October 2013 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: kirkwood: add S/PDIF support
by Jean-Francois Moine 18 Oct '13

18 Oct '13

This patch adds S/PDIF input/output for mvebu DT boards. Signed-off-by: Jean-Francois Moine <moinejf(a)free.fr> --- Documentation/devicetree/bindings/sound/mvebu-audio.txt | 23 +++++ sound/soc/kirkwood/kirkwood-i2s.c | 128 ++++++++++++++++---------- sound/soc/kirkwood/kirkwood.h | 2 + 3 files changed, 102 insertions(+), 51 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/mvebu-audio.txt b/Documentation/devicetree/bindings/sound/mvebu-audio.txt index f0062c5..c19a5d3 100644 --- a/Documentation/devicetree/bindings/sound/mvebu-audio.txt +++ b/Documentation/devicetree/bindings/sound/mvebu-audio.txt @@ -22,6 +22,27 @@ Required properties: "internal" for the internal clock "extclk" for the external clock +Optional properties: + +- i2s-out: This is a boolean property. If present, the transmitting + function of I2S will be enabled, indicating the I2S is connected + to some IP block, such as an HDMI encoder/display-controller. + +- i2s-in: This is a boolean property. If present, the receiving + function of I2S will be enabled, indicating the I2S is connected + to some IP block, such as an HDMI encoder/display-controller. + +- spdif-out: This is a boolean property. If present, the transmitting + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF out connector/jack on the board or it's connecting to some + other IP block, such as an HDMI encoder/display-controller. + +- spdif-in: This is a boolean property. If present, the receiving + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF in connector/jack on the board. + +* Note: At least one of these four properties should be set in the DT binding. + Example: i2s1: audio-controller@b4000 { @@ -30,4 +51,6 @@ i2s1: audio-controller@b4000 { interrupts = <21>, <22>; clocks = <&gate_clk 13>; clock-names = "internal"; + i2s-out; + spdif-out; }; diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index 0f3d73d..c62c7fa 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -160,9 +160,11 @@ static int kirkwood_i2s_hw_params(struct snd_pcm_substream *substream, case SNDRV_PCM_FORMAT_S16_LE: i2s_value |= KIRKWOOD_I2S_CTL_SIZE_16; ctl_play = KIRKWOOD_PLAYCTL_SIZE_16_C | - KIRKWOOD_PLAYCTL_I2S_EN; + KIRKWOOD_PLAYCTL_I2S_EN | + KIRKWOOD_PLAYCTL_SPDIF_EN; ctl_rec = KIRKWOOD_RECCTL_SIZE_16_C | - KIRKWOOD_RECCTL_I2S_EN; + KIRKWOOD_RECCTL_I2S_EN | + KIRKWOOD_RECCTL_SPDIF_EN; break; /* * doesn't work... S20_3LE != kirkwood 20bit format ? @@ -178,9 +180,11 @@ static int kirkwood_i2s_hw_params(struct snd_pcm_substream *substream, case SNDRV_PCM_FORMAT_S24_LE: i2s_value |= KIRKWOOD_I2S_CTL_SIZE_24; ctl_play = KIRKWOOD_PLAYCTL_SIZE_24 | - KIRKWOOD_PLAYCTL_I2S_EN; + KIRKWOOD_PLAYCTL_I2S_EN | + KIRKWOOD_PLAYCTL_SPDIF_EN; ctl_rec = KIRKWOOD_RECCTL_SIZE_24 | - KIRKWOOD_RECCTL_I2S_EN; + KIRKWOOD_RECCTL_I2S_EN | + KIRKWOOD_PLAYCTL_I2S_EN; break; case SNDRV_PCM_FORMAT_S32_LE: i2s_value |= KIRKWOOD_I2S_CTL_SIZE_32; @@ -253,12 +257,14 @@ static int kirkwood_i2s_play_trigger(struct snd_pcm_substream *substream, writel(value, priv->io + KIRKWOOD_INT_MASK); /* enable playback */ + ctl &= priv->ctl_play_mask; writel(ctl, priv->io + KIRKWOOD_PLAYCTL); break; case SNDRV_PCM_TRIGGER_STOP: /* stop audio, disable interrupts */ - ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE; + ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE | + KIRKWOOD_PLAYCTL_SPDIF_MUTE; writel(ctl, priv->io + KIRKWOOD_PLAYCTL); value = readl(priv->io + KIRKWOOD_INT_MASK); @@ -272,13 +278,15 @@ static int kirkwood_i2s_play_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_PAUSE_PUSH: case SNDRV_PCM_TRIGGER_SUSPEND: - ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE; + ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE | + KIRKWOOD_PLAYCTL_SPDIF_MUTE; writel(ctl, priv->io + KIRKWOOD_PLAYCTL); break; case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE); + ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE | + KIRKWOOD_PLAYCTL_SPDIF_MUTE); writel(ctl, priv->io + KIRKWOOD_PLAYCTL); break; @@ -301,7 +309,8 @@ static int kirkwood_i2s_rec_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_START: /* configure */ ctl = priv->ctl_rec; - value = ctl & ~KIRKWOOD_RECCTL_I2S_EN; + value = ctl & ~(KIRKWOOD_RECCTL_I2S_EN | + KIRKWOOD_RECCTL_SPDIF_EN); writel(value, priv->io + KIRKWOOD_RECCTL); /* enable interrupts */ @@ -310,6 +319,7 @@ static int kirkwood_i2s_rec_trigger(struct snd_pcm_substream *substream, writel(value, priv->io + KIRKWOOD_INT_MASK); /* enable record */ + ctl &= priv->ctl_rec_mask; writel(ctl, priv->io + KIRKWOOD_RECCTL); break; @@ -404,55 +414,75 @@ static const struct snd_soc_dai_ops kirkwood_i2s_dai_ops = { .set_fmt = kirkwood_i2s_set_fmt, }; +static const struct snd_soc_component_driver kirkwood_i2s_component = { + .name = DRV_NAME, +}; -static struct snd_soc_dai_driver kirkwood_i2s_dai = { - .probe = kirkwood_i2s_probe, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | - SNDRV_PCM_RATE_96000, - .formats = KIRKWOOD_I2S_FORMATS, - }, - .capture = { +static int kirkwood_register_component(struct device *dev, + struct kirkwood_dma_data *priv) +{ + struct device_node *np = dev->of_node; + uint32_t ctl_play_mask = ~(KIRKWOOD_PLAYCTL_I2S_EN | + KIRKWOOD_PLAYCTL_SPDIF_EN); + uint32_t ctl_rec_mask = ~(KIRKWOOD_RECCTL_I2S_EN | + KIRKWOOD_RECCTL_SPDIF_EN); + int ret; + + static const struct snd_soc_pcm_stream stream = { .channels_min = 1, .channels_max = 2, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000, .formats = KIRKWOOD_I2S_FORMATS, - }, - .ops = &kirkwood_i2s_dai_ops, -}; + }; -static struct snd_soc_dai_driver kirkwood_i2s_dai_extclk = { - .probe = kirkwood_i2s_probe, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000 | - SNDRV_PCM_RATE_CONTINUOUS | - SNDRV_PCM_RATE_KNOT, - .formats = KIRKWOOD_I2S_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000 | - SNDRV_PCM_RATE_CONTINUOUS | - SNDRV_PCM_RATE_KNOT, - .formats = KIRKWOOD_I2S_FORMATS, - }, - .ops = &kirkwood_i2s_dai_ops, -}; + if (np) { + if (of_property_read_bool(np, "i2s-in")) + ctl_rec_mask |= KIRKWOOD_RECCTL_I2S_EN; + if (of_property_read_bool(np, "i2s-out")) + ctl_play_mask |= KIRKWOOD_PLAYCTL_I2S_EN; + if (of_property_read_bool(np, "spdif-in")) + ctl_rec_mask |= KIRKWOOD_RECCTL_SPDIF_EN; + if (of_property_read_bool(np, "spdif-out")) + ctl_play_mask |= KIRKWOOD_PLAYCTL_SPDIF_EN; + } else { + ctl_rec_mask |= KIRKWOOD_RECCTL_I2S_EN; + ctl_play_mask |= KIRKWOOD_PLAYCTL_I2S_EN; + } + priv->ctl_play_mask = ctl_play_mask; + priv->ctl_rec_mask = ctl_rec_mask; + + priv->soc_dai.probe = kirkwood_i2s_probe; + priv->soc_dai.ops = &kirkwood_i2s_dai_ops; + if (ctl_play_mask & (KIRKWOOD_PLAYCTL_I2S_EN | + KIRKWOOD_PLAYCTL_SPDIF_EN)) { + memcpy(&priv->soc_dai.playback, &stream, + sizeof priv->soc_dai.playback); + if (!IS_ERR(priv->extclk)) + priv->soc_dai.playback.rates = SNDRV_PCM_RATE_8000_192000 | + SNDRV_PCM_RATE_CONTINUOUS | + SNDRV_PCM_RATE_KNOT; + } + if (ctl_rec_mask & (KIRKWOOD_RECCTL_I2S_EN | + KIRKWOOD_RECCTL_SPDIF_EN)) { + memcpy(&priv->soc_dai.capture, &stream, + sizeof priv->soc_dai.capture); + if (!IS_ERR(priv->extclk)) + priv->soc_dai.capture.rates = SNDRV_PCM_RATE_8000_192000 | + SNDRV_PCM_RATE_CONTINUOUS | + SNDRV_PCM_RATE_KNOT; + } -static const struct snd_soc_component_driver kirkwood_i2s_component = { - .name = DRV_NAME, -}; + ret = snd_soc_register_component(dev, &kirkwood_i2s_component, + &priv->soc_dai, 1); + if (ret) + dev_err(dev, "snd_soc_register_component failed\n"); + return ret; +} static int kirkwood_i2s_dev_probe(struct platform_device *pdev) { struct kirkwood_asoc_platform_data *data = pdev->dev.platform_data; - struct snd_soc_dai_driver *soc_dai = &kirkwood_i2s_dai; struct kirkwood_dma_data *priv; struct resource *mem; struct device_node *np = pdev->dev.of_node; @@ -503,7 +533,6 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev) } else { dev_info(&pdev->dev, "found external clock\n"); clk_prepare_enable(priv->extclk); - soc_dai = &kirkwood_i2s_dai_extclk; } } @@ -520,12 +549,9 @@ static int kirkwood_i2s_dev_probe(struct platform_device *pdev) priv->ctl_rec |= KIRKWOOD_RECCTL_BURST_128; } - err = snd_soc_register_component(&pdev->dev, &kirkwood_i2s_component, - soc_dai, 1); - if (err) { - dev_err(&pdev->dev, "snd_soc_register_component failed\n"); + err = kirkwood_register_component(&pdev->dev, priv); + if (err) goto err_component; - } err = snd_soc_register_platform(&pdev->dev, &kirkwood_soc_platform); if (err) { diff --git a/sound/soc/kirkwood/kirkwood.h b/sound/soc/kirkwood/kirkwood.h index f8e1ccc..8f11e03 100644 --- a/sound/soc/kirkwood/kirkwood.h +++ b/sound/soc/kirkwood/kirkwood.h @@ -134,6 +134,8 @@ struct kirkwood_dma_data { struct clk *extclk; uint32_t ctl_play; uint32_t ctl_rec; + uint32_t ctl_play_mask, ctl_rec_mask; + struct snd_soc_dai_driver soc_dai; struct snd_pcm_substream *substream_play; struct snd_pcm_substream *substream_rec; int irq; -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/

