November 2014 - Alsa-devel - mailman.alsa-project.org

Re: [alsa-devel] ALSA: echoaudio: remove all snd_printk
by Dan Carpenter 04 Nov '14

04 Nov '14

Hello Sudip Mukherjee, The patch b5b4a41b3929: "ALSA: echoaudio: remove all snd_printk" from Nov 3, 2014, leads to the following static checker warning: sound/pci/echoaudio/echoaudio.c:1908 snd_echo_free() error: dereferencing freed memory 'chip' sound/pci/echoaudio/echoaudio.c 1905 /* release chip data */ 1906 free_firmware_cache(chip); 1907 kfree(chip); ^^^^^^^^^^^ 1908 dev_dbg(chip->card->dev, "Chip freed.\n"); ^^^^^^^^^^ We have lots of printks in this function. We could just delete them all and no one would care. These days you can get the same information from ftrace. 1909 return 0; 1910 } regards, dan carpenter

3 2

[alsa-devel] [PATCH] ASoC: Intel: Fix build with CONFIG_SLEEP enabled.
by Liam Girdwood 04 Nov '14

04 Nov '14

Fix the following build error when CONFIG_SLEEP is enabled and CONFIG_RUNTIME is disabled. The BDW ADSP sleep PM functionality depends on the runtime pm calls for context save/restore. All error/warnings: >> ERROR: "snd_soc_suspend" undefined! >> ERROR: "snd_soc_resume" undefined! Reported-by: kbuild test robot <fengguang.wu(a)intel.com> Signed-off-by: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> --- sound/soc/intel/sst-haswell-pcm.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/sst-haswell-pcm.c b/sound/soc/intel/sst-haswell-pcm.c index 3cb9ed7..afbcc9b 100644 --- a/sound/soc/intel/sst-haswell-pcm.c +++ b/sound/soc/intel/sst-haswell-pcm.c @@ -1011,7 +1011,6 @@ static int hsw_pcm_dev_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM #ifdef CONFIG_PM_RUNTIME static int hsw_pcm_runtime_idle(struct device *dev) @@ -1071,6 +1070,8 @@ static int hsw_pcm_runtime_resume(struct device *dev) #define hsw_pcm_runtime_resume NULL #endif +#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PM_RUNTIME) + static void hsw_pcm_complete(struct device *dev) { struct hsw_priv_data *pdata = dev_get_drvdata(dev); @@ -1166,6 +1167,11 @@ static int hsw_pcm_prepare(struct device *dev) return 0; } +#else +#define hsw_pcm_prepare NULL +#define hsw_pcm_complete NULL +#endif + static const struct dev_pm_ops hsw_pcm_pm = { .runtime_idle = hsw_pcm_runtime_idle, .runtime_suspend = hsw_pcm_runtime_suspend, @@ -1173,9 +1179,6 @@ static const struct dev_pm_ops hsw_pcm_pm = { .prepare = hsw_pcm_prepare, .complete = hsw_pcm_complete, }; -#else -#define hsw_pcm_pm NULL -#endif static struct platform_driver hsw_pcm_driver = { .driver = { -- 2.1.0

2 1

[alsa-devel] [PATCH 0/5] A few ALSA PCM core update patches
by Takashi Iwai 04 Nov '14

04 Nov '14

Hi, here is a small series of patches for cleaning up / enhancing the PCM core stuff. [PATCH 1/5] ALSA: pcm: Simplify snd_pcm_action_lock_irq() [PATCH 2/5] ALSA: pcm: Refactoring snd_pcm_action() [PATCH 3/5] ALSA: pcm: Correct PCM BUG error message [PATCH 4/5] ALSA: pcm: Replace PCM hwptr tracking with tracepoints [PATCH 5/5] ALSA: pcm: Add xrun_injection proc entry Takashi

1 5

[alsa-devel] ASoC: no dapm match for AMIC
by Fabio Estevam 04 Nov '14

04 Nov '14

Hi, I am running linux-next 20141104 on a imx6q-sabresd board and noticed the following error messages: [ 2.145602] imx-wm8962 sound: wm8962 <-> 202c000.ssi mapping ok [ 2.151654] imx-wm8962 sound: Connecting non-supply widget to supply widget is not supported (AMIC -> MICBIAS) [ 2.161710] imx-wm8962 sound: ASoC: no dapm match for AMIC --> (null) --> MICBIAS [ 2.169258] imx-wm8962 sound: ASoC: Failed to add route AMIC -> direct -> MICBIAS What would be the correct way to fix them? Thanks

