June 2012 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 1/4] utils/alsa-info.sh: adding system firmware version to the defaults collected under "DMI Information"
by David Henningsson 11 Jun '12

11 Jun '12

From: Chris Van Hoof <vanhoof(a)canonical.com> Signed-off-by: Chris Van Hoof <vanhoof(a)canonical.com> Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- utils/alsa-info.sh | 3 +++ 1 file changed, 3 insertions(+) diff --git a/utils/alsa-info.sh b/utils/alsa-info.sh index fd7df96..46d2ebb 100755 --- a/utils/alsa-info.sh +++ b/utils/alsa-info.sh @@ -424,10 +424,12 @@ if [ -d /sys/class/dmi/id ]; then DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null) DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null) + DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null) elif [ -x $DMIDECODE ]; then DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null) DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null) DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null) + DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null) fi cat /proc/asound/modules 2>/dev/null|awk {'print $2'}>$TEMPDIR/alsamodules.tmp @@ -469,6 +471,7 @@ echo "" >> $FILE echo "Manufacturer: $DMI_SYSTEM_MANUFACTURER" >> $FILE echo "Product Name: $DMI_SYSTEM_PRODUCT_NAME" >> $FILE echo "Product Version: $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE +echo "Firmware Version: $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE echo "" >> $FILE echo "" >> $FILE echo "!!Kernel Information" >> $FILE -- 1.7.9.5

2 4

Re: [alsa-devel] [PATCH v3] ASoC: codecs: Add DA732x codec driver
by Adam Thomson 11 Jun '12

11 Jun '12

On Wed, Jun 11, 2012 at 10:02AM, Mark Brown wrote: > > ASoC should be the same in both, my for-next is what turns up in -next. > The change would get applied on for-3.6. Ok, thanks for the info. Will base against 'for-3.6'.

1 0

[alsa-devel] [PATCH] ASOC: utils: Fix the dummy_codec
by Selma Bensaid 11 Jun '12

11 Jun '12

This patch consists in settings the channels_min, rates and formats of the dummy codec DAI driver to enable the creation of the PCM streams using it. Signed-off-by: Selma Bensaid <selma.bensaid(a)intel.com> --- sound/soc/soc-utils.c | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c index 6005370..465a094 100644 --- a/sound/soc/soc-utils.c +++ b/sound/soc/soc-utils.c @@ -89,9 +89,27 @@ static struct snd_soc_platform_driver dummy_platform = { .ops = &dummy_dma_ops, }; +#define NULL_FORMATS \ + (SNDRV_PCM_FMTBIT_S16 | SNDRV_PCM_FMTBIT_U16 |\ + SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_U24 |\ + SNDRV_PCM_FMTBIT_S32 | SNDRV_PCM_FMTBIT_U32) + static struct snd_soc_codec_driver dummy_codec; static struct snd_soc_dai_driver dummy_dai = { .name = "snd-soc-dummy-dai", + .playback = { + .channels_min = 1, + .channels_max = 16, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = NULL_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 16, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = NULL_FORMATS, + }, + .ops = NULL, }; static __devinit int snd_soc_dummy_probe(struct platform_device *pdev) -- 1.7.0.4 --------------------------------------------------------------------- Intel Corporation SAS (French simplified joint stock company) Registered headquarters: "Les Montalets"- 2, rue de Paris, 92196 Meudon Cedex, France Registration Number: 302 456 199 R.C.S. NANTERRE Capital: 4,572,000 Euros This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

3 8

Re: [alsa-devel] [PATCH v3] ASoC: codecs: Add DA732x codec driver
by Adam Thomson 11 Jun '12

11 Jun '12

On Wed, Jun 11, 2012 at 05:41AM, Mark Brown wrote: > This doesn't apply, please always submit new code against current > development code for the subsystem. You've also got something else > wrong with your setup, the Date: header for your mail is "Date: $(date > -R)" which is upsetting the tools. Apologies. Was using linux-next as my base code. Will re-send changes against your ASoC repository. Assume it should be against the 'for-next' head? > Please also send followups adding the specific devices to the ID table. Currently there's just one device ID. Will add that now, and when new devices are available then will then update accordingly.

2 1

Re: [alsa-devel] [PATCH 1/3] ASoC: codecs: Add AB8500 codec-driver
by Mark Brown 11 Jun '12

11 Jun '12

On Thu, Jun 07, 2012 at 02:00:21PM +0200, Ola Lilja wrote: > Add codec-driver for ST-Ericsson AB8500 mixed-signal ASIC. So, I applied this even though you left the API for doing platform data in the machine driver in place since I see further patches which should allow these to be unexported. It'd have been better if you'd removed them from this patch as requested, that way history would be a bit cleaner and I'd not have to decide if the current stuff is OK.

