December 2016 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: simple_card_utils: tidyup file comment/define
by Kuninori Morimoto 05 Dec '16

05 Dec '16

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> simple_card_utils was created as simple_card_core in 1st prototype, and current code still have it. Let's tidyup Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- include/sound/simple_card_utils.h | 8 ++++---- sound/soc/generic/simple-card-utils.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h index fd641255..64e90ca 100644 --- a/include/sound/simple_card_utils.h +++ b/include/sound/simple_card_utils.h @@ -1,5 +1,5 @@ /* - * simple_card_core.h + * simple_card_utils.h * * Copyright (c) 2016 Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> * @@ -7,8 +7,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __SIMPLE_CARD_CORE_H -#define __SIMPLE_CARD_CORE_H +#ifndef __SIMPLE_CARD_UTILS_H +#define __SIMPLE_CARD_UTILS_H #include <sound/soc.h> @@ -68,4 +68,4 @@ void asoc_simple_card_canonicalize_cpu(struct snd_soc_dai_link *dai_link, int asoc_simple_card_clean_reference(struct snd_soc_card *card); -#endif /* __SIMPLE_CARD_CORE_H */ +#endif /* __SIMPLE_CARD_UTILS_H */ diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index e5b80f5..cf02625 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -1,5 +1,5 @@ /* - * simple-card-core.c + * simple-card-utils.c * * Copyright (c) 2016 Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> * -- 2.7.4

2 1

[alsa-devel] [PATCH] ASoC: Intel: Add pre & post suspend calls in bxt machine
by Vinod Koul 05 Dec '16

05 Dec '16

We need to disable jack detection before entering suspend and enable it after resume. This was essential as headphone jack widget will always remain ON if a jack is inserted and this results in no audio after system resumes from a suspend. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur(a)intel.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> --- sound/soc/intel/boards/bxt_rt298.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c index 1309405b3808..b272b72e6a77 100644 --- a/sound/soc/intel/boards/bxt_rt298.c +++ b/sound/soc/intel/boards/bxt_rt298.c @@ -432,6 +432,33 @@ static int bxt_fe_startup(struct snd_pcm_substream *substream) }, }; +static int bxt_suspend_pre(struct snd_soc_card *card) +{ + struct snd_soc_codec *codec; + + list_for_each_entry(codec, &card->codec_dev_list, card_list) { + if (!strcmp(codec->component.name, "i2c-INT343A:00")) { + rt298_mic_detect(codec, NULL); + break; + } + } + return 0; +} + +static int bxt_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_codec *codec; + + list_for_each_entry(codec, &card->codec_dev_list, card_list) { + if (!strcmp(codec->component.name, "i2c-INT343A:00")) { + rt298_mic_detect(codec, &broxton_headset); + break; + } + } + return 0; +} + + /* broxton audio machine driver for SPT + RT298S */ static struct snd_soc_card broxton_rt298 = { .name = "broxton-rt298", @@ -445,6 +472,9 @@ static int bxt_fe_startup(struct snd_pcm_substream *substream) .dapm_routes = broxton_rt298_map, .num_dapm_routes = ARRAY_SIZE(broxton_rt298_map), .fully_routed = true, + .suspend_pre = bxt_suspend_pre, + .resume_post = bxt_resume_post, + }; static int broxton_audio_probe(struct platform_device *pdev) -- 1.9.1

2 1

[alsa-devel] [PATCH] ASoC: cq93vc: enable compiling on COMPILE_TEST
by Kuninori Morimoto 05 Dec '16

05 Dec '16

Hi Mark I posted cq93vc dependency fixup (= no depend to MFD_DAVINCI_VOICECODEC) patch which were 2 patches. [1/2] was tidyup patch for mfd side, and [2/2] was tidyup patch for ASoC Kconfig. [1/2] was accepted by Lee, but [2/2] wasn't. This is for it. This patch is based on Lee's git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git :: for-mfd-next Especially this commit 8ca9edc837932469b81b8b47ea43a074b6add970 ("mfd: davinci_voicecodec: Tidyup header difinitions") Kuninori Morimoto (1): ASoC: cq93vc: remove MFD_DAVINCI_VOICECODEC dependency for CQ0093VC drivers/mfd/davinci_voicecodec.c | 1 + include/linux/mfd/davinci_voicecodec.h | 4 ---- sound/soc/codecs/Kconfig | 2 +- 3 files changed, 2 insertions(+), 5 deletions(-) -- 1.9.1

2 2

[alsa-devel] [PATCH 0/3 v1] usb-misc fix
by Jiada Wang 05 Dec '16

05 Dec '16

This patch set contains the following patches Andreas Pape (1): ALSA: usb-audio: more tolerant packetsize Daniel Girnus (1): ALSA: usb-audio: avoid setting of sample rate multiple times on bus Mark Craske (1): ALSA: usb-audio: fix race in snd_usb_endpoint_stop sound/usb/endpoint.c | 24 ++++++++++++++++-------- sound/usb/pcm.c | 21 +++++++++++---------- 2 files changed, 27 insertions(+), 18 deletions(-) -- 2.9.3

4 22

[alsa-devel] [RFC PATCH v4 7/7] ALSA: x86: hdmi: continue playback even when display resolution changes
by Jerome Anand 02 Dec '16

02 Dec '16

When the display resolution changes, the drm disables the display pipes due to which audio rendering stops. At this time, we need to ensure the existing audio pointers and buffers are cleared out so that the playback can restarted once the display pipe is enabled with a different N/CTS values Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand(a)intel.com> --- sound/x86/intel_hdmi_audio.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index 9249521..d6fd638 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -43,6 +43,7 @@ static DEFINE_MUTEX(had_mutex); static int hdmi_card_index = SNDRV_DEFAULT_IDX1; static char *hdmi_card_id = SNDRV_DEFAULT_STR1; static struct snd_intelhad *had_data; +static int underrun_count; module_param(hdmi_card_index, int, 0444); MODULE_PARM_DESC(hdmi_card_index, @@ -1114,6 +1115,7 @@ static int snd_intelhad_open(struct snd_pcm_substream *substream) intelhaddata = snd_pcm_substream_chip(substream); had_stream = intelhaddata->private_data; runtime = substream->runtime; + underrun_count = 0; pm_runtime_get(intelhaddata->dev); @@ -1506,10 +1508,23 @@ static snd_pcm_uframes_t snd_intelhad_pcm_pointer( buf_id = intelhaddata->curr_buf % 4; had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH), &t); - if (t == 0) { - pr_debug("discovered buffer done for buf %d\n", buf_id); - /* had_process_buffer_done(intelhaddata); */ + + if ((t == 0) || (t == ((u32)-1L))) { + underrun_count++; + pr_debug("discovered buffer done for buf %d, count = %d\n", + buf_id, underrun_count); + + if (underrun_count > (HAD_MIN_PERIODS/2)) { + pr_debug("assume audio_codec_reset, underrun = %d - do xrun\n", + underrun_count); + underrun_count = 0; + return SNDRV_PCM_POS_XRUN; + } + } else { + /* Reset Counter */ + underrun_count = 0; } + t = intelhaddata->buf_info[buf_id].buf_size - t; if (intelhaddata->stream_info.buffer_rendered) -- 2.9.3

1 0

[alsa-devel] [RFC PATCH v4 6/7] ALSA: x86: hdmi: Fixup some monitor
by Jerome Anand 02 Dec '16

02 Dec '16

This change was given to Canonical apparently to fix an issue with on some monitor brand. It's not clear what this patch does but it doesn't seem to have side effects. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand(a)intel.com> --- sound/x86/intel_hdmi_audio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index d9ce750..9249521 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -337,6 +337,7 @@ static void snd_intelhad_reset_audio_v2(u8 reset) static int had_prog_status_reg(struct snd_pcm_substream *substream, struct snd_intelhad *intelhaddata) { + union aud_cfg cfg_val = {.cfg_regval = 0}; union aud_ch_status_0 ch_stat0 = {.status_0_regval = 0}; union aud_ch_status_1 ch_stat1 = {.status_1_regval = 0}; int format; @@ -347,6 +348,7 @@ static int had_prog_status_reg(struct snd_pcm_substream *substream, IEC958_AES0_NONAUDIO)>>1; ch_stat0.status_0_regx.clk_acc = (intelhaddata->aes_bits & IEC958_AES3_CON_CLOCK)>>4; + cfg_val.cfg_regx.val_bit = ch_stat0.status_0_regx.lpcm_id; switch (substream->runtime->rate) { case AUD_SAMPLE_RATE_32: @@ -426,7 +428,6 @@ int snd_intelhad_prog_audio_ctrl_v2(struct snd_pcm_substream *substream, else cfg_val.cfg_regx_v2.layout = LAYOUT1; - cfg_val.cfg_regx_v2.val_bit = 1; had_write_register(AUD_CONFIG, cfg_val.cfg_regval); return 0; } @@ -482,7 +483,6 @@ int snd_intelhad_prog_audio_ctrl_v1(struct snd_pcm_substream *substream, } - cfg_val.cfg_regx.val_bit = 1; had_write_register(AUD_CONFIG, cfg_val.cfg_regval); return 0; } -- 2.9.3

1 0

[alsa-devel] [RFC PATCH v4 5/7] ALSA: x86: hdmi: Improve position reporting
by Jerome Anand 02 Dec '16

02 Dec '16

Use a hw register to calculate sub-period position reports. This makes PulseAudio happier. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand(a)intel.com> --- sound/x86/intel_hdmi_audio.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index 461b7d7..d9ce750 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1492,6 +1492,8 @@ static snd_pcm_uframes_t snd_intelhad_pcm_pointer( { struct snd_intelhad *intelhaddata; u32 bytes_rendered = 0; + u32 t; + int buf_id; /* pr_debug("snd_intelhad_pcm_pointer called\n"); */ @@ -1502,6 +1504,14 @@ static snd_pcm_uframes_t snd_intelhad_pcm_pointer( return SNDRV_PCM_POS_XRUN; } + buf_id = intelhaddata->curr_buf % 4; + had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH), &t); + if (t == 0) { + pr_debug("discovered buffer done for buf %d\n", buf_id); + /* had_process_buffer_done(intelhaddata); */ + } + t = intelhaddata->buf_info[buf_id].buf_size - t; + if (intelhaddata->stream_info.buffer_rendered) div_u64_rem(intelhaddata->stream_info.buffer_rendered, intelhaddata->stream_info.ring_buf_size, @@ -1509,7 +1519,7 @@ static snd_pcm_uframes_t snd_intelhad_pcm_pointer( intelhaddata->stream_info.buffer_ptr = bytes_to_frames( substream->runtime, - bytes_rendered); + bytes_rendered + t); return intelhaddata->stream_info.buffer_ptr; } -- 2.9.3

1 0

[alsa-devel] [RFC PATCH v4 4/7] ALSA: x86: hdmi: Add audio support for BYT and CHT
by Jerome Anand 02 Dec '16