2 2

[alsa-devel] [PATCH 1/2] ASoC: Remove card field from snd_soc_dai struct
by Lars-Peter Clausen 04 Nov '14

04 Nov '14

The card field of the snd_soc_dai field is very rarely used. We can use dai->component->card instead and remove the card field from the snd_soc_dai struct. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- include/sound/soc-dai.h | 2 -- sound/soc/soc-core.c | 7 +------ sound/soc/soc-dapm.c | 2 +- 3 files changed, 2 insertions(+), 9 deletions(-) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 45d0fa1..373d177 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -275,8 +275,6 @@ struct snd_soc_dai { unsigned int tx_mask; unsigned int rx_mask; - struct snd_soc_card *card; - struct list_head list; }; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 3818cf3..d9b7b70 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1315,11 +1315,6 @@ static int soc_probe_link_dais(struct snd_soc_card *card, int num, int order) dev_dbg(card->dev, "ASoC: probe %s dai link %d late %d\n", card->name, num, order); - /* config components */ - cpu_dai->card = card; - for (i = 0; i < rtd->num_codecs; i++) - rtd->codec_dais[i]->card = card; - /* set default power off timeout */ rtd->pmdown_time = pmdown_time; @@ -2314,7 +2309,7 @@ EXPORT_SYMBOL_GPL(snd_soc_add_card_controls); int snd_soc_add_dai_controls(struct snd_soc_dai *dai, const struct snd_kcontrol_new *controls, int num_controls) { - struct snd_card *card = dai->card->snd_card; + struct snd_card *card = dai->component->card->snd_card; return snd_soc_add_controls(card, dai->dev, controls, num_controls, NULL, dai); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 6bf2c97..c5136bb 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1043,7 +1043,7 @@ static int is_connected_input_ep(struct snd_soc_dapm_widget *widget, int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream, struct snd_soc_dapm_widget_list **list) { - struct snd_soc_card *card = dai->card; + struct snd_soc_card *card = dai->component->card; struct snd_soc_dapm_widget *w; int paths; -- 1.8.0

2 3

[alsa-devel] [PATCH v5 0/3] Add Phytec pbab01 audio support
by Dmitry Lavnikevich 04 Nov '14

04 Nov '14

By mistake previous patchset versions was sent as in-reply-to to previous patchset versions, so they may have been lost among other mails. One of pathces was already applied by Mark Brown, here is 3 patches implementing audio support on Phytec phyFLEX-i.MX6 boards. This patchset version only renames audio card name to OnboardTLV320AIC3007 (on request from Phytec). Patches are based on branch for-next of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

3 6

[alsa-devel] [PATCH] ASoC: rt5645: make bias level more reasonale
by bardliao＠realtek.com 04 Nov '14

04 Nov '14

From: Bard Liao <bardliao(a)realtek.com> This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao(a)realtek.com> --- sound/soc/codecs/rt5645.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index bc442f4..0e92e63 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -2071,8 +2071,8 @@ static int rt5645_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { switch (level) { - case SND_SOC_BIAS_STANDBY: - if (SND_SOC_BIAS_OFF == codec->dapm.bias_level) { + case SND_SOC_BIAS_PREPARE: + if (SND_SOC_BIAS_STANDBY == codec->dapm.bias_level) { snd_soc_update_bits(codec, RT5645_PWR_ANLG1, RT5645_PWR_VREF1 | RT5645_PWR_MB | RT5645_PWR_BG | RT5645_PWR_VREF2, @@ -2087,15 +2087,24 @@ static int rt5645_set_bias_level(struct snd_soc_codec *codec, } break; + case SND_SOC_BIAS_STANDBY: + snd_soc_update_bits(codec, RT5645_PWR_ANLG1, + RT5645_PWR_VREF1 | RT5645_PWR_MB | + RT5645_PWR_BG | RT5645_PWR_VREF2, + RT5645_PWR_VREF1 | RT5645_PWR_MB | + RT5645_PWR_BG | RT5645_PWR_VREF2); + snd_soc_update_bits(codec, RT5645_PWR_ANLG1, + RT5645_PWR_FV1 | RT5645_PWR_FV2, + RT5645_PWR_FV1 | RT5645_PWR_FV2); + break; + case SND_SOC_BIAS_OFF: snd_soc_write(codec, RT5645_DEPOP_M2, 0x1100); snd_soc_write(codec, RT5645_GEN_CTRL1, 0x0128); - snd_soc_write(codec, RT5645_PWR_DIG1, 0x0000); - snd_soc_write(codec, RT5645_PWR_DIG2, 0x0000); - snd_soc_write(codec, RT5645_PWR_VOL, 0x0000); - snd_soc_write(codec, RT5645_PWR_MIXER, 0x0000); - snd_soc_write(codec, RT5645_PWR_ANLG1, 0x0000); - snd_soc_write(codec, RT5645_PWR_ANLG2, 0x0000); + snd_soc_update_bits(codec, RT5645_PWR_ANLG1, + RT5645_PWR_VREF1 | RT5645_PWR_MB | + RT5645_PWR_BG | RT5645_PWR_VREF2 | + RT5645_PWR_FV1 | RT5645_PWR_FV2, 0x0); break; default: -- 1.8.1.1.439.g50a6b54