1 0

[alsa-devel] [PATCH 1/5] ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversion
by Mark Brown 11 Jun '12

11 Jun '12

We no longer have a flat ASoC cache so can't peer directly into the array any more but should instead use the register I/O functions to update the cache. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8904.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 560a9a47..461c58a 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -2084,7 +2084,6 @@ static int wm8904_probe(struct snd_soc_codec *codec) { struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec); struct wm8904_pdata *pdata = wm8904->pdata; - u16 *reg_cache = codec->reg_cache; int ret, i; codec->cache_sync = 1; @@ -2180,14 +2179,18 @@ static int wm8904_probe(struct snd_soc_codec *codec) if (!pdata->gpio_cfg[i]) continue; - reg_cache[WM8904_GPIO_CONTROL_1 + i] - = pdata->gpio_cfg[i] & 0xffff; + regmap_update_bits(wm8904->regmap, + WM8904_GPIO_CONTROL_1 + i, + 0xffff, + pdata->gpio_cfg[i]); } /* Zero is the default value for these anyway */ for (i = 0; i < WM8904_MIC_REGS; i++) - reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i] - = pdata->mic_cfg[i]; + regmap_update_bits(wm8904->regmap, + WM8904_MIC_BIAS_CONTROL_0 + i, + 0xffff, + pdata->mic_cfg[i]); } /* Set Class W by default - this will be managed by the Class -- 1.7.10

1 4

[alsa-devel] [PATCH] ASoC: OMAP: HDMI: Initialize IEC-60958 channel status word
by Ricardo Neri 11 Jun '12

11 Jun '12

Hi Mark, Liam, This patch is to fix an bug that I found in K3.5-rc1. As the IEC-60958 channel status word is not initialized in hw_params, the params from previous calls corrupt those of the current playback. BR Ricardo Ricardo Neri (1): ASoC: OMAP: HDMI: Initialize IEC-60958 channel status word sound/soc/omap/omap-hdmi.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) -- 1.7.5.4

2 5

Re: [alsa-devel] [PATCH v3] ASoC: codecs: Add DA732x codec driver
by Mark Brown 11 Jun '12

11 Jun '12

On Wed, Jun 06, 2012 at 04:35:39PM +0000, Adam Thomson wrote: > This patch adds support for the Dialog DA732x audio codec. > > Signed-off-by: Michal Hajduk <Michal.Hajduk(a)diasemi.com> > Signed-off-by: Adam Thomson <Adam.Thomson(a)diasemi.com> This doesn't apply, please always submit new code against current development code for the subsystem. You've also got something else wrong with your setup, the Date: header for your mail is "Date: $(date -R)" which is upsetting the tools. Please also send followups adding the specific devices to the ID table.

1 0

Re: [alsa-devel] [PATCH 2/2 V3] ASoC: fix pxa-ssp compiling issue under mach-mmp
by Mark Brown 11 Jun '12

11 Jun '12

On Mon, Jun 11, 2012 at 09:52:36AM +0800, Qiao Zhou wrote: > On 06/04/2012 10:41 AM, Qiao Zhou wrote: Delete irrelevant quotes from your mails! There's about 180 lines of text here and only one line of new text buried right at the bttom. > > pxa-ssp.c uses API like cpu_is_pxa3xx(), cpu_is_pxa2xx(), which is > > defined under arch-pxa architecture, and drivers under mach-mmp > do you have any suggestion/comment about the patch series? I'm hoping that the arch/arm patch can can get reviewed... -- To unsubscribe from this list: send the line "unsubscribe alsa-devel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

2 2

[alsa-devel] [PATCH] ASoC: lm49453: Remove a unneeded version.h include
by Jesper Juhl 11 Jun '12

11 Jun '12

Signed-off-by: Jesper Juhl <jj(a)chaosbits.net> --- sound/soc/codecs/lm49453.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/lm49453.c b/sound/soc/codecs/lm49453.c index 802b9f1..c1bc945 100644 --- a/sound/soc/codecs/lm49453.c +++ b/sound/soc/codecs/lm49453.c @@ -12,7 +12,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/version.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -- 1.7.10.4 -- Jesper Juhl <jj(a)chaosbits.net> http://www.chaosbits.net/ Don't top-post http://www.catb.org/jargon/html/T/top-post.html Plain text mails only, please.

2 1