August 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource
by Axel Lin 30 Aug '15

30 Aug '15

Use devm_ioremap_resource() instead of open code. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/au1x/psc-i2s.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c index e742ef6..38e853a 100644 --- a/sound/soc/au1x/psc-i2s.c +++ b/sound/soc/au1x/psc-i2s.c @@ -305,19 +305,9 @@ static int au1xpsc_i2s_drvprobe(struct platform_device *pdev) return -ENOMEM; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iores) - return -ENODEV; - - ret = -EBUSY; - if (!devm_request_mem_region(&pdev->dev, iores->start, - resource_size(iores), - pdev->name)) - return -EBUSY; - - wd->mmio = devm_ioremap(&pdev->dev, iores->start, - resource_size(iores)); - if (!wd->mmio) - return -EBUSY; + wd->mmio = devm_ioremap_resource(&pdev->dev, iores); + if (IS_ERR(wd->mmio)) + return PTR_ERR(wd->mmio); dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); if (!dmares) -- 2.1.0

3 2

[alsa-devel] [PATCH] ASoC: sti_uniperif: Ensure component is unregistered when unload module
by Axel Lin 30 Aug '15

30 Aug '15

Use devm_snd_soc_register_component to ensure component is unregistered when unload the module. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/sti/sti_uniperif.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/sti/sti_uniperif.c b/sound/soc/sti/sti_uniperif.c index dffabf3..39bcefe 100644 --- a/sound/soc/sti/sti_uniperif.c +++ b/sound/soc/sti/sti_uniperif.c @@ -224,9 +224,9 @@ static int sti_uniperiph_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, priv); - ret = snd_soc_register_component(&pdev->dev, - &sti_uniperiph_dai_component, - priv->dai, 1); + ret = devm_snd_soc_register_component(&pdev->dev, + &sti_uniperiph_dai_component, + priv->dai, 1); if (ret < 0) return ret; -- 2.1.0

2 1

[alsa-devel] [PATCH] ASoC: zx296702-i2s: Fix resource leak when unload module
by Axel Lin 30 Aug '15

30 Aug '15

Use devm_* API to fix leaks in current code. 1. Use devm_kzalloc to fix memory leak for zx_i2s when unload the module. 2. Use devm_snd_soc_register_component to ensure component is unregistered when unload the module. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/zte/zx296702-i2s.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/zte/zx296702-i2s.c b/sound/soc/zte/zx296702-i2s.c index 1930c42..1cad93d 100644 --- a/sound/soc/zte/zx296702-i2s.c +++ b/sound/soc/zte/zx296702-i2s.c @@ -380,7 +380,7 @@ static int zx_i2s_probe(struct platform_device *pdev) struct zx_i2s_info *zx_i2s; int ret; - zx_i2s = kzalloc(sizeof(*zx_i2s), GFP_KERNEL); + zx_i2s = devm_kzalloc(&pdev->dev, sizeof(*zx_i2s), GFP_KERNEL); if (!zx_i2s) return -ENOMEM; @@ -401,8 +401,8 @@ static int zx_i2s_probe(struct platform_device *pdev) writel_relaxed(0, zx_i2s->reg_base + ZX_I2S_FIFO_CTRL); platform_set_drvdata(pdev, zx_i2s); - ret = snd_soc_register_component(&pdev->dev, &zx_i2s_component, - &zx_i2s_dai, 1); + ret = devm_snd_soc_register_component(&pdev->dev, &zx_i2s_component, + &zx_i2s_dai, 1); if (ret) { dev_err(&pdev->dev, "Register DAI failed: %d\n", ret); return ret; -- 2.1.0

3 2

[alsa-devel] [PATCH 1/3] ASoC: pxa-ssp: Convert to devm_snd_soc_register_component
by Axel Lin 30 Aug '15

30 Aug '15

Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/pxa/pxa-ssp.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index fbe2e93..3da485e 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -813,14 +813,8 @@ static const struct of_device_id pxa_ssp_of_ids[] = { static int asoc_ssp_probe(struct platform_device *pdev) { - return snd_soc_register_component(&pdev->dev, &pxa_ssp_component, - &pxa_ssp_dai, 1); -} - -static int asoc_ssp_remove(struct platform_device *pdev) -{ - snd_soc_unregister_component(&pdev->dev); - return 0; + return devm_snd_soc_register_component(&pdev->dev, &pxa_ssp_component, + &pxa_ssp_dai, 1); } static struct platform_driver asoc_ssp_driver = { @@ -830,7 +824,6 @@ static struct platform_driver asoc_ssp_driver = { }, .probe = asoc_ssp_probe, - .remove = asoc_ssp_remove, }; module_platform_driver(asoc_ssp_driver); -- 2.1.0

4 7

[alsa-devel] [PATCH 1/5] ASoC: au1x: Convert to devm_snd_soc_register_platform
by Axel Lin 30 Aug '15

30 Aug '15

Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/au1x/dbdma2.c | 11 ++--------- sound/soc/au1x/dma.c | 11 ++--------- 2 files changed, 4 insertions(+), 18 deletions(-) diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index dd94fea..5741c0a 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -344,14 +344,8 @@ static int au1xpsc_pcm_drvprobe(struct platform_device *pdev) platform_set_drvdata(pdev, dmadata); - return snd_soc_register_platform(&pdev->dev, &au1xpsc_soc_platform); -} - -static int au1xpsc_pcm_drvremove(struct platform_device *pdev) -{ - snd_soc_unregister_platform(&pdev->dev); - - return 0; + return devm_snd_soc_register_platform(&pdev->dev, + &au1xpsc_soc_platform); } static struct platform_driver au1xpsc_pcm_driver = { @@ -359,7 +353,6 @@ static struct platform_driver au1xpsc_pcm_driver = { .name = "au1xpsc-pcm", }, .probe = au1xpsc_pcm_drvprobe, - .remove = au1xpsc_pcm_drvremove, }; module_platform_driver(au1xpsc_pcm_driver); diff --git a/sound/soc/au1x/dma.c b/sound/soc/au1x/dma.c index 24cc7f4..fcf5a9ad 100644 --- a/sound/soc/au1x/dma.c +++ b/sound/soc/au1x/dma.c @@ -312,14 +312,8 @@ static int alchemy_pcm_drvprobe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); - return snd_soc_register_platform(&pdev->dev, &alchemy_pcm_soc_platform); -} - -static int alchemy_pcm_drvremove(struct platform_device *pdev) -{ - snd_soc_unregister_platform(&pdev->dev); - - return 0; + return devm_snd_soc_register_platform(&pdev->dev, + &alchemy_pcm_soc_platform); } static struct platform_driver alchemy_pcmdma_driver = { @@ -327,7 +321,6 @@ static struct platform_driver alchemy_pcmdma_driver = { .name = "alchemy-pcm-dma", }, .probe = alchemy_pcm_drvprobe, - .remove = alchemy_pcm_drvremove, }; module_platform_driver(alchemy_pcmdma_driver); -- 2.1.0

3 10

Re: [alsa-devel] [pulseaudio-discuss] sound is distorted when pulseaudio system timer scheduling is used (tsched=1)
by Raymond Yau 29 Aug '15