2 1

[alsa-devel] [PATCH] ASoC: rt286: reduce power consumption
by bardliao＠realtek.com 04 Nov '14

04 Nov '14

From: Bard Liao <bardliao(a)realtek.com> This patch will optimize the power consumption of rt286. Signed-off-by: Bard Liao <bardliao(a)realtek.com> --- sound/soc/codecs/rt286.c | 211 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 155 insertions(+), 56 deletions(-) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 4aa555c..97daa80 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -36,11 +36,13 @@ struct rt286_priv { struct regmap *regmap; + struct snd_soc_codec *codec; struct rt286_platform_data pdata; struct i2c_client *i2c; struct snd_soc_jack *jack; struct delayed_work jack_detect_work; int sys_clk; + int clk_id; struct reg_default *index_cache; }; @@ -298,7 +300,6 @@ static int rt286_support_power_controls[] = { static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic) { unsigned int val, buf; - int i; *hp = false; *mic = false; @@ -309,67 +310,44 @@ static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic) if (*hp) { /* power on HV,VERF */ regmap_update_bits(rt286->regmap, - RT286_POWER_CTRL1, 0x1001, 0x0); + RT286_DC_GAIN, 0x200, 0x200); + + snd_soc_dapm_force_enable_pin(&rt286->codec->dapm, + "HV"); + snd_soc_dapm_force_enable_pin(&rt286->codec->dapm, + "VREF"); /* power LDO1 */ - regmap_update_bits(rt286->regmap, - RT286_POWER_CTRL2, 0x4, 0x4); - regmap_write(rt286->regmap, RT286_SET_MIC1, 0x24); - regmap_read(rt286->regmap, RT286_CBJ_CTRL2, &val); + snd_soc_dapm_force_enable_pin(&rt286->codec->dapm, + "LDO1"); + snd_soc_dapm_sync(&rt286->codec->dapm); - msleep(200); - i = 40; - while (((val & 0x0800) == 0) && (i > 0)) { - regmap_read(rt286->regmap, - RT286_CBJ_CTRL2, &val); - i--; - msleep(20); - } + regmap_write(rt286->regmap, RT286_SET_MIC1, 0x24); + msleep(50); - if (0x0400 == (val & 0x0700)) { - *mic = false; + regmap_update_bits(rt286->regmap, + RT286_CBJ_CTRL1, 0xfcc0, 0xd400); + msleep(300); + regmap_read(rt286->regmap, RT286_CBJ_CTRL2, &val); - regmap_write(rt286->regmap, - RT286_SET_MIC1, 0x20); - /* power off HV,VERF */ - regmap_update_bits(rt286->regmap, - RT286_POWER_CTRL1, 0x1001, 0x1001); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL3, 0xc000, 0x0000); - regmap_update_bits(rt286->regmap, - RT286_CBJ_CTRL1, 0x0030, 0x0000); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL2, 0xc000, 0x0000); - } else if ((0x0200 == (val & 0x0700)) || - (0x0100 == (val & 0x0700))) { + if (0x0070 == (val & 0x0070)) { *mic = true; - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL3, 0xc000, 0x8000); - regmap_update_bits(rt286->regmap, - RT286_CBJ_CTRL1, 0x0030, 0x0020); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL2, 0xc000, 0x8000); } else { - *mic = false; + regmap_update_bits(rt286->regmap, + RT286_CBJ_CTRL1, 0xfcc0, 0xe400); + msleep(300); + regmap_read(rt286->regmap, + RT286_CBJ_CTRL2, &val); + if (0x0070 == (val & 0x0070)) + *mic = true; + else + *mic = false; } - - regmap_update_bits(rt286->regmap, - RT286_MISC_CTRL1, - 0x0060, 0x0000); - } else { - regmap_update_bits(rt286->regmap, - RT286_MISC_CTRL1, - 0x0060, 0x0020); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL3, - 0xc000, 0x8000); regmap_update_bits(rt286->regmap, - RT286_CBJ_CTRL1, - 0x0030, 0x0020); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL2, - 0xc000, 0x8000); + RT286_DC_GAIN, 0x200, 0x0); + } else { *mic = false; + regmap_write(rt286->regmap, RT286_SET_MIC1, 0x20); } } else { regmap_read(rt286->regmap, RT286_GET_HP_SENSE, &buf); @@ -378,6 +356,12 @@ static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic) *mic = buf & 0x80000000; } + snd_soc_dapm_disable_pin(&rt286->codec->dapm, "HV"); + snd_soc_dapm_disable_pin(&rt286->codec->dapm, "VREF"); + if (!