December 2011 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] USB Quirks for Boss JS-8
by Keith A. Milner 15 Apr '13

15 Apr '13

Hi, I'm looking at developing a quirk for the Boss JS-8. The lsusb is as follows: Bus 001 Device 003: ID 0582:0109 Roland Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x0582 Roland Corp. idProduct 0x0109 bcdDevice 0.01 iManufacturer 1 BOSS iProduct 2 JS-8 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 167 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 06 24 f1 01 00 00 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 2 iInterface 0 ** UNRECOGNIZED: 07 24 01 01 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0070 1x 112 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 1 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 2 bInterfaceProtocol 1 iInterface 0 ** UNRECOGNIZED: 07 24 01 07 00 01 00 ** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 37 Transfer Type Isochronous Synch Type Asynchronous Usage Type Implicit feedback Data wMaxPacketSize 0x0070 1x 112 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 3 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 06 24 f1 02 02 02 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 3 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 8 Mass Storage bDeviceSubClass 6 SCSI bDeviceProtocol 80 Bulk (Zip) bMaxPacketSize0 64 bNumConfigurations 0 Device Status: 0x0001 Self Powered I wasn't entirely sure about the quirk syntax as the two interfaces are at EP 4 and EP5. Does this mean I need to ignore the (non-existant) lower interfaces? Here's what I came up with: { /* Boss JS-8 Jam Station */ USB_DEVICE(0x0582, 0x0109), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { /* .vendor_name = "BOSS", */ /* .product_name = "JS-8", */ .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_COMPOSITE, .data = (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 1, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 2, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 3, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 4, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 5, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = -1 } } } }, regards, -- Keith A. Milner

5 9

[alsa-devel] sound: usb-audio: full capture/playback/spdif support for Digidesign Mbox 2
by Damien Zammit 23 Dec '12

