July 2015 - Alsa-devel - mailman.alsa-project.org

Re: [alsa-devel] [ANNOUNCE] Media Controller workshop in Helsinki
by Lars-Peter Clausen 08 Jul '15

08 Jul '15

Cc: ALSA ML On 07/08/2015 01:16 PM, Mauro Carvalho Chehab wrote: > Hi, > > As discussed on our IRC #v4l channel at Freenode, we'll be running a 3-day > Media Controller workshop in Helsinki between July 29-31. > > The main goal of this workshop is to fixup the problems with the Media > Controller API to properly represent device nodes and the control tree, as > this is a requirement for the Media Controller to be used by DVB, ALSA and > radio devices. > > This is an invitation-only event, as we want to be sure that we'll have > there people that are actively working with the Media Controller, DVB > and/or ALSA. So, if you think this is for you, please send us an e-mail. > > Also, even if you're not able to participate, feel free to submit > relevant topics related to the Media Controller, in order to help us to > build the workshop's agenda and take other needs into account when working > on the needed API changes. > > As usual, we'll be using the media-workshop(a)linuxtv.org ML for the > specific discussions about that, so the ones interested on participate on > such discussions and/or be present there are requested to subscribe it, > and to submit themes of interest via the mailing lists. > > For those interested on this theme, I'll add a list of the most relevant > past discussions about this theme. > > Hope to see you there! > > Regards, Mauro > > --- > > The DVB needs with regards to MC are mapped on those two blog entries: > http://blogs.s-osg.org/media-controller-support-for-dvb-part-1/ > http://blogs.s-osg.org/the-role-of-dtv-network-interfaces-in-media-controll… > > We had two discussions about MC on our last mini-summit, back on March, > 26. The discussions and slides can be found at: > http://linuxtv.org/news.php?entry=2015-05-05.mchehab > http://www.linuxtv.org/downloads/presentations/media_summit_2015_US/dtv_med… > > A summary of the issues can also be seen on the emails below: > https://www.mail-archive.com/linux-media@vger.kernel.org/msg85910.html > https://www.mail-archive.com/linux-media@vger.kernel.org/msg85979.html > https://www.mail-archive.com/linux-media@vger.kernel.org/msg83883.html > https://www.mail-archive.com/linux-media@vger.kernel.org/msg83884.html > > Patches that minimally expose DVB via MC were merged on Kernel 4.1, > although it is currently marked as BROKEN, in order to tag those API > extensions as likely to change on future versions. > > The initial patchset proposal for ALSA support on MC is there at: > http://www.spinics.net/lists/linux-media/msg89574.html > > The most recent proposal for such fixup can be seen at: > http://www.spinics.net/lists/linux-media/msg91365.html

2 1

[alsa-devel] [PATCH] ASoC: Free card DAPM context on snd_soc_instantiate_card() error path
by Lars-Peter Clausen 08 Jul '15

08 Jul '15

Make sure the to free the card DAPM context if snd_soc_instantiate_card() fails, otherwise the memory allocated for the DAPM widgets is leaked. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/soc-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 2fc461c..8c8ce65 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1728,6 +1728,7 @@ card_probe_error: if (card->remove) card->remove(card); + snd_soc_dapm_free(&card->dapm); soc_cleanup_card_debugfs(card); snd_card_free(card->snd_card); -- 2.1.4

2 1

[alsa-devel] [PATCH 1/3] mfd: wm5110: Add registers for custom write sequence triggers
by Charles Keepax 08 Jul '15

08 Jul '15

This register will be needed as part of some additional support for the headphone path on wm5110, so this patch adds the register and sets up its regmap config. Signed-off-by: Charles Keepax <ckeepax(a)opensource.wolfsonmicro.com> --- I have based the series on Mark's ASoC since that is where most of the work is. The MFD patches are pretty trivial but I am happy to send a series based on the MFD tree if preferred. Thanks, Charles drivers/mfd/wm5110-tables.c | 2 + include/linux/mfd/arizona/registers.h | 37 +++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 0 deletions(-) diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 12cad94..62a4aa1 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -676,6 +676,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000032, 0x0100 }, /* R50 - PWM Drive 3 */ { 0x00000040, 0x0000 }, /* R64 - Wake control */ { 0x00000041, 0x0000 }, /* R65 - Sequence control */ + { 0x00000042, 0x0000 }, /* R66 - Spare Triggers */ { 0x00000061, 0x01FF }, /* R97 - Sample Rate Sequence Select 1 */ { 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */ { 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */ @@ -1716,6 +1717,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_PWM_DRIVE_3: case ARIZONA_WAKE_CONTROL: case ARIZONA_SEQUENCE_CONTROL: + case ARIZONA_SPARE_TRIGGERS: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3: diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index aacc10d..f43aa56 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -39,6 +39,7 @@ #define ARIZONA_PWM_DRIVE_3 0x32 #define ARIZONA_WAKE_CONTROL 0x40 #define ARIZONA_SEQUENCE_CONTROL 0x41 +#define ARIZONA_SPARE_TRIGGERS 0x42 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1 0x61 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2 0x62 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3 0x63 @@ -1431,6 +1432,42 @@ #define ARIZONA_WSEQ_ENA_JD2_RISE_WIDTH 1 /* WSEQ_ENA_JD2_RISE */ /* + * R66 (0x42) - Spare Triggers + */ +#define ARIZONA_WS_TRG8 0x0080 /* WS_TRG8 */ +#define ARIZONA_WS_TRG8_MASK 0x0080 /* WS_TRG8 */ +#define ARIZONA_WS_TRG8_SHIFT 7 /* WS_TRG8 */ +#define ARIZONA_WS_TRG8_WIDTH 1 /* WS_TRG8 */ +#define ARIZONA_WS_TRG7 0x0040 /* WS_TRG7 */ +#define ARIZONA_WS_TRG7_MASK 0x0040 /* WS_TRG7 */ +#define ARIZONA_WS_TRG7_SHIFT 6 /* WS_TRG7 */ +#define ARIZONA_WS_TRG7_WIDTH 1 /* WS_TRG7 */ +#define ARIZONA_WS_TRG6 0x0020 /* WS_TRG6 */ +#define ARIZONA_WS_TRG6_MASK 0x0020 /* WS_TRG6 */ +#define ARIZONA_WS_TRG6_SHIFT 5 /* WS_TRG6 */ +#define ARIZONA_WS_TRG6_WIDTH 1 /* WS_TRG6 */ +#define ARIZONA_WS_TRG5 0x0010 /* WS_TRG5 */ +#define ARIZONA_WS_TRG5_MASK 0x0010 /* WS_TRG5 */ +#define ARIZONA_WS_TRG5_SHIFT 4 /* WS_TRG5 */ +#define ARIZONA_WS_TRG5_WIDTH 1 /* WS_TRG5 */ +#define ARIZONA_WS_TRG4 0x0008 /* WS_TRG4 */ +#define ARIZONA_WS_TRG4_MASK 0x0008 /* WS_TRG4 */ +#define ARIZONA_WS_TRG4_SHIFT 3 /* WS_TRG4 */ +#define ARIZONA_WS_TRG4_WIDTH 1 /* WS_TRG4 */ +#define ARIZONA_WS_TRG3 0x0004 /* WS_TRG3 */ +#define ARIZONA_WS_TRG3_MASK 0x0004 /* WS_TRG3 */ +#define ARIZONA_WS_TRG3_SHIFT 2 /* WS_TRG3 */ +#define ARIZONA_WS_TRG3_WIDTH 1 /* WS_TRG3 */ +#define ARIZONA_WS_TRG2 0x0002 /* WS_TRG2 */ +#define ARIZONA_WS_TRG2_MASK 0x0002 /* WS_TRG2 */ +#define ARIZONA_WS_TRG2_SHIFT 1 /* WS_TRG2 */ +#define ARIZONA_WS_TRG2_WIDTH 1 /* WS_TRG2 */ +#define ARIZONA_WS_TRG1 0x0001 /* WS_TRG1 */ +#define ARIZONA_WS_TRG1_MASK 0x0001 /* WS_TRG1 */ +#define ARIZONA_WS_TRG1_SHIFT 0 /* WS_TRG1 */ +#define ARIZONA_WS_TRG1_WIDTH 1 /* WS_TRG1 */ + +/* * R97 (0x61) - Sample Rate Sequence Select 1 */ #define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR_MASK 0x01FF /* WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR - [8:0] */ -- 1.7.2.5