*hp) + snd_soc_dapm_disable_pin(&rt286->codec->dapm, "LDO1"); + snd_soc_dapm_sync(&rt286->codec->dapm); + return 0; } @@ -415,6 +399,17 @@ int rt286_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) } EXPORT_SYMBOL_GPL(rt286_mic_detect); +static int is_mclk_mode(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + struct rt286_priv *rt286 = snd_soc_codec_get_drvdata(source->codec); + + if (rt286->clk_id == RT286_SCLK_S_MCLK) + return 1; + else + return 0; +} + static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -6350, 50, 0); static const DECLARE_TLV_DB_SCALE(mic_vol_tlv, 0, 1000, 0); @@ -568,7 +563,84 @@ static int rt286_adc_event(struct snd_soc_dapm_widget *w, return 0; } +static int rt286_vref_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, + RT286_CBJ_CTRL1, 0x0400, 0x0000); + mdelay(50); + break; + default: + return 0; + } + + return 0; +} + +static int rt286_ldo2_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + snd_soc_update_bits(codec, RT286_POWER_CTRL2, 0x38, 0x08); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, RT286_POWER_CTRL2, 0x38, 0x30); + break; + default: + return 0; + } + + return 0; +} + +static int rt286_mic1_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL3, 0xc000, 0x8000); + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL2, 0xc000, 0x8000); + break; + case SND_SOC_DAPM_POST_PMD: + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL3, 0xc000, 0x0000); + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL2, 0xc000, 0x0000); + break; + default: + return 0; + } + + return 0; +} + static const struct snd_soc_dapm_widget rt286_dapm_widgets[] = { + SND_SOC_DAPM_SUPPLY_S("HV", 1, RT286_POWER_CTRL1, + 12, 1, NULL, 0), + SND_SOC_DAPM_SUPPLY("VREF", RT286_POWER_CTRL1, + 0, 1, rt286_vref_event, SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_SUPPLY_S("LDO1", 1, RT286_POWER_CTRL2, + 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("LDO2", 2, RT286_POWER_CTRL1, + 13, 1, rt286_ldo2_event, SND_SOC_DAPM_PRE_PMD | + SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_SUPPLY("MCLK MODE", RT286_PLL_CTRL1, + 5, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MIC1 Input Buffer", SND_SOC_NOPM, + 0, 0, rt286_mic1_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + /* Input Lines */ SND_SOC_DAPM_INPUT("DMIC1 Pin"), SND_SOC_DAPM_INPUT("DMIC2 Pin"), @@ -642,6 +714,25 @@ static const struct snd_soc_dapm_widget rt286_dapm_widgets[] = { }; static const struct snd_soc_dapm_route rt286_dapm_routes[] = { + {"ADC 0", NULL, "MCLK MODE", is_mclk_mode}, + {"ADC 1", NULL, "MCLK MODE", is_mclk_mode}, + {"Front", NULL, "MCLK MODE", is_mclk_mode}, + {"Surround", NULL, "MCLK MODE", is_mclk_mode}, + + {"HP Power", NULL, "LDO1"}, + {"HP Power", NULL, "LDO2"}, + + {"MIC1", NULL, "LDO1"}, + {"MIC1", NULL, "LDO2"}, + {"MIC1", NULL, "HV"}, + {"MIC1", NULL, "VREF"}, + {"MIC1", NULL, "MIC1 Input Buffer"}, + + {"SPO", NULL, "LDO1"}, + {"SPO", NULL, "LDO2"}, + {"SPO", NULL, "HV"}, + {"SPO", NULL, "VREF"}, + {"DMIC1", NULL, "DMIC1 Pin"}, {"DMIC2", NULL, "DMIC2 Pin"}, {"DMIC1", NULL, "DMIC Receiver"}, @@ -880,6 +971,7 @@ static int rt286_set_dai_sysclk(struct snd_soc_dai *dai, } rt286->sys_clk = freq; + rt286->clk_id = clk_id; return 0; } @@ -915,13 +1007,18 @@ static int rt286_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_ON: mdelay(10); + snd_soc_update_bits(codec, + RT286_CBJ_CTRL1, 0x0400, 0x0400); + snd_soc_update_bits(codec, + RT286_DC_GAIN, 0x200, 0x0); + break; case SND_SOC_BIAS_STANDBY: snd_soc_write(codec, RT286_SET_AUDIO_POWER, AC_PWRST_D3); snd_soc_update_bits(codec, - RT286_DC_GAIN, 0x200, 0x0); + RT286_CBJ_CTRL1, 0x0400, 0x0000); break; default: @@ -962,6 +1059,7 @@ static int rt286_probe(struct snd_soc_codec *codec) { struct rt286_priv *rt286 = snd_soc_codec_get_drvdata(codec); + rt286->codec = codec; codec->dapm.bias_level = SND_SOC_BIAS_OFF; if (rt286->i2c->irq) { @@ -1152,7 +1250,6 @@ static int rt286_i2c_probe(struct i2c_client *i2c, if (!rt286->pdata.cbj_en) { regmap_write(rt286->regmap, RT286_CBJ_CTRL2, 0x0000); regmap_write(rt286->regmap, RT286_MIC1_DET_CTRL, 0x0816); - regmap_write(rt286->regmap, RT286_MISC_CTRL1, 0x0000); regmap_update_bits(rt286->regmap, RT286_CBJ_CTRL1, 0xf000, 0xb000); } else { @@ -1169,8 +1266,10 @@ static int rt286_i2c_probe(struct i2c_client *i2c, mdelay(10); - /*Power down LDO2*/ - regmap_update_bits(rt286->regmap, RT286_POWER_CTRL2, 0x8, 0x0); + regmap_write(rt286->regmap, RT286_MISC_CTRL1, 0x0000); + /*Power down LDO, VREF*/ + regmap_update_bits(rt286->regmap, RT286_POWER_CTRL2, 0xc, 0x0); + regmap_update_bits(rt286->regmap, RT286_POWER_CTRL1, 0x1001, 0x1001); /*Set depop parameter*/ regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL2, 0x403a, 0x401a); -- 1.8.1.1.439.g50a6b54