02 Dec '16

Hdmi audio driver based on the child platform device created by gfx driver is implemented. This audio driver is derived from legacy intel hdmi audio driver. The interfaces for interaction between gfx and audio are updated and the driver implementation updated to derive interrupts in its own address space based on irq chip framework Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand(a)intel.com> --- sound/x86/Makefile | 2 + sound/x86/intel_hdmi_audio.c | 1907 ++++++++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_audio.h | 201 ++++ sound/x86/intel_hdmi_audio_if.c | 551 +++++++++++ sound/x86/intel_hdmi_lpe_audio.c | 16 +- 5 files changed, 2671 insertions(+), 6 deletions(-) create mode 100644 sound/x86/intel_hdmi_audio.c create mode 100644 sound/x86/intel_hdmi_audio.h create mode 100644 sound/x86/intel_hdmi_audio_if.c diff --git a/sound/x86/Makefile b/sound/x86/Makefile index 78b2ae1..bc074d0 100644 --- a/sound/x86/Makefile +++ b/sound/x86/Makefile @@ -3,6 +3,8 @@ DRIVER_NAME := hdmi_lpe_audio ccflags-y += -Idrivers/gpu/drm/i915 $(DRIVER_NAME)-objs += \ + intel_hdmi_audio.o \ + intel_hdmi_audio_if.o \ intel_hdmi_lpe_audio.o obj-$(CONFIG_HDMI_LPE_AUDIO) += $(DRIVER_NAME).o diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c new file mode 100644 index 0000000..461b7d7 --- /dev/null +++ b/sound/x86/intel_hdmi_audio.c @@ -0,0 +1,1907 @@ +/* + * intel_hdmi_audio.c - Intel HDMI audio driver + * + * Copyright (C) 2016 Intel Corp + * Authors: Sailaja Bandarupalli <sailaja.bandarupalli(a)intel.com> + * Ramesh Babu K V <ramesh.babu(a)intel.com> + * Vaibhav Agarwal <vaibhav.agarwal(a)intel.com> + * Jerome Anand <jerome.anand(a)intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * ALSA driver for Intel HDMI audio + */ + +#define pr_fmt(fmt) "had: " fmt + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <asm/cacheflush.h> +#include <sound/pcm.h> +#include <sound/core.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/control.h> +#include <sound/initval.h> +#include "intel_hdmi_audio.h" + +static DEFINE_MUTEX(had_mutex); + +/*standard module options for ALSA. This module supports only one card*/ +static int hdmi_card_index = SNDRV_DEFAULT_IDX1; +static char *hdmi_card_id = SNDRV_DEFAULT_STR1; +static struct snd_intelhad *had_data; + +module_param(hdmi_card_index, int, 0444); +MODULE_PARM_DESC(hdmi_card_index, + "Index value for INTEL Intel HDMI Audio controller."); +module_param(hdmi_card_id, charp, 0444); +MODULE_PARM_DESC(hdmi_card_id, + "ID string for INTEL Intel HDMI Audio controller."); + +/* + * ELD SA bits in the CEA Speaker Allocation data block +*/ +static int eld_speaker_allocation_bits[] = { + [0] = FL | FR, + [1] = LFE, + [2] = FC, + [3] = RL | RR, + [4] = RC, + [5] = FLC | FRC, + [6] = RLC | RRC, + /* the following are not defined in ELD yet */ + [7] = 0, +}; + +/* + * This is an ordered list! + * + * The preceding ones have better chances to be selected by + * hdmi_channel_allocation(). + */ +static struct cea_channel_speaker_allocation channel_allocations[] = { +/* channel: 7 6 5 4 3 2 1 0 */ +{ .ca_index = 0x00, .speakers = { 0, 0, 0, 0, 0, 0, FR, FL } }, + /* 2.1 */ +{ .ca_index = 0x01, .speakers = { 0, 0, 0, 0, 0, LFE, FR, FL } }, + /* Dolby Surround */ +{ .ca_index = 0x02, .speakers = { 0, 0, 0, 0, FC, 0, FR, FL } }, + /* surround40 */ +{ .ca_index = 0x08, .speakers = { 0, 0, RR, RL, 0, 0, FR, FL } }, + /* surround41 */ +{ .ca_index = 0x09, .speakers = { 0, 0, RR, RL, 0, LFE, FR, FL } }, + /* surround50 */ +{ .ca_index = 0x0a, .speakers = { 0, 0, RR, RL, FC, 0, FR, FL } }, + /* surround51 */ +{ .ca_index = 0x0b, .speakers = { 0, 0, RR, RL, FC, LFE, FR, FL } }, + /* 6.1 */ +{ .ca_index = 0x0f, .speakers = { 0, RC, RR, RL, FC, LFE, FR, FL } }, + /* surround71 */ +{ .ca_index = 0x13, .speakers = { RRC, RLC, RR, RL, FC, LFE, FR, FL } }, + +{ .ca_index = 0x03, .speakers = { 0, 0, 0, 0, FC, LFE, FR, FL } }, +{ .ca_index = 0x04, .speakers = { 0, 0, 0, RC, 0, 0, FR, FL } }, +{ .ca_index = 0x05, .speakers = { 0, 0, 0, RC, 0, LFE, FR, FL } }, +{ .ca_index = 0x06, .speakers = { 0, 0, 0, RC, FC, 0, FR, FL } }, +{ .ca_index = 0x07, .speakers = { 0, 0, 0, RC, FC, LFE, FR, FL } }, +{ .ca_index = 0x0c, .speakers = { 0, RC, RR, RL, 0, 0, FR, FL } }, +{ .ca_index = 0x0d, .speakers = { 0, RC, RR, RL, 0, LFE, FR, FL } }, +{ .ca_index = 0x0e, .speakers = { 0, RC, RR, RL, FC, 0, FR, FL } }, +{ .ca_index = 0x10, .speakers = { RRC, RLC, RR, RL, 0, 0, FR, FL } }, +{ .ca_index = 0x11, .speakers = { RRC, RLC, RR, RL, 0, LFE, FR, FL } }, +{ .ca_index = 0x12, .speakers = { RRC, RLC, RR, RL, FC, 0, FR, FL } }, +{ .ca_index = 0x14, .speakers = { FRC, FLC, 0, 0, 0, 0, FR, FL } }, +{ .ca_index = 0x15, .speakers = { FRC, FLC, 0, 0, 0, LFE, FR, FL } }, +{ .ca_index = 0x16, .speakers = { FRC, FLC, 0, 0, FC, 0, FR, FL } }, +{ .ca_index = 0x17, .speakers = { FRC, FLC, 0, 0, FC, LFE, FR, FL } }, +{ .ca_index = 0x18, .speakers = { FRC, FLC, 0, RC, 0, 0, FR, FL } }, +{ .ca_index = 0x19, .speakers = { FRC, FLC, 0, RC, 0, LFE, FR, FL } }, +{ .ca_index = 0x1a, .speakers = { FRC, FLC, 0, RC, FC, 0, FR, FL } }, +{ .ca_index = 0x1b, .speakers = { FRC, FLC, 0, RC, FC, LFE, FR, FL } }, +{ .ca_index = 0x1c, .speakers = { FRC, FLC, RR, RL, 0, 0, FR, FL } }, +{ .ca_index = 0x1d, .speakers = { FRC, FLC, RR, RL, 0, LFE, FR, FL } }, +{ .ca_index = 0x1e, .speakers = { FRC, FLC, RR, RL, FC, 0, FR, FL } }, +{ .ca_index = 0x1f, .speakers = { FRC, FLC, RR, RL, FC, LFE, FR, FL } }, +}; + +static struct channel_map_table map_tables[] = { + { SNDRV_CHMAP_FL, 0x00, FL }, + { SNDRV_CHMAP_FR, 0x01, FR }, + { SNDRV_CHMAP_RL, 0x04, RL }, + { SNDRV_CHMAP_RR, 0x05, RR }, + { SNDRV_CHMAP_LFE, 0x02, LFE }, + { SNDRV_CHMAP_FC, 0x03, FC }, + { SNDRV_CHMAP_RLC, 0x06, RLC }, + { SNDRV_CHMAP_RRC, 0x07, RRC }, + {} /* terminator */ +}; + +/* hardware capability structure */ +static const struct snd_pcm_hardware snd_intel_hadstream = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_DOUBLE | + SNDRV_PCM_INFO_MMAP| + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), + .formats = (SNDRV_PCM_FMTBIT_S24 | + SNDRV_PCM_FMTBIT_U24), + .rates = SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000, + .rate_min = HAD_MIN_RATE, + .rate_max = HAD_MAX_RATE, + .channels_min = HAD_MIN_CHANNEL, + .channels_max = HAD_MAX_CHANNEL, + .buffer_bytes_max = HAD_MAX_BUFFER, + .period_bytes_min = HAD_MIN_PERIOD_BYTES, + .period_bytes_max = HAD_MAX_PERIOD_BYTES, + .periods_min = HAD_MIN_PERIODS, + .periods_max = HAD_MAX_PERIODS, + .fifo_size = HAD_FIFO_SIZE, +}; + +/* Register access functions */ + +inline int had_get_hwstate(struct snd_intelhad *intelhaddata) +{ + /* Check for device presence -SW state */ + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + pr_debug("%s:Device not connected:%d\n", __func__, + intelhaddata->drv_status); + return -ENODEV; + } + + return 0; +} + +inline int had_get_caps(enum had_caps_list query, void *caps) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->query_ops.hdmi_audio_get_caps(query, + caps); + + return retval; +} + +inline int had_set_caps(enum had_caps_list set_element, void *caps) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->query_ops.hdmi_audio_set_caps( + set_element, caps); + + return retval; +} + +inline int had_read_register(uint32_t offset, uint32_t *data) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->reg_ops.hdmi_audio_read_register( + offset + intelhaddata->audio_cfg_offset, data); + + return retval; +} + +inline int had_write_register(uint32_t offset, uint32_t data) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->reg_ops.hdmi_audio_write_register( + offset + intelhaddata->audio_cfg_offset, data); + + return retval; +} + +inline int had_read_modify(uint32_t offset, uint32_t data, uint32_t mask) +{ + int retval; + struct snd_intelhad *intelhaddata = had_data; + + retval = had_get_hwstate(intelhaddata); + if (!retval) + retval = intelhaddata->reg_ops.hdmi_audio_read_modify( + offset + intelhaddata->audio_cfg_offset, + data, mask); + + return retval; +} +/** + * had_read_modify_aud_config_v2 - Specific function to read-modify + * AUD_CONFIG register on VLV2.The had_read_modify() function should not + * directly be used on VLV2 for updating AUD_CONFIG register. + * This is because: + * Bit6 of AUD_CONFIG register is writeonly due to a silicon bug on VLV2 + * HDMI IP. As a result a read-modify of AUD_CONFIG regiter will always + * clear bit6. AUD_CONFIG[6:4] represents the "channels" field of the + * register. This field should be 1xy binary for configuration with 6 or + * more channels. Read-modify of AUD_CONFIG (Eg. for enabling audio) + * causes the "channels" field to be updated as 0xy binary resulting in + * bad audio. The fix is to always write the AUD_CONFIG[6:4] with + * appropriate value when doing read-modify of AUD_CONFIG register. + * + * @substream: the current substream or NULL if no active substream + * @data : data to be written + * @mask : mask + * + */ +inline int had_read_modify_aud_config_v2(struct snd_pcm_substream *substream, + uint32_t data, uint32_t mask) +{ + union aud_cfg cfg_val = {.cfg_regval = 0}; + u8 channels; + + /* + * If substream is NULL, there is no active stream. + * In this case just set channels to 2 + */ + if (substream) + channels = substream->runtime->channels; + else + channels = 2; + cfg_val.cfg_regx_v2.num_ch = channels - 2; + + data = data | cfg_val.cfg_regval; + mask = mask | AUD_CONFIG_CH_MASK_V2; + + pr_debug("%s : data = %x, mask =%x\n", __func__, data, mask); + + return had_read_modify(AUD_CONFIG, data, mask); +} + +/** + * snd_intelhad_enable_audio_v1 - to enable audio + * + * @substream: Current substream or NULL if no active substream. + * @enable: 1 if audio is to be enabled; 0 if audio is to be disabled. + * + */ +static void snd_intelhad_enable_audio_v1(struct snd_pcm_substream *substream, + u8 enable) +{ + had_read_modify(AUD_CONFIG, enable, BIT(0)); +} + +/** + * snd_intelhad_enable_audio_v2 - to enable audio + * + * @substream: Current substream or NULL if no active substream. + * @enable: 1 if audio is to be enabled; 0 if audio is to be disabled. + */ +static void snd_intelhad_enable_audio_v2(struct snd_pcm_substream *substream, + u8 enable) +{ + had_read_modify_aud_config_v2(substream, enable, BIT(0)); +} + +/** + * snd_intelhad_reset_audio_v1 - to reset audio subsystem + * + * @reset: 1 to reset audio; 0 to bring audio out of reset. + * + */ +static void snd_intelhad_reset_audio_v1(u8 reset) +{ + had_write_register(AUD_HDMI_STATUS, reset); +} + +/** + * snd_intelhad_reset_audio_v2 - to reset audio subsystem + * + * @reset: 1 to reset audio; 0 to bring audio out of reset. + * + */ +static void snd_intelhad_reset_audio_v2(u8 reset) +{ + had_write_register(AUD_HDMI_STATUS_v2, reset); +} + +/** + * had_prog_status_reg - to initialize audio channel status registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function is called in the prepare callback + */ +static int had_prog_status_reg(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + union aud_ch_status_0 ch_stat0 = {.status_0_regval = 0}; + union aud_ch_status_1 ch_stat1 = {.status_1_regval = 0}; + int format; + + pr_debug("Entry %s\n", __func__); + + ch_stat0.status_0_regx.lpcm_id = (intelhaddata->aes_bits & + IEC958_AES0_NONAUDIO)>>1; + ch_stat0.status_0_regx.clk_acc = (intelhaddata->aes_bits & + IEC958_AES3_CON_CLOCK)>>4; + + switch (substream->runtime->rate) { + case AUD_SAMPLE_RATE_32: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_32KHZ; + break; + + case AUD_SAMPLE_RATE_44_1: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_44KHZ; + break; + case AUD_SAMPLE_RATE_48: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_48KHZ; + break; + case AUD_SAMPLE_RATE_88_2: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_88KHZ; + break; + case AUD_SAMPLE_RATE_96: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_96KHZ; + break; + case AUD_SAMPLE_RATE_176_4: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_176KHZ; + break; + case AUD_SAMPLE_RATE_192: + ch_stat0.status_0_regx.samp_freq = CH_STATUS_MAP_192KHZ; + break; + + default: + /* control should never come here */ + return -EINVAL; + break; + + } + had_write_register(AUD_CH_STATUS_0, ch_stat0.status_0_regval); + + format = substream->runtime->format; + + if (format == SNDRV_PCM_FORMAT_S16_LE) { + ch_stat1.status_1_regx.max_wrd_len = MAX_SMPL_WIDTH_20; + ch_stat1.status_1_regx.wrd_len = SMPL_WIDTH_16BITS; + } else if (format == SNDRV_PCM_FORMAT_S24_LE) { + ch_stat1.status_1_regx.max_wrd_len = MAX_SMPL_WIDTH_24; + ch_stat1.status_1_regx.wrd_len = SMPL_WIDTH_24BITS; + } else { + ch_stat1.status_1_regx.max_wrd_len = 0; + ch_stat1.status_1_regx.wrd_len = 0; + } + had_write_register(AUD_CH_STATUS_1, ch_stat1.status_1_regval); + return 0; +} + +/** + * snd_intelhad_prog_audio_ctrl_v2 - to initialize audio + * registers and buffer confgiuration registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function is called in the prepare callback + */ +int snd_intelhad_prog_audio_ctrl_v2(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + union aud_cfg cfg_val = {.cfg_regval = 0}; + union aud_buf_config buf_cfg = {.buf_cfgval = 0}; + u8 channels; + + had_prog_status_reg(substream, intelhaddata); + + buf_cfg.buf_cfg_regx_v2.audio_fifo_watermark = FIFO_THRESHOLD; + buf_cfg.buf_cfg_regx_v2.dma_fifo_watermark = DMA_FIFO_THRESHOLD; + buf_cfg.buf_cfg_regx_v2.aud_delay = 0; + had_write_register(AUD_BUF_CONFIG, buf_cfg.buf_cfgval); + + channels = substream->runtime->channels; + cfg_val.cfg_regx_v2.num_ch = channels - 2; + if (channels <= 2) + cfg_val.cfg_regx_v2.layout = LAYOUT0; + else + cfg_val.cfg_regx_v2.layout = LAYOUT1; + + cfg_val.cfg_regx_v2.val_bit = 1; + had_write_register(AUD_CONFIG, cfg_val.cfg_regval); + return 0; +} + +/** + * snd_intelhad_prog_audio_ctrl_v1 - to initialize audio + * registers and buffer confgiuration registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function is called in the prepare callback + */ +int snd_intelhad_prog_audio_ctrl_v1(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + union aud_cfg cfg_val = {.cfg_regval = 0}; + union aud_buf_config buf_cfg = {.buf_cfgval = 0}; + u8 channels; + + had_prog_status_reg(substream, intelhaddata); + + buf_cfg.buf_cfg_regx.fifo_width = FIFO_THRESHOLD; + buf_cfg.buf_cfg_regx.aud_delay = 0; + had_write_register(AUD_BUF_CONFIG, buf_cfg.buf_cfgval); + + channels = substream->runtime->channels; + + switch (channels) { + case 1: + case 2: + cfg_val.cfg_regx.num_ch = CH_STEREO; + cfg_val.cfg_regx.layout = LAYOUT0; + break; + + case 3: + case 4: + cfg_val.cfg_regx.num_ch = CH_THREE_FOUR; + cfg_val.cfg_regx.layout = LAYOUT1; + break; + + case 5: + case 6: + cfg_val.cfg_regx.num_ch = CH_FIVE_SIX; + cfg_val.cfg_regx.layout = LAYOUT1; + break; + + case 7: + case 8: + cfg_val.cfg_regx.num_ch = CH_SEVEN_EIGHT; + cfg_val.cfg_regx.layout = LAYOUT1; + break; + + } + + cfg_val.cfg_regx.val_bit = 1; + had_write_register(AUD_CONFIG, cfg_val.cfg_regval); + return 0; +} +/* + * Compute derived values in channel_allocations[]. + */ +static void init_channel_allocations(void) +{ + int i, j; + struct cea_channel_speaker_allocation *p; + + pr_debug("%s: Enter\n", __func__); + + for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) { + p = channel_allocations + i; + p->channels = 0; + p->spk_mask = 0; + for (j = 0; j < ARRAY_SIZE(p->speakers); j++) + if (p->speakers[j]) { + p->channels++; + p->spk_mask |= p->speakers[j]; + } + } +} + +/* + * The transformation takes two steps: + * + * eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask + * spk_mask => (channel_allocations[]) => ai->CA + * + * TODO: it could select the wrong CA from multiple candidates. +*/ +static int snd_intelhad_channel_allocation(struct snd_intelhad *intelhaddata, + int channels) +{ + int i; + int ca = 0; + int spk_mask = 0; + + /* + * CA defaults to 0 for basic stereo audio + */ + if (channels <= 2) + return 0; + + /* + * expand ELD's speaker allocation mask + * + * ELD tells the speaker mask in a compact(paired) form, + * expand ELD's notions to match the ones used by Audio InfoFrame. + */ + + for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) { + if (intelhaddata->eeld.speaker_allocation_block & (1 << i)) + spk_mask |= eld_speaker_allocation_bits[i]; + } + + /* search for the first working match in the CA table */ + for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) { + if (channels == channel_allocations[i].channels && + (spk_mask & channel_allocations[i].spk_mask) == + channel_allocations[i].spk_mask) { + ca = channel_allocations[i].ca_index; + break; + } + } + + pr_debug("HDMI: select CA 0x%x for %d\n", ca, channels); + + return ca; +} + +/* from speaker bit mask to ALSA API channel position */ +static int spk_to_chmap(int spk) +{ + struct channel_map_table *t = map_tables; + + for (; t->map; t++) { + if (t->spk_mask == spk) + return t->map; + } + return 0; +} + +void had_build_channel_allocation_map(struct snd_intelhad *intelhaddata) +{ + int i = 0, c = 0; + int spk_mask = 0; + struct snd_pcm_chmap_elem *chmap; + uint8_t eld_high, eld_high_mask = 0xF0; + uint8_t high_msb; + + chmap = kzalloc(sizeof(*chmap), GFP_KERNEL); + if (chmap == NULL) { + intelhaddata->chmap->chmap = NULL; + return; + } + + had_get_caps(HAD_GET_ELD, &intelhaddata->eeld); + + pr_debug("eeld.speaker_allocation_block = %x\n", + intelhaddata->eeld.speaker_allocation_block); + + /* WA: Fix the max channel supported to 8 */ + + /* + * Sink may support more than 8 channels, if eld_high has more than + * one bit set. SOC supports max 8 channels. + * Refer eld_speaker_allocation_bits, for sink speaker allocation + */ + + /* if 0x2F < eld < 0x4F fall back to 0x2f, else fall back to 0x4F */ + eld_high = intelhaddata->eeld.speaker_allocation_block & eld_high_mask; + if ((eld_high & (eld_high-1)) && (eld_high > 0x1F)) { + /* eld_high & (eld_high-1): if more than 1 bit set */ + /* 0x1F: 7 channels */ + for (i = 1; i < 4; i++) { + high_msb = eld_high & (0x80 >> i); + if (high_msb) { + intelhaddata->eeld.speaker_allocation_block &= + high_msb | 0xF; + break; + } + } + } + + for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) { + if (intelhaddata->eeld.speaker_allocation_block & (1 << i)) + spk_mask |= eld_speaker_allocation_bits[i]; + } + + for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) { + if (spk_mask == channel_allocations[i].spk_mask) { + for (c = 0; c < channel_allocations[i].channels; c++) { + chmap->map[c] = spk_to_chmap( + channel_allocations[i].speakers[ + (MAX_SPEAKERS - 1)-c]); + } + chmap->channels = channel_allocations[i].channels; + intelhaddata->chmap->chmap = chmap; + break; + } + } + if (i >= ARRAY_SIZE(channel_allocations)) { + intelhaddata->chmap->chmap = NULL; + kfree(chmap); + } +} + +/* + ** ALSA API channel-map control callbacks + **/ +static int had_chmap_ctl_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol); + struct snd_intelhad *intelhaddata = info->private_data; + + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) + return -ENODEV; + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = HAD_MAX_CHANNEL; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = SNDRV_CHMAP_LAST; + return 0; +} + +#ifndef USE_ALSA_DEFAULT_TLV +static int had_chmap_ctl_tlv(struct snd_kcontrol *kcontrol, int op_flag, + unsigned int size, unsigned int __user *tlv) +{ + struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol); + struct snd_intelhad *intelhaddata = info->private_data; + + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) + return -ENODEV; + + /* TODO: Fix for query channel map */ + return -EPERM; +} +#endif + +static int had_chmap_ctl_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol); + struct snd_intelhad *intelhaddata = info->private_data; + int i = 0; + const struct snd_pcm_chmap_elem *chmap; + + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) + return -ENODEV; + if (intelhaddata->chmap->chmap == NULL) + return -ENODATA; + chmap = intelhaddata->chmap->chmap; + for (i = 0; i < chmap->channels; i++) { + ucontrol->value.integer.value[i] = chmap->map[i]; + pr_debug("chmap->map[%d] = %d\n", i, chmap->map[i]); + } + + return 0; +} + +static int had_chmap_ctl_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + /* TODO: Get channel map and set swap register */ + return -EPERM; +} + +static int had_register_chmap_ctls(struct snd_intelhad *intelhaddata, + struct snd_pcm *pcm) +{ + int err = 0; + + err = snd_pcm_add_chmap_ctls(pcm, SNDRV_PCM_STREAM_PLAYBACK, + NULL, 0, (unsigned long)intelhaddata, + &intelhaddata->chmap); + if (err < 0) + return err; + + intelhaddata->chmap->private_data = intelhaddata; + intelhaddata->kctl = intelhaddata->chmap->kctl; + intelhaddata->kctl->info = had_chmap_ctl_info; + intelhaddata->kctl->get = had_chmap_ctl_get; + intelhaddata->kctl->put = had_chmap_ctl_put; +#ifndef USE_ALSA_DEFAULT_TLV + intelhaddata->kctl->tlv.c = had_chmap_ctl_tlv; +#endif + intelhaddata->chmap->chmap = NULL; + return 0; +} + +/** + * snd_intelhad_prog_dip_v1 - to initialize Data Island Packets registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function is called in the prepare callback + */ +static void snd_intelhad_prog_dip_v1(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + int i; + union aud_ctrl_st ctrl_state = {.ctrl_val = 0}; + union aud_info_frame2 frame2 = {.fr2_val = 0}; + union aud_info_frame3 frame3 = {.fr3_val = 0}; + u8 checksum = 0; + int channels; + + channels = substream->runtime->channels; + + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); + + frame2.fr2_regx.chnl_cnt = substream->runtime->channels - 1; + + frame3.fr3_regx.chnl_alloc = snd_intelhad_channel_allocation( + intelhaddata, channels); + + /*Calculte the byte wide checksum for all valid DIP words*/ + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (INFO_FRAME_WORD1 >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame2.fr2_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame3.fr3_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + + frame2.fr2_regx.chksum = -(checksum); + + had_write_register(AUD_HDMIW_INFOFR, INFO_FRAME_WORD1); + had_write_register(AUD_HDMIW_INFOFR, frame2.fr2_val); + had_write_register(AUD_HDMIW_INFOFR, frame3.fr3_val); + + /* program remaining DIP words with zero */ + for (i = 0; i < HAD_MAX_DIP_WORDS-VALID_DIP_WORDS; i++) + had_write_register(AUD_HDMIW_INFOFR, 0x0); + + ctrl_state.ctrl_regx.dip_freq = 1; + ctrl_state.ctrl_regx.dip_en_sta = 1; + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); +} + +/** + * snd_intelhad_prog_dip_v2 - to initialize Data Island Packets registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function is called in the prepare callback + */ +static void snd_intelhad_prog_dip_v2(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata) +{ + int i; + union aud_ctrl_st ctrl_state = {.ctrl_val = 0}; + union aud_info_frame2 frame2 = {.fr2_val = 0}; + union aud_info_frame3 frame3 = {.fr3_val = 0}; + u8 checksum = 0; + int channels; + + channels = substream->runtime->channels; + + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); + + frame2.fr2_regx.chnl_cnt = substream->runtime->channels - 1; + + frame3.fr3_regx.chnl_alloc = snd_intelhad_channel_allocation( + intelhaddata, channels); + + /*Calculte the byte wide checksum for all valid DIP words*/ + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (INFO_FRAME_WORD1 >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame2.fr2_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + for (i = 0; i < BYTES_PER_WORD; i++) + checksum += (frame3.fr3_val >> i*BITS_PER_BYTE) & MASK_BYTE0; + + frame2.fr2_regx.chksum = -(checksum); + + had_write_register(AUD_HDMIW_INFOFR_v2, INFO_FRAME_WORD1); + had_write_register(AUD_HDMIW_INFOFR_v2, frame2.fr2_val); + had_write_register(AUD_HDMIW_INFOFR_v2, frame3.fr3_val); + + /* program remaining DIP words with zero */ + for (i = 0; i < HAD_MAX_DIP_WORDS-VALID_DIP_WORDS; i++) + had_write_register(AUD_HDMIW_INFOFR_v2, 0x0); + + ctrl_state.ctrl_regx.dip_freq = 1; + ctrl_state.ctrl_regx.dip_en_sta = 1; + had_write_register(AUD_CNTL_ST, ctrl_state.ctrl_val); +} + +/** + * snd_intelhad_prog_buffer - programs buffer + * address and length registers + * + * @substream:substream for which the prepare function is called + * @intelhaddata:substream private data + * + * This function programs ring buffer address and length into registers. + */ +int snd_intelhad_prog_buffer(struct snd_intelhad *intelhaddata, + int start, int end) +{ + u32 ring_buf_addr, ring_buf_size, period_bytes; + u8 i, num_periods; + struct snd_pcm_substream *substream; + + substream = intelhaddata->stream_info.had_substream; + if (!substream) { + pr_err("substream is NULL\n"); + dump_stack(); + return 0; + } + + ring_buf_addr = substream->runtime->dma_addr; + ring_buf_size = snd_pcm_lib_buffer_bytes(substream); + intelhaddata->stream_info.ring_buf_size = ring_buf_size; + period_bytes = frames_to_bytes(substream->runtime, + substream->runtime->period_size); + num_periods = substream->runtime->periods; + + /* + * buffer addr should be 64 byte aligned, period bytes + * will be used to calculate addr offset + */ + period_bytes &= ~0x3F; + + /* Hardware supports MAX_PERIODS buffers */ + if (end >= HAD_MAX_PERIODS) + return -EINVAL; + + for (i = start; i <= end; i++) { + /* Program the buf registers with addr and len */ + intelhaddata->buf_info[i].buf_addr = ring_buf_addr + + (i * period_bytes); + if (i < num_periods-1) + intelhaddata->buf_info[i].buf_size = period_bytes; + else + intelhaddata->buf_info[i].buf_size = ring_buf_size - + (period_bytes*i); + + had_write_register(AUD_BUF_A_ADDR + (i * HAD_REG_WIDTH), + intelhaddata->buf_info[i].buf_addr | + BIT(0) | BIT(1)); + had_write_register(AUD_BUF_A_LENGTH + (i * HAD_REG_WIDTH), + period_bytes); + intelhaddata->buf_info[i].is_valid = true; + } + pr_debug("%s:buf[%d-%d] addr=%#x and size=%d\n", __func__, start, end, + intelhaddata->buf_info[start].buf_addr, + intelhaddata->buf_info[start].buf_size); + intelhaddata->valid_buf_cnt = num_periods; + return 0; +} + +inline int snd_intelhad_read_len(struct snd_intelhad *intelhaddata) +{ + int i, retval = 0; + u32 len[4]; + + for (i = 0; i < 4 ; i++) { + had_read_register(AUD_BUF_A_LENGTH + (i * HAD_REG_WIDTH), + &len[i]); + if (!len[i]) + retval++; + } + if (retval != 1) { + for (i = 0; i < 4 ; i++) + pr_debug("buf[%d] size=%d\n", i, len[i]); + } + + return retval; +} + +/** + * snd_intelhad_prog_cts_v1 - Program HDMI audio CTS value + * + * @aud_samp_freq: sampling frequency of audio data + * @tmds: sampling frequency of the display data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * Program CTS register based on the audio and display sampling frequency + */ +static void snd_intelhad_prog_cts_v1(u32 aud_samp_freq, u32 tmds, u32 n_param, + struct snd_intelhad *intelhaddata) +{ + u32 cts_val; + u64 dividend, divisor; + + /* Calculate CTS according to HDMI 1.3a spec*/ + dividend = (u64)tmds * n_param*1000; + divisor = 128 * aud_samp_freq; + cts_val = div64_u64(dividend, divisor); + pr_debug("TMDS value=%d, N value=%d, CTS Value=%d\n", + tmds, n_param, cts_val); + had_write_register(AUD_HDMI_CTS, (BIT(20) | cts_val)); +} + +/** + * snd_intelhad_prog_cts_v2 - Program HDMI audio CTS value + * + * @aud_samp_freq: sampling frequency of audio data + * @tmds: sampling frequency of the display data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * Program CTS register based on the audio and display sampling frequency + */ +static void snd_intelhad_prog_cts_v2(u32 aud_samp_freq, u32 tmds, u32 n_param, + struct snd_intelhad *intelhaddata) +{ + u32 cts_val; + u64 dividend, divisor; + + /* Calculate CTS according to HDMI 1.3a spec*/ + dividend = (u64)tmds * n_param*1000; + divisor = 128 * aud_samp_freq; + cts_val = div64_u64(dividend, divisor); + pr_debug("TMDS value=%d, N value=%d, CTS Value=%d\n", + tmds, n_param, cts_val); + had_write_register(AUD_HDMI_CTS, (BIT(24) | cts_val)); +} + +static int had_calculate_n_value(u32 aud_samp_freq) +{ + s32 n_val; + + /* Select N according to HDMI 1.3a spec*/ + switch (aud_samp_freq) { + case AUD_SAMPLE_RATE_32: + n_val = 4096; + break; + + case AUD_SAMPLE_RATE_44_1: + n_val = 6272; + break; + + case AUD_SAMPLE_RATE_48: + n_val = 6144; + break; + + case AUD_SAMPLE_RATE_88_2: + n_val = 12544; + break; + + case AUD_SAMPLE_RATE_96: + n_val = 12288; + break; + + case AUD_SAMPLE_RATE_176_4: + n_val = 25088; + break; + + case HAD_MAX_RATE: + n_val = 24576; + break; + + default: + n_val = -EINVAL; + break; + } + return n_val; +} + +/** + * snd_intelhad_prog_n_v1 - Program HDMI audio N value + * + * @aud_samp_freq: sampling frequency of audio data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * This function is called in the prepare callback. + * It programs based on the audio and display sampling frequency + */ +static int snd_intelhad_prog_n_v1(u32 aud_samp_freq, u32 *n_param, + struct snd_intelhad *intelhaddata) +{ + s32 n_val; + + n_val = had_calculate_n_value(aud_samp_freq); + + if (n_val < 0) + return n_val; + + had_write_register(AUD_N_ENABLE, (BIT(20) | n_val)); + *n_param = n_val; + return 0; +} + +/** + * snd_intelhad_prog_n_v2 - Program HDMI audio N value + * + * @aud_samp_freq: sampling frequency of audio data + * @n_param: N value, depends on aud_samp_freq + * @intelhaddata:substream private data + * + * This function is called in the prepare callback. + * It programs based on the audio and display sampling frequency + */ +static int snd_intelhad_prog_n_v2(u32 aud_samp_freq, u32 *n_param, + struct snd_intelhad *intelhaddata) +{ + s32 n_val; + + n_val = had_calculate_n_value(aud_samp_freq); + + if (n_val < 0) + return n_val; + + had_write_register(AUD_N_ENABLE, (BIT(24) | n_val)); + *n_param = n_val; + return 0; +} + +static void had_clear_underrun_intr_v1(struct snd_intelhad *intelhaddata) +{ + u32 hdmi_status, i = 0; + + /* Handle Underrun interrupt within Audio Unit */ + had_write_register(AUD_CONFIG, 0); + /* Reset buffer pointers */ + had_write_register(AUD_HDMI_STATUS, 1); + had_write_register(AUD_HDMI_STATUS, 0); + /** + * The interrupt status 'sticky' bits might not be cleared by + * setting '1' to that bit once... + */ + do { /* clear bit30, 31 AUD_HDMI_STATUS */ + had_read_register(AUD_HDMI_STATUS, &hdmi_status); + pr_debug("HDMI status =0x%x\n", hdmi_status); + if (hdmi_status & AUD_CONFIG_MASK_UNDERRUN) { + i++; + hdmi_status &= (AUD_CONFIG_MASK_SRDBG | + AUD_CONFIG_MASK_FUNCRST); + hdmi_status |= ~AUD_CONFIG_MASK_UNDERRUN; + had_write_register(AUD_HDMI_STATUS, hdmi_status); + } else + break; + } while (i < MAX_CNT); + if (i >= MAX_CNT) + pr_err("Unable to clear UNDERRUN bits\n"); +} + +static void had_clear_underrun_intr_v2(struct snd_intelhad *intelhaddata) +{ + u32 hdmi_status, i = 0; + + /* Handle Underrun interrupt within Audio Unit */ + had_write_register(AUD_CONFIG, 0); + /* Reset buffer pointers */ + had_write_register(AUD_HDMI_STATUS_v2, 1); + had_write_register(AUD_HDMI_STATUS_v2, 0); + /** + * The interrupt status 'sticky' bits might not be cleared by + * setting '1' to that bit once... + */ + do { /* clear bit30, 31 AUD_HDMI_STATUS */ + had_read_register(AUD_HDMI_STATUS_v2, &hdmi_status); + pr_debug("HDMI status =0x%x\n", hdmi_status); + if (hdmi_status & AUD_CONFIG_MASK_UNDERRUN) { + i++; + had_write_register(AUD_HDMI_STATUS_v2, hdmi_status); + } else + break; + } while (i < MAX_CNT); + if (i >= MAX_CNT) + pr_err("Unable to clear UNDERRUN bits\n"); +} + +/** +* snd_intelhad_open - stream initializations are done here +* @substream:substream for which the stream function is called +* +* This function is called whenever a PCM stream is opened +*/ +static int snd_intelhad_open(struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata; + struct snd_pcm_runtime *runtime; + struct had_stream_pvt *stream; + struct had_pvt_data *had_stream; + int retval; + + pr_debug("snd_intelhad_open called\n"); + intelhaddata = snd_pcm_substream_chip(substream); + had_stream = intelhaddata->private_data; + runtime = substream->runtime; + + pm_runtime_get(intelhaddata->dev); + + if (had_get_hwstate(intelhaddata)) { + pr_err("%s: HDMI cable plugged-out\n", __func__); + retval = -ENODEV; + goto exit_put_handle; + } + + /* Check, if device already in use */ + if (runtime->private_data) { + pr_err("Device already in use\n"); + retval = -EBUSY; + goto exit_put_handle; + } + + /* set the runtime hw parameter with local snd_pcm_hardware struct */ + runtime->hw = snd_intel_hadstream; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) { + retval = -ENOMEM; + goto exit_put_handle; + } + stream->stream_status = STREAM_INIT; + runtime->private_data = stream; + + retval = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (retval < 0) + goto exit_err; + + /* Make sure, that the period size is always aligned + * 64byte boundary + */ + retval = snd_pcm_hw_constraint_step(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64); + if (retval < 0) { + pr_err("%s:step_size=64 failed,err=%d\n", __func__, retval); + goto exit_err; + } + + return retval; +exit_err: + kfree(stream); +exit_put_handle: + pm_runtime_put(intelhaddata->dev); + runtime->private_data = NULL; + return retval; +} + +/** +* had_period_elapsed - updates the hardware pointer status +* @had_substream:substream for which the stream function is called +* +*/ +static void had_period_elapsed(void *had_substream) +{ + struct snd_pcm_substream *substream = had_substream; + struct had_stream_pvt *stream; + + /* pr_debug("had_period_elapsed called\n"); */ + + if (!substream || !substream->runtime) + return; + stream = substream->runtime->private_data; + if (!stream) + return; + + if (stream->stream_status != STREAM_RUNNING) + return; + snd_pcm_period_elapsed(substream); +} + +/** +* snd_intelhad_init_stream - internal function to initialize stream info +* @substream:substream for which the stream function is called +* +*/ +static int snd_intelhad_init_stream(struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata = snd_pcm_substream_chip(substream); + + pr_debug("snd_intelhad_init_stream called\n"); + + pr_debug("setting buffer ptr param\n"); + intelhaddata->stream_info.period_elapsed = had_period_elapsed; + intelhaddata->stream_info.had_substream = substream; + intelhaddata->stream_info.buffer_ptr = 0; + intelhaddata->stream_info.buffer_rendered = 0; + intelhaddata->stream_info.sfreq = substream->runtime->rate; + return 0; +} + +/** + * snd_intelhad_close- to free parameteres when stream is stopped + * + * @substream: substream for which the function is called + * + * This function is called by ALSA framework when stream is stopped + */ +static int snd_intelhad_close(struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata; + struct snd_pcm_runtime *runtime; + + pr_debug("snd_intelhad_close called\n"); + + intelhaddata = snd_pcm_substream_chip(substream); + runtime = substream->runtime; + + if (!runtime->private_data) { + pr_debug("close() might have called after failed open"); + return 0; + } + + intelhaddata->stream_info.buffer_rendered = 0; + intelhaddata->stream_info.buffer_ptr = 0; + intelhaddata->stream_info.str_id = 0; + intelhaddata->stream_info.had_substream = NULL; + + /* Check if following drv_status modification is required - VA */ + if (intelhaddata->drv_status != HAD_DRV_DISCONNECTED) { + intelhaddata->drv_status = HAD_DRV_CONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_CONNECTED\n", + __func__, __LINE__); + } + kfree(runtime->private_data); + runtime->private_data = NULL; + pm_runtime_put(intelhaddata->dev); + return 0; +} + +/** + * snd_intelhad_hw_params- to setup the hardware parameters + * like allocating the buffers + * + * @substream: substream for which the function is called + * @hw_params: hardware parameters + * + * This function is called by ALSA framework when hardware params are set + */ +static int snd_intelhad_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + unsigned long addr; + int pages, buf_size, retval; + + pr_debug("snd_intelhad_hw_params called\n"); + + if (!hw_params) + return -EINVAL; + + buf_size = params_buffer_bytes(hw_params); + retval = snd_pcm_lib_malloc_pages(substream, buf_size); + if (retval < 0) + return retval; + pr_debug("%s:allocated memory = %d\n", __func__, buf_size); + /* mark the pages as uncached region */ + addr = (unsigned long) substream->runtime->dma_area; + pages = (substream->runtime->dma_bytes + PAGE_SIZE - 1) / PAGE_SIZE; + retval = set_memory_uc(addr, pages); + if (retval) { + pr_err("set_memory_uc failed.Error:%d\n", retval); + return retval; + } + memset(substream->runtime->dma_area, 0, buf_size); + + return retval; +} + +/** + * snd_intelhad_hw_free- to release the resources allocated during + * hardware params setup + * + * @substream: substream for which the function is called + * + * This function is called by ALSA framework before close callback. + * + */ +static int snd_intelhad_hw_free(struct snd_pcm_substream *substream) +{ + unsigned long addr; + u32 pages; + + pr_debug("snd_intelhad_hw_free called\n"); + + /* mark back the pages as cached/writeback region before the free */ + if (substream->runtime->dma_area != NULL) { + addr = (unsigned long) substream->runtime->dma_area; + pages = (substream->runtime->dma_bytes + PAGE_SIZE - 1) / + PAGE_SIZE; + set_memory_wb(addr, pages); + return snd_pcm_lib_free_pages(substream); + } + return 0; +} + +/** +* snd_intelhad_pcm_trigger - stream activities are handled here +* @substream:substream for which the stream function is called +* @cmd:the stream commamd thats requested from upper layer +* This function is called whenever an a stream activity is invoked +*/ +static int snd_intelhad_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + int caps, retval = 0; + unsigned long flag_irq; + struct snd_intelhad *intelhaddata; + struct had_stream_pvt *stream; + struct had_pvt_data *had_stream; + + pr_debug("snd_intelhad_pcm_trigger called\n"); + + intelhaddata = snd_pcm_substream_chip(substream); + stream = substream->runtime->private_data; + had_stream = intelhaddata->private_data; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + pr_debug("Trigger Start\n"); + + /* Disable local INTRs till register prgmng is done */ + if (had_get_hwstate(intelhaddata)) { + pr_err("_START: HDMI cable plugged-out\n"); + retval = -ENODEV; + break; + } + stream->stream_status = STREAM_RUNNING; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irq); + had_stream->stream_type = HAD_RUNNING_STREAM; + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irq); + + /* Enable Audio */ + /* + * ToDo: Need to enable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + retval = had_set_caps(HAD_SET_ENABLE_AUDIO_INT, &caps); + retval = had_set_caps(HAD_SET_ENABLE_AUDIO, NULL); + intelhaddata->ops->enable_audio(substream, 1); + + pr_debug("Processed _Start\n"); + + break; + + case SNDRV_PCM_TRIGGER_STOP: + pr_debug("Trigger Stop\n"); + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irq); + intelhaddata->stream_info.str_id = 0; + intelhaddata->curr_buf = 0; + + /* Stop reporting BUFFER_DONE/UNDERRUN to above layers*/ + + had_stream->stream_type = HAD_INIT; + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irq); + /* Disable Audio */ + /* + * ToDo: Need to disable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + intelhaddata->ops->enable_audio(substream, 0); + /* Reset buffer pointers */ + intelhaddata->ops->reset_audio(1); + intelhaddata->ops->reset_audio(0); + stream->stream_status = STREAM_DROPPED; + had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + break; + + default: + retval = -EINVAL; + } + return retval; +} + +/** +* snd_intelhad_pcm_prepare- internal preparation before starting a stream +* +* @substream: substream for which the function is called +* +* This function is called when a stream is started for internal preparation. +*/ +static int snd_intelhad_pcm_prepare(struct snd_pcm_substream *substream) +{ + int retval; + u32 disp_samp_freq, n_param; + struct snd_intelhad *intelhaddata; + struct snd_pcm_runtime *runtime; + struct had_pvt_data *had_stream; + + pr_debug("snd_intelhad_pcm_prepare called\n"); + + intelhaddata = snd_pcm_substream_chip(substream); + runtime = substream->runtime; + had_stream = intelhaddata->private_data; + + if (had_get_hwstate(intelhaddata)) { + pr_err("%s: HDMI cable plugged-out\n", __func__); + snd_pcm_stop(substream, SNDRV_PCM_STATE_DISCONNECTED); + retval = -ENODEV; + goto prep_end; + } + + pr_debug("period_size=%d\n", + (int)frames_to_bytes(runtime, runtime->period_size)); + pr_debug("periods=%d\n", runtime->periods); + pr_debug("buffer_size=%d\n", (int)snd_pcm_lib_buffer_bytes(substream)); + pr_debug("rate=%d\n", runtime->rate); + pr_debug("channels=%d\n", runtime->channels); + + if (intelhaddata->stream_info.str_id) { + pr_debug("_prepare is called for existing str_id#%d\n", + intelhaddata->stream_info.str_id); + retval = snd_intelhad_pcm_trigger(substream, + SNDRV_PCM_TRIGGER_STOP); + return retval; + } + + retval = snd_intelhad_init_stream(substream); + if (retval) + goto prep_end; + + + /* Get N value in KHz */ + retval = had_get_caps(HAD_GET_DISPLAY_RATE, &disp_samp_freq); + if (retval) { + pr_err("querying display sampling freq failed %#x\n", retval); + goto prep_end; + } + + had_get_caps(HAD_GET_ELD, &intelhaddata->eeld); + + retval = intelhaddata->ops->prog_n(substream->runtime->rate, &n_param, + intelhaddata); + if (retval) { + pr_err("programming N value failed %#x\n", retval); + goto prep_end; + } + intelhaddata->ops->prog_cts(substream->runtime->rate, + disp_samp_freq, n_param, intelhaddata); + + intelhaddata->ops->prog_dip(substream, intelhaddata); + + retval = intelhaddata->ops->audio_ctrl(substream, intelhaddata); + + /* Prog buffer address */ + retval = snd_intelhad_prog_buffer(intelhaddata, + HAD_BUF_TYPE_A, HAD_BUF_TYPE_D); + + /* + * Program channel mapping in following order: + * FL, FR, C, LFE, RL, RR + */ + + had_write_register(AUD_BUF_CH_SWAP, SWAP_LFE_CENTER); + +prep_end: + return retval; +} + +/** + * snd_intelhad_pcm_pointer- to send the current buffer pointerprocessed by hw + * + * @substream: substream for which the function is called + * + * This function is called by ALSA framework to get the current hw buffer ptr + * when a period is elapsed + */ +static snd_pcm_uframes_t snd_intelhad_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_intelhad *intelhaddata; + u32 bytes_rendered = 0; + + /* pr_debug("snd_intelhad_pcm_pointer called\n"); */ + + intelhaddata = snd_pcm_substream_chip(substream); + + if (intelhaddata->flag_underrun) { + intelhaddata->flag_underrun = 0; + return SNDRV_PCM_POS_XRUN; + } + + if (intelhaddata->stream_info.buffer_rendered) + div_u64_rem(intelhaddata->stream_info.buffer_rendered, + intelhaddata->stream_info.ring_buf_size, + &(bytes_rendered)); + + intelhaddata->stream_info.buffer_ptr = bytes_to_frames( + substream->runtime, + bytes_rendered); + return intelhaddata->stream_info.buffer_ptr; +} + +/** +* snd_intelhad_pcm_mmap- mmaps a kernel buffer to user space for copying data +* +* @substream: substream for which the function is called +* @vma: struct instance of memory VMM memory area +* +* This function is called by OS when a user space component +* tries to get mmap memory from driver +*/ +static int snd_intelhad_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + + pr_debug("snd_intelhad_pcm_mmap called\n"); + + pr_debug("entry with prot:%s\n", __func__); + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +int hdmi_audio_mode_change(struct snd_pcm_substream *substream) +{ + int retval = 0; + u32 disp_samp_freq, n_param; + struct snd_intelhad *intelhaddata; + + intelhaddata = snd_pcm_substream_chip(substream); + + /* Disable Audio */ + intelhaddata->ops->enable_audio(substream, 0); + + /* Update CTS value */ + retval = had_get_caps(HAD_GET_DISPLAY_RATE, &disp_samp_freq); + if (retval) { + pr_err("querying display sampling freq failed %#x\n", retval); + goto out; + } + + retval = intelhaddata->ops->prog_n(substream->runtime->rate, &n_param, + intelhaddata); + if (retval) { + pr_err("programming N value failed %#x\n", retval); + goto out; + } + intelhaddata->ops->prog_cts(substream->runtime->rate, + disp_samp_freq, n_param, intelhaddata); + + /* Enable Audio */ + intelhaddata->ops->enable_audio(substream, 1); + +out: + return retval; +} + +/*PCM operations structure and the calls back for the same */ +struct snd_pcm_ops snd_intelhad_playback_ops = { + .open = snd_intelhad_open, + .close = snd_intelhad_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_intelhad_hw_params, + .hw_free = snd_intelhad_hw_free, + .prepare = snd_intelhad_pcm_prepare, + .trigger = snd_intelhad_pcm_trigger, + .pointer = snd_intelhad_pcm_pointer, + .mmap = snd_intelhad_pcm_mmap, +}; + +/** + * snd_intelhad_create - to crete alsa card instance + * + * @intelhaddata: pointer to internal context + * @card: pointer to card + * + * This function is called when the hdmi cable is plugged in + */ +static int snd_intelhad_create( + struct snd_intelhad *intelhaddata, + struct snd_card *card) +{ + int retval; + static struct snd_device_ops ops = { + }; + + pr_debug("snd_intelhad_create called\n"); + + if (!intelhaddata) + return -EINVAL; + + /* ALSA api to register the device */ + retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, intelhaddata, &ops); + return retval; +} +/** + * snd_intelhad_pcm_free - to free the memory allocated + * + * @pcm: pointer to pcm instance + * This function is called when the device is removed + */ +static void snd_intelhad_pcm_free(struct snd_pcm *pcm) +{ + pr_debug("Freeing PCM preallocated pages\n"); + snd_pcm_lib_preallocate_free_for_all(pcm); +} + +static int had_iec958_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + return 0; +} + +static int had_iec958_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_intelhad *intelhaddata = snd_kcontrol_chip(kcontrol); + + ucontrol->value.iec958.status[0] = (intelhaddata->aes_bits >> 0) & 0xff; + ucontrol->value.iec958.status[1] = (intelhaddata->aes_bits >> 8) & 0xff; + ucontrol->value.iec958.status[2] = + (intelhaddata->aes_bits >> 16) & 0xff; + ucontrol->value.iec958.status[3] = + (intelhaddata->aes_bits >> 24) & 0xff; + return 0; +} +static int had_iec958_mask_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.iec958.status[0] = 0xff; + ucontrol->value.iec958.status[1] = 0xff; + ucontrol->value.iec958.status[2] = 0xff; + ucontrol->value.iec958.status[3] = 0xff; + return 0; +} +static int had_iec958_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + unsigned int val; + struct snd_intelhad *intelhaddata = snd_kcontrol_chip(kcontrol); + + pr_debug("entered had_iec958_put\n"); + val = (ucontrol->value.iec958.status[0] << 0) | + (ucontrol->value.iec958.status[1] << 8) | + (ucontrol->value.iec958.status[2] << 16) | + (ucontrol->value.iec958.status[3] << 24); + if (intelhaddata->aes_bits != val) { + intelhaddata->aes_bits = val; + return 1; + } + return 1; +} + +static struct snd_kcontrol_new had_control_iec958_mask = { + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), + .info = had_iec958_info, /* shared */ + .get = had_iec958_mask_get, +}; + +static struct snd_kcontrol_new had_control_iec958 = { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .info = had_iec958_info, + .get = had_iec958_get, + .put = had_iec958_put +}; + +static struct snd_intel_had_interface had_interface = { + .name = "hdmi-audio", + .query = hdmi_audio_query, + .suspend = hdmi_audio_suspend, + .resume = hdmi_audio_resume, +}; + +static struct had_ops had_ops_v1 = { + .enable_audio = snd_intelhad_enable_audio_v1, + .reset_audio = snd_intelhad_reset_audio_v1, + .prog_n = snd_intelhad_prog_n_v1, + .prog_cts = snd_intelhad_prog_cts_v1, + .audio_ctrl = snd_intelhad_prog_audio_ctrl_v1, + .prog_dip = snd_intelhad_prog_dip_v1, + .handle_underrun = had_clear_underrun_intr_v1, +}; + +static struct had_ops had_ops_v2 = { + .enable_audio = snd_intelhad_enable_audio_v2, + .reset_audio = snd_intelhad_reset_audio_v2, + .prog_n = snd_intelhad_prog_n_v2, + .prog_cts = snd_intelhad_prog_cts_v2, + .audio_ctrl = snd_intelhad_prog_audio_ctrl_v2, + .prog_dip = snd_intelhad_prog_dip_v2, + .handle_underrun = had_clear_underrun_intr_v2, +}; +/** + * hdmi_audio_probe - to create sound card instance for HDMI audio playabck + * + *@haddata: pointer to HAD private data + *@card_id: card for which probe is called + * + * This function is called when the hdmi cable is plugged in. This function + * creates and registers the sound card with ALSA + */ +int hdmi_audio_probe(void *deviceptr) +{ + int retval; + struct snd_pcm *pcm; + struct snd_card *card; + struct had_callback_ops ops_cb; + struct snd_intelhad *intelhaddata; + struct had_pvt_data *had_stream; + struct platform_device *devptr = deviceptr; + + pr_debug("Enter %s\n", __func__); + + pr_debug("hdmi_audio_probe dma_mask: %p\n", devptr->dev.dma_mask); + + /* allocate memory for saving internal context and working */ + intelhaddata = kzalloc(sizeof(*intelhaddata), GFP_KERNEL); + if (!intelhaddata) + return -ENOMEM; + + had_stream = kzalloc(sizeof(*had_stream), GFP_KERNEL); + if (!had_stream) { + retval = -ENOMEM; + goto free_haddata; + } + + had_data = intelhaddata; + ops_cb.intel_had_event_call_back = had_event_handler; + + /* registering with display driver to get access to display APIs */ + + retval = mid_hdmi_audio_setup( + ops_cb.intel_had_event_call_back, + &(intelhaddata->reg_ops), + &(intelhaddata->query_ops)); + if (retval) { + pr_err("querying display driver APIs failed %#x\n", retval); + goto free_hadstream; + } + mutex_lock(&had_mutex); + spin_lock_init(&intelhaddata->had_spinlock); + intelhaddata->drv_status = HAD_DRV_DISCONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n", + __func__, __LINE__); + + /* create a card instance with ALSA framework */ + retval = snd_card_new(&devptr->dev, hdmi_card_index, hdmi_card_id, + THIS_MODULE, 0, &card); + + if (retval) + goto unlock_mutex; + intelhaddata->card = card; + intelhaddata->card_id = hdmi_card_id; + intelhaddata->card_index = card->number; + intelhaddata->private_data = had_stream; + intelhaddata->flag_underrun = 0; + intelhaddata->aes_bits = SNDRV_PCM_DEFAULT_CON_SPDIF; + strncpy(card->driver, INTEL_HAD, strlen(INTEL_HAD)); + strncpy(card->shortname, INTEL_HAD, strlen(INTEL_HAD)); + + retval = snd_pcm_new(card, INTEL_HAD, PCM_INDEX, MAX_PB_STREAMS, + MAX_CAP_STREAMS, &pcm); + if (retval) + goto err; + + /* setup private data which can be retrieved when required */ + pcm->private_data = intelhaddata; + pcm->private_free = snd_intelhad_pcm_free; + pcm->info_flags = 0; + strncpy(pcm->name, card->shortname, strlen(card->shortname)); + /* setup the ops for palyabck */ + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, + &snd_intelhad_playback_ops); + /* allocate dma pages for ALSA stream operations + * memory allocated is based on size, not max value + * thus using same argument for max & size + */ + retval = snd_pcm_lib_preallocate_pages_for_all(pcm, + SNDRV_DMA_TYPE_DEV, NULL, + HAD_MAX_BUFFER, HAD_MAX_BUFFER); + + if (card->dev == NULL) + pr_debug("card->dev is NULL!!!!! Should not be this case\n"); + else if (card->dev->dma_mask == NULL) + pr_debug("hdmi_audio_probe dma_mask is NULL!!!!!