29 Aug '15

> > I am having issue with pulseaudiosink, > I used following command to play a wav file > gst-launch filesrc location=<wav file path> ! wavparse ! pulseaudiosink > > if tsched is enabled, then play of wav file via pulseaudiosink gives me lots of Underrun, and the sound is distorted, following is the pulseaudio log when --log-level=3 > > I: [pulseaudio] protocol-native.c: Got credentials: uid=0 gid=0 success=1 > I: [pulseaudio] sink-input.c: Trying to change sample rate > I: [pulseaudio] alsa-sink.c: Updating rate for device hw:0, new rate is 48000 > I: [pulseaudio] source.c: Changed sampling rate successfully > I: [pulseaudio] sink.c: Changed sampling rate successfully > I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Trying resume... > I: [alsa-sink-HiFi wm8962-0] alsa-util.c: cannot disable ALSA period wakeups > I: [alsa-sink-HiFi wm8962-0] alsa-util.c: ALSA period wakeups were not disabled > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Time scheduling watermark is 18.38ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Resumed successfully... > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Starting playback. > I: [pulseaudio] sink-input.c: Created input 0 "pulsesink probe" on alsa_output.platform-sound.analog-s > tereo with sample spec s16le 2ch 48000Hz and channel map front-left,front-right > I: [pulseaudio] sink-input.c: media.name = "pulsesink probe" > I: [pulseaudio] sink-input.c: application.name = "gst-launch-0.10" > I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client" > I: [pulseaudio] sink-input.c: native-protocol.version = "29" > I: [pulseaudio] sink-input.c: application.process.id = "985" > I: [pulseaudio] sink-input.c: application.process.user = "root" > I: [pulseaudio] sink-input.c: application.process.host = "mx6q" > I: [pulseaudio] sink-input.c: application.process.binary = "gst-launch-0.10" > I: [pulseaudio] sink-input.c: application.language = "C" > I: [pulseaudio] sink-input.c: application.process.machine_id = "0aa7a9566c734f608cbd36f187de8645" > I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:gst-launc > h-0.10" > I: [pulseaudio] protocol-native.c: Requested tlength=250.00 ms, minreq=20.00 ms > I: [pulseaudio] protocol-native.c: Final latency 250.00 ms = 105.00 ms + 2*20.00 ms + 105.00 ms > I: [pulseaudio] sink-input.c: Freeing input 0 "pulsesink probe" > I: [pulseaudio] sink-input.c: Created input 1 "Playback Stream" on alsa_output.platform-sound.analog-s > tereo with sample spec s16le 2ch 48000Hz and channel map front-left,front-right > I: [pulseaudio] sink-input.c: media.name = "Playback Stream" > I: [pulseaudio] sink-input.c: application.name = "gst-launch-0.10" > I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client" > I: [pulseaudio] sink-input.c: native-protocol.version = "29" > I: [pulseaudio] sink-input.c: application.process.id = "985" > I: [pulseaudio] sink-input.c: application.process.user = "root" > I: [pulseaudio] sink-input.c: application.process.host = "mx6q" > I: [pulseaudio] sink-input.c: application.process.binary = "gst-launch-0.10" > I: [pulseaudio] sink-input.c: application.language = "C" > I: [pulseaudio] sink-input.c: application.process.machine_id = "0aa7a9566c734f608cbd36f187de8645" > I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:gst-launc > h-0.10" > I: [pulseaudio] protocol-native.c: Requested tlength=200.00 ms, minreq=10.00 ms > I: [pulseaudio] protocol-native.c: Final latency 200.00 ms = 90.00 ms + 2*10.00 ms + 90.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 28.38 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 38.38 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 48.38 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 58.38 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 68.38 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 78.38 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 80.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 1.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 2.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 4.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 8.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 16.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 26.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 36.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 46.00 ms > E: [alsa-sink-HiFi wm8962-0] alsa-sink.c: ALSA woke us up to write new data to the device, but there w > as actually nothing to write! > E: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Most likely this is a bug in the ALSA driver '(null)'. Pleas > e report this issue to the ALSA developers. > E: [alsa-sink-HiFi wm8962-0] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent sn > d_pcm_avail() returned 0 or another value < min_avail. > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 56.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 66.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 76.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 86.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 96.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 86.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 106.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 96.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 116.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 106.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 126.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 116.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 136.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 126.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Underrun! > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 146.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Underrun! > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 136.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Underrun! > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 156.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 146.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 166.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing wakeup watermark to 156.00 ms > I: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Increasing minimal latency to 176.00 ms > I: [pulseaudio] sink-input.c: Freeing input 1 "Playback Stream" > I: [pulseaudio] client.c: Freed 4 "gst-launch-0.10" > I: [pulseaudio] protocol-native.c: Connection died. > > from the log it seems like, when system timer based scheduling is used, then pulseaudio will try to keep minimum watermark/latency, only when Underrun occurs, it will increase watermark/latency. > > Is this the expected behaviour of pulseaudio 'glict free' feature? > And from the log there is some error message complain about ALSA driver > E: [alsa-sink-HiFi wm8962-0] alsa-sink.c: ALSA woke us up to write new data to the device, but there w > as actually nothing to write! > E: [alsa-sink-HiFi wm8962-0] alsa-sink.c: Most likely this is a bug in the ALSA driver '(null)'. Pleas > e report this issue to the ALSA developers. > E: [alsa-sink-HiFi wm8962-0] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent sn > d_pcm_avail() returned 0 or another value < min_avail. > > does this mean, there is some bug in ALSA driver, or it just indicates the ALSA driver doesn't support glitch free feature very well The timer base scheduling require sound card driver provide accurate hw_ptr position at any time. So far only two sound card drivers snd-hda-intel and snd-oxygen can provide accurate hw_ptr position from hardware register static snd_pcm_uframes_t dmaengine_pcm_pointer( struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct dmaengine_pcm *pcm = soc_platform_to_pcm(rtd->platform); if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE) return snd_dmaengine_pcm_pointer_no_residue(substream); else return snd_dmaengine_pcm_pointer(substream); } http://lxr.free-electrons.com/ident?i=dmaengine_tx_status Seem none of soc sound drivers can report position accurate than period size Is there any reason to enable timer based scheduling by default ? http://mailman.alsa-project.org/pipermail/alsa-devel/2014-September/081501.… You can try alexandra 's program to find out how accuate hw_ptr can your sound card driver can report ?

1 0

[alsa-devel] [PATCH] ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure
by Takashi Sakamoto 29 Aug '15

29 Aug '15

In PCM core, when hw_params() in each driver returns error, the state of PCM substream is kept as 'open'. In this case, current drivers for sound units on IEEE 1394 bus doesn't decrement substream counter in hw_free() correctly. This causes these drivers to keep streams even if not required. This commit fixes this bug. When snd_pcm_lib_alloc_vmalloc_buffer() fails, hw_params function in each driver returns without incrementing the counter. Reported-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/bebob/bebob_pcm.c | 20 ++++++++++++++++---- sound/firewire/dice/dice-pcm.c | 18 ++++++++++++++---- sound/firewire/fireworks/fireworks_pcm.c | 18 ++++++++++++++---- sound/firewire/oxfw/oxfw-pcm.c | 17 +++++++++++++---- 4 files changed, 57 insertions(+), 16 deletions(-) diff --git a/sound/firewire/bebob/bebob_pcm.c b/sound/firewire/bebob/bebob_pcm.c index 7a2c1f5..c0f018a 100644 --- a/sound/firewire/bebob/bebob_pcm.c +++ b/sound/firewire/bebob/bebob_pcm.c @@ -211,26 +211,38 @@ pcm_capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_bebob *bebob = substream->private_data; + int err; + + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) atomic_inc(&bebob->substreams_counter); amdtp_stream_set_pcm_format(&bebob->tx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + + return 0; } static int pcm_playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_bebob *bebob = substream->private_data; + int err; + + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) atomic_inc(&bebob->substreams_counter); amdtp_stream_set_pcm_format(&bebob->rx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + + return 0; } static int diff --git a/sound/firewire/dice/dice-pcm.c b/sound/firewire/dice/dice-pcm.c index f7771451..4e67b1d 100644 --- a/sound/firewire/dice/dice-pcm.c +++ b/sound/firewire/dice/dice-pcm.c @@ -230,6 +230,12 @@ static int capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_dice *dice = substream->private_data; + int err; + + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) { mutex_lock(&dice->mutex); @@ -240,13 +246,18 @@ static int capture_hw_params(struct snd_pcm_substream *substream, amdtp_stream_set_pcm_format(&dice->tx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + return 0; } static int playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_dice *dice = substream->private_data; + int err; + + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) { mutex_lock(&dice->mutex); @@ -257,8 +268,7 @@ static int playback_hw_params(struct snd_pcm_substream *substream, amdtp_stream_set_pcm_format(&dice->rx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + return 0; } static int capture_hw_free(struct snd_pcm_substream *substream) diff --git a/sound/firewire/fireworks/fireworks_pcm.c b/sound/firewire/fireworks/fireworks_pcm.c index 8a34753..c30b2ff 100644 --- a/sound/firewire/fireworks/fireworks_pcm.c +++ b/sound/firewire/fireworks/fireworks_pcm.c @@ -244,25 +244,35 @@ static int pcm_capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_efw *efw = substream->private_data; + int err; + + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) atomic_inc(&efw->capture_substreams); amdtp_stream_set_pcm_format(&efw->tx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + return 0; } static int pcm_playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_efw *efw = substream->private_data; + int err; + + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) atomic_inc(&efw->playback_substreams); amdtp_stream_set_pcm_format(&efw->rx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + return 0; } static int pcm_capture_hw_free(struct snd_pcm_substream *substream) diff --git a/sound/firewire/oxfw/oxfw-pcm.c b/sound/firewire/oxfw/oxfw-pcm.c index 67ade07..9c73930 100644 --- a/sound/firewire/oxfw/oxfw-pcm.c +++ b/sound/firewire/oxfw/oxfw-pcm.c @@ -231,7 +231,12 @@ static int pcm_capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_oxfw *oxfw = substream->private_data; + int err; + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) { mutex_lock(&oxfw->mutex); @@ -241,13 +246,18 @@ static int pcm_capture_hw_params(struct snd_pcm_substream *substream, amdtp_stream_set_pcm_format(&oxfw->tx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + return 0; } static int pcm_playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { struct snd_oxfw *oxfw = substream->private_data; + int err; + + err = snd_pcm_lib_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + if (err < 0) + return err; if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) { mutex_lock(&oxfw->mutex); @@ -257,8 +267,7 @@ static int pcm_playback_hw_params(struct snd_pcm_substream *substream, amdtp_stream_set_pcm_format(&oxfw->rx_stream, params_format(hw_params)); - return snd_pcm_lib_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); + return 0; } static int pcm_capture_hw_free(struct snd_pcm_substream *substream) -- 2.1.4

3 2

[alsa-devel] [PATCH 00/25 v2] ALSA: support AMDTP variants
by Takashi Sakamoto 29 Aug '15

