December 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [RFC v3 0/3] Enable HDA Codec support on Intel Platforms (Series1)
by Rakesh Ughreja 15 Dec '17

15 Dec '17

Enhanced HD Audio capabilities introduced in HD Audio controllers are added in backward compatible way i.e. it does not change the behavior of the controller with respect to HDA Bus and HDA devices. Since there is no change in the hardware with respect to the HDA bus and HDA device it is more appropriate to represent the same in software as well. In order to align software representation with hardware it makes more sense to have common data structures across device, bus and driver for both enhanced HDA controllers and legacy HDA controllers. This patch series removes the hdac_ext_device structure, hdac_ext_bus and hdac_ext_driver data structures so that legacy and enhanced HDaudio capabilities can be handled in a backwards-compatible way without separate definitions. Once this clean-up is complete, additional patches will allow for HDaudio codec support in an ASoC framework without the need to develop new codec drivers, thereby enabling the use of the Intel DSP on more platforms (currently limited to hdmi). Changes in v3: - No changes in this series except rebase as there were no comments. Changes in v2: - First three patches from v1 are merged so not included in this series. - No changes in this series except rebase as there were no comments. Rakesh Ughreja (3): ALSA: hdac: Remove usage of struct hdac_ext_device and use hdac_device instead ALSA: hdac: Remove usage of struct hdac_ext_bus and use hdac_bus instead ALSA: hdac: Remove usage of struct hdac_ext_driver, use hdac_driver instead include/sound/hdaudio.h | 21 ++ include/sound/hdaudio_ext.h | 119 +++------- sound/hda/ext/hdac_ext_bus.c | 76 +++--- sound/hda/ext/hdac_ext_controller.c | 55 +++-- sound/hda/ext/hdac_ext_stream.c | 104 ++++----- sound/soc/codecs/hdac_hdmi.c | 415 ++++++++++++++++----------------- sound/soc/intel/skylake/skl-messages.c | 50 ++-- sound/soc/intel/skylake/skl-nhlt.c | 8 +- sound/soc/intel/skylake/skl-pcm.c | 112 +++++---- sound/soc/intel/skylake/skl-topology.c | 18 +- sound/soc/intel/skylake/skl-topology.h | 6 +- sound/soc/intel/skylake/skl.c | 176 +++++++------- sound/soc/intel/skylake/skl.h | 7 +- 13 files changed, 521 insertions(+), 646 deletions(-) -- 2.7.4

1 3

[alsa-devel] Line6 Helix - usb compliant but not working correct
by Jens Verwiebe 14 Dec '17

14 Dec '17

Hi folks I recently got a Line6 Helix LT which can work usb compliant for example on OSX or IOS. No driver is needed but the samplerate is fixed to 48000 ( which is okay for the first ). Now i expected this device to work ootb in alsa, which turned out to be half the truth. Connecting the device threw " usb 7-2: parse_audio_format_rates_v2(): unable to retrieve number of sample rates (clock 16)" so i investigated a bit and found this workaround: --- "/media/Workdata3/Development/kernel_lowlat_4.4-97/linux-4.4.97/sound/usb/clock (Kopie).c" 2017-11-08 10:06:31.000000000 +0100 +++ /media/Workdata3/Development/kernel_lowlat_4.4-97/linux-4.4.97/sound/usb/clock.c 2017-11-14 23:06:51.750924051 +0100 @@ -361,6 +361,13 @@ static int set_sample_rate_v2(struct snd struct uac_clock_source_descriptor *cs_desc; clock = snd_usb_clock_find_source(chip, fmt->clock, true); + /* + * Line6 HELIX does not respond to sample rate + * set requests. The only valid rate is 48000. + */ + if (chip->usb_id == USB_ID(0x0e41, 0x4244) && rate == 48000) + return 0; + if (clock < 0) return clock; --- "/media/Workdata3/Development/kernel_lowlat_4.4-97/linux-4.4.97/sound/usb/format (Kopie).c" 2017-11-08 10:06:31.000000000 +0100 +++ /media/Workdata3/Development/kernel_lowlat_4.4-97/linux-4.4.97/sound/usb/format.c 2017-11-14 23:12:24.329766243 +0100 @@ -293,6 +293,20 @@ static int parse_audio_format_rates_v2(s int nr_triplets, data_size, ret = 0; int clock = snd_usb_clock_find_source(chip, fp->clock, false); + /* + * Line6 HELIX does not respond to sample rate + * query requests. The only valid rate is 48000. + */ + if (chip->usb_id == USB_ID(0x0e41, 0x4244)) { + fp->nr_rates = 1; + fp->rate_min = 48000; + fp->rate_max = 48000; + fp->rates = SNDRV_PCM_RATE_48000; + fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL); + fp->rate_table[0] = 48000; + return 0; + } + if (clock < 0) { dev_err(&dev->dev, "%s(): unable to find clock source (clock %d)\n", This trick made the device appear in aplay -l and /proc/asound just as expected. [ 7988.495085] usb 7-2: new high-speed USB device number 4 using xhci_hcd [ 7988.663622] usb 7-2: New USB device found, idVendor=0e41, idProduct=4244 [ 7988.663625] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7988.663627] usb 7-2: Product: HELIX [ 7988.663629] usb 7-2: Manufacturer: LINE 6 [ 7988.663630] usb 7-2: SerialNumber: 2744535 But i ended up with sometimes occuring soft clicks in playback which imply i have timing problems. Another symptom is aplay does not output any sound while not throwing any error while in jack i can create the driver just fine. I would apreciate any hint what i could try out here. Greetings from Hamburg ... Jens -- Jens Verwiebe Allerskehre 44 - 22309 Hamburg Tel.: +49 40 68 78 50 mobile: +49 172 400 49 07 mailto: info(a)jensverwiebe.de web: http://www.jensverwiebe.de

2 3

[alsa-devel] [PATCH v2 00/15] ASoC: qcom: Add support to QDSP6 based audio
by srinivas.kandagatla＠linaro.org 14 Dec '17

