October 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 00/17] ASoC: Intel: Skylake: More fixes and updates
by Vinod Koul 30 Oct '15

30 Oct '15

Hi all, This series adds more minor fixes and some enhancements to the driver. Most of the fixes patches are single line count changes The enhancements are: - optimizing code and using module pin info for unbinding - supporting virtual dsp widgets like switches in topology - add pin formats and supports multiple heterogeneous pins Hardik T Shah (3): ASoC: Intel: Skylake: Add multiple pin formats ASoC: Intel: Skylake: Update the topology interface structure ASoC: Intel: Skylake: Add support for module GUIDs Jeeja KP (14): ASoC: Intel: Skylake: Fix to correct check for non DSP widget ASoC: Intel: Skylake: Fix not to ignore return value in be hw_params ASoC: Intel: Skylake: Fix to add 32 bit in update FE params ASoC: Intel: Skylake: Fix to ignore codec_mask check in probe ASoC: Intel: Skylake: Fix to ignore blob check if link type is HDA ASoC: Intel: Skylake: Fix support for multiple pins in a module ASoC: Intel: Skylake: Fix bit depth when querying the NHLT blob ASoC: Intel: Skylake: use module_pin info for unbind ASoC: Intel: Skylake: Add support for virtual dsp widgets ASoC: Intel: Skylake: Fix DSP pipe underrun/overrun issue ASoC: Intel: Skylake: Fix to remove be copier widget power check ASoC: Intel: Skylake: Ignore rate check for DMIC link ASoC: Intel: Skylake: Fix to remove channel_map calculation ASoC: Intel: Skylake: Fix PM behaviour sound/soc/intel/skylake/skl-messages.c | 189 +++++-------- sound/soc/intel/skylake/skl-nhlt.c | 19 +- sound/soc/intel/skylake/skl-pcm.c | 139 +++++----- sound/soc/intel/skylake/skl-topology.c | 387 ++++++++++++++------------- sound/soc/intel/skylake/skl-topology.h | 35 ++- sound/soc/intel/skylake/skl-tplg-interface.h | 90 +++++-- sound/soc/intel/skylake/skl.c | 63 +++-- sound/soc/intel/skylake/skl.h | 1 - 8 files changed, 483 insertions(+), 440 deletions(-) -- 2.4.3

2 40

[alsa-devel] [PATCH] snd-cs46xx: Fix suspend for all channels
by Ondrej Zary 30 Oct '15

30 Oct '15

snd_cs46xx_suspend() is missing snd_pcm_suspend_all calls for pcm_rear, pcm_center_lfe and pcm_iec958. There's also a copy/paste bug in snd_cs46xx_pcm_iec958(), overwriting pcm_rear in struct snd_cs46xx, leaving pcm_iec958 unused. Fix all this to allow all channels to survive suspend/resume. Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- sound/pci/cs46xx/cs46xx_lib.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index e62c841..2706f27 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -1864,7 +1864,7 @@ int snd_cs46xx_pcm_iec958(struct snd_cs46xx *chip, int device) /* global setup */ pcm->info_flags = 0; strcpy(pcm->name, "CS46xx - IEC958"); - chip->pcm_rear = pcm; + chip->pcm_iec958 = pcm; snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), 64*1024, 256*1024); @@ -3780,6 +3780,11 @@ static int snd_cs46xx_suspend(struct device *dev) snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); chip->in_suspend = 1; snd_pcm_suspend_all(chip->pcm); +#ifdef CONFIG_SND_CS46XX_NEW_DSP + snd_pcm_suspend_all(chip->pcm_rear); + snd_pcm_suspend_all(chip->pcm_center_lfe); + snd_pcm_suspend_all(chip->pcm_iec958); +#endif // chip->ac97_powerdown = snd_cs46xx_codec_read(chip, AC97_POWER_CONTROL); // chip->ac97_general_purpose = snd_cs46xx_codec_read(chip, BA0_AC97_GENERAL_PURPOSE); -- Ondrej Zary

2 1

[alsa-devel] [PATCH] snd-cs46xx: Fix Duplicate front for CS4294 and CS4298 codecs
by Ondrej Zary 30 Oct '15

