April 2012 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 0/3] Alsa: USB: Improve M-Audio Fast Track Ultra mixer
by Felix Homann 23 Apr '12

23 Apr '12

This series of patches improves the mixer for Fast Track Ultra (8R) devices by * adding TLV to existing controls * adding new controls for the effect section. It unifies the control creation for FTU and Ebox-44 devices. Mark, could you please look at mixer_quirks.c. Do we really need the range settings in snd_create_std_mono_ctl()? BTW, you might like to add some TLV callback to the Ebox-44 controls as well. Regards, Felix Felix Homann (3): Unify M-Audio Fast Track Ultra and Ebox-44 mixer quirks. Add TLV to M-Audio volume controls M-Audio FTU: Add effect controls sound/usb/mixer.c | 23 +++ sound/usb/mixer_quirks.c | 493 +++++++++++++++++++++++++++++++++++++++------ 2 files changed, 450 insertions(+), 66 deletions(-) -- 1.7.5.4

2 10

[alsa-devel] [PATCH] alsa-lib conf: Add two more USB devices to iec958 blacklist
by David Henningsson 23 Apr '12

23 Apr '12

Add "Logitech Wireless Headset" and "Logitech Speaker Lapdesk N700" to the iec958 blacklist. Also reorder the list in alphabetic order. BugLink: https://bugs.launchpad.net/bugs/987163 Reported-by: Jean-Baptiste Lallement <jean-baptiste(a)ubuntu.com> Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- src/conf/cards/USB-Audio.conf | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf index b9148e7..0a0e374 100644 --- a/src/conf/cards/USB-Audio.conf +++ b/src/conf/cards/USB-Audio.conf @@ -38,10 +38,12 @@ USB-Audio.pcm.iec958_device { # "NoiseBlaster 3000" 42 # The below don't have digital in/out, so prevent them from being opened. - "Sennheiser USB headset" 999 + "Blue Snowball" 999 + "Logitech Speaker Lapdesk N700" 999 "Logitech USB Headset" 999 + "Logitech Wireless Headset" 999 + "Sennheiser USB headset" 999 "USB Device 0x46d:0x992" 999 - "Blue Snowball" 999 } -- 1.7.5.4

2 1

[alsa-devel] HDSPM: Wrong samplerate on PCI cards
by Andre Schramm 22 Apr '12

22 Apr '12

Hi, we're having issues obtaining the correct system sample rate from PCI cards, while it works correctly for PCIe cards. I tested with stock ALSA-driver 1.0.{24,25} as well as latest Repo-Version via alsa-compile.sh on 64b-Kernel 3.0.9-RT25. I added some printks, the culprit seems to be: hdspm.c:1988: period = hdspm_read(hdspm, HDSPM_RD_PLL_FREQ); Output for PCIe card: kernel: ALSA sound/pci/rme9652/hdspm.c:1379 HDSPM: hdspm_calc_dds_value: freq_const=110069313433624, period=2293110696, freq_const/period=48000 Output for PCI card: kernel: ALSA sound/pci/rme9652/hdspm.c:1379 HDSPM: hdspm_calc_dds_value: freq_const=110069313433624, period=41943044, freq_const/period=2624256 I tested with 3 different PCI cards (latest firmware) and the same card(s) works as expected on 32b-Kernel 2.6.24.7 with ALSA 1.0.16. The card's registers look exactly the same when applying the same card settings via amixer. Starting JACKd works on both cards and audio output is fine. Within the driver, I don't see a different code path for PCI and PCIe, so this seems weird. I took a look at the Mac driver as well, it defines RD_PLL_FREQ as 4*128, so this should be ok? Can anybody confirm this? And any ideas, what's going on here? I noticed a mismatch between "struct hdspm" (int system_sample_rate) and "struct hdspm_config" (unsigned int system_sample_rate), but this doesn't seem to be an issue? And the proc-output for the samplerate is wrong/misleading as it isn't read directly from the card as opposed to the RayDat-Code. Is there any reason for this? Detailed output below (card 0 is PCIe, card 1 is PCI). Note: amixer is 64b as well, so the 32b compat stuff shouldn't matter. Cheers, Andre # cat /proc/asound/cards 0 [HDSPMx1c9359 ]: HDSPM - RME MADI_1c9359 RME MADI S/N 0x1c9359 at 0xfe900000, irq 17 1 [Default ]: HDSPM - RME MADI_ffffff RME MADI S/N 0xffffff at 0xfeb00000, irq 17 # amixer -c0 cget numid=6 numid=6,iface=MIXER,name='System Sample Rate' ; type=INTEGER,access=r-------,values=1,min=27000,max=207000,step=1 : values=48000 # amixer -c1 cget numid=6 numid=6,iface=MIXER,name='System Sample Rate' ; type=INTEGER,access=r-------,values=1,min=27000,max=207000,step=1 : values=2624256 # cat /proc/asound/card0/hdspm RME MADI (Card #1) Rev.d2 Status2first3bits: 1 HW Serial: 0x0000011c9359 IRQ: 17 Registers bus: 0xfe900000 VM: 0xffffc900114e0000 --- System --- IRQ Pending: Audio=0, MIDI0=0, MIDI1=0, IRQcount=0 HW pointer: id = 0, rawptr = 0 (0->16320) estimated= 0 (bytes) MIDI FIFO: Out1=0x0, Out2=0x0, In1=0x80, In2=0x80 MIDIoverMADI FIFO: In=0x0, Out=0x0 Register: ctrl1=0x10044da, ctrl2=0x0, status1=0x4, status2=0xc0020701 No TCO module detected. --- Settings --- Size (Latency): 2048 samples (2 periods of 8192 bytes) Line out: on ClearTrackMarker = off, Transmit in 64 Channel Mode, Auto Input off AutoSync Reference: Master Preferred Sync Reference: Word Clock System Clock Frequency: 48000 --- Status: Inputs MADI=NoLock, WordClock=NoLock AutoSync: Reference= Input not valid, Freq=0 (MADI = 0, Word = 0) Input: Coax, Mode=56 channels # cat /proc/asound/card1/hdspm RME MADI (Card #2) Rev.cf Status2first3bits: 1 HW Serial: 0xffffffffffff IRQ: 17 Registers bus: 0xfeb00000 VM: 0xffffc90011420000 --- System --- IRQ Pending: Audio=0, MIDI0=0, MIDI1=0, IRQcount=0 HW pointer: id = 0, rawptr = 0 (0->16320) estimated= 0 (bytes) MIDI FIFO: Out1=0x0, Out2=0x0, In1=0x0, In2=0x0 MIDIoverMADI FIFO: In=0x0, Out=0x0 Register: ctrl1=0x10044da, ctrl2=0x0, status1=0x1000004, status2=0xffff0701 No TCO module detected. --- Settings --- Size (Latency): 2048 samples (2 periods of 8192 bytes) Line out: on ClearTrackMarker = off, Transmit in 64 Channel Mode, Auto Input off AutoSync Reference: Master Preferred Sync Reference: Word Clock System Clock Frequency: 48000 --- Status: Inputs MADI=NoLock, WordClock=NoLock AutoSync: Reference= Input not valid, Freq=0 (MADI = 4, Word = 0) Input: Coax, Mode=56 channels # cat /proc/asound/card0/debug 0x00000000: 00000004 00000004 00000004 00000004 0x00000010: 00000004 00000004 00000004 00000004 0x00000020: 00000004 00000004 00000004 00000004 0x00000030: 00000004 00000004 00000004 00000004 0x00000040: 00000004 00000004 00000004 00000004 0x00000050: 00000004 00000004 00000004 00000004 0x00000060: 00000004 00000004 00000004 00000004 0x00000070: 00000004 00000004 00000004 00000004 0x00000080: 00000004 00000004 00000004 00000004 0x00000090: 00000004 00000004 00000004 00000004 0x000000A0: 00000004 00000004 00000004 00000004 0x000000B0: 00000004 00000004 00000004 00000004 0x000000C0: C0020701 C0020701 C0020701 C0020701 0x000000D0: C0020701 C0020701 C0020701 C0020701 0x000000E0: C0020701 C0020701 C0020701 C0020701 0x000000F0: C0020701 C0020701 C0020701 C0020701 # cat /proc/asound/card1/debug 0x00000000: 02800004 02800004 02800004 02800004 0x00000010: 02800004 02800004 02800004 02800004 0x00000020: 02800004 02800004 02800004 02800004 0x00000030: 02800004 02800004 02800004 02800004 0x00000040: 02800004 02800004 02800004 02800004 0x00000050: 02800004 02800004 02800004 02800004 0x00000060: 02800004 02800004 02800004 02800004 0x00000070: 02800004 02800004 02800004 02800004 0x00000080: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 0x00000090: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 0x000000A0: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 0x000000B0: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 0x000000C0: FFFF0701 FFFF0701 FFFF0701 FFFF0701 0x000000D0: FFFF0701 FFFF0701 FFFF0701 FFFF0701 0x000000E0: FFFF0701 FFFF0701 FFFF0701 FFFF0701 0x000000F0: FFFF0701 FFFF0701 FFFF0701 FFFF0701

