March 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: cx20442: remove incorerct __exit markups
by Dmitry Torokhov 09 Mar '15

09 Mar '15

Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> --- sound/soc/codecs/cx20442.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index 0b10979..0f334bc 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -420,7 +420,7 @@ static int cx20442_platform_probe(struct platform_device *pdev) &cx20442_codec_dev, &cx20442_dai, 1); } -static int __exit cx20442_platform_remove(struct platform_device *pdev) +static int cx20442_platform_remove(struct platform_device *pdev) { snd_soc_unregister_codec(&pdev->dev); return 0; @@ -431,7 +431,7 @@ static struct platform_driver cx20442_platform_driver = { .name = "cx20442-codec", }, .probe = cx20442_platform_probe, - .remove = __exit_p(cx20442_platform_remove), + .remove = cx20442_platform_remove, }; module_platform_driver(cx20442_platform_driver); -- 2.2.0.rc0.207.ga3a616c -- Dmitry

1 0

[alsa-devel] [PATCH 1/2] ASoC: rt5670: Revert Keep sysclk on patch
by Bard Liao 09 Mar '15

09 Mar '15

The "Keep sysclk on if JD func is used" patch force enable/disable pin in rt5670_set_dai_sysclk. But some machine driver call it in dapm widget event. It will cause kernel crash. Signed-off-by: Bard Liao <bardliao(a)realtek.com> --- sound/soc/codecs/rt5670.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 592f961..32cd266 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -2273,13 +2273,6 @@ static int rt5670_set_dai_sysclk(struct snd_soc_dai *dai, if (freq == rt5670->sysclk && clk_id == rt5670->sysclk_src) return 0; - if (rt5670->pdata.jd_mode) { - if (clk_id == RT5670_SCLK_S_PLL1) - snd_soc_dapm_force_enable_pin(&codec->dapm, "PLL1"); - else - snd_soc_dapm_disable_pin(&codec->dapm, "PLL1"); - snd_soc_dapm_sync(&codec->dapm); - } switch (clk_id) { case RT5670_SCLK_S_MCLK: reg_val |= RT5670_SCLK_SRC_MCLK; @@ -2724,10 +2717,6 @@ static int rt5670_i2c_probe(struct i2c_client *i2c, } if (rt5670->pdata.jd_mode) { - regmap_update_bits(rt5670->regmap, RT5670_GLB_CLK, - RT5670_SCLK_SRC_MASK, RT5670_SCLK_SRC_RCCLK); - rt5670->sysclk = 0; - rt5670->sysclk_src = RT5670_SCLK_S_RCCLK; regmap_update_bits(rt5670->regmap, RT5670_PWR_ANLG1, RT5670_PWR_MB, RT5670_PWR_MB); regmap_update_bits(rt5670->regmap, RT5670_PWR_ANLG2, -- 1.8.1.1.439.g50a6b54

2 6

[alsa-devel] [PATCH_V3] ASoC: jz4740: Add jz4780 support
by Zubair Lutfullah Kakakhel 09 Mar '15