29 Aug '15

This patchset for Linux 4.3 updates my previous one: [alsa-devel] [PATCH 00/25] ALSA: support AMDTP variants http://mailman.alsa-project.org/pipermail/alsa-devel/2015-August/096338.html As the same as the previous, the second patch is too large to be blasted by mailing list server. I request server administrators to grant it. Changes: * Enable to select as kernel module or the others. * Add a comment for memory barriers in firewire-lib. * Add a comment about using jiffies in firewire-lib. * Use jiffies_64 helpers instead of jiffies helpers in firewire-lib. Rest of work: * Using proper clocksource for MIDI throttle in asynchronous transaction helper. * Handling control/status messages for TASCAM driver. * Supporting MIDI exclusive message in outgoing packets for TASCAM driver. * Researching a mechanism to de-synchronize sometimes for Digi00x family. You can see this patchset as a part in this branch. https://github.com/takaswie/sound/tree/amdtp-variants Takashi Sakamoto (25): ALSA: firewire-lib: rename 'amdtp' to 'amdtp-stream' for functional separation ALSA: firewire-lib: functional separation for packet transmission layer and data processing layer ALSA: firewire-lib: add helper functions for asynchronous MIDI port ALSA: firewire-lib: add a restriction for a transaction at once ALSA: firewire-lib: schedule tasklet again when MIDI substream has rest of MIDI messages ALSA: firewire-lib: add throttle for MIDI data rate ALSA: firewire-lib: avoid endless loop to transfer MIDI messages at fatal error ALSA: firewire-digi00x: add skeleton for Digi 002/003 family ALSA: firewire-digi00x: add data processing layer ALSA: firewire-digi00x: add stream functionality ALSA: firewire-digi00x: add proc node to show clock status ALSA: firewire-digi00x: add PCM functionality ALSA: firewire-digi00x: add MIDI functionality ALSA: firewire-digi00x: add hwdep interface ALSA: firewire-digi00x: add support for asynchronous messaging ALSA: firewire-digi00x: add support for MIDI ports for machine control ALSA: firewire-tascam: add skeleton for TASCAM FireWire series ALSA: firewire-tascam: add a structure for model-dependent parameters. ALSA: firewire-tascam: add proc node to show firmware information ALSA: firewire-tascam: add data processing layer ALSA: firewire-tascam: add streaming functionality ALSA: firewire-tascam: add PCM functionality ALSA: firewire-tascam: add transaction functionality ALSA: firewire-tascam: add MIDI functionality ALSA: firewire-tascam: add hwdep interface include/uapi/sound/asound.h | 4 +- include/uapi/sound/firewire.h | 9 + sound/firewire/Kconfig | 27 ++ sound/firewire/Makefile | 4 +- sound/firewire/amdtp-am824.c | 451 ++++++++++++++++++++++++ sound/firewire/amdtp-am824.h | 47 +++ sound/firewire/{amdtp.c => amdtp-stream.c} | 375 ++++---------------- sound/firewire/{amdtp.h => amdtp-stream.h} | 113 ++---- sound/firewire/bebob/bebob.h | 2 +- sound/firewire/bebob/bebob_midi.c | 16 +- sound/firewire/bebob/bebob_pcm.c | 12 +- sound/firewire/bebob/bebob_stream.c | 34 +- sound/firewire/dice/dice-midi.c | 16 +- sound/firewire/dice/dice-pcm.c | 12 +- sound/firewire/dice/dice-stream.c | 41 ++- sound/firewire/dice/dice.h | 2 +- sound/firewire/digi00x/Makefile | 4 + sound/firewire/digi00x/amdtp-dot.c | 436 +++++++++++++++++++++++ sound/firewire/digi00x/digi00x-hwdep.c | 200 +++++++++++ sound/firewire/digi00x/digi00x-midi.c | 198 +++++++++++ sound/firewire/digi00x/digi00x-pcm.c | 353 +++++++++++++++++++ sound/firewire/digi00x/digi00x-proc.c | 99 ++++++ sound/firewire/digi00x/digi00x-stream.c | 422 +++++++++++++++++++++++ sound/firewire/digi00x/digi00x-transaction.c | 137 ++++++++ sound/firewire/digi00x/digi00x.c | 174 ++++++++++ sound/firewire/digi00x/digi00x.h | 157 +++++++++ sound/firewire/fcp.c | 2 +- sound/firewire/fireworks/fireworks.c | 12 +- sound/firewire/fireworks/fireworks.h | 2 +- sound/firewire/fireworks/fireworks_midi.c | 16 +- sound/firewire/fireworks/fireworks_pcm.c | 10 +- sound/firewire/fireworks/fireworks_stream.c | 8 +- sound/firewire/lib.c | 147 ++++++++ sound/firewire/lib.h | 52 +++ sound/firewire/oxfw/oxfw-midi.c | 16 +- sound/firewire/oxfw/oxfw-pcm.c | 10 +- sound/firewire/oxfw/oxfw-stream.c | 11 +- sound/firewire/oxfw/oxfw.h | 2 +- sound/firewire/tascam/Makefile | 4 + sound/firewire/tascam/amdtp-tascam.c | 248 +++++++++++++ sound/firewire/tascam/tascam-hwdep.c | 202 +++++++++++ sound/firewire/tascam/tascam-midi.c | 162 +++++++++ sound/firewire/tascam/tascam-pcm.c | 298 ++++++++++++++++ sound/firewire/tascam/tascam-proc.c | 88 +++++ sound/firewire/tascam/tascam-stream.c | 497 +++++++++++++++++++++++++++ sound/firewire/tascam/tascam-transaction.c | 291 ++++++++++++++++ sound/firewire/tascam/tascam.c | 230 +++++++++++++ sound/firewire/tascam/tascam.h | 140 ++++++++ 48 files changed, 5295 insertions(+), 498 deletions(-) create mode 100644 sound/firewire/amdtp-am824.c create mode 100644 sound/firewire/amdtp-am824.h rename sound/firewire/{amdtp.c => amdtp-stream.c} (70%) rename sound/firewire/{amdtp.h => amdtp-stream.h} (77%) create mode 100644 sound/firewire/digi00x/Makefile create mode 100644 sound/firewire/digi00x/amdtp-dot.c create mode 100644 sound/firewire/digi00x/digi00x-hwdep.c create mode 100644 sound/firewire/digi00x/digi00x-midi.c create mode 100644 sound/firewire/digi00x/digi00x-pcm.c create mode 100644 sound/firewire/digi00x/digi00x-proc.c create mode 100644 sound/firewire/digi00x/digi00x-stream.c create mode 100644 sound/firewire/digi00x/digi00x-transaction.c create mode 100644 sound/firewire/digi00x/digi00x.c create mode 100644 sound/firewire/digi00x/digi00x.h create mode 100644 sound/firewire/tascam/Makefile create mode 100644 sound/firewire/tascam/amdtp-tascam.c create mode 100644 sound/firewire/tascam/tascam-hwdep.c create mode 100644 sound/firewire/tascam/tascam-midi.c create mode 100644 sound/firewire/tascam/tascam-pcm.c create mode 100644 sound/firewire/tascam/tascam-proc.c create mode 100644 sound/firewire/tascam/tascam-stream.c create mode 100644 sound/firewire/tascam/tascam-transaction.c create mode 100644 sound/firewire/tascam/tascam.c create mode 100644 sound/firewire/tascam/tascam.h -- 2.1.4

2 35

[alsa-devel] [PATCH] ASoC: nau8825: Add driver for headset chip Nuvoton 8825
by Anatol Pomozov 29 Aug '15

