June 2014 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: intel: The Baytrail/MAX98090 driver depends on I2C
by Mark Brown 02 Jun '14

02 Jun '14

From: Mark Brown <broonie(a)linaro.org> Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/intel/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index cd3498736e91..c30fedb3e149 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -52,7 +52,7 @@ config SND_SOC_INTEL_BYT_RT5640_MACH config SND_SOC_INTEL_BYT_MAX98090_MACH tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec" - depends on SND_SOC_INTEL_SST && X86_INTEL_LPSS + depends on SND_SOC_INTEL_SST && X86_INTEL_LPSS && I2C select SND_SOC_INTEL_BAYTRAIL select SND_SOC_MAX98090 help -- 2.0.0.rc4

2 2

[alsa-devel] On patch_realtek.c can' sent command to the codec via
by asd 02 Jun '14

02 Jun '14

Hi On patch_realtek.c can' sent command to the codec via command snd_hda_codec_write. Suppose to be entire module useless and hda-intel module to be a active.

1 0

[alsa-devel] Realtek Alc 883 not have eapd
by asd 02 Jun '14

02 Jun '14

Below is patch wich disable eapd.

2 1

[alsa-devel] [PATCH] firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
by Takashi Sakamoto 02 Jun '14

02 Jun '14

According to AM824 in IEC 61883-6:2002, 2 bits in LSB of label for Raw Audio data means Valid Length Code (VBL). Ths value is: - b00 for 24 bits sample (label is 0x40) - b01 for 20 bits sample (label is 0x41) - b10 for 16 bits sample (label is 0x42) But current firewire-lib apply 24 bits label for both of 16/24 bits samples. As long as developers investigate BeBoB/Fireworks/OXFW/Dice, all of them have a behaviour to ignore the label. They can generate correct sound even if firewire-lib gives wrong label (i.e. 0xff). On BeBoB, this is not only for Raw Audio data channel, but also for IEC 60958 Conformant data channel. So there is little possibility of regression. Acked-by: Clemens Ladisch <clemens(a)ladisch.de> Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/amdtp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/firewire/amdtp.c b/sound/firewire/amdtp.c index 31dd1cf..f96bf4c 100644 --- a/sound/firewire/amdtp.c +++ b/sound/firewire/amdtp.c @@ -418,7 +418,7 @@ static void amdtp_write_s16(struct amdtp_stream *s, for (i = 0; i < frames; ++i) { for (c = 0; c < channels; ++c) { buffer[s->pcm_positions[c]] = - cpu_to_be32((*src << 8) | 0x40000000); + cpu_to_be32((*src << 8) | 0x42000000); src++; } buffer += s->data_block_quadlets; -- 1.8.3.2

2 1

[alsa-devel] [PATCH 1/1] ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
by ronan.marquet＠orange.fr 02 Jun '14

02 Jun '14

From: Ronan Marquet <ronan.marquet(a)orange.fr> Correcion of wrong fixup entries add in commit ca8f0424 to replace static model quirk for PB V7900 laptop (will model). Signed-off-by: Ronan Marquet <ronan.marquet(a)orange.fr> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 49e884f..0e3a7f6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1647,12 +1647,10 @@ static const struct hda_fixup alc260_fixups[] = { [ALC260_FIXUP_COEF] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { - { 0x20, AC_VERB_SET_COEF_INDEX, 0x07 }, - { 0x20, AC_VERB_SET_PROC_COEF, 0x3040 }, + { 0x1a, AC_VERB_SET_COEF_INDEX, 0x07 }, + { 0x1a, AC_VERB_SET_PROC_COEF, 0x3040 }, { } }, - .chained = true, - .chain_id = ALC260_FIXUP_HP_PIN_0F, }, [ALC260_FIXUP_GPIO1] = { .type = HDA_FIXUP_VERBS, -- 2.0.0.rc2

