May 2011 - Alsa-devel - mailman.alsa-project.org

[PATCH] ALSA: HDA: Use one dmic only for Dell Studio 1558
by David Henningsson 16 May '11

16 May '11

There are no signs of a dmic at node 0x0b, so the user is left with an additional internal mic which does not exist. This commit removes that non-existing mic. Cc: stable(a)kernel.org (2.6.32+) BugLink: http://bugs.launchpad.net/bugs/731706 Reported-by: James Page <james.page(a)canonical.com> Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a2884bb..38f4317 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1604,7 +1604,7 @@ static const struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02fe, "Dell Studio XPS 1645", STAC_DELL_M6_BOTH), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0413, - "Dell Studio 1558", STAC_DELL_M6_BOTH), + "Dell Studio 1558", STAC_DELL_M6_DMIC), {} /* terminator */ }; -- 1.7.4.1 --------------080400010105080501090504--

1 0

Re: [alsa-devel] iMac12,2 cirrus_patch.c model detection
by Jérémy Lal 16 May '11

16 May '11

On 15/05/2011 11:53, Takashi Iwai wrote: > At Sun, 15 May 2011 10:20:10 +0200, > Jérémy Lal wrote: >> >> Hi, >> the imac12,2 27" (model name iMac12,2 from may 2011), >> has some headphones bug with your latest patch (the one that adds model=imac27). >> More precisions at : >> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5364 >> >> I cooked a dirty patch (that fixes all controls that i can test, that is >> all analog in/out) and attached it in that bug report. >> However, since lspci reports subsystem 0x8086, 0x7270 too, >> i can't make that model auto-detected without killing your imac27 >> patch, see bug report. > > The bug tracking system is almost broken and actually no developer > is using it. I proposed to shut it down many times, but it's still > present, unfortunately. > > Could you post your results to alsa-devel ML and continue discussing > there? cc-ing alsa-devel, then. >> Would you have some advice to make it properly detect "my" model ? > > Create a table of codec SSID (not PCI SSID) and check the model via > snd_hda_check_board_codec_sid_config() first, then use > snd_hda_check_board_config() when no matching entry is found, as > fallback. That makes sense, and i'll use patch_realtek.c as an example. I'm inexperimented in C or alsa, though, so i might fail doing this. > Of course, this assumes that the codec SSID is unique. > Hopefully Apple does something right, at least. I don't get what you mean. Anyway bootcamp ships with the cirrus driver for windows, which lists all vendor/dev/subsys supported ids, with all configurations for pins, gpio, and other stuff i don't understand. It's tempting to use that to cover all actual models... I'd need to get a minimal knowledge of how intel hda and associated chips like cirrus work together. Any advice, beginner's guide ? Jérémy Lal

2 1

[alsa-devel] [PATCH v2 0/5] ASoC: OMAP4: Add support for HDMI audio
by Ricardo Neri 15 May '11