30 Oct '15

Currently, the Duplicate front control is enabled only for two specific revisions of CS4294. Enable it for all CS4294 and CS4298 codecs instead. This fixes rear output on my VC-4620N sound card (CS4620 + CS4298 rev.5). Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- sound/pci/cs46xx/cs46xx_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c index 2a9f4a3..e62c841 100644 --- a/sound/pci/cs46xx/cs46xx_lib.c +++ b/sound/pci/cs46xx/cs46xx_lib.c @@ -2528,7 +2528,7 @@ int snd_cs46xx_mixer(struct snd_cs46xx *chip, int spdif_device) #ifdef CONFIG_SND_CS46XX_NEW_DSP if (chip->nr_ac97_codecs == 1) { unsigned int id2 = chip->ac97[CS46XX_PRIMARY_CODEC_INDEX]->id & 0xffff; - if (id2 == 0x592b || id2 == 0x592d) { + if ((id2 & 0xfff0) == 0x5920) { /* CS4294 and CS4298 */ err = snd_ctl_add(card, snd_ctl_new1(&snd_cs46xx_front_dup_ctl, chip)); if (err < 0) return err; -- Ondrej Zary

2 1

[alsa-devel] Different reg_default for rt5650 codec
by Bard Liao 30 Oct '15

30 Oct '15

Mark, rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So, we may need separate reg_defaults for rt5645 and rt5650. My idea is to assign a new reg_defaults once rt5650 is detected. Something like case RT5650_DEVICE_ID: + rt5645->regmap-> reg_defaults = rt5650_reg; + rt5645->regmap-> num_reg_defaults = ARRAY_SIZE(rt5650_reg) rt5645->codec_type = CODEC_TYPE_RT5650; break; Is that ok? Or should I use different regmap_config? There is one question if I use different regmap_config. We will know which codec it is by regmap_read. So, regmap is init before we know which codec it is. Assume rt5645_regmap is used and what should I do once rt5650 is detected? Thanks. Bard Liao Computer Peripherals Business Unit Realtek Semiconductor Corp. 886-3-578-0211 ext. 13334 bardliao(a)realtek.com

2 2

[alsa-devel] Applied "- filename : ASoC-rsrc-card-Clarify-compatible-value.patch
by Mark Brown 30 Oct '15

30 Oct '15

- name : ASoC: rsrc-card: Clarify compatible value" to the asoc tree In-Reply-To: <1446148795-20629-1-git-send-email-geert+renesas(a)glider.be> The patch - filename : ASoC-rsrc-card-Clarify-compatible-value.patch - name : ASoC: rsrc-card: Clarify compatible value has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 33833b9af9ec89356fbfcd9ff0679b136f20e12f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Thu, 29 Oct 2015 20:59:55 +0100 Subject: [PATCH] ASoC: rsrc-card: Clarify compatible value The compatible value can be board-specific, not SoC-specific. Add curly braces to indicate that the board type is optional. Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt index 962748a..2b2caa2 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt @@ -4,8 +4,8 @@ Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC Required properties: -- compatible : "renesas,rsrc-card,<board>" - Examples with soctypes are: +- compatible : "renesas,rsrc-card{,<board>}" + Examples with boards are: - "renesas,rsrc-card" - "renesas,rsrc-card,lager" - "renesas,rsrc-card,koelsch" -- 2.6.1

1 0

[alsa-devel] Applied "- filename : ASoC-rt5677-use-active-low-logic-for-reset-pin.patch
by Mark Brown 30 Oct '15

