December 2016 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH V3 1/2] ASoC: samsung: include gpio consumer.h
by Fabian Frederick 09 Dec '16

09 Dec '16

Fix the following build errors on X86_32 !GPIOLIB sound/soc/samsung/tm2_wm5110.c:220:3: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration] sound/soc/samsung/tm2_wm5110.c:438:24: error: implicit declaration of function 'devm_gpiod_get' [-Werror=implicit-function-declaration] Reviewed-by: Krzysztof Kozlowski <krzk(a)kernel.org> Signed-off-by: Fabian Frederick <fabf(a)skynet.be> --- V3: -Add reviewed-by V2: -Add configuration settings (suggested by Krzysztof Kozlowski) sound/soc/samsung/tm2_wm5110.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/samsung/tm2_wm5110.c b/sound/soc/samsung/tm2_wm5110.c index 5cdf7d1..24cc9d6 100644 --- a/sound/soc/samsung/tm2_wm5110.c +++ b/sound/soc/samsung/tm2_wm5110.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/of.h> #include <sound/pcm_params.h> -- 2.7.4

1 0

[alsa-devel] [PATCH v5 0/2] Add platform clock for BayTrail platforms
by Irina Tirdea 09 Dec '16

09 Dec '16

These patches specifically enable the audio MCLK required by Baytrail CR devices. It is the remaining part of a bigger set of patches (already merged in Mark's tree) that enable sound for Baytrail CR devices (especially Asus T100TAF) [1]. They include the clock driver and a move of the non-architectural pmc_atom driver code into drivers/platform/x86. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-August/111704.html Changes from v4: - move the pmc_atom driver from arch/x86/platform/atom to drivers/platform/x86 Changes from v3: - replace devm_kzalloc with devm_kcalloc - add x86 architecture maintainers Changes from v2: - move clk platform data structures to a separate include file - store clk_hw pointer for the fixed rate clocks Changes from v1: - register the clk device as child of pmc device - pass iomem pointer from pmc driver to clk driver to avoid using pmc_atom_read()/write() and use readl/writel API instead - use devm_clk_hw_register/clkdev_hw_create instead of clk_register/clkdev_create Irina Tirdea (2): arch/x86/platform/atom: Move pmc_atom to drivers/platform/x86 clk: x86: Add Atom PMC platform clocks arch/x86/Kconfig | 4 - arch/x86/platform/atom/Makefile | 1 - drivers/acpi/acpi_lpss.c | 2 +- drivers/clk/x86/Makefile | 1 + drivers/clk/x86/clk-byt-plt.c | 380 +++++++++++++++++++++ drivers/platform/x86/Kconfig | 6 + drivers/platform/x86/Makefile | 1 + .../atom => drivers/platform/x86}/pmc_atom.c | 81 ++++- include/linux/platform_data/x86/clk-byt-plt.h | 31 ++ .../linux/platform_data/x86}/pmc_atom.h | 3 + 10 files changed, 499 insertions(+), 11 deletions(-) create mode 100644 drivers/clk/x86/clk-byt-plt.c rename {arch/x86/platform/atom => drivers/platform/x86}/pmc_atom.c (88%) create mode 100644 include/linux/platform_data/x86/clk-byt-plt.h rename {arch/x86/include/asm => include/linux/platform_data/x86}/pmc_atom.h (98%) -- 1.9.1

4 5

[alsa-devel] [alsa-utils][PATCH 0/5] Add man page for alsaucm + other fixes
by Antonio Ospite 09 Dec '16

09 Dec '16

Hi, while adding the alsaucm man page (patch 4/5) I noticed some other things worth fixing, so here is the whole patch set. In patch 4/5 the reStructuredText content is exactly the same reviewed by Liam, so I put his ACK in the commit message. Thanks, Antonio Antonio Ospite (5): alsaucm: mention the "list1" command in the usage output configure.ac: fix the check for xmlto availability configure.ac: add a check for rst2man, a reStructuredText man page generator alsaucm: add a man page, generated from reStructuredText INSTALL: document how to configure a build for installation in a local dir .gitignore | 1 + INSTALL | 7 ++ alsaucm/Makefile.am | 7 ++ alsaucm/alsaucm.rst | 235 ++++++++++++++++++++++++++++++++++++++++++++++++++++ alsaucm/usecase.c | 3 +- configure.ac | 15 +++- 6 files changed, 264 insertions(+), 4 deletions(-) create mode 100644 alsaucm/alsaucm.rst -- Antonio Ospite https://ao2.it https://twitter.com/ao2it A: Because it messes up the order in which people normally read text. See http://en.wikipedia.org/wiki/Posting_style Q: Why is top-posting such a bad thing?

2 7

[alsa-devel] [PATCH v6 0/3] Media Device Allocator API
by Shuah Khan 09 Dec '16

09 Dec '16

Media Device Allocator API to allows multiple drivers share a media device. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Patches 0001 and 0002 are rebased to 4.9-rc7. Patch 0003 for snd-usb-audio is a rebase of the patch that was tested with the original Media Device Allocator patch series. snd-usb-audio patch includes the fixes found during 4.7-rc1 time in the original snd-usb-audio patch. Changes to patches in this series: Changes to patch 0001 since v5: (comments from Mauro and Sakari) - Removed struct device from media_device_instance. mdev.dev is used instead. - Added documentation. Changes to patch 0002: - No changes since patch v2, applies cleanly on top of the following: media: Protect enable_source and disable_source handler code paths https://lkml.org/lkml/2016/11/29/1001 Changes to patch 0003: - Changed to hold graph_mutex to check and call enable_source and disable_source handlers - to match au0828 doing the same in: media: Protect enable_source and disable_source handler code paths https://lkml.org/lkml/2016/11/29/1001 Changes to patch 0001 since v4: - Addressed Sakari's review comments with the exception of opting to not introduce media_device_usb_allocate() macro, and to not add a new routine to find media device instance to avoid a one line check. Changes to patch 0001 since v3: - Fixed undefined reference to `__media_device_usb_init compile error when CONFIG_USB is disabled. - Fixed kernel paging error when accessing /dev/mediaX after rmmod of the module that owns the media_device. The fix bumps the reference count for the owner when second driver comes along to share the media_device. If au0828 owns the media_device, then snd_usb_audio will bump the refcount for au0828, so it won't get deleted and vice versa. Changes to patch 0002 since v2: - Updated media_device_delete() to pass in module name. Changes to patch 0003 since the last version in 4.7-rc1: - Included fixes to bugs found during testing. - Updated to use the Media Allocator API. This patch series has been tested with au0828 and snd-usb-audio drivers. Ran bind and unbind loop tests on each driver with mc_nextgen_test and media_device_test app loop tests while checking lsmod and dmesg. Please refer to tools/testing/selftests/media_tests/regression_test.txt for testing done on this series. Shuah Khan (3): media: Media Device Allocator API media: change au0828 to use Media Device Allocator API sound/usb: Use Media Controller API to share media resources Documentation/media/kapi/mc-core.rst | 37 ++++ drivers/media/Makefile | 3 +- drivers/media/media-dev-allocator.c | 133 ++++++++++++++ drivers/media/usb/au0828/au0828-core.c | 12 +- drivers/media/usb/au0828/au0828.h | 1 + include/media/media-dev-allocator.h | 54 ++++++ sound/usb/Kconfig | 4 + sound/usb/Makefile | 2 + sound/usb/card.c | 14 ++ sound/usb/card.h | 3 + sound/usb/media.c | 326 +++++++++++++++++++++++++++++++++ sound/usb/media.h | 73 ++++++++ sound/usb/mixer.h | 3 + sound/usb/pcm.c | 28 ++- sound/usb/quirks-table.h | 1 + sound/usb/stream.c | 2 + sound/usb/usbaudio.h | 6 + 17 files changed, 688 insertions(+), 14 deletions(-) create mode 100644 drivers/media/media-dev-allocator.c create mode 100644 include/media/media-dev-allocator.h create mode 100644 sound/usb/media.c create mode 100644 sound/usb/media.h -- 2.7.4

4 18

[alsa-devel] [PATCH] alsactl: Fix potential NULL dereferences in daemon mode
by Takashi Iwai 09 Dec '16

09 Dec '16

The code releasing the each card object may access to NULL when a bogus count is given. Add a NULL check just to make sure. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- Something I forgot to merge, casually found in the working directory... alsactl/daemon.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/alsactl/daemon.c b/alsactl/daemon.c index 127701efaf0f..4f0a935a3987 100644 --- a/alsactl/daemon.c +++ b/alsactl/daemon.c @@ -451,8 +451,10 @@ save: out: free(pfd); remove(pidfile); - for (i = 0; i < count; i++) - card_free(&cards[i]); - free(cards); + if (cards) { + for (i = 0; i < count; i++) + card_free(&cards[i]); + free(cards); + } return 0; } -- 2.11.0

1 0

[alsa-devel] [PATCH 4/4] hda: thinkpad_helper: Add support for hid-lenovo LED control
by Dennis Wassenberg 09 Dec '16

09 Dec '16

Make the thinkpad_helper able to support not only led control over acpi with thinkpad_acpi driver but also led control over hid-lenovo. The hid-lenovo driver adapted the led control api of thinkpad_acpi. Make the thinkpad_acpi and hid-lenovo able to work combined to support connected Lenovo USB keyboards at Lenovo Thinkpad devices. Signed-off-by: Dennis Wassenberg <dennis.wassenberg(a)secunet.com> --- sound/pci/hda/thinkpad_helper.c | 182 +++++++++++++++++++++++++++++++--------- 1 file changed, 144 insertions(+), 38 deletions(-) diff --git a/sound/pci/hda/thinkpad_helper.c b/sound/pci/hda/thinkpad_helper.c index f0955fd..0d98624 100644 --- a/sound/pci/hda/thinkpad_helper.c +++ b/sound/pci/hda/thinkpad_helper.c @@ -1,83 +1,188 @@ /* Helper functions for Thinkpad LED control; * to be included from codec driver + * + * These helper functions include both LED control over thinkpad_acpi and + * hid-lenovo */ -#if IS_ENABLED(CONFIG_THINKPAD_ACPI) +#if IS_ENABLED(CONFIG_THINKPAD_ACPI) || IS_ENABLED(CONFIG_HID_LENOVO) #include <linux/acpi.h> +#include <linux/hid-lenovo.h> #include <linux/thinkpad_acpi.h> -static int (*led_set_func)(int, bool); +static int (*led_set_func_tpacpi)(int, bool); +static int (*led_set_func_hid_lenovo)(int, bool); static void (*old_vmaster_hook)(void *, int); static bool is_thinkpad(struct hda_codec *codec) { + return (codec->core.subsystem_id >> 16 == 0x17aa); +} + +static bool is_thinkpad_acpi(struct hda_codec *codec) +{ return is_thinkpad(codec) && (acpi_dev_found("LEN0068") || acpi_dev_found("IBM0068")); } -static void update_tpacpi_mute_led(void *private_data, int enabled) +static void update_thinkpad_mute_led(void *private_data, int enabled) { if (old_vmaster_hook) old_vmaster_hook(private_data, enabled); - if (led_set_func) - led_set_func(TPACPI_LED_MUTE, !enabled); +#if IS_ENABLED(CONFIG_THINKPAD_ACPI) + if (led_set_func_tpacpi) + led_set_func_tpacpi(TPACPI_LED_MUTE, !enabled); +#endif +#if IS_ENABLED(CONFIG_HID_LENOVO) + if (led_set_func_hid_lenovo) + led_set_func_hid_lenovo(HID_LENOVO_LED_MUTE, !enabled); +#endif } -static void update_tpacpi_micmute_led(struct hda_codec *codec, + + +static void update_thinkpad_micmute_led(struct hda_codec *codec, struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { - if (!ucontrol || !led_set_func) + if (!ucontrol) return; if (strcmp("Capture Switch", ucontrol->id.name) == 0 && ucontrol->id.index == 0) { /* TODO: How do I verify if it's a mono or stereo here? */ bool val = ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]; - led_set_func(TPACPI_LED_MICMUTE, !val); +#if IS_ENABLED(CONFIG_THINKPAD_ACPI) + if (led_set_func_tpacpi) + led_set_func_tpacpi(TPACPI_LED_MICMUTE, !val); +#endif +#if IS_ENABLED(CONFIG_HID_LENOVO) + if (led_set_func_hid_lenovo) + led_set_func_hid_lenovo(HID_LENOVO_LED_MICMUTE, !val); +#endif } } -static void hda_fixup_thinkpad_acpi(struct hda_codec *codec, - const struct hda_fixup *fix, int action) +#if IS_ENABLED(CONFIG_THINKPAD_ACPI) +static int hda_fixup_thinkpad_acpi_prepare(struct hda_codec *codec) { struct hda_gen_spec *spec = codec->spec; - bool removefunc = false; + int ret = -ENXIO; - if (action == HDA_FIXUP_ACT_PROBE) { - if (!is_thinkpad(codec)) - return; - if (!led_set_func) - led_set_func = symbol_request(tpacpi_led_set); - if (!led_set_func) { - codec_warn(codec, - "Failed to find thinkpad-acpi symbol tpacpi_led_set\n"); - return; - } + if (!is_thinkpad(codec)) + return -ENODEV; + if (!is_thinkpad_acpi(codec)) + return -ENODEV; + if (!led_set_func_tpacpi) + led_set_func_tpacpi = symbol_request(tpacpi_led_set); + if (!led_set_func_tpacpi) { + codec_warn(codec, + "Failed to find thinkpad-acpi symbol tpacpi_led_set\n"); + return -ENOENT; + } - removefunc = true; - if (led_set_func(TPACPI_LED_MUTE, false) >= 0) { - old_vmaster_hook = spec->vmaster_mute.hook; - spec->vmaster_mute.hook = update_tpacpi_mute_led; - removefunc = false; - } - if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0) { - if (spec->num_adc_nids > 1) - codec_dbg(codec, - "Skipping micmute LED control due to several ADCs"); - else { - spec->cap_sync_hook = update_tpacpi_micmute_led; - removefunc = false; - } + if (led_set_func_tpacpi(TPACPI_LED_MUTE, false) >= 0) { + old_vmaster_hook = spec->vmaster_mute.hook; + spec->vmaster_mute.hook = update_thinkpad_mute_led; + ret = 0; + } + + if (led_set_func_tpacpi(TPACPI_LED_MICMUTE, false) >= 0) { + if (spec->num_adc_nids > 1) + codec_dbg(codec, + "Skipping micmute LED control due to several ADCs"); + else { + spec->cap_sync_hook = update_thinkpad_micmute_led; + ret = 0; } } - if (led_set_func && (action == HDA_FIXUP_ACT_FREE || removefunc)) { + return ret; +} + +static void hda_fixup_thinkpad_acpi_setup(struct hda_codec *codec, int action) +{ + int ret = 0; + + if (action == HDA_FIXUP_ACT_PROBE) { + ret = hda_fixup_thinkpad_acpi_prepare(codec); + } + + if (led_set_func_tpacpi && + (action == HDA_FIXUP_ACT_FREE || ret)) { + symbol_put(tpacpi_led_set); - led_set_func = NULL; + led_set_func_tpacpi = NULL; + old_vmaster_hook = NULL; + } +} +#else +static void hda_fixup_thinkpad_acpi_setup(struct hda_codec *codec, int action) +{ + return 0; +} +#endif + +#if IS_ENABLED(CONFIG_HID_LENOVO) +static int hda_fixup_thinkpad_hid_prepare(struct hda_codec *codec) +{ + struct hda_gen_spec *spec = codec->spec; + int ret = 0; + + if (!is_thinkpad(codec)) + return -ENODEV; + if (!led_set_func_hid_lenovo) + led_set_func_hid_lenovo = symbol_request(hid_lenovo_led_set); + if (!led_set_func_hid_lenovo) { + codec_warn(codec, + "Failed to find hid-lenovo symbol hid_lenovo_led_set\n"); + return -ENOENT; + } + + if (update_thinkpad_mute_led != spec->vmaster_mute.hook) + old_vmaster_hook = spec->vmaster_mute.hook; + + /* do not remove hook if setting delay does not work currently because + * it is a usb hid devices which is not connected right now + * maybe is will be connected later + */ + led_set_func_hid_lenovo(HID_LENOVO_LED_MUTE, false); + spec->vmaster_mute.hook = update_thinkpad_mute_led; + + led_set_func_hid_lenovo(HID_LENOVO_LED_MICMUTE, false); + spec->cap_sync_hook = update_thinkpad_micmute_led; + + return ret; +} + +static void hda_fixup_thinkpad_hid_setup(struct hda_codec *codec, int action) +{ + int ret = 0; + + if (action == HDA_FIXUP_ACT_PROBE) { + ret = hda_fixup_thinkpad_hid_prepare(codec); + } + + if (led_set_func_hid_lenovo && + (action == HDA_FIXUP_ACT_FREE || ret)) { + + symbol_put(hid_lenovo_led_set); + led_set_func_hid_lenovo = NULL; old_vmaster_hook = NULL; } } +#else +static void hda_fixup_thinkpad_hid_setup(struct hda_codec *codec, int action) +{ +} +#endif + +/** this fixup is not for acpi case only, it will handle hid-lenovo as well */ +static void hda_fixup_thinkpad_acpi(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + hda_fixup_thinkpad_acpi_setup(codec, action); + hda_fixup_thinkpad_hid_setup(codec, action); +} #else /* CONFIG_THINKPAD_ACPI */ @@ -87,3 +192,4 @@ static void hda_fixup_thinkpad_acpi(struct hda_codec *codec, } #endif /* CONFIG_THINKPAD_ACPI */ + -- 1.9.1 --

1 0

[alsa-devel] [PATCH 3/4] hid-lenovo: Handle X1 Tablet cover FNLock function appropriately
by Dennis Wassenberg 09 Dec '16