23 Dec '12

Hi folks, I have put together full support for Digidesign Mbox 2, but it needs someone to help me merge it into alsa. I haven't seen the latest snd-usb-audio code since last year, it seems to have branched into multiple files. I have worked out how the Digidesign Mbox 2 needs to be configured, it supports SPDIF i/o simultaneously with analogue but can be toggled on and off by using different altsettings. Also the sample clock rate must be configured via a special method. Therefore I have provided for this in a device_setup parameter with 4 settings: 48Khz Spdif+analog = 0 44.1Khz Spdif+analog = 1 48Khz Analog only = 2 44.1Khz Analog only = 3 ###### audio /* Digidesign Mbox 2 workaround: * supports S24_3BE BIG ENDIAN in an unusual way */ if (chip->usb_id == USB_ID(0x0dba, 0x3000)) pcm_format = SNDRV_PCM_FORMAT_S24_3BE; static int mbox2_skip_setting_quirk(struct snd_usb_audio *chip, int iface, int altno); static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) { ..... ..... /* Digidesign Mbox 2: skip altsets incompatible with device_setup */ if (chip->usb_id == USB_ID(0x0dba, 0x3000) && mbox2_skip_setting_quirk(chip, iface_no, altno)) continue; ..... } #define MBOX2_SET_48K_SPDIF 0 #define MBOX2_SET_44K_SPDIF 1 #define MBOX2_SET_48K_ANALOG 2 #define MBOX2_SET_44K_ANALOG 3 static int mbox2_skip_setting_quirk(struct snd_usb_audio *chip, int iface, int altno) { u8 srate[3]; /* Reset ifaces 2-5 to 0 altsetting. */ usb_set_interface(chip->dev, iface, 0); if (device_setup[chip->index] == MBOX2_SET_48K_SPDIF || device_setup[chip->index] == MBOX2_SET_48K_ANALOG) { //setup 48k srate[0]=0x80; srate[1]=0xbb; srate[2]=0x00; /* Send the magic! */ snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x01, 0x22, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003, 1000); snd_printk(KERN_INFO "Digidesign Mbox 2: 24 Bit 48000Hz"); if (device_setup[chip->index] == MBOX2_SET_48K_SPDIF) { //setup spdif snd_printk(KERN_INFO ", SPDIF\n"); if (altno != 2) return 1; } else { //setup analog snd_printk(KERN_INFO ", ANALOGUE\n"); if (altno != 3) return 1; } } else { //setup 44k srate[0]=0x44; srate[1]=0xac; srate[2]=0x00; /* Send the magic! */ snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x01, 0x22, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003, 1000); snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003, 1000); snd_printk(KERN_INFO "Digidesign Mbox 2: 24 Bit 44100Hz"); if (device_setup[chip->index] == MBOX2_SET_44K_SPDIF || device_setup[chip->index] == MBOX2_SET_44K_ANALOG) { //setup spdif snd_printk(KERN_INFO ", SPDIF\n"); if (altno != 2) return 1; } else { //setup analog snd_printk(KERN_INFO ", ANALOGUE\n"); if (altno != 3) return 1; } } return 0; } #define MBOX2_FIRMWARE_SIZE 646 #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */ #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) { struct usb_host_config *config = dev->actconfig; int err; u8 enablemagic[3]; u8 bootresponse; int fwsize; if ((fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength)) == MBOX2_FIRMWARE_SIZE) { snd_printdd("Sending Digidesign Mbox 2 boot sequence...\n"); /* From USB Snoop, * * SetupPacket = RT RQ VHVL INDX SIZE * RT = 0xRT Request Type * RQ = 0xRQ Request * VHVL = 0xVLVH Value in reverse byte order * INDX = 0xDXIN Index in reverse byte order * SIZE = 0xZESI Size in reverse byte order * * Magic boot code setup packet: c0 85 01 00 00 00 12 00 * RQ RT VLVH DXIN ZESI * becomes 0x85, 0xc0, 0x0001, 0x0000, &RETURNDATA, 0x0012, TIMEOUT * for snd_usb_ctl_msg() */ mbox2_reboot: snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012, 1000); if (bootresponse == MBOX2_BOOT_LOADING) { snd_printdd("device not ready, resending boot sequence...\n"); goto mbox2_reboot; } if (bootresponse == MBOX2_BOOT_READY) { snd_printdd("device initialised!\n"); err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, sizeof(dev->descriptor)); config = dev->actconfig; if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err); err = usb_reset_configuration(dev); if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err); snd_printdd("mbox2_boot: new boot length = %d\n", le16_to_cpu(get_cfg_desc(config)->wTotalLength)); /* Successful boot, (should reset all altsettings to 0 like windows does, but works without it) * but now we will try sending capture/playback enable magic * * 80 bb 00 = 24bit mode - S24_3BE * 44 ac 00 = 16bit mode? * */ /* We want 48khz mode for now */ enablemagic[0]=0x80; enablemagic[1]=0xbb; enablemagic[2]=0x00; /* Send the magic! */ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x01, 0x22, 0x0100, 0x0085, &enablemagic, 0x0003, 1000); snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x81, 0xa2, 0x0100, 0x0085, &enablemagic, 0x0003, 1000); snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x81, 0xa2, 0x0100, 0x0086, &enablemagic, 0x0003, 1000); snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x81, 0xa2, 0x0100, 0x0003, &enablemagic, 0x0003, 1000); return 0; /* Succesful boot */ } snd_printdd("unknown bootresponse, ignoring device: %d\n",bootresponse); return -ENODEV; } snd_printk("Invalid firmware size: %d\n",fwsize); return -ENODEV; } ####### quirk: { USB_DEVICE(0x0dba, 0x3000), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { .vendor_name = "Digidesign", .product_name = "Mbox 2", .ifnum = QUIRK_ANY_INTERFACE, .type = QUIRK_COMPOSITE, .data = (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, .type = QUIRK_IGNORE_INTERFACE }, { .ifnum = 1, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 2, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 3, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 4, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 5, .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { .ifnum = 6, .type = QUIRK_MIDI_MBOX2, .data = & (const struct snd_usb_midi_endpoint_info) { .out_ep = 0x02, .out_cables = 0x0001, .in_ep = 0x81, .in_interval = 0x01, .in_cables = 0x0001 } }, { .ifnum = -1 } } } }, ##### midi case QUIRK_MIDI_MBOX2: /* Digidesign Mbox 2 uses MIDIMAN MIDI protocol */ umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops; /* * We have to make sure that the USB core looks * again at interface 6 by calling usb_set_interface() on it. */ usb_set_interface(umidi->chip->dev, 6, 0); memcpy(&endpoints[0], quirk->data, sizeof(struct snd_usb_midi_endpoint_info)); err = 0; break; Damien

