August 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
by Christian Hartmann 28 Aug '15

28 Aug '15

Hi Mika, Dan et al. @Dan : thank you, I will use get_maintainer.pl as of now. @Mika: you mean I should prepare a new DSDT table and in this case overwrite the SPI value there with the 0 and load it (the DSDT table ) into a custom kernel build ?? I will do this (cause all what I want is to enable the codec and to hear sound) currently I have in the extracted DSDT table from this device the SPI1 controller for the "AUDI" device as seen in this snippet : Scope (_SB) { Device (LPEA) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "80860F28" /* Intel SST Audio DSP */) // _HID: Hardware ID Name (_CID, "80860F28" /* Intel SST Audio DSP */) // _CID: Compatible ID Name (_DDN, "Intel(R) Low Power Audio Controller - 80860F28") // _DDN: DOS Device Name Name (_SUB, "17AA7004") // _SUB: Subsystem ID Name (_UID, One) // _UID: Unique ID Name (_DEP, Package (0x01) // _DEP: Dependencies { ^SPI1.AUDI }) Name (_PR0, Package (0x01) // _PR0: Power Resources for D0 { PLPE }) .... some lines later follows the AUDI device with Device (AUDI) { Name (_HID, "WM510205") // _HID: Hardware ID Name (_CID, "WM510205") // _CID: Compatible ID Name (_DDN, "Wolfson Microelectronics Audio WM5102") // _DDN: DOS Device Name Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { SpiSerialBus (0x0001, PolarityLow, FourWireMode, 0x08, ControllerInitiated, 0x007A1200, ClockPolarityLow, ClockPhaseFirst, "\\_SB.SPI1", 0x00, ResourceConsumer, , ) GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, , ) { // Pin list 0x0004 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.I2C7.PMIC", 0x00, ResourceConsumer, , ) { // Pin list 0x0003 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO1", 0x00, ResourceConsumer, , ) { // Pin list 0x0017 } }) Return (SBUF) /* \_SB_.SPI1.AUDI._CRS.SBUF */ } .... I t makes sense to me, to change the current value(s) in the DSDT and I have read about it to use a custom DSDT table but I am not 100% sure yet (until I have tested it). If I understand you correct, than all I have to do is to change the 'SPI1' string in this dsdt to SPI0 like ^SPI1.AUDI to ^SPI0.AUDI and this block here SpiSerialBus (0x0001, PolarityLow, FourWireMode, 0x08, ControllerInitiated, 0x007A1200, ClockPolarityLow, ClockPhaseFirst, "\\_SB.SPI1", 0x00, ResourceConsumer, , becomes SpiSerialBus (0x0000, PolarityLow, FourWireMode, 0x08, ControllerInitiated, 0x007A1200, ClockPolarityLow, ClockPhaseFirst, "\\_SB.SPI0", 0x00, ResourceConsumer, , For this case, could you please have a look in the whole DSDT table that I extract from this device? If nothing else seems relevant and the current system dsdt has to be changed as suggested, I will try this out as soon as possible @Jarkko : as you suggested , I attach the current system DSDT as a binary. I have also disassembled, and if someone needs it, I can also paste it somewhere else as a reference After all I will assembly the new dsdt and include it in my custom kernel builld as documented, but will wait for some new infos etc. thank you for you answers @all cheers chris 2015-06-25 9:36 GMT+02:00 Mika Westerberg <mika.westerberg(a)linux.intel.com>: > On Thu, Jun 25, 2015 at 09:29:31AM +0200, Christian Hartmann wrote: >> Hello Maintainer(s)s of SPI, >> >> hope I got all of you maintainers now. This email was already sent out >> last week to the alsa-devel list and I resent it here to you. >> >> I have one patch that enables the spi initialization of the WM510205 audio codec >> Without the patch, this message indicates that the codec chip fails >> with the current chipselect number in spi-pxa2xx: >> >> >> [ 0.296256] pxa2xx-spi 80860F0E:00: cs1 >= max 1 >> [ 0.296270] spi_master spi32766: failed to add SPI device >> WM510205:00 from ACPI >> >> So raise num_chipselect by one to enable the codec. The WM510202 is on >> chipselect = 1. > > The hardware only has one chipselect. > > You can fix this by specifying the correct chipselect in the ACPI > SpiSerialBus connector: > > SpiSerialBus (0, PolarityLow, FourWireMode, 8, ControllerInitiated, .. > > First parameter is the chipselect.

6 66

[alsa-devel] [PATCH] ALSA: usb-audio: correct the value cache check.
by Yao-Wen Mao 28 Aug '15

28 Aug '15

The check of cval->cached should be zero-based (including master channel). Signed-off-by: Yao-Wen Mao <yaowen(a)google.com> --- sound/usb/mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index fd5c49e..f494dce 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2540,7 +2540,7 @@ static int restore_mixer_value(struct usb_mixer_elem_list *list) for (c = 0; c < MAX_CHANNELS; c++) { if (!(cval->cmask & (1 << c))) continue; - if (cval->cached & (1 << c)) { + if (cval->cached & (1 << (c + 1))) { err = snd_usb_set_cur_mix_value(cval, c + 1, idx, cval->cache_val[idx]); if (err < 0) -- 2.5.0.457.gab17608

2 1

[alsa-devel] [PATCH v2] ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning
by Oder Chiou 28 Aug '15

28 Aug '15

Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- sound/soc/codecs/rt5645.c | 35 ++++++++++++++++++++++++----------- sound/soc/codecs/rt5645.h | 1 + 2 files changed, 25 insertions(+), 11 deletions(-) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 50f797c..4972bf3 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2806,13 +2806,13 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert) } regmap_write(rt5645->regmap, RT5645_JD_CTRL3, 0x00f0); - regmap_update_bits(rt5645->regmap, - RT5645_IN1_CTRL2, 0x1000, 0x1000); - regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, 0x0004, - 0x0004); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, + RT5645_CBJ_MN_JD, RT5645_CBJ_MN_JD); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, + RT5645_CBJ_BST1_EN, RT5645_CBJ_BST1_EN); msleep(100); - regmap_update_bits(rt5645->regmap, - RT5645_IN1_CTRL2, 0x1000, 0x0000); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, + RT5645_CBJ_MN_JD, 0); msleep(600); regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val); @@ -2836,10 +2836,10 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert) } else { /* jack out */ rt5645->jack_type = 0; - regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, 0x1000, - 0x1000); - regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, 0x0004, - 0x0000); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, + RT5645_CBJ_MN_JD, RT5645_CBJ_MN_JD); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, + RT5645_CBJ_BST1_EN, 0); if (rt5645->en_button_func) rt5645_enable_push_button_irq(codec, false); @@ -3458,13 +3458,26 @@ static int rt5645_i2c_remove(struct i2c_client *i2c) return 0; } +static void rt5645_i2c_shutdown(struct i2c_client *i2c) +{ + struct rt5645_priv *rt5645 = i2c_get_clientdata(i2c); + + regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3, + RT5645_RING2_SLEEVE_GND, RT5645_RING2_SLEEVE_GND); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, RT5645_CBJ_MN_JD, + RT5645_CBJ_MN_JD); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, RT5645_CBJ_BST1_EN, + 0); +} + static struct i2c_driver rt5645_i2c_driver = { .driver = { .name = "rt5645", .acpi_match_table = ACPI_PTR(rt5645_acpi_match), }, .probe = rt5645_i2c_probe, - .remove = rt5645_i2c_remove, + .remove = rt5645_i2c_remove, + .shutdown = rt5645_i2c_shutdown, .id_table = rt5645_i2c_id, }; module_i2c_driver(rt5645_i2c_driver); diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h index dffdda2..0e4cfc6 100644 --- a/sound/soc/codecs/rt5645.h +++ b/sound/soc/codecs/rt5645.h @@ -2115,6 +2115,7 @@ enum { #define RT5645_JD_PSV_MODE (0x1 << 12) #define RT5645_IRQ_CLK_GATE_CTRL (0x1 << 11) #define RT5645_MICINDET_MANU (0x1 << 7) +#define RT5645_RING2_SLEEVE_GND (0x1 << 5) /* Vendor ID (0xfd) */ #define RT5645_VER_C 0x2 -- 1.8.1.1.439.g50a6b54

