September 2010 - Alsa-devel - mailman.alsa-project.org

Re: [alsa-devel] Microphone not working on PCI ID 8086:3b56
by Jeff Chua 28 Sep '10

28 Sep '10

On Tue, Sep 28, 2010 at 2:18 AM, Takashi Iwai <tiwai(a)suse.de> wrote: > At Tue, 28 Sep 2010 01:56:44 +0800, > Jeff Chua wrote: >> >> On Mon, Sep 27, 2010 at 10:42 PM, Takashi Iwai <tiwai(a)suse.de> wrote: >> > At Wed, 15 Sep 2010 06:32:22 +0800 (SGT), >> > Did you try to play with model option for snd-hda-intel driver? >> > For example, model=lenovo-x200 ? >> >> Didn't know there's such option. But I'll try it now. Is there an >> option to if the driver is not compiled as a module? > > Yes, you can pass via a boot option like MODULENAME.OPTIONNAME=xxx,yyy,... > In this case, snd-hda-intel.model=lenovo-x200 Tried, still no mic. Perhaps I'm not using the right driver. Which one should I enable? CONFIG_SND_HDA_CODEC_CONEXANT CONFIG_SND_HDA_CODEC_INTELHDMI CONFIG_SND_HDA_CODEC_REALTEK Thanks, Jeff

3 2

Re: [alsa-devel] [RFC v5]update broken web addresses in the kernel.
by Finn Thain 28 Sep '10