4 26

[alsa-devel] Status of Zoom R16
by Evan Ta 08 Nov '12

08 Nov '12

Hi, as subj says: can you tell me how the Zoom R16 is doing? The hardware looks nice, but the latest info I can find is a seemingly unresolved failure to work with Alsa as of feb 2010. Thanks, Evan

4 6

[alsa-devel] HDSPM - Problems with SyncIn
by Andre Schramm 19 Oct '12

19 Oct '12

Hello, I did some tests with the SyncIn-Feature of the HDSPe cards. [root@localhost ~]# lspci |grep Mult 01:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP MADI (rev d2) 02:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP MADI (rev d2) The SyncOut of card 2:00 was plugged to the SyncIn of 1:00 and 1:00 was put to AutoSync-mode automatically upon boot. Problem is that the amixer output seems to be inconsistent and differs from the proc output as well, so I'm not sure which one to trust. [root@localhost ~]# amixer -c0 contents numid=5,iface=MIXER,name='AutoSync Reference' ; type=ENUMERATED,access=r-------,values=1,items=5 ; Item #0 'Word Clock' ; Item #1 'MADI' ; Item #2 'TCO' ; Item #3 'Sync In' ; Item #4 'None' : values=3 numid=2,iface=MIXER,name='Internal Clock' ; type=ENUMERATED,access=rw------,values=1,items=9 ; Item #0 '32 kHz' ; Item #1 '44.1 kHz' ; Item #2 '48 kHz' ; Item #3 '64 kHz' ; Item #4 '88.2 kHz' ; Item #5 '96 kHz' ; Item #6 '128 kHz' ; Item #7 '176.4 kHz' ; Item #8 '192 kHz' : values=2 numid=4,iface=MIXER,name='Preferred Sync Reference' ; type=ENUMERATED,access=rw------,values=1,items=3 ; Item #0 'Word Clock' ; Item #1 'MADI' ; Item #2 'Sync In' : values=2 numid=10,iface=MIXER,name='SYNC IN SyncCheck' ; type=ENUMERATED,access=r-------,values=1,items=4 ; Item #0 'No Lock' ; Item #1 'Lock' ; Item #2 'Sync' ; Item #3 'N/A' : values=0 numid=3,iface=MIXER,name='System Clock Mode' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Master' ; Item #1 'AutoSync' : values=1 numid=6,iface=MIXER,name='System Sample Rate' ; type=INTEGER,access=r-------,values=1,min=27000,max=207000,step=1 : values=47999 'Preferred Sync Reference' is SyncIn, 'SYNC IN SyncCheck' says 'No Lock', meaning no signal at all, but the 'System Sample Rate' coming from the master card is detected with 1Hz offset. When putting the master to 32000Hz, 31999Hz are shown and so on. [root@localhost ~]# cat /proc/asound/card0/hdspm RME MADI (Card #1) Rev.d2 Status2first3bits: 1 HW Serial: 0x0000019196d4 IRQ: 16 Registers bus: 0xfe9f0000 VM: 0xf8920000 --- System --- IRQ Pending: Audio=0, MIDI0=0, MIDI1=0, IRQcount=0 HW pointer: id = 0, rawptr = 0 (0->16320) estimated= 0 (bytes) MIDI FIFO: Out1=0x0, Out2=0x0, In1=0x0, In2=0x0 MIDIoverMADI FIFO: In=0x0, Out=0x0 Register: ctrl1=0x10344ca, ctrl2=0x0, status1=0xc30004, status2=0xc0020361 No TCO module detected. --- Settings --- Size (Latency): 2048 samples (2 periods of 8192 bytes) Line out: on ClearTrackMarker = off, Transmit in 64 Channel Mode, Auto Input off AutoSync Reference: AutoSync Preferred Sync Reference: TCO System Clock Frequency: 48000 --- Status: Inputs MADI=NoLock, WordClock=NoLock AutoSync: Reference= Sync In, Freq=0 (MADI = 3, Word = 3) Input: Coax, Mode=56 channels Now the proc-output reports 'No TCO module detected', which is correct, as no expansion modules where plugged to the cards. But it also says 'Preferred Sync Reference: TCO' and 'Freq=0', where amixer said SyncIn and 47999? Output of the master card is below. Regards, Andre [root@localhost ~]# amixer -c1 contents numid=5,iface=MIXER,name='AutoSync Reference' ; type=ENUMERATED,access=r-------,values=1,items=5 ; Item #0 'Word Clock' ; Item #1 'MADI' ; Item #2 'TCO' ; Item #3 'Sync In' ; Item #4 'None' : values=4 numid=15,iface=MIXER,name='Input Select' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'optical' ; Item #1 'coaxial' : values=0 numid=2,iface=MIXER,name='Internal Clock' ; type=ENUMERATED,access=rw------,values=1,items=9 ; Item #0 '32 kHz' ; Item #1 '44.1 kHz' ; Item #2 '48 kHz' ; Item #3 '64 kHz' ; Item #4 '88.2 kHz' ; Item #5 '96 kHz' ; Item #6 '128 kHz' ; Item #7 '176.4 kHz' ; Item #8 '192 kHz' : values=2 numid=4,iface=MIXER,name='Preferred Sync Reference' ; type=ENUMERATED,access=rw------,values=1,items=3 ; Item #0 'Word Clock' ; Item #1 'MADI' ; Item #2 'Sync In' : values=0 numid=10,iface=MIXER,name='SYNC IN SyncCheck' ; type=ENUMERATED,access=r-------,values=1,items=4 ; Item #0 'No Lock' ; Item #1 'Lock' ; Item #2 'Sync' ; Item #3 'N/A' : values=0 numid=3,iface=MIXER,name='System Clock Mode' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Master' ; Item #1 'AutoSync' : values=0 numid=6,iface=MIXER,name='System Sample Rate' ; type=INTEGER,access=r-------,values=1,min=27000,max=207000,step=1 : values=48000 [root@localhost ~]# cat /proc/asound/card1/hdspm RME MADI (Card #2) Rev.d2 Status2first3bits: 1 HW Serial: 0x000001b1c606 IRQ: 17 Registers bus: 0xfeaf0000 VM: 0xf9280000 --- System --- IRQ Pending: Audio=0, MIDI0=0, MIDI1=0, IRQcount=0 HW pointer: id = 0, rawptr = 0 (0->16320) estimated= 0 (bytes) MIDI FIFO: Out1=0x0, Out2=0x0, In1=0x0, In2=0x0 MIDIoverMADI FIFO: In=0x0, Out=0x0 Register: ctrl1=0x10004da, ctrl2=0x0, status1=0x2800000, status2=0xc0020701 No TCO module detected. --- Settings --- Size (Latency): 2048 samples (2 periods of 8192 bytes) Line out: on ClearTrackMarker = off, Transmit in 64 Channel Mode, Auto Input off AutoSync Reference: Master Preferred Sync Reference: Word Clock System Clock Frequency: 48000 --- Status: Inputs MADI=NoLock, WordClock=NoLock AutoSync: Reference= Input not valid, Freq=0 (MADI = 10, Word = 0) Input: Optical, Mode=56 channels

