April 2014 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] No sound on Thinkpad T440s in Docking Station
by Joschi Brauchle 07 May '14

07 May '14

Dear all, using openSUSE 13.1 on an Thinkpad T440s, I am not getting sound once the laptop is docked to its docking station. I suspect an additional SND_PCI_QUIRK is needed for this model. "pactl list" returns ---------------- alsa.mixer_name = "Realtek ALC292" alsa.components = "HDA:10ec0292,17aa220c,00100001" ---------------- for the analog audio output sink in docked state. Hence I assume a new line *similar* to this ---------------- SND_PCI_QUIRK(0x17aa, 0x220c, "Thinkpad T440s", ALC269_FIXUP_LENOVO_DOCK), ---------------- is needed? What about the ALC292 instead of 269 Realtek chip...? Please find alsa-info.sh output attached. -- Dipl.-Ing. Joschi Brauchle, M.S. Institute for Communications Engineering (LNT) Technische Universitaet Muenchen (TUM) 80290 Munich, Germany Tel (work): +49 89 289-23474 Fax (work): +49 89 289-23490 E-mail: joschi.brauchle(a)tum.de Web: http://www.lnt.ei.tum.de/

2 15

[alsa-devel] [PATCH 0/5] ASoC: fsl_spdif: Add sysclk df support
by Nicolin Chen 05 May '14

05 May '14

This series of patches mainly add sysclk_df support to derive tx clock from sysclk, and meanwhile, accordingly do some additional improvements. Nicolin Chen (5): ASoC: fsl_spdif: Use clk_set_rate() for spdif root clock only ASoC: fsl_spdif: Rename all _div to _df ASoC: fsl_spdif: Add sysclk df support to derive txclk from sysclk ASoC: fsl_spdif: Print actual sample rate for debug ASoc: fsl_spdif: Add descriptions for fsl_spdif_priv sound/soc/fsl/fsl_spdif.c | 145 ++++++++++++++++++++++++++++++++-------------- sound/soc/fsl/fsl_spdif.h | 14 +++-- 2 files changed, 109 insertions(+), 50 deletions(-) -- 1.8.4

2 10

[alsa-devel] [PATCH] ASoC: rt5640: correct 5640's device ID
by bardliao＠realtek.com 05 May '14

05 May '14

From: Bard Liao <bardliao(a)realtek.com> This patch correct rt5640's device ID Signed-off-by: Bard Liao <bardliao(a)realtek.com> --- We will send another patch to fix the issue about the "Failed to add route" error. --- sound/soc/codecs/rt5640.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5640.h b/sound/soc/codecs/rt5640.h index ded2059..895ca14 100644 --- a/sound/soc/codecs/rt5640.h +++ b/sound/soc/codecs/rt5640.h @@ -195,7 +195,7 @@ /* SW Reset & Device ID (0x00) */ #define RT5640_ID_MASK (0x3 << 1) #define RT5640_ID_5639 (0x0 << 1) -#define RT5640_ID_5640 (0x1 << 1) +#define RT5640_ID_5640 (0x2 << 1) #define RT5640_ID_5642 (0x3 << 1) -- 1.8.1.1.439.g50a6b54

4 4

Re: [alsa-devel] [PATCH] ASoC: mc13783: Add devicetree support
by Lee Jones 03 May '14

03 May '14

> > > > This patch adds devicetree support for mc13783-codec. > > > > > > Applied, thanks. > > > > No Mark, no! > > What a problem, Lee? There's no problem with the patch, don't worry. Neither Mark, nor I can apply this patch independently, we need to create a shared branch somewhere, or we'll risk conflicts at merge time. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog

2 5

[alsa-devel] [PATCH 13/15] ASoC: SND_S3C_DMA_LEGACY needs S3C24XX_DMA
by Xia Kaixu 02 May '14