3 3

[alsa-devel] [PATCH TINYCOMPRESS][RESEND] makefile.linux: allow env to override CROSS_COMPILE and CC
by Qais Yousef 04 Nov '14

04 Nov '14

allow env variables to override them without having to modify the makefile. Signed-off-by: Qais Yousef <qais.yousef(a)imgtec.com> --- I'm not sure why but I think the first send didn't reach the list, hence resending. makefile.linux | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/makefile.linux b/makefile.linux index 81782d0af461..c4dab6d3b7d5 100644 --- a/makefile.linux +++ b/makefile.linux @@ -9,8 +9,8 @@ LIBOBJ = ${LIBSRC:.c=.o} PLAYOBJ = ${PLAYSRC:.c=.o} RECOBJ = ${RECSRC:.c=.o} -CC = gcc -CROSS_COMPILE = +CROSS_COMPILE ?= +CC ?= ${CROSS_COMPILE}gcc CFLAGS += -std=c99 -Wall -Wextra -Wunused -DVERSION=\"${VER}\" -I./include LDFLAGS += -L. -ltinycompress @@ -20,19 +20,19 @@ all: libtinycompress cplay crec $(LIB): ${LIBOBJ} @echo " LD "$@ - @${CROSS_COMPILE}${CC} ${CFLAGS} -shared -Wl,-soname,$@.so -o $@.so ${LIBOBJ} ${LIBLDFLAGS} + @${CC} ${CFLAGS} -shared -Wl,-soname,$@.so -o $@.so ${LIBOBJ} ${LIBLDFLAGS} $(PLAYBIN): ${PLAYOBJ} ${LIB} @echo " LD "$@ - @${CROSS_COMPILE}${CC} ${CFLAGS} -o $@ ${PLAYOBJ} ${LDFLAGS} + @${CC} ${CFLAGS} -o $@ ${PLAYOBJ} ${LDFLAGS} $(RECBIN): ${RECOBJ} ${LIB} @echo " LD "$@ - @${CROSS_COMPILE}${CC} ${CFLAGS} -o $@ ${RECOBJ} ${LDFLAGS} + @${CC} ${CFLAGS} -o $@ ${RECOBJ} ${LDFLAGS} %.o: %.c @echo " CC "$< - @${CROSS_COMPILE}${CC} ${CFLAGS} -c -fPIC -o $@ $< + @${CC} ${CFLAGS} -c -fPIC -o $@ $< clean: @rm -rf ${BIN} ${PLAYOBJ} ${RECOBJ} ${LIB}.so ${LIBOBJ} -- 2.1.0

