Alsa-devel

Download

alsa-devel@alsa-project.org

October 2010

143 participants
295 discussions

[alsa-devel] snd-usb-audio for Radikal Technologies SAC-2K
by Raphaël Doursenaud 20 Oct '10

20 Oct '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm working on getting the usb part of this very nice control surface to work with alsa. I sniffed the usb traffic of the windows driver then browsed the snd-usb-audio source code for clues. I managed to get it partially working using a modified QUIRK_MIDI_EMAGIC since the protocols are fairly similar (at least the 0xF5 port switching part). Please find attached the patch I came up to. I have a few problems and dark areas I hope you'll be able to light up a little : First, I more or less get the picture of what the code is doing but there's one part I fiddled with that I don't understand fully. What are the .out_cables and .in_cables bitmasks doing besides defining the number of ports ? Next, the input part seem to work flawlessly on all ports, but I have what seems to be a buffer overflow on the device when outputting midi data. Comparing the windows and linux usb traffic, something obvious shows up : the windows driver seem to be waiting for the device's acknowledgment after each sent byte before sending the next one while the snd-usb-audio module sends a bunch of bytes at once that ends up confusing the device _and_ module. How can I make it behave like the windows driver ? I have traffic and error logs available if needed. Thanks. - -- Raphaël Doursenaud http://raphael.doursenaud.fr -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAky+oqQACgkQaZKmNAdXaVUopgCgifnK+eSsCNpR5rx21iUqmXBQ wJIAoJlt4h7Tp8tYYSbg9ZfLekE1QQfL =d7vi -----END PGP SIGNATURE-----

2 2

[alsa-devel] PATCH[1/1] Add I2S common driver for Intel MID platform
by Le Gall, Louis 20 Oct '10

20 Oct '10

Hi, This patch set is for new I2S SSP common driver that supports I2S audio on Intel MID platforms. It is used for sending/receving I2S audio samples on Intel MID platform. This interface is mostly used on Intel MID platforms and provide the low level interface for some upper layer drivers such as Alsa sound card driver for Bluetooth/FM peripherals, char device interfaces for modem (cmt_speech),... As this is used to transfer speech frames from/to cellular modem that have specific timing constraints (and modem also uses the I2S path to send some side-info), the Alsa SoC interface cannot be used. It is based on low level part of cmt_speech driver that can be found in N900 (see http://lists.meego.com/pipermail/meego-kernel/2010-September/000078.html ). The intel_mid_i2s have been separated from cmt_speech in order to be more generic and to be used on other ports (for instance, to provide Alsa sound card driver for Bluetooth and FM). Upper level drivers cmt_speech and Alsa sound card driver that uses intel_mid_i2s will be up-streamed in coming days and is planned to use the same folder path (sound/pci/intel_mid_i2s/). So once these files will be upstream, this will provides Alsa sound driver interface for Bluetooth and FM for Intel Mid platform, and specific speech audio interface (char device) that is used by lib cmt speech data. I will provide soon some draft version of example driver that uses intel_mid_i2s so reviewers can have better understanding of how it is used and how it fits together. Best Regards, Louis Le Gall Here is a simple diagram that explain where is the intel_mid_i2s in software architecture. +-----------+ | | |Pulse Audio| | | | | +-----------+ | | +------------+------------+ | | | | | | +-----------+ +-----------+ | | |Lib cmt | |Alsa Lib |------+ |speech |------+ | | | |data | | | | | | | | +-----------+ | +-----------+ | | | | | | | User ......|............|.........................|................................. | | | Kernel | | | | | | | | | | | | | | | | | | \|/ \|/ \|/ V V V +---------+ ++---------++ ++---------++ | | ||Alsa snd || ||cmt || |Intel SST| ||driver || ||speech || | "MAD" | ||SSP || ||driver || | | ||BT/FM || || || +---------+ ++---------++ ++---------++ | | | | | | | | | | | | \|/ | \|/ V | V +-----------+ | ++---------++ | | | \ ||intel mid|| |LPE | +------------------>||i2s || | | / ||unified || | | ||driver || +-----------+ ++---------++ | | | | Kernel ......|......................................|................................. | | Hardware \|/ \|/ V V +-- --+ +-- --+ | | | | |MISC | |SSP in I2S | | | |config | | | | | +-- --+ +-- --+

4 5

[alsa-devel] [PATCH v4 0/9] Add Omapl138-Hawkboard support
by vm.rod25＠gmail.com 19 Oct '10

19 Oct '10

From: Victor Rodriguez <victor.rodriguez(a)sasken.com> This patch adds EMAC, EDMA, ASoC, SOUND, MMC/SD and USB OHCI support for the Hawkboard-L138 system It is under the machine name "omapl138_hawkboard". This system is based on the da850 davinci CPU architecture. Victor Rodriguez (9): davinci: EMAC support for Omapl138-Hawkboard davinci: EDMA support for Omapl138-Hawkboard davinci: ASoC support for Omapl138-Hawkboard davinci: McASP configuration for Omapl138-Hawkboard davinci: Audio support for Omapl138-Hawkboard davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard davinci: MMC/SD support for Omapl138-Hawkboar davinci: USB clocks for Omapl138-Hawkboard davinci: USB1.1 support for Omapl138-Hawkboard arch/arm/mach-davinci/board-omapl138-hawk.c | 308 +++++++++++++++++++++++++++ arch/arm/mach-davinci/da850.c | 22 ++- arch/arm/mach-davinci/include/mach/mux.h | 4 + sound/soc/davinci/Kconfig | 5 +- sound/soc/davinci/davinci-evm.c | 6 +- 5 files changed, 340 insertions(+), 5 deletions(-)

5 21

Re: [alsa-devel] -32 broken pipe
by Clemens Ladisch 19 Oct '10

19 Oct '10

Cem ERGEN wrote: > how could i learn sample format? /proc/asound/cardX/stream0 Regards, Clemens

1 0

[alsa-devel] sst: Intel SST audio driver
by Koul, Vinod 19 Oct '10

19 Oct '10

> ... so the whole messages can be reduced to a sentense: > "Rewrite the driver based on ASoC!" > > Then it's a question to Intel guys. If they would like to support for > it, we can happily wait for it before merging. If they don't want but > keep as is, then questions are: > - whether to keep it in upstream or not > - where to keep it, in staging or in sound tree > > and, the latter question is nothing but a bikeshedding; in anyway it's > a second choice, after all. We should spend time for more useful > things :) Yes Intel is planning to rewrite the sound card driver for ASoC. I will take us little time for that :-) Meanwhile IMO it would be great to have this driver in staging or in sound whichever you guys agree to ~Vinod

2 1

[alsa-devel] Newbie needs help to understand SNDRV_PCM_TRIGGER_START?
by Radivoje Jovanovic 19 Oct '10

19 Oct '10

I am writing my first ALSA driver. We have hardware where the amp is controlled with another CPU (non Linux) so I have to forward the buffers from ALSA to it. We do not have working solution on another CPU so I cannot test sound playback yet. ALSA hits trigger method in my driver and soon after it leaves my trigger method throws an null pointer exception (probably since I did not do anything in my trigger method). I am wondering if the ALSA will call SNDRV_PCM_TRIGGER_START every single time new buffer is available. Do I need to manage circular queue of buffers or ALSA is doing this for me already? Thanx

2 1

[alsa-devel] [PATCH 01/25] ASoC: WM8580: Remove useless assignment
by Jassi Brar 19 Oct '10

19 Oct '10

From: Jassi Brar <jassi.brar(a)samsung.com> The variable is not used anyway. Signed-off-by: Jassi Brar <jassi.brar(a)samsung.com> --- sound/soc/codecs/wm8580.c | 4 ---- 1 files changed, 0 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index ad5987e..a2e0ed5 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -548,11 +548,9 @@ static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_codec *codec = codec_dai->codec; - struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec); unsigned int aifa; unsigned int aifb; int can_invert_lrclk; - int sysclk; aifa = snd_soc_read(codec, WM8580_PAIF1 + codec_dai->driver->id); aifb = snd_soc_read(codec, WM8580_PAIF3 + codec_dai->driver->id); @@ -621,8 +619,6 @@ static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; } - sysclk = wm8580->sysclk[codec_dai->driver->id]; - snd_soc_write(codec, WM8580_PAIF1 + codec_dai->driver->id, aifa); snd_soc_write(codec, WM8580_PAIF3 + codec_dai->driver->id, aifb); -- 1.6.2.5

3 2

[alsa-devel] [PATCH] ASoC: Fix I2C component device id number creation
by Jarkko Nikula 19 Oct '10

19 Oct '10

Use bitwise AND instead of logical AND when masking. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- Random note, not known to cause any problems at the moment as id field of codec seems to be unused. --- sound/soc/soc-core.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 8751efd..fe9f20b 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2892,7 +2892,7 @@ static inline char *fmt_single_name(struct device *dev, int *id) char tmp[NAME_SIZE]; /* create unique ID number from I2C addr and bus */ - *id = ((id1 && 0xffff) << 16) + id2; + *id = ((id1 & 0xffff) << 16) + id2; /* sanitize component name for DAI link creation */ snprintf(tmp, NAME_SIZE, "%s.%s", dev->driver->name, name); -- 1.7.1

3 2

[alsa-devel] [PATCH 25/25] ASoC: Samsung: Rename from s3c24xx to samsung
by Jassi Brar 19 Oct '10

