November 2016 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH resend v3] ASoC: sun4i-codec: Add "Right Mixer" to "Line Out Mono Diff." route
by Chen-Yu Tsai 25 Nov '16

25 Nov '16

The mono differential output for "Line Out" downmixes the stereo audio from the mixer, instead of just taking the left channel. Add a route from the "Right Mixer" to "Line Out Source Playback Route" through the "Mono Differential" path, so DAPM doesn't shut down everything if the left channel is muted. Fixes: 0f909f98d7cb ("ASoC: sun4i-codec: Add support for A31 Line Out playback") Signed-off-by: Chen-Yu Tsai <wens(a)csie.org> --- This patch seems to have fallen through the cracks. --- sound/soc/sunxi/sun4i-codec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index 092fdcf6de95..b11b0ad4dfbe 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -1047,6 +1047,7 @@ static const struct snd_soc_dapm_route sun6i_codec_codec_dapm_routes[] = { { "Line Out Source Playback Route", "Stereo", "Left Mixer" }, { "Line Out Source Playback Route", "Stereo", "Right Mixer" }, { "Line Out Source Playback Route", "Mono Differential", "Left Mixer" }, + { "Line Out Source Playback Route", "Mono Differential", "Right Mixer" }, { "LINEOUT", NULL, "Line Out Source Playback Route" }, /* ADC Routes */ -- 2.10.2