3 11

[alsa-devel] [PATCH] ASoC: simple-card: un-implemented .set_fmt is not error
by Kuninori Morimoto 18 Oct '13

18 Oct '13

Current simple-card returns error if DAI doesn't support .set_fmt callback. But the return value -ENOTSUPP means "not supported", it is not error. This patch avoids such case Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/generic/simple-card.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 62befbd..b75c7b1 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -29,6 +29,11 @@ static int __asoc_simple_card_dai_init(struct snd_soc_dai *dai, if (!ret && daifmt) ret = snd_soc_dai_set_fmt(dai, daifmt); + if (ret == -ENOTSUPP) { + dev_warn(dai->dev, "ASoC: set_fmt is not supported\n"); + ret = 0; + } + if (!ret && set->sysclk) ret = snd_soc_dai_set_sysclk(dai, 0, set->sysclk, 0); -- 1.7.9.5

2 1

[alsa-devel] [Patch v2][ 16/37] ASoC: eukrea-tlv320: Add DT support.
by Denis Carikli 18 Oct '13

18 Oct '13

Cc: Rob Herring <rob.herring(a)calxeda.com> Cc: Pawel Moll <pawel.moll(a)arm.com> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Stephen Warren <swarren(a)wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree(a)hellion.org.uk> Cc: devicetree(a)vger.kernel.org Cc: Liam Girdwood <lgirdwood(a)gmail.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: alsa-devel(a)alsa-project.org Cc: Sascha Hauer <kernel(a)pengutronix.de> Cc: linux-arm-kernel(a)lists.infradead.org Cc: Eric Bénard <eric(a)eukrea.com> Signed-off-by: Denis Carikli <denis(a)eukrea.com> --- .../devicetree/bindings/sound/eukrea-tlv320.txt | 23 ++++ sound/soc/fsl/Kconfig | 5 +- sound/soc/fsl/eukrea-tlv320.c | 125 +++++++++++++++++--- 3 files changed, 133 insertions(+), 20 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/eukrea-tlv320.txt diff --git a/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt new file mode 100644 index 0000000..8791037 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt @@ -0,0 +1,23 @@ +Audio complex for Eukrea boards with tlv320aic23 codec. + +Required properties: +- compatible : "eukrea,eukrea-tlv320" +- model : The user-visible name of this sound complex. +- ssi-controller : The phandle of the SSI controller. +- audio-codec : The phandle of the tlv320aic23 audio codec. +- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX). +- mux-ext-port : The external port of the i.MX audio muxer. + +Note: The AUDMUX port numbering should start at 1, which is consistent with +hardware manual. + +Example: + + sound { + compatible = "eukrea,eukrea-tlv320"; + model = "imx51-eukrea-tlv320aic23"; + ssi-controller = <&ssi2>; + fsl,audio-codec = <&tlv320aic23>; + mux-int-port = <2>; + mux-ext-port = <3>; + }; diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index b7ab71f..9c3cd64 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -161,12 +161,15 @@ config SND_SOC_EUKREA_TLV320 depends on MACH_EUKREA_MBIMX27_BASEBOARD \ || MACH_EUKREA_MBIMXSD25_BASEBOARD \ || MACH_EUKREA_MBIMXSD35_BASEBOARD \ - || MACH_EUKREA_MBIMXSD51_BASEBOARD + || MACH_EUKREA_MBIMXSD51_BASEBOARD \ + || OF depends on I2C select SND_SOC_TLV320AIC23 select SND_SOC_IMX_PCM_FIQ select SND_SOC_IMX_AUDMUX select SND_SOC_IMX_SSI + select SND_SOC_FSL_SSI + select SND_SOC_IMX_PCM_DMA help Enable I2S based access to the TLV320AIC23B codec attached to the SSI interface diff --git a/sound/soc/fsl/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c index 9a4a0ca..975af57 100644 --- a/sound/soc/fsl/eukrea-tlv320.c +++ b/sound/soc/fsl/eukrea-tlv320.c @@ -17,6 +17,8 @@ #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/of_platform.h> #include <linux/device.h> #include <linux/i2c.h> #include <sound/core.h> @@ -26,24 +28,33 @@ #include "../codecs/tlv320aic23.h" #include "imx-ssi.h" +#include "fsl_ssi.h" #include "imx-audmux.h" #define CODEC_CLOCK 12000000 +struct eukrea_tlv320 { + char of; +}; + static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct eukrea_tlv320 *priv = snd_soc_card_get_drvdata(rtd->card); struct snd_soc_dai *codec_dai = rtd->codec_dai; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; int ret; - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret) { - pr_err("%s: failed set cpu dai format\n", __func__); - return ret; + /* fsl_ssi lacks the set_fmt ops. */ + if (!priv->of) { + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret) { + pr_err("%s: failed set