2 2

[alsa-devel] Applied "ASoC: bcm2835-i2s: Fix module autoload for OF platform drivers" to the asoc tree
by Mark Brown 27 Aug '15

27 Aug '15

The patch ASoC: bcm2835-i2s: Fix module autoload for OF platform drivers has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 054bc835d27b558393541c32a209c01d89cda75a Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt <luis(a)debethencourt.com> Date: Thu, 27 Aug 2015 17:04:01 +0200 Subject: [PATCH] ASoC: bcm2835-i2s: Fix module autoload for OF platform drivers These platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis(a)debethencourt.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/bcm/bcm2835-i2s.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c index 03fa1cbf8ec1..8c435beb263d 100644 --- a/sound/soc/bcm/bcm2835-i2s.c +++ b/sound/soc/bcm/bcm2835-i2s.c @@ -862,6 +862,8 @@ static const struct of_device_id bcm2835_i2s_of_match[] = { {}, }; +MODULE_DEVICE_TABLE(of, bcm2835_i2s_of_match); + static struct platform_driver bcm2835_i2s_driver = { .probe = bcm2835_i2s_probe, .driver = { -- 2.5.0

1 0

[alsa-devel] [PATCH v5] ASoC: ics43432: Add codec driver for InvenSense ICS-43432
by Ricard Wanderlof 27 Aug '15

27 Aug '15

Add support for the InvenSense ICS-43432 I2S MEMS microphone. This is a non-software-configurable MEMS microphone with I2S output. Tested on a setup with a single ICS-43432 (the device itself supports stereo operation using a hardware pin controlling left vs. right channel output). Signed-off-by: Ricard Wanderlof <ricardw(a)axis.com> --- V5: Not a lot left on the code now... Removed set_dai_fmt as it only checked the formats and never did any useful work. V4: Updated commit message that the driver has been tested with real hardware, after off-list comment on V3. V3: Fixed MODULE_LICENSE string. V2: Update after comments from Lars-Peter: set rate to CONTINUOUS and let ALSA figure out the details, also removing hw_params as it is then not needed. I've left the checks in dai_set_fmt, as (IIUC) there currently doesn't seem to be a way for the ALSA framework to handle format constraints using the codec configuration struct. .../devicetree/bindings/sound/ics43432.txt | 17 +++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ics43432.c | 77 ++++++++++++++++++++ 5 files changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt create mode 100644 sound/soc/codecs/ics43432.c diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 0000000..b02e3a6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 8033919..7966637 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -103,6 +103,7 @@ img Imagination Technologies Ltd. innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group +invensense InvenSense Inc. isee ISEE 2007 S.L. isil Intersil karo Ka-Ro electronics GmbH diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 061c465..d696c85 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -62,6 +62,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_BT_SCO select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C + select SND_SOC_ICS43432 select SND_SOC_ISABELLE if I2C select SND_SOC_JZ4740_CODEC select SND_SOC_LM4857 if I2C @@ -444,6 +445,9 @@ config SND_SOC_ES8328_SPI tristate select SND_SOC_ES8328 +config SND_SOC_ICS43432 + tristate + config SND_SOC_ISABELLE tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index abe2d7e..23a2caf 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -55,6 +55,7 @@ snd-soc-dmic-objs := dmic.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o snd-soc-es8328-spi-objs := es8328-spi.o +snd-soc-ics43432-objs := ics43432.o snd-soc-isabelle-objs := isabelle.o snd-soc-jz4740-codec-objs := jz4740.o snd-soc-l3-objs := l3.o @@ -240,6 +241,7 @@ obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o +obj-$(CONFIG_SND_SOC_ICS43432) += snd-soc-ics43432.o obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o diff --git a/sound/soc/codecs/ics43432.c b/sound/soc/codecs/ics43432.c new file mode 100644 index 0000000..4f202c1 --- /dev/null +++ b/sound/soc/codecs/ics43432.c @@ -0,0 +1,77 @@ +/* + * I2S MEMS microphone driver for InvenSense ICS-43432 + * + * - Non configurable. + * - I2S interface, 64 BCLs per frame, 32 bits per channel, 24 bit data + * + * Copyright (c) 2015 Axis Communications AB + * + * Licensed under GPL2. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#define ICS43432_RATE_MIN 7190 /* Hz, from data sheet */ +#define ICS43432_RATE_MAX 52800 /* Hz, from data sheet */ + +#define ICS43432_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32) + +static struct snd_soc_dai_driver ics43432_dai = { + .name = "ics43432-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rate_min = ICS43432_RATE_MIN, + .rate_max = ICS43432_RATE_MAX, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = ICS43432_FORMATS, + }, +}; + +static struct snd_soc_codec_driver ics43432_codec_driver = { +}; + +static int ics43432_probe(struct platform_device *pdev) +{ + return snd_soc_register_codec(&pdev->dev, &ics43432_codec_driver, + &ics43432_dai, 1); +} + +static int ics43432_remove(struct platform_device *pdev) +{ + snd_soc_unregister_codec(&pdev->dev); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id ics43432_ids[] = { + { .compatible = "invensense,ics43432", }, + { } +}; +MODULE_DEVICE_TABLE(of, ics43432_dt_ids); +#endif + +static struct platform_driver ics43432_driver = { + .driver = { + .name = "ics43432", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ics43432_ids), + }, + .probe = ics43432_probe, + .remove = ics43432_remove, +}; + +module_platform_driver(ics43432_driver); + +MODULE_DESCRIPTION("ASoC ICS43432 driver"); +MODULE_AUTHOR("Ricard Wanderlof <ricardw(a)axis.com>"); +MODULE_LICENSE("GPLv2"); -- 1.7.10.4 -- Ricard Wolf Wanderlöf ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30

2 1

[alsa-devel] Applied "ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning" to the asoc tree
by Mark Brown 27 Aug '15

27 Aug '15

The patch ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From f2988afedf2c19880a3c65d79dfc7939e1b53d8a Mon Sep 17 00:00:00 2001 From: Oder Chiou <oder_chiou(a)realtek.com> Date: Thu, 27 Aug 2015 15:14:51 +0800 Subject: [PATCH] ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/codecs/rt5645.c | 35 ++++++++++++++++++++++++----------- sound/soc/codecs/rt5645.h | 1 + 2 files changed, 25 insertions(+), 11 deletions(-) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 0a4cb6bc3433..db50b035b00b 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2806,13 +2806,13 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert) } regmap_write(rt5645->regmap, RT5645_JD_CTRL3, 0x00f0); - regmap_update_bits(rt5645->regmap, - RT5645_IN1_CTRL2, 0x1000, 0x1000); - regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, 0x0004, - 0x0004); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, + RT5645_CBJ_MN_JD, RT5645_CBJ_MN_JD); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, + RT5645_CBJ_BST1_EN, RT5645_CBJ_BST1_EN); msleep(100); - regmap_update_bits(rt5645->regmap, - RT5645_IN1_CTRL2, 0x1000, 0x0000); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, + RT5645_CBJ_MN_JD, 0); msleep(600); regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val); @@ -2836,10 +2836,10 @@ static int rt5645_jack_detect(struct snd_soc_codec *codec, int jack_insert) } else { /* jack out */ rt5645->jack_type = 0; - regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, 0x1000, - 0x1000); - regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, 0x0004, - 0x0000); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, + RT5645_CBJ_MN_JD, RT5645_CBJ_MN_JD); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, + RT5645_CBJ_BST1_EN, 0); if (rt5645->en_button_func) rt5645_enable_push_button_irq(codec, false); @@ -3449,6 +3449,18 @@ static int rt5645_i2c_remove(struct i2c_client *i2c) return 0; } +static void rt5645_i2c_shutdown(struct i2c_client *i2c) +{ + struct rt5645_priv *rt5645 = i2c_get_clientdata(i2c); + + regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3, + RT5645_RING2_SLEEVE_GND, RT5645_RING2_SLEEVE_GND); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, RT5645_CBJ_MN_JD, + RT5645_CBJ_MN_JD); + regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, RT5645_CBJ_BST1_EN, + 0); +} + static struct i2c_driver rt5645_i2c_driver = { .driver = { .name = "rt5645", @@ -3456,7 +3468,8 @@ static struct i2c_driver rt5645_i2c_driver = { .acpi_match_table = ACPI_PTR(rt5645_acpi_match), }, .probe = rt5645_i2c_probe, - .remove = rt5645_i2c_remove, + .remove = rt5645_i2c_remove, + .shutdown = rt5645_i2c_shutdown, .id_table = rt5645_i2c_id, }; module_i2c_driver(rt5645_i2c_driver); diff --git a/sound/soc/codecs/rt5645.h b/sound/soc/codecs/rt5645.h index 199b22fe1bf3..1987eb825e41 100644 --- a/sound/soc/codecs/rt5645.h +++ b/sound/soc/codecs/rt5645.h @@ -2111,6 +2111,7 @@ enum { #define RT5645_JD_PSV_MODE (0x1 << 12) #define RT5645_IRQ_CLK_GATE_CTRL (0x1 << 11) #define RT5645_MICINDET_MANU (0x1 << 7) +#define RT5645_RING2_SLEEVE_GND (0x1 << 5) /* Vendor ID (0xfd) */ #define RT5645_VER_C 0x2 -- 2.5.0