15 May '11

This is to add support for HDMI audio on OMAP4 chips. This work has two parts: DSS implementation and ASoC implementation. This set of patches presents the ASoC implementation. The approach is to utilize the DSS HDMI driver to act as an ASoC codec. This set of patches adds the ASoC CPU DAI and machine drivers. These drivers will utilize the ASoC HDMI codec provided in the DSS HDMI driver. DSS part of the implementation is currently under review in the linux-omap list. The DSS HDMI driver controls the availability of HDMI output and audio can be played only when the HDMI video device is enabled and the video timing in use is one of the CEA-861-D video timings supported by the OMAP4 HDMI IP. This implementation is for Basic Audio as defined in CEA-861-D: 16 bit/sample linear PCM 2-channel audio with sample rates of 32, 44.1 and 48kHz. As described in the HDMI specification, support for Basic Audio is mandatory for HDMI sinks and does not require of EDID parsing. Additionally, this implementation supports 24-bit samples in 32-bit words. Further audio capabilities such as more sample rates and multichannel audio will be added in the future when EDID parsing is available for HDMI driver. This implementation is based on on: * OMAP4: DSS2: Add dss_dss_clk opt clock for OMAP4, by Sumit Semwal (http://gitorious.org/linux-omap-dss2/linux/commit/0da5637569bb9bf93e6930cd1…) * Kernel 2.6.39-rc7 (git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git v2.6.39-rc7) * v1 of OMAP4: DSS2: HDMI: Add support for audio http://www.mail-archive.com/linux-omap@vger.kernel.org/msg49011.html In order to validate functionality, it is necessary to utilize the DSS HDMI ASoC codec. The complete implementation, DSS and ASoC parts, is available at: git://gitorious.org/omap-audio/linux-audio.git ricardon/topic/hdmi-audio-v2 Validation was performed on HDMI TV. Penguins were present on the display and audio playback was performed with aplay at 32, 44.1 and 48kHz with S16_LE and S24_LE sample formats. Validation was performed on SDP4430 ES2.1 and ES2.2 and Panda ES2.1 and ES2.0. Changes from V1: 1. Moved check of HDMI power state from CPU DAI start-up to machine hw_params. 2. Improved error handling when checking HDMI power-state. 3. Removed build-time conditionals for HDMI devices. 4. Added MODULE_ALIASes to drivers. 5. Merged CPU DAI header patch with its driver patch. 6. Use dev_err to print error messages. 7. Removed unnecessary calls to set_drvdata. 8. Corrected e-mail addresses of authors. 9. Corrected indentation. Ricardo Neri (5): OMAP4: HDMI: Add OMAP device for HDMI audio CPU DAI OMAP4: Add device for HDMI OMAP4 audio for ASoC machine driver ASoC: OMAP: Add CPU DAI driver for HDMI ASoC: OMAP4: Add HDMI Audio machine driver for OMAP4 boards ASoC: OMAP: Update Makefile and Kconfig for HDMI audio arch/arm/mach-omap2/devices.c | 26 ++++++ sound/soc/omap/Kconfig | 11 +++ sound/soc/omap/Makefile | 4 + sound/soc/omap/omap-hdmi.c | 158 ++++++++++++++++++++++++++++++++++++++ sound/soc/omap/omap-hdmi.h | 36 +++++++++ sound/soc/omap/omap4-hdmi-card.c | 129 +++++++++++++++++++++++++++++++ 6 files changed, 364 insertions(+), 0 deletions(-) create mode 100644 sound/soc/omap/omap-hdmi.c create mode 100644 sound/soc/omap/omap-hdmi.h create mode 100644 sound/soc/omap/omap4-hdmi-card.c

2 8

[alsa-devel] [PATCH] ASoC: Ensure output PGA is enabled for line outputs in wm_hubs
by Mark Brown 15 May '11

15 May '11

Also fix a left/right typo while we're at it. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm_hubs.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 4005e9a..c7c2fec 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -787,17 +787,17 @@ static const struct snd_soc_dapm_route analogue_routes[] = { static const struct snd_soc_dapm_route lineout1_diff_routes[] = { { "LINEOUT1 Mixer", "IN1L Switch", "IN1L PGA" }, { "LINEOUT1 Mixer", "IN1R Switch", "IN1R PGA" }, - { "LINEOUT1 Mixer", "Output Switch", "Left Output Mixer" }, + { "LINEOUT1 Mixer", "Output Switch", "Left Output PGA" }, { "LINEOUT1N Driver", NULL, "LINEOUT1 Mixer" }, { "LINEOUT1P Driver", NULL, "LINEOUT1 Mixer" }, }; static const struct snd_soc_dapm_route lineout1_se_routes[] = { - { "LINEOUT1N Mixer", "Left Output Switch", "Left Output Mixer" }, - { "LINEOUT1N Mixer", "Right Output Switch", "Left Output Mixer" }, + { "LINEOUT1N Mixer", "Left Output Switch", "Left Output PGA" }, + { "LINEOUT1N Mixer", "Right Output Switch", "Right Output PGA" }, - { "LINEOUT1P Mixer", "Left Output Switch", "Left Output Mixer" }, + { "LINEOUT1P Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" }, { "LINEOUT1P Driver", NULL, "LINEOUT1P Mixer" }, @@ -806,17 +806,17 @@ static const struct snd_soc_dapm_route lineout1_se_routes[] = { static const struct snd_soc_dapm_route lineout2_diff_routes[] = { { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" }, { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" }, - { "LINEOUT2 Mixer", "Output Switch", "Right Output Mixer" }, + { "LINEOUT2 Mixer", "Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" }, { "LINEOUT2P Driver", NULL, "LINEOUT2 Mixer" }, }; static const struct snd_soc_dapm_route lineout2_se_routes[] = { - { "LINEOUT2N Mixer", "Left Output Switch", "Left Output Mixer" }, - { "LINEOUT2N Mixer", "Right Output Switch", "Left Output Mixer" }, + { "LINEOUT2N Mixer", "Left Output Switch", "Left Output PGA" }, + { "LINEOUT2N Mixer", "Right Output Switch", "Right Output PGA" }, - { "LINEOUT2P Mixer", "Right Output Switch", "Right Output Mixer" }, + { "LINEOUT2P Mixer", "Right Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" }, { "LINEOUT2P Driver", NULL, "LINEOUT2P Mixer" }, -- 1.7.5.1

