt286_hp_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), /* Output Mixer */ SND_SOC_DAPM_MIXER("Front", RT286_SET_POWER(RT286_DAC_OUT1), 0, 1, @@ -1175,8 +1207,10 @@ static int rt286_i2c_probe(struct i2c_client *i2c, if (pdata) rt286->pdata = *pdata; + rt286->is_dell_dino = dmi_check_system(dmi_dell_dino) ? true : false; + if (dmi_check_system(force_combo_jack_table) || - dmi_check_system(dmi_dell_dino)) + rt286->is_dell_dino) rt286->pdata.cbj_en = true; regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3); @@ -1192,6 +1226,11 @@ static int rt286_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt286->regmap, RT286_CBJ_CTRL1, 0xf000, 0xb000); } else { + /* Fix headphone click noise */ + if (rt286->is_dell_dino) + regmap_write(rt286->regmap, + RT286_MIC1_DET_CTRL, 0x0020); + regmap_update_bits(rt286->regmap, RT286_CBJ_CTRL1, 0xf000, 0x5000); } @@ -1215,7 +1254,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737); regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f); - if (dmi_check_system(dmi_dell_dino)) { + if (rt286->is_dell_dino) { regmap_update_bits(rt286->regmap, RT286_SET_GPIO_MASK, 0x40, 0x40); regmap_update_bits(rt286->regmap, @@ -1224,6 +1263,9 @@ static int rt286_i2c_probe(struct i2c_client *i2c, RT286_SET_GPIO_DATA, 0x40, 0x40); regmap_update_bits(rt286->regmap, RT286_GPIO_CTRL, 0xc, 0x8); + /* Workaound headphone crack noise when probing */ + regmap_write(rt286->regmap, RT286_SET_AMP_GAIN_HPO, + AMP_OUT_MUTE); } if (rt286->i2c->irq) { -- 2.12.0

2 3

[alsa-devel] [PATCH v2 1/3] dt-bindings: Document the dmas and dma-names properties for VC4 HDMI
by Eric Anholt 16 Mar '17

16 Mar '17

From: Boris Brezillon <boris.brezillon(a)free-electrons.com> These are optional, but necessary for HDMI audio support. Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Eric Anholt <eric(a)anholt.net> Acked-by: Rob Herring <robh(a)kernel.org> --- v2: no changes Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index 34c7fddcea39..ca02d3e4db91 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -34,6 +34,9 @@ Optional properties for HDMI: - hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear as an interrupt/status bit in the HDMI controller itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt +- dmas: Should contain one entry pointing to the DMA channel used to + transfer audio data +- dma-names: Should contain "audio-rx" Required properties for DPI: - compatible: Should be "brcm,bcm2835-dpi" -- 2.11.0

2 4

Re: [alsa-devel] [RFC PATCH 00/13] Introduce first class virtual address spaces
by Thomas Gleixner 16 Mar '17

16 Mar '17

On Wed, 15 Mar 2017, Till Smejkal wrote: > On Wed, 15 Mar 2017, Andy Lutomirski wrote: > > > VAS segments on the other side would provide a functionality to > > > achieve the same without the need of any mounted filesystem. However, > > > I agree, that this is just a small advantage compared to what can > > > already be achieved with the existing functionality provided by the > > > Linux kernel. > > > > I see this "small advantage" as "resource leak and security problem". > > I don't agree here. VAS segments are basically in-memory files that are > handled by the kernel directly without using a file system. Hence, if an Why do we need yet another mechanism to represent something which looks like a file instead of simply using existing mechanisms and extend them? Thanks, tglx

2 3

[alsa-devel] [PATCH] ASoC: rcar: dma: remove unnecessary "volatile"
by Kuninori Morimoto 16 Mar '17