19 Oct '10

From: Jassi Brar <jassi.brar(a)samsung.com> Finally, move the 's3c24xx' directory to 'samsung' Signed-off-by: Jassi Brar <jassi.brar(a)samsung.com> --- sound/soc/Kconfig | 2 +- sound/soc/Makefile | 2 +- sound/soc/s3c24xx/Kconfig | 154 --- sound/soc/s3c24xx/Makefile | 51 - sound/soc/s3c24xx/ac97.c | 520 ---------- sound/soc/s3c24xx/ac97.h | 21 - sound/soc/s3c24xx/dma.c | 503 ---------- sound/soc/s3c24xx/dma.h | 30 - sound/soc/s3c24xx/goni_wm8994.c | 309 ------ sound/soc/s3c24xx/i2s.c | 1251 ------------------------ sound/soc/s3c24xx/i2s.h | 29 - sound/soc/s3c24xx/jive_wm8750.c | 191 ---- sound/soc/s3c24xx/lm4857.h | 32 - sound/soc/s3c24xx/ln2440sbc_alc650.c | 78 -- sound/soc/s3c24xx/neo1973_gta02_wm8753.c | 504 ---------- sound/soc/s3c24xx/neo1973_wm8753.c | 704 ------------- sound/soc/s3c24xx/pcm.c | 552 ----------- sound/soc/s3c24xx/pcm.h | 124 --- sound/soc/s3c24xx/regs-i2s-v2.h | 115 --- sound/soc/s3c24xx/rx1950_uda1380.c | 333 ------- sound/soc/s3c24xx/s3c-i2s-v2.c | 757 -------------- sound/soc/s3c24xx/s3c-i2s-v2.h | 106 -- sound/soc/s3c24xx/s3c2412-i2s.c | 212 ---- sound/soc/s3c24xx/s3c2412-i2s.h | 27 - sound/soc/s3c24xx/s3c24xx-i2s.c | 519 ---------- sound/soc/s3c24xx/s3c24xx-i2s.h | 35 - sound/soc/s3c24xx/s3c24xx_simtec.c | 395 -------- sound/soc/s3c24xx/s3c24xx_simtec.h | 22 - sound/soc/s3c24xx/s3c24xx_simtec_hermes.c | 146 --- sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c | 134 --- sound/soc/s3c24xx/s3c24xx_uda134x.c | 368 ------- sound/soc/s3c24xx/smartq_wm8987.c | 287 ------ sound/soc/s3c24xx/smdk2443_wm9710.c | 74 -- sound/soc/s3c24xx/smdk_spdif.c | 223 ----- sound/soc/s3c24xx/smdk_wm8580.c | 284 ------ sound/soc/s3c24xx/smdk_wm9713.c | 107 -- sound/soc/s3c24xx/spdif.c | 501 ---------- sound/soc/s3c24xx/spdif.h | 19 - sound/soc/samsung/Kconfig | 154 +++ sound/soc/samsung/Makefile | 51 + sound/soc/samsung/ac97.c | 520 ++++++++++ sound/soc/samsung/ac97.h | 21 + sound/soc/samsung/dma.c | 503 ++++++++++ sound/soc/samsung/dma.h | 30 + sound/soc/samsung/goni_wm8994.c | 309 ++++++ sound/soc/samsung/i2s.c | 1251 ++++++++++++++++++++++++ sound/soc/samsung/i2s.h | 29 + sound/soc/samsung/jive_wm8750.c | 191 ++++ sound/soc/samsung/lm4857.h | 32 + sound/soc/samsung/ln2440sbc_alc650.c | 78 ++ sound/soc/samsung/neo1973_gta02_wm8753.c | 504 ++++++++++ sound/soc/samsung/neo1973_wm8753.c | 704 +++++++++++++ sound/soc/samsung/pcm.c | 552 +++++++++++ sound/soc/samsung/pcm.h | 124 +++ sound/soc/samsung/regs-i2s-v2.h | 115 +++ sound/soc/samsung/rx1950_uda1380.c | 333 +++++++ sound/soc/samsung/s3c-i2s-v2.c | 757 ++++++++++++++ sound/soc/samsung/s3c-i2s-v2.h | 106 ++ sound/soc/samsung/s3c2412-i2s.c | 212 ++++ sound/soc/samsung/s3c2412-i2s.h | 27 + sound/soc/samsung/s3c24xx-i2s.c | 519 ++++++++++ sound/soc/samsung/s3c24xx-i2s.h | 35 + sound/soc/samsung/s3c24xx_simtec.c | 395 ++++++++ sound/soc/samsung/s3c24xx_simtec.h | 22 + sound/soc/samsung/s3c24xx_simtec_hermes.c | 146 +++ sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c | 134 +++ sound/soc/samsung/s3c24xx_uda134x.c | 368 +++++++ sound/soc/samsung/smartq_wm8987.c | 287 ++++++ sound/soc/samsung/smdk2443_wm9710.c | 74 ++ sound/soc/samsung/smdk_spdif.c | 223 +++++ sound/soc/samsung/smdk_wm8580.c | 284 ++++++ sound/soc/samsung/smdk_wm9713.c | 107 ++ sound/soc/samsung/spdif.c | 501 ++++++++++ sound/soc/samsung/spdif.h | 19 + 74 files changed, 9719 insertions(+), 9719 deletions(-) delete mode 100644 sound/soc/s3c24xx/Kconfig delete mode 100644 sound/soc/s3c24xx/Makefile delete mode 100644 sound/soc/s3c24xx/ac97.c delete mode 100644 sound/soc/s3c24xx/ac97.h delete mode 100644 sound/soc/s3c24xx/dma.c delete mode 100644 sound/soc/s3c24xx/dma.h delete mode 100644 sound/soc/s3c24xx/goni_wm8994.c delete mode 100644 sound/soc/s3c24xx/i2s.c delete mode 100644 sound/soc/s3c24xx/i2s.h delete mode 100644 sound/soc/s3c24xx/jive_wm8750.c delete mode 100644 sound/soc/s3c24xx/lm4857.h delete mode 100644 sound/soc/s3c24xx/ln2440sbc_alc650.c delete mode 100644 sound/soc/s3c24xx/neo1973_gta02_wm8753.c delete mode 100644 sound/soc/s3c24xx/neo1973_wm8753.c delete mode 100644 sound/soc/s3c24xx/pcm.c delete mode 100644 sound/soc/s3c24xx/pcm.h delete mode 100644 sound/soc/s3c24xx/regs-i2s-v2.h delete mode 100644 sound/soc/s3c24xx/rx1950_uda1380.c delete mode 100644 sound/soc/s3c24xx/s3c-i2s-v2.c delete mode 100644 sound/soc/s3c24xx/s3c-i2s-v2.h delete mode 100644 sound/soc/s3c24xx/s3c2412-i2s.c delete mode 100644 sound/soc/s3c24xx/s3c2412-i2s.h delete mode 100644 sound/soc/s3c24xx/s3c24xx-i2s.c delete mode 100644 sound/soc/s3c24xx/s3c24xx-i2s.h delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec.c delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec.h delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec_hermes.c delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c delete mode 100644 sound/soc/s3c24xx/s3c24xx_uda134x.c delete mode 100644 sound/soc/s3c24xx/smartq_wm8987.c delete mode 100644 sound/soc/s3c24xx/smdk2443_wm9710.c delete mode 100644 sound/soc/s3c24xx/smdk_spdif.c delete mode 100644 sound/soc/s3c24xx/smdk_wm8580.c delete mode 100644 sound/soc/s3c24xx/smdk_wm9713.c delete mode 100644 sound/soc/s3c24xx/spdif.c delete mode 100644 sound/soc/s3c24xx/spdif.h create mode 100644 sound/soc/samsung/Kconfig create mode 100644 sound/soc/samsung/Makefile create mode 100644 sound/soc/samsung/ac97.c create mode 100644 sound/soc/samsung/ac97.h create mode 100644 sound/soc/samsung/dma.c create mode 100644 sound/soc/samsung/dma.h create mode 100644 sound/soc/samsung/goni_wm8994.c create mode 100644 sound/soc/samsung/i2s.c create mode 100644 sound/soc/samsung/i2s.h create mode 100644 sound/soc/samsung/jive_wm8750.c create mode 100644 sound/soc/samsung/lm4857.h create mode 100644 sound/soc/samsung/ln2440sbc_alc650.c create mode 100644 sound/soc/samsung/neo1973_gta02_wm8753.c create mode 100644 sound/soc/samsung/neo1973_wm8753.c create mode 100644 sound/soc/samsung/pcm.c create mode 100644 sound/soc/samsung/pcm.h create mode 100644 sound/soc/samsung/regs-i2s-v2.h create mode 100644 sound/soc/samsung/rx1950_uda1380.c create mode 100644 sound/soc/samsung/s3c-i2s-v2.c create mode 100644 sound/soc/samsung/s3c-i2s-v2.h create mode 100644 sound/soc/samsung/s3c2412-i2s.c create mode 100644 sound/soc/samsung/s3c2412-i2s.h create mode 100644 sound/soc/samsung/s3c24xx-i2s.c create mode 100644 sound/soc/samsung/s3c24xx-i2s.h create mode 100644 sound/soc/samsung/s3c24xx_simtec.c create mode 100644 sound/soc/samsung/s3c24xx_simtec.h create mode 100644 sound/soc/samsung/s3c24xx_simtec_hermes.c create mode 100644 sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c create mode 100644 sound/soc/samsung/s3c24xx_uda134x.c create mode 100644 sound/soc/samsung/smartq_wm8987.c create mode 100644 sound/soc/samsung/smdk2443_wm9710.c create mode 100644 sound/soc/samsung/smdk_spdif.c create mode 100644 sound/soc/samsung/smdk_wm8580.c create mode 100644 sound/soc/samsung/smdk_wm9713.c create mode 100644 sound/soc/samsung/spdif.c create mode 100644 sound/soc/samsung/spdif.h diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 3e598e7..2722b19 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -36,7 +36,7 @@ source "sound/soc/nuc900/Kconfig" source "sound/soc/omap/Kconfig" source "sound/soc/kirkwood/Kconfig" source "sound/soc/pxa/Kconfig" -source "sound/soc/s3c24xx/Kconfig" +source "sound/soc/samsung/Kconfig" source "sound/soc/s6000/Kconfig" source "sound/soc/sh/Kconfig" source "sound/soc/txx9/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index eb18344..ce913bf 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -14,7 +14,7 @@ obj-$(CONFIG_SND_SOC) += nuc900/ obj-$(CONFIG_SND_SOC) += omap/ obj-$(CONFIG_SND_SOC) += kirkwood/ obj-$(CONFIG_SND_SOC) += pxa/ -obj-$(CONFIG_SND_SOC) += s3c24xx/ +obj-$(CONFIG_SND_SOC) += samsung/ obj-$(CONFIG_SND_SOC) += s6000/ obj-$(CONFIG_SND_SOC) += sh/ obj-$(CONFIG_SND_SOC) += txx9/ diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig deleted file mode 100644 index 140095e..0000000 --- a/sound/soc/s3c24xx/Kconfig +++ /dev/null @@ -1,154 +0,0 @@ -config ASOC_SAMSUNG - tristate "ASoC support for Samsung" - depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 - select S3C64XX_DMA if ARCH_S3C64XX - help - Say Y or M if you want to add support for codecs attached to - the Samsung SoCs' Audio interfaces. You will also need to - select the audio interfaces to support below. - -config SND_S3C24XX_I2S - tristate - select S3C2410_DMA - -config SND_S3C_I2SV2_SOC - tristate - -config SND_S3C2412_SOC_I2S - tristate - select SND_S3C_I2SV2_SOC - select S3C2410_DMA - -config SND_SAMSUNG_PCM - tristate - -config SND_SAMSUNG_AC97 - tristate - select SND_SOC_AC97_BUS - -config SND_SAMSUNG_SPDIF - tristate - select SND_SOC_SPDIF - -config SND_SAMSUNG_I2S - tristate - -config ASOC_SAMSUNG_NEO1973_WM8753 - tristate "SoC I2S Audio support for NEO1973 - WM8753" - depends on ASOC_SAMSUNG && MACH_NEO1973_GTA01 - select SND_S3C24XX_I2S - select SND_SOC_WM8753 - help - Say Y if you want to add support for SoC audio on smdk2440 - with the WM8753. - -config ASOC_SAMSUNG_NEO1973_GTA02_WM8753 - tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)" - depends on ASOC_SAMSUNG && MACH_NEO1973_GTA02 - select SND_S3C24XX_I2S - select SND_SOC_WM8753 - help - This driver provides audio support for the Openmoko Neo FreeRunner - smartphone. - -config ASOC_SAMSUNG_JIVE_WM8750 - tristate "SoC I2S Audio support for Jive" - depends on ASOC_SAMSUNG && MACH_JIVE - select SND_SOC_WM8750 - select SND_S3C2412_SOC_I2S - help - Sat Y if you want to add support for SoC audio on the Jive. - -config ASOC_SAMSUNG_SMDK_WM8580 - tristate "SoC I2S Audio support for WM8580 on SMDK" - depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100) - select SND_SOC_WM8580 - select SND_SAMSUNG_I2S - help - Say Y if you want to add support for SoC audio on the SMDKs. - -config ASOC_SAMSUNG_SMDK2443_WM9710 - tristate "SoC AC97 Audio support for SMDK2443 - WM9710" - depends on ASOC_SAMSUNG && MACH_SMDK2443 - select S3C2410_DMA - select AC97_BUS - select SND_SOC_AC97_CODEC - select SND_SAMSUNG_AC97 - help - Say Y if you want to add support for SoC audio on smdk2443 - with the WM9710. - -config ASOC_SAMSUNG_LN2440SBC_ALC650 - tristate "SoC AC97 Audio support for LN2440SBC - ALC650" - depends on ASOC_SAMSUNG && ARCH_S3C2410 - select S3C2410_DMA - select AC97_BUS - select SND_SOC_AC97_CODEC - select SND_SAMSUNG_AC97 - help - Say Y if you want to add support for SoC audio on ln2440sbc - with the ALC650. - -config ASOC_SAMSUNG_S3C24XX_UDA134X - tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" - depends on ASOC_SAMSUNG && ARCH_S3C2410 - select SND_S3C24XX_I2S - select SND_SOC_L3 - select SND_SOC_UDA134X - -config ASOC_SAMSUNG_SIMTEC - tristate - help - Internal node for common S3C24XX/Simtec suppor - -config ASOC_SAMSUNG_SIMTEC_TLV320AIC23 - tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" - depends on ASOC_SAMSUNG && ARCH_S3C2410 - select SND_S3C24XX_I2S - select SND_SOC_TLV320AIC23 - select ASOC_SAMSUNG_SIMTEC - -config ASOC_SAMSUNG_SIMTEC_HERMES - tristate "SoC I2S Audio support for Simtec Hermes board" - depends on ASOC_SAMSUNG && ARCH_S3C2410 - select SND_S3C24XX_I2S - select SND_SOC_TLV320AIC3X - select ASOC_SAMSUNG_SIMTEC - -config ASOC_SAMSUNG_RX1950_UDA1380 - tristate "Audio support for the HP iPAQ RX1950" - depends on ASOC_SAMSUNG && MACH_RX1950 - select SND_S3C24XX_I2S - select SND_SOC_UDA1380 - help - This driver provides audio support for HP iPAQ RX1950 PDA. - -config ASOC_SAMSUNG_SMDK_WM9713 - tristate "SoC AC97 Audio support for SMDK with WM9713" - depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) - select SND_SOC_WM9713 - select SND_SAMSUNG_AC97 - help - Sat Y if you want to add support for SoC audio on the SMDK. - -config ASOC_SMARTQ - tristate "SoC I2S Audio support for SmartQ board" - depends on ASOC_SAMSUNG && MACH_SMARTQ - select SND_SAMSUNG_I2S - select SND_SOC_WM8750 - -config ASOC_GONI_AQUILA_WM8994 - tristate "SoC I2S Audio support for AQUILA/GONI - WM8994" - depends on ASOC_SAMSUNG && (MACH_GONI || MACH_AQUILA) - select SND_SAMSUNG_I2S - select SND_SOC_WM8994 - help - Say Y if you want to add support for SoC audio on goni or aquila - with the WM8994. - -config ASOC_SAMSUNG_SMDK_SPDIF - tristate "SoC S/PDIF Audio support for SMDK" - depends on SND_S3C24XX_SOC && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210) - select SND_SAMSUNG_SPDIF - help - Say Y if you want to add support for SoC S/PDIF audio on the SMDK. diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile deleted file mode 100644 index 0d24f95..0000000 --- a/sound/soc/s3c24xx/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# S3c24XX Platform Support -snd-soc-s3c24xx-objs := dma.o -snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o -snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o -snd-soc-ac97-objs := ac97.o -snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o -snd-soc-samsung-spdif-objs := spdif.o -snd-soc-pcm-objs := pcm.o -snd-soc-i2s-objs := i2s.o - -obj-$(CONFIG_ASOC_SAMSUNG) += snd-soc-s3c24xx.o -obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o -obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o -obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o -obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o -obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o -obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o -obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o - -# S3C24XX Machine Support -snd-soc-jive-wm8750-objs := jive_wm8750.o -snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o -snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o -snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o -snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o -snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o -snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o -snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o -snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o -snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o -snd-soc-smdk-wm8580-objs := smdk_wm8580.o -snd-soc-smdk-wm9713-objs := smdk_wm9713.o -snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o -snd-soc-goni-wm8994-objs := goni_wm8994.o -snd-soc-smdk-spdif-objs := smdk_spdif.o - -obj-$(CONFIG_ASOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o -obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o -obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o -obj-$(CONFIG_ASOC_SAMSUNG_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o -obj-$(CONFIG_ASOC_SAMSUNG_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o -obj-$(CONFIG_ASOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o -obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o -obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o -obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o -obj-$(CONFIG_ASOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o -obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o -obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o -obj-$(CONFIG_ASOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o -obj-$(CONFIG_ASOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o -obj-$(CONFIG_ASOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o diff --git a/sound/soc/s3c24xx/ac97.c b/sound/soc/s3c24xx/ac97.c deleted file mode 100644 index 4f999d1..0000000 --- a/sound/soc/s3c24xx/ac97.c +++ /dev/null @@ -1,520 +0,0 @@ -/* sound/soc/s3c24xx/ac97.c - * - * ALSA SoC Audio Layer - S3C AC97 Controller driver - * Evolved from s3c2443-ac97.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Author: Jaswinder Singh <jassi.brar(a)samsung.com> - * Credits: Graeme Gregory, Sean Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/clk.h> - -#include <sound/soc.h> - -#include <plat/regs-ac97.h> -#include <mach/dma.h> -#include <plat/audio.h> - -#include "dma.h" -#include "ac97.h" - -#define AC_CMD_ADDR(x) (x << 16) -#define AC_CMD_DATA(x) (x & 0xffff) - -struct s3c_ac97_info { - struct clk *ac97_clk; - void __iomem *regs; - struct mutex lock; - struct completion done; -}; -static struct s3c_ac97_info s3c_ac97; - -static struct s3c2410_dma_client s3c_dma_client_out = { - .name = "AC97 PCMOut" -}; - -static struct s3c2410_dma_client s3c_dma_client_in = { - .name = "AC97 PCMIn" -}; - -static struct s3c2410_dma_client s3c_dma_client_micin = { - .name = "AC97 MicIn" -}; - -static struct s3c_dma_params s3c_ac97_pcm_out = { - .client = &s3c_dma_client_out, - .dma_size = 4, -}; - -static struct s3c_dma_params s3c_ac97_pcm_in = { - .client = &s3c_dma_client_in, - .dma_size = 4, -}; - -static struct s3c_dma_params s3c_ac97_mic_in = { - .client = &s3c_dma_client_micin, - .dma_size = 4, -}; - -static void s3c_ac97_activate(struct snd_ac97 *ac97) -{ - u32 ac_glbctrl, stat; - - stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7; - if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE) - return; /* Return if already active */ - - INIT_COMPLETION(s3c_ac97.done); - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON; - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - msleep(1); - - ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE; - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - msleep(1); - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE; - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - - if (!wait_for_completion_timeout(&s3c_ac97.done, HZ)) - pr_err("AC97: Unable to activate!"); -} - -static unsigned short s3c_ac97_read(struct snd_ac97 *ac97, - unsigned short reg) -{ - u32 ac_glbctrl, ac_codec_cmd; - u32 stat, addr, data; - - mutex_lock(&s3c_ac97.lock); - - s3c_ac97_activate(ac97); - - INIT_COMPLETION(s3c_ac97.done); - - ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD); - ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg); - writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD); - - udelay(50); - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE; - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - - if (!wait_for_completion_timeout(&s3c_ac97.done, HZ)) - pr_err("AC97: Unable to read!"); - - stat = readl(s3c_ac97.regs + S3C_AC97_STAT); - addr = (stat >> 16) & 0x7f; - data = (stat & 0xffff); - - if (addr != reg) - pr_err("ac97: req addr = %02x, rep addr = %02x\n", - reg, addr); - - mutex_unlock(&s3c_ac97.lock); - - return (unsigned short)data; -} - -static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg, - unsigned short val) -{ - u32 ac_glbctrl, ac_codec_cmd; - - mutex_lock(&s3c_ac97.lock); - - s3c_ac97_activate(ac97); - - INIT_COMPLETION(s3c_ac97.done); - - ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD); - ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val); - writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD); - - udelay(50); - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE; - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - - if (!wait_for_completion_timeout(&s3c_ac97.done, HZ)) - pr_err("AC97: Unable to write!"); - - ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD); - ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ; - writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD); - - mutex_unlock(&s3c_ac97.lock); -} - -static void s3c_ac97_cold_reset(struct snd_ac97 *ac97) -{ - pr_debug("AC97: Cold reset\n"); - writel(S3C_AC97_GLBCTRL_COLDRESET, - s3c_ac97.regs + S3C_AC97_GLBCTRL); - msleep(1); - - writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL); - msleep(1); -} - -static void s3c_ac97_warm_reset(struct snd_ac97 *ac97) -{ - u32 stat; - - stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7; - if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE) - return; /* Return if already active */ - - pr_debug("AC97: Warm reset\n"); - - writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL); - msleep(1); - - writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL); - msleep(1); - - s3c_ac97_activate(ac97); -} - -static irqreturn_t s3c_ac97_irq(int irq, void *dev_id) -{ - u32 ac_glbctrl, ac_glbstat; - - ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT); - - if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) { - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE; - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - - complete(&s3c_ac97.done); - } - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - ac_glbctrl |= (1<<30); /* Clear interrupt */ - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - - return IRQ_HANDLED; -} - -struct snd_ac97_bus_ops soc_ac97_ops = { - .read = s3c_ac97_read, - .write = s3c_ac97_write, - .warm_reset = s3c_ac97_warm_reset, - .reset = s3c_ac97_cold_reset, -}; -EXPORT_SYMBOL_GPL(soc_ac97_ops); - -static int s3c_ac97_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct s3c_dma_params *dma_data; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = &s3c_ac97_pcm_out; - else - dma_data = &s3c_ac97_pcm_in; - - snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); - - return 0; -} - -static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) -{ - u32 ac_glbctrl; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct s3c_dma_params *dma_data = - snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK; - else - ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA; - else - ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA; - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - break; - } - - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); - - return 0; -} - -static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - return -ENODEV; - else - snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in); - - return 0; -} - -static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - u32 ac_glbctrl; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct s3c_dma_params *dma_data = - snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - - ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); - ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA; - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - break; - } - - writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); - - return 0; -} - -static struct snd_soc_dai_ops s3c_ac97_dai_ops = { - .hw_params = s3c_ac97_hw_params, - .trigger = s3c_ac97_trigger, -}; - -static struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = { - .hw_params = s3c_ac97_hw_mic_params, - .trigger = s3c_ac97_mic_trigger, -}; - -static struct snd_soc_dai_driver s3c_ac97_dai[] = { - [S3C_AC97_DAI_PCM] = { - .name = "samsung-ac97", - .ac97_control = 1, - .playback = { - .stream_name = "AC97 Playback", - .channels_min = 2, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .capture = { - .stream_name = "AC97 Capture", - .channels_min = 2, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = &s3c_ac97_dai_ops, - }, - [S3C_AC97_DAI_MIC] = { - .name = "samsung-ac97-mic", - .ac97_control = 1, - .capture = { - .stream_name = "AC97 Mic Capture", - .channels_min = 1, - .channels_max = 1, - .rates = SNDRV_PCM_RATE_8000_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = &s3c_ac97_mic_dai_ops, - }, -}; - -static __devinit int s3c_ac97_probe(struct platform_device *pdev) -{ - struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res; - struct s3c_audio_pdata *ac97_pdata; - int ret; - - ac97_pdata = pdev->dev.platform_data; - if (!ac97_pdata || !ac97_pdata->cfg_gpio) { - dev_err(&pdev->dev, "cfg_gpio callback not provided!