3 2

[alsa-devel] [PATCH v2] dbri: Fix compiler warning
by Tushar Dave 24 Nov '16

24 Nov '16

dbri uses 'u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit DMA and therefore dma_addr_t became of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. sound/sparc/dbri.c: In function ‘snd_dbri_create’: sound/sparc/dbri.c:2538: warning: passing argument 3 of ‘dma_zalloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:608: note: expected ‘dma_addr_t *’ but argument is of type ‘u32 *’ For the record, dbri(sbus) driver never executes on sun4v. Therefore even though 64bit DMA is enabled on SPARC, dbri continues to use legacy iommu that guarantees DMA address is always in 32bit range. This patch resolves above compiler warning. Signed-off-by: Tushar Dave <tushar.n.dave(a)oracle.com> Reviewed-by: thomas tai <thomas.tai(a)oracle.com> --- v1->v2: - commit message updated. sound/sparc/dbri.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 0190cb6..542c1b5 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -304,7 +304,7 @@ struct snd_dbri { spinlock_t lock; struct dbri_dma *dma; /* Pointer to our DMA block */ - u32 dma_dvma; /* DBRI visible DMA address */ + dma_addr_t dma_dvma; /* DBRI visible DMA address */ void __iomem *regs; /* dbri HW regs */ int dbri_irqp; /* intr queue pointer */ @@ -657,12 +657,14 @@ static void dbri_cmdwait(struct snd_dbri *dbri) */ static s32 *dbri_cmdlock(struct snd_dbri *dbri, int len) { + u32 dvma_addr = (u32)dbri->dma_dvma; + /* Space for 2 WAIT cmds (replaced later by 1 JUMP cmd) */ len += 2; spin_lock(&dbri->cmdlock); if (dbri->cmdptr - dbri->dma->cmd + len < DBRI_NO_CMDS - 2) return dbri->cmdptr + 2; - else if (len < sbus_readl(dbri->regs + REG8) - dbri->dma_dvma) + else if (len < sbus_readl(dbri->regs + REG8) - dvma_addr) return dbri->dma->cmd; else printk(KERN_ERR "DBRI: no space for commands."); @@ -680,6 +682,7 @@ static s32 *dbri_cmdlock(struct snd_dbri *dbri, int len) */ static void dbri_cmdsend(struct snd_dbri *dbri, s32 *cmd, int len) { + u32 dvma_addr = (u32)dbri->dma_dvma; s32 tmp, addr; static int wait_id = 0; @@ -689,7 +692,7 @@ static void dbri_cmdsend(struct snd_dbri *dbri, s32 *cmd, int len) *(cmd+1) = DBRI_CMD(D_WAIT, 1, wait_id); /* Replace the last command with JUMP */ - addr = dbri->dma_dvma + (cmd - len - dbri->dma->cmd) * sizeof(s32); + addr = dvma_addr + (cmd - len - dbri->dma->cmd) * sizeof(s32); *(dbri->cmdptr+1) = addr; *(dbri->cmdptr) = DBRI_CMD(D_JUMP, 0, 0); @@ -747,6 +750,7 @@ static void dbri_reset(struct snd_dbri *dbri) /* Lock must not be held before calling this */ static void dbri_initialize(struct snd_dbri *dbri) { + u32 dvma_addr = (u32)dbri->dma_dvma; s32 *cmd; u32 dma_addr; unsigned long flags; @@ -764,7 +768,7 @@ static void dbri_initialize(struct snd_dbri *dbri) /* * Initialize the interrupt ring buffer. */ - dma_addr = dbri->dma_dvma + dbri_dma_off(intr, 0); + dma_addr = dvma_addr + dbri_dma_off(intr, 0); dbri->dma->intr[0] = dma_addr; dbri->dbri_irqp = 1; /* @@ -778,7 +782,7 @@ static void dbri_initialize(struct snd_dbri *dbri) dbri->cmdptr = cmd; *(cmd++) = DBRI_CMD(D_WAIT, 1, 0); *(cmd++) = DBRI_CMD(D_WAIT, 1, 0); - dma_addr = dbri->dma_dvma + dbri_dma_off(cmd, 0); + dma_addr = dvma_addr + dbri_dma_off(cmd, 0); sbus_writel(dma_addr, dbri->regs + REG8); spin_unlock(&dbri->cmdlock); @@ -1077,6 +1081,7 @@ static void