Alsa-devel
Threads by month
- ----- 2024 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2023 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2022 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2021 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2020 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2019 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2018 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2017 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2016 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2015 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2014 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2013 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2012 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2011 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2010 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2009 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2008 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2007 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
November 2010
- 133 participants
- 264 discussions
This is on linux kernel 2.6.36:
make -C /lib/modules/2.6.36-145/build SUBDIRS=/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver CPP="x86_64-pc-linux-gnu-gcc -E" CC="x86_64-pc-linux-gnu-gcc"
modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.36-145'
CC [M] /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/pdaudiocf.o
In file included from /var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/pdaudiocf.c:14:0:
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c: In function 'snd_pdacf_probe':
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:145:6: error: 'struct pcmcia_device' has no
member named 'config_flags'
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:146:6: error: 'struct pcmcia_device' has no
member named 'config_index'
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:147:6: error: 'struct pcmcia_device' has no
member named 'config_regs'
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c: In function 'pdacf_config':
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:219:6: error: 'struct pcmcia_device' has no
member named 'config_index'
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:220:6: error: 'struct pcmcia_device' has no
member named 'config_flags'
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:230:2: error: implicit declaration of function
'pcmcia_enable_device'
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c: At top level:
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:290:2: error: unknown field 'name' specified in
initializer
/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/../../alsa-kernel/pcmcia/pdaudiocf/pdaudiocf.c:290:2: warning: initialization from
incompatible pointer type
*** 7 errors, 1 warnings
make[4]: *** [/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf/pdaudiocf.o] Hata 1
make[3]: *** [/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia/pdaudiocf] Hata 2
make[2]: *** [/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver/pcmcia] Hata 2
make[1]: *** [_module_/var/pisi/module-alsa-driver-1.0.23_20101103-64/work/alsa-driver] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.36-145'
make: *** [compile] Error 2
---
Ozan Çağlayan
TUBITAK/UEKAE - Pardus Linux
http://www.pardus.org.tr/eng
2
1
[alsa-devel] [PATCH] ASoC: Convert soc-jack code to use request_any_context_irq()
by Mark Brown 03 Nov '10
by Mark Brown 03 Nov '10
03 Nov '10
Allow the standard soc-jack GPIO based jack handling to handle the use of
GPIOs which may sleep (such as those on GPIO expanders) by converting the
code to use request_any_context_irq().
Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com>
---
sound/soc/soc-jack.c | 11 ++++++-----
1 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 8a0a920..9f07551 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -263,11 +263,12 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
INIT_DELAYED_WORK(&gpios[i].work, gpio_work);
gpios[i].jack = jack;
- ret = request_irq(gpio_to_irq(gpios[i].gpio),
- gpio_handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- jack->codec->dev->driver->name,
- &gpios[i]);
+ ret = request_any_context_irq(gpio_to_irq(gpios[i].gpio),
+ gpio_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ jack->codec->dev->driver->name,
+ &gpios[i]);
if (ret)
goto err;
--
1.7.1
2
1
[alsa-devel] [PATCH] ASoC: Check return value of strict_strtoul() in WM8962
by Mark Brown 03 Nov '10
by Mark Brown 03 Nov '10
03 Nov '10
strict_strtoul() has been made __must_check so do so.
Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8962.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 894d0cd..e809274 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3500,8 +3500,11 @@ static ssize_t wm8962_beep_set(struct device *dev,
{
struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
long int time;
+ int ret;
- strict_strtol(buf, 10, &time);
+ ret = strict_strtol(buf, 10, &time);
+ if (ret != 0)
+ return ret;
input_event(wm8962->beep, EV_SND, SND_TONE, time);
--
1.7.1
1
0
Hi Takashi,
Some fixes for 2.6.37 before I pull in rc1.
The following changes since commit 911a0f0bfc01750590e8ac6e7f9f4921f470b0d1:
ASoC: tlv320dac33: Error handling for broken chip (2010-10-30 17:33:38 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6.git for-2.6.37
Jarkko Nikula (1):
ASoC: tpa6130a2: Fix unbalanced regulator disables
Peter Ujfalusi (2):
ASoC: tlv320dac33: Limit the US_TO_SAMPLES macro
ASoC: tlv320dac33: Mode1 FIFO auto configuration fix
sound/soc/codecs/tlv320dac33.c | 10 +++++++---
sound/soc/codecs/tpa6130a2.c | 4 ++--
2 files changed, 9 insertions(+), 5 deletions(-)
2
1
03 Nov '10
From: Victor Rodriguez <victor.rodriguez(a)sasken.com>
This patch adds
EMAC, EDMA, ASoC, SOUND, MMC/SD and USB OHCI
support for the Hawkboard-L138 system
It is under the machine name "omapl138_hawkboard".
This system is based on the da850 davinci CPU architecture.
Victor Rodriguez (9):
davinci: EMAC support for Omapl138-Hawkboard
davinci: EDMA support for Omapl138-Hawkboard
davinci: ASoC support for Omapl138-Hawkboard
davinci: McASP configuration for Omapl138-Hawkboard
davinci: Audio support for Omapl138-Hawkboard
davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard
davinci: MMC/SD support for Omapl138-Hawkboar
davinci: USB clocks for Omapl138-Hawkboard
davinci: USB1.1 support for Omapl138-Hawkboard
arch/arm/mach-davinci/board-omapl138-hawk.c | 313 +++++++++++++++++++++++++++
arch/arm/mach-davinci/da850.c | 22 ++-
arch/arm/mach-davinci/include/mach/mux.h | 4 +
sound/soc/davinci/Kconfig | 5 +-
sound/soc/davinci/davinci-evm.c | 6 +-
5 files changed, 345 insertions(+), 5 deletions(-)
4
13
02 Nov '10
Hi,
Currently to get sound over HDMI on AppleTV (1st generation) (with linux of course), NVIDIA 100.14.19 drivers are required (and they compile only on Ubuntu 8.04).
It doesn't work with newer drivers.
I made a few tests with Ubuntu 9.10 + kernel 2.6.32 + alsa-driver 1.0.23 + NVIDIA drivers 256.35
atv uses a SiI1390 chip for HDMI output (and NVidia GeForce Go 7300 / G72 pci-express chipset).
In current alsa-driver, SiI1390 uses the ATI HDMI codec which hasn't been updated in a while.
So I patched alsa-driver to use the INTEL HDMI codec instead.
After boot, and before starting X, I have sound (tested with aplay).
See alsa-info log here: http://pastebin.com/dsaqnDKb
As soon as I start X, no more sound. alsa-info log here: http://pastebin.com/fHqyJw6Q
Trying to mute - unmute with alsamixer (it puts the digital output back to enable) or reloading the driver doesn't help. Can't get any sound with X.
One thing I noticed is that the function hdmi_intrinsic_event is never called. I never get any "HDMI hot plug event". So monitor_present and eld_valid are never set. Not sure this is really relevant, but that's where I got stuck so far.
Is the HDMI output disabled because alsa doesn't give the right information?
Any advice?
What more could I test?
Thanks
Benjamin
1
0
The following changes since commit c8ddb2713c624f432fa5fe3c7ecffcdda46ea0d4:
Linux 2.6.37-rc1 (2010-11-01 07:54:12 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.38
The only big change here is the addition of the ALC CODECs and the HP
thin client machine drivers that depend on them.
Arnaud Patard (2):
ASoC: add support for alc562[123] codecs
ASoC: kirkwood: Add audio support to hp t5325 thin clients
Eric Miao (1):
ASoC: fix the building issue of missing codec field in 'struct snd_soc_card'
Jarkko Nikula (3):
ASoC: Fix SND_SOC_ALL_CODECS typo for jz4740
ASoC: Include cx20442 to SND_SOC_ALL_CODECS
ASoC: Fix SND_SOC_ALL_CODECS typo for alc5623
Joe Perches (1):
ASoC: Update WARN uses in wm_hubs
Mark Brown (6):
ASoC: Check return value of struct_strtoul() in pmdown_time_set()
ASoC: Store DC offset correction for wm_hubs devices in class W mode
ASoC: Remove volatility from WM8900 POWER1 register
Merge branch 'for-2.6.37' into for-2.6.38
Merge commit 'v2.6.37-rc1' into for-2.6.37
Merge branch 'for-2.6.37' into HEAD
include/sound/alc5623.h | 15 +
sound/soc/codecs/Kconfig | 8 +-
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/alc5623.c | 1118 +++++++++++++++++++++++++++++++++++
sound/soc/codecs/alc5623.h | 161 +++++
sound/soc/codecs/wm8900.c | 6 -
sound/soc/codecs/wm8993.c | 2 +
sound/soc/codecs/wm8994.c | 3 +
sound/soc/codecs/wm_hubs.c | 69 ++-
sound/soc/codecs/wm_hubs.h | 3 +
sound/soc/kirkwood/Kconfig | 9 +
sound/soc/kirkwood/Makefile | 2 +
sound/soc/kirkwood/kirkwood-t5325.c | 141 +++++
sound/soc/pxa/tosa.c | 2 +-
sound/soc/soc-core.c | 5 +-
15 files changed, 1514 insertions(+), 32 deletions(-)
create mode 100644 include/sound/alc5623.h
create mode 100644 sound/soc/codecs/alc5623.c
create mode 100644 sound/soc/codecs/alc5623.h
create mode 100644 sound/soc/kirkwood/kirkwood-t5325.c
2
1
The following changes since commit c8ddb2713c624f432fa5fe3c7ecffcdda46ea0d4:
Linux 2.6.37-rc1 (2010-11-01 07:54:12 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.37
Mark Brown (3):
Merge commit 'v2.6.37-rc1' into for-2.6.37
For obvious reasons I'll omit the diffstat :)
1
0
02 Nov '10
Hi,
In 2.6.36-rc* sound stopped working on my T60 (HDA Intel). Everything
appears normal except there's no sound.
