May 2010 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: Update Freescale i.MX SSI driver
by Stuart Longland 24 May '10

24 May '10

Hi all, Attached is a patch that corrects the i.MX SSI driver so that it compiles against the latest ASoC tree. I'm able to compile the driver with this patch, but haven't done any testing beyond this point... the update is quite naïve, based on changes I had seen to other drivers. I hope to give it a try on Monday, but in the meantime, here's the patch for others to try. -- Stuart Longland (aka Redhatter, VK4MSL) .'''. Gentoo Linux/MIPS Cobalt and Docs Developer '.'` : . . . . . . . . . . . . . . . . . . . . . . .'.' http://dev.gentoo.org/~redhatter :.' I haven't lost my mind... ...it's backed up on a tape somewhere.

3 2

Re: [alsa-devel] [PATCH v3] NUC900/audio: Add nuc900 audio driver
by Mark Brown 24 May '10

24 May '10

On Sat, May 22, 2010 at 09:46:31PM +0800, Wan ZongShun wrote: > Dear Liam & Mark, > > This patch fixed some issues according to your comments. > Here and now, I adjusted the driver and called it v3 for resubmitting. Since your patch has already been applied please submit incremental updates rather than a revised version of the full patch.

2 1

[alsa-devel] [PATCH 024/199] Documentation/sound/alsa/emu10k1-jack.txt: Checkpatch cleanup
by Andrea Gelmini 23 May '10

23 May '10

Documentation/sound/alsa/emu10k1-jack.txt:3: ERROR: trailing whitespace Documentation/sound/alsa/emu10k1-jack.txt:39: ERROR: trailing whitespace Documentation/sound/alsa/emu10k1-jack.txt:58: ERROR: trailing whitespace Signed-off-by: Andrea Gelmini <andrea.gelmini(a)gelma.net> --- Documentation/sound/alsa/emu10k1-jack.txt | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/sound/alsa/emu10k1-jack.txt b/Documentation/sound/alsa/emu10k1-jack.txt index 751d450..3cc6548 100644 --- a/Documentation/sound/alsa/emu10k1-jack.txt +++ b/Documentation/sound/alsa/emu10k1-jack.txt @@ -1,6 +1,6 @@ This document is a guide to using the emu10k1 based devices with JACK for low latency, multichannel recording functionality. All of my recent work to allow -Linux users to use the full capabilities of their hardware has been inspired +Linux users to use the full capabilities of their hardware has been inspired by the kX Project. Without their work I never would have discovered the true power of this hardware. @@ -36,7 +36,7 @@ The 16 input ports are connected to the 16 physical inputs. Contrary to popular belief, all emu10k1 cards are multichannel cards. Which of these input channels have physical inputs connected to them depends on the card model. Trial and error is highly recommended; the pinout diagrams -for the card have been reverse engineered by some enterprising kX users and are +for the card have been reverse engineered by some enterprising kX users and are available on the internet. Meterbridge is helpful here, and the kX forums are packed with useful information. @@ -55,7 +55,7 @@ JACK Epilog FXBUS2(nr) -------------------------------------------- capture_1 asio14 FXBUS2(0xe) capture_2 asio15 FXBUS2(0xf) -capture_3 asio0 FXBUS2(0x0) +capture_3 asio0 FXBUS2(0x0) ~capture_4 Center EXTOUT(0x11) // mapped to by Center ~capture_5 LFE EXTOUT(0x12) // mapped to by LFE capture_6 asio3 FXBUS2(0x3) -- 1.7.1.251.gf80a2

1 1

[alsa-devel] [PATCH 092/199] Documentation/sound/oss/ALS: Checkpatch cleanup
by Andrea Gelmini 23 May '10

