August 2010 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: Log WM8994 separate ADC LRCLKs every time we configure
by Mark Brown 23 Aug '10

23 Aug '10

This makes it that little bit easier to spot the diagnostics in the logs. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 12 ++++++++---- 1 files changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 76a066e..e03072c 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3316,20 +3316,24 @@ static int wm8994_hw_params(struct snd_pcm_substream *substream, bclk_reg = WM8994_AIF1_BCLK; rate_reg = WM8994_AIF1_RATE; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || - wm8994->lrclk_shared[0]) + wm8994->lrclk_shared[0]) { lrclk_reg = WM8994_AIF1DAC_LRCLK; - else + } else { lrclk_reg = WM8994_AIF1ADC_LRCLK; + dev_dbg(codec->dev, "AIF1 using split LRCLK\n"); + } break; case 2: aif1_reg = WM8994_AIF2_CONTROL_1; bclk_reg = WM8994_AIF2_BCLK; rate_reg = WM8994_AIF2_RATE; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || - wm8994->lrclk_shared[1]) + wm8994->lrclk_shared[1]) { lrclk_reg = WM8994_AIF2DAC_LRCLK; - else + } else { lrclk_reg = WM8994_AIF2ADC_LRCLK; + dev_dbg(codec->dev, "AIF2 using split LRCLK\n"); + } break; default: return -EINVAL; -- 1.7.1

2 1

[alsa-devel] [PATCH - HDA-Intel.conf 1/1] HDA-Intel: do not lock IEC958 Playback switch
by Pierre-Louis Bossart 23 Aug '10

23 Aug '10

As discussed with Takashi, removing the lock allows apps to mute the output using the mixer interface. Other AES controls remain locked. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)intel.com> diff --git a/src/conf/cards/HDA-Intel.conf b/src/conf/cards/HDA-Intel.conf index 726e8c9..f7eecb4 100644 --- a/src/conf/cards/HDA-Intel.conf +++ b/src/conf/cards/HDA-Intel.conf @@ -111,8 +111,6 @@ HDA-Intel.pcm.iec958.0 { } { name "IEC958 Playback Switch" - lock true - preserve true value true } ] @@ -184,8 +182,6 @@ HDA-Intel.pcm.hdmi.common { { name "IEC958 Playback Switch" index $CTLINDEX - lock true - preserve true value true } ] -- 1.7.2.1

2 1

[alsa-devel] [PATCH 1/5] mfd: add codec resource into 88pm860x driver
by Haojian Zhuang 23 Aug '10

23 Aug '10

3 3

[alsa-devel] [PATCH] tlv32aic3x: Use driver_data to pass codec model id
by Randolph Chung 23 Aug '10

23 Aug '10

Per Mark's suggestion, use a cleaner syntax for passing the model id. Signed-off-by: Randolph Chung <tausq(a)parisc-linux.org> --- sound/soc/codecs/tlv320aic3x.c | 13 ++++--------- 1 files changed, 4 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index c074657..fc07986 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1327,9 +1327,9 @@ static struct snd_soc_codec_driver soc_codec_dev_aic3x = { */ static const struct i2c_device_id aic3x_i2c_id[] = { - [AIC3X_MODEL_3X] = { "tlv320aic3x", 0 }, - [AIC3X_MODEL_33] = { "tlv320aic33", 0 }, - [AIC3X_MODEL_3007] = { "tlv320aic3007", 0 }, + { "tlv320aic3x", AIC3X_MODEL_3X }, + { "tlv320aic33", AIC3X_MODEL_33 }, + { "tlv320aic3007", AIC3X_MODEL_3007 }, { } }; MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id); @@ -1345,7 +1345,6 @@ static int aic3x_i2c_probe(struct i2c_client *i2c, struct aic3x_setup_data *setup = pdata->setup; struct aic3x_priv *aic3x; int ret, i; - const struct i2c_device_id *tbl; aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL); if (aic3x == NULL) { @@ -1366,11 +1365,7 @@ static int aic3x_i2c_probe(struct i2c_client *i2c, gpio_direction_output(aic3x->gpio_reset, 0); } - for (tbl = aic3x_i2c_id; tbl->name[0]; tbl++) { - if (!strcmp(tbl->name, id->name)) - break; - } - aic3x->model = tbl - aic3x_i2c_id; + aic3x->model = id->driver_data; for (i = 0; i < ARRAY_SIZE(aic3x->supplies); i++) aic3x->supplies[i].supply = aic3x_supply_names[i]; -- 1.6.2.5

2 1

[alsa-devel] [PATCH] ASoC: Fix tlv320aic3x GPIO initialization
by Jarkko Nikula 23 Aug '10

23 Aug '10

aic3x_init does a soft reset first and thus TLV320AIC3x GPIO setup must be done after doing the basic init. Before multi-component the init was done at i2c probe time and GPIO setup at soc probe time. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> Acked-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- This got lost during multi-component work. Now rebased on recent aix3x changes so that applies with git am. I took freedom to add Mark's acked-by, see: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-August/030278.html --- sound/soc/codecs/tlv320aic3x.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index c074657..efae8b5 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1281,6 +1281,8 @@ static int aic3x_probe(struct snd_soc_codec *codec) codec->hw_write = (hw_write_t) i2c_master_send; codec->control_data = aic3x->control_data; + aic3x_init(codec); + if (aic3x->setup) { /* setup GPIO functions */ aic3x_write(codec, AIC3X_GPIO1_REG, @@ -1289,8 +1291,6 @@ static int aic3x_probe(struct snd_soc_codec *codec) (aic3x->setup->gpio_func[1] & 0xf) << 4); } - aic3x_init(codec); - snd_soc_add_controls(codec, aic3x_snd_controls, ARRAY_SIZE(aic3x_snd_controls)); if (aic3x->model == AIC3X_MODEL_3007) -- 1.7.1