2 1

[alsa-devel] no sound with intel audio
by Petr Maivald 01 Jun '14

01 Jun '14

[1.] One line summary of the problem: no sound [2.] Full description of the problem/report: no sound [3.] Keywords (i.e., modules, networking, kernel): [4.] Kernel version (from /proc/version): Linux version 3.15.0-031500rc7-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201405251935 SMP Sun May 25 23:36:23 UTC 2014 [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) [6.] A small shell script or example program which triggers the problem (if possible) [7.] Environment Description: Ubuntu 14.04 LTS Release: 14.04 [7.1.] Software (add the output of the ver_linux script here) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux BuildOut 3.15.0-031500rc7-generic #201405251935 SMP Sun May 25 23:36:23 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Gnu C 4.8 Gnu make 3.81 binutils 2.24 util-linux 2.20.1 mount support module-init-tools 15 e2fsprogs 1.42.9 PPP 2.4.5 Linux C Library 2.19 Dynamic linker (ldd) 2.19 Procps 3.3.9 Net-tools 1.60 Kbd 1.15.5 Sh-utils 8.21 wireless-tools 30 Modules Loaded nls_iso8859_1 dm_crypt ctr ccm rfcomm bnep intel_rapl binfmt_misc arc4 x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic iwlmvm coretemp kvm_intel kvm mac80211 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 uvcvideo lrw gf128mul glue_helper ablk_helper cryptd snd_hda_intel videobuf2_vmalloc snd_hda_controller videobuf2_memops microcode snd_hda_codec i915 videobuf2_core snd_hwdep snd_pcm videodev rts5139 snd_seq_midi snd_seq_midi_event btusb snd_rawmidi snd_seq bluetooth iwlwifi drm_kms_helper dell_wmi sparse_keymap 6lowpan_iphc cfg80211 drm parport_pc dell_laptop ppdev mei_me lp snd_seq_device dcdbas snd_timer i2c_algo_bit mei parport snd soundcore lpc_ich joydev wmi serio_raw video soc_button_array mac_hid psmouse ahci libahci r8169 mii [7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 69 model name : Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz stepping : 1 microcode : 0x17 cpu MHz : 2049.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid bogomips : 4788.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 69 model name : Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz stepping : 1 microcode : 0x17 cpu MHz : 1899.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid bogomips : 4788.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 69 model name : Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz stepping : 1 microcode : 0x17 cpu MHz : 1786.500 cache size : 4096 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid bogomips : 4788.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 69 model name : Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz stepping : 1 microcode : 0x17 cpu MHz : 1974.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid bogomips : 4788.80 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: [7.3.] Module information (from /proc/modules): nls_iso8859_1 12713 0 - Live 0x0000000000000000 dm_crypt 23456 0 - Live 0x0000000000000000 ctr 13193 3 - Live 0x0000000000000000 ccm 17856 3 - Live 0x0000000000000000 rfcomm 75078 8 - Live 0x0000000000000000 bnep 19884 2 - Live 0x0000000000000000 intel_rapl 19238 0 - Live 0x0000000000000000 binfmt_misc 17508 1 - Live 0x0000000000000000 arc4 12573 2 - Live 0x0000000000000000 x86_pkg_temp_thermal 14312 0 - Live 0x0000000000000000 intel_powerclamp 19099 0 - Live 0x0000000000000000 snd_hda_codec_realtek 72529 1 - Live 0x0000000000000000 snd_hda_codec_hdmi 48229 1 - Live 0x0000000000000000 snd_hda_codec_generic 70087 1 snd_hda_codec_realtek, Live 0x0000000000000000 iwlmvm 220688 0 - Live 0x0000000000000000 coretemp 13638 0 - Live 0x0000000000000000 kvm_intel 148919 0 - Live 0x0000000000000000 kvm 463808 1 kvm_intel, Live 0x0000000000000000 mac80211 663883 1 iwlmvm, Live 0x0000000000000000 crct10dif_pclmul 14268 0 - Live 0x0000000000000000 crc32_pclmul 13180 0 - Live 0x0000000000000000 ghash_clmulni_intel 13230 0 - Live 0x0000000000000000 aesni_intel 152648 6 - Live 0x0000000000000000 aes_x86_64 17131 1 aesni_intel, Live 0x0000000000000000 uvcvideo 82299 0 - Live 0x0000000000000000 lrw 13323 1 aesni_intel, Live 0x0000000000000000 gf128mul 14951 1 lrw, Live 0x0000000000000000 glue_helper 14095 1 aesni_intel, Live 0x0000000000000000 ablk_helper 13597 1 aesni_intel, Live 0x0000000000000000 cryptd 20531 3 ghash_clmulni_intel,aesni_intel,ablk_helper, Live 0x0000000000000000 snd_hda_intel 30608 1 - Live 0x0000000000000000 videobuf2_vmalloc 13216 1 uvcvideo, Live 0x0000000000000000 snd_hda_controller 35518 1 snd_hda_intel, Live 0x0000000000000000 videobuf2_memops 13362 1 videobuf2_vmalloc, Live 0x0000000000000000 microcode 24391 0 - Live 0x0000000000000000 snd_hda_codec 144671 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller, Live 0x0000000000000000 i915 873516 4 - Live 0x0000000000000000 videobuf2_core 45435 1 uvcvideo, Live 0x0000000000000000 snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000 snd_pcm 113863 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller,snd_hda_codec, Live 0x0000000000000000 videodev 149504 2 uvcvideo,videobuf2_core, Live 0x0000000000000000 rts5139 318308 0 - Live 0x0000000000000000 (C) snd_seq_midi 13564 0 - Live 0x0000000000000000 snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000 btusb 32555 0 - Live 0x0000000000000000 snd_rawmidi 30865 1 snd_seq_midi, Live 0x0000000000000000 snd_seq 67636 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000 bluetooth 461775 22 rfcomm,bnep,btusb, Live 0x0000000000000000 iwlwifi 185872 1 iwlmvm, Live 0x0000000000000000 drm_kms_helper 59729 1 i915, Live 0x0000000000000000 dell_wmi 12681 0 - Live 0x0000000000000000 sparse_keymap 13890 1 dell_wmi, Live 0x0000000000000000 6lowpan_iphc 18968 1 bluetooth, Live 0x0000000000000000 cfg80211 515506 3 iwlmvm,mac80211,iwlwifi, Live 0x0000000000000000 drm 310655 4 i915,drm_kms_helper, Live 0x0000000000000000 parport_pc 32906 0 - Live 0x0000000000000000 dell_laptop 18315 0 - Live 0x0000000000000000 ppdev 17711 0 - Live 0x0000000000000000 mei_me 18562 0 - Live 0x0000000000000000 lp 17799 0 - Live 0x0000000000000000 snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x0000000000000000 dcdbas 15017 1 dell_laptop, Live 0x0000000000000000 snd_timer 30118 2 snd_pcm,snd_seq, Live 0x0000000000000000 i2c_algo_bit 13564 1 i915, Live 0x0000000000000000 mei 87522 1 mei_me, Live 0x0000000000000000 parport 42481 3 parport_pc,ppdev,lp, Live 0x0000000000000000 snd 74195 13 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_seq_device,snd_timer, Live 0x0000000000000000 soundcore 12680 2 snd_hda_codec,snd, Live 0x0000000000000000 lpc_ich 21176 0 - Live 0x0000000000000000 joydev 17587 0 - Live 0x0000000000000000 wmi 19379 1 dell_wmi, Live 0x0000000000000000 serio_raw 13483 0 - Live 0x0000000000000000 video 19932 1 i915, Live 0x0000000000000000 soc_button_array 12769 0 - Live 0x0000000000000000 mac_hid 13275 0 - Live 0x0000000000000000 psmouse 113320 0 - Live 0x0000000000000000 ahci 30167 1 - Live 0x0000000000000000 libahci 32191 1 ahci, Live 0x0000000000000000 r8169 73316 0 - Live 0x0000000000000000 mii 13981 1 r8169, Live 0x0000000000000000 [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0062-0062 : EC data 0064-0064 : keyboard 0066-0066 : EC cmd 0070-0077 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 03c0-03df : vesafb 0680-069f : pnp 00:03 0cf8-0cff : PCI conf1 0d00-ffff : PCI Bus 0000:00 164e-164f : pnp 00:03 1800-1803 : ACPI PM1a_EVT_BLK 1804-1805 : ACPI PM1a_CNT_BLK 1808-180b : ACPI PM_TMR 1810-1815 : ACPI CPU throttle 1830-1833 : iTCO_wdt 1850-1850 : ACPI PM2_CNT_BLK 1854-1857 : pnp 00:05 1860-187f : iTCO_wdt 1880-189f : ACPI GPE0_BLK 3000-3fff : PCI Bus 0000:01 3000-30ff : 0000:01:00.0 3000-30ff : r8169 4000-403f : 0000:00:02.0 4040-405f : 0000:00:1f.3 4060-407f : 0000:00:1f.2 4060-407f : ahci 4080-4087 : 0000:00:1f.2 4080-4087 : ahci 4088-408f : 0000:00:1f.2 4088-408f : ahci 4090-4093 : 0000:00:1f.2 4090-4093 : ahci 4094-4097 : 0000:00:1f.2 4094-4097 : ahci fd60-fd63 : pnp 00:03 ffff-ffff : pnp 00:03 ffff-ffff : pnp 00:03 ffff-ffff : pnp 00:03 00000000-00000fff : reserved 00001000-0009d3ff : System RAM 0009d400-0009ffff : reserved 000a0000-000bffff : PCI Bus 0000:00 