August 2016 - Alsa-devel - mailman.alsa-project.org

Re: [alsa-devel] [PATCH] Try to support analog audio codec at firefly reload
by Heiko Stuebner 19 Aug '16

19 Aug '16

Am Dienstag, 16. August 2016, 04:42:06 CEST schrieb Randy Li: > Hello: > This patch could enabled the es8328 codec at firefly reload board, > but it doesn't not really work. I disable the mute of channel > Left mix and Right mix in alsamixer, I could hear the noise from > my headphone, but it never be a music. > I just send this patch here to see whether somebody could figure > out what is wrong, I am really not familiar with sound. I can't really help here as I have neither the board nor that much sound experience, but it's definitly customary to label patches as rfc when they're expected to need more work, so make that [PATCH RFC] ... for stuff that requires more work before it can actually be merged. Heiko

1 0

[alsa-devel] [PATCH] ASoC: rockchip: Add support rt5514 dsp summy dailink
by Xing Zheng 19 Aug '16

19 Aug '16

This patch can attach automaticlly rt5514 spi DAI with driver name "rt5514" in the snd_soc_find_dai process. Turn this feature on, we can enable the voice wake up via rt5514 dsp for RK3399 Gru Boards. Signed-off-by: Xing Zheng <zhengxing(a)rock-chips.com> --- sound/soc/rockchip/Kconfig | 1 + sound/soc/rockchip/rk3399_gru_sound.c | 39 ++++++++++++++++++++++++++++++++- 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/sound/soc/rockchip/Kconfig b/sound/soc/rockchip/Kconfig index 6d39032..d82d763 100644 --- a/sound/soc/rockchip/Kconfig +++ b/sound/soc/rockchip/Kconfig @@ -49,6 +49,7 @@ config SND_SOC_RK3399_GRU_SOUND select SND_SOC_MAX98357A select SND_SOC_RT5514 select SND_SOC_DA7219 + select SND_SOC_RT5514_SPI help Say Y or M here if you want to add support multiple codecs for SoC audio on Rockchip RK3399 GRU boards. diff --git a/sound/soc/rockchip/rk3399_gru_sound.c b/sound/soc/rockchip/rk3399_gru_sound.c index 9933703..164b6da 100644 --- a/sound/soc/rockchip/rk3399_gru_sound.c +++ b/sound/soc/rockchip/rk3399_gru_sound.c @@ -230,8 +230,11 @@ enum { DAILINK_MAX98357A, DAILINK_RT5514, DAILINK_DA7219, + DAILINK_RT5514_DSP, }; +#define DAILINK_ENTITIES (DAILINK_DA7219 + 1) + static struct snd_soc_dai_link rockchip_dailinks[] = { [DAILINK_MAX98357A] = { .name = "MAX98357A", @@ -261,6 +264,13 @@ static struct snd_soc_dai_link rockchip_dailinks[] = { .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, }, + /* RT5514 DSP for voice wakeup via spi bus */ + [DAILINK_RT5514_DSP] = { + .name = "RT5514 DSP", + .stream_name = "Wake on Voice", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + }, }; static struct snd_soc_card rockchip_sound_card = { @@ -276,10 +286,17 @@ static struct snd_soc_card rockchip_sound_card = { .num_controls = ARRAY_SIZE(rockchip_controls), }; +static int rockchip_sound_match_stub(struct device *dev, void *data) +{ + return 1; +} + static int rockchip_sound_probe(struct platform_device *pdev) { struct snd_soc_card *card = &rockchip_sound_card; struct device_node *cpu_node; + struct device *dev; + struct device_driver *drv; int i, ret; cpu_node = of_parse_phandle(pdev->dev.of_node, "rockchip,cpu", 0); @@ -288,7 +305,7 @@ static int rockchip_sound_probe(struct platform_device *pdev) return -EINVAL; } - for (i = 0; i < card->num_links; i++) { + for (i = 0; i < DAILINK_ENTITIES; i++) { rockchip_dailinks[i].platform_of_node = cpu_node; rockchip_dailinks[i].cpu_of_node = cpu_node; @@ -301,6 +318,26 @@ static int rockchip_sound_probe(struct platform_device *pdev) } } + /** + * To acquire the spi driver of the rt5514 and set the dai-links names + * for soc_bind_dai_link + */ + drv = driver_find("rt5514", &spi_bus_type); + if (!drv) { + dev_err(&pdev->dev, "Can not find the rt5514 driver at the spi bus\n"); + return -EINVAL; + } + + dev = driver_find_device(drv, NULL, NULL, rockchip_sound_match_stub); + if (!dev) { + dev_err(&pdev->dev, "Can not find the rt5514 device\n"); + return -ENODEV; + } + + rockchip_dailinks[DAILINK_RT5514_DSP].cpu_name = kstrdup_const(dev_name(dev), GFP_KERNEL); + rockchip_dailinks[DAILINK_RT5514_DSP].cpu_dai_name = kstrdup_const(dev_name(dev), GFP_KERNEL); + rockchip_dailinks[DAILINK_RT5514_DSP].platform_name = kstrdup_const(dev_name(dev), GFP_KERNEL); + card->dev = &pdev->dev; platform_set_drvdata(pdev, card); -- 1.7.9.5

1 0

[alsa-devel] Use of copy_to_user in fireworks_hwdep.c while holding a spin_lock
by Vaishali Thakkar 19 Aug '16

19 Aug '16

Hello, I was wondering about the call to copy_to_user in function hwdep_read_locked and hwdep_read_resp_buf for driver sound/firewire/fireworks/fireworks_hwdep.c. The function hwdep_read calls both of these functions while holding a spinlock[1], which is not normally allowed due to the possibility of a deadlock. This seems to be coming from the commit 555e8a8f7f149544eb7d4aa3a6420bc4c3055638 while adding a command/response functionality into hwdep interface. Is there some reason that I am overlooking, why it is OK in this case? Is there some code in the same file which ensures that page fault will not occur when we are calling these functions while holding a spin_lock_irq? The same issue is there with the driver sound/firewire/tascam/tascam-hwdep.c for obvious reasons. Coccinelle script is used to detect this issue. Thank you. [1] http://lxr.free-electrons.com/source/sound/firewire/fireworks/fireworks_hwd… -- Vaishali

2 1

[alsa-devel] [PATCH 0/3] line6 locking and segfault fixes
by Andrej Krutak 19 Aug '16

19 Aug '16

These are already seen patches fixing a few locking issues, now split out of the POD-X3 patchset. In addition, pod sysfs attributes touched something else than they thought, causing segfaults - fixed it (tested with the same code in podhd)... Andrej Krutak (3): ALSA: line6: Remove double line6_pcm_release() after failed acquire. ALSA: line6: Give up on the lock while URBs are released. ALSA: line6: Fix POD sysfs attributes segfault sound/usb/line6/pcm.c | 3 ++- sound/usb/line6/pod.c | 12 ++++++------ 2 files changed, 8 insertions(+), 7 deletions(-) -- 1.9.1

3 6

[alsa-devel] [PATCH] ASoC: nau8810: Add driver for Nuvoton codec chip NAU88C10
by John Hsu 19 Aug '16