recv_fixed(struct snd_dbri *dbri, int pipe, volatile __u32 *ptr) static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) { struct dbri_streaminfo *info = &dbri->stream_info[streamno]; + u32 dvma_addr = (u32)dbri->dma_dvma; __u32 dvma_buffer; int desc; int len; @@ -1177,7 +1182,7 @@ static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) else { dbri->next_desc[last_desc] = desc; dbri->dma->desc[last_desc].nda = - dbri->dma_dvma + dbri_dma_off(desc, desc); + dvma_addr + dbri_dma_off(desc, desc); } last_desc = desc; @@ -1192,7 +1197,7 @@ static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) } dbri->dma->desc[last_desc].nda = - dbri->dma_dvma + dbri_dma_off(desc, first_desc); + dvma_addr + dbri_dma_off(desc, first_desc); dbri->next_desc[last_desc] = first_desc; dbri->pipes[info->pipe].first_desc = first_desc; dbri->pipes[info->pipe].desc = first_desc; @@ -1697,6 +1702,7 @@ calling dbri_process_interrupt_buffer(), which works even if the CPU's static void xmit_descs(struct snd_dbri *dbri) { struct dbri_streaminfo *info; + u32 dvma_addr = (u32)dbri->dma_dvma; s32 *cmd; unsigned long flags; int first_td; @@ -1718,7 +1724,7 @@ static void xmit_descs(struct snd_dbri *dbri) *(cmd++) = DBRI_CMD(D_SDP, 0, dbri->pipes[info->pipe].sdp | D_SDP_P | D_SDP_EVERY | D_SDP_C); - *(cmd++) = dbri->dma_dvma + + *(cmd++) = dvma_addr + dbri_dma_off(desc, first_td); dbri_cmdsend(dbri, cmd, 2); @@ -1740,7 +1746,7 @@ static void xmit_descs(struct snd_dbri *dbri) *(cmd++) = DBRI_CMD(D_SDP, 0, dbri->pipes[info->pipe].sdp | D_SDP_P | D_SDP_EVERY | D_SDP_C); - *(cmd++) = dbri->dma_dvma + + *(cmd++) = dvma_addr + dbri_dma_off(desc, first_td); dbri_cmdsend(dbri, cmd, 2); @@ -2539,7 +2545,7 @@ static int snd_dbri_create(struct snd_card *card, if (!dbri->dma) return -ENOMEM; - dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n", + dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08llx)\n", dbri->dma, dbri->dma_dvma); /* Map the registers into memory. */ -- 1.9.1

3 2

[alsa-devel] [PATCH 1/2] topology: Merge private data before embedded controls of a widget
by mengdong.lin＠linux.intel.com 24 Nov '16

24 Nov '16

From: Mengdong Lin <mengdong.lin(a)linux.intel.com> For a widget ABI object, its private data sits before the embedded controls, so we should merge the private data blocks at first, and then the embedded controls. Signed-off-by: Mengdong Lin <mengdong.lin(a)linux.intel.com> diff --git a/src/topology/dapm.c b/src/topology/dapm.c index 9fa0aac..e830751 100644 --- a/src/topology/dapm.c +++ b/src/topology/dapm.c @@ -160,7 +160,21 @@ static int tplg_build_widget(snd_tplg_t *tplg, base = &elem->ref_list; - /* for each ref in this control elem */ + /* A widget's private data sits before the embedded controls. + * So merge the private data blocks at first + */ + list_for_each(pos, base) { + ref = list_entry(pos, struct tplg_ref, list); + + if (ref->type != SND_TPLG_TYPE_DATA) + continue; + + err = tplg_copy_data(tplg, elem, ref); + if (err < 0) + return err; + } + + /* Merge the embedded controls */ list_for_each(pos, base) { ref = list_entry(pos, struct tplg_ref, list); @@ -190,12 +204,6 @@ static int tplg_build_widget(snd_tplg_t *tplg, err = copy_dapm_control(elem, ref->elem); break; - case SND_TPLG_TYPE_DATA: - err = tplg_copy_data(tplg, elem, ref); - if (err < 0) - return err; - break; - default: break; } -- 2.5.0

