May 2010 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ALSA: hda: Fix model quirk for Dell M1730
by Daniel Chen 25 May '10

25 May '10

Hi, Attached please find a patch for sound-2.6 master HEAD that fixes capture out-of-the-box for Dell M1730. This patch is applicable to all 2.6.32, 2.6.33, and 2.6.34 stable trees. Best, -Dan

2 1

[alsa-devel] [PATCH] ALSA: hda: Use LPIB for Toshiba A100-259
by Daniel Chen 25 May '10

25 May '10

Hi, Attached please find a patch for sound-2.6 based on my previous patch (ALSA: hda: Use LPIB for Acer Aspire 5110) specifying the LPIB quirk for an additional SSID to make capture work correctly in an installed distribution. This patch is applicable to 2.6.32, 2.6.33, and 2.6.34 stable trees (some with fuzz). Best, -Dan

3 2

[alsa-devel] [PATCH] ALSA: hda: Use LPIB for Acer Aspire 5110
by Daniel Chen 25 May '10

25 May '10

Hi, Attached please find a patch against sound-2.6 master HEAD specifying the LPIB quirk for an additional SSID to make capture work correctly in an installed distribution. This patch is applicable to 2.6.32, 2.6.33, and 2.6.34 stable trees (some with fuzz). Best, -Dan

2 1

[alsa-devel] [PATCH] aw2-alsa.c: use pci_ids.h defines and fix checkpatch.pl noise
by H Hartley Sweeten 25 May '10

25 May '10

Use the VENDOR/DEVICE ids provided in pci_ids.h instead of creating local ids of the same values. Also, fix the following checkpatch.pl warnings: WARNING: Use #include <linux/io.h> instead of <asm/io.h> WARNING: unnecessary whitespace before a quoted newline Signed-off-by: H Hartley Sweeten <hsweeten(a)visionengravers.com> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.de> --- diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c index 67921f9..c150022 100644 --- a/sound/pci/aw2/aw2-alsa.c +++ b/sound/pci/aw2/aw2-alsa.c @@ -26,7 +26,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> #include <sound/core.h> #include <sound/initval.h> #include <sound/pcm.h> @@ -44,9 +44,6 @@ MODULE_LICENSE("GPL"); /********************************* * DEFINES ********************************/ -#define PCI_VENDOR_ID_SAA7146 0x1131 -#define PCI_DEVICE_ID_SAA7146 0x7146 - #define CTL_ROUTE_ANALOG 0 #define CTL_ROUTE_DIGITAL 1 @@ -165,7 +162,7 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard."); static DEFINE_PCI_DEVICE_TABLE(snd_aw2_ids) = { - {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0, + {PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146, 0, 0, 0, 0, 0}, {0} }; @@ -419,7 +416,7 @@ static int snd_aw2_pcm_playback_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - snd_printdd(KERN_DEBUG "aw2: Playback_open \n"); + snd_printdd(KERN_DEBUG "aw2: Playback_open\n"); runtime->hw = snd_aw2_playback_hw; return 0; } @@ -435,7 +432,7 @@ static int snd_aw2_pcm_capture_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - snd_printdd(KERN_DEBUG "aw2: Capture_open \n"); + snd_printdd(KERN_DEBUG "aw2: Capture_open\n"); runtime->hw = snd_aw2_capture_hw; return 0; }

2 1

Re: [alsa-devel] snd_intel_hda : broken microphone
by mutenmaster＠tiscali.it 25 May '10