28 Sep '10

Looks good to me. Finn On Mon, 27 Sep 2010, Justin P. Mattock wrote: > Below is an updated patch to fix broken web addresses in the kernel. > Please let me know if I missed anything, and I'll go back and fix it. > and lastly Thanks for all the help with this... > > Signed-off-by: Justin P. Mattock <justinmattock(a)gmail.com> > Cc: Maciej W. Rozycki <macro(a)linux-mips.org> > Cc: Geert Uytterhoeven <geert(a)linux-m68k.org> > Cc: Finn Thain <fthain(a)telegraphics.com.au> > Cc: Randy Dunlap <rdunlap(a)xenotime.net> > Cc: Matt Turner <mattst88(a)gmail.com> > Cc: Dimitry Torokhov <dmitry.torokhov(a)gmail.com> > Cc: Mike Frysinger <vapier.adi(a)gmail.com> > Acked-by: Ben Pfaff <blp(a)cs.stanford.edu> > Acked-by: Hans J. Koch <hjk(a)linutronix.de> > > --- > drivers/ata/pata_it821x.c | 4 ++-- > drivers/atm/Kconfig | 2 +- > drivers/char/agp/Kconfig | 2 +- > drivers/char/agp/i460-agp.c | 2 +- > drivers/char/apm-emulation.c | 4 ++-- > drivers/char/ipmi/ipmi_bt_sm.c | 2 +- > drivers/char/ipmi/ipmi_si_intf.c | 3 +-- > drivers/char/n_r3964.c | 1 - > drivers/char/pcmcia/Kconfig | 4 ++-- > drivers/char/tpm/Kconfig | 2 +- > drivers/char/tpm/tpm_infineon.c | 2 +- > drivers/edac/edac_device_sysfs.c | 2 +- > drivers/edac/i82443bxgx_edac.c | 2 +- > drivers/firmware/Kconfig | 4 ++-- > drivers/firmware/edd.c | 2 +- > drivers/firmware/pcdp.h | 4 ++-- > drivers/gpu/drm/drm_modes.c | 2 +- > drivers/hwmon/adm1025.c | 2 +- > drivers/hwmon/adm1026.c | 2 +- > drivers/hwmon/f75375s.c | 4 ++-- > drivers/hwmon/g760a.c | 2 +- > drivers/hwmon/hwmon-vid.c | 2 +- > drivers/ide/hpt366.c | 2 +- > drivers/ide/ht6560b.c | 1 - > drivers/infiniband/Kconfig | 4 ++-- > drivers/infiniband/hw/cxgb3/Kconfig | 2 +- > drivers/infiniband/hw/cxgb4/Kconfig | 2 +- > drivers/infiniband/ulp/iser/Kconfig | 2 +- > drivers/input/joystick/gamecon.c | 3 +-- > drivers/input/misc/cm109.c | 2 +- > drivers/input/mouse/Kconfig | 1 + > drivers/input/mouse/touchkit_ps2.c | 4 ++-- > drivers/input/touchscreen/mk712.c | 2 +- > drivers/isdn/i4l/isdn_audio.c | 2 +- > drivers/macintosh/therm_adt746x.c | 6 +++--- > drivers/media/IR/keymaps/rc-manli.c | 1 - > drivers/media/dvb/ttpci/av7110.c | 10 ++-------- > drivers/media/dvb/ttpci/av7110_av.c | 2 +- > drivers/media/dvb/ttpci/av7110_ca.c | 2 +- > drivers/media/dvb/ttpci/av7110_hw.c | 2 +- > drivers/media/dvb/ttpci/av7110_v4l.c | 2 +- > drivers/media/dvb/ttpci/budget-av.c | 2 +- > drivers/media/dvb/ttpci/budget-ci.c | 2 +- > drivers/media/dvb/ttpci/budget-core.c | 2 +- > drivers/media/dvb/ttpci/budget-patch.c | 2 +- > drivers/media/dvb/ttpci/budget.c | 2 +- > drivers/media/radio/radio-maxiradio.c | 2 +- > drivers/media/radio/radio-typhoon.c | 2 -- > drivers/media/video/Kconfig | 2 +- > drivers/media/video/cafe_ccic.c | 2 +- > drivers/media/video/cx18/cx18-cards.c | 2 +- > drivers/media/video/cx23885/cx23885-417.c | 2 +- > drivers/media/video/cx88/cx88-blackbird.c | 2 +- > drivers/media/video/ivtv/ivtv-cards.c | 2 +- > drivers/media/video/mxb.c | 2 +- > drivers/media/video/sn9c102/sn9c102_pas202bcb.c | 1 - > drivers/misc/Kconfig | 4 ++-- > drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- > drivers/mtd/devices/lart.c | 2 +- > drivers/mtd/ftl.c | 2 +- > drivers/mtd/maps/Kconfig | 4 ++-- > drivers/mtd/nand/cafe_nand.c | 2 +- > drivers/net/Kconfig | 21 ++++++++++----------- > drivers/net/appletalk/Kconfig | 2 +- > drivers/net/atp.c | 2 +- > drivers/net/epic100.c | 4 ++-- > drivers/net/hamradio/Kconfig | 2 +- > drivers/net/ibmlana.c | 2 +- > drivers/net/irda/donauboe.h | 2 +- > drivers/net/pci-skeleton.c | 2 +- > drivers/net/pcmcia/3c574_cs.c | 2 +- > drivers/net/sc92031.c | 2 +- > drivers/net/tlan.c | 2 +- > drivers/net/tokenring/tms380tr.c | 2 +- > drivers/net/tulip/Kconfig | 2 +- > drivers/net/usb/plusb.c | 2 +- > drivers/net/wan/Kconfig | 2 +- > drivers/net/wireless/ath/ath5k/ath5k.h | 2 +- > drivers/net/wireless/ath/ath5k/reg.h | 1 - > drivers/net/wireless/p54/Kconfig | 6 +++--- > drivers/net/wireless/prism54/islpci_hotplug.c | 2 +- > drivers/parisc/README.dino | 3 +-- > drivers/pci/quirks.c | 3 ++- > drivers/pcmcia/yenta_socket.c | 2 +- > drivers/pnp/pnpbios/proc.c | 1 - > drivers/scsi/Kconfig | 9 +++++---- > drivers/serial/8250.c | 2 +- > drivers/serial/bfin_sport_uart.c | 2 +- > drivers/serial/bfin_sport_uart.h | 2 +- > drivers/serial/uartlite.c | 2 +- > drivers/staging/asus_oled/README | 2 +- > drivers/staging/asus_oled/asus_oled.c | 2 +- > drivers/staging/comedi/drivers/cb_pcimdas.c | 2 +- > drivers/staging/comedi/drivers/daqboard2000.c | 4 ++-- > drivers/staging/comedi/drivers/ni_labpc.c | 2 +- > drivers/staging/comedi/drivers/ni_mio_common.c | 2 +- > drivers/staging/comedi/drivers/plx9080.h | 2 +- > drivers/staging/comedi/drivers/rtd520.c | 2 +- > drivers/staging/quickstart/quickstart.c | 3 +-- > drivers/uio/Kconfig | 6 +++--- > drivers/usb/serial/Kconfig | 4 ++-- > drivers/usb/serial/ftdi_sio_ids.h | 12 ++++++------ > drivers/usb/serial/keyspan.c | 2 +- > drivers/usb/serial/keyspan.h | 2 +- > drivers/usb/serial/mct_u232.h | 9 ++++----- > drivers/usb/storage/Kconfig | 2 +- > drivers/video/Kconfig | 10 +++++----- > drivers/video/arcfb.c | 1 - > drivers/video/epson1355fb.c | 2 +- > drivers/video/fbcvt.c | 2 +- > drivers/video/hecubafb.c | 2 +- > drivers/video/metronomefb.c | 2 +- > firmware/keyspan_pda/keyspan_pda.S | 2 +- > firmware/keyspan_pda/xircom_pgs.S | 2 +- > fs/hostfs/hostfs.h | 7 +------ > fs/partitions/ldm.c | 2 +- > fs/partitions/ldm.h | 2 +- > fs/reiserfs/Kconfig | 6 ++++-- > fs/reiserfs/README | 2 +- > include/crypto/gf128mul.h | 4 ++-- > include/linux/fdreg.h | 2 +- > include/linux/if_infiniband.h | 2 +- > include/linux/n_r3964.h | 1 - > net/ax25/Kconfig | 8 ++++---- > net/ipv4/Kconfig | 4 ++-- > net/ipv4/cipso_ipv4.c | 2 +- > net/ipv4/fib_trie.c | 2 +- > net/ipv4/netfilter/Kconfig | 2 +- > net/ipv4/tcp_illinois.c | 2 +- > net/ipv4/tcp_input.c | 4 ++-- > net/ipv4/tcp_veno.c | 2 +- > net/netfilter/nf_conntrack_proto_tcp.c | 4 ++-- > sound/oss/ac97_codec.c | 7 ++----- > sound/pci/ens1370.c | 2 +- > sound/pci/intel8x0.c | 2 +- > 135 files changed, 184 insertions(+), 209 deletions(-) > > diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c > index bf88f71..aa0e0c5 100644 > --- a/drivers/ata/pata_it821x.c > +++ b/drivers/ata/pata_it821x.c > @@ -15,8 +15,8 @@ > * May be copied or modified under the terms of the GNU General Public License > * Based in part on the ITE vendor provided SCSI driver. > * > - * Documentation available from > - * http://www.ite.com.tw/pc/IT8212F_V04.pdf > + * Documentation available from IT8212F_V04.pdf > + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91 > * Some other documents are NDA. > * > * The ITE8212 isn't exactly a standard IDE controller. It has two > diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig > index be7461c..31c6010 100644 > --- a/drivers/atm/Kconfig > +++ b/drivers/atm/Kconfig > @@ -301,7 +301,7 @@ config ATM_IA > control memory (128K-1KVC, 512K-4KVC), the size of the packet > memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3, > UTP155, UTP25, DS3 and E3). Go to: > - <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM> > + <http://www.iphase.com/> > for more info about the cards. Say Y (or M to compile as a module > named iphase) here if you have one of these cards. > > diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig > index 4b66c69..c8ad619 100644 > --- a/drivers/char/agp/Kconfig > +++ b/drivers/char/agp/Kconfig > @@ -34,7 +34,7 @@ config AGP_ALI > X on the following ALi chipsets. The supported chipsets > include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. > For the ALi-chipset question, ALi suggests you refer to > - <http://www.ali.com.tw/eng/support/index.shtml>. > + <http://www.ali.com.tw/>. > > The M1541 chipset can do AGP 1x and 2x, but note that there is an > acknowledged incompatibility with Matrox G200 cards. Due to > diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c > index e763d33..75b763c 100644 > --- a/drivers/char/agp/i460-agp.c > +++ b/drivers/char/agp/i460-agp.c > @@ -1,7 +1,7 @@ > /* > * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of > * the "Intel 460GTX Chipset Software Developer's Manual": > - * http://developer.intel.com/design/itanium/downloads/24870401s.htm > + * http://www.intel.com/design/archives/itanium/downloads/248704.htm > */ > /* > * 460GX support by Chris Ahna <christopher.j.ahna(a)intel.com> > diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c > index 033e150..0848ca9 100644 > --- a/drivers/char/apm-emulation.c > +++ b/drivers/char/apm-emulation.c > @@ -7,8 +7,8 @@ > * Intel Corporation, Microsoft Corporation. Advanced Power Management > * (APM) BIOS Interface Specification, Revision 1.2, February 1996. > * > - * [This document is available from Microsoft at: > - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] > + * This document is available from Microsoft at: > + * http://www.microsoft.com/whdc/archive/amp_12.mspx > */ > #include <linux/module.h> > #include <linux/poll.h> > diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c > index 7b98c06..3ed20e8 100644 > --- a/drivers/char/ipmi/ipmi_bt_sm.c > +++ b/drivers/char/ipmi/ipmi_bt_sm.c > @@ -2,7 +2,7 @@ > * ipmi_bt_sm.c > * > * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part > - * of the driver architecture at http://sourceforge.net/project/openipmi > + * of the driver architecture at http://sourceforge.net/projects/openipmi > * > * Author: Rocky Craig <first.last(a)hp.com> > * > diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c > index 7bd7c45..3e94c37 100644 > --- a/drivers/char/ipmi/ipmi_si_intf.c > +++ b/drivers/char/ipmi/ipmi_si_intf.c > @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) > > /* > * Defined at > - * http://h21007.www2.hp.com/portal/download/files > - * /unprot/hpspmi.pdf > + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf > */ > struct SPMITable { > s8 Signature[4]; > diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c > index a98290d..88dda0c 100644 > --- a/drivers/char/n_r3964.c > +++ b/drivers/char/n_r3964.c > @@ -4,7 +4,6 @@ > * Copyright by > * Philips Automation Projects > * Kassel (Germany) > - * http://www.pap-philips.de > * ----------------------------------------------------------- > * This software may be used and distributed according to the terms of > * the GNU General Public License, incorporated herein by reference. > diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig > index ffa0efc..6614416 100644 > --- a/drivers/char/pcmcia/Kconfig > +++ b/drivers/char/pcmcia/Kconfig > @@ -28,7 +28,7 @@ config CARDMAN_4000 > > This kernel driver requires additional userspace support, either > by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), > - or via the cm4000 backend of OpenCT (http://www.opensc.com/). > + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). > > config CARDMAN_4040 > tristate "Omnikey CardMan 4040 support" > @@ -41,7 +41,7 @@ config CARDMAN_4040 > in I/O space. To use the kernel driver, you will need either the > PC/SC ifdhandler provided from the Omnikey homepage > (http://www.omnikey.com/), or a current development version of OpenCT > - (http://www.opensc.org/). > + (http://www.opensc-project.org/opensc). > > config IPWIRELESS > tristate "IPWireless 3G UMTS PCMCIA card support" > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig > index 4dc338f..f6595ab 100644 > --- a/drivers/char/tpm/Kconfig > +++ b/drivers/char/tpm/Kconfig > @@ -58,6 +58,6 @@ config TCG_INFINEON > To compile this driver as a module, choose M here; the module > will be called tpm_infineon. > Further information on this driver and the supported hardware > - can be found at http://www.prosec.rub.de/tpm > + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ > > endif # TCG_TPM > diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c > index f584407..76da32e 100644 > --- a/drivers/char/tpm/tpm_infineon.c > +++ b/drivers/char/tpm/tpm_infineon.c > @@ -7,7 +7,7 @@ > * Copyright (C) 2005, Marcel Selhorst <m.selhorst(a)sirrix.com> > * Sirrix AG - security technologies, http://www.sirrix.com and > * Applied Data Security Group, Ruhr-University Bochum, Germany > - * Project-Homepage: http://www.prosec.rub.de/tpm > + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ > * > * This program is free software; you can redistribute it and/or > * modify it under the terms of the GNU General Public License as > diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c > index 0709681..413f0df 100644 > --- a/drivers/edac/edac_device_sysfs.c > +++ b/drivers/edac/edac_device_sysfs.c > @@ -1,7 +1,7 @@ > /* > * file for managing the edac_device class of devices for EDAC > * > - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com) > + * (C) 2007 SoftwareBitMaker > * > * This file may be distributed under the terms of the > * GNU General Public License. > diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c > index a2fa1fe..678405a 100644 > --- a/drivers/edac/i82443bxgx_edac.c > +++ b/drivers/edac/i82443bxgx_edac.c > @@ -12,7 +12,7 @@ > * 440GX fix by Jason Uhlenkott <juhlenko(a)akamai.com>. > * > * Written with reference to 82443BX Host Bridge Datasheet: > - * http://www.intel.com/design/chipsets/440/documentation.htm > + * http://download.intel.com/design/chipsets/datashts/29063301.pdf > * references to this document given in []. > * > * This module doesn't support the 440LX, but it may be possible to > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig > index 280c9b5..32e67a1 100644 > --- a/drivers/firmware/Kconfig > +++ b/drivers/firmware/Kconfig > @@ -73,8 +73,8 @@ config EFI_PCDP > on how the driver discovers devices. > > You must also enable the appropriate drivers (serial, VGA, etc.) > - > - See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> > + See DIG64_HCDPv20_042804.pdf available from > + <http://www.dig64.org/specifications/> > > config DELL_RBU > tristate "BIOS update support for DELL systems via sysfs" > diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c > index f287fe7..96c25d9 100644 > --- a/drivers/firmware/edd.c > +++ b/drivers/firmware/edd.c > @@ -15,7 +15,7 @@ > * made in setup.S, copied to safe structures in setup.c, > * and presents it in sysfs. > * > - * Please see http://linux.dell.com/edd30/results.html for > + * Please see http://linux.dell.com/edd/results.html for > * the list of BIOSs which have been reported to implement EDD. > * > * This program is free software; you can redistribute it and/or modify > diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h > index ce910d6..e098c6e 100644 > --- a/drivers/firmware/pcdp.h > +++ b/drivers/firmware/pcdp.h > @@ -1,8 +1,8 @@ > /* > * Definitions for PCDP-defined console devices > * > - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf > - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf > + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.), > + * please see <http://www.dig64.org/specifications/> > * > * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. > * Khalid Aziz <khalid.aziz(a)hp.com> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c > index 949326d..58e65f9 100644 > --- a/drivers/gpu/drm/drm_modes.c > +++ b/drivers/gpu/drm/drm_modes.c > @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); > * according to the hdisplay, vdisplay, vrefresh. > * It is based from the VESA(TM) Coordinated Video Timing Generator by > * Graham Loveridge April 9, 2003 available at > - * http://www.vesa.org/public/CVT/CVTd6r1.xls > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls > * > * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. > * What I have done is to translate it by using integer calculation. > diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c > index 251b631..60befc0 100644 > --- a/drivers/hwmon/adm1025.c > +++ b/drivers/hwmon/adm1025.c > @@ -12,7 +12,7 @@ > * resolution of about 0.5% of the nominal value). Temperature values are > * reported with a 1 deg resolution and a 3 deg accuracy. Complete > * datasheet can be obtained from Analog's website at: > - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00… > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025 > * > * This driver also supports the ADM1025A, which differs from the ADM1025 > * only in that it has "open-drain VID inputs while the ADM1025 has > diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c > index 65335b2..4bf969c 100644 > --- a/drivers/hwmon/adm1026.c > +++ b/drivers/hwmon/adm1026.c > @@ -6,7 +6,7 @@ > > Chip details at: > > - <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf> > + <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026> > > This program is free software; you can redistribute it and/or modify > it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c > index 9638d58..95cbfb3 100644 > --- a/drivers/hwmon/f75375s.c > +++ b/drivers/hwmon/f75375s.c > @@ -6,10 +6,10 @@ > * Datasheets available at: > * > * f75375: > - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf > + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf > * > * f75373: > - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf > + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c > index 1f63d1a..1d6a6fa 100644 > --- a/drivers/hwmon/g760a.c > +++ b/drivers/hwmon/g760a.c > @@ -5,7 +5,7 @@ > Copyright (C) 2007 Herbert Valerio Riedel <hvr(a)gnu.org> > > Complete datasheet is available at GMT's website: > - http://www.gmt.com.tw/datasheet/g760a.pdf > + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf > > This program is free software; you can redistribute it and/or modify > it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c > index bf0862a..897702d 100644 > --- a/drivers/hwmon/hwmon-vid.c > +++ b/drivers/hwmon/hwmon-vid.c > @@ -38,7 +38,7 @@ > * available at http://developer.intel.com/. > * > * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, > - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/260… > + * http://developer.amd.com/documentation/articles/pages/1212200690_2.aspx > * Table 74. VID Code Voltages > * This corresponds to an arbitrary VRM code of 24 in the functions below. > * These CPU models (K8 revision <= E) have 5 VID pins. See also: > diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c > index 4516369..97d98fb 100644 > --- a/drivers/ide/hpt366.c > +++ b/drivers/ide/hpt366.c > @@ -12,7 +12,7 @@ > * > * > * HighPoint has its own drivers (open source except for the RAID part) > - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. > + * available from http://www.highpoint-tech.com/USA_new/service_support.htm > * This may be useful to anyone wanting to work on this driver, however do not > * trust them too much since the code tends to become less and less meaningful > * as the time passes... :-/ > diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c > index d81e496..808bcdc 100644 > --- a/drivers/ide/ht6560b.c > +++ b/drivers/ide/ht6560b.c > @@ -10,7 +10,6 @@ > * Author: Mikko Ala-Fossi <maf(a)iki.fi> > * Jan Evert van Grootheest <j.e.van.grootheest(a)caiway.nl> > * > - * Try: http://www.maf.iki.fi/~maf/ht6560b/ > */ > > #define DRV_NAME "ht6560b" > diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig > index 89d70de..6e35ecc 100644 > --- a/drivers/infiniband/Kconfig > +++ b/drivers/infiniband/Kconfig > @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD > Userspace InfiniBand Management Datagram (MAD) support. This > is the kernel side of the userspace MAD support, which allows > userspace processes to send and receive MADs. You will also > - need libibumad from <http://www.openib.org>. > + need libibumad from <http://www.openfabrics.org/downloads/management/>. > > config INFINIBAND_USER_ACCESS > tristate "InfiniBand userspace access (verbs and CM)" > @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS > to set up connections and directly access InfiniBand > hardware for fast-path operations. You will also need > libibverbs, libibcm and a hardware driver library from > - <http://www.openib.org>. > + <http://www.openfabrics.org/git/>. > > config INFINIBAND_USER_MEM > bool > diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig > index 2acec3f..2b6352b 100644 > --- a/drivers/infiniband/hw/cxgb3/Kconfig > +++ b/drivers/infiniband/hw/cxgb3/Kconfig > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs(a)chelsio.com>. > > diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig > index ccb85ea..6b7e6c5 100644 > --- a/drivers/infiniband/hw/cxgb4/Kconfig > +++ b/drivers/infiniband/hw/cxgb4/Kconfig > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs(a)chelsio.com>. > > diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig > index b411c51..d00af71 100644 > --- a/drivers/infiniband/ulp/iser/Kconfig > +++ b/drivers/infiniband/ulp/iser/Kconfig > @@ -9,4 +9,4 @@ config INFINIBAND_ISER > > The iSER protocol is defined by IETF. > See <http://www.ietf.org/rfc/rfc5046.txt> > - and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF> > + and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF> > diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c > index 0ffaf2c..e68e497 100644 > --- a/drivers/input/joystick/gamecon.c > +++ b/drivers/input/joystick/gamecon.c > @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc) > * PSX support > * > * See documentation at: > - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt > + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt > * http://www.gamesx.com/controldata/psxcont/psxcont.htm > - * ftp://milano.usal.es/pablo/ > * > */ > > diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c > index 2b0eba6..b09c7d1 100644 > --- a/drivers/input/misc/cm109.c > +++ b/drivers/input/misc/cm109.c > @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode) > > /* > * Keymap for ATCom AU-100 > - * http://www.atcom.cn/En_products_AU100.html > + * http://www.atcom.cn/products.html > * http://www.packetizer.com/products/au100/ > * http://www.voip-info.org/wiki/view/AU-100 > * > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig > index c714ca2..bf5fd7f 100644 > --- a/drivers/input/mouse/Kconfig > +++ b/drivers/input/mouse/Kconfig > @@ -30,6 +30,7 @@ config MOUSE_PS2 > <http://w1.894.telia.com/~u89404340/touchpad/index.html> > and a new version of GPM at: > <http://www.geocities.com/dt_or/gpm/gpm.html> > + <http://xorg.freedesktop.org/archive/individual/driver/> > to take advantage of the advanced features of the touchpad. > > If unsure, say Y. > diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c > index 88121c5..1fd8f5e 100644 > --- a/drivers/input/mouse/touchkit_ps2.c > +++ b/drivers/input/mouse/touchkit_ps2.c > @@ -21,8 +21,8 @@ > * > * Based upon touchkitusb.c > * > - * Vendor documentation is available in support section of: > - * http://www.egalax.com.tw/ > + * Vendor documentation is available at: > + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.p… > */ > > #include <linux/kernel.h> > diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c > index efd3aeb..36e57de 100644 > --- a/drivers/input/touchscreen/mk712.c > +++ b/drivers/input/touchscreen/mk712.c > @@ -17,7 +17,7 @@ > * found in Gateway AOL Connected Touchpad computers. > * > * Documentation for ICS MK712 can be found at: > - * http://www.icst.com/pdf/mk712.pdf > + * http://www.idt.com/products/getDoc.cfm?docID=18713923 > */ > > /* > diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c > index 861bdf3..d501393 100644 > --- a/drivers/isdn/i4l/isdn_audio.c > +++ b/drivers/isdn/i4l/isdn_audio.c > @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in, > > /* > * Goertzel algorithm. > - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/ > + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ > * for more info. > * Result is stored into an sk_buff and queued up for later > * evaluation. > diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c > index d0d2213..9e3e2c5 100644 > --- a/drivers/macintosh/therm_adt746x.c > +++ b/drivers/macintosh/therm_adt746x.c > @@ -3,9 +3,9 @@ > * > * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt > * > - * Documentation from > - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf > - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf > + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467 > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460 > * > */ > > diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c > index 1e9fbfa..0f590b3 100644 > --- a/drivers/media/IR/keymaps/rc-manli.c > +++ b/drivers/media/IR/keymaps/rc-manli.c > @@ -13,7 +13,6 @@ > #include <media/rc-map.h> > > /* Michael Tokarev <mjt(a)tls.msk.ru> > - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg > keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at > least, and probably other cards too. > The "ascii-art picture" below (in comments, first row > diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c > index a6be529..87279d9 100644 > --- a/drivers/media/dvb/ttpci/av7110.c > +++ b/drivers/media/dvb/ttpci/av7110.c > @@ -26,7 +26,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > > @@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110) > /* Budgetpatch note: > * Original hardware design by Roberto Deza: > * There is a DVB_Wiki at > - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page > - * where is described this 'DVB TT Budget Patch', on Card Modding: > - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch > - * On the short description there is also a link to a external file, > - * with more details: > - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip > - * > + * http://www.linuxtv.org/ > * New software triggering design by Emard that works on > * original Roberto Deza's hardware: > * > diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c > index 13efba9..878da6a 100644 > --- a/drivers/media/dvb/ttpci/av7110_av.c > +++ b/drivers/media/dvb/ttpci/av7110_av.c > @@ -25,7 +25,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/types.h> > diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c > index 4eba35a..7564c26 100644 > --- a/drivers/media/dvb/ttpci/av7110_ca.c > +++ b/drivers/media/dvb/ttpci/av7110_ca.c > @@ -25,7 +25,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/kernel.h> > diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c > index e162691..f1cbfe5 100644 > --- a/drivers/media/dvb/ttpci/av7110_hw.c > +++ b/drivers/media/dvb/ttpci/av7110_hw.c > @@ -22,7 +22,7 @@ > * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > /* for debugging ARM communication: */ > diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c > index 8986d96..ac20c5b 100644 > --- a/drivers/media/dvb/ttpci/av7110_v4l.c > +++ b/drivers/media/dvb/ttpci/av7110_v4l.c > @@ -22,7 +22,7 @@ > * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/kernel.h> > diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c > index 983672a..97afc01 100644 > --- a/drivers/media/dvb/ttpci/budget-av.c > +++ b/drivers/media/dvb/ttpci/budget-av.c > @@ -30,7 +30,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include "budget.h" > diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c > index 13ac9e3..a9c2c32 100644 > --- a/drivers/media/dvb/ttpci/budget-ci.c > +++ b/drivers/media/dvb/ttpci/budget-ci.c > @@ -26,7 +26,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/module.h> > diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c > index ba18e56..0546613 100644 > --- a/drivers/media/dvb/ttpci/budget-core.c > +++ b/drivers/media/dvb/ttpci/budget-core.c > @@ -31,7 +31,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > > diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c > index 9c92f9d..5798355 100644 > --- a/drivers/media/dvb/ttpci/budget-patch.c > +++ b/drivers/media/dvb/ttpci/budget-patch.c > @@ -27,7 +27,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include "av7110.h" > diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c > index 874a10a..d238fb9 100644 > --- a/drivers/media/dvb/ttpci/budget.c > +++ b/drivers/media/dvb/ttpci/budget.c > @@ -31,7 +31,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include "budget.h" > diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c > index 4349213..255d40d 100644 > --- a/drivers/media/radio/radio-maxiradio.c > +++ b/drivers/media/radio/radio-maxiradio.c > @@ -13,7 +13,7 @@ > * anybody does please mail me. > * > * For the pdf file see: > - * http://www.semiconductors.philips.com/pip/TEA5757H/V1 > + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf > * > * > * CHANGES: > diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c > index 0343928..a5363ed 100644 > --- a/drivers/media/radio/radio-typhoon.c > +++ b/drivers/media/radio/radio-typhoon.c > @@ -1,8 +1,6 @@ > /* Typhoon Radio Card driver for radio support > * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel(a)gmx.de> > * > - * Card manufacturer: > - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e > * > * Notes on the hardware > * > diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig > index f6e4d04..d000522 100644 > --- a/drivers/media/video/Kconfig > +++ b/drivers/media/video/Kconfig > @@ -978,7 +978,7 @@ config USB_STKWEBCAM > Supported devices are typically found in some Asus laptops, > with USB id 174f:a311 and 05e1:0501. Other Syntek cameras > may be supported by the stk11xx driver, from which this is > - derived, see http://stk11xx.sourceforge.net > + derived, see <http://sourceforge.net/projects/syntekdriver/> > > To compile this driver as a module, choose M here: the > module will be called stkwebcam. > diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c > index be35e69..9536f1a 100644 > --- a/drivers/media/video/cafe_ccic.c > +++ b/drivers/media/video/cafe_ccic.c > @@ -4,7 +4,7 @@ > * sensor. > * > * The data sheet for this device can be found at: > - * http://www.marvell.com/products/pcconn/88ALP01.jsp > + * http://www.marvell.com/products/pc_connectivity/88alp01/ > * > * Copyright 2006 One Laptop Per Child Association, Inc. > * Copyright 2006-7 Jonathan Corbet <corbet(a)lwn.net> > diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c > index 6b805af..fe10909 100644 > --- a/drivers/media/video/cx18/cx18-cards.c > +++ b/drivers/media/video/cx18/cx18-cards.c > @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = { > .tv = { 0x61, 0x60, I2C_CLIENT_END }, > }; > > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ > This keeps the PCI ID database up to date. Note that the entries > must be added under vendor 0x4444 (Conexant) as subsystem IDs. > New vendor IDs should still be added to the vendor ID list. */ > diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c > index abd64e8..53a6782 100644 > --- a/drivers/media/video/cx23885/cx23885-417.c > +++ b/drivers/media/video/cx23885/cx23885-417.c > @@ -7,7 +7,7 @@ > * (c) 2008 Steven Toth <stoth(a)linuxtv.org> > * - CX23885/7/8 support > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c > index e46e1ce..660b2a9 100644 > --- a/drivers/media/video/cx88/cx88-blackbird.c > +++ b/drivers/media/video/cx88/cx88-blackbird.c > @@ -9,7 +9,7 @@ > * (c) 2005-2006 Mauro Carvalho Chehab <mchehab(a)infradead.org> > * - video_ioctl2 conversion > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c > index ca1fd32..87afbbe 100644 > --- a/drivers/media/video/ivtv/ivtv-cards.c > +++ b/drivers/media/video/ivtv/ivtv-cards.c > @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { > > /********************** card configuration *******************************/ > > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ > This keeps the PCI ID database up to date. Note that the entries > must be added under vendor 0x4444 (Conexant) as subsystem IDs. > New vendor IDs should still be added to the vendor ID list. */ > diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c > index ef0c817..b1dbcf1 100644 > --- a/drivers/media/video/mxb.c > +++ b/drivers/media/video/mxb.c > @@ -3,7 +3,7 @@ > > Copyright (C) 1998-2006 Michael Hunold <michael(a)mihu.de> > > - Visit http://www.mihu.de/linux/saa7146/mxb/ > + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html > for further details about this card. > > This program is free software; you can redistribute it and/or modify > diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > index 2782f94..2e86fdc 100644 > --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > @@ -4,7 +4,6 @@ > * * > * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio * > * <medaglia(a)undl.org.br> * > - * http://cadu.homelinux.com:8080/ * > * * > * Support for SN9C103, DAC Magnitude, exposure and green gain controls * > * added by Luca Risolia <luca.risolia(a)studio.unibo.it> * > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > index b743312..3b28933 100644 > --- a/drivers/misc/Kconfig > +++ b/drivers/misc/Kconfig > @@ -112,8 +112,8 @@ config IBM_ASM > > WARNING: This software may not be supported or function > correctly on your IBM server. Please consult the IBM ServerProven > - website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for > - information on the specific driver level and support statement > + website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> > + for information on the specific driver level and support statement > for your IBM server. > > config PHANTOM > diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c > index 3e6c47b..ba29d2f 100644 > --- a/drivers/mtd/chips/cfi_cmdset_0002.c > +++ b/drivers/mtd/chips/cfi_cmdset_0002.c > @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) > > /* > * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4 > - * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 > - * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_200… > + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 > + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf > * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf > */ > if (extp->MajorVersion != '1' || > diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c > index f4359fe..caf6041 100644 > --- a/drivers/mtd/devices/lart.c > +++ b/drivers/mtd/devices/lart.c > @@ -17,7 +17,7 @@ > * - January 2000 > * > * [2] MTD internal API documentation > - * - http://www.linux-mtd.infradead.org/tech/ > + * - http://www.linux-mtd.infradead.org/ > * > * Limitations: > * > diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c > index 4d6a64c..037b399 100644 > --- a/drivers/mtd/ftl.c > +++ b/drivers/mtd/ftl.c > @@ -51,7 +51,7 @@ > > Use of the FTL format for non-PCMCIA applications may be an > infringement of these patents. For additional information, > - contact M-Systems (http://www.m-sys.com) directly. > + contact M-Systems directly. M-Systems since acquired by Sandisk. > > ======================================================================*/ > #include <linux/mtd/blktrans.h> > diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig > index 701d942..9622126 100644 > --- a/drivers/mtd/maps/Kconfig > +++ b/drivers/mtd/maps/Kconfig > @@ -172,7 +172,7 @@ config MTD_OCTAGON > This provides a 'mapping' driver which supports the way in which > the flash chips are connected in the Octagon-5066 Single Board > Computer. More information on the board is available at > - <http://www.octagonsystems.com/CPUpages/5066.html>. > + <http://www.octagonsystems.com/products/5066.aspx>. > > config MTD_VMAX > tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" > @@ -284,7 +284,7 @@ config MTD_TQM8XXL > chips, currently uses AMD one. This 'mapping' driver supports > that arrangement, allowing the CFI probe and command set driver > code to communicate with the chips on the TQM8xxL board. More at > - <http://www.denx.de/embedded-ppc-en.html>. > + <http://www.denx.de/wiki/PPCEmbedded/>. > > config MTD_RPXLITE > tristate "CFI Flash device mapped on RPX Lite or CLLF" > diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c > index db1dfc5..e06c898 100644 > --- a/drivers/mtd/nand/cafe_nand.c > +++ b/drivers/mtd/nand/cafe_nand.c > @@ -2,7 +2,7 @@ > * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01 > * > * The data sheet for this device can be found at: > - * http://www.marvell.com/products/pcconn/88ALP01.jsp > + * http://wiki.laptop.org/go/Datasheets > * > * Copyright © 2006 Red Hat, Inc. > * Copyright © 2006 David Woodhouse <dwmw2(a)infradead.org> > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 2cc81a5..5b66842 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -921,7 +921,7 @@ config SMC91X > including the SMC91C94 and the SMC91C111. Say Y if you want it > compiled into the kernel, and read the file > <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, > - available from <http://www.linuxdoc.org/docs.html#howto>. > + available from <http://www.tldp.org/docs.html#howto>. > > This driver is also available as a module ( = code which can be > inserted in and removed from the running kernel whenever you want). > @@ -1031,7 +1031,7 @@ config SMC911X > including the new LAN9115, LAN9116, LAN9117, and LAN9118. > Say Y if you want it compiled into the kernel, > and read the Ethernet-HOWTO, available from > - <http://www.linuxdoc.org/docs.html#howto>. > + <http://www.tldp.org/docs.html#howto>. > > This driver is also available as a module. The module will be > called smc911x. If you want to compile it as a module, say M > @@ -1513,7 +1513,7 @@ config E100 > > For the latest Intel PRO/100 network driver for Linux, see: > > - <http://appsr.intel.com/scripts-df/support_intel.asp> > + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> > > More specific information on configuring the driver is in > <file:Documentation/networking/e100.txt>. > @@ -1539,9 +1539,8 @@ config FEALNX > select CRC32 > select MII > help > - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet > - cards. Specifications and data at > - <http://www.myson.com.hk/mtd/datasheet/>. > + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet > + cards. <http://www.myson.com.tw/> > > config NATSEMI > tristate "National Semiconductor DP8381x series PCI Ethernet support" > @@ -1715,7 +1714,7 @@ config SMSC9420 > This is a driver for SMSC's LAN9420 PCI ethernet adapter. > Say Y if you want it compiled into the kernel, > and read the Ethernet-HOWTO, available from > - <http://www.linuxdoc.org/docs.html#howto>. > + <http://www.tldp.org/docs.html#howto>. > > This driver is also available as a module. The module will be > called smsc9420. If you want to compile it as a module, say M > @@ -2550,7 +2549,7 @@ config CHELSIO_T1 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs(a)chelsio.com>. > > @@ -2582,7 +2581,7 @@ config CHELSIO_T3 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs(a)chelsio.com>. > > @@ -2607,7 +2606,7 @@ config CHELSIO_T4 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs(a)chelsio.com>. > > @@ -2630,7 +2629,7 @@ config CHELSIO_T4VF > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs(a)chelsio.com>. > > diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig > index 0a0e0cd..f5a8916 100644 > --- a/drivers/net/appletalk/Kconfig > +++ b/drivers/net/appletalk/Kconfig > @@ -18,7 +18,7 @@ config ATALK > > General information about how to connect Linux, Windows machines and > Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The > - NET-3-HOWTO, available from > + NET3-4-HOWTO, available from > <http://www.tldp.org/docs.html#howto>, contains valuable > information as well. > > diff --git a/drivers/net/atp.c b/drivers/net/atp.c > index bd2f9d3..0eee044 100644 > --- a/drivers/net/atp.c > +++ b/drivers/net/atp.c > @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ > > In 1997 Realtek made available the documentation for the second generation > RTL8012 chip, which has lead to several driver improvements. > - http://www.realtek.com.tw/cn/cn.html > + http://www.realtek.com.tw/ > > Theory of Operation > > diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c > index 57c8ac0..c6e2571 100644 > --- a/drivers/net/epic100.c > +++ b/drivers/net/epic100.c > @@ -131,8 +131,8 @@ IIIa. Ring buffers > > IVb. References > > -http://www.smsc.com/main/tools/discontinued/83c171.pdf > -http://www.smsc.com/main/tools/discontinued/83c175.pdf > +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf > +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf > http://scyld.com/expert/NWay.html > http://www.national.com/pf/DP/DP83840A.html > > diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig > index 62d5d5c..95dbcfd 100644 > --- a/drivers/net/hamradio/Kconfig > +++ b/drivers/net/hamradio/Kconfig > @@ -73,7 +73,7 @@ config DMASCC > certain parameters, such as channel access timing, clock mode, and > DMA channel. This is accomplished with a small utility program, > dmascc_cfg, available at > - <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to > + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to > get at least version 1.27 of dmascc_cfg, as older versions will not > work with the current driver. > > diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c > index 294ccfb..8de3273 100644 > --- a/drivers/net/ibmlana.c > +++ b/drivers/net/ibmlana.c > @@ -23,7 +23,7 @@ paper sources: > 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 > Document Number SC30-3661-00' by IBM for info on the adapter itself > > - Also see http://www.natsemi.com/ > + Also see http://www.national.com/analog > > special acknowledgements to: > - Bob Eager for helping me out with documentation from IBM > diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h > index 36c3060..4dc39e5 100644 > --- a/drivers/net/irda/donauboe.h > +++ b/drivers/net/irda/donauboe.h > @@ -54,7 +54,7 @@ > /* anyone who has. HOWEVER the chip bears a striking resemblence */ > /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ > /* the documentation for this is freely available at */ > -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */ > +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ > /* The mapping between the registers in that document and the */ > /* Registers in the 701 oboe chip are as follows */ > > diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c > index 56f3fc4..627b619 100644 > --- a/drivers/net/pci-skeleton.c > +++ b/drivers/net/pci-skeleton.c > @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer. > > IVb. References > > -http://www.realtek.com.tw/cn/cn.html > +http://www.realtek.com.tw/ > http://www.scyld.com/expert/NWay.html > > IVc. Errata > diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c > index c683f77..e092679 100644 > --- a/drivers/net/pcmcia/3c574_cs.c > +++ b/drivers/net/pcmcia/3c574_cs.c > @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. > V. References > > http://www.scyld.com/expert/NWay.html > -http://www.national.com/pf/DP/DP83840.html > +http://www.national.com/opf/DP/DP83840A.html > > Thanks to Terry Murphy of 3Com for providing development information for > earlier 3Com products. > diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c > index 8c4067a..12fb560 100644 > --- a/drivers/net/sc92031.c > +++ b/drivers/net/sc92031.c > @@ -15,7 +15,7 @@ > * Rewritten for 2.6 by Cesar Eduardo Barros > * > * A datasheet for this chip can be found at > - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf > + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf > */ > > /* Note about set_mac_address: I don't know how to change the hardware > diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c > index ccee3ed..ef000b2 100644 > --- a/drivers/net/tlan.c > +++ b/drivers/net/tlan.c > @@ -78,7 +78,7 @@ > * - Updated tlan.txt accordingly. > * - Adjusted minimum/maximum frame length. > * - There is now a TLAN website up at > - * http://tlan.kernel.dk > + * http://hp.sourceforge.net/ > * > * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now > * reports PHY information when used with Donald > diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c > index 435ef7d..ccc16d6 100644 > --- a/drivers/net/tokenring/tms380tr.c > +++ b/drivers/net/tokenring/tms380tr.c > @@ -5,7 +5,7 @@ > * Originally sktr.c: Written 1997 by Christoph Goos > * > * A fine result of the Linux Systems Network Architecture Project. > - * http://www.linux-sna.org > + * http://www.vanheusden.com/sna/ > * > * This software may be used and distributed according to the terms > * of the GNU General Public License, incorporated herein by reference. > diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig > index 516713f..14c02e1 100644 > --- a/drivers/net/tulip/Kconfig > +++ b/drivers/net/tulip/Kconfig > @@ -151,7 +151,7 @@ config ULI526X > select CRC32 > ---help--- > This driver is for ULi M5261/M5263 10/100M Ethernet Controller > - (<http://www.uli.com.tw/>). > + (<http://www.nvidia.com/page/uli_drivers.html>). > > To compile this driver as a module, choose M here. The module will > be called uli526x. > diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c > index 08555f8..08ad269 100644 > --- a/drivers/net/usb/plusb.c > +++ b/drivers/net/usb/plusb.c > @@ -32,7 +32,7 @@ > > > /* > - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com > + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ > * > * The protocol and handshaking used here should be bug-compatible > * with the Linux 2.2 "plusb" driver, by Deti Fliegl. > diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig > index d08ce6a..423eb26 100644 > --- a/drivers/net/wan/Kconfig > +++ b/drivers/net/wan/Kconfig > @@ -409,7 +409,7 @@ config CYCLADES_SYNC > tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" > depends on WAN_ROUTER_DRIVERS && (PCI || ISA) > ---help--- > - Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an > + Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an > intelligent multiprotocol WAN adapter with data transfer rates up to > 512 Kbps. These cards support the X.25 and SNA related protocols. > > diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h > index ea6362a..97659a0 100644 > --- a/drivers/net/wireless/ath/ath5k/ath5k.h > +++ b/drivers/net/wireless/ath/ath5k/ath5k.h > @@ -351,7 +351,7 @@ struct ath5k_srev_name { > /* > * Some of this information is based on Documentation from: > * > - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG > + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG > * > * Modulation for Atheros' eXtended Range - range enhancing extension that is > * supposed to double the distance an Atheros client device can keep a > diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h > index 55b4ac6..69a9b34 100644 > --- a/drivers/net/wireless/ath/ath5k/reg.h > +++ b/drivers/net/wireless/ath/ath5k/reg.h > @@ -26,7 +26,6 @@ > * Atheros presentations and papers like these: > * > * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf > - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf > * > * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf > * > diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig > index b0342a5..8e82379 100644 > --- a/drivers/net/wireless/p54/Kconfig > +++ b/drivers/net/wireless/p54/Kconfig > @@ -8,7 +8,7 @@ config P54_COMMON > also need to be enabled in order to support any devices. > > These devices require softmac firmware which can be found at > - http://prism54.org/ > + <http://wireless.kernel.org/en/users/Drivers/p54> > > If you choose to build a module, it'll be called p54common. > > @@ -20,7 +20,7 @@ config P54_USB > This driver is for USB isl38xx based wireless cards. > > These devices require softmac firmware which can be found at > - http://prism54.org/ > + <http://wireless.kernel.org/en/users/Drivers/p54> > > If you choose to build a module, it'll be called p54usb. > > @@ -34,7 +34,7 @@ config P54_PCI > supported by the fullmac driver/firmware. > > This driver requires softmac firmware which can be found at > - http://prism54.org/ > + <http://wireless.kernel.org/en/users/Drivers/p54> > > If you choose to build a module, it'll be called p54pci. > > diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c > index dc14420..b5e64d7 100644 > --- a/drivers/net/wireless/prism54/islpci_hotplug.c > +++ b/drivers/net/wireless/prism54/islpci_hotplug.c > @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0); > /* In this order: vendor, device, subvendor, subdevice, class, class_mask, > * driver_data > * If you have an update for this please contact prism54-devel(a)prism54.org > - * The latest list can be found at http://prism54.org/supported_cards.php */ > + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */ > static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = { > /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ > { > diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino > index 097324f..1627426 100644 > --- a/drivers/parisc/README.dino > +++ b/drivers/parisc/README.dino > @@ -10,8 +10,7 @@ > ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are > ** not affected." > ** > -** REVISIT: "go/pci_defect" link below is stale. > -** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/> > +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prod… > ** > ** Product First Good Serial Number > ** C200/C240 (US) US67350000 > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 89ed181..dcc333f 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir > * VIA Apollo KT133 needs PCI latency patch > * Made according to a windows driver based patch by George E. Breese > * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm > + * and http://www.georgebreese.com/net/software/#PCI > * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for > * the info on which Mr Breese based his work. > * > @@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge) > /* > * Common misconfiguration of the MediaGX/Geode PCI master that will > * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 > - * datasheets found at http://www.national.com/ds/GX for info on what > + * datasheets found at http://www.national.com/analog for info on what > * these bits do. <christer(a)weinigel.se> > */ > static void quirk_mediagx_master(struct pci_dev *dev) > diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c > index 414d9a6..91a7225 100644 > --- a/drivers/pcmcia/yenta_socket.c > +++ b/drivers/pcmcia/yenta_socket.c > @@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket) > * invisible during PCI scans because of a misconfigured subordinate number > * of the parent brige - some BIOSes seem to be too lazy to set it right. > * Does the fixup carefully by checking how far it can go without conflicts. > - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. > + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. > */ > static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) > { > diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c > index 2d8ac43..bc89f39 100644 > --- a/drivers/pnp/pnpbios/proc.c > +++ b/drivers/pnp/pnpbios/proc.c > @@ -11,7 +11,6 @@ > * > * The .../escd file is utilized by the lsescd utility written by > * Gunther Mayer. > - * http://home.t-online.de/home/gunther.mayer/lsescd > * > * The .../legacy_device_resources file is not used yet. > * > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index bbf91ae..03453d4 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -116,7 +116,7 @@ config CHR_DEV_OSST > <http://www.tldp.org/docs.html#howto> and > <file:Documentation/scsi/osst.txt> in the kernel source. > More info on the OnStream driver may be found on > - <http://linux1.onstream.nl/test/> > + <http://sourceforge.net/projects/osst/> > Please also have a look at the standard st docu, as most of it > applies to osst as well. > > @@ -156,9 +156,9 @@ config CHR_DEV_SG > directly, so you need some additional software which knows how to > talk to these devices using the SCSI protocol: > > - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD > + For scanners, look at SANE (<http://www.sane-project.org/>). For CD > writer software look at Cdrtools > - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private…>) > + (<http://cdrecord.berlios.de/private/cdrecord.html>) > and for burning a "disk at once": CDRDAO > (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high > quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). > @@ -950,6 +950,7 @@ config SCSI_IPS > ---help--- > This is support for the IBM ServeRAID hardware RAID controllers. > See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> > + and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndoci…> > for more information. If this driver does not work correctly > without modification please contact the author by email at > <ipslinux(a)adaptec.com>. > @@ -1609,7 +1610,7 @@ config SCSI_DEBUG > host adapter with one dummy SCSI disk. Each dummy disk uses kernel > RAM as storage (i.e. it is a ramdisk). To save space when multiple > dummy disks are simulated, they share the same kernel RAM for > - their storage. See <http://www.torque.net/sg/sdebug.html> for more > + their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more > information. This driver is primarily of use to those testing the > SCSI and block subsystems. If unsure, say N. > > diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c > index 24110f6..131c95f 100644 > --- a/drivers/serial/8250.c > +++ b/drivers/serial/8250.c > @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up) > /* > * Exar ST16C2550 "A2" devices incorrectly detect as > * having an EFR, and report an ID of 0x0201. See > - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf > + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html > */ > if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) > return 1; > diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c > index 5318dd3..feb62a8 100644 > --- a/drivers/serial/bfin_sport_uart.c > +++ b/drivers/serial/bfin_sport_uart.c > @@ -10,7 +10,7 @@ > > /* > * This driver and the hardware supported are in term of EE-191 of ADI. > - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf > + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf > * This application note describe how to implement a UART on a Sharc DSP, > * but this driver is implemented on Blackfin Processor. > * Transmit Frame Sync is not used by this driver to transfer data out. > diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h > index 9ce253e..6d06ce1 100644 > --- a/drivers/serial/bfin_sport_uart.h > +++ b/drivers/serial/bfin_sport_uart.h > @@ -10,7 +10,7 @@ > > /* > * This driver and the hardware supported are in term of EE-191 of ADI. > - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf > + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf > * This application note describe how to implement a UART on a Sharc DSP, > * but this driver is implemented on Blackfin Processor. > * Transmit Frame Sync is not used by this driver to transfer data out. > diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c > index 9b03d7b..3fa2e16 100644 > --- a/drivers/serial/uartlite.c > +++ b/drivers/serial/uartlite.c > @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); > * Register definitions > * > * For register details see datasheet: > - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf > + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.p… > */ > > #define ULITE_RX 0x00 > diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README > index 96b9717..0d82a6d 100644 > --- a/drivers/staging/asus_oled/README > +++ b/drivers/staging/asus_oled/README > @@ -2,7 +2,7 @@ > Driver for Asus OLED display present in some Asus laptops. > > The code of this driver is based on 'asusoled' program taken from > - https://launchpad.net/asusoled/. I just wanted to have a simple > + <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple > kernel driver for controlling this device, but I didn't know how > to do that. Now I know ;) Also, that program can not be used > with usbhid loaded, which means no USB mouse/keyboard while > diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c > index 5b279fb..8c95d8c 100644 > --- a/drivers/staging/asus_oled/asus_oled.c > +++ b/drivers/staging/asus_oled/asus_oled.c > @@ -24,7 +24,7 @@ > * > * > * Asus OLED support is based on asusoled program taken from > - * https://launchpad.net/asusoled/. > + * <http://lapsus.berlios.de/asus_oled.html>. > * > * > */ > diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c > index ced346a..78b1410 100644 > --- a/drivers/staging/comedi/drivers/cb_pcimdas.c > +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c > @@ -37,7 +37,7 @@ Configuration Options: > Developed from cb_pcidas and skel by Richard Bytheway (mocelet(a)sucs.org). > Only supports DIO, AO and simple AI in it's present form. > No interrupts, multi channel or FIFO AI, although the card looks like it could support this. > -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details. > +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. > */ > > #include "../comedidev.h" > diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c > index 6af6c83..82be77d 100644 > --- a/drivers/staging/comedi/drivers/daqboard2000.c > +++ b/drivers/staging/comedi/drivers/daqboard2000.c > @@ -50,8 +50,8 @@ Configuration options: > With some help from our swedish distributor, we got the Windows sourcecode > for the card, and here are the findings so far. > > - 1. A good document that describes the PCI interface chip is found at: > - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf > + 1. A good document that describes the PCI interface chip is 9080db-106.pdf > + available from http://www.plxtech.com/products/io/pci9080 > > 2. The initialization done so far is: > a. program the FPGA (windows code sans a lot of error messages) > diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c > index 3acf7e6..1411dd8 100644 > --- a/drivers/staging/comedi/drivers/ni_labpc.c > +++ b/drivers/staging/comedi/drivers/ni_labpc.c > @@ -37,7 +37,7 @@ boards has not > yet been added to the driver, mainly due to the fact that > I don't know the device id numbers. If you have one > of these boards, > -please file a bug report at https://bugs.comedi.org/ > +please file a bug report at http://comedi.org/ > so I can get the necessary information from you. > > The 1200 series boards have onboard calibration dacs for correcting > diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c > index bd16f91..986ef67 100644 > --- a/drivers/staging/comedi/drivers/ni_mio_common.c > +++ b/drivers/staging/comedi/drivers/ni_mio_common.c > @@ -34,7 +34,7 @@ > 340747b.pdf AT-MIO E series Register Level Programmer Manual > 341079b.pdf PCI E Series RLPM > 340934b.pdf DAQ-STC reference manual > - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) > + 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/) > release_ni611x.pdf > release_ni67xx.pdf > Other possibly relevant info: > diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h > index 485d63f..0d254a1 100644 > --- a/drivers/staging/comedi/drivers/plx9080.h > +++ b/drivers/staging/comedi/drivers/plx9080.h > @@ -13,7 +13,7 @@ > * > ******************************************************************** > * > - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ > + * Copyright (C) 1999 RG Studio s.c. > * Written by Krzysztof Halasa <khc(a)rgstudio.com.pl> > * > * Portions (C) SBE Inc., used by permission. > diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c > index 0367d2b..a49a7c5 100644 > --- a/drivers/staging/comedi/drivers/rtd520.c > +++ b/drivers/staging/comedi/drivers/rtd520.c > @@ -59,7 +59,7 @@ Configuration options: > Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf > Example source: http://www.rtdusa.com/examples/dm/dm7520.zip > Call them and ask for the register level manual. > - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm > + PCI chip: http://www.plxtech.com/products/io/pci9080 > > Notes: > This board is memory mapped. There is some IO stuff, but it isn't needed. > diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c > index 6612247..ba8f670 100644 > --- a/drivers/staging/quickstart/quickstart.c > +++ b/drivers/staging/quickstart/quickstart.c > @@ -5,8 +5,7 @@ > * Copyright (C) 2007-2010 Angelo Arrifano <miknix(a)gmail.com> > * > * Information gathered from disassebled dsdt and from here: > - * "http://download.microsoft.com/download/9/c/5/ > - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" > + * <http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx> > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig > index 1da73ec..bb44079 100644 > --- a/drivers/uio/Kconfig > +++ b/drivers/uio/Kconfig > @@ -17,9 +17,9 @@ config UIO_CIF > depends on PCI > help > Driver for Hilscher CIF DeviceNet and Profibus cards. This > - driver requires a userspace component that handles all of the > - heavy lifting and can be found at: > - http://www.osadl.org/projects/downloads/UIO/user/cif-* > + driver requires a userspace component called cif that handles > + all of the heavy lifting and can be found at: > + <http://www.osadl.org/projects/downloads/UIO/user/> > > To compile this driver as a module, choose M here: the module > will be called uio_cif. > diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig > index 916b2b6..b71e309 100644 > --- a/drivers/usb/serial/Kconfig > +++ b/drivers/usb/serial/Kconfig > @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR > help > Say Y here if you want to connect to your HandSpring Visor, Palm > m500 or m505 through its USB docking station. See > - <http://usbvisor.sourceforge.net/> for more information on using this > + <http://usbvisor.sourceforge.net/index.php3> for more information on using this > driver. > > To compile this driver as a module, choose M here: the > @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN > and was developed with their support. You must also include > firmware to support your particular device(s). > > - See <http://misc.nu/hugh/keyspan.html> for more information. > + See <http://blemings.org/hugh/keyspan.html> for more information. > > To compile this driver as a module, choose M here: the > module will be called keyspan. > diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h > index 15a4583..28c640d 100644 > --- a/drivers/usb/serial/ftdi_sio_ids.h > +++ b/drivers/usb/serial/ftdi_sio_ids.h > @@ -46,7 +46,7 @@ > #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ > > /* OOCDlink by Joern Kaipf <joernk(a)web.de> > - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ > + * (http://www.joernonline.de/) */ > #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ > > /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ > @@ -335,7 +335,7 @@ > #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ > > /* ACT Solutions HomePro ZWave interface > - (http://www.act-solutions.com/HomePro.htm) */ > + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ > #define FTDI_ACTZWAVE_PID 0xF2D0 > > /* > @@ -366,7 +366,7 @@ > #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ > > /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ > -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ > +/* http://www.usbuirt.com/ */ > #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ > > /* CCS Inc. ICDU/ICDU40 product ID - > @@ -395,7 +395,7 @@ > */ > #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ > > -/* Inside Accesso contactless reader (http://www.insidefr.com) */ > +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */ > #define INSIDE_ACCESSO 0xFAD0 > > /* > @@ -634,14 +634,14 @@ > > /* > * JETI SPECTROMETER SPECBOS 1201 > - * http://www.jeti.com/products/sys/scb/scb1201.php > + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101 > */ > #define JETI_VID 0x0c6c > #define JETI_SPC1201_PID 0x04b2 > > /* > * FTDI USB UART chips used in construction projects from the > - * Elektor Electronics magazine (http://elektor-electronics.co.uk) > + * Elektor Electronics magazine (http://www.elektor.com/) > */ > #define ELEKTOR_VID 0x0C7D > #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ > diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c > index 297163c..0791778 100644 > --- a/drivers/usb/serial/keyspan.c > +++ b/drivers/usb/serial/keyspan.c > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://blemings.org/hugh/keyspan.html for more information. > > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h > index bf3297d..2d8baf6 100644 > --- a/drivers/usb/serial/keyspan.h > +++ b/drivers/usb/serial/keyspan.h > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://blemings.org/hugh/keyspan.html for more information. > > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h > index 3a3f5e6..d325bb8 100644 > --- a/drivers/usb/serial/mct_u232.h > +++ b/drivers/usb/serial/mct_u232.h > @@ -10,10 +10,9 @@ > * > * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No. > * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin > - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further > - * information. The properties of this device are listed at the end of this > - * file. This device is available from various distributors. I know Hana, > - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25. > + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html > + * for further information. The properties of this device are listed at the end > + * of this file. This device was used in the Dlink DSB-S25. > * > * All of the information about the device was acquired by using SniffUSB > * on Windows98. The technical details of the reverse engineering are > @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, > * embedded UART. Exhaustive documentation for these is available at: > * > * http://www.semiconductors.philips.com/pip/p87c52ubaa > - * http://www.semiconductors.philips.com/pip/pdiusbd12 > + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf > * > * Thanks to Julian Highfield for the pointer to the Philips database. > * > diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig > index 8a372ba..b356e15 100644 > --- a/drivers/usb/storage/Kconfig > +++ b/drivers/usb/storage/Kconfig > @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB > depends on USB_STORAGE > help > Support for certain Datafab CompactFlash readers. > - Datafab has a web page at <http://www.datafabusa.com/>. > + Datafab has a web page at <http://www.datafab.com/>. > > If this driver is compiled as a module, it will be named ums-datafab. > > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 8b31fdf..dc06ff1 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -49,7 +49,7 @@ menuconfig FB > You need an utility program called fbset to make full use of frame > buffer devices. Please read <file:Documentation/fb/framebuffer.txt> > and the Framebuffer-HOWTO at > - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more > + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more > information. > > Say Y here and to the driver for your graphics board below if you > @@ -955,7 +955,7 @@ config FB_EPSON1355 > Build in support for the SED1355 Epson Research Embedded RAMDAC > LCD/CRT Controller (since redesignated as the S1D13505) as a > framebuffer. Product specs at > - <http://www.erd.epson.com/vdc/html/products.htm>. > + <http://vdc.epson.com/>. > > config FB_S1D13XXX > tristate "Epson S1D13XXX framebuffer support" > @@ -966,7 +966,7 @@ config FB_S1D13XXX > help > Support for S1D13XXX framebuffer device family (currently only > working with S1D13806). Product specs at > - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> > + <http://vdc.epson.com/> > > config FB_ATMEL > tristate "AT91/AT32 LCD Controller support" > @@ -1323,7 +1323,7 @@ config FB_RADEON > don't need to choose this to run the Radeon in plain VGA mode. > > There is a product page at > - http://apps.ati.com/ATIcompare/ > + http://products.amd.com/en-us/GraphicCardResult.aspx > > config FB_RADEON_I2C > bool "DDC/I2C for ATI Radeon support" > @@ -1395,7 +1395,7 @@ config FB_ATY_CT > Say Y here to support use of ATI's 64-bit Rage boards (or other > boards based on the Mach64 CT, VT, GT, and LT chipsets) as a > framebuffer device. The ATI product support page for these boards > - is at <http://support.ati.com/products/pc/mach64/>. > + is at <http://support.ati.com/products/pc/mach64/mach64.html>. > > config FB_ATY_GENERIC_LCD > bool "Mach64 generic LCD support (EXPERIMENTAL)" > diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c > index f3d7440..3ec4923 100644 > --- a/drivers/video/arcfb.c > +++ b/drivers/video/arcfb.c > @@ -2,7 +2,6 @@ > * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board > * > * Copyright (C) 2005, Jaya Kumar <jayalk(a)intworks.biz> > - * http://www.intworks.biz/arclcd > * > * This file is subject to the terms and conditions of the GNU General Public > * License. See the file COPYING in the main directory of this archive for > diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c > index db9713b..a268cbf 100644 > --- a/drivers/video/epson1355fb.c > +++ b/drivers/video/epson1355fb.c > @@ -4,7 +4,7 @@ > * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller > * (previously known as SED1355) > * > - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html > + * Cf. http://vdc.epson.com/ > * > * > * Copyright (C) Hewlett-Packard Company. All rights reserved. > diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c > index 7293eac..7cb715d 100644 > --- a/drivers/video/fbcvt.c > +++ b/drivers/video/fbcvt.c > @@ -5,7 +5,7 @@ > * > * Based from the VESA(TM) Coordinated Video Timing Generator by > * Graham Loveridge April 9, 2003 available at > - * http://www.vesa.org/public/CVT/CVTd6r1.xls > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls > * > * This file is subject to the terms and conditions of the GNU General Public > * License. See the file COPYING in the main directory of this archive > diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c > index c77bcc6..e225c00 100644 > --- a/drivers/video/hecubafb.c > +++ b/drivers/video/hecubafb.c > @@ -10,7 +10,7 @@ > * > * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. > * This work was possible because of apollo display code from E-Ink's website > - * http://support.eink.com/community > + * http://eink.com/ > * All information used to write this code is from public material made > * available by E-Ink on its support site. Some commands such as 0xA4 > * were found by looping through cmd=0x00 thru 0xFF and supplying random > diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c > index 9b3d6e4..63ed3b7 100644 > --- a/drivers/video/metronomefb.c > +++ b/drivers/video/metronomefb.c > @@ -10,7 +10,7 @@ > * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. > * > * This work was made possible by help and equipment support from E-Ink > - * Corporation. http://support.eink.com/community > + * Corporation. http://www.eink.com/ > * > * This driver is written to be used with the Metronome display controller. > * It is intended to be architecture independent. A board specific driver > diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S > index 418fe69..f3acc19 100644 > --- a/firmware/keyspan_pda/keyspan_pda.S > +++ b/firmware/keyspan_pda/keyspan_pda.S > @@ -74,7 +74,7 @@ > * recognizes the new device ID and glues it to the real serial driver code. > * > * USEFUL DOCS: > - * EzUSB Technical Reference Manual: <http://www.anchorchips.com> > + * EzUSB Technical Reference Manual: <http://www.cypress.com/> > * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is > * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports > * use totally different registers! > diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S > index 05d99dd..0b79bbf 100644 > --- a/firmware/keyspan_pda/xircom_pgs.S > +++ b/firmware/keyspan_pda/xircom_pgs.S > @@ -74,7 +74,7 @@ > * recognizes the new device ID and glues it to the real serial driver code. > * > * USEFUL DOCS: > - * EzUSB Technical Reference Manual: <http://www.anchorchips.com> > + * EzUSB Technical Reference Manual: <http://www.cypress.com/> > * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is > * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports > * use totally different registers! > diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h > index 6bbd75c..7c232c1 100644 > --- a/fs/hostfs/hostfs.h > +++ b/fs/hostfs/hostfs.h > @@ -28,12 +28,7 @@ > * #define ATTR_KILL_SUID 2048 > * #define ATTR_KILL_SGID 4096 > * > - * and this is because they were added in 2.5 development in this patch: > - * > - * http://linux.bkbits.net:8080/linux-2.5/ > - * cset(a)3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html > - * |src/.|src/include|src/include/linux|related/include/linux/fs.h > - * > + * and this is because they were added in 2.5 development. > * Actually, they are not needed by most ->setattr() methods - they are set by > * callers of notify_change() to notify that the setuid/setgid bits must be > * dropped. > diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c > index 5bf8a04..789c625 100644 > --- a/fs/partitions/ldm.c > +++ b/fs/partitions/ldm.c > @@ -5,7 +5,7 @@ > * Copyright (c) 2001-2007 Anton Altaparmakov > * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi(a)telia.com> > * > - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ > + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads > * > * This program is free software; you can redistribute it and/or modify it under > * the terms of the GNU General Public License as published by the Free Software > diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h > index d1fb50b..374242c 100644 > --- a/fs/partitions/ldm.h > +++ b/fs/partitions/ldm.h > @@ -5,7 +5,7 @@ > * Copyright (c) 2001-2007 Anton Altaparmakov > * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi(a)telia.com> > * > - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ > + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads > * > * This program is free software; you can redistribute it and/or modify it > * under the terms of the GNU General Public License as published by the Free > diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig > index 513f431..7cd4666 100644 > --- a/fs/reiserfs/Kconfig > +++ b/fs/reiserfs/Kconfig > @@ -10,7 +10,8 @@ config REISERFS_FS > > In general, ReiserFS is as fast as ext2, but is very efficient with > large directories and small files. Additional patches are needed > - for NFS and quotas, please see <http://www.namesys.com/> for links. > + for NFS and quotas, please see > + <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links. > > It is more easily extended to have features currently found in > database and keyword search systems than block allocation based file > @@ -18,7 +19,8 @@ config REISERFS_FS > plugins consistent with our motto ``It takes more than a license to > make source code open.'' > > - Read <http://www.namesys.com/> to learn more about reiserfs. > + Read <https://reiser4.wiki.kernel.org/index.php/Main_Page> > + to learn more about reiserfs. > > Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. > > diff --git a/fs/reiserfs/README b/fs/reiserfs/README > index 14e8c9d..e2f7a26 100644 > --- a/fs/reiserfs/README > +++ b/fs/reiserfs/README > @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.) > [END LICENSING] > > Reiserfs is a file system based on balanced tree algorithms, which is > -described at http://devlinux.com/namesys. > +described at https://reiser4.wiki.kernel.org/index.php/Main_Page > > Stop reading here. Go there, then return. > > diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h > index 4086b8e..da2530e 100644 > --- a/include/crypto/gf128mul.h > +++ b/include/crypto/gf128mul.h > @@ -54,8 +54,8 @@ > > /* Comment by Rik: > * > - * For some background on GF(2^128) see for example: http://- > - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf > + * For some background on GF(2^128) see for example: > + * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-… > * > * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can > * be mapped to computer memory in a variety of ways. Let's examine > diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h > index c2eeb63..61ce641 100644 > --- a/include/linux/fdreg.h > +++ b/include/linux/fdreg.h > @@ -89,7 +89,7 @@ > /* the following commands are new in the 82078. They are not used in the > * floppy driver, except the first three. These commands may be useful for apps > * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at > - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */ > + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */ > > #define FD_PARTID 0x18 /* part id ("extended" version cmd) */ > #define FD_SAVE 0x2e /* save fdc regs for later restore */ > diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h > index 3e659ec..7d95847 100644 > --- a/include/linux/if_infiniband.h > +++ b/include/linux/if_infiniband.h > @@ -5,7 +5,7 @@ > * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD > * license, available in the LICENSE.TXT file accompanying this > * software. These details are also available at > - * <http://openib.org/license.html>. > + * <http://www.openfabrics.org/software_license.htm>. > * > * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF > diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h > index de24af7..54b8e0d 100644 > --- a/include/linux/n_r3964.h > +++ b/include/linux/n_r3964.h > @@ -4,7 +4,6 @@ > * Copyright by > * Philips Automation Projects > * Kassel (Germany) > - * http://www.pap-philips.de > * ----------------------------------------------------------- > * This software may be used and distributed according to the terms of > * the GNU General Public License, incorporated herein by reference. > diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig > index 2a72aa9..705e53e 100644 > --- a/net/ax25/Kconfig > +++ b/net/ax25/Kconfig > @@ -7,7 +7,7 @@ menuconfig HAMRADIO > bool "Amateur Radio support" > help > If you want to connect your Linux box to an amateur radio, answer Y > - here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> > + here. You want to read <http://www.tapr.org/> > and more specifically about AX.25 on Linux > <http://www.linux-ax25.org/>. > > @@ -42,7 +42,7 @@ config AX25 > check out the file <file:Documentation/networking/ax25.txt> in the > kernel source. More information about digital amateur radio in > general is on the WWW at > - <http://www.tapr.org/tapr/html/pkthome.html>. > + <http://www.tapr.org/>. > > To compile this driver as a module, choose M here: the > module will be called ax25. > @@ -89,7 +89,7 @@ config NETROM > <http://www.linux-ax25.org>. You also might want to check out the > file <file:Documentation/networking/ax25.txt>. More information about > digital amateur radio in general is on the WWW at > - <http://www.tapr.org/tapr/html/pkthome.html>. > + <http://www.tapr.org/>. > > To compile this driver as a module, choose M here: the > module will be called netrom. > @@ -108,7 +108,7 @@ config ROSE > <http://www.linux-ax25.org>. You also might want to check out the > file <file:Documentation/networking/ax25.txt>. More information about > digital amateur radio in general is on the WWW at > - <http://www.tapr.org/tapr/html/pkthome.html>. > + <http://www.tapr.org/>. > > To compile this driver as a module, choose M here: the > module will be called rose. > diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig > index 571f895..4123d5b 100644 > --- a/net/ipv4/Kconfig > +++ b/net/ipv4/Kconfig > @@ -84,7 +84,7 @@ config IP_FIB_TRIE > > An experimental study of compression methods for dynamic tries > Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. > - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ > + <http://www.csc.kth.se/~snilsson/software/dyntrie2/> > > endchoice > > @@ -555,7 +555,7 @@ config TCP_CONG_VENO > distinguishing to circumvent the difficult judgment of the packet loss > type. TCP Veno cuts down less congestion window in response to random > loss packets. > - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf > + See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186> > > config TCP_CONG_YEAH > tristate "YeAH TCP" > diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c > index 3a92a76..094e150 100644 > --- a/net/ipv4/cipso_ipv4.c > +++ b/net/ipv4/cipso_ipv4.c > @@ -9,7 +9,7 @@ > * > * The CIPSO draft specification can be found in the kernel's Documentation > * directory as well as the following URL: > - * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt > + * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt > * The FIPS-188 specification can be found at the following URL: > * http://www.itl.nist.gov/fipspubs/fip188.htm > * > diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c > index 4a8e370..d9818c5 100644 > --- a/net/ipv4/fib_trie.c > +++ b/net/ipv4/fib_trie.c > @@ -16,7 +16,7 @@ > * > * An experimental study of compression methods for dynamic tries > * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. > - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ > + * http://www.csc.kth.se/~snilsson/software/dyntrie2/ > * > * > * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson > diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig > index 1833bdb..d048275 100644 > --- a/net/ipv4/netfilter/Kconfig > +++ b/net/ipv4/netfilter/Kconfig > @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG > which can only be viewed through syslog. > > The appropriate userspace logging daemon (ulogd) may be obtained from > - <http://www.gnumonks.org/projects/ulogd/> > + <http://www.netfilter.org/projects/ulogd/index.html> > > To compile it as a module, choose M here. If unsure, say N. > > diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c > index 1eba160..00ca688 100644 > --- a/net/ipv4/tcp_illinois.c > +++ b/net/ipv4/tcp_illinois.c > @@ -6,7 +6,7 @@ > * The algorithm is described in: > * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm > * for High-Speed Networks" > - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf > + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf > * > * Implemented from description in paper and ns-2 simulation. > * Copyright (C) 2007 Stephen Hemminger <shemminger(a)linux-foundation.org> > diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c > index e663b78..bccce34 100644 > --- a/net/ipv4/tcp_input.c > +++ b/net/ipv4/tcp_input.c > @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss); > * > * The algorithm for RTT estimation w/o timestamps is based on > * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL. > - * <http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps> > + * <http://public.lanl.gov/radiant/pubs.html#DRS> > * > * More detail on this code can be found at > - * <http://www.psc.edu/~jheffner/senior_thesis.ps>, > + * <http://staff.psc.edu/jheffner/>, > * though this reference is out of date. A new paper > * is pending. > */ > diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c > index b612acf..38bc0b5 100644 > --- a/net/ipv4/tcp_veno.c > +++ b/net/ipv4/tcp_veno.c > @@ -6,7 +6,7 @@ > * "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks." > * IEEE Journal on Selected Areas in Communication, > * Feb. 2003. > - * See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf > + * See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf > */ > > #include <linux/mm.h> > diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c > index c4c885d..3fb2b73 100644 > --- a/net/netfilter/nf_conntrack_proto_tcp.c > +++ b/net/netfilter/nf_conntrack_proto_tcp.c > @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph) > /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering > in IP Filter' by Guido van Rooij. > > - http://www.nluug.nl/events/sane2000/papers.html > - http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz > + http://www.sane.nl/events/sane2000/papers.html > + http://www.darkart.com/mirrors/www.obfuscation.org/ipf/ > > The boundaries and the conditions are changed according to RFC793: > the packet must intersect the window (i.e. segments may be > diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c > index 456a1b4..854c303 100644 > --- a/sound/oss/ac97_codec.c > +++ b/sound/oss/ac97_codec.c > @@ -21,11 +21,8 @@ > * > ************************************************************************** > * > - * The Intel Audio Codec '97 specification is available at the Intel > - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/ > - * > - * The specification itself is currently available at: > - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf > + * The Intel Audio Codec '97 specification is available at: > + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf > * > ************************************************************************** > * > diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c > index c7fba53..537cfba 100644 > --- a/sound/pci/ens1370.c > +++ b/sound/pci/ens1370.c > @@ -22,7 +22,7 @@ > /* Power-Management-Code ( CONFIG_PM ) > * for ens1371 only ( FIXME ) > * derived from cs4281.c, atiixp.c and via82xx.c > - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm > + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ > * by Kurt J. Bosch > */ > > diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c > index 4677492..400f9eb 100644 > --- a/sound/pci/intel8x0.c > +++ b/sound/pci/intel8x0.c > @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich > * Intel 82443MX running a 100MHz processor system bus has a hardware bug, > * which aborts PCI busmaster for audio transfer. A workaround is to set > * the pages as non-cached. For details, see the errata in > - * http://www.intel.com/design/chipsets/specupdt/245051.htm > + * http://download.intel.com/design/chipsets/specupdt/24505108.pdf > */ > static void fill_nocache(void *buf, int size, int nocache) > { >