14 Dec '17

From: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> This patchset aims to provide a very basic version of QCOM DSP based audio support which is available in downstream andriod kernels. This patchset only support Digital audio based for HDMI-RX and will add support to other features as we move on. QDSP has both static and dynamic modules. static modules like AFE (Audio FrontEnd), ADM (Audio Device Manager), ASM(Audio Stream Manager) and CORE to provide this audio services. All these services use APR (Asynchronous Packet Router) protocol via smd/glink transport to communicate with Application processor. More details on each module is availble in there respective patch. This patchset is tested on DB820c, with HDMI audio playback on top of mainline, also tested slimbus analog audio using wcd9355 with an additional small patch. Here is block diagram to give a quick overview of the components +---------+ +---------+ +---------+ | q6asm | |q6routing| | q6afe | | fedai | <------> | mixers | <-----> | bedai | +---------+ +---------+ +---------+ ^ ^ ^ | | | | +------------------+----------------+ | | | | | | v v v v v +---------+ +---------+ +---------+ | q6ASM | | q6ADM | | q6AFE | +---------+ +---------+ +---------+ ^ ^ ^ ^ | | | CPU Side | ------+---------------------+-------------------+-------- | | | | |APR(smd/glink) | | | | | +------------------+----------------+ | | | | | | +-----+--+-----------------------------------+--+------- | | | | | QDSP Side | v v v v v v +---------+ +---------+ +---------+ | ASM | <------> | ADM | <-----> | AFE | +---------+ +---------+ +---------+ ^ | +-------------------+ | ---------------------------+-------------------------- | Audio I/O | v v +--------------------------------------------------+ | Audio devices | | CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...| | | +--------------------------------------------------+ Changes since RFC: - Converted APR driver to proper bus driver - Added API version info to apr devices - Added q6core driver. - Fixed various issues spotted by Banajit and Kasam. - Added kernel doc to exported symbols. - renamed qdsp6v2 to qdsp6 as api version info can be used from apr device. - removed unnecessary dt bindings for apr devices. Srinivas Kandagatla (15): dt-bindings: soc: qcom: Add bindings for APR bus soc: qcom: add support to APR bus driver ASoC: qcom: qdsp6: Add common qdsp6 helper functions ASoC: qcom: qdsp6: Add support to Q6AFE ASoC: qcom: qdsp6: Add support to Q6ADM ASoC: qcom: qdsp6: Add support to Q6ASM ASoC: qcom: q6asm: Add support to memory map and unmap ASoC: qcom: q6asm: add support to audio stream apis ASoC: qcom: qdsp6: Add support to Q6CORE ASoC: qcom: qdsp6: Add support to q6routing driver ASoC: qcom: qdsp6: Add support to q6afe dai driver ASoC: qcom: qdsp6: Add support to q6asm dai driver dt-bindings: sound: qcom: Add devicetree bindings for apq8096 ASoC: qcom: apq8096: Add db820c machine driver arm64: dts: msm8996: db820c: Add sound card support .../devicetree/bindings/soc/qcom/qcom,apr.txt | 28 + .../devicetree/bindings/sound/qcom,apq8096.txt | 22 + arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 5 + arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 + drivers/soc/qcom/Kconfig | 8 + drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/apr.c | 395 +++++++ include/linux/mod_devicetable.h | 13 + include/linux/soc/qcom/apr.h | 174 +++ sound/soc/qcom/Kconfig | 51 + sound/soc/qcom/Makefile | 5 + sound/soc/qcom/apq8096.c | 124 +++ sound/soc/qcom/qdsp6/Makefile | 7 + sound/soc/qcom/qdsp6/common.h | 225 ++++ sound/soc/qcom/qdsp6/q6adm.c | 602 +++++++++++ sound/soc/qcom/qdsp6/q6adm.h | 24 + sound/soc/qcom/qdsp6/q6afe-dai.c | 241 +++++ sound/soc/qcom/qdsp6/q6afe.c | 503 +++++++++ sound/soc/qcom/qdsp6/q6afe.h | 30 + sound/soc/qcom/qdsp6/q6asm-dai.c | 534 ++++++++++ sound/soc/qcom/qdsp6/q6asm.c | 1119 ++++++++++++++++++++ sound/soc/qcom/qdsp6/q6asm.h | 61 ++ sound/soc/qcom/qdsp6/q6core.c | 227 ++++ sound/soc/qcom/qdsp6/q6routing.c | 386 +++++++ sound/soc/qcom/qdsp6/q6routing.h | 9 + 25 files changed, 4827 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt create mode 100644 drivers/soc/qcom/apr.c create mode 100644 include/linux/soc/qcom/apr.h create mode 100644 sound/soc/qcom/apq8096.c create mode 100644 sound/soc/qcom/qdsp6/Makefile create mode 100644 sound/soc/qcom/qdsp6/common.h create mode 100644 sound/soc/qcom/qdsp6/q6adm.c create mode 100644 sound/soc/qcom/qdsp6/q6adm.h create mode 100644 sound/soc/qcom/qdsp6/q6afe-dai.c create mode 100644 sound/soc/qcom/qdsp6/q6afe.c create mode 100644 sound/soc/qcom/qdsp6/q6afe.h create mode 100644 sound/soc/qcom/qdsp6/q6asm-dai.c create mode 100644 sound/soc/qcom/qdsp6/q6asm.c create mode 100644 sound/soc/qcom/qdsp6/q6asm.h create mode 100644 sound/soc/qcom/qdsp6/q6core.c create mode 100644 sound/soc/qcom/qdsp6/q6routing.c create mode 100644 sound/soc/qcom/qdsp6/q6routing.h -- 2.15.0

4 20

[alsa-devel] [PATCH] ALSA: rawmidi: Avoid racy info ioctl via ctl device
by Takashi Iwai 14 Dec '17

14 Dec '17

The rawmidi also allows to obtaining the information via ioctl of ctl API. It means that user can issue an ioctl to the rawmidi device even when it's being removed as long as the control device is present. Although the code has some protection via the global register_mutex, its range is limited to the search of the corresponding rawmidi object, and the mutex is already unlocked at accessing the rawmidi object. This may lead to a use-after-free. For avoiding it, this patch widens the application of register_mutex to the whole snd_rawmidi_info_select() function. We have another mutex per rawmidi object, but this operation isn't very hot path, so it shouldn't matter from the performance POV. Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/rawmidi.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index b3b353d72527..f055ca10bbc1 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -579,15 +579,14 @@ static int snd_rawmidi_info_user(struct snd_rawmidi_substream *substream, return 0; } -int snd_rawmidi_info_select(struct snd_card *card, struct snd_rawmidi_info *info) +static int __snd_rawmidi_info_select(struct snd_card *card, + struct snd_rawmidi_info *info) { struct snd_rawmidi *rmidi; struct snd_rawmidi_str *pstr; struct snd_rawmidi_substream *substream; - mutex_lock(&register_mutex); rmidi = snd_rawmidi_search(card, info->device); - mutex_unlock(&register_mutex); if (!rmidi) return -ENXIO; if (info->stream < 0 || info->stream > 1) @@ -603,6 +602,16 @@ int snd_rawmidi_info_select(struct snd_card *card, struct snd_rawmidi_info *info } return -ENXIO; } + +int snd_rawmidi_info_select(struct snd_card *card, struct snd_rawmidi_info *info) +{ + int ret; + + mutex_lock(&register_mutex); + ret = __snd_rawmidi_info_select(card, info); + mutex_unlock(&register_mutex); + return ret; +} EXPORT_SYMBOL(snd_rawmidi_info_select); static int snd_rawmidi_info_select_user(struct snd_card *card, -- 2.15.1

1 0

[alsa-devel] [PATCH v4 0/5] TDA1997x HDMI video receiver
by Tim Harvey 14 Dec '17