2 2

Re: [alsa-devel] [PATCH 2.6.39-rc3] hda_intel: ALSA HD Audio patch for Intel Panther Point DeviceIDs
by Takashi Iwai 09 Oct '12

09 Oct '12

At Wed, 20 Apr 2011 10:59:57 -0700, Seth Heasley wrote: > > This patch adds the HD Audio Controller DeviceIDs for the Intel Panther Point PCH. > > Signed-off-by: Seth Heasley <seth.heasley(a)intel.com> Applied now. Thanks. Takashi > --- > --- linux-2.6.39-rc3/sound/pci/hda/hda_intel.c.orig 2011-04-11 17:21:51.000000000 -0700 > +++ linux-2.6.39-rc3/sound/pci/hda/hda_intel.c 2011-04-14 11:44:40.000000000 -0700 > @@ -126,6 +126,7 @@ > "{Intel, ICH10}," > "{Intel, PCH}," > "{Intel, CPT}," > + "{Intel, PPT}," > "{Intel, PBG}," > "{Intel, SCH}," > "{ATI, SB450}," > @@ -2759,6 +2760,8 @@ > { PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH }, > /* PBG */ > { PCI_DEVICE(0x8086, 0x1d20), .driver_data = AZX_DRIVER_PCH }, > + /* Panther Point */ > + { PCI_DEVICE(0x8086, 0x1e20), .driver_data = AZX_DRIVER_PCH }, > /* SCH */ > { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH }, > /* Generic Intel */ >