1 0

[alsa-devel] [PATCH 1/2] mfd: arizona: Add register bits to support the ANC block
by Charles Keepax 27 Aug '15

27 Aug '15

Some Arizona devices have a hardware ANC block present. This patch adds the registers necessary to configure this hardware block. Signed-off-by: Charles Keepax <ckeepax(a)opensource.wolfsonmicro.com> --- drivers/mfd/wm5110-tables.c | 185 +++++++++++++++++++++++++++++++++ include/linux/mfd/arizona/registers.h | 70 +++++++++++++ 2 files changed, 255 insertions(+), 0 deletions(-) diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index dae04dd..71b84cd 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -1637,6 +1637,184 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000EF8, 0x0000 }, /* R3832 - ISRC 3 CTRL 3 */ { 0x00000F00, 0x0000 }, /* R3840 - Clock Control */ { 0x00000F01, 0x0000 }, /* R3841 - ANC_SRC */ + { 0x00000F08, 0x001c }, /* R3848 - ANC Coefficient */ + { 0x00000F09, 0x0000 }, /* R3849 - ANC Coefficient */ + { 0x00000F0B, 0x0000 }, /* R3851 - ANC Coefficient */ + { 0x00000F0C, 0x0000 }, /* R3852 - ANC Coefficient */ + { 0x00000F0D, 0x0000 }, /* R3853 - ANC Coefficient */ + { 0x00000F0E, 0x0000 }, /* R3854 - ANC Coefficient */ + { 0x00000F0F, 0x0000 }, /* R3855 - ANC Coefficient */ + { 0x00000F10, 0x0000 }, /* R3856 - ANC Coefficient */ + { 0x00000F11, 0x0000 }, /* R3857 - ANC Coefficient */ + { 0x00000F12, 0x0000 }, /* R3858 - ANC Coefficient */ + { 0x00000F15, 0x0000 }, /* R3861 - FCL Filter Control */ + { 0x00000F17, 0x0004 }, /* R3863 - FCL ADC Reformatter Control */ + { 0x00000F18, 0x0004 }, /* R3864 - ANC Coefficient */ + { 0x00000F19, 0x0002 }, /* R3865 - ANC Coefficient */ + { 0x00000F1A, 0x0000 }, /* R3866 - ANC Coefficient */ + { 0x00000F1B, 0x0010 }, /* R3867 - ANC Coefficient */ + { 0x00000F1C, 0x0000 }, /* R3868 - ANC Coefficient */ + { 0x00000F1D, 0x0000 }, /* R3869 - ANC Coefficient */ + { 0x00000F1E, 0x0000 }, /* R3870 - ANC Coefficient */ + { 0x00000F1F, 0x0000 }, /* R3871 - ANC Coefficient */ + { 0x00000F20, 0x0000 }, /* R3872 - ANC Coefficient */ + { 0x00000F21, 0x0000 }, /* R3873 - ANC Coefficient */ + { 0x00000F22, 0x0000 }, /* R3874 - ANC Coefficient */ + { 0x00000F23, 0x0000 }, /* R3875 - ANC Coefficient */ + { 0x00000F24, 0x0000 }, /* R3876 - ANC Coefficient */ + { 0x00000F25, 0x0000 }, /* R3877 - ANC Coefficient */ + { 0x00000F26, 0x0000 }, /* R3878 - ANC Coefficient */ + { 0x00000F27, 0x0000 }, /* R3879 - ANC Coefficient */ + { 0x00000F28, 0x0000 }, /* R3880 - ANC Coefficient */ + { 0x00000F29, 0x0000 }, /* R3881 - ANC Coefficient */ + { 0x00000F2A, 0x0000 }, /* R3882 - ANC Coefficient */ + { 0x00000F2B, 0x0000 }, /* R3883 - ANC Coefficient */ + { 0x00000F2C, 0x0000 }, /* R3884 - ANC Coefficient */ + { 0x00000F2D, 0x0000 }, /* R3885 - ANC Coefficient */ + { 0x00000F2E, 0x0000 }, /* R3886 - ANC Coefficient */ + { 0x00000F2F, 0x0000 }, /* R3887 - ANC Coefficient */ + { 0x00000F30, 0x0000 }, /* R3888 - ANC Coefficient */ + { 0x00000F31, 0x0000 }, /* R3889 - ANC Coefficient */ + { 0x00000F32, 0x0000 }, /* R3890 - ANC Coefficient */ + { 0x00000F33, 0x0000 }, /* R3891 - ANC Coefficient */ + { 0x00000F34, 0x0000 }, /* R3892 - ANC Coefficient */ + { 0x00000F35, 0x0000 }, /* R3893 - ANC Coefficient */ + { 0x00000F36, 0x0000 }, /* R3894 - ANC Coefficient */ + { 0x00000F37, 0x0000 }, /* R3895 - ANC Coefficient */ + { 0x00000F38, 0x0000 }, /* R3896 - ANC Coefficient */ + { 0x00000F39, 0x0000 }, /* R3897 - ANC Coefficient */ + { 0x00000F3A, 0x0000 }, /* R3898 - ANC Coefficient */ + { 0x00000F3B, 0x0000 }, /* R3899 - ANC Coefficient */ + { 0x00000F3C, 0x0000 }, /* R3900 - ANC Coefficient */ + { 0x00000F3D, 0x0000 }, /* R3901 - ANC Coefficient */ + { 0x00000F3E, 0x0000 }, /* R3902 - ANC Coefficient */ + { 0x00000F3F, 0x0000 }, /* R3903 - ANC Coefficient */ + { 0x00000F40, 0x0000 }, /* R3904 - ANC Coefficient */ + { 0x00000F41, 0x0000 }, /* R3905 - ANC Coefficient */ + { 0x00000F42, 0x0000 }, /* R3906 - ANC Coefficient */ + { 0x00000F43, 0x0000 }, /* R3907 - ANC Coefficient */ + { 0x00000F44, 0x0000 }, /* R3908 - ANC Coefficient */ + { 0x00000F45, 0x0000 }, /* R3909 - ANC Coefficient */ + { 0x00000F46, 0x0000 }, /* R3910 - ANC Coefficient */ + { 0x00000F47, 0x0000 }, /* R3911 - ANC Coefficient */ + { 0x00000F48, 0x0000 }, /* R3912 - ANC Coefficient */ + { 0x00000F49, 0x0000 }, /* R3913 - ANC Coefficient */ + { 0x00000F4A, 0x0000 }, /* R3914 - ANC Coefficient */ + { 0x00000F4B, 0x0000 }, /* R3915 - ANC Coefficient */ + { 0x00000F4C, 0x0000 }, /* R3916 - ANC Coefficient */ + { 0x00000F4D, 0x0000 }, /* R3917 - ANC Coefficient */ + { 0x00000F4E, 0x0000 }, /* R3918 - ANC Coefficient */ + { 0x00000F4F, 0x0000 }, /* R3919 - ANC Coefficient */ + { 0x00000F50, 0x0000 }, /* R3920 - ANC Coefficient */ + { 0x00000F51, 0x0000 }, /* R3921 - ANC Coefficient */ + { 0x00000F52, 0x0000 }, /* R3922 - ANC Coefficient */ + { 0x00000F53, 0x0000 }, /* R3923 - ANC Coefficient */ + { 0x00000F54, 0x0000 }, /* R3924 - ANC Coefficient */ + { 0x00000F55, 0x0000 }, /* R3925 - ANC Coefficient */ + { 0x00000F56, 0x0000 }, /* R3926 - ANC Coefficient */ + { 0x00000F57, 0x0000 }, /* R3927 - ANC Coefficient */ + { 0x00000F58, 0x0000 }, /* R3928 - ANC Coefficient */ + { 0x00000F59, 0x0000 }, /* R3929 - ANC Coefficient */ + { 0x00000F5A, 0x0000 }, /* R3930 - ANC Coefficient */ + { 0x00000F5B, 0x0000 }, /* R3931 - ANC Coefficient */ + { 0x00000F5C, 0x0000 }, /* R3932 - ANC Coefficient */ + { 0x00000F5D, 0x0000 }, /* R3933 - ANC Coefficient */ + { 0x00000F5E, 0x0000 }, /* R3934 - ANC Coefficient */ + { 0x00000F5F, 0x0000 }, /* R3935 - ANC Coefficient */ + { 0x00000F60, 0x0000 }, /* R3936 - ANC Coefficient */ + { 0x00000F61, 0x0000 }, /* R3937 - ANC Coefficient */ + { 0x00000F62, 0x0000 }, /* R3938 - ANC Coefficient */ + { 0x00000F63, 0x0000 }, /* R3939 - ANC Coefficient */ + { 0x00000F64, 0x0000 }, /* R3940 - ANC Coefficient */ + { 0x00000F65, 0x0000 }, /* R3941 - ANC Coefficient */ + { 0x00000F66, 0x0000 }, /* R3942 - ANC Coefficient */ + { 0x00000F67, 0x0000 }, /* R3943 - ANC Coefficient */ + { 0x00000F68, 0x0000 }, /* R3944 - ANC Coefficient */ + { 0x00000F69, 0x0000 }, /* R3945 - ANC Coefficient */ + { 0x00000F70, 0x0000 }, /* R3952 - FCR Filter Control */ + { 0x00000F72, 0x0004 }, /* R3954 - FCR ADC Reformatter Control */ + { 0x00000F73, 0x0004 }, /* R3955 - ANC Coefficient */ + { 0x00000F74, 0x0002 }, /* R3956 - ANC Coefficient */ + { 0x00000F75, 0x0000 }, /* R3957 - ANC Coefficient */ + { 0x00000F76, 0x0010 }, /* R3958 - ANC Coefficient */ + { 0x00000F77, 0x0000 }, /* R3959 - ANC Coefficient */ + { 0x00000F78, 0x0000 }, /* R3960 - ANC Coefficient */ + { 0x00000F79, 0x0000 }, /* R3961 - ANC Coefficient */ + { 0x00000F7A, 0x0000 }, /* R3962 - ANC Coefficient */ + { 0x00000F7B, 0x0000 }, /* R3963 - ANC Coefficient */ + { 0x00000F7C, 0x0000 }, /* R3964 - ANC Coefficient */ + { 0x00000F7D, 0x0000 }, /* R3965 - ANC Coefficient */ + { 0x00000F7E, 0x0000 }, /* R3966 - ANC Coefficient */ + { 0x00000F7F, 0x0000 }, /* R3967 - ANC Coefficient */ + { 0x00000F80, 0x0000 }, /* R3968 - ANC Coefficient */ + { 0x00000F81, 0x0000 }, /* R3969 - ANC Coefficient */ + { 0x00000F82, 0x0000 }, /* R3970 - ANC Coefficient */ + { 0x00000F83, 0x0000 }, /* R3971 - ANC Coefficient */ + { 0x00000F84, 0x0000 }, /* R3972 - ANC Coefficient */ + { 0x00000F85, 0x0000 }, /* R3973 - ANC Coefficient */ + { 0x00000F86, 0x0000 }, /* R3974 - ANC Coefficient */ + { 0x00000F87, 0x0000 }, /* R3975 - ANC Coefficient */ + { 0x00000F88, 0x0000 }, /* R3976 - ANC Coefficient */ + { 0x00000F89, 0x0000 }, /* R3977 - ANC Coefficient */ + { 0x00000F8A, 0x0000 }, /* R3978 - ANC Coefficient */ + { 0x00000F8B, 0x0000 }, /* R3979 - ANC Coefficient */ + { 0x00000F8C, 0x0000 }, /* R3980 - ANC Coefficient */ + { 0x00000F8D, 0x0000 }, /* R3981 - ANC Coefficient */ + { 0x00000F8E, 0x0000 }, /* R3982 - ANC Coefficient */ + { 0x00000F8F, 0x0000 }, /* R3983 - ANC