14 Dec '17

This is a v4l2 subdev driver supporting the TDA1997x HDMI video receiver. I've tested this on a Gateworks GW54xx/GW551x with an IMX6Q which uses the TDA19971 with 16bits connected to the IMX6 CSI. For this configuration I've tested both 16bit YUV422 and 8bit BT656 parallel video bus modes. While the driver should support the TDA1993 I do not have one for testing. Further potential development efforts include: - CEC support - HDCP support - mbus format selection support for bus widths that support multiple formats - TDA19972 support (2 inputs) Media graphs can be found at http://dev.gateworks.com/docs/linux/media History: v4: - move include/dt-bindings/media/tda1997x.h to bindings patch - clarify port node details in bindings - fix typos - fix default quant range for VGA - fix quant range handling and conv matrix - add additional standards and capabilities to timings_cap v3: - fix typo in dt bindings - added dt bindings for GW551x - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros - fixed missing break - use only hdmi_infoframe_log for infoframe logging - simplify tda1997x_s_stream error handling - add delayed work proc to handle hotplug enable/disable - fix set_edid (disable HPD before writing, enable after) - remove enabling edid by default - initialize timings - take quant range into account in colorspace conversion - remove vendor/product tracking (we provide this in log_status via infoframes) - add v4l_controls - add more detail to log_status - calculate vhref generator timings - timing detection fixes (rounding errors, hswidth errors) - rename configure_input/configure_conv functions v2: - encorporate feedback into dt bindings - change audio dt bindings - implement dv timings enum/cap - remove deprecated g_mbus_config op - fix dv_query_timings - add EDID get/set handling - remove max-pixel-rate support - add audio codec DAI support - added media-ctl and v4l2-compliance details v1: - initial RFC Media device topology: # media-ctl -d /dev/media0 -p Media controller API version 4.13.0 Media device information ------------------------ driver imx-media model imx-media serial bus info hw revision 0x0 driver version 4.13.0 Device topology - entity 1: adv7180 2-0020 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 20004 device node name /dev/v4l-subdev0 pad0: Source [fmt:UYVY8_2X8/720x480 field:interlaced colorspace:smpte170m] -> "ipu2_csi1_mux":1 [] - entity 3: tda19971 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev1 pad0: Source [fmt:UYVY8_1X16/640x480 field:none colorspace:srgb] [dv.caps:BT.656/1120 min:640x480@13000000 max:1920x1080@165000000 stds:CEA-861,DMT caps:progressive] [dv.detect:BT.656/1120 640x480p59 (800x525) stds:CEA-861,DMT flags:has-cea861-vic] [dv.current:BT.656/1120 1920x1080p60 (2200x1125) stds:CEA-861,DMT flags:can-reduce-fps,CE-video,has-cea861-vic] -> "ipu1_csi0_mux":1 [] - entity 5: ipu1_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev2 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] - entity 9: ipu2_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev3 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] - entity 13: ipu1_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev4 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_vdic":2 [] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf":0 [] - entity 17: ipu1_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev5 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc capture":0 [] - entity 20: ipu1_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0: Sink <- "ipu1_ic_prpenc":1 [] - entity 26: ipu1_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev6 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf capture":0 [] - entity 29: ipu1_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0: Sink <- "ipu1_ic_prpvf":1 [] - entity 35: ipu2_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev7 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_vdic":2 [] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf":0 [] - entity 39: ipu2_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev8 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc capture":0 [] - entity 42: ipu2_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0: Sink <- "ipu2_ic_prpenc":1 [] - entity 48: ipu2_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev9 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf capture":0 [] - entity 51: ipu2_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0: Sink <- "ipu2_ic_prpvf":1 [] - entity 57: ipu1_csi0 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev10 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu1_csi0_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi0 capture":0 [] - entity 61: ipu1_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0: Sink <- "ipu1_csi0":2 [] - entity 67: ipu1_csi1 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev11 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi1 capture":0 [] - entity 71: ipu1_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0: Sink <- "ipu1_csi1":2 [] - entity 77: ipu2_csi0 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev12 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi0 capture":0 [] - entity 81: ipu2_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0: Sink <- "ipu2_csi0":2 [] - entity 87: ipu2_csi1 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev13 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu2_csi1_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi1 capture":0 [] - entity 91: ipu2_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0: Sink <- "ipu2_csi1":2 [] - entity 97: ipu1_csi0_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev14 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "tda19971 2-0048":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu1_csi0":0 [] - entity 101: ipu2_csi1_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev15 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "adv7180 2-0020":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu2_csi1":0 [] v4l2-compliance test results: (on /dev/video6 as v4l2-compliance doesn't yet support subdevs) Driver Info: Driver name : imx-media-captu Card type : imx-media-capture Bus info : platform:ipu2_csi0 Driver version: 4.13.0 Capabilities : 0x84200001 Video Capture Streaming Extended Pix Format Device Capabilities Device Caps : 0x04200001 Video Capture Streaming Extended Pix Format Compliance test for device /dev/video6 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second video open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) fail: v4l2-test-input-output.cpp(418): G_INPUT not supported for a capture device test VIDIOC_G/S/ENUMINPUT: FAIL test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK fail: v4l2-test-controls.cpp(574): g_ext_ctrls does not support count == 0 test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK Test input 0: Total: 42, Succeeded: 40, Failed: 2, Warnings: 0 Tim Harvey (5): MAINTAINERS: add entry for NXP TDA1997x driver media: dt-bindings: Add bindings for TDA1997X media: i2c: Add TDA1997x HDMI receiver driver ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x .../devicetree/bindings/media/i2c/tda1997x.txt | 179 + MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-gw54xx.dts | 102 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 85 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 3516 ++++++++++++++++++++ include/dt-bindings/media/tda1997x.h | 78 + include/media/i2c/tda1997x.h | 53 + 10 files changed, 4057 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tda1997x.txt create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h -- 2.7.4

4 11

[alsa-devel] [alsa-lib][PATCH v3 4/4] pcm: plug: add SND_PCM_FORMAT_{S, U}20 to linear_preferred_formats
by Maciej S. Szmigiero 14 Dec '17

14 Dec '17

This commit adds the recently added formats SND_PCM_FORMAT_{S,U}20 to the linear_preferred_formats array in pcm_plug. Let's give them lower priority than more standard S24 formats but a higher priority than less typical 3-byte versions. Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> --- src/pcm/pcm_plug.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/src/pcm/pcm_plug.c b/src/pcm/pcm_plug.c index f1d7792db709..abf6f1ab9751 100644 --- a/src/pcm/pcm_plug.c +++ b/src/pcm/pcm_plug.c @@ -138,6 +138,17 @@ static const snd_pcm_format_t linear_preferred_formats[] = { SND_PCM_FORMAT_S24_LE, SND_PCM_FORMAT_U24_LE, #endif +#ifdef SND_LITTLE_ENDIAN + SND_PCM_FORMAT_S20_LE, + SND_PCM_FORMAT_U20_LE, + SND_PCM_FORMAT_S20_BE, + SND_PCM_FORMAT_U20_BE, +#else + SND_PCM_FORMAT_S20_BE, + SND_PCM_FORMAT_U20_BE, + SND_PCM_FORMAT_S20_LE, + SND_PCM_FORMAT_U20_LE, +#endif #ifdef SND_LITTLE_ENDIAN SND_PCM_FORMAT_S24_3LE, SND_PCM_FORMAT_U24_3LE,