09 Dec '16

The FNLock state is not handled by the X1 tablet cover itself. There is the need to set the FNLock LED which actually enables the FNLock state of the cover. This means activating the FNLock LED will enable FNLock state and FNLock LED. --- drivers/hid/hid-lenovo.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 2efd5b0..3ace8c3 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -526,6 +526,29 @@ static void lenovo_led_brightness_set_tpx1cover(struct led_classdev *led_cdev, } } +static int lenovo_event_tpx1cover(struct hid_device *hdev, + struct hid_field *field, struct hid_usage *usage, __s32 value) +{ + int ret = 0; + + if (usage->hid == HID_CP_CONSUMERCONTROL) { + if (usage->usage_index == 8 && value == 1) { + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + + if (drv_data && drv_data->led_present) { + drv_data->fnlock_state = lenovo_led_brightness_get_tpx1cover( + &drv_data->led_fnlock) == LED_OFF ? 1 : 0; + lenovo_led_brightness_set_tpx1cover( + &drv_data->led_fnlock, + drv_data->fnlock_state ? LED_FULL : LED_OFF); + } + } + + } + + return ret; +} + static int lenovo_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { @@ -533,6 +556,8 @@ static int lenovo_event(struct hid_device *hdev, struct hid_field *field, case USB_DEVICE_ID_LENOVO_CUSBKBD: case USB_DEVICE_ID_LENOVO_CBTKBD: return lenovo_event_cptkbd(hdev, field, usage, value); + case USB_DEVICE_ID_LENOVO_X1_COVER: + return lenovo_event_tpx1cover(hdev, field, usage, value); default: return 0; } -- 1.9.1

1 0

[alsa-devel] [PATCH 2/4] hid-lenovo: Add support for X1 Tablet cover LED control
by Dennis Wassenberg 09 Dec '16

09 Dec '16

Add support for controlling MUTE, MICMUTE and FNLOCK LEDs. In ordner to enable MUTE and MICMUTE LED control over thinkpad_helper the external interface hid_lenovo_led_set is introduced. This enables setting Lenovo LEDs from external. This is needed because the X1 Tablet Cover is the first thinkpad_helper controlable device which is connected via USB. Additionally the led state is stored inside the hid-lenovo driver to make the driver able to set the led appropriate after device attach. --- drivers/hid/hid-lenovo.c | 262 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/hid-lenovo.h | 15 +++ 2 files changed, 277 insertions(+) create mode 100644 include/linux/hid-lenovo.h diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 4fc332c..2efd5b0 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -21,11 +21,27 @@ #include <linux/sysfs.h> #include <linux/device.h> #include <linux/hid.h> +#include <linux/hid-lenovo.h> #include <linux/input.h> #include <linux/leds.h> #include "hid-ids.h" +struct lenovo_led_list_entry { + struct led_classdev *dev; + enum hid_lenovo_led_type type; + struct list_head list; +}; + +struct lenovo_led_type_entry { + struct led_classdev *dev; + enum hid_lenovo_led_type type; + struct list_head list; +}; + +static struct list_head hid_lenovo_leds = LIST_HEAD_INIT(hid_lenovo_leds); +static enum led_brightness hid_lenovo_initial_leds[HID_LENOVO_LED_MAX]; + struct lenovo_drvdata_tpkbd { int led_state; struct led_classdev led_mute; @@ -44,6 +60,44 @@ struct lenovo_drvdata_cptkbd { int sensitivity; }; +struct lenovo_drvdata_tpx1cover { + uint16_t led_state; + uint8_t fnlock_state; + uint8_t led_present; + struct led_classdev led_mute; + struct led_classdev led_micmute; + struct led_classdev led_fnlock; +}; + +int hid_lenovo_led_set(enum hid_lenovo_led_type led, bool on) +{ + struct led_classdev *dev = NULL; + struct lenovo_led_list_entry *entry; + + if (led >= HID_LENOVO_LED_MAX) + return -EINVAL; + + hid_lenovo_initial_leds[led] = on ? LED_FULL : LED_OFF; + + list_for_each_entry(entry, &hid_lenovo_leds, list) { + if (entry->type == led) { + dev = entry->dev; + break; + } + } + + if (!dev) + return -ENODEV; + + if (!dev->brightness_set) + return -ENODEV; + + dev->brightness_set(dev, on ? LED_FULL : LED_OFF); + + return 0; +} +EXPORT_SYMBOL_GPL(hid_lenovo_led_set); + #define map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c)) static const __u8 lenovo_pro_dock_need_fixup_collection[] = { @@ -416,6 +470,62 @@ static int lenovo_event_cptkbd(struct hid_device *hdev, return 0; } +static enum led_brightness lenovo_led_brightness_get_tpx1cover( + struct led_classdev *led_cdev) +{ + struct device *dev = led_cdev->dev->parent; + struct hid_device *hdev = to_hid_device(dev); + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + enum hid_lenovo_led_type led; + + if (led_cdev == &drv_data->led_mute) + led = HID_LENOVO_LED_MUTE; + else if (led_cdev == &drv_data->led_micmute) + led = HID_LENOVO_LED_MICMUTE; + else if (led_cdev == &drv_data->led_fnlock) + led = HID_LENOVO_LED_FNLOCK; + else + return LED_OFF; + + return drv_data->led_state & (1 << led) + ? LED_FULL + : LED_OFF; +} + +static void lenovo_led_brightness_set_tpx1cover(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct device *dev = led_cdev->dev->parent; + struct hid_device *hdev = to_hid_device(dev); + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + struct hid_report *report; + enum hid_lenovo_led_type led; + + if (led_cdev == &drv_data->led_mute) { + led = HID_LENOVO_LED_MUTE; + } else if (led_cdev == &drv_data->led_micmute) { + led = HID_LENOVO_LED_MICMUTE; + } else if (led_cdev == &drv_data->led_fnlock) { + led = HID_LENOVO_LED_FNLOCK; + } else { + hid_warn(hdev, "Invalid LED to set.\n"); + return; + } + + if (value == LED_OFF) + drv_data->led_state &= ~(1 << led); + else + drv_data->led_state |= 1 << led; + + report = hdev->report_enum[HID_OUTPUT_REPORT].report_id_hash[9]; + if (report) { + report->field[0]->value[0] = ((led + 1) << 4) | 0x44; + report->field[0]->value[1] = (drv_data->led_state & (1 << led)) + ? 0x02 : 0x01; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + } +} + static int lenovo_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { @@ -788,6 +898,7 @@ static int lenovo_probe_tpkbd(struct hid_device *hdev) static int lenovo_probe_tpx1cover_configure(struct hid_device *hdev) { struct hid_report *report = hdev->report_enum[HID_OUTPUT_REPORT].report_id_hash[9]; + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); if (!report) return -ENOENT; @@ -807,14 +918,33 @@ static int lenovo_probe_tpx1cover_configure(struct hid_device *hdev) hid_hw_request(hdev, report, HID_REQ_SET_REPORT); hid_hw_wait(hdev); + lenovo_led_brightness_set_tpx1cover(&drv_data->led_mute, + hid_lenovo_initial_leds[HID_LENOVO_LED_MUTE]); + + hid_hw_wait(hdev); + + lenovo_led_brightness_set_tpx1cover(&drv_data->led_micmute, + hid_lenovo_initial_leds[HID_LENOVO_LED_MICMUTE]); + hid_hw_wait(hdev); + + lenovo_led_brightness_set_tpx1cover(&drv_data->led_fnlock, LED_FULL); + return 0; } static int lenovo_probe_tpx1cover_special_functions(struct hid_device *hdev) { + struct device *dev = &hdev->dev; + struct lenovo_drvdata_tpx1cover *drv_data = NULL; + struct lenovo_led_list_entry *mute_entry = NULL; + struct lenovo_led_list_entry *micmute_entry = NULL; + struct lenovo_led_list_entry *fnlock_entry = NULL; + struct hid_report *report; bool report_match = 1; + int ret = 0; + /* Used for LED control */ report = hid_validate_values(hdev, HID_INPUT_REPORT, 3, 0, 16); report_match &= report ? 1 : 0; @@ -825,7 +955,97 @@ static int lenovo_probe_tpx1cover_special_functions(struct hid_device *hdev) if (!report_match) return -ENODEV; + drv_data = devm_kzalloc(&hdev->dev, + sizeof(struct lenovo_drvdata_tpx1cover), + GFP_KERNEL); + + if (!drv_data) { + hid_err(hdev, + "Could not allocate memory for tpx1cover driver data\n"); + return -ENOMEM; + } + + mute_entry = kzalloc(sizeof(*mute_entry), GFP_KERNEL); + if (!mute_entry) { + hid_err(hdev, "Could not allocate memory for led mute entry\n"); + ret = -ENOMEM; + goto err_cleanup; + } + drv_data->led_mute.name = "MUTE_LED"; + drv_data->led_mute.brightness_get = lenovo_led_brightness_get_tpx1cover; + drv_data->led_mute.brightness_set = lenovo_led_brightness_set_tpx1cover; + devm_led_classdev_register(dev, &drv_data->led_mute); + + INIT_LIST_HEAD(&mute_entry->list); + mute_entry->dev = &drv_data->led_mute; + mute_entry->type = HID_LENOVO_LED_MUTE; + list_add_tail(&mute_entry->list, &hid_lenovo_leds); + + + micmute_entry = kzalloc(sizeof(*micmute_entry), GFP_KERNEL); + if (!micmute_entry) { + hid_err(hdev, "Could not allocate memory for led micmute entry\n"); + ret = -ENOMEM; + goto err_cleanup; + } + + drv_data->led_micmute.name = "MICMUTE_LED"; + drv_data->led_micmute.brightness_get = lenovo_led_brightness_get_tpx1cover; + drv_data->led_micmute.brightness_set = lenovo_led_brightness_set_tpx1cover; + devm_led_classdev_register(dev, &drv_data->led_micmute); + + INIT_LIST_HEAD(&micmute_entry->list); + micmute_entry->dev = &drv_data->led_micmute; + micmute_entry->type = HID_LENOVO_LED_MICMUTE; + list_add_tail(&micmute_entry->list, &hid_lenovo_leds); + + + fnlock_entry = kzalloc(sizeof(*fnlock_entry), GFP_KERNEL); + if (!fnlock_entry) { + hid_err(hdev, "Could not allocate memory for led fnlock entry\n"); + ret = -ENOMEM; + goto err_cleanup; + } + + drv_data->led_fnlock.brightness_get = lenovo_led_brightness_get_tpx1cover; + drv_data->led_fnlock.brightness_set = lenovo_led_brightness_set_tpx1cover; + drv_data->led_fnlock.name = "FNLOCK_LED"; + devm_led_classdev_register(dev, &drv_data->led_fnlock); + + INIT_LIST_HEAD(&fnlock_entry->list); + fnlock_entry->dev = &drv_data->led_fnlock; + fnlock_entry->type = HID_LENOVO_LED_FNLOCK; + list_add_tail(&fnlock_entry->list, &hid_lenovo_leds); + + + drv_data->led_state = 0; + drv_data->fnlock_state = 1; + drv_data->led_present = 1; + + hid_set_drvdata(hdev, drv_data); + return lenovo_probe_tpx1cover_configure(hdev); + +err_cleanup: + if (mute_entry) { + list_del(&mute_entry->list); + kfree (mute_entry); + } + + if (micmute_entry) { + list_del(&micmute_entry->list); + kfree (micmute_entry); + } + + if (fnlock_entry) { + list_del(&fnlock_entry->list); + kfree (fnlock_entry); + } + + if (drv_data) + kfree(drv_data); + + return ret; } static int lenovo_probe_tpx1cover_touch(struct hid_device *hdev) @@ -846,6 +1066,7 @@ static int lenovo_probe_tpx1cover_touch(struct hid_device *hdev) static int lenovo_probe_tpx1cover_keyboard(struct hid_device *hdev) { + struct lenovo_drvdata_tpx1cover *drv_data; struct hid_report *report; bool report_match = 1; int ret = 0; @@ -860,6 +1081,21 @@ static int lenovo_probe_tpx1cover_keyboard(struct hid_device *hdev) if (!report_match) ret = -ENODEV; + drv_data = devm_kzalloc(&hdev->dev, + sizeof(struct lenovo_drvdata_tpx1cover), + GFP_KERNEL); + + if (!drv_data) { + hid_err(hdev, + "Could not allocate memory for tpx1cover driver data\n"); + return -ENOMEM; + } + + drv_data->led_state = 0; + drv_data->led_present = 0; + drv_data->fnlock_state = 0; + hid_set_drvdata(hdev, drv_data); + return ret; } @@ -1001,6 +1237,29 @@ static void lenovo_remove_cptkbd(struct hid_device *hdev) &lenovo_attr_group_cptkbd); } +static void lenovo_remove_tpx1cover(struct hid_device *hdev) +{ + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + struct lenovo_led_list_entry *entry, *head; + + if (!drv_data) + return; + + if (drv_data->led_present) { + list_for_each_entry_safe(entry, head, &hid_lenovo_leds, list) { + if (entry->dev == &drv_data->led_fnlock + || entry->dev == &drv_data->led_micmute + || entry->dev == &drv_data->led_mute) { + + list_del(&entry->list); + kfree(entry); + } + } + } + + hid_set_drvdata(hdev, NULL); +} + static void lenovo_remove(struct hid_device *hdev) { switch (hdev->product) { @@ -1011,6 +1270,9 @@ static void lenovo_remove(struct hid_device *hdev) case USB_DEVICE_ID_LENOVO_CBTKBD: lenovo_remove_cptkbd(hdev); break; + case USB_DEVICE_ID_LENOVO_X1_COVER: + lenovo_remove_tpx1cover(hdev); + break; } hid_hw_stop(hdev); diff --git a/include/linux/hid-lenovo.h b/include/linux/hid-lenovo.h new file mode 100644 index 0000000..00eb140 --- /dev/null +++ b/include/linux/hid-lenovo.h @@ -0,0 +1,15 @@ + +#ifndef __HID_LENOVO_H__ +#define __HID_LENOVO_H__ + + +enum hid_lenovo_led_type { + HID_LENOVO_LED_FNLOCK = 0, + HID_LENOVO_LED_MUTE, + HID_LENOVO_LED_MICMUTE, + HID_LENOVO_LED_MAX +}; + +int hid_lenovo_led_set(enum hid_lenovo_led_type led, bool on); + +#endif /* __HID_LENOVO_H_ */ -- 1.9.1

1 0

[alsa-devel] [PATCH 1/4] hid-lenovo: Add support for X1 Tablet cover special keys
by Dennis Wassenberg 09 Dec '16

09 Dec '16

The Lenovo X1 Tablet Cover is connected via USB. It constists of 1 usb device with 3 usb interfaces. Interface 0 represents keyboard, interface 1 the function / special keys and LED control, interface 2 is the Synaptics touchpad and pointing stick. This patch will introduce the function / special keys handling of USB interface 1. --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + drivers/hid/hid-lenovo.c | 160 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 162 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index cff060b..5b38afc 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1932,6 +1932,7 @@ void hid_disconnect(struct hid_device *hdev) { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CUSBKBD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CBTKBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPPRODOCK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, #endif { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index ec277b9..961ee4f 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -623,6 +623,7 @@ #define USB_DEVICE_ID_LENOVO_CUSBKBD 0x6047 #define USB_DEVICE_ID_LENOVO_CBTKBD 0x6048 #define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067 +#define USB_DEVICE_ID_LENOVO_X1_COVER 0x6085 #define USB_VENDOR_ID_LG 0x1fd2 #define USB_DEVICE_ID_LG_MULTITOUCH 0x0064 diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 1ac4ff4..4fc332c 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -3,9 +3,11 @@ * - ThinkPad USB Keyboard with TrackPoint (tpkbd) * - ThinkPad Compact Bluetooth Keyboard with TrackPoint (cptkbd) * - ThinkPad Compact USB Keyboard with TrackPoint (cptkbd) + * - ThinkPad X1 Cover USB Keyboard with TrackPoint and Touchpad (tpx1cover) * * Copyright (c) 2012 Bernhard Seibold * Copyright (c) 2014 Jamie Lentin <jm(a)lentin.co.uk> + * Copyright (c) 2016 Dennis Wassenberg <dennis.wassenberg(a)secunet.com> */ /* @@ -86,6 +88,55 @@ static int lenovo_input_mapping_tpkbd(struct hid_device *hdev, return 0; } +static int lenovo_input_mapping_tpx1cover(struct hid_device *hdev, + struct hid_input *hi, struct hid_field *field, + struct hid_usage *usage, unsigned long **bit, int *max) +{ + if (usage->hid == HID_CP_CONSUMERCONTROL) { + /* Unknown keys -> Idenditied by usage index! */ + switch (usage->usage_index) { + case 8: + // FNLock key + return -1; + + case 9: + input_set_capability(hi->input, EV_KEY, KEY_MICMUTE); + map_key_clear(KEY_MICMUTE); + return 1; + + case 10: + input_set_capability(hi->input, EV_KEY, KEY_CONFIG); + map_key_clear(KEY_CONFIG); + return 1; + + case 11: + input_set_capability(hi->input, EV_KEY, KEY_SEARCH); + map_key_clear(KEY_SEARCH); + return 1; + + case 12: + input_set_capability(hi->input, EV_KEY, KEY_SETUP); + map_key_clear(KEY_SETUP); + return 1; + + case 13: + input_set_capability(hi->input, EV_KEY, KEY_SWITCHVIDEOMODE); + map_key_clear(KEY_SWITCHVIDEOMODE); + return 1; + + case 14: + input_set_capability(hi->input, EV_KEY, KEY_RFKILL); + map_key_clear(KEY_RFKILL); + return 1; + + } + + return -1; + } + + return 0; +} + static int lenovo_input_mapping_cptkbd(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) @@ -172,6 +223,9 @@ static int lenovo_input_mapping(struct hid_device *hdev, case USB_DEVICE_ID_LENOVO_CBTKBD: return lenovo_input_mapping_cptkbd(hdev, hi, field, usage, bit, max); + case USB_DEVICE_ID_LENOVO_X1_COVER: + return lenovo_input_mapping_tpx1cover(hdev, hi, field, + usage, bit, max); default: return 0; } @@ -731,6 +785,107 @@ static int lenovo_probe_tpkbd(struct hid_device *hdev) return ret; } +static int lenovo_probe_tpx1cover_configure(struct hid_device *hdev) +{ + struct hid_report *report = hdev->report_enum[HID_OUTPUT_REPORT].report_id_hash[9]; + + if (!report) + return -ENOENT; + + report->field[0]->value[0] = 0x54; + report->field[0]->value[1] = 0x20; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + hid_hw_wait(hdev); + + report->field[0]->value[0] = 0x54; + report->field[0]->value[1] = 0x08; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + hid_hw_wait(hdev); + + report->field[0]->value[0] = 0xA0; + report->field[0]->value[1] = 0x02; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + hid_hw_wait(hdev); + + return 0; +} + +static int lenovo_probe_tpx1cover_special_functions(struct hid_device *hdev) +{ + struct hid_report *report; + bool report_match = 1; + + /* Used for LED control */ + report = hid_validate_values(hdev, HID_INPUT_REPORT, 3, 0, 16); + report_match &= report ? 1 : 0; + /* Identify USB Intf 1 which is the only one with HID_FEATURE_REPORT 100 */ + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 100, 0, 1); + report_match &= report ? 1 : 0; + + if (!report_match) + return -ENODEV; + + return lenovo_probe_tpx1cover_configure(hdev); +} + +static int lenovo_probe_tpx1cover_touch(struct hid_device *hdev) +{ + struct hid_report *report; + bool report_match = 1; + int ret = 0; + + /* Identify USB Intf 2 which is the only one with HID_FEATURE_REPORT 15 */ + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 15, 0, 3); + report_match &= report ? 1 : 0; + + if (!report_match) + ret = -ENODEV; + + return ret; +} + +static int lenovo_probe_tpx1cover_keyboard(struct hid_device *hdev) +{ + struct hid_report *report; + bool report_match = 1; + int ret = 0; + + /* Identify USB Intf0 which is the only one with HID_INPUT_REPORT 0 + * and HID_OUTPUT_REPORT 0 */ + report = hid_validate_values(hdev, HID_INPUT_REPORT, 0, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 1); + report_match &= report ? 1 : 0; + + if (!report_match) + ret = -ENODEV; + + return ret; +} + +static int lenovo_probe_tpx1cover(struct hid_device *hdev) +{ + int ret = 0; + + /* + * Probing for special function keys and LED control -> usb intf 1 + * Probing for touch input -> usb intf 2 (handled by rmi4 driver) + * Other (keyboard) -> usb intf 0 + */ + if (!lenovo_probe_tpx1cover_special_functions(hdev)) { + /* special function keys and LED control */ + ret = 0; + } else if (!lenovo_probe_tpx1cover_touch(hdev)) { + /* handled by rmi */ + ret = -ENODEV; + } else { + /* keyboard */ + ret = lenovo_probe_tpx1cover_keyboard(hdev); + } + + return ret; +} + static int lenovo_probe_cptkbd(struct hid_device *hdev) { int ret; @@ -803,6 +958,9 @@ static int lenovo_probe(struct hid_device *hdev, case USB_DEVICE_ID_LENOVO_CBTKBD: ret = lenovo_probe_cptkbd(hdev); break; + case USB_DEVICE_ID_LENOVO_X1_COVER: + ret = lenovo_probe_tpx1cover(hdev); + break; default: ret = 0; break; @@ -883,6 +1041,7 @@ static int lenovo_input_configured(struct hid_device *hdev, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CUSBKBD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CBTKBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPPRODOCK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, { } }; @@ -902,3 +1061,4 @@ static int lenovo_input_configured(struct hid_device *hdev, module_hid_driver(lenovo_driver); MODULE_LICENSE("GPL"); + -- 1.9.1