Coefficient */ + { 0x00000F90, 0x0000 }, /* R3984 - ANC Coefficient */ + { 0x00000F91, 0x0000 }, /* R3985 - ANC Coefficient */ + { 0x00000F92, 0x0000 }, /* R3986 - ANC Coefficient */ + { 0x00000F93, 0x0000 }, /* R3987 - ANC Coefficient */ + { 0x00000F94, 0x0000 }, /* R3988 - ANC Coefficient */ + { 0x00000F95, 0x0000 }, /* R3989 - ANC Coefficient */ + { 0x00000F96, 0x0000 }, /* R3990 - ANC Coefficient */ + { 0x00000F97, 0x0000 }, /* R3991 - ANC Coefficient */ + { 0x00000F98, 0x0000 }, /* R3992 - ANC Coefficient */ + { 0x00000F99, 0x0000 }, /* R3993 - ANC Coefficient */ + { 0x00000F9A, 0x0000 }, /* R3994 - ANC Coefficient */ + { 0x00000F9B, 0x0000 }, /* R3995 - ANC Coefficient */ + { 0x00000F9C, 0x0000 }, /* R3996 - ANC Coefficient */ + { 0x00000F9D, 0x0000 }, /* R3997 - ANC Coefficient */ + { 0x00000F9E, 0x0000 }, /* R3998 - ANC Coefficient */ + { 0x00000F9F, 0x0000 }, /* R3999 - ANC Coefficient */ + { 0x00000FA0, 0x0000 }, /* R4000 - ANC Coefficient */ + { 0x00000FA1, 0x0000 }, /* R4001 - ANC Coefficient */ + { 0x00000FA2, 0x0000 }, /* R4002 - ANC Coefficient */ + { 0x00000FA3, 0x0000 }, /* R4003 - ANC Coefficient */ + { 0x00000FA4, 0x0000 }, /* R4004 - ANC Coefficient */ + { 0x00000FA5, 0x0000 }, /* R4005 - ANC Coefficient */ + { 0x00000FA6, 0x0000 }, /* R4006 - ANC Coefficient */ + { 0x00000FA7, 0x0000 }, /* R4007 - ANC Coefficient */ + { 0x00000FA8, 0x0000 }, /* R4008 - ANC Coefficient */ + { 0x00000FA9, 0x0000 }, /* R4009 - ANC Coefficient */ + { 0x00000FAA, 0x0000 }, /* R4010 - ANC Coefficient */ + { 0x00000FAB, 0x0000 }, /* R4011 - ANC Coefficient */ + { 0x00000FAC, 0x0000 }, /* R4012 - ANC Coefficient */ + { 0x00000FAD, 0x0000 }, /* R4013 - ANC Coefficient */ + { 0x00000FAE, 0x0000 }, /* R4014 - ANC Coefficient */ + { 0x00000FAF, 0x0000 }, /* R4015 - ANC Coefficient */ + { 0x00000FB0, 0x0000 }, /* R4016 - ANC Coefficient */ + { 0x00000FB1, 0x0000 }, /* R4017 - ANC Coefficient */ + { 0x00000FB2, 0x0000 }, /* R4018 - ANC Coefficient */ + { 0x00000FB3, 0x0000 }, /* R4019 - ANC Coefficient */ + { 0x00000FB4, 0x0000 }, /* R4020 - ANC Coefficient */ + { 0x00000FB5, 0x0000 }, /* R4021 - ANC Coefficient */ + { 0x00000FB6, 0x0000 }, /* R4022 - ANC Coefficient */ + { 0x00000FB7, 0x0000 }, /* R4023 - ANC Coefficient */ + { 0x00000FB8, 0x0000 }, /* R4024 - ANC Coefficient */ + { 0x00000FB9, 0x0000 }, /* R4025 - ANC Coefficient */ + { 0x00000FBA, 0x0000 }, /* R4026 - ANC Coefficient */ + { 0x00000FBB, 0x0000 }, /* R4027 - ANC Coefficient */ + { 0x00000FBC, 0x0000 }, /* R4028 - ANC Coefficient */ + { 0x00000FBD, 0x0000 }, /* R4029 - ANC Coefficient */ + { 0x00000FBE, 0x0000 }, /* R4030 - ANC Coefficient */ + { 0x00000FBF, 0x0000 }, /* R4031 - ANC Coefficient */ + { 0x00000FC0, 0x0000 }, /* R4032 - ANC Coefficient */ + { 0x00000FC1, 0x0000 }, /* R4033 - ANC Coefficient */ + { 0x00000FC2, 0x0000 }, /* R4034 - ANC Coefficient */ + { 0x00000FC3, 0x0000 }, /* R4035 - ANC Coefficient */ + { 0x00000FC4, 0x0000 }, /* R4036 - ANC Coefficient */ { 0x00001100, 0x0010 }, /* R4352 - DSP1 Control 1 */ { 0x00001101, 0x0000 }, /* R4353 - DSP1 Clocking 1 */ { 0x00001200, 0x0010 }, /* R4608 - DSP2 Control 1 */ @@ -2716,6 +2894,13 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_CLOCK_CONTROL: case ARIZONA_ANC_SRC: case ARIZONA_DSP_STATUS: + case ARIZONA_ANC_COEFF_START ... ARIZONA_ANC_COEFF_END: + case ARIZONA_FCL_FILTER_CONTROL: + case ARIZONA_FCL_ADC_REFORMATTER_CONTROL: + case ARIZONA_FCL_COEFF_START ... ARIZONA_FCL_COEFF_END: + case ARIZONA_FCR_FILTER_CONTROL: + case ARIZONA_FCR_ADC_REFORMATTER_CONTROL: + case ARIZONA_FCR_COEFF_START ... ARIZONA_FCR_COEFF_END: case ARIZONA_DSP1_CONTROL_1: case ARIZONA_DSP1_CLOCKING_1: case ARIZONA_DSP1_STATUS_1: diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 11affb3..fdb12bf 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -1050,6 +1050,16 @@ #define ARIZONA_CLOCK_CONTROL 0xF00 #define ARIZONA_ANC_SRC 0xF01 #define ARIZONA_DSP_STATUS 0xF02 +#define ARIZONA_ANC_COEFF_START 0xF08 +#define ARIZONA_ANC_COEFF_END 0xF12 +#define ARIZONA_FCL_FILTER_CONTROL 0xF15 +#define ARIZONA_FCL_ADC_REFORMATTER_CONTROL 0xF17 +#define ARIZONA_FCL_COEFF_START 0xF18 +#define ARIZONA_FCL_COEFF_END 0xF69 +#define ARIZONA_FCR_FILTER_CONTROL 0xF70 +#define ARIZONA_FCR_ADC_REFORMATTER_CONTROL 0xF72 +#define ARIZONA_FCR_COEFF_START 0xF73 +#define ARIZONA_FCR_COEFF_END 0xFC4 #define ARIZONA_DSP1_CONTROL_1 0x1100 #define ARIZONA_DSP1_CLOCKING_1 0x1101 #define ARIZONA_DSP1_STATUS_1 0x1104 @@ -7823,6 +7833,66 @@ #define ARIZONA_ISRC3_NOTCH_ENA_WIDTH 1 /* ISRC3_NOTCH_ENA */ /* + * R3840 (0xF00) - Clock Control + */ +#define ARIZONA_EXT_NG_SEL_CLR 0x0080 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_CLR_MASK 0x0080 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_CLR_SHIFT 7 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_CLR_WIDTH 1 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_SET 0x0040 /* EXT_NG_SEL_SET */ +#define ARIZONA_EXT_NG_SEL_SET_MASK 0x0040 /* EXT_NG_SEL_SET */ +#define ARIZONA_EXT_NG_SEL_SET_SHIFT 6 /* EXT_NG_SEL_SET */ +#define ARIZONA_EXT_NG_SEL_SET_WIDTH 1 /* EXT_NG_SEL_SET */ +#define ARIZONA_CLK_R_ENA_CLR 0x0020 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_CLR_MASK 0x0020 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_CLR_SHIFT 5 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_CLR_WIDTH 1 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_SET 0x0010 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_R_ENA_SET_MASK 0x0010 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_R_ENA_SET_SHIFT 4 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_R_ENA_SET_WIDTH 1 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_CLR 0x0008 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_CLR_MASK 0x0008 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_CLR_SHIFT 3 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_CLR_WIDTH 1 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_SET 0x0004 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_SET_MASK 0x0004 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_SET_SHIFT 2 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_SET_WIDTH 1 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_L_ENA_CLR 0x0002 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_CLR_MASK 0x0002 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_CLR_SHIFT 1 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_CLR_WIDTH 1 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_SET 0x0001 /* CLK_L_ENA_SET */ +#define ARIZONA_CLK_L_ENA_SET_MASK 0x0001 /* CLK_L_ENA_SET */ +#define ARIZONA_CLK_L_ENA_SET_SHIFT 0 /* CLK_L_ENA_SET */ +#define ARIZONA_CLK_L_ENA_SET_WIDTH 1 /* CLK_L_ENA_SET */ + +/* + * R3841 (0xF01) - ANC SRC + */ +#define ARIZONA_IN_RXANCR_SEL_MASK 0x0070 /* IN_RXANCR_SEL - [4:6] */ +#define ARIZONA_IN_RXANCR_SEL_SHIFT 4 /* IN_RXANCR_SEL - [4:6] */ +#define ARIZONA_IN_RXANCR_SEL_WIDTH 3 /* IN_RXANCR_SEL - [4:6] */ +#define ARIZONA_IN_RXANCL_SEL_MASK 0x0007 /* IN_RXANCL_SEL - [0:2] */ +#define ARIZONA_IN_RXANCL_SEL_SHIFT 0 /* IN_RXANCL_SEL - [0:2] */ +#define ARIZONA_IN_RXANCL_SEL_WIDTH 3 /* IN_RXANCL_SEL - [0:2] */ + +/* + * R3863 (0xF17) - FCL ADC Reformatter Control + */ +#define ARIZONA_FCL_MIC_MODE_SEL 0x000C /* FCL_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCL_MIC_MODE_SEL_SHIFT 2 /* FCL_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCL_MIC_MODE_SEL_WIDTH 2 /* FCL_MIC_MODE_SEL - [2:3] */ + +/* + * R3954 (0xF72) - FCR ADC Reformatter Control + */ +#define ARIZONA_FCR_MIC_MODE_SEL 0x000C /* FCR_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCR_MIC_MODE_SEL_SHIFT 2 /* FCR_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCR_MIC_MODE_SEL_WIDTH 2 /* FCR_MIC_MODE_SEL - [2:3] */ + +/* * R4352 (0x1100) - DSP1 Control 1 */ #define ARIZONA_DSP1_RATE_MASK 0x7800 /* DSP1_RATE - [14:11] */ -- 1.7.2.5

