September 2010 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH - Fix Fast Track Ultra series: 44.1/88.1 kHz 1/Fix playback/capture issues and related chrashes at 44100 Hz and 88200 Hz for M-Audio Fast Track Ultra series.
by Felix Homann 03 Sep '10

03 Sep '10

This fixes issues with M-Audio's Fast Track Ultra series: * devices now work at 44100 and 88200 Hz * apparently, fixes some crashes, too This is based on a patch posted by user 'dhubsith' on the M-Audio user forum. Sorry for not sending via 'git send-email': I just don't get it... Kind regards, Felix

5 23

[alsa-devel] [RFC] ASoC: multi-component: Add optional kcontrol prefix name for a DAI link
by Jarkko Nikula 03 Sep '10

03 Sep '10

This optional kcontrol_prefix allows to specify unique prefix for ALSA control names for each DAI link. This makes possible to have a sound card configuration with multiple DAIs and each of them using the same codec driver without name collision. Currently name collision would occur if a codec driver tries to register a kcontrol with a same name for another DAI link. Now it is possible to specify for instance "Front" and "Rear" prefixes and a sound card can have two separate controls like "Front.PCM Playback Volume" and "Rear.PCM Playback Volume". Those controls will then show as "Front.PCM" and "Rear.PCM" in ALSA mixer application. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- include/sound/soc.h | 2 ++ sound/soc/soc-core.c | 13 +++++++++++-- sound/soc/soc-dapm.c | 28 ++++++++++++++++++++++------ 3 files changed, 35 insertions(+), 8 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index d31e8b7..9b83f7e 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -423,6 +423,7 @@ struct snd_soc_ops { /* SoC Audio Codec device */ struct snd_soc_codec { const char *name; + const char *kcontrol_prefix; int id; struct device *dev; struct snd_soc_codec_driver *driver; @@ -539,6 +540,7 @@ struct snd_soc_dai_link { const char *platform_name; /* for multi-platform */ const char *cpu_dai_name; const char *codec_dai_name; + const char *kcontrol_prefix; /* kcontrol prefix for multi-codec */ /* Keep DAI active over suspend */ unsigned int ignore_suspend:1; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a004876..f52eb2a 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1289,6 +1289,7 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) /* config components */ codec_dai->codec = codec; codec->card = card; + codec->kcontrol_prefix = dai_link->kcontrol_prefix; cpu_dai->platform = platform; rtd->card = card; rtd->dev.parent = card->dev; @@ -1903,14 +1904,22 @@ int snd_soc_add_controls(struct snd_soc_codec *codec, const struct snd_kcontrol_new *controls, int num_controls) { struct snd_card *card = codec->card->snd_card; + char prefixed_name[44], *name; int err, i; for (i = 0; i < num_controls; i++) { const struct snd_kcontrol_new *control = &controls[i]; - err = snd_ctl_add(card, snd_soc_cnew(control, codec, NULL)); + if (codec->kcontrol_prefix) { + snprintf(prefixed_name, sizeof(prefixed_name), "%s.%s", + codec->kcontrol_prefix, control->name); + name = prefixed_name; + } else { + name = control->name; + } + err = snd_ctl_add(card, snd_soc_cnew(control, codec, name)); if (err < 0) { dev_err(codec->dev, "%s: Failed to add %s\n", - codec->name, control->name); + codec->name, name); return err; } } diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 035cab8..5751f4f 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -327,6 +327,7 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, int i, ret = 0; size_t name_len; struct snd_soc_dapm_path *path; + char prefix[10]; /* add kcontrol */ for (i = 0; i < w->num_kcontrols; i++) { @@ -347,6 +348,13 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, name_len = strlen(w->kcontrols[i].name) + 1; if (w->id != snd_soc_dapm_mixer_named_ctl) name_len += 1 + strlen(w->name); + if (codec->kcontrol_prefix) { + name_len += 1 + strlen(codec->kcontrol_prefix); + snprintf(prefix, sizeof(prefix), "%s.", + codec->kcontrol_prefix); + } else { + prefix[0] = '\0'; + } path->long_name = kmalloc(name_len, GFP_KERNEL); @@ -355,12 +363,12 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, switch (w->id) { default: - snprintf(path->long_name, name_len, "%s %s", - w->name, w->kcontrols[i].name); + snprintf(path->long_name, name_len, "%s%s %s", + prefix, w->name, w->kcontrols[i].name); break; case snd_soc_dapm_mixer_named_ctl: - snprintf(path->long_name, name_len, "%s", - w->kcontrols[i].name); + snprintf(path->long_name, name_len, "%s%s", + prefix, w->kcontrols[i].name); break; } @@ -388,6 +396,7 @@ static int dapm_new_mux(struct snd_soc_codec *codec, { struct snd_soc_dapm_path *path = NULL; struct snd_kcontrol *kcontrol; + char prefixed_name[44], *name; int ret = 0; if (!w->num_kcontrols) { @@ -395,7 +404,14 @@ static int dapm_new_mux(struct snd_soc_codec *codec, return -EINVAL; } - kcontrol = snd_soc_cnew(&w->kcontrols[0], w, w->name); + if (codec->kcontrol_prefix) { + snprintf(prefixed_name, sizeof(prefixed_name), "%s.%s", + codec->kcontrol_prefix, w->name); + name = prefixed_name; + } else { + name = w->name; + } + kcontrol = snd_soc_cnew(&w->kcontrols[0], w, name); ret = snd_ctl_add(codec->card->snd_card, kcontrol); if (ret < 0) goto err; @@ -406,7 +422,7 @@ static int dapm_new_mux(struct snd_soc_codec *codec, return ret; err: - printk(KERN_ERR "asoc: failed to add kcontrol %s\n", w->name); + printk(KERN_ERR "asoc: failed to add kcontrol %s\n", name); return ret; } -- 1.7.1

3 19

[alsa-devel] [PATCH 11/15] pcmcia: use autoconfiguration feature for ioports and iomem
by Dominik Brodowski 03 Sep '10