1 0

[alsa-devel] [PATCH] ASoC: Ensure output PGA is enabled for line outputs in wm_hubs
by Mark Brown 15 May '11

15 May '11

Also fix a left/right typo while we're at it. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm_hubs.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 4005e9a..7d674ee 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -787,17 +787,17 @@ static const struct snd_soc_dapm_route analogue_routes[] = { static const struct snd_soc_dapm_route lineout1_diff_routes[] = { { "LINEOUT1 Mixer", "IN1L Switch", "IN1L PGA" }, { "LINEOUT1 Mixer", "IN1R Switch", "IN1R PGA" }, - { "LINEOUT1 Mixer", "Output Switch", "Left Output Mixer" }, + { "LINEOUT1 Mixer", "Output Switch", "Left Output PGA" }, { "LINEOUT1N Driver", NULL, "LINEOUT1 Mixer" }, { "LINEOUT1P Driver", NULL, "LINEOUT1 Mixer" }, }; static const struct snd_soc_dapm_route lineout1_se_routes[] = { - { "LINEOUT1N Mixer", "Left Output Switch", "Left Output Mixer" }, - { "LINEOUT1N Mixer", "Right Output Switch", "Left Output Mixer" }, + { "LINEOUT1N Mixer", "Left Output Switch", "Left Output PGA" }, + { "LINEOUT1N Mixer", "Right Output Switch", "Right Output PGA" }, - { "LINEOUT1P Mixer", "Left Output Switch", "Left Output Mixer" }, + { "LINEOUT1P Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" }, { "LINEOUT1P Driver", NULL, "LINEOUT1P Mixer" }, @@ -806,17 +806,17 @@ static const struct snd_soc_dapm_route lineout1_se_routes[] = { static const struct snd_soc_dapm_route lineout2_diff_routes[] = { { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" }, { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" }, - { "LINEOUT2 Mixer", "Output Switch", "Right Output Mixer" }, + { "LINEOUT2 Mixer", "Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" }, { "LINEOUT2P Driver", NULL, "LINEOUT2 Mixer" }, }; static const struct snd_soc_dapm_route lineout2_se_routes[] = { - { "LINEOUT2N Mixer", "Left Output Switch", "Left Output Mixer" }, - { "LINEOUT2N Mixer", "Right Output Switch", "Left Output Mixer" }, + { "LINEOUT2N Mixer", "Left Output Switch", "Left Output PGA" }, + { "LINEOUT2N Mixer", "Right Output Switch", "Left Output PGA" }, - { "LINEOUT2P Mixer", "Right Output Switch", "Right Output Mixer" }, + { "LINEOUT2P Mixer", "Right Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" }, { "LINEOUT2P Driver", NULL, "LINEOUT2P Mixer" }, -- 1.7.5.1

2 2

[alsa-devel] X-Fi Surround 5.1 USB Remote Control LIRC config file
by roiman＠rambler.ru 15 May '11

15 May '11

Hi, all. Here is content of LIRC config file lircd.conf with IR-codes for X-Fi Surround 5.1 USB remote control. All buttons (include volume knob) works fine with Alsa driver 1.0.24 and LIRC 0.9.0. Wiki-page (http://alsa.opensrc.org/Usb-audio#Creative_USB_X-Fi_Surround_5.1) for this card presents information about button codes only for volume knob on this card. Because of this information may be useful, I think. Thanks, guys, for your work. Roman. ----------------------------------------------- ----------------------------------------------- begin remote name X-F.Surround-5.1.Remote.Control bits 8 gap 300000 begin codes knob-mute 0x0d knob-vol- 0x0f knob-vol+ 0x10 power 0x29 mute 0x2a vol+ 0x2b vol- 0x2c menu-back 0x2d display 0x2e play-pause 0x2f ok 0x30 up 0x31 down 0x32 prev 0x33 next 0x34 cmss3d-on 0x37 cmss3d-off 0x38 cryst-on 0x39 cryst-off 0x3a shuffle 0x3b repeat 0x3c end codes end remote ----------------------------------------------- -----------------------------------------------