\n"); - return -EINVAL; - } - - /* Check for availability of necessary resource */ - dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!dmatx_res) { - dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n"); - return -ENXIO; - } - - dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (!dmarx_res) { - dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n"); - return -ENXIO; - } - - dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2); - if (!dmamic_res) { - dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n"); - return -ENXIO; - } - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - dev_err(&pdev->dev, "Unable to get register resource\n"); - return -ENXIO; - } - - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq_res) { - dev_err(&pdev->dev, "AC97 IRQ not provided!\n"); - return -ENXIO; - } - - if (!request_mem_region(mem_res->start, - resource_size(mem_res), "ac97")) { - dev_err(&pdev->dev, "Unable to request register region\n"); - return -EBUSY; - } - - s3c_ac97_pcm_out.channel = dmatx_res->start; - s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA; - s3c_ac97_pcm_in.channel = dmarx_res->start; - s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA; - s3c_ac97_mic_in.channel = dmamic_res->start; - s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA; - - init_completion(&s3c_ac97.done); - mutex_init(&s3c_ac97.lock); - - s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res)); - if (s3c_ac97.regs == NULL) { - dev_err(&pdev->dev, "Unable to ioremap register region\n"); - ret = -ENXIO; - goto err1; - } - - s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97"); - if (IS_ERR(s3c_ac97.ac97_clk)) { - dev_err(&pdev->dev, "ac97 failed to get ac97_clock\n"); - ret = -ENODEV; - goto err2; - } - clk_enable(s3c_ac97.ac97_clk); - - if (ac97_pdata->cfg_gpio(pdev)) { - dev_err(&pdev->dev, "Unable to configure gpio\n"); - ret = -EINVAL; - goto err3; - } - - ret = request_irq(irq_res->start, s3c_ac97_irq, - IRQF_DISABLED, "AC97", NULL); - if (ret < 0) { - dev_err(&pdev->dev, "ac97: interrupt request failed.\n"); - goto err4; - } - - ret = snd_soc_register_dais(&pdev->dev, s3c_ac97_dai, - ARRAY_SIZE(s3c_ac97_dai)); - if (ret) - goto err5; - - return 0; - -err5: - free_irq(irq_res->start, NULL); -err4: -err3: - clk_disable(s3c_ac97.ac97_clk); - clk_put(s3c_ac97.ac97_clk); -err2: - iounmap(s3c_ac97.regs); -err1: - release_mem_region(mem_res->start, resource_size(mem_res)); - - return ret; -} - -static __devexit int s3c_ac97_remove(struct platform_device *pdev) -{ - struct resource *mem_res, *irq_res; - - snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(s3c_ac97_dai)); - - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (irq_res) - free_irq(irq_res->start, NULL); - - clk_disable(s3c_ac97.ac97_clk); - clk_put(s3c_ac97.ac97_clk); - - iounmap(s3c_ac97.regs); - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (mem_res) - release_mem_region(mem_res->start, resource_size(mem_res)); - - return 0; -} - -static struct platform_driver s3c_ac97_driver = { - .probe = s3c_ac97_probe, - .remove = s3c_ac97_remove, - .driver = { - .name = "samsung-ac97", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c_ac97_init(void) -{ - return platform_driver_register(&s3c_ac97_driver); -} -module_init(s3c_ac97_init); - -static void __exit s3c_ac97_exit(void) -{ - platform_driver_unregister(&s3c_ac97_driver); -} -module_exit(s3c_ac97_exit); - -MODULE_AUTHOR("Jaswinder Singh, <jassi.brar(a)samsung.com>"); -MODULE_DESCRIPTION("AC97 driver for the Samsung SoC"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-ac97"); diff --git a/sound/soc/s3c24xx/ac97.h b/sound/soc/s3c24xx/ac97.h deleted file mode 100644 index a8f01b7..0000000 --- a/sound/soc/s3c24xx/ac97.h +++ /dev/null @@ -1,21 +0,0 @@ -/* sound/soc/s3c24xx/ac97.h - * - * ALSA SoC Audio Layer - S3C AC97 Controller driver - * Evolved from s3c2443-ac97.h - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Author: Jaswinder Singh <jassi.brar(a)samsung.com> - * Credits: Graeme Gregory, Sean Choi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S3C_AC97_H_ -#define __S3C_AC97_H_ - -#define S3C_AC97_DAI_PCM 0 -#define S3C_AC97_DAI_MIC 1 - -#endif /* __S3C_AC97_H_ */ diff --git a/sound/soc/s3c24xx/dma.c b/sound/soc/s3c24xx/dma.c deleted file mode 100644 index 12622f3..0000000 --- a/sound/soc/s3c24xx/dma.c +++ /dev/null @@ -1,503 +0,0 @@ -/* - * dma.c -- ALSA Soc Audio Layer - * - * (c) 2006 Wolfson Microelectronics PLC. - * Graeme Gregory graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com - * - * Copyright 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben(a)simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <asm/dma.h> -#include <mach/hardware.h> -#include <mach/dma.h> - -#include "dma.h" - -static const struct snd_pcm_hardware dma_hardware = { - .info = SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_RESUME, - .formats = SNDRV_PCM_FMTBIT_S16_LE | - SNDRV_PCM_FMTBIT_U16_LE | - SNDRV_PCM_FMTBIT_U8 | - SNDRV_PCM_FMTBIT_S8, - .channels_min = 2, - .channels_max = 2, - .buffer_bytes_max = 128*1024, - .period_bytes_min = PAGE_SIZE, - .period_bytes_max = PAGE_SIZE*2, - .periods_min = 2, - .periods_max = 128, - .fifo_size = 32, -}; - -struct runtime_data { - spinlock_t lock; - int state; - unsigned int dma_loaded; - unsigned int dma_limit; - unsigned int dma_period; - dma_addr_t dma_start; - dma_addr_t dma_pos; - dma_addr_t dma_end; - struct s3c_dma_params *params; -}; - -/* dma_enqueue - * - * place a dma buffer onto the queue for the dma system - * to handle. -*/ -static void dma_enqueue(struct snd_pcm_substream *substream) -{ - struct runtime_data *prtd = substream->runtime->private_data; - dma_addr_t pos = prtd->dma_pos; - unsigned int limit; - int ret; - - pr_debug("Entered %s\n", __func__); - - if (s3c_dma_has_circular()) - limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; - else - limit = prtd->dma_limit; - - pr_debug("%s: loaded %d, limit %d\n", - __func__, prtd->dma_loaded, limit); - - while (prtd->dma_loaded < limit) { - unsigned long len = prtd->dma_period; - - pr_debug("dma_loaded: %d\n", prtd->dma_loaded); - - if ((pos + len) > prtd->dma_end) { - len = prtd->dma_end - pos; - pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n", - __func__, len); - } - - ret = s3c2410_dma_enqueue(prtd->params->channel, - substream, pos, len); - - if (ret == 0) { - prtd->dma_loaded++; - pos += prtd->dma_period; - if (pos >= prtd->dma_end) - pos = prtd->dma_start; - } else - break; - } - - prtd->dma_pos = pos; -} - -static void audio_buffdone(struct s3c2410_dma_chan *channel, - void *dev_id, int size, - enum s3c2410_dma_buffresult result) -{ - struct snd_pcm_substream *substream = dev_id; - struct runtime_data *prtd; - - pr_debug("Entered %s\n", __func__); - - if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR) - return; - - prtd = substream->runtime->private_data; - - if (substream) - snd_pcm_period_elapsed(substream); - - spin_lock(&prtd->lock); - if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) { - prtd->dma_loaded--; - dma_enqueue(substream); - } - - spin_unlock(&prtd->lock); -} - -static int dma_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - unsigned long totbytes = params_buffer_bytes(params); - struct s3c_dma_params *dma = - snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - int ret = 0; - - - pr_debug("Entered %s\n", __func__); - - /* return if this is a bufferless transfer e.g. - * codec <--> BT codec or GSM modem -- lg FIXME */ - if (!dma) - return 0; - - /* this may get called several times by oss emulation - * with different params -HW */ - if (prtd->params == NULL) { - /* prepare DMA */ - prtd->params = dma; - - pr_debug("params %p, client %p, channel %d\n", prtd->params, - prtd->params->client, prtd->params->channel); - - ret = s3c2410_dma_request(prtd->params->channel, - prtd->params->client, NULL); - - if (ret < 0) { - printk(KERN_ERR "failed to get dma channel\n"); - return ret; - } - - /* use the circular buffering if we have it available. */ - if (s3c_dma_has_circular()) - s3c2410_dma_setflags(prtd->params->channel, - S3C2410_DMAF_CIRCULAR); - } - - s3c2410_dma_set_buffdone_fn(prtd->params->channel, - audio_buffdone); - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - - runtime->dma_bytes = totbytes; - - spin_lock_irq(&prtd->lock); - prtd->dma_loaded = 0; - prtd->dma_limit = runtime->hw.periods_min; - prtd->dma_period = params_period_bytes(params); - prtd->dma_start = runtime->dma_addr; - prtd->dma_pos = prtd->dma_start; - prtd->dma_end = prtd->dma_start + totbytes; - spin_unlock_irq(&prtd->lock); - - return 0; -} - -static int dma_hw_free(struct snd_pcm_substream *substream) -{ - struct runtime_data *prtd = substream->runtime->private_data; - - pr_debug("Entered %s\n", __func__); - - /* TODO - do we need to ensure DMA flushed */ - snd_pcm_set_runtime_buffer(substream, NULL); - - if (prtd->params) { - s3c2410_dma_free(prtd->params->channel, prtd->params->client); - prtd->params = NULL; - } - - return 0; -} - -static int dma_prepare(struct snd_pcm_substream *substream) -{ - struct runtime_data *prtd = substream->runtime->private_data; - int ret = 0; - - pr_debug("Entered %s\n", __func__); - - /* return if this is a bufferless transfer e.g. - * codec <--> BT codec or GSM modem -- lg FIXME */ - if (!prtd->params) - return 0; - - /* channel needs configuring for mem=>device, increment memory addr, - * sync to pclk, half-word transfers to the IIS-FIFO. */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_MEM, - prtd->params->dma_addr); - } else { - s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_HW, - prtd->params->dma_addr); - } - - s3c2410_dma_config(prtd->params->channel, - prtd->params->dma_size); - - /* flush the DMA channel */ - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH); - prtd->dma_loaded = 0; - prtd->dma_pos = prtd->dma_start; - - /* enqueue dma buffers */ - dma_enqueue(substream); - - return ret; -} - -static int dma_trigger(struct snd_pcm_substream *substream, int cmd) -{ - struct runtime_data *prtd = substream->runtime->private_data; - int ret = 0; - - pr_debug("Entered %s\n", __func__); - - spin_lock(&prtd->lock); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - prtd->state |= ST_RUNNING; - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START); - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - prtd->state &= ~ST_RUNNING; - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP); - break; - - default: - ret = -EINVAL; - break; - } - - spin_unlock(&prtd->lock); - - return ret; -} - -static snd_pcm_uframes_t -dma_pointer(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct runtime_data *prtd = runtime->private_data; - unsigned long res; - dma_addr_t src, dst; - - pr_debug("Entered %s\n", __func__); - - spin_lock(&prtd->lock); - s3c2410_dma_getposition(prtd->params->channel, &src, &dst); - - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - res = dst - prtd->dma_start; - else - res = src - prtd->dma_start; - - spin_unlock(&prtd->lock); - - pr_debug("Pointer %x %x\n", src, dst); - - /* we seem to be getting the odd error from the pcm library due - * to out-of-bounds pointers. this is maybe due to the dma engine - * not having loaded the new values for the channel before being - * callled... (todo - fix ) - */ - - if (res >= snd_pcm_lib_buffer_bytes(substream)) { - if (res == snd_pcm_lib_buffer_bytes(substream)) - res = 0; - } - - return bytes_to_frames(substream->runtime, res); -} - -static int dma_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct runtime_data *prtd; - - pr_debug("Entered %s\n", __func__); - - snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); - snd_soc_set_runtime_hwparams(substream, &dma_hardware); - - prtd = kzalloc(sizeof(struct runtime_data), GFP_KERNEL); - if (prtd == NULL) - return -ENOMEM; - - spin_lock_init(&prtd->lock); - - runtime->private_data = prtd; - return 0; -} - -static int dma_close(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct runtime_data *prtd = runtime->private_data; - - pr_debug("Entered %s\n", __func__); - - if (!prtd) - pr_debug("dma_close called with prtd == NULL\n"); - - kfree(prtd); - - return 0; -} - -static int dma_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - - pr_debug("Entered %s\n", __func__); - - return dma_mmap_writecombine(substream->pcm->card->dev, vma, - runtime->dma_area, - runtime->dma_addr, - runtime->dma_bytes); -} - -static struct snd_pcm_ops dma_ops = { - .open = dma_open, - .close = dma_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = dma_hw_params, - .hw_free = dma_hw_free, - .prepare = dma_prepare, - .trigger = dma_trigger, - .pointer = dma_pointer, - .mmap = dma_mmap, -}; - -static int preallocate_dma_buffer(struct snd_pcm *pcm, int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *buf = &substream->dma_buffer; - size_t size = dma_hardware.buffer_bytes_max; - - pr_debug("Entered %s\n", __func__); - - buf->dev.type = SNDRV_DMA_TYPE_DEV; - buf->dev.dev = pcm->card->dev; - buf->private_data = NULL; - buf->area = dma_alloc_writecombine(pcm->card->dev, size, - &buf->addr, GFP_KERNEL); - if (!buf->area) - return -ENOMEM; - buf->bytes = size; - return 0; -} - -static void dma_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - pr_debug("Entered %s\n", __func__); - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (!substream) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - - dma_free_writecombine(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - -static u64 dma_mask = DMA_BIT_MASK(32); - -static int dma_new(struct snd_card *card, - struct snd_soc_dai *dai, struct snd_pcm *pcm) -{ - int ret = 0; - - pr_debug("Entered %s\n", __func__); - - if (!card->dev->dma_mask) - card->dev->dma_mask = &dma_mask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->driver->playback.channels_min) { - ret = preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->driver->capture.channels_min) { - ret = preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } -out: - return ret; -} - -static struct snd_soc_platform_driver samsung_asoc_platform = { - .ops = &dma_ops, - .pcm_new = dma_new, - .pcm_free = dma_free_dma_buffers, -}; - -static int __devinit samsung_asoc_platform_probe(struct platform_device *pdev) -{ - return snd_soc_register_platform(&pdev->dev, &samsung_asoc_platform); -} - -static int __devexit samsung_asoc_platform_remove(struct platform_device *pdev) -{ - snd_soc_unregister_platform(&pdev->dev); - return 0; -} - -static struct platform_driver asoc_dma_driver = { - .driver = { - .name = "samsung-audio", - .owner = THIS_MODULE, - }, - - .probe = samsung_asoc_platform_probe, - .remove = __devexit_p(samsung_asoc_platform_remove), -}; - -static int __init samsung_asoc_init(void) -{ - return platform_driver_register(&asoc_dma_driver); -} -module_init(samsung_asoc_init); - -static void __exit samsung_asoc_exit(void) -{ - platform_driver_unregister(&asoc_dma_driver); -} -module_exit(samsung_asoc_exit); - -MODULE_AUTHOR("Ben Dooks, <ben(a)simtec.co.uk>"); -MODULE_DESCRIPTION("Samsung ASoC DMA Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-audio"); diff --git a/sound/soc/s3c24xx/dma.h b/sound/soc/s3c24xx/dma.h deleted file mode 100644 index f8cd2b4..0000000 --- a/sound/soc/s3c24xx/dma.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * dma.h -- - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * ALSA PCM interface for the Samsung S3C24xx CPU - */ - -#ifndef _S3C_AUDIO_H -#define _S3C_AUDIO_H - -#define ST_RUNNING (1<<0) -#define ST_OPENED (1<<1) - -struct s3c_dma_params { - struct s3c2410_dma_client *client; /* stream identifier */ - int channel; /* Channel ID */ - dma_addr_t dma_addr; - int dma_size; /* Size of the DMA transfer */ -}; - -#define S3C24XX_DAI_I2S 0 - -/* platform data */ -extern struct snd_ac97_bus_ops s3c24xx_ac97_ops; - -#endif diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/s3c24xx/goni_wm8994.c deleted file mode 100644 index dcaf7c3..0000000 --- a/sound/soc/s3c24xx/goni_wm8994.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * goni_wm8994.c - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Chanwoo Choi <cw00.choi(a)samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> -#include <sound/jack.h> -#include <asm/mach-types.h> -#include <mach/gpio.h> -#include <mach/regs-clock.h> - -#include <linux/mfd/wm8994/core.h> -#include <linux/mfd/wm8994/registers.h> -#include "../codecs/wm8994.h" -#include "dma.h" -#include "i2s.h" - -#define MACHINE_NAME 0 -#define CPU_VOICE_DAI 1 - -static const char *aquila_str[] = { - [MACHINE_NAME] = "aquila", - [CPU_VOICE_DAI] = "aquila-voice-dai", -}; - -static struct snd_soc_card goni; -static struct platform_device *goni_snd_device; - -/* 3.5 pie jack */ -static struct snd_soc_jack jack; - -/* 3.5 pie jack detection DAPM pins */ -static struct snd_soc_jack_pin jack_pins[] = { - { - .pin = "Headset Mic", - .mask = SND_JACK_MICROPHONE, - }, { - .pin = "Headset Stereophone", - .mask = SND_JACK_HEADPHONE | SND_JACK_MECHANICAL | - SND_JACK_AVOUT, - }, -}; - -/* 3.5 pie jack detection gpios */ -static struct snd_soc_jack_gpio jack_gpios[] = { - { - .gpio = S5PV210_GPH0(6), - .name = "DET_3.5", - .report = SND_JACK_HEADSET | SND_JACK_MECHANICAL | - SND_JACK_AVOUT, - .debounce_time = 200, - }, -}; - -static const struct snd_soc_dapm_widget goni_dapm_widgets[] = { - SND_SOC_DAPM_SPK("Ext Left Spk", NULL), - SND_SOC_DAPM_SPK("Ext Right Spk", NULL), - SND_SOC_DAPM_SPK("Ext Rcv", NULL), - SND_SOC_DAPM_HP("Headset Stereophone", NULL), - SND_SOC_DAPM_MIC("Headset Mic", NULL), - SND_SOC_DAPM_MIC("Main Mic", NULL), - SND_SOC_DAPM_MIC("2nd Mic", NULL), - SND_SOC_DAPM_LINE("Radio In", NULL), -}; - -static const struct snd_soc_dapm_route goni_dapm_routes[] = { - {"Ext Left Spk", NULL, "SPKOUTLP"}, - {"Ext Left Spk", NULL, "SPKOUTLN"}, - - {"Ext Right Spk", NULL, "SPKOUTRP"}, - {"Ext Right Spk", NULL, "SPKOUTRN"}, - - {"Ext Rcv", NULL, "HPOUT2N"}, - {"Ext Rcv", NULL, "HPOUT2P"}, - - {"Headset Stereophone", NULL, "HPOUT1L"}, - {"Headset Stereophone", NULL, "HPOUT1R"}, - - {"IN1RN", NULL, "Headset Mic"}, - {"IN1RP", NULL, "Headset Mic"}, - - {"IN1RN", NULL, "2nd Mic"}, - {"IN1RP", NULL, "2nd Mic"}, - - {"IN1LN", NULL, "Main Mic"}, - {"IN1LP", NULL, "Main Mic"}, - - {"IN2LN", NULL, "Radio In"}, - {"IN2RN", NULL, "Radio In"}, -}; - -static int goni_wm8994_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - int ret; - - /* add goni specific widgets */ - snd_soc_dapm_new_controls(codec, goni_dapm_widgets, - ARRAY_SIZE(goni_dapm_widgets)); - - /* set up goni specific audio routes */ - snd_soc_dapm_add_routes(codec, goni_dapm_routes, - ARRAY_SIZE(goni_dapm_routes)); - - /* set endpoints to not connected */ - snd_soc_dapm_nc_pin(codec, "IN2LP:VXRN"); - snd_soc_dapm_nc_pin(codec, "IN2RP:VXRP"); - snd_soc_dapm_nc_pin(codec, "LINEOUT1N"); - snd_soc_dapm_nc_pin(codec, "LINEOUT1P"); - snd_soc_dapm_nc_pin(codec, "LINEOUT2N"); - snd_soc_dapm_nc_pin(codec, "LINEOUT2P"); - - if (machine_is_aquila()) { - snd_soc_dapm_nc_pin(codec, "SPKOUTRN"); - snd_soc_dapm_nc_pin(codec, "SPKOUTRP"); - } - - snd_soc_dapm_sync(codec); - - /* Headset jack detection */ - ret = snd_soc_jack_new(&goni, "Headset Jack", - SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT, - &jack); - if (ret) - return ret; - - ret = snd_soc_jack_add_pins(&jack, ARRAY_SIZE(jack_pins), jack_pins); - if (ret) - return ret; - - ret = snd_soc_jack_add_gpios(&jack, ARRAY_SIZE(jack_gpios), jack_gpios); - if (ret) - return ret; - - return 0; -} - -static int goni_hifi_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned int pll_out = 24000000; - int ret = 0; - - /* set the cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set the codec FLL */ - ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, 0, pll_out, - params_rate(params) * 256); - if (ret < 0) - return ret; - - /* set the codec system clock */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1, - params_rate(params) * 256, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - return 0; -} - -static struct snd_soc_ops goni_hifi_ops = { - .hw_params = goni_hifi_hw_params, -}; - -static int goni_voice_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - unsigned int pll_out = 24000000; - int ret = 0; - - if (params_rate(params) != 8000) - return -EINVAL; - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J | - SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set the codec FLL */ - ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL2, 0, pll_out, - params_rate(params) * 256); - if (ret < 0) - return ret; - - /* set the codec system clock */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL2, - params_rate(params) * 256, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - return 0; -} - -static struct snd_soc_dai_driver voice_dai = { - .name = "goni-voice-dai", - .id = 0, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, -}; - -static struct snd_soc_ops goni_voice_ops = { - .hw_params = goni_voice_hw_params, -}; - -static struct snd_soc_dai_link goni_dai[] = { -{ - .name = "WM8994", - .stream_name = "WM8994 HiFi", - .cpu_dai_name = "samsung-i2s.0", - .codec_dai_name = "wm8994-hifi", - .platform_name = "samsung-audio", - .codec_name = "wm8994-codec.0-0x1a", - .init = goni_wm8994_init, - .ops = &goni_hifi_ops, -}, { - .name = "WM8994 Voice", - .stream_name = "Voice", - .cpu_dai_name = "goni-voice-dai", - .codec_dai_name = "wm8994-voice", - .platform_name = "samsung-audio", - .codec_name = "wm8994-codec.0-0x1a", - .ops = &goni_voice_ops, -}, -}; - -static struct snd_soc_card goni = { - .name = "goni", - .dai_link = goni_dai, - .num_links = ARRAY_SIZE(goni_dai), -}; - -static int __init goni_init(void) -{ - int ret; - - if (machine_is_aquila()) { - voice_dai.name = aquila_str[CPU_VOICE_DAI]; - goni_dai[1].cpu_dai_name = aquila_str[CPU_VOICE_DAI]; - goni.name = aquila_str[MACHINE_NAME]; - } else if (!machine_is_goni()) - return -ENODEV; - - goni_snd_device = platform_device_alloc("soc-audio", -1); - if (!goni_snd_device) - return -ENOMEM; - - /* register voice DAI here */ - ret = snd_soc_register_dai(&goni_snd_device->dev, &voice_dai); - if (ret) - return ret; - - platform_set_drvdata(goni_snd_device, &goni); - ret = platform_device_add(goni_snd_device); - - if (ret) - platform_device_put(goni_snd_device); - - return ret; -} - -static void __exit goni_exit(void) -{ - platform_device_unregister(goni_snd_device); -} - -module_init(goni_init); -module_exit(goni_exit); - -/* Module information */ -MODULE_DESCRIPTION("ALSA SoC WM8994 GONI(S5PV210)"); -MODULE_AUTHOR("Chanwoo Choi <cw00.choi(a)samsung.com>"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/i2s.c b/sound/soc/s3c24xx/i2s.c deleted file mode 100644 index 6869f51..0000000 --- a/sound/soc/s3c24xx/i2s.c +++ /dev/null @@ -1,1251 +0,0 @@ -/* sound/soc/s3c24xx/i2s.c - * - * ALSA SoC Audio Layer - Samsung I2S Controller driver - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar(a)samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <plat/audio.h> - -#include "dma.h" -#include "i2s.h" - -#define I2SCON 0x0 -#define I2SMOD 0x4 -#define I2SFIC 0x8 -#define I2SPSR 0xc -#define I2STXD 0x10 -#define I2SRXD 0x14 -#define I2SFICS 0x18 -#define I2STXDS 0x1c - -#define CON_RSTCLR (1 << 31) -#define CON_FRXOFSTATUS (1 << 26) -#define CON_FRXORINTEN (1 << 25) -#define CON_FTXSURSTAT (1 << 24) -#define CON_FTXSURINTEN (1 << 23) -#define CON_TXSDMA_PAUSE (1 << 20) -#define CON_TXSDMA_ACTIVE (1 << 18) - -#define CON_FTXURSTATUS (1 << 17) -#define CON_FTXURINTEN (1 << 16) -#define CON_TXFIFO2_EMPTY (1 << 15) -#define CON_TXFIFO1_EMPTY (1 << 14) -#define CON_TXFIFO2_FULL (1 << 13) -#define CON_TXFIFO1_FULL (1 << 12) - -#define CON_LRINDEX (1 << 11) -#define CON_TXFIFO_EMPTY (1 << 10) -#define CON_RXFIFO_EMPTY (1 << 9) -#define CON_TXFIFO_FULL (1 << 8) -#define CON_RXFIFO_FULL (1 << 7) -#define CON_TXDMA_PAUSE (1 << 6) -#define CON_RXDMA_PAUSE (1 << 5) -#define CON_TXCH_PAUSE (1 << 4) -#define CON_RXCH_PAUSE (1 << 3) -#define CON_TXDMA_ACTIVE (1 << 2) -#define CON_RXDMA_ACTIVE (1 << 1) -#define CON_ACTIVE (1 << 0) - -#define MOD_OPCLK_CDCLK_OUT (0 << 30) -#define MOD_OPCLK_CDCLK_IN (1 << 30) -#define MOD_OPCLK_BCLK_OUT (2 << 30) -#define MOD_OPCLK_PCLK (3 << 30) -#define MOD_OPCLK_MASK (3 << 30) -#define MOD_TXS_IDMA (1 << 28) /* Sec_TXFIFO use I-DMA */ - -#define MOD_BLCS_SHIFT 26 -#define MOD_BLCS_16BIT (0 << MOD_BLCS_SHIFT) -#define MOD_BLCS_8BIT (1 << MOD_BLCS_SHIFT) -#define MOD_BLCS_24BIT (2 << MOD_BLCS_SHIFT) -#define MOD_BLCS_MASK (3 << MOD_BLCS_SHIFT) -#define MOD_BLCP_SHIFT 24 -#define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) -#define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) -#define MOD_BLCP_24BIT (2 << MOD_BLCP_SHIFT) -#define MOD_BLCP_MASK (3 << MOD_BLCP_SHIFT) - -#define MOD_C2DD_HHALF (1 << 21) /* Discard Higher-half */ -#define MOD_C2DD_LHALF (1 << 20) /* Discard Lower-half */ -#define MOD_C1DD_HHALF (1 << 19) -#define MOD_C1DD_LHALF (1 << 18) -#define MOD_DC2_EN (1 << 17) -#define MOD_DC1_EN (1 << 16) -#define MOD_BLC_16BIT (0 << 13) -#define MOD_BLC_8BIT (1 << 13) -#define MOD_BLC_24BIT (2 << 13) -#define MOD_BLC_MASK (3 << 13) - -#define MOD_IMS_SYSMUX (1 << 10) -#define MOD_SLAVE (1 << 11) -#define MOD_TXONLY (0 << 8) -#define MOD_RXONLY (1 << 8) -#define MOD_TXRX (2 << 8) -#define MOD_MASK (3 << 8) -#define MOD_LR_LLOW (0 << 7) -#define MOD_LR_RLOW (1 << 7) -#define MOD_SDF_IIS (0 << 5) -#define MOD_SDF_MSB (1 << 5) -#define MOD_SDF_LSB (2 << 5) -#define MOD_SDF_MASK (3 << 5) -#define MOD_RCLK_256FS (0 << 3) -#define MOD_RCLK_512FS (1 << 3) -#define MOD_RCLK_384FS (2 << 3) -#define MOD_RCLK_768FS (3 << 3) -#define MOD_RCLK_MASK (3 << 3) -#define MOD_BCLK_32FS (0 << 1) -#define MOD_BCLK_48FS (1 << 1) -#define MOD_BCLK_16FS (2 << 1) -#define MOD_BCLK_24FS (3 << 1) -#define MOD_BCLK_MASK (3 << 1) -#define MOD_8BIT (1 << 0) - -#define MOD_CDCLKCON (1 << 12) - -#define PSR_PSREN (1 << 15) - -#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf) -#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf) - -#define FIC_TXFLUSH (1 << 15) -#define FIC_RXFLUSH (1 << 7) -#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf) -#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf) -#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f) - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) - -struct i2s_dai { - /* Platform device for this DAI */ - struct platform_device *pdev; - /* IOREMAP'd SFRs */ - void __iomem *addr; - /* Physical base address of SFRs */ - u32 base; - /* Rate of RCLK source clock */ - unsigned long rclk_srcrate; - /* Frame Clock */ - unsigned frmclk; - /* - * Specifically requested RCLK,BCLK by MACHINE Driver. - * 0 indicates CPU driver is free to choose any value. - */ - unsigned rfs, bfs; - /* I2S Controller's core clock */ - struct clk *clk; - /* Clock for generating I2S signals */ - struct clk *op_clk; - /* Array of clock names for op_clk */ - const char **src_clk; - /* Pointer to the Primary_Fifo if this is Sec_Fifo, NULL otherwise */ - struct i2s_dai *pri_dai; - /* Pointer to the Secondary_Fifo if it has one, NULL otherwise */ - struct i2s_dai *sec_dai; -#define DAI_OPENED (1 << 0) /* Dai is opened */ -#define DAI_MANAGER (1 << 1) /* Dai is the manager */ - unsigned mode; - /* Driver for this DAI */ - struct snd_soc_dai_driver s3c_i2s_drv; - /* DMA parameters */ - struct s3c_dma_params dma_playback; - struct s3c_dma_params dma_capture; - u32 quirks; - u32 suspend_i2smod; - u32 suspend_i2scon; - u32 suspend_i2spsr; -}; - -/* Lock for cross i/f checks */ -static DEFINE_SPINLOCK(lock); - -/* If this is the 'overlay' stereo DAI */ -static inline bool is_secondary(struct i2s_dai *i2s) -{ - return i2s->pri_dai ? true : false; -} - -/* If operating in SoC-Slave mode */ -static inline bool is_slave(struct i2s_dai *i2s) -{ - return (readl(i2s->addr + I2SMOD) & MOD_SLAVE) ? true : false; -} - -/* If this interface of the controller is transmitting data */ -static inline bool tx_active(struct i2s_dai *i2s) -{ - u32 active; - - if (!i2s) - return false; - - active = readl(i2s->addr + I2SMOD); - - if (is_secondary(i2s)) - active &= CON_TXSDMA_ACTIVE; - else - active &= CON_TXDMA_ACTIVE; - - return active ? true : false; -} - -/* If the other interface of the controller is transmitting data */ -static inline bool other_tx_active(struct i2s_dai *i2s) -{ - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - - return tx_active(other); -} - -/* If any interface of the controller is transmitting data */ -static inline bool any_tx_active(struct i2s_dai *i2s) -{ - return tx_active(i2s) || other_tx_active(i2s); -} - -/* If this interface of the controller is receiving data */ -static inline bool rx_active(struct i2s_dai *i2s) -{ - u32 active; - - if (!i2s) - return false; - - active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE; - - return active ? true : false; -} - -/* If the other interface of the controller is receiving data */ -static inline bool other_rx_active(struct i2s_dai *i2s) -{ - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - - return rx_active(other); -} - -/* If any interface of the controller is receiving data */ -static inline bool any_rx_active(struct i2s_dai *i2s) -{ - return rx_active(i2s) || other_rx_active(i2s); -} - -/* If the other DAI is transmitting or receiving data */ -static inline bool other_active(struct i2s_dai *i2s) -{ - return other_rx_active(i2s) || other_tx_active(i2s); -} - -/* If this DAI is transmitting or receiving data */ -static inline bool this_active(struct i2s_dai *i2s) -{ - return tx_active(i2s) || rx_active(i2s); -} - -/* If the controller is active anyway */ -static inline bool any_active(struct i2s_dai *i2s) -{ - return this_active(i2s) || other_active(i2s); -} - -static inline struct i2s_dai *to_info(struct snd_soc_dai *dai) -{ - return snd_soc_dai_get_drvdata(dai); -} - -static inline bool is_opened(struct i2s_dai *i2s) -{ - if (i2s && (i2s->mode & DAI_OPENED)) - return true; - else - return false; -} - -static inline bool is_manager(struct i2s_dai *i2s) -{ - if (is_opened(i2s) && (i2s->mode & DAI_MANAGER)) - return true; - else - return false; -} - -/* Read RCLK of I2S (in multiples of LRCLK) */ -static inline unsigned get_rfs(struct i2s_dai *i2s) -{ - u32 rfs = (readl(i2s->addr + I2SMOD) >> 3) & 0x3; - - switch (rfs) { - case 3: return 768; - case 2: return 384; - case 1: return 512; - default: return 256; - } -} - -/* Write RCLK of I2S (in multiples of LRCLK) */ -static inline void set_rfs(struct i2s_dai *i2s, unsigned rfs) -{ - u32 mod = readl(i2s->addr + I2SMOD); - - mod &= ~MOD_RCLK_MASK; - - switch (rfs) { - case 768: - mod |= MOD_RCLK_768FS; - break; - case 512: - mod |= MOD_RCLK_512FS; - break; - case 384: - mod |= MOD_RCLK_384FS; - break; - default: - mod |= MOD_RCLK_256FS; - break; - } - - writel(mod, i2s->addr + I2SMOD); -} - -/* Read Bit-Clock of I2S (in multiples of LRCLK) */ -static inline unsigned get_bfs(struct i2s_dai *i2s) -{ - u32 bfs = (readl(i2s->addr + I2SMOD) >> 1) & 0x3; - - switch (bfs) { - case 3: return 24; - case 2: return 16; - case 1: return 48; - default: return 32; - } -} - -/* Write Bit-Clock of I2S (in multiples of LRCLK) */ -static inline void set_bfs(struct i2s_dai *i2s, unsigned bfs) -{ - u32 mod = readl(i2s->addr + I2SMOD); - - mod &= ~MOD_BCLK_MASK; - - switch (bfs) { - case 48: - mod |= MOD_BCLK_48FS; - break; - case 32: - mod |= MOD_BCLK_32FS; - break; - case 24: - mod |= MOD_BCLK_24FS; - break; - default: - mod |= MOD_BCLK_16FS; - break; - } - - writel(mod, i2s->addr + I2SMOD); -} - -/* Sample-Size */ -static inline int get_blc(struct i2s_dai *i2s) -{ - int blc = readl(i2s->addr + I2SMOD); - - blc = (blc >> 13) & 0x3; - - switch (blc) { - case 2: return 24; - case 1: return 8; - default: return 16; - } -} - -/* TX Channel Control */ -static void s3c_i2sv2_txctrl(struct i2s_dai *i2s, int on) -{ - void __iomem *addr = i2s->addr; - u32 con = readl(addr + I2SCON); - u32 mod = readl(addr + I2SMOD) & ~MOD_MASK; - - if (on) { - con |= CON_ACTIVE; - con &= ~CON_TXCH_PAUSE; - - if (is_secondary(i2s)) { - con |= CON_TXSDMA_ACTIVE; - con &= ~CON_TXSDMA_PAUSE; - } else { - con |= CON_TXDMA_ACTIVE; - con &= ~CON_TXDMA_PAUSE; - } - - if (any_rx_active(i2s)) - mod |= MOD_TXRX; - else - mod |= MOD_TXONLY; - } else { - if (is_secondary(i2s)) { - con |= CON_TXSDMA_PAUSE; - con &= ~CON_TXSDMA_ACTIVE; - } else { - con |= CON_TXDMA_PAUSE; - con &= ~CON_TXDMA_ACTIVE; - } - - if (other_tx_active(i2s)) { - writel(con, addr + I2SCON); - return; - } - - con |= CON_TXCH_PAUSE; - - if (any_rx_active(i2s)) - mod |= MOD_RXONLY; - else - con &= ~CON_ACTIVE; - } - - writel(mod, addr + I2SMOD); - writel(con, addr + I2SCON); -} - -/* RX Channel Control */ -static void s3c_i2sv2_rxctrl(struct i2s_dai *i2s, int on) -{ - void __iomem *addr = i2s->addr; - u32 con = readl(addr + I2SCON); - u32 mod = readl(addr + I2SMOD) & ~MOD_MASK; - - if (on) { - con |= CON_RXDMA_ACTIVE | CON_ACTIVE; - con &= ~(CON_RXDMA_PAUSE | CON_RXCH_PAUSE); - - if (any_tx_active(i2s)) - mod |= MOD_TXRX; - else - mod |= MOD_RXONLY; - } else { - con |= CON_RXDMA_PAUSE | CON_RXCH_PAUSE; - con &= ~CON_RXDMA_ACTIVE; - - if (any_tx_active(i2s)) - mod |= MOD_TXONLY; - else - con &= ~CON_ACTIVE; - } - - writel(mod, addr + I2SMOD); - writel(con, addr + I2SCON); -} - -/* Flush FIFO of an interface */ -static inline void s3c_i2sv2_fifo(struct i2s_dai *i2s, u32 flush) -{ - void __iomem *fic; - u32 val; - - if (!i2s) - return; - - if (is_secondary(i2s)) - fic = i2s->addr + I2SFICS; - else - fic = i2s->addr + I2SFIC; - - /* Flush the FIFO */ - writel(readl(fic) | flush, fic); - - /* Be patient */ - val = msecs_to_loops(1) / 1000; /* 1 usec */ - while (--val) - cpu_relax(); - - writel(readl(fic) & ~flush, fic); -} - -static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *dai, - int clk_id, unsigned int rfs, int dir) -{ - struct i2s_dai *i2s = to_info(dai); - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - u32 mod = readl(i2s->addr + I2SMOD); - - switch (clk_id) { - case SAMSUNG_I2S_CDCLK: - /* Shouldn't matter in GATING(CLOCK_IN) mode */ - if (dir == SND_SOC_CLOCK_IN) - rfs = 0; - - if ((rfs && other->rfs && (other->rfs != rfs)) || - (any_active(i2s) && - (((dir == SND_SOC_CLOCK_IN) - && !(mod & MOD_CDCLKCON)) || - ((dir == SND_SOC_CLOCK_OUT) - && (mod & MOD_CDCLKCON))))) { - dev_err(&i2s->pdev->dev, - "%s:%d Other DAI busy\n", __func__, __LINE__); - return -EAGAIN; - } - - if (dir == SND_SOC_CLOCK_IN) - mod |= MOD_CDCLKCON; - else - mod &= ~MOD_CDCLKCON; - - i2s->rfs = rfs; - break; - - case SAMSUNG_I2S_RCLKSRC_0: /* clock corrsponding to IISMOD[10] := 0 */ - case SAMSUNG_I2S_RCLKSRC_1: /* clock corrsponding to IISMOD[10] := 1 */ - if ((i2s->quirks & QUIRK_NO_MUXPSR) - || (clk_id == SAMSUNG_I2S_RCLKSRC_0)) - clk_id = 0; - else - clk_id = 1; - - if (!any_active(i2s)) { - if (i2s->op_clk) { - if ((clk_id && !(mod & MOD_IMS_SYSMUX)) || - (!clk_id && (mod & MOD_IMS_SYSMUX))) { - clk_disable(i2s->op_clk); - clk_put(i2s->op_clk); - } else { - return 0; - } - } - - i2s->op_clk = clk_get(&i2s->pdev->dev, - i2s->src_clk[clk_id]); - clk_enable(i2s->op_clk); - i2s->rclk_srcrate = clk_get_rate(i2s->op_clk); - - /* Over-ride the other's */ - if (other) { - other->op_clk = i2s->op_clk; - other->rclk_srcrate = i2s->rclk_srcrate; - } - } else if ((!clk_id && (mod & MOD_IMS_SYSMUX)) - || (clk_id && !(mod & MOD_IMS_SYSMUX))) { - dev_err(&i2s->pdev->dev, - "%s:%d Other DAI busy\n", __func__, __LINE__); - return -EAGAIN; - } else { - /* Call can't be on the active DAI */ - i2s->op_clk = other->op_clk; - i2s->rclk_srcrate = other->rclk_srcrate; - return 0; - } - - if (clk_id == 0) - mod &= ~MOD_IMS_SYSMUX; - else - mod |= MOD_IMS_SYSMUX; - break; - - default: - dev_err(&i2s->pdev->dev, "We don't serve that!\n"); - return -EINVAL; - } - - writel(mod, i2s->addr + I2SMOD); - - return 0; -} - -static int i2sv2_i2s_set_fmt(struct snd_soc_dai *dai, - unsigned int fmt) -{ - struct i2s_dai *i2s = to_info(dai); - u32 mod = readl(i2s->addr + I2SMOD); - u32 tmp = 0; - - /* Format is priority */ - switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_RIGHT_J: - tmp |= MOD_LR_RLOW; - tmp |= MOD_SDF_MSB; - break; - case SND_SOC_DAIFMT_LEFT_J: - tmp |= MOD_LR_RLOW; - tmp |= MOD_SDF_LSB; - break; - case SND_SOC_DAIFMT_I2S: - tmp |= MOD_SDF_IIS; - break; - default: - dev_err(&i2s->pdev->dev, "Format not supported\n"); - return -EINVAL; - } - - /* Allow LRCLK-inverted version of the supported formats */ - switch (fmt & SND_SOC_DAIFMT_INV_MASK) { - case SND_SOC_DAIFMT_NB_NF: - break; - case SND_SOC_DAIFMT_NB_IF: - if (tmp & MOD_LR_RLOW) - tmp &= ~MOD_LR_RLOW; - else - tmp |= MOD_LR_RLOW; - break; - default: - dev_err(&i2s->pdev->dev, "Polarity not supported\n"); - return -EINVAL; - } - - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBM_CFM: - tmp |= MOD_SLAVE; - break; - case SND_SOC_DAIFMT_CBS_CFS: - /* Set default source clock in Master mode */ - if (i2s->rclk_srcrate == 0) - s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0, - 0, SND_SOC_CLOCK_IN); - break; - default: - dev_err(&i2s->pdev->dev, "master/slave format not supported\n"); - return -EINVAL; - } - - if (any_active(i2s) && - ((mod & (MOD_SDF_MASK | MOD_LR_RLOW - | MOD_SLAVE)) != tmp)) { - dev_err(&i2s->pdev->dev, - "%s:%d Other DAI busy\n", __func__, __LINE__); - return -EAGAIN; - } - - mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE); - mod |= tmp; - writel(mod, i2s->addr + I2SMOD); - - return 0; -} - -static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = to_info(dai); - u32 mod = readl(i2s->addr + I2SMOD); - - if (!is_secondary(i2s)) - mod &= ~(MOD_DC2_EN | MOD_DC1_EN); - - switch (params_channels(params)) { - case 6: - mod |= MOD_DC2_EN; - case 4: - mod |= MOD_DC1_EN; - break; - case 2: - break; - default: - dev_err(&i2s->pdev->dev, "%d channels not supported\n", - params_channels(params)); - return -EINVAL; - } - - if (is_secondary(i2s)) - mod &= ~MOD_BLCS_MASK; - else - mod &= ~MOD_BLCP_MASK; - - if (is_manager(i2s)) - mod &= ~MOD_BLC_MASK; - - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - if (is_secondary(i2s)) - mod |= MOD_BLCS_8BIT; - else - mod |= MOD_BLCP_8BIT; - if (is_manager(i2s)) - mod |= MOD_BLC_8BIT; - break; - case SNDRV_PCM_FORMAT_S16_LE: - if (is_secondary(i2s)) - mod |= MOD_BLCS_16BIT; - else - mod |= MOD_BLCP_16BIT; - if (is_manager(i2s)) - mod |= MOD_BLC_16BIT; - break; - case SNDRV_PCM_FORMAT_S24_LE: - if (is_secondary(i2s)) - mod |= MOD_BLCS_24BIT; - else - mod |= MOD_BLCP_24BIT; - if (is_manager(i2s)) - mod |= MOD_BLC_24BIT; - break; - default: - dev_err(&i2s->pdev->dev, "Format(%d) not supported\n", - params_format(params)); - return -EINVAL; - } - writel(mod, i2s->addr + I2SMOD); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - snd_soc_dai_set_dma_data(dai, substream, - (void *)&i2s->dma_playback); - else - snd_soc_dai_set_dma_data(dai, substream, - (void *)&i2s->dma_capture); - - i2s->frmclk = params_rate(params); - - return 0; -} - -/* We set constraints on the substream acc to the version of I2S */ -static int s3c_i2sv2_startup(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = to_info(dai); - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - unsigned long flags; - - spin_lock_irqsave(&lock, flags); - - i2s->mode |= DAI_OPENED; - - if (is_manager(other)) - i2s->mode &= ~DAI_MANAGER; - else - i2s->mode |= DAI_MANAGER; - - /* Enforce set_sysclk in Master mode */ - i2s->rclk_srcrate = 0; - - spin_unlock_irqrestore(&lock, flags); - - return 0; -} - -static void s3c_i2sv2_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = to_info(dai); - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - unsigned long flags; - - spin_lock_irqsave(&lock, flags); - - i2s->mode &= ~DAI_OPENED; - i2s->mode &= ~DAI_MANAGER; - - if (is_opened(other)) - other->mode |= DAI_MANAGER; - - /* Reset any constraint on RFS and BFS */ - i2s->rfs = 0; - i2s->bfs = 0; - - spin_unlock_irqrestore(&lock, flags); - - /* Gate CDCLK by default */ - if (!is_opened(other)) - s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK, - 0, SND_SOC_CLOCK_IN); -} - -static int config_setup(struct i2s_dai *i2s) -{ - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - unsigned rfs, bfs, blc; - u32 psr; - - blc = get_blc(i2s); - - bfs = i2s->bfs; - - if (!bfs && other) - bfs = other->bfs; - - /* Select least possible multiple(2) if no constraint set */ - if (!bfs) - bfs = blc * 2; - - rfs = i2s->rfs; - - if (!rfs && other) - rfs = other->rfs; - - if ((rfs == 256 || rfs == 512) && (blc == 24)) { - dev_err(&i2s->pdev->dev, - "%d-RFS not supported for 24-blc\n", rfs); - return -EINVAL; - } - - if (!rfs) { - if (bfs == 16 || bfs == 32) - rfs = 256; - else - rfs = 384; - } - - /* If already setup and running */ - if (any_active(i2s) && (get_rfs(i2s) != rfs || get_bfs(i2s) != bfs)) { - dev_err(&i2s->pdev->dev, - "%s:%d Other DAI busy\n", __func__, __LINE__); - return -EAGAIN; - } - - /* We don't care about BFS in Slave mode */ - if (is_slave(i2s)) - return 0; - - set_bfs(i2s, bfs); - set_rfs(i2s, rfs); - - if (!(i2s->quirks & QUIRK_NO_MUXPSR)) { - psr = i2s->rclk_srcrate / i2s->frmclk / rfs; - writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR); - dev_dbg(&i2s->pdev->dev, - "RCLK_SRC=%luHz PSR=%u, RCLK=%dfs, BCLK=%dfs\n", - i2s->rclk_srcrate, psr, rfs, bfs); - } - - return 0; -} - -static int i2sv2_i2s_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct i2s_dai *i2s = to_info(rtd->cpu_dai); - unsigned long flags; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - local_irq_save(flags); - - if (capture) - s3c_i2sv2_fifo(i2s, FIC_RXFLUSH); - else - s3c_i2sv2_fifo(i2s, FIC_TXFLUSH); - - if (config_setup(i2s)) { - local_irq_restore(flags); - return -EINVAL; - } - - if (capture) - s3c_i2sv2_rxctrl(i2s, 1); - else - s3c_i2sv2_txctrl(i2s, 1); - - local_irq_restore(flags); - break; - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - local_irq_save(flags); - - if (capture) - s3c_i2sv2_rxctrl(i2s, 0); - else - s3c_i2sv2_txctrl(i2s, 0); - - local_irq_restore(flags); - break; - } - - return 0; -} - -static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai, - int div_id, int div) -{ - struct i2s_dai *i2s = to_info(dai); - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - - if (div_id == SAMSUNG_I2S_DIV_BCLK) { - if ((any_active(i2s) && div && (get_bfs(i2s) != div)) - || (other && other->bfs && (other->bfs != div))) { - dev_err(&i2s->pdev->dev, - "%s:%d Other DAI busy\n", __func__, __LINE__); - return -EAGAIN; - } - i2s->bfs = div; - } else { - dev_err(&i2s->pdev->dev, - "Invalid clock divider(%d)\n", div_id); - return -EINVAL; - } - - return 0; -} - -static snd_pcm_sframes_t -i2sv2_i2s_delay(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = to_info(dai); - u32 reg = readl(i2s->addr + I2SFIC); - snd_pcm_sframes_t delay; - - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - delay = FIC_RXCOUNT(reg); - else if (is_secondary(i2s)) - delay = FICS_TXCOUNT(readl(i2s->addr + I2SFICS)); - else - delay = FIC_TXCOUNT(reg); - - return delay; -} - -#ifdef CONFIG_PM -static int i2sv2_i2s_suspend(struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = to_info(dai); - - if (dai->active) { - i2s->suspend_i2smod = readl(i2s->addr + I2SMOD); - i2s->suspend_i2scon = readl(i2s->addr + I2SCON); - i2s->suspend_i2spsr = readl(i2s->addr + I2SPSR); - } - - return 0; -} - -static int i2sv2_i2s_resume(struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = to_info(dai); - - if (dai->active) { - writel(i2s->suspend_i2scon, i2s->addr + I2SCON); - writel(i2s->suspend_i2smod, i2s->addr + I2SMOD); - writel(i2s->suspend_i2spsr, i2s->addr + I2SPSR); - } - - return 0; -} -#else -#define i2sv2_i2s_suspend NULL -#define i2sv2_i2s_resume NULL -#endif - -static int samsung_i2s_dai_probe(struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = to_info(dai); - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - - if (other && other->clk) /* If this is probe on secondary */ - goto probe_exit; - - i2s->addr = ioremap(i2s->base, 0x100); - if (i2s->addr == NULL) { - dev_err(&i2s->pdev->dev, "cannot ioremap registers\n"); - return -ENXIO; - } - - i2s->clk = clk_get(&i2s->pdev->dev, "iis"); - if (IS_ERR(i2s->clk)) { - dev_err(&i2s->pdev->dev, "failed to get i2s_clock\n"); - iounmap(i2s->addr); - return -ENOENT; - } - clk_enable(i2s->clk); - - if (other) { - other->addr = i2s->addr; - other->clk = i2s->clk; - } - - if (i2s->quirks & QUIRK_NEED_RSTCLR) - writel(CON_RSTCLR, i2s->addr + I2SCON); - -probe_exit: - /* Reset any constraint on RFS and BFS */ - i2s->rfs = 0; - i2s->bfs = 0; - s3c_i2sv2_txctrl(i2s, 0); - s3c_i2sv2_rxctrl(i2s, 0); - s3c_i2sv2_fifo(i2s, FIC_TXFLUSH); - s3c_i2sv2_fifo(other, FIC_TXFLUSH); - s3c_i2sv2_fifo(i2s, FIC_RXFLUSH); - - /* Gate CDCLK by default */ - if (!is_opened(other)) - s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK, - 0, SND_SOC_CLOCK_IN); - - return 0; -} - -static int samsung_i2s_dai_remove(struct snd_soc_dai *dai) -{ - struct i2s_dai *i2s = snd_soc_dai_get_drvdata(dai); - struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; - - if (!other || !other->clk) { - - if (i2s->quirks & QUIRK_NEED_RSTCLR) - writel(0, i2s->addr + I2SCON); - - clk_disable(i2s->clk); - clk_put(i2s->clk); - - iounmap(i2s->addr); - } - - i2s->clk = NULL; - - return 0; -} - -static struct snd_soc_dai_ops samsung_i2s_dai_ops = { - .trigger = i2sv2_i2s_trigger, - .hw_params = s3c_i2sv2_hw_params, - .set_fmt = i2sv2_i2s_set_fmt, - .set_clkdiv = i2sv2_i2s_set_clkdiv, - .set_sysclk = s3c_i2sv2_set_sysclk, - .startup = s3c_i2sv2_startup, - .shutdown = s3c_i2sv2_shutdown, - .delay = i2sv2_i2s_delay, -}; - -#define SAMSUNG_I2S_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - -#define SAMSUNG_I2S_FMTS \ - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S24_LE) - -static __devinit -struct i2s_dai *s3c_alloc_dai(struct platform_device *pdev, bool sec) -{ - struct i2s_dai *i2s; - - i2s = kzalloc(sizeof(struct i2s_dai), GFP_KERNEL); - if (i2s == NULL) - return NULL; - - i2s->pdev = pdev; - i2s->pri_dai = NULL; - i2s->sec_dai = NULL; - i2s->s3c_i2s_drv.symmetric_rates = 1; - i2s->s3c_i2s_drv.probe = samsung_i2s_dai_probe; - i2s->s3c_i2s_drv.remove = samsung_i2s_dai_remove; - i2s->s3c_i2s_drv.ops = &samsung_i2s_dai_ops; - i2s->s3c_i2s_drv.suspend = i2sv2_i2s_suspend; - i2s->s3c_i2s_drv.resume = i2sv2_i2s_resume; - i2s->s3c_i2s_drv.playback.channels_min = 2; - i2s->s3c_i2s_drv.playback.channels_max = 2; - i2s->s3c_i2s_drv.playback.rates = SAMSUNG_I2S_RATES; - i2s->s3c_i2s_drv.playback.formats = SAMSUNG_I2S_FMTS; - - if (!sec) { - i2s->s3c_i2s_drv.capture.channels_min = 2; - i2s->s3c_i2s_drv.capture.channels_max = 2; - i2s->s3c_i2s_drv.capture.rates = SAMSUNG_I2S_RATES; - i2s->s3c_i2s_drv.capture.formats = SAMSUNG_I2S_FMTS; - } else { /* Create a new platform_device for Secondary */ - i2s->pdev = platform_device_register_resndata(NULL, - pdev->name, pdev->id + MAX_I2S, - NULL, 0, NULL, 0); - if (IS_ERR(i2s->pdev)) { - kfree(i2s); - return NULL; - } - } - - /* Pre-assign snd_soc_dai_set_drvdata */ - dev_set_drvdata(&i2s->pdev->dev, i2s); - - return i2s; -} - -static __devinit int samsung_i2s_probe(struct platform_device *pdev) -{ - u32 dma_pl_chan, dma_cp_chan, dma_pl_sec_chan; - struct i2s_dai *pri_dai, *sec_dai = NULL; - struct s3c_audio_pdata *i2s_pdata; - struct samsung_i2s *i2s_cfg; - struct resource *res; - u32 regs_base, quirks; - int ret = 0; - - /* Call during Seconday interface registration */ - if (pdev->id >= MAX_I2S) { - sec_dai = dev_get_drvdata(&pdev->dev); - snd_soc_register_dai(&sec_dai->pdev->dev, - &sec_dai->s3c_i2s_drv); - return 0; - } - - i2s_pdata = pdev->dev.platform_data; - if (i2s_pdata == NULL) { - dev_err(&pdev->dev, "Can't work without s3c_audio_pdata\n"); - return -EINVAL; - } - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!res) { - dev_err(&pdev->dev, "Unable to get I2S-TX dma resource\n"); - return -ENXIO; - } - dma_pl_chan = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (!res) { - dev_err(&pdev->dev, "Unable to get I2S-RX dma resource\n"); - return -ENXIO; - } - dma_cp_chan = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 2); - if (res) - dma_pl_sec_chan = res->start; - else - dma_pl_sec_chan = 0; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Unable to get I2S SFR address\n"); - return -ENXIO; - } - - if (!request_mem_region(res->start, resource_size(res), - "samsung-i2s")) { - dev_err(&pdev->dev, "Unable to request SFR region\n"); - return -EBUSY; - } - regs_base = res->start; - - i2s_cfg = &i2s_pdata->type.i2s; - quirks = i2s_cfg->quirks; - - pri_dai = s3c_alloc_dai(pdev, false); - if (!pri_dai) { - dev_err(&pdev->dev, "Unable to alloc I2S_pri\n"); - ret = -ENOMEM; - goto err1; - } - - pri_dai->dma_playback.dma_addr = regs_base + I2STXD; - pri_dai->dma_capture.dma_addr = regs_base + I2SRXD; - pri_dai->dma_playback.client = - (struct s3c2410_dma_client *)&pri_dai->dma_playback; - pri_dai->dma_capture.client = - (struct s3c2410_dma_client *)&pri_dai->dma_capture; - pri_dai->dma_playback.channel = dma_pl_chan; - pri_dai->dma_capture.channel = dma_cp_chan; - pri_dai->src_clk = i2s_cfg->src_clk; - pri_dai->dma_playback.dma_size = 4; - pri_dai->dma_capture.dma_size = 4; - pri_dai->base = regs_base; - pri_dai->quirks = quirks; - - if (quirks & QUIRK_PRI_6CHAN) - pri_dai->s3c_i2s_drv.playback.channels_max = 6; - - if (quirks & QUIRK_SEC_DAI) { - sec_dai = s3c_alloc_dai(pdev, true); - if (!sec_dai) { - dev_err(&pdev->dev, "Unable to alloc I2S_sec\n"); - ret = -ENOMEM; - goto err2; - } - sec_dai->dma_playback.dma_addr = regs_base + I2STXDS; - sec_dai->dma_playback.client = - (struct s3c2410_dma_client *)&sec_dai->dma_playback; - /* Use iDMA always if SysDMA not provided */ - sec_dai->dma_playback.channel = dma_pl_sec_chan ? : -1; - sec_dai->src_clk = i2s_cfg->src_clk; - sec_dai->dma_playback.dma_size = 4; - sec_dai->base = regs_base; - sec_dai->quirks = quirks; - sec_dai->pri_dai = pri_dai; - pri_dai->sec_dai = sec_dai; - } - - if (i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) { - dev_err(&pdev->dev, "Unable to configure gpio\n"); - ret = -EINVAL; - goto err3; - } - - snd_soc_register_dai(&pri_dai->pdev->dev, &pri_dai->s3c_i2s_drv); - - return 0; -err3: - kfree(sec_dai); -err2: - kfree(pri_dai); -err1: - release_mem_region(regs_base, resource_size(res)); - - return ret; -} - -static __devexit int samsung_i2s_remove(struct platform_device *pdev) -{ - struct i2s_dai *i2s, *other; - - i2s = dev_get_drvdata(&pdev->dev); - other = i2s->pri_dai ? : i2s->sec_dai; - - if (other) { - other->pri_dai = NULL; - other->sec_dai = NULL; - } else { - struct resource *res; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res) - release_mem_region(res->start, resource_size(res)); - } - - i2s->pri_dai = NULL; - i2s->sec_dai = NULL; - - kfree(i2s); - - snd_soc_unregister_dai(&pdev->dev); - - return 0; -} - -static struct platform_driver samsung_i2s_driver = { - .probe = samsung_i2s_probe, - .remove = samsung_i2s_remove, - .driver = { - .name = "samsung-i2s", - .owner = THIS_MODULE, - }, -}; - -static int __init samsung_i2s_init(void) -{ - return platform_driver_register(&samsung_i2s_driver); -} -module_init(samsung_i2s_init); - -static void __exit samsung_i2s_exit(void) -{ - platform_driver_unregister(&samsung_i2s_driver); -} -module_exit(samsung_i2s_exit); - -/* Module information */ -MODULE_AUTHOR("Jaswinder Singh, <jassi.brar(a)samsung.com>"); -MODULE_DESCRIPTION("Samsung I2S Interface"); -MODULE_ALIAS("platform:samsung-i2s"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/i2s.h b/sound/soc/s3c24xx/i2s.h deleted file mode 100644 index 77b7965..0000000 --- a/sound/soc/s3c24xx/i2s.h +++ /dev/null @@ -1,29 +0,0 @@ -/* sound/soc/s3c24xx/i2s.h - * - * ALSA SoC Audio Layer - Samsung I2S Controller driver - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar(a)samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SND_SOC_SAMSUNG_I2S_H -#define __SND_SOC_SAMSUNG_I2S_H - -/* - * Maximum number of I2S blocks that any SoC can have. - * The secondary interface of a CPU dai(if there exists any), - * is indexed at [cpu-dai's ID + MAX_I2S] - */ -#define MAX_I2S 4 - -#define SAMSUNG_I2S_DIV_BCLK 1 - -#define SAMSUNG_I2S_RCLKSRC_0 0 -#define SAMSUNG_I2S_RCLKSRC_1 1 -#define SAMSUNG_I2S_CDCLK 2 - -#endif /* __SND_SOC_SAMSUNG_I2S_H */ diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c deleted file mode 100644 index 4e1b8ac..0000000 --- a/sound/soc/s3c24xx/jive_wm8750.c +++ /dev/null @@ -1,191 +0,0 @@ -/* sound/soc/s3c24xx/jive_wm8750.c - * - * Copyright 2007,2008 Simtec Electronics - * - * Based on sound/soc/pxa/spitz.c - * Copyright 2005 Wolfson Microelectronics PLC. - * Copyright 2005 Openedhand Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/clk.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <asm/mach-types.h> - -#include "dma.h" -#include "s3c2412-i2s.h" - -#include "../codecs/wm8750.h" - -static const struct snd_soc_dapm_route audio_map[] = { - { "Headphone Jack", NULL, "LOUT1" }, - { "Headphone Jack", NULL, "ROUT1" }, - { "Internal Speaker", NULL, "LOUT2" }, - { "Internal Speaker", NULL, "ROUT2" }, - { "LINPUT1", NULL, "Line Input" }, - { "RINPUT1", NULL, "Line Input" }, -}; - -static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = { - SND_SOC_DAPM_HP("Headphone Jack", NULL), - SND_SOC_DAPM_SPK("Internal Speaker", NULL), - SND_SOC_DAPM_LINE("Line In", NULL), -}; - -static int jive_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct s3c_i2sv2_rate_calc div; - unsigned int clk = 0; - int ret = 0; - - switch (params_rate(params)) { - case 8000: - case 16000: - case 48000: - case 96000: - clk = 12288000; - break; - case 11025: - case 22050: - case 44100: - clk = 11289600; - break; - } - - s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params), - s3c_i2sv2_get_clock(cpu_dai)); - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk, - SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_RCLK, div.fs_div); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_PRESCALER, - div.clk_div - 1); - if (ret < 0) - return ret; - - return 0; -} - -static struct snd_soc_ops jive_ops = { - .hw_params = jive_hw_params, -}; - -static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - int err; - - /* These endpoints are not being used. */ - snd_soc_dapm_nc_pin(codec, "LINPUT2"); - snd_soc_dapm_nc_pin(codec, "RINPUT2"); - snd_soc_dapm_nc_pin(codec, "LINPUT3"); - snd_soc_dapm_nc_pin(codec, "RINPUT3"); - snd_soc_dapm_nc_pin(codec, "OUT3"); - snd_soc_dapm_nc_pin(codec, "MONO"); - - /* Add jive specific widgets */ - err = snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets, - ARRAY_SIZE(wm8750_dapm_widgets)); - if (err) { - printk(KERN_ERR "%s: failed to add widgets (%d)\n", - __func__, err); - return err; - } - - snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); - snd_soc_dapm_sync(codec); - - return 0; -} - -static struct snd_soc_dai_link jive_dai = { - .name = "wm8750", - .stream_name = "WM8750", - .cpu_dai_name = "s3c2412-i2s", - .codec_dai_name = "wm8750-hifi", - .platform_name = "samsung-audio", - .codec_name = "wm8750-codec.0-0x1a", - .init = jive_wm8750_init, - .ops = &jive_ops, -}; - -/* jive audio machine driver */ -static struct snd_soc_card snd_soc_machine_jive = { - .name = "Jive", - .dai_link = &jive_dai, - .num_links = 1, -}; - -static struct platform_device *jive_snd_device; - -static int __init jive_init(void) -{ - int ret; - - if (!machine_is_jive()) - return 0; - - printk("JIVE WM8750 Audio support\n"); - - jive_snd_device = platform_device_alloc("soc-audio", -1); - if (!jive_snd_device) - return -ENOMEM; - - platform_set_drvdata(jive_snd_device, &snd_soc_machine_jive); - ret = platform_device_add(jive_snd_device); - - if (ret) - platform_device_put(jive_snd_device); - - return ret; -} - -static void __exit jive_exit(void) -{ - platform_device_unregister(jive_snd_device); -} - -module_init(jive_init); -module_exit(jive_exit); - -MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); -MODULE_DESCRIPTION("ALSA SoC Jive Audio support"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/lm4857.h b/sound/soc/s3c24xx/lm4857.h deleted file mode 100644 index 0cf5b70..0000000 --- a/sound/soc/s3c24xx/lm4857.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * lm4857.h -- ALSA Soc Audio Layer - * - * Copyright 2007 Wolfson Microelectronics PLC. - * Author: Graeme Gregory - * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Revision history - * 18th Jun 2007 Initial version. - */ - -#ifndef LM4857_H_ -#define LM4857_H_ - -/* The register offsets in the cache array */ -#define LM4857_MVOL 0 -#define LM4857_LVOL 1 -#define LM4857_RVOL 2 -#define LM4857_CTRL 3 - -/* the shifts required to set these bits */ -#define LM4857_3D 5 -#define LM4857_WAKEUP 5 -#define LM4857_EPGAIN 4 - -#endif /*LM4857_H_*/ - diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c deleted file mode 100644 index e507174..0000000 --- a/sound/soc/s3c24xx/ln2440sbc_alc650.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * SoC audio for ln2440sbc - * - * Copyright 2007 KonekTel, a.s. - * Author: Ivan Kuten - * ivan.kuten(a)promwad.com - * - * Heavily based on smdk2443_wm9710.c - * Copyright 2007 Wolfson Microelectronics PLC. - * Author: Graeme Gregory - * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include "dma.h" -#include "ac97.h" - -static struct snd_soc_card ln2440sbc; - -static struct snd_soc_dai_link ln2440sbc_dai[] = { -{ - .name = "AC97", - .stream_name = "AC97 HiFi", - .cpu_dai_name = "samsung-ac97", - .codec_dai_name = "ac97-hifi", - .codec_name = "ac97-codec", - .platform_name = "samsung-audio", -}, -}; - -static struct snd_soc_card ln2440sbc = { - .name = "LN2440SBC", - .dai_link = ln2440sbc_dai, - .num_links = ARRAY_SIZE(ln2440sbc_dai), -}; - -static struct platform_device *ln2440sbc_snd_ac97_device; - -static int __init ln2440sbc_init(void) -{ - int ret; - - ln2440sbc_snd_ac97_device = platform_device_alloc("soc-audio", -1); - if (!ln2440sbc_snd_ac97_device) - return -ENOMEM; - - platform_set_drvdata(ln2440sbc_snd_ac97_device, &ln2440sbc); - ret = platform_device_add(ln2440sbc_snd_ac97_device); - - if (ret) - platform_device_put(ln2440sbc_snd_ac97_device); - - return ret; -} - -static void __exit ln2440sbc_exit(void) -{ - platform_device_unregister(ln2440sbc_snd_ac97_device); -} - -module_init(ln2440sbc_init); -module_exit(ln2440sbc_exit); - -/* Module information */ -MODULE_AUTHOR("Ivan Kuten"); -MODULE_DESCRIPTION("ALSA SoC ALC650 LN2440SBC"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c deleted file mode 100644 index c4b2013..0000000 --- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02) - * - * Copyright 2007 Openmoko Inc - * Author: Graeme Gregory <graeme(a)openmoko.org> - * Copyright 2007 Wolfson Microelectronics PLC. - * Author: Graeme Gregory <linux(a)wolfsonmicro.com> - * Copyright 2009 Wolfson Microelectronics - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <asm/mach-types.h> - -#include <plat/regs-iis.h> - -#include <mach/regs-clock.h> -#include <asm/io.h> -#include <mach/gta02.h> -#include "../codecs/wm8753.h" -#include "dma.h" -#include "s3c24xx-i2s.h" - -static struct snd_soc_card neo1973_gta02; - -static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned int pll_out = 0, bclk = 0; - int ret = 0; - unsigned long iis_clkrate; - - iis_clkrate = s3c24xx_i2s_get_clockrate(); - - switch (params_rate(params)) { - case 8000: - case 16000: - pll_out = 12288000; - break; - case 48000: - bclk = WM8753_BCLK_DIV_4; - pll_out = 12288000; - break; - case 96000: - bclk = WM8753_BCLK_DIV_2; - pll_out = 12288000; - break; - case 11025: - bclk = WM8753_BCLK_DIV_16; - pll_out = 11289600; - break; - case 22050: - bclk = WM8753_BCLK_DIV_8; - pll_out = 11289600; - break; - case 44100: - bclk = WM8753_BCLK_DIV_4; - pll_out = 11289600; - break; - case 88200: - bclk = WM8753_BCLK_DIV_2; - pll_out = 11289600; - break; - } - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, - SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, - SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out, - SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* set MCLK division for sample rate */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, - S3C2410_IISMOD_32FS); - if (ret < 0) - return ret; - - /* set codec BCLK division for sample rate */ - ret = snd_soc_dai_set_clkdiv(codec_dai, - WM8753_BCLKDIV, bclk); - if (ret < 0) - return ret; - - /* set prescaler division for sample rate */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, - S3C24XX_PRESCALE(4, 4)); - if (ret < 0) - return ret; - - /* codec PLL input is PCLK/4 */ - ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, - iis_clkrate / 4, pll_out); - if (ret < 0) - return ret; - - return 0; -} - -static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - - /* disable the PLL */ - return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0); -} - -/* - * Neo1973 WM8753 HiFi DAI opserations. - */ -static struct snd_soc_ops neo1973_gta02_hifi_ops = { - .hw_params = neo1973_gta02_hifi_hw_params, - .hw_free = neo1973_gta02_hifi_hw_free, -}; - -static int neo1973_gta02_voice_hw_params( - struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - unsigned int pcmdiv = 0; - int ret = 0; - unsigned long iis_clkrate; - - iis_clkrate = s3c24xx_i2s_get_clockrate(); - - if (params_rate(params) != 8000) - return -EINVAL; - if (params_channels(params) != 1) - return -EINVAL; - - pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */ - - /* todo: gg check mode (DSP_B) against CSR datasheet */ - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, - 12288000, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* set codec PCM division for sample rate */ - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, - pcmdiv); - if (ret < 0) - return ret; - - /* configue and enable PLL for 12.288MHz output */ - ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, - iis_clkrate / 4, 12288000); - if (ret < 0) - return ret; - - return 0; -} - -static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - - /* disable the PLL */ - return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0); -} - -static struct snd_soc_ops neo1973_gta02_voice_ops = { - .hw_params = neo1973_gta02_voice_hw_params, - .hw_free = neo1973_gta02_voice_hw_free, -}; - -#define LM4853_AMP 1 -#define LM4853_SPK 2 - -static u8 lm4853_state; - -/* This has no effect, it exists only to maintain compatibility with - * existing ALSA state files. - */ -static int lm4853_set_state(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - int val = ucontrol->value.integer.value[0]; - - if (val) - lm4853_state |= LM4853_AMP; - else - lm4853_state &= ~LM4853_AMP; - - return 0; -} - -static int lm4853_get_state(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP; - - return 0; -} - -static int lm4853_set_spk(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - int val = ucontrol->value.integer.value[0]; - - if (val) { - lm4853_state |= LM4853_SPK; - gpio_set_value(GTA02_GPIO_HP_IN, 0); - } else { - lm4853_state &= ~LM4853_SPK; - gpio_set_value(GTA02_GPIO_HP_IN, 1); - } - - return 0; -} - -static int lm4853_get_spk(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1; - - return 0; -} - -static int lm4853_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, - int event) -{ - gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event)); - - return 0; -} - -static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = { - SND_SOC_DAPM_SPK("Stereo Out", lm4853_event), - SND_SOC_DAPM_LINE("GSM Line Out", NULL), - SND_SOC_DAPM_LINE("GSM Line In", NULL), - SND_SOC_DAPM_MIC("Headset Mic", NULL), - SND_SOC_DAPM_MIC("Handset Mic", NULL), - SND_SOC_DAPM_SPK("Handset Spk", NULL), -}; - - -/* example machine audio_mapnections */ -static const struct snd_soc_dapm_route audio_map[] = { - - /* Connections to the lm4853 amp */ - {"Stereo Out", NULL, "LOUT1"}, - {"Stereo Out", NULL, "ROUT1"}, - - /* Connections to the GSM Module */ - {"GSM Line Out", NULL, "MONO1"}, - {"GSM Line Out", NULL, "MONO2"}, - {"RXP", NULL, "GSM Line In"}, - {"RXN", NULL, "GSM Line In"}, - - /* Connections to Headset */ - {"MIC1", NULL, "Mic Bias"}, - {"Mic Bias", NULL, "Headset Mic"}, - - /* Call Mic */ - {"MIC2", NULL, "Mic Bias"}, - {"MIC2N", NULL, "Mic Bias"}, - {"Mic Bias", NULL, "Handset Mic"}, - - /* Call Speaker */ - {"Handset Spk", NULL, "LOUT2"}, - {"Handset Spk", NULL, "ROUT2"}, - - /* Connect the ALC pins */ - {"ACIN", NULL, "ACOP"}, -}; - -static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = { - SOC_DAPM_PIN_SWITCH("Stereo Out"), - SOC_DAPM_PIN_SWITCH("GSM Line Out"), - SOC_DAPM_PIN_SWITCH("GSM Line In"), - SOC_DAPM_PIN_SWITCH("Headset Mic"), - SOC_DAPM_PIN_SWITCH("Handset Mic"), - SOC_DAPM_PIN_SWITCH("Handset Spk"), - - /* This has no effect, it exists only to maintain compatibility with - * existing ALSA state files. - */ - SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0, - lm4853_get_state, - lm4853_set_state), - SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0, - lm4853_get_spk, - lm4853_set_spk), -}; - -/* - * This is an example machine initialisation for a wm8753 connected to a - * neo1973 GTA02. - */ -static int neo1973_gta02_wm8753_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - int err; - - /* set up NC codec pins */ - snd_soc_dapm_nc_pin(codec, "OUT3"); - snd_soc_dapm_nc_pin(codec, "OUT4"); - snd_soc_dapm_nc_pin(codec, "LINE1"); - snd_soc_dapm_nc_pin(codec, "LINE2"); - - /* Add neo1973 gta02 specific widgets */ - snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets, - ARRAY_SIZE(wm8753_dapm_widgets)); - - /* add neo1973 gta02 specific controls */ - err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls, - ARRAY_SIZE(wm8753_neo1973_gta02_controls)); - - if (err < 0) - return err; - - /* set up neo1973 gta02 specific audio path audio_map */ - snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); - - /* set endpoints to default off mode */ - snd_soc_dapm_disable_pin(codec, "Stereo Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Handset Mic"); - snd_soc_dapm_disable_pin(codec, "Handset Spk"); - - /* allow audio paths from the GSM modem to run during suspend */ - snd_soc_dapm_ignore_suspend(codec, "Stereo Out"); - snd_soc_dapm_ignore_suspend(codec, "GSM Line Out"); - snd_soc_dapm_ignore_suspend(codec, "GSM Line In"); - snd_soc_dapm_ignore_suspend(codec, "Headset Mic"); - snd_soc_dapm_ignore_suspend(codec, "Handset Mic"); - snd_soc_dapm_ignore_suspend(codec, "Handset Spk"); - - snd_soc_dapm_sync(codec); - - return 0; -} - -/* - * BT Codec DAI - */ -static struct snd_soc_dai_driver bt_dai = { - .name = "bluetooth-dai", - .playback = { - .channels_min = 1, - .channels_max = 1, - .rates = SNDRV_PCM_RATE_8000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .capture = { - .channels_min = 1, - .channels_max = 1, - .rates = SNDRV_PCM_RATE_8000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, -}; - -static struct snd_soc_dai_link neo1973_gta02_dai[] = { -{ /* Hifi Playback - for similatious use with voice below */ - .name = "WM8753", - .stream_name = "WM8753 HiFi", - .cpu_dai_name = "s3c24xx-i2s", - .codec_dai_name = "wm8753-hifi", - .init = neo1973_gta02_wm8753_init, - .platform_name = "samsung-audio", - .codec_name = "wm8753-codec.0-0x1a", - .ops = &neo1973_gta02_hifi_ops, -}, -{ /* Voice via BT */ - .name = "Bluetooth", - .stream_name = "Voice", - .cpu_dai_name = "bluetooth-dai", - .codec_dai_name = "wm8753-voice", - .ops = &neo1973_gta02_voice_ops, - .codec_name = "wm8753-codec.0-0x1a", - .platform_name = "samsung-audio", -}, -}; - -static struct snd_soc_card neo1973_gta02 = { - .name = "neo1973-gta02", - .dai_link = neo1973_gta02_dai, - .num_links = ARRAY_SIZE(neo1973_gta02_dai), -}; - -static struct platform_device *neo1973_gta02_snd_device; - -static int __init neo1973_gta02_init(void) -{ - int ret; - - if (!machine_is_neo1973_gta02()) { - printk(KERN_INFO - "Only GTA02 is supported by this ASoC driver\n"); - return -ENODEV; - } - - neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1); - if (!neo1973_gta02_snd_device) - return -ENOMEM; - - /* register bluetooth DAI here */ - ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, -1, &bt_dai); - if (ret) { - platform_device_put(neo1973_gta02_snd_device); - return ret; - } - - platform_set_drvdata(neo1973_gta02_snd_device, &neo1973_gta02); - ret = platform_device_add(neo1973_gta02_snd_device); - - if (ret) { - platform_device_put(neo1973_gta02_snd_device); - return ret; - } - - /* Initialise GPIOs used by amp */ - ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN"); - if (ret) { - pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN); - goto err_unregister_device; - } - - ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1); - if (ret) { - pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN); - goto err_free_gpio_hp_in; - } - - ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT"); - if (ret) { - pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT); - goto err_free_gpio_hp_in; - } - - ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1); - if (ret) { - pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT); - goto err_free_gpio_amp_shut; - } - - return 0; - -err_free_gpio_amp_shut: - gpio_free(GTA02_GPIO_AMP_SHUT); -err_free_gpio_hp_in: - gpio_free(GTA02_GPIO_HP_IN); -err_unregister_device: - platform_device_unregister(neo1973_gta02_snd_device); - return ret; -} -module_init(neo1973_gta02_init); - -static void __exit neo1973_gta02_exit(void) -{ - snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev, -1); - platform_device_unregister(neo1973_gta02_snd_device); - gpio_free(GTA02_GPIO_HP_IN); - gpio_free(GTA02_GPIO_AMP_SHUT); -} -module_exit(neo1973_gta02_exit); - -/* Module information */ -MODULE_AUTHOR("Graeme Gregory, graeme(a)openmoko.org"); -MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c deleted file mode 100644 index 96dda57..0000000 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ /dev/null @@ -1,704 +0,0 @@ -/* - * neo1973_wm8753.c -- SoC audio for Neo1973 - * - * Copyright 2007 Wolfson Microelectronics PLC. - * Author: Graeme Gregory - * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> -#include <sound/tlv.h> - -#include <asm/mach-types.h> -#include <asm/hardware/scoop.