3 2

[alsa-devel] [PATCH] snd-usb-us122l: Fix missing NULL checks
by Karsten Wiese 27 Apr '12

27 Apr '12

Fix missing NULL checks in usb_stream_hwdep_poll() and usb_stream_hwdep_ioctl(). Wake up poll waiters before returning from usb_stream_hwdep_ioctl(). Signed-off-by: Karsten Wiese <fzu(a)wemgehoertderstaat.de> Cc: stable(a)kernel.org --- sound/usb/usx2y/us122l.c | 41 ++++++++++++++++++++--------------------- 1 files changed, 20 insertions(+), 21 deletions(-) diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 91bb296..7abda8d 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -269,29 +269,26 @@ static unsigned int usb_stream_hwdep_poll(struct snd_hwdep *hw, struct file *file, poll_table *wait) { struct us122l *us122l = hw->private_data; - struct usb_stream *s = us122l->sk.s; unsigned *polled; unsigned int mask; poll_wait(file, &us122l->sk.sleep, wait); - switch (s->state) { - case usb_stream_ready: - if (us122l->first == file) - polled = &s->periods_polled; - else - polled = &us122l->second_periods_polled; - if (*polled != s->periods_done) { - *polled = s->periods_done; - mask = POLLIN | POLLOUT | POLLWRNORM; - break; + mask = POLLIN | POLLOUT | POLLWRNORM | POLLERR; + if (mutex_trylock(&us122l->mutex)) { + struct usb_stream *s = us122l->sk.s; + if (s && s->state == usb_stream_ready) { + if (us122l->first == file) + polled = &s->periods_polled; + else + polled = &us122l->second_periods_polled; + if (*polled != s->periods_done) { + *polled = s->periods_done; + mask = POLLIN | POLLOUT | POLLWRNORM; + } else + mask = 0; } - /* Fall through */ - mask = 0; - break; - default: - mask = POLLIN | POLLOUT | POLLWRNORM | POLLERR; - break; + mutex_unlock(&us122l->mutex); } return mask; } @@ -377,6 +374,7 @@ static int usb_stream_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, { struct usb_stream_config *cfg; struct us122l *us122l = hw->private_data; + struct usb_stream *s; unsigned min_period_frames; int err = 0; bool high_speed; @@ -422,18 +420,18 @@ static int usb_stream_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, snd_power_wait(hw->card, SNDRV_CTL_POWER_D0); mutex_lock(&us122l->mutex); + s = us122l->sk.s; if (!us122l->master) us122l->master = file; else if (us122l->master != file) { - if (memcmp(cfg, &us122l->sk.s->cfg, sizeof(*cfg))) { + if (!s || memcmp(cfg, &s->cfg, sizeof(*cfg))) { err = -EIO; goto unlock; } us122l->slave = file; } - if (!us122l->sk.s || - memcmp(cfg, &us122l->sk.s->cfg, sizeof(*cfg)) || - us122l->sk.s->state == usb_stream_xrun) { + if (!s || memcmp(cfg, &s->cfg, sizeof(*cfg)) || + s->state == usb_stream_xrun) { us122l_stop(us122l); if (!us122l_start(us122l, cfg->sample_rate, cfg->period_frames)) err = -EIO; @@ -444,6 +442,7 @@ unlock: mutex_unlock(&us122l->mutex); free: kfree(cfg); + wake_up_all(&us122l->sk.sleep); return err; } -- 1.7.2.3

2 5

Re: [alsa-devel] Port C Out selector , Port E Out selector of ad1988 and ad1988_3stack_dac_nids
by Raymond Yau 10 Mar '12