03 Sep '10

When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev(a)vger.kernel.org CC: linux-wireless(a)vger.kernel.org CC: linux-ide(a)vger.kernel.org CC: linux-usb(a)vger.kernel.org CC: laforge(a)gnumonks.org CC: linux-mtd(a)lists.infradead.org CC: linux-bluetooth(a)vger.kernel.org CC: alsa-devel(a)alsa-project.org CC: linux-serial(a)vger.kernel.org CC: Jiri Kosina <jkosina(a)suse.cz> CC: linux-scsi(a)vger.kernel.org Signed-off-by: Dominik Brodowski <linux(a)dominikbrodowski.net> --- Documentation/pcmcia/driver-changes.txt | 12 ++ drivers/ata/pata_pcmcia.c | 52 +++------ drivers/bluetooth/bt3c_cs.c | 53 +++++---- drivers/bluetooth/btuart_cs.c | 51 ++++---- drivers/bluetooth/dtl1_cs.c | 18 +-- drivers/char/pcmcia/cm4000_cs.c | 15 +-- drivers/char/pcmcia/cm4040_cs.c | 22 +--- drivers/char/pcmcia/ipwireless/main.c | 26 +--- drivers/char/pcmcia/synclink_cs.c | 16 +-- drivers/ide/ide-cs.c | 53 +++------ drivers/isdn/hardware/avm/avm_cs.c | 19 +--- drivers/isdn/hisax/avma1_cs.c | 22 +--- drivers/isdn/hisax/elsa_cs.c | 23 +--- drivers/isdn/hisax/sedlbauer_cs.c | 38 +----- drivers/isdn/hisax/teles_cs.c | 16 +-- drivers/net/pcmcia/axnet_cs.c | 32 +---- drivers/net/pcmcia/fmvj18x_cs.c | 5 +- drivers/net/pcmcia/pcnet_cs.c | 34 ++---- drivers/net/pcmcia/smc91c92_cs.c | 39 +++---- drivers/net/pcmcia/xirc2ps_cs.c | 69 ++++++----- drivers/net/wireless/airo_cs.c | 34 +----- drivers/net/wireless/atmel_cs.c | 28 +---- drivers/net/wireless/hostap/hostap_cs.c | 43 +------- drivers/net/wireless/libertas/if_cs.c | 16 +-- drivers/net/wireless/orinoco/orinoco_cs.c | 41 +------ drivers/net/wireless/orinoco/spectrum_cs.c | 45 +------- drivers/parport/parport_cs.c | 34 ++---- drivers/pcmcia/pcmcia_cis.c | 77 +++++++++++-- drivers/scsi/pcmcia/aha152x_stub.c | 34 +++--- drivers/scsi/pcmcia/fdomain_stub.c | 13 +-- drivers/scsi/pcmcia/nsp_cs.c | 47 ++------ drivers/scsi/pcmcia/qlogic_stub.c | 13 +-- drivers/scsi/pcmcia/sym53c500_cs.c | 13 +-- drivers/serial/serial_cs.c | 134 +++++++++++----------- drivers/staging/comedi/drivers/cb_das16_cs.c | 31 +---- drivers/staging/comedi/drivers/das08_cs.c | 33 +----- drivers/staging/comedi/drivers/ni_daq_700.c | 32 +----- drivers/staging/comedi/drivers/ni_daq_dio24.c | 32 +----- drivers/staging/comedi/drivers/ni_labpc_cs.c | 32 +----- drivers/staging/comedi/drivers/ni_mio_cs.c | 14 +-- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 32 +----- drivers/telephony/ixj_pcmcia.c | 32 ++---- drivers/usb/host/sl811_cs.c | 28 +---- include/pcmcia/ds.h | 30 ++---- 44 files changed, 503 insertions(+), 980 deletions(-) diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 62a029f..dd04361 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,16 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* pcmcia_loop_config() and autoconfiguration (as of 2.6.36) + If struct pcmcia_device *p_dev->config_flags is set accordingly, + pcmcia_loop_config() now sets up certain configuration values + automatically, though the driver may still override the settings + in the callback function. The following autoconfiguration options + are provided at the moment: + CONF_AUTO_CHECK_VCC : check for matching Vcc + CONF_AUTO_SET_VPP : set Vpp + CONF_AUTO_AUDIO : auto-enable audio line, if required + CONF_AUTO_SET_IO : set ioport resources (->resource[0,1]) + CONF_AUTO_SET_IOMEM : set first iomem resource (->resource[2]) + * pcmcia_request_configuration -> pcmcia_enable_device (as of 2.6.36) pcmcia_request_configuration() got renamed to pcmcia_enable_device(), as it mirrors pcmcia_disable_device(). Configuration settings are now diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 954f43c..eb95ad5 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -172,40 +172,28 @@ struct pcmcia_config_check { int is_kme; }; -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { struct pcmcia_config_check *stk = priv_data; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - pdev->resource[0]->start = io->win[0].base; - if (!(io->flags & CISTPL_IO_16BIT)) { - pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - } - if (io->nwin == 2) { - pdev->resource[0]->end = 8; - pdev->resource[1]->start = io->win[1].base; - pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[1]->start; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->resource[0]->end = io->win[0].len; - pdev->resource[1]->end = 0; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[0]->start + 0x0e; - } else + if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + stk->ctl_base = pdev->resource[1]->start; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; + stk->ctl_base = pdev->resource[0]->start + 0x0e; } - return -ENODEV; + + return pcmcia_request_io(pdev); } /** @@ -228,10 +216,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_port_operations *ops = &pcmcia_port_ops; /* Set up attributes in order to probe card and get resources */ - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - pdev->config_flags |= CONF_ENABLE_IRQ; - pdev->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 97338a3..8b8be35 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -656,10 +656,8 @@ static int bt3c_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_SET_IO; return bt3c_config(link); } @@ -673,38 +671,41 @@ static void bt3c_detach(struct pcmcia_device *link) kfree(info); } -static int bt3c_check_config(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data) { - unsigned long try = (unsigned long) priv_data; - p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + int *try = priv_data; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && - (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + if (try == 0) + p_dev->io_lines = 16; + + if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) + return -EINVAL; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, void *priv_data) { static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 8a6864f..9f9bb69 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -585,10 +585,8 @@ static int btuart_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_SET_IO; return btuart_config(link); } @@ -602,38 +600,41 @@ static void btuart_detach(struct pcmcia_device *link) kfree(info); } -static int btuart_check_config(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int btuart_check_config(struct pcmcia_device *p_dev, void *priv_data) { int *try = priv_data; - p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && - (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + if (try == 0) + p_dev->io_lines = 16; + + if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) + return -EINVAL; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, void *priv_data) { static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 4620cc3..12cd177 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -571,10 +571,7 @@ static int dtl1_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return dtl1_config(link); } @@ -589,17 +586,14 @@ static void dtl1_detach(struct pcmcia_device *link) kfree(info); } -static int dtl1_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data) { - if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8)) + if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8)) return -ENODEV; - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; /*yo */ - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + return pcmcia_request_io(p_dev); } diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 0b2f3b9..79de9cc 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1741,19 +1741,8 @@ static void cmm_cm4000_release(struct pcmcia_device * link) /*==== Interface to PCMCIA Layer =======================================*/ -static int cm4000_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int cm4000_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (!cfg->io.nwin) - return -ENODEV; - - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev); } @@ -1761,6 +1750,8 @@ static int cm4000_config(struct pcmcia_device * link, int devno) { struct cm4000_dev *dev; + link->config_flags |= CONF_AUTO_SET_IO; + /* read the config-tuples */ if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index acf88d5..bf012d2 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -515,25 +515,9 @@ static void cm4040_reader_release(struct pcmcia_device *link) return; } -static int cm4040_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int cm4040_config_check(struct pcmcia_device *p_dev, void *priv_data) { - int rc; - if (!cfg->io.nwin) - return -ENODEV; - - /* Get the IOaddr */ - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - rc = pcmcia_request_io(p_dev); - - dev_printk(KERN_INFO, &p_dev->dev, - "pcmcia_request_io returned 0x%x\n", rc); - return rc; + return pcmcia_request_io(p_dev); } @@ -542,6 +526,8 @@ static int reader_config(struct pcmcia_device *link, int devno) struct reader_dev *dev; int fail_rc; + link->config_flags |= CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 1b7f092..594c23b 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -75,22 +75,18 @@ static void signalled_reboot_callback(void *callback_data) schedule_work(&ipw->work_reboot); } -static int ipwireless_probe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) { struct ipw_dev *ipw = priv_data; struct resource *io_resource; int ret; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; /* 0x40 causes it to generate level mode interrupts. */ /* 0x04 enables IREQ pin. */ - p_dev->config_index = cfg->index | 0x44; + p_dev->config_index |= 0x44; p_dev->io_lines = 16; ret = pcmcia_request_io(p_dev); if (ret) @@ -100,26 +96,18 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, resource_size(p_dev->resource[0]), IPWIRELESS_PCCARD_NAME); - if (cfg->mem.nwin == 0) - return 0; - p_dev->resource[2]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; - p_dev->resource[2]->start = cfg->mem.win[0].host_addr; - p_dev->resource[2]->end = cfg->mem.win[0].len; - if (p_dev->resource[2]->end < 0x1000) - p_dev->resource[2]->end = 0x1000; ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0); if (ret != 0) goto exit1; - ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], - cfg->mem.win[0].card_addr); + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); if (ret != 0) goto exit2; - ipw->is_v2_card = cfg->mem.win[0].len == 0x100; + ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; ipw->attr_memory = ioremap(p_dev->resource[2]->start, resource_size(p_dev->resource[2])); @@ -165,13 +153,13 @@ static int config_ipwireless(struct ipw_dev *ipw) int ret = 0; ipw->is_v2_card = 0; + link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM | + CONF_ENABLE_IRQ; ret = pcmcia_loop_config(link, ipwireless_probe, ipw); if (ret != 0) return ret; - link->config_flags |= CONF_ENABLE_IRQ; - INIT_WORK(&ipw->work_reboot, signalled_reboot_work); ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index c701434..a343b8f 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -561,19 +561,8 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Card has been inserted. */ -static int mgslpc_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { - if (!cfg->io.nwin) - return -ENODEV; - - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev); } @@ -585,11 +574,12 @@ static int mgslpc_config(struct pcmcia_device *link) if (debug_level >= DEBUG_LEVEL_INFO) printk("mgslpc_config(0x%p)\n", link); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL); if (ret != 0) goto failed; - link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 8; link->config_regs = PRESENT_OPTION; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 25b8a10..44a8918 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -96,10 +96,8 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->config_flags |= CONF_ENABLE_IRQ; - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; return ide_config(link); } /* ide_attach */ @@ -199,41 +197,28 @@ struct pcmcia_config_check { int is_kme; }; -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { struct pcmcia_config_check *stk = priv_data; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - pdev->config_index = cfg->index; - pdev->resource[0]->start = io->win[0].base; - if (!(io->flags & CISTPL_IO_16BIT)) { - pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - } - if (io->nwin == 2) { - pdev->resource[0]->end = 8; - pdev->resource[1]->start = io->win[1].base; - pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[1]->start; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->resource[0]->end = io->win[0].len; - pdev->resource[1]->end = 0; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[0]->start + 0x0e; - } else + if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; + stk->ctl_base = pdev->resource[1]->start; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; + stk->ctl_base = pdev->resource[0]->start + 0x0e; } - return -ENODEV; + + return pcmcia_request_io(pdev); } static int ide_config(struct pcmcia_device *link) diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 9dbab9c..403a995 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -72,13 +72,8 @@ static void avmcs_detach(struct pcmcia_device *p_dev); static int avmcs_probe(struct pcmcia_device *p_dev) { - - /* The io structure describes IO port mapping */ - p_dev->resource[0]->end = 16; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - /* General socket configuration */ - p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; p_dev->config_index = 1; p_dev->config_regs = PRESENT_OPTION; @@ -107,16 +102,12 @@ static void avmcs_detach(struct pcmcia_device *link) ======================================================================*/ -static int avmcs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - if (cf->io.nwin <= 0) - return -ENODEV; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; return pcmcia_request_io(p_dev); } diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 2f2b000..cb09f0c 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -76,14 +76,8 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); - /* The io structure describes IO port mapping */ - p_dev->resource[0]->end = 16; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[1]->end = 16; - p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; - /* General socket configuration */ - p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; p_dev->config_index = 1; p_dev->config_regs = PRESENT_OPTION; @@ -114,17 +108,13 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link) ======================================================================*/ -static int avma1cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - if (cf->io.nwin <= 0) - return -ENODEV; - - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->io_lines = 5; + return pcmcia_request_io(p_dev); } diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 0a65280..f203a52 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -118,16 +118,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) local->cardnr = -1; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - return elsa_cs_config(link); } /* elsa_cs_attach */ @@ -160,18 +150,17 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link) ======================================================================*/ -static int elsa_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 3; + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { @@ -194,6 +183,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "elsa_config(0x%p)\n", link); dev = link->priv; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL); if (i != 0) goto failed; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index b69eccf..a88c88f 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -128,8 +128,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) /* from old sedl_cs */ /* The io structure describes IO port mapping */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; return sedlbauer_config(link); } /* sedlbauer_attach */ @@ -161,35 +159,13 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link) device available to the system. ======================================================================*/ -static int sedlbauer_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - p_dev->io_lines = 3; - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - return 0; + p_dev->io_lines = 3; + return pcmcia_request_io(p_dev); } @@ -202,7 +178,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | - CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO; + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; /* In this loop, we scan the CIS for configuration table entries, diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 6605480..05a5631 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -105,10 +105,7 @@ static int __devinit teles_probe(struct pcmcia_device *link) and attributes of IO windows) are fixed by the nature of the device, and can be hard-wired here. */ - link->resource[0]->end = 96; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return teles_cs_config(link); } /* teles_attach */ @@ -142,18 +139,17 @@ static void __devexit teles_detach(struct pcmcia_device *link) ======================================================================*/ -static int teles_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 5; + p_dev->resource[0]->end = 96; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 17f1040..9d9d997 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -284,34 +284,16 @@ static int try_io_port(struct pcmcia_device *link) } } -static int axnet_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - int i; - cistpl_io_t *io = &cfg->io; - - if (cfg->index == 0 || cfg->io.nwin == 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; p_dev->config_index = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) + return -ENODEV; - return -ENODEV; + return try_io_port(p_dev); } static int axnet_config(struct pcmcia_device *link) @@ -324,6 +306,7 @@ static int axnet_config(struct pcmcia_device *link) /* don't trust the CIS on this; Linksys got it wrong */ link->config_regs = 0x63; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (ret != 0) goto failed; @@ -331,7 +314,6 @@ static int axnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - link->config_flags |= CONF_ENABLE_IRQ; if (resource_size(link->resource[1]) == 8) link->config_flags |= CONF_ENABLE_SPKR; diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index c1479e3..792ab38 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -319,10 +319,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) return ret; /* RequestIO failed */ } -static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { return 0; /* strange, but that's what the code did already before... */ } diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 301f3d4..0abf4f8 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -259,7 +259,7 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; dev->netdev_ops = &pcnet_netdev_ops; @@ -500,37 +500,19 @@ static int try_io_port(struct pcmcia_device *link) } } -static int