25 May '10

ok you can find attached my codec0 output data. I hope this helps. if you or anyone else need any other piece of info, please ask. ---- Messaggio originale---- Apparently (I assume) this is not for all via sound chips so it's best to expalin what your setup is. The output from lspci does not tell the story on the codec at times. The best output is from /proc/asound/card0/codec#0 On Wed, 2010-05-19 at 11:33 +0200, mutenmaster(a)tiscali.it wrote: > hello people, > > i am really determined in letting you know, for the > third time, > that my front mic input does not work. i do not know if the > rear > one works, i suspect not, but it's not important, because > before > the following commit, the front mic input worked: > > $ sudo git bisect > bad > f5271101faf1655d862849f42518c2a88ef394fb > is the first bad commit > > commit f5271101faf1655d862849f42518c2a88ef394fb > > Author: Lydia Wang > <lydiawang(a)viatech.com.cn> > Date: Sat Oct 10 19:07: > 35 2009 +0800 > > > ALSA HDA VIA: Add VIA_CTL_WIDGET_ANALOG_MUTE > control type > > Enter > low power state if AA-Path volume is muted. > > > Signed-off-by: > Lydia Wang <lydiawang@viatech. com.cn> > > Signed-off-by: Logan Li > <loganli(a)viatech.com.cn> > Signed-off-by: > Takashi Iwai <tiwai@suse. > de> > > :040000 040000 > ab1ae14ff67f0b08848faeb3ad68def7f3e727f0 > > 0bfbfde11fe32e87e8edbdb3c4d03c2d30370393 M sound > > i'm copypasting > the lspci ouput, so that you can have a general idea > of what kind of > machine i have. please let me know if there is > any other info you need > to solve this bug. > > more details on the problem: > doing > $ arecord -f cd > test.wav > > produces a file of 44 bytes. it's as if no microphone is > attached > to the jack. this behaviour has been evolving from the commit > > i showed you forth. at the beginning, a file with actual data was > > produced, but no audio came out of the speakers when reproducing > it. > going on with the commits, the file became 44 bytes long. > > yours, > > vasilis > > -- > > $ lspci -vvv > > 00:00.0 Host bridge: Advanced Micro Devices > [AMD] RS780 Host Bridge Alternate > Subsystem: ASUSTeK Computer Inc. > Device 83a2 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ > 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ > >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [c4] HyperTransport: > Slave or Primary Interface > Command: BaseUnitID=0 UnitCnt=12 MastHost- > DefDir- DUL- > Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- > <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b- > Link Config 0: MLWI=16bit > DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- > > Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 > IsocEn- LSEn- ExtCTL- 64b- > Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit > DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- > Revision ID: 3.00 > > Link Frequency 0: [b] > Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- > Link > Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ > 1.0GHz+ 1.2GHz- 1.4GHz- 1.6 GHz- Vend- > Feature Capability: IsocFC- > LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- > Link Frequency 1: 200MHz > Link > Error 1: <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability 1: > 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- > 1.6 GHz- Vend- > Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- > CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- > > Prefetchable memory behind bridge Upper: 00-00 > Bus Number: 00 > > Capabilities: [54] HyperTransport: UnitID Clumping > Capabilities: [40] > HyperTransport: Retry Mode > Capabilities: [9c] HyperTransport: #1a > > Capabilities: [f8] HyperTransport: #1c > > 00:02.0 PCI bridge: Advanced > Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if > 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ > 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- > >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: > primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind > bridge: 0000d000- 0000dfff > Memory behind bridge: fea00000-feafffff > > Prefetchable memory behind bridge: 00000000d0000000- 00000000dfffffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- > >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- > D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+, D3cold+) > Status: D0 PME- > Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port > (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency > L0s <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: > Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- > PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 > bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, > Latency L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5 GT/s, > Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- > SltCap: > AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # 2, > PowerLimit 75.000000; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- > PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd > Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- > PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ > LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- > PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID > 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Not > Supported, TimeoutDis- ARIFwd- > DevCtl2: Completion Timeout: 50us to > 50ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, > EnterCompliance- SpeedDis-, Selectable De- emphasis: -3.5dB > Transmit > Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > Compliance De- emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -3.5dB > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- > Count=1/1 Enable+ > Address: fee0f00c Data: 4159 > Capabilities: [b0] > Subsystem: ASUSTeK Computer Inc. Device 83a2 > Capabilities: [b8] > HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100] Vendor > Specific Information <?> > Capabilities: [110] Virtual Channel <?> > > Kernel driver in use: pcieport-driver > > 00:0a.0 PCI bridge: Advanced > Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ > 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- > >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: > primary=00, secondary=02, subordinate=02, sec- latency=0 > I/O behind > bridge: 0000e000-0000efff > Memory behind bridge: feb00000-febfffff > > Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- > >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1- > D2- AuxCurrent=0mA PME(D0+,D1- ,D2-,D3hot+,D3cold+) > Status: D0 PME- > Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Root Port > (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency > L0s <64ns, L1 <1us > ExtTag+ RBE+ FLReset- > DevCtl: Report errors: > Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- > PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 > bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- > TransPend- > LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, > Latency L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep+ BwNot+ > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, > Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- > SltCap: > AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- > Slot # a, > PowerLimit 25.000000; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- > PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd > Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- > PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ > LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- > PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID > 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Not > Supported, TimeoutDis- ARIFwd- > DevCtl2: Completion Timeout: 50us to > 50ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit > Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > Compliance De- emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -6dB > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- > Count=1/1 Enable+ > Address: fee0f00c Data: 4161 > Capabilities: [b0] > Subsystem: ASUSTeK Computer Inc. Device 83a2 > Capabilities: [b8] > HyperTransport: MSI Mapping Enable+ Fixed+ > Capabilities: [100] Vendor > Specific Information <?