2 1

[alsa-devel] [PATCH] ALSA: snd-usb: remove refactorization left-overs
by Daniel Mack 21 Apr '12

21 Apr '12

Drop some struct members and definitions that became obsolete during the refactorization of the driver. Signed-off-by: Daniel Mack <zonque(a)gmail.com> --- sound/usb/card.h | 13 ------------- sound/usb/proc.c | 6 +----- 2 files changed, 1 insertions(+), 18 deletions(-) diff --git a/sound/usb/card.h b/sound/usb/card.h index 77d2eec..0d37238 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -43,13 +43,6 @@ struct snd_urb_ctx { struct list_head ready_list; }; -struct snd_urb_ops { - int (*prepare)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u); - int (*retire)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u); - int (*prepare_sync)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u); - int (*retire_sync)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u); -}; - struct snd_usb_endpoint { struct snd_usb_audio *chip; @@ -125,11 +118,6 @@ struct snd_usb_substream { unsigned long active_mask; /* bitmask of active urbs */ unsigned long unlink_mask; /* bitmask of unlinked urbs */ - unsigned int nurbs; /* # urbs */ - struct snd_urb_ctx dataurb[MAX_URBS]; /* data urb table */ - struct snd_urb_ctx syncurb[SYNC_URBS]; /* sync urb table */ - char *syncbuf; /* sync buffer for all sync URBs */ - dma_addr_t sync_dma; /* DMA address of syncbuf */ /* data and sync endpoints for this stream */ struct snd_usb_endpoint *data_endpoint; struct snd_usb_endpoint *sync_endpoint; @@ -141,7 +129,6 @@ struct snd_usb_substream { struct snd_pcm_hw_constraint_list rate_list; /* limited rates */ spinlock_t lock; - struct snd_urb_ops ops; /* callbacks (must be filled at init) */ int last_frame_number; /* stored frame number */ int last_delay; /* stored delay */ }; diff --git a/sound/usb/proc.c b/sound/usb/proc.c index 06e23d8..ebc1a5b 100644 --- a/sound/usb/proc.c +++ b/sound/usb/proc.c @@ -25,6 +25,7 @@ #include "usbaudio.h" #include "helper.h" #include "card.h" +#include "endpoint.h" #include "proc.h" /* convert our full speed USB rate into sampling rate in Hz */ @@ -137,14 +138,9 @@ static void proc_dump_ep_status(struct snd_usb_substream *subs, static void proc_dump_substream_status(struct snd_usb_substream *subs, struct snd_info_buffer *buffer) { if (subs->running) { - unsigned int i; snd_iprintf(buffer, " Status: Running\n"); snd_iprintf(buffer, " Interface = %d\n", subs->interface); snd_iprintf(buffer, " Altset = %d\n", subs->altset_idx); - snd_iprintf(buffer, " URBs = %d [ ", subs->nurbs); - for (i = 0; i < subs->nurbs; i++) - snd_iprintf(buffer, "%d ", subs->dataurb[i].packets); - snd_iprintf(buffer, "]\n"); proc_dump_ep_status(subs, subs->data_endpoint, buffer); proc_dump_ep_status(subs, subs->sync_endpoint, buffer); } else { -- 1.7.5.4