29 Aug '15

Signed-off-by: Anatol Pomozov <anatol.pomozov(a)gmail.com> --- .../devicetree/bindings/sound/nau8825.txt | 14 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/nau8825.c | 860 +++++++++++++++++++++ sound/soc/codecs/nau8825.h | 258 +++++++ 5 files changed, 1138 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nau8825.txt create mode 100644 sound/soc/codecs/nau8825.c create mode 100644 sound/soc/codecs/nau8825.h diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt new file mode 100644 index 0000000..0334be3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8825.txt @@ -0,0 +1,14 @@ +Nuvoton NAU8825 audio codec + +This device supports I2C only. + +Required properties: + - compatible : Must be "nuvoton,nau8825" + - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). + +Example: + + codec: nau8825@1a { + compatible = "nuvoton,nau8825"; + reg = <0x1a>; + }; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 7fcbc22..1a3639c 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -78,6 +78,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MAX9877 if I2C select SND_SOC_MC13783 if MFD_MC13XXX select SND_SOC_ML26124 if I2C + select SND_SOC_NAU8825 if I2C select SND_SOC_HDMI_CODEC select SND_SOC_PCM1681 if I2C select SND_SOC_PCM1792A if SPI_MASTER @@ -892,6 +893,9 @@ config SND_SOC_MC13783 config SND_SOC_ML26124 tristate +config SND_SOC_NAU8825 + tristate + config SND_SOC_TPA6130A2 tristate "Texas Instruments TPA6130A2 headphone amplifier" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 5b46c8f..4874881 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -71,6 +71,7 @@ snd-soc-max98925-objs := max98925.o snd-soc-max9850-objs := max9850.o snd-soc-mc13783-objs := mc13783.o snd-soc-ml26124-objs := ml26124.o +snd-soc-nau8825-objs := nau8825.o snd-soc-hdmi-codec-objs := hdmi.o snd-soc-pcm1681-objs := pcm1681.o snd-soc-pcm1792a-codec-objs := pcm1792a.o @@ -262,6 +263,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o +obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o obj-$(CONFIG_SND_SOC_PCM1792A) += snd-soc-pcm1792a-codec.o diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c new file mode 100644 index 0000000..1c99308b --- /dev/null +++ b/sound/soc/codecs/nau8825.c @@ -0,0 +1,860 @@ +/* + * NAU8825 audio codec driver + * + * Copyright 2015 Nuvoton Technology Corp. + * Copyright 2015 Google Chromium project. + * Author: Anatol Pomozov <anatol(a)chromium.org> + * + * Licensed under the GPL-2. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <linux/input.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/jack.h> + +#include "nau8825.h" + +struct nau8825 { + struct device *dev; + struct regmap *regmap; + struct snd_soc_dapm_context *dapm; + int irq; + struct snd_soc_jack *jack; + int button_pressed; +}; + +static const struct reg_default nau8825_reg_defaults[] = { + { NAU8825_REG_ENA_CTRL, 0x00ff }, + { NAU8825_REG_CLK_DIVIDER, 0x0050 }, + { NAU8825_REG_FLL1, 0x0 }, + { NAU8825_REG_FLL2, 0x3126 }, + { NAU8825_REG_FLL3, 0x0008 }, + { NAU8825_REG_FLL4, 0x0010 }, + { NAU8825_REG_FLL5, 0x0 }, + { NAU8825_REG_FLL6, 0x6000 }, + { NAU8825_REG_FLL_VCO_RSV, 0xf13c }, + { NAU8825_REG_HSD_CTRL, 0x000c }, + { NAU8825_REG_JACK_DET_CTRL, 0x0 }, + { NAU8825_REG_INTERRUPT_MASK, 0x0 }, + { NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff }, + { NAU8825_REG_SAR_CTRL, 0x0015 }, + { NAU8825_REG_KEYDET_CTRL, 0x0110 }, + { NAU8825_REG_VDET_THRESHOLD_1, 0x0 }, + { NAU8825_REG_VDET_THRESHOLD_2, 0x0 }, + { NAU8825_REG_VDET_THRESHOLD_3, 0x0 }, + { NAU8825_REG_VDET_THRESHOLD_4, 0x0 }, + { NAU8825_REG_GPIO34_CTRL, 0x0 }, + { NAU8825_REG_GPIO12_CTRL, 0x0 }, + { NAU8825_REG_TDM_CTRL, 0x0 }, + { NAU8825_REG_I2S_PCM_CTRL1, 0x000b }, + { NAU8825_REG_I2S_PCM_CTRL2, 0x8010 }, + { NAU8825_REG_LEFT_TIME_SLOT, 0x0 }, + { NAU8825_REG_RIGHT_TIME_SLOT, 0x0 }, + { NAU8825_REG_BIQ_CTRL, 0x0 }, + { NAU8825_REG_BIQ_COF1, 0x0 }, + { NAU8825_REG_BIQ_COF2, 0x0 }, + { NAU8825_REG_BIQ_COF3, 0x0 }, + { NAU8825_REG_BIQ_COF4, 0x0 }, + { NAU8825_REG_BIQ_COF5, 0x0 }, + { NAU8825_REG_BIQ_COF6, 0x0 }, + { NAU8825_REG_BIQ_COF7, 0x0 }, + { NAU8825_REG_BIQ_COF8, 0x0 }, + { NAU8825_REG_BIQ_COF9, 0x0 }, + { NAU8825_REG_BIQ_COF10, 0x0 }, + { NAU8825_REG_ADC_RATE, 0x0010 }, + { NAU8825_REG_DAC_CTRL1, 0x0001 }, + { NAU8825_REG_DAC_CTRL2, 0x0 }, + { NAU8825_REG_DAC_DGAIN_CTRL, 0x0 }, + { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf }, + { NAU8825_REG_MUTE_CTRL, 0x0 }, + { NAU8825_REG_HSVOL_CTRL, 0x0 }, + { NAU8825_REG_DACL_CTRL, 0x02cf }, + { NAU8825_REG_DACR_CTRL, 0x00cf }, + { NAU8825_REG_ADC_DRC_KNEE_IP12, 0x1486 }, + { NAU8825_REG_ADC_DRC_KNEE_IP34, 0x0f12 }, + { NAU8825_REG_ADC_DRC_SLOPES, 0x25ff }, + { NAU8825_REG_ADC_DRC_ATKDCY, 0x3457 }, + { NAU8825_REG_DAC_DRC_KNEE_IP12, 0x1486 }, + { NAU8825_REG_DAC_DRC_KNEE_IP34, 0x0f12 }, + { NAU8825_REG_DAC_DRC_SLOPES, 0x25f9 }, + { NAU8825_REG_DAC_DRC_ATKDCY, 0x3457 }, + { NAU8825_REG_IMM_MODE_CTRL, 0x0 }, + { NAU8825_REG_CLASSG_CTRL, 0x0 }, + { NAU8825_REG_OPT_EFUSE_CTRL, 0x0 }, + { NAU8825_REG_MISC_CTRL, 0x0 }, + { NAU8825_REG_BIAS_ADJ, 0x0 }, + { NAU8825_REG_TRIM_SETTINGS, 0x0 }, + { NAU8825_REG_ANALOG_CONTROL_1, 0x0 }, + { NAU8825_REG_ANALOG_CONTROL_2, 0x0 }, + { NAU8825_REG_ANALOG_ADC_1, 0x0011 }, + { NAU8825_REG_ANALOG_ADC_2, 0x0020 }, + { NAU8825_REG_RDAC, 0x0008 }, + { NAU8825_REG_MIC_BIAS, 0x0006 }, + { NAU8825_REG_BOOST, 0x0 }, + { NAU8825_REG_FEPGA, 0x0 }, + { NAU8825_REG_POWER_UP_CONTROL, 0x0 }, + { NAU8825_REG_CHARGE_PUMP, 0x0 }, +}; + +static bool nau8825_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8825_REG_ENA_CTRL: + case NAU8825_REG_CLK_DIVIDER ... NAU8825_REG_FLL_VCO_RSV: + case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL: + case NAU8825_REG_INTERRUPT_MASK ... NAU8825_REG_KEYDET_CTRL: + case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL: + case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY: + case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY: + case NAU8825_REG_IMM_MODE_CTRL ... NAU8825_REG_IMM_RMS_R: + case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL: + case NAU8825_REG_MISC_CTRL: + case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_SARDOUT_RAM_STATUS: + case NAU8825_REG_BIAS_ADJ: + case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2: + case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS: + case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA: + case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_GENERAL_STATUS: + return true; + default: + return false; + } + +} + +static bool nau8825_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8825_REG_RESET ... NAU8825_REG_ENA_CTRL: + case NAU8825_REG_CLK_DIVIDER ... NAU8825_REG_FLL_VCO_RSV: + case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL: + case NAU8825_REG_INTERRUPT_MASK: + case NAU8825_REG_INT_CLR_KEY_STATUS ... NAU8825_REG_KEYDET_CTRL: + case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL: + case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY: + case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY: + case NAU8825_REG_IMM_MODE_CTRL: + case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL: + case NAU8825_REG_MISC_CTRL: + case NAU8825_REG_BIAS_ADJ: + case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2: + case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS: + case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA: + case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_CHARGE_PUMP: + return true; + default: + return false; + } +} + +static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8825_REG_RESET: + case NAU8825_REG_IRQ_STATUS: + case NAU8825_REG_INT_CLR_KEY_STATUS: + case NAU8825_REG_IMM_RMS_L: + case NAU8825_REG_IMM_RMS_R: + case NAU8825_REG_I2C_DEVICE_ID: + case NAU8825_REG_SARDOUT_RAM_STATUS: + case NAU8825_REG_CHARGE_PUMP_INPUT_READ: + case NAU8825_REG_GENERAL_STATUS: + return true; + default: + return false; + } +} + +static const DECLARE_TLV_DB_MINMAX_MUTE(adc_vol_tlv, -10300, 2400); +static const DECLARE_TLV_DB_MINMAX_MUTE(sidetone_vol_tlv, -4200, 0); +static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -5400, 0); +static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600); + +static const struct snd_kcontrol_new nau8825_snd_controls[] = { + SOC_SINGLE_TLV("MIC Volume", NAU8825_REG_ADC_DGAIN_CTRL, + 0, 0xff, 0, adc_vol_tlv), + SOC_DOUBLE_TLV("HP Sidetone Volume", NAU8825_REG_ADC_DGAIN_CTRL, + 12, 8, 0x0f, 0, sidetone_vol_tlv), + SOC_DOUBLE_TLV("HP Volume", NAU8825_REG_HSVOL_CTRL, + 6, 0, 0x3f, 1, dac_vol_tlv), + SOC_SINGLE_TLV("Frontend PGA Gain", NAU8825_REG_POWER_UP_CONTROL, + 8, 37, 0, fepga_gain_tlv), +}; + +static int nau8825_charge_pump_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + struct regmap *regmap = nau8825->regmap; + + if (SND_SOC_DAPM_EVENT_ON(event)) { + regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW, NAU8825_JAMNODCLOW); + } else { + regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW, 0); + } + + return 0; +} + +static int nau8825_output_driver_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + struct regmap *regmap = nau8825->regmap; + + if (SND_SOC_DAPM_EVENT_ON(event)) { + /* Power Up L and R Output Drivers */ + regmap_update_bits(regmap, NAU8825_REG_POWER_UP_CONTROL, 0x3c, + 0x3c); + /* Power up Main Output Drivers (The main driver must be turned + on after the predriver to avoid pops) */ + regmap_update_bits(regmap, NAU8825_REG_POWER_UP_CONTROL, 0x3, + 0x3); + } else { + /* Power Down L and R Output Drivers */ + regmap_update_bits(regmap, NAU8825_REG_POWER_UP_CONTROL, 0x3f, + 0x0); + } + + return 0; +} + +/* DAC Mux 0x33[9] and 0x34[9] */ +static const char * const nau8825_dac_src[] = { + "DACL", "DACR", +}; + +static SOC_ENUM_SINGLE_DECL( + nau8825_dacl_enum, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_SFT, nau8825_dac_src); + +static SOC_ENUM_SINGLE_DECL( + nau8825_dacr_enum, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_SFT, nau8825_dac_src); + +static const struct snd_kcontrol_new nau8825_dacl_mux = + SOC_DAPM_ENUM("DACL Source", nau8825_dacl_enum); + +static const struct snd_kcontrol_new nau8825_dacr_mux = + SOC_DAPM_ENUM("DACR Source", nau8825_dacr_enum); + +static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("MIC"), + SND_SOC_DAPM_MICBIAS("MICBIAS", NAU8825_REG_MIC_BIAS, 8, 0), + + SND_SOC_DAPM_PGA("Frontend PGA", NAU8825_REG_POWER_UP_CONTROL, 14, 0, + NULL, 0), + + SND_SOC_DAPM_ADC("ADC", NULL, NAU8825_REG_ENA_CTRL, 8, 0), + SND_SOC_DAPM_SUPPLY("ADC Clock", NAU8825_REG_ENA_CTRL, 7, 0, NULL, 0), + + /* ADC for button press detection */ + SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_ADC_EN_SFT, 0), + + SND_SOC_DAPM_DAC("ADACL", NULL, NAU8825_REG_RDAC, 12, 0), + SND_SOC_DAPM_DAC("ADACR", NULL, NAU8825_REG_RDAC, 13, 0), + SND_SOC_DAPM_SUPPLY("ADACL Clock", NAU8825_REG_RDAC, 8, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADACR Clock", NAU8825_REG_RDAC, 9, 0, NULL, 0), + + SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR_SFT, 0), + SND_SOC_DAPM_DAC("DDACL", NULL, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACL_SFT, 0), + SND_SOC_DAPM_SUPPLY("DDAC Clock", NAU8825_REG_ENA_CTRL, 6, 0, NULL, 0), + + SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, + &nau8825_dacl_mux), + SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, + &nau8825_dacr_mux), + + SND_SOC_DAPM_PGA("HP amp L", NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("HP amp R", NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("HP amp power", NAU8825_REG_CLASSG_CTRL, 0, 0, NULL, + 0), + + SND_SOC_DAPM_SUPPLY("Change Pump", NAU8825_REG_CHARGE_PUMP, 5, 0, + nau8825_charge_pump_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + + SND_SOC_DAPM_SUPPLY("DACL Power", NAU8825_REG_CHARGE_PUMP, 8, 1, NULL, + 0), + SND_SOC_DAPM_SUPPLY("DACR Power", NAU8825_REG_CHARGE_PUMP, 9, 1, NULL, + 0), + + SND_SOC_DAPM_OUT_DRV_E("Output Driver", SND_SOC_NOPM, 0, 0, NULL, 0, + nau8825_output_driver_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_OUTPUT("HPOL"), + SND_SOC_DAPM_OUTPUT("HPOR"), +}; + +static const struct snd_soc_dapm_route nau8825_dapm_routes[] = { + {"Frontend PGA", NULL, "MIC"}, + {"ADC", NULL, "Frontend PGA"}, + {"ADC", NULL, "ADC Clock"}, + {"Capture", NULL, "ADC"}, + + {"DDACL", NULL, "Playback"}, + {"DDACR", NULL, "Playback"}, + {"DDACL", NULL, "DDAC Clock"}, + {"DDACR", NULL, "DDAC Clock"}, + {"DDACL", NULL, "DACL Power"}, + {"DDACR", NULL, "DACR Power"}, + {"DACL Mux", "DACL", "DDACL"}, + {"DACL Mux", "DACR", "DDACR"}, + {"DACR Mux", "DACL", "DDACL"}, + {"DACR Mux", "DACR", "DDACR"}, + {"HP amp L", NULL, "Change Pump"}, + {"HP amp R", NULL, "Change Pump"}, + {"HP amp L", NULL, "DACL Mux"}, + {"HP amp R", NULL, "DACR Mux"}, + {"HP amp L", NULL, "HP amp power"}, + {"HP amp R", NULL, "HP amp power"}, + {"ADACL", NULL, "HP amp L"}, + {"ADACR", NULL, "HP amp R"}, + {"ADACL", NULL, "ADACL Clock"}, + {"ADACR", NULL, "ADACR Clock"}, + {"Output Driver", NULL, "ADACL"}, + {"Output Driver", NULL, "ADACR"}, + {"HPOL", NULL, "Output Driver"}, + {"HPOR", NULL, "Output Driver"}, +}; + +static int nau8825_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + unsigned int val_len = 0; + + switch (params_width(params)) { + case 16: + val_len |= NAU8825_I2S_DL_16; + break; + case 20: + val_len |= NAU8825_I2S_DL_20; + break; + case 24: + val_len |= NAU8825_I2S_DL_24; + break; + case 32: + val_len |= NAU8825_I2S_DL_32; + break; + default: + return -EINVAL; + } + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, + NAU8825_I2S_DL_MASK, val_len); + + return 0; +} + +static int nau8825_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + int reg_val; + + reg_val = mute ? NAU8825_HP_MUTE : 0; + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, + NAU8825_HP_MUTE, reg_val); + + return 0; +} + +static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + unsigned int ctrl1_val = 0, ctrl2_val = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + ctrl2_val |= NAU8825_I2S_MS_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + ctrl1_val |= NAU8825_I2S_BP_INV; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ctrl1_val |= NAU8825_I2S_DF_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + ctrl1_val |= NAU8825_I2S_DF_LEFT; + break; + case SND_SOC_DAIFMT_RIGHT_J: + ctrl1_val |= NAU8825_I2S_DF_RIGTH; + break; + case SND_SOC_DAIFMT_DSP_A: + ctrl1_val |= NAU8825_I2S_DF_PCM_AB; + break; + case SND_SOC_DAIFMT_DSP_B: + ctrl1_val |= NAU8825_I2S_DF_PCM_AB; + ctrl1_val |= NAU8825_I2S_PCMB_EN; + break; + default: + return -EINVAL; + } + + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, + NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK | + NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK, + ctrl1_val); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, ctrl2_val); + + return 