2 3

[alsa-devel] TASCAM US-144mkII Driver
by Michael Niemeck 28 Sep '10

28 Sep '10

Common consensus in the forums seems to be that the mkII versions of the TASCAM 122 and 144 have different hard- and/or software than their respective predecessors, and won't work with the current ALSA drivers. At least the latter I can confirm for my US-144mkII. Lacking the resources to modify the existing driver to work with the above interface, let alone write a new one, I wanted to ask if anyone of the active ALSA developers would be willing to (or is even already in the process of) write or modify a driver for the new TASCAMs. I would be more than willing to contribute to a bounty, if such a thing is common or at least accepted in the ALSA community, and according to this post (http://article.gmane.org/gmane.linux.alsa.user/34586) TASCAM is ready to support such a project with demo units. I would also be willing to function as a tester, of course. Still hoping, Mike ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

1 0

[alsa-devel] MIDI utility amidicat and alsa-utils
by Josh Lehan 28 Sep '10

28 Sep '10

Hello. Back at the start of this year, I was looking for a way to send arbitrary data into or out of the ALSA MIDI subsystem from the command line. Upon failing to find a solution, I wrote a little utility program to do just that, called "amidicat": http://krellan.com/amidicat/ When the idea was first talked about, Takashi Iwai mentioned that it might be useful to have in alsa-utils. I'm wondering if this is still the case? If so, what would be necessary to adapt my program to fit in and become a well-behaved member of alsa-utils? Does it need to compile on other platforms besides Linux, be internationalized, etc.? Josh

1 0

Re: [alsa-devel] [RFC v4]update broken web addresses in the kernel.
by Justin P. Mattock 28 Sep '10

28 Sep '10

On 09/27/2010 09:15 PM, Finn Thain wrote: > > On Mon, 27 Sep 2010, Justin P. Mattock wrote: > >> alright.. I'll redu this... remove the brackets, and fix up the rest.. >> one note is: >> http://dri.freedesktop.org/wiki/Documentation >> this address is already there.. > > Right you are. > >> probably best to just leave the sourceforge >> address and use the webarchive and/or if theirs a >> proper address for the sourceforge dri.. > > I didn't find a sensible address for the sourceforge stuff now that > indexes are turned off for /doc/. > > I agree, best just to leave it as is, since it is in the archive. > > Finn > >> >> Justin P. Mattock >> >> > alright... resent, hopefully I didnt miss any of them... eyes are going out of whack over here.. Justin P. Mattock

1 0

Re: [alsa-devel] [RFC v4]update broken web addresses in the kernel.
by Justin P. Mattock 28 Sep '10

28 Sep '10

On 09/27/2010 07:59 PM, Finn Thain wrote: > > On Sun, 26 Sep 2010, Justin P. Mattock wrote: > >> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c >> index 033e150..d7d9a78 100644 >> --- a/drivers/char/apm-emulation.c >> +++ b/drivers/char/apm-emulation.c >> @@ -8,7 +8,7 @@ >> * (APM) BIOS Interface Specification, Revision 1.2, February 1996. >> * >> * [This document is available from Microsoft at: >> - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] >> + * http://www.microsoft.com/whdc/archive/amp_12.mspx] >> */ > > > Can we lose the brackets? > > >> #include<linux/module.h> >> #include<linux/poll.h> > >> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig >> index 280c9b5..b2bd5fb 100644 >> --- a/drivers/firmware/Kconfig >> +++ b/drivers/firmware/Kconfig >> @@ -73,8 +73,8 @@ config EFI_PCDP >> on how the driver discovers devices. >> >> You must also enable the appropriate drivers (serial, VGA, etc.) >> - >> - See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> >> + See [DIG64_HCDPv20_042804.pdf] available from > > > What are the square brackets for? > > >> + <http://www.dig64.org/specifications/> >> >> config DELL_RBU >> tristate "BIOS update support for DELL systems via sysfs" > >> diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h >> index ce910d6..777d928 100644 >> --- a/drivers/firmware/pcdp.h >> +++ b/drivers/firmware/pcdp.h >> @@ -1,8 +1,8 @@ >> /* >> * Definitions for PCDP-defined console devices >> * >> - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf >> - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf >> + * For [v1.0a: DIG64_HCDPv10a_01.pdf] [v2.0: DIG64_PCDPv20.pdf] > > > For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.), > > >> + * Please see<http://www.dig64.org/specifications/> > > > please see<http://www.dig64.org/specifications/> > > >> * >> * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. >> * Khalid Aziz<khalid.aziz(a)hp.com> >> diff --git a/drivers/gpu/drm/README.drm b/drivers/gpu/drm/README.drm >> index b5b3327..bf29068 100644 >> --- a/drivers/gpu/drm/README.drm >> +++ b/drivers/gpu/drm/README.drm >> @@ -28,7 +28,7 @@ ways: >> Documentation on the DRI is available from: >> http://dri.freedesktop.org/wiki/Documentation >> http://sourceforge.net/project/showfiles.php?group_id=387 >> - http://dri.sourceforge.net/doc/ >> + http://dri.sourceforge.net/doc/DRIuserguide.html > > > http://dri.freedesktop.org/wiki/Documentation > > >> >> For specific information about kernel-level support, see: >> > >> diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c >> index 88121c5..e74753e 100644 >> --- a/drivers/input/mouse/touchkit_ps2.c >> +++ b/drivers/input/mouse/touchkit_ps2.c >> @@ -22,7 +22,7 @@ >> * Based upon touchkitusb.c >> * >> * Vendor documentation is available in support section of: >> - * http://www.egalax.com.tw/ >> + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.p… > > > The comment text needs to be fixed also. > > >> */ >> >> #include<linux/kernel.h> > >> diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c >> index 472907d..08023f1 100644 >> --- a/drivers/media/dvb/frontends/mt312.c >> +++ b/drivers/media/dvb/frontends/mt312.c >> @@ -20,8 +20,9 @@ >> Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. >> >> References: >> - http://products.zarlink.com/product_profiles/MT312.htm >> - http://products.zarlink.com/product_profiles/SL1935.htm >> + http://www.zarlink.com/zarlink/hs/71.htm >> + http://www.chipcatalog.com/Zarlink/MT312.htm >> + http://www.chipcatalog.com/Zarlink/SL1935.htm > > > There's no need for links to chipcatalog.com. As I said in the previous > review, we have search engines for finding datasheets. Besides, the old > links are in the web archive (complete with PDFs) so there's no need to > remove them. > > >> */ >> >> #include<linux/delay.h> >> diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h >> index 29e3bb5..6d32e3f 100644 >> --- a/drivers/media/dvb/frontends/mt312.h >> +++ b/drivers/media/dvb/frontends/mt312.h >> @@ -19,8 +19,9 @@ >> Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. >> >> References: >> - http://products.zarlink.com/product_profiles/MT312.htm >> - http://products.zarlink.com/product_profiles/SL1935.htm >> + http://www.zarlink.com/zarlink/hs/71.htm >> + http://www.chipcatalog.com/Zarlink/MT312.htm >> + http://www.chipcatalog.com/Zarlink/SL1935.htm > > > Same here. > > >> */ >> >> #ifndef MT312_H > >> --- a/drivers/media/video/gspca/gspca.c >> +++ b/drivers/media/video/gspca/gspca.c >> @@ -2338,7 +2338,7 @@ EXPORT_SYMBOL(gspca_resume); >> >> /* auto gain and exposure algorithm based on the knee algorithm described here: >> http://ytse.tricolour.net/docs/LowLightOptimization.html >> - >> + http://81.209.78.62:8080/docs/LowLightOptimization.html > > > This is in the web archive. > > >> Returns 0 if no changes were made, 1 if the gain and or exposure settings >> where changed. */ >> int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum, > >> index 701d942..142efd2 100644 >> --- a/drivers/mtd/maps/Kconfig >> +++ b/drivers/mtd/maps/Kconfig >> @@ -256,8 +256,7 @@ config MTD_DILNETPC >> depends on X86&& MTD_CONCAT&& MTD_PARTITIONS&& MTD_CFI_INTELEXT&& BROKEN >> help >> MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP". >> - For details, see<http://www.ssv-embedded.de/ssv/pc104/p169.htm> >> - and<http://www.ssv-embedded.de/ssv/pc104/p170.htm> >> + For details, see<http://www.dilnetpc.com/> > > > This is in the web archive. This removes information. > > >> >> config MTD_DILNETPC_BOOTSIZE >> hex "Size of DIL/Net PC flash boot partition" > >> diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c >> index 0713e3a..114899b 100644 >> --- a/drivers/mtd/maps/dilnetpc.c >> +++ b/drivers/mtd/maps/dilnetpc.c >> @@ -19,8 +19,7 @@ >> * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash >> * ROM (Intel 28F016S3) and 8 megs of DRAM, the ADNP version has 4 megs >> * flash and 16 megs of RAM. >> - * For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm >> - * and http://www.ssv-embedded.de/ssv/pc104/p170.htm >> + * For details, see http://www.dilnetpc.com/ > > > Same. > > >> */ >> >> #include<linux/module.h> > >> index 49aac70..f4523cd 100644 >> --- a/drivers/net/hamachi.c >> +++ b/drivers/net/hamachi.c >> @@ -20,9 +20,6 @@ >> >> Support and updates available at >> http://www.scyld.com/network/hamachi.html >> - [link no longer provides useful info -jgarzik] >> - or >> - http://www.parl.clemson.edu/~keithu/hamachi.html > > > Why? > > >> >> */ >> > >> index 6af6c83..0723c9f 100644 >> --- a/drivers/staging/comedi/drivers/daqboard2000.c >> +++ b/drivers/staging/comedi/drivers/daqboard2000.c >> @@ -51,7 +51,7 @@ Configuration options: >> for the card, and here are the findings so far. >> >> 1. A good document that describes the PCI interface chip is found at: >> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf >> + [9080db-106.pdf] http://www.plxtech.com/products/io/pci9080 > > > Comments are supposed to be human readable text. Square brackets don't > quote filenames by any convention I'm aware of (?) > I'd suggest: > > A good document that describes the PCI interface chip is 9080db-106.pdf > available from http://www.plxtech.com/products/io/pci9080 > > >> >> 2. The initialization done so far is: >> a. program the FPGA (windows code sans a lot of error messages) > >> diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c >> index 28ccab4..fc853a5 100644 >> --- a/drivers/video/vga16fb.c >> +++ b/drivers/video/vga16fb.c >> @@ -2,7 +2,7 @@ >> * linux/drivers/video/vga16.c -- VGA 16-color framebuffer driver >> * >> * Copyright 1999 Ben Pfaff<pfaffben(a)debian.org> and Petr Vandrovec<VANDROVE(a)vc.cvut.cz> >> - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm >> + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm > > > The old link is in the web archive, you needn't remove it. Add the new one > if you wish. > > >> * Based on VESA framebuffer (c) 1998 Gerd Knorr<kraxel(a)goldbach.in-berlin.de> >> * >> * This file is subject to the terms and conditions of the GNU General >> diff --git a/drivers/video/vgastate.c b/drivers/video/vgastate.c >> index b91c466..f4043f8 100644 >> --- a/drivers/video/vgastate.c >> +++ b/drivers/video/vgastate.c >> @@ -5,7 +5,7 @@ >> * >> * Copyright history from vga16fb.c: >> * Copyright 1999 Ben Pfaff and Petr Vandrovec >> - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm >> + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm > > > Same. > > >> * Based on VESA framebuffer (c) 1998 Gerd Knorr >> * >> * This file is subject to the terms and conditions of the GNU General >> diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h >> index 88b4589..39ef699 100644 >> --- a/include/linux/ixjuser.h >> +++ b/include/linux/ixjuser.h >> @@ -25,7 +25,7 @@ >> * Mike Preston,<mpreston(a)quicknet.net> >> * >> * More information about the hardware related to this driver can be found >> - * at our website: http://www.quicknet.net >> + * at our website: http://blemings.org/hugh/keyspan.html > > > This appears to have been fat-fingered. No patch needed. > > >> * >> * Fixes: >> * > >> diff --git a/include/video/vga.h b/include/video/vga.h >> index b49a512..2b8691f 100644 >> --- a/include/video/vga.h >> +++ b/include/video/vga.h >> @@ -5,7 +5,7 @@ >> * >> * Copyright history from vga16fb.c: >> * Copyright 1999 Ben Pfaff and Petr Vandrovec >> - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm >> + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm > > > See above. > > Thanks. > > Finn > alright.. I'll redu this... remove the brackets, and fix up the rest.. one note is: http://dri.freedesktop.org/wiki/Documentation this address is already there.. probably best to just leave the sourceforge address and use the webarchive and/or if theirs a proper address for the sourceforge dri.. Justin P. Mattock

1 0

Re: [alsa-devel] [RFC v4]update broken web addresses in the kernel.
by Justin P. Mattock 28 Sep '10

28 Sep '10

On 09/27/2010 06:37 PM, Finn Thain wrote: > > On Mon, 27 Sep 2010, Justin P. Mattock wrote: > >> On 09/27/2010 09:03 AM, Joe Perches wrote: >>> On Mon, 2010-09-27 at 11:10 -0400, John W. Linville wrote: >>>> On Sun, Sep 26, 2010 at 11:31:15AM -0700, Justin P. Mattock wrote: >>>>> Below is an updated patch from the original fixing broken web >>>>> addresses in the kernel. Thanks for all the help and info on this >>>>> to everybody.. Hopefully I didnt miss any of them(if so let me >>>>> know, and I'll resend). >>>> Changing a URL for a relocated page is one thing, but removing links >>>> isn't necessarily a great idea. Even if the site is technically >>>> gone, it may be possible to find information e.g through the >>>> Internet Archive Wayback Machine. >>> >>> Perhaps it'd be better to scrape the contents of the various web >>> pages, collect them somewhere like wiki.kernel.org and encourage >>> others to put new contributions in that site. > > The copyright problem aside, this might be a good idea for material not > already archived but I don't think it makes sense to start a new > archive when archive.org (or other) has the information. > > And which version(s) do you scrape? I discussed some problems with > changing URLs in another thread: http://lkml.org/lkml/2010/9/22/22 > > Anyway, without knowing what future archive(s) would be available or > relevant to any given URL in the future, I think the best we might do is a > "Retrieved on YYYY-MM-DD" qualification for new URLs. > >> >> >> yeah I think somebody was saying something about having a separate file, >> with all the web addresses in them or something...In any case, up to you >> guys.. > > I don't see how moving the addresses would help. > And would it not make the information harder to find? > > Finn > depends on how the setup is.. I was thinking of having some kind of letter/number scheme i.e. (A-13) in the comment, then in the file with all the addresses under article "A" 13th address down you would have the web address.(but keep in mind that's just speculation..) Justin P. Mattock

1 0

[alsa-devel] [PATCH] ALSA: hda - Add quirk for another Acer laptop with a CX20585 codec
by Luke Yelavich 28 Sep '10

28 Sep '10

From: Luke Yelavich <luke.yelavich(a)canonical.com> BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/647374 Set another Acer laptop (SSID 1025:043d) to use CXT5066_IDEAPAD Cc: stable(a)kernel.org Signed-off-by: Luke Yelavich <luke.yelavich(a)canonical.com> --- sound/pci/hda/patch_conexant.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index a6c68cb..80cc74b 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3094,6 +3094,7 @@ static const char *cxt5066_models[CXT5066_MODELS] = { static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x040a, "Acer", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x1025, 0x043d, "Acer", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell", CXT5066_DELL_LAPTOP), -- 1.7.1

1 0

[alsa-devel] [PATCH] ASoC: Fix masking of WM8962 FLL1 register
by Mark Brown 28 Sep '10

28 Sep '10

When configuring the FLL we preserve the FLL enable configuration in order to allow us to reenable the FLL after configuration but we do not clear the other bits in the register, causing old configuration to be preserved. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8962.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 7de5194..12286d6 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -1342,7 +1342,7 @@ static int wm8962_set_fll(struct snd_soc_dai *dai, int fll_id, int source, struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); struct _fll_div fll_div; int ret; - int fll1 = snd_soc_read(codec, WM8962_FLL_CONTROL_1); + int fll1 = snd_soc_read(codec, WM8962_FLL_CONTROL_1) & WM8962_FLL_ENA; /* Any change? */ if (source == wm8962->fll_src && Fref == wm8962->fll_fref && -- 1.7.1

1 0

[alsa-devel] davinci-i2c,pcm updates
by Troy Kisky 27 Sep '10

27 Sep '10

This patch set is against git://git.alsa-project.org/alsa-kernel.git but the last patch in series won't compile until the sram allocator patch is available.