1 0

[alsa-devel] [alsa-lib][PATCH v3 3/4] pcm: linear, route: handle linear formats with 20-bit sample on 4 bytes
by Maciej S. Szmigiero 14 Dec '17

14 Dec '17

The previous patch has added 20-bit PCM formats SND_PCM_FORMAT_{S,U}20 to alsa-lib. We need to extend the linear format conversion code with handling of these sample formats so they can also be utilized by applications that only recognize the more typical ones like SND_PCM_FORMAT_S16. Since the conversion arrays are indexed by a format bit width divided by 8 the easiest way to handle these formats is to treat them like they were 40-bit wide (the next free integer multiple of 8 bits). This doesn't create a collision risk with a future format since there can't really be a 40-bit sample format that occupies 4 bytes. Make sure we use the getput conversion method for these formats since a direct conversion from / to them is not supported. Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> --- src/pcm/pcm_linear.c | 14 +++++++++++--- src/pcm/pcm_route.c | 6 ++++-- src/pcm/plugin_ops.h | 50 ++++++++++++++++++++++++++++++++++++++++++++++---- 3 files changed, 61 insertions(+), 9 deletions(-) diff --git a/src/pcm/pcm_linear.c b/src/pcm/pcm_linear.c index 0d61e927323f..33e7fc4578f3 100644 --- a/src/pcm/pcm_linear.c +++ b/src/pcm/pcm_linear.c @@ -100,8 +100,11 @@ int snd_pcm_linear_get_index(snd_pcm_format_t src_format, snd_pcm_format_t dst_f default: width = 2; break; } - return width * 4 + endian * 2 + sign + 16; + return width * 4 + endian * 2 + sign + 20; } else { + if (width == 20) + width = 40; + width = width / 8 - 1; return width * 4 + endian * 2 + sign; } @@ -131,8 +134,11 @@ int snd_pcm_linear_put_index(snd_pcm_format_t src_format, snd_pcm_format_t dst_f default: width = 2; break; } - return width * 4 + endian * 2 + sign + 16; + return width * 4 + endian * 2 + sign + 20; } else { + if (width == 20) + width = 40; + width = width / 8 - 1; return width * 4 + endian * 2 + sign; } @@ -303,7 +309,9 @@ static int snd_pcm_linear_hw_params(snd_pcm_t *pcm, snd_pcm_hw_params_t *params) if (err < 0) return err; linear->use_getput = (snd_pcm_format_physical_width(format) == 24 || - snd_pcm_format_physical_width(linear->sformat) == 24); + snd_pcm_format_physical_width(linear->sformat) == 24 || + snd_pcm_format_width(format) == 20 || + snd_pcm_format_width(linear->sformat) == 20); if (linear->use_getput) { if (pcm->stream == SND_PCM_STREAM_PLAYBACK) { linear->get_idx = snd_pcm_linear_get_index(format, SND_PCM_FORMAT_S32); diff --git a/src/pcm/pcm_route.c b/src/pcm/pcm_route.c index 1f485a8e79f9..bbcc6118b593 100644 --- a/src/pcm/pcm_route.c +++ b/src/pcm/pcm_route.c @@ -565,10 +565,12 @@ static int snd_pcm_route_hw_params(snd_pcm_t *pcm, snd_pcm_hw_params_t * params) } if (err < 0) return err; - /* 3 bytes formats? */ + /* 3 bytes or 20-bit formats? */ route->params.use_getput = (snd_pcm_format_physical_width(src_format) + 7) / 8 == 3 || - (snd_pcm_format_physical_width(dst_format) + 7) / 8 == 3; + (snd_pcm_format_physical_width(dst_format) + 7) / 8 == 3 || + snd_pcm_format_width(src_format) == 20 || + snd_pcm_format_width(dst_format) == 20; route->params.get_idx = snd_pcm_linear_get_index(src_format, SND_PCM_FORMAT_S32); route->params.put_idx = snd_pcm_linear_put_index(SND_PCM_FORMAT_S32, dst_format); route->params.conv_idx = snd_pcm_linear_convert_index(src_format, dst_format); diff --git a/src/pcm/plugin_ops.h b/src/pcm/plugin_ops.h index 5a6016adb13a..a784d9c2b320 100644 --- a/src/pcm/plugin_ops.h +++ b/src/pcm/plugin_ops.h @@ -21,6 +21,12 @@ #ifndef SX_INLINES #define SX_INLINES +static inline uint32_t sx20(uint32_t x) +{ + if(x&0x00080000) + return x|0xFFF00000; + return x&0x000FFFFF; +} static inline uint32_t sx24(uint32_t x) { if(x&0x00800000) @@ -341,7 +347,7 @@ conv_1234_123C: as_u32(dst) = as_u32c(src) ^ 0x80; goto CONV_END; #ifdef GET16_LABELS /* src_wid src_endswap sign_toggle */ -static void *const get16_labels[4 * 2 * 2 + 4 * 3] = { +static void *const get16_labels[5 * 2 * 2 + 4 * 3] = { &&get16_1_10, /* 8h -> 16h */ &&get16_1_90, /* 8h ^> 16h */ &&get16_1_10, /* 8s -> 16h */ @@ -350,6 +356,7 @@ static void *const get16_labels[4 * 2 * 2 + 4 * 3] = { &&get16_12_92, /* 16h ^> 16h */ &&get16_12_21, /* 16s -> 16h */ &&get16_12_A1, /* 16s ^> 16h */ + /* 4 byte formats */ &&get16_0123_12, /* 24h -> 16h */ &&get16_0123_92, /* 24h ^> 16h */ &&get16_1230_32, /* 24s -> 16h */ @@ -358,6 +365,10 @@ static void *const get16_labels[4 * 2 * 2 + 4 * 3] = { &&get16_1234_92, /* 32h ^> 16h */ &&get16_1234_43, /* 32s -> 16h */ &&get16_1234_C3, /* 32s ^> 16h */ + &&get16_0123_12_20, /* 20h -> 16h */ + &&get16_0123_92_20, /* 20h ^> 16h */ + &&get16_1230_32_20, /* 20s -> 16h */ + &&get16_1230_B2_20, /* 20s ^> 16h */ /* 3bytes format */ &&get16_123_12, /* 24h -> 16h */ &&get16_123_92, /* 24h ^> 16h */ @@ -390,6 +401,10 @@ get16_1234_12: sample = as_u32c(src) >> 16; goto GET16_END; get16_1234_92: sample = (as_u32c(src) >> 16) ^ 0x8000; goto GET16_END; get16_1234_43: sample = bswap_16(as_u32c(src)); goto GET16_END; get16_1234_C3: sample = bswap_16(as_u32c(src) ^ 0x80); goto GET16_END; +get16_0123_12_20: sample = as_u32c(src) >> 4; goto GET16_END; +get16_0123_92_20: sample = (as_u32c(src) >> 4) ^ 0x8000; goto GET16_END; +get16_1230_32_20: sample = bswap_32(as_u32c(src)) >> 4; goto GET16_END; +get16_1230_B2_20: sample = (bswap_32(as_u32c(src)) >> 4) ^ 0x8000; goto GET16_END; get16_123_12: sample = _get_triple(src) >> 8; goto GET16_END; get16_123_92: sample = (_get_triple(src) >> 8) ^ 0x8000; goto GET16_END; get16_123_32: sample = _get_triple_s(src) >> 8; goto GET16_END; @@ -407,7 +422,7 @@ get16_123_B2_18: sample = (_get_triple_s(src) >> 2) ^ 0x8000; goto