02 May '14

From: Arnd Bergmann <arnd(a)arndb.de> SND_S3C_DMA_LEGACY can only be set on S3C24xx, which does not (yet) support the dmaengine framework, so samsung_dma_get_ops() fails to link if S3C24XX_DMA is disabled: sound/built-in.o: In function `dma_hw_params': :(.text+0x7f310): undefined reference to `s3c_dma_get_ops' sound/built-in.o: In function `s3c_ac97_trigger': :(.text+0x7f7f0): undefined reference to `s3c_dma_get_ops' sound/built-in.o: In function `s3c_ac97_mic_trigger': :(.text+0x7f884): undefined reference to `s3c_dma_get_ops' sound/built-in.o: In function `s3c2412_i2s_trigger': :(.text+0x80944): undefined reference to `s3c2410_dma_ctrl' This makes sure S3C24XX_DMA is always enabled when we need it, just like we do it for the same dependency in SND_S3C24XX_I2S, which has the same problem. Selecting "S3C2410_DMA" as we did before does not actually have the intended effect, since that one is only used on the s3c2410 and s3c2442 SoCs of the s3c24xx family, but not the others, so we can remove this from Kconfig. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia(a)linaro.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Ben Dooks <ben-linux(a)fluff.org> Cc: Kukjin Kim <kgene.kim(a)samsung.com> Cc: Sangbeom Kim <sbkim73(a)samsung.com> Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-samsung-soc(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org --- sound/soc/samsung/Kconfig | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 99cc196..7b610a8 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -1,7 +1,6 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" depends on PLAT_SAMSUNG - select S3C2410_DMA if ARCH_S3C24XX select S3C64XX_PL080 if ARCH_S3C64XX select SND_S3C_DMA if !ARCH_S3C24XX select SND_S3C_DMA_LEGACY if ARCH_S3C24XX @@ -15,11 +14,11 @@ config SND_S3C_DMA tristate config SND_S3C_DMA_LEGACY + select S3C24XX_DMA tristate config SND_S3C24XX_I2S tristate - select S3C24XX_DMA config SND_S3C_I2SV2_SOC tristate @@ -27,7 +26,6 @@ config SND_S3C_I2SV2_SOC config SND_S3C2412_SOC_I2S tristate select SND_S3C_I2SV2_SOC - select S3C2410_DMA config SND_SAMSUNG_PCM tristate @@ -83,7 +81,6 @@ config SND_SOC_SAMSUNG_SMDK_WM8994 config SND_SOC_SAMSUNG_SMDK2443_WM9710 tristate "SoC AC97 Audio support for SMDK2443 - WM9710" depends on SND_SOC_SAMSUNG && MACH_SMDK2443 - select S3C2410_DMA select AC97_BUS select SND_SOC_AC97_CODEC select SND_SAMSUNG_AC97 @@ -94,7 +91,6 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710 config SND_SOC_SAMSUNG_LN2440SBC_ALC650 tristate "SoC AC97 Audio support for LN2440SBC - ALC650" depends on SND_SOC_SAMSUNG && ARCH_S3C24XX - select S3C2410_DMA select AC97_BUS select SND_SOC_AC97_CODEC select SND_SAMSUNG_AC97 -- 1.7.9.5

4 6

Re: [alsa-devel] [PATCH] ASoC: fsl: select SND_SOC_IMX_PCM_DMA where needed
by Arnd Bergmann 01 May '14

01 May '14

On Tuesday 29 April 2014 07:07:33 Alexander Shiyan wrote: > Mon, 28 Apr 2014 23:12:14 +0200 от Arnd Bergmann <arnd(a)arndb.de>: > > On Tuesday 29 April 2014 00:35:41 Alexander Shiyan wrote: > > > > > > So, I don't understand why this error happen, as well as I can not > > > reproduce this... > > > > It's probably CONFIG_SND_SOC_IMX_PCM_DMA=m and CONFIG_SND_SOC_FSL_SSI=y then. > > What is the intended behavior in this case? Should CONFIG_SND_SOC_FSL_SSI > > be forced to be a module as well? > > Hmm, yes... > I thought that I had already solved a similar problem for the earlier > version of the patch ... How about this? Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index fb26345..af0bb92 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -9,6 +9,7 @@ config SND_SOC_FSL_SAI config SND_SOC_FSL_SSI tristate "Synchronous Serial Interface module support" + depends on m || SND_SOC_IMX_PCM_DMA != m help Say Y if you want to add Synchronous Serial Interface (SSI) support for the Freescale CPUs. @@ -18,6 +19,7 @@ config SND_SOC_FSL_SSI config SND_SOC_FSL_SPDIF tristate "Sony/Philips Digital Interface module support" select REGMAP_MMIO + depends on m || SND_SOC_IMX_PCM_DMA != m help Say Y if you want to add Sony/Philips Digital Interface (SPDIF) support for the Freescale CPUs.