23 May '10

Documentation/sound/oss/ALS:15: ERROR: trailing whitespace Documentation/sound/oss/ALS:40: ERROR: trailing whitespace Documentation/sound/oss/ALS:55: ERROR: trailing whitespace Documentation/sound/oss/ALS:56: ERROR: trailing whitespace Signed-off-by: Andrea Gelmini <andrea.gelmini(a)gelma.net> --- Documentation/sound/oss/ALS | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/sound/oss/ALS b/Documentation/sound/oss/ALS index d01ffbf..282a2e1 100644 --- a/Documentation/sound/oss/ALS +++ b/Documentation/sound/oss/ALS @@ -12,7 +12,7 @@ SB16 driver). To use an ALS sound card under Linux, enable the following options as modules in the sound configuration section of the kernel config: - 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support - - FM synthesizer (YM3812/OPL-3) support + - FM synthesizer (YM3812/OPL-3) support - standalone MPU401 support may be required for some cards; for the ALS-007, when using isapnptools, it is required Since the ALS-007/100/200 are PnP cards, ISAPnP support should probably be @@ -37,7 +37,7 @@ requires they be different. For "sb", "io", "irq" and "dma" should be set to the same values used to configure the audio section of the card with isapnp. "dma16" should be explicitly set to "-1" for an ALS-007 since this card does not have a 16 bit dma channel; if not specified the kernel will -default to using channel 5 anyway which will cause audio not to work. +default to using channel 5 anyway which will cause audio not to work. "mpu_io" should be set to 0. The "io" parameter of the "opl3" module should also agree with the setting used by isapnp. To get the MPU401 interface working on an ALS-007 card, the "mpu401" module will be required since this @@ -52,8 +52,8 @@ The resulting sound driver will provide the following capabilities: - Software selection of record source (line in, CD, FM, mic, master) - Record and playback of midi data via the external MPU-401 - Playback of midi data using inbuilt FM synthesizer - - Control of the ALS-007 mixer via any OSS-compatible mixer programs. - Controls available are Master (L&R), Line in (L&R), CD (L&R), + - Control of the ALS-007 mixer via any OSS-compatible mixer programs. + Controls available are Master (L&R), Line in (L&R), CD (L&R), DSP/PCM/audio out (L&R), FM (L&R) and Mic in (mono). Jonathan Woithe -- 1.7.1.251.gf80a2

1 13

[alsa-devel] snd_intel_hda : broken microphone
by mutenmaster＠tiscali.it 23 May '10

23 May '10

hello people, i am really determined in letting you know, for the third time, that my front mic input does not work. i do not know if the rear one works, i suspect not, but it's not important, because before the following commit, the front mic input worked: $ sudo git bisect bad f5271101faf1655d862849f42518c2a88ef394fb is the first bad commit commit f5271101faf1655d862849f42518c2a88ef394fb Author: Lydia Wang <lydiawang(a)viatech.com.cn> Date: Sat Oct 10 19:07: 35 2009 +0800 ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE control type Enter low power state if AA-Path volume is muted. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> Signed-off-by: Logan Li <loganli(a)viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse. de> :040000 040000 ab1ae14ff67f0b08848faeb3ad68def7f3e727f0 0bfbfde11fe32e87e8edbdb3c4d03c2d30370393 M sound i'm copypasting the lspci ouput, so that you can have a general idea of what kind of machine i have. please let me know if there is any other info you need to solve this bug. more details on the problem: doing $ arecord -f cd test.wav produces a file of 44 bytes. it's as if no microphone is attached to the jack. this behaviour has been evolving from the commit i showed you forth. at the beginning, a file with actual data was produced, but no audio came out of the speakers when reproducing it. going on with the commits, the file became 44 bytes long. yours, vasilis -- $ lspci -vvv 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate Subsystem: ASUSTeK Computer Inc. Device 83a2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 3.00 Link Frequency 0: [b] Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [54] HyperTransport: UnitID Clumping Capabilities: [40] HyperTransport: Retry Mode Capabilities: [9c] HyperTransport: #1a Capabilities: [f8] HyperTransport: #1c 00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME- Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 2, PowerLimit 75.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0f00c Data: 4159 Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 83a2 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> Kernel driver in use: pcieport-driver 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME- Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # a, PowerLimit 25.000000; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0f00c Data: 4161 Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 83a2 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information <?> Capabilities: [110] Virtual Channel <?> Kernel driver in use: pcieport-driver 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8000 [size=16] Region 5: Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] SATA HBA <?> Kernel driver in use: ahci 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe9fe000 (32-bit, non- prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe9fd000 (32-bit, non- prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9ff800 (32- bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+, D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog- if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe9fb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog- if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME- Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port: BAR=1 offset=00e0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx- Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable- Address: 00000000 Data: 0000 Kernel driver in use: pata_atiixp 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) Subsystem: ASUSTeK Computer Inc. Device 836c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe9f4000 (64-bit, non- prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+, D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec- latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 8389 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe9fa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: [b] Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: amd64_edac_mod 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> 00: 18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller: ATI Technologies Inc Device 954f (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 02a8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at d000 [size=256] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME- Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Vendor Specific Information <?> 01:00.1 Audio device: ATI Technologies Inc Device aa38 Subsystem: ASUSTeK Computer Inc. Device aa38 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 28 Region 0: Memory at feaec000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5 GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De- emphasis Level: -6dB Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+ Address: 00000000fee0f00c Data: 4189 Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 83a3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K] Expansion ROM at febf0000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+, D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+ Address: 00000000fee0f00c Data: 4179 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4 Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [cc] Vital Product Data <?> Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: r8169 Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli 14,95 € al mese. Gratis la Sim Tiscali Mobile con 25 euro di traffico! L'offerta è valida solo se attivi entro il 20/05/10 http://abbonati.tiscali.it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT…