2 1

[alsa-devel] Fast Track Ultra (8R): Sync source switch
by Felix Homann 20 Apr '12

20 Apr '12

Hi, I've taken a look again at the usbmon logs I posted some years ago. It seems that by switching the sync source you essentially tell the FTU to use a different altsetting for iface 2: Switching "Sync Source" from "Internal" to "External" (see last line): ffff8800662a60c0 3325542111 S Co:1:006:0 s 01 0b 0000 0001 0000 0 ffff8800662a60c0 3325543386 C Co:1:006:0 0 0 ffff88009159e740 3325594872 S Co:1:006:0 s 01 0b 0000 0002 0000 0 ffff88009159e740 3325596263 C Co:1:006:0 0 0 ffff8800a00d0900 3325633405 S Co:1:006:0 s 01 0b 0001 0001 0000 0 ffff8800a00d0900 3325633637 C Co:1:006:0 0 0 ffff88009159e440 3325644251 S Co:1:006:0 s 01 0b 0002 0002 0000 0 Switching "Sync Source" from "External" to "Internal" (see last line): ffff8800a00d0480 3349133460 S Co:1:006:0 s 01 0b 0000 0001 0000 0 ffff8800a00d0480 3349134696 C Co:1:006:0 0 0 ffff88009159e740 3349186489 S Co:1:006:0 s 01 0b 0000 0002 0000 0 ffff88009159e740 3349187696 C Co:1:006:0 0 0 ffff88009159e440 3349239544 S Co:1:006:0 s 01 0b 0001 0001 0000 0 ffff88009159e440 3349239823 C Co:1:006:0 0 0 ffff8800a00d0900 3349255385 S Co:1:006:0 s 01 0b 0001 0002 0000 0 If I haven't missed something we can achieve this by adding a quirk hook to either find_format() or set_format() in pcm.c. Daniel, can you think of a generic way to do this? (Note to all: can't test anything on this topic because I don't have a S/PDIF device here.) BTW, has anybody tested the mixer patch I posted a couple of days ago? Regards, Felix

2 1

Re: [alsa-devel] [PATCH] ASoC: omap-pcm: Free dma buffers in case of error.
by Ujfalusi, Peter 20 Apr '12

20 Apr '12

Hi, On Thu, Apr 19, 2012 at 3:37 AM, Oleg Matcovschi <oleg.matcovschi(a)ti.com> wrote: > Signed-off-by: Oleg Matcovschi <oleg.matcovschi(a)ti.com> > --- > sound/soc/omap/omap-pcm.c | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c > index a2a464f..380a5bd 100644 > --- a/sound/soc/omap/omap-pcm.c > +++ b/sound/soc/omap/omap-pcm.c > @@ -414,6 +414,10 @@ static int omap_pcm_new(struct snd_soc_pcm_runtime *rtd) > } > > out: > + /* free preallocated buffers in case of error */ > + if (ret) > + omap_pcm_free_dma_buffers(pcm); > + If the playback preallocation fails, or if only capture is supported on the dai link this is not needed. It only applies if we have both playback and capture streams and the capture preallocation fails. Luckily the omap_pcm_free_dma_buffers() has internal checks for these cases... Acked-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com>

2 1

[alsa-devel] [PATCH 0/8] Third edition of Ux500 ASoC-driver
by Ola Lilja 20 Apr '12

20 Apr '12

This is the third version and since last version there has been alot of rewriting and improvments. All according to the comments of Mark. Highlights: - Moved all regulator and clock-code from machine into codec. - Using DMA-engine PCM-interface. - Removed all virtual enum-switches to pin-switches. - Cleaned up I2S-abstraction and rearranged it in a better way. - Moved device-initialization into mach-tree. Kristoffer KARLSSON (2): ASoC: core: Add signed multi register control ASoC: core: Add strobe control Ola Lilja (6): ASoC: core: Add debug-print helper function arm: ux500: Add support for MSP I2S-devices ASoC: Ux500: Add MSP I2S-driver ASoC: Ux500: Add platform-driver ASoC: codecs: Add AB8500 codec-driver ASoC: Ux500: Add machine-driver arch/arm/mach-ux500/Makefile | 3 +- arch/arm/mach-ux500/board-mop500-msp.c | 250 +++ arch/arm/mach-ux500/board-mop500-msp.h | 14 + arch/arm/mach-ux500/board-mop500.c | 4 + arch/arm/mach-ux500/clock.c | 8 +- arch/arm/mach-ux500/devices-db8500.h | 10 - arch/arm/mach-ux500/include/mach/msp.h | 29 + include/sound/soc.h | 31 +- sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 3 + sound/soc/codecs/ab8500-codec.c | 3028 ++++++++++++++++++++++++++++++++ sound/soc/codecs/ab8500-codec.h | 603 +++++++ sound/soc/soc-core.c | 181 ++ sound/soc/soc-pcm.c | 9 + sound/soc/ux500/Kconfig | 34 + sound/soc/ux500/Makefile | 11 + sound/soc/ux500/u8500.c | 118 ++ sound/soc/ux500/ux500_ab8500.c | 225 +++ sound/soc/ux500/ux500_ab8500.h | 21 + sound/soc/ux500/ux500_msp_dai.c | 876 +++++++++ sound/soc/ux500/ux500_msp_dai.h | 80 + sound/soc/ux500/ux500_msp_i2s.c | 742 ++++++++ sound/soc/ux500/ux500_msp_i2s.h | 553 ++++++ sound/soc/ux500/ux500_pcm.c | 332 ++++ sound/soc/ux500/ux500_pcm.h | 42 + 27 files changed, 7198 insertions(+), 15 deletions(-) create mode 100644 arch/arm/mach-ux500/board-mop500-msp.c create mode 100644 arch/arm/mach-ux500/board-mop500-msp.h create mode 100644 arch/arm/mach-ux500/include/mach/msp.h create mode 100644 sound/soc/codecs/ab8500-codec.c create mode 100644 sound/soc/codecs/ab8500-codec.h create mode 100644 sound/soc/ux500/Kconfig create mode 100644 sound/soc/ux500/Makefile create mode 100644 sound/soc/ux500/u8500.c create mode 100644 sound/soc/ux500/ux500_ab8500.c create mode 100644 sound/soc/ux500/ux500_ab8500.h create mode 100644 sound/soc/ux500/ux500_msp_dai.c create mode 100644 sound/soc/ux500/ux500_msp_dai.h create mode 100644 sound/soc/ux500/ux500_msp_i2s.c create mode 100644 sound/soc/ux500/ux500_msp_i2s.h create mode 100644 sound/soc/ux500/ux500_pcm.c create mode 100644 sound/soc/ux500/ux500_pcm.h -- 1.7.8.3