1 0

Re: [alsa-devel] Cherry trail and Nau 88l24 codec
by Joseph Wang 09 Dec '16

09 Dec '16

YES!!!! Thank you Intel and Nuvoton. I'm getting beautiful sound in the external speakers. The jack detection is a bit flaky, but I can work on that. The code is available at https://github.com/joequant/nau8824

1 0

[alsa-devel] [PATCH v2 1/2] hid-lenovo: Add support for X1 Tablet special keys and LED control
by Dennis Wassenberg 09 Dec '16

09 Dec '16

The Lenovo X1 Tablet Cover is connected via USB. It constists of 1 device with 3 usb interfaces. Interface 0 represents keyboard, interface 1 the function / special keys and LED control, interface 2 is the Synaptics touchpad and pointing stick. This driver will bind to interfaces 0 and 1 and handle function / special keys including LED control. HID: add device id for Lenovo X1 Tablet Cover Signed-off-by: Dennis Wassenberg <dennis.wassenberg(a)secunet.com> --- Changes v1 -> v2 (suggested by Benjamin Tissoires): * Squashed add of device IDs for Lenovo Thinkpad X1 Tablet Cover together with add of support for Lenovo Thinkpad X1 Tablet Cover into one patch drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + drivers/hid/hid-lenovo.c | 549 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/hid-lenovo.h | 15 ++ 4 files changed, 566 insertions(+) create mode 100644 include/linux/hid-lenovo.h diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 6add0b6..ba6a200 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2111,6 +2111,7 @@ void hid_disconnect(struct hid_device *hdev) { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) }, { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14) }, { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM6533) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, { } }; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3466f0d..1f08fb5 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -615,6 +615,7 @@ #define USB_DEVICE_ID_LENOVO_CUSBKBD 0x6047 #define USB_DEVICE_ID_LENOVO_CBTKBD 0x6048 #define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067 +#define USB_DEVICE_ID_LENOVO_X1_COVER 0x6085 #define USB_VENDOR_ID_LG 0x1fd2 #define USB_DEVICE_ID_LG_MULTITOUCH 0x0064 diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 1ac4ff4..4251aac 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -3,9 +3,11 @@ * - ThinkPad USB Keyboard with TrackPoint (tpkbd) * - ThinkPad Compact Bluetooth Keyboard with TrackPoint (cptkbd) * - ThinkPad Compact USB Keyboard with TrackPoint (cptkbd) + * - ThinkPad X1 Cover USB Keyboard with TrackPoint and Touchpad (tpx1cover) * * Copyright (c) 2012 Bernhard Seibold * Copyright (c) 2014 Jamie Lentin <jm(a)lentin.co.uk> + * Copyright (c) 2016 Dennis Wassenberg <dennis.wassenberg(a)secunet.com> */ /* @@ -19,11 +21,19 @@ #include <linux/sysfs.h> #include <linux/device.h> #include <linux/hid.h> +#include <linux/hid-lenovo.h> #include <linux/input.h> #include <linux/leds.h> #include "hid-ids.h" +struct led_table_entry { + struct led_classdev *dev; + uint8_t state; +}; + +static struct led_table_entry hid_lenovo_led_table[HID_LENOVO_LED_MAX]; + struct lenovo_drvdata_tpkbd { int led_state; struct led_classdev led_mute; @@ -42,6 +52,37 @@ struct lenovo_drvdata_cptkbd { int sensitivity; }; +struct lenovo_drvdata_tpx1cover { + uint16_t led_state; + uint8_t fnlock_state; + uint8_t led_present; + struct led_classdev led_mute; + struct led_classdev led_micmute; + struct led_classdev led_fnlock; +}; + +int hid_lenovo_led_set(int led_num, bool on) +{ + struct led_classdev *dev; + + if (led_num >= HID_LENOVO_LED_MAX) + return -EINVAL; + + dev = hid_lenovo_led_table[led_num].dev; + hid_lenovo_led_table[led_num].state = on; + + if (!dev) + return -ENODEV; + + if (!dev->brightness_set) + return -ENODEV; + + dev->brightness_set(dev, on ? LED_FULL : LED_OFF); + + return 0; +} +EXPORT_SYMBOL_GPL(hid_lenovo_led_set); + #define map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c)) static const __u8 lenovo_pro_dock_need_fixup_collection[] = { @@ -86,6 +127,84 @@ static int lenovo_input_mapping_tpkbd(struct hid_device *hdev, return 0; } +static int lenovo_input_mapping_tpx1cover(struct hid_device *hdev, + struct hid_input *hi, struct hid_field *field, + struct hid_usage *usage, unsigned long **bit, int *max) +{ + if ((usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) { + switch (usage->hid & HID_USAGE) { + case 0x0001: // Unknown keys -> Idenditied by usage index! + map_key_clear(KEY_UNKNOWN); + switch (usage->usage_index) { + case 0x8: + input_set_capability(hi->input, EV_KEY, KEY_FN); + break; + + case 0x9: + input_set_capability(hi->input, EV_KEY, KEY_MICMUTE); + break; + + case 0xa: + input_set_capability(hi->input, EV_KEY, KEY_CONFIG); + break; + + case 0xb: + input_set_capability(hi->input, EV_KEY, KEY_SEARCH); + break; + + case 0xc: + input_set_capability(hi->input, EV_KEY, KEY_SETUP); + break; + + case 0xd: + input_set_capability(hi->input, EV_KEY, KEY_SWITCHVIDEOMODE); + break; + + case 0xe: + input_set_capability(hi->input, EV_KEY, KEY_RFKILL); + break; + + default: + return -1; + } + + return 1; + + case 0x006f: // Consumer.006f ---> Key.BrightnessUp + map_key_clear(KEY_BRIGHTNESSUP); + return 1; + + case 0x0070: // Consumer.0070 ---> Key.BrightnessDown + map_key_clear(KEY_BRIGHTNESSDOWN); + return 1; + + case 0x00b7:// Consumer.00b7 ---> Key.StopCD + map_key_clear(KEY_STOPCD); + return 1; + + case 0x00cd: // Consumer.00cd ---> Key.PlayPause + map_key_clear(KEY_PLAYPAUSE); + return 1; + + case 0x00e0: // Consumer.00e0 ---> Absolute.Volume + return 0; + case 0x00e2: // Consumer.00e2 ---> Key.Mute + map_key_clear(KEY_MUTE); + return 1; + + case 0x00e9: // Consumer.00e9 ---> Key.VolumeUp + map_key_clear(KEY_VOLUMEUP); + return 1; + + case 0x00ea: // Consumer.00ea ---> Key.VolumeDown + map_key_clear(KEY_VOLUMEDOWN); + return 1; + } + } + + return 0; +} + static int lenovo_input_mapping_cptkbd(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) @@ -172,6 +291,9 @@ static int lenovo_input_mapping(struct hid_device *hdev, case USB_DEVICE_ID_LENOVO_CBTKBD: return lenovo_input_mapping_cptkbd(hdev, hi, field, usage, bit, max); + case USB_DEVICE_ID_LENOVO_X1_COVER: + return lenovo_input_mapping_tpx1cover(hdev, hi, field, + usage, bit, max); default: return 0; } @@ -362,6 +484,143 @@ static int lenovo_event_cptkbd(struct hid_device *hdev, return 0; } +static enum led_brightness lenovo_led_brightness_get_tpx1cover( + struct led_classdev *led_cdev) +{ + struct device *dev = led_cdev->dev->parent; + struct hid_device *hdev = to_hid_device(dev); + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + int led_nr = 0; + + if (led_cdev == &drv_data->led_mute) + led_nr = 0; + else if (led_cdev == &drv_data->led_micmute) + led_nr = 1; + else if (led_cdev == &drv_data->led_fnlock) + led_nr = 2; + else + return LED_OFF; + + return drv_data->led_state & (1 << led_nr) + ? LED_FULL + : LED_OFF; +} + +static void lenovo_led_brightness_set_tpx1cover(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct device *dev = led_cdev->dev->parent; + struct hid_device *hdev = to_hid_device(dev); + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + struct hid_report *report; + int led_nr = -1; + int led_nr_hw = -1; + + if (led_cdev == &drv_data->led_mute) { + led_nr = 0; + led_nr_hw = 0x64; + } else if (led_cdev == &drv_data->led_micmute) { + led_nr = 1; + led_nr_hw = 0x74; + } else if (led_cdev == &drv_data->led_fnlock) { + led_nr = 2; + led_nr_hw = 0x54; + } else { + hid_warn(hdev, "Invalid LED to set.\n"); + return; + } + + if (value == LED_OFF) + drv_data->led_state &= ~(1 << led_nr); + else + drv_data->led_state |= 1 << led_nr; + + report = hdev->report_enum[HID_OUTPUT_REPORT].report_id_hash[9]; + if (report) { + report->field[0]->value[0] = led_nr_hw; + report->field[0]->value[1] = (drv_data->led_state & (1 << led_nr)) + ? 0x02 : 0x01; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + } +} + +static int lenovo_event_tpx1cover(struct hid_device *hdev, + struct hid_field *field, struct hid_usage *usage, __s32 value) +{ + int ret = 0; + + if ((usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER + && (usage->hid & HID_USAGE) == 0x0001) { + + if (usage->usage_index == 0x8 && value == 1) { + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + + if (drv_data && drv_data->led_present) { + drv_data->fnlock_state = lenovo_led_brightness_get_tpx1cover( + &drv_data->led_fnlock) == LED_OFF ? 1 : 0; + lenovo_led_brightness_set_tpx1cover( + &drv_data->led_fnlock, + drv_data->fnlock_state ? LED_FULL : LED_OFF); + } + } + + if (usage->usage_index == 0x9 && value == 1) { + input_event(field->hidinput->input, EV_KEY, KEY_MICMUTE, 1); + input_sync(field->hidinput->input); + input_event(field->hidinput->input, EV_KEY, KEY_MICMUTE, 0); + input_sync(field->hidinput->input); + ret = 1; + } + + if (usage->usage_index == 0xa && value == 1) { + input_event(field->hidinput->input, EV_KEY, KEY_CONFIG, 1); + input_sync(field->hidinput->input); + input_event(field->hidinput->input, EV_KEY, KEY_CONFIG, 0); + input_sync(field->hidinput->input); + + ret = 1; + } + + if (usage->usage_index == 0xb && value == 1) { + input_event(field->hidinput->input, EV_KEY, KEY_SEARCH, 1); + input_sync(field->hidinput->input); + input_event(field->hidinput->input, EV_KEY, KEY_SEARCH, 0); + input_sync(field->hidinput->input); + + ret = 1; + } + + if (usage->usage_index == 0xc && value == 1) { + input_event(field->hidinput->input, EV_KEY, KEY_SETUP, 1); + input_sync(field->hidinput->input); + input_event(field->hidinput->input, EV_KEY, KEY_SETUP, 0); + input_sync(field->hidinput->input); + + ret = 1; + } + + if (usage->usage_index == 0xd && value == 1) { + input_event(field->hidinput->input, EV_KEY, KEY_SWITCHVIDEOMODE, 1); + input_sync(field->hidinput->input); + input_event(field->hidinput->input, EV_KEY, KEY_SWITCHVIDEOMODE, 0); + input_sync(field->hidinput->input); + + ret = 1; + } + + if (usage->usage_index == 0xe && value == 1) { + input_event(field->hidinput->input, EV_KEY, KEY_RFKILL, 1); + input_sync(field->hidinput->input); + input_event(field->hidinput->input, EV_KEY, KEY_RFKILL, 0); + input_sync(field->hidinput->input); + + ret = 1; + } + } + + return ret; +} + static int lenovo_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { @@ -369,6 +628,8 @@ static int lenovo_event(struct hid_device *hdev, struct hid_field *field, case USB_DEVICE_ID_LENOVO_CUSBKBD: case USB_DEVICE_ID_LENOVO_CBTKBD: return lenovo_event_cptkbd(hdev, field, usage, value); + case USB_DEVICE_ID_LENOVO_X1_COVER: + return lenovo_event_tpx1cover(hdev, field, usage, value); default: return 0; } @@ -731,6 +992,251 @@ static int lenovo_probe_tpkbd(struct hid_device *hdev) return ret; } +static int lenovo_probe_tpx1cover_configure(struct hid_device *hdev) +{ + struct hid_report *report = hdev->report_enum[HID_OUTPUT_REPORT].report_id_hash[9]; + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + + if (!drv_data) + return -ENODEV; + + if (!report) + return -ENOENT; + + report->field[0]->value[0] = 0x54; + report->field[0]->value[1] = 0x20; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + hid_hw_wait(hdev); + + report->field[0]->value[0] = 0x54; + report->field[0]->value[1] = 0x08; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + hid_hw_wait(hdev); + + report->field[0]->value[0] = 0xA0; + report->field[0]->value[1] = 0x02; + hid_hw_request(hdev, report, HID_REQ_SET_REPORT); + hid_hw_wait(hdev); + + lenovo_led_brightness_set_tpx1cover(&drv_data->led_mute, + hid_lenovo_led_table[HID_LENOVO_LED_MUTE].state ? LED_FULL : LED_OFF); + hid_hw_wait(hdev); + + lenovo_led_brightness_set_tpx1cover(&drv_data->led_micmute, + hid_lenovo_led_table[HID_LENOVO_LED_MICMUTE].state ? LED_FULL : LED_OFF); + hid_hw_wait(hdev); + + lenovo_led_brightness_set_tpx1cover(&drv_data->led_fnlock, LED_FULL); + + return 0; +} + +static int lenovo_probe_tpx1cover_special_functions(struct hid_device *hdev) +{ + struct device *dev = &hdev->dev; + struct lenovo_drvdata_tpx1cover *drv_data = NULL; + + size_t name_sz = strlen(dev_name(dev)) + 16; + char *name_led = NULL; + + struct hid_report *report; + bool report_match = 1; + + int ret = 0; + + report = hid_validate_values(hdev, HID_INPUT_REPORT, 2, 0, 3); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_INPUT_REPORT, 3, 0, 16); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_OUTPUT_REPORT, 9, 0, 2); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 32, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 84, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 100, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 116, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 132, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 144, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 162, 0, 1); + report_match &= report ? 1 : 0; + + if (!report_match) { + ret = -ENODEV; + goto err; + } + + drv_data = devm_kzalloc(&hdev->dev, + sizeof(struct lenovo_drvdata_tpx1cover), + GFP_KERNEL); + + if (!drv_data) { + hid_err(hdev, + "Could not allocate memory for tpx1cover driver data\n"); + ret = -ENOMEM; + goto err; + } + + name_led = devm_kzalloc(&hdev->dev, name_sz, GFP_KERNEL); + if (!name_led) { + hid_err(hdev, "Could not allocate memory for mute led data\n"); + ret = -ENOMEM; + goto err_cleanup; + } + snprintf(name_led, name_sz, "%s:amber:mute", dev_name(dev)); + + drv_data->led_mute.name = name_led; + drv_data->led_mute.brightness_get = lenovo_led_brightness_get_tpx1cover; + drv_data->led_mute.brightness_set = lenovo_led_brightness_set_tpx1cover; + drv_data->led_mute.dev = dev; + hid_lenovo_led_table[HID_LENOVO_LED_MUTE].dev = &drv_data->led_mute; + led_classdev_register(dev, &drv_data->led_mute); + + + name_led = devm_kzalloc(&hdev->dev, name_sz, GFP_KERNEL); + if (!name_led) { + hid_err(hdev, + "Could not allocate memory for mic mute led data\n"); + ret = -ENOMEM; + goto err_cleanup; + } + snprintf(name_led, name_sz, "%s:amber:micmute", dev_name(dev)); + + drv_data->led_micmute.name = name_led; + drv_data->led_micmute.brightness_get = lenovo_led_brightness_get_tpx1cover; + drv_data->led_micmute.brightness_set = lenovo_led_brightness_set_tpx1cover; + drv_data->led_micmute.dev = dev; + hid_lenovo_led_table[HID_LENOVO_LED_MICMUTE].dev = &drv_data->led_micmute; + led_classdev_register(dev, &drv_data->led_micmute); + + + name_led = devm_kzalloc(&hdev->dev, name_sz, GFP_KERNEL); + if (!name_led) { + hid_err(hdev, + "Could not allocate memory for FN lock led data\n"); + ret = -ENOMEM; + goto err_cleanup; + } + + snprintf(name_led, name_sz, "%s:amber:fnlock", dev_name(dev)); + + drv_data->led_fnlock.name = name_led; + drv_data->led_fnlock.brightness_get = lenovo_led_brightness_get_tpx1cover; + drv_data->led_fnlock.brightness_set = lenovo_led_brightness_set_tpx1cover; + drv_data->led_fnlock.dev = dev; + hid_lenovo_led_table[HID_LENOVO_LED_FNLOCK].dev = &drv_data->led_fnlock; + led_classdev_register(dev, &drv_data->led_fnlock); + + drv_data->led_state = 0; + drv_data->fnlock_state = 1; + drv_data->led_present = 1; + + hid_set_drvdata(hdev, drv_data); + + return lenovo_probe_tpx1cover_configure(hdev); + +err_cleanup: + if (drv_data->led_fnlock.name) { + led_classdev_unregister(&drv_data->led_fnlock); + devm_kfree(&hdev->dev, (void *) drv_data->led_fnlock.name); + } + + if (drv_data->led_micmute.name) { + led_classdev_unregister(&drv_data->led_micmute); + devm_kfree(&hdev->dev, (void *) drv_data->led_micmute.name); + } + + if (drv_data->led_mute.name) { + led_classdev_unregister(&drv_data->led_mute); + devm_kfree(&hdev->dev, (void *) drv_data->led_mute.name); + } + + if (drv_data) + kfree(drv_data); + +err: + return ret; +} + +static int lenovo_probe_tpx1cover_touch(struct hid_device *hdev) +{ + struct hid_report *report; + bool report_match = 1; + int ret = 0; + + report = hid_validate_values(hdev, HID_INPUT_REPORT, 2, 0, 2); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_INPUT_REPORT, 2, 1, 2); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_INPUT_REPORT, 11, 0, 61); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_INPUT_REPORT, 12, 0, 61); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_INPUT_REPORT, 16, 0, 3); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_INPUT_REPORT, 16, 1, 2); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_OUTPUT_REPORT, 9, 0, 20); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_OUTPUT_REPORT, 10, 0, 20); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 14, 0, 1); + report_match &= report ? 1 : 0; + report = hid_validate_values(hdev, HID_FEATURE_REPORT, 15, 0, 3); + report_match &= report ? 1 : 0; + + if (!report_match) + ret = -ENODEV; + + return ret; +} + +static int lenovo_probe_tpx1cover(struct hid_device *hdev) +{ + int ret = 0; + + /* + * Probing for special function keys and LED control -> usb intf 1 + * Probing for touch input -> usb intf 2 (handled by rmi4 driver) + * Other (keyboard) -> usb intf 0 + */ + if (!lenovo_probe_tpx1cover_special_functions(hdev)) { + // special function keys and LED control + ret = 0; + } else if (!lenovo_probe_tpx1cover_touch(hdev)) { + // handled by rmi + ret = -ENODEV; + } else { + // keyboard + struct lenovo_drvdata_tpx1cover *drv_data; + + drv_data = devm_kzalloc(&hdev->dev, + sizeof(struct lenovo_drvdata_tpx1cover), + GFP_KERNEL); + + if (!drv_data) { + hid_err(hdev, + "Could not allocate memory for tpx1cover driver data\n"); + ret = -ENOMEM; + goto out; + } + + drv_data->led_state = 0; + drv_data->led_present = 0; + drv_data->fnlock_state = 0; + hid_set_drvdata(hdev, drv_data); + + ret = 0; + } + +out: + return ret; +} + static int lenovo_probe_cptkbd(struct hid_device *hdev) { int ret; @@ -803,6 +1309,9 @@ static int lenovo_probe(struct hid_device *hdev, case USB_DEVICE_ID_LENOVO_CBTKBD: ret = lenovo_probe_cptkbd(hdev); break; + case USB_DEVICE_ID_LENOVO_X1_COVER: + ret = lenovo_probe_tpx1cover(hdev); + break; default: ret = 0; break; @@ -843,6 +1352,42 @@ static void lenovo_remove_cptkbd(struct hid_device *hdev) &lenovo_attr_group_cptkbd); } +static void lenovo_remove_tpx1cover(struct hid_device *hdev) +{ + struct lenovo_drvdata_tpx1cover *drv_data = hid_get_drvdata(hdev); + + if (!drv_data) + return; + + if (drv_data->led_present) { + if (drv_data->led_fnlock.name) { + hid_lenovo_led_table[HID_LENOVO_LED_FNLOCK].dev = NULL; + + led_classdev_unregister(&drv_data->led_fnlock); + devm_kfree(&hdev->dev, (void *) drv_data->led_fnlock.name); + } + + if (drv_data->led_micmute.name) { + hid_lenovo_led_table[HID_LENOVO_LED_MICMUTE].dev = NULL; + + led_classdev_unregister(&drv_data->led_micmute); + devm_kfree(&hdev->dev, (void *) drv_data->led_micmute.name); + } + + if (drv_data->led_mute.name) { + hid_lenovo_led_table[HID_LENOVO_LED_MUTE].dev = NULL; + + led_classdev_unregister(&drv_data->led_mute); + devm_kfree(&hdev->dev, (void *) drv_data->led_mute.name); + } + } + + if (drv_data) + devm_kfree(&hdev->dev, drv_data); + + hid_set_drvdata(hdev, NULL); +} + static void lenovo_remove(struct hid_device *hdev) { switch (hdev->product) { @@ -853,6 +1398,9 @@ static void lenovo_remove(struct hid_device *hdev) case USB_DEVICE_ID_LENOVO_CBTKBD: lenovo_remove_cptkbd(hdev); break; + case USB_DEVICE_ID_LENOVO_X1_COVER: + lenovo_remove_tpx1cover(hdev); + break; } hid_hw_stop(hdev); @@ -883,6 +1431,7 @@ static int lenovo_input_configured(struct hid_device *hdev, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CUSBKBD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_CBTKBD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPPRODOCK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, { } }; diff --git a/include/linux/hid-lenovo.h b/include/linux/hid-lenovo.h new file mode 100644 index 0000000..d0b0145 --- /dev/null +++ b/include/linux/hid-lenovo.h @@ -0,0 +1,15 @@ + +#ifndef __HID_LENOVO_H__ +#define __HID_LENOVO_H__ + + +enum { + HID_LENOVO_LED_MUTE, + HID_LENOVO_LED_MICMUTE, + HID_LENOVO_LED_FNLOCK, + HID_LENOVO_LED_MAX, +}; + +int hid_lenovo_led_set(int led_num, bool on); + +#endif /* __HID_LENOVO_H_ */ -- 1.9.1