1 0

[alsa-devel] [PATCH v2] snd-es18xx: Add GPO controls
by Ondrej Zary 04 Nov '14

04 Nov '14

Add GPO0 and GPO1 (General Purpose Outputs) controls to mixer. These can be used on some cards to control amplifier mute (seen in ES1868 datasheet) or additional onboard chips such as QX2130 QXpander processor. These GPOs are present on ES1868, ES1869, ES1887 and ES1888 chips. Tested on ES1868 with QX2130. Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- sound/isa/es18xx.c | 52 ++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 42 insertions(+), 10 deletions(-) diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 6faaac6..0ead1c8 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -156,6 +156,7 @@ struct snd_es18xx { #define ES18XX_I2S 0x0200 /* I2S mixer control */ #define ES18XX_MUTEREC 0x0400 /* Record source can be muted */ #define ES18XX_CONTROL 0x0800 /* Has control ports */ +#define ES18XX_GPO_2BIT 0x1000 /* GPO0,1 controlled by PM port */ /* Power Management */ #define ES18XX_PM 0x07 @@ -1136,11 +1137,14 @@ static int snd_es18xx_reg_read(struct snd_es18xx *chip, unsigned char reg) return snd_es18xx_read(chip, reg); } -#define ES18XX_SINGLE(xname, xindex, reg, shift, mask, invert) \ +#define ES18XX_SINGLE(xname, xindex, reg, shift, mask, flags) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ .info = snd_es18xx_info_single, \ .get = snd_es18xx_get_single, .put = snd_es18xx_put_single, \ - .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) } + .private_value = reg | (shift << 8) | (mask << 16) | (flags << 24) } + +#define ES18XX_FL_INVERT (1 << 0) +#define ES18XX_FL_PMPORT (1 << 1) static int snd_es18xx_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -1159,10 +1163,14 @@ static int snd_es18xx_get_single(struct snd_kcontrol *kcontrol, struct snd_ctl_e int reg = kcontrol->private_value & 0xff; int shift = (kcontrol->private_value >> 8) & 0xff; int mask = (kcontrol->private_value >> 16) & 0xff; - int invert = (kcontrol->private_value >> 24) & 0xff; + int invert = (kcontrol->private_value >> 24) & ES18XX_FL_INVERT; + int pm_port = (kcontrol->private_value >> 24) & ES18XX_FL_PMPORT; int val; - - val = snd_es18xx_reg_read(chip, reg); + + if (pm_port) + val = inb(chip->port + ES18XX_PM); + else + val = snd_es18xx_reg_read(chip, reg); ucontrol->value.integer.value[0] = (val >> shift) & mask; if (invert) ucontrol->value.integer.value[0] = mask - ucontrol->value.integer.value[0]; @@ -1175,7 +1183,8 @@ static int snd_es18xx_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_e int reg = kcontrol->private_value & 0xff; int shift = (kcontrol->private_value >> 8) & 0xff; int mask = (kcontrol->private_value >> 16) & 0xff; - int invert = (kcontrol->private_value >> 24) & 0xff; + int invert = (kcontrol->private_value >> 24) & ES18XX_FL_INVERT; + int pm_port = (kcontrol->private_value >> 