3 6

[alsa-devel] [PATCH v3 1/3] mfd: wm5110: Add registers for custom write sequence triggers
by Charles Keepax 08 Jul '15

08 Jul '15

This register will be needed as part of some additional support for the headphone path on wm5110, so this patch adds the register and sets up its regmap config. Signed-off-by: Charles Keepax <ckeepax(a)opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones(a)linaro.org> --- drivers/mfd/wm5110-tables.c | 2 + include/linux/mfd/arizona/registers.h | 37 +++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 0 deletions(-) diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c index 12cad94..62a4aa1 100644 --- a/drivers/mfd/wm5110-tables.c +++ b/drivers/mfd/wm5110-tables.c @@ -676,6 +676,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000032, 0x0100 }, /* R50 - PWM Drive 3 */ { 0x00000040, 0x0000 }, /* R64 - Wake control */ { 0x00000041, 0x0000 }, /* R65 - Sequence control */ + { 0x00000042, 0x0000 }, /* R66 - Spare Triggers */ { 0x00000061, 0x01FF }, /* R97 - Sample Rate Sequence Select 1 */ { 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */ { 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */ @@ -1716,6 +1717,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg) case ARIZONA_PWM_DRIVE_3: case ARIZONA_WAKE_CONTROL: case ARIZONA_SEQUENCE_CONTROL: + case ARIZONA_SPARE_TRIGGERS: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2: case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3: diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 3499d36..11affb3 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -39,6 +39,7 @@ #define ARIZONA_PWM_DRIVE_3 0x32 #define ARIZONA_WAKE_CONTROL 0x40 #define ARIZONA_SEQUENCE_CONTROL 0x41 +#define ARIZONA_SPARE_TRIGGERS 0x42 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_1 0x61 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2 0x62 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3 0x63 @@ -1431,6 +1432,42 @@ #define ARIZONA_WSEQ_ENA_JD2_RISE_WIDTH 1 /* WSEQ_ENA_JD2_RISE */ /* + * R66 (0x42) - Spare Triggers + */ +#define ARIZONA_WS_TRG8 0x0080 /* WS_TRG8 */ +#define ARIZONA_WS_TRG8_MASK 0x0080 /* WS_TRG8 */ +#define ARIZONA_WS_TRG8_SHIFT 7 /* WS_TRG8 */ +#define ARIZONA_WS_TRG8_WIDTH 1 /* WS_TRG8 */ +#define ARIZONA_WS_TRG7 0x0040 /* WS_TRG7 */ +#define ARIZONA_WS_TRG7_MASK 0x0040 /* WS_TRG7 */ +#define ARIZONA_WS_TRG7_SHIFT 6 /* WS_TRG7 */ +#define ARIZONA_WS_TRG7_WIDTH 1 /* WS_TRG7 */ +#define ARIZONA_WS_TRG6 0x0020 /* WS_TRG6 */ +#define ARIZONA_WS_TRG6_MASK 0x0020 /* WS_TRG6 */ +#define ARIZONA_WS_TRG6_SHIFT 5 /* WS_TRG6 */ +#define ARIZONA_WS_TRG6_WIDTH 1 /* WS_TRG6 */ +#define ARIZONA_WS_TRG5 0x0010 /* WS_TRG5 */ +#define ARIZONA_WS_TRG5_MASK 0x0010 /* WS_TRG5 */ +#define ARIZONA_WS_TRG5_SHIFT 4 /* WS_TRG5 */ +#define ARIZONA_WS_TRG5_WIDTH 1 /* WS_TRG5 */ +#define ARIZONA_WS_TRG4 0x0008 /* WS_TRG4 */ +#define ARIZONA_WS_TRG4_MASK 0x0008 /* WS_TRG4 */ +#define ARIZONA_WS_TRG4_SHIFT 3 /* WS_TRG4 */ +#define ARIZONA_WS_TRG4_WIDTH 1 /* WS_TRG4 */ +#define ARIZONA_WS_TRG3 0x0004 /* WS_TRG3 */ +#define ARIZONA_WS_TRG3_MASK 0x0004 /* WS_TRG3 */ +#define ARIZONA_WS_TRG3_SHIFT 2 /* WS_TRG3 */ +#define ARIZONA_WS_TRG3_WIDTH 1 /* WS_TRG3 */ +#define ARIZONA_WS_TRG2 0x0002 /* WS_TRG2 */ +#define ARIZONA_WS_TRG2_MASK 0x0002 /* WS_TRG2 */ +#define ARIZONA_WS_TRG2_SHIFT 1 /* WS_TRG2 */ +#define ARIZONA_WS_TRG2_WIDTH 1 /* WS_TRG2 */ +#define ARIZONA_WS_TRG1 0x0001 /* WS_TRG1 */ +#define ARIZONA_WS_TRG1_MASK 0x0001 /* WS_TRG1 */ +#define ARIZONA_WS_TRG1_SHIFT 0 /* WS_TRG1 */ +#define ARIZONA_WS_TRG1_WIDTH 1 /* WS_TRG1 */ + +/* * R97 (0x61) - Sample Rate Sequence Select 1 */ #define ARIZONA_WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR_MASK 0x01FF /* WSEQ_SAMPLE_RATE_DETECT_A_SEQ_ADDR - [8:0] */ -- 1.7.2.5

3 4

[alsa-devel] [PATCH 1/2] ASoC: Prevent components from being bound to multiple cards
by Lars-Peter Clausen 08 Jul '15

08 Jul '15

A component can only be bound to a single card at a time. Binding it to card while it is already bound to another will result in undefined behavior. As the undefined behavior might only manifest itself later on it is not necessarily always straight forward to find the cause. To prevent this add a check that refuses to bind a component to multiple cards as well as prints a error describing the problem. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/soc-core.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 8baf87d..d9ae826 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1104,9 +1104,19 @@ static int soc_probe_component(struct snd_soc_card *card, struct snd_soc_dai *dai; int ret; - if (!strcmp(component->name, "snd-soc-dummy") || component->probed) + if (!strcmp(component->name, "snd-soc-dummy")) return 0; + if (component->probed) { + if (component->card != card) { + dev_err(component->dev, + "Trying to bind component to card \"%s\" but is already bound to card \"%s\"\n", + card->name, component->card->name); + return -ENODEV; + } + return 0; + } + component->card = card; dapm->card = card; soc_set_name_prefix(card, component); -- 2.1.4

2 4

[alsa-devel] Getting stable PCM device id
by Alexandre Bique 08 Jul '15

08 Jul '15

Hi, I wonder how to get a PCM identifier that would be stable if you reboot or plug/unplug sound cards in a random order. I want to be able to store a sound card configuration and be able to restore it without relying on the card index or the device name, because if you have two times the same sound card it is not going to be unique. I'm not an expert in hardware ids, yet I imagine that we could use the hardware serial number or equivalent? Thank you very much, -- Alexandre Bique

2 2

[alsa-devel] [PATCH v2] ASoC: wm8960: update pll and clock setting function
by Zidan Wang 08 Jul '15