2 4

[alsa-devel] [PATCH v2 0/8] ASoC: sunxi: Add support for audio codec in A23/H3 SoCs
by Chen-Yu Tsai 09 Dec '16

09 Dec '16

Hi everyone, This is v2 of my Allwinner A23 and H3 audio codec support series. Changes since v1: - Use DEFINE_RES_MEM for the analog path controls block resources. - Added Rob's ack. This series adds support for the audio codec found in Allwinner A23 and H3 SoCs. The design and data paths are similar to the audio codec found in earlier SoCs such as the A31. The analog audio paths are symmetrical with left/right channels and down-mix selectors for mono differential output. What deviates from previous SoCs is that the analog path controls have been moved to a separate control bus, accessed through a message box like register interface in the PRCM block. This necessitates writing a separate component driver for it, which is then tied into the sound card as an ASoC auxiliary device. Patch 1 adds the analog path controls block to the sun6i-prcm driver as a sub-device, for the A23. The H3 currently does not use the PRCM driver. Patch 2 adds PCM and card support for the A23 codec to the sun4i-codec driver. Patch 3 adds a device node for the analog path controls block to the A23 dtsi. Patch 4 adds a device node for the audio codec, and the phandle for the analog path controls block to the A23 dtsi. Patch 5 enables the audio codec for the A23 Q8 tablets. On these tablets the headphone output is driven in DC coupled, or "direct drive", mode. Patch 6 adds PCM and card support for the H3 codec to the sun4i-codec driver. Patch 7 adds device nodes for the audio codec and analog path controls block to the H3 dtsi. Patch 8 enables the audio codec on the Orange Pi PC. The audio output jack on the board is tied to the line out pins on the SoC. Please take a look and let me know what you think. In addition, the sun4i-codec driver is getting pretty large. Maybe we want to split the different parts into different files? Regards ChenYu Chen-Yu Tsai (8): mfd: sun6i-prcm: Add codec analog controls sub-device for Allwinner A23 ASoC: sun4i-codec: Add support for A23 codec ARM: dts: sun8i: Add codec analog path controls node in PRCM for A23/A33 ARM: dts: sun8i-a23: Add device node for internal audio codec ARM: dts: sun8i-a23: q8-tablet: Enable internal audio codec ASoC: sun4i-codec: Add support for H3 codec ARM: dts: sun8i-h3: Add device nodes for audio codec and its analog controls ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec .../devicetree/bindings/sound/sun4i-codec.txt | 14 +- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 + arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 23 +++ arch/arm/boot/dts/sun8i-a23.dtsi | 16 ++ arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 + arch/arm/boot/dts/sun8i-h3.dtsi | 19 +++ drivers/mfd/sun6i-prcm.c | 13 ++ sound/soc/sunxi/sun4i-codec.c | 179 +++++++++++++++++++++ 8 files changed, 274 insertions(+), 2 deletions(-) -- 2.10.2

3 12

[alsa-devel] [PATCH] ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
by Alberto Aguirre 09 Dec '16

09 Dec '16

The Axe-Fx II implicit feedback end point and the data sync endpoint are in different interface descriptors. Add quirk to ensure a sync endpoint is properly configured. Signed-off-by: Alberto Aguirre <albaguirre(a)gmail.com> --- sound/usb/pcm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 44d178e..0fe2d56 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -348,6 +348,16 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, alts = &iface->altsetting[1]; goto add_sync_ep; + case USB_ID(0x2466, 0x8003): + ep = 0x86; + iface = usb_ifnum_to_if(dev, 2); + + if (!iface || iface->num_altsetting == 0) + return -EINVAL; + + alts = &iface->altsetting[1]; + goto add_sync_ep; + } if (attr == USB_ENDPOINT_SYNC_ASYNC && altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC && -- 2.9.3

2 1

[alsa-devel] [PATCH] ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path
by Richard Fitzgerald 09 Dec '16

09 Dec '16

buf was allocated by kzalloc() so it should be passed to kfree() Signed-off-by: Richard Fitzgerald <rf(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm_adsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index ff111a82..593b7d1 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -183,15 +183,15 @@ static struct wm_adsp_buf *wm_adsp_buf_alloc(const void *src, size_t len, struct wm_adsp_buf *buf = kzalloc(sizeof(*buf), GFP_KERNEL); if (buf == NULL) return NULL; buf->buf = vmalloc(len); if (!buf->buf) { - vfree(buf); + kfree(buf); return NULL; } memcpy(buf->buf, src, len); if (list) list_add_tail(&buf->list, list); -- 1.9.1

1 0

[alsa-devel] [PATCH 0/2] alsa-lib: dynamically adapt the avail_min on the slave
by Jiada Wang 09 Dec '16

09 Dec '16

When configuring avail_min to multiple of slave period size it can happen that user waits one slave period longer than needed for available data. Root cause is implicit grabbing of slave samples in avail_update operation. On next entering poll, the slave will wait for the avail_min threshold reached again, as he is not aware that there are already pending samples in the above layer which are not yet provided to user. Solution is to dynamically adapt the avail_min on the slave. Andreas Pape (2): plugin: dynamically update avail_min on slave rate: dynamic update avail_min on slave src/pcm/pcm_plugin.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++- src/pcm/pcm_plugin.h | 3 +++ src/pcm/pcm_rate.c | 2 +- 3 files changed, 51 insertions(+), 2 deletions(-) -- 2.9.3

2 5

[alsa-devel] [PATCH] ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
by Alberto Aguirre 08 Dec '16

08 Dec '16

The Axe-Fx II implicit feedback end point and the data sink endpoint are in different interface descriptors. Add quirk to ensure a sync endpoint is properly configured. Signed-off-by: Alberto Aguirre <albaguirre(a)gmail.com> --- sound/usb/pcm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 44d178e..584f2a6 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -348,6 +348,16 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, alts = &iface->altsetting[1]; goto add_sync_ep; + case USB_ID(0x2466, 0x8003): /* Fractal Audio Axe-Fx II */ + ep = 0x86; + iface = usb_ifnum_to_if(dev, 2); + + if (!iface || iface->num_altsetting == 0) + return -EINVAL; + + alts = &iface->altsetting[1]; + goto add_sync_ep; + } if (attr == USB_ENDPOINT_SYNC_ASYNC && altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC && -- 2.9.3

1 0

[alsa-devel] warnings with clk_disable_unprepare()
by Pierre-Louis Bossart 08 Dec '16

08 Dec '16

Hi, In the modified cht-bsw_rt5645 machine driver for Asus X205TA and T100HA, I disable the audio mclk with a call to clk_disable_unprepare() when I see a SND_SOC_DAPM_EVENT_OFF event in the platform_clock_control hook. For some reason I seem to get multiple SND_SOC_DAPM_EVENT_OFF events and the clock framework complains with dmesg warnings that the refcount is already zero (which has no functional side effect). WARNING: CPU: 0 PID: 2002 at drivers/clk/clk.c:476 clk_unprepare+0x1a/0x21 WARNING: CPU: 2 PID: 2095 at drivers/clk/clk.c:594 clk_core_disable_lock+0x12/0x1b I could fix this in three different ways: - remove multiple SND_SOC_DAPM_EVENT_OFF events (not sure what the root cause is, maybe issues with jack detection?) - call a clk_is_enabled() or clk_refcount() function before calling clk_disable_unprepare() (but they don't seem to exist in include/linux/clk.h) - count the references myself (which does exactly the same as what the clk framework already does so it's not terribly elegant) Any suggestions on what the least-bad solution might be? Thanks -Pierre

2 1

[alsa-devel] [PATCH V2 1/2] ASoC: samsung: include gpio consumer.h
by Fabian Frederick 08 Dec '16

08 Dec '16

Fix the following build errors on X86_32 !GPIOLIB sound/soc/samsung/tm2_wm5110.c:220:3: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror=implicit-function-declaration] sound/soc/samsung/tm2_wm5110.c:438:24: error: implicit declaration of function 'devm_gpiod_get' [-Werror=implicit-function-declaration] Signed-off-by: Fabian Frederick <fabf(a)skynet.be> --- V2: -Add configuration settings (suggested by Krzysztof Kozlowski) sound/soc/samsung/tm2_wm5110.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/samsung/tm2_wm5110.c b/sound/soc/samsung/tm2_wm5110.c index 5cdf7d1..24cc9d6 100644 --- a/sound/soc/samsung/tm2_wm5110.c +++ b/sound/soc/samsung/tm2_wm5110.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/of.h> #include <sound/pcm_params.h> -- 2.7.4

2 1

[alsa-devel] [bug report] ASoC: topology: Only free TLV for volume mixers of a widget
by Dan Carpenter 08 Dec '16