Dmesg attached.
...
Hmm, it appears sound is back after a suspend/resume. Strange.
Thanks,
Miklos
[ 0.000000] Linux version 2.6.36-rc6-00084-gc6ea21e-dirty (mszeredi@tucsk) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #99 SMP PREEMPT Mon Oct 4 15:37:55 CEST 2010
[ 0.000000] Command line: root=/dev/sda5 vga=0x365
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f6810] f6810
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ 8000-d000
[ 0.000000] ACPI: RSDP 00000000000f67e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bfed13c7 0008C (v01 LENOVO TP-79 00002190 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfed1500 000F4 (v03 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100702/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20100702/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000bfed185e 0D3C2 (v01 LENOVO TP-79 00002190 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfef4000 00040
[ 0.000000] ACPI: SSDT 00000000bfed16b4 001AA (v01 LENOVO TP-79 00002190 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 00000000bfedec20 00052 (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: TCPA 00000000bfedec72 00032 (v02 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bfedeca4 00068 (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bfeded0c 0003C (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bfeded48 00038 (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bfedee62 00176 (v01 LENOVO TP-79 00002190 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedefd8 00028 (v01 LENOVO TP-79 00002190 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfef2655 0025F (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfef28b4 000A6 (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfef295a 004F7 (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfef2e51 001D8 (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] On node 0 totalpages: 786030
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3942 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10692 pages used for memmap
[ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [7000 - 77ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880002600000 s79424 r8192 d22976 u1048576
[ 0.000000] pcpu-alloc: s79424 r8192 d22976 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775282
[ 0.000000] Kernel command line: root=/dev/sda5 vga=0x365
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (49 early reservations)
[ 0.000000] #1 [0001000000 - 0002487c98] TEXT DATA BSS
[ 0.000000] #2 [0002488000 - 000248814c] BRK
[ 0.000000] #3 [00000f6820 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000f6810 - 00000f6820] MP-table mpf
[ 0.000000] #5 [000009f000 - 000009f5a1] BIOS reserved
[ 0.000000] #6 [000009f6bd - 00000f6810] BIOS reserved
[ 0.000000] #7 [000009f5a1 - 000009f6bd] MP-table mpc
[ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #10 [0000008000 - 000000b000] PGTABLE
[ 0.000000] #11 [0002488180 - 0002489180] BOOTMEM
[ 0.000000] #12 [0002487cc0 - 0002487f00] BOOTMEM
[ 0.000000] #13 [0002c8a000 - 000568a000] BOOTMEM
[ 0.000000] #14 [0002489180 - 0002489580] BOOTMEM
[ 0.000000] #15 [0002489580 - 00024c9580] BOOTMEM
[ 0.000000] #16 [00024ca000 - 00024cb000] BOOTMEM
[ 0.000000] #17 [0002487f00 - 0002487f41] BOOTMEM
[ 0.000000] #18 [0002487f80 - 0002487fc3] BOOTMEM
[ 0.000000] #19 [00024c9580 - 00024c9900] BOOTMEM
[ 0.000000] #20 [00024c9900 - 00024c9968] BOOTMEM
[ 0.000000] #21 [00024c9980 - 00024c99e8] BOOTMEM
[ 0.000000] #22 [00024c9a00 - 00024c9a68] BOOTMEM
[ 0.000000] #23 [00024c9a80 - 00024c9ae8] BOOTMEM
[ 0.000000] #24 [00024c9b00 - 00024c9b68] BOOTMEM
[ 0.000000] #25 [00024c9b80 - 00024c9be8] BOOTMEM
[ 0.000000] #26 [00024c9c00 - 00024c9c68] BOOTMEM
[ 0.000000] #27 [00024c9c80 - 00024c9ce8] BOOTMEM
[ 0.000000] #28 [00024c9d00 - 00024c9d68] BOOTMEM
[ 0.000000] #29 [00024c9d80 - 00024c9de8] BOOTMEM
[ 0.000000] #30 [00024c9e00 - 00024c9e68] BOOTMEM
[ 0.000000] #31 [00024c9e80 - 00024c9ee8] BOOTMEM
[ 0.000000] #32 [00024c9f00 - 00024c9f68] BOOTMEM
[ 0.000000] #33 [00024c9f80 - 00024c9fe8] BOOTMEM
[ 0.000000] #34 [00024cb000 - 00024cb068] BOOTMEM
[ 0.000000] #35 [00024cb080 - 00024cb099] BOOTMEM
[ 0.000000] #36 [00024cb0c0 - 00024cb0d9] BOOTMEM
[ 0.000000] #37 [0002600000 - 000261b000] BOOTMEM
[ 0.000000] #38 [0002700000 - 000271b000] BOOTMEM
[ 0.000000] #39 [00024cd100 - 00024cd108] BOOTMEM
[ 0.000000] #40 [00024cd140 - 00024cd148] BOOTMEM
[ 0.000000] #41 [00024cd180 - 00024cd188] BOOTMEM
[ 0.000000] #42 [00024cd1c0 - 00024cd1d0] BOOTMEM
[ 0.000000] #43 [00024cd200 - 00024cd340] BOOTMEM
[ 0.000000] #44 [00024cd340 - 00024cd3a0] BOOTMEM
[ 0.000000] #45 [00024cd3c0 - 00024cd420] BOOTMEM
[ 0.000000] #46 [00024cd440 - 00024d5440] BOOTMEM
[ 0.000000] #47 [000271b000 - 0002b1b000] BOOTMEM
[ 0.000000] #48 [000568a000 - 000588a000] BOOTMEM
[ 0.000000] Memory: 3073384k/3144512k available (4414k kernel code, 392k absent, 70736k reserved, 6410k data, 416k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.655 MHz processor.
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.31 BogoMIPS (lpj=7314620)
[ 0.004030] pid_max: default: 32768 minimum: 301
[ 0.004207] Mount-cache hash table entries: 256
[ 0.008071] CPU: Physical Processor ID: 0
[ 0.008077] CPU: Processor Core ID: 0
[ 0.008084] mce: CPU supports 6 MCE banks
[ 0.008097] CPU0: Thermal monitoring enabled (TM2)
[ 0.008105] using mwait in idle threads.
[ 0.008111] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.008125] PEBS disabled due to CPU errata.
[ 0.008140] ... version: 2
[ 0.008146] ... bit width: 40
[ 0.008151] ... generic registers: 2
[ 0.008157] ... value mask: 000000ffffffffff
[ 0.008163] ... max period: 000000007fffffff
[ 0.008170] ... fixed-purpose events: 3
[ 0.008175] ... event mask: 0000000700000003
[ 0.008294] ACPI: Core revision 20100702
[ 0.040194] Setting APIC routing to flat
[ 0.040618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082618] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
[ 0.092044] lockdep: fixing up alternatives.
[ 0.096167] Booting Node 0, Processors #1 Ok.
[ 0.188000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.188000] Measured 566005 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.188000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.188067] Brought up 2 CPUs
[ 0.188075] Total of 2 processors activated (7314.85 BogoMIPS).