09 Mar '15

The jz4780 and jz4740 have very similar i2s blocks. The slight difference is in Rx/Tx fifos. And the bitclocks for input/output are different. This patch adds jz4780 support to the driver Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel(a)imgtec.com> --- Patch based on 4.0-rc3 Tested on the MIPS Creator CI20. V2 -> V3 Added struct snd_soc_dai_driver jz4780_i2s_dai instead of modifying bit for symmetric_rates. V1 - > V2 Removed SND_DMAENGINE_PCM_FLAG_NO_RESIDUE as it is handled by dma driver Added a check for symmetric_rates flag for jz4780 --- .../bindings/sound/ingenic,jz4740-i2s.txt | 2 +- sound/soc/jz4740/jz4740-i2s.c | 84 +++++++++++++++++++--- 2 files changed, 75 insertions(+), 11 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt index b414333..b623d50 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt +++ b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt @@ -1,7 +1,7 @@ Ingenic JZ4740 I2S controller Required properties: -- compatible : "ingenic,jz4740-i2s" +- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s" - reg : I2S registers location and length - clocks : AIC and I2S PLL clock specifiers. - clock-names: "aic" and "i2s" diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c index 07f7781..b05fb1c 100644 --- a/sound/soc/jz4740/jz4740-i2s.c +++ b/sound/soc/jz4740/jz4740-i2s.c @@ -58,6 +58,12 @@ #define JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 12 #define JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 8 +#define JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 24 +#define JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 16 +#define JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_MASK \ + (0xf << JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) +#define JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_MASK \ + (0x1f << JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) #define JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE_MASK (0x7 << 19) #define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK (0x7 << 16) @@ -79,6 +85,7 @@ #define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET 16 #define JZ_AIC_I2S_FMT_DISABLE_BIT_CLK BIT(12) +#define JZ_AIC_I2S_FMT_DISABLE_BIT_ICLK BIT(13) #define JZ_AIC_I2S_FMT_ENABLE_SYS_CLK BIT(4) #define JZ_AIC_I2S_FMT_MSB BIT(0) @@ -87,6 +94,13 @@ #define JZ_AIC_CLK_DIV_MASK 0xf #define I2SDIV_DV_SHIFT 8 #define I2SDIV_DV_MASK (0xf << I2SDIV_DV_SHIFT) +#define I2SDIV_IDV_SHIFT 8 +#define I2SDIV_IDV_MASK (0xf << I2SDIV_IDV_SHIFT) + +enum jz47xx_i2s_version { + JZ_I2S_JZ4740, + JZ_I2S_JZ4780, +}; struct jz4740_i2s { struct resource *mem; @@ -98,6 +112,8 @@ struct jz4740_i2s { struct snd_dmaengine_dai_dma_data playback_dma_data; struct snd_dmaengine_dai_dma_data capture_dma_data; + + enum jz47xx_i2s_version version; }; static inline uint32_t jz4740_i2s_read(const struct jz4740_i2s *i2s, @@ -267,13 +283,22 @@ static int jz4740_i2s_hw_params(struct snd_pcm_substream *substream, ctrl |= JZ_AIC_CTRL_MONO_TO_STEREO; else ctrl &= ~JZ_AIC_CTRL_MONO_TO_STEREO; + + div_reg &= ~I2SDIV_DV_MASK; + div_reg |= (div - 1) << I2SDIV_DV_SHIFT; } else { ctrl &= ~JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK; ctrl |= sample_size << JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET; + + if (i2s->version >= JZ_I2S_JZ4780) { + div_reg &= ~I2SDIV_IDV_MASK; + div_reg |= (div - 1) << I2SDIV_IDV_SHIFT; + } else { + div_reg &= ~I2SDIV_DV_MASK; + div_reg |= (div - 1) << I2SDIV_DV_SHIFT; + } } - div_reg &= ~I2SDIV_DV_MASK; - div_reg |= (div - 1) << I2SDIV_DV_SHIFT; jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl); jz4740_i2s_write(i2s, JZ_REG_AIC_CLK_DIV, div_reg); @@ -369,11 +394,19 @@ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai) snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data, &i2s->capture_dma_data); - conf = (7 << JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) | - (8 << JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) | - JZ_AIC_CONF_OVERFLOW_PLAY_LAST | - JZ_AIC_CONF_I2S | - JZ_AIC_CONF_INTERNAL_CODEC; + if (i2s->version >= JZ_I2S_JZ4780) { + conf = (7 << JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) | + (8 << JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) | + JZ_AIC_CONF_OVERFLOW_PLAY_LAST | + JZ_AIC_CONF_I2S | + JZ_AIC_CONF_INTERNAL_CODEC; + } else { + conf = (7 << JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) | + (8 << JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) | + JZ_AIC_CONF_OVERFLOW_PLAY_LAST | + JZ_AIC_CONF_I2S | + JZ_AIC_CONF_INTERNAL_CODEC; + } jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, JZ_AIC_CONF_RESET); jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf); @@ -422,13 +455,34 @@ static struct snd_soc_dai_driver jz4740_i2s_dai = { .resume = jz4740_i2s_resume, }; +static struct snd_soc_dai_driver jz4780_i2s_dai = { + .probe = jz4740_i2s_dai_probe, + .remove = jz4740_i2s_dai_remove, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = JZ4740_I2S_FMTS, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = JZ4740_I2S_FMTS, + }, + .ops = &jz4740_i2s_dai_ops, + .suspend = jz4740_i2s_suspend, + .resume = jz4740_i2s_resume, +}; + static const struct snd_soc_component_driver jz4740_i2s_component = { .name = "jz4740-i2s", }; #ifdef CONFIG_OF static const struct of_device_id jz4740_of_matches[] = { - { .compatible = "ingenic,jz4740-i2s" }, + { .compatible = "ingenic,jz4740-i2s", .data = (void *)JZ_I2S_JZ4740 }, + { .compatible = "ingenic,jz4780-i2s", .data = (void *)JZ_I2S_JZ4780 }, { /* sentinel */ } }; #endif @@ -438,11 +492,16 @@ static int jz4740_i2s_dev_probe(struct platform_device *pdev) struct jz4740_i2s *i2s; struct resource *mem; int ret; + const struct of_device_id *match; i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL); if (!i2s) return -ENOMEM; + match = of_match_device(jz4740_of_matches, &pdev->dev); + if (match) + i2s->version = (enum jz47xx_i2s_version)match->data; + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); i2s->base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(i2s->base)) @@ -460,8 +519,13 @@ static int jz4740_i2s_dev_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2s); - ret = devm_snd_soc_register_component(&pdev->dev, - &jz4740_i2s_component, &jz4740_i2s_dai, 1); + if (i2s->version == JZ_I2S_JZ4780) + ret = devm_snd_soc_register_component(&pdev->dev, + &jz4740_i2s_component, &jz4780_i2s_dai, 1); + else + ret = devm_snd_soc_register_component(&pdev->dev, + &jz4740_i2s_component, &jz4740_i2s_dai, 1); + if (ret) return ret; -- 1.9.1