08 Dec '16

Hello Mengdong Lin, The patch eea3dd4f1247: "ASoC: topology: Only free TLV for volume mixers of a widget" from Nov 25, 2016, leads to the following static checker warning: sound/soc/soc-topology.c:1566 soc_tplg_dapm_widget_create() error: uninitialized symbol 'kcontrol_type'. sound/soc/soc-topology.c 1440 static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg, 1441 struct snd_soc_tplg_dapm_widget *w) 1442 { 1443 struct snd_soc_dapm_context *dapm = &tplg->comp->dapm; 1444 struct snd_soc_dapm_widget template, *widget; 1445 struct snd_soc_tplg_ctl_hdr *control_hdr; 1446 struct snd_soc_card *card = tplg->comp->card; 1447 unsigned int kcontrol_type; ^^^^^^^^^^^^^ 1448 int ret = 0; 1449 1450 if (strnlen(w->name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == 1451 SNDRV_CTL_ELEM_ID_NAME_MAXLEN) 1452 return -EINVAL; 1453 if (strnlen(w->sname, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == 1454 SNDRV_CTL_ELEM_ID_NAME_MAXLEN) 1455 return -EINVAL; 1456 1457 dev_dbg(tplg->dev, "ASoC: creating DAPM widget %s id %d\n", 1458 w->name, w->id); 1459 1460 memset(&template, 0, sizeof(template)); 1461 1462 /* map user to kernel widget ID */ 1463 template.id = get_widget_id(w->id); 1464 if (template.id < 0) 1465 return template.id; 1466 1467 template.name = kstrdup(w->name, GFP_KERNEL); 1468 if (!template.name) 1469 return -ENOMEM; 1470 template.sname = kstrdup(w->sname, GFP_KERNEL); 1471 if (!template.sname) { 1472 ret = -ENOMEM; 1473 goto err; 1474 } 1475 template.reg = w->reg; 1476 template.shift = w->shift; 1477 template.mask = w->mask; 1478 template.subseq = w->subseq; 1479 template.on_val = w->invert ? 0 : 1; 1480 template.off_val = w->invert ? 1 : 0; 1481 template.ignore_suspend = w->ignore_suspend; 1482 template.event_flags = w->event_flags; 1483 template.dobj.index = tplg->index; 1484 1485 tplg->pos += 1486 (sizeof(struct snd_soc_tplg_dapm_widget) + w->priv.size); 1487 if (w->num_kcontrols == 0) { 1488 template.num_kcontrols = 0; 1489 goto widget; Assume we hit this goto. 1490 } 1491 1492 control_hdr = (struct snd_soc_tplg_ctl_hdr *)tplg->pos; 1493 dev_dbg(tplg->dev, "ASoC: template %s has %d controls of type %x\n", 1494 w->name, w->num_kcontrols, control_hdr->type); [ snip ] 1546 1547 widget: 1548 ret = soc_tplg_widget_load(tplg, &template, w); 1549 if (ret < 0) 1550 goto hdr_err; 1551 1552 /* card dapm mutex is held by the core if we are loading topology 1553 * data during sound card init. */ 1554 if (card->instantiated) 1555 widget = snd_soc_dapm_new_control(dapm, &template); 1556 else 1557 widget = snd_soc_dapm_new_control_unlocked(dapm, &template); 1558 if (widget == NULL) { 1559 dev_err(tplg->dev, "ASoC: failed to create widget %s controls\n", 1560 w->name); 1561 ret = -ENOMEM; 1562 goto hdr_err; 1563 } 1564 1565 widget->dobj.type = SND_SOC_DOBJ_WIDGET; 1566 widget->dobj.widget.kcontrol_type = kcontrol_type; Then it's not initialized here. I don't know if this causes an issue beyond the static checker warning. 1567 widget->dobj.ops = tplg->ops; 1568 widget->dobj.index = tplg->index; 1569 kfree(template.sname); regards, dan carpenter

2 1

[alsa-devel] [PATCH 1/2] ASoC: zte: spdif and i2s drivers are not zx296702 specific
by Shawn Guo 08 Dec '16

08 Dec '16

From: Shawn Guo <shawn.guo(a)linaro.org> ZTE ZX SPDIF and I2S drivers can work on not only ZX296702 but also other ZTE ZX family SoCs like ZX296718, which is an arm64 platform. Let's make a few renaming and tweak the Kconfig a bit to get the drivers available for other ZTE ZX platforms. Signed-off-by: Shawn Guo <shawn.guo(a)linaro.org> --- sound/soc/zte/Kconfig | 16 ++++++++-------- sound/soc/zte/Makefile | 4 ++-- sound/soc/zte/{zx296702-i2s.c => zx-i2s.c} | 0 sound/soc/zte/{zx296702-spdif.c => zx-spdif.c} | 0 4 files changed, 10 insertions(+), 10 deletions(-) rename sound/soc/zte/{zx296702-i2s.c => zx-i2s.c} (100%) rename sound/soc/zte/{zx296702-spdif.c => zx-spdif.c} (100%) diff --git a/sound/soc/zte/Kconfig b/sound/soc/zte/Kconfig index c47eb25e441f..6d8a90d36315 100644 --- a/sound/soc/zte/Kconfig +++ b/sound/soc/zte/Kconfig @@ -1,17 +1,17 @@ -config ZX296702_SPDIF - tristate "ZX296702 spdif" - depends on SOC_ZX296702 || COMPILE_TEST +config ZX_SPDIF + tristate "ZTE ZX SPDIF Driver Support" + depends on ARCH_ZX || COMPILE_TEST depends on COMMON_CLK select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y or M if you want to add support for codecs attached to the - zx296702 spdif interface + ZTE ZX SPDIF interface -config ZX296702_I2S - tristate "ZX296702 i2s" - depends on SOC_ZX296702 || COMPILE_TEST +config ZX_I2S + tristate "ZTE ZX I2S Driver Support" + depends on ARCH_ZX || COMPILE_TEST depends on COMMON_CLK select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y or M if you want to add support for codecs attached to the - zx296702 i2s interface + ZTE ZX I2S interface diff --git a/sound/soc/zte/Makefile b/sound/soc/zte/Makefile index 254ed2c8c1a0..77768f5fd10c 100644 --- a/sound/soc/zte/Makefile +++ b/sound/soc/zte/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_ZX296702_SPDIF) += zx296702-spdif.o -obj-$(CONFIG_ZX296702_I2S) += zx296702-i2s.o +obj-$(CONFIG_ZX_SPDIF) += zx-spdif.o +obj-$(CONFIG_ZX_I2S) += zx-i2s.o diff --git a/sound/soc/zte/zx296702-i2s.c b/sound/soc/zte/zx-i2s.c similarity index 100% rename from sound/soc/zte/zx296702-i2s.c rename to sound/soc/zte/zx-i2s.c diff --git a/sound/soc/zte/zx296702-spdif.c b/sound/soc/zte/zx-spdif.c similarity index 100% rename from sound/soc/zte/zx296702-spdif.c rename to sound/soc/zte/zx-spdif.c -- 1.9.1

3 5

[alsa-devel] [PATCH] ASoC: Intel: Skylake: remove unused 'out_fmt' variable
by Kirtika Ruchandani 08 Dec '16

08 Dec '16

Commit 4cd9899f0d16 introduced struct skl_module_fmt* out_fmt without using it. Compiling with W=1 gives the below warning, fix it. sound/soc/intel/skylake/skl-topology.c: In function ‘skl_tplg_update_buffer_size’: sound/soc/intel/skylake/skl-topology.c:301:34: warning: variable ‘out_fmt’ set but not used [-Wunused-but-set-variable] This is a harmless warning and is only being fixed to reduce the noise with W=1 in the kernel. Fixes: 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") Cc: Hardik T Shah <hardik.t.shah(a)intel.com> Cc: Omair M Abdullah <omair.m.abdullah(a)intel.com> Cc: Jeeja KP <jeeja.kp(a)intel.com> Cc: Subhransu S. Prusty <subhransu.s.prusty(a)intel.com> Cc: Vinod Koul <vinod.koul(a)intel.com> Cc: Mark Brown <broonie(a)kernel.org> Signed-off-by: Kirtika Ruchandani <kirtika(a)chromium.org> --- sound/soc/intel/skylake/skl-topology.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index bd313c9..4352236a 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -298,7 +298,7 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, struct skl_module_cfg *mcfg) { int multiplier = 1; - struct skl_module_fmt *in_fmt, *out_fmt; + struct skl_module_fmt *in_fmt; int in_rate, out_rate; @@ -306,7 +306,6 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, * change for pin 0 only */ in_fmt = &mcfg->in_fmt[0]; - out_fmt = &mcfg->out_fmt[0]; if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) multiplier = 5; -- 2.8.0.rc3.226.g39d4020

3 3

[alsa-devel] [PATCH] ASoC: Intel: Skylake: remove unused 'runtime' variable
by Kirtika Ruchandani 08 Dec '16

08 Dec '16

skl_platform_open() defines and sets 'struct snd_pcm_runtime* runtime' but does not use it. Compiling with W=1 gives the following warning, fix it. sound/soc/intel/skylake/skl-pcm.c: In function ‘skl_platform_open’: sound/soc/intel/skylake/skl-pcm.c:941:26: warning: variable ‘runtime’ set but not used [-Wunused-but-set-variable] This was introduced with the initial driver commit a40e693c7f5e ("ASoC: Intel: Add Skylake HDA platform driver"). This is a harmless warning and is only being fixed to reduce the noise with W=1 in the kernel. Fixes: a40e693c7f5e ("ASoC: Intel: Add Skylake HDA platform driver") Cc: Jeeja KP <jeeja.kp(a)intel.com> Cc: Subhransu S. Prusty <subhransu.s.prusty(a)intel.com> Cc: Vinod Koul <vinod.koul(a)intel.com> Cc: Mark Brown <broonie(a)kernel.org> Signed-off-by: Kirtika Ruchandani <kirtika(a)chromium.org> --- sound/soc/intel/skylake/skl-pcm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 84b5101..3254507 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -938,14 +938,12 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { static int skl_platform_open(struct snd_pcm_substream *substream) { - struct snd_pcm_runtime *runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai_link *dai_link = rtd->dai_link; dev_dbg(rtd->cpu_dai->dev, "In %s:%s\n", __func__, dai_link->cpu_dai_name); - runtime = substream->runtime; snd_soc_set_runtime_hwparams(substream, &azx_pcm_hw); return 0; -- 2.8.0.rc3.226.g39d4020

2 1

[alsa-devel] [PATCH v5 00/14] ASoC: add OF graph base simple-card
by Kuninori Morimoto 08 Dec '16

08 Dec '16

Hi Rob, Mark These are v5 of OF graph base simple-card patch-set. I removed new "type" property on v4 patch-set, but I noticed that it is necessary for ALSA SoC binding purpose. Thus, this v5 has it again. For example HDMI case, its DT will has video and sound ports. This DT will be used from HDMI Video driver and HDMI sound driver. HDMI video side can handle all somehow, because it is fully under its control. HDMI sound side will just references it. But it can't know total Video/Sound ports number which is necessary for ALSA SoC side. For example, if HDMI video had 4 ports, sound had 2 ports, this case, HDMI sound ports will be port@4, port@5. Here, ALSA SoC side needs to know total 2 sound port, and, it should be handled as 1st / 2nd port. It is impossible without "type" property. 1) - 7) : OF graph new feature 8) - 14) : OF graph base simple-card Kuninori Morimoto (14): 1) Documentation: of: add type property 2) of_graph: add of_graph_get_remote_endpoint() 3) of_graph: add of_graph_port_type_is() 4) of_graph: add of_graph_get_port_parent() 5) of_graph: add of_graph_get_top_port() 6) of_graph: add for_each_of_port() / for_each_of_endpoint_in_port() 7) of_graph: add of_graph_get_endpoint_count() 8) ASoC: simple-card-utils: adjust for graph on asoc_simple_card_parse_card_name 9) ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai() 10) ASoC: simple-card-utils: add asoc_simple_card_try_to_probe_graph_card() 11) ASoC: add simple-graph-card document 12) ASoC: add simple-graph-card support 13) ASoC: add simple-graph-scu-card document 14) ASoC: add simple-graph-scu-card support Documentation/devicetree/bindings/graph.txt | 21 + .../bindings/sound/simple-graph-card.txt | 67 +++ .../bindings/sound/simple-graph-scu-card.txt | 69 +++ drivers/of/base.c | 166 +++++++- include/linux/of_graph.h | 67 +++ include/sound/simple_card_utils.h | 13 + sound/soc/generic/Kconfig | 15 + sound/soc/generic/Makefile | 4 + sound/soc/generic/simple-card-utils.c | 98 ++++- sound/soc/generic/simple-card.c | 2 +- sound/soc/generic/simple-graph-card.c | 461 +++++++++++++++++++++ sound/soc/generic/simple-graph-scu-card.c | 441 ++++++++++++++++++++ sound/soc/generic/simple-scu-card.c | 2 +- 13 files changed, 1413 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/simple-graph-card.txt create mode 100644 Documentation/devicetree/bindings/sound/simple-graph-scu-card.txt create mode 100644 sound/soc/generic/simple-graph-card.c create mode 100644 sound/soc/generic/simple-graph-scu-card.c -- 1.9.1

3 30

[alsa-devel] [PATCH v4 0/2] ALSA controls management using index/device/sub-devices fields
by Arnaud Pouliquen 07 Dec '16

07 Dec '16

Previous discussions summary: - Topic of the patchset: Patch concerns ASoc DAI drivers. Aim is to be able to instantiate PCM control using device field according to the associated PCM char device. For this, a relationship between DAIs PCM control and PCM char device needs to be establish. => Proposal is to add field in DAI driver struct to declare PCM controls that need to be linked to PCM character device on DAI link probing. - Limitation of the patchset: This patchset seems only a first step as 2 concerns are been highlighted: - Patch is limited to "static" DAI-link. This not responds to backend (no_pcm dai links) and some none-DAI codecs, that could register PCm controls. In theses cases it is not possible to establish relationship during probe. => No solution proposed for time beeing. - This patchset does not fix conflict of 2 "identical" PCM controls declared by 2 drivers. For instance, a conflict can exist between a PCM control created in DAI driver and the same control declared in a codec driver. As index field is forced to 0, prefix should be used in codec. => To discuss solution in a separate thread as issue already present without this patchset several approaches seem possible like using index field ( control auto indexation in ASoC) or prefix in Naming. V4: - [PATCH v4 1/2] ASoC: core: allow DAI PCM controls bound to PCM device Fix and rework error management in soc_link_dai_pcm_controls function. - [PATCH v4 2/2] ASoC: sti: bind pcm controls to pcm device. No change since V2. V3: - [PATCH v3 1/2] ASoC: core: allow DAI PCM controls bound to PCM device Code optimization based on Takashi Sakamoto suggestion - [RFC V2 3/3] ASoC: hdmi-codec: Example of PCM control bound to PCM device for multi patch suppressed as it was send as example in previous version. Patch is valid but can have impact on existing drivers as control device field value is updated - [PATCH v3 2/2] ASoC: sti: bind pcm controls to pcm device. No change vs V2 V2: http://www.spinics.net/lists/alsa-devel/msg57045.html Aim of this version is to continue discussion on DAI PCM control focused on ASoC drivers. In this V2 implementation in Soc-core is simplified to limit impact on existing code. Update of the RFC V1 based on discussions: - [RFC 4/4] iecset: allow to select control with device and sub-device numbers no more part of the RFC V2, will be discussed in a separate thread - [RFC 2/4] ALSA: control: increment index field for duplicated control. no more part of the RFC V2, no more need as RFC subject is PCM controls - [RFC V2 1/3] ASoC: core: allow DAI PCM controls bound to PCM device Patch reworked from V1 to simplify implementation - Binding is not done for Dai links tagged with no_pcm (DPCM). - no more possibility to add the controls after the DAI link probing. - [RFC V2 2/3] ASoC: sti: bind PCM controls to PCM device. - [RFC V2 3/3] ASoC: hdmi-codec: Example of PCM control bound to PCM device for multi Example of implementation in STI DAI driver and HDMI-codec drivers V1: http://www.spinics.net/lists/alsa-devel/msg56479.html 1) Alsa-utils patch - iecset: allow to select control with device and sub-device numbers This patch allows to access to 2 iec controls differentiated by device/sub-devices numbers => For me, this patch is mandatory to be able to address the ASoC IEC controls, in case of no fix is implemented to allows index field update in ASoC. 2) Alsa driver patches - ASoC: core: allow PCM control binding to PCM device Add relationship between DAIs PCM controls and PCM device. - ALSA: control: increment index field for duplicated control. Generic implementation of the patch proposed in HDA driver (http://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=ea9b…) - ASoC: sti: use bind_pcm_ctl implementation of bind_pcm_ctl for sti driver. Arnaud Pouliquen (2): ASoC: core: allow DAI PCM controls bound to PCM device ASoC: sti: bind pcm controls to pcm device. include/sound/soc-dai.h | 4 ++++ sound/soc/soc-core.c | 35 +++++++++++++++++++++++++++++++++++ sound/soc/sti/sti_uniperif.c | 33 ++++----------------------------- 3 files changed, 43 insertions(+), 29 deletions(-) -- 1.9.1

3 5

[alsa-devel] [PATCH] speaker-test: Fix chmap wav file selection.
by Arnaud Pouliquen 07 Dec '16

07 Dec '16

The channel selection currently does not work properly when a channel map control is provided but no manual channel map was explicitly requested with "-m". For example, the CEA/HDMI 6ch (surround 5.1) map is: FL, FR, LFE, FC, RL, RR. Tested command: speaker-test -D hdmi -c 6 -t wav Speaker-test tries to play channels in this following order: 0 - Front Left 3 - Front Center 1 - Front Right 5 - Rear Right 4 - Rear Left 2 - LFE But wav file played on associated speakers are not aligned. Here are the real files played: 0- /usr/share/sounds/alsa/Front_Left.wav => OK 3- /usr/share/sounds/alsa/Rear_Right.wav => OK 1- /usr/share/sounds/alsa/Front_Right.wav => OK 5- /usr/share/sounds/alsa/Rear_Center.wav => KO 4- found file /usr/share/sounds/alsa/Front_Center.wav => KO 2- /usr/share/sounds/alsa/Rear_Left.wav => KO Issue is that associated wav files ordering is reworked only if channel_map_set variable is set. Fix consists in allowing wavs re-ordering if a channel mapping as been get or set, i.e. channel_map is not null. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen(a)st.com> --- speaker-test/speaker-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/speaker-test/speaker-test.c b/speaker-test/speaker-test.c index 5b9cbec..46b0589 100644 --- a/speaker-test/speaker-test.c +++ b/speaker-test/speaker-test.c @@ -843,7 +843,7 @@ static int setup_wav_file(int chn) return check_wav_file(chn, given_test_wav_file); #ifdef CONFIG_SUPPORT_CHMAP - if (channel_map_set && chn < channel_map->channels) { + if (channel_map && chn < channel_map->channels) { int channel = channel_map->pos[chn] - SND_CHMAP_FL; if (channel >= 0 && channel < MAX_CHANNELS) return check_wav_file(chn, wavs[channel]); -- 1.9.1

2 1

[alsa-devel] [PATCH] ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params
by Kuninori Morimoto 07 Dec '16