GET16_END; #ifdef PUT16_LABELS /* dst_wid dst_endswap sign_toggle */ -static void *const put16_labels[4 * 2 * 2 + 4 * 3] = { +static void *const put16_labels[5 * 2 * 2 + 4 * 3] = { &&put16_12_1, /* 16h -> 8h */ &&put16_12_9, /* 16h ^> 8h */ &&put16_12_1, /* 16h -> 8s */ @@ -416,6 +431,7 @@ static void *const put16_labels[4 * 2 * 2 + 4 * 3] = { &&put16_12_92, /* 16h ^> 16h */ &&put16_12_21, /* 16h -> 16s */ &&put16_12_29, /* 16h ^> 16s */ + /* 4 byte formats */ &&put16_12_0120, /* 16h -> 24h */ &&put16_12_0920, /* 16h ^> 24h */ &&put16_12_0210, /* 16h -> 24s */ @@ -424,6 +440,10 @@ static void *const put16_labels[4 * 2 * 2 + 4 * 3] = { &&put16_12_9200, /* 16h ^> 32h */ &&put16_12_0021, /* 16h -> 32s */ &&put16_12_0029, /* 16h ^> 32s */ + &&put16_12_0120_20, /* 16h -> 20h */ + &&put16_12_0920_20, /* 16h ^> 20h */ + &&put16_12_0210_20, /* 16h -> 20s */ + &&put16_12_0290_20, /* 16h ^> 20s */ /* 3bytes format */ &&put16_12_120, /* 16h -> 24h */ &&put16_12_920, /* 16h ^> 24h */ @@ -456,6 +476,10 @@ put16_12_1200: as_u32(dst) = (uint32_t)sample << 16; goto PUT16_END; put16_12_9200: as_u32(dst) = (uint32_t)(sample ^ 0x8000) << 16; goto PUT16_END; put16_12_0021: as_u32(dst) = (uint32_t)bswap_16(sample); goto PUT16_END; put16_12_0029: as_u32(dst) = (uint32_t)bswap_16(sample) ^ 0x80; goto PUT16_END; +put16_12_0120_20: as_u32(dst) = sx20((uint32_t)sample << 4); goto PUT16_END; +put16_12_0920_20: as_u32(dst) = sx20((uint32_t)(sample ^ 0x8000) << 4); goto PUT16_END; +put16_12_0210_20: as_u32(dst) = bswap_32(sx20((uint32_t)sample << 4)); goto PUT16_END; +put16_12_0290_20: as_u32(dst) = bswap_32(sx20((uint32_t)(sample ^ 0x8000) << 4)); goto PUT16_END; put16_12_120: _put_triple(dst, (uint32_t)sample << 8); goto PUT16_END; put16_12_920: _put_triple(dst, (uint32_t)(sample ^ 0x8000) << 8); goto PUT16_END; put16_12_021: _put_triple_s(dst, (uint32_t)sample << 8); goto PUT16_END; @@ -478,7 +502,7 @@ put16_12_029_18: _put_triple_s(dst, (uint32_t)(sample ^ 0x8000) << 2); goto PUT1 #ifdef GET32_LABELS /* src_wid src_endswap sign_toggle */ -static void *const get32_labels[4 * 2 * 2 + 4 * 3] = { +static void *const get32_labels[5 * 2 * 2 + 4 * 3] = { &&get32_1_1000, /* 8h -> 32h */ &&get32_1_9000, /* 8h ^> 32h */ &&get32_1_1000, /* 8s -> 32h */ @@ -487,6 +511,7 @@ static void *const get32_labels[4 * 2 * 2 + 4 * 3] = { &&get32_12_9200, /* 16h ^> 32h */ &&get32_12_2100, /* 16s -> 32h */ &&get32_12_A100, /* 16s ^> 32h */ + /* 4 byte formats */ &&get32_0123_1230, /* 24h -> 32h */ &&get32_0123_9230, /* 24h ^> 32h */ &&get32_1230_3210, /* 24s -> 32h */ @@ -495,6 +520,10 @@ static void *const get32_labels[4 * 2 * 2 + 4 * 3] = { &&get32_1234_9234, /* 32h ^> 32h */ &&get32_1234_4321, /* 32s -> 32h */ &&get32_1234_C321, /* 32s ^> 32h */ + &&get32_0123_1230_20, /* 20h -> 32h */ + &&get32_0123_9230_20, /* 20h ^> 32h */ + &&get32_1230_3210_20, /* 20s -> 32h */ + &&get32_1230_B210_20, /* 20s ^> 32h */ /* 3bytes format */ &&get32_123_1230, /* 24h -> 32h */ &&get32_123_9230, /* 24h ^> 32h */ @@ -531,6 +560,10 @@ get32_1234_1234: sample = as_u32c(src); goto GET32_END; get32_1234_9234: sample = as_u32c(src) ^ 0x80000000; goto GET32_END; get32_1234_4321: sample = bswap_32(as_u32c(src)); goto GET32_END; get32_1234_C321: sample = bswap_32(as_u32c(src) ^ 0x80); goto GET32_END; +get32_0123_1230_20: sample = as_u32c(src) << 12; goto GET32_END; +get32_0123_9230_20: sample = (as_u32c(src) << 12) ^ 0x80000000; goto GET32_END; +get32_1230_3210_20: sample = bswap_32(as_u32c(src)) << 12; goto GET32_END; +get32_1230_B210_20: sample = (bswap_32(as_u32c(src)) << 12) ^ 0x80000000; goto GET32_END; get32_123_1230: sample = _get_triple(src) << 8; goto GET32_END; get32_123_9230: sample = (_get_triple(src) << 8) ^ 0x80000000; goto GET32_END; get32_123_3210: sample = _get_triple_s(src) << 8; goto GET32_END; @@ -553,7 +586,7 @@ __conv24_get: goto *put; #ifdef PUT32_LABELS /* dst_wid dst_endswap sign_toggle */ -static void *const put32_labels[4 * 2 * 2 + 4 * 3] = { +static void *const put32_labels[5 * 2 * 2 + 4 * 3] = { &&put32_1234_1, /* 32h -> 8h */ &&put32_1234_9, /* 32h ^> 8h */ &&put32_1234_1, /* 32h -> 8s */ @@ -562,6 +595,7 @@ static void *const put32_labels[4 * 2 * 2 + 4 * 3] = { &&put32_1234_92, /* 32h ^> 16h */ &&put32_1234_21, /* 32h -> 16s */ &&put32_1234_29, /* 32h ^> 16s */ + /* 4 byte formats */ &&put32_1234_0123, /* 32h -> 24h */ &&put32_1234_0923, /* 32h ^> 24h */ &&put32_1234_3210, /* 32h -> 24s */ @@ -570,6 +604,10 @@ static void *const put32_labels[4 * 2 * 2 + 4 * 3] = { &&put32_1234_9234, /* 32h ^> 32h */ &&put32_1234_4321, /* 32h -> 32s */ &&put32_1234_4329, /* 32h ^> 32s */ + &&put32_1234_0123_20, /* 32h -> 20h */ + &&put32_1234_0923_20, /* 32h ^> 20h */ + &&put32_1234_3210_20, /* 32h -> 20s */ + &&put32_1234_3290_20, /* 32h ^> 20s */ /* 3bytes format */ &&put32_1234_123, /* 32h -> 24h */ &&put32_1234_923, /* 32h ^> 24h */ @@ -607,6 +645,10 @@ put32_1234_1234: as_u32(dst) = sample; goto PUT32_END; put32_1234_9234: as_u32(dst) = sample ^ 0x80000000; goto PUT32_END; put32_1234_4321: as_u32(dst) = bswap_32(sample); goto PUT32_END; put32_1234_4329: as_u32(dst) = bswap_32(sample) ^ 0x80; goto PUT32_END; +put32_1234_0123_20: as_u32(dst) = sx20(sample >> 12); goto PUT32_END; +put32_1234_0923_20: as_u32(dst) = sx20((sample ^ 0x80000000) >> 12); goto PUT32_END; +put32_1234_3210_20: as_u32(dst) = bswap_32(sx20(sample >> 12)); goto PUT32_END; +put32_1234_3290_20: as_u32(dst) = bswap_32(sx20((sample ^ 0x80000000) >> 12)); goto PUT32_END; put32_1234_123: _put_triple(dst, sample >> 8); goto PUT32_END; put32_1234_923: _put_triple(dst, (sample ^ 0x80000000) >> 8); goto PUT32_END; put32_1234_321: _put_triple_s(dst, sample >> 8); goto PUT32_END;