19 Aug '16

The driver is for codec NAU88C10 of Nuvoton Technology Corporation. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> --- .../devicetree/bindings/sound/nau8810.txt | 16 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/nau8810.c | 908 +++++++++++++++++++++ sound/soc/codecs/nau8810.h | 288 +++++++ 5 files changed, 1219 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nau8810.txt create mode 100644 sound/soc/codecs/nau8810.c create mode 100644 sound/soc/codecs/nau8810.h diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt new file mode 100644 index 0000000..05830e4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8810.txt @@ -0,0 +1,16 @@ +NAU8810 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8810" + + - reg : the I2C address of the device. + +Example: + +codec: nau8810@1a { + compatible = "nuvoton,nau8810"; + reg = <0x1a>; +}; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index cb57f8f..bbd7324 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -91,6 +91,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MAX9877 if I2C select SND_SOC_MC13783 if MFD_MC13XXX select SND_SOC_ML26124 if I2C + select SND_SOC_NAU8810 if I2C select SND_SOC_NAU8825 if I2C select SND_SOC_HDMI_CODEC select SND_SOC_PCM1681 if I2C @@ -1046,6 +1047,10 @@ config SND_SOC_MC13783 config SND_SOC_ML26124 tristate +config SND_SOC_NAU8810 + tristate "Nuvoton Technology Corporation NAU88C10 CODEC" + depends on I2C + config SND_SOC_NAU8825 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 550a174..3c15bc5 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -84,6 +84,7 @@ snd-soc-max9850-objs := max9850.o snd-soc-max9860-objs := max9860.o snd-soc-mc13783-objs := mc13783.o snd-soc-ml26124-objs := ml26124.o +snd-soc-nau8810-objs := nau8810.o snd-soc-nau8825-objs := nau8825.o snd-soc-hdmi-codec-objs := hdmi-codec.o snd-soc-pcm1681-objs := pcm1681.o @@ -301,6 +302,7 @@ obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MAX9860) += snd-soc-max9860.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o +obj-$(CONFIG_SND_SOC_NAU8810) += snd-soc-nau8810.o obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o diff --git a/sound/soc/codecs/nau8810.c b/sound/soc/codecs/nau8810.c new file mode 100644 index 0000000..aa25286 --- /dev/null +++ b/sound/soc/codecs/nau8810.c @@ -0,0 +1,908 @@ +/* + * nau8810.c -- NAU8810 ALSA Soc Audio driver + * + * Copyright 2016 Nuvoton Technology Corp. + * + * Author: David Lin <ctlin0(a)nuvoton.com> + * + * Based on WM8974.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "nau8810.h" + +#define NAU_PLL_FREQ_MAX 100000000 +#define NAU_PLL_FREQ_MIN 90000000 +#define NAU_PLL_REF_MAX 33000000 +#define NAU_PLL_REF_MIN 8000000 +#define NAU_PLL_OPTOP_MIN 6 + + +static const int nau8810_mclk_scaler[] = { 10, 15, 20, 30, 40, 60, 80, 120 }; + +static const struct reg_default nau8810_reg_defaults[] = { + { NAU8810_REG_POWER1, 0x0000 }, + { NAU8810_REG_POWER2, 0x0000 }, + { NAU8810_REG_POWER3, 0x0000 }, + { NAU8810_REG_IFACE, 0x0050 }, + { NAU8810_REG_COMP, 0x0000 }, + { NAU8810_REG_CLOCK, 0x0140 }, + { NAU8810_REG_SMPLR, 0x0000 }, + { NAU8810_REG_DAC, 0x0000 }, + { NAU8810_REG_DACGAIN, 0x00FF }, + { NAU8810_REG_ADC, 0x0100 }, + { NAU8810_REG_ADCGAIN, 0x00FF }, + { NAU8810_REG_EQ1, 0x012C }, + { NAU8810_REG_EQ2, 0x002C }, + { NAU8810_REG_EQ3, 0x002C }, + { NAU8810_REG_EQ4, 0x002C }, + { NAU8810_REG_EQ5, 0x002C }, + { NAU8810_REG_DACLIM1, 0x0032 }, + { NAU8810_REG_DACLIM2, 0x0000 }, + { NAU8810_REG_NOTCH1, 0x0000 }, + { NAU8810_REG_NOTCH2, 0x0000 }, + { NAU8810_REG_NOTCH3, 0x0000 }, + { NAU8810_REG_NOTCH4, 0x0000 }, + { NAU8810_REG_ALC1, 0x0038 }, + { NAU8810_REG_ALC2, 0x000B }, + { NAU8810_REG_ALC3, 0x0032 }, + { NAU8810_REG_NOISEGATE, 0x0000 }, + { NAU8810_REG_PLLN, 0x0008 }, + { NAU8810_REG_PLLK1, 0x000C }, + { NAU8810_REG_PLLK2, 0x0093 }, + { NAU8810_REG_PLLK3, 0x00E9 }, + { NAU8810_REG_ATTEN, 0x0000 }, + { NAU8810_REG_INPUT_SIGNAL, 0x0003 }, + { NAU8810_REG_PGAGAIN, 0x0010 }, + { NAU8810_REG_ADCBOOST, 0x0100 }, + { NAU8810_REG_OUTPUT, 0x0002 }, + { NAU8810_REG_SPKMIX, 0x0001 }, + { NAU8810_REG_SPKGAIN, 0x0039 }, + { NAU8810_REG_MONOMIX, 0x0001 }, + { NAU8810_REG_POWER4, 0x0000 }, + { NAU8810_REG_TSLOTCTL1, 0x0000 }, + { NAU8810_REG_TSLOTCTL2, 0x0020 }, + { NAU8810_REG_DEVICE_REVID, 0x0000 }, + { NAU8810_REG_I2C_DEVICEID, 0x001A }, + { NAU8810_REG_ADDITIONID, 0x00CA }, + { NAU8810_REG_RESERVE, 0x0124 }, + { NAU8810_REG_OUTCTL, 0x0001 }, + { NAU8810_REG_ALC1ENHAN1, 0x0010 }, + { NAU8810_REG_ALC1ENHAN2, 0x0000 }, + { NAU8810_REG_MISCCTL, 0x0000 }, + { NAU8810_REG_OUTTIEOFF, 0x0000 }, + { NAU8810_REG_AGCP2POUT, 0x0000 }, + { NAU8810_REG_AGCPOUT, 0x0000 }, + { NAU8810_REG_AMTCTL, 0x0000 }, + { NAU8810_REG_OUTTIEOFFMAN, 0x0000 }, +}; + +static bool nau8810_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8810_REG_RESET ... NAU8810_REG_SMPLR: + case NAU8810_REG_DAC ... NAU8810_REG_DACGAIN: + case NAU8810_REG_ADC ... NAU8810_REG_ADCGAIN: + case NAU8810_REG_EQ1 ... NAU8810_REG_EQ5: + case NAU8810_REG_DACLIM1 ... NAU8810_REG_DACLIM2: + case NAU8810_REG_NOTCH1 ... NAU8810_REG_NOTCH4: + case NAU8810_REG_ALC1 ... NAU8810_REG_ATTEN: + case NAU8810_REG_INPUT_SIGNAL ... NAU8810_REG_PGAGAIN: + case NAU8810_REG_ADCBOOST: + case NAU8810_REG_OUTPUT ... NAU8810_REG_SPKMIX: + case NAU8810_REG_SPKGAIN: + case NAU8810_REG_MONOMIX: + case NAU8810_REG_POWER4 ... NAU8810_REG_TSLOTCTL2: + case NAU8810_REG_DEVICE_REVID ... NAU8810_REG_RESERVE: + case NAU8810_REG_OUTCTL ... NAU8810_REG_ALC1ENHAN2: + case NAU8810_REG_MISCCTL: + case NAU8810_REG_OUTTIEOFF ... NAU8810_REG_OUTTIEOFFMAN: + return true; + default: + return false; + } +} + +static bool nau8810_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8810_REG_RESET ... NAU8810_REG_SMPLR: + case NAU8810_REG_DAC ... NAU8810_REG_DACGAIN: + case NAU8810_REG_ADC ... NAU8810_REG_ADCGAIN: + case NAU8810_REG_EQ1 ... NAU8810_REG_EQ5: + case NAU8810_REG_DACLIM1 ... NAU8810_REG_DACLIM2: + case NAU8810_REG_NOTCH1 ... NAU8810_REG_NOTCH4: + case NAU8810_REG_ALC1 ... NAU8810_REG_ATTEN: + case NAU8810_REG_INPUT_SIGNAL ... NAU8810_REG_PGAGAIN: + case NAU8810_REG_ADCBOOST: + case NAU8810_REG_OUTPUT ... NAU8810_REG_SPKMIX: + case NAU8810_REG_SPKGAIN: + case NAU8810_REG_MONOMIX: + case NAU8810_REG_POWER4 ... NAU8810_REG_TSLOTCTL2: + case NAU8810_REG_OUTCTL ... NAU8810_REG_ALC1ENHAN2: + case NAU8810_REG_MISCCTL: + case NAU8810_REG_OUTTIEOFF ... NAU8810_REG_OUTTIEOFFMAN: + return true; + default: + return false; + } +} + +static bool nau8810_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8810_REG_RESET: + case NAU8810_REG_DEVICE_REVID ... NAU8810_REG_RESERVE: + return true; + default: + return false; + } +} + +static int nau8810_eq_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + int i, reg, reg_val; + u16 *val; + + val = (u16 *)ucontrol->value.bytes.data; + reg = NAU8810_REG_EQ1; + for (i = 0; i < params->max / sizeof(u16); i++) { + regmap_read(nau8810->regmap, reg + i, &reg_val); + reg_val = cpu_to_be16(reg_val); + memcpy(val + i, &reg_val, sizeof(reg_val)); + } + + return 0; +} + +static int nau8810_eq_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + void *data; + u16 *val, value; + int i, reg, ret; + + data = kmemdup(ucontrol->value.bytes.data, + params->max, GFP_KERNEL | GFP_DMA); + if (!data) + return -ENOMEM; + + val = (u16 *)data; + reg = NAU8810_REG_EQ1; + for (i = 0; i < params->max / sizeof(u16); i++) { + value = be16_to_cpu(*(val + i)); + ret = regmap_write(nau8810->regmap, reg + i, value); + if (ret) { + dev_err(codec->dev, "EQ configuration fail, register: %x ret: %d\n", + reg + i, ret); + return ret; + } + } + kfree(data); + + return 0; +} + +static const char * const nau8810_companding[] = { + "Off", "NC", "u-law", "A-law" }; + +static const struct soc_enum nau8810_companding_adc_enum = + SOC_ENUM_SINGLE(NAU8810_REG_COMP, NAU8810_ADCCM_SFT, + ARRAY_SIZE(nau8810_companding), nau8810_companding); + +static const struct soc_enum nau8810_companding_dac_enum = + SOC_ENUM_SINGLE(NAU8810_REG_COMP, NAU8810_DACCM_SFT, + ARRAY_SIZE(nau8810_companding), nau8810_companding); + +static const char * const nau8810_deemp[] = { + "None", "32kHz", "44.1kHz", "48kHz" }; + +static const struct soc_enum nau8810_deemp_enum = + SOC_ENUM_SINGLE(NAU8810_REG_DAC, NAU8810_DEEMP_SFT, + ARRAY_SIZE(nau8810_deemp), nau8810_deemp); + +static const char * const nau8810_eqmode[] = {"Capture", "Playback" }; + +static const struct soc_enum nau8810_eqmode_enum = + SOC_ENUM_SINGLE(NAU8810_REG_EQ1, NAU8810_EQM_SFT, + ARRAY_SIZE(nau8810_eqmode), nau8810_eqmode); + +static const char * const nau8810_alc[] = {"Normal", "Limiter" }; + +static const struct soc_enum nau8810_alc_enum = + SOC_ENUM_SINGLE(NAU8810_REG_ALC3, NAU8810_ALCM_SFT, + ARRAY_SIZE(nau8810_alc), nau8810_alc); + +static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); +static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0); +static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0); + +static const struct snd_kcontrol_new nau8810_snd_controls[] = { + SOC_ENUM("ADC Companding", nau8810_companding_adc_enum), + SOC_ENUM("DAC Companding", nau8810_companding_dac_enum), + SOC_ENUM("DAC De-emphasis", nau8810_deemp_enum), + + SOC_ENUM("EQ Function", nau8810_eqmode_enum), + SND_SOC_BYTES_EXT("EQ Parameters", 10, + nau8810_eq_get, nau8810_eq_put), + + SOC_SINGLE("DAC Inversion Switch", NAU8810_REG_DAC, + NAU8810_DACPL_SFT, 1, 0), + SOC_SINGLE_TLV("Playback Volume", NAU8810_REG_DACGAIN, + NAU8810_DACGAIN_SFT, 0xff, 0, digital_tlv), + + SOC_SINGLE("High Pass Filter Switch", NAU8810_REG_ADC, + NAU8810_HPFEN_SFT, 1, 0), + SOC_SINGLE("High Pass Cut Off", NAU8810_REG_ADC, + NAU8810_HPF_SFT, 0x7, 0), + + SOC_SINGLE("ADC Inversion Switch", NAU8810_REG_ADC, + NAU8810_ADCPL_SFT, 1, 0), + SOC_SINGLE_TLV("Capture Volume", NAU8810_REG_ADCGAIN, + NAU8810_ADCGAIN_SFT, 0xff, 0, digital_tlv), + + SOC_SINGLE_TLV("EQ1 Volume", NAU8810_REG_EQ1, + NAU8810_EQ1GC_SFT, 0x18, 1, eq_tlv), + SOC_SINGLE_TLV("EQ2 Volume", NAU8810_REG_EQ2, + NAU8810_EQ2GC_SFT, 0x18, 1, eq_tlv), + SOC_SINGLE_TLV("EQ3 Volume", NAU8810_REG_EQ3, + NAU8810_EQ3GC_SFT, 0x18, 1, eq_tlv), + SOC_SINGLE_TLV("EQ4 Volume", NAU8810_REG_EQ4, + NAU8810_EQ4GC_SFT, 0x18, 1, eq_tlv), + SOC_SINGLE_TLV("EQ5 Volume", NAU8810_REG_EQ5, + NAU8810_EQ5GC_SFT, 0x18, 1, eq_tlv), + + SOC_SINGLE("DAC Limiter Switch", NAU8810_REG_DACLIM1, + NAU8810_DACLIMEN_SFT, 1, 0), + SOC_SINGLE("DAC Limiter Decay", NAU8810_REG_DACLIM1, + NAU8810_DACLIMDCY_SFT, 0xf, 0), + SOC_SINGLE("DAC Limiter Attack", NAU8810_REG_DACLIM1, + NAU8810_DACLIMATK_SFT, 0xf, 0), + SOC_SINGLE("DAC Limiter Threshold", NAU8810_REG_DACLIM2, + NAU8810_DACLIMTHL_SFT, 0x7, 0), + SOC_SINGLE("DAC Limiter Boost", NAU8810_REG_DACLIM2, + NAU8810_DACLIMBST_SFT, 0xf, 0), + + SOC_ENUM("ALC Mode", nau8810_alc_enum), + SOC_SINGLE("ALC Enable Switch", NAU8810_REG_ALC1, + NAU8810_ALCEN_SFT, 1, 0), + SOC_SINGLE("ALC Max Volume", NAU8810_REG_ALC1, + NAU8810_ALCMXGAIN_SFT, 0x7, 0), + SOC_SINGLE("ALC Min Volume", NAU8810_REG_ALC1, + NAU8810_ALCMINGAIN_SFT, 0x7, 0), + SOC_SINGLE("ALC ZC Switch", NAU8810_REG_ALC2, + NAU8810_ALCZC_SFT, 1, 0), + SOC_SINGLE("ALC Hold", NAU8810_REG_ALC2, + NAU8810_ALCHT_SFT, 0xf, 0), + SOC_SINGLE("ALC Target", NAU8810_REG_ALC2, + NAU8810_ALCSL_SFT, 0xf, 0), + SOC_SINGLE("ALC Decay", NAU8810_REG_ALC3, + NAU8810_ALCDCY_SFT, 0xf, 0), + SOC_SINGLE("ALC Attack", NAU8810_REG_ALC3, + NAU8810_ALCATK_SFT, 0xf, 0), + SOC_SINGLE("ALC Noise Gate Switch", NAU8810_REG_NOISEGATE, + NAU8810_ALCNEN_SFT, 1, 0), + SOC_SINGLE("ALC Noise Gate Threshold", NAU8810_REG_NOISEGATE, + NAU8810_ALCNTH_SFT, 0x7, 0), + + SOC_SINGLE("PGA ZC Switch", NAU8810_REG_PGAGAIN, + NAU8810_PGAZC_SFT, 1, 0), + SOC_SINGLE_TLV("PGA Volume", NAU8810_REG_PGAGAIN, + NAU8810_PGAGAIN_SFT, 0x3f, 0, inpga_tlv), + + SOC_SINGLE("Speaker ZC Switch", NAU8810_REG_SPKGAIN, + NAU8810_SPKZC_SFT, 