[ 0.188685] NET: Registered protocol family 16
[ 0.188685] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.188685] ACPI: bus type pci registered
[ 0.192021] PCI: Using configuration type 1 for base access
[ 0.204511] bio: create slab <bio-0> at 0
[ 0.215676] ACPI: EC: EC description table is found, configuring boot EC
[ 0.244526] ACPI: SSDT 00000000bfef1d36 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.246996] ACPI: Dynamic OEM Table Load:
[ 0.247005] ACPI: SSDT (null) 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.247441] ACPI: SSDT 00000000bfef1ffb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.249988] ACPI: Dynamic OEM Table Load:
[ 0.249997] ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.250553] ACPI: SSDT 00000000bfef1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.253061] ACPI: Dynamic OEM Table Load:
[ 0.253070] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.253291] ACPI: SSDT 00000000bfef1f76 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.255719] ACPI: Dynamic OEM Table Load:
[ 0.255727] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.255798] ACPI: Interpreter enabled
[ 0.255805] ACPI: (supports S0 S3 S5)
[ 0.255861] ACPI: Using IOAPIC for interrupt routing
[ 0.276490] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.276579] ACPI: Power Resource [PUBS] (on)
[ 0.280875] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.280886] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.281720] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.281966] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff] (ignored)
[ 0.281966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:01.0: PME# disabled
[ 0.281966] pci 0000:00:1b.0: reg 10: [mem 0xee400000-0xee403fff 64bit]
[ 0.281966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1b.0: PME# disabled
[ 0.281966] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.0: PME# disabled
[ 0.281966] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.1: PME# disabled
[ 0.281966] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.2: PME# disabled
[ 0.281966] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.3: PME# disabled
[ 0.281966] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
[ 0.281966] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
[ 0.281966] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
[ 0.281966] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f]
[ 0.281998] pci 0000:00:1d.7: reg 10: [mem 0xee404000-0xee4043ff]
[ 0.284116] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.284124] pci 0000:00:1d.7: PME# disabled
[ 0.284435] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.284449] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.284461] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.284473] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.284486] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.284576] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.284593] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.284611] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.284628] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.284646] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f]
[ 0.284764] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf]
[ 0.284782] pci 0000:00:1f.2: reg 14: [io 0x18ac-0x18af]
[ 0.284799] pci 0000:00:1f.2: reg 18: [io 0x18c0-0x18c7]
[ 0.284817] pci 0000:00:1f.2: reg 1c: [io 0x18a8-0x18ab]
[ 0.284834] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.284852] pci 0000:00:1f.2: reg 24: [mem 0xee404400-0xee4047ff]
[ 0.284914] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.284921] pci 0000:00:1f.2: PME# disabled
[ 0.285052] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.285287] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.285330] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.285372] pci 0000:01:00.0: reg 18: [mem 0xee100000-0xee10ffff]
[ 0.285537] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.285650] pci 0000:01:00.0: supports D1 D2
[ 0.285704] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.285717] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.285727] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.285733] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.285741] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.285966] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
[ 0.286017] pci 0000:02:00.0: reg 18: [io 0x3000-0x301f]
[ 0.286194] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.286204] pci 0000:02:00.0: PME# disabled
[ 0.286239] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.286251] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.286263] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.286270] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.286282] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.286535] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff]
[ 0.286918] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.286933] pci 0000:03:00.0: PME# disabled
[ 0.286990] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.287003] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.287014] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
[ 0.287021] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.287033] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.287123] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.287135] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
[ 0.287143] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.287154] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.287243] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.287255] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.287262] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.287274] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.287382] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
[ 0.287425] pci 0000:15:00.0: supports D1 D2
[ 0.287428] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.287437] pci 0000:15:00.0: PME# disabled
[ 0.287541] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.287554] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
[ 0.287562] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.287573] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.287578] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.287581] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[ 0.287711] pci_bus 0000:00: on NUMA node 0
[ 0.287717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.288235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.288329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.288424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.288514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.288621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.288727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.304239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.304457] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.304668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.304878] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305087] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305506] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305716] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305827] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.305827] vgaarb: loaded
[ 0.305827] SCSI subsystem initialized
[ 0.305827] libata version 3.00 loaded.
[ 0.305827] usbcore: registered new interface driver usbfs
[ 0.305827] usbcore: registered new interface driver hub
[ 0.305827] usbcore: registered new device driver usb
[ 0.305827] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.305827] PCI: Using ACPI for IRQ routing
[ 0.305827] PCI: pci_cache_line_size set to 64 bytes
[ 0.308219] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.308233] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.308310] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.308310] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.308310] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.320055] Switching to clocksource hpet
[ 0.328359] pnp: PnP ACPI init
[ 0.328420] ACPI: bus type pnp registered
[ 0.333541] pnp: PnP ACPI: found 12 devices
[ 0.333549] ACPI: ACPI bus type pnp unregistered
[ 0.333585] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.333596] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
[ 0.333606] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
[ 0.333615] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.333624] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.333635] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.333645] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.333655] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.333666] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.333676] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.333686] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.333696] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.333706] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.333717] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.333727] system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
[ 0.333750] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.333760] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.333768] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.333777] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.333786] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.333795] system 00:02: [io 0x1600-0x165f] could not be reserved
[ 0.333805] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.333814] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.333824] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.333833] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.333843] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.347759] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.347774] pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref]
[ 0.347784] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.347793] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.347805] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.347816] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.347830] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.347839] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.347853] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.347865] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.347883] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.347892] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
[ 0.347906] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.347918] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.347935] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.347944] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
[ 0.347958] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.347970] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.347987] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.348015] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.348029] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.348041] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.348060] pci 0000:15:00.0: BAR 9: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 0.348071] pci 0000:15:00.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.348080] pci 0000:15:00.0: BAR 7: assigned [io 0xa000-0xa0ff]
[ 0.348089] pci 0000:15:00.0: BAR 8: assigned [io 0xa400-0xa4ff]
[ 0.348097] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.348104] pci 0000:15:00.0: bridge window [io 0xa000-0xa0ff]
[ 0.348116] pci 0000:15:00.0: bridge window [io 0xa400-0xa4ff]
[ 0.348129] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
[ 0.348143] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.348156] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.348165] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
[ 0.348179] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.348191] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.348230] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.348242] pci 0000:00:01.0: setting latency timer to 64
[ 0.348261] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.348273] pci 0000:00:1c.0: setting latency timer to 64
[ 0.348291] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.348304] pci 0000:00:1c.1: setting latency timer to 64
[ 0.348322] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.348334] pci 0000:00:1c.2: setting latency timer to 64
[ 0.348354] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.348365] pci 0000:00:1c.3: setting latency timer to 64
[ 0.348375] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.348389] pci 0000:00:1e.0: setting latency timer to 64
[ 0.348409] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.348424] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.348427] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.348431] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.348434] pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff]
[ 0.348437] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.348441] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.348444] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
[ 0.348447] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.348450] pci_bus 0000:03: resource 0 [io 0x4000-0x5fff]
[ 0.348453] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
[ 0.348457] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.348460] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff]
[ 0.348463] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.348466] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.348470] pci_bus 0000:0c: resource 0 [io 0x8000-0x9fff]
[ 0.348473] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
[ 0.348476] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.348479] pci_bus 0000:15: resource 0 [io 0xa000-0xdfff]
[ 0.348482] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
[ 0.348486] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.348489] pci_bus 0000:15: resource 4 [io 0x0000-0xffff]
[ 0.348492] pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.348495] pci_bus 0000:16: resource 0 [io 0xa000-0xa0ff]
[ 0.348498] pci_bus 0000:16: resource 1 [io 0xa400-0xa4ff]
[ 0.348501] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
[ 0.348505] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.348654] NET: Registered protocol family 2
[ 0.348929] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.350072] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.353332] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.360158] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.360239] TCP reno registered
[ 0.360256] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.360679] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.361328] NET: Registered protocol family 1
[ 0.361415] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361418] pci 0000:00:1d.0: Performing full reset
[ 0.361444] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361447] pci 0000:00:1d.1: Performing full reset
[ 0.361471] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361473] pci 0000:00:1d.2: Performing full reset
[ 0.361499] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361501] pci 0000:00:1d.3: Performing full reset
[ 0.361599] pci 0000:01:00.0: Boot video device
[ 0.361731] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.362103] Simple Boot Flag at 0x35 set to 0x1
[ 0.364937] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.365847] msgmni has been set to 6002
[ 0.366403] io scheduler noop registered
[ 0.366443] io scheduler cfq registered (default)
[ 0.368272] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1d
[ 0.368292] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.368374] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.368575] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d
[ 0.368601] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.368679] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.369001] pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1d
[ 0.369026] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.369104] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.369420] pcieport 0000:00:1c.2: ACPI _OSC control granted for 0x1d
[ 0.369446] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.369523] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.369842] pcieport 0000:00:1c.3: ACPI _OSC control granted for 0x1d
[ 0.369868] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.369945] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.370530] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.370541] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.370552] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.370605] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.370614] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.370627] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.370682] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.370691] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.370704] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.370756] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.370769] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.370821] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.370835] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.372874] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc90000080000, using 5120k, total 16384k
[ 0.372886] vesafb: mode is 1280x1024x16, linelength=2560, pages=5
[ 0.372894] vesafb: scrolling: redraw
[ 0.372900] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.413823] Console: switching to colour frame buffer device 160x64
[ 0.454307] fb0: VESA VGA frame buffer device
[ 0.454607] intel_idle: MWAIT substates: 0x22220
[ 0.454610] intel_idle: does not run on family 6 model 15
[ 0.455057] input: Lid Switch as /class/input/input0
[ 0.455547] ACPI: Lid Switch [LID]
[ 0.455918] input: Sleep Button as /class/input/input1
[ 0.456231] ACPI: Sleep Button [SLPB]
[ 0.456634] input: Power Button as /class/input/input2
[ 0.456879] ACPI: Power Button [PWRF]
[ 0.461405] acpi device:05: registered as cooling_device0
[ 0.462190] input: Video Bus as /class/input/input3
[ 0.462426] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 0.525617] Real Time Clock Driver v1.12b
[ 0.526298] Non-volatile memory driver v1.3
[ 0.526497] Linux agpgart interface v0.103
[ 0.527387] [drm] Initialized drm 1.1.0 20060810
[ 0.527764] [drm] radeon defaulting to userspace modesetting.