> > Capabilities: [110] Virtual Channel <?> > > Kernel driver in use: pcieport-driver > > 00:11.0 SATA controller: ATI > Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01 > [AHCI 1.0]) > Subsystem: ASUSTeK Computer Inc. Device 8389 > Control: > I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- > SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: > 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 22 > > Region 0: I/O ports at c000 [size=8] > Region 1: I/O ports at b000 > [size=4] > Region 2: I/O ports at a000 [size=8] > Region 3: I/O ports at > 9000 [size=4] > Region 4: I/O ports at 8000 [size=16] > Region 5: Memory > at fe9ffc00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [60] > Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME- Enable- DSel=0 > DScale=0 PME- > Capabilities: [70] SATA HBA <?> > Kernel driver in use: > ahci > > 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB > OHCI0 Controller (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. > Device 8389 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- > 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- > >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: > pin A routed to IRQ 16 > Region 0: Memory at fe9fe000 (32-bit, non- > prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > Kernel > modules: ohci- hcd > > 00:12.1 USB Controller: ATI Technologies Inc SB700 > USB OHCI1 Controller (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer > Inc. Device 8389 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- > 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- > >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: > pin A routed to IRQ 16 > Region 0: Memory at fe9fd000 (32-bit, non- > prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > Kernel > modules: ohci-hcd > > 00:12.2 USB Controller: ATI Technologies Inc > SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI]) > Subsystem: ASUSTeK > Computer Inc. Device 8389 > Control: I/O- Mem+ BusMaster+ SpecCycle- > MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: > Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at fe9ff800 (32- > bit, non-prefetchable) [size=256] > Capabilities: [c0] Power Management > version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+, > D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Bridge: > PM- B3+ > Capabilities: [e4] Debug port: BAR=1 offset=00e0 > Kernel > driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:13.0 USB > Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog- > if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device 8389 > Control: > I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- > SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: > 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > > Region 0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K] > > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > > 00:13.1 USB > Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 > [OHCI]) > Subsystem: ASUSTeK Computer Inc. Device 8389 > Control: I/O+ > Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ > FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: > 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > > Region 0: Memory at fe9fb000 (32-bit, non- prefetchable) [size=4K] > > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > > 00:13.2 USB > Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog- > if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Device 8389 > Control: > I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- > SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: > 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 19 > > Region 0: Memory at fe9ff400 (32-bit, non-prefetchable) [size=256] > > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ > D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME- > Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > Capabilities: [e4] > Debug port: BAR=1 offset=00e0 > Kernel driver in use: ehci_hcd > Kernel > modules: ehci-hcd > > 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus > Controller (rev 3c) > Subsystem: ASUSTeK Computer Inc. Device 8389 > > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B- > ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx- > > Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+ > > 00:14.1 > IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if > 8a [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. Device 8389 > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- > ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 64 > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at > 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O > ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: > I/O ports at ff00 [size=16] > Capabilities: [70] Message Signalled > Interrupts: Mask- 64bit- Count=1/1 Enable- > Address: 00000000 Data: > 0000 > Kernel driver in use: pata_atiixp > > 00:14.2 Audio device: ATI > Technologies Inc SBx00 Azalia (Intel HDA) > Subsystem: ASUSTeK Computer > Inc. Device 836c > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ > 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- > >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: > pin ? routed to IRQ 16 > Region 0: Memory at fe9f4000 (64-bit, non- > prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-, D3hot+, > D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver > in use: HDA Intel > Kernel modules: snd-hda-intel > > 00:14.3 ISA bridge: > ATI Technologies Inc SB700/SB800 LPC host controller > Subsystem: > ASUSTeK Computer Inc. Device 8389 > Control: I/O+ Mem+ BusMaster+ > SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:14.4 PCI bridge: > ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive > decode]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- > FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > INTx- > Latency: 64 > Bus: primary=00, secondary=03, subordinate=03, sec- > latency=64 > I/O behind bridge: 0000f000- 00000fff > Memory behind bridge: > fff00000-000fffff > Prefetchable memory behind bridge: fff00000-000fffff > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- > MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- > DiscTmrSERREn- > > 00:14.5 USB Controller: ATI Technologies Inc > SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI]) > Subsystem: > ASUSTeK Computer Inc. Device 8389 > Control: I/O- Mem+ BusMaster+ > SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 > bytes > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at fe9fa000 > (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > > Kernel modules: ohci-hcd > > 00:18.0 Host bridge: Advanced Micro Devices > [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport > Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ > 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- > >SERR- <PERR- INTx- > Capabilities: [80] HyperTransport: Host or > Secondary Interface > Command: WarmRst+ DblEnd- DevNum=0 