30 Oct '15

- name : ASoC: rt5677: use 'active low' logic for reset pin" to the asoc tree In-Reply-To: <1446157919-27151-1-git-send-email-anatol.pomozov(a)gmail.com> The patch - filename : ASoC-rt5677-use-active-low-logic-for-reset-pin.patch - name : ASoC: rt5677: use 'active low' logic for reset pin has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 7f7d276ef2f76f781d9867653d22ee96fc86edf2 Mon Sep 17 00:00:00 2001 From: Anatol Pomozov <anatol.pomozov(a)gmail.com> Date: Thu, 29 Oct 2015 15:31:59 -0700 Subject: [PATCH] ASoC: rt5677: use 'active low' logic for reset pin According to the datasheet RESET is active low pin, i.e. system goes to reset state when pin signal is low. The previous implementeation was assuming the pin is configured as 'active high' in DTS. Changle the gpio handling code and DTS configuration to 'active low'. Signed-off-by: Anatol Pomozov <anatol.pomozov(a)gmail.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Documentation/devicetree/bindings/sound/rt5677.txt | 2 +- sound/soc/codecs/rt5677.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt index f070789..1b3c13d 100644 --- a/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/Documentation/devicetree/bindings/sound/rt5677.txt @@ -18,7 +18,7 @@ Required properties: Optional properties: - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. -- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. +- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low. - realtek,in1-differential - realtek,in2-differential diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index b4cd7e3..f73fd12 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -4766,7 +4766,7 @@ static int rt5677_remove(struct snd_soc_codec *codec) regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec); gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); - gpiod_set_value_cansleep(rt5677->reset_pin, 0); + gpiod_set_value_cansleep(rt5677->reset_pin, 1); return 0; } @@ -4781,7 +4781,7 @@ static int rt5677_suspend(struct snd_soc_codec *codec) regcache_mark_dirty(rt5677->regmap); gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); - gpiod_set_value_cansleep(rt5677->reset_pin, 0); + gpiod_set_value_cansleep(rt5677->reset_pin, 1); } return 0; @@ -4793,7 +4793,7 @@ static int rt5677_resume(struct snd_soc_codec *codec) if (!rt5677->dsp_vad_en) { gpiod_set_value_cansleep(rt5677->pow_ldo2, 1); - gpiod_set_value_cansleep(rt5677->reset_pin, 1); + gpiod_set_value_cansleep(rt5677->reset_pin, 0); if (rt5677->pow_ldo2 || rt5677->reset_pin) msleep(10); @@ -5138,7 +5138,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, return ret; } rt5677->reset_pin = devm_gpiod_get_optional(&i2c->dev, - "realtek,reset", GPIOD_OUT_HIGH); + "realtek,reset", GPIOD_OUT_LOW); if (IS_ERR(rt5677->reset_pin)) { ret = PTR_ERR(rt5677->reset_pin); dev_err(&i2c->dev, "Failed to request RESET: %d\n", ret); -- 2.6.1

1 0

[alsa-devel] Applied "- filename : ASoC-rsnd-audio_clkout0-1-2-3-are-optinal-properties.patch
by Mark Brown 30 Oct '15

30 Oct '15

- name : ASoC: rsnd: audio_clkout0/1/2/3 are optinal properties" to the asoc tree In-Reply-To: <871tce16oa.wl%kuninori.morimoto.gx(a)renesas.com> The patch - filename : ASoC-rsnd-audio_clkout0-1-2-3-are-optinal-properties.patch - name : ASoC: rsnd: audio_clkout0/1/2/3 are optinal properties has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 61af9ed7475090b79e9305a4c52c9d3adb2d1784 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Date: Thu, 29 Oct 2015 07:42:40 +0000 Subject: [PATCH] ASoC: rsnd: audio_clkout0/1/2/3 are optional properties Renesas sound driver can output Audio-clkout0/1/2/3, but these are optional properties for each board. Reported-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index c57cbd6..bbcb327 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -34,6 +34,8 @@ Required properties: see below for detail. - #sound-dai-cells : it must be 0 if your system is using single DAI it must be 1 if your system is using multi DAI + +Optional properties: - #clock-cells : it must be 0 if your system has audio_clkout it must be 1 if your system has audio_clkout0/1/2/3 - clock-frequency : for all audio_clkout0/1/2/3 -- 2.6.1

1 0

[alsa-devel] [PATCH V2 00/10] Add support for Imagination Technologies audio controllers
by Damien Horsley 30 Oct '15