1 0

[alsa-devel] [alsa-lib][PATCH v3 2/4] pcm: add and describe SND_PCM_FORMAT_{S, U}20
by Maciej S. Szmigiero 14 Dec '17

14 Dec '17

This patch adds and describes in various functions that query format properties SND_PCM_FORMAT_{S,U}20 formats that were recently added to the kernel as SNDRV_PCM_FORMAT_{S,U}20. These formats are similar to existing 20-bit PCM formats SND_PCM_FORMAT_{S,U}20_3, however they occupy 4 bytes instead of 3. Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> --- include/pcm.h | 20 ++++++++++++++++++-- src/pcm/pcm.c | 10 ++++++++++ src/pcm/pcm_local.h | 4 ++++ src/pcm/pcm_misc.c | 41 ++++++++++++++++++++++++++++++++++++++--- 4 files changed, 70 insertions(+), 5 deletions(-) diff --git a/include/pcm.h b/include/pcm.h index e05777a7c221..2619c8cd8bd4 100644 --- a/include/pcm.h +++ b/include/pcm.h @@ -175,6 +175,14 @@ typedef enum _snd_pcm_format { SND_PCM_FORMAT_MPEG, /** GSM */ SND_PCM_FORMAT_GSM, + /** Signed 20bit Little Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_S20_LE, + /** Signed 20bit Big Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_S20_BE, + /** Unsigned 20bit Little Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_U20_LE, + /** Unsigned 20bit Big Endian in 4bytes format, LSB justified */ + SND_PCM_FORMAT_U20_BE, /** Special */ SND_PCM_FORMAT_SPECIAL = 31, /** Signed 24bit Little Endian in 3bytes format */ @@ -239,7 +247,11 @@ typedef enum _snd_pcm_format { /** Float 64 bit CPU endian */ SND_PCM_FORMAT_FLOAT64 = SND_PCM_FORMAT_FLOAT64_LE, /** IEC-958 CPU Endian */ - SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_LE + SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_LE, + /** Signed 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_S20 = SND_PCM_FORMAT_S20_LE, + /** Unsigned 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_U20 = SND_PCM_FORMAT_U20_LE, #elif __BYTE_ORDER == __BIG_ENDIAN /** Signed 16 bit CPU endian */ SND_PCM_FORMAT_S16 = SND_PCM_FORMAT_S16_BE, @@ -258,7 +270,11 @@ typedef enum _snd_pcm_format { /** Float 64 bit CPU endian */ SND_PCM_FORMAT_FLOAT64 = SND_PCM_FORMAT_FLOAT64_BE, /** IEC-958 CPU Endian */ - SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_BE + SND_PCM_FORMAT_IEC958_SUBFRAME = SND_PCM_FORMAT_IEC958_SUBFRAME_BE, + /** Signed 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_S20 = SND_PCM_FORMAT_S20_BE, + /** Unsigned 20bit in 4bytes format, LSB justified, CPU Endian */ + SND_PCM_FORMAT_U20 = SND_PCM_FORMAT_U20_BE, #else #error "Unknown endian" #endif diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 1efb8b9d4e8c..e9ebf383c31b 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -1780,6 +1780,10 @@ static const char *const snd_pcm_format_names[] = { FORMAT(IMA_ADPCM), FORMAT(MPEG), FORMAT(GSM), + FORMAT(S20_LE), + FORMAT(S20_BE), + FORMAT(U20_LE), + FORMAT(U20_BE), FORMAT(SPECIAL), FORMAT(S24_3LE), FORMAT(S24_3BE), @@ -1814,6 +1818,8 @@ static const char *const snd_pcm_format_aliases[SND_PCM_FORMAT_LAST+1] = { FORMAT(FLOAT), FORMAT(FLOAT64), FORMAT(IEC958_SUBFRAME), + FORMAT(S20), + FORMAT(U20), }; static const char *const snd_pcm_format_descriptions[] = { @@ -1842,6 +1848,10 @@ static const char *const snd_pcm_format_descriptions[] = { FORMATD(IMA_ADPCM, "Ima-ADPCM"), FORMATD(MPEG, "MPEG"), FORMATD(GSM, "GSM"), + FORMATD(S20_LE, "Signed 20 bit Little Endian in 4 bytes, LSB justified"), + FORMATD(S20_BE, "Signed 20 bit Big Endian in 4 bytes, LSB justified"), + FORMATD(U20_LE, "Unsigned 20 bit Little Endian in 4 bytes, LSB justified"), + FORMATD(U20_BE, "Unsigned 20 bit Big Endian in 4 bytes, LSB justified"), FORMATD(SPECIAL, "Special"), FORMATD(S24_3LE, "Signed 24 bit Little Endian in 3bytes"), FORMATD(S24_3BE, "Signed 24 bit Big Endian in 3bytes"), diff --git a/src/pcm/pcm_local.h b/src/pcm/pcm_local.h index 776f8cd3e302..3d95e1749169 100644 --- a/src/pcm/pcm_local.h +++ b/src/pcm/pcm_local.h @@ -984,6 +984,10 @@ const snd_config_t *snd_pcm_rate_get_default_converter(snd_config_t *root); (1U << SND_PCM_FORMAT_S16_BE) | \ (1U << SND_PCM_FORMAT_U16_LE) | \ (1U << SND_PCM_FORMAT_U16_BE) | \ + (1U << SND_PCM_FORMAT_S20_LE) | \ + (1U << SND_PCM_FORMAT_S20_BE) | \ + (1U << SND_PCM_FORMAT_U20_LE) | \ + (1U << SND_PCM_FORMAT_U20_BE) | \ (1U << SND_PCM_FORMAT_S24_LE) | \ (1U << SND_PCM_FORMAT_S24_BE) | \ (1U << SND_PCM_FORMAT_U24_LE) | \ diff --git a/src/pcm/pcm_misc.c b/src/pcm/pcm_misc.c index 5420b1895713..7ee0dac771af 100644 --- a/src/pcm/pcm_misc.c +++ b/src/pcm/pcm_misc.c @@ -38,6 +38,8 @@ int snd_pcm_format_signed(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_S8: case SNDRV_PCM_FORMAT_S16_LE: case SNDRV_PCM_FORMAT_S16_BE: + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_S32_LE: @@ -52,6 +54,8 @@ int snd_pcm_format_signed(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_U8: case SNDRV_PCM_FORMAT_U16_LE: case SNDRV_PCM_FORMAT_U16_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_U24_LE: case SNDRV_PCM_FORMAT_U24_BE: case SNDRV_PCM_FORMAT_U32_LE: @@ -126,6 +130,8 @@ int snd_pcm_format_little_endian(snd_pcm_format_t format) switch (format) { case SNDRV_PCM_FORMAT_S16_LE: case SNDRV_PCM_FORMAT_U16_LE: + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_U20_LE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_U24_LE: case SNDRV_PCM_FORMAT_S32_LE: @@ -144,6 +150,8 @@ int snd_pcm_format_little_endian(snd_pcm_format_t format) return 1; case SNDRV_PCM_FORMAT_S16_BE: case SNDRV_PCM_FORMAT_U16_BE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_U24_BE: case SNDRV_PCM_FORMAT_S32_BE: @@ -218,6 +226,10 @@ int snd_pcm_format_width(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_U18_3LE: case SNDRV_PCM_FORMAT_U18_3BE: return 18; + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S20_3LE: case SNDRV_PCM_FORMAT_S20_3BE: case SNDRV_PCM_FORMAT_U20_3LE: @@ -289,6 +301,10 @@ int snd_pcm_format_physical_width(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_U24_3LE: case SNDRV_PCM_FORMAT_U24_3BE: return 24; + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_U24_LE: @@ -350,6 +366,10 @@ ssize_t snd_pcm_format_size(snd_pcm_format_t format, size_t samples) case SNDRV_PCM_FORMAT_U24_3LE: case SNDRV_PCM_FORMAT_U24_3BE: return samples * 3; + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: + case SNDRV_PCM_FORMAT_U20_LE: + case SNDRV_PCM_FORMAT_U20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_U24_LE: @@ -393,6 +413,8 @@ uint64_t snd_pcm_format_silence_64(snd_pcm_format_t format) case SNDRV_PCM_FORMAT_S8: case SNDRV_PCM_FORMAT_S16_LE: case SNDRV_PCM_FORMAT_S16_BE: + case SNDRV_PCM_FORMAT_S20_LE: + case SNDRV_PCM_FORMAT_S20_BE: case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S24_BE: case SNDRV_PCM_FORMAT_S32_LE: @@ -415,12 +437,16 @@ uint64_t snd_pcm_format_silence_64(snd_pcm_format_t format) #ifdef SNDRV_LITTLE_ENDIAN case SNDRV_PCM_FORMAT_U16_LE: return 0x8000800080008000ULL; + case SNDRV_PCM_FORMAT_U20_LE: + return 0x0008000000080000ULL; case SNDRV_PCM_FORMAT_U24_LE: return 0x0080000000800000ULL; case SNDRV_PCM_FORMAT_U32_LE: return 0x8000000080000000ULL; case SNDRV_PCM_FORMAT_U16_BE: return 0x0080008000800080ULL; + case SNDRV_PCM_FORMAT_U20_BE: + return 0x0000080000000800ULL; case SNDRV_PCM_FORMAT_U24_BE: return 0x0000800000008000ULL; case SNDRV_PCM_FORMAT_U32_BE: @@ -440,12 +466,16 @@ uint64_t snd_pcm_format_silence_64(snd_pcm_format_t format) #else case SNDRV_PCM_FORMAT_U16_LE: return 0x0080008000800080ULL; + case SNDRV_PCM_FORMAT_U20_LE: + return 0x0000080000000800ULL; case SNDRV_PCM_FORMAT_U24_LE: return 0x0000800000008000ULL; case SNDRV_PCM_FORMAT_U32_LE: return 0x0000008000000080ULL; case SNDRV_PCM_FORMAT_U16_BE: return 0x8000800080008000ULL; + case SNDRV_PCM_FORMAT_U20_BE: + return 0x0008000000080000ULL; case SNDRV_PCM_FORMAT_U24_BE: return 0x0080000000800000ULL; case SNDRV_PCM_FORMAT_U32_BE: @@ -653,11 +683,13 @@ int snd_pcm_format_set_silence(snd_pcm_format_t format, void *data, unsigned int return 0; } -static const int linear_formats[4][2][2] = { +static const int linear_formats[5][2][2] = { { { SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_S8 }, { SNDRV_PCM_FORMAT_U8, SNDRV_PCM_FORMAT_U8 } }, { { SNDRV_PCM_FORMAT_S16_LE, SNDRV_PCM_FORMAT_S16_BE }, { SNDRV_PCM_FORMAT_U16_LE, SNDRV_PCM_FORMAT_U16_BE } }, + { { SNDRV_PCM_FORMAT_S20_LE, SNDRV_PCM_FORMAT_S20_BE }, + { SNDRV_PCM_FORMAT_U20_LE, SNDRV_PCM_FORMAT_U20_BE } }, { { SNDRV_PCM_FORMAT_S24_LE, SNDRV_PCM_FORMAT_S24_BE }, { SNDRV_PCM_FORMAT_U24_LE, SNDRV_PCM_FORMAT_U24_BE } }, { { SNDRV_PCM_FORMAT_S32_LE, SNDRV_PCM_FORMAT_S32_BE }, @@ -706,12 +738,15 @@ snd_pcm_format_t snd_pcm_build_linear_format(int width, int pwidth, int unsignd, case 16: width = 1; break; - case 24: + case 20: width = 2; break; - case 32: + case 24: width = 3; break; + case 32: + width = 4; + break; default: return SND_PCM_FORMAT_UNKNOWN; }

1 0

[alsa-devel] [alsa-lib][PATCH v3 1/4] asound.h: add SNDRV_PCM_FORMAT_{S, U}20
by Maciej S. Szmigiero 14 Dec '17