3 2

[alsa-devel] [patch] ALSA: emu10k1: shift wrapping bug in snd_emu10k1_ptr_read()
by Dan Carpenter 24 Nov '16

24 Nov '16

Static analysis says "size" is a number 0-63. So we really want to be doing the shift as a u64 and not a int type. Presumably "size" is never actually more than 31 otherwise the shift wrap would have been detected in testing. The "mask" is a u32 so we only care about the bottom 32 bits which also implies that "size" is less than 32. This code pre-dates git. I haven't tested this change, it's to fix a static analysis warning. I can't think that shift wrapping is the correct behavior so presumably this change is harmless but it definitely changes how the code works when size is larger than 32. Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index 706b4f0..fd204f3 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -46,7 +46,7 @@ unsigned int snd_emu10k1_ptr_read(struct snd_emu10k1 * emu, unsigned int reg, un size = (reg >> 24) & 0x3f; offset = (reg >> 16) & 0x1f; - mask = ((1 << size) - 1) << offset; + mask = ((1ULL << size) - 1) << offset; spin_lock_irqsave(&emu->emu_lock, flags); outl(regptr, emu->port + PTR); @@ -81,7 +81,7 @@ void snd_emu10k1_ptr_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned i size = (reg >> 24) & 0x3f; offset = (reg >> 16) & 0x1f; - mask = ((1 << size) - 1) << offset; + mask = ((1ULL << size) - 1) << offset; data = (data << offset) & mask; spin_lock_irqsave(&emu->emu_lock, flags);

2 1

[alsa-devel] [PATCH 1/2] ALSA: hda - ignore the assoc and seq when comparing pin configurations
by Hui Wang 24 Nov '16

24 Nov '16

More and more pin configurations have been adding to the pin quirk table, lots of them are only different from assoc and seq, but they all apply to the same QUIRK_FIXUP, if we don't compare assoc and seq when matching pin configurations, it will greatly reduce the pin quirk table size. We have tested this change on a couple of Dell laptops, it worked well. Cc: <stable(a)vger.kernel.org> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- No hurry to cleanup the existing pin quirk table, if this patch run well for a period of time, then I will do the cleanup little by little. If this patch introduce some problem, we just need to revert this patch. sound/pci/hda/hda_auto_parser.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_auto_parser.c b/sound/pci/hda/hda_auto_parser.c index 7f57a14..4ad29f8 100644 --- a/sound/pci/hda/hda_auto_parser.c +++ b/sound/pci/hda/hda_auto_parser.c @@ -901,7 +901,7 @@ static bool pin_config_match(struct hda_codec *codec, for (; t_pins->nid; t_pins++) { if (t_pins->nid == nid) { found = 1; - if (t_pins->val == cfg) + if ((t_pins->val & 0xfffffff0) == (cfg & 0xfffffff0)) break; else if ((cfg & 0xf0000000) == 0x40000000 && (t_pins->val & 0xf0000000) == 0x40000000) break; -- 1.9.1

2 2

[alsa-devel] [RFC v2 0/3] ALSA controls management using index/device/sub-devices fields
by Arnaud Pouliquen 24 Nov '16

24 Nov '16

V2: Aim of this version is to continue discussion on DAI PCM control focused on ASoC drivers. In this V2 implementation in Soc-core is simplified to limit impact on existing code. Proposal is to add field in DAI driver struct to declare PCM controls that need to be linked to PCM character device on DAI link probing. Update of the RFC V1 based on discussions: - [RFC 4/4] iecset: allow to select control with device and sub-device numbers no more part of the RFC V2, will be discussed in a separate thread - [RFC 2/4] ALSA: control: increment index field for duplicated control. no more part of the RFC V2, no more need as RFC subject is PCM controls - [RFC V2 1/3] ASoC: core: allow DAI PCM controls bound to PCM device Patch reworked from V1 to simplify implementation - Binding is not done for Dai links tagged with no_pcm (DPCM). - no more possibility to add the controls after the DAI link probing. - [RFC V2 2/3] ASoC: sti: bind PCM controls to PCM device. - [RFC V2 3/3] ASoC: hdmi-codec: Example of PCM control bound to PCM device for multi Example of implementation in STI DAI driver and HDMI-codec drivers V1: http://www.spinics.net/lists/alsa-devel/msg56479.html 1) Alsa-utils patch - iecset: allow to select control with device and sub-device numbers This patch allows to access to 2 iec controls differentiated by device/sub-devices numbers => For me, this patch is mandatory to be able to address the ASoC IEC controls, in case of no fix is implemented to allows index field update in ASoC. 2) Alsa driver patches - ASoC: core: allow PCM control binding to PCM device Add relationship between DAIs PCM controls and PCM device. - ALSA: control: increment index field for duplicated control. Generic implementation of the patch proposed in HDA driver (http://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=ea9b…) - ASoC: sti: use bind_pcm_ctl implementation of bind_pcm_ctl for sti driver. Arnaud Pouliquen (3): ASoC: core: allow DAI PCM controls bound to PCM device ASoC: sti: bind pcm controls to pcm device. ASoC: hdmi-codec: Example of PCM control bound to PCM device for multi HDMI DAIs. Regards, Arnaud include/sound/soc-dai.h | 4 ++++ sound/soc/codecs/hdmi-codec.c | 4 ++-- sound/soc/soc-core.c | 37 +++++++++++++++++++++++++++++++++++++ sound/soc/sti/sti_uniperif.c | 33 ++++----------------------------- 4 files changed, 47 insertions(+), 31 deletions(-) -- 1.9.1