pcnet_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) { int *has_shmem = priv_data; - int i; - cistpl_io_t *io = &cfg->io; - if (cfg->index == 0 || cfg->io.nwin == 0) - return -EINVAL; + *has_shmem = (p_dev->resource[2]->end >= 0x4000); - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } + if (p_dev->config_index == 0) + return -EINVAL; - *has_shmem = ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)); - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); + if (p_dev->resource[0]->end + p_dev->resource[1]->end - 32) + return -EINVAL; - return 0; + return try_io_port(p_dev); } static int pcnet_config(struct pcmcia_device *link) diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index e127d2b..a8cef28 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -323,9 +323,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->config_flags |= CONF_ENABLE_IRQ; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -417,18 +414,21 @@ static int mhz_3288_power(struct pcmcia_device *link) return 0; } -static int mhz_mfc_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->io_lines = 16; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[1]->end = 8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; p_dev->resource[0]->start = k ^ 0x300; - p_dev->io_lines = 16; if (!pcmcia_request_io(p_dev)) return 0; } @@ -442,9 +442,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) unsigned int offset; int i; - link->config_flags |= CONF_ENABLE_SPKR; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->end = 8; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | + CONF_AUTO_SET_IO; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -586,13 +585,12 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ -static int smc_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); } @@ -601,7 +599,8 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->resource[0]->end = 16; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -634,7 +633,7 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->config_flags |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 2bc2eb8..cecc074 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -528,7 +528,6 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; /* Fill in card specific entries */ @@ -665,42 +664,53 @@ has_ce2_string(struct pcmcia_device * p_dev) } static int -xirc2ps_config_modem(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) { unsigned int ioaddr; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = ioaddr; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 16; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } static int -xirc2ps_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) { int *pass = priv_data; + resource_size_t tmp = p_dev->resource[1]->start; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = p_dev->resource[1]->start - + (*pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) + : (p_dev->config_index & 0x20 ? 8 : -24)); + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 18; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[0]->start = tmp; + return pcmcia_request_io(p_dev); } @@ -803,21 +813,16 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->io_lines = 10; if (local->modem) { int pass; + link->config_flags |= CONF_AUTO_SET_IO; - link->resource[1]->end = 8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for @@ -833,7 +838,9 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { + link->io_lines = 10; link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->resource[0]->start = ioaddr; if (!(err = pcmcia_request_io(link))) diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 63bf662..77682f2 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -137,36 +137,12 @@ static void airo_detach(struct pcmcia_device *link) ======================================================================*/ -static int airo_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -180,7 +156,7 @@ static int airo_config(struct pcmcia_device *link) dev_dbg(&link->dev, "airo_config\n"); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | - CONF_AUTO_AUDIO; + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; /* * In this loop, we scan the CIS for configuration table diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 812decd..2029380 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -154,31 +154,11 @@ static int card_present(void *arg) return 0; } -static int atmel_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -194,7 +174,7 @@ static int atmel_config(struct pcmcia_device *link) dev_dbg(&link->dev, "atmel_config\n"); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | - CONF_AUTO_AUDIO; + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; /* In this loop, we scan the CIS for configuration table entries, diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index d4f19af..e57b201 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -469,46 +469,11 @@ static void prism2_detach(struct pcmcia_device *link) /* run after a CARD_INSERTION event is received to configure the PCMCIA * socket and make the device available to the system */ -static int prism2_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt->index); - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt->io.nwin=%d\n", - cfg->io.nwin, dflt->io.nwin); - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -531,7 +496,7 @@ static int prism2_config(struct pcmcia_device *link) /* Look for an appropriate configuration table entry in the CIS */ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | - CONF_AUTO_CHECK_VCC; + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, prism2_config_check, NULL); diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 031f3e6..2c6f28a 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -794,20 +794,12 @@ static void if_cs_release(struct pcmcia_device *p_dev) * insertion event. */ -static int if_cs_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - if (cfg->io.nwin != 1) { + if (p_dev->resource[1]->end) { lbs_pr_err("wrong CIS (check number of IO windows)\n"); return -ENODEV; } @@ -833,6 +825,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index b921738..263dfe9 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -142,42 +142,12 @@ static void orinoco_cs_detach(struct pcmcia_device *link) * device available to the system. */ -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -202,7 +172,8 @@ orinoco_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index f462c78..7844650 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -205,48 +205,12 @@ static void spectrum_cs_detach(struct pcmcia_device *link) */ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -271,7 +235,8 @@ spectrum_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 8c2a473..3730184 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -100,9 +100,7 @@ static int parport_probe(struct pcmcia_device *link) link->priv = info; info->p_dev = link; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return parport_config(link); } /* parport_attach */ @@ -133,27 +131,14 @@ static void parport_detach(struct pcmcia_device *link) ======================================================================*/ -static int parport_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (epp_mode) - p_dev->config_index |= FORCE_EPP_MODE; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin == 2) { - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - return 0; - } - return -ENODEV; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int parport_config(struct pcmcia_device *link) @@ -164,6 +149,9 @@ static int parport_config(struct pcmcia_device *link) dev_dbg(&link->dev, "parport_config\n"); + if (epp_mode) + link->config_index |= FORCE_EPP_MODE; + ret = pcmcia_loop_config(link, parport_config_check, NULL); if (ret) goto failed; diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index d3f8d47..9745c01 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -6,7 +6,7 @@ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. * * Copyright (C) 1999 David A. Hinds - * Copyright (C) 2004-2009 Dominik Brodowski + * Copyright (C) 2004-2010 Dominik Brodowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -125,13 +125,24 @@ next_entry: return ret; } + +/** + * pcmcia_io_cfg_data_width() - convert cfgtable to data path width parameter + */ +static int pcmcia_io_cfg_data_width(unsigned int flags) +{ + if (!(flags & CISTPL_IO_8BIT)) + return IO_DATA_PATH_WIDTH_16; + if (!