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> -#include <mach/hardware.h> -#include <linux/io.h> -#include <mach/spi-gpio.h> - -#include <plat/regs-iis.h> - -#include "../codecs/wm8753.h" -#include "lm4857.h" -#include "dma.h" -#include "s3c24xx-i2s.h" - -/* define the scenarios */ -#define NEO_AUDIO_OFF 0 -#define NEO_GSM_CALL_AUDIO_HANDSET 1 -#define NEO_GSM_CALL_AUDIO_HEADSET 2 -#define NEO_GSM_CALL_AUDIO_BLUETOOTH 3 -#define NEO_STEREO_TO_SPEAKERS 4 -#define NEO_STEREO_TO_HEADPHONES 5 -#define NEO_CAPTURE_HANDSET 6 -#define NEO_CAPTURE_HEADSET 7 -#define NEO_CAPTURE_BLUETOOTH 8 - -static struct snd_soc_card neo1973; -static struct i2c_client *i2c; - -static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned int pll_out = 0, bclk = 0; - int ret = 0; - unsigned long iis_clkrate; - - pr_debug("Entered %s\n", __func__); - - iis_clkrate = s3c24xx_i2s_get_clockrate(); - - switch (params_rate(params)) { - case 8000: - case 16000: - pll_out = 12288000; - break; - case 48000: - bclk = WM8753_BCLK_DIV_4; - pll_out = 12288000; - break; - case 96000: - bclk = WM8753_BCLK_DIV_2; - pll_out = 12288000; - break; - case 11025: - bclk = WM8753_BCLK_DIV_16; - pll_out = 11289600; - break; - case 22050: - bclk = WM8753_BCLK_DIV_8; - pll_out = 11289600; - break; - case 44100: - bclk = WM8753_BCLK_DIV_4; - pll_out = 11289600; - break; - case 88200: - bclk = WM8753_BCLK_DIV_2; - pll_out = 11289600; - break; - } - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, - SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, - SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out, - SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* set MCLK division for sample rate */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, - S3C2410_IISMOD_32FS); - if (ret < 0) - return ret; - - /* set codec BCLK division for sample rate */ - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_BCLKDIV, bclk); - if (ret < 0) - return ret; - - /* set prescaler division for sample rate */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, - S3C24XX_PRESCALE(4, 4)); - if (ret < 0) - return ret; - - /* codec PLL input is PCLK/4 */ - ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, - iis_clkrate / 4, pll_out); - if (ret < 0) - return ret; - - return 0; -} - -static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - - pr_debug("Entered %s\n", __func__); - - /* disable the PLL */ - return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0); -} - -/* - * Neo1973 WM8753 HiFi DAI opserations. - */ -static struct snd_soc_ops neo1973_hifi_ops = { - .hw_params = neo1973_hifi_hw_params, - .hw_free = neo1973_hifi_hw_free, -}; - -static int neo1973_voice_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - unsigned int pcmdiv = 0; - int ret = 0; - unsigned long iis_clkrate; - - pr_debug("Entered %s\n", __func__); - - iis_clkrate = s3c24xx_i2s_get_clockrate(); - - if (params_rate(params) != 8000) - return -EINVAL; - if (params_channels(params) != 1) - return -EINVAL; - - pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */ - - /* todo: gg check mode (DSP_B) against CSR datasheet */ - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, 12288000, - SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* set codec PCM division for sample rate */ - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, pcmdiv); - if (ret < 0) - return ret; - - /* configue and enable PLL for 12.288MHz output */ - ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, - iis_clkrate / 4, 12288000); - if (ret < 0) - return ret; - - return 0; -} - -static int neo1973_voice_hw_free(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - - pr_debug("Entered %s\n", __func__); - - /* disable the PLL */ - return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0); -} - -static struct snd_soc_ops neo1973_voice_ops = { - .hw_params = neo1973_voice_hw_params, - .hw_free = neo1973_voice_hw_free, -}; - -static int neo1973_scenario; - -static int neo1973_get_scenario(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - ucontrol->value.integer.value[0] = neo1973_scenario; - return 0; -} - -static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario) -{ - pr_debug("Entered %s\n", __func__); - - switch (neo1973_scenario) { - case NEO_AUDIO_OFF: - snd_soc_dapm_disable_pin(codec, "Audio Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - break; - case NEO_GSM_CALL_AUDIO_HANDSET: - snd_soc_dapm_enable_pin(codec, "Audio Out"); - snd_soc_dapm_enable_pin(codec, "GSM Line Out"); - snd_soc_dapm_enable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_enable_pin(codec, "Call Mic"); - break; - case NEO_GSM_CALL_AUDIO_HEADSET: - snd_soc_dapm_enable_pin(codec, "Audio Out"); - snd_soc_dapm_enable_pin(codec, "GSM Line Out"); - snd_soc_dapm_enable_pin(codec, "GSM Line In"); - snd_soc_dapm_enable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - break; - case NEO_GSM_CALL_AUDIO_BLUETOOTH: - snd_soc_dapm_disable_pin(codec, "Audio Out"); - snd_soc_dapm_enable_pin(codec, "GSM Line Out"); - snd_soc_dapm_enable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - break; - case NEO_STEREO_TO_SPEAKERS: - snd_soc_dapm_enable_pin(codec, "Audio Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - break; - case NEO_STEREO_TO_HEADPHONES: - snd_soc_dapm_enable_pin(codec, "Audio Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - break; - case NEO_CAPTURE_HANDSET: - snd_soc_dapm_disable_pin(codec, "Audio Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_enable_pin(codec, "Call Mic"); - break; - case NEO_CAPTURE_HEADSET: - snd_soc_dapm_disable_pin(codec, "Audio Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_enable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - break; - case NEO_CAPTURE_BLUETOOTH: - snd_soc_dapm_disable_pin(codec, "Audio Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - break; - default: - snd_soc_dapm_disable_pin(codec, "Audio Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line Out"); - snd_soc_dapm_disable_pin(codec, "GSM Line In"); - snd_soc_dapm_disable_pin(codec, "Headset Mic"); - snd_soc_dapm_disable_pin(codec, "Call Mic"); - } - - snd_soc_dapm_sync(codec); - - return 0; -} - -static int neo1973_set_scenario(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - - pr_debug("Entered %s\n", __func__); - - if (neo1973_scenario == ucontrol->value.integer.value[0]) - return 0; - - neo1973_scenario = ucontrol->value.integer.value[0]; - set_scenario_endpoints(codec, neo1973_scenario); - return 1; -} - -static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0}; - -static void lm4857_write_regs(void) -{ - pr_debug("Entered %s\n", __func__); - - if (i2c_master_send(i2c, lm4857_regs, 4) != 4) - printk(KERN_ERR "lm4857: i2c write failed\n"); -} - -static int lm4857_get_reg(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct soc_mixer_control *mc = - (struct soc_mixer_control *)kcontrol->private_value; - int reg = mc->reg; - int shift = mc->shift; - int mask = mc->max; - - pr_debug("Entered %s\n", __func__); - - ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask; - return 0; -} - -static int lm4857_set_reg(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct soc_mixer_control *mc = - (struct soc_mixer_control *)kcontrol->private_value; - int reg = mc->reg; - int shift = mc->shift; - int mask = mc->max; - - if (((lm4857_regs[reg] >> shift) & mask) == - ucontrol->value.integer.value[0]) - return 0; - - lm4857_regs[reg] &= ~(mask << shift); - lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift; - lm4857_write_regs(); - return 1; -} - -static int lm4857_get_mode(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - u8 value = lm4857_regs[LM4857_CTRL] & 0x0F; - - pr_debug("Entered %s\n", __func__); - - if (value) - value -= 5; - - ucontrol->value.integer.value[0] = value; - return 0; -} - -static int lm4857_set_mode(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - u8 value = ucontrol->value.integer.value[0]; - - pr_debug("Entered %s\n", __func__); - - if (value) - value += 5; - - if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value) - return 0; - - lm4857_regs[LM4857_CTRL] &= 0xF0; - lm4857_regs[LM4857_CTRL] |= value; - lm4857_write_regs(); - return 1; -} - -static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = { - SND_SOC_DAPM_LINE("Audio Out", NULL), - SND_SOC_DAPM_LINE("GSM Line Out", NULL), - SND_SOC_DAPM_LINE("GSM Line In", NULL), - SND_SOC_DAPM_MIC("Headset Mic", NULL), - SND_SOC_DAPM_MIC("Call Mic", NULL), -}; - - -static const struct snd_soc_dapm_route dapm_routes[] = { - - /* Connections to the lm4857 amp */ - {"Audio Out", NULL, "LOUT1"}, - {"Audio Out", NULL, "ROUT1"}, - - /* Connections to the GSM Module */ - {"GSM Line Out", NULL, "MONO1"}, - {"GSM Line Out", NULL, "MONO2"}, - {"RXP", NULL, "GSM Line In"}, - {"RXN", NULL, "GSM Line In"}, - - /* Connections to Headset */ - {"MIC1", NULL, "Mic Bias"}, - {"Mic Bias", NULL, "Headset Mic"}, - - /* Call Mic */ - {"MIC2", NULL, "Mic Bias"}, - {"MIC2N", NULL, "Mic Bias"}, - {"Mic Bias", NULL, "Call Mic"}, - - /* Connect the ALC pins */ - {"ACIN", NULL, "ACOP"}, -}; - -static const char *lm4857_mode[] = { - "Off", - "Call Speaker", - "Stereo Speakers", - "Stereo Speakers + Headphones", - "Headphones" -}; - -static const struct soc_enum lm4857_mode_enum[] = { - SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode), -}; - -static const char *neo_scenarios[] = { - "Off", - "GSM Handset", - "GSM Headset", - "GSM Bluetooth", - "Speakers", - "Headphones", - "Capture Handset", - "Capture Headset", - "Capture Bluetooth" -}; - -static const struct soc_enum neo_scenario_enum[] = { - SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(neo_scenarios), neo_scenarios), -}; - -static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0); -static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0); - -static const struct snd_kcontrol_new wm8753_neo1973_controls[] = { - SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0, - lm4857_get_reg, lm4857_set_reg, stereo_tlv), - SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0, - lm4857_get_reg, lm4857_set_reg, stereo_tlv), - SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0, - lm4857_get_reg, lm4857_set_reg, mono_tlv), - SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0], - lm4857_get_mode, lm4857_set_mode), - SOC_ENUM_EXT("Neo Mode", neo_scenario_enum[0], - neo1973_get_scenario, neo1973_set_scenario), - SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0, - lm4857_get_reg, lm4857_set_reg), - SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0, - lm4857_get_reg, lm4857_set_reg), - SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0, - lm4857_get_reg, lm4857_set_reg), - SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0, - lm4857_get_reg, lm4857_set_reg), -}; - -/* - * This is an example machine initialisation for a wm8753 connected to a - * neo1973 II. It is missing logic to detect hp/mic insertions and logic - * to re-route the audio in such an event. - */ -static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - int err; - - pr_debug("Entered %s\n", __func__); - - /* set up NC codec pins */ - snd_soc_dapm_nc_pin(codec, "LOUT2"); - snd_soc_dapm_nc_pin(codec, "ROUT2"); - snd_soc_dapm_nc_pin(codec, "OUT3"); - snd_soc_dapm_nc_pin(codec, "OUT4"); - snd_soc_dapm_nc_pin(codec, "LINE1"); - snd_soc_dapm_nc_pin(codec, "LINE2"); - - /* Add neo1973 specific widgets */ - snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets, - ARRAY_SIZE(wm8753_dapm_widgets)); - - /* set endpoints to default mode */ - set_scenario_endpoints(codec, NEO_AUDIO_OFF); - - /* add neo1973 specific controls */ - err = snd_soc_add_controls(codec, wm8753_neo1973_controls, - ARRAY_SIZE(8753_neo1973_controls)); - if (err < 0) - return err; - - /* set up neo1973 specific audio routes */ - err = snd_soc_dapm_add_routes(codec, dapm_routes, - ARRAY_SIZE(dapm_routes)); - - snd_soc_dapm_sync(codec); - return 0; -} - -/* - * BT Codec DAI - */ -static struct snd_soc_dai bt_dai = { - .name = "bluetooth-dai", - .playback = { - .channels_min = 1, - .channels_max = 1, - .rates = SNDRV_PCM_RATE_8000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, - .capture = { - .channels_min = 1, - .channels_max = 1, - .rates = SNDRV_PCM_RATE_8000, - .formats = SNDRV_PCM_FMTBIT_S16_LE,}, -}; - -static struct snd_soc_dai_link neo1973_dai[] = { -{ /* Hifi Playback - for similatious use with voice below */ - .name = "WM8753", - .stream_name = "WM8753 HiFi", - .platform_name = "samsung-audio", - .cpu_dai_name = "s3c24xx-i2s", - .codec_dai_name = "wm8753-hifi", - .codec_name = "wm8753-codec.0-0x1a", - .init = neo1973_wm8753_init, - .ops = &neo1973_hifi_ops, -}, -{ /* Voice via BT */ - .name = "Bluetooth", - .stream_name = "Voice", - .platform_name = "samsung-audio", - .cpu_dai_name = "bluetooth-dai", - .codec_dai_name = "wm8753-voice", - .codec_name = "wm8753-codec.0-0x1a", - .ops = &neo1973_voice_ops, -}, -}; - -static struct snd_soc_card neo1973 = { - .name = "neo1973", - .dai_link = neo1973_dai, - .num_links = ARRAY_SIZE(neo1973_dai), -}; - -static int lm4857_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - pr_debug("Entered %s\n", __func__); - - i2c = client; - - lm4857_write_regs(); - return 0; -} - -static int lm4857_i2c_remove(struct i2c_client *client) -{ - pr_debug("Entered %s\n", __func__); - - i2c = NULL; - - return 0; -} - -static u8 lm4857_state; - -static int lm4857_suspend(struct i2c_client *dev, pm_message_t state) -{ - pr_debug("Entered %s\n", __func__); - - dev_dbg(&dev->dev, "lm4857_suspend\n"); - lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf; - if (lm4857_state) { - lm4857_regs[LM4857_CTRL] &= 0xf0; - lm4857_write_regs(); - } - return 0; -} - -static int lm4857_resume(struct i2c_client *dev) -{ - pr_debug("Entered %s\n", __func__); - - if (lm4857_state) { - lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f); - lm4857_write_regs(); - } - return 0; -} - -static void lm4857_shutdown(struct i2c_client *dev) -{ - pr_debug("Entered %s\n", __func__); - - dev_dbg(&dev->dev, "lm4857_shutdown\n"); - lm4857_regs[LM4857_CTRL] &= 0xf0; - lm4857_write_regs(); -} - -static const struct i2c_device_id lm4857_i2c_id[] = { - { "neo1973_lm4857", 0 }, - { } -}; - -static struct i2c_driver lm4857_i2c_driver = { - .driver = { - .name = "LM4857 I2C Amp", - .owner = THIS_MODULE, - }, - .suspend = lm4857_suspend, - .resume = lm4857_resume, - .shutdown = lm4857_shutdown, - .probe = lm4857_i2c_probe, - .remove = lm4857_i2c_remove, - .id_table = lm4857_i2c_id, -}; - -static struct platform_device *neo1973_snd_device; - -static int __init neo1973_init(void) -{ - int ret; - - pr_debug("Entered %s\n", __func__); - - if (!machine_is_neo1973_gta01()) { - printk(KERN_INFO - "Only GTA01 hardware supported by ASoC driver\n"); - return -ENODEV; - } - - neo1973_snd_device = platform_device_alloc("soc-audio", -1); - if (!neo1973_snd_device) - return -ENOMEM; - - platform_set_drvdata(neo1973_snd_device, &neo1973); - ret = platform_device_add(neo1973_snd_device); - - if (ret) { - platform_device_put(neo1973_snd_device); - return ret; - } - - ret = i2c_add_driver(&lm4857_i2c_driver); - - if (ret != 0) - platform_device_unregister(neo1973_snd_device); - - return ret; -} - -static void __exit neo1973_exit(void) -{ - pr_debug("Entered %s\n", __func__); - - i2c_del_driver(&lm4857_i2c_driver); - platform_device_unregister(neo1973_snd_device); -} - -module_init(neo1973_init); -module_exit(neo1973_exit); - -/* Module information */ -MODULE_AUTHOR("Graeme Gregory, graeme(a)openmoko.org, www.openmoko.org"); -MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/pcm.c b/sound/soc/s3c24xx/pcm.c deleted file mode 100644 index 4d0f6e4..0000000 --- a/sound/soc/s3c24xx/pcm.c +++ /dev/null @@ -1,552 +0,0 @@ -/* sound/soc/s3c24xx/pcm.c - * - * ALSA SoC Audio Layer - S3C PCM-Controller driver - * - * Copyright (c) 2009 Samsung Electronics Co. Ltd - * Author: Jaswinder Singh <jassi.brar(a)samsung.com> - * based upon I2S drivers by Ben Dooks. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <plat/audio.h> -#include <plat/dma.h> - -#include "dma.h" -#include "pcm.h" - -static struct s3c2410_dma_client s3c_pcm_dma_client_out = { - .name = "PCM Stereo out" -}; - -static struct s3c2410_dma_client s3c_pcm_dma_client_in = { - .name = "PCM Stereo in" -}; - -static struct s3c_dma_params s3c_pcm_stereo_out[] = { - [0] = { - .client = &s3c_pcm_dma_client_out, - .dma_size = 4, - }, - [1] = { - .client = &s3c_pcm_dma_client_out, - .dma_size = 4, - }, -}; - -static struct s3c_dma_params s3c_pcm_stereo_in[] = { - [0] = { - .client = &s3c_pcm_dma_client_in, - .dma_size = 4, - }, - [1] = { - .client = &s3c_pcm_dma_client_in, - .dma_size = 4, - }, -}; - -static struct s3c_pcm_info s3c_pcm[2]; - -static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on) -{ - void __iomem *regs = pcm->regs; - u32 ctl, clkctl; - - clkctl = readl(regs + S3C_PCM_CLKCTL); - ctl = readl(regs + S3C_PCM_CTL); - ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK - << S3C_PCM_CTL_TXDIPSTICK_SHIFT); - - if (on) { - ctl |= S3C_PCM_CTL_TXDMA_EN; - ctl |= S3C_PCM_CTL_TXFIFO_EN; - ctl |= S3C_PCM_CTL_ENABLE; - ctl |= (0x4<<S3C_PCM_CTL_TXDIPSTICK_SHIFT); - clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; - } else { - ctl &= ~S3C_PCM_CTL_TXDMA_EN; - ctl &= ~S3C_PCM_CTL_TXFIFO_EN; - - if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) { - ctl &= ~S3C_PCM_CTL_ENABLE; - if (!pcm->idleclk) - clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; - } - } - - writel(clkctl, regs + S3C_PCM_CLKCTL); - writel(ctl, regs + S3C_PCM_CTL); -} - -static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on) -{ - void __iomem *regs = pcm->regs; - u32 ctl, clkctl; - - ctl = readl(regs + S3C_PCM_CTL); - clkctl = readl(regs + S3C_PCM_CLKCTL); - ctl &= ~(S3C_PCM_CTL_RXDIPSTICK_MASK - << S3C_PCM_CTL_RXDIPSTICK_SHIFT); - - if (on) { - ctl |= S3C_PCM_CTL_RXDMA_EN; - ctl |= S3C_PCM_CTL_RXFIFO_EN; - ctl |= S3C_PCM_CTL_ENABLE; - ctl |= (0x20<<S3C_PCM_CTL_RXDIPSTICK_SHIFT); - clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; - } else { - ctl &= ~S3C_PCM_CTL_RXDMA_EN; - ctl &= ~S3C_PCM_CTL_RXFIFO_EN; - - if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) { - ctl &= ~S3C_PCM_CTL_ENABLE; - if (!pcm->idleclk) - clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; - } - } - - writel(clkctl, regs + S3C_PCM_CLKCTL); - writel(ctl, regs + S3C_PCM_CTL); -} - -static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai); - unsigned long flags; - - dev_dbg(pcm->dev, "Entered %s\n", __func__); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - spin_lock_irqsave(&pcm->lock, flags); - - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - s3c_pcm_snd_rxctrl(pcm, 1); - else - s3c_pcm_snd_txctrl(pcm, 1); - - spin_unlock_irqrestore(&pcm->lock, flags); - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - spin_lock_irqsave(&pcm->lock, flags); - - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - s3c_pcm_snd_rxctrl(pcm, 0); - else - s3c_pcm_snd_txctrl(pcm, 0); - - spin_unlock_irqrestore(&pcm->lock, flags); - break; - - default: - return -EINVAL; - } - - return 0; -} - -static int s3c_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *socdai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai); - struct s3c_dma_params *dma_data; - void __iomem *regs = pcm->regs; - struct clk *clk; - int sclk_div, sync_div; - unsigned long flags; - u32 clkctl; - - dev_dbg(pcm->dev, "Entered %s\n", __func__); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = pcm->dma_playback; - else - dma_data = pcm->dma_capture; - - snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); - - /* Strictly check for sample size */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S16_LE: - break; - default: - return -EINVAL; - } - - spin_lock_irqsave(&pcm->lock, flags); - - /* Get hold of the PCMSOURCE_CLK */ - clkctl = readl(regs + S3C_PCM_CLKCTL); - if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK) - clk = pcm->pclk; - else - clk = pcm->cclk; - - /* Set the SCLK divider */ - sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs / - params_rate(params) / 2 - 1; - - clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK - << S3C_PCM_CLKCTL_SCLKDIV_SHIFT); - clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK) - << S3C_PCM_CLKCTL_SCLKDIV_SHIFT); - - /* Set the SYNC divider */ - sync_div = pcm->sclk_per_fs - 1; - - clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK - << S3C_PCM_CLKCTL_SYNCDIV_SHIFT); - clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK) - << S3C_PCM_CLKCTL_SYNCDIV_SHIFT); - - writel(clkctl, regs + S3C_PCM_CLKCTL); - - spin_unlock_irqrestore(&pcm->lock, flags); - - dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n", - clk_get_rate(clk), pcm->sclk_per_fs, - sclk_div, sync_div); - - return 0; -} - -static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai); - void __iomem *regs = pcm->regs; - unsigned long flags; - int ret = 0; - u32 ctl; - - dev_dbg(pcm->dev, "Entered %s\n", __func__); - - spin_lock_irqsave(&pcm->lock, flags); - - ctl = readl(regs + S3C_PCM_CTL); - - switch (fmt & SND_SOC_DAIFMT_INV_MASK) { - case SND_SOC_DAIFMT_NB_NF: - /* Nothing to do, NB_NF by default */ - break; - default: - dev_err(pcm->dev, "Unsupported clock inversion!