1, 0), + SOC_SINGLE("Speaker Mute Switch", NAU8810_REG_SPKGAIN, + NAU8810_SPKMT_SFT, 1, 0), + SOC_SINGLE_TLV("Speaker Volume", NAU8810_REG_SPKGAIN, + NAU8810_SPKGAIN_SFT, 0x3f, 0, spk_tlv), + + SOC_SINGLE("Capture Boost(+20dB)", NAU8810_REG_ADCBOOST, + NAU8810_PGABST_SFT, 1, 0), + SOC_SINGLE("Mono Mute Switch", NAU8810_REG_MONOMIX, + NAU8810_MOUTMXMT_SFT, 1, 0), + + SOC_SINGLE("DAC Oversampling Rate(128x) Switch", NAU8810_REG_DAC, + NAU8810_DACOS_SFT, 1, 0), + SOC_SINGLE("ADC Oversampling Rate(128x) Switch", NAU8810_REG_ADC, + NAU8810_ADCOS_SFT, 1, 0), +}; + +/* Speaker Output Mixer */ +static const struct snd_kcontrol_new nau8810_speaker_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Bypass Switch", NAU8810_REG_SPKMIX, + NAU8810_BYPSPK_SFT, 1, 0), + SOC_DAPM_SINGLE("PCM Playback Switch", NAU8810_REG_SPKMIX, + NAU8810_DACSPK_SFT, 1, 0), +}; + +/* Mono Output Mixer */ +static const struct snd_kcontrol_new nau8810_mono_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Bypass Switch", NAU8810_REG_MONOMIX, + NAU8810_BYPMOUT_SFT, 1, 0), + SOC_DAPM_SINGLE("PCM Playback Switch", NAU8810_REG_MONOMIX, + NAU8810_DACMOUT_SFT, 1, 0), +}; + +/* PGA Mute */ +static const struct snd_kcontrol_new nau8810_inpga_mute[] = { + SOC_DAPM_SINGLE("PGA Mute Switch", NAU8810_REG_PGAGAIN, + NAU8810_PGAMT_SFT, 1, 0), +}; + +/* Input PGA */ +static const struct snd_kcontrol_new nau8810_inpga[] = { + SOC_DAPM_SINGLE("MicN Switch", NAU8810_REG_INPUT_SIGNAL, + NAU8810_NMICPGA_SFT, 1, 0), + SOC_DAPM_SINGLE("MicP Switch", NAU8810_REG_INPUT_SIGNAL, + NAU8810_PMICPGA_SFT, 1, 0), +}; + +/* Mic Input boost vol */ +static const struct snd_kcontrol_new nau8810_mic_boost_controls = + SOC_DAPM_SINGLE("Mic Volume", NAU8810_REG_ADCBOOST, + NAU8810_PMICBSTGAIN_SFT, 0x7, 0); + +/* Loopback Switch */ +static const struct snd_kcontrol_new nau8810_loopback[] = { + SOC_DAPM_SINGLE("Switch", NAU8810_REG_COMP, + NAU8810_ADDAP_SFT, 1, 0), +}; + +static int check_mclk_select_pll(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(source->dapm); + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + unsigned int value; + + regmap_read(nau8810->regmap, NAU8810_REG_CLOCK, &value); + return (value & NAU8810_CLKM_MASK); +} + +static const struct snd_soc_dapm_widget nau8810_dapm_widgets[] = { + SND_SOC_DAPM_MIXER("Speaker Mixer", NAU8810_REG_POWER3, + NAU8810_SPKMX_EN_SFT, 0, &nau8810_speaker_mixer_controls[0], + ARRAY_SIZE(nau8810_speaker_mixer_controls)), + SND_SOC_DAPM_MIXER("Mono Mixer", NAU8810_REG_POWER3, + NAU8810_MOUTMX_EN_SFT, 0, &nau8810_mono_mixer_controls[0], + ARRAY_SIZE(nau8810_mono_mixer_controls)), + SND_SOC_DAPM_DAC("DAC", "HiFi Playback", NAU8810_REG_POWER3, + NAU8810_DAC_EN_SFT, 0), + SND_SOC_DAPM_ADC("ADC", "HiFi Capture", NAU8810_REG_POWER2, + NAU8810_ADC_EN_SFT, 0), + SND_SOC_DAPM_PGA("SpkN Out", NAU8810_REG_POWER3, + NAU8810_NSPK_EN_SFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("SpkP Out", NAU8810_REG_POWER3, + NAU8810_PSPK_EN_SFT, 0, NULL, 0), + SND_SOC_DAPM_PGA("Mono Out", NAU8810_REG_POWER3, + NAU8810_MOUT_EN_SFT, 0, NULL, 0), + + SND_SOC_DAPM_MIXER("Input PGA", NAU8810_REG_POWER2, + NAU8810_PGA_EN_SFT, 0, nau8810_inpga, + ARRAY_SIZE(nau8810_inpga)), + SND_SOC_DAPM_MIXER("Input Boost Stage", NAU8810_REG_POWER2, + NAU8810_BST_EN_SFT, 0, nau8810_inpga_mute, + ARRAY_SIZE(nau8810_inpga_mute)), + + SND_SOC_DAPM_SUPPLY("Mic Bias", NAU8810_REG_POWER1, + NAU8810_MICBIAS_EN_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL", NAU8810_REG_POWER1, + NAU8810_PLL_EN_SFT, 0, NULL, 0), + + SND_SOC_DAPM_SWITCH("Digital Loopback", SND_SOC_NOPM, 0, 0, + &nau8810_loopback), + + SND_SOC_DAPM_INPUT("MICN"), + SND_SOC_DAPM_INPUT("MICP"), + SND_SOC_DAPM_OUTPUT("MONOOUT"), + SND_SOC_DAPM_OUTPUT("SPKOUTP"), + SND_SOC_DAPM_OUTPUT("SPKOUTN"), +}; + +static const struct snd_soc_dapm_route nau8810_dapm_routes[] = { + {"DAC", NULL, "PLL", check_mclk_select_pll}, + + /* Mono output mixer */ + {"Mono Mixer", "PCM Playback Switch", "DAC"}, + {"Mono Mixer", "Line Bypass Switch", "Input Boost Stage"}, + + /* Speaker output mixer */ + {"Speaker Mixer", "PCM Playback Switch", "DAC"}, + {"Speaker Mixer", "Line Bypass Switch", "Input Boost Stage"}, + + /* Outputs */ + {"Mono Out", NULL, "Mono Mixer"}, + {"MONOOUT", NULL, "Mono Out"}, + {"SpkN Out", NULL, "Speaker Mixer"}, + {"SpkP Out", NULL, "Speaker Mixer"}, + {"SPKOUTN", NULL, "SpkN Out"}, + {"SPKOUTP", NULL, "SpkP Out"}, + + /* Input Boost Stage */ + {"ADC", NULL, "Input Boost Stage"}, + {"ADC", NULL, "PLL", check_mclk_select_pll}, + {"Input Boost Stage", NULL, "Input PGA"}, + {"Input Boost Stage", NULL, "MICP"}, + + /* Input PGA */ + {"Input PGA", NULL, "Mic Bias"}, + {"Input PGA", "MicN Switch", "MICN"}, + {"Input PGA", "MicP Switch", "MICP"}, + + /* Digital Looptack */ + {"Digital Loopback", "Switch", "ADC"}, + {"DAC", NULL, "Digital Loopback"}, +}; + +static int nau8810_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + + nau8810->sysclk = freq; + dev_dbg(nau8810->dev, "master sysclk %dHz\n", nau8810->sysclk); + + return 0; +} + +static int nau8810_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) +{ + struct snd_soc_codec *codec = dai->codec; + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + struct regmap *regmap = nau8810->regmap; + struct nau8810_pll *pll = &nau8810->pll; + + switch (nau8810->div_id) { + case NAU8810_MCLK_DIV_PLL: + /* master clock from PLL and enable PLL */ + if (pll->mclk_scaler != div) { + dev_err(nau8810->dev, "Master clock prescaler not meet PLL parameters\n"); + return -EINVAL; + } + regmap_update_bits(regmap, NAU8810_REG_CLOCK, + NAU8810_MCLKSEL_MASK, (div << NAU8810_MCLKSEL_SFT)); + regmap_update_bits(regmap, NAU8810_REG_CLOCK, + NAU8810_CLKM_MASK, NAU8810_CLKM_PLL); + break; + + case NAU8810_MCLK_DIV_MCLK: + /* Defer the master clock prescaler configuration to DAI + * hardware parameter if master clock from MCLK because + * it needs runtime fs information to get the