May 2013 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH -next] ASoC: mid-x86: add missing iounmap() to probe error and remove
by Wei Yongjun 13 May '13

13 May '13

From: Wei Yongjun <yongjun_wei(a)trendmicro.com.cn> Add the missing iounmap() before return from snd_mfld_mc_probe() in the error handling case and to snd_mfld_mc_remove(). Signed-off-by: Wei Yongjun <yongjun_wei(a)trendmicro.com.cn> --- sound/soc/mid-x86/mfld_machine.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/mid-x86/mfld_machine.c b/sound/soc/mid-x86/mfld_machine.c index 78d5825..8206e84 100644 --- a/sound/soc/mid-x86/mfld_machine.c +++ b/sound/soc/mid-x86/mfld_machine.c @@ -397,7 +397,7 @@ static int snd_mfld_mc_probe(struct platform_device *pdev) IRQF_SHARED, pdev->dev.driver->name, mc_drv_ctx); if (ret_val) { pr_err("cannot register IRQ\n"); - goto unalloc; + goto unmap; } /* register the soc card */ snd_soc_card_mfld.dev = &pdev->dev; @@ -412,6 +412,8 @@ static int snd_mfld_mc_probe(struct platform_device *pdev) freeirq: free_irq(irq, mc_drv_ctx); +unmap: + iounmap(mc_drv_ctx->int_base); unalloc: kfree(mc_drv_ctx); return ret_val; @@ -424,6 +426,7 @@ static int snd_mfld_mc_remove(struct platform_device *pdev) pr_debug("snd_mfld_mc_remove called\n"); free_irq(platform_get_irq(pdev, 0), mc_drv_ctx); snd_soc_unregister_card(&snd_soc_card_mfld); + iounmap(mc_drv_ctx->int_base); kfree(mc_drv_ctx); return 0; }

2 1

[alsa-devel] [PATCH 0/5] Power-well API implementation for Haswell
by Wang Xingchao 13 May '13

13 May '13

This patchset intended to Add power-well api support for Haswell. For Intel Haswell , “power well” in GPU has impact for both Display HD-A controller and codecs. Gfx driver has power well feature enaled but donot think much about audio side. The issue is if gfx driver disabled power well, audio side would lose power and crash. David helped a initial patch to add external module patch_hdmi_i915, which built in only DRM_I915 and HDMI_CODEC enabled, This patchset was based on David’s work, thanks David! As codec depends on controller’s power, so we removed the pm callback temporary. So only HDA controller driver would such need to request/release power, the codec will always be safe. Gfx driver would shutdown power well in below cases, audio driver would be damaged as losing power totally without any notification. (There would be more cases not covered, welcome more comments here. i can verify the patchset under more cases) - Only eDP port active - HDMI monitor hot plug - System suspend Also there’re some calling from i915 to disable power well from time to time, this patchset would reject those operations if audio using power well, but it will record i915 driver’s request and shut down power if audio release it. Basically, here's the latest working status on my side: I tested the power well feature on Haswell ULT board, there's only one eDP port used. Without this patch and we enabled power well feature, gfx driver will shutdown power well, audio driver will crash. Applied this patch, display audio driver will request power well on before initialize the card. In gfx side, it will enable power well. Also power_save feature in audio side should be enabled, I set "5" second to let codec enter suspend when free for 5s long. Audio controller driver detects all codecs are suspended it will release power well and suspend too. Gfx driver will receive the request and shut down power well. If user trigger some audio operations(cat codec# info), audio controller driver will request power well again... If gfx side decided to disable power well now, while audio is in use, power well would be kept on. (i will send out a documentation which has some logs and analysis there.) Generally audio drvier will request power well on need and release it immediately after suspend. Gfx should make decision at his side. The new introduced module "hda-i915" has dependency on i915, only built in when i915 enabled. So it's safe for call. For non-Haswell platform, power well is no need atm. Even the module is built in wrongly, hda driver will not call the power well api. Also gfx will reject power well request at its side, so it's safe too. This patch could make sure it would not cause damage when snd-hda-intel and i915 module loaded in any order. If i915 module loaded at first, it's safe to get the symbol. If snd-hda-intel loaded first, it will try to load i915 manually and get notification when the power-well api are exported. Wang Xingchao (5): drm/915: Add private api for power well usage ALSA: hda - Add external module hda-i915 for power well ALSA: hda - Power well request/release for hda controller ALSA: hda - Fix module dependency with gfx i915 ALSA/i915: Check power well API existense before calling drivers/gpu/drm/i915/i915_dma.c | 3 + drivers/gpu/drm/i915/intel_drv.h | 2 + drivers/gpu/drm/i915/intel_pm.c | 139 ++++++++++++++++++++++++++++++++++++-- include/drm/i915_powerwell.h | 40 +++++++++++ sound/pci/hda/Kconfig | 13 ++++ sound/pci/hda/Makefile | 6 ++ sound/pci/hda/hda_i915.c | 92 +++++++++++++++++++++++++ sound/pci/hda/hda_i915.h | 15 ++++ sound/pci/hda/hda_intel.c | 22 ++++++ 9 files changed, 325 insertions(+), 7 deletions(-) create mode 100644 include/drm/i915_powerwell.h create mode 100644 sound/pci/hda/hda_i915.c create mode 100644 sound/pci/hda/hda_i915.h -- 1.7.9.5