[ 0.529949] pci 0000:01:00.0: power state changed by ACPI to D0
[ 0.530248] pci 0000:01:00.0: power state changed by ACPI to D0
[ 0.530542] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.530871] pci 0000:01:00.0: setting latency timer to 64
[ 0.531580] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 0.533992] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 0.534340] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.538756] loop: module loaded
[ 0.538913] Uniform Multi-Platform E-IDE driver
[ 0.539371] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 0.539689] pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 0.540028] piix 0000:00:1f.1: IDE port disabled
[ 0.540294] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.540618] ide0: BM-DMA at 0x1880-0x1887
[ 0.540829] Probing IDE interface ide0...
[ 1.276360] hda: MATSHITADVD-RAM UJ-842, ATAPI CD/DVD-ROM drive
[ 1.612208] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.612522] hda: UDMA/33 mode selected
[ 1.613035] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.616430] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.616881] ide-gd driver 1.18
[ 1.617134] ide-cd driver 5.00
[ 1.618479] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 1.618904] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.629496] ahci 0000:00:1f.2: version 3.0
[ 1.629519] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.629910] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.630026] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.630411] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.643039] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.643289] scsi0 : ahci
[ 1.656271] scsi1 : ahci
[ 1.668834] scsi2 : ahci
[ 1.681187] scsi3 : ahci
[ 1.693565] ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 45
[ 1.705958] ata2: DUMMY
[ 1.718134] ata3: DUMMY
[ 1.730318] ata4: DUMMY
[ 1.742932] tun: Universal TUN/TAP device driver, 1.6
[ 1.755402] tun: (C) 1999-2004 Max Krasnyansky <maxk(a)qualcomm.com>
[ 1.768621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.781398] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.781639] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.794562] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.807150] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.819748] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.819754] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.832707] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.845177] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 1.845183] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 1.845237] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.857613] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.870022] ehci_hcd 0000:00:1d.7: reset command 0080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
[ 1.873906] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.873908] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.873952] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
[ 1.886269] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.890165] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.900040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.912441] usb usb1: default language 0x0409
[ 1.912462] usb usb1: udev 1, busnum 1, minor = 0
[ 1.912466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.924646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.936838] usb usb1: Product: EHCI Host Controller
[ 1.949005] usb usb1: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty ehci_hcd
[ 1.961312] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.973878] usb usb1: usb_probe_device
[ 1.973882] usb usb1: configuration #1 chosen from 1 choice
[ 1.974023] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.974284] hub 1-0:1.0: usb_probe_interface
[ 1.974287] hub 1-0:1.0: usb_probe_interface - got id
[ 1.974295] hub 1-0:1.0: USB hub found
[ 1.986464] hub 1-0:1.0: 8 ports detected
[ 1.998516] hub 1-0:1.0: standalone hub
[ 1.998519] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.998521] hub 1-0:1.0: individual port over-current protection
[ 1.998525] hub 1-0:1.0: power on to power good time: 20ms
[ 1.998636] hub 1-0:1.0: local power source is good
[ 1.998640] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.999251] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.011721] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.024172] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.036276] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.048405] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.048411] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.060620] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.064041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.084887] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.096951] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.096956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.097065] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
[ 2.097073] hub 1-0:1.0: port 2: status 0501 change 0001
[ 2.097141] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.097148] hub 1-0:1.0: port 7: status 0501 change 0001
[ 2.097163] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.097169] hub 1-0:1.0: port 8: status 0501 change 0001
[ 2.097195] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.097197] uhci_hcd 0000:00:1d.0: Performing full reset
[ 2.097215] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 2.097252] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 2.097359] usb usb2: default language 0x0409
[ 2.097379] usb usb2: udev 1, busnum 2, minor = 128
[ 2.097381] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.097384] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.097387] usb usb2: Product: UHCI Host Controller
[ 2.097389] usb usb2: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.097391] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.184327] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.197132] usb usb2: usb_probe_device
[ 2.197137] usb usb2: configuration #1 chosen from 1 choice
[ 2.197155] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.197315] hub 2-0:1.0: usb_probe_interface
[ 2.197318] hub 2-0:1.0: usb_probe_interface - got id
[ 2.197325] hub 2-0:1.0: USB hub found
[ 2.209950] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133
[ 2.210013] hub 2-0:1.0: 2 ports detected
[ 2.210016] hub 2-0:1.0: standalone hub
[ 2.210018] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.210020] hub 2-0:1.0: individual port over-current protection
[ 2.210022] hub 2-0:1.0: power on to power good time: 2ms
[ 2.210052] hub 2-0:1.0: local power source is good
[ 2.210055] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.210333] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 2.210389] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.210407] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.210411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.210593] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.210604] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.210611] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.210613] uhci_hcd 0000:00:1d.1: Performing full reset
[ 2.210630] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 2.210663] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 2.210739] usb usb3: default language 0x0409
[ 2.210758] usb usb3: udev 1, busnum 3, minor = 256
[ 2.210761] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.210764] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.210766] usb usb3: Product: UHCI Host Controller
[ 2.210768] usb usb3: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.210771] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.210974] usb usb3: usb_probe_device
[ 2.210977] usb usb3: configuration #1 chosen from 1 choice
[ 2.210994] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.211132] hub 3-0:1.0: usb_probe_interface
[ 2.211135] hub 3-0:1.0: usb_probe_interface - got id
[ 2.211140] hub 3-0:1.0: USB hub found
[ 2.211158] hub 3-0:1.0: 2 ports detected
[ 2.211161] hub 3-0:1.0: standalone hub
[ 2.211163] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.211165] hub 3-0:1.0: individual port over-current protection
[ 2.211167] hub 3-0:1.0: power on to power good time: 2ms
[ 2.211183] hub 3-0:1.0: local power source is good
[ 2.211185] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.211453] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 2.211597] hub 1-0:1.0: state 7 ports 8 chg 0184 evt 0000
[ 2.211652] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 2.211753] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[ 2.211886] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.212079] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.212091] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.212102] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.212106] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.212284] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.212298] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.212305] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.212307] uhci_hcd 0000:00:1d.2: Performing full reset
[ 2.212325] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 2.212359] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.212434] usb usb4: default language 0x0409
[ 2.212454] usb usb4: udev 1, busnum 4, minor = 384
[ 2.212457] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212462] usb usb4: Product: UHCI Host Controller
[ 2.212464] usb usb4: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.212467] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.212680] usb usb4: usb_probe_device
[ 2.212684] usb usb4: configuration #1 chosen from 1 choice
[ 2.212701] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.212845] hub 4-0:1.0: usb_probe_interface
[ 2.212847] hub 4-0:1.0: usb_probe_interface - got id
[ 2.212852] hub 4-0:1.0: USB hub found
[ 2.212864] hub 4-0:1.0: 2 ports detected
[ 2.212866] hub 4-0:1.0: standalone hub
[ 2.212868] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.212870] hub 4-0:1.0: individual port over-current protection
[ 2.212872] hub 4-0:1.0: power on to power good time: 2ms
[ 2.212887] hub 4-0:1.0: local power source is good
[ 2.212890] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.213166] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 2.213216] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.213227] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.213231] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.213419] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.213433] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.213440] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.213442] uhci_hcd 0000:00:1d.3: Performing full reset
[ 2.213467] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[ 2.213544] usb usb5: default language 0x0409
[ 2.213564] usb usb5: udev 1, busnum 5, minor = 512
[ 2.213567] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.213569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.213572] usb usb5: Product: UHCI Host Controller
[ 2.213574] usb usb5: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.213576] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.213791] usb usb5: usb_probe_device
[ 2.213794] usb usb5: configuration #1 chosen from 1 choice
[ 2.213811] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 2.213950] hub 5-0:1.0: usb_probe_interface
[ 2.213953] hub 5-0:1.0: usb_probe_interface - got id
[ 2.213958] hub 5-0:1.0: USB hub found
[ 2.213969] hub 5-0:1.0: 2 ports detected
[ 2.213972] hub 5-0:1.0: standalone hub
[ 2.213973] hub 5-0:1.0: no power switching (usb 1.0)
[ 2.213975] hub 5-0:1.0: individual port over-current protection
[ 2.213978] hub 5-0:1.0: power on to power good time: 2ms
[ 2.213992] hub 5-0:1.0: local power source is good
[ 2.213995] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 2.214276] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[ 2.214644] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.222775] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.223011] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.223411] mice: PS/2 mouse device common for all mice
[ 2.225003] coretemp coretemp.0: TjMax is assumed as 100 C!