proper div. + */ + break; + + case NAU8810_BCLK_DIV: + regmap_update_bits(regmap, NAU8810_REG_CLOCK, + NAU8810_BCLKSEL_MASK, (div << NAU8810_BCLKSEL_SFT)); + break; + + default: + return -EINVAL; + } + nau8810->div_id = div_id; + + return 0; +} + +static int nau8810_mclk_clkdiv(struct nau8810 *nau8810, int rate) +{ + struct regmap *regmap = nau8810->regmap; + int i, sclk, imclk = rate * 256, div = 0; + + if (!nau8810->sysclk) { + dev_err(nau8810->dev, "Make mclk div configuration fail because of invalid system clock\n"); + return -EINVAL; + } + + /* Configure the master clock prescaler div to make system + * clock to approximate the internal master clock (IMCLK); + * and large or equal to IMCLK. + */ + for (i = 1; i < ARRAY_SIZE(nau8810_mclk_scaler); i++) { + sclk = (nau8810->sysclk * 10) / + nau8810_mclk_scaler[i]; + if (sclk < imclk) + break; + div = i; + } + dev_dbg(nau8810->dev, + "master clock prescaler %x for fs %d\n", div, rate); + + /* master clock from MCLK and disable PLL */ + regmap_update_bits(regmap, NAU8810_REG_CLOCK, + NAU8810_MCLKSEL_MASK, (div << NAU8810_MCLKSEL_SFT)); + regmap_update_bits(regmap, NAU8810_REG_CLOCK, + NAU8810_CLKM_MASK, NAU8810_CLKM_MCLK); + + return 0; +} + +static int nau88l0_calc_pll(unsigned int pll_in, + unsigned int fs, struct nau8810_pll *pll_param) +{ + u64 f2, f2_max, pll_ratio; + int i, scal_sel; + + if (pll_in > NAU_PLL_REF_MAX || pll_in < NAU_PLL_REF_MIN) + return -EINVAL; + + f2_max = 0; + scal_sel = ARRAY_SIZE(nau8810_mclk_scaler); + for (i = 0; i < ARRAY_SIZE(nau8810_mclk_scaler); i++) { + f2 = 256 * fs * 4 * nau8810_mclk_scaler[i] / 10; + if (f2 > NAU_PLL_FREQ_MIN && f2 < NAU_PLL_FREQ_MAX && + f2_max < f2) { + f2_max = f2; + scal_sel = i; + } + } + if (ARRAY_SIZE(nau8810_mclk_scaler) == scal_sel) + return -EINVAL; + pll_param->mclk_scaler = scal_sel; + f2 = f2_max; + + /* Calculate the PLL 4-bit integer input and the PLL 24-bit fractional + * input; round up the 24+4bit. + */ + pll_ratio = div_u64(f2 << 28, pll_in); + pll_param->pre_factor = 0; + if (((pll_ratio >> 28) & 0xF) < NAU_PLL_OPTOP_MIN) { + pll_ratio <<= 1; + pll_param->pre_factor = 1; + } + pll_param->pll_int = (pll_ratio >> 28) & 0xF; + pll_param->pll_frac = ((pll_ratio & 0xFFFFFFF) >> 4); + + return 0; +} + +static int nau8810_set_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + struct regmap *map = nau8810->regmap; + struct nau8810_pll *pll_param = &nau8810->pll; + int ret, fs; + + fs = freq_out / 256; + ret = nau88l0_calc_pll(freq_in, fs, pll_param); + if (ret < 0) { + dev_err(nau8810->dev, "Unsupported input clock %d\n", freq_in); + return ret; + } + dev_info(nau8810->dev, "pll_int=%x pll_frac=%x mclk_scaler=%x pre_factor=%x\n", + pll_param->pll_int, pll_param->pll_frac, pll_param->mclk_scaler, + pll_param->pre_factor); + + regmap_update_bits(map, NAU8810_REG_PLLN, + NAU8810_PLLMCLK_DIV2 | NAU8810_PLLN_MASK, + (pll_param->pre_factor ? NAU8810_PLLMCLK_DIV2 : 0) | + pll_param->pll_int); + regmap_write(map, NAU8810_REG_PLLK1, + (pll_param->pll_frac >> NAU8810_PLLK1_SFT) & + NAU8810_PLLK1_MASK); + regmap_write(map, NAU8810_REG_PLLK2, + (pll_param->pll_frac >> NAU8810_PLLK2_SFT) & + NAU8810_PLLK2_MASK); + regmap_write(map, NAU8810_REG_PLLK3, + pll_param->pll_frac & NAU8810_PLLK3_MASK); + regmap_update_bits(map, NAU8810_REG_CLOCK, NAU8810_MCLKSEL_MASK, + pll_param->mclk_scaler << NAU8810_MCLKSEL_SFT); + regmap_update_bits(map, NAU8810_REG_CLOCK, + NAU8810_CLKM_MASK, NAU8810_CLKM_PLL); + + return 0; +} + +static int nau8810_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + u16 ctrl1_val = 0, ctrl2_val = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + ctrl2_val |= NAU8810_CLKIO_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ctrl1_val |= NAU8810_AIFMT_I2S; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + ctrl1_val |= NAU8810_AIFMT_LEFT; + break; + case SND_SOC_DAIFMT_DSP_A: + ctrl1_val |= NAU8810_AIFMT_PCM_A; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + ctrl1_val |= NAU8810_BCLKP_IB | NAU8810_FSP_IF; + break; + case SND_SOC_DAIFMT_IB_NF: + ctrl1_val |= NAU8810_BCLKP_IB; + break; + case SND_SOC_DAIFMT_NB_IF: + ctrl1_val |= NAU8810_FSP_IF; + break; + default: + return -EINVAL; + } + + regmap_update_bits(nau8810->regmap, NAU8810_REG_IFACE, + NAU8810_AIFMT_MASK | NAU8810_FSP_IF | + NAU8810_BCLKP_IB, ctrl1_val); + regmap_update_bits(nau8810->regmap, NAU8810_REG_CLOCK, + NAU8810_CLKIO_MASK, ctrl2_val); + + return 0; +} + +static int nau8810_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + int val_len = 0, val_rate = 0, ret = 0; + + switch (params_width(params)) { + case 16: + break; + case 20: + val_len |= NAU8810_WLEN_20; + break; + case 24: + val_len |= NAU8810_WLEN_24; + break; + case 32: + val_len |= NAU8810_WLEN_32; + break; + } + + switch (params_rate(params)) { + case 8000: + val_rate |= NAU8810_SMPLR_8K; + break; + case 11025: + val_rate |= NAU8810_SMPLR_12K; + break; + case 16000: + val_rate |= NAU8810_SMPLR_16K; + break; + case 22050: + val_rate |= NAU8810_SMPLR_24K; + break; + case 32000: + val_rate |= NAU8810_SMPLR_32K; + break; + case 44100: + case 48000: + break; + } + + regmap_update_bits(nau8810->regmap, NAU8810_REG_IFACE, + NAU8810_WLEN_MASK, val_len); + regmap_update_bits(nau8810->regmap, NAU8810_REG_SMPLR, + NAU8810_SMPLR_MASK, val_rate); + + /* If the master clock is from MCLK, provide the runtime FS for driver + * to get the master clock prescaler configuration. + */ + if (nau8810->div_id == NAU8810_MCLK_DIV_MCLK) { + ret = nau8810_mclk_clkdiv(nau8810, params_rate(params)); + if (ret < 0) + dev_err(nau8810->dev, "MCLK div configuration fail\n"); + } + + return ret; +} + +static int nau8810_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct nau8810 *nau8810 = snd_soc_codec_get_drvdata(codec); + struct regmap *map = nau8810->regmap; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + regmap_update_bits(map, NAU8810_REG_POWER1, + NAU8810_REFIMP_MASK, NAU8810_REFIMP_80K); + break; + + case