2 3

[alsa-devel] [PATCH v2 1/2] mfd: arizona: Add register bits to support the ANC block
by Charles Keepax 27 Aug '15

27 Aug '15

Some Arizona devices have a hardware ANC block present. This patch adds the registers necessary to configure this hardware block. Signed-off-by: Charles Keepax <ckeepax(a)opensource.wolfsonmicro.com> --- drivers/mfd/wm5110-tables.c | 185 +++++++++++++++++++++++++++++++++ include/linux/mfd/arizona/registers.h | 70 +++++++++++++ 2 files changed, 255 insertions(+), 0 deletions(-) diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index dae04dd..71b84cd 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -1637,6 +1637,184 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000EF8, 0x0000 }, /* R3832 - ISRC 3 CTRL 3 */ { 0x00000F00, 0x0000 }, /* R3840 - Clock Control */ { 0x00000F01, 0x0000 }, /* R3841 - ANC_SRC */ + { 0x00000F08, 0x001c }, /* R3848 - ANC Coefficient */ + { 0x00000F09, 0x0000 }, /* R3849 - ANC Coefficient */ + { 0x00000F0B, 0x0000 }, /* R3851 - ANC Coefficient */ + { 0x00000F0C, 0x0000 }, /* R3852 - ANC Coefficient */ + { 0x00000F0D, 0x0000 }, /* R3853 - ANC Coefficient */ + { 0x00000F0E, 0x0000 }, /* R3854 - ANC Coefficient */ + { 0x00000F0F, 0x0000 }, /* R3855 - ANC Coefficient */ + { 0x00000F10, 0x0000 }, /* R3856 - ANC Coefficient */ + { 0x00000F11, 0x0000 }, /* R3857 - ANC Coefficient */ + { 0x00000F12, 0x0000 }, /* R3858 - ANC Coefficient */ + { 0x00000F15, 0x0000 }, /* R3861 - FCL Filter Control */ + { 0x00000F17, 0x0004 }, /* R3863 - FCL ADC Reformatter Control */ + { 0x00000F18, 0x0004 }, /* R3864 - ANC Coefficient */ + { 0x00000F19, 0x0002 }, /* R3865 - ANC Coefficient */ + { 0x00000F1A, 0x0000 }, /* R3866 - ANC Coefficient */ + { 0x00000F1B, 0x0010 }, /* R3867 - ANC Coefficient */ + { 0x00000F1C, 0x0000 }, /* R3868 - ANC Coefficient */ + { 0x00000F1D, 0x0000 }, /* R3869 - ANC Coefficient */ + { 0x00000F1E, 0x0000 }, /* R3870 - ANC Coefficient */ + { 0x00000F1F, 0x0000 }, /* R3871 - ANC Coefficient */ + { 0x00000F20, 0x0000 }, /* R3872 - ANC Coefficient */ + { 0x00000F21, 0x0000 }, /* R3873 - ANC Coefficient */ + { 0x00000F22, 0x0000 }, /* R3874 - ANC Coefficient */ + { 0x00000F23, 0x0000 }, /* R3875 - ANC Coefficient */ + { 0x00000F24, 0x0000 }, /* R3876 - ANC Coefficient */ + { 0x00000F25, 0x0000 }, /* R3877 - ANC Coefficient */ + { 0x00000F26, 0x0000 }, /* R3878 - ANC Coefficient */ + { 0x00000F27, 0x0000 }, /* R3879 - ANC Coefficient */ + { 0x00000F28, 0x0000 }, /* R3880 - ANC Coefficient */ + { 0x00000F29, 0x0000 }, /* R3881 - ANC Coefficient */ + { 0x00000F2A, 0x0000 }, /* R3882 - ANC Coefficient */ + { 0x00000F2B, 0x0000 }, /* R3883 - ANC Coefficient */ + { 0x00000F2C, 0x0000 }, /* R3884 - ANC Coefficient */ + { 0x00000F2D, 0x0000 }, /* R3885 - ANC Coefficient */ + { 0x00000F2E, 0x0000 }, /* R3886 - ANC Coefficient */ + { 0x00000F2F, 0x0000 }, /* R3887 - ANC Coefficient */ + { 0x00000F30, 0x0000 }, /* R3888 - ANC Coefficient */ + { 0x00000F31, 0x0000 }, /* R3889 - ANC Coefficient */ + { 0x00000F32, 0x0000 }, /* R3890 - ANC Coefficient */ + { 0x00000F33, 0x0000 }, /* R3891 - ANC Coefficient */ + { 0x00000F34, 0x0000 }, /* R3892 - ANC Coefficient */ + { 0x00000F35, 0x0000 }, /* R3893 - ANC Coefficient */ + { 0x00000F36, 0x0000 }, /* R3894 - ANC Coefficient */ + { 0x00000F37, 0x0000 }, /* R3895 - ANC Coefficient */ + { 0x00000F38, 0x0000 }, /* R3896 - ANC Coefficient */ + { 0x00000F39, 0x0000 }, /* R3897 - ANC Coefficient */ + { 0x00000F3A, 0x0000 }, /* R3898 - ANC Coefficient */ + { 0x00000F3B, 0x0000 }, /* R3899 - ANC Coefficient */ + { 0x00000F3C, 0x0000 }, /* R3900 - ANC Coefficient */ + { 0x00000F3D, 0x0000 }, /* R3901 - ANC Coefficient */ + { 0x00000F3E, 0x0000 }, /* R3902 - ANC Coefficient */ + { 0x00000F3F, 0x0000 }, /* R3903 - ANC Coefficient */ + { 0x00000F40, 0x0000 }, /* R3904 - ANC Coefficient */ + { 0x00000F41, 0x0000 }, /* R3905 - ANC Coefficient */ + { 0x00000F42, 0x0000 }, /* R3906 - ANC Coefficient */ + { 0x00000F43, 0x0000 }, /* R3907 - ANC Coefficient */ + { 0x00000F44, 0x0000 }, /* R3908 - ANC Coefficient */ + { 0x00000F45, 0x0000 }, /* R3909 - ANC Coefficient */ + { 0x00000F46, 0x0000 }, /* R3910 - ANC Coefficient */ + { 0x00000F47, 0x0000 }, /* R3911 - ANC Coefficient */ + { 0x00000F48, 0x0000 }, /* R3912 - ANC Coefficient */ + { 0x00000F49, 0x0000 }, /* R3913 - ANC Coefficient */ + { 0x00000F4A, 0x0000 }, /* R3914 - ANC Coefficient */ + { 0x00000F4B, 0x0000 }, /* R3915 - ANC Coefficient */ + { 0x00000F4C, 0x0000 }, /* R3916 - ANC Coefficient */ + { 0x00000F4D, 0x0000 }, /* R3917 - ANC Coefficient */ + { 0x00000F4E, 0x0000 }, /* R3918 - ANC Coefficient */ + { 0x00000F4F, 0x0000 }, /* R3919 - ANC Coefficient */ + { 0x00000F50, 0x0000 }, /* R3920 - ANC Coefficient */ + { 0x00000F51, 0x0000 }, /* R3921 - ANC Coefficient */ + { 0x00000F52, 0x0000 }, /* R3922 - ANC Coefficient */ + { 0x00000F53, 0x0000 }, /* R3923 - ANC Coefficient */ + { 0x00000F54, 0x0000 }, /* R3924 - ANC Coefficient */ + { 0x00000F55, 0x0000 }, /* R3925 - ANC Coefficient */ + { 0x00000F56, 0x0000 }, /* R3926 - ANC Coefficient */ + { 0x00000F57, 0x0000 }, /* R3927 - ANC Coefficient */ + { 0x00000F58, 0x0000 }, /* R3928 - ANC Coefficient */ + { 0x00000F59, 0x0000 }, /* R3929 - ANC Coefficient */ + { 0x00000F5A, 0x0000 }, /* R3930 - ANC Coefficient */ + { 0x00000F5B, 0x0000 }, /* R3931 - ANC Coefficient */ + { 0x00000F5C, 0x0000 }, /* R3932 - ANC Coefficient */ + { 0x00000F5D, 0x0000 }, /* R3933 - ANC Coefficient */ + { 0x00000F5E, 0x0000 }, /* R3934 - ANC Coefficient */ + { 0x00000F5F, 0x0000 }, /* R3935 - ANC Coefficient */ + { 0x00000F60, 0x0000 }, /* R3936 - ANC Coefficient */ + { 0x00000F61, 0x0000 }, /* R3937 - ANC Coefficient */ + { 0x00000F62, 0x0000 }, /* R3938 - ANC Coefficient */ + { 0x00000F63, 0x0000 }, /* R3939 - ANC Coefficient */ + { 0x00000F64, 0x0000 }, /* R3940 - ANC Coefficient */ + { 0x00000F65, 0x0000 }, /* R3941 - ANC Coefficient */ + { 0x00000F66, 0x0000 }, /* R3942 - ANC Coefficient */ + { 0x00000F67, 0x0000 }, /* R3943 - ANC Coefficient */ + { 0x00000F68, 0x0000 }, /* R3944 - ANC Coefficient */ + { 0x00000F69, 0x0000 }, /* R3945 - ANC Coefficient */ + { 0x00000F70, 0x0000 }, /* R3952 - FCR Filter Control */ + { 0x00000F72, 0x0004 }, /* R3954 - FCR ADC Reformatter Control */ + { 0x00000F73, 0x0004 }, /* R3955 - ANC Coefficient */ + { 0x00000F74, 0x0002 }, /* R3956 - ANC Coefficient */ + { 0x00000F75, 0x0000 }, /* R3957 - ANC Coefficient */ + { 0x00000F76, 0x0010 }, /* R3958 - ANC Coefficient */ + { 0x00000F77, 0x0000 }, /* R3959 - ANC Coefficient */ + { 0x00000F78, 0x0000 }, /* R3960 - ANC Coefficient */ + { 0x00000F79, 0x0000 }, /* R3961 - ANC Coefficient */ + { 0x00000F7A, 0x0000 }, /* R3962 - ANC Coefficient */ + { 0x00000F7B, 0x0000 }, /* R3963 - ANC Coefficient */ + { 0x00000F7C, 0x0000 }, /* R3964 - ANC Coefficient */ + { 0x00000F7D, 0x0000 }, /* R3965 - ANC Coefficient */ + { 0x00000F7E, 0x0000 }, /* R3966 - ANC Coefficient */ + { 0x00000F7F, 0x0000 }, /* R3967 - ANC Coefficient */ + { 0x00000F80, 0x0000 }, /* R3968 - ANC Coefficient */ + { 0x00000F81, 0x0000 }, /* R3969 - ANC Coefficient */ + { 0x00000F82, 0x0000 }, /* R3970 - ANC Coefficient */ + { 0x00000F83, 0x0000 }, /* R3971 - ANC Coefficient */ + { 0x00000F84, 0x0000 }, /* R3972 - ANC Coefficient */ + { 0x00000F85, 0x0000 }, /* R3973 - ANC Coefficient */ + { 0x00000F86, 0x0000 }, /* R3974 - ANC Coefficient */ + { 0x00000F87, 0x0000 }, /* R3975 - ANC Coefficient */ + { 0x00000F88, 0x0000 }, /* R3976 - ANC Coefficient */ + { 0x00000F89, 0x0000 }, /* R3977 - ANC Coefficient */ + { 0x00000F8A, 0x0000 }, /* R3978 - ANC Coefficient */ + { 0x00000F8B, 0x0000 }, /* R3979 - ANC Coefficient */ + { 0x00000F8C, 0x0000 }, /* R3980 - ANC Coefficient */ + { 0x00000F8D, 0x0000 }, /* R3981 - ANC Coefficient */ + { 0x00000F8E, 0x0000 }, /* R3982 - ANC Coefficient */ + { 0x00000F8F, 0x0000 }, /* R3983 - ANC Coefficient */ + { 0x00000F90, 0x0000 }, /* R3984 - ANC Coefficient */ + { 0x00000F91, 0x0000 }, /* R3985 - ANC Coefficient */ + { 0x00000F92, 0x0000 }, /* R3986 - ANC Coefficient */ + { 0x00000F93, 0x0000 }, /* R3987 - ANC Coefficient */ + { 0x00000F94, 0x0000 }, /* R3988 - ANC Coefficient */ + { 0x00000F95, 0x0000 }, /* R3989 - ANC Coefficient */ + { 0x00000F96, 0x0000 }, /* R3990 - ANC Coefficient */ + { 0x00000F97, 0x0000 }, /* R3991 - ANC Coefficient */ + { 0x00000F98, 0x0000 }, /* R3992 - ANC Coefficient */ + { 0x00000F99, 0x0000 }, /* R3993 - ANC Coefficient */ + { 0x00000F9A, 0x0000 }, /* R3994 - ANC Coefficient */ + { 0x00000F9B, 0x0000 }, /* R3995 - ANC Coefficient */ + { 0x00000F9C, 0x0000 }, /* R3996 - ANC Coefficient */ + { 0x00000F9D, 0x0000 }, /* R3997 - ANC Coefficient */ + { 0x00000F9E, 0x0000 }, /* R3998 - ANC Coefficient */ + { 0x00000F9F, 0x0000 }, /* R3999 - ANC Coefficient */ + { 0x00000FA0, 0x0000 }, /* R4000 - ANC Coefficient */ + { 0x00000FA1, 0x0000 }, /* R4001 - ANC Coefficient */ + { 0x00000FA2, 0x0000 }, /* R4002 - ANC Coefficient */ + { 0x00000FA3, 0x0000 }, /* R4003 - ANC Coefficient */ + { 0x00000FA4, 0x0000 }, /* R4004 - ANC Coefficient */ + { 0x00000FA5, 0x0000 }, /* R4005 - ANC Coefficient */ + { 0x00000FA6, 0x0000 }, /* R4006 - ANC Coefficient */ + { 0x00000FA7, 0x0000 }, /* R4007 - ANC Coefficient */ + { 0x00000FA8, 0x0000 }, /* R4008 - ANC Coefficient */ + { 0x00000FA9, 0x0000 }, /* R4009 - ANC Coefficient */ + { 0x00000FAA, 0x0000 }, /* R4010 - ANC Coefficient */ + { 0x00000FAB, 0x0000 }, /* R4011 - ANC Coefficient */ + { 0x00000FAC, 0x0000 }, /* R4012 - ANC Coefficient */ + { 0x00000FAD, 0x0000 }, /* R4013 - ANC Coefficient */ + { 0x00000FAE, 0x0000 }, /* R4014 - ANC Coefficient */ + { 0x00000FAF, 0x0000 }, /* R4015 - ANC Coefficient */ + { 0x00000FB0, 0x0000 }, /* R4016 - ANC Coefficient */ + { 0x00000FB1, 0x0000 }, /* R4017 - ANC Coefficient */ + { 0x00000FB2, 0x0000 }, /* R4018 - ANC Coefficient */ + { 0x00000FB3, 0x0000 }, /* R4019 - ANC Coefficient */ + { 0x00000FB4, 0x0000 }, /* R4020 - ANC Coefficient */ + { 0x00000FB5, 0x0000 }, /* R4021 - ANC Coefficient */ + { 0x00000FB6, 0x0000 }, /* R4022 - ANC Coefficient */ + { 0x00000FB7, 0x0000 }, /* R4023 - ANC Coefficient */ + { 0x00000FB8, 0x0000 }, /* R4024 - ANC Coefficient */ + { 0x00000FB9, 0x0000 }, /* R4025 - ANC Coefficient */ + { 0x00000FBA, 0x0000 }, /* R4026 - ANC Coefficient */ + { 0x00000FBB, 0x0000 }, /* R4027 - ANC Coefficient */ + { 0x00000FBC, 0x0000 }, /* R4028 - ANC Coefficient */ + { 0x00000FBD, 0x0000 }, /* R4029 - ANC Coefficient */ + { 0x00000FBE, 