cpu dai format\n", __func__); + return ret; + } } ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | @@ -60,15 +71,18 @@ static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream, pr_err("%s: failed setting codec sysclk\n", __func__); return ret; } - snd_soc_dai_set_tdm_slot(cpu_dai, 0xffffffc, 0xffffffc, 2, 0); - ret = snd_soc_dai_set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0, - SND_SOC_CLOCK_IN); - if (ret) { - pr_err("can't set CPU system clock IMX_SSP_SYS_CLK\n"); - return ret; - } + /* fsl_ssi lacks the set_sysclk ops */ + if (!priv->of) { + snd_soc_dai_set_tdm_slot(cpu_dai, 0xffffffc, 0xffffffc, 2, 0); + ret = snd_soc_dai_set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0, + SND_SOC_CLOCK_IN); + if (ret) { + pr_err("can't set CPU system clock IMX_SSP_SYS_CLK\n"); + return ret; + } + } return 0; } @@ -80,7 +94,6 @@ static struct snd_soc_dai_link eukrea_tlv320_dai = { .name = "tlv320aic23", .stream_name = "TLV320AIC23", .codec_dai_name = "tlv320aic23-hifi", - .platform_name = "imx-ssi.0", .codec_name = "tlv320aic23-codec.0-001a", .cpu_dai_name = "imx-ssi.0", .ops = &eukrea_tlv320_snd_ops, @@ -97,8 +110,56 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) { int ret; int int_port = 0, ext_port; + struct platform_device *ssi_pdev; + struct device_node *np = pdev->dev.of_node; + struct device_node *ssi_np; + struct eukrea_tlv320 *priv; + + priv = devm_kzalloc(&pdev->dev, + sizeof(struct eukrea_tlv320), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + if (np) { + ssi_np = of_parse_phandle(pdev->dev.of_node, + "ssi-controller", 0); + ssi_pdev = of_find_device_by_node(ssi_np); + if (!ssi_pdev) { + dev_err(&pdev->dev, "ssi-controller missing or " + "invalid.\n"); + ret = -ENODEV; + goto err; + } + + ret = of_property_read_u32(np, "mux-int-port", &int_port); + if (ret) { + dev_err(&pdev->dev, + "mux-int-port missing or invalid\n"); + return ret; + } + ret = of_property_read_u32(np, "mux-ext-port", &ext_port); + if (ret) { + dev_err(&pdev->dev, + "mux-ext-port missing or invalid\n"); + return ret; + } + + /* + * The port numbering in the hardware manual starts at 1, while + * the audmux API expects it starts at 0. + */ + int_port--; + ext_port--; + + eukrea_tlv320_dai.cpu_dai_name = dev_name(&ssi_pdev->dev); + eukrea_tlv320_dai.platform_of_node = ssi_np; + priv->of = 1; + } else { + eukrea_tlv320_dai.platform_name = "imx-ssi.0"; + } - if (machine_is_eukrea_cpuimx27()) { + if (machine_is_eukrea_cpuimx27() || + of_find_compatible_node(NULL, NULL, "fsl,imx21-audmux")) { imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, IMX_AUDMUX_V1_PCR_SYN | IMX_AUDMUX_V1_PCR_TFSDIR | @@ -115,8 +176,12 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) ); } else if (machine_is_eukrea_cpuimx25sd() || machine_is_eukrea_cpuimx35sd() || - machine_is_eukrea_cpuimx51sd()) { - ext_port = machine_is_eukrea_cpuimx25sd() ? 4 : 3; + machine_is_eukrea_cpuimx51sd() || + of_find_compatible_node(NULL, NULL, "fsl,imx31-audmux")) { + if (!np) + ext_port = machine_is_eukrea_cpuimx25sd() ? + 4 : 3; + imx_audmux_v2_configure_port(int_port, IMX_AUDMUX_V2_PTCR_SYN | IMX_AUDMUX_V2_PTCR_TFSDIR | @@ -130,14 +195,29 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) IMX_AUDMUX_V2_PDCR_RXDSEL(int_port) ); } else { - /* return happy. We might run on a totally different machine */ - return 0; + if (np) { + /* The eukrea,eukrea-tlv320 driver was explicitely + * requested (through the device tree). + */ + dev_err(&pdev->dev, + "Missing audmux DT node.\n"); + return -ENODEV; + } else { + /* Return happy. + * We might run on a totally different machine. + */ + return 0; + } } eukrea_tlv320.dev = &pdev->dev; + snd_soc_card_set_drvdata(&eukrea_tlv320, priv); ret = snd_soc_register_card(&eukrea_tlv320); +err: if (ret) dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + if (np) + of_node_put(ssi_np); return ret; } @@ -149,10 +229,17 @@ static int eukrea_tlv320_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id imx_tlv320_dt_ids[] = { + { .compatible = "eukrea,eukrea-tlv320"}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx_tlv320_dt_ids); + static struct platform_driver eukrea_tlv320_driver = { .driver = { .name = "eukrea_tlv320", .owner = THIS_MODULE, + .of_match_table = imx_tlv320_dt_ids, }, .probe = eukrea_tlv320_probe, .remove = eukrea_tlv320_remove,}; -- 1.7.9.5