07 Dec '16

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> ssi->usrcnt will be updated on snd_soc_dai_ops::trigger, but snd_pcm_ops::hw_params will be called *before* it. Thus, ssi->usrcnt is still 0 when 1st call. rsnd_ssi_hw_params() needs to check its called count, this means trigger should be if (ssi->usrcnt) instead of if (ssi->usrcnt > 1). Reported-by: Nguyen Viet Dung <nv-dung(a)jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/sh/rcar/ssi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 932047a..dcb3d0a 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -433,11 +433,14 @@ static int rsnd_ssi_hw_params(struct rsnd_mod *mod, int chan = params_channels(params); /* - * Already working. - * It will happen if SSI has parent/child connection. + * snd_pcm_ops::hw_params will be called *before* + * snd_soc_dai_ops::trigger. Thus, ssi->usrcnt is 0 + * in 1st call. */ - if (ssi->usrcnt > 1) { + if (ssi->usrcnt) { /* + * Already working. + * It will happen if SSI has parent/child connection. * it is error if child <-> parent SSI uses * different channels. */ -- 1.9.1

2 1

[alsa-devel] [PATCH 0/2] ASoC: rsnd: fixup Suspend/Resume clock issue
by Kuninori Morimoto 07 Dec '16

07 Dec '16

Hi Mark These patches fixup Renesas sound's clock stopping issue when Suspend/Resume. These are tested on R-Car Gen3 Salvator-X board Kuninori Morimoto (2): ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting ASoC: rsnd: enable/disable ADG when suspend/resume timing sound/soc/sh/rcar/adg.c | 59 +++++++++++++++++++++++++++++------------------- sound/soc/sh/rcar/core.c | 24 ++++++++++++++++++++ sound/soc/sh/rcar/rsnd.h | 3 +++ 3 files changed, 63 insertions(+), 23 deletions(-) -- 2.7.4

2 4

[alsa-devel] Cherry trail and Nau 88l24 codec
by Joseph Wang 07 Dec '16

07 Dec '16

Hi all, I've been trying to get sound working on my W9S pipo device. The people at Nuvoton have been extraordinarily helpful, but now the issue is writing the machine driver. My work is at https://github.com/joequant/nau8824 I've gotten the drivers to load, but getting timeouts with the firmware.... [ 102.447840] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 [ 102.447872] intel_sst_acpi 808622A8:00: fw returned err -16 [ 103.471448] intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x2 fw_state 0x3 and then [ 116.820782] intel_sst_acpi 808622A8:00: fw returned err -16 [ 116.938921] intel_sst_acpi 808622A8:00: FW sent error response 0x5000e [ 116.939065] intel_sst_acpi 808622A8:00: FW sent error response 0x5000e [ 116.939579] intel_sst_acpi 808622A8:00: FW sent async error msg: [ 116.939614] (null)00040021 00000000 [ 116.939685] (null)00040021 00000000 [ 116.953260] sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp2-port [ 116.953704] intel_sst_acpi 808622A8:00: Alloc for str 3 pipe 0xe [ 116.954062] sst-mfld-sst-mfld-platform: SET_SWM cmd max inputs reached One other path is that ICube has gotten this codec to work on their iwork8 Ultimate android device. They are required to release the source under GPL2, but haven't done so, so if all else fails, it will be a matter of tracking down someone in that company and explaining the issues to them. Since I'm in Hong Kong, I might just find where the things are manufactured, and just show up at their office. But it appears that there are some "magic bits" that are missing. One question that I have is what is the proper DAI to use (i.e. PCM or I2S) for cherry trail. The second question is that looking at the windows driver for nau88l24, there appears to be a test mode that runs the driver against a Realtek rt5645. Should I assume that this means that the initialization is similar? Also I'm quite interested in getting this to work. The W9S Pipo is a perfect netbook that has a big screen that is half the weight of my old laptop. The big thing is that someone realized that instead of putting in a SATA hard disk, that they can use an SD card as main storage, and that cuts down on the weight.

3 10

[alsa-devel] [patch] ALSA: cs46xx: add a new line
by Dan Carpenter 07 Dec '16

07 Dec '16

We accidentally deleted a newline so now the "nreallocated++;" statement is hanging out way off to the right of the screen. Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/sound/pci/cs46xx/dsp_spos.c b/sound/pci/cs46xx/dsp_spos.c index 4a0cbd2241d8..aa61615288ff 100644 --- a/sound/pci/cs46xx/dsp_spos.c +++ b/sound/pci/cs46xx/dsp_spos.c @@ -107,7 +107,8 @@ static int shadow_and_reallocate_code (struct snd_cs46xx * chip, u32 * data, u32 dev_dbg(chip->card->dev, "handle_wideop:[2] %05x:%05x addr %04x\n", - hival, loval, address); nreallocated++; + hival, loval, address); + nreallocated++; } /* wide_opcodes[j] == wide_op */ } /* for */ } /* mod_type == 0 ... */

2 1

[alsa-devel] [PATCH v7 0/3] Media Device Allocator API
by Shuah Khan 07 Dec '16

07 Dec '16

Media Device Allocator API to allows multiple drivers share a media device. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Patches 0001 and 0002 are rebased to 4.9-rc7. Patch 0003 for snd-usb-audio is a rebase of the patch that was tested with the original Media Device Allocator patch series. snd-usb-audio patch includes the fixes found during 4.7-rc1 time in the original snd-usb-audio patch. Changes to patches in this series: Changes to patch 0001 since v6: - No changes Changes to patch 0002 since v6: - No changes Changes to patch 0003 since v6: - Addressed Takashi's review comments on patch v6 Depends on: https://lkml.org/lkml/2016/11/29/1001 Changes to patch 0001 since v5: (comments from Mauro and Sakari) - Removed struct device from media_device_instance. mdev.dev is used instead. - Added documentation. Changes to patch 0002: - No changes since patch v2, applies cleanly on top of the following: media: Protect enable_source and disable_source handler code paths https://lkml.org/lkml/2016/11/29/1001 Changes to patch 0003: - Changed to hold graph_mutex to check and call enable_source and disable_source handlers - to match au0828 doing the same in: media: Protect enable_source and disable_source handler code paths https://lkml.org/lkml/2016/11/29/1001 Changes to patch 0001 since v4: - Addressed Sakari's review comments with the exception of opting to not introduce media_device_usb_allocate() macro, and to not add a new routine to find media device instance to avoid a one line check. Changes to patch 0001 since v3: - Fixed undefined reference to `__media_device_usb_init compile error when CONFIG_USB is disabled. - Fixed kernel paging error when accessing /dev/mediaX after rmmod of the module that owns the media_device. The fix bumps the reference count for the owner when second driver comes along to share the media_device. If au0828 owns the media_device, then snd_usb_audio will bump the refcount for au0828, so it won't get deleted and vice versa. Changes to patch 0002 since v2: - Updated media_device_delete() to pass in module name. Changes to patch 0003 since the last version in 4.7-rc1: - Included fixes to bugs found during testing. - Updated to use the Media Allocator API. This patch series has been tested with au0828 and snd-usb-audio drivers. Ran bind and unbind loop tests on each driver with mc_nextgen_test and media_device_test app loop tests while checking lsmod and dmesg. Please refer to tools/testing/selftests/media_tests/regression_test.txt for testing done on this series. Shuah Khan (3): media: Media Device Allocator API media: change au0828 to use Media Device Allocator API sound/usb: Use Media Controller API to share media resources Documentation/media/kapi/mc-core.rst | 37 ++++ drivers/media/Makefile | 3 +- drivers/media/media-dev-allocator.c | 133 ++++++++++++++ drivers/media/usb/au0828/au0828-core.c | 12 +- drivers/media/usb/au0828/au0828.h | 1 + include/media/media-dev-allocator.h | 54 ++++++ sound/usb/Kconfig | 4 + sound/usb/Makefile | 2 + sound/usb/card.c | 14 ++ sound/usb/card.h | 3 + sound/usb/media.c | 321 +++++++++++++++++++++++++++++++++ sound/usb/media.h | 73 ++++++++ sound/usb/mixer.h | 3 + sound/usb/pcm.c | 29 ++- sound/usb/quirks-table.h | 1 + sound/usb/stream.c | 2 + sound/usb/usbaudio.h | 6 + 17 files changed, 684 insertions(+), 14 deletions(-) create mode 100644 drivers/media/media-dev-allocator.c create mode 100644 include/media/media-dev-allocator.h create mode 100644 sound/usb/media.c create mode 100644 sound/usb/media.h -- 2.7.4

1 3

[alsa-devel] [patch] dbri: move dereference after check for NULL
by Dan Carpenter 06 Dec '16

06 Dec '16

We accidentally introduced a dereference before the NULL check in xmit_descs() as part of silencing a GCC warning. Fixes: 16f46050e709 ("dbri: Fix compiler warning") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- Goes into the sparc tree. diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 3fe4468..52063b2 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -1702,7 +1702,7 @@ interrupts are disabled. static void xmit_descs(struct snd_dbri *dbri) { struct dbri_streaminfo *info; - u32 dvma_addr = (u32)dbri->dma_dvma; + u32 dvma_addr; s32 *cmd; unsigned long flags; int first_td; @@ -1710,6 +1710,7 @@ static void xmit_descs(struct snd_dbri *dbri) if (dbri == NULL) return; /* Disabled */ + dvma_addr = (u32)dbri->dma_dvma; info = &dbri->stream_info[DBRI_REC]; spin_lock_irqsave(&dbri->lock, flags);

2 1

[alsa-devel] Applied "ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture" to the asoc tree
by Mark Brown 06 Dec '16

06 Dec '16

The patch ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From c1aee1d828caa86a663c57a56eead7fd5f22d80f Mon Sep 17 00:00:00 2001 From: Sathyanarayana Nujella <sathyanarayana.nujella(a)intel.com> Date: Tue, 6 Dec 2016 07:08:36 -0800 Subject: [PATCH] ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture This patch updates FE channel constraints & BE fixup to support quad channel DMIC capture. DMIC pin's BE fixup is configured based on channel input, i.e. either stereo or quad. Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella(a)intel.com> Signed-off-by: Harsha Priya <harshapriya.n(a)intel.com> Acked-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index bff80b467262..3a8c24a59020 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -30,6 +30,7 @@ #define BXT_DIALOG_CODEC_DAI "da7219-hifi" #define BXT_MAXIM_CODEC_DAI "HiFi" #define DUAL_CHANNEL 2 +#define QUAD_CHANNEL 4 static struct snd_soc_jack broxton_headset; @@ -182,6 +183,16 @@ static struct snd_pcm_hw_constraint_list constraints_channels = { .mask = 0, }; +static unsigned int channels_quad[] = { + QUAD_CHANNEL, +}; + +static struct snd_pcm_hw_constraint_list constraints_channels_quad = { + .count = ARRAY_SIZE(channels_quad), + .list = channels_quad, + .mask = 0, +}; + static int bxt_fe_startup(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -258,7 +269,10 @@ static int broxton_dmic_fixup(struct snd_soc_pcm_runtime *rtd, { struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); - channels->min = channels->max = DUAL_CHANNEL; + if (params_channels(params) == 2) + channels->min = channels->max = 2; + else + channels->min = channels->max = 4; return 0; } @@ -267,9 +281,9 @@ static int broxton_dmic_startup(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - runtime->hw.channels_max = DUAL_CHANNEL; + runtime->hw.channels_min = runtime->hw.channels_max = QUAD_CHANNEL; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - &constraints_channels); + &constraints_channels_quad); return snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); -- 2.10.2

1 0

[alsa-devel] [PATCH] ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture
by sathyanarayana.nujella＠intel.com 06 Dec '16

06 Dec '16

From: Sathyanarayana Nujella <sathyanarayana.nujella(a)intel.com> This patch updates FE channel constraints & BE fixup to support quad channel DMIC capture. DMIC pin's BE fixup is configured based on channel input, i.e. either stereo or quad. Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella(a)intel.com> Signed-off-by: Harsha Priya <harshapriya.n(a)intel.com> Acked-by: Vinod Koul <vinod.koul(a)intel.com> --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index bff80b4..3a8c24a 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -30,6 +30,7 @@ #define BXT_DIALOG_CODEC_DAI "da7219-hifi" #define BXT_MAXIM_CODEC_DAI "HiFi" #define DUAL_CHANNEL 2 +#define QUAD_CHANNEL 4 static struct snd_soc_jack broxton_headset; @@ -182,6 +183,16 @@ static struct snd_pcm_hw_constraint_list constraints_channels = { .mask = 0, }; +static unsigned int channels_quad[] = { + QUAD_CHANNEL, +}; + +static struct snd_pcm_hw_constraint_list constraints_channels_quad = { + .count = ARRAY_SIZE(channels_quad), + .list = channels_quad, + .mask = 0, +}; + static int bxt_fe_startup(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -258,7 +269,10 @@ static int broxton_dmic_fixup(struct snd_soc_pcm_runtime *rtd, { struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); - channels->min = channels->max = DUAL_CHANNEL; + if (params_channels(params) == 2) + channels->min = channels->max = 2; + else + channels->min = channels->max = 4; return 0; } @@ -267,9 +281,9 @@ static int broxton_dmic_startup(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - runtime->hw.channels_max = DUAL_CHANNEL; + runtime->hw.channels_min = runtime->hw.channels_max = QUAD_CHANNEL; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - &constraints_channels); + &constraints_channels_quad); return snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); -- 2.8.4

1 0

[alsa-devel] [PATCH 0/2 v2] usb-audio misc fix
by Jiada Wang 06 Dec '16

06 Dec '16

This patch set contains the following patches Andreas Pape (1): ALSA: usb-audio: more tolerant packetsize Daniel Girnus (1): ALSA: usb-audio: avoid setting of sample rate multiple times on bus sound/usb/endpoint.c | 4 ++-- sound/usb/pcm.c | 21 +++++++++++---------- 2 files changed, 13 insertions(+), 12 deletions(-) -- 2.9.3

3 5

[alsa-devel] [PATCH] ASoC: nau8825: disable sinc filter for high THD of ADC
by John Hsu 06 Dec '16

06 Dec '16

This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD. Therefor, disable the filter when codec initiation for better performance when recording. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> --- sound/soc/codecs/nau8825.c | 3 ++- sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 2b89569..efe3a44 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1846,7 +1846,8 @@ static void nau8825_init_regs(struct nau8825 *nau8825) * (audible hiss). Set it to something better. */ regmap_update_bits(regmap, NAU8825_REG_ADC_RATE, - NAU8825_ADC_SYNC_DOWN_MASK, NAU8825_ADC_SYNC_DOWN_64); + NAU8825_ADC_SYNC_DOWN_MASK | NAU8825_ADC_SINC4_EN, + NAU8825_ADC_SYNC_DOWN_64); regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64); /* Disable DACR/L power */ diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 0672a25..5d1704e 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -269,6 +269,8 @@ #define NAU8825_BIQ_PATH_DAC (1 << NAU8825_BIQ_PATH_SFT) /* ADC_RATE (0x2b) */ +#define NAU8825_ADC_SINC4_SFT 4 +#define NAU8825_ADC_SINC4_EN (1 << NAU8825_ADC_SINC4_SFT) #define NAU8825_ADC_SYNC_DOWN_SFT 0 #define NAU8825_ADC_SYNC_DOWN_MASK 0x3 #define NAU8825_ADC_SYNC_DOWN_32 0 -- 2.6.4

2 3

[alsa-devel] [PATCH] ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting
by Axel Lin 06 Dec '16

06 Dec '16

The logic of "value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_XXXXXX;" is unnecessary complex. By setting CS35L34_MCLK_DIV | CS35L34_MCLK_RATE_MASK as the mask for regmap_update_bits() call, what the code does is exactly the same as setting value = CS35L34_MCLK_RATE_XXXXXX. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/codecs/cs35l34.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs35l34.c b/sound/soc/codecs/cs35l34.c index e0f672a..7c5d151 100644 --- a/sound/soc/codecs/cs35l34.c +++ b/sound/soc/codecs/cs35l34.c @@ -610,15 +610,15 @@ static int cs35l34_dai_set_sysclk(struct snd_soc_dai *dai, switch (freq) { case CS35L34_MCLK_5644: - value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_5P6448; + value = CS35L34_MCLK_RATE_5P6448; cs35l34->mclk_int = freq; break; case CS35L34_MCLK_6: - value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_6P0000; + value = CS35L34_MCLK_RATE_6P0000; cs35l34->mclk_int = freq; break; case CS35L34_MCLK_6144: - value = ~CS35L34_MCLK_DIV & CS35L34_MCLK_RATE_6P1440; + value = CS35L34_MCLK_RATE_6P1440; cs35l34->mclk_int = freq; break; case CS35L34_MCLK_11289: -- 2.9.3

3 2

[alsa-devel] [PATCH] ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
by Takashi Iwai 06 Dec '16

06 Dec '16

HP Z1 Gen3 AiO with Conexant codec doesn't give an unsolicited event to the headset mic pin upon the jack plugging, it reports only to the headphone pin. It results in the missing mic switching. Let's fix up by simply gating the jack event. Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/pci/hda/patch_conexant.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index ed62748a6d55..c15c51bea26d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -262,6 +262,7 @@ enum { CXT_FIXUP_CAP_MIX_AMP_5047, CXT_FIXUP_MUTE_LED_EAPD, CXT_FIXUP_HP_SPECTRE, + CXT_FIXUP_HP_GATE_MIC, }; /* for hda_fixup_thinkpad_acpi() */ @@ -633,6 +634,17 @@ static void cxt_fixup_cap_mix_amp_5047(struct hda_codec *codec, (1 << AC_AMPCAP_MUTE_SHIFT)); } +static void cxt_fixup_hp_gate_mic_jack(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + /* the mic pin (0x19) doesn't give an unsolicited event; + * probe the mic pin together with the headphone pin (0x16) + */ + if (action == HDA_FIXUP_ACT_PROBE) + snd_hda_jack_set_gating_jack(codec, 0x19, 0x16); +} + /* ThinkPad X200 & co with cxt5051 */ static const struct hda_pintbl cxt_pincfg_lenovo_x200[] = { { 0x16, 0x042140ff }, /* HP (seq# overridden) */ @@ -774,6 +786,10 @@ static const struct hda_fixup cxt_fixups[] = { { } } }, + [CXT_FIXUP_HP_GATE_MIC] = { + .type = HDA_FIXUP_FUNC, + .v.func = cxt_fixup_hp_gate_mic_jack, + }, }; static const struct snd_pci_quirk cxt5045_fixups[] = { @@ -824,6 +840,7 @@ static const struct snd_pci_quirk cxt5066_fixups[] = { SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_ASPIRE_DMIC), SND_PCI_QUIRK(0x1025, 0x054f, "Acer Aspire 4830T", CXT_FIXUP_ASPIRE_DMIC), SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE), + SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC), SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN), SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT_FIXUP_OLPC_XO), SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410), -- 2.11.0