16 Mar '17

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> commit 2a3af642eb20("ASoC: rcar: clear DE bit only in PDMACHCR...") added rsnd_dmapp_bset(), but it used copy-paste. Thus, it had unnecessary "volatile", and had below warning on x86. This patch fix it. sound/soc/sh/rcar/dma.c: In function 'rsnd_dmapp_bset': >> sound/soc/sh/rcar/dma.c:463:21: warning: passing argument 1 of \ 'ioread32' discards 'volatile' qualifier from pointer target \ type [-Wdiscarded-qualifiers] u32 val = ioread32(addr); ^~~~ In file included from arch/x86/include/asm/io.h:203:0, from arch/x86/include/asm/realmode.h:5, from arch/x86/include/asm/acpi.h:33, from arch/x86/include/asm/fixmap.h:19, from arch/x86/include/asm/apic.h:10, from arch/x86/include/asm/smp.h:12, from include/linux/smp.h:59, from include/linux/topology.h:33, from include/linux/gfp.h:8, from include/linux/idr.h:16, from include/linux/kernfs.h:14, from include/linux/sysfs.h:15, from include/linux/kobject.h:21, from include/linux/of.h:21, from include/linux/of_dma.h:16, from sound/soc/sh/rcar/dma.c:12: include/asm-generic/iomap.h:31:21: note: expected 'void *' \ but argument is of type 'volatile void *' extern unsigned int ioread32(void __iomem *); ^~~~~~~~ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/sh/rcar/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c index c2e199b..241cb3b 100644 --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -459,7 +459,7 @@ static void rsnd_dmapp_bset(struct rsnd_dma *dma, u32 data, u32 mask, u32 reg) struct rsnd_mod *mod = rsnd_mod_get(dma); struct rsnd_priv *priv = rsnd_mod_to_priv(mod); struct rsnd_dma_ctrl *dmac = rsnd_priv_to_dmac(priv); - volatile void __iomem *addr = rsnd_dmapp_addr(dmac, dma, reg); + void __iomem *addr = rsnd_dmapp_addr(dmac, dma, reg); u32 val = ioread32(addr); val &= ~mask; -- 1.9.1

2 1

[alsa-devel] [PATCH 1/2] ASoC: rt5665: fix define of RT5665_HP_DRIVER_5X
by Bard Liao 16 Mar '17

16 Mar '17

It is (0x3 << 2), not (0x2 << 2). Signed-off-by: Bard Liao <bardliao(a)realtek.com> --- sound/soc/codecs/rt5665.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5665.h b/sound/soc/codecs/rt5665.h index 12f7080..a30f5e6 100644 --- a/sound/soc/codecs/rt5665.h +++ b/sound/soc/codecs/rt5665.h @@ -1106,7 +1106,7 @@ #define RT5665_HP_DRIVER_MASK (0x3 << 2) #define RT5665_HP_DRIVER_1X (0x0 << 2) #define RT5665_HP_DRIVER_3X (0x1 << 2) -#define RT5665_HP_DRIVER_5X (0x2 << 2) +#define RT5665_HP_DRIVER_5X (0x3 << 2) #define RT5665_LDO1_DVO_MASK (0x3) #define RT5665_LDO1_DVO_09 (0x0) #define RT5665_LDO1_DVO_10 (0x1) -- 2.7.4

2 3

[alsa-devel] [PATCH 0/4] ASoC: simple-card: tidyup unreadable code
by Kuninori Morimoto 16 Mar '17

16 Mar '17

Hi Mark These are not a big deal, but tidyup/cleanup unreadable code on simple-card/simple-scu-card driver. Kuninori Morimoto (4): 1) ASoC: simple-card: use defined dev on probe() 2) ASoC: simple-scu-card: use defined dev on probe() 3) ASoC: simple-card: add new simple_priv_to_card() macro 4) ASoC: simple-scu-card: add new simple_priv_to_card() macro sound/soc/generic/simple-card.c | 43 +++++++++++++++++++++---------------- sound/soc/generic/simple-scu-card.c | 37 +++++++++++++++++-------------- 2 files changed, 45 insertions(+), 35 deletions(-) -- 1.9.1

2 8

[alsa-devel] [RFC PATCH 0/2] wm8960: Relax bit clock computation
by Daniel Baluta 16 Mar '17

16 Mar '17

This patch series allows running S20_3LE encoded samples on wm8960 codec. First patch does a small refactoring of sysclk frequency search because wm8960_configure_sysclk was getting pretty convoluted. The second patch allows relaxing bitclock computation in the way that if an exact bitclk couldn't be derived from sysclk it chooses the smalles available bitclk greater than the desired bitclk. For a better reviewing experience you can checked the squashed version of this patches here: http://pastebin.com/gBJ3DBSu Note that this is a follow up of: "ASoC: wm8960: Use physical width for bclk" discussion archived here: http://mailman.alsa-project.org/pipermail/alsa-devel/2017-March/118735.html Daniel Baluta (2): ASoC: codec: wm8960: Refactor sysclk freq search ASoC: codec: wm8960: Relax bit clock computation sound/soc/codecs/wm8960.c | 113 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 91 insertions(+), 22 deletions(-) -- 2.7.4

3 6