November 2011 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] ASoC updates for 3.2
by Mark Brown 02 Nov '11

02 Nov '11

The following changes since commit 5927f94700e860ae27ff24e7f3bc9e4f7b9922eb: ASoC: wm8940: Properly set codec->dapm.bias_level (2011-10-27 09:17:08 +0200) are available in the git repository at: git://opensource.wolfsonmicro.com/linux-2.6-asoc.git for-3.2 The usual connection of small, local fixes to specific drivers. Axel Lin (5): ASoC: wm8940: Fix mask for setting BCLKDIV ASoC: tlv320aic23: Clear TLV320AIC23_MS_MASTER bit for slave mode ASoC: tlv320aic3x: Clear BIT_CLK_MASTER and WORD_CLK_MASTER bits for for slave mode ASoC: wm8711: Fix wrong mask for setting input audio data bit length select ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmt Hong Xu (1): ASoC: WM8904: Set `invert' bit for Capture Switch Mark Brown (4): ASoC: Fix return value of wm5100_gpio_direction_out() ASoC: Ensure WM8962 PLL registers are reset ASoC: Ensure the WM8962 oscillator and PLLs start up disabled ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLK sound/soc/codecs/tlv320aic23.c | 1 + sound/soc/codecs/tlv320aic3x.c | 1 + sound/soc/codecs/wm5100.c | 12 ++++++++---- sound/soc/codecs/wm8711.c | 4 ++-- sound/soc/codecs/wm8904.c | 2 +- sound/soc/codecs/wm8940.c | 2 +- sound/soc/codecs/wm8962.c | 30 ++++++++++++++++++++---------- 7 files changed, 34 insertions(+), 18 deletions(-)

2 3

[alsa-devel] Where to find a guideline for ALSA mixer and control interface?
by Lin, Mengdong 02 Nov '11

02 Nov '11

Could someone tell me where to find a guideline on how to use ALSA mixer & control API? Is reading the source code of amixer my only choice? But I want to have a big picture about these API at first. Many thanks! I found there are many online documents about PCM interface but few about mixer or control interface :( Thanks & Best Regards Mengdong

1 0

[alsa-devel] How to understand capabilities of a mixer control output by "amixer"?
by Lin, Mengdong 02 Nov '11

02 Nov '11

I'm new to ALSA. Could anybody help explain the capabilities values of an ALSA mixer control? - What's the difference between pvolume and pvolume-joined? Only 'Master' control has pvolume-joined, but I cannot see any GUI difference between 'Master' and 'Headerphone' by alsamixer. - What does the penum and cenum mean? What are they designed for? I think "p" means playback and "c" means capture. But it's confusing to see control 'Capture' also has a capability "penum"? Here is output of amixer on my destop: Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 64 Mono: Playback 51 [80%] [-13.00dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 60 [94%] [-4.00dB] [on] Front Right: Playback 60 [94%] [-4.00dB] [on] .... Simple mixer control 'Capture',0 Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-13.50dB] [on] Front Right: Capture 0 [0%] [-13.50dB] [on] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 9 [29%] [0.00dB] [off] Front Right: Capture 9 [29%] [0.00dB] [off] Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Mic' 'Line' Item0: 'Line' Simple mixer control 'Input Source',1 Capabilities: cenum Items: 'Mic' 'Line' Item0: 'Line' Thanks & Best Regards Mengdong

1 0

[alsa-devel] [PATCH 1/3] ASoC: Convert WM8996 to direct regmap API usage
by Mark Brown 01 Nov '11

