December 2016 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 1/7] ASoC: wm9705: Remove unused DAI ID defines
by Lars-Peter Clausen 06 Jan '17

06 Jan '17

The DAI ID defines are back from the time when DAIs were referenced by a numerical ID. These days a string is used for matching instead and the defines are unused. The last user of these defines was removed in commit f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support"). So remove the defines as well. This also means the wm9705.h file no longer has any content and can be removed. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/codecs/wm9705.c | 2 -- sound/soc/codecs/wm9705.h | 11 ----------- sound/soc/pxa/e740_wm9705.c | 1 - sound/soc/pxa/e750_wm9705.c | 1 - 4 files changed, 15 deletions(-) delete mode 100644 sound/soc/codecs/wm9705.h diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index dcdd055..266b6ec 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -20,8 +20,6 @@ #include <sound/initval.h> #include <sound/soc.h> -#include "wm9705.h" - #define WM9705_VENDOR_ID 0x574d4c05 #define WM9705_VENDOR_ID_MASK 0xffffffff diff --git a/sound/soc/codecs/wm9705.h b/sound/soc/codecs/wm9705.h deleted file mode 100644 index 23ea9ce..0000000 --- a/sound/soc/codecs/wm9705.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * wm9705.h -- WM9705 Soc Audio driver - */ - -#ifndef _WM9705_H -#define _WM9705_H - -#define WM9705_DAI_AC97_HIFI 0 -#define WM9705_DAI_AC97_AUX 1 - -#endif diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c index 1de8765..086c37a 100644 --- a/sound/soc/pxa/e740_wm9705.c +++ b/sound/soc/pxa/e740_wm9705.c @@ -22,7 +22,6 @@ #include <asm/mach-types.h> -#include "../codecs/wm9705.h" #include "pxa2xx-ac97.h" diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c index b7eb7cd..7823278 100644 --- a/sound/soc/pxa/e750_wm9705.c +++ b/sound/soc/pxa/e750_wm9705.c @@ -22,7 +22,6 @@ #include <asm/mach-types.h> -#include "../codecs/wm9705.h" #include "pxa2xx-ac97.h" static int e750_spk_amp_event(struct snd_soc_dapm_widget *w, -- 2.1.4

4 12

[alsa-devel] [PATCH v3 00/13] ASoC: Intel: Skylake: Driver updates
by jeeja.kp＠intel.com 06 Jan '17

06 Jan '17

From: Jeeja KP <jeeja.kp(a)intel.com> This patch series includes driver updates for the handling scenarios during System S0/S3 transitions when audio stream is stopped during system. o move DMA configuration in DSP Gateway Module widget event handler to ensure DMA is configured after resume. o Enable SSP MLCK using Supply widget. This will ensure the MCLK is enabled when the widget is power on. o Check DMA decouple register state before coupling/decoupling the DMA. o In case of HDMI pass-through pipe, reset only the FE Pipe when stream in in XRUN state. o Resume the stream from HW renderer position. o HDMI Codec pin and converter state need to be restored when stream is resumed. Changes in v2: - Addressed Mark's comment on patch 1, split this into 2 as this had additional changes other than configuring the DMA. - Addressed Takashi's comment on the usage of snd_hdac_updatel() Changes in v3: - Addressed Takashi's comment on superfluous shit used in reading the value of PPCTL register and also cleaned the condition for updating the reg value. Jeeja KP (13): ASoC: Intel: Skylake: Update link_index and format in pipe params ASoC: Intel: Skylake: Add helper function to setup host/link dma ASoC: Intel: Skylake: Configure DMA in PRE_PMD handler of Mixer ASoC: Intel: Skylake: Removed unused skl_get_format() ALSA: hda: check stream decoupled register state ASoC: Intel: Skylake: Add set_tristate DAI ops to enable SSP MCLK ASoC: Intel: Skylake: Remove unused SSP BE prepare DAI ops ASoC: Intel: Skylake: Add supply widget as non DSP widget ASoC: Intel: Skylake: Add supply widget in skl_nau_max machine ASoC: Intel: Skylake: Add supply widget in bxt_da_max machine ASoC: Intel: Skylake: Don't reset pass-through pipe in BE prepare ASoC: Intel: Skylake: set the resume point to LPIB ASoC: hdac_hdmi: Enable pin and converter in prepare sound/hda/ext/hdac_ext_stream.c | 15 +- sound/soc/codecs/hdac_hdmi.c | 28 ++-- sound/soc/intel/boards/bxt_da7219_max98357a.c | 34 ++++ sound/soc/intel/boards/skl_nau88l25_max98357a.c | 34 ++++ sound/soc/intel/skylake/skl-pcm.c | 210 +++++++++++++----------- sound/soc/intel/skylake/skl-topology.c | 27 ++- sound/soc/intel/skylake/skl-topology.h | 6 + 7 files changed, 240 insertions(+), 114 deletions(-) -- 2.5.0