5 21

[alsa-devel] [PATCH v2] ASoC: mxs: move to use generic DMA helper
by Shawn Guo 13 May '13

13 May '13

With mxs-dma converted to generic DMA bindings, let's move mxs-pcm to use it by removing flages SND_DMAENGINE_PCM_FLAG_NO_DT and SND_DMAENGINE_PCM_FLAG_COMPAT. As the result, those mxs custom dma params code can be removed now. Signed-off-by: Shawn Guo <shawn.guo(a)linaro.org> --- Changes since v1: * rebase against Mark's topic/mxs branch .../devicetree/bindings/sound/mxs-saif.txt | 17 ++++++++---- sound/soc/mxs/mxs-pcm.c | 18 ------------ sound/soc/mxs/mxs-pcm.h | 7 ----- sound/soc/mxs/mxs-saif.c | 29 +------------------- sound/soc/mxs/mxs-saif.h | 1 - 5 files changed, 12 insertions(+), 60 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt index c37ba61..7ba07a1 100644 --- a/Documentation/devicetree/bindings/sound/mxs-saif.txt +++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt @@ -3,8 +3,11 @@ Required properties: - compatible: Should be "fsl,<chip>-saif" - reg: Should contain registers location and length -- interrupts: Should contain ERROR and DMA interrupts -- fsl,saif-dma-channel: APBX DMA channel for the SAIF +- interrupts: Should contain ERROR interrupt number +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and SAIF DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Optional properties: - fsl,saif-master: phandle to the master SAIF. It's only required for @@ -23,14 +26,16 @@ aliases { saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 2000>; - interrupts = <59 80>; - fsl,saif-dma-channel = <4>; + interrupts = <59>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; reg = <0x80046000 2000>; - interrupts = <58 81>; - fsl,saif-dma-channel = <5>; + interrupts = <58>; + dmas = <&dma_apbx 5>; + dma-names = "rx-tx"; fsl,saif-master = <&saif0>; }; diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index b41fffc..b16abbb 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -49,24 +49,8 @@ static const struct snd_pcm_hardware snd_mxs_hardware = { .fifo_size = 32, }; -static bool filter(struct dma_chan *chan, void *param) -{ - struct mxs_pcm_dma_params *dma_params = param; - - if (!mxs_dma_is_apbx(chan)) - return false; - - if (chan->chan_id != dma_params->chan_num) - return false; - - chan->private = &dma_params->dma_data; - - return true; -} - static const struct snd_dmaengine_pcm_config mxs_dmaengine_pcm_config = { .pcm_hardware = &snd_mxs_hardware, - .compat_filter_fn = filter, .prealloc_buffer_size = 64 * 1024, }; @@ -74,8 +58,6 @@ int mxs_pcm_platform_register(struct device *dev) { return snd_dmaengine_pcm_register(dev, &mxs_dmaengine_pcm_config, SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | - SND_DMAENGINE_PCM_FLAG_NO_DT | - SND_DMAENGINE_PCM_FLAG_COMPAT | SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX); } EXPORT_SYMBOL_GPL(mxs_pcm_platform_register); diff --git a/sound/soc/mxs/mxs-pcm.h b/sound/soc/mxs/mxs-pcm.h index 3aa918f..bc685b6 100644 --- a/sound/soc/mxs/mxs-pcm.h +++ b/sound/soc/mxs/mxs-pcm.h @@ -19,13 +19,6 @@ #ifndef _MXS_PCM_H #define _MXS_PCM_H -#include <linux/fsl/mxs-dma.h> - -struct mxs_pcm_dma_params { - struct mxs_dma_data dma_data; - int chan_num; -}; - int mxs_pcm_platform_register(struct device *dev); void mxs_pcm_platform_unregister(struct device *dev); diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 71a972f..49d8700 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -26,7 +26,6 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/time.h> -#include <linux/fsl/mxs-dma.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -604,8 +603,6 @@ static int mxs_saif_dai_probe(struct snd_soc_dai *dai) struct mxs_saif *saif = dev_get_drvdata(dai->dev); snd_soc_dai_set_drvdata(dai, saif); - dai->playback_dma_data = &saif->dma_param; - dai->capture_dma_data = &saif->dma_param; return 0; } @@ -664,7 +661,7 @@ static irqreturn_t mxs_saif_irq(int irq, void *dev_id) static int mxs_saif_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct resource *iores, *dmares; + struct resource *iores; struct mxs_saif *saif; int ret = 0; struct device_node *master; @@ -719,22 +716,6 @@ static int mxs_saif_probe(struct platform_device *pdev) if (IS_ERR(saif->base)) return PTR_ERR(saif->base); - dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!dmares) { - /* - * TODO: This is a temporary solution and should be changed - * to use generic DMA binding later when the helplers get in. - */ - ret = of_property_read_u32(np, "fsl,saif-dma-channel", - &saif->dma_param.chan_num); - if (ret) { - dev_err(&pdev->dev, "failed to get dma channel\n"); - return ret; - } - } else { - saif->dma_param.chan_num = dmares->start; - } - saif->irq = platform_get_irq(pdev, 0); if (saif->irq < 0) { ret = saif->irq; @@ -751,14 +732,6 @@ static int mxs_saif_probe(struct platform_device *pdev) return ret; } - saif->dma_param.dma_data.chan_irq = platform_get_irq(pdev, 1); - if (saif->dma_param.dma_data.chan_irq < 0) { - ret = saif->dma_param.dma_data.chan_irq; - dev_err(&pdev->dev, "failed to get dma irq resource: %d\n", - ret); - return ret; - } - platform_set_drvdata(pdev, saif); ret = snd_soc_register_component(&pdev->dev, &mxs_saif_component, diff --git a/sound/soc/mxs/mxs-saif.h b/sound/soc/mxs/mxs-saif.h index 3cb342e..53eaa4b 100644 --- a/sound/soc/mxs/mxs-saif.h +++ b/sound/soc/mxs/mxs-saif.h @@ -117,7 +117,6 @@ struct mxs_saif { unsigned int mclk_in_use; void __iomem *base; int irq; - struct mxs_pcm_dma_params dma_param; unsigned int id; unsigned int master_id; unsigned int cur_rate; -- 1.7.9.5