(flags & CISTPL_IO_16BIT)) + return IO_DATA_PATH_WIDTH_8; + return IO_DATA_PATH_WIDTH_AUTO; +} + + struct pcmcia_cfg_mem { struct pcmcia_device *p_dev; + int (*conf_check) (struct pcmcia_device *p_dev, void *priv_data); void *priv_data; - int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data); cisparse_t parse; cistpl_cftable_entry_t dflt; }; @@ -184,16 +195,62 @@ static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) if ((flags & CONF_AUTO_AUDIO) && (cfg->flags & CISTPL_CFTABLE_AUDIO)) p_dev->config_flags |= CONF_ENABLE_SPKR; - return cfg_mem->conf_check(cfg_mem->p_dev, cfg, &cfg_mem->dflt, - cfg_mem->priv_data); + + /* IO window settings? */ + if (flags & CONF_AUTO_SET_IO) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + int i = 0; + + p_dev->resource[0]->start = p_dev->resource[0]->end = 0; + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + if (io->nwin == 0) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + if (io->nwin > 1) { + /* For multifunction cards, by convention, we + * configure the network function with window 0, + * and serial with window 1 */ + i = (io->win[1].len > io->win[0].len); + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; + } + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + } + + /* MEM window settings? */ + if (flags & CONF_AUTO_SET_IOMEM) { + /* so far, we only set one memory window */ + cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + + p_dev->resource[2]->start = p_dev->resource[2]->end = 0; + if (mem->nwin == 0) + return -ENODEV; + + p_dev->resource[2]->start = mem->win[0].host_addr; + p_dev->resource[2]->end = mem->win[0].len; + if (p_dev->resource[2]->end < 0x1000) + p_dev->resource[2]->end = 0x1000; + p_dev->card_addr = mem->win[0].card_addr; + } + + dev_dbg(&p_dev->dev, "checking configuration %d: %pR %pR %pR\n", + p_dev->config_index, p_dev->resource[0], p_dev->resource[1], + p_dev->resource[2]); + + return cfg_mem->conf_check(p_dev, cfg_mem->priv_data); } /** * pcmcia_loop_config() - loop over configuration options * @p_dev: the struct pcmcia_device which we need to loop for. * @conf_check: function to call for each configuration option. - * It gets passed the struct pcmcia_device, the CIS data - * describing the configuration option, and private data + * It gets passed the struct pcmcia_device and private data * being passed to pcmcia_loop_config() * @priv_data: private data to be passed to the conf_check function. * @@ -203,8 +260,6 @@ static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) */ int pcmcia_loop_config(struct pcmcia_device *p_dev, int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data), void *priv_data) { diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 0b5fc2f..bd9ce09 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -99,9 +99,7 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->end = 0x20; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; link->config_regs = PRESENT_OPTION; return aha152x_config_cs(link); @@ -121,24 +119,24 @@ static void aha152x_detach(struct pcmcia_device *link) /*====================================================================*/ -static int aha152x_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int aha152x_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; + /* For New Media T&J, look for a SCSI window */ - if (cfg->io.win[0].len >= 0x20) - p_dev->resource[0]->start = cfg->io.win[0].base; - else if ((cfg->io.nwin > 1) && - (cfg->io.win[1].len >= 0x20)) - p_dev->resource[0]->start = cfg->io.win[1].base; - if ((cfg->io.nwin > 0) && - (p_dev->resource[0]->start < 0xffff)) { - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -EINVAL; + if ((p_dev->resource[0]->end < 0x20) && + (p_dev->resource[1]->end >= 0x20)) + p_dev->resource[0]->start = p_dev->resource[1]->start; + + if (p_dev->resource[0]->start >= 0xffff) + return -EINVAL; + + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + p_dev->resource[0]->end = 0x20; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + + return pcmcia_request_io(p_dev); } static int aha152x_config_cs(struct pcmcia_device *link) diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 3b9f311..f2dc627 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -82,9 +82,7 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->end = 0x10; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; link->config_regs = PRESENT_OPTION; return fdomain_config(link); @@ -103,13 +101,12 @@ static void fdomain_detach(struct pcmcia_device *link) /*====================================================================*/ -static int fdomain_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = 0x10; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; return pcmcia_request_io(p_dev); } diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 9b4ac20..3d6db73 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1556,13 +1556,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); - /* The io structure describes IO port mapping */ - link->resource[0]->end = 0x10; - link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; - - /* General socket configuration */ - link->config_flags |= CONF_ENABLE_IRQ; - ret = nsp_cs_config(link); nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); @@ -1594,50 +1587,27 @@ static void nsp_cs_detach(struct pcmcia_device *link) ethernet device available to the system. ======================================================================*/ -static int nsp_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { struct nsp_hw_data *data = priv_data; if (cfg->index == 0) return -ENODEV; - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev) != 0) + goto next_entry; - if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + if (resource_size(p_dev->resource[2])) { p_dev->resource[2]->flags |= (WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE); - p_dev->resource[2]->start = mem->win[0].host_addr; - p_dev->resource[2]->end = mem->win[0].len; if (p_dev->resource[2]->end < 0x1000) p_dev->resource[2]->end = 0x1000; if (pcmcia_request_window(p_dev, p_dev->resource[2], 0) != 0) goto next_entry; if (pcmcia_map_mem_page(p_dev, p_dev->resource[2], - mem->win[0].card_addr) != 0) + p_dev->card_addr) != 0) goto next_entry; data->MmioAddress = (unsigned long) @@ -1664,7 +1634,8 @@ static int nsp_cs_config(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "in"); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | - CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO; + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, nsp_cs_config_check, data); if (ret) @@ -1727,7 +1698,7 @@ static int nsp_cs_config(struct pcmcia_device *link) printk(", io %pR", link->resource[0]); if (link->resource[1]) printk(" & %pR", link->resource[1]); - if (link->resource[1]) + if (link->resource[2]) printk(", mem %pR", link->resource[2]); printk("\n"); diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 468fd12..e8a06e3 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -155,9 +155,7 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; link->config_regs = PRESENT_OPTION; return qlogic_config(link); @@ -176,14 +174,11 @@ static void qlogic_detach(struct pcmcia_device *link) /*====================================================================*/ -static int qlogic_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; if (p_dev->resource[0]->start == 0) return -ENODEV; diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 7a0bb9a..6ceb57c 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -683,14 +683,11 @@ static struct scsi_host_template sym53c500_driver_template = { .shost_attrs = SYM53C500_shost_attrs }; -static int SYM53C500_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int SYM53C500_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; if (p_dev->resource[0]->start == 0) return -ENODEV; @@ -857,9 +854,7 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return SYM53C500_config(link); } /* SYM53C500_attach */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 57e042b..b272443 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -332,7 +332,7 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; if (do_sound) link->config_flags |= CONF_ENABLE_SPKR; @@ -403,41 +403,45 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, /*====================================================================*/ -static int simple_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) { static const int size_table[2] = { 8, 16 }; int *try = priv_data; - p_dev->io_lines = ((*try & 0x1) == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->start == 0) + return -ENODEV; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) - && (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -EINVAL; + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; + + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int simple_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, void *priv_data) { static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -465,12 +469,9 @@ static int simple_config(struct pcmcia_device *link) } } - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - /* First pass: look for a config entry that looks normal. * Two tries: without IO aliases, then with aliases */ - link->config_flags |= CONF_AUTO_SET_VPP; + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; for (try = 0; try < 4; try++) if (!pcmcia_loop_config(link, simple_config_check, &try)) goto found_port; @@ -501,43 +502,44 @@ found_port: return setup_serial(link, info, link->resource[0]->start, link->irq); } -static int multi_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) { - int *base2 = priv_data; + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; /* The quad port cards have bad CIS's, so just look for a window larger than 8 ports and assume it will be right */ - if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[0]->start + 8; - return 0; - } - } - return -ENODEV; + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; } static int multi_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, void *priv_data) { int *base2 = priv_data; - if (cf->io.nwin == 2) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[1]->start = cf->io.win[1].