3 2

[alsa-devel] [PATCH 2/2] ASoC: wm8996: ensure lower bounds of 1 for timeout
by Nicholas Mc Guire 09 Mar '15

09 Mar '15

wait_for_completion_timeout can be called with timeout == 0 due to msecs_to_jiffies(2) == 1 for HZ < 1000 and usecs_to_jiffies(300) == 1 for all reasonable values of HZ, thus the following timeout /= 2; sets timeout to 0. This patch simply adds a lower-bounds of 1. Signed-off-by: Nicholas Mc Guire <hofrat(a)osadl.org> --- line numbers from wm9666.c linux-next -next-20150306 2101 /* Wait for the FLL to lock, using the interrupt if possible */ 2102 if (Fref > 1000000) 2103 timeout = usecs_to_jiffies(300); 2104 else 2105 timeout = msecs_to_jiffies(2); 2106 2107 /* Allow substantially longer if we've actually got the IRQ, poll 2108 * at a slightly higher rate if we don't. 2109 */ 2110 if (i2c->irq) 2111 timeout *= 10; 2112 else 2113 timeout /= 2; 2114 2115 ret = wait_for_completion_timeout(&wm8996->fll_lock, 2116 timeout); The call-path here would then be: wait_for_completion_timeout(...,timeout) -> wait_for_common action==schedule_timeout -> schedule_timeout(timeout) ... expire = timeout + jiffies; so expire == jiffies here and the timer would expire immediately for systems with HZ<1000 due to msecs_to_jiffies(2) == 1 and the following timeout /= 2 -> timeout == 0, which is probably a bit more that a "slightly higher rate". This was only compile tested for exynos_defconfig + CONFIG_COMPILE_TEST=y, SND_SOC_ALL_CODECS=m (implies CONFIG_SND_SOC_WM8996=m) Patch is against 4.0-rc2 linux-next (localversion-next is -next-20150306) sound/soc/codecs/wm8996.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 24d9705..5ded102 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -2110,7 +2110,8 @@ static int wm8996_set_fll(struct snd_soc_codec *codec, int fll_id, int source, if (i2c->irq) timeout *= 10; else - timeout /= 2; + /* ensure timeout of atleast 1 jiffies */ + timeout = timeout/2 ? : 1; for (retry = 0; retry < 10; retry++) { time_left = wait_for_completion_timeout(&wm8996->fll_lock, -- 1.7.10.4

2 1

Re: [alsa-devel] [ALSA/hda] kernel BUG at drivers/base/driver.c:152!
by Takashi Iwai 09 Mar '15