1 0

[alsa-devel] [PATCH] fm801: clean-up radio-related Kconfig
by Ondrej Zary 15 May '11

15 May '11

Change the weird SND_FM801_TEA575X_BOOL define in Kconfig to SND_FM801_RADIO and remove TEA575X_RADIO define from fm801.c. Also update help text to include all supported cards. Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- linux-2.6.39-rc2-/sound/pci/Kconfig 2011-05-13 19:36:27.000000000 +0200 +++ linux-2.6.39-rc2/sound/pci/Kconfig 2011-05-13 19:23:00.000000000 +0200 @@ -554,18 +554,18 @@ config SND_FM801 To compile this driver as a module, choose M here: the module will be called snd-fm801. -config SND_FM801_TEA575X_BOOL +config SND_FM801_RADIO bool "ForteMedia FM801 + TEA5757 tuner" depends on SND_FM801 depends on VIDEO_V4L2=y || VIDEO_V4L2=SND_FM801 help Say Y here to include support for soundcards based on the ForteMedia - FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media - Forte SF256-PCS-02) into the snd-fm801 driver. + FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and + SF64-PCR) into the snd-fm801 driver. config SND_TEA575X tristate - depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO + depends on SND_FM801_RADIO || SND_ES1968_RADIO default SND_FM801 || SND_ES1968 source "sound/pci/hda/Kconfig" --- linux-2.6.39-rc2-/sound/pci/fm801.c 2011-05-13 19:39:23.000000000 +0200 +++ linux-2.6.39-rc2/sound/pci/fm801.c 2011-05-13 19:22:20.000000000 +0200 @@ -36,9 +36,8 @@ #include <asm/io.h> -#ifdef CONFIG_SND_FM801_TEA575X_BOOL +#ifdef CONFIG_SND_FM801_RADIO #include <sound/tea575x-tuner.h> -#define TEA575X_RADIO 1 #endif MODULE_AUTHOR("Jaroslav Kysela <perex(a)perex.cz>"); @@ -196,7 +195,7 @@ struct fm801 { spinlock_t reg_lock; struct snd_info_entry *proc_entry; -#ifdef TEA575X_RADIO +#ifdef CONFIG_SND_FM801_RADIO struct snd_tea575x tea; #endif @@ -715,7 +714,7 @@ static int __devinit snd_fm801_pcm(struc * TEA5757 radio */ -#ifdef TEA575X_RADIO +#ifdef CONFIG_SND_FM801_RADIO /* GPIO to TEA575x maps */ struct snd_fm801_tea575x_gpio { @@ -1150,7 +1149,7 @@ static int snd_fm801_free(struct fm801 * outw(cmdw, FM801_REG(chip, IRQ_MASK)); __end_hw: -#ifdef TEA575X_RADIO +#ifdef CONFIG_SND_FM801_RADIO snd_tea575x_exit(&chip->tea); #endif if (chip->irq >= 0) @@ -1229,7 +1228,7 @@ static int __devinit snd_fm801_create(st snd_card_set_dev(card, &pci->dev); -#ifdef TEA575X_RADIO +#ifdef CONFIG_SND_FM801_RADIO chip->tea.private_data = chip; chip->tea.ops = &snd_fm801_tea_ops; sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci)); -- Ondrej Zary

2 3

[alsa-devel] Multistreaming Playback using Front Panel Headphone with realtek codec
by Raymond Yau 15 May '11

15 May '11

Request for testers to test the patch Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones or speakers. Hardware requirement 1) 10 channels realtek codec (e.g. alc892) which already work with model=auto 2) Headphone at front panel and Line out at rear panel "hw:0,0" is used for the rear panel audio jack "hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON Add an "Independent HP" switch to turn this feature on/off for desktop for those HDA codec Test: 1) speaker-test -c 8 -t wav -Dhw:0,0 2) speaker-test -c 2 -t wav -Dhw:0,2 It will need modification to support this feature for those desktop with 8 channels codec

3 13

[alsa-devel] [PATCH 1/3] tea575x: remove freq_fixup from struct
by Ondrej Zary 14 May '11