\n"); + else + pr_debug("hdmi_audio_probe dma_mask is : %p\n", + card->dev->dma_mask); + + if (retval) + goto err; + + /* internal function call to register device with ALSA */ + retval = snd_intelhad_create(intelhaddata, card); + if (retval) + goto err; + + card->private_data = &intelhaddata; + retval = snd_card_register(card); + if (retval) + goto err; + + /* IEC958 controls */ + retval = snd_ctl_add(card, snd_ctl_new1(&had_control_iec958_mask, + intelhaddata)); + if (retval < 0) + goto err; + retval = snd_ctl_add(card, snd_ctl_new1(&had_control_iec958, + intelhaddata)); + if (retval < 0) + goto err; + + init_channel_allocations(); + + /* Register channel map controls */ + retval = had_register_chmap_ctls(intelhaddata, pcm); + if (retval < 0) + goto err; + + intelhaddata->dev = &devptr->dev; + pm_runtime_set_active(intelhaddata->dev); + pm_runtime_enable(intelhaddata->dev); + + mutex_unlock(&had_mutex); + retval = mid_hdmi_audio_register(&had_interface, intelhaddata); + if (retval) { + pr_err("registering with display driver failed %#x\n", retval); + snd_card_free(card); + goto free_hadstream; + } + + intelhaddata->hw_silence = 1; + had_ops_v1 = had_ops_v1; /* unused */ + intelhaddata->ops = &had_ops_v2; + + return retval; +err: + snd_card_free(card); +unlock_mutex: + mutex_unlock(&had_mutex); +free_hadstream: + kfree(had_stream); + pm_runtime_disable(intelhaddata->dev); + intelhaddata->dev = NULL; +free_haddata: + kfree(intelhaddata); + intelhaddata = NULL; + pr_err("Error returned from %s api %#x\n", __func__, retval); + return retval; +} + +/** + * hdmi_audio_remove - removes the alsa card + * + *@haddata: pointer to HAD private data + * + * This function is called when the hdmi cable is un-plugged. This function + * free the sound card. + */ +int hdmi_audio_remove(void *pdevptr) +{ + struct snd_intelhad *intelhaddata = had_data; + int caps; + + pr_debug("Enter %s\n", __func__); + + if (!intelhaddata) + return 0; + + if (intelhaddata->drv_status != HAD_DRV_DISCONNECTED) { + caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + } + snd_card_free(intelhaddata->card); + kfree(intelhaddata->private_data); + kfree(intelhaddata); + return 0; +} + +MODULE_AUTHOR("Sailaja Bandarupalli <sailaja.bandarupalli(a)intel.com>"); +MODULE_AUTHOR("Ramesh Babu K V <ramesh.babu(a)intel.com>"); +MODULE_AUTHOR("Vaibhav Agarwal <vaibhav.agarwal(a)intel.com>"); +MODULE_AUTHOR("Jerome Anand <jerome.anand(a)intel.com>"); +MODULE_DESCRIPTION("Intel HDMI Audio driver"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{Intel,Intel_HAD}"); +MODULE_VERSION(HAD_DRIVER_VERSION); diff --git a/sound/x86/intel_hdmi_audio.h b/sound/x86/intel_hdmi_audio.h new file mode 100644 index 0000000..1ef25b6 --- /dev/null +++ b/sound/x86/intel_hdmi_audio.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2016 Intel Corporation + * Authors: Sailaja Bandarupalli <sailaja.bandarupalli(a)intel.com> + * Ramesh Babu K V <ramesh.babu(a)intel.com> + * Vaibhav Agarwal <vaibhav.agarwal(a)intel.com> + * Jerome Anand <jerome.anand(a)intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files + * (the "Software"), to deal in the Software without restriction, + * including without limitation the rights to use, copy, modify, merge, + * publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial + * portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _INTEL_HDMI_AUDIO_H_ +#define _INTEL_HDMI_AUDIO_H_ + +#include <linux/types.h> +#include <sound/initval.h> +#include <linux/version.h> +#include <linux/pm_runtime.h> +#include <sound/asoundef.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include "intel_hdmi_lpe_audio.h" + +#define PCM_INDEX 0 +#define MAX_PB_STREAMS 1 +#define MAX_CAP_STREAMS 0 +#define HDMI_AUDIO_DRIVER "hdmi-audio" + +#define INFO_FRAME_WORD1 0x000a0184 +#define FIFO_THRESHOLD 0xFE +#define DMA_FIFO_THRESHOLD 0x7 +#define BYTES_PER_WORD 0x4 + +/* Sampling rate as per IEC60958 Ver 3 */ +#define CH_STATUS_MAP_32KHZ 0x3 +#define CH_STATUS_MAP_44KHZ 0x0 +#define CH_STATUS_MAP_48KHZ 0x2 +#define CH_STATUS_MAP_88KHZ 0x8 +#define CH_STATUS_MAP_96KHZ 0xA +#define CH_STATUS_MAP_176KHZ 0xC +#define CH_STATUS_MAP_192KHZ 0xE + +#define MAX_SMPL_WIDTH_20 0x0 +#define MAX_SMPL_WIDTH_24 0x1 +#define SMPL_WIDTH_16BITS 0x1 +#define SMPL_WIDTH_24BITS 0x5 +#define CHANNEL_ALLOCATION 0x1F +#define MASK_BYTE0 0x000000FF +#define VALID_DIP_WORDS 3 +#define LAYOUT0 0 +#define LAYOUT1 1 +#define SWAP_LFE_CENTER 0x00fac4c8 +#define AUD_CONFIG_CH_MASK_V2 0x70 + +struct pcm_stream_info { + int str_id; + void *had_substream; + void (*period_elapsed)(void *had_substream); + u32 buffer_ptr; + u64 buffer_rendered; + u32 ring_buf_size; + int sfreq; +}; + +struct ring_buf_info { + uint32_t buf_addr; + uint32_t buf_size; + uint8_t is_valid; +}; + +struct had_stream_pvt { + enum had_stream_status stream_status; + int stream_ops; + ssize_t dbg_cum_bytes; +}; + +struct had_pvt_data { + enum had_status_stream stream_type; +}; + +struct had_callback_ops { + had_event_call_back intel_had_event_call_back; +}; + +/** + * struct snd_intelhad - intelhad driver structure + * + * @card: ptr to hold card details + * @card_index: sound card index + * @card_id: detected sound card id + * @reg_ops: register operations to program registers + * @query_ops: caps call backs for get/set operations + * @drv_status: driver status + * @buf_info: ring buffer info + * @stream_info: stream information + * @eeld: holds EELD info + * @curr_buf: pointer to hold current active ring buf + * @valid_buf_cnt: ring buffer count for stream + * @had_spinlock: driver lock + * @aes_bits: IEC958 status bits + * @buff_done: id of current buffer done intr + * @dev: platoform device handle + * @kctl: holds kctl ptrs used for channel map + * @chmap: holds channel map info + * @audio_reg_base: hdmi audio register base offset + * @hw_silence: flag indicates SoC support for HW silence/Keep alive + * @ops: holds ops functions based on platform + */ +struct snd_intelhad { + struct snd_card *card; + int card_index; + char *card_id; + struct hdmi_audio_registers_ops reg_ops; + struct hdmi_audio_query_set_ops query_ops; + enum had_drv_status drv_status; + struct ring_buf_info buf_info[HAD_NUM_OF_RING_BUFS]; + struct pcm_stream_info stream_info; + union otm_hdmi_eld_t eeld; + enum intel_had_aud_buf_type curr_buf; + int valid_buf_cnt; + unsigned int aes_bits; + int flag_underrun; + struct had_pvt_data *private_data; + spinlock_t had_spinlock; + enum intel_had_aud_buf_type buff_done; + struct device *dev; + struct snd_kcontrol *kctl; + struct snd_pcm_chmap *chmap; + unsigned int *audio_reg_base; + unsigned int audio_cfg_offset; + bool hw_silence; + struct had_ops *ops; +}; + +struct had_ops { + void (*enable_audio)(struct snd_pcm_substream *substream, + u8 enable); + void (*reset_audio)(u8 reset); + int (*prog_n)(u32 aud_samp_freq, u32 *n_param, + struct snd_intelhad *intelhaddata); + void (*prog_cts)(u32 aud_samp_freq, u32 tmds, u32 n_param, + struct snd_intelhad *intelhaddata); + int (*audio_ctrl)(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata); + void (*prog_dip)(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata); + void (*handle_underrun)(struct snd_intelhad *intelhaddata); +}; + + +int had_event_handler(enum had_event_type event_type, void *data); + +int hdmi_audio_query(void *drv_data, struct hdmi_audio_event event); +int hdmi_audio_suspend(void *drv_data, struct hdmi_audio_event event); +int hdmi_audio_resume(void *drv_data); +int hdmi_audio_mode_change(struct snd_pcm_substream *substream); +extern struct snd_pcm_ops snd_intelhad_playback_ops; + +int snd_intelhad_init_audio_ctrl(struct snd_pcm_substream *substream, + struct snd_intelhad *intelhaddata, + int flag_silence); +int snd_intelhad_prog_buffer(struct snd_intelhad *intelhaddata, + int start, int end); +int snd_intelhad_invd_buffer(int start, int end); +inline int snd_intelhad_read_len(struct snd_intelhad *intelhaddata); +void had_build_channel_allocation_map(struct snd_intelhad *intelhaddata); + +/* Register access functions */ +inline int had_get_hwstate(struct snd_intelhad *intelhaddata); +inline int had_get_caps(enum had_caps_list query_element, + void *capabilties); +inline int had_set_caps(enum had_caps_list set_element, + void *capabilties); +inline int had_read_register(uint32_t reg_addr, uint32_t *data); +inline int had_write_register(uint32_t reg_addr, uint32_t data); +inline int had_read_modify(uint32_t reg_addr, uint32_t data, + uint32_t mask); + +/**/ +int hdmi_audio_probe(void *devptr); +int hdmi_audio_remove(void *pdev); + +#endif /* _INTEL_HDMI_AUDIO_ */ diff --git a/sound/x86/intel_hdmi_audio_if.c b/sound/x86/intel_hdmi_audio_if.c new file mode 100644 index 0000000..c650ba4 --- /dev/null +++ b/sound/x86/intel_hdmi_audio_if.c @@ -0,0 +1,551 @@ +/* + * intel_hdmi_audio_if.c - Intel HDMI audio driver for MID + * + * Copyright (C) 2016 Intel Corp + * Authors: Sailaja Bandarupalli <sailaja.bandarupalli(a)intel.com> + * Ramesh Babu K V <ramesh.babu(a)intel.com> + * Vaibhav Agarwal <vaibhav.agarwal(a)intel.com> + * Jerome Anand <jerome.anand(a)intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * ALSA driver for Intel MID HDMI audio controller. This file contains + * interface functions exposed to HDMI Display driver and code to register + * with ALSA framework.. + */ + +#define pr_fmt(fmt) "had: " fmt + +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/slab.h> +#include <sound/pcm.h> +#include <sound/core.h> +#include "intel_hdmi_audio.h" +#include "intel_hdmi_lpe_audio.h" + +/** + * hdmi_audio_query - hdmi audio query function + * + *@haddata: pointer to HAD private data + *@event: audio event for which this method is invoked + * + * This function is called by client driver to query the + * hdmi audio. + */ +int hdmi_audio_query(void *haddata, struct hdmi_audio_event event) +{ + struct snd_pcm_substream *substream = NULL; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata; + + if (intelhaddata->stream_info.had_substream) + substream = intelhaddata->stream_info.had_substream; + had_stream = intelhaddata->private_data; + switch (event.type) { + case HAD_EVENT_QUERY_IS_AUDIO_BUSY: + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + + if ((had_stream->stream_type == HAD_RUNNING_STREAM) || + substream) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, + flag_irqs); + pr_debug("Audio stream active\n"); + return -EBUSY; + } + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + break; + + case HAD_EVENT_QUERY_IS_AUDIO_SUSPENDED: + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_SUSPENDED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, + flag_irqs); + pr_debug("Audio is suspended\n"); + return 1; + } + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + break; + + default: + pr_debug("error un-handled event !!\n"); + return -EINVAL; + break; + + } + + return 0; +} + +/** + * hdmi_audio_suspend - power management suspend function + * + *@haddata: pointer to HAD private data + *@event: pm event for which this method is invoked + * + * This function is called by client driver to suspend the + * hdmi audio. + */ +int hdmi_audio_suspend(void *haddata, struct hdmi_audio_event event) +{ + int caps, retval = 0; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + struct snd_pcm_substream *substream; + struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata; + + pr_debug("Enter:%s\n", __func__); + + had_stream = intelhaddata->private_data; + substream = intelhaddata->stream_info.had_substream; + + if (intelhaddata->dev->power.runtime_status != RPM_SUSPENDED) { + pr_err("audio stream is active\n"); + return -EAGAIN; + } + + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("had not connected\n"); + return retval; + } + + if (intelhaddata->drv_status == HAD_DRV_SUSPENDED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("had already suspended\n"); + return retval; + } + + intelhaddata->drv_status = HAD_DRV_SUSPENDED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_SUSPENDED\n", + __func__, __LINE__); + + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + /* + * ToDo: Need to disable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + pr_debug("Exit:%s", __func__); + return retval; +} + +/** + * hdmi_audio_resume - power management resume function + * + *@haddata: pointer to HAD private data + * + * This function is called by client driver to resume the + * hdmi audio. + */ +int hdmi_audio_resume(void *haddata) +{ + int caps, retval = 0; + struct snd_intelhad *intelhaddata = (struct snd_intelhad *)haddata; + unsigned long flag_irqs; + + pr_debug("Enter:%s\n", __func__); + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("had not connected\n"); + return 0; + } + + if (intelhaddata->drv_status != HAD_DRV_SUSPENDED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_err("had is not in suspended state\n"); + return 0; + } + + if (had_get_hwstate(intelhaddata)) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_err("Failed to resume. Device not accessible\n"); + return -ENODEV; + } + + intelhaddata->drv_status = HAD_DRV_CONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n", + __func__, __LINE__); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + /* + * ToDo: Need to enable UNDERRUN interrupts as well + * caps = HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE; + */ + caps = HDMI_AUDIO_BUFFER_DONE; + retval = had_set_caps(HAD_SET_ENABLE_AUDIO_INT, &caps); + retval = had_set_caps(HAD_SET_ENABLE_AUDIO, NULL); + pr_debug("Exit:%s", __func__); + return retval; +} + +static inline int had_chk_intrmiss(struct snd_intelhad *intelhaddata, + enum intel_had_aud_buf_type buf_id) +{ + int i, intr_count = 0; + enum intel_had_aud_buf_type buff_done; + u32 buf_size, buf_addr; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + had_stream = intelhaddata->private_data; + + buff_done = buf_id; + + intr_count = snd_intelhad_read_len(intelhaddata); + if (intr_count > 1) { + /* In case of active playback */ + pr_err("Driver detected %d missed buffer done interrupt(s)!!!!\n", + (intr_count - 1)); + if (intr_count > 3) + return intr_count; + + buf_id += (intr_count - 1); + /* Reprogram registers*/ + for (i = buff_done; i < buf_id; i++) { + int j = i % 4; + + buf_size = intelhaddata->buf_info[j].buf_size; + buf_addr = intelhaddata->buf_info[j].buf_addr; + had_write_register(AUD_BUF_A_LENGTH + + (j * HAD_REG_WIDTH), buf_size); + had_write_register( + AUD_BUF_A_ADDR+(j * HAD_REG_WIDTH), + (buf_addr | BIT(0) | BIT(1))); + } + buf_id = buf_id % 4; + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + intelhaddata->buff_done = buf_id; + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + } + + return intr_count; +} + +int had_process_buffer_done(struct snd_intelhad *intelhaddata) +{ + int retval = 0; + u32 len = 1; + enum intel_had_aud_buf_type buf_id; + enum intel_had_aud_buf_type buff_done; + struct pcm_stream_info *stream; + u32 buf_size; + struct had_pvt_data *had_stream; + int intr_count; + enum had_status_stream stream_type; + unsigned long flag_irqs; + + had_stream = intelhaddata->private_data; + stream = &intelhaddata->stream_info; + intr_count = 1; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_err("%s:Device already disconnected\n", __func__); + return retval; + } + buf_id = intelhaddata->curr_buf; + intelhaddata->buff_done = buf_id; + buff_done = intelhaddata->buff_done; + buf_size = intelhaddata->buf_info[buf_id].buf_size; + stream_type = had_stream->stream_type; + + pr_debug("Enter:%s buf_id=%d\n", __func__, buf_id); + + /* Every debug statement has an implication + * of ~5msec. Thus, avoid having >3 debug statements + * for each buffer_done handling. + */ + + /* Check for any intr_miss in case of active playback */ + if (had_stream->stream_type == HAD_RUNNING_STREAM) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + intr_count = had_chk_intrmiss(intelhaddata, buf_id); + if (!intr_count || (intr_count > 3)) { + pr_err("HAD SW state in non-recoverable!!! mode\n"); + pr_err("Already played stale data\n"); + return retval; + } + buf_id += (intr_count - 1); + buf_id = buf_id % 4; + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + } + + intelhaddata->buf_info[buf_id].is_valid = true; + if (intelhaddata->valid_buf_cnt-1 == buf_id) { + if (had_stream->stream_type >= HAD_RUNNING_STREAM) + intelhaddata->curr_buf = HAD_BUF_TYPE_A; + } else + intelhaddata->curr_buf = buf_id + 1; + + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + + if (had_get_hwstate(intelhaddata)) { + pr_err("HDMI cable plugged-out\n"); + return retval; + } + + /*Reprogram the registers with addr and length*/ + had_write_register(AUD_BUF_A_LENGTH + + (buf_id * HAD_REG_WIDTH), buf_size); + had_write_register(AUD_BUF_A_ADDR+(buf_id * HAD_REG_WIDTH), + intelhaddata->buf_info[buf_id].buf_addr| + BIT(0) | BIT(1)); + + had_read_register(AUD_BUF_A_LENGTH + (buf_id * HAD_REG_WIDTH), + &len); + pr_debug("%s:Enabled buf[%d]\n", __func__, buf_id); + + /* In case of actual data, + * report buffer_done to above ALSA layer + */ + buf_size = intelhaddata->buf_info[buf_id].buf_size; + if (stream_type >= HAD_RUNNING_STREAM) { + intelhaddata->stream_info.buffer_rendered += + (intr_count * buf_size); + stream->period_elapsed(stream->had_substream); + } + + return retval; +} + +int had_process_buffer_underrun(struct snd_intelhad *intelhaddata) +{ + int retval = 0; + enum intel_had_aud_buf_type buf_id; + struct pcm_stream_info *stream; + struct had_pvt_data *had_stream; + enum had_status_stream stream_type; + unsigned long flag_irqs; + int drv_status; + + had_stream = intelhaddata->private_data; + stream = &intelhaddata->stream_info; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + buf_id = intelhaddata->curr_buf; + stream_type = had_stream->stream_type; + intelhaddata->buff_done = buf_id; + drv_status = intelhaddata->drv_status; + if (stream_type == HAD_RUNNING_STREAM) + intelhaddata->curr_buf = HAD_BUF_TYPE_A; + + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + + pr_debug("Enter:%s buf_id=%d, stream_type=%d\n", + __func__, buf_id, stream_type); + + intelhaddata->ops->handle_underrun(intelhaddata); + + if (drv_status == HAD_DRV_DISCONNECTED) { + pr_err("%s:Device already disconnected\n", __func__); + return retval; + } + + if (stream_type == HAD_RUNNING_STREAM) { + /* Report UNDERRUN error to above layers */ + intelhaddata->flag_underrun = 1; + stream->period_elapsed(stream->had_substream); + } + + return retval; +} + +int had_process_hot_plug(struct snd_intelhad *intelhaddata) +{ + int retval = 0; + enum intel_had_aud_buf_type buf_id; + struct snd_pcm_substream *substream; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + pr_debug("Enter:%s\n", __func__); + + substream = intelhaddata->stream_info.had_substream; + had_stream = intelhaddata->private_data; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status == HAD_DRV_CONNECTED) { + pr_debug("Device already connected\n"); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + return retval; + } + buf_id = intelhaddata->curr_buf; + intelhaddata->buff_done = buf_id; + intelhaddata->drv_status = HAD_DRV_CONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_CONNECTED\n", + __func__, __LINE__); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + + pr_debug("Processing HOT_PLUG, buf_id = %d\n", buf_id); + + /* Query display driver for audio register base */ + if (intelhaddata->reg_ops.hdmi_audio_get_register_base( + &intelhaddata->audio_reg_base, + &intelhaddata->audio_cfg_offset)) { + pr_err("Unable to get audio reg base from Display driver\n"); + goto err; + } + + if (intelhaddata->audio_reg_base == NULL) { + pr_err("audio reg base value is NULL\n"); + goto err; + } + + pr_debug("%s audio_reg_base = 0x%p\n", __func__, + intelhaddata->audio_reg_base); + + /* Safety check */ + if (substream) { + pr_debug("There should not be active PB from ALSA\n"); + pr_debug("Signifies, cable is plugged-in even before\n"); + pr_debug("processing snd_pcm_disconnect\n"); + /* Set runtime->state to hw_params done */ + snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP); + } + + had_build_channel_allocation_map(intelhaddata); + + return retval; + +err: + pm_runtime_disable(intelhaddata->dev); + intelhaddata->dev = NULL; + return retval; +} + +int had_process_hot_unplug(struct snd_intelhad *intelhaddata) +{ + int caps, retval = 0; + enum intel_had_aud_buf_type buf_id; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + pr_debug("Enter:%s\n", __func__); + + had_stream = intelhaddata->private_data; + buf_id = intelhaddata->curr_buf; + + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + + if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) { + pr_debug("Device already disconnected\n"); + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + return retval; + + } else { + /* Disable Audio */ + caps = HDMI_AUDIO_BUFFER_DONE; + retval = had_set_caps(HAD_SET_DISABLE_AUDIO_INT, &caps); + retval = had_set_caps(HAD_SET_DISABLE_AUDIO, NULL); + intelhaddata->ops->enable_audio( + intelhaddata->stream_info.had_substream, 0); + } + + intelhaddata->drv_status = HAD_DRV_DISCONNECTED; + pr_debug("%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n", + __func__, __LINE__); + + /* Report to above ALSA layer */ + if (intelhaddata->stream_info.had_substream != NULL) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + pr_debug("%s: unlock -> sending pcm_stop -> lock\n", __func__); + snd_pcm_stop(intelhaddata->stream_info.had_substream, + SNDRV_PCM_STATE_DISCONNECTED); + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + } + + had_stream->stream_type = HAD_INIT; + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + kfree(intelhaddata->chmap->chmap); + intelhaddata->chmap->chmap = NULL; + intelhaddata->audio_reg_base = NULL; + pr_debug("%s: unlocked -> returned\n", __func__); + + return retval; +} + +/** + * had_event_handler - Call back function to handle events + * + * @event_type: Event type to handle + * @data: data related to the event_type + * + * This function is invoked to handle HDMI events from client driver. + */ +int had_event_handler(enum had_event_type event_type, void *data) +{ + int retval = 0; + struct snd_intelhad *intelhaddata = data; + enum intel_had_aud_buf_type buf_id; + struct snd_pcm_substream *substream; + struct had_pvt_data *had_stream; + unsigned long flag_irqs; + + buf_id = intelhaddata->curr_buf; + had_stream = intelhaddata->private_data; + + /* Switching to a function can drop atomicity even in INTR context. + * Thus, a big lock is acquired to maintain atomicity. + * This can be optimized later. + * Currently, only buffer_done/_underrun executes in INTR context. + * Also, locking is implemented separately to avoid real contention + * of data(struct intelhaddata) between IRQ/SOFT_IRQ/PROCESS context. + */ + substream = intelhaddata->stream_info.had_substream; + switch (event_type) { + case HAD_EVENT_AUDIO_BUFFER_DONE: + retval = had_process_buffer_done(intelhaddata); + break; + + case HAD_EVENT_AUDIO_BUFFER_UNDERRUN: + retval = had_process_buffer_underrun(intelhaddata); + break; + + case HAD_EVENT_HOT_PLUG: + retval = had_process_hot_plug(intelhaddata); + break; + + case HAD_EVENT_HOT_UNPLUG: + retval = had_process_hot_unplug(intelhaddata); + break; + + case HAD_EVENT_MODE_CHANGING: + pr_debug(" called _event_handler with _MODE_CHANGE event\n"); + /* Process only if stream is active & cable Plugged-in */ + spin_lock_irqsave(&intelhaddata->had_spinlock, flag_irqs); + if (intelhaddata->drv_status >= HAD_DRV_DISCONNECTED) { + spin_unlock_irqrestore(&intelhaddata->had_spinlock, + flag_irqs); + break; + } + spin_unlock_irqrestore(&intelhaddata->had_spinlock, flag_irqs); + if ((had_stream->stream_type == HAD_RUNNING_STREAM) + && substream) + retval = hdmi_audio_mode_change(substream); + break; + + default: + pr_debug("error un-handled event !!\n"); + retval = -EINVAL; + break; + + } + return retval; +} diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c index f31ab72..16194c6 100644 --- a/sound/x86/intel_hdmi_lpe_audio.c +++ b/sound/x86/intel_hdmi_lpe_audio.c @@ -36,6 +36,7 @@ #include <sound/initval.h> #include <drm/intel_lpe_audio.h> #include "intel_hdmi_lpe_audio.h" +#include "intel_hdmi_audio.h" /* globals*/ struct platform_device *gpdev; @@ -461,9 +462,9 @@ static void notify_audio_lpe(void *audio_ptr) /** * hdmi_lpe_audio_probe - start bridge with i915 * - * This function is called when the i915 driver creates the hdmi-lpe-audio - * platform device. Card creation is deferred until a hot plug event is - * received + * This function is called when the i915 driver creates the + * hdmi-lpe-audio platform device. Card creation is deferred until a + * hot plug event is received */ static int hdmi_lpe_audio_probe(struct platform_device *pdev) { @@ -505,8 +506,8 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) (unsigned int)res_mmio->start, (unsigned int)res_mmio->end); mmio_start = ioremap_nocache(res_mmio->start, - (size_t)((res_mmio->end - res_mmio->start) - + 1)); + (size_t)((res_mmio->end - + res_mmio->start) + 1)); if (!mmio_start) { pr_err("Could not get ioremap\n"); return -EACCES; @@ -556,11 +557,12 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); + ret = hdmi_audio_probe((void *)pdev); + pr_debug("hdmi lpe audio: setting pin eld notify callback\n"); spin_lock_irqsave(&pdata->lpe_audio_slock, flag_irq); pdata->notify_audio_lpe = notify_audio_lpe; - if (pdata->notify_pending) { pr_debug("%s: handle pending notification\n", __func__); @@ -584,6 +586,8 @@ static int hdmi_lpe_audio_remove(struct platform_device *pdev) pr_debug("Enter %s\n", __func__); + hdmi_audio_remove(pdev); + /* get context, release resources */ ctx = platform_get_drvdata(pdev); iounmap(ctx->mmio_start); -- 2.9.3