09 Mar '15

At Sat, 7 Mar 2015 18:58:44 +0800, Fengguang Wu wrote: > > Greetings, > > 0day kernel testing robot got the below dmesg and the first bad commit is > > git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git topic/hda-regmap > > commit 3103d80b8a89f1797e87d7265f9b389a0db4ccd8 > Author: Takashi Iwai <tiwai(a)suse.de> > AuthorDate: Tue Feb 17 21:46:37 2015 +0100 > Commit: Takashi Iwai <tiwai(a)suse.de> > CommitDate: Tue Mar 3 14:35:44 2015 +0100 > > ALSA: hda - Make snd_hda_bus_type public > > Define the common hd-audio driver and device types to bind over > snd_hda_bus_type publicly. This allows to implement other type of > device and driver code over hd-audio bus. > > Now both struct hda_codec and struct hda_codec_driver inherit these > new struct hdac_device and struct hdac_driver, respectively. > > Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Fixed by the patch below now. Thanks! Takashi -- 8< -- From: Takashi Iwai <tiwai(a)suse.de> Subject: [PATCH] ALSA: hda - Fix panic at booting with built-in HDA driver The split of hdaudio bus type caused a kernel panic at booting when the HD-audio driver is built into kernel, because of the insufficient init call order. This patch changes the module_init() to subsys_initcall() to assure the bus type registration done before any other driver registrations. Reported-by: Fengguang Wu <fengguang.wu(a)intel.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/hda/hda_bus_type.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/hda/hda_bus_type.c b/sound/hda/hda_bus_type.c index 996515c6a248..519914a12e8a 100644 --- a/sound/hda/hda_bus_type.c +++ b/sound/hda/hda_bus_type.c @@ -38,5 +38,5 @@ static void __exit hda_bus_exit(void) bus_unregister(&snd_hda_bus_type); } -module_init(hda_bus_init); +subsys_initcall(hda_bus_init); module_exit(hda_bus_exit); -- 2.3.2

1 0

[alsa-devel] [PATCH_V2] ASoC: jz4740: Add jz4780 support
by Zubair Lutfullah Kakakhel 09 Mar '15

