April 2011 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 1/5] ASoC: Make struct snd_soc_card's dapm_widgets and dapm_routes const
by Lars-Peter Clausen 13 Apr '11

13 Apr '11

Those should not be modified (and are not) by the core code, so make them const. This also makes them consistent with the same members of snd_soc_codec. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- include/sound/soc.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 435cb83..cb6b18b 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -755,9 +755,9 @@ struct snd_soc_card { /* * Card-specific routes and widgets. */ - struct snd_soc_dapm_widget *dapm_widgets; + const struct snd_soc_dapm_widget *dapm_widgets; int num_dapm_widgets; - struct snd_soc_dapm_route *dapm_routes; + const struct snd_soc_dapm_route *dapm_routes; int num_dapm_routes; struct work_struct deferred_resume_work; -- 1.7.2.5

3 10

[alsa-devel] CA0110 taints kernel
by Vedran Miletić 13 Apr '11

13 Apr '11

Hi, I experience frequent kernel crashes with 2.6.31 and CA0110. I know this card doesn't work, and there is no problem with that; however, it crashing non-stop is not very nice. Also, card doesn't get any controls (and I believe it does get some controls when it's the only card using HDA driver, that is when I disable onboard one). dmesg is here: http://pastebin.com/m7c53562f lspci: 02:00.0 PCI bridge: Creative Labs Device 7006 (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 Memory behind bridge: fe900000-fe9fffff Capabilities: [50] Power Management version 3 Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+ Capabilities: [80] Subsystem: Creative Labs Device 0010 Capabilities: [90] Express PCI/PCI-X Bridge, MSI 00 Capabilities: [100] Advanced Error Reporting Kernel modules: shpchp 03:00.0 Audio device: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG Subsystem: Creative Labs Device 0018 Flags: bus master, medium devsel, latency 64, IRQ 16 Memory at fe9fc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [dc] Power Management version 3 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel Any ideas? -- Vedran Miletić P.S. Please CC me, as I'm not subscribed to mailing list at the moment.

2 2

[alsa-devel] [PATCH 1/2] ASoC: codecs: JZ4740: Fix OOPS
by Lars-Peter Clausen 13 Apr '11

13 Apr '11

Commit ce6120cc(ASoC: Decouple DAPM from CODECs) changed the signature of snd_soc_dapm_widgets_new to take an pointer to a snd_soc_dapm_context instead of a snd_soc_codec. The call to snd_soc_dapm_widgets_new in jz4740_codec_dev_probe was not updated to reflect this change, which results in a compiletime warning and a runtime OOPS. Since the core code calls snd_soc_dapm_widgets_new after the codec has been registered it can be dropped here. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- sound/soc/codecs/jz4740.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c index f7cd346..f5ccdbf7 100644 --- a/sound/soc/codecs/jz4740.c +++ b/sound/soc/codecs/jz4740.c @@ -308,8 +308,6 @@ static int jz4740_codec_dev_probe(struct snd_soc_codec *codec) snd_soc_dapm_add_routes(dapm, jz4740_codec_dapm_routes, ARRAY_SIZE(jz4740_codec_dapm_routes)); - snd_soc_dapm_new_widgets(codec); - jz4740_codec_set_bias_level(codec, SND_SOC_BIAS_STANDBY); return 0; -- 1.7.2.5

3 3

[alsa-devel] [PATCH 1/8] ASoC: Initial audio support for Speyside on Cragganmore 6410
by Mark Brown 13 Apr '11