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[1]->start; - return 0; - } - } - return -ENODEV; + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; } static int multi_config(struct pcmcia_device *link) @@ -545,12 +547,12 @@ static int multi_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i, base2 = 0; + link->config_flags |= CONF_AUTO_SET_IO; /* First, look for a generic full-sized window */ - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = info->multi * 8; - if (pcmcia_loop_config(link, multi_config_check, &base2)) { + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { /* If that didn't work, look for two windows */ - link->resource[0]->end = link->resource[1]->end = 8; info->multi = 2; if (pcmcia_loop_config(link, multi_config_check_notpicky, &base2)) { @@ -586,7 +588,7 @@ static int multi_config(struct pcmcia_device *link) link->config_index == 3) { err = setup_serial(link, info, base2, link->irq); - base2 = link->resource[0]->start;; + base2 = link->resource[0]->start; } else { err = setup_serial(link, info, link->resource[0]->start, link->irq); @@ -610,18 +612,18 @@ static int multi_config(struct pcmcia_device *link) return 0; } -static int serial_check_for_multi(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) { struct serial_info *info = p_dev->priv; - if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) - info->multi = cf->io.win[0].len >> 3; + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; - if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && - (cf->io.win[1].len == 8)) + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) info->multi = 2; return 0; /* break */ diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 678fbf6..c43c689 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -710,36 +710,12 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link) static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data) { - if (cfg->index == 0) + if (p_dev->config_index == 0) return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - - return 0; + return pcmcia_request_io(p_dev); } static void das16cs_pcmcia_config(struct pcmcia_device *link) @@ -748,6 +724,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das16cs_pcmcia_config\n"); + /* Do we need to allocate an interrupt? */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 12a96b7..d395909 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -192,35 +192,12 @@ static void das08_pcmcia_detach(struct pcmcia_device *link) static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - return 0; + if (p_dev->config_index == 0) + return -EINVAL; + + return pcmcia_request_io(p_dev); } @@ -238,6 +215,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das08_pcmcia_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index f22dc0f..7129b0c 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -530,35 +530,12 @@ static void dio700_cs_detach(struct pcmcia_device *link) ======================================================================*/ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio700_config(struct pcmcia_device *link) @@ -570,7 +547,8 @@ static void dio700_config(struct pcmcia_device *link) dev_dbg(&link->dev, "dio700_config\n"); - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL); if (ret) { diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 6dc2b06..4defdda 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -282,35 +282,12 @@ static void dio24_cs_detach(struct pcmcia_device *link) ======================================================================*/ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio24_config(struct pcmcia_device *link) @@ -321,7 +298,8 @@ static void dio24_config(struct pcmcia_device *link) dev_dbg(&link->dev, "dio24_config\n"); - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL); if (ret) { diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 6eacbd7..5123b31 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -261,35 +261,12 @@ static void labpc_cs_detach(struct pcmcia_device *link) ======================================================================*/ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -300,7 +277,7 @@ static void labpc_config(struct pcmcia_device *link) dev_dbg(&link->dev, "labpc_config\n"); link->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ | - CONF_AUTO_AUDIO; + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL); if (ret) { @@ -316,7 +293,6 @@ static void labpc_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index da4e2a2..f1e31d3 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -262,10 +262,6 @@ static struct pcmcia_device *cur_dev = NULL; static int cs_attach(struct pcmcia_device *link) { - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->resource[0]->end = 16; - link->config_flags |= CONF_ENABLE_IRQ; - cur_dev = link; mio_cs_config(link); @@ -299,15 +295,12 @@ static int mio_cs_resume(struct pcmcia_device *link) } -static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { int base, ret; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (base = 0x000; base < 0x400; base += 0x20) { p_dev->resource[0]->start = base; @@ -324,6 +317,7 @@ static void mio_cs_config(struct pcmcia_device *link) int ret; DPRINTK("mio_cs_config(link=%p)\n", link); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL); if (ret) { diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 03a72d7..afd283d 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1068,35 +1068,11 @@ static void daqp_cs_detach(struct pcmcia_device *link) ======================================================================*/ -static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->config_flags |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -1106,6 +1082,8 @@ static void daqp_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "daqp_cs_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index 670a76b..76edd39 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -31,8 +31,6 @@ static int ixj_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "ixj_attach()\n"); /* Create new ixj device */ - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL); if (!p_dev->priv) { return -ENOMEM; @@ -109,36 +107,28 @@ failed: return; } -static int ixj_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int ixj_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - p_dev->io_lines = 3; - if (io->nwin == 2) { - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 3; + + return pcmcia_request_io(p_dev); } static int ixj_config(struct pcmcia_device * link) { IXJ *j; ixj_info_t *info; - cistpl_cftable_entry_t dflt = { 0 }; info = link->priv; dev_dbg(&link->dev, "ixj_config\n"); - if (pcmcia_loop_config(link, ixj_config_check, &dflt)) + link->config_flags = CONF_AUTO_SET_IO; + + if (pcmcia_loop_config(link, ixj_config_check, NULL)) goto failed; if (pcmcia_enable_device(link)) diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index d960629..81d7eea 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -131,28 +131,12 @@ static void sl811_cs_release(struct pcmcia_device * link) platform_device_unregister(&platform_dev); } -static int sl811_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - void *priv_data) +static int sl811_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - - return pcmcia_request_io(p_dev); - } - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); } @@ -164,7 +148,7 @@ static int sl811_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "sl811_cs_config\n"); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | - CONF_AUTO_CHECK_VCC; + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO; if (pcmcia_loop_config(link, sl811_cs_config_check, NULL)) goto failed; diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 0577e5f..0b8c8d4 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -93,6 +93,7 @@ struct pcmcia_device { /* device setup */ unsigned int irq; struct resource *resource[PCMCIA_NUM_RESOURCES]; + resource_size_t card_addr; /* for the 1st IOMEM resource */ unsigned int vpp; unsigned int config_flags; /* CONF_ENABLE_ flags below */ @@ -175,8 +176,6 @@ int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse); /* loop CIS entries for valid configuration */ int pcmcia_loop_config(struct pcmcia_device *p_dev, int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, void *priv_data), void *priv_data); @@ -225,16 +224,6 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev); #define IO_DATA_PATH_WIDTH_16 0x08 #define IO_DATA_PATH_WIDTH_AUTO 0x10 -/* convert flag found in cfgtable to data path width parameter */ -static inline int pcmcia_io_cfg_data_width(unsigned int flags) -{ - if (!(flags & CISTPL_IO_8BIT)) - return IO_DATA_PATH_WIDTH_16; - if (!(flags & CISTPL_IO_16BIT)) - return IO_DATA_PATH_WIDTH_8; - return IO_DATA_PATH_WIDTH_AUTO; -} - /* IO memory */ #define WIN_MEMORY_TYPE_CM 0x00 /* default */ #define WIN_MEMORY_TYPE_AM 0x20 /* MAP_ATTRIB */ @@ -264,16 +253,17 @@ static inline int pcmcia_io_cfg_data_width(unsigned int flags) #define PRESENT_IOSIZE 0x200 /* flags to be passed to pcmcia_enable_device() */ -#define CONF_ENABLE_IRQ 0x01 -#define CONF_ENABLE_SPKR 0x02 -#define CONF_ENABLE_PULSE_IRQ 0x04 -#define CONF_ENABLE_ESR 0x08 +#define CONF_ENABLE_IRQ 0x0001 +#define CONF_ENABLE_SPKR 0x0002 +#define CONF_ENABLE_PULSE_IRQ 0x0004 +#define CONF_ENABLE_ESR 0x0008 /* flags used by pcmcia_loop_config() autoconfiguration */ -#define CONF_AUTO_CHECK_VCC 0x10 /* check for matching Vcc? */ -#define CONF_AUTO_SET_VPP 0x20 /* set Vpp? */ -#define CONF_AUTO_AUDIO 0x40 /* enable audio line? */ - +#define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */ +#define CONF_AUTO_SET_VPP 0x0200 /* set Vpp? */ +#define CONF_AUTO_AUDIO 0x0400 /* enable audio line? */ +#define CONF_AUTO_SET_IO 0x0800 /* set ->resource[0,1] */ +#define CONF_AUTO_SET_IOMEM 0x1000 /* set ->resource[2] */ #endif /* __KERNEL__ */ -- 1.7.0.4