ChainSide- > HostHide+ Slave- <EOCErr- DUL- > Link Control: CFlE- CST- CFE- <LkFail- > Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b- > Link Config: > MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit > DwFcOutEn- > Revision ID: 3.00 > Link Frequency: [b] > Link Error: > <Prot- <Ovfl- <EOC- CTLTm- > Link Frequency Capability: 200MHz+ 300MHz- > 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4 GHz- 1.6GHz- Vend- > > Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- > UCnfE- > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h > [Opteron, Athlon64, Sempron] Address Map > Control: I/O- Mem- BusMaster- > SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00: 18.2 Host bridge: Advanced > Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM > Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- > FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > INTx- > Kernel modules: amd64_edac_mod > > 00:18.3 Host bridge: Advanced > Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] > Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- > MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: > Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: [f0] Secure device <?> > > 00: > 18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, > Athlon64, Sempron] Link Control > Control: I/O- Mem- BusMaster- > SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 01:00.0 VGA compatible > controller: ATI Technologies Inc Device 954f (prog-if 00 [VGA > controller]) > Subsystem: ASUSTeK Computer Inc. Device 02a8 > Control: > I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- > SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- > DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, > Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: > Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 2: Memory > at feaf0000 (64-bit, non-prefetchable) [size=64K] > Region 4: I/O ports > at d000 [size=256] > Expansion ROM at feac0000 [disabled] [size=128K] > > Capabilities: [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ > D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME- > Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Legacy > Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency > L0s <4us, L1 unlimited > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ > FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us > > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 > bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- > BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- > SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not > Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to 50ms, > TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal > Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 > Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [100] > Vendor Specific Information <?> > > 01:00.1 Audio device: ATI Technologies > Inc Device aa38 > Subsystem: ASUSTeK Computer Inc. Device aa38 > Control: > I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- > SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- > DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, > Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 28 > Region 0: > Memory at feaec000 (64-bit, non- prefetchable) [size=16K] > Capabilities: > [50] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA PME(D0-,D1- , D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [58] Express (v2) Legacy Endpoint, > MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, > L1 unlimited > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, > MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > AuxPwr- TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM > L0s L1, Latency L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep- BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, > Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: > Completion Timeout: Not Supported, TimeoutDis- > DevCtl2: Completion > Timeout: 50us to 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5 > GT/s, EnterCompliance- SpeedDis-, Selectable De- emphasis: -6dB > > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- > ComplianceSOS- > Compliance De- emphasis: -6dB > LnkSta2: Current De- > emphasis Level: -6dB > Capabilities: [a0] Message Signalled Interrupts: > Mask- 64bit+ Count=1/1 Enable+ > Address: 00000000fee0f00c Data: 4189 > > Capabilities: [100] Vendor Specific Information <?> > Kernel driver in > use: HDA Intel > Kernel modules: snd-hda-intel > > 02:00.0 Ethernet > controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express > Gigabit Ethernet controller (rev 03) > Subsystem: ASUSTeK Computer Inc. > Device 83a3 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ > 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- > >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: > pin A routed to IRQ 27 > Region 0: I/O ports at e800 [size=256] > Region > 2: Memory at fdfff000 (64- bit, prefetchable) [size=4K] > Region 4: > Memory at fdff8000 (64- bit, prefetchable) [size=16K] > Expansion ROM at > febf0000 [disabled] [size=64K] > Capabilities: [40] Power Management > version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+, D1+, > D2+,D3hot+,D3cold+) > Status: D0 PME- Enable- DSel=0 DScale=0 PME- > > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 > Enable+ > Address: 00000000fee0f00c Data: 4179 > Capabilities: [70] > Express (v2) Endpoint, MSI 01 > DevCap: MaxPayload 256 bytes, PhantFunc > 0, Latency L0s <512ns, L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- > RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ > UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, > Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us > > ClockPM+ Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 > bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- > BWInt- AutBWInt- > LnkSta: Speed 2.5 GT/s, Width x1, TrErr- Train- > SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not > Supported, TimeoutDis+ > DevCtl2: Completion Timeout: 50us to 50ms, > TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- > SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: Normal > Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De- emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > > Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4 > Vector table: BAR=4 > offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [cc] Vital > Product Data <?> > Capabilities: [100] Advanced Error Reporting > UESta: > DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- > UnsupReq- ACSVoil- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- > UESvrt: DLP+ SDES+ > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSVoil- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- > NonFatalErr+ > AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ > ChkEn- > Capabilities: [140] Virtual Channel <?> > Capabilities: [160] > Device Serial Number 00- 00-00-00-00-00-00-00 > Kernel driver in use: > r8169 > > > > > Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli 14,95 € al mese. > > Gratis la Sim Tiscali Mobile con 25 euro di traffico! > > L'offerta è valida solo se attivi entro il 20/05/10 > > http: //abbonati.tiscali. it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT. mc_id=01fw > _______________________________________________ Alsa- devel mailing list Alsa-devel(a)alsa-project.org http://mailman.alsa- project. org/mailman/listinfo/alsa-devel Trova Casa sul portale immobiliare n°1 in Italia http://tiscali.casa.it Trova Casa sul portale immobiliare n°1 in Italia http://tiscali.casa.it