000c0000-000cebff : Video ROM 000cf000-000cffff : Adapter ROM 000e0000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-94d5ffff : System RAM 01000000-0177cd98 : Kernel code 0177cd99-01d1ef7f : Kernel data 01e7b000-01fe0fff : Kernel bss 94d60000-95d5ffff : reserved 95d60000-9aabefff : System RAM 9aabf000-9aebefff : reserved 9aebf000-9afbefff : ACPI Non-volatile Storage 9afbf000-9affefff : ACPI Tables 9afff000-9affffff : System RAM 9b000000-9f9fffff : reserved 9ba00000-9f9fffff : Graphics Stolen Memory 9fa00000-feafffff : PCI Bus 0000:00 9fa10000-9fa1ffff : pnp 00:08 9fa22000-9fa22fff : pnp 00:08 a0000000-afffffff : 0000:00:02.0 b0000000-b03fffff : 0000:00:02.0 b0400000-b04fffff : PCI Bus 0000:01 b0400000-b0403fff : 0000:01:00.0 b0400000-b0403fff : r8169 b0500000-b05fffff : PCI Bus 0000:02 b0500000-b0501fff : 0000:02:00.0 b0500000-b0501fff : iwlwifi b0600000-b06fffff : PCI Bus 0000:01 b0600000-b0600fff : 0000:01:00.0 b0600000-b0600fff : r8169 b0700000-b070ffff : 0000:00:14.0 b0700000-b070ffff : xhci_hcd b0710000-b0713fff : 0000:00:03.0 b0710000-b0713fff : ICH HD audio b0714000-b0717fff : 0000:00:1b.0 b0714000-b0717fff : ICH HD audio b0718000-b071801f : 0000:00:16.0 b0718000-b071801f : mei_me b0719000-b07190ff : 0000:00:1f.3 b071b000-b071b7ff : 0000:00:1f.2 b071b000-b071b7ff : ahci b071c000-b071c3ff : 0000:00:1d.0 b071c000-b071c3ff : ehci_hcd e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff] e0000000-efffffff : reserved e0000000-efffffff : pnp 00:08 fe101000-fe112fff : reserved feb00000-feb0ffff : reserved fec00000-fec00fff : reserved fec00000-fec003ff : IOAPIC 0 fed00000-fee00fff : reserved fed00000-fed003ff : HPET 0 fed10000-fed17fff : pnp 00:08 fed18000-fed18fff : pnp 00:08 fed19000-fed19fff : pnp 00:08 fed1c000-fed1ffff : pnp 00:08 fed1f410-fed1f414 : iTCO_wdt fed20000-fed3ffff : pnp 00:08 fed90000-fed93fff : pnp 00:08 fee00000-fee00fff : Local APIC ff000000-ff000fff : pnp 00:08 ffc00000-ffffffff : reserved 100000000-25f5fffff : System RAM 25f600000-25fffffff : RAM buffer [7.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09) Subsystem: Dell Device 05ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device 05ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 63 Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4122 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09) Subsystem: Dell Device 05ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 65 Region 0: Memory at b0710000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4162 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- Kernel driver in use: snd_hda_intel 00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04) (prog-if 30 [XHCI]) Subsystem: Dell Device 05ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 58 Region 0: Memory at b0700000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Address: 00000000fee0f00c Data: 41a1 Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04) Subsystem: Dell Device 05ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 61 Region 0: Memory at b0718000 (64-bit, non-prefetchable) [size=32] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 41d1 Kernel driver in use: mei_me 00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04) Subsystem: Dell Device 05ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 64 Region 0: Memory at b0714000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0f00c Data: 4152 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 3 (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: b0600000-b06fffff Prefetchable memory behind bridge: 00000000b0400000-00000000b04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #2, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4171 Capabilities: [90] Subsystem: Dell Device 05ec Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v0] #00 Capabilities: [200 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=40us PortTPowerOnTime=10us Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 4 (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: b0500000-b05fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #3, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0f00c