2 1

[alsa-devel] ASOC bug? maybe no need to set bias_level to PREPARE.
by Zhang, Ning A 13 May '13

13 May '13

When I try to fix wm1811 standby issue for our customer, I find a strange behavior in ASOC core. here is my test code: snd_soc_dapm_disable_pin(&dapm,"MICBIAS2"); snd_soc_dapm_disable_pin(&dapm,"CLK_SYS"); snd_soc_dapm_sync(&dapm); and add debug info in dapm_pre_sequence_async() and we will find these debug info printed: d->bias_level = 1 d->target_bias_level = 0 in snd_soc_dapm_set_bias_level from the debug log, when STANDBY -> OFF transition, it set bias_level to PREPARE. that's wrong logic. And more there is comment in source code: /* Prepare for a STADDBY->ON or ON->STANDBY transition */ But, the code isn't the same as the comment. ---- >From 58d8994bdc543909e9904b8df0787afc36684283 Mon Sep 17 00:00:00 2001 From: ning.a.zhang <ning.a.zhang(a)intel.com> Date: Fri, 10 May 2013 09:44:06 +0700 Subject: [PATCH] Asoc dapm behavior fix in soc_dapm.c, there is a illogic behavior, when bias_level from STANDBY -> OFF transition. source does not follow its comment. this patch is based on the comment Signed-off-by: ning.a.zhang <ning.a.zhang(a)intel.com> --- sound/soc/soc-dapm.c | 14 ++++++++++++-- 1 files changed, 12 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index d6d9ba2..834ab4c 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1486,8 +1486,9 @@ static void dapm_pre_sequence_async(void *data, async_cookie_t cookie) "ASoC: Failed to turn on bias: %d\n", ret); } - /* Prepare for a STADDBY->ON or ON->STANDBY transition */ - if (d->bias_level != d->target_bias_level) { + /* If we're on and we're not supposed to be go into PREPARE */ + if (d->bias_level == SND_SOC_BIAS_ON && + d->target_bias_level != SND_SOC_BIAS_ON) { ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_PREPARE); if (ret != 0) dev_err(d->dev, @@ -1525,6 +1526,15 @@ static void dapm_post_sequence_async(void *data, async_cookie_t cookie) pm_runtime_put(d->dev); } + if (d->bias_level == SND_SOC_BIAS_STANDBY && + (d->target_bias_level == SND_SOC_BIAS_PREPARE || + d->target_bias_level == SND_SOC_BIAS_ON)) { + ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_PREPARE); + if (ret != 0) + dev_err(d->dev, "ASoC: Failed to apply prepare bias: %d\n", + ret); + } + /* If we just powered up then move to active bias */ if (d->bias_level == SND_SOC_BIAS_PREPARE && d->target_bias_level == SND_SOC_BIAS_ON) { -- 1.7.1