1 0

[PATCH] ALSA: HDA: Fix front mic on Dell Precision M6500
by David Henningsson 23 Aug '10

23 Aug '10

The BIOS of Dell Precision M6500 lists both 0x0e and 0x11 as front mics, and the driver only supports one front mic. This commit adds a quirk for preferring node 0x11 (internal mic) to node 0x0e (possibly docking station mic). Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_sigmatel.c | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 95148e5..656c54b 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -95,6 +95,7 @@ enum { STAC_DELL_S14, STAC_92HD83XXX_HP, STAC_HP_DV7_4000, + STAC_DELL_M6500, STAC_92HD83XXX_MODELS }; @@ -1633,6 +1634,14 @@ static unsigned int dell_s14_pin_configs[10] = { 0x40f000f0, 0x40f000f0, }; +/* Dell Precision M6500, make sure 0x0e is silenced */ +static unsigned int dell_m6500_pin_configs[10] = { + 0x03a11030, 0x0321101f, 0x400000f0, 0x90170110, + 0x400000f0, 0x23011050, 0x400000f0, 0x90a10120, + 0x014613b0, 0x400000f0, +}; + + static unsigned int hp_dv7_4000_pin_configs[10] = { 0x03a12050, 0x0321201f, 0x40f000f0, 0x90170110, 0x40f000f0, 0x40f000f0, 0x90170110, 0xd5a30140, @@ -1643,6 +1652,7 @@ static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs, [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs, [STAC_DELL_S14] = dell_s14_pin_configs, + [STAC_DELL_M6500] = dell_m6500_pin_configs, [STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs, }; @@ -1651,6 +1661,7 @@ static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = "ref", [STAC_92HD83XXX_PWR_REF] = "mic-ref", [STAC_DELL_S14] = "dell-s14", + [STAC_DELL_M6500] = "dell-m6500", [STAC_92HD83XXX_HP] = "hp", [STAC_HP_DV7_4000] = "hp-dv7-4000", }; @@ -1663,6 +1674,8 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD83XXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba, "unknown Dell", STAC_DELL_S14), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ef, + "Dell M6500", STAC_DELL_M6500), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600, "HP", STAC_92HD83XXX_HP), {} /* terminator */ -- 1.7.0.4 --------------090605010908020304020004--

1 0

[alsa-devel] ASoC i.MX ssi: use SSI_STCCR in synchronous mode
by Sascha Hauer 23 Aug '10

23 Aug '10

Hi, Please consider applying this for -rc. Sascha In synchronous mode the SSI_SRCCR values are ignored. Instead SSI_STCCR must be used for both receiving and transmitting. Signed-off-by: Sascha Hauer <s.hauer(a)pengutronix.de> --- sound/soc/imx/imx-ssi.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c index a11daa1..c81da05 100644 --- a/sound/soc/imx/imx-ssi.c +++ b/sound/soc/imx/imx-ssi.c @@ -254,6 +254,9 @@ static int imx_ssi_hw_params(struct snd_pcm_substream *substream, dma_data = &ssi->dma_params_rx; } + if (ssi->flags & IMX_SSI_SYN) + reg = SSI_STCCR; + snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); sccr = readl(ssi->base + reg) & ~SSI_STCCR_WL_MASK; -- 1.7.1 -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

1 0

[alsa-devel] [PATCH] Add support for Lenovo S10-3t
by Jerone Young 23 Aug '10

23 Aug '10

This patch adds quirk for the Lenovo S10-3t so the headphone & microphone jacks will now work. Signed-off-by: Jerone Young <jerone.young(a)canonical.com> diff --git a/pci/hda/patch_conexant.c b/pci/hda/patch_conexant.c index c424952..6bee4fc 100644 --- a/pci/hda/patch_conexant.c +++ b/pci/hda/patch_conexant.c @@ -3061,6 +3061,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G series", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G series (AMD)", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x17aa, 0x390a, "Lenovo S10-3t", CXT5066_IDEAPAD), {} };

2 1

[PATCH] ALSA: HDA: Add Sony VAIO quirk for ALC269
by David Henningsson 23 Aug '10

23 Aug '10

BugLink: http://launchpad.net/bugs/618271 Cc: stable(a)kernel.org Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a4dd045..627bf99 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14467,6 +14467,7 @@ static const struct alc_fixup alc269_fixups[] = { static struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_FIXUP_SONY_VAIO), + SND_PCI_QUIRK(0x104d, 0x9077, "Sony VAIO", ALC269_FIXUP_SONY_VAIO), {} }; -- 1.7.0.4 --------------050802040905060106010704--

1 0

[PATCH] ALSA: HDA: Add Sony VAIO quirk for ALC269
by David Henningsson 23 Aug '10

23 Aug '10

Signed-off-by: David Henningsson <david.henningsson(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a4dd045..627bf99 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14467,6 +14467,7 @@ static const struct alc_fixup alc269_fixups[] = { static struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_FIXUP_SONY_VAIO), + SND_PCI_QUIRK(0x104d, 0x9077, "Sony VAIO", ALC269_FIXUP_SONY_VAIO), {} }; -- 1.7.0.4 --------------090606080103020107010306--

1 0