2 1

[alsa-devel] [PATCH v3] sound: pci: emu10k1: code refactoring
by Geyslan G. Bem 18 Oct '13

18 Oct '13

Partially restructures _snd_emu10k1_audigy_init_efx() and _snd_emu10k1_init_efx() functions. Be noted that the cast is demanded to use '__user'. So, in these cases, avoid patches based on the coccinelle 'drop_kmalloc_cast' semantic patch. Signed-off-by: Geyslan G. Bem <geyslan(a)gmail.com> --- sound/pci/emu10k1/emufx.c | 76 ++++++++++++++++++++++++++++------------------- 1 file changed, 45 insertions(+), 31 deletions(-) diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 0275209..1f9c7c4 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -1182,15 +1182,20 @@ static int _snd_emu10k1_audigy_init_efx(struct snd_emu10k1 *emu) u32 *gpr_map; mm_segment_t seg; - if ((icode = kzalloc(sizeof(*icode), GFP_KERNEL)) == NULL || - (icode->gpr_map = (u_int32_t __user *) - kcalloc(512 + 256 + 256 + 2 * 1024, sizeof(u_int32_t), - GFP_KERNEL)) == NULL || - (controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, - sizeof(*controls), GFP_KERNEL)) == NULL) { - err = -ENOMEM; - goto __err; - } + err = -ENOMEM; + icode = kzalloc(sizeof(*icode), GFP_KERNEL); + if (!icode) + return err; + + icode->gpr_map = (u_int32_t __user *) kcalloc(512 + 256 + 256 + 2 * 1024, + sizeof(u_int32_t), GFP_KERNEL); + if (!icode->gpr_map) + goto __err_gpr; + controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, + sizeof(*controls), GFP_KERNEL); + if (!controls) + goto __err_ctrls; + gpr_map = (u32 __force *)icode->gpr_map; icode->tram_data_map = icode->gpr_map + 512; @@ -1741,12 +1746,12 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) emu->support_tlv = 0; /* clear again */ snd_leave_user(seg); - __err: +__err: kfree(controls); - if (icode != NULL) { - kfree((void __force *)icode->gpr_map); - kfree(icode); - } +__err_ctrls: + kfree((void __force *)icode->gpr_map); +__err_gpr: + kfree(icode); return err; } @@ -1813,18 +1818,26 @@ static int _snd_emu10k1_init_efx(struct snd_emu10k1 *emu) u32 *gpr_map; mm_segment_t seg; - if ((icode = kzalloc(sizeof(*icode), GFP_KERNEL)) == NULL) - return -ENOMEM; - if ((icode->gpr_map = (u_int32_t __user *) - kcalloc(256 + 160 + 160 + 2 * 512, sizeof(u_int32_t), - GFP_KERNEL)) == NULL || - (controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, - sizeof(struct snd_emu10k1_fx8010_control_gpr), - GFP_KERNEL)) == NULL || - (ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL)) == NULL) { - err = -ENOMEM; - goto __err; - } + err = -ENOMEM; + icode = kzalloc(sizeof(*icode), GFP_KERNEL); + if (!icode) + return err; + + icode->gpr_map = (u_int32_t __user *) kcalloc(256 + 160 + 160 + 2 * 512, + sizeof(u_int32_t), GFP_KERNEL); + if (!icode->gpr_map) + goto __err_gpr; + + controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, + sizeof(struct snd_emu10k1_fx8010_control_gpr), + GFP_KERNEL); + if (!controls) + goto __err_ctrls; + + ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL); + if (!ipcm) + goto __err_ipcm; + gpr_map = (u32 __force *)icode->gpr_map; icode->tram_data_map = icode->gpr_map + 256; @@ -2363,13 +2376,14 @@ static int _snd_emu10k1_init_efx(struct snd_emu10k1 *emu) snd_leave_user(seg); if (err >= 0) err = snd_emu10k1_ipcm_poke(emu, ipcm); - __err: +__err: kfree(ipcm); +__err_ipcm: kfree(controls); - if (icode != NULL) { - kfree((void __force *)icode->gpr_map); - kfree(icode); - } +__err_ctrls: + kfree((void __force *)icode->gpr_map); +__err_gpr: + kfree(icode); return err; } -- 1.8.4