4 17

[alsa-devel] [PATCH] ASoC: pcm5102a: Provide a menu selection text
by Jörg Krause 06 Jan '17

06 Jan '17

Provide a menu selection text so that users can enable, disable or mark it as module in menuconfig. Signed-off-by: Jörg Krause <joerg.krause(a)embedded.rocks> --- sound/soc/codecs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 084c2aa..9ee9591 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -624,7 +624,7 @@ config SND_SOC_PCM3168A_SPI select REGMAP_SPI config SND_SOC_PCM5102A - tristate + tristate "Texas Instruments PCM5102A CODEC" config SND_SOC_PCM512x tristate -- 2.10.2

2 6

Re: [alsa-devel] Stream format conversion in SoC driver
by Clemens Ladisch 05 Jan '17

05 Jan '17

Giedrius Trainavičius wrote: >It uses I2S for sending / receiving audio. However, the master clock on our >sound card is generated by the ADC, which supports only 24 bit data, so >getting other sample formats is not possible. The I2S sample format need not be the same as what the DMA controller reads/writes from/to memory. >A question on 'plug' - it accepts 'nearest' as the argument for format, >rate, what happens in case the slave pcm stream supports the exact same >format as requested by user software? The plug plugin instantiates the actual conversion plugins only as needed; with no conversion, it vanishes entirely. Regards, Clemens

2 4

[alsa-devel] [PATCH v6 0/3] Add platform clock for BayTrail platforms
by Irina Tirdea 05 Jan '17

05 Jan '17

These patches specifically enable the audio MCLK required by Baytrail CR devices. It is the remaining part of a bigger set of patches (already merged in Mark's tree) that enable sound for Baytrail CR devices (especially Asus T100TAF) [1]. They include the clock driver and enabling the clock in the pmc_atom code (along with moving of the non-architectural pmc_atom driver code into drivers/platform/x86). [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-August/111704.html Changes from v5: - fix build error reported by kbuild test robot - split the clk driver code from x86 platform changes Changes from v4: - move the pmc_atom driver from arch/x86/platform/atom to drivers/platform/x86 Changes from v3: - replace devm_kzalloc with devm_kcalloc - add x86 architecture maintainers Changes from v2: - move clk platform data structures to a separate include file - store clk_hw pointer for the fixed rate clocks Changes from v1: - register the clk device as child of pmc device - pass iomem pointer from pmc driver to clk driver to avoid using pmc_atom_read()/write() and use readl/writel API instead - use devm_clk_hw_register/clkdev_hw_create instead of clk_register/clkdev_create Irina Tirdea (3): clk: x86: Add Atom PMC platform clocks arch/x86/platform/atom: Move pmc_atom to drivers/platform/x86 platform/x86: Enable Atom PMC platform clocks arch/x86/Kconfig | 4 - arch/x86/platform/atom/Makefile | 1 - drivers/acpi/acpi_lpss.c | 2 +- drivers/clk/x86/Makefile | 3 + drivers/clk/x86/clk-byt-plt.c | 380 +++++++++++++++++++++ drivers/platform/x86/Kconfig | 5 + drivers/platform/x86/Makefile | 1 + .../atom => drivers/platform/x86}/pmc_atom.c | 81 ++++- include/linux/platform_data/x86/clk-byt-plt.h | 31 ++ .../linux/platform_data/x86}/pmc_atom.h | 3 + 10 files changed, 500 insertions(+), 11 deletions(-) create mode 100644 drivers/clk/x86/clk-byt-plt.c rename {arch/x86/platform/atom => drivers/platform/x86}/pmc_atom.c (88%) create mode 100644 include/linux/platform_data/x86/clk-byt-plt.h rename {arch/x86/include/asm => include/linux/platform_data/x86}/pmc_atom.h (98%) -- 1.9.1

6 29

[alsa-devel] [PATCH] drm: sti: allow audio playback on HDMI even if disabled.
by Arnaud Pouliquen 04 Jan '17