1 0

[alsa-devel] [PATCH v2] ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
by Kai-Heng Feng 06 Dec '16

06 Dec '16

Commit [64047d7f4912 ALSA: hda - ignore the assoc and seq when comparing pin configurations] intented to ignore both seq and assoc at pin comparing, but it only ignored seq. So that commit may still fail to match pins on some machines. Change the bitmask to also ignore assoc. v2: Use macro to do bit masking. Thanks to Hui Wang for the analysis. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/pci/hda/hda_auto_parser.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c index 4ad29f8..a03cf68 100644 --- a/sound/pci/hda/hda_auto_parser.c +++ b/sound/pci/hda/hda_auto_parser.c @@ -884,6 +884,8 @@ void snd_hda_apply_fixup(struct hda_codec *codec, int action) } EXPORT_SYMBOL_GPL(snd_hda_apply_fixup); +#define IGNORE_SEQ_ASSOC (~(AC_DEFCFG_SEQUENCE | AC_DEFCFG_DEF_ASSOC)) + static bool pin_config_match(struct hda_codec *codec, const struct hda_pintbl *pins) { @@ -901,7 +903,7 @@ static bool pin_config_match(struct hda_codec *codec, for (; t_pins->nid; t_pins++) { if (t_pins->nid == nid) { found = 1; - if ((t_pins->val & 0xfffffff0) == (cfg & 0xfffffff0)) + if ((t_pins->val & IGNORE_SEQ_ASSOC) == (cfg & IGNORE_SEQ_ASSOC)) break; else if ((cfg & 0xf0000000) == 0x40000000 && (t_pins->val & 0xf0000000) == 0x40000000) break; -- 2.10.2

2 1

[alsa-devel] [PATCH] ALSA: hda: ignore assoc when comparing pin configurations
by Kai-Heng Feng 06 Dec '16

06 Dec '16

Commit [64047d7f4912 ALSA: hda - ignore the assoc and seq when comparing pin configurations] may still fail to match pins on some machines, because the bitmask it used only ignore seq but not assoc. Change the bitmask to also ignore assoc. Thanks to Hui Wang for the analysis. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> --- sound/pci/hda/hda_auto_parser.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c index 4ad29f8..fdc30d0 100644 --- a/sound/pci/hda/hda_auto_parser.c +++ b/sound/pci/hda/hda_auto_parser.c @@ -901,7 +901,7 @@ static bool pin_config_match(struct hda_codec *codec, for (; t_pins->nid; t_pins++) { if (t_pins->nid == nid) { found = 1; - if ((t_pins->val & 0xfffffff0) == (cfg & 0xfffffff0)) + if ((t_pins->val & 0xffffff00) == (cfg & 0xffffff00)) break; else if ((cfg & 0xf0000000) == 0x40000000 && (t_pins->val & 0xf0000000) == 0x40000000) break; -- 2.10.2

3 3

[alsa-devel] [PATCH v2 0/3] ASoC: intel: atom: Add FW version information
by Sebastien Guiriec 05 Dec '16

05 Dec '16

This patch series is adding FW version information of SST. Version is both log as dev_info and sysfs entry. Update since V1: - sysfs entry is set to "FW not yet loaded" in case we do not have loaded the FW once Sebastien Guiriec (3): ASoC: intel: atom: Add debug information related to FW version ASoC: Intel: atom: save FW version ASoC: Intel: atom: Add sysfs entry in order to store FW version sound/soc/intel/atom/sst/sst.c | 39 ++++++++++++++++++++++++++++++++++++++ sound/soc/intel/atom/sst/sst.h | 1 + sound/soc/intel/atom/sst/sst_ipc.c | 10 +++++++++- 3 files changed, 49 insertions(+), 1 deletion(-) -- 2.9.3 --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

3 5

[alsa-devel] Applied "ASoC: Intel: atom: save FW version" to the asoc tree
by Mark Brown 05 Dec '16

05 Dec '16

The patch ASoC: Intel: atom: save FW version has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From c7da1e9d2641f67e8b20703118ac02fe79604f10 Mon Sep 17 00:00:00 2001 From: Sebastien Guiriec <sebastien.guiriec(a)intel.com> Date: Mon, 5 Dec 2016 17:45:01 +0100 Subject: [PATCH] ASoC: Intel: atom: save FW version After the boot of the SST FW the firmware version is send back to the driver. This patch is saving the FW version inside the driver. Signed-off-by: Sebastien Guiriec <sebastien.guiriec(a)intel.com> Acked-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/intel/atom/sst/sst.h | 1 + sound/soc/intel/atom/sst/sst_ipc.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/sound/soc/intel/atom/sst/sst.h b/sound/soc/intel/atom/sst/sst.h index 3f493862e98d..5c9a51cc77aa 100644 --- a/sound/soc/intel/atom/sst/sst.h +++ b/sound/soc/intel/atom/sst/sst.h @@ -436,6 +436,7 @@ struct intel_sst_drv { */ char firmware_name[FW_NAME_SIZE]; + struct snd_sst_fw_version fw_version; struct sst_fw_save *fw_save; }; diff --git a/sound/soc/intel/atom/sst/sst_ipc.c b/sound/soc/intel/atom/sst/sst_ipc.c index 7934a0047384..374bb61c596d 100644 --- a/sound/soc/intel/atom/sst/sst_ipc.c +++ b/sound/soc/intel/atom/sst/sst_ipc.c @@ -242,6 +242,12 @@ static void process_fw_init(struct intel_sst_drv *sst_drv_ctx, dev_dbg(sst_drv_ctx->dev, "Build date %s Time %s\n", init->build_info.date, init->build_info.time); + /* Save FW version */ + sst_drv_ctx->fw_version.type = init->fw_version.type; + sst_drv_ctx->fw_version.major = init->fw_version.major; + sst_drv_ctx->fw_version.minor = init->fw_version.minor; + sst_drv_ctx->fw_version.build = init->fw_version.build; + ret: sst_wake_up_block(sst_drv_ctx, retval, FW_DWNL_ID, 0 , NULL, 0); } -- 2.10.2

1 0

[alsa-devel] [PATCH v5 0/4] ASoC: intel: atom: Add FW version information
by Sebastien Guiriec 05 Dec '16

05 Dec '16

This patch series is adding FW version information of SST. Version is both log as dev_info and sysfs entry. Update since V1: - sysfs entry is set to "FW not yet loaded" in case we do not have loaded the FW once Update since V2: - Add Vinod ack. https://www.spinics.net/lists/alsa-devel/msg56521.html Update since V3: - Add sysfs entry description. Update since V4: - Add ack from vinod on documentation - Resend on top of v4.9-rc1. Sebastien Guiriec (4): ASoC: intel: atom: Add debug information related to FW version ASoC: Intel: atom: save FW version ASoC: Intel: atom: Add sysfs entry in order to store FW version Documentation: ABI: Add ASoC Intel SST Atom sysfs description Documentation/ABI/testing/sysfs-platform-sst-atom | 17 ++++++++++ sound/soc/intel/atom/sst/sst.c | 39 +++++++++++++++++++++++ sound/soc/intel/atom/sst/sst.h | 1 + sound/soc/intel/atom/sst/sst_ipc.c | 10 +++++- 4 files changed, 66 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/sysfs-platform-sst-atom -- 2.9.3 --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

2 6

[alsa-devel] [PATCH v6 0/3] ASoC: intel: atom: Add FW version information
by Sebastien Guiriec 05 Dec '16

05 Dec '16

This patch series is adding FW version information of SST. Version is both log as dev_info and sysfs entry. Update since V1: - sysfs entry is set to "FW not yet loaded" in case we do not have loaded the FW once Update since V2: - Add Vinod ack. https://www.spinics.net/lists/alsa-devel/msg56521.html Update since V3: - Add sysfs entry description. Update since V4: - Add ack from vinod on documentation - Resend on top of v4.9-rc1. Update since V5: - Resend on top of topic/intel - Remove first patch as the first version was already applied inside topic/intel without getting "Applied" notifiaction. https://www.spinics.net/lists/alsa-devel/msg56122.html Sebastien Guiriec (3): ASoC: Intel: atom: save FW version ASoC: Intel: atom: Add sysfs entry in order to store FW version Documentation: ABI: Add ASoC Intel SST Atom sysfs description Documentation/ABI/testing/sysfs-platform-sst-atom | 17 ++++++++++ sound/soc/intel/atom/sst/sst.c | 39 +++++++++++++++++++++++ sound/soc/intel/atom/sst/sst.h | 1 + sound/soc/intel/atom/sst/sst_ipc.c | 6 ++++ 4 files changed, 63 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-platform-sst-atom -- 2.9.3 --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

1 3

Re: [alsa-devel] [PATCH v3] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
by Peter Ujfalusi 05 Dec '16

05 Dec '16

Hi, On 12/01/2016 03:19 AM, Matt Ranostay wrote: > We can get audio errors if hitting deeper idle states on omaps: > > [alsa.c:230] error: Fatal problem with alsa output, error -5. > [audio.c:614] error: Error in writing audio (Input/output error?)! > > This seems to happen with off mode idle enabled as power for the > whole SoC may get cut off between filling the McBSP fifo using DMA. > While active DMA blocks deeper idle states in hardware, McBSP > activity does not seem to do so. > > Basing the QoS latency on the FIFO size with the approximate delay > required being 2.3 milliseconds per buffer location. > > Note that this is different from snd_pcm_hw_constraint_step() as > that can configure things based on the buffer and period size. > However, that does not help to block idle between the fifo fills. > > Note that in theory some omaps are capable of playing audio while > hitting deeper idle states. If somebody needs that and gets it > working, we can set the latency requirements accordingly. > > Based on the original patch by Tony Lindgren > Link: https://patchwork.kernel.org/patch/9305867/ > > Cc: Tony Lindgren <tony(a)atomide.com> > Cc: Peter Ujfalusi <peter.ujfalusi(a)ti.com> > Signed-off-by: Matt Ranostay <matt(a)ranostay.consulting> > --- > Changes from v1: > * add calculations for latency per number of FIFO locations > > Changes from v2: > * add missing mcbsp.h header change > > sound/soc/omap/mcbsp.c | 15 +++++++++++++++ > sound/soc/omap/mcbsp.h | 2 ++ > 2 files changed, 17 insertions(+) > > diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c > index 06fec5699cc8..b4a773ca2bac 100644 > --- a/sound/soc/omap/mcbsp.c > +++ b/sound/soc/omap/mcbsp.c > @@ -25,6 +25,7 @@ > #include <linux/io.h> > #include <linux/slab.h> > #include <linux/pm_runtime.h> > +#include <linux/pm_qos.h> > > #include <linux/platform_data/asoc-ti-mcbsp.h> > > @@ -637,12 +638,21 @@ void omap_mcbsp_free(struct omap_mcbsp *mcbsp) > * Here we start the McBSP, by enabling transmitter, receiver or both. > * If no transmitter or receiver is active prior calling, then sample-rate > * generator and frame sync are started. > + * > + * Also setting of the QoS latency for the FIFO which varies upon the buffer > + * size. Approximately 2.3 milliseconds per FIFO location. > */ > void omap_mcbsp_start(struct omap_mcbsp *mcbsp, int tx, int rx) > { > int enable_srg = 0; > + int latency = mcbsp->pdata->buffer_size * 23; I think this is not correct. The McBSP FIFO time depends on the sample rate and on the number of channels the audio is using. With 8KHz mono you have 12 times more time per FIFO element compared to 48KHz stereo. As it has been discussed with Tony we should calculate the QoS latency in hw_params: latency_ms = ((FIFOsize - FIFOthreshold) / channels) * 1000/sampling-rate On OMAP3.McBSP2 for example (44.1KHz, stereo): FIFO threshold 128 - DMA request will be triggered when 128 slots are free in the FIFO - at that point we have still 1152 words in the FIFO. - if the C wakeup latency is longer then what it takes to play out the samples from the FIFO (13.06ms), we will drain the FIFO and got underflow. - in this case the QOS should be set as 13.06ms FIFO threshold 1024 - DMA request will be triggered when 1024 slots are free in the FIFO - at that point we have still 256 words in the FIFO. - if the C wakeup latency is longer then what it takes to play out the samples from the FIFO (2.9ms), we will drain the FIFO and got underflow. - in this case the QOS should be 2.9ms On other McBSPs with 128 word FIFO the required latency is shorter to ensure we don't drain the FIFO. > u16 w; > > + /* Prevent omap hardware from hitting off between fifo fills */ > + if (latency) > + pm_qos_add_request(&mcbsp->pm_qos_req, > + PM_QOS_CPU_DMA_LATENCY, latency); > + > if (mcbsp->st_data) > omap_st_start(mcbsp); > > @@ -731,6 +741,8 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx) > > if (mcbsp->st_data) > omap_st_stop(mcbsp); > + > + pm_qos_remove_request(&mcbsp->pm_qos_req); > } > > int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) > @@ -1098,6 +1110,9 @@ int omap_mcbsp_init(struct platform_device *pdev) > > void omap_mcbsp_cleanup(struct omap_mcbsp *mcbsp) > { > + if (pm_qos_request_active(&mcbsp->pm_qos_req)) > + pm_qos_remove_request(&mcbsp->pm_qos_req); > + > if (mcbsp->pdata->buffer_size) > sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group); > > diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h > index 61e93b1c185d..e603f33f4082 100644 > --- a/sound/soc/omap/mcbsp.h > +++ b/sound/soc/omap/mcbsp.h > @@ -325,6 +325,8 @@ struct omap_mcbsp { > unsigned int in_freq; > int clk_div; > int wlen; > + > + struct pm_qos_request pm_qos_req; > }; > > void omap_mcbsp_config(struct omap_mcbsp *mcbsp, > -- Péter

3 4

[alsa-devel] [PATCH] ASoC: cs42l56: Fix misuse of regmap_update_bits
by Florian Vaussard 05 Dec '16

05 Dec '16

Using regmap_update_bits(..., mask, 1) with 'mask' following (1 << k) and k greater than 0 is wrong. Indeed, _regmap_update_bits will perform (mask & 1), which results in 0 if LSB of mask is 0. Thus the call regmap_update_bits(..., mask, 1) is in reality equivalent to regmap_update_bits(..., mask, 0). In such a case, the correct use is regmap_update_bits(..., mask, mask). This driver is performing such a mistake with the CS42L56_AIN*_REF_MASK masks, which equal 0x10, 0x20, 0x40 and 0x80. Fix the driver to make it consistent with the API. Please note that this change is untested, as I do not have this piece of hardware. Testers are welcome! Signed-off-by: Florian Vaussard <florian.vaussard(a)heig-vd.ch> --- sound/soc/codecs/cs42l56.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c index 3e2c046..cb6ca85 100644 --- a/sound/soc/codecs/cs42l56.c +++ b/sound/soc/codecs/cs42l56.c @@ -1277,19 +1277,23 @@ static int cs42l56_i2c_probe(struct i2c_client *i2c_client, if (cs42l56->pdata.ain1a_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN1A_REF_MASK, 1); + CS42L56_AIN1A_REF_MASK, + CS42L56_AIN1A_REF_MASK); if (cs42l56->pdata.ain1b_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN1B_REF_MASK, 1); + CS42L56_AIN1B_REF_MASK, + CS42L56_AIN1B_REF_MASK); if (cs42l56->pdata.ain2a_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN2A_REF_MASK, 1); + CS42L56_AIN2A_REF_MASK, + CS42L56_AIN2A_REF_MASK); if (cs42l56->pdata.ain2b_ref_cfg) regmap_update_bits(cs42l56->regmap, CS42L56_AIN_REFCFG_ADC_MUX, - CS42L56_AIN2B_REF_MASK, 1); + CS42L56_AIN2B_REF_MASK, + CS42L56_AIN2B_REF_MASK); if (cs42l56->pdata.micbias_lvl) regmap_update_bits(cs42l56->regmap, CS42L56_GAIN_BIAS_CTL, -- 2.5.5

4 3

[alsa-devel] [PATCH 1/2] ASoC: topology: Allow a widget to have multiple enum controls
by mengdong.lin＠linux.intel.com 05 Dec '16