09 Mar '15

The jz4780 and jz4740 have very similar i2s blocks. The slight difference is in Rx/Tx fifos. And the bitclocks for input/output are different. This patch adds jz4780 support to the driver Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel(a)imgtec.com> --- Patch based on 4.0-rc3 Tested on the MIPS Creator CI20. V1 - > V2 Removed SND_DMAENGINE_PCM_FLAG_NO_RESIDUE as it is handled by dma driver Added a check for symmetric_rates flag for jz4780 --- .../bindings/sound/ingenic,jz4740-i2s.txt | 2 +- sound/soc/jz4740/jz4740-i2s.c | 58 +++++++++++++++++++--- 2 files changed, 51 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt index b414333..b623d50 100644 --- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt +++ b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt @@ -1,7 +1,7 @@ Ingenic JZ4740 I2S controller Required properties: -- compatible : "ingenic,jz4740-i2s" +- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s" - reg : I2S registers location and length - clocks : AIC and I2S PLL clock specifiers. - clock-names: "aic" and "i2s" diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c index 07f7781..08eb823 100644 --- a/sound/soc/jz4740/jz4740-i2s.c +++ b/sound/soc/jz4740/jz4740-i2s.c @@ -58,6 +58,12 @@ #define JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 12 #define JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 8 +#define JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 24 +#define JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 16 +#define JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_MASK \ + (0xf << JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) +#define JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_MASK \ + (0x1f << JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) #define JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE_MASK (0x7 << 19) #define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK (0x7 << 16) @@ -79,6 +85,7 @@ #define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET 16 #define JZ_AIC_I2S_FMT_DISABLE_BIT_CLK BIT(12) +#define JZ_AIC_I2S_FMT_DISABLE_BIT_ICLK BIT(13) #define JZ_AIC_I2S_FMT_ENABLE_SYS_CLK BIT(4) #define JZ_AIC_I2S_FMT_MSB BIT(0) @@ -87,6 +94,13 @@ #define JZ_AIC_CLK_DIV_MASK 0xf #define I2SDIV_DV_SHIFT 8 #define I2SDIV_DV_MASK (0xf << I2SDIV_DV_SHIFT) +#define I2SDIV_IDV_SHIFT 8 +#define I2SDIV_IDV_MASK (0xf << I2SDIV_IDV_SHIFT) + +enum jz47xx_i2s_version { + JZ_I2S_JZ4740, + JZ_I2S_JZ4780, +}; struct jz4740_i2s { struct resource *mem; @@ -98,6 +112,8 @@ struct jz4740_i2s { struct snd_dmaengine_dai_dma_data playback_dma_data; struct snd_dmaengine_dai_dma_data capture_dma_data; + + enum jz47xx_i2s_version version; }; static inline uint32_t jz4740_i2s_read(const struct jz4740_i2s *i2s, @@ -267,13 +283,22 @@ static int jz4740_i2s_hw_params(struct snd_pcm_substream *substream, ctrl |= JZ_AIC_CTRL_MONO_TO_STEREO; else ctrl &= ~JZ_AIC_CTRL_MONO_TO_STEREO; + + div_reg &= ~I2SDIV_DV_MASK; + div_reg |= (div - 1) << I2SDIV_DV_SHIFT; } else { ctrl &= ~JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK; ctrl |= sample_size << JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET; + + if (i2s->version >= JZ_I2S_JZ4780) { + div_reg &= ~I2SDIV_IDV_MASK; + div_reg |= (div - 1) << I2SDIV_IDV_SHIFT; + } else { + div_reg &= ~I2SDIV_DV_MASK; + div_reg |= (div - 1) << I2SDIV_DV_SHIFT; + } } - div_reg &= ~I2SDIV_DV_MASK; - div_reg |= (div - 1) << I2SDIV_DV_SHIFT; jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl); jz4740_i2s_write(i2s, JZ_REG_AIC_CLK_DIV, div_reg); @@ -369,11 +394,19 @@ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai) snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data, &i2s->capture_dma_data); - conf = (7 << JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) | - (8 << JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) | - JZ_AIC_CONF_OVERFLOW_PLAY_LAST | - JZ_AIC_CONF_I2S | - JZ_AIC_CONF_INTERNAL_CODEC; + if (i2s->version >= JZ_I2S_JZ4780) { + conf = (7 << JZ4780_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) | + (8 << JZ4780_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) | + JZ_AIC_CONF_OVERFLOW_PLAY_LAST | + JZ_AIC_CONF_I2S | + JZ_AIC_CONF_INTERNAL_CODEC; + } else { + conf = (7 << JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) | + (8 << JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) | + JZ_AIC_CONF_OVERFLOW_PLAY_LAST | + JZ_AIC_CONF_I2S | + JZ_AIC_CONF_INTERNAL_CODEC; + } jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, JZ_AIC_CONF_RESET); jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf); @@ -428,7 +461,8 @@ static const struct snd_soc_component_driver jz4740_i2s_component = { #ifdef CONFIG_OF static const struct of_device_id jz4740_of_matches[] = { - { .compatible = "ingenic,jz4740-i2s" }, + { .compatible = "ingenic,jz4740-i2s", .data = (void *)JZ_I2S_JZ4740 }, + { .compatible = "ingenic,jz4780-i2s", .data = (void *)JZ_I2S_JZ4780 }, { /* sentinel */ } }; #endif @@ -438,11 +472,16 @@ static int jz4740_i2s_dev_probe(struct platform_device *pdev) struct jz4740_i2s *i2s; struct resource *mem; int ret; + const struct of_device_id *match; i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL); if (!i2s) return -ENOMEM; + match = of_match_device(jz4740_of_matches, &pdev->dev); + if (match) + i2s->version = (enum jz47xx_i2s_version)match->data; + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); i2s->base = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(i2s->base)) @@ -460,6 +499,9 @@ static int jz4740_i2s_dev_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2s); + if (i2s->version >= JZ_I2S_JZ4780) + jz4740_i2s_dai.symmetric_rates = 0; + ret = devm_snd_soc_register_component(&pdev->dev, &jz4740_i2s_component, &jz4740_i2s_dai, 1); if (ret) -- 1.9.1

2 1

Re: [alsa-devel] Using loopback card to Connect GSM two way call to the real sound card UDA1345TS
by Srinivasan S 09 Mar '15