01 Nov '11

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8996.c | 699 +++++++++++++++++++++++++-------------------- 1 files changed, 391 insertions(+), 308 deletions(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 645c980..2cea205 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -19,6 +19,7 @@ #include <linux/gcd.h> #include <linux/gpio.h> #include <linux/i2c.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h> @@ -114,297 +115,365 @@ WM8996_REGULATOR_EVENT(0) WM8996_REGULATOR_EVENT(1) WM8996_REGULATOR_EVENT(2) -static const u16 wm8996_reg[WM8996_MAX_REGISTER] = { - [WM8996_SOFTWARE_RESET] = 0x8996, - [WM8996_POWER_MANAGEMENT_7] = 0x10, - [WM8996_DAC1_HPOUT1_VOLUME] = 0x88, - [WM8996_DAC2_HPOUT2_VOLUME] = 0x88, - [WM8996_DAC1_LEFT_VOLUME] = 0x2c0, - [WM8996_DAC1_RIGHT_VOLUME] = 0x2c0, - [WM8996_DAC2_LEFT_VOLUME] = 0x2c0, - [WM8996_DAC2_RIGHT_VOLUME] = 0x2c0, - [WM8996_OUTPUT1_LEFT_VOLUME] = 0x80, - [WM8996_OUTPUT1_RIGHT_VOLUME] = 0x80, - [WM8996_OUTPUT2_LEFT_VOLUME] = 0x80, - [WM8996_OUTPUT2_RIGHT_VOLUME] = 0x80, - [WM8996_MICBIAS_1] = 0x39, - [WM8996_MICBIAS_2] = 0x39, - [WM8996_LDO_1] = 0x3, - [WM8996_LDO_2] = 0x13, - [WM8996_ACCESSORY_DETECT_MODE_1] = 0x4, - [WM8996_HEADPHONE_DETECT_1] = 0x20, - [WM8996_MIC_DETECT_1] = 0x7600, - [WM8996_MIC_DETECT_2] = 0xbf, - [WM8996_CHARGE_PUMP_1] = 0x1f25, - [WM8996_CHARGE_PUMP_2] = 0xab19, - [WM8996_DC_SERVO_5] = 0x2a2a, - [WM8996_CONTROL_INTERFACE_1] = 0x8004, - [WM8996_CLOCKING_1] = 0x10, - [WM8996_AIF_RATE] = 0x83, - [WM8996_FLL_CONTROL_4] = 0x5dc0, - [WM8996_FLL_CONTROL_5] = 0xc84, - [WM8996_FLL_EFS_2] = 0x2, - [WM8996_AIF1_TX_LRCLK_1] = 0x80, - [WM8996_AIF1_TX_LRCLK_2] = 0x8, - [WM8996_AIF1_RX_LRCLK_1] = 0x80, - [WM8996_AIF1TX_DATA_CONFIGURATION_1] = 0x1818, - [WM8996_AIF1RX_DATA_CONFIGURATION] = 0x1818, - [WM8996_AIF1TX_TEST] = 0x7, - [WM8996_AIF2_TX_LRCLK_1] = 0x80, - [WM8996_AIF2_TX_LRCLK_2] = 0x8, - [WM8996_AIF2_RX_LRCLK_1] = 0x80, - [WM8996_AIF2TX_DATA_CONFIGURATION_1] = 0x1818, - [WM8996_AIF2RX_DATA_CONFIGURATION] = 0x1818, - [WM8996_AIF2TX_TEST] = 0x1, - [WM8996_DSP1_TX_LEFT_VOLUME] = 0xc0, - [WM8996_DSP1_TX_RIGHT_VOLUME] = 0xc0, - [WM8996_DSP1_RX_LEFT_VOLUME] = 0xc0, - [WM8996_DSP1_RX_RIGHT_VOLUME] = 0xc0, - [WM8996_DSP1_TX_FILTERS] = 0x2000, - [WM8996_DSP1_RX_FILTERS_1] = 0x200, - [WM8996_DSP1_RX_FILTERS_2] = 0x10, - [WM8996_DSP1_DRC_1] = 0x98, - [WM8996_DSP1_DRC_2] = 0x845, - [WM8996_DSP1_RX_EQ_GAINS_1] = 0x6318, - [WM8996_DSP1_RX_EQ_GAINS_2] = 0x6300, - [WM8996_DSP1_RX_EQ_BAND_1_A] = 0xfca, - [WM8996_DSP1_RX_EQ_BAND_1_B] = 0x400, - [WM8996_DSP1_RX_EQ_BAND_1_PG] = 0xd8, - [WM8996_DSP1_RX_EQ_BAND_2_A] = 0x1eb5, - [WM8996_DSP1_RX_EQ_BAND_2_B] = 0xf145, - [WM8996_DSP1_RX_EQ_BAND_2_C] = 0xb75, - [WM8996_DSP1_RX_EQ_BAND_2_PG] = 0x1c5, - [WM8996_DSP1_RX_EQ_BAND_3_A] = 0x1c58, - [WM8996_DSP1_RX_EQ_BAND_3_B] = 0xf373, - [WM8996_DSP1_RX_EQ_BAND_3_C] = 0xa54, - [WM8996_DSP1_RX_EQ_BAND_3_PG] = 0x558, - [WM8996_DSP1_RX_EQ_BAND_4_A] = 0x168e, - [WM8996_DSP1_RX_EQ_BAND_4_B] = 0xf829, - [WM8996_DSP1_RX_EQ_BAND_4_C] = 0x7ad, - [WM8996_DSP1_RX_EQ_BAND_4_PG] = 0x1103, - [WM8996_DSP1_RX_EQ_BAND_5_A] = 0x564, - [WM8996_DSP1_RX_EQ_BAND_5_B] = 0x559, - [WM8996_DSP1_RX_EQ_BAND_5_PG] = 0x4000, - [WM8996_DSP2_TX_LEFT_VOLUME] = 0xc0, - [WM8996_DSP2_TX_RIGHT_VOLUME] = 0xc0, - [WM8996_DSP2_RX_LEFT_VOLUME] = 0xc0, - [WM8996_DSP2_RX_RIGHT_VOLUME] = 0xc0, - [WM8996_DSP2_TX_FILTERS] = 0x2000, - [WM8996_DSP2_RX_FILTERS_1] = 0x200, - [WM8996_DSP2_RX_FILTERS_2] = 0x10, - [WM8996_DSP2_DRC_1] = 0x98, - [WM8996_DSP2_DRC_2] = 0x845, - [WM8996_DSP2_RX_EQ_GAINS_1] = 0x6318, - [WM8996_DSP2_RX_EQ_GAINS_2] = 0x6300, - [WM8996_DSP2_RX_EQ_BAND_1_A] = 0xfca, - [WM8996_DSP2_RX_EQ_BAND_1_B] = 0x400, - [WM8996_DSP2_RX_EQ_BAND_1_PG] = 0xd8, - [WM8996_DSP2_RX_EQ_BAND_2_A] = 0x1eb5, - [WM8996_DSP2_RX_EQ_BAND_2_B] = 0xf145, - [WM8996_DSP2_RX_EQ_BAND_2_C] = 0xb75, - [WM8996_DSP2_RX_EQ_BAND_2_PG] = 0x1c5, - [WM8996_DSP2_RX_EQ_BAND_3_A] = 0x1c58, - [WM8996_DSP2_RX_EQ_BAND_3_B] = 0xf373, - [WM8996_DSP2_RX_EQ_BAND_3_C] = 0xa54, - [WM8996_DSP2_RX_EQ_BAND_3_PG] = 0x558, - [WM8996_DSP2_RX_EQ_BAND_4_A] = 0x168e, - [WM8996_DSP2_RX_EQ_BAND_4_B] = 0xf829, - [WM8996_DSP2_RX_EQ_BAND_4_C] = 0x7ad, - [WM8996_DSP2_RX_EQ_BAND_4_PG] = 0x1103, - [WM8996_DSP2_RX_EQ_BAND_5_A] = 0x564, - [WM8996_DSP2_RX_EQ_BAND_5_B] = 0x559, - [WM8996_DSP2_RX_EQ_BAND_5_PG] = 0x4000, - [WM8996_OVERSAMPLING] = 0xd, - [WM8996_SIDETONE] = 0x1040, - [WM8996_GPIO_1] = 0xa101, - [WM8996_GPIO_2] = 0xa101, - [WM8996_GPIO_3] = 0xa101, - [WM8996_GPIO_4] = 0xa101, - [WM8996_GPIO_5] = 0xa101, - [WM8996_PULL_CONTROL_2] = 0x140, - [WM8996_INTERRUPT_STATUS_1_MASK] = 0x1f, - [WM8996_INTERRUPT_STATUS_2_MASK] = 0x1ecf, - [WM8996_RIGHT_PDM_SPEAKER] = 0x1, - [WM8996_PDM_SPEAKER_MUTE_SEQUENCE] = 0x69, - [WM8996_PDM_SPEAKER_VOLUME] = 0x66, - [WM8996_WRITE_SEQUENCER_0] = 0x1, - [WM8996_WRITE_SEQUENCER_1] = 0x1, - [WM8996_WRITE_SEQUENCER_3] = 0x6, - [WM8996_WRITE_SEQUENCER_4] = 0x40, - [WM8996_WRITE_SEQUENCER_5] = 0x1, - [WM8996_WRITE_SEQUENCER_6] = 