2 1

Re: [alsa-devel] [PATCH] ALSA: hda: Use LPIB for Toshiba A100-259
by Daniel Chen 22 May '10

22 May '10

(Sorry for top posting due to MUA) Convention is to sort ascending; 0x1106 proceeds 0x1043. On May 22, 2010 3:27 PM, "Paul Menzel" <paulepanter(a)users.sourceforge.net> wrote: Dear Daniel, Am Samstag, den 22.05.2010, 13:25 -0400 schrieb Daniel Chen: […] > - SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB), > SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), > + SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB), > + SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB), Is not »m« before »p« in the alphabet? Thanks, Paul _______________________________________________ Alsa-devel mailing list Alsa-devel(a)alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

1 0

[PATCH] ASoC: Update Freescale i.MX SSI driver DMA parameter handling
by Stuart Longland 22 May '10

22 May '10

This updates the i.MX SSI driver to make it compatible with the ASoC tree following the move of DMA parameters from the DAI to the audio substream object. Signed-off-by: Stuart Longland <redhatter(a)gentoo.org> --- sound/soc/imx/imx-pcm-dma-mx2.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c index 2b31ac6..05f19c9 100644 --- a/sound/soc/imx/imx-pcm-dma-mx2.c +++ b/sound/soc/imx/imx-pcm-dma-mx2.c @@ -73,7 +73,8 @@ static void snd_imx_dma_err_callback(int channel, void *data, int err) { struct snd_pcm_substream *substream = data; struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct imx_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data; + struct imx_pcm_dma_params *dma_params = + snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream); struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; int ret; @@ -102,7 +103,7 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream) struct imx_pcm_runtime_data *iprtd = runtime->private_data; int ret; - dma_params = snd_soc_get_dma_data(rtd->dai->cpu_dai, substream); + dma_params = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream); iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH); if (iprtd->dma < 0) { @@ -212,7 +213,7 @@ static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream) struct imx_pcm_runtime_data *iprtd = runtime->private_data; int err; - dma_params = snd_soc_get_dma_data(rtd->dai->cpu_dai, substream); + dma_params = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream); iprtd->substream = substream; iprtd->buf = (unsigned int *)substream->dma_buffer.area; -- 1.6.4 --2fHTh5uZTiUOsy+g--

1 0

[alsa-devel] [PATCH] ad193x: add set_sysclk entry to support different clock input
by Barry Song 21 May '10