14 Dec '17

This patch adds definitions of 20-bit, 4-byte PCM formats SNDRV_PCM_FORMAT_{S,U}20, that were recently added to the kernel, to alsa-lib's own copy of asound.h. Signed-off-by: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> --- include/sound/asound.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/sound/asound.h b/include/sound/asound.h index 5f659126f066..6041cab27a23 100644 --- a/include/sound/asound.h +++ b/include/sound/asound.h @@ -213,6 +213,11 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_IMA_ADPCM ((__force snd_pcm_format_t) 22) #define SNDRV_PCM_FORMAT_MPEG ((__force snd_pcm_format_t) 23) #define SNDRV_PCM_FORMAT_GSM ((__force snd_pcm_format_t) 24) +#define SNDRV_PCM_FORMAT_S20_LE ((__force snd_pcm_format_t) 25) /* in four bytes, LSB justified */ +#define SNDRV_PCM_FORMAT_S20_BE ((__force snd_pcm_format_t) 26) /* in four bytes, LSB justified */ +#define SNDRV_PCM_FORMAT_U20_LE ((__force snd_pcm_format_t) 27) /* in four bytes, LSB justified */ +#define SNDRV_PCM_FORMAT_U20_BE ((__force snd_pcm_format_t) 28) /* in four bytes, LSB justified */ +/* gap in the numbering for a future standard linear format */ #define SNDRV_PCM_FORMAT_SPECIAL ((__force snd_pcm_format_t) 31) #define SNDRV_PCM_FORMAT_S24_3LE ((__force snd_pcm_format_t) 32) /* in three bytes */ #define SNDRV_PCM_FORMAT_S24_3BE ((__force snd_pcm_format_t) 33) /* in three bytes */ @@ -247,6 +252,8 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_FLOAT SNDRV_PCM_FORMAT_FLOAT_LE #define SNDRV_PCM_FORMAT_FLOAT64 SNDRV_PCM_FORMAT_FLOAT64_LE #define SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE +#define SNDRV_PCM_FORMAT_S20 SNDRV_PCM_FORMAT_S20_LE +#define SNDRV_PCM_FORMAT_U20 SNDRV_PCM_FORMAT_U20_LE #endif #ifdef SNDRV_BIG_ENDIAN #define SNDRV_PCM_FORMAT_S16 SNDRV_PCM_FORMAT_S16_BE @@ -258,6 +265,8 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_FLOAT SNDRV_PCM_FORMAT_FLOAT_BE #define SNDRV_PCM_FORMAT_FLOAT64 SNDRV_PCM_FORMAT_FLOAT64_BE #define SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE +#define SNDRV_PCM_FORMAT_S20 SNDRV_PCM_FORMAT_S20_BE +#define SNDRV_PCM_FORMAT_U20 SNDRV_PCM_FORMAT_U20_BE #endif typedef int __bitwise snd_pcm_subformat_t;

1 0

[alsa-devel] [PATCH] ASoC: sun4i-i2s: Show detailed error when DAI configuration callbacks fail
by Chen-Yu Tsai 14 Dec '17

14 Dec '17

When any of the DAI hardware configuration callbacks (.hw_param, .set_fmt, .set_sysclk) fails, there is no explanation about why it failed. This is particularly confusing for .hw_param, which covers many parameters of the DAI. Telling the users what parameter isn't supported, and what the requested value was goes a long way for developers trying to combine sun4i-i2s with external codecs. This patch adds dev_err calls explaining what isn't supported or failed, and what the value was. sun4i_i2s_set_clk_rate()'s first parameter was changed to a struct snd_soc_dai *dai, so we can get the underlying device. Signed-off-by: Chen-Yu Tsai <wens(a)csie.org> --- sound/soc/sunxi/sun4i-i2s.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c index 13d7ecabe1b6..dca1143c1150 100644 --- a/sound/soc/sunxi/sun4i-i2s.c +++ b/sound/soc/sunxi/sun4i-i2s.c @@ -269,10 +269,11 @@ static bool sun4i_i2s_oversample_is_valid(unsigned int oversample) return false; } -static int sun4i_i2s_set_clk_rate(struct sun4i_i2s *i2s, +static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai, unsigned int rate, unsigned int word_size) { + struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai); unsigned int oversample_rate, clk_rate; int bclk_div, mclk_div; int ret; @@ -300,6 +301,7 @@ static int sun4i_i2s_set_clk_rate(struct sun4i_i2s *i2s, break; default: + dev_err(dai->dev, "Unsupported sample rate: %u\n", rate); return -EINVAL; } @@ -308,18 +310,25 @@ static int sun4i_i2s_set_clk_rate(struct sun4i_i2s *i2s, return ret; oversample_rate = i2s->mclk_freq / rate; - if (!sun4i_i2s_oversample_is_valid(oversample_rate)) + if (!sun4i_i2s_oversample_is_valid(oversample_rate)) { + dev_err(dai->dev, "Unsupported oversample rate: %d\n", + oversample_rate); return -EINVAL; + } bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate, word_size); - if (bclk_div < 0) + if (bclk_div < 0) { + dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div); return -EINVAL; + } mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate, clk_rate, rate); - if (mclk_div < 0) + if (mclk_div < 0) { + dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div); return -EINVAL; + } /* Adjust the clock division values if needed */ bclk_div += i2s->variant->bclk_offset; @@ -349,8 +358,11 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream, u32 width; channels = params_channels(params); - if (channels != 2) + if (channels != 2) { + dev_err(dai->dev, "Unsupported number of channels: %d\n", + channels); return -EINVAL; + } if (i2s->variant->has_chcfg) { regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG, @@ -382,6 +394,8 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream, width = DMA_SLAVE_BUSWIDTH_2_BYTES; break; default: + dev_err(dai->dev, "Unsupported physical sample width: %d\n", + params_physical_width(params)); return -EINVAL; } i2s->playback_dma_data.addr_width = width; @@ -393,6 +407,8 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream, break; default: + dev_err(dai->dev, "Unsupported sample width: %d\n", + params_width(params)); return -EINVAL; } @@ -401,7 +417,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream, regmap_field_write(i2s->field_fmt_sr, sr + i2s->variant->fmt_offset); - return sun4i_i2s_set_clk_rate(i2s, params_rate(params), + return sun4i_i2s_set_clk_rate(dai, params_rate(params), params_width(params)); } @@ -426,6 +442,8 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) val = SUN4I_I2S_FMT0_FMT_RIGHT_J; break; default: + dev_err(dai->dev, "Unsupported format: %d\n", + fmt & SND_SOC_DAIFMT_FORMAT_MASK); return -EINVAL; } @@ -464,6 +482,8 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) case SND_SOC_DAIFMT_NB_NF: break; default: + dev_err(dai->dev, "Unsupported clock polarity: %d\n", + fmt & SND_SOC_DAIFMT_INV_MASK); return -EINVAL; } @@ -482,6 +502,8 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) val = SUN4I_I2S_CTRL_MODE_SLAVE; break; default: + dev_err(dai->dev, "Unsupported slave setting: %d\n", + fmt & SND_SOC_DAIFMT_MASTER_MASK); return -EINVAL; } regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG, @@ -504,6 +526,8 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) val = 0; break; default: + dev_err(dai->dev, "Unsupported slave setting: %d\n", + fmt & SND_SOC_DAIFMT_MASTER_MASK); return -EINVAL; } regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG, -- 2.15.0

4 3