1 0

[alsa-devel] [RFC PATCH v4 3/7] ALSA: add shell for Intel HDMI LPE audio driver
by Jerome Anand 02 Dec '16

02 Dec '16

On Baytrail and Cherrytrail, HDaudio may be fused out or disabled by the BIOS. This driver enables an alternate path to the i915 display registers and DMA. Although there is no hardware path between i915 display and LPE/SST audio clusters, this HDMI capability is referred to in the documentation as "HDMI LPE Audio" so we keep the name for consistency. There is no hardware path or control dependencies with the LPE/SST DSP functionality. The hdmi-lpe-audio driver will be probed when the i915 driver creates a child platform device. Since this driver is neither SoC nor PCI, a new x86 folder is added Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand(a)intel.com> --- sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 16 + sound/x86/Makefile | 8 + sound/x86/intel_hdmi_lpe_audio.c | 622 +++++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 692 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 1341 insertions(+), 1 deletion(-) create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h diff --git a/sound/Kconfig b/sound/Kconfig index 5a240e0..ee2e69a 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -108,6 +108,8 @@ source "sound/parisc/Kconfig" source "sound/soc/Kconfig" +source "sound/x86/Kconfig" + endif # SND menuconfig SOUND_PRIME diff --git a/sound/Makefile b/sound/Makefile index c41bdf5..6de45d2 100644 --- a/sound/Makefile +++ b/sound/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_SOUND) += soundcore.o obj-$(CONFIG_SOUND_PRIME) += oss/ obj-$(CONFIG_DMASOUND) += oss/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ - firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ + firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ obj-$(CONFIG_SND_AOA) += aoa/ # This one must be compilable even if sound is configured out diff --git a/sound/x86/Kconfig b/sound/x86/Kconfig new file mode 100644 index 0000000..182adf3 --- /dev/null +++ b/sound/x86/Kconfig @@ -0,0 +1,16 @@ +menuconfig SND_X86 + tristate "X86 sound devices" + ---help--- + + X86 sound devices that don't fall under SoC or PCI categories + +if SND_X86 + +config HDMI_LPE_AUDIO + tristate "HDMI audio without HDaudio on Intel Atom platforms" + depends on DRM_I915 + default n + help + Choose this option to support HDMI LPE Audio mode + +endif # SND_X86 diff --git a/sound/x86/Makefile b/sound/x86/Makefile new file mode 100644 index 0000000..78b2ae1 --- /dev/null +++ b/sound/x86/Makefile @@ -0,0 +1,8 @@ +DRIVER_NAME := hdmi_lpe_audio + +ccflags-y += -Idrivers/gpu/drm/i915 + +$(DRIVER_NAME)-objs += \ + intel_hdmi_lpe_audio.o + +obj-$(CONFIG_HDMI_LPE_AUDIO) += $(DRIVER_NAME).o diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c new file mode 100644 index 0000000..f31ab72 --- /dev/null +++ b/sound/x86/intel_hdmi_lpe_audio.c @@ -0,0 +1,622 @@ +/* + * intel_hdmi_lpe_audio.c - Intel HDMI LPE audio driver for Atom platforms + * + * Copyright (C) 2016 Intel Corp + * Authors: + * Jerome Anand <jerome.anand(a)intel.com> + * Aravind Siddappaji <aravindx.siddappaji(a)intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#define pr_fmt(fmt) "hdmi_lpe_audio: " fmt + +#include <linux/platform_device.h> +#include <linux/irqreturn.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <sound/pcm.h> +#include <sound/core.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/control.h> +#include <sound/initval.h> +#include <drm/intel_lpe_audio.h> +#include "intel_hdmi_lpe_audio.h" + +/* globals*/ +struct platform_device *gpdev; +int _hdmi_state; +union otm_hdmi_eld_t hdmi_eld; + +struct hdmi_lpe_audio_ctx { + int irq; + void __iomem *mmio_start; + had_event_call_back had_event_callbacks; + struct snd_intel_had_interface *had_interface; + void *had_pvt_data; + int tmds_clock_speed; + unsigned int had_config_offset; + int hdmi_audio_interrupt_mask; + struct work_struct hdmi_audio_wq; +}; + +static inline void hdmi_set_eld(void *eld) +{ + int size = (sizeof(hdmi_eld)) > HDMI_MAX_ELD_BYTES ? + HDMI_MAX_ELD_BYTES : + (sizeof(hdmi_eld)); + + memcpy((void *)&hdmi_eld, eld, size); +} + +static inline int hdmi_get_eld(void *eld) +{ + memcpy(eld, (void *)&hdmi_eld, sizeof(hdmi_eld)); + + { + int i; + uint8_t *eld_data = (uint8_t *)&hdmi_eld; + + pr_debug("hdmi_get_eld:\n{{"); + + for (i = 0; i < sizeof(hdmi_eld); i++) + pr_debug("0x%x, ", eld_data[i]); + + pr_debug("}}\n"); + } + return HAD_SUCCESS; +} + + +static inline struct hdmi_lpe_audio_ctx *get_hdmi_context(void) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + return ctx; +} + +/* + * return whether HDMI audio device is busy. + */ +bool mid_hdmi_audio_is_busy(void *ddev) +{ + struct hdmi_lpe_audio_ctx *ctx; + int hdmi_audio_busy = 0; + struct hdmi_audio_event hdmi_audio_event; + + pr_debug("%s: Enter", __func__); + + ctx = platform_get_drvdata(gpdev); + + if (_hdmi_state == hdmi_connector_status_disconnected) { + /* HDMI is not connected, assuming audio device is idle. */ + return false; + } + + if (ctx->had_interface) { + hdmi_audio_event.type = HAD_EVENT_QUERY_IS_AUDIO_BUSY; + hdmi_audio_busy = ctx->had_interface->query( + ctx->had_pvt_data, + hdmi_audio_event); + return hdmi_audio_busy != 0; + } + return false; +} + +/* + * return whether HDMI audio device is suspended. + */ +bool mid_hdmi_audio_suspend(void *ddev) +{ + struct hdmi_lpe_audio_ctx *ctx; + struct hdmi_audio_event hdmi_audio_event; + int ret = 0; + + ctx = platform_get_drvdata(gpdev); + + if (_hdmi_state == hdmi_connector_status_disconnected) { + /* HDMI is not connected, assuming audio device + * is suspended already. + */ + return true; + } + + pr_debug("%s: _hdmi_state %d", __func__, + _hdmi_state); + + if (ctx->had_interface) { + hdmi_audio_event.type = 0; + ret = ctx->had_interface->suspend(ctx->had_pvt_data, + hdmi_audio_event); + return (ret == 0) ? true : false; + } + return true; +} + +void mid_hdmi_audio_resume(void *ddev) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + + if (_hdmi_state == hdmi_connector_status_disconnected) { + /* HDMI is not connected, there is no need + * to resume audio device. + */ + return; + } + + pr_debug("%s: _hdmi_state %d", __func__, _hdmi_state); + + if (ctx->had_interface) + ctx->had_interface->resume(ctx->had_pvt_data); +} + +void mid_hdmi_audio_signal_event(enum had_event_type event) +{ + struct hdmi_lpe_audio_ctx *ctx; + + pr_debug("%s: Enter\n", __func__); + + ctx = platform_get_drvdata(gpdev); + + if (ctx->had_event_callbacks) + (*ctx->had_event_callbacks)(event, + ctx->had_pvt_data); +} + +/** + * hdmi_audio_write: + * used to write into display controller HDMI audio registers. + * + */ +static int hdmi_audio_write(uint32_t reg, uint32_t val) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + + pr_debug("%s: reg[0x%x] = 0x%x\n", __func__, reg, val); + + iowrite32(val, (ctx->mmio_start+reg)); + + return HAD_SUCCESS; +} + +/** + * hdmi_audio_read: + * used to get the register value read from + * display controller HDMI audio registers. + */ +static int hdmi_audio_read(uint32_t reg, uint32_t *val) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + *val = ioread32(ctx->mmio_start+reg); + pr_debug("%s: reg[0x%x] = 0x%x\n", __func__, reg, *val); + return HAD_SUCCESS; +} + +/** + * hdmi_audio_rmw: + * used to update the masked bits in display controller HDMI + * audio registers. + */ +static int hdmi_audio_rmw(uint32_t reg, uint32_t val, uint32_t mask) +{ + struct hdmi_lpe_audio_ctx *ctx; + uint32_t val_tmp = 0; + + ctx = platform_get_drvdata(gpdev); + + val_tmp = (val & mask) | + ((ioread32(ctx->mmio_start + reg)) & ~mask); + + iowrite32(val_tmp, (ctx->mmio_start+reg)); + pr_debug("%s: reg[0x%x] = 0x%x\n", __func__, reg, val_tmp); + + return HAD_SUCCESS; +} + +/** + * hdmi_audio_get_caps: + * used to return the HDMI audio capabilities. + * e.g. resolution, frame rate. + */ +static int hdmi_audio_get_caps(enum had_caps_list get_element, + void *capabilities) +{ + struct hdmi_lpe_audio_ctx *ctx; + int ret = HAD_SUCCESS; + + ctx = get_hdmi_context(); + + pr_debug("%s: Enter\n", __func__); + + switch (get_element) { + case HAD_GET_ELD: + ret = hdmi_get_eld(capabilities); + break; + case HAD_GET_DISPLAY_RATE: + /* ToDo: Verify if sampling freq logic is correct */ + memcpy(capabilities, &(ctx->tmds_clock_speed), + sizeof(uint32_t)); + pr_debug("%s: tmds_clock_speed = 0x%x\n", __func__, + ctx->tmds_clock_speed); + break; + default: + break; + } + + return ret; +} + +/** + * hdmi_audio_get_register_base + * used to get the current hdmi base address + */ +int hdmi_audio_get_register_base(uint32_t **reg_base, + uint32_t *config_offset) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + *reg_base = (uint32_t *)(ctx->mmio_start); + *config_offset = ctx->had_config_offset; + pr_debug("%s: reg_base = 0x%p, cfg_off = 0x%x\n", __func__, + *reg_base, *config_offset); + return HAD_SUCCESS; +} + +/** + * hdmi_audio_set_caps: + * used to set the HDMI audio capabilities. + * e.g. Audio INT. + */ +int hdmi_audio_set_caps(enum had_caps_list set_element, + void *capabilties) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + + pr_debug("%s: cap_id = 0x%x\n", __func__, set_element); + + switch (set_element) { + case HAD_SET_ENABLE_AUDIO_INT: + { + uint32_t status_reg; + + hdmi_audio_read(AUD_HDMI_STATUS_v2 + + ctx->had_config_offset, &status_reg); + status_reg |= + HDMI_AUDIO_BUFFER_DONE | HDMI_AUDIO_UNDERRUN; + hdmi_audio_write(AUD_HDMI_STATUS_v2 + + ctx->had_config_offset, status_reg); + hdmi_audio_read(AUD_HDMI_STATUS_v2 + + ctx->had_config_offset, &status_reg); + + } + break; + default: + break; + } + + return HAD_SUCCESS; +} + +static struct hdmi_audio_registers_ops hdmi_audio_reg_ops = { + .hdmi_audio_get_register_base = hdmi_audio_get_register_base, + .hdmi_audio_read_register = hdmi_audio_read, + .hdmi_audio_write_register = hdmi_audio_write, + .hdmi_audio_read_modify = hdmi_audio_rmw, +}; + +static struct hdmi_audio_query_set_ops hdmi_audio_get_set_ops = { + .hdmi_audio_get_caps = hdmi_audio_get_caps, + .hdmi_audio_set_caps = hdmi_audio_set_caps, +}; + +int mid_hdmi_audio_setup( + had_event_call_back audio_callbacks, + struct hdmi_audio_registers_ops *reg_ops, + struct hdmi_audio_query_set_ops *query_ops) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + + pr_debug("%s: called\n", __func__); + + reg_ops->hdmi_audio_get_register_base = + (hdmi_audio_reg_ops.hdmi_audio_get_register_base); + reg_ops->hdmi_audio_read_register = + (hdmi_audio_reg_ops.hdmi_audio_read_register); + reg_ops->hdmi_audio_write_register = + (hdmi_audio_reg_ops.hdmi_audio_write_register); + reg_ops->hdmi_audio_read_modify = + (hdmi_audio_reg_ops.hdmi_audio_read_modify); + query_ops->hdmi_audio_get_caps = + hdmi_audio_get_set_ops.hdmi_audio_get_caps; + query_ops->hdmi_audio_set_caps = + hdmi_audio_get_set_ops.hdmi_audio_set_caps; + + ctx->had_event_callbacks = audio_callbacks; + + return HAD_SUCCESS; +} + +void _had_wq(struct work_struct *work) +{ + mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG); +} + +int mid_hdmi_audio_register(struct snd_intel_had_interface *driver, + void *had_data) +{ + struct hdmi_lpe_audio_ctx *ctx; + + ctx = platform_get_drvdata(gpdev); + + pr_debug("%s: called\n", __func__); + + ctx->had_pvt_data = had_data; + ctx->had_interface = driver; + + /* The Audio driver is loading now and we need to notify + * it if there is an HDMI device attached + */ + INIT_WORK(&ctx->hdmi_audio_wq, _had_wq); + pr_debug("%s: Scheduling HDMI audio work queue\n", __func__); + schedule_work(&ctx->hdmi_audio_wq); + + return HAD_SUCCESS; +} + +static irqreturn_t display_pipe_interrupt_handler(int irq, void *dev_id) +{ + u32 audio_stat, audio_reg; + + struct hdmi_lpe_audio_ctx *ctx; + + pr_debug("%s: Enter\n", __func__); + + ctx = platform_get_drvdata(gpdev); + + audio_reg = ctx->had_config_offset + AUD_HDMI_STATUS_v2; + hdmi_audio_read(audio_reg, &audio_stat); + + if (audio_stat & HDMI_AUDIO_UNDERRUN) { + hdmi_audio_write(audio_reg, HDMI_AUDIO_UNDERRUN); + mid_hdmi_audio_signal_event( + HAD_EVENT_AUDIO_BUFFER_UNDERRUN); + } + + if (audio_stat & HDMI_AUDIO_BUFFER_DONE) { + hdmi_audio_write(audio_reg, HDMI_AUDIO_BUFFER_DONE); + mid_hdmi_audio_signal_event( + HAD_EVENT_AUDIO_BUFFER_DONE); + } + + return IRQ_HANDLED; +} + +static void notify_audio_lpe(void *audio_ptr) +{ + struct hdmi_lpe_audio_ctx *ctx = get_hdmi_context(); + struct intel_hdmi_lpe_audio_pdata *pdata = gpdev->dev.platform_data; + struct intel_hdmi_lpe_audio_eld *eld = audio_ptr; + + if (pdata->hdmi_connected != true) { + + pr_debug("%s: Event: HAD_NOTIFY_HOT_UNPLUG\n", + __func__); + + if (_hdmi_state == hdmi_connector_status_connected) { + + _hdmi_state = + hdmi_connector_status_disconnected; + + mid_hdmi_audio_signal_event( + HAD_EVENT_HOT_UNPLUG); + } else + pr_debug("%s: Already Unplugged!\n", __func__); + + } else if (eld != NULL) { + + hdmi_set_eld(eld->eld_data); + + mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG); + + _hdmi_state = hdmi_connector_status_connected; + + pr_debug("%s: HAD_NOTIFY_ELD : port = %d, tmds = %d\n", + __func__, eld->port_id, + pdata->tmds_clock_speed); + + if (pdata->tmds_clock_speed) { + ctx->tmds_clock_speed = pdata->tmds_clock_speed; + mid_hdmi_audio_signal_event(HAD_EVENT_MODE_CHANGING); + } + } else + pr_debug("%s: Event: NULL EDID!!\n", __func__); +} + +/** + * hdmi_lpe_audio_probe - start bridge with i915 + * + * This function is called when the i915 driver creates the hdmi-lpe-audio + * platform device. Card creation is deferred until a hot plug event is + * received + */ +static int hdmi_lpe_audio_probe(struct platform_device *pdev) +{ + struct hdmi_lpe_audio_ctx *ctx; + struct intel_hdmi_lpe_audio_pdata *pdata; + int irq; + struct resource *res_mmio; + void __iomem *mmio_start; + int ret = 0; + unsigned long flag_irq; + const struct pci_device_id cherryview_ids[] = { + {PCI_DEVICE(0x8086, 0x22b0)}, + {PCI_DEVICE(0x8086, 0x22b1)}, + {PCI_DEVICE(0x8086, 0x22b2)}, + {PCI_DEVICE(0x8086, 0x22b3)}, + {} + }; + + pr_debug("Enter %s\n", __func__); + + /*TBD:remove globals*/ + gpdev = pdev; + _hdmi_state = hdmi_connector_status_disconnected; + + /* get resources */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + pr_err("Could not get irq resource\n"); + return -ENODEV; + } + + res_mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mmio) { + pr_err("Could not get IO_MEM resources\n"); + return -ENXIO; + } + + pr_debug("%s: mmio_start = 0x%x, mmio_end = 0x%x\n", __func__, + (unsigned int)res_mmio->start, (unsigned int)res_mmio->end); + + mmio_start = ioremap_nocache(res_mmio->start, + (size_t)((res_mmio->end - res_mmio->start) + + 1)); + if (!mmio_start) { + pr_err("Could not get ioremap\n"); + return -EACCES; + } + + /* setup interrupt handler */ + ret = request_irq(irq, display_pipe_interrupt_handler, + 0, /* FIXME: is IRQF_SHARED needed ? */ + pdev->name, + NULL); + if (ret < 0) { + pr_err("request_irq failed\n"); + iounmap(mmio_start); + return -ENODEV; + } + + /* alloc and save context */ + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (ctx == NULL) { + free_irq(irq, NULL); + iounmap(mmio_start); + return -ENOMEM; + } + + ctx->irq = irq; + pr_debug("hdmi lpe audio: irq num = %d\n", irq); + ctx->mmio_start = mmio_start; + ctx->tmds_clock_speed = DIS_SAMPLE_RATE_148_5; + + if (pci_dev_present(cherryview_ids)) { + pr_debug("%s: Cherrytrail LPE - Detected\n", __func__); + ctx->had_config_offset = AUDIO_HDMI_CONFIG_C; + } else { + pr_debug("%s: Baytrail LPE - Assume\n", __func__); + ctx->had_config_offset = AUDIO_HDMI_CONFIG_A; + } + + pdata = pdev->dev.platform_data; + + if (pdata == NULL) { + pr_err("%s: quit: pdata not allocated by i915!!\n", __func__); + kfree(ctx); + free_irq(irq, NULL); + iounmap(mmio_start); + return -ENOMEM; + } + + platform_set_drvdata(pdev, ctx); + + pr_debug("hdmi lpe audio: setting pin eld notify callback\n"); + + spin_lock_irqsave(&pdata->lpe_audio_slock, flag_irq); + pdata->notify_audio_lpe = notify_audio_lpe; + + if (pdata->notify_pending) { + + pr_debug("%s: handle pending notification\n", __func__); + notify_audio_lpe(&pdata->eld); + pdata->notify_pending = false; + } + spin_unlock_irqrestore(&pdata->lpe_audio_slock, flag_irq); + + return ret; +} + +/** + * hdmi_lpe_audio_remove - stop bridge with i915 + * + * This function is called when the platform device is destroyed. The sound + * card should have been removed on hot plug event. + */ +static int hdmi_lpe_audio_remove(struct platform_device *pdev) +{ + struct hdmi_lpe_audio_ctx *ctx; + + pr_debug("Enter %s\n", __func__); + + /* get context, release resources */ + ctx = platform_get_drvdata(pdev); + iounmap(ctx->mmio_start); + free_irq(ctx->irq, NULL); + kfree(ctx); + return HAD_SUCCESS; +} + +static int hdmi_lpe_audio_suspend(struct platform_device *pt_dev, + pm_message_t state) +{ + pr_debug("Enter %s\n", __func__); + mid_hdmi_audio_suspend(NULL); + return HAD_SUCCESS; +} + +static int hdmi_lpe_audio_resume(struct platform_device *pt_dev) +{ + pr_debug("Enter %s\n", __func__); + mid_hdmi_audio_resume(NULL); + return HAD_SUCCESS; +} + +static struct platform_driver hdmi_lpe_audio_driver = { + .driver = { + .name = "hdmi-lpe-audio", + }, + .probe = hdmi_lpe_audio_probe, + .remove = hdmi_lpe_audio_remove, + .suspend = hdmi_lpe_audio_suspend, + .resume = hdmi_lpe_audio_resume +}; + +module_platform_driver(hdmi_lpe_audio_driver); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:hdmi_lpe_audio"); diff --git a/sound/x86/intel_hdmi_lpe_audio.h b/sound/x86/intel_hdmi_lpe_audio.h new file mode 100644 index 0000000..d4b94f0a --- /dev/null +++ b/sound/x86/intel_hdmi_lpe_audio.h @@ -0,0 +1,692 @@ +/* + * intel_hdmi_lpe_audio.h - Intel HDMI LPE audio driver + * + * Copyright (C) 2016 Intel Corp + * Authors: Sailaja Bandarupalli <sailaja.bandarupalli(a)intel.com> + * Ramesh Babu K V <ramesh.babu(a)intel.com> + * Vaibhav Agarwal <vaibhav.agarwal(a)intel.com> + * Jerome Anand <jerome.anand(a)intel.com> + * Aravind Siddappaji <aravindx.siddappaji(a)intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#ifndef __INTEL_HDMI_LPE_AUDIO_H +#define __INTEL_HDMI_LPE_AUDIO_H + +#include <linux/types.h> +#include <sound/initval.h> +#include <linux/version.h> +#include <linux/pm_runtime.h> +#include <sound/asoundef.h> +#include <sound/control.h> +#include <sound/pcm.h> + +#define HMDI_LPE_AUDIO_DRIVER_NAME "intel-hdmi-lpe-audio" +#define HAD_DRIVER_VERSION "0.01.003" +#define HAD_MAX_DEVICES 1 +#define HAD_MIN_CHANNEL 2 +#define HAD_MAX_CHANNEL 8 +#define HAD_NUM_OF_RING_BUFS 4 + +/* HDMI Audio LPE Error Codes */ +#define HAD_SUCCESS 0 +#define HAD_FAIL 1 + +/* Assume 192KHz, 8channel, 25msec period */ +#define HAD_MAX_BUFFER (600*1024) +#define HAD_MIN_BUFFER (32*1024) +#define HAD_MAX_PERIODS 4 +#define HAD_MIN_PERIODS 4 +#define HAD_MAX_PERIOD_BYTES (HAD_MAX_BUFFER/HAD_MIN_PERIODS) +#define HAD_MIN_PERIOD_BYTES 256 +#define HAD_FIFO_SIZE 0 /* fifo not being used */ +#define MAX_SPEAKERS 8 +/* TODO: Add own tlv when channel map is ported for user space */ +#define USE_ALSA_DEFAULT_TLV + +#define AUD_SAMPLE_RATE_32 32000 +#define AUD_SAMPLE_RATE_44_1 44100 +#define AUD_SAMPLE_RATE_48 48000 +#define AUD_SAMPLE_RATE_88_2 88200 +#define AUD_SAMPLE_RATE_96 96000 +#define AUD_SAMPLE_RATE_176_4 176400 +#define AUD_SAMPLE_RATE_192 192000 + +#define HAD_MIN_RATE AUD_SAMPLE_RATE_32 +#define HAD_MAX_RATE AUD_SAMPLE_RATE_192 + +#define DIS_SAMPLE_RATE_25_2 25200 +#define DIS_SAMPLE_RATE_27 27000 +#define DIS_SAMPLE_RATE_54 54000 +#define DIS_SAMPLE_RATE_74_25 74250 +#define DIS_SAMPLE_RATE_148_5 148500 +#define HAD_REG_WIDTH 0x08 +#define HAD_MAX_HW_BUFS 0x04 +#define HAD_MAX_DIP_WORDS 16 +#define INTEL_HAD "IntelHdmiLpeAudio" + +/* _AUD_CONFIG register MASK */ +#define AUD_CONFIG_MASK_UNDERRUN 0xC0000000 +#define AUD_CONFIG_MASK_SRDBG 0x00000002 +#define AUD_CONFIG_MASK_FUNCRST 0x00000001 + +#define MAX_CNT 0xFF +#define HAD_SUSPEND_DELAY 1000 + +#define OTM_HDMI_ELD_SIZE 128 + +union otm_hdmi_eld_t { + uint8_t eld_data[OTM_HDMI_ELD_SIZE]; + #pragma pack(1) + struct { + /* Byte[0] = ELD Version Number */ + union { + uint8_t byte0; + struct { + uint8_t reserved:3; /* Reserf */ + uint8_t eld_ver:5; /* ELD Version Number */ + /* 00000b - reserved + * 00001b - first rev, obsoleted + * 00010b - version 2, supporting CEA version + * 861D or below + * 00011b:11111b - reserved + * for future + */ + }; + }; + + /* Byte[1] = Vendor Version Field */ + union { + uint8_t vendor_version; + struct { + uint8_t reserved1:3; + uint8_t veld_ver:5; /* Version number of the ELD + * extension. This value is + * provisioned and unique to + * each vendor. + */ + }; + }; + + /* Byte[2] = Baseline Length field */ + uint8_t baseline_eld_length; /* Length of the Baseline structure + * divided by Four. + */ + + /* Byte [3] = Reserved for future use */ + uint8_t byte3; + + /* Starting of the BaseLine EELD structure + * Byte[4] = Monitor Name Length + */ + union { + uint8_t byte4; + struct { + uint8_t mnl:5; + uint8_t cea_edid_rev_id:3; + }; + }; + + /* Byte[5] = Capabilities */ + union { + uint8_t capabilities; + struct { + uint8_t hdcp:1; /* HDCP support */ + uint8_t ai_support:1; /* AI support */ + uint8_t connection_type:2; /* Connection type + * 00 - HDMI + * 01 - DP + * 10 -11 Reserved + * for future + * connection types + */ + uint8_t sadc:4; /* Indicates number of 3 bytes + * Short Audio Descriptors. + */ + }; + }; + + /* Byte[6] = Audio Synch Delay */ + uint8_t audio_synch_delay; /* Amount of time reported by the + * sink that the video trails audio + * in milliseconds. + */ + + /* Byte[7] = Speaker Allocation Block */ + union { + uint8_t speaker_allocation_block; + struct { + uint8_t flr:1; /*Front Left and Right channels*/ + uint8_t lfe:1; /*Low Frequency Effect channel*/ + uint8_t fc:1; /*Center transmission channel*/ + uint8_t rlr:1; /*Rear Left and Right channels*/ + uint8_t rc:1; /*Rear Center channel*/ + uint8_t flrc:1; /*Front left and Right of Center + *transmission channels + */ + uint8_t rlrc:1; /*Rear left and Right of Center + *transmission channels + */ + uint8_t reserved3:1; /* Reserved */ + }; + }; + + /* Byte[8 - 15] - 8 Byte port identification value */ + uint8_t port_id_value[8]; + + /* Byte[16 - 17] - 2 Byte Manufacturer ID */ + uint8_t manufacturer_id[2]; + + /* Byte[18 - 19] - 2 Byte Product ID */ + uint8_t product_id[2]; + + /* Byte [20-83] - 64 Bytes of BaseLine Data */ + uint8_t mn_sand_sads[64]; /* This will include + * - ASCII string of Monitor name + * - List of 3 byte SADs + * - Zero padding + */ + + /* Vendor ELD Block should continue here! + * No Vendor ELD block defined as of now. + */ + }; + #pragma pack() +}; + +/** + * enum had_status - Audio stream states + * + * @STREAM_INIT: Stream initialized + * @STREAM_RUNNING: Stream running + * @STREAM_PAUSED: Stream paused + * @STREAM_DROPPED: Stream dropped + */ +enum had_stream_status { + STREAM_INIT = 0, + STREAM_RUNNING = 1, + STREAM_PAUSED = 2, + STREAM_DROPPED = 3 +}; + +/** + * enum had_status_stream - HAD stream states + */ +enum had_status_stream { + HAD_INIT = 0, + HAD_RUNNING_STREAM, +}; + +enum had_drv_status { + HAD_DRV_CONNECTED, + HAD_DRV_RUNNING, + HAD_DRV_DISCONNECTED, + HAD_DRV_SUSPENDED, + HAD_DRV_ERR, +}; + +/* enum intel_had_aud_buf_type - HDMI controller ring buffer types */ +enum intel_had_aud_buf_type { + HAD_BUF_TYPE_A = 0, + HAD_BUF_TYPE_B = 1, + HAD_BUF_TYPE_C = 2, + HAD_BUF_TYPE_D = 3, +}; + +enum num_aud_ch { + CH_STEREO = 0, + CH_THREE_FOUR = 1, + CH_FIVE_SIX = 2, + CH_SEVEN_EIGHT = 3 +}; + +/* HDMI Controller register offsets - audio domain common */ +/* Base address for below regs = 0x65000 */ +enum hdmi_ctrl_reg_offset_common { + AUDIO_HDMI_CONFIG_A = 0x000, + AUDIO_HDMI_CONFIG_B = 0x800, + AUDIO_HDMI_CONFIG_C = 0x900, +}; +/* HDMI controller register offsets */ +enum hdmi_ctrl_reg_offset_v1 { + AUD_CONFIG = 0x0, + AUD_CH_STATUS_0 = 0x08, + AUD_CH_STATUS_1 = 0x0C, + AUD_HDMI_CTS = 0x10, + AUD_N_ENABLE = 0x14, + AUD_SAMPLE_RATE = 0x18, + AUD_BUF_CONFIG = 0x20, + AUD_BUF_CH_SWAP = 0x24, + AUD_BUF_A_ADDR = 0x40, + AUD_BUF_A_LENGTH = 0x44, + AUD_BUF_B_ADDR = 0x48, + AUD_BUF_B_LENGTH = 0x4c, + AUD_BUF_C_ADDR = 0x50, + AUD_BUF_C_LENGTH = 0x54, + AUD_BUF_D_ADDR = 0x58, + AUD_BUF_D_LENGTH = 0x5c, + AUD_CNTL_ST = 0x60, + AUD_HDMI_STATUS = 0x68, + AUD_HDMIW_INFOFR = 0x114, +}; + +/* + * Delta changes in HDMI controller register offsets + * compare to v1 version + */ + +enum hdmi_ctrl_reg_offset_v2 { + AUD_HDMI_STATUS_v2 = 0x64, + AUD_HDMIW_INFOFR_v2 = 0x68, +}; + +/* + * CEA speaker placement: + * + * FL FLC FC FRC FR + * + * LFE + * + * RL RLC RC RRC RR + * + * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M + * corresponds to CEA RL/RR; The SMPTE channel _assignment_ C/LFE is + * swapped to CEA LFE/FC. + */ +enum cea_speaker_placement { + FL = (1 << 0), /* Front Left */ + FC = (1 << 1), /* Front Center */ + FR = (1 << 2), /* Front Right */ + FLC = (1 << 3), /* Front Left Center */ + FRC = (1 << 4), /* Front Right Center */ + RL = (1 << 5), /* Rear Left */ + RC = (1 << 6), /* Rear Center */ + RR = (1 << 7), /* Rear Right */ + RLC = (1 << 8), /* Rear Left Center */ + RRC = (1 << 9), /* Rear Right Center */ + LFE = (1 << 10), /* Low Frequency Effect */ +}; + +struct cea_channel_speaker_allocation { + int ca_index; + int speakers[8]; + + /* derived values, just for convenience */ + int channels; + int spk_mask; +}; + +struct channel_map_table { + unsigned char map; /* ALSA API channel map position */ + unsigned char cea_slot; /* CEA slot value */ + int spk_mask; /* speaker position bit mask */ +}; + +/** + * union aud_cfg - Audio configuration + * + * @cfg_regx: individual register bits + * @cfg_regval: full register value + * + */ +union aud_cfg { + struct { + u32 aud_en:1; + u32 layout:1; + u32 fmt:2; + u32 num_ch:2; + u32 rsvd0:1; + u32 set:1; + u32 flat:1; + u32 val_bit:1; + u32 user_bit:1; + u32 underrun:1; + u32 rsvd1:20; + } cfg_regx; + struct { + u32 aud_en:1; + u32 layout:1; + u32 fmt:2; + u32 num_ch:3; + u32 set:1; + u32 flat:1; + u32 val_bit:1; + u32 user_bit:1; + u32 underrun:1; + u32 packet_mode:1; + u32 left_align:1; + u32 bogus_sample:1; + u32 dp_modei:1; + u32 rsvd:16; + } cfg_regx_v2; + u32 cfg_regval; +}; + +/** + * union aud_ch_status_0 - Audio Channel Status 0 Attributes + * + * @status_0_regx:individual register bits + * @status_0_regval:full register value + * + */ +union aud_ch_status_0 { + struct { + u32 ch_status:1; + u32 lpcm_id:1; + u32 cp_info:1; + u32 format:3; + u32 mode:2; + u32 ctg_code:8; + u32 src_num:4; + u32 ch_num:4; + u32 samp_freq:4; + u32 clk_acc:2; + u32 rsvd:2; + } status_0_regx; + u32 status_0_regval; +}; + +/** + * union aud_ch_status_1 - Audio Channel Status 1 Attributes + * + * @status_1_regx: individual register bits + * @status_1_regval: full register value + * + */ +union aud_ch_status_1 { + struct { + u32 max_wrd_len:1; + u32 wrd_len:3; + u32 rsvd:28; + } status_1_regx; + u32 status_1_regval; +}; + +/** + * union aud_hdmi_cts - CTS register + * + * @cts_regx: individual register bits + * @cts_regval: full register value + * + */ +union aud_hdmi_cts { + struct { + u32 cts_val:20; + u32 en_cts_prog:1; + u32 rsvd:11; + } cts_regx; + struct { + u32 cts_val:24; + u32 en_cts_prog:1; + u32 rsvd:7; + } cts_regx_v2; + u32 cts_regval; +}; + +/** + * union aud_hdmi_n_enable - N register + * + * @n_regx: individual register bits + * @n_regval: full register value + * + */ +union aud_hdmi_n_enable { + struct { + u32 n_val:20; + u32 en_n_prog:1; + u32 rsvd:11; + } n_regx; + struct { + u32 n_val:24; + u32 en_n_prog:1; + u32 rsvd:7; + } n_regx_v2; + u32 n_regval; +}; + +/** + * union aud_buf_config - Audio Buffer configurations + * + * @buf_cfg_regx: individual register bits + * @buf_cfgval: full register value + * + */ +union aud_buf_config { + struct { + u32 fifo_width:8; + u32 rsvd0:8; + u32 aud_delay:8; + u32 rsvd1:8; + } buf_cfg_regx; + struct { + u32 audio_fifo_watermark:8; + u32 dma_fifo_watermark:3; + u32 rsvd0:5; + u32 aud_delay:8; + u32 rsvd1:8; + } buf_cfg_regx_v2; + u32 buf_cfgval; +}; + +/** + * union aud_buf_ch_swap - Audio Sample Swapping offset + * + * @buf_ch_swap_regx: individual register bits + * @buf_ch_swap_val: full register value + * + */ +union aud_buf_ch_swap { + struct { + u32 first_0:3; + u32 second_0:3; + u32 first_1:3; + u32 second_1:3; + u32 first_2:3; + u32 second_2:3; + u32 first_3:3; + u32 second_3:3; + u32 rsvd:8; + } buf_ch_swap_regx; + u32 buf_ch_swap_val; +}; + +/** + * union aud_buf_addr - Address for Audio Buffer + * + * @buf_addr_regx: individual register bits + * @buf_addr_val: full register value + * + */ +union aud_buf_addr { + struct { + u32 valid:1; + u32 intr_en:1; + u32 rsvd:4; + u32 addr:26; + } buf_addr_regx; + u32 buf_addr_val; +}; + +/** + * union aud_buf_len - Length of Audio Buffer + * + * @buf_len_regx: individual register bits + * @buf_len_val: full register value + * + */ +union aud_buf_len { + struct { + u32 buf_len:20; + u32 rsvd:12; + } buf_len_regx; + u32 buf_len_val; +}; + +/** + * union aud_ctrl_st - Audio Control State Register offset + * + * @ctrl_regx: individual register bits + * @ctrl_val: full register value + * + */ +union aud_ctrl_st { + struct { + u32 ram_addr:4; + u32 eld_ack:1; + u32 eld_addr:4; + u32 eld_buf_size:5; + u32 eld_valid:1; + u32 cp_ready:1; + u32 dip_freq:2; + u32 dip_idx:3; + u32 dip_en_sta:4; + u32 rsvd:7; + } ctrl_regx; + u32 ctrl_val; +}; + +/** + * union aud_info_frame1 - Audio HDMI Widget Data Island Packet offset + * + * @fr1_regx: individual register bits + * @fr1_val: full register value + * + */ +union aud_info_frame1 { + struct { + u32 pkt_type:8; + u32 ver_num:8; + u32 len:5; + u32 rsvd:11; + } fr1_regx; + u32 fr1_val; +}; + +/** + * union aud_info_frame2 - DIP frame 2 + * + * @fr2_regx: individual register bits + * @fr2_val: full register value + * + */ +union aud_info_frame2 { + struct { + u32 chksum:8; + u32 chnl_cnt:3; + u32 rsvd0:1; + u32 coding_type:4; + u32 smpl_size:2; + u32 smpl_freq:3; + u32 rsvd1:3; + u32 format:8; + } fr2_regx; + u32 fr2_val; +}; + +/** + * union aud_info_frame3 - DIP frame 3 + * + * @fr3_regx: individual register bits + * @fr3_val: full register value + * + */ +union aud_info_frame3 { + struct { + u32 chnl_alloc:8; + u32 rsvd0:3; + u32 lsv:4; + u32 dm_inh:1; + u32 rsvd1:16; + } fr3_regx; + u32 fr3_val; +}; + +enum hdmi_connector_status { + hdmi_connector_status_connected = 1, + hdmi_connector_status_disconnected = 2, + hdmi_connector_status_unknown = 3, +}; + +#define HDMI_AUDIO_UNDERRUN (1UL<<31) +#define HDMI_AUDIO_BUFFER_DONE (1UL<<29) + + +#define PORT_ENABLE (1 << 31) +#define SDVO_AUDIO_ENABLE (1 << 6) + +enum had_caps_list { + HAD_GET_ELD = 1, + HAD_GET_DISPLAY_RATE, + HAD_SET_ENABLE_AUDIO, + HAD_SET_DISABLE_AUDIO, + HAD_SET_ENABLE_AUDIO_INT, + HAD_SET_DISABLE_AUDIO_INT, +}; + +enum had_event_type { + HAD_EVENT_HOT_PLUG = 1, + HAD_EVENT_HOT_UNPLUG, + HAD_EVENT_MODE_CHANGING, + HAD_EVENT_AUDIO_BUFFER_DONE, + HAD_EVENT_AUDIO_BUFFER_UNDERRUN, + HAD_EVENT_QUERY_IS_AUDIO_BUSY, + HAD_EVENT_QUERY_IS_AUDIO_SUSPENDED, +}; + +/* + * HDMI Display Controller Audio Interface + * + */ +typedef int (*had_event_call_back) (enum had_event_type event_type, + void *ctxt_info); + +struct hdmi_audio_registers_ops { + int (*hdmi_audio_get_register_base)(uint32_t **reg_base, + uint32_t *config_offset); + int (*hdmi_audio_read_register)(uint32_t reg_addr, uint32_t *data); + int (*hdmi_audio_write_register)(uint32_t reg_addr, uint32_t data); + int (*hdmi_audio_read_modify)(uint32_t reg_addr, uint32_t data, + uint32_t mask); +}; + +struct hdmi_audio_query_set_ops { + int (*hdmi_audio_get_caps)(enum had_caps_list query_element, + void *capabilties); + int (*hdmi_audio_set_caps)(enum had_caps_list set_element, + void *capabilties); +}; + +struct hdmi_audio_event { + int type; +}; + +struct snd_intel_had_interface { + const char *name; + int (*query)(void *had_data, struct hdmi_audio_event event); + int (*suspend)(void *had_data, struct hdmi_audio_event event); + int (*resume)(void *had_data); +}; + +bool mid_hdmi_audio_is_busy(void *dev); +bool mid_hdmi_audio_suspend(void *dev); +void mid_hdmi_audio_resume(void *dev); +void mid_hdmi_audio_signal_event(enum had_event_type event); +int mid_hdmi_audio_setup( + had_event_call_back audio_callbacks, + struct hdmi_audio_registers_ops *reg_ops, + struct hdmi_audio_query_set_ops *query_ops); +int mid_hdmi_audio_register( + struct snd_intel_had_interface *driver, + void *had_data); + +#endif -- 2.9.3

1 0

[alsa-devel] [RFC PATCH v4 2/7] drm/i915: Add support for audio driver notifications
by Jerome Anand 02 Dec '16