08 Jul '15

Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. TX and RX share the same sysclk and bclk divider register, and have different DAC/ADC divier register. When playback and capture simultaneously, the second stream should not set pll, should not change the sysclk and bclk, just need set DAC/ADC divider to support different TX and RX sample rate. Signed-off-by: Zidan Wang <zidan.wang(a)freescale.com> --- sound/soc/codecs/wm8960.c | 256 ++++++++++++++++++++++++++++++++++++++-------- sound/soc/codecs/wm8960.h | 1 + 2 files changed, 214 insertions(+), 43 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 94c5c46..e170bdf 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -48,6 +48,9 @@ #define WM8960_DISOP 0x40 #define WM8960_DRES_MASK 0x30 +static bool is_pll_freq_available(unsigned int source, unsigned int target); +static int wm8960_set_pll(struct snd_soc_dai *codec_dai, + unsigned int freq_in, unsigned int freq_out); /* * wm8960 register cache * We can't read the WM8960 register space when we are @@ -126,9 +129,12 @@ struct wm8960_priv { struct snd_soc_dapm_widget *rout1; struct snd_soc_dapm_widget *out3; bool deemph; - int playback_fs; - int bclk; int sysclk; + int clk_id; + int freq_in; + int fs[2]; + int dac_div[2]; + bool is_stream_in_use[2]; struct wm8960_data pdata; }; @@ -164,8 +170,8 @@ static int wm8960_set_deemph(struct snd_soc_codec *codec) if (wm8960->deemph) { best = 1; for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { - if (abs(deemph_settings[i] - wm8960->playback_fs) < - abs(deemph_settings[best] - wm8960->playback_fs)) + if (abs(deemph_settings[i] - wm8960->fs[1]) < + abs(deemph_settings[best] - wm8960->fs[1])) best = i; } @@ -565,6 +571,9 @@ static struct { { 8000, 5 }, }; +/* -1 for reserved value */ +static const int sysclk_divs[] = { 1, -1, 2, -1 }; + /* Multiply 256 for internal 256 div */ static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 }; @@ -574,61 +583,166 @@ static const int bclk_divs[] = { 120, 160, 220, 240, 320, 320, 320 }; -static void wm8960_configure_clocking(struct snd_soc_codec *codec, - bool tx, int lrclk) +static int wm8960_configure_clocking(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { + struct snd_soc_codec *codec = dai->codec; struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + unsigned int sample_rate = params_rate(params); + unsigned int channels = params_channels(params); + unsigned int sysclk, bclk, freq_out, freq_in; + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; u16 iface1 = snd_soc_read(codec, WM8960_IFACE1); u16 iface2 = snd_soc_read(codec, WM8960_IFACE2); - u32 sysclk; - int i, j; + int i, j, k; if (!(iface1 & (1<<6))) { dev_dbg(codec->dev, "Codec is slave mode, no need to configure clock\n"); - return; + return 0; + } + + /* + * playback and capture using the same registers of bclk and sysclk + * div, and different registers for dac/adc div. If playback and capture + * simultaneously, the second should not set pll, should not change + * the sysclk and bclk, only dac/adc div can be set to support different + * frame clock. + */ + if (wm8960->is_stream_in_use[!tx]) { + /* + * If ADCLRC configure as GPIO pin, DACLRC pin is used as a + * frame clock for ADCs and DACs. + */ + if (iface2 & (1 << 6)) { + snd_soc_update_bits(codec, WM8960_CLOCK1, + 0x7 << 3, wm8960->dac_div[!tx] << 3); + return 0; + } + + /* + * If the different TX and RX sample rate can be support, + * setting corresponding DAC or ADC divider. + */ + for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) { + if (wm8960->fs[!tx] * dac_divs[wm8960->dac_div[!tx]] + == wm8960->fs[tx] * dac_divs[i]) { + if (tx) + snd_soc_update_bits(codec, + WM8960_CLOCK1, + 0x7 << 3, dac_divs[i] << 3); + else + snd_soc_update_bits(codec, + WM8960_CLOCK1, + 0x7 << 6, dac_divs[i] << 6); + wm8960->dac_div[tx] = dac_divs[i]; + return 0; + } + } + if (i == ARRAY_SIZE(dac_divs)) { + dev_err(codec->dev, + "can't support TX=%d RX=%d\n simultaneously", + wm8960->fs[1], wm8960->fs[0]); + return -EINVAL; + } + } + + if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) { + dev_err(codec->dev, "No MCLK configured\n"); + return -EINVAL; } - if (!wm8960->sysclk) { - dev_dbg(codec->dev, "No SYSCLK configured\n"); - return; + freq_in = wm8960->freq_in; + + bclk = snd_soc_params_to_bclk(params); + if (channels == 1) + bclk *= 2; + + /* + * If it's sysclk auto mode, check if the MCLK can provide sysclk or + * not. If MCLK can provide sysclk, using MCLK to provide sysclk + * directly. Otherwise, auto select a available pll out frequency + * and set PLL. + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO) { + /* disable the PLL and using MCLK to provide sysclk */ + wm8960_set_pll(dai, 0, 0); + freq_out = freq_in; + } else if (wm8960->sysclk) + freq_out = wm8960->sysclk; + else { + dev_err(codec->dev, "No SYSCLK configured\n"); + return -EINVAL; } - if (!wm8960->bclk || !lrclk) { - dev_dbg(codec->dev, "No audio clocks configured\n"); - return; + /* check if the sysclk frequency is available. */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + sysclk = freq_out / sysclk_divs[i]; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + if (sysclk == dac_divs[j] * sample_rate) { + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) + if (sysclk == bclk * bclk_divs[k] / 10) + break; + if (k != ARRAY_SIZE(bclk_divs)) + break; + } + } + if (j != ARRAY_SIZE(dac_divs)) + break; } - for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) { - if (wm8960->sysclk == lrclk * dac_divs[i]) { - for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) { - sysclk = wm8960->bclk * bclk_divs[j] / 10; - if (wm8960->sysclk == sysclk) + if (i != ARRAY_SIZE(sysclk_divs)) + goto configure_clock; + else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; + } + /* get a available pll out frequency and set pll */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + sysclk = sample_rate * dac_divs[j]; + freq_out = sysclk * sysclk_divs[i]; + + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) { + if (sysclk == bclk * bclk_divs[k] / 10 && + is_pll_freq_available(freq_in, freq_out)) { + wm8960_set_pll(dai, freq_in, freq_out); break; + } else + continue; } - if(j != ARRAY_SIZE(bclk_divs)) + if (k != ARRAY_SIZE(bclk_divs)) break; } + if (j != ARRAY_SIZE(dac_divs)) + break; } - if (i == ARRAY_SIZE(dac_divs)) { - dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk); - return; + if (i == ARRAY_SIZE(sysclk_divs)) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; } - /* - * configure frame clock. If ADCLRC configure as GPIO pin, DACLRC - * pin is used as a frame clock for ADCs and DACs. - */ - if (iface2 & (1<<6)) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); +configure_clock: + snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1); + + if (iface2 & (1 << 6)) + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3); else if (tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3); else if (!tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, i << 6); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6); /* configure bit clock */ - snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, j); + snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k); + + wm8960->dac_div[tx] = j; + + return 0; } static int wm8960_hw_params(struct snd_pcm_substream *substream, @@ -641,10 +755,6 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; int i; - wm8960->bclk = snd_soc_params_to_bclk(params); - if (params_channels(params) == 1) - wm8960->bclk *= 2; - /* bit size */ switch (params_width(params)) { case 16: @@ -667,11 +777,11 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } + wm8960->fs[tx] = params_rate(params); /* Update filters for the new rate */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - wm8960->playback_fs = params_rate(params); + if (tx) wm8960_set_deemph(codec); - } else { + else { for (i = 0; i < ARRAY_SIZE(alc_rates); i++) if (alc_rates[i].rate == params_rate(params)) snd_soc_update_bits(codec, @@ -682,7 +792,27 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, /* set iface */ snd_soc_write(codec, WM8960_IFACE1, iface); - wm8960_configure_clocking(codec, tx, params_rate(params)); + wm8960->is_stream_in_use[tx] = true; + + return wm8960_configure_clocking(substream, params, dai); +} + +static int wm8960_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 clock1 = snd_soc_read(codec, WM8960_CLOCK1); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + + wm8960->is_stream_in_use[tx] = false; + /* + * If it's sysclk auto mode, no stream in use, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (clock1 & 0x1) && + !wm8960->is_stream_in_use[!tx]) + wm8960_set_pll(dai, 0, 0); return 0; } @@ -892,6 +1022,28 @@ struct _pll_div { u32 k:24; }; +static bool is_pll_freq_available(unsigned int source, unsigned int target) +{ + unsigned int Ndiv; + + if (source == 0 || target == 0) + return false; + + /* Scale up target to PLL operating frequency */ + target *= 4; + Ndiv = target / source; + + if (Ndiv < 6) { + source >>= 1; + Ndiv = target / source; + } + + if ((Ndiv < 6) || (Ndiv > 12)) + return false; + + return true; +} + /* The size in bits of the pll divide multiplied by 10 * to allow rounding later */ #define FIXED_PLL_SIZE ((1 << 24) * 10) @@ -943,8 +1095,8 @@ static int pll_factors(unsigned int source, unsigned int target, return 0; } -static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, - int source, unsigned int freq_in, unsigned int freq_out) +static int wm8960_set_pll(struct snd_soc_dai *codec_dai, + unsigned int freq_in, unsigned int freq_out) { struct snd_soc_codec *codec = codec_dai->codec; u16 reg; @@ -986,6 +1138,20 @@ static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, return 0; } +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->freq_in = freq_in; + + if (wm8960->clk_id == WM8960_SYSCLK_AUTO) + return 0; + + return wm8960_set_pll(codec_dai, freq_in, freq_out); +} + static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div) { @@ -1043,11 +1209,14 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, WM8960_SYSCLK_PLL); break; + case WM8960_SYSCLK_AUTO: + break; default: return -EINVAL; } wm8960->sysclk = freq; + wm8960->clk_id = clk_id; return 0; } @@ -1060,6 +1229,7 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, static const struct snd_soc_dai_ops wm8960_dai_ops = { .hw_params = wm8960_hw_params, + .hw_free = wm8960_hw_free, .digital_mute = wm8960_mute, .set_fmt = wm8960_set_dai_fmt, .set_clkdiv = wm8960_set_dai_clkdiv, diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h index 2d8163d..ab3220d 100644 --- a/sound/soc/codecs/wm8960.h +++ b/sound/soc/codecs/wm8960.h @@ -82,6 +82,7 @@ #define WM8960_SYSCLK_MCLK (0 << 0) #define WM8960_SYSCLK_PLL (1 << 0) +#define WM8960_SYSCLK_AUTO (2 << 0) #define WM8960_DAC_DIV_1 (0 << 3) #define WM8960_DAC_DIV_1_5 (1 << 3) -- 1.9.1