8 44

[alsa-devel] mic on macbook air
by Reimundo 27 Sep '10

27 Sep '10

Hello list, from time to time I spend some time trying to get the mic working on a Macbook air 2,1. I tried looking at the relevant info from the corresponding kernel extensions on mac os X. The codec has "Vendor Id: 0x10ec0885" so the relevant part of the info.plist on mac os X reads <dict> <key>MicAttributes</key> <integer>28</integer> <key>MicInfo</key> <string>Sampled on rising edge</string> <key>NodeID</key> <integer>39</integer> <key>PinConfigDefault</key> <integer>2426405136</integer> </dict> Which tells me nothing. In particular I don't have a node 0x27=39 (at least not that hda-analyzer sees) so it's not surprising that if I send the corresponding verbs to set_config_default I don't get anything. Also, I don't see how setting the pinconfigdefault could affect my not having the mic working (anyway I tried setting those pinconfigdefaults that put the node as a fixed mic on all nids 0x19-0x1c to no avail) As for the sampled on rising edge, I don't know how to use this info. any ideas? Thanks, R.

4 6

Re: [alsa-devel] [RFC v4]update broken web addresses in the kernel.
by Justin P. Mattock 27 Sep '10

27 Sep '10

On 09/27/2010 09:03 AM, Joe Perches wrote: > On Mon, 2010-09-27 at 11:10 -0400, John W. Linville wrote: >> On Sun, Sep 26, 2010 at 11:31:15AM -0700, Justin P. Mattock wrote: >>> Below is an updated patch from the original fixing broken web addresses in the kernel. >>> Thanks for all the help and info on this to everybody.. >>> Hopefully I didnt miss any of them(if so let me know, and I'll resend). >> Changing a URL for a relocated page is one thing, but removing links >> isn't necessarily a great idea. Even if the site is technically >> gone, it may be possible to find information e.g through the Internet >> Archive Wayback Machine. > > Perhaps it'd be better to scrape the contents of the various > web pages, collect them somewhere like wiki.kernel.org and > encourage others to put new contributions in that site. > > > > yeah I think somebody was saying something about having a separate file, with all the web addresses in them or something...In any case, up to you guys.. Justin P. Mattock

1 0

Re: [alsa-devel] [RFC v4]update broken web addresses in the kernel.
by Justin P. Mattock 27 Sep '10

27 Sep '10

On 09/27/2010 08:10 AM, John W. Linville wrote: > On Sun, Sep 26, 2010 at 11:31:15AM -0700, Justin P. Mattock wrote: >> Below is an updated patch from the original fixing broken web addresses in the kernel. >> Thanks for all the help and info on this to everybody.. >> Hopefully I didnt miss any of them(if so let me know, and I'll resend). > > Changing a URL for a relocated page is one thing, but removing links > isn't necessarily a great idea. Even if the site is technically > gone, it may be possible to find information e.g through the Internet > Archive Wayback Machine. > >> diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c >> index e8e2d0f..ba10b07 100644 >> --- a/drivers/net/wireless/orinoco/main.c >> +++ b/drivers/net/wireless/orinoco/main.c >> @@ -17,7 +17,6 @@ >> * >> * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus<andy >> * AT fasta.fh-dortmund.de> >> - * http://www.stud.fh-dortmund.de/~andy/wvlan/ >> * >> * The contents of this file are subject to the Mozilla Public License >> * Version 1.1 (the "License"); you may not use this file except in > > http://web.archive.org/web/20070716051348/http://www.stud.fh-dortmund.de/~a… > most of the urls that are not removed that are still broken work with the wayback machine..(from what I remember this one would give me a server error(reason for removing), but it doesn't look so). Thanks for this, I'll change that up. Justin P. Mattock

1 0

[alsa-devel] ASoC updates for 2.6.37
by Mark Brown 27 Sep '10

27 Sep '10

The following changes since commit 3e13f65e3aa51fc7009afc554683a0b182c057f5: ASoC: adapt multi-componentism again (2010-09-23 07:41:37 +0200) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37 Dimitris Papastamos (3): ASoC: Delegate to hw specific read for volatile registers ASoC: Fix incorrect parameter to snd_soc_codec_volatile_register ASoC: WM8985: Remove unneeded declaration. Mark Brown (8): ASoC: Remove unneeded WM9713 header include from SMDK WM9713 driver ASoC: Clarify naming for SMDK WM9713 driver ASoC: Clean up the CODEC device as well as the board for SMDK WM9713 ASoC: Convert s3c-ac97 to pr_() macros ASoC: Add debug logging for s3c-ac97 resets ASoC: Clean up AC'97 glue driver ASoC: Add Jassi Brar as Samsung maintainer Merge branch 'for-2.6.36' into for-2.6.37 MAINTAINERS | 6 +++ sound/soc/codecs/ac97.c | 14 +++----- sound/soc/codecs/wm8985.c | 2 - sound/soc/s3c24xx/s3c-ac97.c | 14 +++++--- sound/soc/s3c24xx/smdk_wm9713.c | 4 +- sound/soc/soc-cache.c | 76 +++++++++++++++++++++++++------------- 6 files changed, 72 insertions(+), 44 deletions(-)

3 5

[alsa-devel] ASoC update for 2.6.36
by Mark Brown 27 Sep '10

27 Sep '10

The following changes since commit 0077ca0b5c986477e33451b797b6e7dc92a8bbc0: ASoC: Fix multi-componentism (2010-09-22 18:47:40 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.36 Mark Brown (1): ASoC: Add Jassi Brar as Samsung maintainer MAINTAINERS | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)

2 1

[alsa-devel] [PATCH] ASoC: Add Jassi Brar as Samsung maintainer
by Mark Brown 27 Sep '10

27 Sep '10

Since Jassi is doing so much good work and can offer such good review for the Samsung CPU support add an entry for the Samsung ASoC drivers to MAINTAINERS listing him. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg(a)slimlogic.co.uk> --- MAINTAINERS | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b5b8baa..f51409b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4965,6 +4965,12 @@ F: drivers/media/common/saa7146* F: drivers/media/video/*7146* F: include/media/*7146* +SAMSUNG AUDIO (ASoC) DRIVERS +M: Jassi Brar <jassi.brar(a)samsung.com> +L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) +S: Supported +F: sound/soc/s3c24xx + TLG2300 VIDEO4LINUX-2 DRIVER M: Huang Shijie <shijie8(a)gmail.com> M: Kang Yong <kangyong(a)telegent.com> -- 1.7.1

3 8

Re: [alsa-devel] [RFC 1/3 v3]update web addresses in the kernel
by Justin P. Mattock 26 Sep '10