13 Apr '11

This is minimal code required to get audio out of the Speyside audio subsystem on the Wolfson Cragganmore 6410 reference platform. It sets up the link between the CPU and AIF1 of the WM8915 on the system, enabling audio playback via the headphone and speaker outputs of the device (which require no further configuration except runtime). It allows verification of basic functionality of the system. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/samsung/Kconfig | 6 ++ sound/soc/samsung/Makefile | 2 + sound/soc/samsung/speyside.c | 123 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 131 insertions(+), 0 deletions(-) create mode 100644 sound/soc/samsung/speyside.c diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index b8c7a2e..726af2e 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -170,3 +170,9 @@ config SND_SOC_SMDK_WM8580_PCM select SND_SAMSUNG_PCM help Say Y if you want to add support for SoC audio on the SMDK. + +config SND_SOC_SPEYSIDE + tristate "Audio support for Wolfson Speyside" + depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 + select SND_SAMSUNG_I2S + select SND_SOC_WM8915 diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile index 6c598fc..683843a 100644 --- a/sound/soc/samsung/Makefile +++ b/sound/soc/samsung/Makefile @@ -35,6 +35,7 @@ snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o snd-soc-goni-wm8994-objs := goni_wm8994.o snd-soc-smdk-spdif-objs := smdk_spdif.o snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o +snd-soc-speyside-objs := speyside.o obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o @@ -53,3 +54,4 @@ obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o +obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c new file mode 100644 index 0000000..f6dcee7b --- /dev/null +++ b/sound/soc/samsung/speyside.c @@ -0,0 +1,123 @@ +/* + * Speyside audio support + * + * Copyright 2011 Wolfson Microelectronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "../codecs/wm8915.h" + +static int speyside_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_pll(codec_dai, 0, WM8915_FLL_MCLK1, + 32768, 256 * 48000); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_FLL, + 256 * 48000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops speyside_ops = { + .hw_params = speyside_hw_params, +}; + +static struct snd_soc_dai_link speyside_dai[] = { + { + .name = "CPU", + .stream_name = "CPU", + .cpu_dai_name = "samsung-i2s.0", + .codec_dai_name = "wm8915-aif1", + .platform_name = "samsung-audio", + .codec_name = "wm8915.1-001a", + .ops = &speyside_ops, + }, +}; + +static struct snd_soc_card speyside = { + .name = "Speyside", + .dai_link = speyside_dai, + .num_links = ARRAY_SIZE(speyside_dai), +}; + +static __devinit int speyside_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &speyside; + int ret; + + card->dev = &pdev->dev; + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); + return ret; + } + + return 0; +} + +static int __devexit speyside_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + snd_soc_unregister_card(card); + + return 0; +} + +static struct platform_driver speyside_driver = { + .driver = { + .name = "speyside", + .owner = THIS_MODULE, + .pm = &snd_soc_pm_ops, + }, + .probe = speyside_probe, + .remove = __devexit_p(speyside_remove), +}; + +static int __init speyside_audio_init(void) +{ + return platform_driver_register(&speyside_driver); +} +module_init(speyside_audio_init); + +static void __exit speyside_audio_exit(void) +{ + platform_driver_unregister(&speyside_driver); +} +module_exit(speyside_audio_exit); + +MODULE_DESCRIPTION("Speyside audio support"); +MODULE_AUTHOR("Mark Brown <broonie(a)opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:speyside"); -- 1.7.4.1

3 9

[alsa-devel] [PATCH v2] ASoC: tlv320dac33: Lower the OSC calibration time
by Peter Ujfalusi 13 Apr '11

13 Apr '11

To get correct calibration, we can decrease the time needed for the OSC to calibrate itself. With this change we can save ~15ms in the OSC calibration phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)nokia.com> Acked-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- Hi, Changes: typo fix in the commit message. sound/soc/codecs/tlv320dac33.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index c109f6d..401a7ce 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -946,8 +946,8 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream) /* Write registers 0x08 and 0x09 (MSB, LSB) */ dac33_write16(codec, DAC33_INT_OSC_FREQ_RAT_A, oscset); - /* calib time: 128 is a nice number ;) */ - dac33_write(codec, DAC33_CALIB_TIME, 128); + /* OSC calibration time */ + dac33_write(codec, DAC33_CALIB_TIME, 96); /* adjustment treshold & step */ dac33_write(codec, DAC33_INT_OSC_CTRL_B, DAC33_ADJTHRSHLD(2) | -- 1.7.4.1

2 1

[alsa-devel] [PATCH] ASoC: Fix mis cherry-pick of wm1250-ev1 driver
by Mark Brown 13 Apr '11

13 Apr '11

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm1250-ev1.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm1250-ev1.c b/sound/soc/codecs/wm1250-ev1.c index 9cf699e..14d0716 100644 --- a/sound/soc/codecs/wm1250-ev1.c +++ b/sound/soc/codecs/wm1250-ev1.c @@ -73,7 +73,7 @@ static const struct i2c_device_id wm1250_ev1_i2c_id[] = { { "wm1250-ev1", 0 }, { } }; -MODULE_DEVICE_TABLE(i2c, wm1250_ev1__id); +MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id); static struct i2c_driver wm1250_ev1_i2c_driver = { .driver = { -- 1.7.4.1

2 1

[alsa-devel] [PATCH] ASoC: Move WM8915 FLL operations onto the CODEC
by Mark Brown 13 Apr '11