1 0

[alsa-devel] Type safe Haskell interface to ALSA sequencer
by Henning Thielemann 25 May '10

25 May '10

Dear ALSA developers, I read the ALSA-Sequencer-API-Doxygen documentation, various ALSA-MIDI-How-Tos and their examples and succeeded to work with ALSA sequencers in Haskell. However, I'm still uncertain about the meaning of the system components and how they interact. It is extensively documented, what works, but not, what does not work. Whenever I do a mistake, ALSA leaves me with an unspecific "operation not permitted" or "invalid argument" error code. Thus I try to encode conditions in Haskell types. For instance once I got an "Invalid argument" error code and only after some investigation, I found that I opened the sequencer in Output mode but later called event_input. (Actually I only wanted to output something, but used event_input for synchronization using Echo events. Unfortunately the intention of Echo messages is even not explained in the Doxygen stuff.) In order to prevent another occurrence of this problem, I defined distinct Haskell types for sequencers depending on the input mode. Now, event_input is only allowed on sequencers that were opened in Output or Duplex mode. However I wondered, why I could create writeable ports in a output-only sequencer. Does this make sense? Would it be reasonable to forbid writeable ports in output sequencers and readable ports in input sequencers by Haskell types? Is there a difference between cap_read|cap_write and cap_duplex? I also wondered why there can be several ports in one sequencer, since multiple clients can connect to one port, and event_input and event_output have no port argument. Further I wondered why queues are not bound to a specific port. Can queues be shared amongst ports? Is it sensible to have multiple queues in one sequencer? Why has sync_output_queue no queue argument? The more I think about it, it seems to me that a port is more an identifier, a part of an address, than a mailbox. I could use ports as tags, that tell which part of an application to control. A queue looks like a mail company and I can use the same sender and receiver addresses across different companies. If this is true, then I think it would be worth to mention this in the API documentation. In another example I called sync_output_queue in order to wait for all events being sent, but it aborted with "Operation not permitted", whereas I have seen example code where it works. What are the preconditions to calling sync_output_queue? I really like to see a picture of how sequencers, clients, ports, port_infos, queues, timers, events are related.