SND_SOC_BIAS_STANDBY: + regmap_update_bits(map, NAU8810_REG_POWER1, + NAU8810_IOBUF_EN | NAU8810_ABIAS_EN, + NAU8810_IOBUF_EN | NAU8810_ABIAS_EN); + + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { + regcache_sync(map); + regmap_update_bits(map, NAU8810_REG_POWER1, + NAU8810_REFIMP_MASK, NAU8810_REFIMP_3K); + mdelay(100); + } + regmap_update_bits(map, NAU8810_REG_POWER1, + NAU8810_REFIMP_MASK, NAU8810_REFIMP_300K); + break; + + case SND_SOC_BIAS_OFF: + regmap_write(map, NAU8810_REG_POWER1, 0); + regmap_write(map, NAU8810_REG_POWER2, 0); + regmap_write(map, NAU8810_REG_POWER3, 0); + break; + } + + return 0; +} + + +#define NAU8810_RATES (SNDRV_PCM_RATE_8000_48000) + +#define NAU8810_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops nau8810_ops = { + .hw_params = nau8810_pcm_hw_params, + .set_fmt = nau8810_set_dai_fmt, + .set_sysclk = nau8810_set_sysclk, + .set_clkdiv = nau8810_set_clkdiv, + .set_pll = nau8810_set_pll, +}; + +static struct snd_soc_dai_driver nau8810_dai = { + .name = "nau8810-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, /* Only 1 channel of data */ + .rates = NAU8810_RATES, + .formats = NAU8810_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, /* Only 1 channel of data */ + .rates = NAU8810_RATES, + .formats = NAU8810_FORMATS, + }, + .ops = &nau8810_ops, + .symmetric_rates = 1, +}; + +static const struct regmap_config nau8810_regmap_config = { + .reg_bits = 7, + .val_bits = 9, + + .max_register = NAU8810_REG_MAX, + .readable_reg = nau8810_readable_reg, + .writeable_reg = nau8810_writeable_reg, + .volatile_reg = nau8810_volatile_reg, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = nau8810_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(nau8810_reg_defaults), +}; + +static int nau8810_probe(struct snd_soc_codec *codec) +{ + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_nau8810 = { + .probe = nau8810_probe, + .set_bias_level = nau8810_set_bias_level, + .suspend_bias_off = true, + + .controls = nau8810_snd_controls, + .num_controls = ARRAY_SIZE(nau8810_snd_controls), + .dapm_widgets = nau8810_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(nau8810_dapm_widgets), + .dapm_routes = nau8810_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(nau8810_dapm_routes), +}; + +static int nau8810_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct nau8810 *nau8810 = dev_get_platdata(dev); + + if (!nau8810) { + nau8810 = devm_kzalloc(dev, sizeof(*nau8810), GFP_KERNEL); + if (!nau8810) + return -ENOMEM; + } + i2c_set_clientdata(i2c, nau8810); + + nau8810->regmap = devm_regmap_init_i2c(i2c, &nau8810_regmap_config); + if (IS_ERR(nau8810->regmap)) + return PTR_ERR(nau8810->regmap); + nau8810->dev = dev; + + regmap_write(nau8810->regmap, NAU8810_REG_RESET, 0x00); + + return snd_soc_register_codec(dev, + &soc_codec_dev_nau8810, &nau8810_dai, 1); +} + +static int nau8810_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + + return 0; +} + +static const struct i2c_device_id nau8810_i2c_id[] = { + { "nau8810", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id nau8810_of_match[] = { + { .compatible = "nuvoton,nau8810", }, + { } +}; +MODULE_DEVICE_TABLE(of, nau8810_of_match); +#endif + +static struct i2c_driver nau8810_i2c_driver = { + .driver = { + .name = "nau8810", + .of_match_table = of_match_ptr(nau8810_of_match), + }, + .probe = nau8810_i2c_probe, + .remove = nau8810_i2c_remove, + .id_table = nau8810_i2c_id, +}; + +module_i2c_driver(nau8810_i2c_driver); + +MODULE_DESCRIPTION("ASoC NAU8810 driver"); +MODULE_AUTHOR("David Lin <ctlin0(a)nuvoton.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/nau8810.h b/sound/soc/codecs/nau8810.h new file mode 100644 index 0000000..14b8ae3 --- /dev/null +++ b/sound/soc/codecs/nau8810.h @@ -0,0 +1,288 @@ +/* + * NAU8810 ALSA SoC audio driver + * + * Copyright 2016 Nuvoton Technology Corp. + * Author: David Lin <ctlin0(a)nuvoton.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __NAU8810_H__ +#define __NAU8810_H__ + +#define NAU8810_REG_RESET 0x00 +#define NAU8810_REG_POWER1 0x01 +#define NAU8810_REG_POWER2 0x02 +#define NAU8810_REG_POWER3 0x03 +#define NAU8810_REG_IFACE 0x04 +#define NAU8810_REG_COMP 0x05 +#define NAU8810_REG_CLOCK 0x06 +#define NAU8810_REG_SMPLR 0x07 +#define NAU8810_REG_DAC 0x0A +#define NAU8810_REG_DACGAIN 0x0B +#define NAU8810_REG_ADC 0x0E +#define NAU8810_REG_ADCGAIN 0x0F +#define NAU8810_REG_EQ1 0x12 +#define NAU8810_REG_EQ2 0x13 +#define NAU8810_REG_EQ3 0x14 +#define NAU8810_REG_EQ4 0x15 +#define NAU8810_REG_EQ5 0x16 +#define NAU8810_REG_DACLIM1 0x18 +#define NAU8810_REG_DACLIM2 0x19 +#define NAU8810_REG_NOTCH1 0x1B +#define NAU8810_REG_NOTCH2 0x1C +#define NAU8810_REG_NOTCH3 0x1D +#define NAU8810_REG_NOTCH4 0x1E +#define NAU8810_REG_ALC1 0x20 +#define NAU8810_REG_ALC2 0x21 +#define NAU8810_REG_ALC3 0x22 +#define NAU8810_REG_NOISEGATE 0x23 +#define NAU8810_REG_PLLN 0x24 +#define NAU8810_REG_PLLK1 0x25 +#define NAU8810_REG_PLLK2 0x26 +#define NAU8810_REG_PLLK3 0x27 +#define NAU8810_REG_ATTEN 0x28 +#define NAU8810_REG_INPUT_SIGNAL 0x2C +#define NAU8810_REG_PGAGAIN 0x2D +#define NAU8810_REG_ADCBOOST 0x2F +#define NAU8810_REG_OUTPUT 0x31 +#define NAU8810_REG_SPKMIX 0x32 +#define NAU8810_REG_SPKGAIN 0x36 +#define NAU8810_REG_MONOMIX 0x38 +#define NAU8810_REG_POWER4 0x3A +#define NAU8810_REG_TSLOTCTL1 0x3B +#define NAU8810_REG_TSLOTCTL2 0x3C +#define NAU8810_REG_DEVICE_REVID 0x3E +#define NAU8810_REG_I2C_DEVICEID 0x3F +#define NAU8810_REG_ADDITIONID 0x40 +#define NAU8810_REG_RESERVE 0x41 +#define NAU8810_REG_OUTCTL 0x45 +#define NAU8810_REG_ALC1ENHAN1 0x46 +#define NAU8810_REG_ALC1ENHAN2 0x47 +#define NAU8810_REG_MISCCTL 0x49 +#define NAU8810_REG_OUTTIEOFF 0x4B +#define NAU8810_REG_AGCP2POUT 0x4C +#define NAU8810_REG_AGCPOUT 0x4D +#define NAU8810_REG_AMTCTL 0x4E +#define NAU8810_REG_OUTTIEOFFMAN 0x4F +#define NAU8810_REG_MAX NAU8810_REG_OUTTIEOFFMAN + + +/* NAU8810_REG_POWER1 (0x1) */ +#define NAU8810_DCBUF_EN (0x1 << 8) +#define NAU8810_PLL_EN_SFT 5 +#define NAU8810_MICBIAS_EN_SFT 4 +#define NAU8810_ABIAS_EN (0x1 << 3) +#define NAU8810_IOBUF_EN (0x1 << 2) +#define NAU8810_REFIMP_MASK 0x3 +#define NAU8810_REFIMP_DIS 0x0 +#define NAU8810_REFIMP_80K 0x1 +#define NAU8810_REFIMP_300K 0x2 +#define NAU8810_REFIMP_3K 0x3 + +/* NAU8810_REG_POWER2 (0x2) */ +#define NAU8810_BST_EN_SFT 4 +#define NAU8810_PGA_EN_SFT 2 +#define NAU8810_ADC_EN_SFT 0 + +/* NAU8810_REG_POWER3 (0x3) */ +#define NAU8810_DAC_EN_SFT 0 +#define NAU8810_SPKMX_EN_SFT 2 +#define NAU8810_MOUTMX_EN_SFT 3 +#define NAU8810_PSPK_EN_SFT 5 +#define NAU8810_NSPK_EN_SFT 6 +#define NAU8810_MOUT_EN_SFT 7 + +/* NAU8810_REG_IFACE (0x4) */ +#define NAU8810_AIFMT_SFT 3 +#define NAU8810_AIFMT_MASK (0x3 << NAU8810_AIFMT_SFT) +#define NAU8810_AIFMT_RIGHT (0x0 << NAU8810_AIFMT_SFT) +#define NAU8810_AIFMT_LEFT (0x1 << NAU8810_AIFMT_SFT) +#define NAU8810_AIFMT_I2S (0x2 << NAU8810_AIFMT_SFT) +#define NAU8810_AIFMT_PCM_A (0x3 << NAU8810_AIFMT_SFT) +#define NAU8810_WLEN_SFT 5 +#define NAU8810_WLEN_MASK (0x3 << NAU8810_WLEN_SFT) +#define NAU8810_WLEN_16 (0x0 << NAU8810_WLEN_SFT) +#define NAU8810_WLEN_20 (0x1 << NAU8810_WLEN_SFT) +#define NAU8810_WLEN_24 (0x2 << NAU8810_WLEN_SFT) +#define NAU8810_WLEN_32 (0x3 << NAU8810_WLEN_SFT) +#define NAU8810_FSP_IF (0x1 << 7) +#define NAU8810_BCLKP_IB (0x1 << 8) + +/* NAU8810_REG_COMP (0x5) */ +#define NAU8810_ADDAP_SFT 0 +#define NAU8810_ADCCM_SFT 1 +#define NAU8810_DACCM_SFT 3 + +/* NAU8810_REG_CLOCK (0x6) */ +#define NAU8810_CLKIO_MASK 0x1 +#define NAU8810_CLKIO_SLAVE 0x0 +#define NAU8810_CLKIO_MASTER 0x1 +#define NAU8810_BCLKSEL_SFT 2 +#define NAU8810_BCLKSEL_MASK (0x7 << NAU8810_BCLKSEL_SFT) +#define NAU8810_BCLKDIV_1 (0x0 << NAU8810_BCLKSEL_SFT) +#define NAU8810_BCLKDIV_2 (0x1 << NAU8810_BCLKSEL_SFT) +#define NAU8810_BCLKDIV_4 (0x2 << NAU8810_BCLKSEL_SFT) +#define NAU8810_BCLKDIV_8 (0x3 << NAU8810_BCLKSEL_SFT) +#define NAU8810_BCLKDIV_16 (0x4 << NAU8810_BCLKSEL_SFT) +#define NAU8810_BCLKDIV_32 (0x5 << NAU8810_BCLKSEL_SFT) +#define NAU8810_MCLKSEL_SFT 5 +#define NAU8810_MCLKSEL_MASK (0x7 << NAU8810_MCLKSEL_SFT) +#define NAU8810_CLKM_SFT 8 +#define NAU8810_CLKM_MASK (0x1 << NAU8810_CLKM_SFT) +#define NAU8810_CLKM_MCLK (0x0 << NAU8810_CLKM_SFT) +#define NAU8810_CLKM_PLL (0x1 << NAU8810_CLKM_SFT) + +/* NAU8810_REG_SMPLR (0x7) */ +#define NAU8810_SMPLR_SFT 1 +#define NAU8810_SMPLR_MASK (0x7 << NAU8810_SMPLR_SFT) +#define NAU8810_SMPLR_48K (0x0 << NAU8810_SMPLR_SFT) +#define NAU8810_SMPLR_32K (0x1 << NAU8810_SMPLR_SFT) +#define NAU8810_SMPLR_24K (0x2 << NAU8810_SMPLR_SFT) +#define NAU8810_SMPLR_16K (0x3 << NAU8810_SMPLR_SFT) +#define NAU8810_SMPLR_12K (0x4 << NAU8810_SMPLR_SFT) +#define NAU8810_SMPLR_8K (0x5 << NAU8810_SMPLR_SFT) + +/* NAU8810_REG_DAC (0xA) */ +#define NAU8810_DACPL_SFT 0 +#define NAU8810_DACOS_SFT 3 +#define NAU8810_DEEMP_SFT 4 + +/* NAU8810_REG_DACGAIN (0xB) */ +#define NAU8810_DACGAIN_SFT 0 + +/* NAU8810_REG_ADC (0xE) */ +#define NAU8810_ADCPL_SFT 0 +#define NAU8810_ADCOS_SFT 3 +#define NAU8810_HPF_SFT 4 +#define NAU8810_HPFEN_SFT 8 + +/* NAU8810_REG_ADCGAIN (0xF) */ +#define NAU8810_ADCGAIN_SFT 0 + +/* NAU8810_REG_EQ1 (0x12) */ +#define NAU8810_EQ1GC_SFT 0 +#define NAU8810_EQ1CF_SFT 5 +#define NAU8810_EQM_SFT 8 + +/* NAU8810_REG_EQ2 (0x13) */ +#define NAU8810_EQ2GC_SFT 0 +#define NAU8810_EQ2CF_SFT 5 +#define NAU8810_EQ2BW_SFT 8 + +/* NAU8810_REG_EQ3 (0x14) */ +#define NAU8810_EQ3GC_SFT 0 +#define NAU8810_EQ3CF_SFT 5 +#define NAU8810_EQ3BW_SFT 8 + +/* NAU8810_REG_EQ4 (0x15) */ +#define NAU8810_EQ4GC_SFT 0 +#define NAU8810_EQ4CF_SFT 5 +#define NAU8810_EQ4BW_SFT 8 + +/* NAU8810_REG_EQ5 (0x16) */ +#define NAU8810_EQ5GC_SFT 0 +#define NAU8810_EQ5CF_SFT 5 + +/* NAU8810_REG_DACLIM1 (0x18) */ +#define NAU8810_DACLIMATK_SFT 0 +#define NAU8810_DACLIMDCY_SFT 4 +#define NAU8810_DACLIMEN_SFT 8 + +/* NAU8810_REG_DACLIM2 (0x19) */ +#define NAU8810_DACLIMBST_SFT 0 +#define NAU8810_DACLIMTHL_SFT 4 + +/* NAU8810_REG_ALC1 (0x20) */ +#define NAU8810_ALCMINGAIN_SFT 0 +#define NAU8810_ALCMXGAIN_SFT 3 +#define NAU8810_ALCEN_SFT 8 + +/* NAU8810_REG_ALC2 (0x21) */ +#define NAU8810_ALCSL_SFT 0 +#define NAU8810_ALCHT_SFT 4 +#define NAU8810_ALCZC_SFT 8 + +/* NAU8810_REG_ALC3 (0x22) */ +#define NAU8810_ALCATK_SFT 0 +#define NAU8810_ALCDCY_SFT 4 +#define NAU8810_ALCM_SFT 8 + +/* NAU8810_REG_NOISEGATE (0x23) */ +#define NAU8810_ALCNTH_SFT 0 +#define NAU8810_ALCNEN_SFT 3 + +/* NAU8810_REG_PLLN (0x24) */ +#define NAU8810_PLLN_MASK 0xF +#define NAU8810_PLLMCLK_DIV2 (0x1 << 4) + +/* NAU8810_REG_PLLK1 (0x25) */ +#define NAU8810_PLLK1_SFT 18 +#define NAU8810_PLLK1_MASK 0x3F + +/* NAU8810_REG_PLLK2 (0x26) */ +#define NAU8810_PLLK2_SFT 9 +#define NAU8810_PLLK2_MASK 0x1FF + +/* NAU8810_REG_PLLK3 (0x27) */ +#define NAU8810_PLLK3_MASK 0x1FF + +/* NAU8810_REG_INPUT_SIGNAL (0x2C) */ +#define NAU8810_PMICPGA_SFT 0 +#define NAU8810_NMICPGA_SFT 1 + +/* NAU8810_REG_PGAGAIN (0x2D) */ +#define NAU8810_PGAGAIN_SFT 0 +#define NAU8810_PGAMT_SFT 6 +#define NAU8810_PGAZC_SFT 7 + +/* NAU8810_REG_ADCBOOST (0x2F) */ +#define NAU8810_PMICBSTGAIN_SFT 4 +#define NAU8810_PGABST_SFT 8 + +/* NAU8810_REG_SPKMIX (0x32) */ +#define NAU8810_DACSPK_SFT 0 +#define NAU8810_BYPSPK_SFT 1 + +/* NAU8810_REG_SPKGAIN (0x36) */ +#define NAU8810_SPKGAIN_SFT 0 +#define NAU8810_SPKMT_SFT 6 +#define NAU8810_SPKZC_SFT 7 + +/* NAU8810_REG_MONOMIX (0x38) */ +#define NAU8810_DACMOUT_SFT 0 +#define NAU8810_BYPMOUT_SFT 1 +#define NAU8810_MOUTMXMT_SFT 6 + + +/* System Clock Source */ +enum { + NAU8810_CLK_MCLK, + NAU8810_CLK_PLL, +}; + +/* Clock divider Id's */ +enum { + NAU8810_MCLK_DIV_PLL, + NAU8810_MCLK_DIV_MCLK, + NAU8810_BCLK_DIV, +}; + +struct nau8810_pll { + int pre_factor; + int mclk_scaler; + int pll_frac; + int pll_int; +}; + +struct nau8810 { + struct device *dev; + struct regmap *regmap; + struct nau8810_pll pll; + int sysclk; + int div_id; +}; + +#endif -- 2.6.4