13 Apr '11

Since the WM8915 FLL is not tied to a particular audio interface move it to a CODEC wide operation. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8915.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c index 3adad28..0836094 100644 --- a/sound/soc/codecs/wm8915.c +++ b/sound/soc/codecs/wm8915.c @@ -1997,10 +1997,9 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, return 0; } -static int wm8915_set_fll(struct snd_soc_dai *dai, int fll_id, int source, +static int wm8915_set_fll(struct snd_soc_codec *codec, int fll_id, int source, unsigned int Fref, unsigned int Fout) { - struct snd_soc_codec *codec = dai->codec; struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); struct _fll_div fll_div; unsigned long timeout; @@ -2776,6 +2775,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8915 = { .num_dapm_widgets = ARRAY_SIZE(wm8915_dapm_widgets), .dapm_routes = wm8915_dapm_routes, .num_dapm_routes = ARRAY_SIZE(wm8915_dapm_routes), + .set_pll = wm8915_set_fll, }; #define WM8915_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ @@ -2788,7 +2788,6 @@ static struct snd_soc_dai_ops wm8915_dai_ops = { .set_fmt = wm8915_set_fmt, .hw_params = wm8915_hw_params, .set_sysclk = wm8915_set_sysclk, - .set_pll = wm8915_set_fll, }; static struct snd_soc_dai_driver wm8915_dai[] = { -- 1.7.4.1

2 1

[alsa-devel] [PATCH] ASoC: Create card DAPM widgets early so they can be used in callbacks
by Mark Brown 13 Apr '11

13 Apr '11

This helps with things like setting up the initial state. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/soc-core.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index f75f139..ef0689b 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1868,6 +1868,10 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card) INIT_WORK(&card->deferred_resume_work, soc_resume_deferred); #endif + if (card->dapm_widgets) + snd_soc_dapm_new_controls(&card->dapm, card->dapm_widgets, + card->num_dapm_widgets); + /* initialise the sound card only once */ if (card->probe) { ret = card->probe(card); @@ -1901,9 +1905,6 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card) card->controls, card->num_controls); - if (card->dapm_widgets) - snd_soc_dapm_new_controls(&card->dapm, card->dapm_widgets, - card->num_dapm_widgets); if (card->dapm_routes) snd_soc_dapm_add_routes(&card->dapm, card->dapm_routes, card->num_dapm_routes); -- 1.7.4.1

2 1

[alsa-devel] [PATCHv3] omap3: alsa-soc: Remove restrictive checks for cpu type
by Sanjeev Premi 13 Apr '11

13 Apr '11

Current checks for cpu type were too restrictive leading to failures for other silicons in same family. The problem was found while testing audio playback on AM37x and AM35x processors. But should exist on OMAP36xx as well. Signed-off-by: Sanjeev Premi <premi(a)ti.com> --- Changes in v3:: None. Reposting[1] after subscribing to alsa-devel list Changes in v2: 1) Added one more check to the changes. 2) Updated commit message to use plurals. [1] http://marc.info/?l=linux-omap&m=130026430110592&w=2 sound/soc/omap/omap-mcbsp.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 2175f09..a88a0bf 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -146,7 +146,7 @@ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream, * 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words) * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words) */ - if (cpu_is_omap343x() || cpu_is_omap44xx()) { + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { /* * Rule for the buffer size. We should not allow * smaller buffer than the FIFO size to avoid underruns @@ -258,7 +258,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, default: return -EINVAL; } - if (cpu_is_omap343x()) { + if (cpu_is_omap34xx()) { dma_data->set_threshold = omap_mcbsp_set_threshold; /* TODO: Currently, MODE_ELEMENT == MODE_FRAME */ if (omap_mcbsp_get_dma_op_mode(bus_id) == -- 1.7.2.2

2 1

[alsa-devel] [PATCH] ARM: Tegra: Seaboard board updates for audio
by Stephen Warren 12 Apr '11