04 Jan '17

This fix allows to play audio while HDMI is disconnected. When HDMI is disable, audio configuration is stored and samples are dropped (by HDMI IP). When HDMI is enabled, audio HDMI configuration is applied and samples are outputted on HDMI wire. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> --- drivers/gpu/drm/sti/sti_hdmi.c | 205 ++++++++++++++++++++--------------------- 1 file changed, 101 insertions(+), 104 deletions(-) diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index 376b076..9c0025e 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -788,6 +788,95 @@ static void sti_hdmi_disable(struct drm_bridge *bridge) hdmi->enabled = false; } +/** + * sti_hdmi_audio_get_non_coherent_n() - get N parameter for non-coherent + * clocks. None-coherent clocks means that audio and TMDS clocks have not the + * same source (drifts between clocks). In this case assumption is that CTS is + * automatically calculated by hardware. + * + * @audio_fs: audio frame clock frequency in Hz + * + * Values computed are based on table described in HDMI specification 1.4b + * + * Returns n value. + */ +static int sti_hdmi_audio_get_non_coherent_n(unsigned int audio_fs) +{ + unsigned int n; + + switch (audio_fs) { + case 32000: + n = 4096; + break; + case 44100: + n = 6272; + break; + case 48000: + n = 6144; + break; + case 88200: + n = 6272 * 2; + break; + case 96000: + n = 6144 * 2; + break; + case 176400: + n = 6272 * 4; + break; + case 192000: + n = 6144 * 4; + break; + default: + /* Not pre-defined, recommended value: 128 * fs / 1000 */ + n = (audio_fs * 128) / 1000; + } + + return n; +} + +static int hdmi_audio_configure(struct sti_hdmi *hdmi) +{ + int audio_cfg, n; + struct hdmi_audio_params *params = &hdmi->audio; + struct hdmi_audio_infoframe *info = &params->cea; + + DRM_DEBUG_DRIVER("\n"); + + if (!hdmi->enabled) + return 0; + + /* update N parameter */ + n = sti_hdmi_audio_get_non_coherent_n(params->sample_rate); + + DRM_DEBUG_DRIVER("Audio rate = %d Hz, TMDS clock = %d Hz, n = %d\n", + params->sample_rate, hdmi->mode.clock * 1000, n); + hdmi_write(hdmi, n, HDMI_AUDN); + + /* update HDMI registers according to configuration */ + audio_cfg = HDMI_AUD_CFG_SPDIF_DIV_2 | HDMI_AUD_CFG_DTS_INVALID | + HDMI_AUD_CFG_ONE_BIT_INVALID; + + switch (info->channels) { + case 8: + audio_cfg |= HDMI_AUD_CFG_CH78_VALID; + case 6: + audio_cfg |= HDMI_AUD_CFG_CH56_VALID; + case 4: + audio_cfg |= HDMI_AUD_CFG_CH34_VALID | HDMI_AUD_CFG_8CH; + case 2: + audio_cfg |= HDMI_AUD_CFG_CH12_VALID; + break; + default: + DRM_ERROR("ERROR: Unsupported number of channels (%d)!\n", + info->channels); + return -EINVAL; + } + + hdmi_write(hdmi, audio_cfg, HDMI_AUDIO_CFG); + + return hdmi_audio_infoframe_config(hdmi); +} + static void sti_hdmi_pre_enable(struct drm_bridge *bridge) { struct sti_hdmi *hdmi = bridge->driver_private; @@ -826,9 +915,12 @@ static void sti_hdmi_pre_enable(struct drm_bridge *bridge) if (hdmi_avi_infoframe_config(hdmi)) DRM_ERROR("Unable to configure AVI infoframe\n"); - /* Program AUDIO infoframe */ - if (hdmi_audio_infoframe_config(hdmi)) - DRM_ERROR("Unable to configure AUDIO infoframe\n"); + if (hdmi->audio.enabled) { + if (hdmi_audio_configure(hdmi)) + DRM_ERROR("Unable to configure audio\n"); + } else { + hdmi_audio_infoframe_config(hdmi); + } /* Program VS infoframe */ if (hdmi_vendor_infoframe_config(hdmi)) @@ -1078,97 +1170,6 @@ static struct drm_encoder *sti_hdmi_find_encoder(struct drm_device *dev) return NULL; } -/** - * sti_hdmi_audio_get_non_coherent_n() - get N parameter for non-coherent - * clocks. None-coherent clocks means that audio and TMDS clocks have not the - * same source (drifts between clocks). In this case assumption is that CTS is - * automatically calculated by hardware. - * - * @audio_fs: audio frame clock frequency in Hz - * - * Values computed are based on table described in HDMI specification 1.4b - * - * Returns n value. - */ -static int sti_hdmi_audio_get_non_coherent_n(unsigned int audio_fs) -{ - unsigned int n; - - switch (audio_fs) { - case 32000: - n = 4096; - break; - case 44100: - n = 6272; - break; - case 48000: - n = 6144; - break; - case 88200: - n = 6272 * 2; - break; - case 96000: - n = 6144 * 2; - break; - case 176400: - n = 6272 * 4; - break; - case 192000: - n = 6144 * 4; - break; - default: - /* Not pre-defined, recommended value: 128 * fs / 1000 */ - n = (audio_fs * 128) / 1000; - } - - return n; -} - -static int hdmi_audio_configure(struct sti_hdmi *hdmi, - struct hdmi_audio_params *params) -{ - int audio_cfg, n; - struct hdmi_audio_infoframe *info = &params->cea; - - DRM_DEBUG_DRIVER("\n"); - - if (!hdmi->enabled) - return 0; - - /* update N parameter */ - n = sti_hdmi_audio_get_non_coherent_n(params->sample_rate); - - DRM_DEBUG_DRIVER("Audio rate = %d Hz, TMDS clock = %d Hz, n = %d\n", - params->sample_rate, hdmi->mode.clock * 1000, n); - hdmi_write(hdmi, n, HDMI_AUDN); - - /* update HDMI registers according to configuration */ - audio_cfg = HDMI_AUD_CFG_SPDIF_DIV_2 | HDMI_AUD_CFG_DTS_INVALID | - HDMI_AUD_CFG_ONE_BIT_INVALID; - - switch (info->channels) { - case 8: - audio_cfg |= HDMI_AUD_CFG_CH78_VALID; - case 6: - audio_cfg |= HDMI_AUD_CFG_CH56_VALID; - case 4: - audio_cfg |= HDMI_AUD_CFG_CH34_VALID | HDMI_AUD_CFG_8CH; - case 2: - audio_cfg |= HDMI_AUD_CFG_CH12_VALID; - break; - default: - DRM_ERROR("ERROR: Unsupported number of channels (%d)!\n", - info->channels); - return -EINVAL; - } - - hdmi_write(hdmi, audio_cfg, HDMI_AUDIO_CFG); - - hdmi->audio = *params; - - return hdmi_audio_infoframe_config(hdmi); -} - static void hdmi_audio_shutdown(struct device *dev, void *data) { struct sti_hdmi *hdmi = dev_get_drvdata(dev); @@ -1192,17 +1193,9 @@ static int hdmi_audio_hw_params(struct device *dev, { struct sti_hdmi *hdmi = dev_get_drvdata(dev); int ret; - struct hdmi_audio_params audio = { - .sample_width = params->sample_width, - .sample_rate = params->sample_rate, - .cea = params->cea, - }; DRM_DEBUG_DRIVER("\n"); - if (!hdmi->enabled) - return 0; - if ((daifmt->fmt != HDMI_I2S) || daifmt->bit_clk_inv || daifmt->frame_clk_inv || daifmt->bit_clk_master || daifmt->frame_clk_master) { @@ -1213,9 +1206,13 @@ static int hdmi_audio_hw_params(struct device *dev, return -EINVAL; } - audio.enabled = true; + hdmi->audio.sample_width = params->sample_width; + hdmi->audio.sample_rate = params->sample_rate; + hdmi->audio.cea = params->cea; + + hdmi->audio.enabled = true; - ret = hdmi_audio_configure(hdmi, &audio); + ret = hdmi_audio_configure(hdmi); if (ret < 0) return ret; -- 1.9.1