2 1

[alsa-devel] [PATCH] ASoC: simple-card: un-implemented set_fmt is not error
by Kuninori Morimoto 18 Oct '13

18 Oct '13

Current simple-card returns error if DAI doesn't support .set_fmt callback. But the error is -ENOTSUPP (= not supported), and it is not error. This patch avoids such case Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/generic/simple-card.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 8c49147..b2fbb70 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -27,6 +27,11 @@ static int __asoc_simple_card_dai_init(struct snd_soc_dai *dai, if (!ret && daifmt) ret = snd_soc_dai_set_fmt(dai, daifmt); + if (ret == -ENOTSUPP) { + dev_dbg(dai->dev, "ASoC: set_fmt is not supported\n"); + ret = 0; + } + if (!ret && set->sysclk) ret = snd_soc_dai_set_sysclk(dai, 0, set->sysclk, 0); -- 1.7.9.5

1 0

[alsa-devel] [PATCH 1/3] ALSA: pxa: slightly refactor reset handling
by Dmitry Eremin-Solenikov 18 Oct '13

18 Oct '13

PXA25x also shows some problems when using interrupts during reset handling. Thus do not use interrupts on all pxa kinds (to detect codec ready state). Instead use a common mdelay-loop on all platforms to detect codecs becoming ready. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov(a)gmail.com> --- sound/arm/pxa2xx-ac97-lib.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-) diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index e6f4633..99a4668 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -117,8 +117,7 @@ static inline void pxa_ac97_warm_pxa25x(void) { gsr_bits = 0; - GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); + GCR |= GCR_WARM_RST; } static inline void pxa_ac97_cold_pxa25x(void) @@ -129,8 +128,6 @@ static inline void pxa_ac97_cold_pxa25x(void) gsr_bits = 0; GCR = GCR_COLD_RST; - GCR |= GCR_CDONE_IE|GCR_SDONE_IE; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); } #endif @@ -149,8 +146,6 @@ static inline void pxa_ac97_warm_pxa27x(void) static inline void pxa_ac97_cold_pxa27x(void) { - unsigned int timeout; - GCR &= GCR_COLD_RST; /* clear everything but nCRST */ GCR &= ~GCR_COLD_RST; /* then assert nCRST */ @@ -161,29 +156,20 @@ static inline void pxa_ac97_cold_pxa27x(void) udelay(5); clk_disable(ac97conf_clk); GCR = GCR_COLD_RST | GCR_WARM_RST; - timeout = 100; /* wait for the codec-ready bit to be set */ - while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(1); } #endif #ifdef CONFIG_PXA3xx static inline void pxa_ac97_warm_pxa3xx(void) { - int timeout = 100; - gsr_bits = 0; /* Can't use interrupts */ GCR |= GCR_WARM_RST; - while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(1); } static inline void pxa_ac97_cold_pxa3xx(void) { - int timeout = 1000; - /* Hold CLKBPB for 100us */ GCR = 0; GCR = GCR_CLKBPB; @@ -199,14 +185,13 @@ static inline void pxa_ac97_cold_pxa3xx(void) GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); GCR = GCR_WARM_RST | GCR_COLD_RST; - while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(10); } #endif bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) { unsigned long gsr; + unsigned int timeout = 100; #ifdef CONFIG_PXA25x if (cpu_is_pxa25x()) @@ -224,6 +209,10 @@ bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) else #endif BUG(); + + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); + gsr = GSR | gsr_bits; if (!(gsr & (GSR_PCR | GSR_SCR))) { printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", @@ -239,6 +228,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset); bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) { unsigned long gsr; + unsigned int timeout = 1000; #ifdef CONFIG_PXA25x if (cpu_is_pxa25x()) @@ -257,6 +247,9 @@ bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) #endif BUG(); + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); + gsr = GSR | gsr_bits; if (!(gsr & (GSR_PCR | GSR_SCR))) { printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", -- 1.8.4.rc3

2 5

[alsa-devel] [PATCH][RFC] ASoC: add default xlate on snd_soc_of_get_dai_name()
by Kuninori Morimoto 18 Oct '13