1 0

[alsa-devel] [PATCH] ASoC: ak4642: Revive ak4642_snd_controls
by Kuninori Morimoto 03 Sep '10

03 Sep '10

This patch revive ak4642_snd_controls which was removed on f0fba2ad1b6b53d5360125c41953b7afcd6deff0 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/codecs/ak4642.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index 31b35e9..c84cc9c 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -424,6 +424,8 @@ static int ak4642_probe(struct snd_soc_codec *codec) codec->hw_write = (hw_write_t)i2c_master_send; codec->control_data = ak4642->control_data; + snd_soc_add_controls(codec, ak4642_snd_controls, + ARRAY_SIZE(ak4642_snd_controls)); return 0; } -- 1.7.0.4

3 2

Re: [alsa-devel] HCTL element callback
by Camilo Polymeris 03 Sep '10

03 Sep '10

On Fri, 2010-09-03 at 09:16 +0200, Jaroslav Kysela wrote: > On Fri, 3 Sep 2010, Camilo Polymeris wrote: > > > On Fri, 2010-09-03 at 08:35 +0200, Jaroslav Kysela wrote: > >> On Thu, 2 Sep 2010, Camilo Polymeris wrote: > >> > >>> Hello. > >>> I am writing this mixer app: > >>> http://emutrix.googlecode.com > >>> > >>> I have trouble with callbacks. So far I have implemented callbacks for > >>> the master volume fader and clock rate selection (integer and enum, > >>> resp.) > >>> But "pad" callbacks (boolean) won't work. In fact, I have noticed that > >>> alsamixer 1.0.22 also doesn't react to pad changes from the application. > >>> But the driver reacts to both as expected, so we're dealing with the > >>> same element. > >> > >> It seems like a bug in the emu driver. The elem put callbacks does not > >> check for changes (they should return 1). > >> > >> Does this patch help? > >> > >> diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c > >> index 05afe06..7bd1c1a 100644 > >> --- a/sound/pci/emu10k1/emumixer.c > >> +++ b/sound/pci/emu10k1/emumixer.c > >> @@ -622,6 +622,7 @@ static int snd_emu1010_adc_pads_put(struct snd_kcontrol *kcontrol, struct snd_ct > >> if (cache != emu->emu1010.adc_pads) { > >> snd_emu1010_fpga_write(emu, EMU_HANA_ADC_PADS, cache ); > >> emu->emu1010.adc_pads = cache; > >> + return 1; > >> } > >> > >> return 0; > >> @@ -670,6 +671,7 @@ static int snd_emu1010_dac_pads_put(struct snd_kcontrol *kcontrol, struct snd_ct > >> if (cache != emu->emu1010.dac_pads) { > >> snd_emu1010_fpga_write(emu, EMU_HANA_DAC_PADS, cache ); > >> emu->emu1010.dac_pads = cache; > >> + return 1; > >> } > >> > >> return 0; > >> > >> Jaroslav > >> > >> ----- > >> Jaroslav Kysela <perex(a)perex.cz> > >> Linux Kernel Sound Maintainer > >> ALSA Project, Red Hat, Inc. > >> > > > > > > Hello. > > I think it doesn't help. I applied the patch, built the sources, > > installed them (with 'make install') and reloaded alsa (with 'alsa > > reload'). That should have installed the new module, right? > > If so, the patch didn't help. I am not very experienced with kernel > > stuff, so if I did something wrong, please tell me and I'll try again. > > Reboot your machine at first to ensure that you have loaded new ALSA > kernel modules. > > Jaroslav > > ----- > Jaroslav Kysela <perex(a)perex.cz> > Linux Kernel Sound Maintainer > ALSA Project, Red Hat, Inc. > Very nice. That worked. Thanks! By the way, I have noticed two small errors (I think) with element names: * Pads are labeled 14dB, but they are actually ~12dB (intended as -10dBV/+4dBu) * Enum items (inputs) are labeled 0202 SPDIF Left/Right, but the connector is on the 1010 card. The outputs are ok. Are you keeping those for backwards-compatibility? Again, thanks. Camilo