26 Sep '10

alright(going to top post because of how long this is). I will go and make the changes and resend it out... On 09/26/2010 02:43 AM, Finn Thain wrote: > > Hi Justin, > > Some comments on your latest patch follow. > > > On Fri, 24 Sep 2010, Justin P. Mattock wrote: > >> --- a/drivers/ata/pata_it821x.c >> +++ b/drivers/ata/pata_it821x.c >> @@ -16,7 +16,7 @@ >> * Based in part on the ITE vendor provided SCSI driver. >> * >> * Documentation available from >> - * http://www.ite.com.tw/pc/IT8212F_V04.pdf >> + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91 > > The existence of the pdf could be useful information when one needs to > locate a copy. I think the filename needs to be retained. > > > >> * Some other documents are NDA. >> * >> * The ITE8212 isn't exactly a standard IDE controller. It has two > >> diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c >> index a2fa1fe..adb6574 100644 >> --- a/drivers/edac/i82443bxgx_edac.c >> +++ b/drivers/edac/i82443bxgx_edac.c >> @@ -12,7 +12,7 @@ >> * 440GX fix by Jason Uhlenkott<juhlenko(a)akamai.com>. >> * >> * Written with reference to 82443BX Host Bridge Datasheet: >> - * http://www.intel.com/design/chipsets/440/documentation.htm >> + * http://ark.intel.com/Product.aspx?id=27151 > > That's the wrong document. It refers to processor number 440 not the *440 > chipsets. > > Google offers this link: > http://download.intel.com/design/chipsets/datashts/29063301.pdf > > >> * references to this document given in []. >> * >> * This module doesn't support the 440LX, but it may be possible to >> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig >> index 280c9b5..aec5691 100644 >> --- a/drivers/firmware/Kconfig >> +++ b/drivers/firmware/Kconfig >> @@ -74,7 +74,8 @@ config EFI_PCDP >> >> You must also enable the appropriate drivers (serial, VGA, etc.) >> >> - See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> >> + See DIG64_HCDPv20_042804.pdf available from >> + <http://www.dig64.org/specifications/> > > Can you do the same for IT8212F_V04.pdf above? > > >> >> config DELL_RBU >> tristate "BIOS update support for DELL systems via sysfs" > >> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c >> index 949326d..f3e9d45 100644 >> --- a/drivers/gpu/drm/drm_modes.c >> +++ b/drivers/gpu/drm/drm_modes.c >> @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); >> * according to the hdisplay, vdisplay, vrefresh. >> * It is based from the VESA(TM) Coordinated Video Timing Generator by >> * Graham Loveridge April 9, 2003 available at >> - * http://www.vesa.org/public/CVT/CVTd6r1.xls >> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls >> * >> * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. >> * What I have done is to translate it by using integer calculation. > >> /* >> * Keymap for ATCom AU-100 >> - * http://www.atcom.cn/En_products_AU100.html >> + * http://www.atcom.cn/products.html >> * http://www.packetizer.com/products/au100/ >> * http://www.voip-info.org/wiki/view/AU-100 >> * >> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig >> index c714ca2..5e98430 100644 >> --- a/drivers/input/mouse/Kconfig >> +++ b/drivers/input/mouse/Kconfig >> @@ -27,10 +27,7 @@ config MOUSE_PS2 >> >> Synaptics, ALPS or Elantech TouchPad users might be interested >> in a specialized Xorg/XFree86 driver at: >> - <http://w1.894.telia.com/~u89404340/touchpad/index.html> >> - and a new version of GPM at: >> - <http://www.geocities.com/dt_or/gpm/gpm.html> > > > This one is in the web archive so it might be a good idea to keep the URL? > > >> - to take advantage of the advanced features of the touchpad. >> + <http://xorg.freedesktop.org/archive/individual/driver/> >> >> If unsure, say Y. >> > >> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c >> index abd64e8..43eea3a 100644 >> --- a/drivers/media/video/cx23885/cx23885-417.c >> +++ b/drivers/media/video/cx23885/cx23885-417.c >> @@ -7,7 +7,7 @@ >> * (c) 2008 Steven Toth<stoth(a)linuxtv.org> >> * - CX23885/7/8 support >> * >> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), >> + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/), > > How about, > > + * Includes parts from the ivtv driver<http://sourceforge.net/projects/ivtv/> > > >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by >> diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c >> index e46e1ce..821766e 100644 >> --- a/drivers/media/video/cx88/cx88-blackbird.c >> +++ b/drivers/media/video/cx88/cx88-blackbird.c >> @@ -9,7 +9,7 @@ >> * (c) 2005-2006 Mauro Carvalho Chehab<mchehab(a)infradead.org> >> * - video_ioctl2 conversion >> * >> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), >> + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/), > > > Same here. > > >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by > >> diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c >> index 4d6a64c..8e201b8 100644 >> --- a/drivers/mtd/ftl.c >> +++ b/drivers/mtd/ftl.c >> @@ -51,7 +51,7 @@ >> >> Use of the FTL format for non-PCMCIA applications may be an >> infringement of these patents. For additional information, >> - contact M-Systems (http://www.m-sys.com) directly. >> + contact M-Systems directly. [M-Systems since acquired by Sandisk.]. > > > An entire sentence within parentheses is usually written like this: > > + contact M-Systems directly. [M-Systems since acquired by Sandisk.] > > >> >> ======================================================================*/ >> #include<linux/mtd/blktrans.h> > >> diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c >> index db1dfc5..48894dc 100644 >> --- a/drivers/mtd/nand/cafe_nand.c >> +++ b/drivers/mtd/nand/cafe_nand.c >> @@ -2,7 +2,7 @@ >> * Driver for One Laptop Per Child ?CAF?? controller, aka Marvell 88ALP01 >> * >> * The data sheet for this device can be found at: >> - * http://www.marvell.com/products/pcconn/88ALP01.jsp >> + * http://www.marvell.com/products/pc_connectivity/88alp01/ > > No, it isn't there any longer. It is here though: > > http://wiki.laptop.org/go/Datasheets > > >> * >> * Copyright ? 2006 Red Hat, Inc. >> * Copyright ? 2006 David Woodhouse<dwmw2(a)infradead.org> >> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig >> index 2cc81a5..99fb1f6 100644 >> --- a/drivers/net/Kconfig >> +++ b/drivers/net/Kconfig > >> @@ -1541,7 +1541,7 @@ config FEALNX >> help >> Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet >> cards. Specifications and data at >> - <http://www.myson.com.hk/mtd/datasheet/>. >> + <http://www.datasheetarchive.com/datasheet-pdf/022/DSA00384882.html>. > > Links to the datasheetarchive are probably redundant. We have search > engines for that. Also, there are three devices supported by this driver > and your link is only good for one of them, so searching is likely to be > needed anyway. > > The site is actually http://www.myson.com.tw/ but there's no product > information there any longer. I'd suggest this (also correcting the typo): > > - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet > - cards. Specifications and data at > -<http://www.myson.com.hk/mtd/datasheet/>. > + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet > + cards.<http://www.myson.com.tw/> > > > >> >> config NATSEMI >> tristate "National Semiconductor DP8381x series PCI Ethernet support" > >> http://www.national.com/pf/DP/DP83840A.html >> > >> index c683f77..230158b 100644 >> --- a/drivers/net/pcmcia/3c574_cs.c >> +++ b/drivers/net/pcmcia/3c574_cs.c >> @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. >> V. References >> >> http://www.scyld.com/expert/NWay.html >> -http://www.national.com/pf/DP/DP83840.html >> +http://www.national.com/opf/DP/DP83840A.html#Overview > > No need for the "#Overview" anchor. > > >> >> Thanks to Terry Murphy of 3Com for providing development information for >> earlier 3Com products. > >> diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h >> index 150511a..45f5323 100644 >> --- a/drivers/net/sis900.h >> +++ b/drivers/net/sis900.h >> @@ -7,7 +7,7 @@ >> * preliminary Rev. 1.0 Nov. 10, 1998 >> * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, >> * preliminary Rev. 1.0 Jan. 18, 1998 >> - * http://www.sis.com.tw/support/databook.htm >> + * http://www.sis.com/elibrary/elibrary_index00.htm > > The old URL is in the web archive, complete with the relevant datasheets. > But if I follow your URL, I get nothing useful. > > >> */ >> >> /* > >> index b0342a5..024fccc 100644 >> --- a/drivers/net/wireless/p54/Kconfig >> +++ b/drivers/net/wireless/p54/Kconfig >> @@ -8,7 +8,7 @@ config P54_COMMON >> also need to be enabled in order to support any devices. >> >> These devices require softmac firmware which can be found at >> - http://prism54.org/ >> + http://wireless.kernel.org/en/users/Drivers/p54 > > > The convention seems to be angle brackets around URLS in Kconfig. > > >> >> If you choose to build a module, it'll be called p54common. >> >> @@ -20,7 +20,7 @@ config P54_USB >> This driver is for USB isl38xx based wireless cards. >> >> These devices require softmac firmware which can be found at >> - http://prism54.org/ >> + http://wireless.kernel.org/en/users/Drivers/p54 > > > Same. > >> >> If you choose to build a module, it'll be called p54usb. >> >> @@ -34,7 +34,7 @@ config P54_PCI >> supported by the fullmac driver/firmware. >> >> This driver requires softmac firmware which can be found at >> - http://prism54.org/ >> + http://wireless.kernel.org/en/users/Drivers/p54 >> >> If you choose to build a module, it'll be called p54pci. >> > > Same. > > >> @@ -205,7 +205,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir >> /* >> * VIA Apollo KT133 needs PCI latency patch >> * Made according to a windows driver based patch by George E. Breese >> - * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm >> + * see PCI Latency Adjust on http://www.georgebreese.com/net/software/#PCI > > > The old link is in the web archive, but yours is also useful. > Can't we have both? > > >> * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for >> * the info on which Mr Breese based his work. >> * > >> --- a/drivers/scsi/Kconfig >> +++ b/drivers/scsi/Kconfig >> @@ -949,7 +949,7 @@ config SCSI_IPS >> depends on PCI&& SCSI >> ---help--- >> This is support for the IBM ServeRAID hardware RAID controllers. >> - See<http://www.developer.ibm.com/welcome/netfinity/serveraid.html> >> + See<http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndoci…> > > The old URL is in the web archive, complete with downloads. Please keep > it around as there may be no other way to find that material. > > >> for more information. If this driver does not work correctly >> without modification please contact the author by email at >> <ipslinux(a)adaptec.com>. > >> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c >> index b02bdc6..705f541 100644 >> --- a/drivers/scsi/scsi_debug.c >> +++ b/drivers/scsi/scsi_debug.c >> @@ -555,8 +555,8 @@ static int inquiry_evpd_84(unsigned char * arr) >> static int inquiry_evpd_85(unsigned char * arr) >> { >> int num = 0; >> - const char * na1 = "https://www.kernel.org/config"; >> - const char * na2 = "http://www.kernel.org/log"; >> + const char * na1 = "https://www.kernel.org"; >> + const char * na2 = "http://www.kernel.org"; > > > Why? These are deliberately fake, and deliberately different. > > BTW, a URL like http://www.kernel.org/ is supposed to have the slash at > the end. > > >> int plen, olen; >> >> arr[num++] = 0x1; /* lu, storage config */ >> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c >> index 24110f6..41a3ed8 100644 >> --- a/drivers/serial/8250.c >> +++ b/drivers/serial/8250.c >> @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up) >> /* >> * Exar ST16C2550 "A2" devices incorrectly detect as >> * having an EFR, and report an ID of 0x0201. See >> - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf >> + * http://linux.derkeiler.com/pdf/Mailing-Lists/Kernel/2004-11/4812.pdf > > > This link is better since it has the entire thread: > http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html > > >> */ >> if (autoconfig_read_divisor_id(up) == 0x0201&& size_fifo(up) == 16) >> return 1; > >> diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README >> index 96b9717..b6f77c5 100644 >> --- a/drivers/staging/asus_oled/README >> +++ b/drivers/staging/asus_oled/README >> @@ -2,7 +2,7 @@ >> Driver for Asus OLED display present in some Asus laptops. >> >> The code of this driver is based on 'asusoled' program taken from >> - https://launchpad.net/asusoled/. I just wanted to have a simple >> + http://lapsus.berlios.de/asus_oled.html. I just wanted to have a simple > > > The trailing "." isn't helping. Put it inside angle brackets. > > >> kernel driver for controlling this device, but I didn't know how >> to do that. Now I know ;) Also, that program can not be used >> with usbhid loaded, which means no USB mouse/keyboard while >> diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c >> index 5b279fb..1cb2116 100644 >> --- a/drivers/staging/asus_oled/asus_oled.c >> +++ b/drivers/staging/asus_oled/asus_oled.c >> @@ -24,7 +24,7 @@ >> * >> * >> * Asus OLED support is based on asusoled program taken from >> - * https://launchpad.net/asusoled/. >> + * http://lapsus.berlios.de/asus_oled.html. > > Same here. > > >> * >> * >> */ >> diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c >> index ced346a..e4cf861 100644 >> --- a/drivers/staging/comedi/drivers/cb_pcimdas.c >> +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c >> @@ -37,7 +37,7 @@ Configuration Options: >> Developed from cb_pcidas and skel by Richard Bytheway (mocelet(a)sucs.org). >> Only supports DIO, AO and simple AI in it's present form. >> No interrupts, multi channel or FIFO AI, although the card looks like it could support this. >> -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details. >> +See http://www.mccdaq.com/specs.aspx for more details. > > This loses information. Your patch removes the filename. For example, > Googling that filename gives this: > > http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf > > >> */ >> >> #include "../comedidev.h" >> diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c >> index 6af6c83..ba5a980 100644 >> --- a/drivers/staging/comedi/drivers/daqboard2000.c >> +++ b/drivers/staging/comedi/drivers/daqboard2000.c >> @@ -51,7 +51,7 @@ Configuration options: >> for the card, and here are the findings so far. >> >> 1. A good document that describes the PCI interface chip is found at: >> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf >> + http://www.plxtech.com/products/io/pci9080 > > > Again, googling "9080db-106.pdf" locates the pdf, but it isn't available > without registration using the link you provided. I suggest that you at > least keep the filename (see above). > >> >> 2. The initialization done so far is: >> a. program the FPGA (windows code sans a lot of error messages) >> diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c >> index bd16f91..a2691db 100644 >> --- a/drivers/staging/comedi/drivers/ni_mio_common.c >> +++ b/drivers/staging/comedi/drivers/ni_mio_common.c >> @@ -34,7 +34,7 @@ >> 340747b.pdf AT-MIO E series Register Level Programmer Manual >> 341079b.pdf PCI E Series RLPM >> 340934b.pdf DAQ-STC reference manual >> - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) >> + 67xx and 611x registers (from http://www.ni.com/pdf/manuals/340934b.pdf) >> release_ni611x.pdf >> release_ni67xx.pdf > > This is wrong. The URL you provided doesn't offer release_ni611x.pdf or > release_ni67xx.pdf. Those two documents are here: > ftp://ftp.ni.com/support/daq/mhddk/documentation/ > > >> Other possibly relevant info: >> diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h >> index 485d63f..6c14b6b 100644 >> --- a/drivers/staging/comedi/drivers/plx9080.h >> +++ b/drivers/staging/comedi/drivers/plx9080.h >> @@ -13,7 +13,7 @@ >> * >> ******************************************************************** >> * >> - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ >> + * Copyright (C) 1999 RG Studio s.c., > > > You could lose the trailing comma. > > >> * Written by Krzysztof Halasa<khc(a)rgstudio.com.pl> >> * >> * Portions (C) SBE Inc., used by permission. > >> diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c >> index 6612247..31b0a13 100644 >> --- a/drivers/staging/quickstart/quickstart.c >> +++ b/drivers/staging/quickstart/quickstart.c >> @@ -5,8 +5,7 @@ >> * Copyright (C) 2007-2010 Angelo Arrifano<miknix(a)gmail.com> >> * >> * Information gathered from disassebled dsdt and from here: >> - * "http://download.microsoft.com/download/9/c/5/ >> - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" >> + * "http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx" > > > Angle brackets would be better than quote marks. > > >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by >> diff --git a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig >> index b5f78b6..fda68f7 100644 >> --- a/drivers/telephony/Kconfig >> +++ b/drivers/telephony/Kconfig >> @@ -31,7 +31,7 @@ config PHONE_IXJ >> isapnp support. Please read<file:Documentation/telephony/ixj.txt>. >> >> For more information on these cards, see Quicknet's web site at: >> - <http://www.quicknet.net/>. >> + <http://www.qn.net/>. > > > No, Quicknet Technologies (www.quicknet.net in the web archive) is not the > same as Quicknet, Inc. The URL is in the web archive. > > >> >> If you do not have any Quicknet telephony cards, you can safely >> say N here. >> diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c >> index b53deee..872ee40 100644 >> --- a/drivers/telephony/ixj.c >> +++ b/drivers/telephony/ixj.c >> @@ -26,7 +26,7 @@ >> * Daniele Bellucci,<bellucda(a)tiscali.it> >> * >> * More information about the hardware related to this driver can be found >> - * at our website: http://www.quicknet.net >> + * at our website: http://www.qn.net/ > > > Same. > > >> * >> * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR >> * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT >> diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h >> index 4c32a43..c012193 100644 >> --- a/drivers/telephony/ixj.h >> +++ b/drivers/telephony/ixj.h >> @@ -22,7 +22,7 @@ >> * Mike Preston,<mpreston(a)quicknet.net> >> * >> * More information about the hardware related to this driver can be found >> - * at our website: http://www.quicknet.net >> + * at our website: http://www.qn.net/ > > > Same. > > >> * >> * Fixes: >> * >> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig >> index 1da73ec..8d3ba1d 100644 >> --- a/drivers/uio/Kconfig >> +++ b/drivers/uio/Kconfig >> @@ -19,7 +19,7 @@ config UIO_CIF >> Driver for Hilscher CIF DeviceNet and Profibus cards. This >> driver requires a userspace component that handles all of the >> heavy lifting and can be found at: >> - http://www.osadl.org/projects/downloads/UIO/user/cif-* >> + http://www.osadl.org/projects/downloads/UIO/user/ > > > The old link is correct. But it can be improved. For example -- > > - driver requires a userspace component that handles all of the > - heavy lifting and can be found at: > - http://www.osadl.org/projects/downloads/UIO/user/cif-* > + driver requires a userspace component called cif that handles > + all of the heavy lifting and can be found at: > + http://www.osadl.org/projects/downloads/UIO/user/ > > > >> >> To compile this driver as a module, choose M here: the module >> will be called uio_cif. >> diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig >> index 916b2b6..fc20f80 100644 >> --- a/drivers/usb/serial/Kconfig >> +++ b/drivers/usb/serial/Kconfig >> @@ -264,7 +264,7 @@ config USB_SERIAL_IUU >> help >> Say Y here if you want to use a IUU in phoenix mode and get >> an extra ttyUSBx device. More information available on >> - http://eczema.ecze.com/iuu_phoenix.html >> + http://www.opensc-project.org/openct/wiki/wbeiuu > > > The old URL is in the web archive. You don't have to use this IUU driver > with OpenSC... > > >> >> To compile this driver as a module, choose M here: the >> module will be called iuu_phoenix.o >> @@ -289,7 +289,8 @@ config USB_SERIAL_KEYSPAN >> and was developed with their support. You must also include >> firmware to support your particular device(s). >> >> - See<http://misc.nu/hugh/keyspan.html> for more information. >> + See<http://www.carnationsoftware.com/carnation/Keyspan.html> > > > I dunno what Carnation Software has to do with it. Hugh's page moved > here: > > http://blemings.org/hugh/keyspan.html > > > >> + for more information. >> >> To compile this driver as a module, choose M here: the >> module will be called keyspan. >> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h >> index 15a4583..2438ae0 100644 >> --- a/drivers/usb/serial/ftdi_sio_ids.h >> +++ b/drivers/usb/serial/ftdi_sio_ids.h >> @@ -335,7 +335,7 @@ >> #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ >> >> /* ACT Solutions HomePro ZWave interface >> - (http://www.act-solutions.com/HomePro.htm) */ >> + (http://www.act-solutions.com/index.php) */ > > > A better link is, > http://www.act-solutions.com/HomePro-Product-Matrix.html > > >> #define FTDI_ACTZWAVE_PID 0xF2D0 >> >> /* >> @@ -434,7 +434,7 @@ >> >> /* >> * PCDJ use ftdi based dj-controllers. The following PID is >> - * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp >> + * for their DAC-2 device http://pcdj.com/index.php/support/dex_dac_2/ > > > That's not the same page. The old one is in the web archive, so no patch > needed. > > >> * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen) >> */ >> #define FTDI_PCDJ_DAC2_PID 0xFA88 > >> @@ -723,7 +723,7 @@ >> >> /* >> * Bayer Ascensia Contour blood glucose meter USB-converter cable. >> - * http://winglucofacts.com/cables/ >> + * http://www.simplewins.com/Default.aspx > > > > The old link is valid. Your URL has this: > http://www.simplewins.com/site/Adults/Monitor/Pages/Bayer-Products/Contour-… > but who's to say whether it has the same PID/VID? I don't know... > >> */ >> #define BAYER_VID 0x1A79 >> #define BAYER_CONTOUR_CABLE_PID 0x6001 > > >> diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c >> index 297163c..9240914 100644 >> --- a/drivers/usb/serial/keyspan.c >> +++ b/drivers/usb/serial/keyspan.c >> @@ -9,7 +9,7 @@ >> the Free Software Foundation; either version 2 of the License, or >> (at your option) any later version. >> >> - See http://misc.nu/hugh/keyspan.html for more information. >> + See http://www.carnationsoftware.com/carnation/Keyspan.html for more information. > > > As above, > http://blemings.org/hugh/keyspan.html > > >> >> Code in this driver inspired by and in a number of places taken >> from Brian Warner's original Keyspan-PDA driver. >> diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h >> index bf3297d..f8b6a41 100644 >> --- a/drivers/usb/serial/keyspan.h >> +++ b/drivers/usb/serial/keyspan.h >> @@ -9,7 +9,7 @@ >> the Free Software Foundation; either version 2 of the License, or >> (at your option) any later version. >> >> - See http://misc.nu/hugh/keyspan.html for more information. >> + See http://www.carnationsoftware.com/carnation/Keyspan.html for more information. > > > http://blemings.org/hugh/keyspan.html > > >> >> Code in this driver inspired by and in a number of places taken >> from Brian Warner's original Keyspan-PDA driver. >> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h >> index 3a3f5e6..6f773c4 100644 >> --- a/drivers/usb/serial/mct_u232.h >> +++ b/drivers/usb/serial/mct_u232.h >> @@ -10,10 +10,10 @@ >> * >> * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No. >> * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin >> - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further >> - * information. The properties of this device are listed at the end of this >> - * file. This device is available from various distributors. I know Hana, >> - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25. >> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html >> + * for further information. The properties of this device are listed at the end >> + * of this file. This device is available from various distributors. >> + * D-Link, http://www.dlink.com/products/usb/dsbs25. > > > The trailing "." should go. How about this -- > > + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html > + * for further information. The properties of this device are listed at the end > + * of this file. This device was used in the Dlink DSB-S25. > > >> * >> * All of the information about the device was acquired by using SniffUSB >> * on Windows98. The technical details of the reverse engineering are > >> diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig >> index 8a372ba..b356e15 100644 >> --- a/drivers/usb/storage/Kconfig >> +++ b/drivers/usb/storage/Kconfig >> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig >> index 8b31fdf..a07fc57 100644 >> --- a/drivers/video/Kconfig >> +++ b/drivers/video/Kconfig >> @@ -1323,7 +1323,7 @@ config FB_RADEON >> don't need to choose this to run the Radeon in plain VGA mode. >> >> There is a product page at >> - http://apps.ati.com/ATIcompare/ >> + http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx > > > There's no hardware product information at the URL you gave. It is a > brouchure for AMD's Catalyst software. Here is the URL for the product > specs: > > http://products.amd.com/en-us/GraphicCardResult.aspx > > > >> >> config FB_RADEON_I2C >> bool "DDC/I2C for ATI Radeon support" >> @@ -1395,7 +1395,7 @@ config FB_ATY_CT >> Say Y here to support use of ATI's 64-bit Rage boards (or other >> boards based on the Mach64 CT, VT, GT, and LT chipsets) as a >> framebuffer device. The ATI product support page for these boards >> - is at<http://support.ati.com/products/pc/mach64/>. >> + is at<http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx>. > > Why? Catalyst is not related to Mach64. Here's the URL you want: > > http://support.ati.com/products/pc/mach64/mach64.html > > You won't find any info at amd.com but at least it works in the web > archive, which is a huge improvement. > > > >> >> config FB_ATY_GENERIC_LCD >> bool "Mach64 generic LCD support (EXPERIMENTAL)" > >> diff --git a/fs/nls/nls_euc-jp.c b/fs/nls/nls_euc-jp.c >> index 7424929..d7d5526 100644 >> --- a/fs/nls/nls_euc-jp.c >> +++ b/fs/nls/nls_euc-jp.c >> @@ -3,7 +3,7 @@ >> * >> * Added `OSF/JVC Recommended Code Set Conversion Specification >> * between Japanese EUC and Shift-JIS' support:<hirofumi(a)mail.parknet.co.jp> >> - * (http://www.opengroup.or.jp/jvc/cde/sjis-euc-e.html) >> + * (http://www.opengroup.or.jp/) > > > The document is in the web archive, and not at your URL, so this is > damage. > > >> */ >> >> #include<linux/module.h> > >> diff --git a/include/crypto/b128ops.h b/include/crypto/b128ops.h >> index 0b8e6bc..499741c 100644 >> --- a/include/crypto/b128ops.h >> +++ b/include/crypto/b128ops.h >> @@ -4,7 +4,7 @@ >> * Copyright (c) 2006, Rik Snel<rsnel(a)cube.dyndns.org> >> * >> * Based on Dr Brian Gladman's (GPL'd) work published at >> - * http://fp.gladman.plus.com/cryptography_technology/index.htm >> + * http://www.gladman.me.uk/ > > > Well, it doesn't say "Based on Dr Brian Gladman's latest work". The > original is in the web archive so no patch is needed I think... > > >> * See the original copyright notice below. >> * >> * This program is free software; you can redistribute it and/or modify it >> diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h >> index 4086b8e..7021c6c 100644 >> --- a/include/crypto/gf128mul.h >> +++ b/include/crypto/gf128mul.h >> @@ -4,7 +4,7 @@ >> * Copyright (c) 2006 Rik Snel<rsnel(a)cube.dyndns.org> >> * >> * Based on Dr Brian Gladman's (GPL'd) work published at >> - * http://fp.gladman.plus.com/cryptography_technology/index.htm >> + * http://www.gladman.me.uk/ > > Same here. > > >> * See the original copyright notice below. >> * >> * This program is free software; you can redistribute it and/or modify it >> @@ -54,8 +54,8 @@ >> >> /* Comment by Rik: >> * >> - * For some background on GF(2^128) see for example: http://- >> - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf >> + * For some background on GF(2^128) see for example: >> + * http://www.cryptobarn.com/papers/gcm-spec.pdf > > > This is the correct URL: > http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-… > > >> * >> * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can >> * be mapped to computer memory in a variety of ways. Let's examine > >> diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h >> index 88b4589..594d871 100644 >> --- a/include/linux/ixjuser.h >> +++ b/include/linux/ixjuser.h >> @@ -25,7 +25,7 @@ >> * Mike Preston,<mpreston(a)quicknet.net> >> * >> * More information about the hardware related to this driver can be found >> - * at our website: http://www.quicknet.net >> + * at our website: http://www.qn.net/ > > See above. > > >> * >> * Fixes: >> * >> diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h >> index de24af7..60d73a6 100644 >> --- a/include/linux/n_r3964.h >> +++ b/include/linux/n_r3964.h >> @@ -4,7 +4,7 @@ >> * Copyright by >> * Philips Automation Projects >> * Kassel (Germany) >> - * http://www.pap-philips.de >> + * http://www.pronto.philips.com/index.cfm?id=1292 > > > This URL you have provided is certainly pap but otherwise it doesn't > relate. The URL you removed looks like advertising for a division that > doesn't exist any longer, apparently spun off as KH-Automaton Projects > GmbH. I'd remove it too. > > >> * ----------------------------------------------------------- >> * This software may be used and distributed according to the terms of >> * the GNU General Public License, incorporated herein by reference. > >> diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig >> index 571f895..a90050d 100644 >> --- a/net/ipv4/Kconfig >> +++ b/net/ipv4/Kconfig >> @@ -84,7 +84,7 @@ config IP_FIB_TRIE >> >> An experimental study of compression methods for dynamic tries >> Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. >> - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ >> + http://www.csc.kth.se/~snilsson/software/dyntrie2/ >> >> endchoice >> >> @@ -555,7 +555,7 @@ config TCP_CONG_VENO >> distinguishing to circumvent the difficult judgment of the packet loss >> type. TCP Veno cuts down less congestion window in response to random >> loss packets. >> - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf >> + See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf > > You wouldn't guess from looking at either of these links, but the > citation is actually this paper: > > C.P. Fu and S.C. Liew. "TCP Veno: TCP Enhancement for Transmission > Over wireless Access Networks," IEEE Journal on Selected Areas in > Communication, February 2003. > > >> >> config TCP_CONG_YEAH >> tristate "YeAH TCP" > >> diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig >> index 1833bdb..d6a784c 100644 >> --- a/net/ipv4/netfilter/Kconfig >> +++ b/net/ipv4/netfilter/Kconfig >> @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG >> which can only be viewed through syslog. >> >> The appropriate userspace logging daemon (ulogd) may be obtained from >> - <http://www.gnumonks.org/projects/ulogd/> >> + <http://www.gnumonks.org/projects/> > > > Well I tried to obtain ulogd there but I couldn't find it. > It is available here though: > http://www.netfilter.org/projects/ulogd/index.html > > >> >> To compile it as a module, choose M here. If unsure, say N. >> > >> diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c >> index 20151d6..bbf0e99 100644 >> --- a/net/ipv4/tcp_westwood.c >> +++ b/net/ipv4/tcp_westwood.c >> @@ -3,7 +3,7 @@ >> * >> * Angelo Dell'Aera: author of the first version of TCP Westwood+ in Linux 2.4 >> * >> - * Support at http://c3lab.poliba.it/index.php/Westwood >> + * Support at http://www.cs.ucla.edu/NRL/hpi/tcpw/ > > I wouldn't think that you'd get support there. It claims to be the > homepage for a BSD based implementation of TCP Westwood. In anycase, > google cached the poliba.it link on 19 Sep 2010, so I don't think this > needs to be patched. Besides, it is also in the web archive. > > >> * Main references in literature: >> * >> * - Mascolo S, Casetti, M. Gerla et al. > >> >> The boundaries and the conditions are changed according to RFC793: >> the packet must intersect the window (i.e. segments may be >> diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c >> index 456a1b4..e2c5fe9 100644 >> --- a/sound/oss/ac97_codec.c >> +++ b/sound/oss/ac97_codec.c >> @@ -22,10 +22,7 @@ >> ************************************************************************** >> * >> * The Intel Audio Codec '97 specification is available at the Intel > > "is available at:" > > >> - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/ >> - * >> - * The specification itself is currently available at: >> - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf >> + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf >> * >> ************************************************************************** >> * >> diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c >> index c7fba53..deffcc8 100644 >> --- a/sound/pci/ens1370.c >> +++ b/sound/pci/ens1370.c >> @@ -22,7 +22,7 @@ >> /* Power-Management-Code ( CONFIG_PM ) >> * for ens1371 only ( FIXME ) >> * derived from cs4281.c, atiixp.c and via82xx.c >> - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm >> + * using http://www.kernel.org/pub/linux/kernel/people/tiwai/docs/writing-an-alsa-dr… > > > I think this is a better choice: > http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ > > >> * by Kurt J. Bosch >> */ >> > > Thanks. > > Finn >

1 0

[alsa-devel] Alsamixer-Qt4 0.4.0 released
by Sebastian H. 26 Sep '10

26 Sep '10

Hello everyone I've been working on Alsamixer-Qt4 lately and compiled the changes into a new release version 0.4.0. Most importantly the cards list can be refreshed now and the style got a little overhaul, too. A more detailed changelog can be found at the xwmw.org page. The new version 0.4.0 is available at the known places. http://xwmw.org/alsamixer-qt4/ http://sourceforge.net/projects/alsamixer-qt4/files/ Any comments are welcome. Cheers, Sebastian

5 18

Re: [alsa-devel] [RFC 2/3 v3]update web addresses in stagging
by Justin P. Mattock 26 Sep '10

26 Sep '10

On 09/25/2010 01:47 PM, Matthew Dharm wrote: > On Fri, Sep 24, 2010 at 05:51:56PM -0700, Justin P. Mattock wrote: >> On 09/24/2010 05:34 PM, Greg KH wrote: >>> On Fri, Sep 24, 2010 at 05:08:56PM -0700, Justin P. Mattock wrote: >>>> The below patch, is a simple fix to a broken web address not using a >>>> period in it's >>>> name. I'll leave this up to you guys if you want to use it... >>>> >>>> Signed-off-by: Justin P. Mattock<justinmattock(a)gmail.com> >>> >>> I'll queue it up, thanks. >>> >>> Oh, it's "staging", not "stagging" as you have up there in the Subject: >>> :) >>> >>> thanks, >>> >>> greg k-h >>> >> >> shoot... and I actually changed it from staging to stagging thinking >> that was correct..(duh).. >> >> Anyways alright.. I'll exclude this one if the other sets get finalized. > > One random suggestion: Perhaps you should include a date here? i.e. "URL > blah blah blah (as of Sept 2010)" > > That way, people have some idea how much they can trust that URL without > having to dig into the kernel history to see when it was last changed. > > Matt > well.. as it stand right now doing grep -Re "http" in all the directories(minus COPYING/MAINTAINERS) gave me a little over 2000 addresses to check(not so bad, only a few days worth of checking(finding the broken address is time consuming)).. so I could go back and do this for all of them except the webarchive addresses that are broken(maybe put a tag on them saying use_webarchive or something). then there is the question of how much more bloated will the kernel get with such a thing(I'm guessing not much, but then again you never know). Justin P. Mattock

1 0

Re: [alsa-devel] [PATCH] sound/pci/rme9652: prevent reading uninitialized stack memory
by Takashi Iwai 25 Sep '10

25 Sep '10

At Sat, 25 Sep 2010 11:07:27 -0400, Dan Rosenberg wrote: > > The SNDRV_HDSP_IOCTL_GET_CONFIG_INFO and > SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctls in hdspm.c and hdsp.c allow > unprivileged users to read uninitialized kernel stack memory, because > several fields of the hdsp{m}_config_info structs declared on the stack > are not altered or zeroed before being copied back to the user. This > patch takes care of it. > > Signed-off-by: Dan Rosenberg <dan.j.rosenberg(a)gmail.com> Thanks, applied now with minor optimization (memset outside spinlock). Takashi > diff -urp linux-2.6.35.5.orig/sound/pci/rme9652/hdsp.c linux-2.6.35.5/sound/pci/rme9652/hdsp.c > --- linux-2.6.35.5.orig/sound/pci/rme9652/hdsp.c 2010-09-20 16:59:09.000000000 -0400 > +++ linux-2.6.35.5/sound/pci/rme9652/hdsp.c 2010-09-25 10:59:42.000000000 -0400 > @@ -4601,6 +4601,8 @@ static int snd_hdsp_hwdep_ioctl(struct s > unsigned long flags; > int i; > > + memset(&info, 0, sizeof(info)); > + > err = hdsp_check_for_iobox(hdsp); > if (err < 0) > return err; > diff -urp linux-2.6.35.5.orig/sound/pci/rme9652/hdspm.c linux-2.6.35.5/sound/pci/rme9652/hdspm.c > --- linux-2.6.35.5.orig/sound/pci/rme9652/hdspm.c 2010-09-20 16:59:09.000000000 -0400 > +++ linux-2.6.35.5/sound/pci/rme9652/hdspm.c 2010-09-25 10:58:44.000000000 -0400 > @@ -4128,6 +4128,9 @@ static int snd_hdspm_hwdep_ioctl(struct > case SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO: > > spin_lock_irq(&hdspm->lock); > + > + memset(&info, 0, sizeof(info)); > + > info.pref_sync_ref = hdspm_pref_sync_ref(hdspm); > info.wordclock_sync_check = hdspm_wc_sync_check(hdspm); > > >

1 0

Re: [alsa-devel] [PATCH 0/3] alsa-lib: UCM - Use Case Manager
by Jaroslav Kysela 25 Sep '10

25 Sep '10

On Tue, 7 Sep 2010, Liam Girdwood wrote: > Hi Jaroslav, > > Any update on this ? I have someone scheduled to write new use case > files and someone else ready to add PA support. Hi, I'm working on this. Unfortunately, I have other things which interrupts this work. The actual code is at: http://git.alsa-project.org/?p=alsa-lib.git;a=shortlog;h=ucm During coding, it appears that even the handling of controls might be changed. Your code has everything build-in. I'm not sure why to restrict the card/verb/modifier/transition definitions only for the universal control API. I think that it might be more "easy to understand" and universal to define just sequence of commands like: SectionDefaults [ exec "amixer cset name='Master Playback Switch',index=2 1,1" exec "amixer cset name='Master Playback Volume',index=2 25,25" exec "amixer cset name='Master Mono Playback',index=1 0" exec "amixer cset name='Master Mono Playback Volume',index=1 0" msleep 50 # or: exec "usleep 50000" exec "amixer cset name='PCM Switch',index=2 1,1" ........ ] Because "amixer cset" command will be probably most used command, we can eventually move the amixer code to alsa-lib to not create so much processes and speed-up things. It means that the ucm should not track card controls, but commands for transitions. The only thing which might "broke" things is calling fork from a pthread: http://unix.derkeiler.com/Newsgroups/comp.unix.programmer/2003-09/0672.html But it seems that fork/immediate-exec is an acceptable way. Comments? Jaroslav ----- Jaroslav Kysela <perex(a)perex.cz> Linux Kernel Sound Maintainer ALSA Project, Red Hat, Inc.