\n"); - ret = -EINVAL; - goto exit; - } - - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBS_CFS: - /* Nothing to do, Master by default */ - break; - default: - dev_err(pcm->dev, "Unsupported master/slave format!\n"); - ret = -EINVAL; - goto exit; - } - - switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) { - case SND_SOC_DAIFMT_CONT: - pcm->idleclk = 1; - break; - case SND_SOC_DAIFMT_GATED: - pcm->idleclk = 0; - break; - default: - dev_err(pcm->dev, "Invalid Clock gating request!\n"); - ret = -EINVAL; - goto exit; - } - - switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_DSP_A: - ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC; - ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC; - break; - case SND_SOC_DAIFMT_DSP_B: - ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC; - ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC; - break; - default: - dev_err(pcm->dev, "Unsupported data format!\n"); - ret = -EINVAL; - goto exit; - } - - writel(ctl, regs + S3C_PCM_CTL); - -exit: - spin_unlock_irqrestore(&pcm->lock, flags); - - return ret; -} - -static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai); - - switch (div_id) { - case S3C_PCM_SCLK_PER_FS: - pcm->sclk_per_fs = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - -static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai); - void __iomem *regs = pcm->regs; - u32 clkctl = readl(regs + S3C_PCM_CLKCTL); - - switch (clk_id) { - case S3C_PCM_CLKSRC_PCLK: - clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK; - break; - - case S3C_PCM_CLKSRC_MUX: - clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK; - - if (clk_get_rate(pcm->cclk) != freq) - clk_set_rate(pcm->cclk, freq); - - break; - - default: - return -EINVAL; - } - - writel(clkctl, regs + S3C_PCM_CLKCTL); - - return 0; -} - -static struct snd_soc_dai_ops s3c_pcm_dai_ops = { - .set_sysclk = s3c_pcm_set_sysclk, - .set_clkdiv = s3c_pcm_set_clkdiv, - .trigger = s3c_pcm_trigger, - .hw_params = s3c_pcm_hw_params, - .set_fmt = s3c_pcm_set_fmt, -}; - -#define S3C_PCM_RATES SNDRV_PCM_RATE_8000_96000 - -#define S3C_PCM_DAI_DECLARE \ - .symmetric_rates = 1, \ - .ops = &s3c_pcm_dai_ops, \ - .playback = { \ - .channels_min = 2, \ - .channels_max = 2, \ - .rates = S3C_PCM_RATES, \ - .formats = SNDRV_PCM_FMTBIT_S16_LE, \ - }, \ - .capture = { \ - .channels_min = 2, \ - .channels_max = 2, \ - .rates = S3C_PCM_RATES, \ - .formats = SNDRV_PCM_FMTBIT_S16_LE, \ - } - -struct snd_soc_dai_driver s3c_pcm_dai[] = { - [0] = { - .name = "samsung-pcm.0", - S3C_PCM_DAI_DECLARE, - }, - [1] = { - .name = "samsung-pcm.1", - S3C_PCM_DAI_DECLARE, - }, -}; -EXPORT_SYMBOL_GPL(s3c_pcm_dai); - -static __devinit int s3c_pcm_dev_probe(struct platform_device *pdev) -{ - struct s3c_pcm_info *pcm; - struct resource *mem_res, *dmatx_res, *dmarx_res; - struct s3c_audio_pdata *pcm_pdata; - int ret; - - /* Check for valid device index */ - if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) { - dev_err(&pdev->dev, "id %d out of range\n", pdev->id); - return -EINVAL; - } - - pcm_pdata = pdev->dev.platform_data; - - /* Check for availability of necessary resource */ - dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!dmatx_res) { - dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n"); - return -ENXIO; - } - - dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (!dmarx_res) { - dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n"); - return -ENXIO; - } - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - dev_err(&pdev->dev, "Unable to get register resource\n"); - return -ENXIO; - } - - if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) { - dev_err(&pdev->dev, "Unable to configure gpio\n"); - return -EINVAL; - } - - pcm = &s3c_pcm[pdev->id]; - pcm->dev = &pdev->dev; - - spin_lock_init(&pcm->lock); - - /* Default is 128fs */ - pcm->sclk_per_fs = 128; - - pcm->cclk = clk_get(&pdev->dev, "audio-bus"); - if (IS_ERR(pcm->cclk)) { - dev_err(&pdev->dev, "failed to get audio-bus\n"); - ret = PTR_ERR(pcm->cclk); - goto err1; - } - clk_enable(pcm->cclk); - - /* record our pcm structure for later use in the callbacks */ - dev_set_drvdata(&pdev->dev, pcm); - - if (!request_mem_region(mem_res->start, - resource_size(mem_res), "samsung-pcm")) { - dev_err(&pdev->dev, "Unable to request register region\n"); - ret = -EBUSY; - goto err2; - } - - pcm->regs = ioremap(mem_res->start, 0x100); - if (pcm->regs == NULL) { - dev_err(&pdev->dev, "cannot ioremap registers\n"); - ret = -ENXIO; - goto err3; - } - - pcm->pclk = clk_get(&pdev->dev, "pcm"); - if (IS_ERR(pcm->pclk)) { - dev_err(&pdev->dev, "failed to get pcm_clock\n"); - ret = -ENOENT; - goto err4; - } - clk_enable(pcm->pclk); - - ret = snd_soc_register_dai(&pdev->dev, &s3c_pcm_dai[pdev->id]); - if (ret != 0) { - dev_err(&pdev->dev, "failed to get pcm_clock\n"); - goto err5; - } - - s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start - + S3C_PCM_RXFIFO; - s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start - + S3C_PCM_TXFIFO; - - s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start; - s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start; - - pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id]; - pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id]; - - return 0; - -err5: - clk_disable(pcm->pclk); - clk_put(pcm->pclk); -err4: - iounmap(pcm->regs); -err3: - release_mem_region(mem_res->start, resource_size(mem_res)); -err2: - clk_disable(pcm->cclk); - clk_put(pcm->cclk); -err1: - return ret; -} - -static __devexit int s3c_pcm_dev_remove(struct platform_device *pdev) -{ - struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id]; - struct resource *mem_res; - - snd_soc_unregister_dai(&pdev->dev); - - iounmap(pcm->regs); - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem_res->start, resource_size(mem_res)); - - clk_disable(pcm->cclk); - clk_disable(pcm->pclk); - clk_put(pcm->pclk); - clk_put(pcm->cclk); - - return 0; -} - -static struct platform_driver s3c_pcm_driver = { - .probe = s3c_pcm_dev_probe, - .remove = s3c_pcm_dev_remove, - .driver = { - .name = "samsung-pcm", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c_pcm_init(void) -{ - return platform_driver_register(&s3c_pcm_driver); -} -module_init(s3c_pcm_init); - -static void __exit s3c_pcm_exit(void) -{ - platform_driver_unregister(&s3c_pcm_driver); -} -module_exit(s3c_pcm_exit); - -/* Module information */ -MODULE_AUTHOR("Jaswinder Singh, <jassi.brar(a)samsung.com>"); -MODULE_DESCRIPTION("S3C PCM Controller Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-pcm"); diff --git a/sound/soc/s3c24xx/pcm.h b/sound/soc/s3c24xx/pcm.h deleted file mode 100644 index 3775216..0000000 --- a/sound/soc/s3c24xx/pcm.h +++ /dev/null @@ -1,124 +0,0 @@ -/* sound/soc/s3c24xx/pcm.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __S3C_PCM_H -#define __S3C_PCM_H __FILE__ - -/*Register Offsets */ -#define S3C_PCM_CTL (0x00) -#define S3C_PCM_CLKCTL (0x04) -#define S3C_PCM_TXFIFO (0x08) -#define S3C_PCM_RXFIFO (0x0C) -#define S3C_PCM_IRQCTL (0x10) -#define S3C_PCM_IRQSTAT (0x14) -#define S3C_PCM_FIFOSTAT (0x18) -#define S3C_PCM_CLRINT (0x20) - -/* PCM_CTL Bit-Fields */ -#define S3C_PCM_CTL_TXDIPSTICK_MASK (0x3f) -#define S3C_PCM_CTL_TXDIPSTICK_SHIFT (13) -#define S3C_PCM_CTL_RXDIPSTICK_MASK (0x3f) -#define S3C_PCM_CTL_RXDIPSTICK_SHIFT (7) -#define S3C_PCM_CTL_TXDMA_EN (0x1<<6) -#define S3C_PCM_CTL_RXDMA_EN (0x1<<5) -#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC (0x1<<4) -#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC (0x1<<3) -#define S3C_PCM_CTL_TXFIFO_EN (0x1<<2) -#define S3C_PCM_CTL_RXFIFO_EN (0x1<<1) -#define S3C_PCM_CTL_ENABLE (0x1<<0) - -/* PCM_CLKCTL Bit-Fields */ -#define S3C_PCM_CLKCTL_SERCLK_EN (0x1<<19) -#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK (0x1<<18) -#define S3C_PCM_CLKCTL_SCLKDIV_MASK (0x1ff) -#define S3C_PCM_CLKCTL_SYNCDIV_MASK (0x1ff) -#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT (9) -#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT (0) - -/* PCM_TXFIFO Bit-Fields */ -#define S3C_PCM_TXFIFO_DVALID (0x1<<16) -#define S3C_PCM_TXFIFO_DATA_MSK (0xffff<<0) - -/* PCM_RXFIFO Bit-Fields */ -#define S3C_PCM_RXFIFO_DVALID (0x1<<16) -#define S3C_PCM_RXFIFO_DATA_MSK (0xffff<<0) - -/* PCM_IRQCTL Bit-Fields */ -#define S3C_PCM_IRQCTL_IRQEN (0x1<<14) -#define S3C_PCM_IRQCTL_WRDEN (0x1<<12) -#define S3C_PCM_IRQCTL_TXEMPTYEN (0x1<<11) -#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN (0x1<<10) -#define S3C_PCM_IRQCTL_TXFULLEN (0x1<<9) -#define S3C_PCM_IRQCTL_TXALMSTFULLEN (0x1<<8) -#define S3C_PCM_IRQCTL_TXSTARVEN (0x1<<7) -#define S3C_PCM_IRQCTL_TXERROVRFLEN (0x1<<6) -#define S3C_PCM_IRQCTL_RXEMPTEN (0x1<<5) -#define S3C_PCM_IRQCTL_RXALMSTEMPTEN (0x1<<4) -#define S3C_PCM_IRQCTL_RXFULLEN (0x1<<3) -#define S3C_PCM_IRQCTL_RXALMSTFULLEN (0x1<<2) -#define S3C_PCM_IRQCTL_RXSTARVEN (0x1<<1) -#define S3C_PCM_IRQCTL_RXERROVRFLEN (0x1<<0) - -/* PCM_IRQSTAT Bit-Fields */ -#define S3C_PCM_IRQSTAT_IRQPND (0x1<<13) -#define S3C_PCM_IRQSTAT_WRD_XFER (0x1<<12) -#define S3C_PCM_IRQSTAT_TXEMPTY (0x1<<11) -#define S3C_PCM_IRQSTAT_TXALMSTEMPTY (0x1<<10) -#define S3C_PCM_IRQSTAT_TXFULL (0x1<<9) -#define S3C_PCM_IRQSTAT_TXALMSTFULL (0x1<<8) -#define S3C_PCM_IRQSTAT_TXSTARV (0x1<<7) -#define S3C_PCM_IRQSTAT_TXERROVRFL (0x1<<6) -#define S3C_PCM_IRQSTAT_RXEMPT (0x1<<5) -#define S3C_PCM_IRQSTAT_RXALMSTEMPT (0x1<<4) -#define S3C_PCM_IRQSTAT_RXFULL (0x1<<3) -#define S3C_PCM_IRQSTAT_RXALMSTFULL (0x1<<2) -#define S3C_PCM_IRQSTAT_RXSTARV (0x1<<1) -#define S3C_PCM_IRQSTAT_RXERROVRFL (0x1<<0) - -/* PCM_FIFOSTAT Bit-Fields */ -#define S3C_PCM_FIFOSTAT_TXCNT_MSK (0x3f<<14) -#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY (0x1<<13) -#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY (0x1<<12) -#define S3C_PCM_FIFOSTAT_TXFIFOFULL (0x1<<11) -#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL (0x1<<10) -#define S3C_PCM_FIFOSTAT_RXCNT_MSK (0x3f<<4) -#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY (0x1<<3) -#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY (0x1<<2) -#define S3C_PCM_FIFOSTAT_RXFIFOFULL (0x1<<1) -#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL (0x1<<0) - -#define S3C_PCM_CLKSRC_PCLK 0 -#define S3C_PCM_CLKSRC_MUX 1 - -#define S3C_PCM_SCLK_PER_FS 0 - -/** - * struct s3c_pcm_info - S3C PCM Controller information - * @dev: The parent device passed to use from the probe. - * @regs: The pointer to the device register block. - * @dma_playback: DMA information for playback channel. - * @dma_capture: DMA information for capture channel. - */ -struct s3c_pcm_info { - spinlock_t lock; - struct device *dev; - void __iomem *regs; - - unsigned int sclk_per_fs; - - /* Whether to keep PCMSCLK enabled even when idle(no active xfer) */ - unsigned int idleclk; - - struct clk *pclk; - struct clk *cclk; - - struct s3c_dma_params *dma_playback; - struct s3c_dma_params *dma_capture; -}; - -#endif /* __S3C_PCM_H */ diff --git a/sound/soc/s3c24xx/regs-i2s-v2.h b/sound/soc/s3c24xx/regs-i2s-v2.h deleted file mode 100644 index 5e5e568..0000000 --- a/sound/soc/s3c24xx/regs-i2s-v2.h +++ /dev/null @@ -1,115 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h - * - * Copyright 2007 Simtec Electronics <linux(a)simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H -#define __ASM_ARCH_REGS_S3C2412_IIS_H - -#define S3C2412_IISCON (0x00) -#define S3C2412_IISMOD (0x04) -#define S3C2412_IISFIC (0x08) -#define S3C2412_IISPSR (0x0C) -#define S3C2412_IISTXD (0x10) -#define S3C2412_IISRXD (0x14) - -#define S5PC1XX_IISFICS 0x18 -#define S5PC1XX_IISTXDS 0x1C - -#define S5PC1XX_IISCON_SW_RST (1 << 31) -#define S5PC1XX_IISCON_FRXOFSTATUS (1 << 26) -#define S5PC1XX_IISCON_FRXORINTEN (1 << 25) -#define S5PC1XX_IISCON_FTXSURSTAT (1 << 24) -#define S5PC1XX_IISCON_FTXSURINTEN (1 << 23) -#define S5PC1XX_IISCON_TXSDMAPAUSE (1 << 20) -#define S5PC1XX_IISCON_TXSDMACTIVE (1 << 18) - -#define S3C64XX_IISCON_FTXURSTATUS (1 << 17) -#define S3C64XX_IISCON_FTXURINTEN (1 << 16) -#define S3C64XX_IISCON_TXFIFO2_EMPTY (1 << 15) -#define S3C64XX_IISCON_TXFIFO1_EMPTY (1 << 14) -#define S3C64XX_IISCON_TXFIFO2_FULL (1 << 13) -#define S3C64XX_IISCON_TXFIFO1_FULL (1 << 12) - -#define S3C2412_IISCON_LRINDEX (1 << 11) -#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) -#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) -#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) -#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) -#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) -#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) -#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) -#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) -#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) -#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) -#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) - -#define S5PC1XX_IISMOD_OPCLK_CDCLK_OUT (0 << 30) -#define S5PC1XX_IISMOD_OPCLK_CDCLK_IN (1 << 30) -#define S5PC1XX_IISMOD_OPCLK_BCLK_OUT (2 << 30) -#define S5PC1XX_IISMOD_OPCLK_PCLK (3 << 30) -#define S5PC1XX_IISMOD_OPCLK_MASK (3 << 30) -#define S5PC1XX_IISMOD_TXS_IDMA (1 << 28) /* Sec_TXFIFO use I-DMA */ -#define S5PC1XX_IISMOD_BLCS_MASK 0x3 -#define S5PC1XX_IISMOD_BLCS_SHIFT 26 -#define S5PC1XX_IISMOD_BLCP_MASK 0x3 -#define S5PC1XX_IISMOD_BLCP_SHIFT 24 - -#define S3C64XX_IISMOD_C2DD_HHALF (1 << 21) /* Discard Higher-half */ -#define S3C64XX_IISMOD_C2DD_LHALF (1 << 20) /* Discard Lower-half */ -#define S3C64XX_IISMOD_C1DD_HHALF (1 << 19) -#define S3C64XX_IISMOD_C1DD_LHALF (1 << 18) -#define S3C64XX_IISMOD_DC2_EN (1 << 17) -#define S3C64XX_IISMOD_DC1_EN (1 << 16) -#define S3C64XX_IISMOD_BLC_16BIT (0 << 13) -#define S3C64XX_IISMOD_BLC_8BIT (1 << 13) -#define S3C64XX_IISMOD_BLC_24BIT (2 << 13) -#define S3C64XX_IISMOD_BLC_MASK (3 << 13) - -#define S3C2412_IISMOD_IMS_SYSMUX (1 << 10) -#define S3C2412_IISMOD_SLAVE (1 << 11) -#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) -#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) -#define S3C2412_IISMOD_MODE_TXRX (2 << 8) -#define S3C2412_IISMOD_MODE_MASK (3 << 8) -#define S3C2412_IISMOD_LR_LLOW (0 << 7) -#define S3C2412_IISMOD_LR_RLOW (1 << 7) -#define S3C2412_IISMOD_SDF_IIS (0 << 5) -#define S3C2412_IISMOD_SDF_MSB (1 << 5) -#define S3C2412_IISMOD_SDF_LSB (2 << 5) -#define S3C2412_IISMOD_SDF_MASK (3 << 5) -#define S3C2412_IISMOD_RCLK_256FS (0 << 3) -#define S3C2412_IISMOD_RCLK_512FS (1 << 3) -#define S3C2412_IISMOD_RCLK_384FS (2 << 3) -#define S3C2412_IISMOD_RCLK_768FS (3 << 3) -#define S3C2412_IISMOD_RCLK_MASK (3 << 3) -#define S3C2412_IISMOD_BCLK_32FS (0 << 1) -#define S3C2412_IISMOD_BCLK_48FS (1 << 1) -#define S3C2412_IISMOD_BCLK_16FS (2 << 1) -#define S3C2412_IISMOD_BCLK_24FS (3 << 1) -#define S3C2412_IISMOD_BCLK_MASK (3 << 1) -#define S3C2412_IISMOD_8BIT (1 << 0) - -#define S3C64XX_IISMOD_CDCLKCON (1 << 12) - -#define S3C2412_IISPSR_PSREN (1 << 15) - -#define S3C64XX_IISFIC_TX2COUNT(x) (((x) >> 24) & 0xf) -#define S3C64XX_IISFIC_TX1COUNT(x) (((x) >> 16) & 0xf) - -#define S3C2412_IISFIC_TXFLUSH (1 << 15) -#define S3C2412_IISFIC_RXFLUSH (1 << 7) -#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) -#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) - -#define S5PC1XX_IISFICS_TXFLUSH (1 << 15) -#define S5PC1XX_IISFICS_TXCOUNT(x) (((x) >> 8) & 0x7f) - -#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c deleted file mode 100644 index 07197ee..0000000 --- a/sound/soc/s3c24xx/rx1950_uda1380.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * rx1950.c -- ALSA Soc Audio Layer - * - * Copyright (c) 2010 Vasily Khoruzhick <anarsoul(a)gmail.com> - * - * Based on smdk2440.c and magician.c - * - * Authors: Graeme Gregory graeme.gregory(a)wolfsonmicro.com - * Philipp Zabel <philipp.zabel(a)gmail.com> - * Denis Grigoriev <dgreenday(a)gmail.com> - * Vasily Khoruzhick <anarsoul(a)gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/clk.h> - -#include <sound/soc.h> -#include <sound/soc-dapm.h> -#include <sound/uda1380.h> -#include <sound/jack.h> - -#include <plat/regs-iis.h> - -#include <mach/regs-clock.h> - -#include <asm/mach-types.h> - -#include "dma.h" -#include "s3c24xx-i2s.h" -#include "../codecs/uda1380.h" - -static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd); -static int rx1950_startup(struct snd_pcm_substream *substream); -static int rx1950_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params); -static int rx1950_spk_power(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event); - -static unsigned int rates[] = { - 16000, - 44100, - 48000, - 88200, -}; - -static struct snd_pcm_hw_constraint_list hw_rates = { - .count = ARRAY_SIZE(rates), - .list = rates, - .mask = 0, -}; - -static struct snd_soc_jack hp_jack; - -static struct snd_soc_jack_pin hp_jack_pins[] = { - { - .pin = "Headphone Jack", - .mask = SND_JACK_HEADPHONE, - }, - { - .pin = "Speaker", - .mask = SND_JACK_HEADPHONE, - .invert = 1, - }, -}; - -static struct snd_soc_jack_gpio hp_jack_gpios[] = { - [0] = { - .gpio = S3C2410_GPG(12), - .name = "hp-gpio", - .report = SND_JACK_HEADPHONE, - .invert = 1, - .debounce_time = 200, - }, -}; - -static struct snd_soc_ops rx1950_ops = { - .startup = rx1950_startup, - .hw_params = rx1950_hw_params, -}; - -/* s3c24xx digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link rx1950_uda1380_dai[] = { - { - .name = "uda1380", - .stream_name = "UDA1380 Duplex", - .cpu_dai_name = "s3c24xx-iis", - .codec_dai_name = "uda1380-hifi", - .init = rx1950_uda1380_init, - .platform_name = "samsung-audio", - .codec_name = "uda1380-codec.0-001a", - .ops = &rx1950_ops, - }, -}; - -static struct snd_soc_card rx1950_asoc = { - .name = "rx1950", - .dai_link = rx1950_uda1380_dai, - .num_links = ARRAY_SIZE(rx1950_uda1380_dai), -}; - -/* rx1950 machine dapm widgets */ -static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = { - SND_SOC_DAPM_HP("Headphone Jack", NULL), - SND_SOC_DAPM_MIC("Mic Jack", NULL), - SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power), -}; - -/* rx1950 machine audio_map */ -static const struct snd_soc_dapm_route audio_map[] = { - /* headphone connected to VOUTLHP, VOUTRHP */ - {"Headphone Jack", NULL, "VOUTLHP"}, - {"Headphone Jack", NULL, "VOUTRHP"}, - - /* ext speaker connected to VOUTL, VOUTR */ - {"Speaker", NULL, "VOUTL"}, - {"Speaker", NULL, "VOUTR"}, - - /* mic is connected to VINM */ - {"VINM", NULL, "Mic Jack"}, -}; - -static struct platform_device *s3c24xx_snd_device; -static struct clk *xtal; - -static int rx1950_startup(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - - runtime->hw.rate_min = hw_rates.list[0]; - runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1]; - runtime->hw.rates = SNDRV_PCM_RATE_KNOT; - - return snd_pcm_hw_constraint_list(runtime, 0, - SNDRV_PCM_HW_PARAM_RATE, - &hw_rates); -} - -static int rx1950_spk_power(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - if (SND_SOC_DAPM_EVENT_ON(event)) - gpio_set_value(S3C2410_GPA(1), 1); - else - gpio_set_value(S3C2410_GPA(1), 0); - - return 0; -} - -static int rx1950_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - int div; - int ret; - unsigned int rate = params_rate(params); - int clk_source, fs_mode; - - switch (rate) { - case 16000: - case 48000: - clk_source = S3C24XX_CLKSRC_PCLK; - fs_mode = S3C2410_IISMOD_256FS; - div = s3c24xx_i2s_get_clockrate() / (256 * rate); - if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate)) - div++; - break; - case 44100: - case 88200: - clk_source = S3C24XX_CLKSRC_MPLL; - fs_mode = S3C2410_IISMOD_256FS; - div = clk_get_rate(xtal) / (256 * rate); - if (clk_get_rate(xtal) % (256 * rate) > (128 * rate)) - div++; - break; - default: - printk(KERN_ERR "%s: rate %d is not supported\n", - __func__, rate); - return -EINVAL; - } - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* select clock source */ - ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate, - SND_SOC_CLOCK_OUT); - if (ret < 0) - return ret; - - /* set MCLK division for sample rate */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, - S3C2410_IISMOD_384FS); - if (ret < 0) - return ret; - - /* set BCLK division for sample rate */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK, - S3C2410_IISMOD_32FS); - if (ret < 0) - return ret; - - /* set prescaler division for sample rate */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, - S3C24XX_PRESCALE(div, div)); - if (ret < 0) - return ret; - - return 0; -} - -static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - int err; - - /* Add rx1950 specific widgets */ - err = snd_soc_dapm_new_controls(codec, uda1380_dapm_widgets, - ARRAY_SIZE(uda1380_dapm_widgets)); - - if (err) - return err; - - /* Set up rx1950 specific audio path audio_mapnects */ - err = snd_soc_dapm_add_routes(codec, audio_map, - ARRAY_SIZE(audio_map)); - - if (err) - return err; - - snd_soc_dapm_enable_pin(codec, "Headphone Jack"); - snd_soc_dapm_enable_pin(codec, "Speaker"); - - snd_soc_dapm_sync(codec); - - snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE, - &hp_jack); - - snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins), - hp_jack_pins); - - snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), - hp_jack_gpios); - - return 0; -} - -static int __init rx1950_init(void) -{ - int ret; - - if (!machine_is_rx1950()) - return -ENODEV; - - /* configure some gpios */ - ret = gpio_request(S3C2410_GPA(1), "speaker-power"); - if (ret) - goto err_gpio; - - ret = gpio_direction_output(S3C2410_GPA(1), 0); - if (ret) - goto err_gpio_conf; - - s3c24xx_snd_device = platform_device_alloc("soc-audio", -1); - if (!s3c24xx_snd_device) { - ret = -ENOMEM; - goto err_plat_alloc; - } - - platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc); - ret = platform_device_add(s3c24xx_snd_device); - - if (ret) { - platform_device_put(s3c24xx_snd_device); - goto err_plat_add; - } - - xtal = clk_get(&s3c24xx_snd_device->dev, "xtal"); - - if (IS_ERR(xtal)) { - ret = PTR_ERR(xtal); - platform_device_unregister(s3c24xx_snd_device); - goto err_clk; - } - - return 0; - -err_clk: -err_plat_add: -err_plat_alloc: -err_gpio_conf: - gpio_free(S3C2410_GPA(1)); - -err_gpio: - return ret; -} - -static void __exit rx1950_exit(void) -{ - platform_device_unregister(s3c24xx_snd_device); - snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), - hp_jack_gpios); - clk_put(xtal); - gpio_free(S3C2410_GPA(1)); -} - -module_init(rx1950_init); -module_exit(rx1950_exit); - -/* Module information */ -MODULE_AUTHOR("Vasily Khoruzhick"); -MODULE_DESCRIPTION("ALSA SoC RX1950"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c deleted file mode 100644 index c471431..0000000 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ /dev/null @@ -1,757 +0,0 @@ -/* sound/soc/s3c24xx/s3c-i2c-v2.c - * - * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs. - * - * Copyright (c) 2006 Wolfson Microelectronics PLC. - * Graeme Gregory graeme.gregory(a)wolfsonmicro.com - * linux(a)wolfsonmicro.com - * - * Copyright (c) 2008, 2007, 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben(a)simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <mach/dma.h> - -#include "regs-i2s-v2.h" -#include "s3c-i2s-v2.h" -#include "dma.h" - -#undef S3C_IIS_V2_SUPPORTED - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \ - || defined(CONFIG_CPU_S5PV210) -#define S3C_IIS_V2_SUPPORTED -#endif - -#ifdef CONFIG_PLAT_S3C64XX -#define S3C_IIS_V2_SUPPORTED -#endif - -#ifndef S3C_IIS_V2_SUPPORTED -#error Unsupported CPU model -#endif - -#define S3C2412_I2S_DEBUG_CON 0 - -static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) -{ - return snd_soc_dai_get_drvdata(cpu_dai); -} - -#define bit_set(v, b) (((v) & (b)) ? 