2 1

[alsa-devel] Choosing the best PCM access
by Alexandre Bique 08 Jul '15

08 Jul '15

Hi, I just ran test/pcm.c and found that MMAP_NONINTERLEAVED was faster than MMAP_INTERLEAVED in my case. My test was to run it like: ./a.out -c 2 -b 3000 -p 1500 -m direct_nointerleaved And I got a lot more crackling in interleaved than in noninterleaved. Is it something very hardware/driver dependent and if so, how to know which is the best access? Thank you, -- Alexandre Bique

1 0

[alsa-devel] [PATCH v2 01/13] topology: uapi: Add UAPI headers for topology ABI
by Liam Girdwood 08 Jul '15

08 Jul '15

Signed-off-by: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> --- include/sound/asoc.h | 387 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/sound/tlv.h | 23 +++ 2 files changed, 410 insertions(+) create mode 100644 include/sound/asoc.h create mode 100644 include/sound/tlv.h diff --git a/include/sound/asoc.h b/include/sound/asoc.h new file mode 100644 index 0000000..498cd0c --- /dev/null +++ b/include/sound/asoc.h @@ -0,0 +1,387 @@ +/* + * uapi/sound/asoc.h -- ALSA SoC Firmware Controls and DAPM + * + * Copyright (C) 2012 Texas Instruments Inc. + * Copyright (C) 2015 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simple file API to load FW that includes mixers, coefficients, DAPM graphs, + * algorithms, equalisers, DAIs, widgets etc. +*/ + +#ifndef __LINUX_UAPI_SND_ASOC_H +#define __LINUX_UAPI_SND_ASOC_H + +/* + * Maximum number of channels topology kcontrol can represent. + */ +#define SND_SOC_TPLG_MAX_CHAN 8 + +/* + * Maximum number of PCM formats capability + */ +#define SND_SOC_TPLG_MAX_FORMATS 16 + +/* + * Maximum number of PCM stream configs + */ +#define SND_SOC_TPLG_STREAM_CONFIG_MAX 8 + +/* individual kcontrol info types - can be mixed with other types */ +#define SND_SOC_TPLG_CTL_VOLSW 1 +#define SND_SOC_TPLG_CTL_VOLSW_SX 2 +#define SND_SOC_TPLG_CTL_VOLSW_XR_SX 3 +#define SND_SOC_TPLG_CTL_ENUM 4 +#define SND_SOC_TPLG_CTL_BYTES 5 +#define SND_SOC_TPLG_CTL_ENUM_VALUE 6 +#define SND_SOC_TPLG_CTL_RANGE 7 +#define SND_SOC_TPLG_CTL_STROBE 8 + + +/* individual widget kcontrol info types - can be mixed with other types */ +#define SND_SOC_TPLG_DAPM_CTL_VOLSW 64 +#define SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE 65 +#define SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT 66 +#define SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE 67 +#define SND_SOC_TPLG_DAPM_CTL_PIN 68 + +/* DAPM widget types - add new items to the end */ +#define SND_SOC_TPLG_DAPM_INPUT 0 +#define SND_SOC_TPLG_DAPM_OUTPUT 1 +#define SND_SOC_TPLG_DAPM_MUX 2 +#define SND_SOC_TPLG_DAPM_MIXER 3 +#define SND_SOC_TPLG_DAPM_PGA 4 +#define SND_SOC_TPLG_DAPM_OUT_DRV 5 +#define SND_SOC_TPLG_DAPM_ADC 6 +#define SND_SOC_TPLG_DAPM_DAC 7 +#define SND_SOC_TPLG_DAPM_SWITCH 8 +#define SND_SOC_TPLG_DAPM_PRE 9 +#define SND_SOC_TPLG_DAPM_POST 10 +#define SND_SOC_TPLG_DAPM_AIF_IN 11 +#define SND_SOC_TPLG_DAPM_AIF_OUT 12 +#define SND_SOC_TPLG_DAPM_DAI_IN 13 +#define SND_SOC_TPLG_DAPM_DAI_OUT 14 +#define SND_SOC_TPLG_DAPM_DAI_LINK 15 +#define SND_SOC_TPLG_DAPM_LAST SND_SOC_TPLG_DAPM_DAI_LINK + +/* Header magic number and string sizes */ +#define SND_SOC_TPLG_MAGIC 0x41536F43 /* ASoC */ + +/* string sizes */ +#define SND_SOC_TPLG_NUM_TEXTS 16 + +/* ABI version */ +#define SND_SOC_TPLG_ABI_VERSION 0x2 + +/* Max size of TLV data */ +#define SND_SOC_TPLG_TLV_SIZE 32 + +/* + * File and Block header data types. + * Add new generic and vendor types to end of list. + * Generic types are handled by the core whilst vendors types are passed + * to the component drivers for handling. + */ +#define SND_SOC_TPLG_TYPE_MIXER 1 +#define SND_SOC_TPLG_TYPE_BYTES 2 +#define SND_SOC_TPLG_TYPE_ENUM 3 +#define SND_SOC_TPLG_TYPE_DAPM_GRAPH 4 +#define SND_SOC_TPLG_TYPE_DAPM_WIDGET 5 +#define SND_SOC_TPLG_TYPE_DAI_LINK 6 +#define SND_SOC_TPLG_TYPE_PCM 7 +#define SND_SOC_TPLG_TYPE_MANIFEST 8 +#define SND_SOC_TPLG_TYPE_CODEC_LINK 9 +#define SND_SOC_TPLG_TYPE_MAX SND_SOC_TPLG_TYPE_CODEC_LINK + +/* vendor block IDs - please add new vendor types to end */ +#define SND_SOC_TPLG_TYPE_VENDOR_FW 1000 +#define SND_SOC_TPLG_TYPE_VENDOR_CONFIG 1001 +#define SND_SOC_TPLG_TYPE_VENDOR_COEFF 1002 +#define SND_SOC_TPLG_TYPEVENDOR_CODEC 1003 + +#define SND_SOC_TPLG_STREAM_PLAYBACK 0 +#define SND_SOC_TPLG_STREAM_CAPTURE 1 + +/* + * Block Header. + * This header precedes all object and object arrays below. + */ +struct snd_soc_tplg_hdr { + __le32 magic; /* magic number */ + __le32 abi; /* ABI version */ + __le32 version; /* optional vendor specific version details */ + __le32 type; /* SND_SOC_TPLG_TYPE_ */ + __le32 size; /* size of this structure */ + __le32 vendor_type; /* optional vendor specific type info */ + __le32 payload_size; /* data bytes, excluding this header */ + __le32 index; /* identifier for block */ + __le32 count; /* number of elements in block */ +} __attribute__((packed)); + +/* + * Private data. + * All topology objects may have private data that can be used by the driver or + * firmware. Core will ignore this data. + */ +struct snd_soc_tplg_private { + __le32 size; /* in bytes of private data */ + char data[0]; +} __attribute__((packed)); + +/* + * Kcontrol TLV data. + */ +struct snd_soc_tplg_ctl_tlv { + __le32 size; /* in bytes aligned to 4 */ + __le32 numid; /* control element numeric identification */ + __le32 count; /* number of elem in data array */ + __le32 data[SND_SOC_TPLG_TLV_SIZE]; +} __attribute__((packed)); + +/* + * Kcontrol channel data + */ +struct snd_soc_tplg_channel { + __le32 size; /* in bytes of this structure */ + __le32 reg; + __le32 shift; + __le32 id; /* ID maps to Left, Right, LFE etc */ +} __attribute__((packed)); + +/* + * Kcontrol Operations IDs + */ +struct snd_soc_tplg_kcontrol_ops_id { + __le32 get; + __le32 put; + __le32 info; +} __attribute__((packed)); + +/* + * kcontrol header + */ +struct snd_soc_tplg_ctl_hdr { + __le32 size; /* in bytes of this structure */ + __le32 type; + char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + __le32 access; + struct snd_soc_tplg_kcontrol_ops_id ops; + __le32 tlv_size; /* non zero means control has TLV data */ +} __attribute__((packed)); + +/* + * Stream Capabilities + */ +struct snd_soc_tplg_stream_caps { + __le32 size; /* in bytes of this structure */ + char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + __le64 formats[SND_SOC_TPLG_MAX_FORMATS]; /* supported formats SNDRV_PCM_FMTBIT_* */ + __le32 rates; /* supported rates SNDRV_PCM_RATE_* */ + __le32 rate_min; /* min rate */ + __le32 rate_max; /* max rate */ + __le32 channels_min; /* min channels */ + __le32 channels_max; /* max channels */ + __le32 periods_min; /* min number of periods */ + __le32 periods_max; /* max number of periods */ + __le32 period_size_min; /* min period size bytes */ + __le32 period_size_max; /* max period size bytes */ + __le32 buffer_size_min; /* min buffer size bytes */ + __le32 buffer_size_max; /* max buffer size bytes */ +} __attribute__((packed)); + +/* + * FE or BE Stream configuration supported by SW/FW + */ +struct snd_soc_tplg_stream { + __le32 size; /* in bytes of this structure */ + __le64 format; /* SNDRV_PCM_FMTBIT_* */ + __le32 rate; /* SNDRV_PCM_RATE_* */ + __le32 period_bytes; /* size of period in bytes */ + __le32 buffer_bytes; /* size of buffer in bytes */ + __le32 channels; /* channels */ + __le32 tdm_slot; /* optional BE bitmask of supported TDM slots */ + __le32 dai_fmt; /* SND_SOC_DAIFMT_ */ +} __attribute__((packed)); + +/* + * Duplex stream configuration supported by SW/FW. + */ +struct snd_soc_tplg_stream_config { + __le32 size; /* in bytes of this structure */ + char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + struct snd_soc_tplg_stream playback; + struct snd_soc_tplg_stream capture; +} __attribute__((packed)); + +/* + * Manifest. List totals for each payload type. Not used in parsing, but will + * be passed to the component driver before any other objects in order for any + * global component resource allocations. + * + * File block representation for manifest :- + * +-----------------------------------+----+ + * | struct snd_soc_tplg_hdr | 1 | + * +-----------------------------------+----+ + * | struct snd_soc_tplg_manifest | 1 | + * +-----------------------------------+----+ + */ +struct snd_soc_tplg_manifest { + __le32 size; /* in bytes of this structure */ + __le32 control_elems; /* number of control elements */ + __le32 widget_elems; /* number of widget elements */ + __le32 graph_elems; /* number of graph elements */ + __le32 dai_elems; /* number of DAI elements */ + __le32 dai_link_elems; /* number of DAI link elements */ + struct snd_soc_tplg_private priv; +} __attribute__((packed)); + +/* + * Mixer kcontrol. + * + * File block representation for mixer kcontrol :- + * +-----------------------------------+----+ + * | struct snd_soc_tplg_hdr | 1 | + * +-----------------------------------+----+ + * | struct snd_soc_tplg_mixer_control | N | + * +-----------------------------------+----+ + */ +struct snd_soc_tplg_mixer_control { + struct snd_soc_tplg_ctl_hdr hdr; + __le32 size; /* in bytes of this structure */ + __le32 min; + __le32 max; + __le32 platform_max; + __le32 invert; + __le32 num_channels; + struct snd_soc_tplg_channel channel[SND_SOC_TPLG_MAX_CHAN]; + struct snd_soc_tplg_ctl_tlv tlv; + struct snd_soc_tplg_private priv; +} __attribute__((packed)); + +/* + * Enumerated kcontrol + * + * File block representation for enum kcontrol :- + * +-----------------------------------+----+ + * | struct snd_soc_tplg_hdr | 1 | + * +-----------------------------------+----+ + * | struct snd_soc_tplg_enum_control | N | + * +-----------------------------------+----+ + */ +struct snd_soc_tplg_enum_control { + struct snd_soc_tplg_ctl_hdr hdr; + __le32 size; /* in bytes of this structure */ + __le32 num_channels; + struct snd_soc_tplg_channel channel[SND_SOC_TPLG_MAX_CHAN]; + __le32 items; + __le32 mask; + __le32 count; + char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + __le32 values[SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN / 4]; + struct snd_soc_tplg_private priv; +} __attribute__((packed)); + +/* + * Bytes kcontrol + * + * File block representation for bytes kcontrol :- + * +-----------------------------------+----+ + * | struct snd_soc_tplg_hdr | 1 | + * +-----------------------------------+----+ + * | struct snd_soc_tplg_bytes_control | N | + * +-----------------------------------+----+ + */ +struct snd_soc_tplg_bytes_control { + struct snd_soc_tplg_ctl_hdr hdr; + __le32 size; /* in bytes of this structure */ + __le32 max; + __le32 mask; + __le32 base; + __le32 num_regs; + struct snd_soc_tplg_private priv; +} __attribute__((packed)); + +/* + * DAPM Graph Element + * + * File block representation for DAPM graph elements :- + * +-------------------------------------+----+ + * | struct snd_soc_tplg_hdr | 1 | + * +-------------------------------------+----+ + * | struct snd_soc_tplg_dapm_graph_elem | N | + * +-------------------------------------+----+ + */ +struct snd_soc_tplg_dapm_graph_elem { + char sink[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + char control[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + char source[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; +} __attribute__((packed)); + +/* + * DAPM Widget. + * + * File block representation for DAPM widget :- + * +-------------------------------------+-----+ + * | struct snd_soc_tplg_hdr | 1 | + * +-------------------------------------+-----+ + * | struct snd_soc_tplg_dapm_widget | N | + * +-------------------------------------+-----+ + * | struct snd_soc_tplg_enum_control | 0|1 | + * | struct snd_soc_tplg_mixer_control | 0|N | + * +-------------------------------------+-----+ + * + * Optional enum or mixer control can be appended to the end of each widget + * in the block. + */ +struct snd_soc_tplg_dapm_widget { + __le32 size; /* in bytes of this structure */ + __le32 id; /* SND_SOC_DAPM_CTL */ + char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + char sname[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + + __le32 reg; /* negative reg = no direct dapm */ + __le32 shift; /* bits to shift */ + __le32 mask; /* non-shifted mask */ + __le32 subseq; /* sort within widget type */ + __u32 invert; /* invert the power bit */ + __u32 ignore_suspend; /* kept enabled over suspend */ + __u16 event_flags; + __u16 event_type; + __u16 num_kcontrols; + struct snd_soc_tplg_private priv; + /* + * kcontrols that relate to this widget + * follow here after widget private data + */ +} __attribute__((packed)); + +struct snd_soc_tplg_pcm_cfg_caps { + struct snd_soc_tplg_stream_caps caps; + struct snd_soc_tplg_stream_config configs[SND_SOC_TPLG_STREAM_CONFIG_MAX]; + __le32 num_configs; /* number of configs */ +} __attribute__((packed)); + +/* + * Describes SW/FW specific features of PCM or DAI link. + * + * File block representation for PCM/DAI-Link :- + * +-----------------------------------+-----+ + * | struct snd_soc_tplg_hdr | 1 | + * +-----------------------------------+-----+ + * | struct snd_soc_tplg_dapm_pcm_dai | N | + * +-----------------------------------+-----+ + */ +struct snd_soc_tplg_pcm_dai { + __le32 size; /* in bytes of this structure */ + char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + __le32 id; /* unique ID - used to match */ + __le32 playback; /* supports playback mode */ + __le32 capture; /* supports capture mode */ + __le32 compress; /* 1 = compressed; 0 = PCM */ + struct snd_soc_tplg_pcm_cfg_caps capconf[2]; /* capabilities and configs */ +} __attribute__((packed)); + +#endif diff --git a/include/sound/tlv.h b/include/sound/tlv.h new file mode 100644 index 0000000..33d747d --- /dev/null +++ b/include/sound/tlv.h @@ -0,0 +1,23 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __UAPI_SOUND_TLV_H +#define __UAPI_SOUND_TLV_H + +#define SNDRV_CTL_TLVT_CONTAINER 0 /* one level down - group of TLVs */ +#define SNDRV_CTL_TLVT_DB_SCALE 1 /* dB scale */ +#define SNDRV_CTL_TLVT_DB_LINEAR 2 /* linear volume */ +#define SNDRV_CTL_TLVT_DB_RANGE 3 /* dB range container */ +#define SNDRV_CTL_TLVT_DB_MINMAX 4 /* dB scale with min/max */ +#define SNDRV_CTL_TLVT_DB_MINMAX_MUTE 5 /* dB scale with min/max with mute */ + +#endif -- 2.1.4