02 Dec '16

Notifiations like mode change, hot plug and edid to the audio driver are added. This is inturn used by the audio driver for its functionality. A new interface file capturing the notifications needed by the audio driver is added Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand(a)intel.com> --- drivers/gpu/drm/i915/i915_drv.h | 3 +++ drivers/gpu/drm/i915/intel_audio.c | 8 ++++++ drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 46 ++++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 1 + 5 files changed, 59 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2a79048..33bc44c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3561,6 +3561,9 @@ int intel_lpe_audio_setup(struct drm_i915_private *dev_priv); void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv); +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, + void *eld, int port, int tmds_clk_speed, + bool connected); /* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 1c509f7..55a6831 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/component.h> #include <drm/i915_component.h> +#include <drm/intel_lpe_audio.h> #include "intel_drv.h" #include <drm/drmP.h> @@ -627,6 +628,10 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe); + + if (HAS_LPE_AUDIO(dev_priv)) + intel_lpe_audio_notify(dev_priv, connector->eld, port, + crtc_state->port_clock, true); } /** @@ -660,6 +665,9 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder) if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify) acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port, (int) pipe); + + if (HAS_LPE_AUDIO(dev_priv)) + intel_lpe_audio_notify(dev_priv, NULL, port, 0, true); } /** diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index fb88e32..02d50e3 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -36,6 +36,7 @@ #include <drm/drm_edid.h> #include "intel_drv.h" #include <drm/i915_drm.h> +#include <drm/intel_lpe_audio.h> #include "i915_drv.h" static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index e12e5f7..a141a9c 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -361,3 +361,49 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } + + +/** + * intel_lpe_audio_notify() - notify lpe audio event + * audio driver and i915 + * @dev_priv: the i915 drm device private data + * @eld : ELD data + * @port: port id + * @tmds_clk_speed: tmds clock frequency in Hz + * @connected: hdmi connected/disconnected + * + * Notify lpe audio driver of eld change. + */ +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, + void *eld, int port, int tmds_clk_speed, + bool connected) +{ + unsigned long irq_flags; + + if (HAS_LPE_AUDIO(dev_priv)) { + struct intel_hdmi_lpe_audio_pdata *pdata = dev_get_platdata( + &(dev_priv->lpe_audio.platdev->dev)); + + spin_lock_irqsave(&pdata->lpe_audio_slock, + irq_flags); + + if (eld != NULL) { + memcpy(pdata->eld.eld_data, eld, + HDMI_MAX_ELD_BYTES); + pdata->eld.port_id = port; + + if (tmds_clk_speed) + pdata->tmds_clock_speed = + tmds_clk_speed; + } + pdata->hdmi_connected = connected; + if (pdata->notify_audio_lpe) + pdata->notify_audio_lpe( + (eld != NULL) ? &pdata->eld : NULL); + else + pdata->notify_pending = true; + + spin_unlock_irqrestore(&pdata->lpe_audio_slock, + irq_flags); + } +} diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h index a64c449..952de05 100644 --- a/include/drm/intel_lpe_audio.h +++ b/include/drm/intel_lpe_audio.h @@ -25,6 +25,7 @@ #define _INTEL_LPE_AUDIO_H_ #include <linux/types.h> +#include <linux/spinlock_types.h> #define HDMI_MAX_ELD_BYTES 128 -- 2.9.3

1 0

[alsa-devel] [RFC PATCH v4 1/7] drm/i915: setup bridge for HDMI LPE audio driver
by Jerome Anand 02 Dec '16

02 Dec '16

Enable support for HDMI LPE audio mode on Baytrail and Cherrytrail when HDaudio controller is not detected Setup minimum required resources during i915_driver_load: 1. Create a platform device to share MMIO/IRQ resources 2. Make the platform device child of i915 device for runtime PM. 3. Create IRQ chip to forward HDMI LPE audio irqs. HDMI LPE audio driver (a standalone sound driver) probes the LPE audio device and creates a new sound card. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand(a)intel.com> --- Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 8 +- drivers/gpu/drm/i915/i915_drv.h | 15 ++ drivers/gpu/drm/i915/i915_irq.c | 27 +++ drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_lpe_audio.c | 363 +++++++++++++++++++++++++++++++++ include/drm/intel_lpe_audio.h | 45 ++++ 8 files changed, 471 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.h diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 117d2ab..a671eee 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -213,6 +213,15 @@ Video BIOS Table (VBT) .. kernel-doc:: drivers/gpu/drm/i915/intel_vbt_defs.h :internal: +intel hdmi lpe audio support +---------------------------- + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :doc: LPE Audio integration for HDMI or DP playback + +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c + :internal: + Memory Management and Command Submission ======================================== diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 580602d..3a2369c 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -126,6 +126,9 @@ i915-y += intel_gvt.o include $(src)/gvt/Makefile endif +# LPE Audio for VLV and CHT +i915-y += intel_lpe_audio.o + obj-$(CONFIG_DRM_I915) += i915.o CFLAGS_i915_trace_points.o := -I$(src) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index b893e67..93811ed 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1144,7 +1144,8 @@ static void i915_driver_register(struct drm_i915_private *dev_priv) if (IS_GEN5(dev_priv)) intel_gpu_ips_init(dev_priv); - i915_audio_component_init(dev_priv); + if (intel_lpe_audio_init(dev_priv) < 0) + i915_audio_component_init(dev_priv); /* * Some ports require correctly set-up hpd registers for detection to @@ -1162,7 +1163,10 @@ static void i915_driver_register(struct drm_i915_private *dev_priv) */ static void i915_driver_unregister(struct drm_i915_private *dev_priv) { - i915_audio_component_cleanup(dev_priv); + if (HAS_LPE_AUDIO(dev_priv)) + intel_lpe_audio_teardown(dev_priv); + else + i915_audio_component_cleanup(dev_priv); intel_gpu_ips_teardown(); acpi_video_unregister(); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 970e50b..2a79048 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2284,6 +2284,12 @@ struct drm_i915_private { /* Used to save the pipe-to-encoder mapping for audio */ struct intel_encoder *av_enc_map[I915_MAX_PIPES]; + /* necessary resource sharing with HDMI LPE audio driver. */ + struct { + struct platform_device *platdev; + int irq; + } lpe_audio; + /* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch * will be rejected. Instead look for a better place. @@ -2773,6 +2779,8 @@ intel_info(const struct drm_i915_private *dev_priv) #define HAS_POOLED_EU(dev_priv) ((dev_priv)->info.has_pooled_eu) +#define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->lpe_audio.platdev != NULL) + #define INTEL_PCH_DEVICE_ID_MASK 0xff00 #define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00 #define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00 @@ -3547,6 +3555,13 @@ extern int i915_restore_state(struct drm_device *dev); void i915_setup_sysfs(struct drm_i915_private *dev_priv); void i915_teardown_sysfs(struct drm_i915_private *dev_priv); +/* i915_lpe_audio.c */ +int intel_lpe_audio_init(struct drm_i915_private *dev_priv); +int intel_lpe_audio_setup(struct drm_i915_private *dev_priv); +void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); +void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); +bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv); + /* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_device *dev); extern void intel_teardown_gmbus(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 07ca71c..6f710da 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1894,6 +1894,14 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg) valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats); /* + * LPE audio interrupts are only enabled on Baytrail and + * CherryView platforms without HDaudio + */ + if (iir & (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT)) + intel_lpe_audio_irq_handler(dev_priv); + + /* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. */ @@ -1974,6 +1982,15 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg) valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats); /* + * LPE audio interrupts are only enabled on Baytrail and + * CherryView platforms without HDaudio + */ + if (iir & (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT | + I915_LPE_PIPE_C_INTERRUPT)) + intel_lpe_audio_irq_handler(dev_priv); + + /* * VLV_IIR is single buffered, and reflects the level * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. */ @@ -2914,6 +2931,7 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) u32 pipestat_mask; u32 enable_mask; enum pipe pipe; + u32 val; pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV | PIPE_CRC_DONE_INTERRUPT_STATUS; @@ -2930,6 +2948,15 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) WARN_ON(dev_priv->irq_mask != ~0); + /* add interrupt masks unconditially here, the actual unmask + * will take place only if the LPE_AUDIO mode is detected + */ + val = (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT | + I915_LPE_PIPE_C_INTERRUPT); + + enable_mask |= val; + dev_priv->irq_mask = ~enable_mask; GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index fcad8fa..6b16ed0 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2395,6 +2395,9 @@ enum skl_disp_power_wells { #define I915_ASLE_INTERRUPT (1<<0) #define I915_BSD_USER_INTERRUPT (1<<25) +#define I915_HDMI_LPE_AUDIO_BASE (VLV_DISPLAY_BASE + 0x65000) +#define I915_HDMI_LPE_AUDIO_SIZE 0x1000 + #define GEN6_BSD_RNCID _MMIO(0x12198) #define GEN7_FF_THREAD_MODE _MMIO(0x20a0) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c new file mode 100644 index 0000000..e12e5f7 --- /dev/null +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -0,0 +1,363 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> + * Jerome Anand <jerome.anand(a)intel.com> + * based on VED patches + * + */ + +/** + * DOC: LPE Audio integration for HDMI or DP playback + * + * Motivation: + * Atom platforms (e.g. valleyview and cherryTrail) integrates a DMA-based + * interface as an alternative to the traditional HDaudio path. While this + * mode is unrelated to the LPE aka SST audio engine, the documentation refers + * to this mode as LPE so we keep this notation for the sake of consistency. + * + * The interface is handled by a separate standalone driver maintained in the + * ALSA subsystem for simplicity. To minimize the interaction between the two + * subsystems, a bridge is setup between the hdmi-lpe-audio and i915: + * 1. Create a platform device to share MMIO/IRQ resources + * 2. Make the platform device child of i915 device for runtime PM. + * 3. Create IRQ chip to forward the LPE audio irqs. + * the hdmi-lpe-audio driver probes the lpe audio device and creates a new + * sound card + * + * Threats: + * Due to the restriction in Linux platform device model, user need manually + * uninstall the hdmi-lpe-audio driver before uninstalling i915 module, + * otherwise we might run into use-after-free issues after i915 removes the + * platform device: even though hdmi-lpe-audio driver is released, the modules + * is still in "installed" status. + * + * Implementation: + * The MMIO/REG platform resources are created according to the registers + * specification. + * When forwarding LPE audio irqs, the flow control handler selection depends + * on the platform, for example on valleyview handle_simple_irq is enough. + * + */ + +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/pci.h> + +#include "i915_drv.h" +#include <linux/delay.h> +#include <drm/intel_lpe_audio.h> + +static struct platform_device* +lpe_audio_platdev_create(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = &dev_priv->drm; + int ret; + struct resource rsc[2] = {}; + struct platform_device *platdev; + u64 *dma_mask; + struct intel_hdmi_lpe_audio_pdata *pdata; + + if (dev_priv->lpe_audio.irq < 0) + return ERR_PTR(-EINVAL); + + platdev = platform_device_alloc("hdmi-lpe-audio", -1); + if (!platdev) { + ret = -ENOMEM; + DRM_ERROR("Failed to allocate LPE audio platform device\n"); + goto err; + } + + /* to work-around check_addr in nommu_map_sg() */ + dma_mask = kmalloc(sizeof(*platdev->dev.dma_mask), GFP_KERNEL); + if (!dma_mask) { + ret = -ENOMEM; + DRM_ERROR("Failed to allocate dma_mask\n"); + goto err_put_dev; + } + *dma_mask = DMA_BIT_MASK(32); + platdev->dev.dma_mask = dma_mask; + platdev->dev.coherent_dma_mask = *dma_mask; + + rsc[0].start = rsc[0].end = dev_priv->lpe_audio.irq; + rsc[0].flags = IORESOURCE_IRQ; + rsc[0].name = "hdmi-lpe-audio-irq"; + + rsc[1].start = pci_resource_start(dev->pdev, 0) + + I915_HDMI_LPE_AUDIO_BASE; + rsc[1].end = pci_resource_start(dev->pdev, 0) + + I915_HDMI_LPE_AUDIO_BASE + I915_HDMI_LPE_AUDIO_SIZE - 1; + rsc[1].flags = IORESOURCE_MEM; + rsc[1].name = "hdmi-lpe-audio-mmio"; + + ret = platform_device_add_resources(platdev, rsc, 2); + if (ret) { + DRM_ERROR("Failed to add resource for platform device: %d\n", + ret); + goto err_put_dev; + } + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + + if (pdata == NULL) { + ret = -ENOMEM; + goto err_put_dev; + } + platdev->dev.platform_data = pdata; + spin_lock_init(&pdata->lpe_audio_slock); + + /* for LPE audio driver's runtime-PM */ + platdev->dev.parent = dev->dev; + ret = platform_device_add(platdev); + if (ret) { + DRM_ERROR("Failed to add LPE audio platform device: %d\n", + ret); + goto err_put_dev; + } + + return platdev; +err_put_dev: + platform_device_put(platdev); + kfree(dma_mask); +err: + return ERR_PTR(ret); +} + +static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv) +{ + platform_device_unregister(dev_priv->lpe_audio.platdev); + kfree(dev_priv->lpe_audio.platdev->dev.dma_mask); +} + +static void lpe_audio_irq_unmask(struct irq_data *d) +{ + struct drm_i915_private *dev_priv = d->chip_data; + unsigned long irqflags; + u32 val = (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT); + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + + /* + * VLV_IER is already set in the vlv_display_postinstall(), + * we only change VLV_IIR and VLV_IMR + */ + dev_priv->irq_mask &= ~val; + I915_WRITE(VLV_IIR, val); + I915_WRITE(VLV_IIR, val); + I915_WRITE(VLV_IMR, dev_priv->irq_mask); + POSTING_READ(VLV_IMR); + + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); +} + +static void lpe_audio_irq_mask(struct irq_data *d) +{ + struct drm_i915_private *dev_priv = d->chip_data; + unsigned long irqflags; + u32 val = (I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT); + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + + /* + * VLV_IER is already set in the vlv_display_postinstall(), + * we only change VLV_IIR and VLV_IMR + */ + dev_priv->irq_mask |= val; + I915_WRITE(VLV_IMR, dev_priv->irq_mask); + I915_WRITE(VLV_IIR, val); + I915_WRITE(VLV_IIR, val); + POSTING_READ(VLV_IIR); + + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); +} + +static struct irq_chip lpe_audio_irqchip = { + .name = "hdmi_lpe_audio_irqchip", + .irq_mask = lpe_audio_irq_mask, + .irq_unmask = lpe_audio_irq_unmask, +}; + +static int lpe_audio_irq_init(struct drm_i915_private *dev_priv) +{ + int irq = dev_priv->lpe_audio.irq; + + WARN_ON(!intel_irqs_enabled(dev_priv)); + irq_set_chip_and_handler_name(irq, + &lpe_audio_irqchip, + handle_simple_irq, + "hdmi_lpe_audio_irq_handler"); + + return irq_set_chip_data(irq, dev_priv); +} + +/** + * intel_lpe_audio_irq_handler() - forwards the LPE audio irq + * @dev_priv: the i915 drm device private data + * + * the LPE Audio irq is forwarded to the irq handler registered by LPE audio + * driver. + */ +void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv) +{ + int ret; + + ret = generic_handle_irq(dev_priv->lpe_audio.irq); + if (ret) + DRM_ERROR_RATELIMITED("error handling LPE audio irq: %d\n", + ret); +} + +/** + * intel_lpe_audio_detect() - check & setup lpe audio if present + * @dev_priv: the i915 drm device private data + * + * Detect if lpe audio is present + * + * Return: true if lpe audio present else Return = false + */ +bool intel_lpe_audio_detect(struct drm_i915_private *dev_priv) +{ + int lpe_present = false; + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + static const struct pci_device_id atom_hdaudio_ids[] = { + /* Baytrail */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0f04)}, + /* Braswell */ + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2284)}, + {} + }; + + if (!pci_dev_present(atom_hdaudio_ids)) { + DRM_INFO("%s%s\n", "HDaudio controller not detected,", + "using LPE audio instead\n"); + lpe_present = true; + } + } + return lpe_present; +} + +/** + * intel_lpe_audio_setup() - setup the bridge between HDMI LPE Audio + * driver and i915 + * @dev_priv: the i915 drm device private data + * + * set up the minimum required resources for the bridge: irq chip, + * platform resource and platform device. i915 device is set as parent + * of the new platform device. + * + * Return: 0 if successful. non-zero if allocation/initialization fails + */ +int intel_lpe_audio_setup(struct drm_i915_private *dev_priv) +{ + int ret; + + dev_priv->lpe_audio.irq = irq_alloc_desc(0); + if (dev_priv->lpe_audio.irq < 0) { + DRM_ERROR("Failed to allocate IRQ desc: %d\n", + dev_priv->lpe_audio.irq); + ret = dev_priv->lpe_audio.irq; + goto err; + } + + DRM_DEBUG("irq = %d\n", dev_priv->lpe_audio.irq); + + ret = lpe_audio_irq_init(dev_priv); + + if (ret) { + DRM_ERROR("Failed to initialize irqchip for lpe audio: %d\n", + ret); + goto err_free_irq; + } + + dev_priv->lpe_audio.platdev = lpe_audio_platdev_create(dev_priv); + + if (IS_ERR(dev_priv->lpe_audio.platdev)) { + ret = PTR_ERR(dev_priv->lpe_audio.platdev); + DRM_ERROR("Failed to create lpe audio platform device: %d\n", + ret); + goto err_free_irq; + } + + return 0; +err_free_irq: + irq_free_desc(dev_priv->lpe_audio.irq); +err: + dev_priv->lpe_audio.irq = -1; + dev_priv->lpe_audio.platdev = NULL; + return ret; +} + + +/** + * intel_lpe_audio_init() - detect and setup the bridge between HDMI LPE Audio + * driver and i915 + * @dev_priv: the i915 drm device private data + * + * Return: 0 if successful. non-zero if detection or + * llocation/initialization fails + */ +int intel_lpe_audio_init(struct drm_i915_private *dev_priv) +{ + int ret = -ENODEV; + + if (intel_lpe_audio_detect(dev_priv)) { + ret = intel_lpe_audio_setup(dev_priv); + if (ret < 0) + DRM_ERROR("failed to setup LPE Audio bridge\n"); + } + return ret; +} + +/** + * intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE + * audio driver and i915 + * @dev_priv: the i915 drm device private data + * + * release all the resources for LPE audio <-> i915 bridge. + */ +void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) +{ + unsigned long irqflags; + struct irq_desc *desc; + + if (!HAS_LPE_AUDIO(dev_priv)) + return; + + desc = irq_to_desc(dev_priv->lpe_audio.irq); + + /** + * mask LPE audio irq before destroying + */ + lpe_audio_irq_mask(&desc->irq_data); + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + + lpe_audio_platdev_destroy(dev_priv); + + irq_free_desc(dev_priv->lpe_audio.irq); + + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); +} diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h new file mode 100644 index 0000000..a64c449 --- /dev/null +++ b/include/drm/intel_lpe_audio.h @@ -0,0 +1,45 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _INTEL_LPE_AUDIO_H_ +#define _INTEL_LPE_AUDIO_H_ + +#include <linux/types.h> + +#define HDMI_MAX_ELD_BYTES 128 + +struct intel_hdmi_lpe_audio_eld { + int port_id; + unsigned char eld_data[HDMI_MAX_ELD_BYTES]; +}; + +struct intel_hdmi_lpe_audio_pdata { + bool notify_pending; + int tmds_clock_speed; + bool hdmi_connected; + struct intel_hdmi_lpe_audio_eld eld; + void (*notify_audio_lpe)(void *audio_ptr); + spinlock_t lpe_audio_slock; +}; + +#endif /* _I915_LPE_AUDIO_H_ */ -- 2.9.3

1 0

[alsa-devel] [RFC PATCH v4 0/7] Add support for Legacy HDMI audio drivers
by Jerome Anand 02 Dec '16

02 Dec '16

Legacy (CherryTrail/ Baytrail) HDMI audio drivers added Legacy hdmi audio-Gfx interaction/ interfacing is updated to use irq chip framework Jerome Anand (7): drm/i915: setup bridge for HDMI LPE audio driver drm/i915: Add support for audio driver notifications ALSA: add shell for Intel HDMI LPE audio driver ALSA: x86: hdmi: Add audio support for BYT and CHT ALSA: x86: hdmi: Improve position reporting ALSA: x86: hdmi: Fixup some monitor ALSA: x86: hdmi: continue playback even when display resolution changes Documentation/gpu/i915.rst | 9 + drivers/gpu/drm/i915/Makefile | 3 + drivers/gpu/drm/i915/i915_drv.c | 8 +- drivers/gpu/drm/i915/i915_drv.h | 18 + drivers/gpu/drm/i915/i915_irq.c | 27 + drivers/gpu/drm/i915/i915_reg.h | 3 + drivers/gpu/drm/i915/intel_audio.c | 8 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lpe_audio.c | 409 +++++++ include/drm/intel_lpe_audio.h | 46 + sound/Kconfig | 2 + sound/Makefile | 2 +- sound/x86/Kconfig | 16 + sound/x86/Makefile | 10 + sound/x86/intel_hdmi_audio.c | 1932 ++++++++++++++++++++++++++++++++ sound/x86/intel_hdmi_audio.h | 201 ++++ sound/x86/intel_hdmi_audio_if.c | 551 +++++++++ sound/x86/intel_hdmi_lpe_audio.c | 626 +++++++++++ sound/x86/intel_hdmi_lpe_audio.h | 692 ++++++++++++ 19 files changed, 4561 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c create mode 100644 include/drm/intel_lpe_audio.h create mode 100644 sound/x86/Kconfig create mode 100644 sound/x86/Makefile create mode 100644 sound/x86/intel_hdmi_audio.c create mode 100644 sound/x86/intel_hdmi_audio.h create mode 100644 sound/x86/intel_hdmi_audio_if.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.c create mode 100644 sound/x86/intel_hdmi_lpe_audio.h -- 2.9.3 base-commit: b34f27e00c9a21d2078062da760e24fd4a620391

1 0

[alsa-devel] [PATCH] ALSA: core: update supported sample rates
by Li Xu 02 Dec '16

02 Dec '16

Add 12KHz, 24KHz, 352.8KHz and 384KHz audio sample rates Signed-off-by: Li Xu <li.xu(a)cirrus.com> --- include/sound/pcm.h | 27 +++++++++++++++++---------- sound/core/pcm_native.c | 7 ++++--- 2 files changed, 21 insertions(+), 13 deletions(-) diff --git a/include/sound/pcm.h b/include/sound/pcm.h index af1fb37..3ce4ad9 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -119,16 +119,20 @@ struct snd_pcm_ops { #define SNDRV_PCM_RATE_5512 (1<<0) /* 5512Hz */ #define SNDRV_PCM_RATE_8000 (1<<1) /* 8000Hz */ #define SNDRV_PCM_RATE_11025 (1<<2) /* 11025Hz */ -#define SNDRV_PCM_RATE_16000 (1<<3) /* 16000Hz */ -#define SNDRV_PCM_RATE_22050 (1<<4) /* 22050Hz */ -#define SNDRV_PCM_RATE_32000 (1<<5) /* 32000Hz */ -#define SNDRV_PCM_RATE_44100 (1<<6) /* 44100Hz */ -#define SNDRV_PCM_RATE_48000 (1<<7) /* 48000Hz */ -#define SNDRV_PCM_RATE_64000 (1<<8) /* 64000Hz */ -#define SNDRV_PCM_RATE_88200 (1<<9) /* 88200Hz */ -#define SNDRV_PCM_RATE_96000 (1<<10) /* 96000Hz */ -#define SNDRV_PCM_RATE_176400 (1<<11) /* 176400Hz */ -#define SNDRV_PCM_RATE_192000 (1<<12) /* 192000Hz */ +#define SNDRV_PCM_RATE_12000 (1<<3) /* 12000Hz */ +#define SNDRV_PCM_RATE_16000 (1<<4) /* 16000Hz */ +#define SNDRV_PCM_RATE_22050 (1<<5) /* 22050Hz */ +#define SNDRV_PCM_RATE_24000 (1<<6) /* 24000Hz */ +#define SNDRV_PCM_RATE_32000 (1<<7) /* 32000Hz */ +#define SNDRV_PCM_RATE_44100 (1<<8) /* 44100Hz */ +#define SNDRV_PCM_RATE_48000 (1<<9) /* 48000Hz */ +#define SNDRV_PCM_RATE_64000 (1<<10) /* 64000Hz */ +#define SNDRV_PCM_RATE_88200 (1<<11) /* 88200Hz */ +#define SNDRV_PCM_RATE_96000 (1<<12) /* 96000Hz */ +#define SNDRV_PCM_RATE_176400 (1<<13) /* 176400Hz */ +#define SNDRV_PCM_RATE_192000 (1<<14) /* 192000Hz */ +#define SNDRV_PCM_RATE_352800 (1<<15) /* 352800Hz */ +#define SNDRV_PCM_RATE_384000 (1<<16) /* 384000Hz */ #define SNDRV_PCM_RATE_CONTINUOUS (1<<30) /* continuous range */ #define SNDRV_PCM_RATE_KNOT (1<<31) /* supports more non-continuos rates */ @@ -141,6 +145,9 @@ struct snd_pcm_ops { SNDRV_PCM_RATE_88200|SNDRV_PCM_RATE_96000) #define SNDRV_PCM_RATE_8000_192000 (SNDRV_PCM_RATE_8000_96000|SNDRV_PCM_RATE_176400|\ SNDRV_PCM_RATE_192000) +#define SNDRV_PCM_RATE_8000_384000 (SNDRV_PCM_RATE_8000_192000|\ + SNDRV_PCM_RATE_384000) + #define _SNDRV_PCM_FMTBIT(fmt) (1ULL << (__force int)SNDRV_PCM_FORMAT_##fmt) #define SNDRV_PCM_FMTBIT_S8 _SNDRV_PCM_FMTBIT(S8) #define SNDRV_PCM_FMTBIT_U8 _SNDRV_PCM_FMTBIT(U8) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 9d33c1e..9bc1011 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1981,12 +1981,13 @@ static int snd_pcm_hw_rule_sample_bits(struct snd_pcm_hw_params *params, return snd_interval_refine(hw_param_interval(params, rule->var), &t); } -#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12 +#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_384000 != 1 << 16 #error "Change this table" #endif -static unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100, - 48000, 64000, 88200, 96000, 176400, 192000 }; +static unsigned int rates[] = { 5512, 8000, 11025, 12000, 16000, 22050, + 24000, 32000, 44100, 48000, 64000, 88200, + 96000, 176400, 192000, 352800, 384000 }; const struct snd_pcm_hw_constraint_list snd_pcm_known_rates = { .count = ARRAY_SIZE(rates), -- 1.9.1

4 4

[alsa-devel] [PATCH v3 0/3] ucm: Add support for component devices
by mengdong.lin＠linux.intel.com 02 Dec '16

02 Dec '16

From: Mengdong Lin <mengdong.lin(a)linux.intel.com> Sound cards are defined by machines. And off-soc codecs and DSPs embedded in DSP can be taken as the components and resued by different machines/ sound cards. This series allows codec and SOC vendors to install UCM configuration files for a specific codec or DSP, and sound card verb files can include these conf files of components. Component devices will not be exposed to applications for backward compatibility. So audio servers like PulseAudio and CRAS still only see the machine devices. History: v2: Use an array to define component directories. Document syntax to enable/disable a component device. Hide cdev defined by the parent device in ucm manager for executing a component sequence. v3: No longer use macros for UCM manager to enter/exit component domain, to make code simpler. Mengdong Lin (3): ucm: Skip component directories when scanning sound card configuration files ucm: Parse sequence of component devices ucm: Execute sequence of component devices src/ucm/main.c | 78 +++++++++++++++++++++++++- src/ucm/parser.c | 154 +++++++++++++++++++++++++++++++++++++++++++++++++++- src/ucm/ucm_local.h | 19 +++++++ src/ucm/utils.c | 1 + 4 files changed, 249 insertions(+), 3 deletions(-) -- 2.7.4

3 5

[alsa-devel] [alsa-utils] alsaucm should come with a man page
by Antonio Ospite 02 Dec '16

02 Dec '16

Hi, I used alsaucm to test mixer use cases for an Intel Baytrail tablet, I wanted to use bare alsa before bringing pulseaudio in, and it took some time to get my head around it. The output from the "alsaucm --help" is too terse, I had to look at the alsa-lib code[1] to see the possible IDENTIFIERs, and even then it was not clear to me that some operations, like for instance "list _devices", can only work after setting a _verb in the same _execution_, for instance this sequence doesn't work: # alsaucm -c bytcr-rt5640 set _verb HiFi # alsaucm -c bytcr-rt5640 list _devices But this command does: # alsaucm -c bytcr-rt5640 -b - <<EOM set _verb HiFi list _devces EOM Now that I know something more it makes sense: UCM just operates on mixer settings, it does not have its own external state. However, my point is that a man page explaining these things can make the life easier to new users. It would be better if alsa/UCM developers wrote the man page, but if no one steps up I guess I could draft a first version myself. Thanks, Antonio [1] http://git.alsa-project.org/?p=alsa-lib.git;a=blob;f=include/use-case.h -- Antonio Ospite http://ao2.it A: Because it messes up the order in which people normally read text. See http://en.wikipedia.org/wiki/Posting_style Q: Why is top-posting such a bad thing?