30 Oct '15

From: "Damien.Horsley" <Damien.Horsley(a)imgtec.com> Add drivers and binding documents for the following Imagination Technologies audio controllers: I2S Input Controller I2S Output Controller Parallel Output Controller SPDIF Input Controller SPDIF Output Controller These controllers are used in Pistachio SoC Changes in V2: - Sparse warnings fixed Damien.Horsley (10): ASoC: img: Add binding document for I2S input controller ASoC: img: Add driver for I2S input controller ASoC: img: Add binding document for I2S output controller ASoC: img: Add driver for I2S output controller ASoC: img: Add binding document for parallel output controller ASoC: img: Add driver for parallel output controller ASoC: img: Add binding document for SPDIF input controller ASoC: img: Add driver for SPDIF input controller ASoC: img: Add binding document for SPDIF output controller ASoC: img: Add driver for SPDIF output controller .../devicetree/bindings/sound/img,i2s-in.txt | 45 ++ .../devicetree/bindings/sound/img,i2s-out.txt | 49 ++ .../devicetree/bindings/sound/img,parallel-out.txt | 44 ++ .../devicetree/bindings/sound/img,spdif-in.txt | 41 ++ .../devicetree/bindings/sound/img,spdif-out.txt | 44 ++ sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/img/Kconfig | 44 ++ sound/soc/img/Makefile | 5 + sound/soc/img/img-i2s-in.c | 508 +++++++++++++ sound/soc/img/img-i2s-out.c | 552 ++++++++++++++ sound/soc/img/img-parallel-out.c | 373 ++++++++++ sound/soc/img/img-spdif-in.c | 799 +++++++++++++++++++++ sound/soc/img/img-spdif-out.c | 433 +++++++++++ 14 files changed, 2939 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/img,i2s-in.txt create mode 100644 Documentation/devicetree/bindings/sound/img,i2s-out.txt create mode 100644 Documentation/devicetree/bindings/sound/img,parallel-out.txt create mode 100644 Documentation/devicetree/bindings/sound/img,spdif-in.txt create mode 100644 Documentation/devicetree/bindings/sound/img,spdif-out.txt create mode 100644 sound/soc/img/Kconfig create mode 100644 sound/soc/img/Makefile create mode 100644 sound/soc/img/img-i2s-in.c create mode 100644 sound/soc/img/img-i2s-out.c create mode 100644 sound/soc/img/img-parallel-out.c create mode 100644 sound/soc/img/img-spdif-in.c create mode 100644 sound/soc/img/img-spdif-out.c -- 2.1.4

2 27

[alsa-devel] [PATCH] ASoC: rsrc-card: Clarify compatible value
by Geert Uytterhoeven 30 Oct '15

30 Oct '15

The compatible value can be board-specific, not SoC-specific. Add curly braces to indicate that the board type is optional. Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> --- Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt index 962748a8d9194dee..2b2caa281ce38abc 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt @@ -4,8 +4,8 @@ Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC Required properties: -- compatible : "renesas,rsrc-card,<board>" - Examples with soctypes are: +- compatible : "renesas,rsrc-card{,<board>}" + Examples with boards are: - "renesas,rsrc-card" - "renesas,rsrc-card,lager" - "renesas,rsrc-card,koelsch" -- 1.9.1

2 1

[alsa-devel] [PATCH] ASoC: rt5677: use 'active low' logic for reset pin
by Anatol Pomozov 29 Oct '15

29 Oct '15

According to the datasheet RESET is active low pin, i.e. system goes to reset state when pin signal is low. The previous implementeation was assuming the pin is configured as 'active high' in DTS. Changle the gpio handling code and DTS configuration to 'active low'. Signed-off-by: Anatol Pomozov <anatol.pomozov(a)gmail.com> --- Documentation/devicetree/bindings/sound/rt5677.txt | 2 +- sound/soc/codecs/rt5677.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt index f070789..1b3c13d 100644 --- a/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/Documentation/devicetree/bindings/sound/rt5677.txt @@ -18,7 +18,7 @@ Required properties: Optional properties: - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. -- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. +- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low. - realtek,in1-differential - realtek,in2-differential diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index b4cd7e3..f73fd12 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -4766,7 +4766,7 @@ static int rt5677_remove(struct snd_soc_codec *codec) regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec); gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); - gpiod_set_value_cansleep(rt5677->reset_pin, 0); + gpiod_set_value_cansleep(rt5677->reset_pin, 1); return 0; } @@ -4781,7 +4781,7 @@ static int rt5677_suspend(struct snd_soc_codec *codec) regcache_mark_dirty(rt5677->regmap); gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); - gpiod_set_value_cansleep(rt5677->reset_pin, 0); + gpiod_set_value_cansleep(rt5677->reset_pin, 1); } return 0; @@ -4793,7 +4793,7 @@ static int rt5677_resume(struct snd_soc_codec *codec) if (!rt5677->dsp_vad_en) { gpiod_set_value_cansleep(rt5677->pow_ldo2, 1); - gpiod_set_value_cansleep(rt5677->reset_pin, 1); + gpiod_set_value_cansleep(rt5677->reset_pin, 0); if (rt5677->pow_ldo2 || rt5677->reset_pin) msleep(10); @@ -5138,7 +5138,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, return ret; } rt5677->reset_pin = devm_gpiod_get_optional(&i2c->dev, - "realtek,reset", GPIOD_OUT_HIGH); + "realtek,reset", GPIOD_OUT_LOW); if (IS_ERR(rt5677->reset_pin)) { ret = PTR_ERR(rt5677->reset_pin); dev_err(&i2c->dev, "Failed to request RESET: %d\n", ret); -- 2.6.0.rc2.230.g3dd15c0

1 0