3 6

[alsa-devel] [PATCH v4] drm: bridge: add DesignWare HDMI I2S audio support
by Kuninori Morimoto 24 Nov '16

24 Nov '16

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Current dw-hdmi is supporting sound via AHB bus, but it has I2S audio feature too. This patch adds I2S audio support to dw-hdmi. This HDMI I2S is supported by using ALSA SoC common HDMI encoder driver. Tested-by: Jose Abreu <joabreu(a)synopsys.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- v3 -> v4 - use IS_ERR() instead of IS_ERR_OR_NULL() on probe() drivers/gpu/drm/bridge/Kconfig | 8 ++ drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/dw-hdmi-audio.h | 7 ++ drivers/gpu/drm/bridge/dw-hdmi-i2s-audio.c | 142 +++++++++++++++++++++++++++++ drivers/gpu/drm/bridge/dw-hdmi.c | 22 ++++- drivers/gpu/drm/bridge/dw-hdmi.h | 21 +++++ 6 files changed, 199 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/bridge/dw-hdmi-i2s-audio.c diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 10e12e7..3129f8d 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -39,6 +39,14 @@ config DRM_DW_HDMI_AHB_AUDIO Designware HDMI block. This is used in conjunction with the i.MX6 HDMI driver. +config DRM_DW_HDMI_I2S_AUDIO + tristate "Synopsis Designware I2S Audio interface" + depends on DRM_DW_HDMI + select SND_SOC_HDMI_CODEC + help + Support the I2S Audio interface which is part of the Synopsis + Designware HDMI block. + config DRM_NXP_PTN3460 tristate "NXP PTN3460 DP/LVDS bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index cdf3a3c..9a54f2a 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o +obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o obj-$(CONFIG_DRM_SII902X) += sii902x.o diff --git a/drivers/gpu/drm/bridge/dw-hdmi-audio.h b/drivers/gpu/drm/bridge/dw-hdmi-audio.h index 91f631b..fd1f745 100644 --- a/drivers/gpu/drm/bridge/dw-hdmi-audio.h +++ b/drivers/gpu/drm/bridge/dw-hdmi-audio.h @@ -11,4 +11,11 @@ struct dw_hdmi_audio_data { u8 *eld; }; +struct dw_hdmi_i2s_audio_data { + struct dw_hdmi *hdmi; + + void (*write)(struct dw_hdmi *hdmi, u8 val, int offset); + u8 (*read)(struct dw_hdmi *hdmi, int offset); +}; + #endif diff --git a/drivers/gpu/drm/bridge/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/dw-hdmi-i2s-audio.c new file mode 100644 index 0000000..79391c0 --- /dev/null +++ b/drivers/gpu/drm/bridge/dw-hdmi-i2s-audio.c @@ -0,0 +1,142 @@ +/* + * dw-hdmi-i2s-audio.c + * + * Copyright (c) 2016 Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <drm/bridge/dw_hdmi.h> + +#include <sound/hdmi-codec.h> + +#include "dw-hdmi.h" +#include "dw-hdmi-audio.h" + +#define DRIVER_NAME "dw-hdmi-i2s-audio" + +static inline void hdmi_write(struct dw_hdmi_i2s_audio_data *audio, + u8 val, int offset) +{ + struct dw_hdmi *hdmi = audio->hdmi; + + audio->write(hdmi, val, offset); +} + +static inline u8 hdmi_read(struct dw_hdmi_i2s_audio_data *audio, int offset) +{ + struct dw_hdmi *hdmi = audio->hdmi; + + return audio->read(hdmi, offset); +} + +static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, + struct hdmi_codec_daifmt *fmt, + struct hdmi_codec_params *hparms) +{ + struct dw_hdmi_i2s_audio_data *audio = data; + struct dw_hdmi *hdmi = audio->hdmi; + u8 conf0 = 0; + u8 conf1 = 0; + u8 inputclkfs = 0; + + /* it cares I2S only */ + if ((fmt->fmt != HDMI_I2S) || + (fmt->bit_clk_master | fmt->frame_clk_master)) { + dev_err(dev, "unsupported format/settings\n"); + return -EINVAL; + } + + inputclkfs = HDMI_AUD_INPUTCLKFS_64FS; + conf0 = HDMI_AUD_CONF0_I2S_ALL_ENABLE; + + switch (hparms->sample_width) { + case 16: + conf1 = HDMI_AUD_CONF1_WIDTH_16; + break; + case 24: + case 32: + conf1 = HDMI_AUD_CONF1_WIDTH_24; + break; + } + + dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate); + + hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS); + hdmi_write(audio, conf0, HDMI_AUD_CONF0); + hdmi_write(audio, conf1, HDMI_AUD_CONF1); + + dw_hdmi_audio_enable(hdmi); + + return 0; +} + +static void dw_hdmi_i2s_audio_shutdown(struct device *dev, void *data) +{ + struct dw_hdmi_i2s_audio_data *audio = data; + struct dw_hdmi *hdmi = audio->hdmi; + + dw_hdmi_audio_disable(hdmi); + + hdmi_write(audio, HDMI_AUD_CONF0_SW_RESET, HDMI_AUD_CONF0); +} + +static struct hdmi_codec_ops dw_hdmi_i2s_ops = { + .hw_params = dw_hdmi_i2s_hw_params, + .audio_shutdown = dw_hdmi_i2s_audio_shutdown, +}; + +static int snd_dw_hdmi_probe(struct platform_device *pdev) +{ + struct dw_hdmi_i2s_audio_data *audio = pdev->dev.platform_data; + struct platform_device_info pdevinfo; + struct hdmi_codec_pdata pdata; + struct platform_device *platform; + + + pdata.ops = &dw_hdmi_i2s_ops; + pdata.i2s = 1; + pdata.max_i2s_channels = 6; + pdata.data = audio; + + memset(&pdevinfo, 0, sizeof(pdevinfo)); + pdevinfo.parent = pdev->dev.parent; + pdevinfo.id = PLATFORM_DEVID_AUTO; + pdevinfo.name = HDMI_CODEC_DRV_NAME; + pdevinfo.data = &pdata; + pdevinfo.size_data = sizeof(pdata); + pdevinfo.dma_mask = DMA_BIT_MASK(32); + + platform = platform_device_register_full(&pdevinfo); + if (IS_ERR(platform)) + return PTR_ERR(platform); + + dev_set_drvdata(&pdev->dev, platform); + + return 0; +} + +static int snd_dw_hdmi_remove(struct platform_device *pdev) +{ + struct platform_device *platform = dev_get_drvdata(&pdev->dev); + + platform_device_unregister(platform); + + return 0; +} + +static struct platform_driver snd_dw_hdmi_driver = { + .probe = snd_dw_hdmi_probe, + .remove = snd_dw_hdmi_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; +module_platform_driver(snd_dw_hdmi_driver); + +MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com>"); +MODULE_DESCRIPTION("Synopsis Designware HDMI I2S ALSA SoC interface"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c index ab7023e..30a2e16 100644 --- a/drivers/gpu/drm/bridge/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/dw-hdmi.c @@ -1639,10 +1639,11 @@ int dw_hdmi_bind(struct device *dev, struct device *master, struct device_node *np = dev->of_node; struct platform_device_info pdevinfo; struct device_node *ddc_node; - struct dw_hdmi_audio_data audio; struct dw_hdmi *hdmi; int ret; u32 val = 1; + u8 config0; + u8 config1; hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL); if (!hdmi) @@ -1770,7 +1771,12 @@ int dw_hdmi_bind(struct device *dev, struct device *master, pdevinfo.parent = dev; pdevinfo.id = PLATFORM_DEVID_AUTO; - if (hdmi_readb(hdmi, HDMI_CONFIG1_ID) & HDMI_CONFIG1_AHB) { + config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID); + config1 = hdmi_readb(hdmi, HDMI_CONFIG1_ID); + + if (config1 & HDMI_CONFIG1_AHB) { + struct dw_hdmi_audio_data audio; + audio.phys = iores->start; audio.base = hdmi->regs; audio.irq = irq; @@ -1782,6 +1788,18 @@ int dw_hdmi_bind(struct device *dev, struct device *master, pdevinfo.size_data = sizeof(audio); pdevinfo.dma_mask = DMA_BIT_MASK(32); hdmi->audio = platform_device_register_full(&pdevinfo); + } else if (config0 & HDMI_CONFIG0_I2S) { + struct dw_hdmi_i2s_audio_data audio; + + audio.hdmi = hdmi; + audio.write = hdmi_writeb; + audio.read = hdmi_readb; + + pdevinfo.name = "dw-hdmi-i2s-audio"; + pdevinfo.data = &audio; + pdevinfo.size_data = sizeof(audio); + pdevinfo.dma_mask = DMA_BIT_MASK(32); + hdmi->audio = platform_device_register_full(&pdevinfo); } dev_set_drvdata(dev, hdmi); diff --git a/drivers/gpu/drm/bridge/dw-hdmi.h b/drivers/gpu/drm/bridge/dw-hdmi.h index fc9a560..c8bdbf2 100644 --- a/drivers/gpu/drm/bridge/dw-hdmi.h +++ b/drivers/gpu/drm/bridge/dw-hdmi.h @@ -545,6 +545,10 @@ #define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12 enum { + +/* CONFIG0_ID field values */ + HDMI_CONFIG0_I2S = 0x10, + /* CONFIG1_ID field values */ HDMI_CONFIG1_AHB = 0x01, @@ -887,6 +891,17 @@ enum { HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08, HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04, +/* AUD_CONF0 field values */ + HDMI_AUD_CONF0_SW_RESET = 0x80, + HDMI_AUD_CONF0_I2S_ALL_ENABLE = 0x2F, + +/* AUD_CONF1 field values */ + HDMI_AUD_CONF1_MODE_I2S = 0x00, + HDMI_AUD_CONF1_MODE_RIGHT_J = 0x02, + HDMI_AUD_CONF1_MODE_LEFT_J = 0x04, + HDMI_AUD_CONF1_WIDTH_16 = 0x10, + HDMI_AUD_CONF1_WIDTH_24 = 0x18, + /* AUD_CTS3 field values */ HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0, @@ -901,6 +916,12 @@ enum { HDMI_AUD_CTS3_CTS_MANUAL = 0x10, HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f, +/* HDMI_AUD_INPUTCLKFS field values */ + HDMI_AUD_INPUTCLKFS_128FS = 0, + HDMI_AUD_INPUTCLKFS_256FS = 1, + HDMI_AUD_INPUTCLKFS_512FS = 2, + HDMI_AUD_INPUTCLKFS_64FS = 4, + /* AHB_DMA_CONF0 field values */ HDMI_AHB_DMA_CONF0_SW_FIFO_RST_OFFSET = 7, HDMI_AHB_DMA_CONF0_SW_FIFO_RST_MASK = 0x80, -- 1.9.1