Data: 4191 Capabilities: [90] Subsystem: Dell Device 05ec Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v0] #00 Capabilities: [200 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=40us PortTPowerOnTime=10us Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 05ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at b071c000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci-pci 00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller (rev 04) Subsystem: Dell Device 05ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich 00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 05ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 60 Region 0: I/O ports at 4088 [size=8] Region 1: I/O ports at 4094 [size=4] Region 2: I/O ports at 4080 [size=8] Region 3: I/O ports at 4090 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at b071b000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0c00c Data: 41c1 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04) Subsystem: Dell Device 05ec Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 11 Region 0: Memory at b0719000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 4040 [size=32] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) Subsystem: Dell Device 05ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 59 Region 0: I/O ports at 3000 [size=256] Region 2: Memory at b0600000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at b0400000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0800c Data: 41b1 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via message/WAKE# DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data No end tag found Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 01-00-00-00-36-4c-e0-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Kernel driver in use: r8169 02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Wireless-N 7260 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 62 Region 0: Memory at b0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0400c Data: 41e1 Capabilities: [40] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <32us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via WAKE# DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-, LTR+, OBFF Disabled LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number fc-f8-ae-ff-ff-a8-4f-9e Capabilities: [14c v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [154 v1] Vendor Specific Information: ID=cafe Rev=1 Len=014 <?> Kernel driver in use: iwlwifi [7.6.] SCSI information (from /proc/scsi/scsi) Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD10JPVX-75J Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVD+-RW GU90N Rev: A100 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi3 Channel: 00 Id: 00 Lun: 00 Vendor: Generic- Model: xD/SD/M.S. Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): 1 1136 14 149 1523 1631 22 2596 3 39 480 52 63 78 9 cpuinfo ioports meminfo slabinfo vmallocinfo 10 1144 1444 1494 1528 1640 23 26 301 40 489 53 642 787 907 crypto irq misc softirqs vmstat 100 1193 1450 1497 153 17 2323 2675 31 41 49 54 7 79 919 devices kallsyms modules stat zoneinfo 101 12 1460 15 1538 175 2357 2681 32 42 490 55 707 791 936 diskstats kcore mounts swaps 102 1209 1461 150 1541 176 2358 2682 33 43 5 56 741 8 979 dma key-users mtrr sys 103 1223 1463 1505 1562 18 2365 2683 339 436 50 564 743 81 acpi driver kmsg net sysrq-trigger 1091 13 1464 1508 1591 19 24 27 34 44 504 57 75 819 asound execdomains kpagecount pagetypeinfo sysvipc 11 1300 147 151 1597 1908 2400 28 35 45 505 572 755 848 buddyinfo fb kpageflags partitions timer_list 1109 1338 1470 1511 16 1980 2403 29 36 46 506 576 76 852 bus filesystems latency_stats sched_debug timer_stats 1113 1340 1474 1515 1601 2 2486 293 37 47 507 59 765 857 cgroups fs loadavg schedstat tty 1127 1380 1478 152 1607 20 25 2954 371 478 51 61 766 858 cmdline interrupts locks scsi uptime 1132 1395 148 1520 1625 21 2575 2973 38 48 511 62 77 861 consoles iomem mdstat self version [X.] Other notes, patches, fixes, workarounds: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1324330