3 25

[alsa-devel] [PATCH] regmap: Use different lockdep class for each regmap init call
by Nicolas Boichat 08 Jul '15

08 Jul '15

Lockdep validator complains about recursive locking and deadlock when two different regmap instances are called in a nested order. That happens anytime a regmap read/write call needs to access another regmap. This is because, for performance reason, lockdep groups all locks initialized by the same mutex_init() in the same lock class. Therefore all regmap mutexes are in the same lock class, leading to lockdep "nested locking" warnings if a regmap accesses another regmap. In general, it is impossible to establish in advance the hierarchy of regmaps, so we make sure that each regmap init call initializes its own static lock_class_key. This is done by wrapping all regmap_init calls into macros. This also allows us to give meaningful names to the lock_class_key. For example, in rt5677 case, we have in /proc/lockdep_chains: irq_context: 0 [ffffffc0018d2198] &dev->mutex [ffffffc0018d2198] &dev->mutex [ffffffc001bd7f60] rt5677:5104:(&rt5677_regmap)->_lock [ffffffc001bd7f58] rt5677:5096:(&rt5677_regmap_physical)->_lock [ffffffc001b95448] &(&base->lock)->rlock The above would have resulted in a lockdep recursive warning previously. This is not the case anymore as the lockdep validator now clearly identifies the 2 regmaps as separate. Signed-off-by: Nicolas Boichat <drinkcat(a)chromium.org> --- Following up on the discussion here: http://mailman.alsa-project.org/pipermail/alsa-devel/2015-June/094124.html , and Lars-Peter's idea on how to define the macros, this converts all regmap_init calls to macros. One thing that is left over is the documentation. As it stands, regmap_init is documented just before __regmap_init definition in drivers/base/regmap.c (this also applies to all other regmap_init functions...). We do not want to document the lock_key/name parameters, so we could either leave it like that, or move all the documentation to regmap.h, in front of the respective macros. Thanks! drivers/base/regmap/regmap-ac97.c | 22 +++-- drivers/base/regmap/regmap-i2c.c | 22 +++-- drivers/base/regmap/regmap-mmio.c | 27 ++++-- drivers/base/regmap/regmap-spi.c | 22 +++-- drivers/base/regmap/regmap-spmi.c | 44 +++++---- drivers/base/regmap/regmap.c | 31 ++++--- include/linux/regmap.h | 190 ++++++++++++++++++++++++++++---------- 7 files changed, 248 insertions(+), 110 deletions(-) diff --git a/drivers/base/regmap/regmap-ac97.c b/drivers/base/regmap/regmap-ac97.c index 8d304e2..aa631be 100644 --- a/drivers/base/regmap/regmap-ac97.c +++ b/drivers/base/regmap/regmap-ac97.c @@ -87,12 +87,15 @@ static const struct regmap_bus ac97_regmap_bus = { * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -struct regmap *regmap_init_ac97(struct snd_ac97 *ac97, - const struct regmap_config *config) +struct regmap *__regmap_init_ac97(struct snd_ac97 *ac97, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config); + return __regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(regmap_init_ac97); +EXPORT_SYMBOL_GPL(__regmap_init_ac97); /** * devm_regmap_init_ac97(): Initialise AC'97 register map @@ -104,11 +107,14 @@ EXPORT_SYMBOL_GPL(regmap_init_ac97); * to a struct regmap. The regmap will be automatically freed by the * device management code. */ -struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97, - const struct regmap_config *config) +struct regmap *__devm_regmap_init_ac97(struct snd_ac97 *ac97, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return devm_regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config); + return __devm_regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(devm_regmap_init_ac97); +EXPORT_SYMBOL_GPL(__devm_regmap_init_ac97); MODULE_LICENSE("GPL v2"); diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c index 4b76e33..3163b22 100644 --- a/drivers/base/regmap/regmap-i2c.c +++ b/drivers/base/regmap/regmap-i2c.c @@ -242,17 +242,20 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c, * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -struct regmap *regmap_init_i2c(struct i2c_client *i2c, - const struct regmap_config *config) +struct regmap *__regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { const struct regmap_bus *bus = regmap_get_i2c_bus(i2c, config); if (IS_ERR(bus)) return ERR_CAST(bus); - return regmap_init(&i2c->dev, bus, &i2c->dev, config); + return __regmap_init(&i2c->dev, bus, &i2c->dev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(regmap_init_i2c); +EXPORT_SYMBOL_GPL(__regmap_init_i2c); /** * devm_regmap_init_i2c(): Initialise managed register map @@ -264,16 +267,19 @@ EXPORT_SYMBOL_GPL(regmap_init_i2c); * to a struct regmap. The regmap will be automatically freed by the * device management code. */ -struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c, - const struct regmap_config *config) +struct regmap *__devm_regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { const struct regmap_bus *bus = regmap_get_i2c_bus(i2c, config); if (IS_ERR(bus)) return ERR_CAST(bus); - return devm_regmap_init(&i2c->dev, bus, &i2c->dev, config); + return __devm_regmap_init(&i2c->dev, bus, &i2c->dev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(devm_regmap_init_i2c); +EXPORT_SYMBOL_GPL(__devm_regmap_init_i2c); MODULE_LICENSE("GPL"); diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c index 04a329a..a1b2b27 100644 --- a/drivers/base/regmap/regmap-mmio.c +++ b/drivers/base/regmap/regmap-mmio.c @@ -307,9 +307,11 @@ err_free: * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id, - void __iomem *regs, - const struct regmap_config *config) +struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id, + void __iomem *regs, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { struct regmap_mmio_context *ctx; @@ -317,9 +319,10 @@ struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id, if (IS_ERR(ctx)) return ERR_CAST(ctx); - return regmap_init(dev, &regmap_mmio, ctx, config); + return __regmap_init(dev, &regmap_mmio, ctx, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(regmap_init_mmio_clk); +EXPORT_SYMBOL_GPL(__regmap_init_mmio_clk); /** * devm_regmap_init_mmio_clk(): Initialise managed register map with clock @@ -333,9 +336,12 @@ EXPORT_SYMBOL_GPL(regmap_init_mmio_clk); * to a struct regmap. The regmap will be automatically freed by the * device management code. */ -struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id, - void __iomem *regs, - const struct regmap_config *config) +struct regmap *__devm_regmap_init_mmio_clk(struct device *dev, + const char *clk_id, + void __iomem *regs, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { struct regmap_mmio_context *ctx; @@ -343,8 +349,9 @@ struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id, if (IS_ERR(ctx)) return ERR_CAST(ctx); - return devm_regmap_init(dev, &regmap_mmio, ctx, config); + return __devm_regmap_init(dev, &regmap_mmio, ctx, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(devm_regmap_init_mmio_clk); +EXPORT_SYMBOL_GPL(__devm_regmap_init_mmio_clk); MODULE_LICENSE("GPL v2"); diff --git a/drivers/base/regmap/regmap-spi.c b/drivers/base/regmap/regmap-spi.c index 53d1148..4c7850d 100644 --- a/drivers/base/regmap/regmap-spi.c +++ b/drivers/base/regmap/regmap-spi.c @@ -122,12 +122,15 @@ static struct regmap_bus regmap_spi = { * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -struct regmap *regmap_init_spi(struct spi_device *spi, - const struct regmap_config *config) +struct regmap *__regmap_init_spi(struct spi_device *spi, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return regmap_init(&spi->dev, &regmap_spi, &spi->dev, config); + return __regmap_init(&spi->dev, &regmap_spi, &spi->dev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(regmap_init_spi); +EXPORT_SYMBOL_GPL(__regmap_init_spi); /** * devm_regmap_init_spi(): Initialise register map @@ -139,11 +142,14 @@ EXPORT_SYMBOL_GPL(regmap_init_spi); * to a struct regmap. The map will be automatically freed by the * device management code. */ -struct regmap *devm_regmap_init_spi(struct spi_device *spi, - const struct regmap_config *config) +struct regmap *__devm_regmap_init_spi(struct spi_device *spi, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return devm_regmap_init(&spi->dev, &regmap_spi, &spi->dev, config); + return __devm_regmap_init(&spi->dev, &regmap_spi, &spi->dev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(devm_regmap_init_spi); +EXPORT_SYMBOL_GPL(__devm_regmap_init_spi); MODULE_LICENSE("GPL"); diff --git a/drivers/base/regmap/regmap-spmi.c b/drivers/base/regmap/regmap-spmi.c index d7026dc..7f50f58 100644 --- a/drivers/base/regmap/regmap-spmi.c +++ b/drivers/base/regmap/regmap-spmi.c @@ -99,12 +99,15 @@ static struct regmap_bus regmap_spmi_base = { * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -struct regmap *regmap_init_spmi_base(struct spmi_device *sdev, - const struct regmap_config *config) +struct regmap *__regmap_init_spmi_base(struct spmi_device *sdev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config); + return __regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(regmap_init_spmi_base); +EXPORT_SYMBOL_GPL(__regmap_init_spmi_base); /** * devm_regmap_init_spmi_base(): Create managed regmap for Base register space @@ -115,12 +118,15 @@ EXPORT_SYMBOL_GPL(regmap_init_spmi_base); * to a struct regmap. The regmap will be automatically freed by the * device management code. */ -struct regmap *devm_regmap_init_spmi_base(struct spmi_device *sdev, - const struct regmap_config *config) +struct regmap *__devm_regmap_init_spmi_base(struct spmi_device *sdev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return devm_regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config); + return __devm_regmap_init(&sdev->dev, &regmap_spmi_base, sdev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_base); +EXPORT_SYMBOL_GPL(__devm_regmap_init_spmi_base); static int regmap_spmi_ext_read(void *context, const void *reg, size_t reg_size, @@ -230,12 +236,15 @@ static struct regmap_bus regmap_spmi_ext = { * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -struct regmap *regmap_init_spmi_ext(struct spmi_device *sdev, - const struct regmap_config *config) +struct regmap *__regmap_init_spmi_ext(struct spmi_device *sdev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config); + return __regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(regmap_init_spmi_ext); +EXPORT_SYMBOL_GPL(__regmap_init_spmi_ext); /** * devm_regmap_init_spmi_ext(): Create managed regmap for Ext register space @@ -246,11 +255,14 @@ EXPORT_SYMBOL_GPL(regmap_init_spmi_ext); * to a struct regmap. The regmap will be automatically freed by the * device management code. */ -struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *sdev, - const struct regmap_config *config) +struct regmap *__devm_regmap_init_spmi_ext(struct spmi_device *sdev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { - return devm_regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config); + return __devm_regmap_init(&sdev->dev, &regmap_spmi_ext, sdev, config, + lock_key, lock_name); } -EXPORT_SYMBOL_GPL(devm_regmap_init_spmi_ext); +EXPORT_SYMBOL_GPL(__devm_regmap_init_spmi_ext); MODULE_LICENSE("GPL"); diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 7111d04..b9fddcc 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -527,10 +527,12 @@ EXPORT_SYMBOL_GPL(regmap_get_val_endian); * a struct regmap. This function should generally not be called * directly, it should be called by bus-specific init functions. */ -struct regmap *regmap_init(struct device *dev, - const struct regmap_bus *bus, - void *bus_context, - const struct regmap_config *config) +struct regmap *__regmap_init(struct device *dev, + const struct regmap_bus *bus, + void *bus_context, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { struct regmap *map; int ret = -EINVAL; @@ -556,10 +558,14 @@ struct regmap *regmap_init(struct device *dev, spin_lock_init(&map->spinlock); map->lock = regmap_lock_spinlock; map->unlock = regmap_unlock_spinlock; + lockdep_set_class_and_name(&map->spinlock, + lock_key, lock_name); } else { mutex_init(&map->mutex); map->lock = regmap_lock_mutex; map->unlock = regmap_unlock_mutex; + lockdep_set_class_and_name(&map->mutex, + lock_key, lock_name); } map->lock_arg = map; } @@ -899,7 +905,7 @@ err_map: err: return ERR_PTR(ret); } -EXPORT_SYMBOL_GPL(regmap_init); +EXPORT_SYMBOL_GPL(__regmap_init); static void devm_regmap_release(struct device *dev, void *res) { @@ -919,10 +925,12 @@ static void devm_regmap_release(struct device *dev, void *res) * directly, it should be called by bus-specific init functions. The * map will be automatically freed by the device management code. */ -struct regmap *devm_regmap_init(struct device *dev, - const struct regmap_bus *bus, - void *bus_context, - const struct regmap_config *config) +struct regmap *__devm_regmap_init(struct device *dev, + const struct regmap_bus *bus, + void *bus_context, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) { struct regmap **ptr, *regmap; @@ -930,7 +938,8 @@ struct regmap *devm_regmap_init(struct device *dev, if (!ptr) return ERR_PTR(-ENOMEM); - regmap = regmap_init(dev, bus, bus_context, config); + regmap = __regmap_init(dev, bus, bus_context, config, + lock_key, lock_name); if (!IS_ERR(regmap)) { *ptr = regmap; devres_add(dev, ptr); @@ -940,7 +949,7 @@ struct regmap *devm_regmap_init(struct device *dev, return regmap; } -EXPORT_SYMBOL_GPL(devm_regmap_init); +EXPORT_SYMBOL_GPL(__devm_regmap_init); static void regmap_field_init(struct regmap_field *rm_field, struct regmap *regmap, struct reg_field reg_field) diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 