3 5

[alsa-devel] [PATCH 2/2] topology: Store number of strings of a text section
by mengdong.lin＠linux.intel.com 24 Nov '16

24 Nov '16

From: Mengdong Lin <mengdong.lin(a)linux.intel.com> Enum controls may use text elements and need the number of strings. This patch adds a text child object for a generic element. When parsing a text section from the configuation file, store the text strings and number of strings (num_items) in the text child object of the element. Reported-by: G Kranthi <gudishax.kranthikumar(a)intel.com> Signed-off-by: Mengdong Lin <mengdong.lin(a)linux.intel.com> diff --git a/src/topology/ctl.c b/src/topology/ctl.c index 54f8e44..907a97f 100644 --- a/src/topology/ctl.c +++ b/src/topology/ctl.c @@ -159,9 +159,11 @@ static void copy_enum_texts(struct tplg_elem *enum_elem, struct tplg_elem *ref_elem) { struct snd_soc_tplg_enum_control *ec = enum_elem->enum_ctrl; + struct tplg_texts *texts = ref_elem->texts; - memcpy(ec->texts, ref_elem->texts, + memcpy(ec->texts, texts->items, SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN); + ec->items += texts->num_items; } /* check referenced text for a enum control */ diff --git a/src/topology/elem.c b/src/topology/elem.c index 1a5ac84..db26483 100644 --- a/src/topology/elem.c +++ b/src/topology/elem.c @@ -159,6 +159,7 @@ struct tplg_elem* tplg_elem_new_common(snd_tplg_t *tplg, break; case SND_TPLG_TYPE_TEXT: list_add_tail(&elem->list, &tplg->text_list); + obj_size = sizeof(struct tplg_texts); break; case SND_TPLG_TYPE_TLV: list_add_tail(&elem->list, &tplg->tlv_list); diff --git a/src/topology/text.c b/src/topology/text.c index 0c6594a..303fbeb 100644 --- a/src/topology/text.c +++ b/src/topology/text.c @@ -25,6 +25,7 @@ static int parse_text_values(snd_config_t *cfg, struct tplg_elem *elem) { + struct tplg_texts *texts = elem->texts; snd_config_iterator_t i, next; snd_config_t *n; const char *value = NULL; @@ -44,13 +45,14 @@ static int parse_text_values(snd_config_t *cfg, struct tplg_elem *elem) if (snd_config_get_string(n, &value) < 0) continue; - elem_copy_text(&elem->texts[j][0], value, + elem_copy_text(&texts->items[j][0], value, SNDRV_CTL_ELEM_ID_NAME_MAXLEN); - tplg_dbg("\t%s\n", &elem->texts[j][0]); + tplg_dbg("\t%s\n", &texts->items[j][0]); j++; } + texts->num_items = j; return 0; } diff --git a/src/topology/tplg_local.h b/src/topology/tplg_local.h index f913563..eb2f7bd 100644 --- a/src/topology/tplg_local.h +++ b/src/topology/tplg_local.h @@ -91,6 +91,11 @@ struct tplg_ref { struct list_head list; }; +struct tplg_texts { + unsigned int num_items; + char items[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; +}; + /* element for vendor tokens */ struct tplg_token { char id[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; @@ -128,9 +133,6 @@ struct tplg_elem { char id[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; - /* storage for texts and data if this is text or data elem*/ - char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; - int index; enum snd_tplg_type type; @@ -155,6 +157,7 @@ struct tplg_elem { /* these do not map to UAPI structs but are internal only */ struct snd_soc_tplg_ctl_tlv *tlv; + struct tplg_texts *texts; struct snd_soc_tplg_private *data; struct tplg_vendor_tokens *tokens; struct tplg_vendor_tuples *tuples; -- 2.5.0