10 Mar '12

2011/9/16 Takashi Iwai <tiwai(a)suse.de>: > At Fri, 16 Sep 2011 11:59:54 +0800, > Raymond Yau wrote: >> >> 2011/9/12 Takashi Iwai <tiwai(a)suse.de>: >> > At Wed, 31 Aug 2011 11:21:00 +0800, >> > Raymond Yau wrote: >> >> >> >> HDA - Add Headphone Playback Volume control for ad1988/ad1989 >> >> >> >> - use DAC0 instead of DAC1 for Port-A Headphone >> >> - assign 0x03 to spec->multiout.hp_nid except model="6stack-dig-fp" >> > >> > Thanks, applied now. >> > >> > >> > Takashi >> > >> >> while testing the headphone volume control , >> >> I discover that the "Port C Out selector" and "Port E Out Selector" >> (i.e. node 0x31 and 0x32 ) by commit in patch_anlog.c >> >> fd66e0d0591dd12eb0bea1e9f3aa194bb93cebbd >> >> >> >> * AD1988 >> * >> * Output pins and routes >> * >> * Pin Mix Sel DAC >> * port-A 0x11 (mute/hp) <- 0x22 <- 0x37 <- 03/04/06 >> * port-B 0x14 (mute/hp) <- 0x2b <- 0x30 <- 03/04/06 >> * port-C 0x15 (mute) <- 0x2c <- 0x31 <- 05/0a >> * port-D 0x12 (mute/hp) <- 0x29 <- 04 >> * port-E 0x17 (mute/hp) <- 0x26 <- 0x32 <- 05/0a >> >> >> >> The connection list of node 0x31 and 0x32 are different from datasheet >> >> >> Table 10. Audio Widget >> >> 31 Audio selector Selects DAC_2 and DAC_4 for PORT-C >> PORT-E Out Selector >> 32 Audio selector Selects DAC_2 and DAC_4 for PORT-E >> PORT-C In Selector >> >> >> >> Codec: Analog Devices AD1988 >> Address: 0 >> AFG Function Id: 0x1 (unsol 0) >> Vendor Id: 0x11d41988 >> Subsystem Id: 0x104381e1 >> Revision Id: 0x100400 >> >> >> Node 0x31 [Audio Selector] wcaps 0x300101: Stereo >> Connection: 2 >> 0x04* 0x0a >> Node 0x32 [Audio Selector] wcaps 0x300101: Stereo >> Connection: 2 >> 0x05* 0x04 >> >> >> >> is the following patch based on real hardware ? >> >> >> commit 8c7c7b8dd2828b42c1230c6b0235e7d1dcf57e5 >> >> hda-codec - Fix surrounds on 3stack mode of AD1988 > > I don't see this commit id in my tree... > > > Takashi > http://git.alsa-project.org/?p=alsa-kernel.git;a=commit;h=fd66e0d0591dd12eb… Thu, 17 Nov 2005 14:31:34 +0000 (15:31 +0100) Add AD1988 codec support to hda-codec driver. http://git.alsa-project.org/?p=alsa-kernel.git;a=commitdiff;h=f8c7c7b8dd282… Thu, 24 Nov 2005 15:17:20 +0000 (16:17 +0100)] Fixed the swapped surround/CLFE on 3stack mode of AD1988. hda-emu codecs/ad1988a -m "3stack" route -a 0x15 Out[0a] -x Sel[31] -- Mix[2c] -> Pin[15] Out[04] -> Sel[31] -- Mix[2c] -> Pin[15] route -a 0x17 Out[04] -> Sel[32] -- Mix[26] -> Pin[17] Out[05] -x Sel[32] -- Mix[26] -> Pin[17]

2 4

[alsa-devel] ALC892, Clevo P150HM: Input Source gets reset to "Mic" every resume
by Julian Sikorski 02 Mar '12

02 Mar '12

Hi, whenever I resume the machine, the Input Source would get changed back from "Internal Mic" to "Mic". This is a bit annoying, because pulseaudio is unaware of that change. As a result, everything looks fine in pavucontrol but no sound gets recorded. A quick look at alsamixer -c0 revealed the problem. My alsa info: http://www.alsa-project.org/db/?f=c5776b615a5f3b9ae624e4250fb0c2b69118ce26 This is unrelated to the other problems I have been reporting, since this happens on a mostly-stock Fedora 3.1.2 kernel (the patch I added deals with xhci, not alsa). Regards, Julian