6 23

[alsa-devel] [PATCH - Add mixer support for M-Audio FTU series 1/1]Add basic mixer support for M-Audio FTU (8R)
by linuxaudio＠showlabor.de 25 Sep '10

25 Sep '10

And again, next try (somehow my mail address has not been accepted despite registration) This patch (against alsa-kmirror) adds mixer support for M-Audio Fast Track Ultra (8R) devices. It should be suitable as a blueprint for adding mixer support to other devices with missing/wrong descriptors. I needed to move some enums to header files, raise MAX_CHANNELS, and slightly modify snd_usb_audio_probe(). If this get accepted I will work on the effects unit in the FTU devices. It's straight forward work based on this. Kind regards, Felix

1 1

[alsa-devel] [RFC 2/3 v3]update web addresses in stagging
by Justin P. Mattock 25 Sep '10

25 Sep '10

The below patch, is a simple fix to a broken web address not using a period in it's name. I'll leave this up to you guys if you want to use it... Signed-off-by: Justin P. Mattock <justinmattock(a)gmail.com> --- .../comedi/drivers/addi-data/APCI1710_82x54.c | 2 +- .../comedi/drivers/addi-data/APCI1710_82x54.h | 2 +- .../comedi/drivers/addi-data/APCI1710_Chrono.c | 2 +- .../comedi/drivers/addi-data/APCI1710_Dig_io.c | 2 +- .../comedi/drivers/addi-data/APCI1710_Dig_io.h | 2 +- .../comedi/drivers/addi-data/APCI1710_INCCPT.c | 2 +- .../comedi/drivers/addi-data/APCI1710_INCCPT.h | 2 +- .../comedi/drivers/addi-data/APCI1710_Inp_cpt.c | 2 +- .../comedi/drivers/addi-data/APCI1710_Inp_cpt.h | 2 +- .../comedi/drivers/addi-data/APCI1710_Pwm.c | 2 +- .../comedi/drivers/addi-data/APCI1710_Pwm.h | 2 +- .../comedi/drivers/addi-data/APCI1710_Ssi.c | 2 +- .../comedi/drivers/addi-data/APCI1710_Ssi.h | 2 +- .../comedi/drivers/addi-data/APCI1710_Tor.c | 2 +- .../comedi/drivers/addi-data/APCI1710_Tor.h | 2 +- .../comedi/drivers/addi-data/APCI1710_Ttl.c | 2 +- .../comedi/drivers/addi-data/APCI1710_Ttl.h | 2 +- .../comedi/drivers/addi-data/addi_amcc_S5920.c | 2 +- .../comedi/drivers/addi-data/addi_amcc_S5920.h | 2 +- .../comedi/drivers/addi-data/addi_amcc_s5933.h | 2 +- .../staging/comedi/drivers/addi-data/addi_common.c | 2 +- .../staging/comedi/drivers/addi-data/addi_common.h | 2 +- .../staging/comedi/drivers/addi-data/addi_eeprom.c | 2 +- .../comedi/drivers/addi-data/hwdrv_APCI1710.c | 2 +- .../comedi/drivers/addi-data/hwdrv_APCI1710.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci035.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci035.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1032.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1032.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1500.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1500.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1516.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1516.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1564.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci1564.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci16xx.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci2016.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci2016.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci2032.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci2032.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci2200.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci2200.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3120.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3120.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3200.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3200.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3501.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3501.h | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3xxx.c | 2 +- .../comedi/drivers/addi-data/hwdrv_apci3xxx.h | 2 +- 50 files changed, 50 insertions(+), 50 deletions(-) diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c index 60213d2..b59f2d4 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h index 9698ae1..81346db 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c index fbc26a0..644bda4 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c index a6898e4..07108f9 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h index af1b9cd..cc3973d 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c index 0e498e9..14b13ea 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h index 7b48110..358298b 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c index 204d798..3f9cfa2 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h index 61a21cc..31fbb0b 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c index 148ce6f..8883e66 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h index bf1b4c3..d8ad0b9 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c index 6360de5..0c890a9 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h index eb7f101..ef4d887 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c index 344df94..7361d50 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h index 03a93cb..537d475 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c index de6f772..9e177f4 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h index c4f1134..adcab82 100644 --- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c index 97c10aa..90e71e1 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c +++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h index 622a4ac..9afdb13 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h +++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h index 8ed19bc..35a3ea1 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h +++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c index 5ed4b94..93d7c05 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_common.c +++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.h b/drivers/staging/comedi/drivers/addi-data/addi_common.h index 1a28169..13621d4 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_common.h +++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c index e0213a9..0aa11a0 100644 --- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c +++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c index d7d768e..b748efc 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h index 22b3e56..89c99eb 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c index 1369e22..74012e0 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h index 68db9c1..3c700c7 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c index faea003..6e06d9d 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h index e29a72a..7114acb 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c index b3b9218..b5d7d98 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h index 0579033..647f9eb 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c index 7948c41..70edc38 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h index 21c09ed..4472829 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c index 4299ff5..806f76d 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h index 0780c44..c91594d 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c index 8bc88ad..8ebb254 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c index 89783b1eb..7090c24 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h index 639944c..c42612a 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c index d7d2223..73802ab 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h index c971d14..ab145e7 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c index e01889c..ced101f 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h index 63e5f1f..83f42af 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c index 851f71b..a813fdb 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h index fedfc9c..b3c8197 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h @@ -9,7 +9,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c index 560c848..5fd0303 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h index f3e7ebf..812a9c4 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c index 4ed441a..517e9ab 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h index 743523e..63df635 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c index 2e20bc7..d3c5963 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c @@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. D-77833 Ottersweier Tel: +19(0)7223/9493-0 Fax: +49(0)7223/9493-92 - http://www.addi-data-com + http://www.addi-data.com info(a)addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h index 788d7c1..cce9e12 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h @@ -6,7 +6,7 @@ * D-77833 Ottersweier * Tel: +19(0)7223/9493-0 * Fax: +49(0)7223/9493-92 - * http://www.addi-data-com + * http://www.addi-data.com * info(a)addi-data.com * * This program is free software; you can redistribute it and/or modify it -- 1.7.2.1

2 2

[alsa-devel] [RFC 3/3 v3]update broken web addresses archive dot org
by Justin P. Mattock 25 Sep '10