05 Dec '16

From: Mengdong Lin <mengdong.lin(a)linux.intel.com> This patch can create multiple enumerated mixer controls for a widget. Previously topology kernel driver assumes a widget can have only one emumerated mixer control. We need to remove this restriction for Broxton. Its firmware modules (widgets) may need multiple enum controls based on the channel and MIC combination. No ABI change is needed. The ABI allows a widget to embed multiple controls. Reported-by: G Kranthi <gudishax.kranthikumar(a)intel.com> Signed-off-by: Mengdong Lin <mengdong.lin(a)linux.intel.com> diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 4dfdc65..63e1a50 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -486,21 +486,24 @@ static void remove_widget(struct snd_soc_component *comp, dobj->ops->widget_unload(comp, dobj); /* - * Dynamic Widgets either have 1 enum kcontrol or 1..N mixers. + * Dynamic Widgets either have 1..N enum kcontrols or mixers. * The enum may either have an array of values or strings. */ if (dobj->widget.kcontrol_enum) { /* enumerated widget mixer */ - struct soc_enum *se = - (struct soc_enum *)w->kcontrols[0]->private_value; + for (i = 0; i < w->num_kcontrols; i++) { + struct snd_kcontrol *kcontrol = w->kcontrols[i]; + struct soc_enum *se = + (struct soc_enum *)kcontrol->private_value; - snd_ctl_remove(card, w->kcontrols[0]); + snd_ctl_remove(card, kcontrol); - kfree(se->dobj.control.dvalues); - for (i = 0; i < se->items; i++) - kfree(se->dobj.control.dtexts[i]); + kfree(se->dobj.control.dvalues); + for (i = 0; i < se->items; i++) + kfree(se->dobj.control.dtexts[i]); - kfree(se); + kfree(se); + } kfree(w->kcontrol_news); } else { /* non enumerated widget mixer */ @@ -1256,98 +1259,105 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create( } static struct snd_kcontrol_new *soc_tplg_dapm_widget_denum_create( - struct soc_tplg *tplg) + struct soc_tplg *tplg, int num_kcontrols) { struct snd_kcontrol_new *kc; struct snd_soc_tplg_enum_control *ec; struct soc_enum *se; - int i, err; - - ec = (struct snd_soc_tplg_enum_control *)tplg->pos; - tplg->pos += (sizeof(struct snd_soc_tplg_enum_control) + - ec->priv.size); - - /* validate kcontrol */ - if (strnlen(ec->hdr.name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == - SNDRV_CTL_ELEM_ID_NAME_MAXLEN) - return NULL; + int i, j, err; - kc = kzalloc(sizeof(*kc), GFP_KERNEL); + kc = kcalloc(num_kcontrols, sizeof(*kc), GFP_KERNEL); if (kc == NULL) return NULL; - se = kzalloc(sizeof(*se), GFP_KERNEL); - if (se == NULL) - goto err; + for (i = 0; i < num_kcontrols; i++) { + ec = (struct snd_soc_tplg_enum_control *)tplg->pos; + /* validate kcontrol */ + if (strnlen(ec->hdr.name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == + SNDRV_CTL_ELEM_ID_NAME_MAXLEN) + return NULL; + + se = kzalloc(sizeof(*se), GFP_KERNEL); + if (se == NULL) + goto err; - dev_dbg(tplg->dev, " adding DAPM widget enum control %s\n", - ec->hdr.name); + dev_dbg(tplg->dev, " adding DAPM widget enum control %s\n", + ec->hdr.name); - kc->name = ec->hdr.name; - kc->private_value = (long)se; - kc->iface = SNDRV_CTL_ELEM_IFACE_MIXER; - kc->access = ec->hdr.access; + kc[i].name = ec->hdr.name; + kc[i].private_value = (long)se; + kc[i].iface = SNDRV_CTL_ELEM_IFACE_MIXER; + kc[i].access = ec->hdr.access; - /* we only support FL/FR channel mapping atm */ - se->reg = tplc_chan_get_reg(tplg, ec->channel, SNDRV_CHMAP_FL); - se->shift_l = tplc_chan_get_shift(tplg, ec->channel, SNDRV_CHMAP_FL); - se->shift_r = tplc_chan_get_shift(tplg, ec->channel, SNDRV_CHMAP_FR); + /* we only support FL/FR channel mapping atm */ + se->reg = tplc_chan_get_reg(tplg, ec->channel, SNDRV_CHMAP_FL); + se->shift_l = tplc_chan_get_shift(tplg, ec->channel, + SNDRV_CHMAP_FL); + se->shift_r = tplc_chan_get_shift(tplg, ec->channel, + SNDRV_CHMAP_FR); - se->items = ec->items; - se->mask = ec->mask; - se->dobj.index = tplg->index; + se->items = ec->items; + se->mask = ec->mask; + se->dobj.index = tplg->index; - switch (ec->hdr.ops.info) { - case SND_SOC_TPLG_CTL_ENUM_VALUE: - case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE: - err = soc_tplg_denum_create_values(se, ec); - if (err < 0) { - dev_err(tplg->dev, "ASoC: could not create values for %s\n", - ec->hdr.name); + switch (ec->hdr.ops.info) { + case SND_SOC_TPLG_CTL_ENUM_VALUE: + case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE: + err = soc_tplg_denum_create_values(se, ec); + if (err < 0) { + dev_err(tplg->dev, "ASoC: could not create values for %s\n", + ec->hdr.name); + goto err_se; + } + /* fall through to create texts */ + case SND_SOC_TPLG_CTL_ENUM: + case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE: + case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT: + err = soc_tplg_denum_create_texts(se, ec); + if (err < 0) { + dev_err(tplg->dev, "ASoC: could not create texts for %s\n", + ec->hdr.name); + goto err_se; + } + break; + default: + dev_err(tplg->dev, "ASoC: invalid enum control type %d for %s\n", + ec->hdr.ops.info, ec->hdr.name); goto err_se; } - /* fall through to create texts */ - case SND_SOC_TPLG_CTL_ENUM: - case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE: - case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT: - err = soc_tplg_denum_create_texts(se, ec); + + /* map io handlers */ + err = soc_tplg_kcontrol_bind_io(&ec->hdr, &kc[i], tplg); + if (err) { + soc_control_err(tplg, &ec->hdr, ec->hdr.name); + goto err_se; + } + + /* pass control to driver for optional further init */ + err = soc_tplg_init_kcontrol(tplg, &kc[i], + (struct snd_soc_tplg_ctl_hdr *)ec); if (err < 0) { - dev_err(tplg->dev, "ASoC: could not create texts for %s\n", + dev_err(tplg->dev, "ASoC: failed to init %s\n", ec->hdr.name); goto err_se; } - break; - default: - dev_err(tplg->dev, "ASoC: invalid enum control type %d for %s\n", - ec->hdr.ops.info, ec->hdr.name); - goto err_se; - } - /* map io handlers */ - err = soc_tplg_kcontrol_bind_io(&ec->hdr, kc, tplg); - if (err) { - soc_control_err(tplg, &ec->hdr, ec->hdr.name); - goto err_se; - } - - /* pass control to driver for optional further init */ - err = soc_tplg_init_kcontrol(tplg, kc, - (struct snd_soc_tplg_ctl_hdr *)ec); - if (err < 0) { - dev_err(tplg->dev, "ASoC: failed to init %s\n", - ec->hdr.name); - goto err_se; + tplg->pos += (sizeof(struct snd_soc_tplg_enum_control) + + ec->priv.size); } return kc; err_se: - /* free values and texts */ - kfree(se->dobj.control.dvalues); - for (i = 0; i < ec->items; i++) - kfree(se->dobj.control.dtexts[i]); + for (; i >= 0; i--) { + /* free values and texts */ + se = (struct soc_enum *)kc[i].private_value; + kfree(se->dobj.control.dvalues); + for (j = 0; j < ec->items; j++) + kfree(se->dobj.control.dtexts[j]); - kfree(se); + kfree(se); + } err: kfree(kc); @@ -1499,9 +1509,10 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg, case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT: case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE: template.dobj.widget.kcontrol_enum = 1; - template.num_kcontrols = 1; + template.num_kcontrols = w->num_kcontrols; template.kcontrol_news = - soc_tplg_dapm_widget_denum_create(tplg); + soc_tplg_dapm_widget_denum_create(tplg, + template.num_kcontrols); if (!template.kcontrol_news) { ret = -ENOMEM; goto hdr_err; -- 2.5.0

2 1

[alsa-devel] [PATCH 2/2] ASoC: topology: Only free TLV for volume mixers of a widget
by mengdong.lin＠linux.intel.com 05 Dec '16

05 Dec '16

From: Mengdong Lin <mengdong.lin(a)linux.intel.com> This patch will check the type of embedded controls for a widget, and only free the TLV of volume mixers. Bytes controls don't have TLV. Just free the private value which is used as struct soc_mixer_control for volume mixers or soc_bytes_ext for bytes controls. No need to cast to these types before freeing it. Signed-off-by: Mengdong Lin <mengdong.lin(a)linux.intel.com> diff --git a/include/sound/soc-topology.h b/include/sound/soc-topology.h index d318fe4..86c884a 100644 --- a/include/sound/soc-topology.h +++ b/include/sound/soc-topology.h @@ -53,7 +53,7 @@ struct snd_soc_dobj_control { /* dynamic widget object */ struct snd_soc_dobj_widget { - unsigned int kcontrol_enum:1; /* this widget is an enum kcontrol */ + unsigned int kcontrol_type; /* kcontrol type: mixer, enum, bytes */ }; /* generic dynamic object - all dynamic objects belong to this struct */ diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 63e1a50..11feb19 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -489,7 +489,7 @@ static void remove_widget(struct snd_soc_component *comp, * Dynamic Widgets either have 1..N enum kcontrols or mixers. * The enum may either have an array of values or strings. */ - if (dobj->widget.kcontrol_enum) { + if (dobj->widget.kcontrol_type == SND_SOC_TPLG_TYPE_ENUM) { /* enumerated widget mixer */ for (i = 0; i < w->num_kcontrols; i++) { struct snd_kcontrol *kcontrol = w->kcontrols[i]; @@ -506,16 +506,21 @@ static void remove_widget(struct snd_soc_component *comp, } kfree(w->kcontrol_news); } else { - /* non enumerated widget mixer */ + /* volume mixer or bytes controls */ for (i = 0; i < w->num_kcontrols; i++) { struct snd_kcontrol *kcontrol = w->kcontrols[i]; - struct soc_mixer_control *sm = - (struct soc_mixer_control *) kcontrol->private_value; - kfree(w->kcontrols[i]->tlv.p); + if (dobj->widget.kcontrol_type + == SND_SOC_TPLG_TYPE_MIXER) + kfree(kcontrol->tlv.p); - snd_ctl_remove(card, w->kcontrols[i]); - kfree(sm); + snd_ctl_remove(card, kcontrol); + + /* Private value is used as struct soc_mixer_control + * for volume mixers or soc_bytes_ext for bytes + * controls. + */ + kfree((void *)kcontrol->private_value); } kfree(w->kcontrol_news); } @@ -1439,6 +1444,7 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg, struct snd_soc_dapm_widget template, *widget; struct snd_soc_tplg_ctl_hdr *control_hdr; struct snd_soc_card *card = tplg->comp->card; + unsigned int kcontrol_type; int ret = 0; if (strnlen(w->name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == @@ -1494,6 +1500,7 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg, case SND_SOC_TPLG_CTL_VOLSW_XR_SX: case SND_SOC_TPLG_CTL_RANGE: case SND_SOC_TPLG_DAPM_CTL_VOLSW: + kcontrol_type = SND_SOC_TPLG_TYPE_MIXER; /* volume mixer */ template.num_kcontrols = w->num_kcontrols; template.kcontrol_news = soc_tplg_dapm_widget_dmixer_create(tplg, @@ -1508,7 +1515,7 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg, case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE: case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT: case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE: - template.dobj.widget.kcontrol_enum = 1; + kcontrol_type = SND_SOC_TPLG_TYPE_ENUM; /* enumerated mixer */ template.num_kcontrols = w->num_kcontrols; template.kcontrol_news = soc_tplg_dapm_widget_denum_create(tplg, @@ -1519,6 +1526,7 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg, } break; case SND_SOC_TPLG_CTL_BYTES: + kcontrol_type = SND_SOC_TPLG_TYPE_BYTES; /* bytes control */ template.num_kcontrols = w->num_kcontrols; template.kcontrol_news = soc_tplg_dapm_widget_dbytes_create(tplg, @@ -1555,6 +1563,7 @@ static int soc_tplg_dapm_widget_create(struct soc_tplg *tplg, } widget->dobj.type = SND_SOC_DOBJ_WIDGET; + widget->dobj.widget.kcontrol_type = kcontrol_type; widget->dobj.ops = tplg->ops; widget->dobj.index = tplg->index; kfree(template.sname); -- 2.5.0

3 2

Re: [alsa-devel] ProjectMix IO Feedback
by Takashi Sakamoto 05 Dec '16

05 Dec '16

\Hi Darren, (C.C.ed to alsa-devel and ffado-user) On Dec 1 2016 19:47, Darren Anderson wrote: > Hi Takashi, > > Just wanted to give you some feedback on how the ProjectMix IO is working > with your changes that were merged into the Linux Kernel. > > Out of the box, on Ubuntu with kernel version 4.4.0-31, on boot, the > interface makes its distinctive popping sound as it sets the clock rate, > showing that the driver is loading fine. It is also now detected by > PulseAudio (without using a jack sink, as I previously had to). I'm then > able to use ffado-mixer to control the device. Thanks for your feedback to ALSA bebob driver. But it's better to post this kind of report to public mailing list, instead of personal address. There might be people who need the information. > There are, however, three issues. > > Firstly, the sample rate seems to be set every time an audio stream is > about to begin. This can be quite irritating at times, due to the > aforementioned distinctive popping sound and lag in the starting of audio > streams. Would it be possible to set the sample rate once at boot time, and > leave it at this unless the user specifically instructs otherwise? Applications can set sampling rate as they want, by ALSA PCM interface. I think it better to keep it what it is unless there's few special cases. For example, ALSA dice driver performs what you expected, due to hardware restriction. Application can't set sampling rate by ALSA PCM interface and they require the other application for this purpose. > Secondly, the main audio seems to be routed from Pulse through the "Aux > 1/2" channel, as opposed to "Mixer 1/2". The device will output no audio > until the "Analog 1/2" output is set to use "Aux 1/2" in FFADO mixer. > However in fixing this issue, a separate issue may be created. As most > distributions play some sort of "start-up sound", and the device seems to > initialize to full volume unless instructed otherwise, the fact that the > output channel needs to be changed may actually save some ear drums. It may > be wise to ask the device to reduce to something reasonable like 25% volume > when the driver is loaded. Or perhaps just mute all outputs by default. Just after booting up, your device has no routing configuration, therefore it generates no sound till configured with use space applications. Default settings of gain/volume are 0dB, perhaps. But this can also be configured from user space applications. What I can do is to produce a way to control devices for applications in user land, and actual way to use the device is left to application developers. If users have something to do, they would do it. > And finally, I've have found that the quality of the audio output from the > device is of a somewhat lower fidelity than the equivalent output on > Windows. I'm currently testing the interface using my KRK Rokit monitor > speakers and finding that the output is lacking in low frequencies. It > sounds as if there is some high pass filtering going on. ALSA bebob driver allows applications to use the device with both of 16 bit sample and 24bit sample with adjusted 8 bit, for playbacking. I guess that your trial is to playback 16 bit PCM sample and looks with highpass filter. Please check the property of PCM substream. > I hope that you find this feedback useful to your ongoing efforts. You're > doing great work. > > If I can do anything else to help, don't hesitate to ask. Cheers Takashi Sakamoto

1 0

[alsa-devel] [PATCH] ASoC: rsnd: rsnd_get_dalign() needs to care SSIU, not SSI
by Kuninori Morimoto 05 Dec '16

05 Dec '16

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> SSIU was controlled by SSI before, but commit c7f69ab53("ASoC: rsnd: use mod base common method on SSIU") separated it into ssiu.c But, it didn't care about rsnd_get_dalign() for judging SSI_BUSIF_DALIGN register value which changes the stream data order. This function will be called from cmd/src/ssiu now, but current code still cares ssi, not ssiu. This patch fix it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> --- sound/soc/sh/rcar/core.c | 6 +++--- sound/soc/sh/rcar/rsnd.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index f181410..28ef9ab 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -306,7 +306,7 @@ u32 rsnd_get_adinr_bit(struct rsnd_mod *mod, struct rsnd_dai_stream *io) */ u32 rsnd_get_dalign(struct rsnd_mod *mod, struct rsnd_dai_stream *io) { - struct rsnd_mod *ssi = rsnd_io_to_mod_ssi(io); + struct rsnd_mod *ssiu = rsnd_io_to_mod_ssiu(io); struct rsnd_mod *target; struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); u32 val = 0x76543210; @@ -315,11 +315,11 @@ u32 rsnd_get_dalign(struct rsnd_mod *mod, struct rsnd_dai_stream *io) if (rsnd_io_is_play(io)) { struct rsnd_mod *src = rsnd_io_to_mod_src(io); - target = src ? src : ssi; + target = src ? src : ssiu; } else { struct rsnd_mod *cmd = rsnd_io_to_mod_cmd(io); - target = cmd ? cmd : ssi; + target = cmd ? cmd : ssiu; } mask <<= runtime->channels * 4; diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index a8f61d7..8ca1705 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -382,6 +382,7 @@ struct rsnd_dai_stream { }; #define rsnd_io_to_mod(io, i) ((i) < RSND_MOD_MAX ? (io)->mod[(i)] : NULL) #define rsnd_io_to_mod_ssi(io) rsnd_io_to_mod((io), RSND_MOD_SSI) +#define rsnd_io_to_mod_ssiu(io) rsnd_io_to_mod((io), RSND_MOD_SSIU) #define rsnd_io_to_mod_ssip(io) rsnd_io_to_mod((io), RSND_MOD_SSIP) #define rsnd_io_to_mod_src(io) rsnd_io_to_mod((io), RSND_MOD_SRC) #define rsnd_io_to_mod_ctu(io) rsnd_io_to_mod((io), RSND_MOD_CTU) -- 2.7.4

2 1

[alsa-devel] [PATCH 0/2] ASoC: cq93vc: enable compiling on COMPILE_TEST
by Kuninori Morimoto 05 Dec '16

05 Dec '16

Hi Lee, Mark Current cq93vc sound codec indicates that it has MFD_DAVINCI_VOICECODEC dependency, but it doesn't. This means we can compile it from non DAVINCE environment by COMPILE_TEST. These patches solve this issue. I tested this on ARCH=x86 + make allyesconfig, and ARCH=ARM + shmobile_defconfig + COMPILE_TEST. Kuninori Morimoto (2): mfd: davinci_voicecodec: tidyup header difinitions ASoC: cq93vc: remove MFD_DAVINCI_VOICECODEC dependency for CQ0093VC drivers/mfd/davinci_voicecodec.c | 1 + include/linux/mfd/davinci_voicecodec.h | 4 ---- sound/soc/codecs/Kconfig | 2 +- 3 files changed, 2 insertions(+), 5 deletions(-) -- 1.9.1

3 9