[ 2.771584] coretemp coretemp.1: TjMax is assumed as 100 C!
[ 2.771855] cpuidle: using governor ladder
[ 2.771858] cpuidle: using governor menu
[ 2.772246] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 2.772348] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
[ 2.772392] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00
[ 2.772399] hub 2-0:1.0: port 2: status 0301 change 0003
[ 2.772482] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
[ 2.772509] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[ 2.775109] input: AT Translated Set 2 keyboard as /class/input/input4
[ 2.776017] usbcore: registered new interface driver usbhid
[ 2.776019] usbhid: USB HID core driver
[ 2.776551] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.776558] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 2.776647] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 2.776710] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2.776767] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.777270] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.777274] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.777278] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.777510] ata1.00: configured for UDMA/133
[ 2.788627] ata1.00: configured for UDMA/133
[ 2.788632] ata1: EH complete
[ 2.789162] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 2.790257] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.790392] sd 0:0:0:0: [sda] Write Protect is off
[ 2.790395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.790451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.791974] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.792071] sda: sda1 sda2 sda3 < sda5 >
[ 2.923690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.924317] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
[ 2.924324] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 2.924332] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
[ 3.024146] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 3.024195] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[ 3.041754] ALSA device list:
[ 3.053626] #0: HDA Intel at 0xee400000 irq 46
[ 3.065542] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.076189] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
[ 3.076195] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 3.076202] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
[ 3.079218] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.091458] TCP cubic registered
[ 3.103388] NET: Registered protocol family 17
[ 3.132035] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 3.132079] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
[ 3.132127] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.132140] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.132151] hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000
[ 3.132172] hub 2-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 3.244029] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.376023] usb usb3: suspend_rh (auto-stop)
[ 3.376050] usb usb4: suspend_rh (auto-stop)
[ 3.410352] usb 2-2: skipped 1 descriptor after interface
[ 3.415344] usb 2-2: default language 0x0409
[ 3.432348] usb 2-2: udev 2, busnum 2, minor = 129
[ 3.432351] usb 2-2: New USB device found, idVendor=045e, idProduct=0084
[ 3.444420] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.456484] usb 2-2: Product: Basic Optical Mouse
[ 3.468498] usb 2-2: Manufacturer: Microsoft
[ 3.480835] usb 2-2: usb_probe_device
[ 3.480840] usb 2-2: configuration #1 chosen from 1 choice
[ 3.483359] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 3.483512] usbhid 2-2:1.0: usb_probe_interface
[ 3.483516] usbhid 2-2:1.0: usb_probe_interface - got id
[ 3.496818] input: Microsoft Basic Optical Mouse as /class/input/input5
[ 3.509928] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 3.523142] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
[ 3.523156] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
[ 3.523171] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 3.632729] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 3.645810] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.658990] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 3.700760] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 3.718334] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
[ 3.735286] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.749065] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 3.763242] Freeing unused kernel memory: 416k freed
[ 3.768038] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.790652] Write protecting the kernel read-only data: 10240k
[ 3.805307] Freeing unused kernel memory: 1708k freed
[ 3.820378] Freeing unused kernel memory: 1944k freed
[ 3.943551] usb 5-1: skipped 1 descriptor after interface
[ 3.948534] usb 5-1: default language 0x0409
[ 3.958546] usb 5-1: udev 2, busnum 5, minor = 513
[ 3.958550] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 3.972456] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.986517] usb 5-1: Product: BCM2045B
[ 4.000587] usb 5-1: Manufacturer: Broadcom Corp
[ 4.015103] usb 5-1: usb_probe_device
[ 4.015109] usb 5-1: configuration #1 chosen from 1 choice
[ 4.017566] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 4.017909] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
[ 4.018153] usb 5-1: adding 5-1:1.2 (config #1, interface 2)
[ 4.018363] usb 5-1: adding 5-1:1.3 (config #1, interface 3)
[ 4.018755] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
[ 4.018771] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 4.144046] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 4.256042] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4.388040] usb 5-2: ep0 maxpacket = 8
[ 4.411530] usb 5-2: default language 0x0409
[ 4.430536] usb 5-2: udev 3, busnum 5, minor = 514
[ 4.430540] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 4.445937] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.460979] usb 5-2: Product: Biometric Coprocessor
[ 4.476073] usb 5-2: Manufacturer: STMicroelectronics
[ 4.491456] usb 5-2: usb_probe_device
[ 4.491460] usb 5-2: configuration #1 chosen from 1 choice
[ 4.493540] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 4.494230] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.808208] hub 1-0:1.0: hub_suspend
[ 5.808297] usb usb1: bus auto-suspend
[ 5.808301] ehci_hcd 0000:00:1d.7: suspend root hub
[ 5.808417] hub 3-0:1.0: hub_suspend
[ 5.808425] usb usb3: bus auto-suspend
[ 5.808437] usb usb3: suspend_rh
[ 5.808461] hub 4-0:1.0: hub_suspend
[ 5.808469] usb usb4: bus auto-suspend
[ 5.808472] usb usb4: suspend_rh
[ 9.426310] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 9.679115] input: TPPS/2 IBM TrackPoint as /class/input/input7
[ 20.584555] udev: starting version 146
[ 20.584557] <3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
[ 20.616606] udevd (1267): /proc/1267/oom_adj is deprecated, please use /proc/1267/oom_score_adj instead.
[ 21.179313] ACPI: acpi_idle registered with cpuidle
[ 21.252765] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
[ 21.277359] ACPI: AC Adapter [AC] (on-line)
[ 21.277756] e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
[ 21.277816] e1000e 0000:02:00.0: Disabling ASPM L1
[ 21.277844] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.277862] e1000e 0000:02:00.0: setting latency timer to 64
[ 21.278131] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 21.278523] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 21.368477] Monitor-Mwait will be used to enter C-1 state
[ 21.372121] Monitor-Mwait will be used to enter C-2 state
[ 21.376132] Monitor-Mwait will be used to enter C-3 state
[ 21.392885] ACPI: Battery Slot [BAT0] (battery present)
[ 21.394781] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:e3:2c:76
[ 21.394785] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 21.394924] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 21.463448] thermal LNXTHERM:01: registered as thermal_zone0
[ 21.481781] cfg80211: Calling CRDA to update world regulatory domain
[ 21.505004] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 21.506107] ACPI: Thermal Zone [THM0] (59 C)
[ 21.507768] thermal LNXTHERM:02: registered as thermal_zone1
[ 21.507792] ACPI: Thermal Zone [THM1] (66 C)
[ 21.511001] irda_init()
[ 21.511111] NET: Registered protocol family 23
[ 21.593724] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 21.613694] thinkpad_acpi: ThinkPad BIOS 79ETD9WW (2.19 ), EC 79HT50WW-1.07
[ 21.634604] Bluetooth: Core ver 2.15
[ 21.635518] thinkpad_acpi: Lenovo ThinkPad T60, model 2007FUG
[ 21.635521] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[ 21.635523] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[ 21.638617] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 21.638845] thinkpad_acpi: radio switch found; radios are enabled
[ 21.646954] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 21.646957] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 21.657172] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 21.659680] Registered led device: tpacpi::thinklight
[ 21.660203] Registered led device: tpacpi::power
[ 21.660883] Registered led device: tpacpi::standby
[ 21.661265] Registered led device: tpacpi::thinkvantage
[ 21.664102] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 21.665786] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 21.672486] input: ThinkPad Extra Buttons as /class/input/input8
[ 21.772560] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 21.772563] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 21.772782] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 21.772799] iwl3945 0000:03:00.0: setting latency timer to 64
[ 21.826605] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 21.826609] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 21.826804] iwl3945 0000:03:00.0: irq 48 for MSI/MSI-X
[ 21.833238] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 21.847961] nsc-ircc 00:0a: activated
[ 21.847966] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 21.848339] nsc-ircc, chip->init
[ 21.848354] nsc-ircc, Found chip at base=0x164e
[ 21.848396] nsc-ircc, driver loaded (Dag Brattli)
[ 21.850065] IrDA: Registered device irda0
[ 21.850069] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 22.065402] NET: Registered protocol family 31
[ 22.065405] Bluetooth: HCI device and connection manager initialized
[ 22.065487] Bluetooth: HCI socket layer initialized
[ 22.141593] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 22.141636] btusb 5-1:1.0: usb_probe_interface
[ 22.141639] btusb 5-1:1.0: usb_probe_interface - got id
[ 22.142165] btusb 5-1:1.2: usb_probe_interface
[ 22.142168] btusb 5-1:1.2: usb_probe_interface - got id
[ 22.142230] btusb 5-1:1.3: usb_probe_interface
[ 22.142232] btusb 5-1:1.3: usb_probe_interface - got id
[ 22.142276] usbcore: registered new interface driver btusb
[ 22.338837] Adding 1542200k swap on /dev/sda1. Priority:-1 extents:1 across:1542200k SS
[ 22.397499] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 22.497332] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 23.289790] EXT3-fs: barriers not enabled
[ 23.304152] kjournald starting. Commit interval 5 seconds
[ 23.318151] EXT3-fs (sda2): using internal journal
[ 23.332248] EXT3-fs (sda2): mounted filesystem with writeback data mode
[ 23.523596] fuse init (API version 7.15)
[ 25.220782] [drm] Setting GART location based on new memory map
[ 25.221561] [drm] Loading R500 Microcode
[ 25.222163] [drm] Num pipes: 1
[ 25.222179] [drm] writeback test succeeded in 2 usecs
[ 25.604249] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[ 26.094649] Bluetooth: L2CAP ver 2.15
[ 26.094655] Bluetooth: L2CAP socket layer initialized
[ 26.147809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.147814] Bluetooth: BNEP filters: protocol multicast
[ 26.181860] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.181864] Bluetooth: SCO socket layer initialized
[ 26.190291] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[ 26.348060] Bluetooth: RFCOMM TTY layer initialized
[ 26.348074] Bluetooth: RFCOMM socket layer initialized
[ 26.348077] Bluetooth: RFCOMM ver 1.11
[ 30.080907] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 30.136263] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 30.153545] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 32.298941] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 32.298949] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 33.628610] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 35.234095] RPC: Registered udp transport module.