18 Oct '13

Current snd_soc_of_get_dai_name() needs .of_xlate_dai_name() callback on each component drivers. But required behavior on almost all these drivers is just returns its indexed dai driver's name. This patch adds this feature as default behavior. .of_xlate_dai_name() can overwrite it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- This is RFC patch. On ML discussed that snd_soc_of_get_dai_name() needs .of_xlate_dai_name to get/exchange device name from device node ID. But, almost all driver's .of_xlate_dai_name will be same implementation. (return name of indexed dai driver) So, this patch adds it as default behavior. .of_xlate_dai_name() can over write it. This patch is based on mark/topic/component include/sound/soc.h | 4 +++- sound/soc/soc-core.c | 16 ++++++++++++---- 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 1dd7dc5..ae715ca 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -684,10 +684,12 @@ struct snd_soc_component_driver { struct snd_soc_component { const char *name; int id; - int num_dai; struct device *dev; struct list_head list; + struct snd_soc_dai_driver *dai_drv; + int num_dai; + const struct snd_soc_component_driver *driver; }; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 711bd36..51ea2c3 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -4048,6 +4048,7 @@ __snd_soc_register_component(struct device *dev, cmpnt->dev = dev; cmpnt->driver = cmpnt_drv; + cmpnt->dai_drv = dai_drv; cmpnt->num_dai = num_dai; /* @@ -4609,12 +4610,19 @@ int snd_soc_of_get_dai_name(struct device_node *of_node, if (pos->dev->of_node != args.np) continue; - if (!pos->driver->of_xlate_dai_name) { - ret = -ENOSYS; - break; + if (pos->driver->of_xlate_dai_name) { + ret = pos->driver->of_xlate_dai_name(pos, &args, dai_name); + } else { + int id = args.args[0]; + + if (id < 0 || id >= pos->num_dai) { + ret = -EINVAL; + } else { + *dai_name = pos->dai_drv[id].name; + ret = 0; + } } - ret = pos->driver->of_xlate_dai_name(pos, &args, dai_name); break; } mutex_unlock(&client_mutex); -- 1.7.9.5

3 4

[alsa-devel] [PATCH] sound: pci: emu10k1: code refactoring and casting removal
by Geyslan G. Bem 18 Oct '13

18 Oct '13

Partially restructures _snd_emu10k1_audigy_init_efx() and _snd_emu10k1_init_efx() functions. Removes useless casting (void *) from value returned by kcalloc; see Documentation/CodingStyle, Chap 14. Signed-off-by: Geyslan G. Bem <geyslan(a)gmail.com> --- sound/pci/emu10k1/emufx.c | 84 ++++++++++++++++++++++++++--------------------- 1 file changed, 46 insertions(+), 38 deletions(-) diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 0275209..afd4691 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -1182,15 +1182,20 @@ static int _snd_emu10k1_audigy_init_efx(struct snd_emu10k1 *emu) u32 *gpr_map; mm_segment_t seg; - if ((icode = kzalloc(sizeof(*icode), GFP_KERNEL)) == NULL || - (icode->gpr_map = (u_int32_t __user *) - kcalloc(512 + 256 + 256 + 2 * 1024, sizeof(u_int32_t), - GFP_KERNEL)) == NULL || - (controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, - sizeof(*controls), GFP_KERNEL)) == NULL) { - err = -ENOMEM; - goto __err; - } + err = -ENOMEM; + icode = kzalloc(sizeof(*icode), GFP_KERNEL); + if (!icode) + return err; + + icode->gpr_map = (__user) kcalloc(512 + 256 + 256 + 2 * 1024, + sizeof(u_int32_t), GFP_KERNEL); + if (!icode->gpr_map) + goto __err_gpr; + controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, + sizeof(*controls), GFP_KERNEL); + if (!controls) + goto __err_ctrls; + gpr_map = (u32 __force *)icode->gpr_map; icode->tram_data_map = icode->gpr_map + 512; @@ -1741,12 +1746,12 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input)) emu->support_tlv = 0; /* clear again */ snd_leave_user(seg); - __err: +__err: kfree(controls); - if (icode != NULL) { - kfree((void __force *)icode->gpr_map); - kfree(icode); - } +__err_ctrls: + kfree((void __force *)icode->gpr_map); +__err_gpr: + kfree(icode); return err; } @@ -1813,18 +1818,26 @@ static int _snd_emu10k1_init_efx(struct snd_emu10k1 *emu) u32 *gpr_map; mm_segment_t seg; - if ((icode = kzalloc(sizeof(*icode), GFP_KERNEL)) == NULL) - return -ENOMEM; - if ((icode->gpr_map = (u_int32_t __user *) - kcalloc(256 + 160 + 160 + 2 * 512, sizeof(u_int32_t), - GFP_KERNEL)) == NULL || - (controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, - sizeof(struct snd_emu10k1_fx8010_control_gpr), - GFP_KERNEL)) == NULL || - (ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL)) == NULL) { - err = -ENOMEM; - goto __err; - } + err = -ENOMEM; + icode = kzalloc(sizeof(*icode), GFP_KERNEL); + if (!icode) + return err; + + icode->gpr_map = (__user) kcalloc(256 + 160 + 160 + 2 * 512, + sizeof(u_int32_t), GFP_KERNEL); + if (!icode->gpr_map) + goto __err_gpr; + + controls = kcalloc(SND_EMU10K1_GPR_CONTROLS, + sizeof(struct snd_emu10k1_fx8010_control_gpr), + GFP_KERNEL); + if (!controls) + goto __err_ctrls; + + ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL); + if (!ipcm) + goto __err_ipcm; + gpr_map = (u32 __force *)icode->gpr_map; icode->tram_data_map = icode->gpr_map + 256; @@ -2335,14 +2348,8 @@ static int _snd_emu10k1_init_efx(struct snd_emu10k1 *emu) for (z = 0; z < 16; z++) OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z)); } - - if (gpr > tmp) { - snd_BUG(); - err = -EIO; - goto __err; - } - if (i > SND_EMU10K1_GPR_CONTROLS) { + if (gpr > tmp || i > SND_EMU10K1_GPR_CONTROLS) { snd_BUG(); err = -EIO; goto __err; @@ -2363,13 +2370,14 @@ static int _snd_emu10k1_init_efx(struct snd_emu10k1 *emu) snd_leave_user(seg); if (err >= 0) err = snd_emu10k1_ipcm_poke(emu, ipcm); - __err: +__err: kfree(ipcm); +__err_ipcm: kfree(controls); - if (icode != NULL) { - kfree((void __force *)icode->gpr_map); - kfree(icode); - } +__err_ctrls: + kfree((void __force *)icode->gpr_map); +__err_gpr: + kfree(icode); return err; } -- 1.8.4