2 8

[alsa-devel] [PATCH 00/17] Baytrail audio fixes
by Pierre-Louis Bossart 18 Aug '16

18 Aug '16

This second set of patches solves problems with Baytrail-CR, specifically the auto-detection of IRQ index and SSP0 routing. These patches enable sound on the Asus T100TAF with the support of the MCLK handled by the clock framework (Credits to Irina Tirdea) If you prefer git access, the patches are available at https://github.com/plbossart/sound/commits/t100taf-6 The corresponding UCM file is at https://github.com/plbossart/UCM/commits/t100-test Thanks to Luka Karinja and Antonio Ospite for early tests and suggestions, as well as Liam Girdwood and Vinod Koul for internal code reviews. Additional fixes for UCM files will be coming soon to support mono speakers, IN3 input and other fixes. Irina Tirdea (3): clk: x86: Add Atom PMC platform clocks ASoC: Intel: bytcr_rt5640: add MCLK support AsoC: Intel: Add quirks for MinnowBoard MAX Pierre-Louis Bossart (14): ASoC: Intel: bytcr-rt5640: add Asus T100TAF quirks ASoC: Intel: bytcr_rt5640: quirk for mono speaker ASoC: Intel: bytcr_rt5640: enable differential mic quirk ASoC: Intel: Atom: auto-detection of Baytrail-CR ASoC: Intel: Atom: add definitions for modem/SSP0 interface ASoC: Intel: atom: enable configuration of SSP0 ASoC: Intel: bytcr_rt5640: add SSP2_AIF2 routing ASoC: Intel: bytcr_rt56040: additional routing quirks ASoC: Intel: bytcr_rt5640: fix dai/clock setup for SSP0 routing ASoC: Intel: bytcr_rt5640: default routing and quirks on Baytrail-CR ASoC: Intel: bytcr_rt5640: add IN3 map ASoC: rt5640: add internal clock source support ASoC: bytcr_rt5640: Add quirk for Teclast X98 Air 3G tablet ASoC: Intel: bytcr_rt5640: log quirks arch/x86/Kconfig | 1 + arch/x86/include/asm/pmc_atom.h | 6 + arch/x86/platform/atom/pmc_atom.c | 55 +++- drivers/clk/x86/Makefile | 1 + drivers/clk/x86/clk-byt-plt.c | 413 +++++++++++++++++++++++++ sound/soc/codecs/rt5640.c | 3 + sound/soc/codecs/rt5640.h | 1 + sound/soc/intel/atom/sst-atom-controls.c | 32 +- sound/soc/intel/atom/sst-atom-controls.h | 6 + sound/soc/intel/atom/sst/sst_acpi.c | 82 ++++- sound/soc/intel/boards/bytcr_rt5640.c | 496 ++++++++++++++++++++++++++++--- 11 files changed, 1036 insertions(+), 60 deletions(-) create mode 100644 drivers/clk/x86/clk-byt-plt.c -- 2.5.0

2 39

[alsa-devel] [PATCH for 4.8] Revert "ASoC: omap-mcpdm: Add support for pdmclk clock handling"
by Peter Ujfalusi 18 Aug '16

18 Aug '16

This reverts commit 65aca64d05b5eaa5ce15e18b458a8d338ddbd478. The patches for twl6040 MFD and clk missed the merge window and causing the McPDM driver to never probe since it is put back to the deferred list because the missing drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> --- Mark, OMAP4/5 audio regressed in 4.8 due to the hack that the twl6040 MFD and clk driver changes were not take in time. The only clean solution I can think is to revert the pdmclk clock handling from the McPDM driver for now. Regards, Peter Documentation/devicetree/bindings/sound/omap-mcpdm.txt | 10 ---------- sound/soc/omap/omap-mcpdm.c | 17 ----------------- 2 files changed, 27 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt index 6f6c2f8e908d..0741dff048dd 100644 --- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt @@ -8,8 +8,6 @@ Required properties: - interrupts: Interrupt number for McPDM - interrupt-parent: The parent interrupt controller - ti,hwmods: Name of the hwmod associated to the McPDM -- clocks: phandle for the pdmclk provider, likely <&twl6040> -- clock-names: Must be "pdmclk" Example: @@ -21,11 +19,3 @@ mcpdm: mcpdm@40132000 { interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; - -In board DTS file the pdmclk needs to be added: - -&mcpdm { - clocks = <&twl6040>; - clock-names = "pdmclk"; - status = "okay"; -}; diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index e7cdc51fd806..74d6e6fdcfd0 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -31,7 +31,6 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/clk.h> #include <linux/slab.h> #include <linux/pm_runtime.h> #include <linux/of_device.h> @@ -55,7 +54,6 @@ struct omap_mcpdm { unsigned long phys_base; void __iomem *io_base; int irq; - struct clk *pdmclk; struct mutex mutex; @@ -390,7 +388,6 @@ static int omap_mcpdm_probe(struct snd_soc_dai *dai) struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai); int ret; - clk_prepare_enable(mcpdm->pdmclk); pm_runtime_enable(mcpdm->dev); /* Disable lines while request is ongoing */ @@ -425,7 +422,6 @@ static int omap_mcpdm_remove(struct snd_soc_dai *dai) pm_runtime_disable(mcpdm->dev); - clk_disable_unprepare(mcpdm->pdmclk); return 0; } @@ -445,8 +441,6 @@ static int omap_mcpdm_suspend(struct snd_soc_dai *dai) mcpdm->pm_active_count++; } - clk_disable_unprepare(mcpdm->pdmclk); - return 0; } @@ -454,8 +448,6 @@ static int omap_mcpdm_resume(struct snd_soc_dai *dai) { struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai); - clk_prepare_enable(mcpdm->pdmclk); - if (mcpdm->pm_active_count) { while (mcpdm->pm_active_count--) pm_runtime_get_sync(mcpdm->dev); @@ -549,15 +541,6 @@ static int asoc_mcpdm_probe(struct platform_device *pdev) mcpdm->dev = &pdev->dev; - mcpdm->pdmclk = devm_clk_get(&pdev->dev, "pdmclk"); - if (IS_ERR(mcpdm->pdmclk)) { - if (PTR_ERR(mcpdm->pdmclk) == -EPROBE_DEFER) - return -EPROBE_DEFER; - dev_warn(&pdev->dev, "Error getting pdmclk (%ld)!\n", - PTR_ERR(mcpdm->pdmclk)); - mcpdm->pdmclk = NULL; - } - ret = devm_snd_soc_register_component(&pdev->dev, &omap_mcpdm_component, &omap_mcpdm_dai, 1); -- 2.9.2

2 1

[alsa-devel] [PATCH] ASoC: Intel: sst: fix ix spelling mistake: "capablities" -> "capabilites"
by Colin King 18 Aug '16

18 Aug '16

From: Colin Ian King <colin.king(a)canonical.com> trivial fix to spelling mistake in dev_err message and reformat code to avoid being over 80 chars wide per line Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/soc/intel/atom/sst/sst.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/atom/sst/sst.c b/sound/soc/intel/atom/sst/sst.c index a4b458e..498b5f7 100644 --- a/sound/soc/intel/atom/sst/sst.c +++ b/sound/soc/intel/atom/sst/sst.c @@ -190,7 +190,8 @@ int sst_driver_ops(struct intel_sst_drv *sst) default: dev_err(sst->dev, - "SST Driver capablities missing for dev_id: %x", sst->dev_id); + "SST Driver capabilities missing for dev_id: %x", + sst->dev_id); return -EINVAL; }; } -- 2.8.1

2 1

[alsa-devel] [PATCH 0/3] Baytrail followup patches
by Pierre-Louis Bossart 17 Aug '16

17 Aug '16

fixes for warnings detected by 0-Day New quirk for Acer Aspire platforms Resending clock framework support (for-next audio not working on all platforms enabling MCLK if this patch is not applied) Irina Tirdea (1): clk: x86: Add Atom PMC platform clocks Pierre-Louis Bossart (2): ASoC: Intel: atom: fix 0-day warnings ASoC: Intel: bytcr_rt5640: quirk for Acer Aspire SWS-012 arch/x86/Kconfig | 1 + arch/x86/include/asm/pmc_atom.h | 6 + arch/x86/platform/atom/pmc_atom.c | 55 ++++- drivers/clk/x86/Makefile | 1 + drivers/clk/x86/clk-byt-plt.c | 413 ++++++++++++++++++++++++++++++++++ sound/soc/intel/atom/sst/sst_acpi.c | 2 +- sound/soc/intel/boards/bytcr_rt5640.c | 15 +- 7 files changed, 487 insertions(+), 6 deletions(-) create mode 100644 drivers/clk/x86/clk-byt-plt.c -- 2.7.4

2 6

[alsa-devel] [PATCH] ASoC: fsl_sai: Use 'np' variable
by Fabio Estevam 17 Aug '16

17 Aug '16

From: Fabio Estevam <fabio.estevam(a)nxp.com> The 'np' variable is already assigned to 'pdev->dev.of_node', so use it to improve readability. No functional change. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- sound/soc/fsl/fsl_sai.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 2147994..9fadf7e 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -801,8 +801,8 @@ static int fsl_sai_probe(struct platform_device *pdev) sai->pdev = pdev; - if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx6sx-sai") || - of_device_is_compatible(pdev->dev.of_node, "fsl,imx6ul-sai")) + if (of_device_is_compatible(np, "fsl,imx6sx-sai") || + of_device_is_compatible(np, "fsl,imx6ul-sai")) sai->sai_on_imx = true; sai->is_lsb_first = of_property_read_bool(np, "lsb-first"); @@ -883,7 +883,7 @@ static int fsl_sai_probe(struct platform_device *pdev) } if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) && - of_device_is_compatible(pdev->dev.of_node, "fsl,imx6ul-sai")) { + of_device_is_compatible(np, "fsl,imx6ul-sai")) { gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); if (IS_ERR(gpr)) { dev_err(&pdev->dev, "cannot find iomuxc registers\n"); -- 1.9.1

2 1