3 7

[alsa-devel] [PATCH 14/15] ASoC: Amstrad E3 needs TTY support for codec
by Xia Kaixu 01 May '14

01 May '14

From: Arnd Bergmann <arnd(a)arndb.de> The cx20442 codec driver used here requires the TTY layer to be enabled, or we get a link error: sound/built-in.o: In function `cx20442_codec_remove': cx20442.c:398: undefined reference to `tty_hangup' sound/built-in.o: In function `ams_delta_remove': ams-delta.c:613: undefined reference to `tty_unregister_ldisc' sound/built-in.o: In function `ams_delta_cx20442_init': ams-delta.c:559: undefined reference to `tty_register_ldisc' This adds the missing dependency in the E3 configuration, there was already one for the codec. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia(a)linaro.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Cc: Jarkko Nikula <jarkko.nikula(a)bitmer.com> Cc: linux-omap(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org --- sound/soc/omap/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 2796af9..d44463a 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -37,7 +37,7 @@ config SND_OMAP_SOC_RX51 config SND_OMAP_SOC_AMS_DELTA tristate "SoC Audio support for Amstrad E3 (Delta) videophone" - depends on SND_OMAP_SOC && MACH_AMS_DELTA + depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY select SND_OMAP_SOC_MCBSP select SND_SOC_CX20442 help -- 1.7.9.5

2 1

[alsa-devel] [PATCH 09/15] ASoC: Migo-R sound needs I2C
by Xia Kaixu 01 May '14

01 May '14

From: Arnd Bergmann <arnd(a)arndb.de> The WM8978 driver needs I2C to be enabled, so the SND_SIU_MIGOR option also requires this. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia(a)linaro.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-arm-kernel(a)lists.infradead.org --- sound/soc/sh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig index ff60e11..b43fdf0 100644 --- a/sound/soc/sh/Kconfig +++ b/sound/soc/sh/Kconfig @@ -56,7 +56,7 @@ config SND_SH7760_AC97 config SND_SIU_MIGOR tristate "SIU sound support on Migo-R" - depends on SH_MIGOR + depends on SH_MIGOR && I2C select SND_SOC_SH4_SIU select SND_SOC_WM8978 help -- 1.7.9.5

2 1

[alsa-devel] [PATCH 10/15] ASoC: TLV320AIC23 and Simtec Hermes audio
by Xia Kaixu 01 May '14

01 May '14

From: Arnd Bergmann <arnd(a)arndb.de> This codec requires I2C to be enabled, so any other option that selects it should also depend on I2C. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia(a)linaro.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Ben Dooks <ben-linux(a)fluff.org> Cc: Kukjin Kim <kgene.kim(a)samsung.com> Cc: Sangbeom Kim <sbkim73(a)samsung.com> Cc: alsa-devel(a)alsa-project.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-samsung-soc(a)vger.kernel.org --- sound/soc/samsung/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index b09b5a4..9fd6f62 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -116,14 +116,14 @@ config SND_SOC_SAMSUNG_SIMTEC config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" - depends on SND_SOC_SAMSUNG && ARCH_S3C24XX + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C select SND_S3C24XX_I2S select SND_SOC_TLV320AIC23_I2C select SND_SOC_SAMSUNG_SIMTEC config SND_SOC_SAMSUNG_SIMTEC_HERMES tristate "SoC I2S Audio support for Simtec Hermes board" - depends on SND_SOC_SAMSUNG && ARCH_S3C24XX + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C select SND_S3C24XX_I2S select SND_SOC_TLV320AIC3X select SND_SOC_SAMSUNG_SIMTEC -- 1.7.9.5

2 1

[alsa-devel] [PATCH 12/15] ASoC: Atmel WM8904 codec support needs I2C
by Xia Kaixu 01 May '14

01 May '14

From: Arnd Bergmann <arnd(a)arndb.de> The WM8904 codec driver needs I2C to be enabled, so the SND_ATMEL_SOC_WM8904 option also requires this. Found using randconfig build testing. Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia(a)linaro.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: alsa-devel(a)alsa-project.org --- sound/soc/atmel/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index 4789619..27e3fc4 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -35,7 +35,7 @@ config SND_AT91_SOC_SAM9G20_WM8731 config SND_ATMEL_SOC_WM8904 tristate "Atmel ASoC driver for boards using WM8904 codec" - depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC + depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC && I2C select SND_ATMEL_SOC_SSC select SND_ATMEL_SOC_DMA select SND_SOC_WM8904 -- 1.7.9.5

2 1