2 1

[alsa-devel] [PATCH] ASoC: wm8994: Support EFS mode for FLL
by Mark Brown 13 May '13

13 May '13

Later WM8994 devices support an enhanced accuracy FLL divisor mode called EFS which allows more precise selection of fractional source to output ratios. Support this on relevant devices. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 49 +++++++++++++++++++++++++++++++++------------ 1 file changed, 36 insertions(+), 13 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 1eb152c..9f32dd8 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pm.h> +#include <linux/gcd.h> #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> @@ -2005,15 +2006,16 @@ struct fll_div { u16 outdiv; u16 n; u16 k; + u16 lambda; u16 clk_ref_div; u16 fll_fratio; }; -static int wm8994_get_fll_config(struct fll_div *fll, +static int wm8994_get_fll_config(struct wm8994 *control, struct fll_div *fll, int freq_in, int freq_out) { u64 Kpart; - unsigned int K, Ndiv, Nmod; + unsigned int K, Ndiv, Nmod, gcd_fll; pr_debug("FLL input=%dHz, output=%dHz\n", freq_in, freq_out); @@ -2062,20 +2064,30 @@ static int wm8994_get_fll_config(struct fll_div *fll, Nmod = freq_out % freq_in; pr_debug("Nmod=%d\n", Nmod); - /* Calculate fractional part - scale up so we can round. */ - Kpart = FIXED_FLL_SIZE * (long long)Nmod; + switch (control->type) { + case WM8994: + /* Calculate fractional part - scale up so we can round. */ + Kpart = FIXED_FLL_SIZE * (long long)Nmod; - do_div(Kpart, freq_in); + do_div(Kpart, freq_in); - K = Kpart & 0xFFFFFFFF; + K = Kpart & 0xFFFFFFFF; - if ((K % 10) >= 5) - K += 5; + if ((K % 10) >= 5) + K += 5; - /* Move down to proper range now rounding is done */ - fll->k = K / 10; + /* Move down to proper range now rounding is done */ + fll->k = K / 10; - pr_debug("N=%x K=%x\n", fll->n, fll->k); + pr_debug("N=%x K=%x\n", fll->n, fll->k); + + default: + gcd_fll = gcd(freq_out, freq_in); + + fll->k = (freq_out - (freq_in * fll->n)) / gcd_fll; + fll->lambda = freq_in / gcd_fll; + + } return 0; } @@ -2139,9 +2151,9 @@ static int _wm8994_set_fll(struct snd_soc_codec *codec, int id, int src, * analysis bugs spewing warnings. */ if (freq_out) - ret = wm8994_get_fll_config(&fll, freq_in, freq_out); + ret = wm8994_get_fll_config(control, &fll, freq_in, freq_out); else - ret = wm8994_get_fll_config(&fll, wm8994->fll[id].in, + ret = wm8994_get_fll_config(control, &fll, wm8994->fll[id].in, wm8994->fll[id].out); if (ret < 0) return ret; @@ -2186,6 +2198,17 @@ static int _wm8994_set_fll(struct snd_soc_codec *codec, int id, int src, WM8994_FLL1_N_MASK, fll.n << WM8994_FLL1_N_SHIFT); + if (fll.lambda) { + snd_soc_update_bits(codec, WM8958_FLL1_EFS_1 + reg_offset, + WM8958_FLL1_LAMBDA_MASK, + fll.lambda); + snd_soc_update_bits(codec, WM8958_FLL1_EFS_2 + reg_offset, + WM8958_FLL1_EFS_ENA, WM8958_FLL1_EFS_ENA); + } else { + snd_soc_update_bits(codec, WM8958_FLL1_EFS_2 + reg_offset, + WM8958_FLL1_EFS_ENA, 0); + } + snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_5 + reg_offset, WM8994_FLL1_FRC_NCO | WM8958_FLL1_BYP | WM8994_FLL1_REFCLK_DIV_MASK | -- 1.7.10.4