[ 35.234101] RPC: Registered tcp transport module.
[ 35.234104] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 41.384898] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 51.614500] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 61.226257] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3)
[ 61.229462] wlan0: authenticate with 00:27:19:16:04:fa (try 1)
[ 61.232450] wlan0: authenticated
[ 61.234072] wlan0: associate with 00:27:19:16:04:fa (try 1)
[ 61.236955] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=3)
[ 61.236962] wlan0: associated
[ 61.244315] wlan0: deauthenticated from 00:27:19:16:04:fa (Reason: 7)
[ 61.256989] cfg80211: Calling CRDA to update world regulatory domain
[ 61.761554] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 63.946342] wlan0: authenticate with 00:27:19:16:04:fa (try 1)
[ 63.948231] wlan0: authenticated
[ 63.948391] wlan0: associate with 00:27:19:16:04:fa (try 1)
[ 63.950846] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=5)
[ 63.950853] wlan0: associated
[ 71.774631] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 81.854673] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 91.917681] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 101.997769] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 112.027842] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 122.257803] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 132.287885] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 142.400870] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 152.480920] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 173.023815] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 193.566699] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 214.093578] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 234.369630] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 254.713618] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 274.972647] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 294.183288] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 304.096138] EXT4-fs (sda5): error count: 239
[ 304.096151] EXT4-fs (sda5): initial error at 1282834433: ext4_readdir:157: inode 212849
[ 304.096161] EXT4-fs (sda5): last error at 1282835128: ext4_readdir:157: inode 212907
[ 314.443344] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 334.769353] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 355.162305] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 375.280446] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 395.615428] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 415.825477] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 435.202031] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 455.678940] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 1651.552107] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.220.147.26 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=29298 DF PROTO=TCP SPT=56001 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A000527E077965DC1)
[ 1657.568086] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=80.249.165.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62180 DF PROTO=TCP SPT=40163 DPT=80 WINDOW=91 RES=0x00 ACK FIN URGP=0 OPT (0101080A00052DC0D809F3AE)
[ 1657.696093] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.63.181.49 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39253 DF PROTO=TCP SPT=37212 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00052DE0778F2045)
[ 1666.912123] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53492 DF PROTO=TCP SPT=36635 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A000536E010646B5B)
[ 1666.913253] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16011 DF PROTO=TCP SPT=36638 DPT=80 WINDOW=272 RES=0x00 ACK FIN URGP=0 OPT (0101080A000536E010646BAC)
[ 1674.976060] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.122.217.40 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22867 DF PROTO=TCP SPT=56201 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A00053EC0163B52F3)
[ 1702.240076] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=80.249.165.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30937 DF PROTO=TCP SPT=40186 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00055960D80A20BA)
[ 1716.448080] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=20694 DF PROTO=TCP SPT=36664 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00056740106489F9)
[ 2471.392095] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16717 DF PROTO=TCP SPT=35311 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A00084880210467DF)
[ 2531.424110] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58622 DF PROTO=TCP SPT=55494 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008832021047F4F)
[ 4187.104136] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=20383 DF PROTO=TCP SPT=44196 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A000ED4002106FDD7)
[ 5321.184104] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37211 DF PROTO=TCP SPT=43457 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A001327802108B309)
[ 9325.664086] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31410 DF PROTO=TCP SPT=44621 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A)
[ 9325.664153] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42686 DF PROTO=TCP SPT=44619 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A)
[ 9325.664199] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51599 DF PROTO=TCP SPT=44620 DPT=80 WINDOW=145 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A)
[ 9782.752110] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=19184 DF PROTO=TCP SPT=42559 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9786.848144] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=23185 DF PROTO=TCP SPT=42560 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9796.064101] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.78 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=62371 DF PROTO=TCP SPT=45784 DPT=80 WINDOW=525 RES=0x00 ACK FIN URGP=0
[ 9805.280113] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.77 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=28595 DF PROTO=TCP SPT=47167 DPT=80 WINDOW=206 RES=0x00 ACK FIN URGP=0
[ 9816.800073] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12081 DF PROTO=TCP SPT=42581 DPT=80 WINDOW=434 RES=0x00 ACK FIN URGP=0
[ 9865.568103] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.196.65.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44200 DF PROTO=TCP SPT=59036 DPT=80 WINDOW=101 RES=0x00 ACK FIN URGP=0 OPT (0101080A00247D608DB3593F)
[ 9874.656107] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.196.65.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21578 DF PROTO=TCP SPT=59035 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0 OPT (0101080A00248640724BF549)
[ 9891.168152] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12598 DF PROTO=TCP SPT=42630 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9902.816121] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=44708 DF PROTO=TCP SPT=53299 DPT=80 WINDOW=365 RES=0x00 ACK FIN URGP=0
[ 9904.864101] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.77 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=51208 DF PROTO=TCP SPT=47246 DPT=80 WINDOW=183 RES=0x00 ACK FIN URGP=0
[ 9905.888098] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=48629 DF PROTO=TCP SPT=42658 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9944.544109] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=32562 DF PROTO=TCP SPT=53355 DPT=80 WINDOW=160 RES=0x00 ACK FIN URGP=0
[ 9944.544201] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=31064 DF PROTO=TCP SPT=53357 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0
[14076.512085] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=195.111.192.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37133 DF PROTO=TCP SPT=43055 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00348DA01B812E86)
[24556.438376]
[24556.438378] =======================================================
[24556.438384] [ INFO: possible circular locking dependency detected ]
[24556.438387] 2.6.36-rc6-00084-gc6ea21e-dirty #99
[24556.438390] -------------------------------------------------------
[24556.438393] sh/19063 is trying to acquire lock:
[24556.438395] (s_active#121){++++.+}, at: [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a
[24556.438407]
[24556.438408] but task is already holding lock:
[24556.438410] (dbs_mutex){+.+.+.}, at: [<ffffffff8138642d>] cpufreq_governor_dbs+0x37c/0x427
[24556.438420]
[24556.438421] which lock already depends on the new lock.