2 1

[alsa-devel] [PATCH] ASoC : fsl_ssi : Correct the condition to check AC97 mode
by Harisangam, Sharvari (S.) 04 Jan '17

04 Jan '17

Corrected the condition to check if ssi is configured for AC97 mode. Other modes like dsp_a also satisfy the ANDing condition. Signed-off-by: Sharvari Harisangam <sharvari.harisangam(a)visteon.com> --- sound/soc/fsl/fsl_ssi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index ca6f6b1..4fbb7a2 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -317,7 +317,8 @@ MODULE_DEVICE_TABLE(of, fsl_ssi_ids); static bool fsl_ssi_is_ac97(struct fsl_ssi_private *ssi_private) { - return !!(ssi_private->dai_fmt & SND_SOC_DAIFMT_AC97); + return !!(ssi_private->dai_fmt & SND_SOC_DAIFMT_AC97) == + SND_SOC_DAIFMT_AC97; } static bool fsl_ssi_is_i2s_master(struct fsl_ssi_private *ssi_private) @@ -1016,7 +1017,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, CCSR_SSI_SCR_TCH_EN); } - if (fmt & SND_SOC_DAIFMT_AC97) + if ((fmt & SND_SOC_DAIFMT_AC97) == SND_SOC_DAIFMT_AC97) fsl_ssi_setup_ac97(ssi_private); return 0; -- 2.7.4