1 0

[alsa-devel] [PATCH] ASoC: mxs: move to use generic DMA helper
by Shawn Guo 13 May '13

13 May '13

With mxs-dma converted to generic DMA bindings, let's move mxs-pcm to use it by removing flages SND_DMAENGINE_PCM_FLAG_NO_DT and SND_DMAENGINE_PCM_FLAG_COMPAT. As the result, those mxs custom dma params code can be removed now. Signed-off-by: Shawn Guo <shawn.guo(a)linaro.org> --- .../devicetree/bindings/sound/mxs-saif.txt | 17 ++++++++---- sound/soc/mxs/mxs-pcm.c | 18 ------------ sound/soc/mxs/mxs-pcm.h | 7 ----- sound/soc/mxs/mxs-saif.c | 29 +------------------- sound/soc/mxs/mxs-saif.h | 1 - 5 files changed, 12 insertions(+), 60 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt index c37ba61..7ba07a1 100644 --- a/Documentation/devicetree/bindings/sound/mxs-saif.txt +++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt @@ -3,8 +3,11 @@ Required properties: - compatible: Should be "fsl,<chip>-saif" - reg: Should contain registers location and length -- interrupts: Should contain ERROR and DMA interrupts -- fsl,saif-dma-channel: APBX DMA channel for the SAIF +- interrupts: Should contain ERROR interrupt number +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and SAIF DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Optional properties: - fsl,saif-master: phandle to the master SAIF. It's only required for @@ -23,14 +26,16 @@ aliases { saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 2000>; - interrupts = <59 80>; - fsl,saif-dma-channel = <4>; + interrupts = <59>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; reg = <0x80046000 2000>; - interrupts = <58 81>; - fsl,saif-dma-channel = <5>; + interrupts = <58>; + dmas = <&dma_apbx 5>; + dma-names = "rx-tx"; fsl,saif-master = <&saif0>; }; diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index b41fffc..b16abbb 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -49,24 +49,8 @@ static const struct snd_pcm_hardware snd_mxs_hardware = { .fifo_size = 32, }; -static bool filter(struct dma_chan *chan, void *param) -{ - struct mxs_pcm_dma_params *dma_params = param; - - if (!mxs_dma_is_apbx(chan)) - return false; - - if (chan->chan_id != dma_params->chan_num) - return false; - - chan->private = &dma_params->dma_data; - - return true; -} - static const struct snd_dmaengine_pcm_config mxs_dmaengine_pcm_config = { .pcm_hardware = &snd_mxs_hardware, - .compat_filter_fn = filter, .prealloc_buffer_size = 64 * 1024, }; @@ -74,8 +58,6 @@ int mxs_pcm_platform_register(struct device *dev) { return snd_dmaengine_pcm_register(dev, &mxs_dmaengine_pcm_config, SND_DMAENGINE_PCM_FLAG_NO_RESIDUE | - SND_DMAENGINE_PCM_FLAG_NO_DT | - SND_DMAENGINE_PCM_FLAG_COMPAT | SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX); } EXPORT_SYMBOL_GPL(mxs_pcm_platform_register); diff --git a/sound/soc/mxs/mxs-pcm.h b/sound/soc/mxs/mxs-pcm.h index 3aa918f..bc685b6 100644 --- a/sound/soc/mxs/mxs-pcm.h +++ b/sound/soc/mxs/mxs-pcm.h @@ -19,13 +19,6 @@ #ifndef _MXS_PCM_H #define _MXS_PCM_H -#include <linux/fsl/mxs-dma.h> - -struct mxs_pcm_dma_params { - struct mxs_dma_data dma_data; - int chan_num; -}; - int mxs_pcm_platform_register(struct device *dev); void mxs_pcm_platform_unregister(struct device *dev); diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index d31dc52..d8c9a19 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -26,7 +26,6 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/time.h> -#include <linux/fsl/mxs-dma.h> #include <linux/pinctrl/consumer.h> #include <sound/core.h> #include <sound/pcm.h> @@ -605,8 +604,6 @@ static int mxs_saif_dai_probe(struct snd_soc_dai *dai) struct mxs_saif *saif = dev_get_drvdata(dai->dev); snd_soc_dai_set_drvdata(dai, saif); - dai->playback_dma_data = &saif->dma_param; - dai->capture_dma_data = &saif->dma_param; return 0; } @@ -665,7 +662,7 @@ static irqreturn_t mxs_saif_irq(int irq, void *dev_id) static int mxs_saif_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct resource *iores, *dmares; + struct resource *iores; struct mxs_saif *saif; struct pinctrl *pinctrl; int ret = 0; @@ -727,22 +724,6 @@ static int mxs_saif_probe(struct platform_device *pdev) if (IS_ERR(saif->base)) return PTR_ERR(saif->base); - dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!dmares) { - /* - * TODO: This is a temporary solution and should be changed - * to use generic DMA binding later when the helplers get in. - */ - ret = of_property_read_u32(np, "fsl,saif-dma-channel", - &saif->dma_param.chan_num); - if (ret) { - dev_err(&pdev->dev, "failed to get dma channel\n"); - return ret; - } - } else { - saif->dma_param.chan_num = dmares->start; - } - saif->irq = platform_get_irq(pdev, 0); if (saif->irq < 0) { ret = saif->irq; @@ -759,14 +740,6 @@ static int mxs_saif_probe(struct platform_device *pdev) return ret; } - saif->dma_param.dma_data.chan_irq = platform_get_irq(pdev, 1); - if (saif->dma_param.dma_data.chan_irq < 0) { - ret = saif->dma_param.dma_data.chan_irq; - dev_err(&pdev->dev, "failed to get dma irq resource: %d\n", - ret); - return ret; - } - platform_set_drvdata(pdev, saif); ret = snd_soc_register_component(&pdev->dev, &mxs_saif_component, diff --git a/sound/soc/mxs/mxs-saif.h b/sound/soc/mxs/mxs-saif.h index 3cb342e..53eaa4b 100644 --- a/sound/soc/mxs/mxs-saif.h +++ b/sound/soc/mxs/mxs-saif.h @@ -117,7 +117,6 @@ struct mxs_saif { unsigned int mclk_in_use; void __iomem *base; int irq; - struct mxs_pcm_dma_params dma_param; unsigned int id; unsigned int master_id; unsigned int cur_rate; -- 1.7.9.5