0xf, - [WM8996_WRITE_SEQUENCER_7] = 0x6, - [WM8996_WRITE_SEQUENCER_8] = 0x1, - [WM8996_WRITE_SEQUENCER_9] = 0x3, - [WM8996_WRITE_SEQUENCER_10] = 0x104, - [WM8996_WRITE_SEQUENCER_12] = 0x60, - [WM8996_WRITE_SEQUENCER_13] = 0x11, - [WM8996_WRITE_SEQUENCER_14] = 0x401, - [WM8996_WRITE_SEQUENCER_16] = 0x50, - [WM8996_WRITE_SEQUENCER_17] = 0x3, - [WM8996_WRITE_SEQUENCER_18] = 0x100, - [WM8996_WRITE_SEQUENCER_20] = 0x51, - [WM8996_WRITE_SEQUENCER_21] = 0x3, - [WM8996_WRITE_SEQUENCER_22] = 0x104, - [WM8996_WRITE_SEQUENCER_23] = 0xa, - [WM8996_WRITE_SEQUENCER_24] = 0x60, - [WM8996_WRITE_SEQUENCER_25] = 0x3b, - [WM8996_WRITE_SEQUENCER_26] = 0x502, - [WM8996_WRITE_SEQUENCER_27] = 0x100, - [WM8996_WRITE_SEQUENCER_28] = 0x2fff, - [WM8996_WRITE_SEQUENCER_32] = 0x2fff, - [WM8996_WRITE_SEQUENCER_36] = 0x2fff, - [WM8996_WRITE_SEQUENCER_40] = 0x2fff, - [WM8996_WRITE_SEQUENCER_44] = 0x2fff, - [WM8996_WRITE_SEQUENCER_48] = 0x2fff, - [WM8996_WRITE_SEQUENCER_52] = 0x2fff, - [WM8996_WRITE_SEQUENCER_56] = 0x2fff, - [WM8996_WRITE_SEQUENCER_60] = 0x2fff, - [WM8996_WRITE_SEQUENCER_64] = 0x1, - [WM8996_WRITE_SEQUENCER_65] = 0x1, - [WM8996_WRITE_SEQUENCER_67] = 0x6, - [WM8996_WRITE_SEQUENCER_68] = 0x40, - [WM8996_WRITE_SEQUENCER_69] = 0x1, - [WM8996_WRITE_SEQUENCER_70] = 0xf, - [WM8996_WRITE_SEQUENCER_71] = 0x6, - [WM8996_WRITE_SEQUENCER_72] = 0x1, - [WM8996_WRITE_SEQUENCER_73] = 0x3, - [WM8996_WRITE_SEQUENCER_74] = 0x104, - [WM8996_WRITE_SEQUENCER_76] = 0x60, - [WM8996_WRITE_SEQUENCER_77] = 0x11, - [WM8996_WRITE_SEQUENCER_78] = 0x401, - [WM8996_WRITE_SEQUENCER_80] = 0x50, - [WM8996_WRITE_SEQUENCER_81] = 0x3, - [WM8996_WRITE_SEQUENCER_82] = 0x100, - [WM8996_WRITE_SEQUENCER_84] = 0x60, - [WM8996_WRITE_SEQUENCER_85] = 0x3b, - [WM8996_WRITE_SEQUENCER_86] = 0x502, - [WM8996_WRITE_SEQUENCER_87] = 0x100, - [WM8996_WRITE_SEQUENCER_88] = 0x2fff, - [WM8996_WRITE_SEQUENCER_92] = 0x2fff, - [WM8996_WRITE_SEQUENCER_96] = 0x2fff, - [WM8996_WRITE_SEQUENCER_100] = 0x2fff, - [WM8996_WRITE_SEQUENCER_104] = 0x2fff, - [WM8996_WRITE_SEQUENCER_108] = 0x2fff, - [WM8996_WRITE_SEQUENCER_112] = 0x2fff, - [WM8996_WRITE_SEQUENCER_116] = 0x2fff, - [WM8996_WRITE_SEQUENCER_120] = 0x2fff, - [WM8996_WRITE_SEQUENCER_124] = 0x2fff, - [WM8996_WRITE_SEQUENCER_128] = 0x1, - [WM8996_WRITE_SEQUENCER_129] = 0x1, - [WM8996_WRITE_SEQUENCER_131] = 0x6, - [WM8996_WRITE_SEQUENCER_132] = 0x40, - [WM8996_WRITE_SEQUENCER_133] = 0x1, - [WM8996_WRITE_SEQUENCER_134] = 0xf, - [WM8996_WRITE_SEQUENCER_135] = 0x6, - [WM8996_WRITE_SEQUENCER_136] = 0x1, - [WM8996_WRITE_SEQUENCER_137] = 0x3, - [WM8996_WRITE_SEQUENCER_138] = 0x106, - [WM8996_WRITE_SEQUENCER_140] = 0x61, - [WM8996_WRITE_SEQUENCER_141] = 0x11, - [WM8996_WRITE_SEQUENCER_142] = 0x401, - [WM8996_WRITE_SEQUENCER_144] = 0x50, - [WM8996_WRITE_SEQUENCER_145] = 0x3, - [WM8996_WRITE_SEQUENCER_146] = 0x102, - [WM8996_WRITE_SEQUENCER_148] = 0x51, - [WM8996_WRITE_SEQUENCER_149] = 0x3, - [WM8996_WRITE_SEQUENCER_150] = 0x106, - [WM8996_WRITE_SEQUENCER_151] = 0xa, - [WM8996_WRITE_SEQUENCER_152] = 0x61, - [WM8996_WRITE_SEQUENCER_153] = 0x3b, - [WM8996_WRITE_SEQUENCER_154] = 0x502, - [WM8996_WRITE_SEQUENCER_155] = 0x100, - [WM8996_WRITE_SEQUENCER_156] = 0x2fff, - [WM8996_WRITE_SEQUENCER_160] = 0x2fff, - [WM8996_WRITE_SEQUENCER_164] = 0x2fff, - [WM8996_WRITE_SEQUENCER_168] = 0x2fff, - [WM8996_WRITE_SEQUENCER_172] = 0x2fff, - [WM8996_WRITE_SEQUENCER_176] = 0x2fff, - [WM8996_WRITE_SEQUENCER_180] = 0x2fff, - [WM8996_WRITE_SEQUENCER_184] = 0x2fff, - [WM8996_WRITE_SEQUENCER_188] = 0x2fff, - [WM8996_WRITE_SEQUENCER_192] = 0x1, - [WM8996_WRITE_SEQUENCER_193] = 0x1, - [WM8996_WRITE_SEQUENCER_195] = 0x6, - [WM8996_WRITE_SEQUENCER_196] = 0x40, - [WM8996_WRITE_SEQUENCER_197] = 0x1, - [WM8996_WRITE_SEQUENCER_198] = 0xf, - [WM8996_WRITE_SEQUENCER_199] = 0x6, - [WM8996_WRITE_SEQUENCER_200] = 0x1, - [WM8996_WRITE_SEQUENCER_201] = 0x3, - [WM8996_WRITE_SEQUENCER_202] = 0x106, - [WM8996_WRITE_SEQUENCER_204] = 0x61, - [WM8996_WRITE_SEQUENCER_205] = 0x11, - [WM8996_WRITE_SEQUENCER_206] = 0x401, - [WM8996_WRITE_SEQUENCER_208] = 0x50, - [WM8996_WRITE_SEQUENCER_209] = 0x3, - [WM8996_WRITE_SEQUENCER_210] = 0x102, - [WM8996_WRITE_SEQUENCER_212] = 0x61, - [WM8996_WRITE_SEQUENCER_213] = 0x3b, - [WM8996_WRITE_SEQUENCER_214] = 0x502, - [WM8996_WRITE_SEQUENCER_215] = 0x100, - [WM8996_WRITE_SEQUENCER_216] = 0x2fff, - [WM8996_WRITE_SEQUENCER_220] = 0x2fff, - [WM8996_WRITE_SEQUENCER_224] = 0x2fff, - [WM8996_WRITE_SEQUENCER_228] = 0x2fff, - [WM8996_WRITE_SEQUENCER_232] = 0x2fff, - [WM8996_WRITE_SEQUENCER_236] = 0x2fff, - [WM8996_WRITE_SEQUENCER_240] = 0x2fff, - [WM8996_WRITE_SEQUENCER_244] = 0x2fff, - [WM8996_WRITE_SEQUENCER_248] = 0x2fff, - [WM8996_WRITE_SEQUENCER_252] = 0x2fff, - [WM8996_WRITE_SEQUENCER_256] = 0x60, - [WM8996_WRITE_SEQUENCER_258] = 0x601, - [WM8996_WRITE_SEQUENCER_260] = 0x50, - [WM8996_WRITE_SEQUENCER_262] = 0x100, - [WM8996_WRITE_SEQUENCER_264] = 0x1, - [WM8996_WRITE_SEQUENCER_266] = 0x104, - [WM8996_WRITE_SEQUENCER_267] = 0x100, - [WM8996_WRITE_SEQUENCER_268] = 