3 8

[alsa-devel] [PATCH 1/2] ASoC: Convert kirkwood-t5325 to use snd_soc_register_card()
by Axel Lin 07 Feb '12

07 Feb '12

Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin(a)gmail.com> --- I don't have this hardware, I'd appreciate if someone can test this patch. Axel arch/arm/mach-kirkwood/t5325-setup.c | 6 ++++ sound/soc/kirkwood/kirkwood-t5325.c | 47 +++++++++++++++++---------------- 2 files changed, 30 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index 966b2b3..f9d2a11 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -106,6 +106,11 @@ static struct platform_device hp_t5325_button_device = { } }; +static struct platform_device hp_t5325_audio_device = { + .name = "t5325-audio", + .id = -1, +}; + static unsigned int hp_t5325_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_SPI_MOSI, @@ -179,6 +184,7 @@ static void __init hp_t5325_init(void) kirkwood_sata_init(&hp_t5325_sata_data); kirkwood_ehci_init(); platform_device_register(&hp_t5325_button_device); + platform_device_register(&hp_t5325_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); diff --git a/sound/soc/kirkwood/kirkwood-t5325.c b/sound/soc/kirkwood/kirkwood-t5325.c index 16b83e5..ce4f408 100644 --- a/sound/soc/kirkwood/kirkwood-t5325.c +++ b/sound/soc/kirkwood/kirkwood-t5325.c @@ -80,7 +80,6 @@ static struct snd_soc_dai_link t5325_dai[] = { }, }; - static struct snd_soc_card t5325 = { .name = "t5325", .owner = THIS_MODULE, @@ -93,38 +92,40 @@ static struct snd_soc_card t5325 = { .num_dapm_routes = ARRAY_SIZE(t5325_route), }; -static struct platform_device *t5325_snd_device; - -static int __init t5325_init(void) +static int __devinit t5325_probe(struct platform_device *pdev) { + struct snd_soc_card *card = &t5325; int ret; - if (!machine_is_t5325()) - return 0; - - t5325_snd_device = platform_device_alloc("soc-audio", -1); - if (!t5325_snd_device) - return -ENOMEM; - - platform_set_drvdata(t5325_snd_device, - &t5325); - - ret = platform_device_add(t5325_snd_device); - if (ret) { - printk(KERN_ERR "%s: platform_device_add failed\n", __func__); - platform_device_put(t5325_snd_device); - } + card->dev = &pdev->dev; + ret = snd_soc_register_card(card); + if (ret) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); return ret; } -module_init(t5325_init); -static void __exit t5325_exit(void) +static int __devexit t5325_remove(struct platform_device *pdev) { - platform_device_unregister(t5325_snd_device); + struct snd_soc_card *card = platform_get_drvdata(pdev); + + snd_soc_unregister_card(card); + return 0; } -module_exit(t5325_exit); + +static struct platform_driver t5325_driver = { + .driver = { + .name = "t5325-audio", + .owner = THIS_MODULE, + }, + .probe = t5325_probe, + .remove = __devexit_p(t5325_remove), +}; + +module_platform_driver(t5325_driver); MODULE_AUTHOR("Arnaud Patard <arnaud.patard(a)rtp-net.org>"); MODULE_DESCRIPTION("ALSA SoC t5325 audio client"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:t5325-audio"); -- 1.7.5.4

2 2

[alsa-devel] [PATCH] ALSA: HDA: Remove unconnected PCM devices for Intel HDMI
by David Henningsson 01 Feb '12

01 Feb '12

Since I'm a little new in HDMI land and the patch is non-trivial, I wouldn't mind some comments on this one. Also thanks to Jaroslav who cleared a few things out about the logical and physical devices which helped me figure out what I should do about it :-) Anyway, here's the patch. Some newer chips have more than one HDMI output, but usually not all of them are exposed as physical jacks. Removing the unused PCM devices (as indicated by BIOS in the pin config default) will reduce user confusion as they currently have to choose between several HDMI devices, some of them not working anyway. Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

4 14