24) & ES18XX_FL_PMPORT; unsigned char val; val = (ucontrol->value.integer.value[0] & mask); @@ -1183,6 +1192,15 @@ static int snd_es18xx_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_e val = mask - val; mask <<= shift; val <<= shift; + if (pm_port) { + unsigned char cur = inb(chip->port + ES18XX_PM); + + if ((cur & mask) == val) + return 0; + outb((cur & ~mask) | val, chip->port + ES18XX_PM); + return 1; + } + return snd_es18xx_reg_bits(chip, reg, mask, val) != val; } @@ -1304,7 +1322,7 @@ static struct snd_kcontrol_new snd_es18xx_opt_speaker = ES18XX_SINGLE("Beep Playback Volume", 0, 0x3c, 0, 7, 0); static struct snd_kcontrol_new snd_es18xx_opt_1869[] = { -ES18XX_SINGLE("Capture Switch", 0, 0x1c, 4, 1, 1), +ES18XX_SINGLE("Capture Switch", 0, 0x1c, 4, 1, ES18XX_FL_INVERT), ES18XX_SINGLE("Video Playback Switch", 0, 0x7f, 0, 1, 0), ES18XX_DOUBLE("Mono Playback Volume", 0, 0x6d, 0x6d, 4, 0, 15, 0), ES18XX_DOUBLE("Mono Capture Volume", 0, 0x6f, 0x6f, 4, 0, 15, 0) @@ -1363,6 +1381,11 @@ static struct snd_kcontrol_new snd_es18xx_hw_volume_controls[] = { ES18XX_SINGLE("Hardware Master Volume Split", 0, 0x64, 7, 1, 0), }; +static struct snd_kcontrol_new snd_es18xx_opt_gpo_2bit[] = { +ES18XX_SINGLE("GPO0 Switch", 0, ES18XX_PM, 0, 1, ES18XX_FL_PMPORT), +ES18XX_SINGLE("GPO1 Switch", 0, ES18XX_PM, 1, 1, ES18XX_FL_PMPORT), +}; + static int snd_es18xx_config_read(struct snd_es18xx *chip, unsigned char reg) { int data; @@ -1629,10 +1652,10 @@ static int snd_es18xx_probe(struct snd_es18xx *chip, switch (chip->version) { case 0x1868: - chip->caps = ES18XX_DUPLEX_MONO | ES18XX_DUPLEX_SAME | ES18XX_CONTROL; + chip->caps = ES18XX_DUPLEX_MONO | ES18XX_DUPLEX_SAME | ES18XX_CONTROL | ES18XX_GPO_2BIT; break; case 0x1869: - chip->caps = ES18XX_PCM2 | ES18XX_SPATIALIZER | ES18XX_RECMIX | ES18XX_NEW_RATE | ES18XX_AUXB | ES18XX_MONO | ES18XX_MUTEREC | ES18XX_CONTROL | ES18XX_HWV; + chip->caps = ES18XX_PCM2 | ES18XX_SPATIALIZER | ES18XX_RECMIX | ES18XX_NEW_RATE | ES18XX_AUXB | ES18XX_MONO | ES18XX_MUTEREC | ES18XX_CONTROL | ES18XX_HWV | ES18XX_GPO_2BIT; break; case 0x1878: chip->caps = ES18XX_DUPLEX_MONO | ES18XX_DUPLEX_SAME | ES18XX_I2S | ES18XX_CONTROL; @@ -1642,7 +1665,7 @@ static int snd_es18xx_probe(struct snd_es18xx *chip, break; case 0x1887: case 0x1888: - chip->caps = ES18XX_PCM2 | ES18XX_RECMIX | ES18XX_AUXB | ES18XX_DUPLEX_SAME; + chip->caps = ES18XX_PCM2 | ES18XX_RECMIX | ES18XX_AUXB | ES18XX_DUPLEX_SAME | ES18XX_GPO_2BIT; break; default: snd_printk(KERN_ERR "[0x%lx] unsupported chip ES%x\n", @@ -1944,6 +1967,15 @@ static int snd_es18xx_mixer(struct snd_card *card) return err; } } + if (chip->caps & ES18XX_GPO_2BIT) { + for (idx = 0; idx < ARRAY_SIZE(snd_es18xx_opt_gpo_2bit); idx++) { + err = snd_ctl_add(card, + snd_ctl_new1(&snd_es18xx_opt_gpo_2bit[idx], + chip)); + if (err < 0) + return err; + } + } return 0; } -- Ondrej Zary

2 1