[24556.438422]
[24556.438424]
[24556.438425] the existing dependency chain (in reverse order) is:
[24556.438427]
[24556.438428] -> #2 (dbs_mutex){+.+.+.}:
[24556.438433] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438440] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438445] [<ffffffff8144a677>] mutex_lock_nested+0x4b/0x2e6
[24556.438451] [<ffffffff81386127>] cpufreq_governor_dbs+0x76/0x427
[24556.438456] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c
[24556.438461] [<ffffffff81382f5b>] __cpufreq_set_policy+0x104/0x142
[24556.438465] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca
[24556.438470] [<ffffffff81383f4f>] store+0x56/0x79
[24556.438474] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438480] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438487] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438491] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.438497]
[24556.438498] -> #1 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}:
[24556.438503] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438508] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438512] [<ffffffff8144ab7f>] down_write+0x2c/0x4f
[24556.438517] [<ffffffff81382c80>] lock_policy_rwsem_write+0x4a/0x7a
[24556.438522] [<ffffffff81383f32>] store+0x39/0x79
[24556.438526] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438531] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438536] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438540] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.438545]
[24556.438546] -> #0 (s_active#121){++++.+}:
[24556.438552] [<ffffffff81067ee6>] validate_chain+0x727/0xd23
[24556.438557] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438561] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438566] [<ffffffff8111e87e>] sysfs_deactivate+0x8e/0xcb
[24556.438571] [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a
[24556.438575] [<ffffffff8111d236>] sysfs_hash_and_remove+0x54/0x78
[24556.438580] [<ffffffff8112074c>] sysfs_remove_group+0x90/0xc9
[24556.438584] [<ffffffff81386441>] cpufreq_governor_dbs+0x390/0x427
[24556.438589] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c
[24556.438594] [<ffffffff81382f45>] __cpufreq_set_policy+0xee/0x142
[24556.438599] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca
[24556.438604] [<ffffffff81383f4f>] store+0x56/0x79
[24556.438608] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438613] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438617] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438622] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.438627]
[24556.438628] other info that might help us debug this:
[24556.438629]
[24556.438632] 4 locks held by sh/19063:
[24556.438634] #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff8111db56>] sysfs_write_file+0x37/0x13f
[24556.438642] #1: (s_active#120){.+.+.+}, at: [<ffffffff8111dc01>] sysfs_write_file+0xe2/0x13f
[24556.438651] #2: (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at: [<ffffffff81382c80>] lock_policy_rwsem_write+0x4a/0x7a
[24556.438659] #3: (dbs_mutex){+.+.+.}, at: [<ffffffff8138642d>] cpufreq_governor_dbs+0x37c/0x427
[24556.438667]
[24556.438667] stack backtrace:
[24556.438671] Pid: 19063, comm: sh Not tainted 2.6.36-rc6-00084-gc6ea21e-dirty #99
[24556.438674] Call Trace:
[24556.438679] [<ffffffff810670c3>] print_circular_bug+0xae/0xbd
[24556.438684] [<ffffffff81067ee6>] validate_chain+0x727/0xd23
[24556.438689] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438694] [<ffffffff81066798>] ? mark_held_locks+0x52/0x70
[24556.438699] [<ffffffff81065450>] ? lockdep_init_map+0x9b/0x4fb
[24556.438703] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a
[24556.438707] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438711] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a
[24556.438716] [<ffffffff8111e87e>] sysfs_deactivate+0x8e/0xcb
[24556.438720] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a
[24556.438725] [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a
[24556.438730] [<ffffffff8111d236>] sysfs_hash_and_remove+0x54/0x78
[24556.438734] [<ffffffff8112074c>] sysfs_remove_group+0x90/0xc9
[24556.438739] [<ffffffff81386441>] cpufreq_governor_dbs+0x390/0x427
[24556.438744] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c
[24556.438749] [<ffffffff81382f45>] __cpufreq_set_policy+0xee/0x142
[24556.438754] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca
[24556.438758] [<ffffffff81384874>] ? handle_update+0x0/0xe
[24556.438763] [<ffffffff81383f4f>] store+0x56/0x79
[24556.438768] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438773] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438777] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438782] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.659027] [drm] Num pipes: 1
[24556.699853] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3)
[24556.712097] cfg80211: Calling CRDA to update world regulatory domain
[24556.749422] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
[24556.803392] PM: Syncing filesystems ... done.
[24556.858170] Freezing user space processes ... (elapsed 0.01 seconds) done.
[24556.872115] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[24556.888111] Suspending console(s) (use no_console_suspend to debug)
[24556.928402] usb 5-2: usb suspend
[24556.929620] btusb_intr_complete: hci0 urb ffff8800b8f0ce00 failed to resubmit (1)
[24556.929626] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
[24556.930622] btusb_bulk_complete: hci0 urb ffff8800b8f0ca40 failed to resubmit (1)
[24556.931621] btusb_bulk_complete: hci0 urb ffff8800b8f0c980 failed to resubmit (1)
[24556.931641] usb 5-1: usb suspend
[24557.083914] usb 2-2: usb suspend
[24557.083954] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[24557.084103] sd 0:0:0:0: [sda] Stopping disk
[24557.130236] hub 5-0:1.0: hub_suspend
[24557.130242] usb usb5: bus suspend
[24557.130245] usb usb5: suspend_rh
[24557.130289] hub 2-0:1.0: hub_suspend
[24557.130294] usb usb2: bus suspend
[24557.130296] usb usb2: suspend_rh
[24557.131578] nsc-ircc 00:0a: disabled
[24557.132114] pci 0000:01:00.0: PCI INT A disabled
[24557.132208] PIIX_IDE 0000:00:1f.1: PCI INT C disabled
[24557.132277] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[24557.132283] uhci_hcd 0000:00:1d.3: uhci_pci_suspend
[24557.132297] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[24557.132303] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[24557.132319] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[24557.132326] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[24557.132341] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[24557.132346] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[24557.132363] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[24557.132374] e1000e 0000:02:00.0: PCI INT A disabled
[24557.132386] e1000e 0000:02:00.0: PME# enabled
[24557.132398] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[24557.236106] HDA Intel 0000:00:1b.0: PCI INT B disabled
[24557.392044] PM: suspend of devices complete after 502.423 msecs
[24557.392520] ehci_hcd 0000:00:1d.7: wakeup: 0
[24557.436028] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[24557.436033] ehci_hcd 0000:00:1d.7: --> PCI D3hot
[24557.436065] uhci_hcd 0000:00:1d.3: wakeup: 0
[24557.436069] uhci_hcd 0000:00:1d.3: --> PCI D0
[24557.436101] uhci_hcd 0000:00:1d.2: wakeup: 0
[24557.460040] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[24557.460042] uhci_hcd 0000:00:1d.2: --> PCI D3hot
[24557.460074] uhci_hcd 0000:00:1d.1: wakeup: 0
[24557.460078] uhci_hcd 0000:00:1d.1: --> PCI D0
[24557.460109] uhci_hcd 0000:00:1d.0: wakeup: 0
[24557.484039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[24557.484042] uhci_hcd 0000:00:1d.0: --> PCI D3hot
[24557.484070] PM: late suspend of devices complete after 92.021 msecs
[24557.484321] ACPI: Preparing to enter system sleep state S3
[24557.644056] PM: Saving platform NVS memory
[24557.644059] Disabling non-boot CPUs ...
[24557.796032] CPU 1 is now offline
[24557.796034] lockdep: fixing up alternatives.
[24557.796038] SMP alternatives: switching to UP code
[24557.802701] Extended CMOS year: 2000
[24557.802701] Back to C!
[24557.802701] PM: Restoring platform NVS memory
[24557.802701] Extended CMOS year: 2000
[24557.802701] Enabling non-boot CPUs ...
[24557.804046] lockdep: fixing up alternatives.