5 5

[alsa-devel] [PATCH - alsa-lib 1/1] Change card/pid get functions to return -ENOSYS if the kernel is too old
by Adam Goode 03 Jan '17

03 Jan '17

When trying to get the pid or card of a client, the get functions will return -1 if there is no pid or card for a client. Clients have zero or one of these, so -1 is correct for these cases. But we also need to detect the case where the kernel cannot tell us if there is a card or pid, so that userspace can fallback to probing this information in the old way. Signed-off-by: Adam Goode <agoode(a)google.com> diff --git a/src/seq/seq.c b/src/seq/seq.c index 4405e68..7de1e81 100644 --- a/src/seq/seq.c +++ b/src/seq/seq.c @@ -1522,9 +1522,10 @@ int snd_seq_client_info_get_error_bounce(const snd_seq_client_info_t *info) } /** - * \brief Get the sound card number. + * \brief Get the sound card number if the kernel supports this. * \param info client_info container - * \return card number or -1 if value is not available. + * \return card number, -1 if there is no card for this client, + * or \c -ENOSYS if the kernel does not have support for this operation * * Only available for SND_SEQ_KERNEL_CLIENT clients. */ @@ -1535,9 +1536,10 @@ int snd_seq_client_info_get_card(const snd_seq_client_info_t *info) } /** - * \brief Get the owning PID. + * \brief Get the owning PID if the kernel supports this. * \param info client_info container - * \return pid or -1 if value is not available. + * \return pid, -1 if there is no PID for this client, + * or \c -ENOSYS if the kernel does not have support for this operation * * Only available for SND_SEQ_USER_CLIENT clients. */ diff --git a/src/seq/seq_hw.c b/src/seq/seq_hw.c index 578ef12..a1d1e4a 100644 --- a/src/seq/seq_hw.c +++ b/src/seq/seq_hw.c @@ -102,8 +102,8 @@ static int snd_seq_hw_get_client_info(snd_seq_t *seq, snd_seq_client_info_t * in return -errno; } if (hw->version < SNDRV_PROTOCOL_VERSION(1, 0, 2)) { - info->card = -1; - info->pid = -1; + info->card = -ENOSYS; + info->pid = -ENOSYS; } return 0; } @@ -374,8 +374,8 @@ static int snd_seq_hw_query_next_client(snd_seq_t *seq, snd_seq_client_info_t *i return -errno; } if (hw->version < SNDRV_PROTOCOL_VERSION(1, 0, 2)) { - info->card = -1; - info->pid = -1; + info->card = -ENOSYS; + info->pid = -ENOSYS; } return 0; } -- 2.8.0.rc3.226.g39d4020

5 16

[alsa-devel] [PATCH v4] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
by Matt Ranostay 03 Jan '17