3 9

[alsa-devel] [PATCH v5 1/2] ASoC: samsung: Add DT bindings documentation for TM2 sound subsystem
by Sylwester Nawrocki 01 Dec '16

01 Dec '16

This patch adds DT binding documentation for Exnos5433 based TM2 and TM2E boards sound subsystem. Signed-off-by: Sylwester Nawrocki <s.nawrocki(a)samsung.com> Acked-by: Rob Herring <robh(a)kernel.org> --- Changes since v4: - indentation changes. Changes since v2: - none. Changes since initial version: - dropped clocks, clock-names properties, instead properties from the CODEC node will be used, - property renames: 'samsung,model' -> 'model', 'samsung,i2s-controller' -> 'i2s-controller', 'samsung,speaker-amplifier' -> 'audio-amplifier', - added 'audio-codec' property. --- .../bindings/sound/samsung,tm2-audio.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt new file mode 100644 index 0000000..94442e5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt @@ -0,0 +1,38 @@ +Samsung Exynos5433 TM2(E) audio complex with WM5110 codec + +Required properties: + + - compatible : "samsung,tm2-audio" + - model : the user-visible name of this sound complex + - audio-codec : the phandle of the wm5110 audio codec node, + as described in ../mfd/arizona.txt + - i2s-controller : the phandle of the I2S controller + - audio-amplifier : the phandle of the MAX98504 amplifier + - samsung,audio-routing : a list of the connections between audio components; + each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source; valid names for sources and sinks are the + WM5110's and MAX98504's pins and the jacks on the + board: HP, SPK, Main Mic, Sub Mic, Third Mic, + Headset Mic + - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator + + +Example: + +sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 0>; + model = "wm5110"; + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + "Main Mic", "MICBIAS2", + "IN1R", "Main Mic"; +}; -- 1.9.1

4 8

[alsa-devel] [PATCH v3 0/3][RFC] ASoC: Component has suspend/resume support
by Kuninori Morimoto 01 Dec '16

01 Dec '16

Hi Mark, Lars-Peter These patches are v3+RFC of Component level suspend/resume support. I'm waiting Vinod's cleanup patch which will remove "codec_dev_list" from Intel drivers. But until then, I would like to get review about v3 patch. This v3 patch-set is still modifing Intel's driver at this point, but final/official v3 patchset will doesn't have it, because it will be based on Vinod's cleanup patch. Kuninori Morimoto (3): ASoC: core: replace codec_dev_list to component_dev_list on Card ASoC: core: replace aux_comp_list to component_dev_list ASoC: add Component level suspend/resume include/sound/soc.h | 16 +++--- sound/soc/intel/boards/broadwell.c | 16 +++--- sound/soc/intel/boards/cht_bsw_rt5672.c | 16 +++--- sound/soc/soc-core.c | 90 ++++++++++++++++++++------------- 4 files changed, 85 insertions(+), 53 deletions(-) -- 1.9.1

2 7

[alsa-devel] [PATCH v4 0/4] ASoC: intel: atom: Add FW version information
by Sebastien Guiriec 01 Dec '16

01 Dec '16

This patch series is adding FW version information of SST. Version is both log as dev_info and sysfs entry. Update since V1: - sysfs entry is set to "FW not yet loaded" in case we do not have loaded the FW once Update since V2: - Add Vinod ack. https://www.spinics.net/lists/alsa-devel/msg56521.html Update since V3: - Add sysfs entry description. Sebastien Guiriec (4): ASoC: intel: atom: Add debug information related to FW version ASoC: Intel: atom: save FW version ASoC: Intel: atom: Add sysfs entry in order to store FW version Documentation: ABI: Add ASoC Intel SST Atom sysfs description Documentation/ABI/testing/sysfs-platform-sst-atom | 18 +++++++++++ sound/soc/intel/atom/sst/sst.c | 39 +++++++++++++++++++++++ sound/soc/intel/atom/sst/sst.h | 1 + sound/soc/intel/atom/sst/sst_ipc.c | 10 +++++- 4 files changed, 67 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/sysfs-platform-sst-atom -- 2.9.3 --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

3 8

[alsa-devel] [PATCH v3 0/2] ALSA controls management using index/device/sub-devices fields
by Arnaud Pouliquen 01 Dec '16

01 Dec '16

V3: I changed "RFC" prefix to "PATCH", hoping that patchset is enough mature in term of code and discussions, to be considered as a potential patch... Previous discussions summary: - topic of the patchset: Patch concerns ASoc DAI drivers. Aim is to be able to instantiate PCM control using device field according to the associated PCM char device. For this, a relationship between DAIs PCM control and PCM char device needs to be establish. => Proposal is to add field in DAI driver struct to declare PCM controls that need to be linked to PCM character device on DAI link probing. - Limitation of the patchset: This patchset seems only a first step as 2 concerns are been highlighted: - Patch is limited to "static" DAI-link. This not responds to backend (no_pcm dai links) and some none-DAI codecs, that could register PCm controls. In theses cases it is not possible to establish relationship during probe. => No solution proposed for time beeing. - This patchset does not fix conflict of 2 "identical" PCM controls declared by 2 drivers. For instance, a conflict can exist between a PCM control created in DAI driver and the same control declared in a codec driver. As index field is forced to 0, prefix should be used in codec. => To discuss solution in a separate thread as issue already present without this patchset several approaches seem possible like using index field ( control auto indexation in ASoC) or prefix in Naming. Changes: - [PATCH v3 1/2] ASoC: core: allow DAI PCM controls bound to PCM device Code optimization based on Takashi Sakamoto suggestion - [RFC V2 3/3] ASoC: hdmi-codec: Example of PCM control bound to PCM device for multi patch suppressed as it was send as example in previous version. Patch is valid but can have impact on existing drivers as control device field value is updated - [PATCH v3 2/2] ASoC: sti: bind pcm controls to pcm device. No change vs V2 V2: http://www.spinics.net/lists/alsa-devel/msg57045.html Aim of this version is to continue discussion on DAI PCM control focused on ASoC drivers. In this V2 implementation in Soc-core is simplified to limit impact on existing code. Update of the RFC V1 based on discussions: - [RFC 4/4] iecset: allow to select control with device and sub-device numbers no more part of the RFC V2, will be discussed in a separate thread - [RFC 2/4] ALSA: control: increment index field for duplicated control. no more part of the RFC V2, no more need as RFC subject is PCM controls - [RFC V2 1/3] ASoC: core: allow DAI PCM controls bound to PCM device Patch reworked from V1 to simplify implementation - Binding is not done for Dai links tagged with no_pcm (DPCM). - no more possibility to add the controls after the DAI link probing. - [RFC V2 2/3] ASoC: sti: bind PCM controls to PCM device. - [RFC V2 3/3] ASoC: hdmi-codec: Example of PCM control bound to PCM device for multi Example of implementation in STI DAI driver and HDMI-codec drivers V1: http://www.spinics.net/lists/alsa-devel/msg56479.html 1) Alsa-utils patch - iecset: allow to select control with device and sub-device numbers This patch allows to access to 2 iec controls differentiated by device/sub-devices numbers => For me, this patch is mandatory to be able to address the ASoC IEC controls, in case of no fix is implemented to allows index field update in ASoC. 2) Alsa driver patches - ASoC: core: allow PCM control binding to PCM device Add relationship between DAIs PCM controls and PCM device. - ALSA: control: increment index field for duplicated control. Generic implementation of the patch proposed in HDA driver (http://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=ea9b…) - ASoC: sti: use bind_pcm_ctl implementation of bind_pcm_ctl for sti driver. Arnaud Pouliquen (2): ASoC: core: allow DAI PCM controls bound to PCM device ASoC: sti: bind pcm controls to pcm device. include/sound/soc-dai.h | 4 ++++ sound/soc/soc-core.c | 28 ++++++++++++++++++++++++++++ sound/soc/sti/sti_uniperif.c | 33 ++++----------------------------- 3 files changed, 36 insertions(+), 29 deletions(-) -- 1.9.1

4 11

[alsa-devel] [PATCH v2 1/1] ALSA: SOC: DMA: access buffer pointer atomically
by Jiada Wang 01 Dec '16

01 Dec '16

From: Andreas Pape <apape(a)de.adit-jv.com> Setting pointer and afterwards check for wrap around leads to the possibility of returning the inconsistent pointer position. This patch accesses buffer pointer atomically to avoid this issue. v2: use READ_ONCE and WRITE_ONCE to ensure read/write of buffer pointer in only one access also updates snd_dmaengine_pcm_pointer_no_residue to ensure atomic access Signed-off-by: Andreas Pape <apape(a)de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang(a)mentor.com> --- sound/core/pcm_dmaengine.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c index 8eb58c7..b6255fd 100644 --- a/sound/core/pcm_dmaengine.c +++ b/sound/core/pcm_dmaengine.c @@ -139,12 +139,14 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_set_config_from_dai_data); static void dmaengine_pcm_dma_complete(void *arg) { + unsigned int new_pos; struct snd_pcm_substream *substream = arg; struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); - prtd->pos += snd_pcm_lib_period_bytes(substream); - if (prtd->pos >= snd_pcm_lib_buffer_bytes(substream)) - prtd->pos = 0; + new_pos = prtd->pos + snd_pcm_lib_period_bytes(substream); + if (new_pos >= snd_pcm_lib_buffer_bytes(substream)) + new_pos = 0; + WRITE_ONCE(prtd->pos, new_pos); snd_pcm_period_elapsed(substream); } @@ -235,7 +237,7 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_trigger); snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream *substream) { struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); - return bytes_to_frames(substream->runtime, prtd->pos); + return bytes_to_frames(substream->runtime, READ_ONCE(prtd->pos)); } EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_pointer_no_residue); -- 2.9.3

2 1

[alsa-devel] [PATCH 39/39] Annotate hardware config module parameters in sound/pci/
by David Howells 01 Dec '16

01 Dec '16

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in sound/pci/. Suggested-by: One Thousand Gnomes <gnomes(a)lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells(a)redhat.com> cc: Jaroslav Kysela <perex(a)perex.cz> cc: Takashi Iwai <tiwai(a)suse.com> cc: alsa-devel(a)alsa-project.org --- sound/pci/als4000.c | 2 +- sound/pci/cmipci.c | 6 +++--- sound/pci/ens1370.c | 2 +- sound/pci/riptide/riptide.c | 6 +++--- sound/pci/sonicvibes.c | 2 +- sound/pci/via82xx.c | 2 +- sound/pci/ymfpci/ymfpci.c | 6 +++--- 7 files changed, 13 insertions(+), 13 deletions(-) diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c index edabe1371660..e17d1742057d 100644 --- a/sound/pci/als4000.c +++ b/sound/pci/als4000.c @@ -102,7 +102,7 @@ MODULE_PARM_DESC(id, "ID string for ALS4000 soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable ALS4000 soundcard."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address for ALS4000 soundcard. (0 = disabled)"); #endif diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index 73f593526b2d..8a217752a5f8 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -68,14 +68,14 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for C-Media PCI soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable C-Media PCI soundcard."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port."); module_param_array(soft_ac3, bool, NULL, 0444); MODULE_PARM_DESC(soft_ac3, "Software-conversion of raw SPDIF packets (model 033 only)."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address."); #endif diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 7e760fed0728..cdb3637a2bb1 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -106,7 +106,7 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Ensoniq AudioPCI soundcard."); #ifdef SUPPORT_JOYSTICK #ifdef CHIP1371 -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address."); #else module_param_array(joystick, bool, NULL, 0444); diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index ada5f01d479c..8b39f03f2144 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -137,12 +137,12 @@ MODULE_PARM_DESC(id, "ID string for Riptide soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Riptide soundcard."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port # for Riptide soundcard."); #endif -module_param_array(mpu_port, int, NULL, 0444); +module_param_hw_array(mpu_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU401 port # for Riptide driver."); -module_param_array(opl3_port, int, NULL, 0444); +module_param_hw_array(opl3_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(opl3_port, "OPL3 port # for Riptide driver."); /* diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index e1a13870bb80..01ace45d9405 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -66,7 +66,7 @@ module_param_array(reverb, bool, NULL, 0444); MODULE_PARM_DESC(reverb, "Enable reverb (SRAM is present) for S3 SonicVibes soundcard."); module_param_array(mge, bool, NULL, 0444); MODULE_PARM_DESC(mge, "MIC Gain Enable for S3 SonicVibes soundcard."); -module_param(dmaio, uint, 0444); +module_param_hw(dmaio, uint, ioport, 0444); MODULE_PARM_DESC(dmaio, "DDMA i/o base address for S3 SonicVibes soundcard."); /* diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 38a17b4342a6..2dc8f1a86aa2 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -92,7 +92,7 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for VIA 82xx bridge."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for VIA 82xx bridge."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port. (VT82C686x only)"); #ifdef SUPPORT_JOYSTICK module_param(joystick, bool, 0444); diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 812e27a1bcbc..4faf3e1ed06a 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -55,12 +55,12 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for the Yamaha DS-1 PCI soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Yamaha DS-1 soundcard."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 Port."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM OPL-3 Port."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, long, NULL, 0444); +module_param_hw_array(joystick_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address"); #endif module_param_array(rear_switch, bool, NULL, 0444);

1 0

[alsa-devel] [PATCH 38/39] Annotate hardware config module parameters in sound/oss/
by David Howells 01 Dec '16

01 Dec '16

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in sound/oss/. Suggested-by: One Thousand Gnomes <gnomes(a)lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells(a)redhat.com> cc: Jaroslav Kysela <perex(a)perex.cz> cc: Takashi Iwai <tiwai(a)suse.com> cc: Riccardo Facchetti <fizban(a)tin.it> cc: Andrew Veliath <andrewtv(a)usa.net> cc: alsa-devel(a)alsa-project.org --- sound/oss/ad1848.c | 8 ++++---- sound/oss/aedsp16.c | 12 ++++++------ sound/oss/mpu401.c | 4 ++-- sound/oss/msnd_pinnacle.c | 20 ++++++++++---------- sound/oss/opl3.c | 2 +- sound/oss/pas2_card.c | 18 +++++++++--------- sound/oss/pss.c | 14 +++++++------- sound/oss/sb_card.c | 10 +++++----- sound/oss/trix.c | 18 +++++++++--------- sound/oss/uart401.c | 4 ++-- sound/oss/uart6850.c | 4 ++-- sound/oss/waveartist.c | 8 ++++---- 12 files changed, 61 insertions(+), 61 deletions(-) diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c index 6368e5c7d0ba..6cae59c4e3c4 100644 --- a/sound/oss/ad1848.c +++ b/sound/oss/ad1848.c @@ -2810,10 +2810,10 @@ static int __initdata dma = -1; static int __initdata dma2 = -1; static int __initdata type = 0; -module_param(io, int, 0); /* I/O for a raw AD1848 card */ -module_param(irq, int, 0); /* IRQ to use */ -module_param(dma, int, 0); /* First DMA channel */ -module_param(dma2, int, 0); /* Second DMA channel */ +module_param_hw(io, int, ioport, 0); /* I/O for a raw AD1848 card */ +module_param_hw(irq, int, irq, 0); /* IRQ to use */ +module_param_hw(dma, int, dma, 0); /* First DMA channel */ +module_param_hw(dma2, int, dma, 0); /* Second DMA channel */ module_param(type, int, 0); /* Card type */ module_param(deskpro_xl, bool, 0); /* Special magic for Deskpro XL boxen */ module_param(deskpro_m, bool, 0); /* Special magic for Deskpro M box */ diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c index bb477d5c8528..f058ed6bdb69 100644 --- a/sound/oss/aedsp16.c +++ b/sound/oss/aedsp16.c @@ -1303,17 +1303,17 @@ static int __initdata mpu_irq = -1; static int __initdata mss_base = -1; static int __initdata mpu_base = -1; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)"); -module_param(dma, int, 0); +module_param_hw(dma, int, dma, 0); MODULE_PARM_DESC(dma, "dma line (0 1 3)"); -module_param(mpu_irq, int, 0); +module_param_hw(mpu_irq, int, irq, 0); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)"); -module_param(mss_base, int, 0); +module_param_hw(mss_base, int, ioport, 0); MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)"); -module_param(mpu_base, int, 0); +module_param_hw(mpu_base, int, ioport, 0); MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)"); MODULE_AUTHOR("Riccardo Facchetti <fizban(a)tin.it>"); MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION); diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c index 862735005b43..20e8fa46f647 100644 --- a/sound/oss/mpu401.c +++ b/sound/oss/mpu401.c @@ -1748,8 +1748,8 @@ static struct address_info cfg; static int io = -1; static int irq = -1; -module_param(irq, int, 0); -module_param(io, int, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(io, int, ioport, 0); static int __init init_mpu401(void) { diff --git a/sound/oss/msnd_pinnacle.c b/sound/oss/msnd_pinnacle.c index a8bb4a06ba6f..8e5221d15066 100644 --- a/sound/oss/msnd_pinnacle.c +++ b/sound/oss/msnd_pinnacle.c @@ -1725,22 +1725,22 @@ static int calibrate_signal __initdata = CONFIG_MSND_CALSIGNAL; #endif /* MODULE */ -module_param (io, int, 0); -module_param (irq, int, 0); -module_param (mem, int, 0); +module_param_hw (io, int, ioport, 0); +module_param_hw (irq, int, irq, 0); +module_param_hw (mem, int, iomem, 0); module_param (write_ndelay, int, 0); module_param (fifosize, int, 0); module_param (calibrate_signal, int, 0); #ifndef MSND_CLASSIC module_param (digital, bool, 0); -module_param (cfg, int, 0); +module_param_hw (cfg, int, ioport, 0); module_param (reset, int, 0); -module_param (mpu_io, int, 0); -module_param (mpu_irq, int, 0); -module_param (ide_io0, int, 0); -module_param (ide_io1, int, 0); -module_param (ide_irq, int, 0); -module_param (joystick_io, int, 0); +module_param_hw (mpu_io, int, ioport, 0); +module_param_hw (mpu_irq, int, irq, 0); +module_param_hw (ide_io0, int, ioport, 0); +module_param_hw (ide_io1, int, ioport, 0); +module_param_hw (ide_irq, int, irq, 0); +module_param_hw (joystick_io, int, ioport, 0); #endif static int __init msnd_init(void) diff --git a/sound/oss/opl3.c b/sound/oss/opl3.c index b6d19adf8f41..f0f5b5be6314 100644 --- a/sound/oss/opl3.c +++ b/sound/oss/opl3.c @@ -1200,7 +1200,7 @@ static int me; static int io = -1; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); static int __init init_opl3 (void) { diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c index b07954a79536..769fca692d2a 100644 --- a/sound/oss/pas2_card.c +++ b/sound/oss/pas2_card.c @@ -383,15 +383,15 @@ static int __initdata sb_irq = -1; static int __initdata sb_dma = -1; static int __initdata sb_dma16 = -1; -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); -module_param(dma16, int, 0); - -module_param(sb_io, int, 0); -module_param(sb_irq, int, 0); -module_param(sb_dma, int, 0); -module_param(sb_dma16, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); +module_param_hw(dma16, int, dma, 0); + +module_param_hw(sb_io, int, ioport, 0); +module_param_hw(sb_irq, int, irq, 0); +module_param_hw(sb_dma, int, dma, 0); +module_param_hw(sb_dma16, int, dma, 0); module_param(joystick, bool, 0); module_param(symphony, bool, 0); diff --git a/sound/oss/pss.c b/sound/oss/pss.c index 81314f9e2ccb..33c3a442e162 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -1139,19 +1139,19 @@ static bool pss_no_sound = 0; /* Just configure non-sound components */ static bool pss_keep_settings = 1; /* Keep hardware settings at module exit */ static char *pss_firmware = "/etc/sound/pss_synth"; -module_param(pss_io, int, 0); +module_param_hw(pss_io, int, ioport, 0); MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)"); -module_param(mss_io, int, 0); +module_param_hw(mss_io, int, ioport, 0); MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)"); -module_param(mss_irq, int, 0); +module_param_hw(mss_irq, int, irq, 0); MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param(mss_dma, int, 0); +module_param_hw(mss_dma, int, dma, 0); MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)"); -module_param(mpu_io, int, 0); +module_param_hw(mpu_io, int, ioport, 0); MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)"); -module_param(mpu_irq, int, 0); +module_param_hw(mpu_irq, int, irq, 0); MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param(pss_cdrom_port, int, 0); +module_param_hw(pss_cdrom_port, int, ioport, 0); MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)"); module_param(pss_enable_joystick, bool, 0); MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)"); diff --git a/sound/oss/sb_card.c b/sound/oss/sb_card.c index fb5d7250de38..2a92cfe6cfe9 100644 --- a/sound/oss/sb_card.c +++ b/sound/oss/sb_card.c @@ -61,15 +61,15 @@ static int __initdata uart401 = 0; static int __initdata pnp = 0; #endif -module_param(io, int, 000); +module_param_hw(io, int, ioport, 000); MODULE_PARM_DESC(io, "Soundblaster i/o base address (0x220,0x240,0x260,0x280)"); -module_param(irq, int, 000); +module_param_hw(irq, int, irq, 000); MODULE_PARM_DESC(irq, "IRQ (5,7,9,10)"); -module_param(dma, int, 000); +module_param_hw(dma, int, dma, 000); MODULE_PARM_DESC(dma, "8-bit DMA channel (0,1,3)"); -module_param(dma16, int, 000); +module_param_hw(dma16, int, dma, 000); MODULE_PARM_DESC(dma16, "16-bit DMA channel (5,6,7)"); -module_param(mpu_io, int, 000); +module_param_hw(mpu_io, int, ioport, 000); MODULE_PARM_DESC(mpu_io, "MPU base address"); module_param(type, int, 000); MODULE_PARM_DESC(type, "You can set this to specific card type (doesn't " \ diff --git a/sound/oss/trix.c b/sound/oss/trix.c index 3c494dc93b93..a57bc635d758 100644 --- a/sound/oss/trix.c +++ b/sound/oss/trix.c @@ -413,15 +413,15 @@ static int __initdata sb_irq = -1; static int __initdata mpu_io = -1; static int __initdata mpu_irq = -1; -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); -module_param(dma2, int, 0); -module_param(sb_io, int, 0); -module_param(sb_dma, int, 0); -module_param(sb_irq, int, 0); -module_param(mpu_io, int, 0); -module_param(mpu_irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); +module_param_hw(dma2, int, dma, 0); +module_param_hw(sb_io, int, ioport, 0); +module_param_hw(sb_dma, int, dma, 0); +module_param_hw(sb_irq, int, irq, 0); +module_param_hw(mpu_io, int, ioport, 0); +module_param_hw(mpu_irq, int, irq, 0); module_param(joystick, bool, 0); static int __init init_trix(void) diff --git a/sound/oss/uart401.c b/sound/oss/uart401.c index dae4d4344407..83dcc85b8688 100644 --- a/sound/oss/uart401.c +++ b/sound/oss/uart401.c @@ -429,8 +429,8 @@ static struct address_info cfg_mpu; static int io = -1; static int irq = -1; -module_param(io, int, 0444); -module_param(irq, int, 0444); +module_param_hw(io, int, ioport, 0444); +module_param_hw(irq, int, irq, 0444); static int __init init_uart401(void) diff --git a/sound/oss/uart6850.c b/sound/oss/uart6850.c index 1079133dd6ab..eda32d7eddbd 100644 --- a/sound/oss/uart6850.c +++ b/sound/oss/uart6850.c @@ -315,8 +315,8 @@ static struct address_info cfg_mpu; static int __initdata io = -1; static int __initdata irq = -1; -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); static int __init init_uart6850(void) { diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index 0b8d0de87273..4f0c3a232e41 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -2036,8 +2036,8 @@ __setup("waveartist=", setup_waveartist); #endif MODULE_DESCRIPTION("Rockwell WaveArtist RWA-010 sound driver"); -module_param(io, int, 0); /* IO base */ -module_param(irq, int, 0); /* IRQ */ -module_param(dma, int, 0); /* DMA */ -module_param(dma2, int, 0); /* DMA2 */ +module_param_hw(io, int, ioport, 0); /* IO base */ +module_param_hw(irq, int, irq, 0); /* IRQ */ +module_param_hw(dma, int, dma, 0); /* DMA */ +module_param_hw(dma2, int, dma, 0); /* DMA2 */ MODULE_LICENSE("GPL");

1 0

[alsa-devel] [PATCH 37/39] Annotate hardware config module parameters in sound/isa/
by David Howells 01 Dec '16