1 0

[alsa-devel] [PATCH] ALSA: HDA: Add external mic quirk for Asus Zenbook UX31E
by David Henningsson 20 Apr '12

20 Apr '12

According to the reporter, external mic starts to work if the laptop-dmic model is used. According to BIOS pin config, all pins are consistent with the alc269vb_laptop_dmic fixup, except for the external mic, which is not present. Cc: stable(a)kernel.org BugLink: https://bugs.launchpad.net/bugs/950490 Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e65e354..818f90b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6109,6 +6109,7 @@ static const struct alc_fixup alc269_fixups[] = { static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_MIC2_MUTE_LED), + SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), -- 1.7.9.5

2 1

Re: [alsa-devel] M-Audio FastTrack C400
by Chris Cavey 19 Apr '12

19 Apr '12

Here we go - disconnect, reconnect, wait, disconnect, reconnect [ 81.626968] usb 1-1: USB disconnect, device number 2 [ 96.644352] usb 1-1: new high-speed USB device number 3 using ehci_hcd [ 96.854092] snd-usb-audio: probe of 1-1:1.1 failed with error -5 [ 96.860196] snd-usb-audio: probe of 1-1:1.2 failed with error -5 [ 96.869071] snd-usb-audio: probe of 1-1:1.3 failed with error -5 [ 96.886969] input: M-Audio Fast Track C400 as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input7 [ 96.887558] generic-usb 0003:0763:2030.0003: input,hidraw0: USB HID v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5 [ 132.340302] usb 1-1: USB disconnect, device number 3 [ 140.444314] usb 1-1: new high-speed USB device number 4 using ehci_hcd [ 140.665648] snd-usb-audio: probe of 1-1:1.1 failed with error -5 [ 140.671506] snd-usb-audio: probe of 1-1:1.2 failed with error -5 [ 140.680480] snd-usb-audio: probe of 1-1:1.3 failed with error -5 [ 140.695583] input: M-Audio Fast Track C400 as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input8 [ 140.696324] generic-usb 0003:0763:2030.0004: input,hidraw0: USB HID v1.10 Keyboard [M-Audio Fast Track C400] on usb-0000:00:0b.0-1/input5 On 04/19/2012 07:20 AM, Grant Diffey wrote: > oh... turn the interface off and on and give us the last 10 lines. > > On Thu, Apr 19, 2012 at 9:19 PM, Chris Cavey <chris-alsa(a)rauros.net > <mailto:chris-alsa@rauros.net>> wrote: > > entire log > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) > (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP > Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14) > [ 0.000000] Command line: > BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic > root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 > (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 > (reserved) > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 > (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 > (usable) > [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 > (ACPI data) > [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 > (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 > (usable) > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.5 present. > [ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox > 12/01/2006 > [ 0.000000] e820 update range: 0000000000000000 - > 0000000000010000 (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - > 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR variable ranges disabled: > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] CPU MTRRs all blank - virtualized system. > [ 0.000000] last_pfn = 0xdfff0 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [ffff88000009fff0] 9fff0 > [ 0.000000] initial memory mapped : 0 - 20000000 > [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 > size 20480 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfff0000 > [ 0.000000] 0000000000 - 00dfe00000 page 2M > [ 0.000000] 00dfe00000 - 00dfff0000 page 4k > [ 0.000000] kernel direct mapping tables up to dfff0000 @ > 1fffa000-20000000 > [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 > [ 0.000000] 0100000000 - 0120000000 page 2M > [ 0.000000] kernel direct mapping tables up to 120000000 @ > dffea000-dfff0000 > [ 0.000000] RAMDISK: 364ec000 - 3726e000 > [ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX ) > [ 0.000000] ACPI: XSDT 00000000dfff0030 0003C (v01 VBOX > VBOXXSDT 00000001 ASL 00000061) > [ 0.000000] ACPI: FACP 00000000dfff00f0 000F4 (v04 VBOX > VBOXFACP 00000001 ASL 00000061) > [ 0.000000] ACPI: DSDT 00000000dfff0480 01B96 (v01 VBOX > VBOXBIOS 00000002 INTL 20100528) > [ 0.000000] ACPI: FACS 00000000dfff0200 00040 > [ 0.000000] ACPI: APIC 00000000dfff0240 0006C (v02 VBOX > VBOXAPIC 00000001 ASL 00000061) > [ 0.000000] ACPI: SSDT 00000000dfff02b0 001CC (v01 VBOX > VBOXCPUT 00000002 INTL 20100528) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000120000000 > [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 > [ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff] > [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> > [ffff88011b600000-ffff88011f5fffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00120000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x000dfff0 > [ 0.000000] 0: 0x00100000 -> 0x00120000 > [ 0.000000] On node 0 totalpages: 1048447 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 5 pages reserved > [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 16320 pages used for memmap > [ 0.000000] DMA32 zone: 897072 pages, LIFO batch:31 > [ 0.000000] Normal zone: 2048 pages used for memmap > [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address > 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl > dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 > high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000f0000 > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - > 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000dfff0000 - > 00000000e0000000 > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - > 00000000fffc0000 > [ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - > 0000000100000000 > [ 0.000000] Allocating PCI resources starting at e0000000 (gap: > e0000000:1ffc0000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 > nr_cpu_ids:4 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 > s83072 r8192 d23424 u524288 > [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping > on. Total pages: 1030010 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic > root=UUID=ec96128d-feb6-40e6-a5aa-b55aa2219935 ro > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA > - bailing! > [ 0.000000] Memory: 4032084k/4718592k available (6566k kernel > code, 524804k absent, 161704k reserved, 6637k data, 920k init) > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, > MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] allocated 33554432 bytes of page_cgroup > [ 0.000000] please try 'cgroup_disable=memory' option if you > don't want memory cgroups > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 3385.153 MHz processor. > [ 0.004003] Calibrating delay loop (skipped), value calculated > using timer frequency.. 6770.30 BogoMIPS (lpj=13540612) > [ 0.004007] pid_max: default: 32768 minimum: 301 > [ 0.004023] Security Framework initialized > [ 0.004033] AppArmor: AppArmor initialized > [ 0.004035] Yama: becoming mindful. > [ 0.004588] Dentry cache hash table entries: 524288 (order: 10, > 4194304 bytes) > [ 0.005520] Inode-cache hash table entries: 262144 (order: 9, > 2097152 bytes) > [ 0.005792] Mount-cache hash table entries: 256 > [ 0.005903] Initializing cgroup subsys cpuacct > [ 0.005908] Initializing cgroup subsys memory > [ 0.005913] Initializing cgroup subsys devices > [ 0.005916] Initializing cgroup subsys freezer > [ 0.005918] Initializing cgroup subsys blkio > [ 0.005922] Initializing cgroup subsys perf_event > [ 0.006124] CPU: Physical Processor ID: 0 > [ 0.006127] CPU: Processor Core ID: 0 > [ 0.006143] mce: CPU supports 0 MCE banks > [ 0.024772] ACPI: Core revision 20110623 > [ 0.025296] ftrace: allocating 27049 entries in 107 pages > [ 0.036357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.076499] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz > stepping 07 > [ 0.080004] Performance Events: unsupported p6 CPU model 42 no > PMU driver, software events only. > [ 0.080004] NMI watchdog disabled (cpu0): hardware events not > enabled > [ 0.080004] Booting Node 0, Processors #1 > [ 0.080004] smpboot cpu 1: start_ip = 9a000 > [ 0.008000] mce: CPU supports 0 MCE banks > [ 0.168009] TSC synchronization [CPU#0 -> CPU#1]: > [ 0.168009] Measured 195227 cycles TSC warp between CPUs, > turning off TSC clock. > [ 0.168009] Marking TSC unstable due to check_tsc_sync_source > failed > [ 0.168030] NMI watchdog disabled (cpu1): hardware events not > enabled > [ 0.168227] #2 > [ 0.168228] smpboot cpu 2: start_ip = 9a000 > [ 0.008000] mce: CPU supports 0 MCE banks > [ 0.256324] NMI watchdog disabled (cpu2): hardware events not > enabled > [ 0.256528] #3 Ok. > [ 0.256529] smpboot cpu 3: start_ip = 9a000 > [ 0.008000] mce: CPU supports 0 MCE banks > [ 0.344331] NMI watchdog disabled (cpu3): hardware events not > enabled > [ 0.344371] Brought up 4 CPUs > [ 0.344373] Total of 4 processors activated (27145.08 BogoMIPS). > [ 0.345354] devtmpfs: initialized > [ 0.345354] EVM: security.selinux > [ 0.345354] EVM: security.SMACK64 > [ 0.345354] EVM: security.capability > [ 0.345354] print_constraints: dummy: > [ 0.345354] RTC time: 10:28:42, date: 04/19/12 > [ 0.345354] NET: Registered protocol family 16 > [ 0.345354] ACPI: bus type pci registered > [ 0.345354] PCI: Using configuration type 1 for base access > [ 0.345354] Trying to unpack rootfs image as initramfs... > [ 0.348353] bio: create slab <bio-0> at 0 > [ 0.348353] ACPI: Added _OSI(Module Device) > [ 0.348353] ACPI: Added _OSI(Processor Device) > [ 0.348353] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.348353] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.348353] ACPI: EC: Look up EC in DSDT > [ 0.348547] ACPI: Executed 1 blocks of module-level executable > AML code > [ 0.350447] ACPI: Interpreter enabled > [ 0.350450] ACPI: (supports S0 S5) > [ 0.350459] ACPI: Using IOAPIC for interrupt routing > [ 0.352692] ACPI: No dock devices found. > [ 0.352695] HEST: Table not found. > [ 0.352697] PCI: Ignoring host bridge windows from ACPI; if > necessary, use "pci=use_crs" and report a bug > [ 0.352738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.352813] pci_root PNP0A03:00: host bridge window [io > 0x0000-0x0cf7] (ignored) > [ 0.352815] pci_root PNP0A03:00: host bridge window [io > 0x0d00-0xffff] (ignored) > [ 0.352816] pci_root PNP0A03:00: host bridge window [mem > 0x000a0000-0x000bffff] (ignored) > [ 0.352818] pci_root PNP0A03:00: host bridge window [mem > 0xe0000000-0xffdfffff] (ignored) > [ 0.352852] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600 > [ 0.353150] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601 > [ 0.353567] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101 > [ 0.353885] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f] > [ 0.354120] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300 > [ 0.356449] pci 0000:00:02.0: reg 10: [mem > 0xe0000000-0xe0ffffff pref] > [ 0.372789] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200 > [ 0.372900] pci 0000:00:03.0: reg 10: [io 0xd020-0xd03f] > [ 0.373432] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880 > [ 0.376229] pci 0000:00:04.0: reg 10: [io 0xd040-0xd05f] > [ 0.380229] pci 0000:00:04.0: reg 14: [mem 0xf0000000-0xf03fffff] > [ 0.382891] pci 0000:00:04.0: reg 18: [mem > 0xf0400000-0xf0403fff pref] > [ 0.392444] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03 > [ 0.396234] pci 