0x2fff, - [WM8996_WRITE_SEQUENCER_272] = 0x2fff, - [WM8996_WRITE_SEQUENCER_276] = 0x2fff, - [WM8996_WRITE_SEQUENCER_280] = 0x2fff, - [WM8996_WRITE_SEQUENCER_284] = 0x2fff, - [WM8996_WRITE_SEQUENCER_288] = 0x2fff, - [WM8996_WRITE_SEQUENCER_292] = 0x2fff, - [WM8996_WRITE_SEQUENCER_296] = 0x2fff, - [WM8996_WRITE_SEQUENCER_300] = 0x2fff, - [WM8996_WRITE_SEQUENCER_304] = 0x2fff, - [WM8996_WRITE_SEQUENCER_308] = 0x2fff, - [WM8996_WRITE_SEQUENCER_312] = 0x2fff, - [WM8996_WRITE_SEQUENCER_316] = 0x2fff, - [WM8996_WRITE_SEQUENCER_320] = 0x61, - [WM8996_WRITE_SEQUENCER_322] = 0x601, - [WM8996_WRITE_SEQUENCER_324] = 0x50, - [WM8996_WRITE_SEQUENCER_326] = 0x102, - [WM8996_WRITE_SEQUENCER_328] = 0x1, - [WM8996_WRITE_SEQUENCER_330] = 0x106, - [WM8996_WRITE_SEQUENCER_331] = 0x100, - [WM8996_WRITE_SEQUENCER_332] = 0x2fff, - [WM8996_WRITE_SEQUENCER_336] = 0x2fff, - [WM8996_WRITE_SEQUENCER_340] = 0x2fff, - [WM8996_WRITE_SEQUENCER_344] = 0x2fff, - [WM8996_WRITE_SEQUENCER_348] = 0x2fff, - [WM8996_WRITE_SEQUENCER_352] = 0x2fff, - [WM8996_WRITE_SEQUENCER_356] = 0x2fff, - [WM8996_WRITE_SEQUENCER_360] = 0x2fff, - [WM8996_WRITE_SEQUENCER_364] = 0x2fff, - [WM8996_WRITE_SEQUENCER_368] = 0x2fff, - [WM8996_WRITE_SEQUENCER_372] = 0x2fff, - [WM8996_WRITE_SEQUENCER_376] = 0x2fff, - [WM8996_WRITE_SEQUENCER_380] = 0x2fff, - [WM8996_WRITE_SEQUENCER_384] = 0x60, - [WM8996_WRITE_SEQUENCER_386] = 0x601, - [WM8996_WRITE_SEQUENCER_388] = 0x61, - [WM8996_WRITE_SEQUENCER_390] = 0x601, - [WM8996_WRITE_SEQUENCER_392] = 0x50, - [WM8996_WRITE_SEQUENCER_394] = 0x300, - [WM8996_WRITE_SEQUENCER_396] = 0x1, - [WM8996_WRITE_SEQUENCER_398] = 0x304, - [WM8996_WRITE_SEQUENCER_400] = 0x40, - [WM8996_WRITE_SEQUENCER_402] = 0xf, - [WM8996_WRITE_SEQUENCER_404] = 0x1, - [WM8996_WRITE_SEQUENCER_407] = 0x100, +static struct reg_default wm8996_reg[] = { + { WM8996_SOFTWARE_RESET, 0x8996 }, + { WM8996_POWER_MANAGEMENT_1, 0x0 }, + { WM8996_POWER_MANAGEMENT_2, 0x0 }, + { WM8996_POWER_MANAGEMENT_3, 0x0 }, + { WM8996_POWER_MANAGEMENT_4, 0x0 }, + { WM8996_POWER_MANAGEMENT_5, 0x0 }, + { WM8996_POWER_MANAGEMENT_6, 0x0 }, + { WM8996_POWER_MANAGEMENT_7, 0x10 }, + { WM8996_POWER_MANAGEMENT_8, 0x0 }, + { WM8996_LEFT_LINE_INPUT_VOLUME, 0x0 }, + { WM8996_RIGHT_LINE_INPUT_VOLUME, 0x0 }, + { WM8996_LINE_INPUT_CONTROL, 0x0 }, + { WM8996_DAC1_HPOUT1_VOLUME, 0x88 }, + { WM8996_DAC2_HPOUT2_VOLUME, 0x88 }, + { WM8996_DAC1_LEFT_VOLUME, 0x2c0 }, + { WM8996_DAC1_RIGHT_VOLUME, 0x2c0 }, + { WM8996_DAC2_LEFT_VOLUME, 0x2c0 }, + { WM8996_DAC2_RIGHT_VOLUME, 0x2c0 }, + { WM8996_OUTPUT1_LEFT_VOLUME, 0x80 }, + { WM8996_OUTPUT1_RIGHT_VOLUME, 0x80 }, + { WM8996_OUTPUT2_LEFT_VOLUME, 0x80 }, + { WM8996_OUTPUT2_RIGHT_VOLUME, 0x80 }, + { WM8996_MICBIAS_1, 0x39 }, + { WM8996_MICBIAS_2, 0x39 }, + { WM8996_LDO_1, 0x3 }, + { WM8996_LDO_2, 0x13 }, + { WM8996_ACCESSORY_DETECT_MODE_1, 0x4 }, + { WM8996_ACCESSORY_DETECT_MODE_2, 0x0 }, + { WM8996_HEADPHONE_DETECT_1, 0x20 }, + { WM8996_HEADPHONE_DETECT_2, 0x0 }, + { WM8996_MIC_DETECT_1, 0x7600 }, + { WM8996_MIC_DETECT_2, 0xbf }, + { WM8996_CHARGE_PUMP_1, 0x1f25 }, + { WM8996_CHARGE_PUMP_2, 0xab19 }, + { WM8996_DC_SERVO_1, 0x0 }, + { WM8996_DC_SERVO_2, 0x0 }, + { WM8996_DC_SERVO_3, 0x0 }, + { WM8996_DC_SERVO_5, 0x2a2a }, + { WM8996_DC_SERVO_6, 0x0 }, + { WM8996_DC_SERVO_7, 0x0 }, + { WM8996_ANALOGUE_HP_1, 0x0 }, + { WM8996_ANALOGUE_HP_2, 0x0 }, + { WM8996_CONTROL_INTERFACE_1, 0x8004 }, + { WM8996_WRITE_SEQUENCER_CTRL_1, 0x0 }, + { WM8996_WRITE_SEQUENCER_CTRL_2, 0x0 }, + { WM8996_AIF_CLOCKING_1, 0x0 }, + { WM8996_AIF_CLOCKING_2, 0x0 }, + { WM8996_CLOCKING_1, 0x10 }, + { WM8996_CLOCKING_2, 0x0 }, + { WM8996_AIF_RATE, 0x83 }, + { WM8996_FLL_CONTROL_1, 0x0 }, + { WM8996_FLL_CONTROL_2, 0x0 }, + { WM8996_FLL_CONTROL_3, 0x0 }, + { WM8996_FLL_CONTROL_4, 0x5dc0 }, + { WM8996_FLL_CONTROL_5, 0xc84 }, + { WM8996_FLL_EFS_1, 0x0 }, + { WM8996_FLL_EFS_2, 0x2 }, + { WM8996_AIF1_CONTROL, 0x0 }, + { WM8996_AIF1_BCLK, 0x0 }, + { WM8996_AIF1_TX_LRCLK_1, 0x80 }, + { WM8996_AIF1_TX_LRCLK_2, 0x8 }, + { WM8996_AIF1_RX_LRCLK_1, 0x80 }, + { WM8996_AIF1_RX_LRCLK_2, 0x0 }, + { WM8996_AIF1TX_DATA_CONFIGURATION_1, 0x1818 }, + { WM8996_AIF1TX_DATA_CONFIGURATION_2, 0 }, + { WM8996_AIF1RX_DATA_CONFIGURATION, 0x1818 }, + { WM8996_AIF1TX_CHANNEL_0_CONFIGURATION, 0x0 }, + { WM8996_AIF1TX_CHANNEL_1_CONFIGURATION, 0x0 }, + { WM8996_AIF1TX_CHANNEL_2_CONFIGURATION, 0x0 }, + { WM8996_AIF1TX_CHANNEL_3_CONFIGURATION, 0x0 }, + { WM8996_AIF1TX_CHANNEL_4_CONFIGURATION, 0x0 }, + { WM8996_AIF1TX_CHANNEL_5_CONFIGURATION, 0x0 }, + { WM8996_AIF1RX_CHANNEL_0_CONFIGURATION, 0x0 }, + { WM8996_AIF1RX_CHANNEL_1_CONFIGURATION, 0x0 }, + { WM8996_AIF1RX_CHANNEL_2_CONFIGURATION, 0x0 }, + { WM8996_AIF1RX_CHANNEL_3_CONFIGURATION, 0x0 }, + { WM8996_AIF1RX_CHANNEL_4_CONFIGURATION, 0x0 }, + { WM8996_AIF1RX_CHANNEL_5_CONFIGURATION, 0x0 }, + { WM8996_AIF1RX_MONO_CONFIGURATION, 0x0 }, + { WM8996_AIF1TX_TEST, 0x7 }, + { WM8996_AIF2_CONTROL, 0x0 }, + { WM8996_AIF2_BCLK, 0x0 }, + { WM8996_AIF2_TX_LRCLK_1, 0x80 }, + { WM8996_AIF2_TX_LRCLK_2, 0x8 }, + { WM8996_AIF2_RX_LRCLK_1, 0x80 }, + { WM8996_AIF2_RX_LRCLK_2, 0x0 }, + { WM8996_AIF2TX_DATA_CONFIGURATION_1, 0x1818 }, + { WM8996_AIF2RX_DATA_CONFIGURATION, 0x1818 }, + { WM8996_AIF2RX_DATA_CONFIGURATION, 0x0 }, + { WM8996_AIF2TX_CHANNEL_0_CONFIGURATION, 0x0 }, + { WM8996_AIF2TX_CHANNEL_1_CONFIGURATION, 0x0 }, + { WM8996_AIF2RX_CHANNEL_0_CONFIGURATION, 0x0 }, + { WM8996_AIF2RX_CHANNEL_1_CONFIGURATION, 0x0 }, + { WM8996_AIF2RX_MONO_CONFIGURATION, 0x0 }, + { WM8996_AIF2TX_TEST, 0x1 }, + { WM8996_DSP1_TX_LEFT_VOLUME, 0xc0 }, + { WM8996_DSP1_TX_RIGHT_VOLUME, 0xc0 }, + { WM8996_DSP1_RX_LEFT_VOLUME, 0xc0 }, + { WM8996_DSP1_RX_RIGHT_VOLUME, 0xc0 }, + { WM8996_DSP1_TX_FILTERS, 0x2000 }, + { WM8996_DSP1_RX_FILTERS_1, 0x200 }, + { WM8996_DSP1_RX_FILTERS_2, 0x10 }, + { WM8996_DSP1_DRC_1, 0x98 }, + { WM8996_DSP1_DRC_2, 0x845 }, + { WM8996_DSP1_RX_EQ_GAINS_1, 0x6318 }, + { WM8996_DSP1_RX_EQ_GAINS_2, 0x6300 }, + { WM8996_DSP1_RX_EQ_BAND_1_A, 0xfca }, + { WM8996_DSP1_RX_EQ_BAND_1_B, 0x400 }, + { WM8996_DSP1_RX_EQ_BAND_1_PG, 0xd8 }, + { WM8996_DSP1_RX_EQ_BAND_2_A, 0x1eb5 }, + { WM8996_DSP1_RX_EQ_BAND_2_B, 0xf145 }, + { WM8996_DSP1_RX_EQ_BAND_2_C, 0xb75 }, + { WM8996_DSP1_RX_EQ_BAND_2_PG, 0x1c5 }, + { WM8996_DSP1_RX_EQ_BAND_3_A, 0x1c58 }, + { WM8996_DSP1_RX_EQ_BAND_3_B, 0xf373 }, + { WM8996_DSP1_RX_EQ_BAND_3_C, 0xa54 }, + { WM8996_DSP1_RX_EQ_BAND_3_PG, 0x558 }, + { WM8996_DSP1_RX_EQ_BAND_4_A, 0x168e }, + { WM8996_DSP1_RX_EQ_BAND_4_B, 0xf829 }, + { WM8996_DSP1_RX_EQ_BAND_4_C, 0x7ad }, + { WM8996_DSP1_RX_EQ_BAND_4_PG, 0x1103 }, + { WM8996_DSP1_RX_EQ_BAND_5_A, 0x564 }, + { WM8996_DSP1_RX_EQ_BAND_5_B, 0x559 }, + { WM8996_DSP1_RX_EQ_BAND_5_PG, 0x4000 }, + { WM8996_DSP2_TX_LEFT_VOLUME, 0xc0 }, + { WM8996_DSP2_TX_RIGHT_VOLUME, 0xc0 }, + { WM8996_DSP2_RX_LEFT_VOLUME, 0xc0 }, + { WM8996_DSP2_RX_RIGHT_VOLUME, 0xc0 }, + { WM8996_DSP2_TX_FILTERS, 0x2000 }, + { WM8996_DSP2_RX_FILTERS_1, 0x200 }, + { WM8996_DSP2_RX_FILTERS_2, 0x10 }, + { WM8996_DSP2_DRC_1, 0x98 }, + { WM8996_DSP2_DRC_2, 0x845 }, + { WM8996_DSP2_RX_EQ_GAINS_1, 0x6318 }, + { WM8996_DSP2_RX_EQ_GAINS_2, 0x6300 }, + { WM8996_DSP2_RX_EQ_BAND_1_A, 0xfca }, + { WM8996_DSP2_RX_EQ_BAND_1_B, 0x400 }, + { WM8996_DSP2_RX_EQ_BAND_1_PG, 0xd8 }, + { WM8996_DSP2_RX_EQ_BAND_2_A, 0x1eb5 }, + { WM8996_DSP2_RX_EQ_BAND_2_B, 0xf145 }, + { WM8996_DSP2_RX_EQ_BAND_2_C, 0xb75 }, + { WM8996_DSP2_RX_EQ_BAND_2_PG, 0x1c5 }, + { WM8996_DSP2_RX_EQ_BAND_3_A, 0x1c58 }, + { WM8996_DSP2_RX_EQ_BAND_3_B, 0xf373 }, + { WM8996_DSP2_RX_EQ_BAND_3_C, 0xa54 }, + { WM8996_DSP2_RX_EQ_BAND_3_PG, 0x558 }, + { WM8996_DSP2_RX_EQ_BAND_4_A, 0x168e }, + { WM8996_DSP2_RX_EQ_BAND_4_B, 0xf829 }, + { WM8996_DSP2_RX_EQ_BAND_4_C, 0x7ad }, + { WM8996_DSP2_RX_EQ_BAND_4_PG, 0x1103 }, + { WM8996_DSP2_RX_EQ_BAND_5_A, 0x564 }, + { WM8996_DSP2_RX_EQ_BAND_5_B, 0x559 }, + { WM8996_DSP2_RX_EQ_BAND_5_PG, 0x4000 }, + { WM8996_DAC1_MIXER_VOLUMES, 0x0 }, + { WM8996_DAC1_LEFT_MIXER_ROUTING, 0x0 }, + { WM8996_DAC1_RIGHT_MIXER_ROUTING, 0x0 }, + { WM8996_DAC2_MIXER_VOLUMES, 0x0 }, + { WM8996_DAC2_LEFT_MIXER_ROUTING, 0x0 }, + { WM8996_DAC2_RIGHT_MIXER_ROUTING, 0x0 }, + { WM8996_DSP1_TX_LEFT_MIXER_ROUTING, 0x0 }, + { WM8996_DSP1_TX_RIGHT_MIXER_ROUTING, 0x0 }, + { WM8996_DSP2_TX_LEFT_MIXER_ROUTING, 0x0 }, + { WM8996_DSP2_TX_RIGHT_MIXER_ROUTING, 0x0 }, + { WM8996_DSP_TX_MIXER_SELECT, 0x0 }, + { WM8996_DAC_SOFTMUTE, 0x0 }, + { WM8996_OVERSAMPLING, 0xd }, + { WM8996_SIDETONE, 0x1040 }, + { WM8996_GPIO_1, 0xa101 }, + { WM8996_GPIO_2, 0xa101 }, + { WM8996_GPIO_3, 0xa101 }, + { WM8996_GPIO_4, 0xa101 }, + { WM8996_GPIO_5, 0xa101 }, + { WM8996_PULL_CONTROL_1, 0x0 }, + { WM8996_PULL_CONTROL_2, 0x140 }, + { WM8996_INTERRUPT_STATUS_1_MASK, 0x1f }, + { WM8996_INTERRUPT_STATUS_2_MASK, 0x1ecf }, + { WM8996_LEFT_PDM_SPEAKER, 0x0 }, + { WM8996_RIGHT_PDM_SPEAKER, 0x1 }, + { WM8996_PDM_SPEAKER_MUTE_SEQUENCE, 0x69 }, + { WM8996_PDM_SPEAKER_VOLUME, 0x66 }, + { WM8996_WRITE_SEQUENCER_0, 0x1 }, + { WM8996_WRITE_SEQUENCER_1, 0x1 }, + { WM8996_WRITE_SEQUENCER_3, 0x6 }, + { WM8996_WRITE_SEQUENCER_4, 0x40 }, + { WM8996_WRITE_SEQUENCER_5, 0x1 }, + { WM8996_WRITE_SEQUENCER_6, 0xf }, + { WM8996_WRITE_SEQUENCER_7, 0x6 }, + { WM8996_WRITE_SEQUENCER_8, 0x1 }, + { WM8996_WRITE_SEQUENCER_9, 0x3 }, + { WM8996_WRITE_SEQUENCER_10, 0x104 }, + { WM8996_WRITE_SEQUENCER_12, 0x60 }, + { WM8996_WRITE_SEQUENCER_13, 0x11 }, + { WM8996_WRITE_SEQUENCER_14, 0x401 }, + { WM8996_WRITE_SEQUENCER_16, 0x50 }, + { WM8996_WRITE_SEQUENCER_17, 0x3 }, + { WM8996_WRITE_SEQUENCER_18, 0x100 }, + { WM8996_WRITE_SEQUENCER_20, 0x51 }, + { WM8996_WRITE_SEQUENCER_21, 0x3 }, + { WM8996_WRITE_SEQUENCER_22, 0x104 }, + { WM8996_WRITE_SEQUENCER_23, 0xa }, + { WM8996_WRITE_SEQUENCER_24, 0x60 }, + { WM8996_WRITE_SEQUENCER_25, 0x3b }, + { WM8996_WRITE_SEQUENCER_26, 0x502 }, + { WM8996_WRITE_SEQUENCER_27, 0x100 }, + { WM8996_WRITE_SEQUENCER_28, 0x2fff }, + { WM8996_WRITE_SEQUENCER_32, 0x2fff }, + { WM8996_WRITE_SEQUENCER_36, 0x2fff }, + { WM8996_WRITE_SEQUENCER_40, 0x2fff }, + { WM8996_WRITE_SEQUENCER_44, 