2 1

[alsa-devel] [PATCH] ASoC: jz4740-i2s: Use clk_prepare_enable/clk_disable_unprepare
by Lars-Peter Clausen 12 May '13

12 May '13

In preparation to switching the jz4740 clk driver to the common clk framework update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/jz4740/jz4740-i2s.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c index 9a12644..12c21bd 100644 --- a/sound/soc/jz4740/jz4740-i2s.c +++ b/sound/soc/jz4740/jz4740-i2s.c @@ -118,7 +118,7 @@ static int jz4740_i2s_startup(struct snd_pcm_substream *substream, ctrl |= JZ_AIC_CTRL_FLUSH; jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl); - clk_enable(i2s->clk_i2s); + clk_prepare_enable(i2s->clk_i2s); conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF); conf |= JZ_AIC_CONF_ENABLE; @@ -140,7 +140,7 @@ static void jz4740_i2s_shutdown(struct snd_pcm_substream *substream, conf &= ~JZ_AIC_CONF_ENABLE; jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf); - clk_disable(i2s->clk_i2s); + clk_disable_unprepare(i2s->clk_i2s); } static int jz4740_i2s_trigger(struct snd_pcm_substream *substream, int cmd, @@ -314,10 +314,10 @@ static int jz4740_i2s_suspend(struct snd_soc_dai *dai) conf &= ~JZ_AIC_CONF_ENABLE; jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf); - clk_disable(i2s->clk_i2s); + clk_disable_unprepare(i2s->clk_i2s); } - clk_disable(i2s->clk_aic); + clk_disable_unprepare(i2s->clk_aic); return 0; } @@ -327,10 +327,10 @@ static int jz4740_i2s_resume(struct snd_soc_dai *dai) struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai); uint32_t conf; - clk_enable(i2s->clk_aic); + clk_prepare_enable(i2s->clk_aic); if (dai->active) { - clk_enable(i2s->clk_i2s); + clk_prepare_enable(i2s->clk_i2s); conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF); conf |= JZ_AIC_CONF_ENABLE; @@ -368,7 +368,7 @@ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai) struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai); uint32_t conf; - clk_enable(i2s->clk_aic); + clk_prepare_enable(i2s->clk_aic); jz4740_i2c_init_pcm_config(i2s); @@ -388,7 +388,7 @@ static int jz4740_i2s_dai_remove(struct snd_soc_dai *dai) { struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai); - clk_disable(i2s->clk_aic); + clk_disable_unprepare(i2s->clk_aic); return 0; } -- 1.8.2.1