0000:00:06.0: reg 10: [mem 0xf0404000-0xf0404fff] > [ 0.411054] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680 > [ 0.412109] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03 > [ 0.414940] pci 0000:00:0b.0: reg 10: [mem 0xf0405000-0xf0405fff] > [ 0.431155] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106 > [ 0.432285] pci 0000:00:0d.0: reg 10: [io 0xd060-0xd067] > [ 0.440252] pci 0000:00:0d.0: reg 18: [io 0xd070-0xd077] > [ 0.444431] pci 0000:00:0d.0: reg 20: [io 0xd080-0xd08f] > [ 0.448447] pci 0000:00:0d.0: reg 24: [mem 0xf0406000-0xf0407fff] > [ 0.453161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.454249] pci0000:00: Unable to request _OSC control (_OSC > support mask: 0x1e) > [ 0.460028] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11) > [ 0.460448] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11) > [ 0.460566] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11) > [ 0.460681] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11) > [ 0.461127] vgaarb: device added: > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.461127] vgaarb: loaded > [ 0.461127] vgaarb: bridge control possible 0000:00:02.0 > [ 0.461127] i2c-core: driver [aat2870] using legacy suspend method > [ 0.461127] i2c-core: driver [aat2870] using legacy resume method > [ 0.461127] SCSI subsystem initialized > [ 0.461127] libata version 3.00 loaded. > [ 0.461127] usbcore: registered new interface driver usbfs > [ 0.461127] usbcore: registered new interface driver hub > [ 0.461127] usbcore: registered new device driver usb > [ 0.461127] PCI: Using ACPI for IRQ routing > [ 0.461127] PCI: pci_cache_line_size set to 64 bytes > [ 0.461127] reserve RAM buffer: 000000000009fc00 - 000000000009ffff > [ 0.461127] reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff > [ 0.461127] NetLabel: Initializing > [ 0.461127] NetLabel: domain hash size = 128 > [ 0.461127] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.461127] NetLabel: unlabeled traffic allowed by default > [ 0.469329] AppArmor: AppArmor Filesystem Enabled > [ 0.469352] pnp: PnP ACPI init > [ 0.469365] ACPI: bus type pnp registered > [ 0.469424] pnp 00:00: [bus 00-ff] > [ 0.469425] pnp 00:00: [io 0x0cf8-0x0cff] > [ 0.469427] pnp 00:00: [io 0x0000-0x0cf7 window] > [ 0.469428] pnp 00:00: [io 0x0d00-0xffff window] > [ 0.469431] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 0.469432] pnp 00:00: [mem 0xe0000000-0xffdfffff window] > [ 0.469454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 > (active) > [ 0.469465] pnp 00:01: [io 0x0060] > [ 0.469466] pnp 00:01: [io 0x0064] > [ 0.469492] pnp 00:01: [irq 1] > [ 0.469507] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 > (active) > [ 0.469513] pnp 00:02: [io 0x0000-0x000f] > [ 0.469514] pnp 00:02: [io 0x0080-0x008f] > [ 0.469515] pnp 00:02: [io 0x00c0-0x00df] > [ 0.469516] pnp 00:02: [dma 4] > [ 0.469527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 > (active) > [ 0.469569] pnp 00:03: [irq 12] > [ 0.469584] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 > (active) > [ 0.469593] pnp 00:04: [io 0x0378-0x037f] > [ 0.469594] pnp 00:04: [io 0x0778-0x077f] > [ 0.469612] pnp 00:04: [irq 7] > [ 0.469626] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 > (active) > [ 0.469954] pnp: PnP ACPI: found 5 devices > [ 0.469956] ACPI: ACPI bus type pnp unregistered > [ 0.479843] Switching to clocksource acpi_pm > [ 0.479942] PCI: max bus depth: 0 pci_try_num: 1 > [ 0.479960] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > [ 0.479964] pci_bus 0000:00: resource 1 [mem > 0x00000000-0xfffffffff] > [ 0.479989] NET: Registered protocol family 2 > [ 0.479989] IP route cache hash table entries: 131072 (order: > 8, 1048576 bytes) > [ 0.479989] TCP established hash table entries: 524288 (order: > 11, 8388608 bytes) > [ 0.479989] TCP bind hash table entries: 65536 (order: 8, > 1048576 bytes) > [ 0.479989] TCP: Hash tables configured (established 524288 > bind 65536) > [ 0.479989] TCP reno registered > [ 0.479989] UDP hash table entries: 2048 (order: 4, 65536 bytes) > [ 0.479989] UDP-Lite hash table entries: 2048 (order: 4, 65536 > bytes) > [ 0.479989] NET: Registered protocol family 1 > [ 0.479989] pci 0000:00:00.0: Limiting direct PCI/PCI transfers > [ 0.479989] pci 0000:00:01.0: Activating ISA DMA hang workarounds > [ 0.479989] pci 0000:00:02.0: Boot video device > [ 0.479989] pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) > -> IRQ 22 > [ 0.536224] pci 0000:00:06.0: PCI INT A disabled > [ 0.536281] pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) > -> IRQ 19 > [ 0.536419] pci 0000:00:0b.0: PCI INT A disabled > [ 0.536438] PCI: CLS 64 bytes, default 64 > [ 0.536440] PCI-DMA: Using software bounce buffering for IO > (SWIOTLB) > [ 0.536442] Placing 64MB software IO TLB between > ffff8800dbfea000 - ffff8800dffea000 > [ 0.536445] software IO TLB at phys 0xdbfea000 - 0xdffea000 > [ 0.536534] platform rtc_cmos: registered platform RTC device > (no PNP device found) > [ 0.537218] audit: initializing netlink socket (disabled) > [ 0.537228] type=2000 audit(1334831321.536:1): initialized > [ 0.559691] HugeTLB registered 2 MB page size, pre-allocated 0 > pages > [ 0.569424] VFS: Disk quotas dquot_6.5.2 > [ 0.569466] Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) > [ 0.570011] fuse init (API version 7.17) > [ 0.570131] msgmni has been set to 7875 > [ 0.571849] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 253) > [ 0.571976] io scheduler noop registered > [ 0.571979] io scheduler deadline registered > [ 0.572009] io scheduler cfq registered (default) > [ 0.572158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.572176] pciehp: PCI Express Hot Plug Controller Driver > version: 0.4 > [ 0.572258] ACPI: Deprecated procfs I/F for AC is loaded, > please retry with CONFIG_ACPI_PROCFS_POWER