0x0000 }, /* R4030 - ANC Coefficient */ + { 0x00000FBF, 0x0000 }, /* R4031 - ANC Coefficient */ + { 0x00000FC0, 0x0000 }, /* R4032 - ANC Coefficient */ + { 0x00000FC1, 0x0000 }, /* R4033 - ANC Coefficient */ + { 0x00000FC2, 0x0000 }, /* R4034 - ANC Coefficient */ + { 0x00000FC3, 0x0000 }, /* R4035 - ANC Coefficient */ + { 0x00000FC4, 0x0000 }, /* R4036 - ANC Coefficient */ { 0x00001100, 0x0010 }, /* R4352 - DSP1 Control 1 */ { 0x00001101, 0x0000 }, /* R4353 - DSP1 Clocking 1 */ { 0x00001200, 0x0010 }, /* R4608 - DSP2 Control 1 */ @@ -2716,6 +2894,13 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_CLOCK_CONTROL: case ARIZONA_ANC_SRC: case ARIZONA_DSP_STATUS: + case ARIZONA_ANC_COEFF_START ... ARIZONA_ANC_COEFF_END: + case ARIZONA_FCL_FILTER_CONTROL: + case ARIZONA_FCL_ADC_REFORMATTER_CONTROL: + case ARIZONA_FCL_COEFF_START ... ARIZONA_FCL_COEFF_END: + case ARIZONA_FCR_FILTER_CONTROL: + case ARIZONA_FCR_ADC_REFORMATTER_CONTROL: + case ARIZONA_FCR_COEFF_START ... ARIZONA_FCR_COEFF_END: case ARIZONA_DSP1_CONTROL_1: case ARIZONA_DSP1_CLOCKING_1: case ARIZONA_DSP1_STATUS_1: diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 11affb3..fdb12bf 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -1050,6 +1050,16 @@ #define ARIZONA_CLOCK_CONTROL 0xF00 #define ARIZONA_ANC_SRC 0xF01 #define ARIZONA_DSP_STATUS 0xF02 +#define ARIZONA_ANC_COEFF_START 0xF08 +#define ARIZONA_ANC_COEFF_END 0xF12 +#define ARIZONA_FCL_FILTER_CONTROL 0xF15 +#define ARIZONA_FCL_ADC_REFORMATTER_CONTROL 0xF17 +#define ARIZONA_FCL_COEFF_START 0xF18 +#define ARIZONA_FCL_COEFF_END 0xF69 +#define ARIZONA_FCR_FILTER_CONTROL 0xF70 +#define ARIZONA_FCR_ADC_REFORMATTER_CONTROL 0xF72 +#define ARIZONA_FCR_COEFF_START 0xF73 +#define ARIZONA_FCR_COEFF_END 0xFC4 #define ARIZONA_DSP1_CONTROL_1 0x1100 #define ARIZONA_DSP1_CLOCKING_1 0x1101 #define ARIZONA_DSP1_STATUS_1 0x1104 @@ -7823,6 +7833,66 @@ #define ARIZONA_ISRC3_NOTCH_ENA_WIDTH 1 /* ISRC3_NOTCH_ENA */ /* + * R3840 (0xF00) - Clock Control + */ +#define ARIZONA_EXT_NG_SEL_CLR 0x0080 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_CLR_MASK 0x0080 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_CLR_SHIFT 7 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_CLR_WIDTH 1 /* EXT_NG_SEL_CLR */ +#define ARIZONA_EXT_NG_SEL_SET 0x0040 /* EXT_NG_SEL_SET */ +#define ARIZONA_EXT_NG_SEL_SET_MASK 0x0040 /* EXT_NG_SEL_SET */ +#define ARIZONA_EXT_NG_SEL_SET_SHIFT 6 /* EXT_NG_SEL_SET */ +#define ARIZONA_EXT_NG_SEL_SET_WIDTH 1 /* EXT_NG_SEL_SET */ +#define ARIZONA_CLK_R_ENA_CLR 0x0020 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_CLR_MASK 0x0020 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_CLR_SHIFT 5 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_CLR_WIDTH 1 /* CLK_R_ENA_CLR */ +#define ARIZONA_CLK_R_ENA_SET 0x0010 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_R_ENA_SET_MASK 0x0010 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_R_ENA_SET_SHIFT 4 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_R_ENA_SET_WIDTH 1 /* CLK_R_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_CLR 0x0008 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_CLR_MASK 0x0008 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_CLR_SHIFT 3 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_CLR_WIDTH 1 /* CLK_NG_ENA_CLR */ +#define ARIZONA_CLK_NG_ENA_SET 0x0004 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_SET_MASK 0x0004 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_SET_SHIFT 2 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_NG_ENA_SET_WIDTH 1 /* CLK_NG_ENA_SET */ +#define ARIZONA_CLK_L_ENA_CLR 0x0002 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_CLR_MASK 0x0002 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_CLR_SHIFT 1 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_CLR_WIDTH 1 /* CLK_L_ENA_CLR */ +#define ARIZONA_CLK_L_ENA_SET 0x0001 /* CLK_L_ENA_SET */ +#define ARIZONA_CLK_L_ENA_SET_MASK 0x0001 /* CLK_L_ENA_SET */ +#define ARIZONA_CLK_L_ENA_SET_SHIFT 0 /* CLK_L_ENA_SET */ +#define ARIZONA_CLK_L_ENA_SET_WIDTH 1 /* CLK_L_ENA_SET */ + +/* + * R3841 (0xF01) - ANC SRC + */ +#define ARIZONA_IN_RXANCR_SEL_MASK 0x0070 /* IN_RXANCR_SEL - [4:6] */ +#define ARIZONA_IN_RXANCR_SEL_SHIFT 4 /* IN_RXANCR_SEL - [4:6] */ +#define ARIZONA_IN_RXANCR_SEL_WIDTH 3 /* IN_RXANCR_SEL - [4:6] */ +#define ARIZONA_IN_RXANCL_SEL_MASK 0x0007 /* IN_RXANCL_SEL - [0:2] */ +#define ARIZONA_IN_RXANCL_SEL_SHIFT 0 /* IN_RXANCL_SEL - [0:2] */ +#define ARIZONA_IN_RXANCL_SEL_WIDTH 3 /* IN_RXANCL_SEL - [0:2] */ + +/* + * R3863 (0xF17) - FCL ADC Reformatter Control + */ +#define ARIZONA_FCL_MIC_MODE_SEL 0x000C /* FCL_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCL_MIC_MODE_SEL_SHIFT 2 /* FCL_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCL_MIC_MODE_SEL_WIDTH 2 /* FCL_MIC_MODE_SEL - [2:3] */ + +/* + * R3954 (0xF72) - FCR ADC Reformatter Control + */ +#define ARIZONA_FCR_MIC_MODE_SEL 0x000C /* FCR_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCR_MIC_MODE_SEL_SHIFT 2 /* FCR_MIC_MODE_SEL - [2:3] */ +#define ARIZONA_FCR_MIC_MODE_SEL_WIDTH 2 /* FCR_MIC_MODE_SEL - [2:3] */ + +/* * R4352 (0x1100) - DSP1 Control 1 */ #define ARIZONA_DSP1_RATE_MASK 0x7800 /* DSP1_RATE - [14:11] */ -- 1.7.2.5