2 1

[alsa-devel] [PATCH 1/1] ALSA: usb-audio: add support for Akai MPD16
by Krzysztof Foltman 25 May '10

25 May '10

The decoding/encoding is based on own reverse-engineering. Both control and data ports are handled. Writing to control port supports SysEx events only, as this is the only type of messages that MPD16 recognizes. Signed-off-by: Krzysztof Foltman <wdev(a)foltman.com> diff --git a/sound/usb/midi.c b/sound/usb/midi.c index 2c1558c..d669feb 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -434,7 +434,7 @@ static void snd_usbmidi_maudio_broken_running_status_input( u8 cin = buffer[i] & 0x0f; struct usbmidi_in_port *port = &ep->ports[cable]; int length; - + length = snd_usbmidi_cin_length[cin]; if (cin == 0xf && buffer[i + 1] >= 0xf8) ; /* realtime msg: no running status change */ @@ -628,13 +628,13 @@ static struct usb_protocol_ops snd_usbmidi_standard_ops = { static struct usb_protocol_ops snd_usbmidi_midiman_ops = { .input = snd_usbmidi_midiman_input, - .output = snd_usbmidi_standard_output, + .output = snd_usbmidi_standard_output, .output_packet = snd_usbmidi_output_midiman_packet, }; static struct usb_protocol_ops snd_usbmidi_maudio_broken_running_status_ops = { .input = snd_usbmidi_maudio_broken_running_status_input, - .output = snd_usbmidi_standard_output, + .output = snd_usbmidi_standard_output, .output_packet = snd_usbmidi_output_standard_packet, }; @@ -645,6 +645,110 @@ static struct usb_protocol_ops snd_usbmidi_cme_ops = { }; /* + * AKAI MPD16 protocol: + * + * For control port (endpoint 1): + * ============================== + * One or more chunks consisting of first byte of (0x10 | msg_len) and then a + * SysEx message (msg_len=9 bytes long): + * + * F0 47 62 60 aa bb cc xx F7 (xx = (aa + bb + cc) & 0x7F) + * + * aa bb cc + * -------- + * 10 01 7E edit mode on? + * 10 01 00 edit mode off? + * 10 04 7F select bank 1 + * 10 04 00 select bank 0 + * 11 pp nn set pad pp to send note nn + * 12 pp ss set sensitivity on pad pp to ss + * 13 00 cc set slider CC number to cc + * 14 00 cc set MIDI channel to cc + * 15 01 pp request note number for pad pp (returns 20 pp nn) + * 15 02 pp request sensitivity for pad pp (returns 21 pp ss) + * 15 03 00 request slider CC number (returns 22 00 cc) + * 15 05 00 request MIDI channel number (returns 23 00 cc) + * + * For data port (endpoint 2): + * =========================== + * One or more chunks consisting of first byte of (0x20 | msg_len) and then a + * MIDI message (msg_len bytes long) + * + * Messages sent: + * 21 FE (active sense) + * 23 90 xx xx (note on) + * 23 Ax xx xx (polyphonic pressure) + * 23 Bx xx xx (control change) + */ +static void snd_usbmidi_akai_input(struct snd_usb_midi_in_endpoint *ep, + uint8_t *buffer, int buffer_length) +{ + unsigned int pos = 0; + unsigned int len = (unsigned int)buffer_length; + while (pos < len) { + int port = (buffer[pos] >> 4) - 1; + unsigned int msg_len = buffer[pos] & 0x0f; + pos++; + if (pos + msg_len <= len && (port == 0 || port == 1)) + snd_usbmidi_input_data(ep, 0, &buffer[pos], msg_len); + pos += msg_len; + } +} + +static void snd_usbmidi_akai_output(struct snd_usb_midi_out_endpoint *ep, + struct urb *urb) +{ + uint8_t *msg; + uint8_t *plen = &ep->ports[0].data[0]; /* length so far */ + int count; + uint8_t tmp; + + if (!ep->ports[0].active) + return; + + msg = urb->transfer_buffer + urb->transfer_buffer_length; + + /* only try adding more data when there's space for at least 1 SysEx */ + while (urb->transfer_buffer_length + 16 < ep->max_transfer) { + count = snd_rawmidi_transmit(ep->ports[0].substream, &tmp, 1); + if (count < 1) { + ep->ports[0].active = 0; + return; + } + if (ep->ports[0].state == STATE_UNKNOWN) { + /* only accept SysEx'es, skip everything else */ + if (tmp != 0xF0) + continue; + /* start accumulating SysEx data */ + *plen = 