cleared > [ 0.572298] ACPI: AC Adapter [AC] (on-line) > [ 0.572375] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > [ 0.572380] ACPI: Power Button [PWRF] > [ 0.572433] input: Sleep Button as > /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 > [ 0.572437] ACPI: Sleep Button [SLPF] > [ 0.573452] ERST: Table is not found! > [ 0.573454] GHES: HEST is not enabled! > [ 0.573530] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 > (level, low) -> IRQ 19 > [ 0.573727] Serial: 8250/16550 driver, 32 ports, IRQ sharing > enabled > [ 0.605871] Freeing initrd memory: 13832k freed > [ 1.248951] Linux agpgart interface v0.103 > [ 1.254544] brd: module loaded > [ 1.256947] loop: module loaded > [ 1.257314] ahci 0000:00:0d.0: version 3.0 > [ 1.257415] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) > -> IRQ 21 > [ 1.257633] ahci: SSS flag set, parallel bus scan disabled > [ 1.257942] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports > 3 Gbps 0x1 impl SATA mode > [ 1.257951] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc > [ 1.258674] scsi0 : ahci > [ 1.258767] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port > 0xf0406100 irq 21 > [ 1.258844] ata_piix 0000:00:01.1: version 2.13 > [ 1.259824] scsi1 : ata_piix > [ 1.260317] scsi2 : ata_piix > [ 1.260374] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma > 0xd000 irq 14 > [ 1.260380] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma > 0xd008 irq 15 > [ 1.260804] Fixed MDIO Bus: probed > [ 1.260817] tun: Universal TUN/TAP device driver, 1.6 > [ 1.260818] tun: (C) 1999-2004 Max Krasnyansky > <maxk(a)qualcomm.com <mailto:maxk@qualcomm.com>> > [ 1.261638] PPP generic driver version 2.4.2 > [ 1.262079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > Driver > [ 1.262122] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, > low) -> IRQ 19 > [ 1.262195] ehci_hcd 0000:00:0b.0: EHCI Host Controller > [ 1.262430] ehci_hcd 0000:00:0b.0: new USB bus registered, > assigned bus number 1 > [ 1.262761] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0405000 > [ 1.272188] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00 > [ 1.272644] hub 1-0:1.0: USB hub found > [ 1.272654] hub 1-0:1.0: 8 ports detected > [ 1.272827] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.272898] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, > low) -> IRQ 22 > [ 1.272984] ohci_hcd 0000:00:06.0: OHCI Host Controller > [ 1.273269] ohci_hcd 0000:00:06.0: new USB bus registered, > assigned bus number 2 > [ 1.273417] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000 > [ 1.329002] hub 2-0:1.0: USB hub found > [ 1.329032] hub 2-0:1.0: 8 ports detected > [ 1.329525] uhci_hcd: USB Universal Host Controller Interface > driver > [ 1.329601] usbcore: registered new interface driver libusual > [ 1.329655] i8042: PNP: PS/2 Controller > [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > [ 1.330733] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.330748] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.331290] mousedev: PS/2 mouse device common for all mice > [ 1.332223] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input2 > [ 1.332913] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as > rtc0 > [ 1.333075] rtc0: alarms up to one day, 114 bytes nvram > [ 1.333222] device-mapper: uevent: version 1.0.3 > [ 1.333528] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) > initialised: dm-devel(a)redhat.com <mailto:dm-devel@redhat.com> > [ 1.333559] cpuidle: using governor ladder > [ 1.333563] cpuidle: using governor menu > [ 1.333567] EFI Variables Facility v0.08 2004-May-17 > [ 1.333859] TCP cubic registered > [ 1.334011] NET: Registered protocol family 10 > [ 1.334802] NET: Registered protocol family 17 > [ 1.334835] Registering the dns_resolver key type > [ 1.335954] PM: Hibernation image not present or could not be > loaded. > [ 1.335973] registered taskstats version 1 > [ 1.360349] Magic number: 8:400:477 > [ 1.360600] rtc_cmos rtc_cmos: setting system clock to > 2012-04-19 10:28:43 UTC (1334831323) > [ 1.360808] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 1.360813] EDD information not available. > [ 1.417071] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 > [ 1.418236] ata3.00: configured for UDMA/33 > [ 1.576294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.576442] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 > [ 1.576449] ata1.00: 16777216 sectors, multi 128: LBA48 NCQ > (depth 31/32) > [ 1.576637] ata1.00: configured for UDMA/133 > [ 1.577145] scsi 0:0:0:0: Direct-Access ATA VBOX > HARDDISK 1.0 PQ: 0 ANSI: 5 > [ 1.577596] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 1.577628] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: > (8.58 GB/8.00 GiB) > [ 1.578323] sd 0:0:0:0: [sda] Write Protect is off > [ 1.578332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.578580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 1.578765] scsi 2:0:0:0: CD-ROM VBOX CD-ROM > 1.0 PQ: 0 ANSI: 5 > [ 1.579836] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray > [ 1.579853] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 1.580258] sr 2:0:0:0: Attached scsi CD-ROM sr0 > [ 1.580557] sr 2:0:0:0: Attached scsi generic sg1 type 5 > [ 1.581366] sda: sda1 sda2 < sda5 > > [ 1.583094] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.584231] usb 1-1: new high-speed USB device number 2 using > ehci_hcd > [ 1.585305] Freeing unused kernel memory: 920k freed > [ 1.585472] Write protecting the kernel read-only data: 12288k > [ 1.593051] Freeing unused kernel memory: 1608k freed > [ 1.599031] Freeing unused kernel memory: 1196k freed > [ 1.637534] udevd[101]: starting version 175 > [ 1.771768] EXT4-fs (sda1): mounted filesystem with ordered > data mode. Opts: (null) > [ 1.874977] hrtimer: interrupt took 107977688 