03 Jan '17

We can get audio errors if hitting deeper idle states on omaps: [alsa.c:230] error: Fatal problem with alsa output, error -5. [audio.c:614] error: Error in writing audio (Input/output error?)! This seems to happen with off mode idle enabled as power for the whole SoC may get cut off between filling the McBSP fifo using DMA. While active DMA blocks deeper idle states in hardware, McBSP activity does not seem to do so. Basing the QoS latency calculation on the FIFO size, threshold, sample rate, and channels. Based on the original patch by Tony Lindgren Link: https://patchwork.kernel.org/patch/9305867/ Cc: Tony Lindgren <tony(a)atomide.com> Cc: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Matt Ranostay <matt(a)ranostay.consulting> --- Changes from v1: * add calculations for latency per number of FIFO locations Changes from v2: * add missing mcbsp.h header change Changes from v3: * base the latency calculations on threshold, buffer size, sample rate, and channels sound/soc/omap/mcbsp.c | 19 +++++++++++++++++++ sound/soc/omap/mcbsp.h | 3 +++ sound/soc/omap/omap-mcbsp.c | 21 ++++++++++++++++++++- 3 files changed, 42 insertions(+), 1 deletion(-) diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c index 06fec5699cc8..8f792e714894 100644 --- a/sound/soc/omap/mcbsp.c +++ b/sound/soc/omap/mcbsp.c @@ -25,6 +25,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/pm_runtime.h> +#include <linux/pm_qos.h> #include <linux/platform_data/asoc-ti-mcbsp.h> @@ -640,9 +641,19 @@ void omap_mcbsp_free(struct omap_mcbsp *mcbsp) */ void omap_mcbsp_start(struct omap_mcbsp *mcbsp, int tx, int rx) { + struct pm_qos_request *pm_qos_req = &mcbsp->pm_qos_req; int enable_srg = 0; u16 w; + /* Prevent omap hardware from hitting off between fifo fills */ + if (mcbsp->latency) { + if (pm_qos_request_active(pm_qos_req)) + pm_qos_update_request(pm_qos_req, mcbsp->latency); + else + pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + mcbsp->latency); + } + if (mcbsp->st_data) omap_st_start(mcbsp); @@ -731,6 +742,11 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx) if (mcbsp->st_data) omap_st_stop(mcbsp); + + if (mcbsp->active == 1 && pm_qos_request_active(&mcbsp->pm_qos_req)) { + pm_qos_remove_request(&mcbsp->pm_qos_req); + mcbsp->latency = 0; + } } int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) @@ -1098,6 +1114,9 @@ int omap_mcbsp_init(struct platform_device *pdev) void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp) { + if (pm_qos_request_active(&mcbsp->pm_qos_req)) + pm_qos_remove_request(&mcbsp->pm_qos_req); + if (mcbsp->pdata->buffer_size) sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group); diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h index 61e93b1c185d..d312e72f7979 100644 --- a/sound/soc/omap/mcbsp.h +++ b/sound/soc/omap/mcbsp.h @@ -323,8 +323,11 @@ struct omap_mcbsp { unsigned int fmt; unsigned int in_freq; + unsigned int latency; int clk_div; int wlen; + + struct pm_qos_request pm_qos_req; }; void omap_mcbsp_config(struct omap_mcbsp *mcbsp, diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index d018e966e533..ddaec37fb4c3 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -226,6 +226,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, int wlen, channels, wpf; int pkt_size = 0; unsigned int format, div, framesize, master; + unsigned int buffer_size = mcbsp->pdata->buffer_size; dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); channels = params_channels(params); @@ -240,7 +241,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, default: return -EINVAL; } - if (mcbsp->pdata->buffer_size) { + if (buffer_size) { + int latency; + if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { int period_words, max_thrsh; int divider = 0; @@ -271,6 +274,22 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, /* Use packet mode for non mono streams */ pkt_size = channels; } + + latency = ((((buffer_size - pkt_size) / channels) * 1000) + / (params->rate_num / params->rate_den)); + + /* + * Use the lowest QoS latency value for active streams, but + * this has the disadvantage of using lower than needed latency + * if an stream with lower QoS ends before one with a higher + * one. Latency setting only gets reset when all streams + * complete. + */ + if (latency <= mcbsp->latency) + mcbsp->latency = latency; + else + mcbsp->latency = 0; + omap_mcbsp_set_threshold(substream, pkt_size); } -- 2.7.4

2 2

[alsa-devel] [PATCH][alsa-lib] topology: fix unused-const-variable warning
by Takashi Sakamoto 02 Jan '17

02 Jan '17

Last year, unused static const variable was added, then compiler generates a below warning. dapm.c:43:30: warning: ‘widget_control_map’ defined but not used [-Wunused-const-variable=] static const struct map_elem widget_control_map[] = { ^~~~~~~~~~~~~~~~~~ This commit removes it. Fixes: 01a0e1a1c219 ("topology: Add DAPM object parser") Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- src/topology/dapm.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/src/topology/dapm.c b/src/topology/dapm.c index e830751..8c585a7 100644 --- a/src/topology/dapm.c +++ b/src/topology/dapm.c @@ -39,14 +39,6 @@ static const struct map_elem widget_map[] = { {"dai_link", SND_SOC_TPLG_DAPM_DAI_LINK}, }; -/* mapping of widget kcontrol text names to types */ -static const struct map_elem widget_control_map[] = { - {"volsw", SND_SOC_TPLG_DAPM_CTL_VOLSW}, - {"enum_double", SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE}, - {"enum_virt", SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT}, - {"enum_value", SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE}, -}; - static int lookup_widget(const char *w) { unsigned int i; -- 2.9.3

4 8