0x00; + ep->ports[0].state = STATE_SYSEX_0; + } + if (*plen > 14) { + /* SysEx too long, drop it and start over */ + ep->ports[0].state = STATE_UNKNOWN; + continue; + } + msg[++(*plen)] = tmp; + if (tmp == 0xF7) { + /* add total size (w/hdr) to length-to-transfer */ + urb->transfer_buffer_length += 1 + *plen; + /* set port number nibble in the header */ + msg[0] = 0x10 | *plen; + msg += 1 + *plen; + + /* go back to waiting for SysEx */ + ep->ports[0].state = STATE_UNKNOWN; + continue; + } + } +} + +static struct usb_protocol_ops snd_usbmidi_akai_ops = { + .input = snd_usbmidi_akai_input, + .output = snd_usbmidi_akai_output, +}; + +/* * Novation USB MIDI protocol: number of data bytes is in the first byte * (when receiving) (+1!) or in the second byte (when sending); data begins * at the third byte. @@ -1434,6 +1538,9 @@ static struct port_info { EXTERNAL_PORT(0x086a, 0x0001, 8, "%s Broadcast"), EXTERNAL_PORT(0x086a, 0x0002, 8, "%s Broadcast"), EXTERNAL_PORT(0x086a, 0x0003, 4, "%s Broadcast"), + /* Akai MPD16 */ + CONTROL_PORT(0x09e8, 0x0062, 0, "%s Control"), + EXTERNAL_PORT(0x09e8, 0x0062, 1, "%s MIDI"), /* Access Music Virus TI */ EXTERNAL_PORT(0x133e, 0x0815, 0, "%s MIDI"), PORT_INFO(0x133e, 0x0815, 1, "%s Synth", 0, @@ -1707,7 +1814,7 @@ static int snd_usbmidi_detect_endpoints(struct snd_usb_midi* umidi, snd_usbmidi_switch_roland_altsetting(umidi); if (endpoint[0].out_ep || endpoint[0].in_ep) - return 0; + return 0; intf = umidi->iface; if (!intf || intf->num_altsetting < 1) @@ -1745,7 +1852,7 @@ static int snd_usbmidi_detect_per_port_endpoints(struct snd_usb_midi* umidi, struct snd_usb_midi_endpoint_info* endpoints) { int err, i; - + err = snd_usbmidi_detect_endpoints(umidi, endpoints, MIDI_MAX_ENDPOINTS); for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) { if (endpoints[i].out_ep) @@ -2035,6 +2142,12 @@ int snd_usbmidi_create(struct snd_card *card, umidi->usb_protocol_ops = &snd_usbmidi_cme_ops; err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); break; + case QUIRK_MIDI_AKAI: + umidi->usb_protocol_ops = &snd_usbmidi_akai_ops; + err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); + /* endpoint 1 is input-only */ + endpoints[1].out_cables = 0; + break; default: snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type); err = -ENXIO; diff --git a/sound/usb/midi.h b/sound/usb/midi.h index 2089ec9..2fca80b 100644 --- a/sound/usb/midi.h +++ b/sound/usb/midi.h @@ -37,6 +37,8 @@ struct snd_usb_midi_endpoint_info { /* for QUIRK_MIDI_CME, data is NULL */ +/* for QUIRK_MIDI_AKAI, data is NULL */ + int snd_usbmidi_create(struct snd_card *card, struct usb_interface *iface, struct list_head *midi_list, diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 91ddef3..f8797f6 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -1973,6 +1973,17 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +/* AKAI devices */ +{ + USB_DEVICE(0x09e8, 0x0062), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "AKAI", + .product_name = "MPD16", + .ifnum = 0, + .type = QUIRK_MIDI_AKAI, + } +}, + /* TerraTec devices */ { USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012), diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 136e5b4..b45e54c 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -289,6 +289,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, [QUIRK_MIDI_FASTLANE] = create_any_midi_quirk, [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, [QUIRK_MIDI_CME] = create_any_midi_quirk, + [QUIRK_MIDI_AKAI] = create_any_midi_quirk, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index d679e72..06ebf24 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -74,6 +74,7 @@ enum quirk_type { QUIRK_MIDI_FASTLANE, QUIRK_MIDI_EMAGIC, QUIRK_MIDI_CME, + QUIRK_MIDI_AKAI, QUIRK_MIDI_US122L, QUIRK_AUDIO_STANDARD_INTERFACE, QUIRK_AUDIO_FIXED_ENDPOINT, -- 1.7.0.4