2 10

[alsa-devel] [PATCH 1/3] ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651
by Oder Chiou 01 Jun '14

01 Jun '14

The patch adds the RL6231 class device shared support for RT5640, RT5645 and RT5651. The function of the DMIC clock calculation can be shared by RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- sound/soc/codecs/Kconfig | 9 +++++++ sound/soc/codecs/Makefile | 2 ++ sound/soc/codecs/rl6231.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rl6231.h | 18 +++++++++++++ sound/soc/codecs/rt5640.c | 23 ++++------------ sound/soc/codecs/rt5645.c | 22 +++------------- sound/soc/codecs/rt5651.c | 22 ++++------------ 7 files changed, 110 insertions(+), 53 deletions(-) create mode 100644 sound/soc/codecs/rl6231.c create mode 100644 sound/soc/codecs/rl6231.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4f96b97..6951381 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -402,6 +402,15 @@ config SND_SOC_PCM512x_SPI select SND_SOC_PCM512x select REGMAP_SPI +config SND_SOC_RL6231 + tristate + default y if SND_SOC_RT5640=y + default y if SND_SOC_RT5645=y + default y if SND_SOC_RT5651=y + default m if SND_SOC_RT5640=m + default m if SND_SOC_RT5645=m + default m if SND_SOC_RT5651=m + config SND_SOC_RT5631 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 1ccdaf0..d1e913a 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -60,6 +60,7 @@ snd-soc-pcm3008-objs := pcm3008.o snd-soc-pcm512x-objs := pcm512x.o snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o snd-soc-pcm512x-spi-objs := pcm512x-spi.o +snd-soc-rl6231-objs := rl6231.o snd-soc-rt5631-objs := rt5631.o snd-soc-rt5640-objs := rt5640.o snd-soc-rt5645-objs := rt5645.o @@ -216,6 +217,7 @@ obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o +obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o obj-$(CONFIG_SND_SOC_RT5645) += snd-soc-rt5645.o diff --git a/sound/soc/codecs/rl6231.c b/sound/soc/codecs/rl6231.c new file mode 100644 index 0000000..13ac551 --- /dev/null +++ b/sound/soc/codecs/rl6231.c @@ -0,0 +1,67 @@ +/* + * rl6231.c - RL6231 class device shared support + * + * Copyright 2014 Realtek Semiconductor Corp. + * + * Author: Oder Chiou <oder_chiou(a)realtek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "rl6231.h" + +/** + * rl6231_calc_dmic_clk - Calculate the parameter of dmic. + * + * @rate: base clock rate. + * + * Choose dmic clock between 1MHz and 3MHz. + * It is better for clock to approximate 3MHz. + */ +int rl6231_calc_dmic_clk(int rate) +{ + int div[] = {2, 3, 4, 6, 8, 12}, idx = -EINVAL; + int i, red, bound, temp; + + red = 3000000 * 12; + for (i = 0; i < ARRAY_SIZE(div); i++) { + bound = div[i] * 3000000; + if (rate > bound) + continue; + temp = bound - rate; + if (temp < red) { + red = temp; + idx = i; + } + } + + return idx; +} +EXPORT_SYMBOL_GPL(rl6231_calc_dmic_clk); + +MODULE_DESCRIPTION("RL6231 class device shared support"); +MODULE_AUTHOR("Oder Chiou <oder_chiou(a)realtek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/rl6231.h b/sound/soc/codecs/rl6231.h new file mode 100644 index 0000000..00032db --- /dev/null +++ b/sound/soc/codecs/rl6231.h @@ -0,0 +1,18 @@ +/* + * rl6231.h - RL6231 class device shared support + * + * Copyright 2014 Realtek Semiconductor Corp. + * + * Author: Oder Chiou <oder_chiou(a)realtek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __RL6231_H__ +#define __RL6231_H__ + +int rl6231_calc_dmic_clk(int rate); + +#endif /* __RL6231_H__ */ diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 9e0d48f..0cefc16 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -31,6 +31,7 @@ #include <sound/initval.h> #include <sound/tlv.h> +#include "rl6231.h" #include "rt5640.h" #define RT5640_DEVICE_ID 0x6231 @@ -453,30 +454,16 @@ static const struct snd_kcontrol_new rt5640_specific_snd_controls[] = { * @kcontrol: The kcontrol of this widget. * @event: Event id. * - * Choose dmic clock between 1MHz and 3MHz. - * It is better for clock to approximate 3MHz. */ static int set_dmic_clk(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); - int div[] = {2, 3, 4, 6, 8, 12}; - int idx = -EINVAL, i; - int rate, red, bound, temp; - - rate = rt5640->sysclk; - red = 3000000 * 12; - for (i = 0; i < ARRAY_SIZE(div); i++) { - bound = div[i] * 3000000; - if (rate > bound) - continue; - temp = bound - rate; - if (temp < red) { - red = temp; - idx = i; - } - } + int idx = -EINVAL; + + idx = rl6231_calc_dmic_clk(rt5640->sysclk); + if (idx < 0) dev_err(codec->dev, "Failed to set DMIC clock\n"); else diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index ab97d72..caa5519 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -26,6 +26,7 @@ #include <sound/initval.h> #include <sound/tlv.h> +#include "rl6231.h" #include "rt5645.h" #define RT5645_DEVICE_ID 0x6308 @@ -519,30 +520,15 @@ static const struct snd_kcontrol_new rt5645_snd_controls[] = { * @kcontrol: The kcontrol of this widget. * @event: Event id. * - * Choose dmic clock between 1MHz and 3MHz. - * It is better for clock to approximate 3MHz. */ static int set_dmic_clk(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; struct rt5645_priv *rt5645 = snd_soc_codec_get_drvdata(codec); - int div[] = {2, 3, 4, 6, 8, 12}; - int idx = -EINVAL, i; - int rate, red, bound, temp; - - rate = rt5645->sysclk; - red = 3000000 * 12; - for (i = 0; i < ARRAY_SIZE(div); i++) { - bound = div[i] * 3000000; - if (rate > bound) - continue; - temp = bound - rate; - if (temp < red) { - red = temp; - idx = i; - } - } + int idx = -EINVAL; + + idx = rl6231_calc_dmic_clk(rt5645->sysclk); if (idx < 0) dev_err(codec->dev, "Failed to set DMIC clock\n"); diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 9c88d89..7a7bec6 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -26,6 +26,7 @@ #include <sound/initval.h> #include <sound/tlv.h> +#include "rl6231.h" #include "rt5651.h" #define RT5651_DEVICE_ID_VALUE 0x6281 @@ -371,29 +372,16 @@ static const struct snd_kcontrol_new rt5651_snd_controls[] = { * @kcontrol: The kcontrol of this widget. * @event: Event id. * - * Choose dmic clock between 1MHz and 3MHz. - * It is better for clock to approximate 3MHz. */ static int set_dmic_clk(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; struct rt5651_priv *rt5651 = snd_soc_codec_get_drvdata(codec); - int div[] = {2, 3, 4, 6, 8, 12}, idx = -EINVAL; - int i, rate, red, bound, temp; - - rate = rt5651->sysclk; - red = 3000000 * 12; - for (i = 0; i < ARRAY_SIZE(div); i++) { - bound = div[i] * 3000000; - if (rate > bound) - continue; - temp = bound - rate; - if (temp < red) { - red = temp; - idx = i; - } - } + int idx = -EINVAL; + + idx = rl6231_calc_dmic_clk(rt5651->sysclk); + if (idx < 0) dev_err(codec->dev, "Failed to set DMIC clock\n"); else -- 1.8.1.1.439.g50a6b54