ns > [ 2.224241] usb 2-1: new full-speed USB device number 2 using > ohci_hcd > [ 4.998829] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 5.015680] udevd[296]: starting version 175 > [ 5.046608] Adding 4192252k swap on /dev/sda5. Priority:-1 > extents:1 across:4192252k > [ 5.084794] piix4_smbus 0000:00:07.0: SMBus base address > uninitialized - upgrade BIOS or use force_addr=0xaddr > [ 5.090614] lp: driver loaded but no devices found > [ 5.096851] type=1400 audit(1334831327.232:2): > apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" > pid=359 comm="apparmor_parser" > [ 5.097421] type=1400 audit(1334831327.232:3): > apparmor="STATUS" operation="profile_load" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 > comm="apparmor_parser" > [ 5.097656] type=1400 audit(1334831327.232:4): > apparmor="STATUS" operation="profile_load" > name="/usr/lib/connman/scripts/dhclient-script" pid=359 > comm="apparmor_parser" > [ 5.142805] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) > -> IRQ 20 > [ 5.148416] input: M-Audio Fast Track C400 as > /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.5/input/input3 > [ 5.150294] input: Unspecified device as > /devices/virtual/input/input4 > [ 5.151404] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at > 00000000f0000000 (size 0x400000) > [ 5.151407] vboxguest: Successfully loaded version 4.1.12 > (interface 0x00010004) > [ 5.153200] generic-usb 0003:0763:2030.0001: input,hidraw0: USB > HID v1.10 Keyboard [M-Audio Fast Track C400] on > usb-0000:00:0b.0-1/input5 > [ 5.154104] input: ImExPS/2 Generic Explorer Mouse as > /devices/platform/i8042/serio1/input/input5 > [ 5.173055] parport_pc 00:04: reported by Plug and Play ACPI > [ 5.176070] input: VirtualBox USB Tablet as > /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6 > [ 5.176363] generic-usb 0003:80EE:0021.0002: input,hidraw1: USB > HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 > [ 5.176376] usbcore: registered new interface driver usbhid > [ 5.176377] usbhid: USB HID core driver > [ 5.193484] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro > [ 5.197201] ppdev: user-space parallel port driver > [ 5.284929] snd-usb-audio: probe of 1-1:1.1 failed with error -5 > [ 5.290898] snd-usb-audio: probe of 1-1:1.2 failed with error -5 > [ 5.296928] snd-usb-audio: probe of 1-1:1.3 failed with error -5 > [ 5.303749] usbcore: registered new interface driver snd-usb-audio > [ 5.568497] vesafb: mode is 640x480x32, linelength=2560, pages=0 > [ 5.568501] vesafb: scrolling: redraw > [ 5.568505] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 5.568573] mtrr: your processor doesn't support write-combining > [ 5.568906] vesafb: framebuffer at 0xe0000000, mapped to > 0xffffc90003f00000, using 1216k, total 1216k > [ 5.569237] Console: switching to colour frame buffer device 80x30 > [ 5.573612] fb0: VESA VGA frame buffer device > [ 7.628873] init: failsafe main process (676) killed by TERM signal > [ 7.686842] type=1400 audit(1334831329.820:5): > apparmor="STATUS" operation="profile_load" > name="/usr/sbin/tcpdump" pid=856 comm="apparmor_parser" > [ 7.686955] type=1400 audit(1334831329.820:6): > apparmor="STATUS" operation="profile_replace" > name="/sbin/dhclient" pid=854 comm="apparmor_parser" > [ 7.687523] type=1400 audit(1334831329.820:7): > apparmor="STATUS" operation="profile_replace" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854 > comm="apparmor_parser" > [ 7.687836] type=1400 audit(1334831329.820:8): > apparmor="STATUS" operation="profile_replace" > name="/usr/lib/connman/scripts/dhclient-script" pid=854 > comm="apparmor_parser" > [ 7.881629] vboxsf: Successfully loaded version 4.1.12 > (interface 0x00010004) > [ 15.552201] eth0: no IPv6 routers present > > > > On 4/19/2012 7:09 AM, Grant Diffey wrote: > > On Thu, Apr 19, 2012 at 8:26 PM, Chris > Cavey<chris-alsa(a)rauros.net <mailto:chris-alsa@rauros.net>> > wrote: > > Complete snippet from the log > > [ 374.104138] usbcore: deregistering interface driver > snd-usb-audio > [ 374.875660] snd-usb-audio: probe of 1-1:1.1 failed with > error -5 > [ 374.881649] snd-usb-audio: probe of 1-1:1.2 failed with > error -5 > [ 374.887654] snd-usb-audio: probe of 1-1:1.3 failed with > error -5 > [ 374.895366] usbcore: registered new interface driver > snd-usb-audio > > Sidenote - While I don't have a midi device to test with, > it would > appear that the midi portion registers correctly and is > accessible (at > least through amidi and aplaymidi) > > On 04/19/2012 04:53 AM, Clemens Ladisch wrote: > > Chris Cavey wrote: > > snd-usb-audio: probe of 1-1:1.1 failed with error -5 > snd-usb-audio: probe of 1-1:1.2 failed with error -5 > snd-usb-audio: probe of 1-1:1.3 failed with error -5 > > Are there no other messages immediately before this? > > > that looks like a snippet on unload can I have another 10 > lines either side? > _______________________________________________ > Alsa-devel mailing list > Alsa-devel(a)alsa-project.org <mailto:Alsa-devel@alsa-project.org> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel(a)alsa-project.org <mailto:Alsa-devel@alsa-project.org> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > >

1 0

Re: [alsa-devel] [english 100%] Re: Steinberg CMC
by Clemens Ladisch 19 Apr '12

19 Apr '12

Patrick wrote: > Probably 1062 1063 1064 are the CMC- FD PD and QC but in which order? The important information is the ID. The name can be read from the device's descriptors; this parameter is there just to allow overriding it. > I understand the patch is trivial it is three lines to add. But I need to > get the development version to submit it. Otherwise if in the meantime the > 105f and the 1066 are entered, my patch will return an error. > > ... or can the maintainers do it? Such conflicts would be trivial to resolve. Regards, Clemens

1 0