3 5

[alsa-devel] MMAP in ALSA
by Varadarajan, Srikanth 25 May '10

25 May '10

Hi All, I am new to the list and ALSA. For the hardware I am working with, we expose it to ALSA as one card capable of playing one PCM stream. If we have one application using the hardware through ALSA, other applications are unable to get access to it. So, we want to have PulseAudio on top and use the pulse virtual device to render audio through ALSA. Is this a recommended way of having multiple applications access one audio HW simultaneously? Is there any other way of handling multiple applications get access to the same hardware? Also, why are mmap and munmap operations required in ALSA? Right now, we do not have mmap and munmap operations exposed. Though the hardware constraints have "SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID" defined. Looks like, if we have to PulseAudio on top, mmap operations are required in ALSA. If there is a close enough ALSA implementation in the current Linux kernel that I can lookup, please point me to that. Any help/suggestions are welcome. Thanks, Srikanth

3 2

[alsa-devel] Query about code organization for kernel driver.
by Anksh Agarwal 25 May '10

25 May '10

Hi Everyone, I am currently working on a custom ARM based board and have succeeded in running alsa on my target. In this reference I have some basic queries and would be great if someone could give me pointers.This would help me in rorganizing the code as per acceptance from the group. since we planning to support a list of devices I wanted to keep the interface independent of playback/record session.this helps in switching to different devices in middle of playback. At any point a single device would be enabled. So i have another driver snd_device.c which uses sysfs interface to get device index or name to enable/disable device. The reason for this was that we could reuse a lot of code from the alsa-plugin(maemo). But then will it be right to put the device enable/disable code under sound/soc/xxxx/snd_device.c path, or can we split and place it seperately under sound/driver/xxxx/snd_device.c or any other suggested directory? i am not aware how to split the audio path enable/disable code from the soc driver and which would be ideal directory to place them, since there is hardly any interaction between playback and device enable/disable routines? I think the device enable/disable code outside sound/ directory wont be a good idea as its to be specifically used by alsa playback/record only. please suggest as this would help me a lot. Also let me know if any more info would help to get to a better conclusion. Really appreciate all the help. Thanks, Anksh

2 1

[alsa-devel] [PATCH] ASoC: fix uninitialised variable in siu_dai.c
by Guennadi Liakhovetski 24 May '10

24 May '10

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski(a)gmx.de> --- Strangely, the compiler doesn't warn about this one, but I really don't see how this can be correct. Am I being blind? sound/soc/sh/siu_dai.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c index d86ee1b..eeed5ed 100644 --- a/sound/soc/sh/siu_dai.c +++ b/sound/soc/sh/siu_dai.c @@ -588,6 +588,8 @@ static int siu_dai_prepare(struct snd_pcm_substream *substream, ret = siu_dai_spbstart(port_info); if (ret < 0) goto fail; + } else { + ret = 0; } port_info->play_cap |= self; -- 1.6.2.4

3 2