[24557.804049] SMP alternatives: switching to SMP code
[24557.809957] Booting Node 0 Processor 1 APIC 0x1
[24557.972035] CPU1 is up
[24557.972393] ACPI: Waking up from system sleep state S3
[24558.324115] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324183] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[24558.324232] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001)
[24558.324251] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324331] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324402] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20007060, writing 0x7060)
[24558.324417] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324473] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b)
[24558.324489] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421)
[24558.324495] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00)
[24558.324502] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x9080)
[24558.324513] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[24558.324522] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[24558.368027] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.376039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.376071] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.384038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.392038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.392071] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.400038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.408038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.408069] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.416038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.424038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.424072] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.424120] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[24558.432038] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.440038] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.440079] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[24558.440218] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[24558.440832] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[24558.440963] pci 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3c0010b)
[24558.440971] pci 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0xa4fc)
[24558.440978] pci 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0xa400)
[24558.440986] pci 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0xa0fc)
[24558.440993] pci 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0xa000)
[24558.441001] pci 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0xc7fff000)
[24558.441009] pci 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xc4000000)
[24558.441016] pci 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000)
[24558.441024] pci 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000)
[24558.441031] pci 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615)
[24558.441041] pci 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000)
[24558.441049] pci 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808)
[24558.441059] pci 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[24558.441170] PM: early resume of devices complete after 117.123 msecs
[24558.441273] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[24558.441286] HDA Intel 0000:00:1b.0: setting latency timer to 64
[24558.441357] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[24558.441458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[24558.441466] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[24558.441471] uhci_hcd 0000:00:1d.1: uhci_pci_resume
[24558.441476] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2f00
[24558.441479] uhci_hcd 0000:00:1d.1: Performing full reset
[24558.441485] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.441504] usb usb3: root hub lost power or was reset
[24558.441534] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[24558.441548] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[24558.441554] uhci_hcd 0000:00:1d.3: uhci_pci_resume
[24558.441559] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[24558.441562] uhci_hcd 0000:00:1d.3: Performing full reset
[24558.441597] usb usb5: root hub lost power or was reset
[24558.441634] pci 0000:00:1e.0: setting latency timer to 64
[24558.441651] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[24558.441657] PIIX_IDE 0000:00:1f.1: setting latency timer to 64
[24558.441696] ahci 0000:00:1f.2: setting latency timer to 64
[24558.441733] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.441739] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[24558.441751] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[24558.441755] uhci_hcd 0000:00:1d.0: uhci_pci_resume
[24558.441760] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[24558.441762] uhci_hcd 0000:00:1d.0: Performing full reset
[24558.441778] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[24558.441791] e1000e 0000:02:00.0: PME# disabled
[24558.441792] usb usb2: root hub lost power or was reset
[24558.442002] e1000e 0000:02:00.0: Disabling ASPM L1
[24558.442004] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[24558.442067] pci 0000:01:00.0: power state changed by ACPI to D0
[24558.442085] pci 0000:01:00.0: power state changed by ACPI to D0
[24558.442092] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[24558.442111] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[24558.442132] pci 0000:01:00.0: setting latency timer to 64
[24558.442215] usb usb2: usb resume
[24558.442218] usb usb2: wakeup_rh
[24558.442234] usb usb3: usb resume
[24558.442236] usb usb3: wakeup_rh
[24558.442310] usb usb5: usb resume
[24558.442312] usb usb5: wakeup_rh
[24558.442375] sd 0:0:0:0: [sda] Starting disk
[24558.443020] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.443184] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.443191] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[24558.443199] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[24558.443204] uhci_hcd 0000:00:1d.2: uhci_pci_resume
[24558.443208] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[24558.443211] uhci_hcd 0000:00:1d.2: Performing full reset
[24558.443248] usb usb4: root hub lost power or was reset
[24558.443264] usb usb4: usb resume
[24558.443266] usb usb4: wakeup_rh
[24558.445408] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.445674] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.445688] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[24558.445745] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[24558.445836] usb usb1: usb resume
[24558.445847] ehci_hcd 0000:00:1d.7: resume root hub
[24558.456076] hub 2-0:1.0: hub_reset_resume
[24558.456082] hub 2-0:1.0: trying to enable port power on non-switchable hub
[24558.456105] hub 3-0:1.0: hub_reset_resume
[24558.456110] hub 3-0:1.0: trying to enable port power on non-switchable hub
[24558.456126] hub 5-0:1.0: hub_reset_resume
[24558.456131] hub 5-0:1.0: trying to enable port power on non-switchable hub
[24558.456148] hub 4-0:1.0: hub_reset_resume
[24558.456152] hub 4-0:1.0: trying to enable port power on non-switchable hub
[24558.463541] nsc-ircc 00:0a: activated
[24558.467693] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[24558.467943] hda: UDMA/33 mode selected
[24558.480120] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[24558.560113] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
[24558.560119] hub 5-0:1.0: port 1: status 0100 change 0003
[24558.560137] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[24558.560142] hub 5-0:1.0: port 2: status 0100 change 0003
[24558.560174] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00
[24558.560179] hub 2-0:1.0: port 2: status 0301 change 0003
[24558.576255] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
[24558.576261] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT
[24558.576504] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
[24558.576508] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT
[24558.576517] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
[24558.592081] hub 1-0:1.0: hub_resume
[24558.592114] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC
[24558.592128] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC
[24558.696101] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
[24558.696111] usb 2-2: finish reset-resume
[24558.696115] usb 5-1: finish reset-resume
[24558.696128] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
[24558.696137] usb 5-2: finish reset-resume
[24558.760086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[24558.760599] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[24558.760603] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[24558.760607] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[24558.762131] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[24558.762135] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[24558.762139] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[24558.762498] ata1.00: configured for UDMA/133
[24558.776974] ata1.00: configured for UDMA/133
[24558.776978] ata1: EH complete
[24558.956062] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[24559.356087] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[24559.502349] btusb 5-1:1.0: no reset_resume for driver btusb?
[24559.502353] btusb 5-1:1.1: no reset_resume for driver btusb?
[24559.502356] btusb 5-1:1.0: forced unbind
[24559.592086] usb usb3: suspend_rh (auto-stop)
[24559.592111] usb usb4: suspend_rh (auto-stop)
[24559.600086] usb 5-2: reset full speed USB device using uhci_hcd and address 3
[24559.732050] usb 5-2: ep0 maxpacket = 8
[24559.754571] PM: resume of devices complete after 1313.353 msecs
[24559.754659] btusb 5-1:1.0: usb_probe_interface
[24559.754662] btusb 5-1:1.0: usb_probe_interface - got id
[24559.757895] Restarting tasks ...
[24559.757938] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[24559.757956] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[24559.757969] hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000
[24559.757990] hub 2-0:1.0: port 2, status 0303, change 0000, 1.5 Mb/s
[24559.758001] hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0006
[24559.758017] hub 5-0:1.0: port 1, status 0103, change 0000, 12 Mb/s
[24559.758033] hub 5-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
[24559.758043] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[24559.784334] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[24559.787809] done.
[24559.787823] video LNXVIDEO:01: Restoring backlight state
[24559.862350] [drm] Num pipes: 1
[24560.085624] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[24560.496478] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[24560.552211] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[24561.824104] hub 4-0:1.0: hub_suspend
[24561.824121] usb usb4: bus auto-suspend
[24561.824127] usb usb4: suspend_rh
[24561.824155] hub 3-0:1.0: hub_suspend
[24561.824165] usb usb3: bus auto-suspend
[24561.824170] usb usb3: suspend_rh
[24561.824194] hub 1-0:1.0: hub_suspend
[24561.824204] usb usb1: bus auto-suspend
[24561.824209] ehci_hcd 0000:00:1d.7: suspend root hub
[24562.158720] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[24562.158732] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[24570.870068] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3)
[24570.883288] wlan0: authenticate with 00:27:19:16:04:fa (try 1)
[24570.885197] wlan0: authenticated
[24570.885266] wlan0: associate with 00:27:19:16:04:fa (try 1)
[24570.887675] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=4)
[24570.887682] wlan0: associated
[24633.952084] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=88.209.222.127 LEN=196 TOS=0x10 PREC=0x00 TTL=64 ID=23342 DF PROTO=TCP SPT=52499 DPT=22 WINDOW=501 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD3A0017F775F)
[24636.640084] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=74.125.43.105 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=64533 DF PROTO=TCP SPT=54502 DPT=80 WINDOW=203 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD640A326EB96)
[24636.768080] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=195.135.221.39 LEN=89 TOS=0x00 PREC=0x00 TTL=64 ID=20778 DF PROTO=TCP SPT=36890 DPT=993 WINDOW=4560 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD66012B71780)
[24637.856087] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=74.125.43.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=60716 DF PROTO=TCP SPT=58428 DPT=80 WINDOW=54 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD770F2904CF1)
[24637.856175] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.122.212.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49726 DF PROTO=TCP SPT=46810 DPT=80 WINDOW=54 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD7701CC60B9A)
[24671.584087] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=216.34.181.45 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47646 DF PROTO=TCP SPT=41016 DPT=80 WINDOW=524 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CF86078EF0CB3)
[30470.008057] CE: hpet increased min_delta_ns to 7500 nsec
[31534.592070] CE: hpet increased min_delta_ns to 11250 nsec
[32085.088181] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=199.6.1.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=17838 DF PROTO=TCP SPT=49116 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00794020AAD173F9)
[32086.112141] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=199.6.1.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41980 DF PROTO=TCP SPT=49115 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00794120AAD173F1)
3
9
Hello ALSA users
The new Alsamixer-Qt4 0.6.0 is now available at
http://xwmw.org/alsamixer-qt4/
http://sourceforge.net/projects/alsamixer-qt4/files/
Changes (from the CHANGELOG):
* New support for string localization (i18n)
* German string translations (l10n)
* Reintroduced some aspects of the old (0.5.1) widget style
* Slight color and contrast enhancements
* ToolTips hold playback/capture informations
* Requires Qt version 4.6 at minimum (4.4 before)
Regards,
Sebastian Holtermann
1
0