2 1

[alsa-devel] UCM profiles taken from Ubuntu
by Marcin Juszkiewicz 11 May '13

11 May '13

When I bought Samsung ARM Chromebook few months ago I had no idea about UCM profiles and burnt speakers (left is dead, right is resting). Then I learnt, took ones from ChromeOS and added them into Ubuntu so other users will be a bit more safe. Later I had a discussion with some Debian, Ubuntu, Fedora developers about how to solve such problems and how to keep UCM profiles shared between distributions. Liam Girdwood pointed me to not used git tree at ALSA Project server and finally I reminded myself about it. The idea is to collect UCM profiles, keep them in one place and create alsa-ucm package in each distribution.

6 11

[alsa-devel] [PATCH v5 1/2] ASoC: sgtl5000: Read SGTL5000_CHIP_ID in i2c_probe()
by Fabio Estevam 10 May '13

10 May '13

From: Fabio Estevam <fabio.estevam(a)freescale.com> The usual place for reading chip ID is inside i2c_probe, so move it there and also convert it to regmap. sgtl5000_enable_regulators() needs to read the chip revision, so keep the revision check there. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- Changes since v4: - Just introduced in this version. sound/soc/codecs/sgtl5000.c | 39 ++++++++++++++++++++++++--------------- 1 file changed, 24 insertions(+), 15 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 327b443..af0c8aa 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1275,7 +1275,7 @@ static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec) static int sgtl5000_enable_regulators(struct snd_soc_codec *codec) { - u16 reg; + int reg; int ret; int rev; int i; @@ -1303,23 +1303,17 @@ static int sgtl5000_enable_regulators(struct snd_soc_codec *codec) /* wait for all power rails bring up */ udelay(10); - /* read chip information */ - reg = snd_soc_read(codec, SGTL5000_CHIP_ID); - if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != - SGTL5000_PARTID_PART_ID) { - dev_err(codec->dev, - "Device with ID register %x is not a sgtl5000\n", reg); - ret = -ENODEV; - goto err_regulator_disable; - } - - rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; - dev_info(codec->dev, "sgtl5000 revision 0x%x\n", rev); - /* * workaround for revision 0x11 and later, * roll back to use internal LDO */ + + ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, &reg); + if (ret) + goto err_regulator_disable; + + rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; + if (external_vddd && rev >= 0x11) { /* disable all regulator first */ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies), @@ -1478,7 +1472,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct sgtl5000_priv *sgtl5000; - int ret; + int ret, reg, rev; sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv), GFP_KERNEL); @@ -1492,6 +1486,21 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, return ret; } + /* read chip information */ + ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, &reg); + if (ret) + return ret; + + if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != + SGTL5000_PARTID_PART_ID) { + dev_err(&client->dev, + "Device with ID register %x is not a sgtl5000\n", reg); + return -ENODEV; + } + + rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; + dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev); + i2c_set_clientdata(client, sgtl5000); ret = snd_soc_register_codec(&client->dev, -- 1.7.9.5

4 16

[alsa-devel] [PATCH] snd-es1968: Add radio support for MediaForte M56VAP
by Ondrej Zary 10 May '13