0; +} + +static const struct snd_soc_dai_ops nau8825_dai_ops = { + .hw_params = nau8825_hw_params, + .digital_mute = nau8825_mute, + .set_fmt = nau8825_set_dai_fmt, +}; + +#define NAU8825_RATES SNDRV_PCM_RATE_8000_192000 +#define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ + | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver nau8825_dai = { + .name = "nau8825-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = NAU8825_RATES, + .formats = NAU8825_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 1, + .rates = NAU8825_RATES, + .formats = NAU8825_FORMATS, + }, + .ops = &nau8825_dai_ops, +}; + +/** + * nau8825_enable_jack_detect - Specify a jack for event reporting + * + * @component: component to register the jack with + * @jack: jack to use to report headset and button events on + * + * After this function has been called the headset insert/remove and button + * events will be routed to the given jack. Jack can be null to stop + * reporting. + */ +int nau8825_enable_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA); + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP); + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); + + nau8825->jack = jack; + + return 0; +} +EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect); + + +static bool nau8825_is_jack_inserted(struct regmap *regmap) +{ + int status; + + regmap_read(regmap, NAU8825_REG_I2C_DEVICE_ID, &status); + return !(status & NAU8825_GPIO2JD1); +} + +static void nau8825_restart_jack_detection(struct regmap *regmap) +{ + /* this will restart the entire jack detection process including MIC/GND + * switching and create interrupts. We have to go from 0 to 1 and back + * to 0 to restart. + */ + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_RESTART, NAU8825_JACK_DET_RESTART); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_RESTART, 0); +} + +static void nau8825_eject_jack(struct nau8825 *nau8825) +{ + struct snd_soc_dapm_context *dapm = nau8825->dapm; + struct regmap *regmap = nau8825->regmap; + + snd_soc_dapm_disable_pin(dapm, "SAR"); + snd_soc_dapm_disable_pin(dapm, "MICBIAS"); + /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0); + /* ground HPL/HPR, MICGRND1/2 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0xf, 0xf); + + snd_soc_dapm_sync(dapm); +} + +static int nau8825_button_decode(int value) +{ + int buttons; + + if (value & BIT(0)) + buttons |= SND_JACK_BTN_0; + if (value & BIT(1)) + buttons |= SND_JACK_BTN_1; + if (value & BIT(2)) + buttons |= SND_JACK_BTN_2; + if (value & BIT(3)) + buttons |= SND_JACK_BTN_3; + + return buttons; +} + +static int nau8825_jack_insert(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + struct snd_soc_dapm_context *dapm = nau8825->dapm; + int jack_status_reg, mic_detected; + int type; + + regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg); + mic_detected = (jack_status_reg >> 10) & 3; + + switch (mic_detected) { + case 0: + /* no mic */ + type = SND_JACK_HEADPHONE; + break; + case 1: + dev_info(nau8825->dev, "OMTP (micgnd1) mic connected\n"); + type = SND_JACK_HEADSET; + + /* Unground MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2, + 1 << 2); + /* Unground HPL/R */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0x3, 0); + /* Attach 2kOhm Resistor from MICBIAS to MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKR2); + /* Attach SARADC to MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK, + NAU8825_SAR_INPUT_JKR2); + + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_force_enable_pin(dapm, "SAR"); + snd_soc_dapm_sync(dapm); + break; + case 2: + case 3: + dev_info(nau8825->dev, "CTIA (micgnd2) mic connected\n"); + type = SND_JACK_HEADSET; + + /* Unground MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2, + 2 << 2); + /* Unground HPL/R */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0x3, 0); + /* Attach 2kOhm Resistor from MICBIAS to MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKSLV); + /* Attach SARADC to MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK, + NAU8825_SAR_INPUT_JKSLV); + + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_force_enable_pin(dapm, "SAR"); + snd_soc_dapm_sync(dapm); + break; + } + + return type; +} + +#define NAU8825_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \ + SND_JACK_BTN_2 | SND_JACK_BTN_3) + +static irqreturn_t nau8825_interrupt(int irq, void *data) +{ + struct nau8825 *nau8825 = (struct nau8825 *)data; + struct regmap *regmap = nau8825->regmap; + int active_irq, clear_irq = 0, event = 0, event_mask = 0; + + regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq); + + if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) == + NAU8825_JACK_EJECTION_DETECTED) { + + nau8825_eject_jack(nau8825); + event_mask |= SND_JACK_HEADSET; + clear_irq = NAU8825_JACK_EJECTION_IRQ_MASK; + } else if (active_irq & NAU8825_KEY_SHORT_PRESS_IRQ) { + int key_status; + + regmap_read(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, + &key_status); + + /* upper 8 bits of the register are for short pressed keys, + lower 8 bits - for long pressed buttons */ + nau8825->button_pressed = nau8825_button_decode( + key_status >> 8); + + event |= nau8825->button_pressed; + event_mask |= NAU8825_BUTTONS; + clear_irq = NAU8825_KEY_SHORT_PRESS_IRQ; + } else if (active_irq & NAU8825_KEY_RELEASE_IRQ) { + event_mask = NAU8825_BUTTONS; + clear_irq = NAU8825_KEY_RELEASE_IRQ; + } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { + if (nau8825_is_jack_inserted(regmap)) { + event |= nau8825_jack_insert(nau8825); + } else { + dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n"); + nau8825_eject_jack(nau8825); + } + + event_mask |= SND_JACK_HEADSET; + clear_irq = NAU8825_HEADSET_COMPLETION_IRQ; + } + + if (!clear_irq) + clear_irq = active_irq; + /* clears the rightmost interruption */ + regmap_write(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq); + + if (event_mask) + snd_soc_jack_report(nau8825->jack, event, event_mask); + + return IRQ_HANDLED; +} + +static void nau8825_setup_buttons(struct regmap *regmap) +{ + /* Setup Button Detect (Debounce, number of buttons, and Hysteresis) */ + regmap_write(regmap, NAU8825_REG_KEYDET_CTRL, 0x7311); + + /* Setup 4 buttons impedane according to Android specification + * https://source.android.com/accessories/headset-spec.html + * Button 0 - 0-70 Ohm + * Button 1 - 110-180 Ohm + * Button 2 - 210-290 Ohm + * Button 3 - 360-680 Ohm + */ + regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_1, 0x0f1f); + regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_2, 0x325f); +} + +static void nau8825_init_regs(struct regmap *regmap) +{ + /* Power down DACs for power savings */ + regmap_write(regmap, NAU8825_REG_CHARGE_PUMP, 0x0300); + /* DAC Zero Crossing Enable */ + regmap_write(regmap, NAU8825_REG_MUTE_CTRL, 0x1000); + /* VMID Enable and Tieoff */ + regmap_write(regmap, NAU8825_REG_BIAS_ADJ, 0x0060); + /* Analog Bias Enable, Disable Boost Driver, + Automatic Short circuit protection enable */ + regmap_write(regmap, NAU8825_REG_BOOST, 0x3140); + /* Ground HP Outputs[1:0], + Enable Automatic Mic/Gnd switching reading on insert interrupt[6] */ + regmap_write(regmap, NAU8825_REG_HSD_CTRL, 0x004f); + + regmap_write(regmap, NAU8825_REG_JACK_DET_CTRL, 0x01e0); + /* IRQ Output Enable, Mask Insert Interrupt */ + regmap_write(regmap, NAU8825_REG_INTERRUPT_MASK, 0x0801); + /* Jack Detect pull up (High=eject, Low=insert) */ + regmap_write(regmap, NAU8825_REG_GPIO12_CTRL, 0x0800); + /* Setup SAR ADC */ + regmap_write(regmap, NAU8825_REG_SAR_CTRL, 0x0280); + nau8825_setup_buttons(regmap); + + /* Setup ADC x128 OSR */ + regmap_write(regmap, NAU8825_REG_ADC_RATE, 0x0002); + /* Setup DAC x128 OSR */ + regmap_write(regmap, NAU8825_REG_DAC_CTRL1, 0x0082); + /* DAC bias settings */ + regmap_write(regmap, NAU8825_REG_ANALOG_CONTROL_2, 0x1003); + /* ADC Bias Settings */ + regmap_write(regmap, NAU8825_REG_ANALOG_ADC_2, 0x0260); + /* Maximize Jack Insert Debounce */ + regmap_write(regmap, NAU8825_REG_JACK_DET_CTRL, 0x00e0); + + /* Setup clocks */ + regmap_write(regmap, NAU8825_REG_ENA_CTRL, 0x0416); + + /* Chip needs one FSCLK cycle in order to generate interrupts, + as we cannot guarantee one will be provided by the system. Turning + master mode on then off enables us to generate that FSCLK cycle + with a minimum of contention on the clock bus. + Enables master mode and correctly divides BCLK and FSCLK from MCLK. + */ + regmap_write(regmap, NAU8825_REG_I2S_PCM_CTRL2, 0x2019); + regmap_write(regmap, NAU8825_REG_I2S_PCM_CTRL2, 0x0010); + + /* Mask jack insert interruption */ + regmap_write(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0x0011); +} + +static const struct regmap_config nau8825_regmap_config = { + .val_bits = 16, + .reg_bits = 16, + + .max_register = NAU8825_REG_MAX, + .readable_reg = nau8825_readable_reg, + .writeable_reg = nau8825_writeable_reg, + .volatile_reg = nau8825_volatile_reg, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = nau8825_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(nau8825_reg_defaults), +}; + +static int nau8825_codec_probe(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + struct device *dev = codec->dev; + + nau8825->dapm = &codec->dapm; + + nau8825_init_regs(nau8825->regmap); + /* The interrupt clock is gated by x1[10:8], + * one of them needs to be enabled all the time for + * interrupts to happen. */ + snd_soc_dapm_force_enable_pin(&codec->dapm, "DDACR"); + snd_soc_dapm_sync(&codec->dapm); + + if (nau8825->irq) { + int ret = devm_request_threaded_irq(dev, nau8825->irq, NULL, + nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "nau8825", nau8825); + + if (ret) { + dev_err(dev, "Cannot request irq %d (%d)\n", + nau8825->irq, ret); + return ret; + } + } + nau8825_restart_jack_detection(nau8825->regmap); + + return 0; +} + +static struct snd_soc_codec_driver nau8825_codec_driver = { + .probe = nau8825_codec_probe, + + .controls = nau8825_snd_controls, + .num_controls = ARRAY_SIZE(nau8825_snd_controls), + .dapm_widgets = nau8825_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets), + .dapm_routes = nau8825_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes), +}; + +static void nau8825_reset_chip(struct regmap *regmap) +{ + regmap_write(regmap, NAU8825_REG_RESET, 0x00); + regmap_write(regmap, NAU8825_REG_RESET, 0x00); +} + +static int nau8825_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct nau8825 *nau8825; + int ret, value; + + nau8825 = devm_kzalloc(dev, sizeof(*nau8825), GFP_KERNEL); + if (!nau8825) + return -ENOMEM; + + i2c_set_clientdata(i2c, nau8825); + + nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap_config); + if (IS_ERR(nau8825->regmap)) + return PTR_ERR(nau8825->regmap); + nau8825->irq = i2c->irq; + nau8825->dev = dev; + + nau8825_reset_chip(nau8825->regmap); + ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value); + if (ret < 0) { + dev_err(dev, "Failed to read device id from the NAU8825: %d\n", + ret); + return ret; + } + if ((value & NAU8825_SOFTWARE_ID_MASK) != + NAU8825_SOFTWARE_ID_NAU8825) { + dev_err(dev, "Not a NAU8825 chip\n"); + return -ENODEV; + } + + return snd_soc_register_codec(&i2c->dev, &nau8825_codec_driver, + &nau8825_dai, 1); +} + +static int nau8825_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id nau8825_i2c_ids[] = { + { "nau8825", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, nau8825_i2c_ids); + +static struct i2c_driver nau8825_driver = { + .driver = { + .name = "nau8825", + .owner = THIS_MODULE, + }, + .probe = nau8825_i2c_probe, + .remove = nau8825_i2c_remove, + .id_table = nau8825_i2c_ids, +}; +module_i2c_driver(nau8825_driver); + +MODULE_DESCRIPTION("ASoC nau8825 driver"); +MODULE_AUTHOR("Anatol Pomozov <anatol(a)chromium.org>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h new file mode 100644 index 0000000..e1eb769 --- /dev/null +++ b/sound/soc/codecs/nau8825.h @@ -0,0 +1,258 @@ +/* + * NAU8825 ALSA SoC audio driver + * + * Copyright 2015 Google Inc. + * Author: Anatol Pomozov <anatol.pomozov(a)chrominium.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __NAU8825_H__ +#define __NAU8825_H__ + +#define NAU8825_REG_RESET 0x00 +#define NAU8825_REG_ENA_CTRL 0x01 +#define NAU8825_REG_CLK_DIVIDER 0x03 +#define NAU8825_REG_FLL1 0x04 +#define NAU8825_REG_FLL2 0x05 +#define NAU8825_REG_FLL3 0x06 +#define NAU8825_REG_FLL4 0x07 +#define NAU8825_REG_FLL5 0x08 +#define NAU8825_REG_FLL6 0x09 +#define NAU8825_REG_FLL_VCO_RSV 0x0a +#define NAU8825_REG_HSD_CTRL 0x0c +#define NAU8825_REG_JACK_DET_CTRL 0x0d +#define NAU8825_REG_INTERRUPT_MASK 0x0f +#define NAU8825_REG_IRQ_STATUS 0x10 +#define NAU8825_REG_INT_CLR_KEY_STATUS 0x11 +#define NAU8825_REG_INTERRUPT_DIS_CTRL 0x12 +#define NAU8825_REG_SAR_CTRL 0x13 +#define NAU8825_REG_KEYDET_CTRL 0x14 +#define NAU8825_REG_VDET_THRESHOLD_1 0x15 +#define NAU8825_REG_VDET_THRESHOLD_2 0x16 +#define NAU8825_REG_VDET_THRESHOLD_3 0x17 +#define NAU8825_REG_VDET_THRESHOLD_4 0x18 +#define NAU8825_REG_GPIO34_CTRL 0x19 +#define NAU8825_REG_GPIO12_CTRL 0x1a +#define NAU8825_REG_TDM_CTRL 0x1b +#define NAU8825_REG_I2S_PCM_CTRL1 0x1c +#define NAU8825_REG_I2S_PCM_CTRL2 0x1d +#define NAU8825_REG_LEFT_TIME_SLOT 0x1e +#define NAU8825_REG_RIGHT_TIME_SLOT 0x1f +#define NAU8825_REG_BIQ_CTRL 0x20 +#define NAU8825_REG_BIQ_COF1 0x21 +#define NAU8825_REG_BIQ_COF2 0x22 +#define NAU8825_REG_BIQ_COF3 0x23 +#define NAU8825_REG_BIQ_COF4 0x24 +#define NAU8825_REG_BIQ_COF5 0x25 +#define NAU8825_REG_BIQ_COF6 0x26 +#define NAU8825_REG_BIQ_COF7 0x27 +#define NAU8825_REG_BIQ_COF8 0x28 +#define NAU8825_REG_BIQ_COF9 0x29 +#define NAU8825_REG_BIQ_COF10 0x2a +#define NAU8825_REG_ADC_RATE 0x2b +#define NAU8825_REG_DAC_CTRL1 0x2c +#define NAU8825_REG_DAC_CTRL2 0x2d +#define NAU8825_REG_DAC_DGAIN_CTRL 0x2f +#define NAU8825_REG_ADC_DGAIN_CTRL 0x30 +#define NAU8825_REG_MUTE_CTRL 0x31 +#define NAU8825_REG_HSVOL_CTRL 0x32 +#define NAU8825_REG_DACL_CTRL 0x33 +#define NAU8825_REG_DACR_CTRL 0x34 +#define NAU8825_REG_ADC_DRC_KNEE_IP12 0x38 +#define NAU8825_REG_ADC_DRC_KNEE_IP34 0x39 +#define NAU8825_REG_ADC_DRC_SLOPES 0x3a +#define NAU8825_REG_ADC_DRC_ATKDCY 0x3b +#define NAU8825_REG_DAC_DRC_KNEE_IP12 0x45 +#define NAU8825_REG_DAC_DRC_KNEE_IP34 0x46 +#define NAU8825_REG_DAC_DRC_SLOPES 0x47 +#define NAU8825_REG_DAC_DRC_ATKDCY 0x48 +#define NAU8825_REG_IMM_MODE_CTRL 0x4c +#define NAU8825_REG_IMM_RMS_L 0x4d +#define NAU8825_REG_IMM_RMS_R 0x4e +#define NAU8825_REG_CLASSG_CTRL 0x50 +#define NAU8825_REG_OPT_EFUSE_CTRL 0x51 +#define NAU8825_REG_MISC_CTRL 0x55 +#define NAU8825_REG_I2C_DEVICE_ID 0x58 +#define NAU8825_REG_SARDOUT_RAM_STATUS 0x59 +#define NAU8825_REG_BIAS_ADJ 0x66 +#define NAU8825_REG_TRIM_SETTINGS 0x68 +#define NAU8825_REG_ANALOG_CONTROL_1 0x69 +#define NAU8825_REG_ANALOG_CONTROL_2 0x6a +#define NAU8825_REG_ANALOG_ADC_1 0x71 +#define NAU8825_REG_ANALOG_ADC_2 0x72 +#define NAU8825_REG_RDAC 0x73 +#define NAU8825_REG_MIC_BIAS 0x74 +#define NAU8825_REG_BOOST 0x76 +#define NAU8825_REG_FEPGA 0x77 +#define NAU8825_REG_POWER_UP_CONTROL 0x7f +#define NAU8825_REG_CHARGE_PUMP 0x80 +#define NAU8825_REG_CHARGE_PUMP_INPUT_READ 0x81 +#define NAU8825_REG_GENERAL_STATUS 0x82 +#define NAU8825_REG_MAX NAU8825_REG_GENERAL_STATUS + +/* ENA_CTRL (0x1) */ +#define NAU8825_ENABLE_DACR_SFT 10 +#define NAU8825_ENABLE_DACL_SFT 9 +#define NAU8825_ENABLE_ADC_SFT 8 +#define NAU8825_ENABLE_SAR_SFT 1 + +/* CLK_DIVIDER (0x3) */ +#define NAU8825_CLK_SRC_SFT 15 +#define NAU8825_CLK_SRC_MASK (1 << NAU8825_CLK_SRC_SFT) +#define NAU8825_CLK_SRC_VCO (1 << NAU8825_CLK_SRC_SFT) +#define NAU8825_CLK_SRC_MCLK (0 << NAU8825_CLK_SRC_SFT) + +/* HSD_CTRL (0xc) */ +#define NAU8825_HSD_AUTO_MODE (1 << 6) +#define NAU8825_SPKR_DWN1R_SHORT (1 << 1) +#define NAU8825_SPKR_DWN1L_SHORT (1 << 0) + +/* JACK_DET_CTRL (0xd) */ +#define NAU8825_JACK_DET_RESTART (1 << 9) + +/* IRQ_STATUS (0x10) */ +#define NAU8825_HEADSET_COMPLETION_IRQ (1 << 10) +#define NAU8825_SHORT_CIRCUIT_IRQ (1 << 9) +#define NAU8825_IMPEDANCE_MEAS_IRQ (1 << 8) +#define NAU8825_KEY_IRQ_MASK (0x7 << 5) +#define NAU8825_KEY_RELEASE_IRQ (1 << 7) +#define NAU8825_KEY_LONG_PRESS_IRQ (1 << 6) +#define NAU8825_KEY_SHORT_PRESS_IRQ (1 << 5) +#define NAU8825_MIC_DETECTION_IRQ (1 << 4) +#define NAU8825_JACK_EJECTION_IRQ_MASK (3 << 2) +#define NAU8825_JACK_EJECTION_DETECTED (1 << 2) +#define NAU8825_JACK_INSERTION_IRQ_MASK (3 << 0) +#define NAU8825_JACK_INSERTION_DETECTED (1 << 0) + +/* SAR_CTRL (0x13) */ +#define NAU8825_SAR_ADC_EN_SFT 12 +#define NAU8825_SAR_ADC_EN (1 << NAU8825_SAR_ADC_EN_SFT) +#define NAU8825_SAR_INPUT_MASK (1 << 11) +#define NAU8825_SAR_INPUT_JKSLV (1 << 11) +#define NAU8825_SAR_INPUT_JKR2 (0 << 11) + +/* KEYDET_CTRL (0x14) */ +#define NAU8825_KEYDET_LEVELS_NR_SFT 8 +#define NAU8825_KEYDET_LEVELS_NR_MASK (0x7 << 8) + +/* I2S_PCM_CTRL1 (0x1c) */ +#define NAU8825_I2S_BP_SFT 7 +#define NAU8825_I2S_BP_MASK (1 << NAU8825_I2S_BP_SFT) +#define NAU8825_I2S_BP_INV (1 << NAU8825_I2S_BP_SFT) +#define NAU8825_I2S_PCMB_SFT 6 +#define NAU8825_I2S_PCMB_MASK (1 << NAU8825_I2S_PCMB_SFT) +#define NAU8825_I2S_PCMB_EN (1 << NAU8825_I2S_PCMB_SFT) +#define NAU8825_I2S_DL_SFT 2 +#define NAU8825_I2S_DL_MASK (0x3 << NAU8825_I2S_DL_SFT) +#define NAU8825_I2S_DL_16 (0 << NAU8825_I2S_DL_SFT) +#define NAU8825_I2S_DL_20 (1 << NAU8825_I2S_DL_SFT) +#define NAU8825_I2S_DL_24 (2 << NAU8825_I2S_DL_SFT) +#define NAU8825_I2S_DL_32 (3 << NAU8825_I2S_DL_SFT) +#define NAU8825_I2S_DF_SFT 0 +#define NAU8825_I2S_DF_MASK (0x3 << NAU8825_I2S_DF_SFT) +#define NAU8825_I2S_DF_RIGTH (0 << NAU8825_I2S_DF_SFT) +#define NAU8825_I2S_DF_LEFT (1 << NAU8825_I2S_DF_SFT) +#define NAU8825_I2S_DF_I2S (2 << NAU8825_I2S_DF_SFT) +#define NAU8825_I2S_DF_PCM_AB (3 << NAU8825_I2S_DF_SFT) + +/* I2S_PCM_CTRL2 (0x1d) */ +#define NAU8825_I2S_MS_SFT 3 +#define NAU8825_I2S_MS_MASK (1 << NAU8825_I2S_MS_SFT) +#define NAU8825_I2S_MS_MASTER (1 << NAU8825_I2S_MS_SFT) +#define NAU8825_I2S_MS_SLAVE (0 << NAU8825_I2S_MS_SFT) + +/* ADC_RATE (0x2b) */ +#define NAU8825_ADC_SINC4 (1 << 4) +#define NAU8825_ADC_SINC_DOWN_MASK 3 +#define NAU8825_ADC_SINC_DOWN_32 0 +#define NAU8825_ADC_SINC_DOWN_64 1 +#define NAU8825_ADC_SINC_DOWN_128 2 +#define NAU8825_ADC_SINC_DOWN_256 3 + +/* DAC_CTRL1 (0x2c) */ +#define NAU8825_DAC_CLIP_OFF (1 << 7) +#define NAU8825_DAC_OVERSAMPLE_MASK 7 +#define NAU8825_DAC_OVERSAMPLE_64 0 +#define NAU8825_DAC_OVERSAMPLE_256 1 +#define NAU8825_DAC_OVERSAMPLE_128 2 +#define NAU8825_DAC_OVERSAMPLE_32 4 + +/* MUTE_CTRL (0x31) */ +#define NAU8825_DAC_ZERO_CROSSING_EN (1 << 9) +#define NAU8825_DAC_SOFT_MUTE (1 << 9) + +/* HSVOL_CTRL (0x32) */ +#define NAU8825_HP_MUTE (1 << 15) + +/* DACL_CTRL (0x33) */ +#define NAU8825_DACL_CH_SEL_SFT 9 + +/* DACR_CTRL (0x34) */ +#define NAU8825_DACR_CH_SEL_SFT 9 + +/* I2C_DEVICE_ID (0x58) */ +#define NAU8825_GPIO2JD1 (1 << 7) +#define NAU8825_SOFTWARE_ID_MASK 0x3 +#define NAU8825_SOFTWARE_ID_NAU8825 0x0 + +/* BIAS_ADJ (0x66) */ +#define NAU8825_BIAS_VMID (1 << 6) +#define NAU8825_BIAS_VMID_SEL_MASK (3 << 4) +#define NAU8825_BIAS_VMID_SEL_OPEN (0 << 4) +#define NAU8825_BIAS_VMID_SEL_25KOHM (1 << 4) +#define NAU8825_BIAS_VMID_SEL_125KOHM (2 << 4) +#define NAU8825_BIAS_VMID_SEL_2_5KOHM (3 << 4) + +/* ANALOG_CONTROL_2 (0x6a) */ +#define NAU8825_HP_NON_CLASSG_CURRENT_2xADJ (1 << 12) +#define NAU8825_DAC_CAPACITOR_MSB (1 << 1) +#define NAU8825_DAC_CAPACITOR_LSB (1 << 0) + +/* ANALOG_ADC_2 (0x72) */ +#define NAU8825_ADC_VREFSEL_MASK (0x3 << 8) +#define NAU8825_ADC_VREFSEL_ANALOG (0 << 8) +#define NAU8825_ADC_VREFSEL_VMID (1 << 8) +#define NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB (2 << 8) +#define NAU8825_ADC_VREFSEL_VMID_PLUS_1DB (3 << 8) +#define NAU8825_POWERUP_ADCL (1 << 6) + +/* MIC_BIAS (0x74) */ +#define NAU8825_MICBIAS_JKSLV (1 << 14) +#define NAU8825_MICBIAS_JKR2 (1 << 12) +#define NAU8825_MICBIAS_POWERUP_SFT 8 + +/* BOOST (0x76) */ +#define NAU8825_PRECHARGE_DIS (1 << 13) +#define NAU8825_GLOBAL_BIAS_EN (1 << 12) +#define NAU8825_HP_BOOST_DIS (1 << 12) +#define NAU8825_SHORT_SHUTDOWN_EN (1 << 6) + +/* POWER_UP_CONTROL (0x7f) */ +#define NAU8825_POWERUP_HP_DRV_L (1 << 0) +#define NAU8825_POWERUP_HP_DRV_R (1 << 1) +#define NAU8825_POWERUP_DRV_IN_L (1 << 2) +#define NAU8825_POWERUP_DRV_IN_R (1 << 3) +#define NAU8825_POWERUP_INTEGR_L (1 << 4) +#define NAU8825_POWERUP_INTEGR_R (1 << 5) + +/* CHARGE_PUMP_AND_POWER_DOWN_CONTROL (0x80) */ +#define NAU8825_JAMNODCLOW (1 << 10) +#define NAU8825_POWER_DOWN_DACR (1 << 9) +#define NAU8825_POWER_DOWN_DACL (1 << 8) +#define NAU8825_CHANRGE_PUMP_EN (1 << 5) + + +/* System Clock Source */ +enum { + NAU8825_CLK_MCLK = 0, + NAU8825_CLK_INTERNAL, +}; + +int nau8825_enable_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack); + + +#endif /* __NAU8825_H__ */ -- 2.5.0.rc2.392.g76e840b

2 12

[alsa-devel] [PATCH] ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops
by Axel Lin 28 Aug '15

28 Aug '15

asoc_qcom_lpass_cpu_dai_ops is exported and used by multiple drivers, make it const to prevent modifying it at run time. Signed-off-by: Axel Lin <axel.lin(a)ingics.com> --- sound/soc/qcom/lpass-cpu.c | 2 +- sound/soc/qcom/lpass.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 23f3d59..97bc202 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -235,7 +235,7 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream, return ret; } -struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = { +const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = { .set_sysclk = lpass_cpu_daiops_set_sysclk, .startup = lpass_cpu_daiops_startup, .shutdown = lpass_cpu_daiops_shutdown, diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h index d6e86c1..0b63e2e 100644 --- a/sound/soc/qcom/lpass.h +++ b/sound/soc/qcom/lpass.h @@ -93,6 +93,6 @@ int asoc_qcom_lpass_platform_register(struct platform_device *); int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev); int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev); int asoc_qcom_lpass_cpu_dai_probe(struct snd_soc_dai *dai); -extern struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops; +extern const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops; #endif /* __LPASS_H__ */ -- 2.1.0

2 1