0x2fff }, + { WM8996_WRITE_SEQUENCER_48, 0x2fff }, + { WM8996_WRITE_SEQUENCER_52, 0x2fff }, + { WM8996_WRITE_SEQUENCER_56, 0x2fff }, + { WM8996_WRITE_SEQUENCER_60, 0x2fff }, + { WM8996_WRITE_SEQUENCER_64, 0x1 }, + { WM8996_WRITE_SEQUENCER_65, 0x1 }, + { WM8996_WRITE_SEQUENCER_67, 0x6 }, + { WM8996_WRITE_SEQUENCER_68, 0x40 }, + { WM8996_WRITE_SEQUENCER_69, 0x1 }, + { WM8996_WRITE_SEQUENCER_70, 0xf }, + { WM8996_WRITE_SEQUENCER_71, 0x6 }, + { WM8996_WRITE_SEQUENCER_72, 0x1 }, + { WM8996_WRITE_SEQUENCER_73, 0x3 }, + { WM8996_WRITE_SEQUENCER_74, 0x104 }, + { WM8996_WRITE_SEQUENCER_76, 0x60 }, + { WM8996_WRITE_SEQUENCER_77, 0x11 }, + { WM8996_WRITE_SEQUENCER_78, 0x401 }, + { WM8996_WRITE_SEQUENCER_80, 0x50 }, + { WM8996_WRITE_SEQUENCER_81, 0x3 }, + { WM8996_WRITE_SEQUENCER_82, 0x100 }, + { WM8996_WRITE_SEQUENCER_84, 0x60 }, + { WM8996_WRITE_SEQUENCER_85, 0x3b }, + { WM8996_WRITE_SEQUENCER_86, 0x502 }, + { WM8996_WRITE_SEQUENCER_87, 0x100 }, + { WM8996_WRITE_SEQUENCER_88, 0x2fff }, + { WM8996_WRITE_SEQUENCER_92, 0x2fff }, + { WM8996_WRITE_SEQUENCER_96, 0x2fff }, + { WM8996_WRITE_SEQUENCER_100, 0x2fff }, + { WM8996_WRITE_SEQUENCER_104, 0x2fff }, + { WM8996_WRITE_SEQUENCER_108, 0x2fff }, + { WM8996_WRITE_SEQUENCER_112, 0x2fff }, + { WM8996_WRITE_SEQUENCER_116, 0x2fff }, + { WM8996_WRITE_SEQUENCER_120, 0x2fff }, + { WM8996_WRITE_SEQUENCER_124, 0x2fff }, + { WM8996_WRITE_SEQUENCER_128, 0x1 }, + { WM8996_WRITE_SEQUENCER_129, 0x1 }, + { WM8996_WRITE_SEQUENCER_131, 0x6 }, + { WM8996_WRITE_SEQUENCER_132, 0x40 }, + { WM8996_WRITE_SEQUENCER_133, 0x1 }, + { WM8996_WRITE_SEQUENCER_134, 0xf }, + { WM8996_WRITE_SEQUENCER_135, 0x6 }, + { WM8996_WRITE_SEQUENCER_136, 0x1 }, + { WM8996_WRITE_SEQUENCER_137, 0x3 }, + { WM8996_WRITE_SEQUENCER_138, 0x106 }, + { WM8996_WRITE_SEQUENCER_140, 0x61 }, + { WM8996_WRITE_SEQUENCER_141, 0x11 }, + { WM8996_WRITE_SEQUENCER_142, 0x401 }, + { WM8996_WRITE_SEQUENCER_144, 0x50 }, + { WM8996_WRITE_SEQUENCER_145, 0x3 }, + { WM8996_WRITE_SEQUENCER_146, 0x102 }, + { WM8996_WRITE_SEQUENCER_148, 0x51 }, + { WM8996_WRITE_SEQUENCER_149, 0x3 }, + { WM8996_WRITE_SEQUENCER_150, 0x106 }, + { WM8996_WRITE_SEQUENCER_151, 0xa }, + { WM8996_WRITE_SEQUENCER_152, 0x61 }, + { WM8996_WRITE_SEQUENCER_153, 0x3b }, + { WM8996_WRITE_SEQUENCER_154, 0x502 }, + { WM8996_WRITE_SEQUENCER_155, 0x100 }, + { WM8996_WRITE_SEQUENCER_156, 0x2fff }, + { WM8996_WRITE_SEQUENCER_160, 0x2fff }, + { WM8996_WRITE_SEQUENCER_164, 0x2fff }, + { WM8996_WRITE_SEQUENCER_168, 0x2fff }, + { WM8996_WRITE_SEQUENCER_172, 0x2fff }, + { WM8996_WRITE_SEQUENCER_176, 0x2fff }, + { WM8996_WRITE_SEQUENCER_180, 0x2fff }, + { WM8996_WRITE_SEQUENCER_184, 0x2fff }, + { WM8996_WRITE_SEQUENCER_188, 0x2fff }, + { WM8996_WRITE_SEQUENCER_192, 0x1 }, + { WM8996_WRITE_SEQUENCER_193, 0x1 }, + { WM8996_WRITE_SEQUENCER_195, 0x6 }, + { WM8996_WRITE_SEQUENCER_196, 0x40 }, + { WM8996_WRITE_SEQUENCER_197, 0x1 }, + { WM8996_WRITE_SEQUENCER_198, 0xf }, + { WM8996_WRITE_SEQUENCER_199, 0x6 }, + { WM8996_WRITE_SEQUENCER_200, 0x1 }, + { WM8996_WRITE_SEQUENCER_201, 0x3 }, + { WM8996_WRITE_SEQUENCER_202, 0x106 }, + { WM8996_WRITE_SEQUENCER_204, 0x61 }, + { WM8996_WRITE_SEQUENCER_205, 0x11 }, + { WM8996_WRITE_SEQUENCER_206, 0x401 }, + { WM8996_WRITE_SEQUENCER_208, 0x50 }, + { WM8996_WRITE_SEQUENCER_209, 0x3 }, + { WM8996_WRITE_SEQUENCER_210, 0x102 }, + { WM8996_WRITE_SEQUENCER_212, 0x61 }, + { WM8996_WRITE_SEQUENCER_213, 0x3b }, + { WM8996_WRITE_SEQUENCER_214, 0x502 }, + { WM8996_WRITE_SEQUENCER_215, 0x100 }, + { WM8996_WRITE_SEQUENCER_216, 0x2fff }, + { WM8996_WRITE_SEQUENCER_220, 0x2fff }, + { WM8996_WRITE_SEQUENCER_224, 0x2fff }, + { WM8996_WRITE_SEQUENCER_228, 0x2fff }, + { WM8996_WRITE_SEQUENCER_232, 0x2fff }, + { WM8996_WRITE_SEQUENCER_236, 0x2fff }, + { WM8996_WRITE_SEQUENCER_240, 0x2fff }, + { WM8996_WRITE_SEQUENCER_244, 0x2fff }, + { WM8996_WRITE_SEQUENCER_248, 0x2fff }, + { WM8996_WRITE_SEQUENCER_252, 0x2fff }, + { WM8996_WRITE_SEQUENCER_256, 0x60 }, + { WM8996_WRITE_SEQUENCER_258, 0x601 }, + { WM8996_WRITE_SEQUENCER_260, 0x50 }, + { WM8996_WRITE_SEQUENCER_262, 0x100 }, + { WM8996_WRITE_SEQUENCER_264, 0x1 }, + { WM8996_WRITE_SEQUENCER_266, 0x104 }, + { WM8996_WRITE_SEQUENCER_267, 0x100 }, + { WM8996_WRITE_SEQUENCER_268, 0x2fff }, + { WM8996_WRITE_SEQUENCER_272, 0x2fff }, + { WM8996_WRITE_SEQUENCER_276, 0x2fff }, + { WM8996_WRITE_SEQUENCER_280, 0x2fff }, + { WM8996_WRITE_SEQUENCER_284, 0x2fff }, + { WM8996_WRITE_SEQUENCER_288, 0x2fff }, + { WM8996_WRITE_SEQUENCER_292, 0x2fff }, + { WM8996_WRITE_SEQUENCER_296, 0x2fff }, + { WM8996_WRITE_SEQUENCER_300, 0x2fff }, + { WM8996_WRITE_SEQUENCER_304, 0x2fff }, + { WM8996_WRITE_SEQUENCER_308, 0x2fff }, + { WM8996_WRITE_SEQUENCER_312, 0x2fff }, + { WM8996_WRITE_SEQUENCER_316, 0x2fff }, + { WM8996_WRITE_SEQUENCER_320, 0x61 }, + { WM8996_WRITE_SEQUENCER_322, 0x601 }, + { WM8996_WRITE_SEQUENCER_324, 0x50 }, + { WM8996_WRITE_SEQUENCER_326, 0x102 }, + { WM8996_WRITE_SEQUENCER_328, 0x1 }, + { WM8996_WRITE_SEQUENCER_330, 0x106 }, + { WM8996_WRITE_SEQUENCER_331, 0x100 }, + { WM8996_WRITE_SEQUENCER_332, 0x2fff }, + { WM8996_WRITE_SEQUENCER_336, 0x2fff }, + { WM8996_WRITE_SEQUENCER_340, 0x2fff }, + { WM8996_WRITE_SEQUENCER_344, 0x2fff }, + { WM8996_WRITE_SEQUENCER_348, 0x2fff }, + { WM8996_WRITE_SEQUENCER_352, 0x2fff }, + { WM8996_WRITE_SEQUENCER_356, 0x2fff }, + { WM8996_WRITE_SEQUENCER_360, 0x2fff }, + { WM8996_WRITE_SEQUENCER_364, 0x2fff }, + { WM8996_WRITE_SEQUENCER_368, 0x2fff }, + { WM8996_WRITE_SEQUENCER_372, 0x2fff }, + { WM8996_WRITE_SEQUENCER_376, 0x2fff }, + { WM8996_WRITE_SEQUENCER_380, 0x2fff }, + { WM8996_WRITE_SEQUENCER_384, 0x60 }, + { WM8996_WRITE_SEQUENCER_386, 0x601 }, + { WM8996_WRITE_SEQUENCER_388, 0x61 }, + { WM8996_WRITE_SEQUENCER_390, 0x601 }, + { WM8996_WRITE_SEQUENCER_392, 0x50 }, + { WM8996_WRITE_SEQUENCER_394, 0x300 }, + { WM8996_WRITE_SEQUENCER_396, 0x1 }, + { WM8996_WRITE_SEQUENCER_398, 0x304 }, + { WM8996_WRITE_SEQUENCER_400, 0x40 }, + { WM8996_WRITE_SEQUENCER_402, 0xf }, + { WM8996_WRITE_SEQUENCER_404, 0x1 }, + { WM8996_WRITE_SEQUENCER_407, 0x100 }, }; static const DECLARE_TLV_DB_SCALE(inpga_tlv, 0, 100, 0); @@ -1413,8 +1482,7 @@ static const struct snd_soc_dapm_route wm8996_dapm_routes[] = { { "SPKDAT", NULL, "SPKR PGA" }, }; -static int wm8996_readable_register(struct snd_soc_codec *codec, - unsigned int reg) +static bool wm8996_readable_register(struct device *dev, unsigned int reg) { /* Due to the sparseness of the register map the compiler * output from an explicit switch statement ends up being much @@ -1621,8 +1689,7 @@ static int wm8996_readable_register(struct snd_soc_codec *codec, } } -static int wm8996_volatile_register(struct snd_soc_codec *codec, - unsigned int reg) +static bool wm8996_volatile_register(struct device *dev, unsigned int reg) { switch (reg) { case WM8996_SOFTWARE_RESET: @@ -1723,13 +1790,13 @@ static int wm8996_set_bias_level(struct snd_soc_codec *codec, msleep(5); } - codec->cache_only = false; - snd_soc_cache_sync(codec); + regcache_cache_only(codec->control_data, false); + regcache_sync(codec->control_data); } break; case SND_SOC_BIAS_OFF: - codec->cache_only = true; + regcache_cache_only(codec->control_data, true); if (wm8996->pdata.ldo_ena >= 0) gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0); regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), @@ -2692,6 +2759,18 @@ static void wm8996_retune_mobile_pdata(struct snd_soc_codec *codec) "Failed to add ReTune Mobile controls: %d\n", ret); } +static const struct regmap_config wm8996_regmap = { + .reg_bits = 16, + .val_bits = 16, + + .max_register = WM8996_MAX_REGISTER, + .reg_defaults = wm8996_reg, + .num_reg_defaults = ARRAY_SIZE(wm8996_reg), + .volatile_reg = wm8996_volatile_register, + .readable_reg = wm8996_readable_register, + .cache_type = REGCACHE_RBTREE, +}; + static int wm8996_probe(struct snd_soc_codec *codec) { int ret; @@ -2707,10 +2786,17 @@ static int wm8996_probe(struct snd_soc_codec *codec) dapm->idle_bias_off = true; - ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C); + codec->control_data = regmap_init_i2c(i2c, &wm8996_regmap); + if (IS_ERR(codec->control_data)) { + ret = PTR_ERR(codec->control_data); + dev_err(codec->dev, "regmap_init() failed: %d\n", ret); + goto err; + } + + ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP); if (ret != 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); - goto err; + goto err_regmap; } for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) @@ -2720,7 +2806,7 @@ static int wm8996_probe(struct snd_soc_codec *codec) wm8996->supplies); if (ret != 0) { dev_err(codec->dev, "Failed to request supplies: %d\n", ret); - goto err; + goto err_regmap; } wm8996->disable_nb[0].notifier_call = wm8996_regulator_event_0; @@ -2788,7 +2874,7 @@ static int wm8996_probe(struct snd_soc_codec *codec) } } - codec->cache_only = true; + regcache_cache_only(codec->control_data, true); /* Apply platform data settings */ snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL, @@ -2996,6 +3082,8 @@ err_cpvdd: regulator_put(wm8996->cpvdd); err_get: regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); +err_regmap: + regmap_exit(codec->control_data); err: return ret; } @@ -3019,6 +3107,7 @@ static int wm8996_remove(struct snd_soc_codec *codec) &wm8996->disable_nb[i]); regulator_put(wm8996->cpvdd); regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); + regmap_exit(codec->control_data); return 0; } @@ -3028,12 +3117,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8996 = { .remove = wm8996_remove, .set_bias_level = wm8996_set_bias_level, .seq_notifier = wm8996_seq_notifier, - .reg_cache_size = WM8996_MAX_REGISTER + 1, - .reg_word_size = sizeof(u16), - .reg_cache_default = wm8996_reg, - .volatile_register = wm8996_volatile_register, - .readable_register = wm8996_readable_register, - .compress_type = SND_SOC_RBTREE_COMPRESSION, .controls = wm8996_snd_controls, .num_controls = ARRAY_SIZE(wm8996_snd_controls), .dapm_widgets = wm8996_dapm_widgets, -- 1.7.7.1