14 May '11

freq_fixup is a constant, no need to hold it in struct snd_tea575x and set in each driver. Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- linux-2.6.39-rc2-/include/sound/tea575x-tuner.h 2011-05-10 22:31:40.000000000 +0200 +++ linux-2.6.39-rc2/include/sound/tea575x-tuner.h 2011-05-12 21:00:50.000000000 +0200 @@ -26,6 +26,8 @@ #include <media/v4l2-dev.h> #include <media/v4l2-ioctl.h> +#define TEA575X_FMIF 10700 + #define TEA575X_DATA (1 << 0) #define TEA575X_CLK (1 << 1) #define TEA575X_WREN (1 << 2) @@ -46,7 +48,6 @@ struct snd_tea575x { bool mute; /* Device is muted? */ bool stereo; /* receiving stereo */ bool tuned; /* tuned to a station */ - unsigned int freq_fixup; /* crystal onboard */ unsigned int val; /* hw value */ unsigned long freq; /* frequency */ unsigned long in_use; /* set if the device is in use */ --- linux-2.6.39-rc2-/sound/i2c/other/tea575x-tuner.c 2011-05-10 22:31:40.000000000 +0200 +++ linux-2.6.39-rc2/sound/i2c/other/tea575x-tuner.c 2011-05-12 21:00:37.000000000 +0200 @@ -141,9 +141,9 @@ static void snd_tea575x_get_freq(struct freq /= 10; /* crystal fixup */ if (tea->tea5759) - freq += tea->freq_fixup; + freq += TEA575X_FMIF; else - freq -= tea->freq_fixup; + freq -= TEA575X_FMIF; tea->freq = freq * 16; /* from kHz */ } @@ -156,9 +156,9 @@ static void snd_tea575x_set_freq(struct freq /= 16; /* to kHz */ /* crystal fixup */ if (tea->tea5759) - freq -= tea->freq_fixup; + freq -= TEA575X_FMIF; else - freq += tea->freq_fixup; + freq += TEA575X_FMIF; /* freq /= 12.5 */ freq *= 10; freq /= 125; --- linux-2.6.39-rc2-/sound/pci/es1968.c 2011-05-10 22:31:43.000000000 +0200 +++ linux-2.6.39-rc2/sound/pci/es1968.c 2011-05-10 23:47:32.000000000 +0200 @@ -2794,7 +2794,6 @@ static int __devinit snd_es1968_create(s #ifdef CONFIG_SND_ES1968_RADIO chip->tea.card = card; - chip->tea.freq_fixup = 10700; chip->tea.private_data = chip; chip->tea.ops = &snd_es1968_tea_ops; if (!snd_tea575x_init(&chip->tea)) --- linux-2.6.39-rc2-/sound/pci/fm801.c 2011-05-10 23:24:39.000000000 +0200 +++ linux-2.6.39-rc2/sound/pci/fm801.c 2011-05-10 23:47:43.000000000 +0200 @@ -1231,7 +1231,6 @@ static int __devinit snd_fm801_create(st #ifdef TEA575X_RADIO chip->tea.card = card; - chip->tea.freq_fixup = 10700; chip->tea.private_data = chip; chip->tea.ops = &snd_fm801_tea_ops; if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 && -- Ondrej Zary

2 1

[alsa-devel] [PATCH v2] MFD: twl4030-codec: Update e-mail address
by Peter Ujfalusi 13 May '11

13 May '11

Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> --- Hello, Instead of keeping the old Nokia mail address, just change it to my new email address in the author line. drivers/mfd/twl4030-codec.c | 4 ++-- include/linux/mfd/twl4030-codec.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/twl4030-codec.c b/drivers/mfd/twl4030-codec.c index c02fded..534cc2e 100644 --- a/drivers/mfd/twl4030-codec.c +++ b/drivers/mfd/twl4030-codec.c @@ -1,7 +1,7 @@ /* * MFD driver for twl4030 codec submodule * - * Author: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> + * Author: Peter Ujfalusi <peter.ujfalusi(a)ti.com> * * Copyright: (C) 2009 Nokia Corporation * @@ -270,6 +270,6 @@ static void __devexit twl4030_codec_exit(void) } module_exit(twl4030_codec_exit); -MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi(a)nokia.com>"); +MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi(a)ti.com>"); MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/twl4030-codec.h b/include/linux/mfd/twl4030-codec.h index 2ec317c..5cc16bb 100644 --- a/include/linux/mfd/twl4030-codec.h +++ b/include/linux/mfd/twl4030-codec.h @@ -1,7 +1,7 @@ /* * MFD driver for twl4030 codec submodule * - * Author: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> + * Author: Peter Ujfalusi <peter.ujfalusi(a)ti.com> * * Copyright: (C) 2009 Nokia Corporation * -- 1.7.5.rc3

2 1