25 Sep '10

Below is just a patch showing all the archive.org in the kernel so far. up to you if you guys want to use this.. Signed-off-by: Justin P. Mattock <justinmattock(a)gmail.com> --- drivers/block/Kconfig | 2 +- drivers/edac/i82975x_edac.c | 2 +- drivers/hwmon/hwmon-vid.c | 6 +++--- drivers/input/misc/cm109.c | 4 ++-- drivers/media/IR/keymaps/rc-rc5-tv.c | 2 +- drivers/media/dvb/pluto2/pluto2.c | 2 +- drivers/media/radio/Kconfig | 4 ++-- drivers/media/radio/radio-aztech.c | 2 +- drivers/media/video/bt8xx/bttv-cards.c | 2 +- drivers/media/video/pwc/philips.txt | 2 +- drivers/mtd/maps/Kconfig | 6 +++--- drivers/mtd/maps/pismo.c | 2 +- drivers/mtd/maps/sc520cdp.c | 2 +- drivers/net/8139too.c | 2 +- drivers/net/Kconfig | 18 +++++++++--------- drivers/net/acenic.c | 2 +- drivers/net/fealnx.c | 2 +- drivers/net/hamachi.c | 4 +++- drivers/net/lne390.c | 4 ++-- drivers/net/natsemi.c | 9 ++++----- drivers/net/pci-skeleton.c | 4 ++-- drivers/net/starfire.c | 7 +++---- drivers/net/sundance.c | 6 +++--- drivers/net/tokenring/Kconfig | 2 +- drivers/net/wan/Kconfig | 12 ++++++------ drivers/net/wan/cosa.c | 3 ++- drivers/net/wan/farsync.c | 4 ++-- drivers/net/wan/sbni.c | 2 +- drivers/net/wireless/ath/ath5k/reg.h | 2 +- drivers/net/wireless/hostap/hostap_cs.c | 2 +- drivers/parport/Kconfig | 4 ++-- drivers/scsi/arm/Kconfig | 2 +- drivers/scsi/ibmmca.c | 4 ++-- drivers/serial/altera_uart.c | 2 +- drivers/serial/sn_console.c | 2 +- drivers/staging/comedi/drivers/c6xdigio.c | 4 ++-- drivers/staging/comedi/drivers/pcl711.c | 2 +- drivers/staging/go7007/go7007.txt | 8 ++++---- drivers/usb/serial/cypress_m8.c | 2 +- drivers/usb/storage/unusual_devs.h | 2 +- drivers/video/macfb.c | 2 +- drivers/video/s3fb.c | 2 +- drivers/video/svgalib.c | 2 +- drivers/video/vt8623fb.c | 2 +- drivers/watchdog/pcwd.c | 2 +- fs/ncpfs/Kconfig | 3 ++- fs/nls/Kconfig | 2 +- fs/nls/nls_base.c | 2 +- fs/reiserfs/procfs.c | 4 ++-- include/linux/edd.h | 5 +++-- include/linux/mtd/pismo.h | 2 +- include/scsi/sg.h | 10 +++++----- net/ipv4/Kconfig | 4 ++-- net/ipv4/tcp_illinois.c | 2 +- net/ipv4/tcp_lp.c | 2 +- sound/isa/Kconfig | 2 +- sound/isa/cmi8330.c | 2 +- sound/oss/Kconfig | 4 ++-- sound/pci/ac97/ac97_patch.c | 2 +- sound/pci/nm256/nm256.c | 2 +- 60 files changed, 108 insertions(+), 105 deletions(-) diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index de27768..645a3f8 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -169,7 +169,7 @@ config BLK_DEV_UMEM ---help--- Saying Y here will include support for the MM5415 family of battery backed (Non-volatile) RAM cards. - <http://www.umem.com/> + <http://web.archive.org/web/%2A/http://www.umem.com/> The cards appear as block devices that can be partitioned into as many as 15 partitions. diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c index 3218819..b2e6c21 100644 --- a/drivers/edac/i82975x_edac.c +++ b/drivers/edac/i82975x_edac.c @@ -1,6 +1,6 @@ /* * Intel 82975X Memory Controller kernel module - * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com) + * (C) 2007 aCarLab (India) Pvt. Ltd. (http://web.archive.org/web/%2A/http://acarlab.com) * (C) 2007 jetzbroadband (http://jetzbroadband.com) * This file may be distributed under the terms of the * GNU General Public License. diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 897702d..a26fa3f 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -43,15 +43,15 @@ * This corresponds to an arbitrary VRM code of 24 in the functions below. * These CPU models (K8 revision <= E) have 5 VID pins. See also: * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759, - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/257… + * http://web.archive.org/web/%2A/http://www.amd.com/us-en/assets/content_type… * * AMD NPT Family 0Fh Processors, AMD Publication 32559, - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/325… + * http://web.archive.org/web/%2A/http://www.amd.com/us-en/assets/content_type… * Table 71. VID Code Voltages * This corresponds to an arbitrary VRM code of 25 in the functions below. * These CPU models (K8 revision >= F) have 6 VID pins. See also: * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610, - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/336… + * http://web.archive.org/web/%2A/http://www.amd.com/us-en/assets/content_type… * * The 17 specification is in fact Intel Mobile Voltage Positioning - * (IMVP-II). You can find more information in the datasheet of Max1718 diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index b09c7d1..9007600 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -230,7 +230,7 @@ static unsigned short keymap_gtalk(int scancode) /* * Keymap for Allied-Telesis Corega USBPH01 - * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html + * http://web.archive.org/web/%2A/http://www.alliedtelesis-corega.com/2/1344/1… * * Contributed by july(a)nat.bg */ @@ -260,7 +260,7 @@ static unsigned short keymap_usbph01(int scancode) /* * Keymap for ATCom AU-100 * http://www.atcom.cn/products.html - * http://www.packetizer.com/products/au100/ + * http://web.archive.org/web/%2A/http://www.packetizer.com/products/au100/ * http://www.voip-info.org/wiki/view/AU-100 * * Contributed by daniel(a)gimpelevich.san-francisco.ca.us diff --git a/drivers/media/IR/keymaps/rc-rc5-tv.c b/drivers/media/IR/keymaps/rc-rc5-tv.c index 73cce2f..61be0bd 100644 --- a/drivers/media/IR/keymaps/rc-rc5-tv.c +++ b/drivers/media/IR/keymaps/rc-rc5-tv.c @@ -13,7 +13,7 @@ #include <media/rc-map.h> /* generic RC5 keytable */ -/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */ +/* see http://web.archive.org/web/%2A/http://users.pandora.be/nenya/electronics/rc… */ /* used by old (black) Hauppauge remotes */ static struct ir_scancode rc5_tv[] = { diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c index 1c79821..c709289 100644 --- a/drivers/media/dvb/pluto2/pluto2.c +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -3,7 +3,7 @@ * * Copyright (C) 2005 Andreas Oberritter <obi(a)linuxtv.org> * - * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ + * based on pluto2.c 1.10 - http://web.archive.org/web/%2A/http://instinct-wp8.no-ip.org/pluto/ * by Dany Salman <salmandany(a)yahoo.fr> * Copyright (c) 2004 TDF * diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 83567b8..c199ed9 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -24,7 +24,7 @@ config RADIO_CADET <file:Documentation/video4linux/API.html>. Further documentation on this driver can be found on the WWW at - <http://linux.blackhawke.net/cadet/>. + <http://web.archive.org/web/%2A/http://linux.blackhawke.net/cadet/>. To compile this driver as a module, choose M here: the module will be called radio-cadet. @@ -237,7 +237,7 @@ config RADIO_SF16FMR2 In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found on the WWW at - <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. + <http://web.archive.org/web/%2A/http://roadrunner.swansea.uk.linux.org/v4l.s…>. To compile this driver as a module, choose M here: the module will be called radio-sf16fmr2. diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index c223113..24926026 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -10,7 +10,7 @@ * Scott McGrath (smcgrath(a)twilight.vtc.vsc.edu) * William McGrath (wmcgrath(a)twilight.vtc.vsc.edu) * - * The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/ + * The basis for this code may be found at http://web.archive.org/web/%2A/http://bigbang.vtc.vsc.edu/fmradio/ * along with more information on the card itself. * * History: diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 7af56cd..0c2f677 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -2290,7 +2290,7 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, }, [BTTV_BOARD_SPIRIT_TV] = { - /* Spirit TV Tuner from http://spiritmodems.com.au */ + /* Spirit TV Tuner from http://web.archive.org/web/%2A/http://spiritmodems.com.au */ /* Stafford Goodsell <surge(a)goliath.homeunix.org> */ .name = "Spirit TV Tuner", .video_inputs = 3, diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt index d38dd79..751f114 100644 --- a/drivers/media/video/pwc/philips.txt +++ b/drivers/media/video/pwc/philips.txt @@ -1,6 +1,6 @@ This file contains some additional information for the Philips and OEM webcams. E-mail: webcam(a)smcc.demon.nl Last updated: 2004-01-19 -Site: http://www.smcc.demon.nl/webcam/ +Site: http://web.archive.org/web/*/http://www.smcc.demon.nl/webcam/ As of this moment, the following cameras are supported: * Philips PCA645 diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 142efd2..1c3f0ca 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -531,9 +531,9 @@ config MTD_PISMO depends on ARCH_VERSATILE help This driver allows for discovery of PISMO modules - see - <http://www.pismoworld.org/>. These are small modules containing - up to five memory devices (eg, SRAM, flash, DOC) described by an - I2C EEPROM. + <http://web.archive.org/web/%2A/http://www.pismoworld.org/>. + These are small modules containing up to five memory devices + (eg, SRAM, flash, DOC) described by an I2C EEPROM. This driver does not create any MTD maps itself; instead it creates MTD physmap and MTD SRAM platform devices. If you diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c index f4ce273..b42eecb 100644 --- a/drivers/mtd/maps/pismo.c +++ b/drivers/mtd/maps/pismo.c @@ -1,5 +1,5 @@ /* - * PISMO memory driver - http://www.pismoworld.org/ + * PISMO memory driver - http://web.archive.org/web/%2A/http://www.pismoworld.org/ * * For ARM Realview and Versatile platforms * diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 85c1e56..c3eb3c0 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -20,7 +20,7 @@ * The SC520CDP is an evaluation board for the Elan SC520 processor available * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size, * and up to 512 KiB of 8-bit DIL Flash ROM. - * For details see http://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_br… + * For details see http://web.archive.org/web/%2A/http://www.amd.com/products/epd/desiging/eva… */ #include <linux/module.h> diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index f5166dc..721363d 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -28,7 +28,7 @@ MD 21403 Support and updates available at - http://www.scyld.com/network/rtl8139.html + http://web.archive.org/web/%2A/http://www.scyld.com/network/rtl8139.html Twister-tuning table provided by Kinston <shangh(a)realtek.com.tw>. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 99fb1f6..c287c76 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -169,9 +169,9 @@ config NET_SB1000 a connection. Further documentation and the necessary scripts can be found at: - <http://www.jacksonville.net/~fventuri/> - <http://home.adelphia.net/~siglercm/sb1000.html> - <http://linuxpower.cx/~cable/> + <http://web.archive.org/web/%2A/http://www.jacksonville.net/~fventuri/> + <http://web.archive.org/web/%2A/http://home.adelphia.net/~siglercm/sb1000.ht…> + <http://web.archive.org/web/%2A/http://linuxpower.cx/~cable/> If you don't have this card, of course say N. @@ -1552,7 +1552,7 @@ config NATSEMI which is used in cards from PureData, NetGear, Linksys and others, including the 83815 chip. More specific information and updates are available from - <http://www.scyld.com/network/natsemi.html>. + <http://web.archive.org/web/%2A/http://www.scyld.com/network/natsemi.html>. config NE2K_PCI tristate "PCI NE2000 and clones support (see help)" @@ -1703,7 +1703,7 @@ config EPIC100 This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, which is based on the SMC83c17x (EPIC/100). More specific information and updates are available from - <http://www.scyld.com/network/epic100.html>. + <http://web.archive.org/web/%2A/http://www.scyld.com/network/epic100.html>. config SMSC9420 tristate "SMSC LAN9420 PCI ethernet adapter support" @@ -1729,7 +1729,7 @@ config SUNDANCE help This driver is for the Sundance "Alta" chip. More specific information and updates are available from - <http://www.scyld.com/network/sundance.html>. + <http://web.archive.org/web/%2A/http://www.scyld.com/network/sundance.html>. config SUNDANCE_MMIO bool "Use MMIO instead of PIO" @@ -2201,8 +2201,8 @@ config YELLOWFIN Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is used by the Beowulf Linux cluster project. See - <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more - information about this driver in particular and Beowulf in general. + <http://web.archive.org/web/%2A/http://cesdis.gsfc.nasa.gov/linux/drivers/ye…> + for more information about this driver in particular and Beowulf in general. To compile this driver as a module, choose M here: the module will be called yellowfin. This is recommended. @@ -3048,7 +3048,7 @@ config PLIP <file:Documentation/networking/PLIP.txt>. The cables can be up to 15m long. Mode 0 works also if one of the machines runs DOS/Windows and has some PLIP software installed, e.g. the Crynwr PLIP packet - driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>) + driver (<http://web.archive.org/web/%2A/http://oak.oakland.edu/simtel.net/msdos/pktd…>) and winsock or NCSA's telnet. If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index b9a5916..ecfa01a 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -440,7 +440,7 @@ MODULE_PARM_DESC(tx_ratio, "AceNIC/3C985/GA620 ratio of NIC memory used for TX/R static const char version[] __devinitconst = "acenic.c: v0.92 08/05/2002 Jes Sorensen, linux-acenic(a)SunSITE.dk\n" - " http://home.cern.ch/~jes/gige/acenic.html\n"; + " http://web.archive.org/web/20071219235833/jes.web.cern.ch/jes/gige/acenic.h…"; static int ace_get_settings(struct net_device *, struct ethtool_cmd *); static int ace_set_settings(struct net_device *, struct ethtool_cmd *); diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index d7e8f6b..6d389c1 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -14,7 +14,7 @@ Annapolis MD 21403 Support information and updates available at - http://www.scyld.com/network/pci-skeleton.html + http://web.archive.org/web/%2A/http://www.scyld.com/network/pci-skeleton.ht… Linux kernel updates: diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index f4523cd..8883d39 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -19,7 +19,9 @@ adapter. Support and updates available at - http://www.scyld.com/network/hamachi.html + http://web.archive.org/web/%2A/http://www.scyld.com/network/hamachi.html + or + http://web.archive.org/web/%2A/http://www.parl.clemson.edu/~keithu/hamachi.… */ diff --git a/drivers/net/lne390.c b/drivers/net/lne390.c index 8a1097c..a154ca4 100644 --- a/drivers/net/lne390.c +++ b/drivers/net/lne390.c @@ -23,8 +23,8 @@ The shared memory address selection is also slightly different. Note that shared memory address > 1MB are supported with this driver. - You can try <http://www.mylex.com> if you want more info, as I've - never even seen one of these cards. :) + You can try <http://web.archive.org/web/%2A/http://www.mylex.com> + if you want more info, as I've never even seen one of these cards. :) Arnaldo Carvalho de Melo <acme(a)conectiva.com.br> - 2000/09/01 - get rid of check_region diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index a6033d4..cad37c6 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -19,8 +19,7 @@ Annapolis MD 21403 Support information and updates available at - http://www.scyld.com/network/netsemi.html - [link no longer provides useful info -jgarzik] + http://web.archive.org/web/%2A/http://www.scyld.com/network/netsemi.html TODO: @@ -208,8 +207,8 @@ hardware descriptor ownership, disabling interrupts and NAPI poll scheduling. IVb. References -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html +http://web.archive.org/web/%2A/http://www.scyld.com/expert/100mbps.html +http://web.archive.org/web/%2A/http://www.scyld.com/expert/NWay.html Datasheet is available from: http://www.national.com/pf/DP/DP83815.html @@ -223,7 +222,7 @@ None characterised. /* * Support for fibre connections on Am79C874: * This phy needs a special setup when connected to a fibre cable. - * http://www.amd.com/files/connectivitysolutions/networking/archivednetworkin… + * http://web.archive.org/web/%2A/http://www.amd.com/files/connectivitysolutio… */ #define PHYID_AM79C874 0x0022561b diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 627b619..b5819b7 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -28,7 +28,7 @@ MD 21403 Support and updates available at - http://www.scyld.com/network/rtl8139.html + http://web.archive.org/web/%2A/http://www.scyld.com/network/rtl8139.html Twister-tuning table provided by Kinston <shangh(a)realtek.com.tw>. @@ -79,7 +79,7 @@ that almost all frames will need to be copied to an alignment buffer. IVb. References http://www.realtek.com.tw/ -http://www.scyld.com/expert/NWay.html +http://web.archive.org/web/%2A/http://www.scyld.com/expert/NWay.html IVc. Errata diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index a42b687..766bb3b 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -21,8 +21,7 @@ Annapolis MD 21403 Support and updates available at - http://www.scyld.com/network/starfire.html - [link no longer provides useful info -jgarzik] + http://web.archive.org/web/%2A/http://www.scyld.com/network/starfire.html */ @@ -282,8 +281,8 @@ IV. Notes IVb. References The Adaptec Starfire manuals, available only from Adaptec. -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html +http://web.archive.org/web/%2A/http://www.scyld.com/expert/100mbps.html +http://web.archive.org/web/%2A/http://www.scyld.com/expert/NWay.html IVc. Errata diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 2678588..ee75916 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -15,7 +15,7 @@ Annapolis MD 21403 Support and updates available at - http://www.scyld.com/network/sundance.html + http://web.archive.org/web/%2A/http://www.scyld.com/network/sundance.html [link no longer provides useful info -jgarzik] Archives of the mailing list are still available at http://www.beowulf.org/pipermail/netdrivers/ @@ -193,8 +193,8 @@ IVb. References The Sundance ST201 datasheet, preliminary version. The Kendin KS8723 datasheet, preliminary version. The ICplus IP100 datasheet, preliminary version. -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html +http://web.archive.org/web/%2A/http://www.scyld.com/expert/100mbps.html +http://web.archive.org/web/%2A/http://www.scyld.com/expert/NWay.html IVc. Errata diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig index c4137b0..a196b54 100644 --- a/drivers/net/tokenring/Kconfig +++ b/drivers/net/tokenring/Kconfig @@ -101,7 +101,7 @@ config TMS380TR <http://www.tldp.org/docs.html#howto>. Also read the file <file:Documentation/networking/tms380tr.txt> or - check <http://www.auk.cx/tms380tr/>. + check <http://web.archive.org/web/%2A/http://www.auk.cx/tms380tr/>. To compile this driver as a module, choose M here: the module will be called tms380tr. diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 423eb26..7a303e0 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -305,7 +305,7 @@ config DSCC4 DSCC4 chipset. This is supposed to work with the four port card. Take a look at - <http://www.cogenit.fr/dscc4/> for further information about the + <http://web.archive.org/web/%2A/http://www.cogenit.fr/dscc4/> for further information about the driver. To compile this driver as a module, choose M here: the @@ -415,9 +415,9 @@ config CYCLADES_SYNC While no documentation is available at this time please grab the wanconfig tarball in - <http://www.conectiva.com.br/~acme/cycsyn-devel/> (with minor changes - to make it compile with the current wanrouter include files; efforts - are being made to use the original package available at + <http://web.archive.org/web/%2A/http://www.conectiva.com.br/~acme/cycsyn-dev…> + (with minor changes to make it compile with the current wanrouter include files; + efforts are being made to use the original package available at <ftp://ftp.sangoma.com/>). Feel free to contact me or the cycsyn-devel mailing list at @@ -481,8 +481,8 @@ config SBNI leased line modems. You can find more information and last versions of drivers and - utilities at <http://www.granch.ru/>. If you have any question you - can send email to <sbni(a)granch.ru>. + utilities at <http://web.archive.org/web/%2A/http://www.granch.ru>. + If you have any question you can send email to <sbni(a)granch.ru>. To compile this driver as a module, choose M here: the module will be called sbni. diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 04c6cd4..55cba46 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -28,7 +28,8 @@ * Masaryk University (http://www.ics.muni.cz/). The hardware is * developed by Jiri Novotny <novotny(a)ics.muni.cz>. More information * and the photo of both cards is available at - * http://www.pavoucek.cz/cosa.html. The card documentation, firmwares + * http://web.archive.org/web/20010412025813/http://www.pavoucek.cz/cosa.html + * The card documentation, firmwares * and other goods can be downloaded from ftp://ftp.ics.muni.cz/pub/cosa/. * For Linux-specific utilities, see below in the "Software info" section. * If you want to order the card, contact Jiri Novotny. diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index e050bd6..2abe321 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -126,8 +126,8 @@ module_param_array(fst_excluded_list, int, NULL, 0); /* The Am186CH/CC processors support a SmartDMA mode using circular pools * of buffer descriptors. The structure is almost identical to that used * in the LANCE Ethernet controllers. Details available as PDF from the - * AMD web site: http://www.amd.com/products/epd/processors/\ - * 2.16bitcont/3.am186cxfa/a21914/21914.pdf + * AMD web site: + * http://web.archive.org/web/%2A/http://www.amd.com/products/epd/processors/2… */ struct txdesc { /* Transmit descriptor */ volatile u16 ladr; /* Low order address of packet. This is a diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index cff13a9..e8e77e9 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -8,7 +8,7 @@ * Driver supports SBNI12-02,-04,-05,-10,-11 cards, single and * double-channel, PCI and ISA modifications. * More info and useful utilities to work with SBNI12 cards you can find - * at http://www.granch.com (English) or http://www.granch.ru (Russian) + * at http://web.archive.org/web/%2A/http://www.granch.com * * This software may be used and distributed according to the terms * of the GNU General Public License. diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index 69a9b34..b2e300d 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -25,7 +25,7 @@ * 802.11 (802.11e mostly) papers and by reading various public available * Atheros presentations and papers like these: * - * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf + * 5210 - http://web.archive.org/web/%2A/http://nova.stanford.edu/~bbaas/ps/isscc2002… * * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf * diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba54d1b..6ce7d7e 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -215,7 +215,7 @@ static int prism2_pccard_card_present(local_info_t *local) /* * SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0 * Document No. 20-10-00058, January 2004 - * http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf + * http://web.archive.org/web/%2A/http://www.sandisk.com/pdf/industrial/ProdMa… */ #define SANDISK_WLAN_ACTIVATION_OFF 0x40 #define SANDISK_HCR_OFF 0x42 diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 855f389..3017185 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -18,8 +18,8 @@ menuconfig PARPORT <file:drivers/parport/BUGS-parport>. For extensive information about drivers for many devices attaching - to the parallel port see <http://www.torque.net/linux-pp.html> on - the WWW. + to the parallel port see + <http://web.archive.org/web/%2A/http://www.torque.net/linux-pp.html> It is possible to share a single parallel port among several devices and it is safe to compile all the corresponding drivers into the diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index a8587f1..53c645a 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -39,7 +39,7 @@ config SCSI_ARXESCSI HD discs from the then new A5000 on earlier models. This interface was either sold on its own or with an integral SCSI controller. Technical details on this NCR53c94-based device are available at - <http://www.cryton.demon.co.uk/acornbits/scsi_arxe.html> + <http://web.archive.org/web/%2A/http://www.cryton.demon.co.uk/acornbits/scsi…> Say Y here to compile in support for the SCSI controller. config SCSI_CUMANA_2 diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c index 9a4b69d..d435686 100644 --- a/drivers/scsi/ibmmca.c +++ b/drivers/scsi/ibmmca.c @@ -7,8 +7,8 @@ See the file Documentation/scsi/ibmmca.txt for a detailed description of this driver, the commandline arguments and the history of its development. - See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest - updates, info and ADF-files for adapters supported by this driver. + See the WWW-page: http://web.archive.org/web/%2A/http://www.uni-mainz.de/~langm000/linux.html + for latest updates, info and ADF-files for adapters supported by this driver. Alan Cox <alan(a)lxorguk.ukuu.org.uk> Updated for Linux 2.5.45 to use the new error handler, cleaned up the diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index f8d8a00..8e8ba66 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -30,7 +30,7 @@ /* * Altera UART register definitions according to the Nios UART datasheet: - * http://www.altera.com/literature/ds/ds_nios_uart.pdf + * http://web.archive.org/web/%2A/http://www.altera.com/literature/ds/ds_nios_… */ #define ALTERA_UART_SIZE 32 diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index cff9a30..f7edc78 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -34,7 +34,7 @@ * * For further information regarding this notice, see: * - * http://oss.sgi.com/projects/GenInfo/NoticeExplan + * http://web.archive.org/web/%2A/http://oss.sgi.com/projects/GenInfo/NoticeEx… */ #include <linux/interrupt.h> diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c index e0ac825..aca9f51 100644 --- a/drivers/staging/comedi/drivers/c6xdigio.c +++ b/drivers/staging/comedi/drivers/c6xdigio.c @@ -2,7 +2,7 @@ comedi/drivers/c6xdigio.c Hardware driver for Mechatronic Systems Inc. C6x_DIGIO DSP daughter card. - (http://robot0.ge.uiuc.edu/~spong/mecha/) + (http://web.archive.org/web/%2A/http://robot0.ge.uiuc.edu/~spong/mecha/) COMEDI - Linux Control and Measurement Device Interface Copyright (C) 1999 Dan Block @@ -31,7 +31,7 @@ Devices: [Mechatronic Systems Inc.] C6x_DIGIO DSP daughter card (c6xdigio) Updated: Sun Nov 20 20:18:34 EST 2005 This driver will not work with a 2.4 kernel. -http://robot0.ge.uiuc.edu/~spong/mecha/ +http://web.archive.org/web/%2A/http://robot0.ge.uiuc.edu/~spong/mecha/ */ diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c index b44386a..b86dda1 100644 --- a/drivers/staging/comedi/drivers/pcl711.c +++ b/drivers/staging/comedi/drivers/pcl711.c @@ -41,7 +41,7 @@ supported. driver for the PCL-711. I used a few ideas from his driver here. His driver also has more comments, if you are interested in understanding how this driver works. - http://tech.buffalostate.edu/~dave/driver/ + http://web.archive.org/web/%2A/http://tech.buffalostate.edu/~dave/driver/ The ACL-8112 driver was hacked from the sources of the PCL-711 driver (the 744 chip used on the 8112 is almost the same as diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/go7007/go7007.txt index 06a76da..21a487c 100644 --- a/drivers/staging/go7007/go7007.txt +++ b/drivers/staging/go7007/go7007.txt @@ -415,10 +415,10 @@ in the TDA8290/TDA8275 tuner driver. The following patches must be downloaded from Gerd Knorr's website and applied in the order listed: - http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner - http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner2 - http://dl.bytesex.org/patches/2.6.11-2/v4l2-api-mpeg - http://dl.bytesex.org/patches/2.6.11-2/saa7134-update + http://web.archive.org/web/%2A/http://dl.bytesex.org/patches/2.6.11-2/i2c-t… + http://web.archive.org/web/%2A/http://dl.bytesex.org/patches/2.6.11-2/i2c-t… + http://web.archive.org/web/%2A/http://dl.bytesex.org/patches/2.6.11-2/v4l2-… + http://web.archive.org/web/%2A/http://dl.bytesex.org/patches/2.6.11-2/saa71… The following patches are included with this SDK and can be applied in any order: diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f5d0674..1eca35d 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -14,7 +14,7 @@ * See Documentation/usb/usb-serial.txt for more information on using this * driver * - * See http://geocities.com/i0xox0i for information on this driver and the + * See http://web.archive.org/web/%2A/http://geocities.com/i0xox0i for information on this driver and the * earthmate usb device. * * Lonnie Mendez <dignome(a)gmail.com> diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2c897ee..eac1adf 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -962,7 +962,7 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, * Only revision 1.13 tested (same for all of the above devices, * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. * Submitted by Marek Michalkiewicz <marekm(a)amelek.gda.pl>. - * See also http://martin.wilck.bei.t-online.de/#kecf . + * See also http://web.archive.org/web/20030808203106/http://martin.wilck.bei.t-online.… . */ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, "Datafab", diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index 43207cc..6cc8363 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -16,7 +16,7 @@ * Jacobowitz, Paul Mackerras, Fabio Riccardi, and Geert Uytterhoeven. * * The VideoToolbox "Bugs" web page at - * http://rajsky.psych.nyu.edu/Tips/VideoBugs.html + * http://web.archive.org/web/%2A/http://rajsky.psych.nyu.edu/Tips/VideoBugs.h… * * This code is free software. You may copy, modify, and distribute * it subject to the terms and conditions of the GNU General Public diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c index dce8c97..fa121b6 100644 --- a/drivers/video/s3fb.c +++ b/drivers/video/s3fb.c @@ -7,7 +7,7 @@ * License. See the file COPYING in the main directory of this archive for * more details. * - * Code is based on David Boucher's viafb (http://davesdomain.org.uk/viafb/) + * Code is based on David Boucher's viafb (http://web.archive.org/web/%2A/http://davesdomain.org.uk/viafb/) * which is based on the code of neofb. */ diff --git a/drivers/video/svgalib.c b/drivers/video/svgalib.c index fdb4567..b4c87d0 100644 --- a/drivers/video/svgalib.c +++ b/drivers/video/svgalib.c @@ -7,7 +7,7 @@ * License. See the file COPYING in the main directory of this archive for * more details. * - * Some parts are based on David Boucher's viafb (http://davesdomain.org.uk/viafb/) + * Some parts are based on David Boucher's viafb (http://web.archive.org/web/20071125103157/http://davesdomain.org.uk/viafb/) */ #include <linux/module.h> diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c index 85d76ec..d77d725 100644 --- a/drivers/video/vt8623fb.c +++ b/drivers/video/vt8623fb.c @@ -9,7 +9,7 @@ * more details. * * Code is based on s3fb, some parts are from David Boucher's viafb - * (http://davesdomain.org.uk/viafb/) + * (http://web.archive.org/web/%2A/http://davesdomain.org.uk/viafb/) */ #include <linux/module.h> diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index 06f7922..0f8b2d7 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -46,7 +46,7 @@ */ /* - * A bells and whistles driver is available from http://www.pcwd.de/ + * A bells and whistles driver is available from http://web.archive.org/web/%2A/http://www.pcwd.de/ * More info available at http://www.berkprod.com/ or * http://www.pcwatchdog.com/ */ diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig index c931cf2..15cf9cf 100644 --- a/fs/ncpfs/Kconfig +++ b/fs/ncpfs/Kconfig @@ -17,7 +17,8 @@ config NCP_FS file *server* for Novell NetWare clients. General information about how to connect Linux, Windows machines and - Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. + Macs is on the WWW at + <http://web.archive.org/web/20011204193118/http://www.eats.com/linux_mac_win…>. To compile this as a module, choose M here: the module will be called ncpfs. Say N unless you are connected to a Novell network. diff --git a/fs/nls/Kconfig b/fs/nls/Kconfig index a39edc4..4322501 100644 --- a/fs/nls/Kconfig +++ b/fs/nls/Kconfig @@ -416,7 +416,7 @@ config NLS_ISO8859_14 input/output character sets. Say Y here for the Latin 8 character set, which adds the last accented vowels for Welsh (aka Cymraeg) (and Manx Gaelic) that were missing in Latin 1. - <http://linux.speech.cymru.org/> has further information. + <http://web.archive.org/web/%2A/http://linux.speech.cymru.org> has further information. config NLS_ISO8859_15 tristate "NLS ISO 8859-15 (Latin 9; Western European Languages with Euro)" diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c index 44a88a9..7ef7118 100644 --- a/fs/nls/nls_base.c +++ b/fs/nls/nls_base.c @@ -23,7 +23,7 @@ static DEFINE_SPINLOCK(nls_lock); /* * Sample implementation from Unicode home page. - * http://www.stonehand.com/unicode/standard/fss-utf.html + * http://web.archive.org/web/19970105220809/http://stonehand.com/unicode/stan… */ struct utf8_table { int cmask; diff --git a/fs/reiserfs/procfs.c b/fs/reiserfs/procfs.c index 7a99811..37b40fa 100644 --- a/fs/reiserfs/procfs.c +++ b/fs/reiserfs/procfs.c @@ -555,13 +555,13 @@ int reiserfs_proc_info_global_done(void) * . remove remove_save_link() from reiserfs_do_truncate() * * I accept terms and conditions stated in the Legal Agreement - * (available at http://www.namesys.com/legalese.html) + * (available at http://web.archive.org/web/%2A/http://www.namesys.com/legalese.html) * * Revision 1.1.8.1 2001/07/11 16:48:50 god * proc info support * * I accept terms and conditions stated in the Legal Agreement - * (available at http://www.namesys.com/legalese.html) + * (available at http://web.archive.org/web/%2A/http://www.namesys.com/legalese.html) * */ diff --git a/include/linux/edd.h b/include/linux/edd.h index 4cbd0fe..557227c 100644 --- a/include/linux/edd.h +++ b/include/linux/edd.h @@ -6,8 +6,9 @@ * structures and definitions for the int 13h, ax={41,48}h * BIOS Enhanced Disk Drive Services * This is based on the T13 group document D1572 Revision 0 (August 14 2002) - * available at http://www.t13.org/docs2002/d1572r0.pdf. It is - * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf + * available at http://web.archive.org/web/%2A/http://www.t13.org/docs2002/d1572r0.pdf. + * It is very similar to D1484 Revision 3 + * http://web.archive.org/web/%2A/http://www.t13.org/docs2002/d1484r3.pdf * * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch * table in the boot_params that contains a list of BIOS-enumerated diff --git a/include/linux/mtd/pismo.h b/include/linux/mtd/pismo.h index 8dfb7e1..c2d6e75 100644 --- a/include/linux/mtd/pismo.h +++ b/include/linux/mtd/pismo.h @@ -1,5 +1,5 @@ /* - * PISMO memory driver - http://www.pismoworld.org/ + * PISMO memory driver - http://web.archive.org/web/%2A/http://www.pismoworld.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/scsi/sg.h b/include/scsi/sg.h index a9f3c6f..19d4d85 100644 --- a/include/scsi/sg.h +++ b/include/scsi/sg.h @@ -16,7 +16,7 @@ Version 2 and 3 extensions to driver: Version: 3.5.34 (20060920) This version is for 2.6 series kernels. - For a full changelog see http://www.torque.net/sg + For a full changelog see http://web.archive.org/web/%2A/http://www.torque.net/sg Map of SG verions to the Linux kernels in which they appear: ---------- ---------------------------------- @@ -52,17 +52,17 @@ Major new features in SG 3.x driver (cf SG 2.x drivers) Documentation ============= A web site for the SG device driver can be found at: - http://www.torque.net/sg [alternatively check the MAINTAINERS file] + http://web.archive.org/web/%2A/http://www.torque.net/sg The documentation for the sg version 3 driver can be found at: - http://www.torque.net/sg/p/sg_v3_ho.html + http://web.archive.org/web/%2A/http://www.torque.net/sg/p/sg_v3_ho.html This is a rendering from DocBook source [change the extension to "sgml" or "xml"]. There are renderings in "ps", "pdf", "rtf" and "txt" (soon). The SG_IO ioctl is now found in other parts kernel (e.g. the block layer). For more information see http://www.torque.net/sg/sg_io.html The older, version 2 documents discuss the original sg interface in detail: - http://www.torque.net/sg/p/scsi-generic.txt - http://www.torque.net/sg/p/scsi-generic_long.txt + http://web.archive.org/web/%2A/http://www.torque.net/sg/p/scsi-generic.txt + http://web.archive.org/web/%2A/http://www.torque.net/sg/p/scsi-generic_long… Also available: <kernel_source>/Documentation/scsi/scsi-generic.txt Utility and test programs are available at the sg web site. They are diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index a90050d..7defdc3 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -271,8 +271,8 @@ config IP_PIMSM_V1 Kernel side support for Sparse Mode PIM (Protocol Independent Multicast) version 1. This multicast routing protocol is used widely because Cisco supports it. You need special software to use it - (pimd-v1). Please see <http://netweb.usc.edu/pim/> for more - information about PIM. + (pimd-v1). Please see <http://web.archive.org/web/%2A/http://netweb.usc.edu/pim/> + for more information about PIM. Say Y if you want to use PIM-SM v1. Note that you can say N here if you just want to use Dense Mode PIM. diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c index d84140c..e8448e3 100644 --- a/net/ipv4/tcp_illinois.c +++ b/net/ipv4/tcp_illinois.c @@ -1,7 +1,7 @@ /* * TCP Illinois congestion control. * Home page: - * http://www.ews.uiuc.edu/~shaoliu/tcpillinois/index.html + * http://web.archive.org/web/%2A/http://www.ews.uiuc.edu/~shaoliu/tcpillinois… * * The algorithm is described in: * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm diff --git a/net/ipv4/tcp_lp.c b/net/ipv4/tcp_lp.c index de87037..b88c17b 100644 --- a/net/ipv4/tcp_lp.c +++ b/net/ipv4/tcp_lp.c @@ -22,7 +22,7 @@ * Original Author: * Aleksandar Kuzmanovic <akuzma(a)northwestern.edu> * Available from: - * http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf + * http://web.archive.org/web/%2A/http://www.ece.rice.edu/~akuzma/Doc/akuzma/T… * Original implementation for 2.4.19: * http://www-ece.rice.edu/networks/TCP-LP/ * diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index c6990c6..1f41e97 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -421,7 +421,7 @@ config SND_MSND_CLASSIC See <file:Documentation/sound/oss/MultiSound> for important information about this driver. Note that it has been discontinued, but the Voyetra Turtle Beach knowledge base entry for it is still available - at <http://www.turtlebeach.com/site/kb_ftp/790.asp>. + at <http://web.archive.org/web/20050407083114/http://www.turtlebeach.com/site/k…>. To compile this driver as a module, choose M here: the module will be called snd-msnd-classic. diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index fe79a16..64c936c 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -1,7 +1,7 @@ /* * Driver for C-Media's CMI8330 and CMI8329 soundcards. * Copyright (c) by George Talusan <gstalusan(a)uwaterloo.ca> - * http://www.undergrad.math.uwaterloo.ca/~gstalusa + * http://web.archive.org/web/%2A/http://www.undergrad.math.uwaterloo.ca/~gsta… * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index a513651..3db52d3 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -36,7 +36,7 @@ config SOUND_MSNDCLAS See <file:Documentation/sound/oss/MultiSound> for important information about this driver. Note that it has been discontinued, but the Voyetra Turtle Beach knowledge base entry for it is still available - at <http://www.turtlebeach.com/site/kb_ftp/790.asp>. + at <http://web.archive.org/web/%2A/http://www.undergrad.math.uwaterloo.ca/~gsta…>. comment "Compiled-in MSND Classic support requires firmware during compilation." depends on SOUND_PRIME && SOUND_MSNDCLAS=y @@ -98,7 +98,7 @@ config SOUND_MSNDPIN See <file:Documentation/sound/oss/MultiSound> for important information about this driver. Note that it has been discontinued, but the Voyetra Turtle Beach knowledge base entry for it is still available - at <http://www.turtlebeach.com/site/kb_ftp/600.asp>. + at <http://web.archive.org/web/%2A/http://www.turtlebeach.com/site/kb_ftp/600.a…>. comment "Compiled-in MSND Pinnacle support requires firmware during compilation." depends on SOUND_PRIME && SOUND_MSNDPIN=y diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index e68c98e..de4641c 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -3874,7 +3874,7 @@ static int patch_lm4550(struct snd_ac97 *ac97) } /* - * UCB1400 codec (http://www.semiconductors.philips.com/acrobat_download/datasheets/UCB1400-0…) + * UCB1400 codec (http://web.archive.org/web/%2A/http://www.semiconductors.philips.com/acroba…) */ static const struct snd_kcontrol_new snd_ac97_controls_ucb1400[] = { /* enable/disable headphone driver which allows direct connection to diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c index 5a60492..90c36a4 100644 --- a/sound/pci/nm256/nm256.c +++ b/sound/pci/nm256/nm256.c @@ -6,7 +6,7 @@ * The original author of OSS nm256 driver wishes to remain anonymous, * so I just put my acknoledgment to him/her here. * The original author's web page is found at - * http://www.uglx.org/sony.html + * http://web.archive.org/web/%2A/http://www.uglx.org/sony.html * * * This program is free software; you can redistribute it and/or modify -- 1.7.2.1

1 0

[alsa-devel] encoded media offload
by Agarwal, Lomesh 24 Sep '10

24 Sep '10

Hi, I am working on board which has audio DSP. DSP can decode MP3 media. Current Linux shipped with the board sends only PCM thru ALSA stack. I wanted to see if I can offload MP3 playback. I heard that present ALSA doesn't support MP3. Wondering if somebody can enumerate the possible problems. Thanks, Lomesh

1 0