59c55ea..02b4d01 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -17,6 +17,7 @@ #include <linux/rbtree.h> #include <linux/err.h> #include <linux/bug.h> +#include <linux/lockdep.h> struct module; struct device; @@ -324,46 +325,145 @@ struct regmap_bus { enum regmap_endian val_format_endian_default; }; -struct regmap *regmap_init(struct device *dev, - const struct regmap_bus *bus, - void *bus_context, - const struct regmap_config *config); -int regmap_attach_dev(struct device *dev, struct regmap *map, - const struct regmap_config *config); -struct regmap *regmap_init_i2c(struct i2c_client *i2c, - const struct regmap_config *config); -struct regmap *regmap_init_spi(struct spi_device *dev, - const struct regmap_config *config); -struct regmap *regmap_init_spmi_base(struct spmi_device *dev, - const struct regmap_config *config); -struct regmap *regmap_init_spmi_ext(struct spmi_device *dev, - const struct regmap_config *config); -struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id, - void __iomem *regs, - const struct regmap_config *config); -struct regmap *regmap_init_ac97(struct snd_ac97 *ac97, - const struct regmap_config *config); - -struct regmap *devm_regmap_init(struct device *dev, - const struct regmap_bus *bus, - void *bus_context, - const struct regmap_config *config); -struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c, - const struct regmap_config *config); -struct regmap *devm_regmap_init_spi(struct spi_device *dev, - const struct regmap_config *config); -struct regmap *devm_regmap_init_spmi_base(struct spmi_device *dev, - const struct regmap_config *config); -struct regmap *devm_regmap_init_spmi_ext(struct spmi_device *dev, - const struct regmap_config *config); -struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id, - void __iomem *regs, - const struct regmap_config *config); -struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97, - const struct regmap_config *config); +/* + * __regmap_init functions. + * + * These functions take a lock key and name parameter, and should not be called + * directly. Instead, use the regmap_init macros that generate a key and name + * for each call. + */ +struct regmap *__regmap_init(struct device *dev, + const struct regmap_bus *bus, + void *bus_context, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spi(struct spi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spmi_base(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spmi_ext(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id, + void __iomem *regs, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_ac97(struct snd_ac97 *ac97, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); + +struct regmap *__devm_regmap_init(struct device *dev, + const struct regmap_bus *bus, + void *bus_context, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spi(struct spi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spmi_base(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spmi_ext(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_mmio_clk(struct device *dev, + const char *clk_id, + void __iomem *regs, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_ac97(struct snd_ac97 *ac97, + const struct regmap_config *config); +/* + * Wrapper for regmap_init macros to include a unique lockdep key and name + * for each call. No-op if CONFIG_LOCKDEP is not set. + * + * @fn: Real function to call (in the form __[*_]regmap_init[_*]) + * @name: Config variable name (#config in the calling macro) + **/ +#ifdef CONFIG_LOCKDEP +#define __regmap_lockdep_wrapper(fn, name, ...) \ +( \ + ({ \ + static struct lock_class_key _key; \ + fn(__VA_ARGS__, &_key, \ + KBUILD_BASENAME ":" \ + __stringify(__LINE__) ":" \ + "(" name ")->lock"); \ + }) \ +) +#else +#define __regmap_lockdep_wrapper(fn, name, ...) fn(__VA_ARGS__, NULL, NULL) +#endif + +#define regmap_init(dev, bus, bus_context, config) \ + __regmap_lockdep_wrapper(__regmap_init, #config, \ + dev, bus, bus_context, config) +int regmap_attach_dev(struct device *dev, struct regmap *map, + const struct regmap_config *config); +#define regmap_init_i2c(i2c, config) \ + __regmap_lockdep_wrapper(__regmap_init_i2c, #config, \ + i2c, config) +#define regmap_init_spi(dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_spi, #config, \ + dev, config) +#define regmap_init_spmi_base(dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_spmi_base, #config, \ + dev, config) +#define regmap_init_spmi_ext(dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_spmi_ext, #config, \ + dev, config) +#define regmap_init_mmio_clk(dev, clk_id, regs, config) \ + __regmap_lockdep_wrapper(__regmap_init_mmio_clk, #config, \ + dev, clk_id, regs, config) +#define regmap_init_ac97(ac97, config) \ + __regmap_lockdep_wrapper(__regmap_init_ac97, #config, \ + ac97, config) bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); +#define devm_regmap_init(dev, bus, bus_context, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init, #config, \ + dev, bus, bus_context, config) +#define devm_regmap_init_i2c(i2c, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_i2c, #config, \ + i2c, config) +#define devm_regmap_init_spi(dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spi, #config, \ + dev, config) +#define devm_regmap_init_spmi_base(dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spmi_base, #config, \ + dev, config) +#define devm_regmap_init_spmi_ext(dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spmi_ext, #config, \ + dev, config) +#define devm_regmap_init_mmio_clk(dev, clk_id, regs, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_mmio_clk, #config, \ + dev, clk_id, regs, config) +#define devm_regmap_init_ac97(ac97, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_ac97, #config, \ + ac97, config) + /** * regmap_init_mmio(): Initialise register map * @@ -374,12 +474,8 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -static inline struct regmap *regmap_init_mmio(struct device *dev, - void __iomem *regs, - const struct regmap_config *config) -{ - return regmap_init_mmio_clk(dev, NULL, regs, config); -} +#define regmap_init_mmio(dev, regs, config) \ + regmap_init_mmio_clk(dev, NULL, regs, config) /** * devm_regmap_init_mmio(): Initialise managed register map @@ -392,12 +488,8 @@ static inline struct regmap *regmap_init_mmio(struct device *dev, * to a struct regmap. The regmap will be automatically freed by the * device management code. */ -static inline struct regmap *devm_regmap_init_mmio(struct device *dev, - void __iomem *regs, - const struct regmap_config *config) -{ - return devm_regmap_init_mmio_clk(dev, NULL, regs, config); -} +#define devm_regmap_init_mmio(dev, regs, config) \ + devm_regmap_init_mmio_clk(dev, NULL, regs, config) void regmap_exit(struct regmap *map); int regmap_reinit_cache(struct regmap *map, -- 2.4.3.573.g4eafbef

2 3