4 6

[alsa-devel] [PATCH 1/2] ASoC: dai: Provide interface for setting DMA data at probe time
by Mark Brown 17 Oct '13

17 Oct '13

From: Mark Brown <broonie(a)linaro.org> Allow DMA data to be set at probe time for devices that can do that, avoiding the need to do it every time we start a stream and supporting non-DT dmaengine users using the helpers. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- include/sound/soc-dai.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 1ce3685..800c101 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -286,6 +286,13 @@ static inline void snd_soc_dai_set_dma_data(struct snd_soc_dai *dai, dai->capture_dma_data = data; } +static inline void snd_soc_dai_init_dma_data(struct snd_soc_dai *dai, + void *playback, void *capture) +{ + dai->playback_dma_data = playback; + dai->capture_dma_data = capture; +} + static inline void snd_soc_dai_set_drvdata(struct snd_soc_dai *dai, void *data) { -- 1.8.4.rc3

1 1

[alsa-devel] [PATCH 0/8] i2c: Remove redundant driver field from the i2c_client struct
by Lars-Peter Clausen 17 Oct '13

17 Oct '13

Hi, This series removes the redundant driver field from the i2c_client struct. The field is redundant since the same pointer can be accessed through to_i2c_driver(client->dev.driver). The commit log suggests that the field has been around since forever (since before v2.6.12-rc2) and it looks as if it was simply forgotten to remove it during the conversion of the i2c framework to the generic device driver model. Nevertheless there are a still a few users of the field around. This series first updates all users to use an alternative method of accessing the same data and then the last patch removes the driver field from the i2c_client struct. Note that due to this changes on most architectures neither the code size nor the type of generated instructions will change. This is due to the fact that we aren't really interested in the pointer value itself, but rather want to dereference it to access one of the fields of the struct. offset_of() (and hence to_i2c_driver) works by subtracting a offset from the pointer, so the compiler can internally create the sum of these two offsets and use that to access the field. E.g. on ARM the expression client->driver->command(...) generates ... ldr r3, [r0, #28] ldr r3, [r3, #32] blx r3 ... and the expression to_i2c_driver(client->dev.driver)->command(...) generates ... ldr r3, [r0, #160] ldr r3, [r3, #-4] blx r3 ... Other architectures will generate similar code. The most common pattern is to use the i2c_driver to get to the device_driver struct embedded in it. The same struct can easily be accessed through the device struct embedded in the i2c_client struct. E.g. client->driver->driver.field can be replaced by client->dev.driver->field. Here again the generated code is almost identical and only the offsets differ. E.g. on ARM the expression 'client->driver->driver.owner' generates ldr r3, [r0, #28] ldr r0, [r3, #44] and 'client->dev.driver->owner' generates ldr r3, [r0, #160] ldr r0, [r3, #8] The kernel overall code size is slightly reduced since the code that manages the driver field is removed and of course also the runtime memory footprint of the i2c_client struct is reduced. - Lars Lars-Peter Clausen (8): [media] s5c73m3: Don't use i2c_client->driver [media] exynos4-is: Don't use i2c_client->driver [media] core: Don't use i2c_client->driver drm: encoder_slave: Don't use i2c_client->driver drm: nouveau: Don't use i2c_client->driver ALSA: ppc: keywest: Don't use i2c_client->driver ASoC: imx-wm8962: Don't use i2c_client->driver i2c: Remove redundant 'driver' field from the i2c_client struct drivers/gpu/drm/drm_encoder_slave.c | 8 ++++---- drivers/gpu/drm/nouveau/core/subdev/therm/ic.c | 3 ++- drivers/i2c/i2c-core.c | 21 ++++++++++++--------- drivers/i2c/i2c-smbus.c | 10 ++++++---- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 2 +- drivers/media/platform/exynos4-is/media-dev.c | 6 +++--- drivers/media/v4l2-core/tuner-core.c | 6 +++--- drivers/media/v4l2-core/v4l2-common.c | 10 +++++----- include/linux/i2c.h | 2 -- include/media/v4l2-common.h | 2 +- sound/ppc/keywest.c | 4 ++-- sound/soc/fsl/imx-wm8962.c | 2 +- 12 files changed, 40 insertions(+), 36 deletions(-) -- 1.8.0

7 17