10 May '13

Add support for TEA5757 tuner on MediaForte M56VAP sound+modem+radio card. The GPIO connection type is automatically detected (like snd-fm801 driver). Also add a safety subsystem vendor check to skip radio detection if vendor differs from ESS (so we don't touch GPIOs on laptops). Tested with SF64-PCE2 and M56VAP cards. Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- sound/pci/es1968.c | 73 +++++++++++++++++++++++++++++++++++---------------- 1 files changed, 50 insertions(+), 23 deletions(-) diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index a1f32b5..db08641 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -564,6 +564,7 @@ struct es1968 { #ifdef CONFIG_SND_ES1968_RADIO struct v4l2_device v4l2_dev; struct snd_tea575x tea; + unsigned int tea575x_tuner; #endif }; @@ -2557,37 +2558,47 @@ static int snd_es1968_input_register(struct es1968 *chip) bits 1=unmask write to given bit */ #define IO_DIR 8 /* direction register offset from GPIO_DATA bits 0/1=read/write direction */ -/* mask bits for GPIO lines */ -#define STR_DATA 0x0040 /* GPIO6 */ -#define STR_CLK 0x0080 /* GPIO7 */ -#define STR_WREN 0x0100 /* GPIO8 */ -#define STR_MOST 0x0200 /* GPIO9 */ + +/* GPIO to TEA575x maps */ +struct snd_es1968_tea575x_gpio { + u8 data, clk, wren, most; + char *name; +}; + +static struct snd_es1968_tea575x_gpio snd_es1968_tea575x_gpios[] = { + { .data = 6, .clk = 7, .wren = 8, .most = 9, .name = "SF64-PCE2" }, + { .data = 7, .clk = 8, .wren = 6, .most = 10, .name = "M56VAP" }, +}; + +#define get_tea575x_gpio(chip) \ + (&snd_es1968_tea575x_gpios[(chip)->tea575x_tuner]) + static void snd_es1968_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) { struct es1968 *chip = tea->private_data; - unsigned long io = chip->io_port + GPIO_DATA; + struct snd_es1968_tea575x_gpio gpio = *get_tea575x_gpio(chip); u16 val = 0; - val |= (pins & TEA575X_DATA) ? STR_DATA : 0; - val |= (pins & TEA575X_CLK) ? STR_CLK : 0; - val |= (pins & TEA575X_WREN) ? STR_WREN : 0; + val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0; + val |= (pins & TEA575X_CLK) ? (1 << gpio.clk) : 0; + val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0; - outw(val, io); + outw(val, chip->io_port + GPIO_DATA); } static u8 snd_es1968_tea575x_get_pins(struct snd_tea575x *tea) { struct es1968 *chip = tea->private_data; - unsigned long io = chip->io_port + GPIO_DATA; - u16 val = inw(io); - u8 ret; + struct snd_es1968_tea575x_gpio gpio = *get_tea575x_gpio(chip); + u16 val = inw(chip->io_port + GPIO_DATA); + u8 ret = 0; - ret = 0; - if (val & STR_DATA) + if (val & (1 << gpio.data)) ret |= TEA575X_DATA; - if (val & STR_MOST) + if (val & (1 << gpio.most)) ret |= TEA575X_MOST; + return ret; } @@ -2596,13 +2607,18 @@ static void snd_es1968_tea575x_set_direction(struct snd_tea575x *tea, bool outpu struct es1968 *chip = tea->private_data; unsigned long io = chip->io_port + GPIO_DATA; u16 odir = inw(io + IO_DIR); + struct snd_es1968_tea575x_gpio gpio = *get_tea575x_gpio(chip); if (output) { - outw(~(STR_DATA | STR_CLK | STR_WREN), io + IO_MASK); - outw(odir | STR_DATA | STR_CLK | STR_WREN, io + IO_DIR); + outw(~((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren)), + io + IO_MASK); + outw(odir | (1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), + io + IO_DIR); } else { - outw(~(STR_CLK | STR_WREN | STR_DATA | STR_MOST), io + IO_MASK); - outw((odir & ~(STR_DATA | STR_MOST)) | STR_CLK | STR_WREN, io + IO_DIR); + outw(~((1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) | (1 << gpio.most)), + io + IO_MASK); + outw((odir & ~((1 << gpio.data) | (1 << gpio.most))) + | (1 << gpio.clk) | (1 << gpio.wren), io + IO_DIR); } } @@ -2772,6 +2788,9 @@ static int snd_es1968_create(struct snd_card *card, snd_card_set_dev(card, &pci->dev); #ifdef CONFIG_SND_ES1968_RADIO + /* don't play with GPIOs on laptops */ + if (chip->pci->subsystem_vendor != 0x125d) + goto no_radio; err = v4l2_device_register(&pci->dev, &chip->v4l2_dev); if (err < 0) { snd_es1968_free(chip); @@ -2781,10 +2800,18 @@ static int snd_es1968_create(struct snd_card *card, chip->tea.private_data = chip; chip->tea.radio_nr = radio_nr; chip->tea.ops = &snd_es1968_tea_ops; - strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card)); sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci)); - if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) - printk(KERN_INFO "es1968: detected TEA575x radio\n"); + for (i = 0; i < ARRAY_SIZE(snd_es1968_tea575x_gpios); i++) { + chip->tea575x_tuner = i; + if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) { + snd_printk(KERN_INFO "es1968: detected TEA575x radio type %s\n", + get_tea575x_gpio(chip)->name); + strlcpy(chip->tea.card, get_tea575x_gpio(chip)->name, + sizeof(chip->tea.card)); + break; + } + } +no_radio: #endif *chip_ret = chip; -- Ondrej Zary

1 0