21 May '10

Signed-off-by: Barry Song <21cnbao(a)gmail.com> --- sound/soc/codecs/ad193x.c | 41 ++++++++++++++++++++++++++++++++++++++++- sound/soc/codecs/ad193x.h | 5 +++++ 2 files changed, 45 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c index c8ca114..1def75e 100644 --- a/sound/soc/codecs/ad193x.c +++ b/sound/soc/codecs/ad193x.c @@ -24,6 +24,7 @@ /* codec private data */ struct ad193x_priv { + unsigned int sysclk; struct snd_soc_codec codec; u8 reg_cache[AD193X_NUM_REGS]; }; @@ -251,15 +252,32 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai, return 0; } +static int ad193x_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec); + switch (freq) { + case 12288000: + case 18432000: + case 24576000: + case 36864000: + ad193x->sysclk = freq; + return 0; + } + return -EINVAL; +} + static int ad193x_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { - int word_len = 0, reg = 0; + int word_len = 0, reg = 0, master_rate = 0; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_device *socdev = rtd->socdev; struct snd_soc_codec *codec = socdev->card->codec; + struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec); /* bit size */ switch (params_format(params)) { @@ -275,6 +293,25 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream, break; } + switch (ad193x->sysclk) { + case 12288000: + master_rate = AD193X_PLL_INPUT_256; + break; + case 18432000: + master_rate = AD193X_PLL_INPUT_384; + break; + case 24576000: + master_rate = AD193X_PLL_INPUT_512; + break; + case 36864000: + master_rate = AD193X_PLL_INPUT_768; + break; + } + + reg = snd_soc_read(codec, AD193X_PLL_CLK_CTRL0); + reg = (reg & AD193X_PLL_INPUT_MASK) | master_rate; + snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg); + reg = snd_soc_read(codec, AD193X_DAC_CTRL2); reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) | word_len; snd_soc_write(codec, AD193X_DAC_CTRL2, reg); @@ -348,6 +385,7 @@ static int ad193x_bus_probe(struct device *dev, void *ctrl_data, int bus_type) /* pll input: mclki/xi */ snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, 0x99); /* mclk=24.576Mhz: 0x9D; mclk=12.288Mhz: 0x99 */ snd_soc_write(codec, AD193X_PLL_CLK_CTRL1, 0x04); + ad193x->sysclk = 12288000; ret = snd_soc_register_codec(codec); if (ret != 0) { @@ -383,6 +421,7 @@ static struct snd_soc_dai_ops ad193x_dai_ops = { .hw_params = ad193x_hw_params, .digital_mute = ad193x_mute, .set_tdm_slot = ad193x_set_tdm_slot, + .set_sysclk = ad193x_set_dai_sysclk, .set_fmt = ad193x_set_dai_fmt, }; diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h index a03c880..654ba64 100644 --- a/sound/soc/codecs/ad193x.h +++ b/sound/soc/codecs/ad193x.h @@ -11,6 +11,11 @@ #define AD193X_PLL_CLK_CTRL0 0x800 #define AD193X_PLL_POWERDOWN 0x01 +#define AD193X_PLL_INPUT_MASK (~0x6) +#define AD193X_PLL_INPUT_256 (0 << 1) +#define AD193X_PLL_INPUT_384 (1 << 1) +#define AD193X_PLL_INPUT_512 (2 << 1) +#define AD193X_PLL_INPUT_768 (3 << 1) #define AD193X_PLL_CLK_CTRL1 0x801 #define AD193X_DAC_CTRL0 0x802 #define AD193X_DAC_POWERDOWN 0x01 -- 1.5.6.3

3 2

[alsa-devel] [PATCH 0/2] Correct widget and PLL handling
by Jorge Eduardo Candelaria 21 May '10

21 May '10

Fix an issue when using 19.2 Mhz as clock input for TWL6040. Also, Drivers in TWL6040 can be modeled after PGA components of DAPM. This allows for better power management and also ensures that the DACs are enabled before the Drivers, reducing this way a pop-noise heard when powering up components.

3 5

[alsa-devel] [ice1712] Word Clock with Delta1010 E
by Bernhard Walle 21 May '10

21 May '10

Hi, we have a problem with the word clock input of the Delta 1010 E. At first: I modified the source code of envy24control to accept the Delta 1010 E as subdevice so that it allows to set the word clock. I'll post the patch after it works with the driver. However, the problem also exists when I use plain alsamixer or amixer. With the unmodified driver, I'm able to turn word clock on but whenever I record something, the arecord program (or Audacity) doesn't get any samples. With OSS (which we're using now but we're trying to switch to ALSA) my colleague Markus Prosch made a patch with lots of try & error that made the word clock working: http://opensound.hg.sourceforge.net/hgweb/opensound/opensound/rev/6a4bad6e7… When I try to "port" that patch to ALSA, the behaviour changes: The recording works, but the sample rate is too low so that it sounds quite strange. In any case: In the same hardware setup, it works flawlessly with OSS. Also, we had no problem with the older Delta 1010. It seems to be an incompatible change (or bug ;)) in revision E. Are there any devs here that know the hardware better and could help me in debugging that issue? Without any deeper sound driver knowledge and without any data sheet, that's quite hard for me. Thanks for your help! Regards, Bernhard PS: Please keep me in Cc since I'm not on the list.

2 2