12 Apr '11

* Initialize clock tree for audio * Add GPIO base definitions * Add audio GPIO definitions * Define platform data for WM8903 and ASoC machine driver * Add special case for Kaen to handle HP_MUTE GPIO * Register platform devices for audio * Update pinmux to cater for new GPIOs used for audio Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- This patch is for 2.6.40, and for the ARM/Tegra subsystem arch/arm/mach-tegra/board-seaboard-pinmux.c | 21 ++++++++++- arch/arm/mach-tegra/board-seaboard.c | 52 +++++++++++++++++++++++++++ arch/arm/mach-tegra/board-seaboard.h | 12 ++++-- 3 files changed, 79 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index 0bda495..e693246 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -49,7 +49,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, - {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -133,7 +133,7 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = { {TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, @@ -171,6 +171,23 @@ static struct tegra_gpio_table gpio_table[] = { void __init seaboard_pinmux_init(void) { + /* + * PINGROUP_SPIC contains two pins: + * + PX2, DISABLE_CHRGR (output) + * + PX3, WM8903 codec IRQ (input) + * + * The pinmux module can only configure TRISTATE vs. NORMAL on a + * per-group rather than per-pin basis. The group must be NORMAL + * since at least one pin is an output. However, we must ensure that + * the WM8903 IRQ is never driven, since the WM8903 itself is driving + * it, and we don't want multiple drivers. To ensure this, configure + * PX3 as a GPIO here, and set is as an input, before the pinmux table + * is written, which is when the pins will be un-tristated. + */ + tegra_gpio_enable(TEGRA_GPIO_CDC_IRQ); + gpio_request(TEGRA_GPIO_CDC_IRQ, "wm8903"); + gpio_direction_input(TEGRA_GPIO_CDC_IRQ); + tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux)); tegra_drive_pinmux_config_table(seaboard_drive_pinmux, diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index 783de17..2fdd376 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -26,9 +26,12 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <sound/wm8903.h> + #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> +#include <mach/tegra_wm8903_pdata.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -63,6 +66,10 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { /* name parent rate enabled */ { "uartb", "pll_p", 216000000, true}, { "uartd", "pll_p", 216000000, true}, + { "pll_a", "pll_p_out1", 56448000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "cdev1", NULL, 0, true }, + { "i2s1", "pll_a_out0", 11289600, false}, { NULL, NULL, 0, 0}, }; @@ -134,6 +141,22 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { .is_8bit = 1, }; +static struct tegra_wm8903_platform_data seaboard_audio_pdata = { + .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, + .gpio_hp_det = TEGRA_GPIO_HP_DET, + .gpio_hp_mute = -1, + .gpio_int_mic_en = -1, + .gpio_ext_mic_en = -1, +}; + +static struct platform_device seaboard_audio_device = { + .name = "tegra-snd-wm8903", + .id = 0, + .dev = { + .platform_data = &seaboard_audio_pdata, + }, +}; + static struct platform_device *seaboard_devices[] __initdata = { &debug_uart, &tegra_pmu_device, @@ -141,6 +164,10 @@ static struct platform_device *seaboard_devices[] __initdata = { &tegra_sdhci_device3, &tegra_sdhci_device1, &seaboard_gpio_keys_device, + &tegra_i2s_device1, + &tegra_das_device, + &tegra_pcm_device, + &seaboard_audio_device, }; static struct i2c_board_info __initdata isl29018_device = { @@ -152,6 +179,26 @@ static struct i2c_board_info __initdata adt7461_device = { I2C_BOARD_INFO("adt7461", 0x4c), }; +static struct wm8903_platform_data wm8903_pdata = { + .irq_active_low = 0, + .micdet_cfg = 0, + .micdet_delay = 100, + .gpio_base = SEABOARD_GPIO_WM8903(0), + .gpio_cfg = { + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + 0, + WM8903_GPIO_NO_CONFIG, + WM8903_GPIO_NO_CONFIG, + }, +}; + +static struct i2c_board_info __initdata wm8903_device = { + I2C_BOARD_INFO("wm8903", 0x1a), + .platform_data = &wm8903_pdata, + .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ), +}; + static void __init seaboard_i2c_init(void) { gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018"); @@ -161,6 +208,8 @@ static void __init seaboard_i2c_init(void) i2c_register_board_info(4, &adt7461_device, 1); + i2c_register_board_info(0, &wm8903_device, 1); + tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data; tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data; tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data; @@ -204,6 +253,9 @@ static void __init tegra_kaen_init(void) debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE; debug_uart_platform_data[0].irq = INT_UARTB; + seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE; + tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE); + seaboard_common_init(); seaboard_i2c_init(); diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h index d8415e1..04a1b2e 100644 --- a/arch/arm/mach-tegra/board-seaboard.h +++ b/arch/arm/mach-tegra/board-seaboard.h @@ -17,6 +17,9 @@ #ifndef _MACH_TEGRA_BOARD_SEABOARD_H #define _MACH_TEGRA_BOARD_SEABOARD_H +#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) +#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_)) + #define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 #define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 #define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6 @@ -31,10 +34,11 @@ #define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5 #define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2 #define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3 - -#define TPS_GPIO_BASE TEGRA_NR_GPIOS - -#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2) +#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS(2) +#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3 +#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2) +#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1 +#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5 void seaboard_pinmux_init(void); -- 1.7.1

1 1