1 2

Re: [alsa-devel] [PATCH] ASoC don't clobber platform DMA driver ops
by Mark Brown 01 Nov '11

01 Nov '11

On Tue, Nov 01, 2011 at 06:57:47PM +0000, Tull Alan-R80115 wrote: On public Linux lists you should never top post (so people have context and know what you're talking about) and you should fix your mail client to word wrap within paragraphs. > I originally started down the path you are describing, but quickly ran > into problems. I started by adding a soc_pcm_copy and soc_pcm_mmap > and found that I needed to pull code from ALSA core in to handle the > case where copy or mmap was NULL for a given platform driver. In that case your changelog needs to explain this and I'd still use a function for those ops that don't have stubs in the core. Things like ioctl() could usefully be routed to all the drivers, for example.

1 0

Re: [alsa-devel] [PATCH] ASoC don't clobber platform DMA driver ops
by Mark Brown 01 Nov '11

01 Nov '11

On Tue, Nov 01, 2011 at 06:46:52PM +0000, Tull Alan-R80115 wrote: > This patch creates and populates a ops struct for each call to soc_pcm_new. This isn't very idiomatic - a much more idiomatic solution would be to add new indirection functions which do the lookups. While it's probably not going to make much difference for most things there's operations like ioctl() which definitely don't look at all DMA specific in there.

1 0

[alsa-devel] [PATCH] ASoC don't clobber platform DMA driver ops
by Alan Tull 01 Nov '11

01 Nov '11

Previously, only one static struct for ops existed for all platform DMA drivers to share. Half of the ops are shared functions and the other half are initialized to point directly to ops in the platform driver. This creates problems where each time soc_new_pcm is called, the new platform driver's ops would overwrite a subset of the ops. This patch creates and populates a ops struct for each call to soc_pcm_new. Signed-off-by: Alan Tull <alan.tull(a)freescale.com> --- sound/soc/soc-core.c | 1 + sound/soc/soc-pcm.c | 48 ++++++++++++++++++++++++++++-------------------- 2 files changed, 29 insertions(+), 20 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index b085d8e..1b48fc6 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1547,6 +1547,7 @@ static int soc_cleanup_card_resources(struct snd_soc_card *card) snd_soc_dapm_free(&card->dapm); + kfree(card->rtd->ops); kfree(card->rtd); snd_card_free(card->snd_card); return 0; diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 2879c88..091c074 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -567,17 +567,6 @@ static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream) return offset; } -/* ASoC PCM operations */ -static struct snd_pcm_ops soc_pcm_ops = { - .open = soc_pcm_open, - .close = soc_pcm_close, - .hw_params = soc_pcm_hw_params, - .hw_free = soc_pcm_hw_free, - .prepare = soc_pcm_prepare, - .trigger = soc_pcm_trigger, - .pointer = soc_pcm_pointer, -}; - /* create a new pcm */ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num) { @@ -586,9 +575,17 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num) struct snd_soc_dai *codec_dai = rtd->codec_dai; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_pcm *pcm; + struct snd_pcm_ops *soc_pcm_ops; char new_name[64]; int ret = 0, playback = 0, capture = 0; + /* ASoC PCM operations */ + soc_pcm_ops = kzalloc(sizeof(struct snd_pcm_ops), GFP_KERNEL); + if (soc_pcm_ops == NULL) { + printk(KERN_ERR "asoc: can't create pcm ops for codec %s\n", codec->name); + return -ENOMEM; + } + /* check client and interface hw capabilities */ snprintf(new_name, sizeof(new_name), "%s %s-%d", rtd->dai_link->stream_name, codec_dai->name, num); @@ -603,34 +600,45 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num) num, playback, capture, &pcm); if (ret < 0) { printk(KERN_ERR "asoc: can't create pcm for codec %s\n", codec->name); + kfree(soc_pcm_ops); return ret; } /* DAPM dai link stream work */ INIT_DELAYED_WORK(&rtd->delayed_work, close_delayed_work); + soc_pcm_ops->open = soc_pcm_open; + soc_pcm_ops->close = soc_codec_close; + soc_pcm_ops->hw_params = soc_pcm_hw_params; + soc_pcm_ops->hw_free = soc_pcm_hw_free; + soc_pcm_ops->prepare = soc_pcm_prepare; + soc_pcm_ops->pointer = soc_pcm_pointer; + soc_pcm_ops->trigger = soc_pcm_trigger; + rtd->pcm = pcm; pcm->private_data = rtd; if (platform->driver->ops) { - soc_pcm_ops.mmap = platform->driver->ops->mmap; - soc_pcm_ops.pointer = platform->driver->ops->pointer; - soc_pcm_ops.ioctl = platform->driver->ops->ioctl; - soc_pcm_ops.copy = platform->driver->ops->copy; - soc_pcm_ops.silence = platform->driver->ops->silence; - soc_pcm_ops.ack = platform->driver->ops->ack; - soc_pcm_ops.page = platform->driver->ops->page; + soc_pcm_ops->mmap = platform->driver->ops->mmap; + soc_pcm_ops->ioctl = platform->driver->ops->ioctl; + soc_pcm_ops->copy = platform->driver->ops->copy; + soc_pcm_ops->silence = platform->driver->ops->silence; + soc_pcm_ops->ack = platform->driver->ops->ack; + soc_pcm_ops->page = platform->driver->ops->page; } + rtd->ops = soc_pcm_ops; + if (playback) - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &soc_pcm_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, soc_pcm_ops); if (capture) - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &soc_pcm_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, soc_pcm_ops); if (platform->driver->pcm_new) { ret = platform->driver->pcm_new(rtd); if (ret < 0) { pr_err("asoc: platform pcm constructor failed\n"); + kfree(rtd->ops); return ret; } } -- 1.6.0.4

1 0

[alsa-devel] [PATCH 1/7] ASoC: Ensure WM8962 PLL registers are reset
by Mark Brown 01 Nov '11

01 Nov '11

The WM8962 has a separate software reset for the PLL registers. Ensure that these are reset also on startup. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8962.c | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 8d8b06c..9e2d5b0 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1963,7 +1963,13 @@ static int wm8962_readable_register(struct snd_soc_codec *codec, unsigned int re static int wm8962_reset(struct snd_soc_codec *codec) { - return snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243); + int ret; + + ret = snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243); + if (ret != 0) + return ret; + + return snd_soc_write(codec, WM8962_PLL_SOFTWARE_RESET, 0); } static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0); -- 1.7.7.1

1 6

Re: [alsa-devel] [PATCH] asoc: tegra: wm8903: Simplify pin disconnect
by Mark Brown 01 Nov '11

01 Nov '11

On Tue, Nov 01, 2011 at 09:26:11AM -0700, Taylor Hutt wrote: > (Note that this patch fails the kernel patch checker because > the 'M' macro produces an error that it's value should be enclosed > in parenthesis; this is not actually possible for this use & expansion.) So, this whole patch doesn't look like a Linux patch in either the code itself or the way it's presented. I remember having similar problems before with patches you've submitted but this is even further off the mark than previously. I did start replying in detail but there's so many really basic issues from the coding and patch submission style level up that it was taking too long. In general whenever you're modifying code (kernel or otherwise) if what you're doing doesn't visually resemble the rest of the system there's probably a problem.

1 0

Re: [alsa-devel] [PATCH] asoc: tegra: wm8903: Simplify pin disconnect
by Stephen Warren 01 Nov '11

01 Nov '11

Taylor Hutt wrote at Tuesday, November 01, 2011 10:26 AM: > (Note that this patch fails the kernel patch checker because > the 'M' macro produces an error that it's value should be enclosed > in parenthesis; this is not actually possible for this use & expansion.) > > Detail > > This change is a simplification, both in implementation and for > reasoning about whcih pins are connected and disconnected. > > The impetus for the change was the addition of new boards, and the > difficulty in reasoning about the previous code to disconnect pins. > > Now, unless a connection is specified for the current board, the pin > will be disconnected. > > A follow-on change will add the 'asymptote' board. > > Testing > > Visual inspection from original code. > Built kernel. As I mentioned in the ChromeOS review, I don't like this approach. The main issue is that all the connectivity information is already present in the ${machine}_audio_maps[] arrays, and this change duplicates it all in the data-structures inside tegra_wm8903_disconnect_pins(). Instead, I believe a function should be added to the ASoC core that reads the machine's dapm routes, and does the same thing based on that. Mark Brown pointed out that this should be an optional utility function that machine drivers should call, since applying it automatically might cause issues for some other machines. The second issue here is that the new code calls machine_is_ventana() and the equivalent for other machines, and some of those functions will go away next time Russell updates mach-types and removes entries for boards that aren't supported with an explicit board file. -- nvpublic

1 0