1 0

[alsa-devel] [PATCH v2 0/4] ASoC: Convert to module_i2c/spi_driver()
by Kuninori Morimoto 24 Nov '16

24 Nov '16

Hi Mark These are v2 of "ASoC: Convert to module_i2c/spi_driver()" patch series. Mainly, it updated Subject and commit comment, and doesn't have I2C/SPI side patches. It includes I2C side only. Kuninori Morimoto (4): ASoC: uda1380: Remove #if IS_ENABLED(CONFIG_I2C) ASoC: wm9081: Remove #if IS_ENABLED(CONFIG_I2C) ASoC: wm8580: Remove #if IS_ENABLED(CONFIG_I2C) ASoC: wm8523: Remove #if IS_ENABLED(CONFIG_I2C) sound/soc/codecs/Kconfig | 2 ++ sound/soc/codecs/uda1380.c | 22 +--------------------- sound/soc/codecs/wm8523.c | 24 +----------------------- sound/soc/codecs/wm8580.c | 25 +------------------------ sound/soc/codecs/wm9081.c | 2 -- 5 files changed, 5 insertions(+), 70 deletions(-) -- 1.9.1

3 10

[alsa-devel] [PATCH] dbri: Fix compiler warning
by Tushar Dave 23 Nov '16

23 Nov '16

dbri uses 'u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enabled 64bit DMA and therefore dma_addr_t became of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. sound/sparc/dbri.c: In function ‘snd_dbri_create’: sound/sparc/dbri.c:2538: warning: passing argument 3 of ‘dma_zalloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:608: note: expected ‘dma_addr_t *’ but argument is of type ‘u32 *’ This patch resolves above compiler warning. Signed-off-by: Tushar Dave <tushar.n.dave(a)oracle.com> Reviewed-by: thomas tai <thomas.tai(a)oracle.com> --- sound/sparc/dbri.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 0190cb6..542c1b5 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -304,7 +304,7 @@ struct snd_dbri { spinlock_t lock; struct dbri_dma *dma; /* Pointer to our DMA block */ - u32 dma_dvma; /* DBRI visible DMA address */ + dma_addr_t dma_dvma; /* DBRI visible DMA address */ void __iomem *regs; /* dbri HW regs */ int dbri_irqp; /* intr queue pointer */ @@ -657,12 +657,14 @@ static void dbri_cmdwait(struct snd_dbri *dbri) */ static s32 *dbri_cmdlock(struct snd_dbri *dbri, int len) { + u32 dvma_addr = (u32)dbri->dma_dvma; + /* Space for 2 WAIT cmds (replaced later by 1 JUMP cmd) */ len += 2; spin_lock(&dbri->cmdlock); if (dbri->cmdptr - dbri->dma->cmd + len < DBRI_NO_CMDS - 2) return dbri->cmdptr + 2; - else if (len < sbus_readl(dbri->regs + REG8) - dbri->dma_dvma) + else if (len < sbus_readl(dbri->regs + REG8) - dvma_addr) return dbri->dma->cmd; else printk(KERN_ERR "DBRI: no space for commands."); @@ -680,6 +682,7 @@ static s32 *dbri_cmdlock(struct snd_dbri *dbri, int len) */ static void dbri_cmdsend(struct snd_dbri *dbri, s32 *cmd, int len) { + u32 dvma_addr = (u32)dbri->dma_dvma; s32 tmp, addr; static int wait_id = 0; @@ -689,7 +692,7 @@ static void dbri_cmdsend(struct snd_dbri *dbri, s32 *cmd, int len) *(cmd+1) = DBRI_CMD(D_WAIT, 1, wait_id); /* Replace the last command with JUMP */ - addr = dbri->dma_dvma + (cmd - len - dbri->dma->cmd) * sizeof(s32); + addr = dvma_addr + (cmd - len - dbri->dma->cmd) * sizeof(s32); *(dbri->cmdptr+1) = addr; *(dbri->cmdptr) = DBRI_CMD(D_JUMP, 0, 0); @@ -747,6 +750,7 @@ static void dbri_reset(struct snd_dbri *dbri) /* Lock must not be held before calling this */ static void dbri_initialize(struct snd_dbri *dbri) { + u32 dvma_addr = (u32)dbri->dma_dvma; s32 *cmd; u32 dma_addr; unsigned long flags; @@ -764,7 +768,7 @@ static void dbri_initialize(struct snd_dbri *dbri) /* * Initialize the interrupt ring buffer. */ - dma_addr = dbri->dma_dvma + dbri_dma_off(intr, 0); + dma_addr = dvma_addr + dbri_dma_off(intr, 0); dbri->dma->intr[0] = dma_addr; dbri->dbri_irqp = 1; /* @@ -778,7 +782,7 @@ static void dbri_initialize(struct snd_dbri *dbri) dbri->cmdptr = cmd; *(cmd++) = DBRI_CMD(D_WAIT, 1, 0); *(cmd++) = DBRI_CMD(D_WAIT, 1, 0); - dma_addr = dbri->dma_dvma + dbri_dma_off(cmd, 0); + dma_addr = dvma_addr + dbri_dma_off(cmd, 0); sbus_writel(dma_addr, dbri->regs + REG8); spin_unlock(&dbri->cmdlock); @@ -1077,6 +1081,7 @@ static void recv_fixed(struct snd_dbri *dbri, int pipe, volatile __u32 *ptr) static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) { struct dbri_streaminfo *info = &dbri->stream_info[streamno]; + u32 dvma_addr = (u32)dbri->dma_dvma; __u32 dvma_buffer; int desc; int len; @@ -1177,7 +1182,7 @@ static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) else { dbri->next_desc[last_desc] = desc; dbri->dma->desc[last_desc].nda = - dbri->dma_dvma + dbri_dma_off(desc, desc); + dvma_addr + dbri_dma_off(desc, desc); } last_desc = desc; @@ -1192,7 +1197,7 @@ static int setup_descs(struct snd_dbri *dbri, int streamno, unsigned int period) } dbri->dma->desc[last_desc].nda = - dbri->dma_dvma + dbri_dma_off(desc, first_desc); + dvma_addr + dbri_dma_off(desc, first_desc); dbri->next_desc[last_desc] = first_desc; dbri->pipes[info->pipe].first_desc = first_desc; dbri->pipes[info->pipe].desc = first_desc; @@ -1697,6 +1702,7 @@ calling dbri_process_interrupt_buffer(), which works even if the CPU's static void xmit_descs(struct snd_dbri *dbri) { struct dbri_streaminfo *info; + u32 dvma_addr = (u32)dbri->dma_dvma; s32 *cmd; unsigned long flags; int first_td; @@ -1718,7 +1724,7 @@ static void xmit_descs(struct snd_dbri *dbri) *(cmd++) = DBRI_CMD(D_SDP, 0, dbri->pipes[info->pipe].sdp | D_SDP_P | D_SDP_EVERY | D_SDP_C); - *(cmd++) = dbri->dma_dvma + + *(cmd++) = dvma_addr + dbri_dma_off(desc, first_td); dbri_cmdsend(dbri, cmd, 2); @@ -1740,7 +1746,7 @@ static void xmit_descs(struct snd_dbri *dbri) *(cmd++) = DBRI_CMD(D_SDP, 0, dbri->pipes[info->pipe].sdp | D_SDP_P | D_SDP_EVERY | D_SDP_C); - *(cmd++) = dbri->dma_dvma + + *(cmd++) = dvma_addr + dbri_dma_off(desc, first_td); dbri_cmdsend(dbri, cmd, 2); @@ -2539,7 +2545,7 @@ static int snd_dbri_create(struct snd_card *card, if (!dbri->dma) return -ENOMEM; - dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08x)\n", + dprintk(D_GEN, "DMA Cmd Block 0x%p (0x%08llx)\n", dbri->dma, dbri->dma_dvma); /* Map the registers into memory. */ -- 1.9.1

1 0