1 1

[alsa-devel] Out-of-tree HDMI audio driver for BayTrail-T
by David Henningsson 27 Aug '15

27 Aug '15

I don't usually deal with out-of-tree drivers, but when Canonical enabled the Intel Compute Stick [1] (which is using a BayTrail-T processor), we were using an out-of-tree driver to enable HDMI audio. The driver has earlier been made public by Intel [2], and I've put my modifications to it here [3]. Unfortunately, it looks like the effort and hardware knowledge required to make this driver upstreamable is beyond what I can currently manage. Also, I cannot answer for whether or not other parties (such as Intel) plan to upstream the driver. -- David Henningsson, Canonical Ltd. https://launchpad.net/~diwic [1] http://www.intel.com/content/www/us/en/compute-stick/intel-compute-stick.ht… [2] https://github.com/01org/baytrailaudio [3] http://kernel.ubuntu.com/git/diwic/baytrail-hdmi-audio.git/log/?h=baytrail-…

2 1

[alsa-devel] [PATCH v5 1/4] drm/i915: Add audio sync_audio_rate callback
by libin.yang＠intel.com 27 Aug '15

27 Aug '15

From: Libin Yang <libin.yang(a)intel.com> Add the sync_audio_rate callback. With the callback, audio driver can trigger i915 driver to set the proper N/CTS or N/M based on different sample rates. Signed-off-by: Libin Yang <libin.yang(a)intel.com> --- include/drm/i915_component.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h index c9a8b64..aabebcb 100644 --- a/include/drm/i915_component.h +++ b/include/drm/i915_component.h @@ -33,6 +33,7 @@ struct i915_audio_component { void (*put_power)(struct device *); void (*codec_wake_override)(struct device *, bool enable); int (*get_cdclk_freq)(struct device *); + int (*sync_audio_rate)(struct device *, int port, int rate); } *ops; }; -- 1.9.1

5 18