2 1

[alsa-devel] [RESENT] [PATCH - Fix Fast Track Ultra series: 44.1/88.1 kHz 1/Fix playback/capture issues and related chrashes at 44100 Hz and 88200 Hz for M-Audio Fast Track Ultra series.
by Garnet MacPhee 03 Sep '10

03 Sep '10

Clemens Ladisch wrote: > I've got several reports that devices no longer work since UAC2 support got > added. But I've just noticed this is not related to the interface class > but to the interface protocol: the new code added checks for UAC_VERSION_1 > or _2, but real devices apparently write just random junk into this field. > (For vendor-specific interfaces, they are actually justified to do so.) > We need something like the following (untested), unless you have a better > idea: I retro-fitted Clemens' patch to kernel 2.6.35 and tested it. There is a problem in card.c and endpoint.c in that KERN_WARN needs to be KERN_WARNING, but otherwise the patch works. I get this in dmesg: ALSA sound/usb/endpoint.c:279: 2:1:1: unknown interface protocol 0xff, assuming v1 ALSA sound/usb/endpoint.c:439: 2:1:1: add audio endpoint 0x1 ALSA sound/usb/endpoint.c:279: 2:2:1: unknown interface protocol 0xff, assuming v1 ALSA sound/usb/endpoint.c:439: 2:2:1: add audio endpoint 0x81 ALSA sound/usb/endpoint.c:279: 2:2:2: unknown interface protocol 0xff, assuming v1 ALSA sound/usb/endpoint.c:439: 2:2:2: add audio endpoint 0x81 ALSA sound/usb/clock.c:243: current rate 48000 is different from the runtime rate 96000 It is still necessary to have the following bit of code in endpoint.c, otherwise sample rates of 44100 or 88200 do not work (the original problem). I think there should be a standard name instead of using 0x09, something like UAC_EP_CS_ATTR_ADAPTIVE, this would have to be defined somewhere. diff -rupN /sound/usb/endpoint.c /sound/usb/endpoint.c --- /sound/usb/endpoint.c +++ /sound/usb/endpoint.c @@ -403,11 +405,15 @@ int snd_usb_parse_audio_endpoints(struct break; case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */ case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ - case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra 8 */ - case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */ /* doesn't set the sample rate attribute, but supports it */ fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE; break; + case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */ + case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */ + /* force playback sync to adaptive only and turn off async*/ + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + fp->ep_attr = 0x09; + break; case USB_ID(0x047f, 0x0ca1): /* plantronics headset */ case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is an older model 77d:223) */

2 1

[alsa-devel] HCTL element callback
by Camilo Polymeris 03 Sep '10

03 Sep '10

Hello. I am writing this mixer app: http://emutrix.googlecode.com I have trouble with callbacks. So far I have implemented callbacks for the master volume fader and clock rate selection (integer and enum, resp.) But "pad" callbacks (boolean) won't work. In fact, I have noticed that alsamixer 1.0.22 also doesn't react to pad changes from the application. But the driver reacts to both as expected, so we're dealing with the same element. I set callbacks with this: snd_hctl_elem_set_callback(el, cb); And periodically poll them with: if (snd_hctl_wait(hctl, 10)) snd_hctl_handle_events(hctl); As I said, integers and enums I have tried so far, work. Thanks for any help, Camilo

2 2

[alsa-devel] [PATCH] ALSA: HDA: Fix front mic on Dell Precision M6500
by David Henningsson 03 Sep '10

03 Sep '10

The BIOS of Dell Precision M6500 lists both 0x0e and 0x11 as front mics, and the driver only supports one front mic. This commit adds a quirk for preferring node 0x11 (internal mic) to node 0x0e (possibly docking station mic). Alsa-info reference: http://launchpadlibrarian.net/54232083/alsa-info.txt.xyFVpIysHt -- David Henningsson, Canonical Ltd. http://launchpad.net/~diwic

4 11

[alsa-devel] Question about i.Mx27 + wm8974: lots of noise
by Jie Jiang 02 Sep '10

02 Sep '10

Hi all, I have been developing alsa driver for wm8974 + i.MX27.By now, the playback channel works well. But there is lots of noise in my record file. The input audio is from aux input. I have configured wm8974 so that ONLY the aux input goes into ADC. (The INPPGAMUTE bit is 1 and the MICP2BOOSTVOL is 0.) And I have enabled the Speaker Line Bypass switch so that I can verify that the aux input is correct and the bypass output is very clear. That means that there is nothing wrong with the ADC input. But the wav file (generated by command "arecord -d 20 -c 1 -f S16_LE -r 8000 -t wav foobar.wav") contains both the aux input audio and lots of noise, which makes the quality of the record file even unacceptable. Since the playback works well, the register setting of wm8974 and mx27 ssi seems to be correct. What's the possible reason causing so much noise? Can the digital filers of ADC be helpful to eliminate recording noise and improve the quality of record file? Regards, Jie

1 0

[alsa-devel] [PATCH 2/4] sound/soc/fsl/p1022_ds.c: Add of_node_put to avoid memory leak
by Julia Lawall 02 Sep '10

02 Sep '10

Add a call to of_node_put in the error handling code following a call to of_parse_phandle. This patch also moves the existing call to of_node_put tothe end of the error handling code, to make it possible to jump to of_node_put without doing the other cleanup operations. These appear to be disjoint operations, so the ordering doesn't matter. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1,E2; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node |of_find_node_by_type |of_find_node_with_property |of_find_matching_node |of_parse_phandle )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> ( E2 = x; | of_node_put(x); ) // </smpl> Signed-off-by: Julia Lawall <julia(a)diku.dk> --- sound/soc/fsl/p1022_ds.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c index f8176e8..63b9eaa 100644 --- a/sound/soc/fsl/p1022_ds.c +++ b/sound/soc/fsl/p1022_ds.c @@ -346,8 +346,10 @@ static int p1022_ds_probe(struct platform_device *pdev) } mdata = kzalloc(sizeof(struct machine_data), GFP_KERNEL); - if (!mdata) - return -ENOMEM; + if (!mdata) { + ret = -ENOMEM; + goto error_put; + } mdata->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); mdata->dai[0].ops = &p1022_ds_ops; @@ -502,13 +504,12 @@ static int p1022_ds_probe(struct platform_device *pdev) return 0; error: - of_node_put(codec_np); - if (sound_device) platform_device_unregister(sound_device); kfree(mdata); - +error_put: + of_node_put(codec_np); return ret; }

4 4