2 3

[alsa-devel] [PATCH] ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
by Xiubo Li 01 Jun '14

01 Jun '14

Since we cannot make sure the 'reg_size' will always be none zero here, and then if 'reg_size' equals to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the 'reg_size' zero check before calling kzalloc(). Signed-off-by: Xiubo Li <Li.Xiubo(a)freescale.com> --- sound/soc/soc-cache.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index 3fa77d5..8fff5b6 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -72,6 +72,9 @@ int snd_soc_cache_init(struct snd_soc_codec *codec) reg_size = codec_drv->reg_cache_size * codec_drv->reg_word_size; + if (!reg_size) + return -EINVAL; + mutex_init(&codec->cache_rw_mutex); dev_dbg(codec->dev, "ASoC: Initializing cache for %s codec\n", -- 1.8.4

2 1

[alsa-devel] [PATCH] sound: pci: ice1712: wm8766.c: Cleaning up uninitialized variables
by Rickard Strandqvist 01 Jun '14

01 Jun '14

There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist(a)spectrumdigital.se> --- sound/pci/ice1712/wm8766.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ice1712/wm8766.c b/sound/pci/ice1712/wm8766.c index 21b373b..788a31c 100644 --- a/sound/pci/ice1712/wm8766.c +++ b/sound/pci/ice1712/wm8766.c @@ -237,7 +237,7 @@ static int snd_wm8766_ctl_get(struct snd_kcontrol *kcontrol, { struct snd_wm8766 *wm = snd_kcontrol_chip(kcontrol); int n = kcontrol->private_value; - u16 val1, val2; + u16 val1 = 0, val2 = 0; if (wm->ctl[n].get) wm->ctl[n].get(wm, &val1, &val2); -- 1.7.10.4

2 1

[alsa-devel] [PATCH] bebob: Use ARRAY_SIZE() instead of sizeof() for return condition
by Takashi Sakamoto 01 Jun '14

01 Jun '14

The parser for stream format information should return when detecting wrong value for sampling rate. But it doesn't. Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- sound/firewire/bebob/bebob_stream.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c index 514c7c9..bc4f827 100644 --- a/sound/firewire/bebob/bebob_stream.c +++ b/sound/firewire/bebob/bebob_stream.c @@ -749,7 +749,7 @@ parse_stream_formation(u8 *buf, unsigned int len, if (buf[2] == bridgeco_freq_table[i]) break; } - if (i == sizeof(bridgeco_freq_table)) + if (i == ARRAY_SIZE(bridgeco_freq_table)) return -ENOSYS; /* Avoid double count by different entries for the same rate. */ -- 1.8.3.2

2 3