09 Mar '15

Dear All, Could you please provide any inputs w.r.t the loopback card using snd-aloop & alsaloop, how this loopback card can be used to connect the GSM two way call simultanoeusly to the UDA1345TS codec on MCASP0 of the am335x (UDA1345TS ie., real sound card) The codec has two output channels VOUTL, VOUTR & two input channels VINL , VINR As I am pretty new to linux audio particularly ALSA Framework as I was involved only in intial codec bringup using aplay & arecord utilities , as I was having some trouble getting a grasp on it all, (as I want this to be darecord one in ALSA only without entering into gstreamer or ffmpeg, could you please confirm on the same that whether can it be done in ALSA only) If this probably isn't the place to ask this question, but I am not sure where is. Feel free to point me somewhere else if there is a better place :) So it seems what is happening is basically when i up the channels from VINL to VOUTL, & VINR to VOUTR ie., I am able capture from VINR & play back using VOUTR & similarly I am able to capture from VINR & route to VOUTR using the below asound.conf & the attached application With this am able to achieve only one way call at a time by running only one application at a time ie., alsa_loopback_min_mono_VINL.c or alsa_loopback_min_mono_VINR.c Could you please kindly let me know how two way call can be established simultaneously finally with only one application , as I tried merging both apps ie., (alsa_loopback_min_mono_VINL & alsa_loopback_min_mono_VINR) at that moment am getting device resource busy, when I tried to open snd_pcm_open (&playback_handle_left, pldevice, SND_PCM_STREAM_PLAYBACK, 0) in the application alsa_loopback_min_mono.c Kindly do the needful as early as possible, Awaiting for your replies, Many Many Thanks a lot for your replies & would appreciate the same w.r.t my earlier two queries

2 1

[alsa-devel] [PATCH v2 0/3] Improve eye-diagram & single-ended test for rk3288 hdmi
by Yakir Yang 09 Mar '15

09 Mar '15

RK3288 hdmi eye-diagram test would fail when pixel clock is 148.5MHz, and single-ended test would failed when display mode is 74.25MHz. To fix such problems, we make those patch set: - Fix some code style, leave space for next patches. - For hdmi eye-diagram test, we turn on the Transmitter Trailer-B and improve slopeboost to 10%-20% decrease. - For hdmi single-ended test, we set CKLVL to 18 and & TXLVL to 19 when pixel clock is 74.25MHz, keep CKLVL & TXLVL to 13 when pixel clock is 148.5MHz. Changes in v2: - set slopeboost back to 10%-20%, then rasing/falling time would pass. - For pixel clock less than 74.25MHz, set txlvl to 19 and set cklvl to 18. Yakir Yang (3): drm: bridge/dw_hdmi: fixed codec style drm: bridge/dw_hdmi_rockchip: improve hdmi eye-diagram test drm: bridge/dw_hdmi: improve hdmi single-end test drivers/gpu/drm/bridge/dw_hdmi.c | 20 ++++++++++---------- drivers/gpu/drm/imx/dw_hdmi-imx.c | 12 ++++++------ drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++------- include/drm/bridge/dw_hdmi.h | 5 +++-- 4 files changed, 26 insertions(+), 25 deletions(-) -- 2.1.2

1 0

[alsa-devel] [PATCH] ASoC: davinci-mcasp: add missing semicolon
by Arnd Bergmann 09 Mar '15

09 Mar '15

A recent patch introduced a build error because of a trivial typo, this gets it back to compile. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Fixes: 6afda7f50754 ("ASoC: davinci-mcasp: Allow complete shutdown of McASP when not in use") --- I'm guessing this was reported already, but if not, please apply this patch. diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 33cea0728cd2..d40b392b3da2 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -1058,7 +1058,7 @@ static int davinci_mcasp_suspend(struct snd_soc_dai *dai) u32 reg; int i; - context->pm_state = pm_runtime_enabled(mcasp->dev) + context->pm_state = pm_runtime_enabled(mcasp->dev); if (!context->pm_state) pm_runtime_get_sync(mcasp->dev);

2 1

[alsa-devel] [PATCH] ASoC: Remove unnecessary device_remove_file()
by Lars-Peter Clausen 08 Mar '15

08 Mar '15

Since commit d29697dc3b92 ("ASoC: Add sysfs entries via static attribute groups") the sysfs attributes of the rtd are manged by the device core and there is no need to manually call device_remove_file() anymore. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/soc-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 5c0658d..161af04 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1410,7 +1410,6 @@ static void soc_remove_aux_dev(struct snd_soc_card *card, int num) /* unregister the rtd device */ if (rtd->dev_registered) { - device_remove_file(rtd->dev, &dev_attr_codec_reg); device_unregister(rtd->dev); rtd->dev_registered = 0; } -- 1.8.0

2 1