01 Dec '16

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in sound/isa/. Suggested-by: One Thousand Gnomes <gnomes(a)lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells(a)redhat.com> cc: Jaroslav Kysela <perex(a)perex.cz> cc: Takashi Iwai <tiwai(a)suse.com> cc: alsa-devel(a)alsa-project.org --- sound/isa/ad1848/ad1848.c | 6 +++--- sound/isa/adlib.c | 2 +- sound/isa/cmi8328.c | 12 ++++++------ sound/isa/cmi8330.c | 20 ++++++++++---------- sound/isa/cs423x/cs4231.c | 12 ++++++------ sound/isa/cs423x/cs4236.c | 18 +++++++++--------- sound/isa/es1688/es1688.c | 12 ++++++------ sound/isa/es18xx.c | 12 ++++++------ sound/isa/galaxy/galaxy.c | 16 ++++++++-------- sound/isa/gus/gusclassic.c | 8 ++++---- sound/isa/gus/gusextreme.c | 16 ++++++++-------- sound/isa/gus/gusmax.c | 8 ++++---- sound/isa/gus/interwave.c | 10 +++++----- sound/isa/msnd/msnd_pinnacle.c | 20 ++++++++++---------- sound/isa/opl3sa2.c | 16 ++++++++-------- sound/isa/opti9xx/miro.c | 14 +++++++------- sound/isa/opti9xx/opti92x-ad1848.c | 14 +++++++------- sound/isa/sb/jazz16.c | 12 ++++++------ sound/isa/sb/sb16.c | 14 +++++++------- sound/isa/sb/sb8.c | 6 +++--- sound/isa/sc6000.c | 12 ++++++------ sound/isa/sscape.c | 12 ++++++------ sound/isa/wavefront/wavefront.c | 18 +++++++++--------- 23 files changed, 145 insertions(+), 145 deletions(-) diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c index a302d1f8d14f..e739b1c85c25 100644 --- a/sound/isa/ad1848/ad1848.c +++ b/sound/isa/ad1848/ad1848.c @@ -55,11 +55,11 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); module_param_array(thinkpad, bool, NULL, 0444); MODULE_PARM_DESC(thinkpad, "Enable only for the onboard CS4248 of IBM Thinkpad 360/750/755 series."); diff --git a/sound/isa/adlib.c b/sound/isa/adlib.c index 8d3060fd7ad7..5fb619eca5c8 100644 --- a/sound/isa/adlib.c +++ b/sound/isa/adlib.c @@ -27,7 +27,7 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); static int snd_adlib_match(struct device *dev, unsigned int n) diff --git a/sound/isa/cmi8328.c b/sound/isa/cmi8328.c index 787475084f46..8e1756c3b9bb 100644 --- a/sound/isa/cmi8328.c +++ b/sound/isa/cmi8328.c @@ -51,18 +51,18 @@ MODULE_PARM_DESC(index, "Index value for CMI8328 soundcard."); module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for CMI8328 soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for CMI8328 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for CMI8328 driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 for CMI8328 driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 for CMI8328 driver."); -module_param_array(mpuport, long, NULL, 0444); +module_param_hw_array(mpuport, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8328 driver."); -module_param_array(mpuirq, int, NULL, 0444); +module_param_hw_array(mpuirq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8328 MPU-401 port."); #ifdef SUPPORT_JOYSTICK module_param_array(gameport, bool, NULL, 0444); diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index dfedfd85f205..f64b29ab5cc7 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -95,27 +95,27 @@ module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(sbport, long, NULL, 0444); +module_param_hw_array(sbport, long, ioport, NULL, 0444); MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver."); -module_param_array(sbirq, int, NULL, 0444); +module_param_hw_array(sbirq, int, irq, NULL, 0444); MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver."); -module_param_array(sbdma8, int, NULL, 0444); +module_param_hw_array(sbdma8, int, dma, NULL, 0444); MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver."); -module_param_array(sbdma16, int, NULL, 0444); +module_param_hw_array(sbdma16, int, dma, NULL, 0444); MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver."); -module_param_array(wssport, long, NULL, 0444); +module_param_hw_array(wssport, long, ioport, NULL, 0444); MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver."); -module_param_array(wssirq, int, NULL, 0444); +module_param_hw_array(wssirq, int, irq, NULL, 0444); MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver."); -module_param_array(wssdma, int, NULL, 0444); +module_param_hw_array(wssdma, int, dma, NULL, 0444); MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver."); -module_param_array(fmport, long, NULL, 0444); +module_param_hw_array(fmport, long, ioport, NULL, 0444); MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver."); -module_param_array(mpuport, long, NULL, 0444); +module_param_hw_array(mpuport, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver."); -module_param_array(mpuirq, int, NULL, 0444); +module_param_hw_array(mpuirq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port."); #ifdef CONFIG_PNP static int isa_registered; diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c index ef7448e9f813..e8edd9017a2f 100644 --- a/sound/isa/cs423x/cs4231.c +++ b/sound/isa/cs423x/cs4231.c @@ -55,17 +55,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver."); static int snd_cs4231_match(struct device *dev, unsigned int n) diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index 9d7582c90a95..1f9a3b2be7a1 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -98,23 +98,23 @@ MODULE_PARM_DESC(enable, "Enable " IDENT " soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " IDENT " driver."); -module_param_array(cport, long, NULL, 0444); +module_param_hw_array(cport, long, ioport, NULL, 0444); MODULE_PARM_DESC(cport, "Control port # for " IDENT " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " IDENT " driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for " IDENT " driver."); -module_param_array(sb_port, long, NULL, 0444); +module_param_hw_array(sb_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(sb_port, "SB port # for " IDENT " driver (optional)."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " IDENT " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " IDENT " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " IDENT " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index 1901c2bb6c3b..36320e7f2789 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -71,17 +71,17 @@ module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for ES1688 driver."); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 5094b62d8f77..0cabe2b8974f 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -1999,17 +1999,17 @@ MODULE_PARM_DESC(enable, "Enable ES18xx soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for ES18xx driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for ES18xx driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for ES18xx driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for ES18xx driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA 1 # for ES18xx driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA 2 # for ES18xx driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/galaxy/galaxy.c b/sound/isa/galaxy/galaxy.c index 379abe2cbeb2..b9994cc9f5fb 100644 --- a/sound/isa/galaxy/galaxy.c +++ b/sound/isa/galaxy/galaxy.c @@ -53,21 +53,21 @@ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "Playback DMA # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "Capture DMA # for " CRD_NAME " driver."); /* diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c index c169be49ed71..92a997ab1229 100644 --- a/sound/isa/gus/gusclassic.c +++ b/sound/isa/gus/gusclassic.c @@ -58,13 +58,13 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver."); diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c index 77ac2fd723b4..beb52c0f70ea 100644 --- a/sound/isa/gus/gusextreme.c +++ b/sound/isa/gus/gusextreme.c @@ -66,21 +66,21 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(gf1_port, long, NULL, 0444); +module_param_hw_array(gf1_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(gf1_port, "GF1 port # for " CRD_NAME " driver (optional)."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(gf1_irq, int, NULL, 0444); +module_param_hw_array(gf1_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(gf1_irq, "GF1 IRQ # for " CRD_NAME " driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "GF1 DMA # for " CRD_NAME " driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver."); diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c index dd88c9d33492..63309a453140 100644 --- a/sound/isa/gus/gusmax.c +++ b/sound/isa/gus/gusmax.c @@ -56,13 +56,13 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for GUS MAX soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable GUS MAX soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for GUS MAX driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for GUS MAX driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for GUS MAX driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for GUS MAX driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for GUS MAX driver."); diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c index 70d0040484c8..0687b7ef3e53 100644 --- a/sound/isa/gus/interwave.c +++ b/sound/isa/gus/interwave.c @@ -92,17 +92,17 @@ MODULE_PARM_DESC(enable, "Enable InterWave soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for InterWave driver."); #ifdef SNDRV_STB -module_param_array(port_tc, long, NULL, 0444); +module_param_hw_array(port_tc, long, ioport, NULL, 0444); MODULE_PARM_DESC(port_tc, "Tone control (TEA6330T - i2c bus) port # for InterWave driver."); #endif -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for InterWave driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for InterWave driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for InterWave driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for InterWave driver."); diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c index 4c072666115d..ad4897337df5 100644 --- a/sound/isa/msnd/msnd_pinnacle.c +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -800,22 +800,22 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE(INITCODEFILE); MODULE_FIRMWARE(PERMCODEFILE); -module_param_array(io, long, NULL, S_IRUGO); +module_param_hw_array(io, long, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(io, "IO port #"); -module_param_array(irq, int, NULL, S_IRUGO); -module_param_array(mem, long, NULL, S_IRUGO); +module_param_hw_array(irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(mem, long, iomem, NULL, S_IRUGO); module_param_array(write_ndelay, int, NULL, S_IRUGO); module_param(calibrate_signal, int, S_IRUGO); #ifndef MSND_CLASSIC module_param_array(digital, int, NULL, S_IRUGO); -module_param_array(cfg, long, NULL, S_IRUGO); +module_param_hw_array(cfg, long, ioport, NULL, S_IRUGO); module_param_array(reset, int, 0, S_IRUGO); -module_param_array(mpu_io, long, NULL, S_IRUGO); -module_param_array(mpu_irq, int, NULL, S_IRUGO); -module_param_array(ide_io0, long, NULL, S_IRUGO); -module_param_array(ide_io1, long, NULL, S_IRUGO); -module_param_array(ide_irq, int, NULL, S_IRUGO); -module_param_array(joystick_io, long, NULL, S_IRUGO); +module_param_hw_array(mpu_io, long, ioport, NULL, S_IRUGO); +module_param_hw_array(mpu_irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(ide_io0, long, ioport, NULL, S_IRUGO); +module_param_hw_array(ide_io1, long, ioport, NULL, S_IRUGO); +module_param_hw_array(ide_irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(joystick_io, long, ioport, NULL, S_IRUGO); #endif diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index ae133633a420..4098e3e0353d 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -69,21 +69,21 @@ MODULE_PARM_DESC(enable, "Enable OPL3-SA soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for OPL3-SA driver."); -module_param_array(sb_port, long, NULL, 0444); +module_param_hw_array(sb_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(sb_port, "SB port # for OPL3-SA driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS port # for OPL3-SA driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for OPL3-SA driver."); -module_param_array(midi_port, long, NULL, 0444); +module_param_hw_array(midi_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(midi_port, "MIDI port # for OPL3-SA driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for OPL3-SA driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for OPL3-SA driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for OPL3-SA driver."); module_param_array(opl3sa3_ymode, int, NULL, 0444); MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi."); diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c index 3a9067db1a84..bcbff56f060d 100644 --- a/sound/isa/opti9xx/miro.c +++ b/sound/isa/opti9xx/miro.c @@ -69,19 +69,19 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for miro soundcard."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for miro soundcard."); -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "WSS port # for miro driver."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for miro driver."); -module_param(fm_port, long, 0444); +module_param_hw(fm_port, long, ioport, 0444); MODULE_PARM_DESC(fm_port, "FM Port # for miro driver."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "WSS irq # for miro driver."); -module_param(mpu_irq, int, 0444); +module_param_hw(mpu_irq, int, irq, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for miro driver."); -module_param(dma1, int, 0444); +module_param_hw(dma1, int, dma, 0444); MODULE_PARM_DESC(dma1, "1st dma # for miro driver."); -module_param(dma2, int, 0444); +module_param_hw(dma2, int, dma, 0444); MODULE_PARM_DESC(dma2, "2nd dma # for miro driver."); module_param(wss, int, 0444); MODULE_PARM_DESC(wss, "wss mode"); diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 0a5266003786..ceddb392b1e3 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -88,20 +88,20 @@ MODULE_PARM_DESC(id, "ID string for opti9xx based soundcard."); module_param(isapnp, bool, 0444); MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard."); #endif -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "WSS port # for opti9xx driver."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for opti9xx driver."); -module_param(fm_port, long, 0444); +module_param_hw(fm_port, long, ioport, 0444); MODULE_PARM_DESC(fm_port, "FM port # for opti9xx driver."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "WSS irq # for opti9xx driver."); -module_param(mpu_irq, int, 0444); +module_param_hw(mpu_irq, int, irq, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for opti9xx driver."); -module_param(dma1, int, 0444); +module_param_hw(dma1, int, dma, 0444); MODULE_PARM_DESC(dma1, "1st dma # for opti9xx driver."); #if defined(CS4231) || defined(OPTi93X) -module_param(dma2, int, 0444); +module_param_hw(dma2, int, dma, 0444); MODULE_PARM_DESC(dma2, "2nd dma # for opti9xx driver."); #endif /* CS4231 || OPTi93X */ diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c index 4d909971eedb..bfa0055e1fd6 100644 --- a/sound/isa/sb/jazz16.c +++ b/sound/isa/sb/jazz16.c @@ -50,17 +50,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Media Vision Jazz16 based soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Media Vision Jazz16 based soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for jazz16 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for jazz16 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for jazz16 driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for jazz16 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "DMA8 # for jazz16 driver."); -module_param_array(dma16, int, NULL, 0444); +module_param_hw_array(dma16, int, dma, NULL, 0444); MODULE_PARM_DESC(dma16, "DMA16 # for jazz16 driver."); #define SB_JAZZ16_WAKEUP 0xaf diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c index 4a7d7c89808f..3b2e4f405ff2 100644 --- a/sound/isa/sb/sb16.c +++ b/sound/isa/sb/sb16.c @@ -99,21 +99,21 @@ MODULE_PARM_DESC(enable, "Enable SoundBlaster 16 soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SB16 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for SB16 driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for SB16 PnP driver."); #ifdef SNDRV_SBAWE_EMU8000 -module_param_array(awe_port, long, NULL, 0444); +module_param_hw_array(awe_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(awe_port, "AWE port # for SB16 PnP driver."); #endif -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SB16 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for SB16 driver."); -module_param_array(dma16, int, NULL, 0444); +module_param_hw_array(dma16, int, dma, NULL, 0444); MODULE_PARM_DESC(dma16, "16-bit DMA # for SB16 driver."); module_param_array(mic_agc, int, NULL, 0444); MODULE_PARM_DESC(mic_agc, "Mic Auto-Gain-Control switch."); diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c index ad42d2364199..d77dcba276b5 100644 --- a/sound/isa/sb/sb8.c +++ b/sound/isa/sb/sb8.c @@ -47,11 +47,11 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Sound Blaster soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Sound Blaster soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SB8 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SB8 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for SB8 driver."); struct snd_sb8 { diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c index b61a6633d8f2..c09d9b914efe 100644 --- a/sound/isa/sc6000.c +++ b/sound/isa/sc6000.c @@ -64,17 +64,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for sc-6000 based soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable sc-6000 based soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for sc-6000 driver."); -module_param_array(mss_port, long, NULL, 0444); +module_param_hw_array(mss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mss_port, "MSS Port # for sc-6000 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for sc-6000 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for sc-6000 driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver."); -module_param_array(dma, int, NULL, 0444); +module_param_hw_array(dma, int, dma, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver."); module_param_array(joystick, bool, NULL, 0444); MODULE_PARM_DESC(joystick, "Enable gameport."); diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index fdcfa29e2205..54f5758a1bb3 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -63,22 +63,22 @@ MODULE_PARM_DESC(index, "Index number for SoundScape soundcard"); module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "Description for SoundScape card"); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SoundScape driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver."); -module_param_array(dma, int, NULL, 0444); +module_param_hw_array(dma, int, dma, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver."); module_param_array(joystick, bool, NULL, 0444); diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index a0987a57c8a9..da4e9a85f0af 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -63,23 +63,23 @@ MODULE_PARM_DESC(enable, "Enable WaveFront soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for WaveFront soundcards."); #endif -module_param_array(cs4232_pcm_port, long, NULL, 0444); +module_param_hw_array(cs4232_pcm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(cs4232_pcm_port, "Port # for CS4232 PCM interface."); -module_param_array(cs4232_pcm_irq, int, NULL, 0444); +module_param_hw_array(cs4232_pcm_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(cs4232_pcm_irq, "IRQ # for CS4232 PCM interface."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for CS4232 PCM interface."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for CS4232 PCM interface."); -module_param_array(cs4232_mpu_port, long, NULL, 0444); +module_param_hw_array(cs4232_mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(cs4232_mpu_port, "port # for CS4232 MPU-401 interface."); -module_param_array(cs4232_mpu_irq, int, NULL, 0444); +module_param_hw_array(cs4232_mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(cs4232_mpu_irq, "IRQ # for CS4232 MPU-401 interface."); -module_param_array(ics2115_irq, int, NULL, 0444); +module_param_hw_array(ics2115_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(ics2115_irq, "IRQ # for ICS2115."); -module_param_array(ics2115_port, long, NULL, 0444); +module_param_hw_array(ics2115_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(ics2115_port, "Port # for ICS2115."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port #."); module_param_array(use_cs4232_midi, bool, NULL, 0444); MODULE_PARM_DESC(use_cs4232_midi, "Use CS4232 MPU-401 interface (inaccessibly located inside your computer)");

1 0

[alsa-devel] [PATCH 36/39] Annotate hardware config module parameters in sound/drivers/
by David Howells 01 Dec '16

01 Dec '16

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in sound/drivers/. Suggested-by: One Thousand Gnomes <gnomes(a)lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells(a)redhat.com> cc: Jaroslav Kysela <perex(a)perex.cz> cc: Takashi Iwai <tiwai(a)suse.com> cc: alsa-devel(a)alsa-project.org --- sound/drivers/mpu401/mpu401.c | 4 ++-- sound/drivers/mtpav.c | 4 ++-- sound/drivers/serial-u16550.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c index fed7e7e2177b..9b86e00d7d95 100644 --- a/sound/drivers/mpu401/mpu401.c +++ b/sound/drivers/mpu401/mpu401.c @@ -53,9 +53,9 @@ MODULE_PARM_DESC(enable, "Enable MPU-401 device."); module_param_array(pnp, bool, NULL, 0444); MODULE_PARM_DESC(pnp, "PnP detection for MPU-401 device."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for MPU-401 device."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device."); module_param_array(uart_enter, bool, NULL, 0444); MODULE_PARM_DESC(uart_enter, "Issue UART_ENTER command at open."); diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c index 30e8a1d5bc87..c6bab7cf4fe7 100644 --- a/sound/drivers/mtpav.c +++ b/sound/drivers/mtpav.c @@ -86,9 +86,9 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for MotuMTPAV MIDI."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for MotuMTPAV MIDI."); -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "Parallel port # for MotuMTPAV MIDI."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "Parallel IRQ # for MotuMTPAV MIDI."); module_param(hwports, int, 0444); MODULE_PARM_DESC(hwports, "Hardware ports # for MotuMTPAV MIDI."); diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index 1927b89e1d1f..04be126fe4e6 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -84,9 +84,9 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Serial MIDI."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable UART16550A chip."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for UART16550A chip."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for UART16550A chip."); module_param_array(speed, int, NULL, 0444); MODULE_PARM_DESC(speed, "Speed in bauds.");

1 0

[alsa-devel] [PATCH] ASoC: rt5670: Enable Braswell platform workaround for Dell Wyse 3040
by Takashi Iwai 01 Dec '16

01 Dec '16

Dell Wyse 3040 requires the platform workaround for enabling dmic and jack detection as defined for Braswell CRB. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- I guess the platform data should be applied generically to all CHT machines instead of DMI matching? DMI matching doesn't scale, obviously. sound/soc/codecs/rt5670.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 98c7efbc6ee0..97bafac3bc15 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -2827,6 +2827,13 @@ static const struct dmi_system_id dmi_platform_intel_braswell[] = { DMI_MATCH(DMI_BOARD_NAME, "Braswell CRB"), }, }, + { + .ident = "Dell Wyse 3040", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Wyse 3040"), + }, + }, {} }; -- 2.10.2

3 5

Re: [alsa-devel] [PATCH v2] ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent glitches
by kbuild test robot 01 Dec '16

01 Dec '16

Hi Matt, [auto build test ERROR on asoc/for-next] [also build test ERROR on v4.9-rc7 next-20161130] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Matt-Ranostay/ASoC-omap-mcbsp-Add-… base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next config: arm-allmodconfig (attached as .config) compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705 reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/m… -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=arm All errors (new ones prefixed by >>): sound/soc/omap/mcbsp.c: In function 'omap_mcbsp_start': >> sound/soc/omap/mcbsp.c:653:28: error: 'struct omap_mcbsp' has no member named 'pm_qos_req'; did you mean 'dma_req'? pm_qos_add_request(&mcbsp->pm_qos_req, ^~ sound/soc/omap/mcbsp.c: In function 'omap_mcbsp_stop': sound/soc/omap/mcbsp.c:745:30: error: 'struct omap_mcbsp' has no member named 'pm_qos_req'; did you mean 'dma_req'? pm_qos_remove_request(&mcbsp->pm_qos_req); ^~ sound/soc/omap/mcbsp.c: In function 'omap_mcbsp_cleanup': sound/soc/omap/mcbsp.c:1113:34: error: 'struct omap_mcbsp' has no member named 'pm_qos_req'; did you mean 'dma_req'? if (pm_qos_request_active(&mcbsp->pm_qos_req)) ^~ sound/soc/omap/mcbsp.c:1114:31: error: 'struct omap_mcbsp' has no member named 'pm_qos_req'; did you mean 'dma_req'? pm_qos_remove_request(&mcbsp->pm_qos_req); ^~ vim +653 sound/soc/omap/mcbsp.c 647 int enable_srg = 0; 648 int latency = mcbsp->pdata->buffer_size * 23; 649 u16 w; 650 651 /* Prevent omap hardware from hitting off between fifo fills */ 652 if (latency) > 653 pm_qos_add_request(&mcbsp->pm_qos_req, 654 PM_QOS_CPU_DMA_LATENCY, latency); 655 656 if (mcbsp->st_data) --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation

1 0

[alsa-devel] [PATCH V2 0/5] ASoC/arizona: Ensure pin searches use widget name prefix
by Richard Fitzgerald 01 Dec '16

01 Dec '16

The name of a codec pin can have an optional prefix string, which is defined by the audio machine driver. The snd_soc_dapm_x_pin functions take the fully-specified name including the prefix and so the existing code would fail to find the pin if the audio machine driver had added a prefix. This patch chain adds new helper functions that take a non-prefixed name for a specific ASoC component and internally add that component's prefix. The other patches update the arizona drivers to use these new functions. Richard Fitzgerald (5): ASoC: core: Add component pin control functions ASoC: arizona: Use component pin control functions regulator: arizona-micsupp: Use SoC component pin control functions extcon: arizona: Use SoC component pin control functions Input: arizona-haptics - Use SoC component pin control functions drivers/extcon/extcon-arizona.c | 8 +- drivers/input/misc/arizona-haptics.c | 13 ++- drivers/regulator/arizona-micsupp.c | 6 +- include/sound/soc.h | 20 ++++ sound/soc/codecs/arizona.c | 12 ++- sound/soc/codecs/cs47l24.c | 3 +- sound/soc/codecs/wm5102.c | 3 +- sound/soc/codecs/wm5110.c | 3 +- sound/soc/codecs/wm8997.c | 3 +- sound/soc/codecs/wm8998.c | 3 +- sound/soc/soc-utils.c | 199 +++++++++++++++++++++++++++++++++++ 11 files changed, 255 insertions(+), 18 deletions(-) -- 1.9.1

4 13

[alsa-devel] [PATCH v4] clkdev: add devm_of_clk_get()
by Kuninori Morimoto 01 Dec '16

01 Dec '16

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Current Linux has of_clk_get(), but doesn't have devm_of_clk_get(). This patch adds it. It is implemeted in clk-devres.c to share devm_clk_release(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- v3 -> v4 - git log explain why it is implemeted in clk-devres - it is related to CONFIG_HAVE_CLK drivers/clk/clk-devres.c | 21 +++++++++++++++++++++ include/linux/clk.h | 27 +++++++++++++++++++++++---- 2 files changed, 44 insertions(+), 4 deletions(-) diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c index 8f57154..2449b25 100644 --- a/drivers/clk/clk-devres.c +++ b/drivers/clk/clk-devres.c @@ -53,3 +53,24 @@ void devm_clk_put(struct device *dev, struct clk *clk) WARN_ON(ret); } EXPORT_SYMBOL(devm_clk_put); + +struct clk *devm_of_clk_get(struct device *dev, + struct device_node *np, int index) +{ + struct clk **ptr, *clk; + + ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + clk = of_clk_get(np, index); + if (!IS_ERR(clk)) { + *ptr = clk; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return clk; +} +EXPORT_SYMBOL(devm_of_clk_get); diff --git a/include/linux/clk.h b/include/linux/clk.h index 123c027..7f50c5f 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -17,8 +17,9 @@ #include <linux/notifier.h> struct device; - struct clk; +struct device_node; +struct of_phandle_args; /** * DOC: clk notifier callback types @@ -249,6 +250,21 @@ static inline void clk_unprepare(struct clk *clk) struct clk *devm_clk_get(struct device *dev, const char *id); /** + * devm_clk_get - lookup and obtain a managed reference to a clock producer. + * @dev: device for clock "consumer" + * @np: pointer to clock consumer node + * @index: clock index + * + * This function parses the clocks, and uses them to look up the + * struct clk from the registered list of clock providers by using + * @np and @index. + * + * The clock will automatically be freed when the device is unbound + * from the bus. + */ +struct clk *devm_of_clk_get(struct device *dev, struct device_node *np, int index); + +/** * clk_enable - inform the system when the clock source should be running. * @clk: clock source * @@ -432,6 +448,12 @@ static inline struct clk *devm_clk_get(struct device *dev, const char *id) return NULL; } +static inline struct clk *devm_of_clk_get(struct device *dev, + struct device_node *np, int index) +{ + return NULL; +} + static inline void clk_put(struct clk *clk) {} static inline void devm_clk_put(struct device *dev, struct clk *clk) {} @@ -501,9 +523,6 @@ static inline void clk_disable_unprepare(struct clk *clk) clk_unprepare(clk); } -struct device_node; -struct of_phandle_args; - #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) struct clk *of_clk_get(struct device_node *np, int index); struct clk *of_clk_get_by_name(struct device_node *np, const char *name); -- 1.9.1

2 2

[alsa-devel] [PATCH v2] clkdev: add devm_of_clk_get()
by Kuninori Morimoto 01 Dec '16

01 Dec '16

This is based on devm_clk_get() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- v1 -> v2 - added "static" and "inline" on header drivers/clk/clkdev.c | 26 ++++++++++++++++++++++++++ include/linux/clk.h | 7 +++++++ 2 files changed, 33 insertions(+) diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index 89cc700..93a613b 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -55,6 +55,32 @@ struct clk *of_clk_get(struct device_node *np, int index) } EXPORT_SYMBOL(of_clk_get); +static void devm_of_clk_release(struct device *dev, void *res) +{ + clk_put(*(struct clk **)res); +} + +struct clk *devm_of_clk_get(struct device *dev, + struct device_node *np, int index) +{ + struct clk **ptr, *clk; + + ptr = devres_alloc(devm_of_clk_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + clk = of_clk_get(np, index); + if (!IS_ERR(clk)) { + *ptr = clk; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return clk; +} +EXPORT_SYMBOL(devm_of_clk_get); + static struct clk *__of_clk_get_by_name(struct device_node *np, const char *dev_id, const char *name) diff --git a/include/linux/clk.h b/include/linux/clk.h index a89ba4e..33cd540 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -502,6 +502,8 @@ struct of_phandle_args; #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) struct clk *of_clk_get(struct device_node *np, int index); +struct clk *devm_of_clk_get(struct device *dev, + struct device_node *np, int index); struct clk *of_clk_get_by_name(struct device_node *np, const char *name); struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec); #else @@ -509,6 +511,11 @@ static inline struct clk *of_clk_get(struct device_node *np, int index) { return ERR_PTR(-ENOENT); } +static inline struct clk *devm_of_clk_get(struct device *dev, + struct device_node *np, int index) +{ + return ERR_PTR(-ENOENT); +} static inline struct clk *of_clk_get_by_name(struct device_node *np, const char *name) { -- 1.9.1

4 15