1 : 0) - -#if S3C2412_I2S_DEBUG_CON -static void dbg_showcon(const char *fn, u32 con) -{ - printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn, - bit_set(con, S3C2412_IISCON_LRINDEX), - bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY), - bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY), - bit_set(con, S3C2412_IISCON_TXFIFO_FULL), - bit_set(con, S3C2412_IISCON_RXFIFO_FULL)); - - printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n", - fn, - bit_set(con, S3C2412_IISCON_TXDMA_PAUSE), - bit_set(con, S3C2412_IISCON_RXDMA_PAUSE), - bit_set(con, S3C2412_IISCON_TXCH_PAUSE), - bit_set(con, S3C2412_IISCON_RXCH_PAUSE)); - printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn, - bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE), - bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE), - bit_set(con, S3C2412_IISCON_IIS_ACTIVE)); -} -#else -static inline void dbg_showcon(const char *fn, u32 con) -{ -} -#endif - - -/* Turn on or off the transmission path. */ -static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) -{ - void __iomem *regs = i2s->regs; - u32 fic, con, mod; - - pr_debug("%s(%d)\n", __func__, on); - - fic = readl(regs + S3C2412_IISFIC); - con = readl(regs + S3C2412_IISCON); - mod = readl(regs + S3C2412_IISMOD); - - pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); - - if (on) { - con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; - con &= ~S3C2412_IISCON_TXDMA_PAUSE; - con &= ~S3C2412_IISCON_TXCH_PAUSE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_TXONLY: - case S3C2412_IISMOD_MODE_TXRX: - /* do nothing, we are in the right mode */ - break; - - case S3C2412_IISMOD_MODE_RXONLY: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_TXRX; - break; - - default: - dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n", - mod & S3C2412_IISMOD_MODE_MASK); - break; - } - - writel(con, regs + S3C2412_IISCON); - writel(mod, regs + S3C2412_IISMOD); - } else { - /* Note, we do not have any indication that the FIFO problems - * tha the S3C2410/2440 had apply here, so we should be able - * to disable the DMA and TX without resetting the FIFOS. - */ - - con |= S3C2412_IISCON_TXDMA_PAUSE; - con |= S3C2412_IISCON_TXCH_PAUSE; - con &= ~S3C2412_IISCON_TXDMA_ACTIVE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_TXRX: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_RXONLY; - break; - - case S3C2412_IISMOD_MODE_TXONLY: - mod &= ~S3C2412_IISMOD_MODE_MASK; - con &= ~S3C2412_IISCON_IIS_ACTIVE; - break; - - default: - dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n", - mod & S3C2412_IISMOD_MODE_MASK); - break; - } - - writel(mod, regs + S3C2412_IISMOD); - writel(con, regs + S3C2412_IISCON); - } - - fic = readl(regs + S3C2412_IISFIC); - dbg_showcon(__func__, con); - pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); -} - -static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) -{ - void __iomem *regs = i2s->regs; - u32 fic, con, mod; - - pr_debug("%s(%d)\n", __func__, on); - - fic = readl(regs + S3C2412_IISFIC); - con = readl(regs + S3C2412_IISCON); - mod = readl(regs + S3C2412_IISMOD); - - pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); - - if (on) { - con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; - con &= ~S3C2412_IISCON_RXDMA_PAUSE; - con &= ~S3C2412_IISCON_RXCH_PAUSE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_TXRX: - case S3C2412_IISMOD_MODE_RXONLY: - /* do nothing, we are in the right mode */ - break; - - case S3C2412_IISMOD_MODE_TXONLY: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_TXRX; - break; - - default: - dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n", - mod & S3C2412_IISMOD_MODE_MASK); - } - - writel(mod, regs + S3C2412_IISMOD); - writel(con, regs + S3C2412_IISCON); - } else { - /* See txctrl notes on FIFOs. */ - - con &= ~S3C2412_IISCON_RXDMA_ACTIVE; - con |= S3C2412_IISCON_RXDMA_PAUSE; - con |= S3C2412_IISCON_RXCH_PAUSE; - - switch (mod & S3C2412_IISMOD_MODE_MASK) { - case S3C2412_IISMOD_MODE_RXONLY: - con &= ~S3C2412_IISCON_IIS_ACTIVE; - mod &= ~S3C2412_IISMOD_MODE_MASK; - break; - - case S3C2412_IISMOD_MODE_TXRX: - mod &= ~S3C2412_IISMOD_MODE_MASK; - mod |= S3C2412_IISMOD_MODE_TXONLY; - break; - - default: - dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n", - mod & S3C2412_IISMOD_MODE_MASK); - } - - writel(con, regs + S3C2412_IISCON); - writel(mod, regs + S3C2412_IISMOD); - } - - fic = readl(regs + S3C2412_IISFIC); - pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); -} - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) - -/* - * Wait for the LR signal to allow synchronisation to the L/R clock - * from the codec. May only be needed for slave mode. - */ -static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s) -{ - u32 iiscon; - unsigned long loops = msecs_to_loops(5); - - pr_debug("Entered %s\n", __func__); - - while (--loops) { - iiscon = readl(i2s->regs + S3C2412_IISCON); - if (iiscon & S3C2412_IISCON_LRINDEX) - break; - - cpu_relax(); - } - - if (!loops) { - printk(KERN_ERR "%s: timeout\n", __func__); - return -ETIMEDOUT; - } - - return 0; -} - -/* - * Set S3C2412 I2S DAI format - */ -static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct s3c_i2sv2_info *i2s = to_info(cpu_dai); - u32 iismod; - - pr_debug("Entered %s\n", __func__); - - iismod = readl(i2s->regs + S3C2412_IISMOD); - pr_debug("hw_params r: IISMOD: %x \n", iismod); - - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBM_CFM: - i2s->master = 0; - iismod |= S3C2412_IISMOD_SLAVE; - break; - case SND_SOC_DAIFMT_CBS_CFS: - i2s->master = 1; - iismod &= ~S3C2412_IISMOD_SLAVE; - break; - default: - pr_err("unknwon master/slave format\n"); - return -EINVAL; - } - - iismod &= ~S3C2412_IISMOD_SDF_MASK; - - switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_RIGHT_J: - iismod |= S3C2412_IISMOD_LR_RLOW; - iismod |= S3C2412_IISMOD_SDF_MSB; - break; - case SND_SOC_DAIFMT_LEFT_J: - iismod |= S3C2412_IISMOD_LR_RLOW; - iismod |= S3C2412_IISMOD_SDF_LSB; - break; - case SND_SOC_DAIFMT_I2S: - iismod &= ~S3C2412_IISMOD_LR_RLOW; - iismod |= S3C2412_IISMOD_SDF_IIS; - break; - default: - pr_err("Unknown data format\n"); - return -EINVAL; - } - - writel(iismod, i2s->regs + S3C2412_IISMOD); - pr_debug("hw_params w: IISMOD: %x \n", iismod); - return 0; -} - -static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct s3c_i2sv2_info *i2s = to_info(dai); - struct s3c_dma_params *dma_data; - u32 iismod; - - pr_debug("Entered %s\n", __func__); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = i2s->dma_playback; - else - dma_data = i2s->dma_capture; - - snd_soc_dai_set_dma_data(dai, substream, dma_data); - - /* Working copies of register */ - iismod = readl(i2s->regs + S3C2412_IISMOD); - pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); - - iismod &= ~S3C64XX_IISMOD_BLC_MASK; - /* Sample size */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - iismod |= S3C64XX_IISMOD_BLC_8BIT; - break; - case SNDRV_PCM_FORMAT_S16_LE: - break; - case SNDRV_PCM_FORMAT_S24_LE: - iismod |= S3C64XX_IISMOD_BLC_24BIT; - break; - } - - writel(iismod, i2s->regs + S3C2412_IISMOD); - pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); - - return 0; -} - -static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - struct s3c_i2sv2_info *i2s = to_info(cpu_dai); - u32 iismod = readl(i2s->regs + S3C2412_IISMOD); - - pr_debug("Entered %s\n", __func__); - pr_debug("%s r: IISMOD: %x\n", __func__, iismod); - - switch (clk_id) { - case S3C_I2SV2_CLKSRC_PCLK: - iismod &= ~S3C2412_IISMOD_IMS_SYSMUX; - break; - - case S3C_I2SV2_CLKSRC_AUDIOBUS: - iismod |= S3C2412_IISMOD_IMS_SYSMUX; - break; - - case S3C_I2SV2_CLKSRC_CDCLK: - /* Error if controller doesn't have the CDCLKCON bit */ - if (!(i2s->feature & S3C_FEATURE_CDCLKCON)) - return -EINVAL; - - switch (dir) { - case SND_SOC_CLOCK_IN: - iismod |= S3C64XX_IISMOD_CDCLKCON; - break; - case SND_SOC_CLOCK_OUT: - iismod &= ~S3C64XX_IISMOD_CDCLKCON; - break; - default: - return -EINVAL; - } - break; - - default: - return -EINVAL; - } - - writel(iismod, i2s->regs + S3C2412_IISMOD); - pr_debug("%s w: IISMOD: %x\n", __func__, iismod); - - return 0; -} - -static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct s3c_i2sv2_info *i2s = to_info(rtd->cpu_dai); - int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); - unsigned long irqs; - int ret = 0; - struct s3c_dma_params *dma_data = - snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - - pr_debug("Entered %s\n", __func__); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - /* On start, ensure that the FIFOs are cleared and reset. */ - - writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH, - i2s->regs + S3C2412_IISFIC); - - /* clear again, just in case */ - writel(0x0, i2s->regs + S3C2412_IISFIC); - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - if (!i2s->master) { - ret = s3c2412_snd_lrsync(i2s); - if (ret) - goto exit_err; - } - - local_irq_save(irqs); - - if (capture) - s3c2412_snd_rxctrl(i2s, 1); - else - s3c2412_snd_txctrl(i2s, 1); - - local_irq_restore(irqs); - - /* - * Load the next buffer to DMA to meet the reqirement - * of the auto reload mechanism of S3C24XX. - * This call won't bother S3C64XX. - */ - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); - - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - local_irq_save(irqs); - - if (capture) - s3c2412_snd_rxctrl(i2s, 0); - else - s3c2412_snd_txctrl(i2s, 0); - - local_irq_restore(irqs); - break; - default: - ret = -EINVAL; - break; - } - -exit_err: - return ret; -} - -/* - * Set S3C2412 Clock dividers - */ -static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct s3c_i2sv2_info *i2s = to_info(cpu_dai); - u32 reg; - - pr_debug("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div); - - switch (div_id) { - case S3C_I2SV2_DIV_BCLK: - switch (div) { - case 16: - div = S3C2412_IISMOD_BCLK_16FS; - break; - - case 32: - div = S3C2412_IISMOD_BCLK_32FS; - break; - - case 24: - div = S3C2412_IISMOD_BCLK_24FS; - break; - - case 48: - div = S3C2412_IISMOD_BCLK_48FS; - break; - - default: - return -EINVAL; - } - - reg = readl(i2s->regs + S3C2412_IISMOD); - reg &= ~S3C2412_IISMOD_BCLK_MASK; - writel(reg | div, i2s->regs + S3C2412_IISMOD); - - pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); - break; - - case S3C_I2SV2_DIV_RCLK: - switch (div) { - case 256: - div = S3C2412_IISMOD_RCLK_256FS; - break; - - case 384: - div = S3C2412_IISMOD_RCLK_384FS; - break; - - case 512: - div = S3C2412_IISMOD_RCLK_512FS; - break; - - case 768: - div = S3C2412_IISMOD_RCLK_768FS; - break; - - default: - return -EINVAL; - } - - reg = readl(i2s->regs + S3C2412_IISMOD); - reg &= ~S3C2412_IISMOD_RCLK_MASK; - writel(reg | div, i2s->regs + S3C2412_IISMOD); - pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); - break; - - case S3C_I2SV2_DIV_PRESCALER: - if (div >= 0) { - writel((div << 8) | S3C2412_IISPSR_PSREN, - i2s->regs + S3C2412_IISPSR); - } else { - writel(0x0, i2s->regs + S3C2412_IISPSR); - } - pr_debug("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR)); - break; - - default: - return -EINVAL; - } - - return 0; -} - -static snd_pcm_sframes_t s3c2412_i2s_delay(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct s3c_i2sv2_info *i2s = to_info(dai); - u32 reg = readl(i2s->regs + S3C2412_IISFIC); - snd_pcm_sframes_t delay; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - delay = S3C2412_IISFIC_TXCOUNT(reg); - else - delay = S3C2412_IISFIC_RXCOUNT(reg); - - return delay; -} - -struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai) -{ - struct s3c_i2sv2_info *i2s = to_info(cpu_dai); - u32 iismod = readl(i2s->regs + S3C2412_IISMOD); - - if (iismod & S3C2412_IISMOD_IMS_SYSMUX) - return i2s->iis_cclk; - else - return i2s->iis_pclk; -} -EXPORT_SYMBOL_GPL(s3c_i2sv2_get_clock); - -/* default table of all avaialable root fs divisors */ -static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 }; - -int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, - unsigned int *fstab, - unsigned int rate, struct clk *clk) -{ - unsigned long clkrate = clk_get_rate(clk); - unsigned int div; - unsigned int fsclk; - unsigned int actual; - unsigned int fs; - unsigned int fsdiv; - signed int deviation = 0; - unsigned int best_fs = 0; - unsigned int best_div = 0; - unsigned int best_rate = 0; - unsigned int best_deviation = INT_MAX; - - pr_debug("Input clock rate %ldHz\n", clkrate); - - if (fstab == NULL) - fstab = iis_fs_tab; - - for (fs = 0; fs < ARRAY_SIZE(iis_fs_tab); fs++) { - fsdiv = iis_fs_tab[fs]; - - fsclk = clkrate / fsdiv; - div = fsclk / rate; - - if ((fsclk % rate) > (rate / 2)) - div++; - - if (div <= 1) - continue; - - actual = clkrate / (fsdiv * div); - deviation = actual - rate; - - printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n", - fsdiv, div, actual, deviation); - - deviation = abs(deviation); - - if (deviation < best_deviation) { - best_fs = fsdiv; - best_div = div; - best_rate = actual; - best_deviation = deviation; - } - - if (deviation == 0) - break; - } - - printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n", - best_fs, best_div, best_rate); - - info->fs_div = best_fs; - info->clk_div = best_div; - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate); - -int s3c_i2sv2_probe(struct snd_soc_dai *dai, - struct s3c_i2sv2_info *i2s, - unsigned long base) -{ - struct device *dev = dai->dev; - unsigned int iismod; - - i2s->dev = dev; - - /* record our i2s structure for later use in the callbacks */ - snd_soc_dai_set_drvdata(dai, i2s); - - i2s->regs = ioremap(base, 0x100); - if (i2s->regs == NULL) { - dev_err(dev, "cannot ioremap registers\n"); - return -ENXIO; - } - - i2s->iis_pclk = clk_get(dev, "iis"); - if (IS_ERR(i2s->iis_pclk)) { - dev_err(dev, "failed to get iis_clock\n"); - iounmap(i2s->regs); - return -ENOENT; - } - - clk_enable(i2s->iis_pclk); - - /* Mark ourselves as in TXRX mode so we can run through our cleanup - * process without warnings. */ - iismod = readl(i2s->regs + S3C2412_IISMOD); - iismod |= S3C2412_IISMOD_MODE_TXRX; - writel(iismod, i2s->regs + S3C2412_IISMOD); - s3c2412_snd_txctrl(i2s, 0); - s3c2412_snd_rxctrl(i2s, 0); - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_i2sv2_probe); - -#ifdef CONFIG_PM -static int s3c2412_i2s_suspend(struct snd_soc_dai *dai) -{ - struct s3c_i2sv2_info *i2s = to_info(dai); - u32 iismod; - - if (dai->active) { - i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD); - i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON); - i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR); - - /* some basic suspend checks */ - - iismod = readl(i2s->regs + S3C2412_IISMOD); - - if (iismod & S3C2412_IISCON_RXDMA_ACTIVE) - pr_warning("%s: RXDMA active?\n", __func__); - - if (iismod & S3C2412_IISCON_TXDMA_ACTIVE) - pr_warning("%s: TXDMA active?\n", __func__); - - if (iismod & S3C2412_IISCON_IIS_ACTIVE) - pr_warning("%s: IIS active\n", __func__); - } - - return 0; -} - -static int s3c2412_i2s_resume(struct snd_soc_dai *dai) -{ - struct s3c_i2sv2_info *i2s = to_info(dai); - - pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n", - dai->active, i2s->suspend_iismod, i2s->suspend_iiscon); - - if (dai->active) { - writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON); - writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD); - writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR); - - writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH, - i2s->regs + S3C2412_IISFIC); - - ndelay(250); - writel(0x0, i2s->regs + S3C2412_IISFIC); - } - - return 0; -} -#else -#define s3c2412_i2s_suspend NULL -#define s3c2412_i2s_resume NULL -#endif - -int s3c_i2sv2_register_dai(struct device *dev, int id, - struct snd_soc_dai_driver *drv) -{ - struct snd_soc_dai_ops *ops = drv->ops; - - ops->trigger = s3c2412_i2s_trigger; - if (!ops->hw_params) - ops->hw_params = s3c_i2sv2_hw_params; - ops->set_fmt = s3c2412_i2s_set_fmt; - ops->set_clkdiv = s3c2412_i2s_set_clkdiv; - ops->set_sysclk = s3c_i2sv2_set_sysclk; - - /* Allow overriding by (for example) IISv4 */ - if (!ops->delay) - ops->delay = s3c2412_i2s_delay; - - drv->suspend = s3c2412_i2s_suspend; - drv->resume = s3c2412_i2s_resume; - - return snd_soc_register_dai(dev, drv); -} -EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai); - -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.h b/sound/soc/s3c24xx/s3c-i2s-v2.h deleted file mode 100644 index d458301..0000000 --- a/sound/soc/s3c24xx/s3c-i2s-v2.h +++ /dev/null @@ -1,106 +0,0 @@ -/* sound/soc/s3c24xx/s3c-i2s-v2.h - * - * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver - * - * Copyright (c) 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben(a)simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. -*/ - -/* This code is the core support for the I2S block found in a number of - * Samsung SoC devices which is unofficially named I2S-V2. Currently the - * S3C2412 and the S3C64XX series use this block to provide 1 or 2 I2S - * channels via configurable GPIO. - */ - -#ifndef __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H -#define __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H __FILE__ - -#define S3C_I2SV2_DIV_BCLK (1) -#define S3C_I2SV2_DIV_RCLK (2) -#define S3C_I2SV2_DIV_PRESCALER (3) - -#define S3C_I2SV2_CLKSRC_PCLK 0 -#define S3C_I2SV2_CLKSRC_AUDIOBUS 1 -#define S3C_I2SV2_CLKSRC_CDCLK 2 - -/* Set this flag for I2S controllers that have the bit IISMOD[12] - * bridge/break RCLK signal and external Xi2sCDCLK pin. - */ -#define S3C_FEATURE_CDCLKCON (1 << 0) - -/** - * struct s3c_i2sv2_info - S3C I2S-V2 information - * @dev: The parent device passed to use from the probe. - * @regs: The pointer to the device registe block. - * @feature: Set of bit-flags indicating features of the controller. - * @master: True if the I2S core is the I2S bit clock master. - * @dma_playback: DMA information for playback channel. - * @dma_capture: DMA information for capture channel. - * @suspend_iismod: PM save for the IISMOD register. - * @suspend_iiscon: PM save for the IISCON register. - * @suspend_iispsr: PM save for the IISPSR register. - * - * This is the private codec state for the hardware associated with an - * I2S channel such as the register mappings and clock sources. - */ -struct s3c_i2sv2_info { - struct device *dev; - void __iomem *regs; - - u32 feature; - - struct clk *iis_pclk; - struct clk *iis_cclk; - - unsigned char master; - - struct s3c_dma_params *dma_playback; - struct s3c_dma_params *dma_capture; - - u32 suspend_iismod; - u32 suspend_iiscon; - u32 suspend_iispsr; - - unsigned long base; -}; - -extern struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai); - -struct s3c_i2sv2_rate_calc { - unsigned int clk_div; /* for prescaler */ - unsigned int fs_div; /* for root frame clock */ -}; - -extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, - unsigned int *fstab, - unsigned int rate, struct clk *clk); - -/** - * s3c_i2sv2_probe - probe for i2s device helper - * @dai: The ASoC DAI structure supplied to the original probe. - * @i2s: Our local i2s structure to fill in. - * @base: The base address for the registers. - */ -extern int s3c_i2sv2_probe(struct snd_soc_dai *dai, - struct s3c_i2sv2_info *i2s, - unsigned long base); - -/** - * s3c_i2sv2_register_dai - register dai with soc core - * @dev: DAI device - * @id: DAI ID - * @drv: The driver structure to register - * - * Fill in any missing fields and then register the given dai with the - * soc core. - */ -extern int s3c_i2sv2_register_dai(struct device *dev, int id, - struct snd_soc_dai_driver *drv); - -#endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */ diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c deleted file mode 100644 index d953ff4..0000000 --- a/sound/soc/s3c24xx/s3c2412-i2s.c +++ /dev/null @@ -1,212 +0,0 @@ -/* sound/soc/s3c24xx/s3c2412-i2s.c - * - * ALSA Soc Audio Layer - S3C2412 I2S driver - * - * Copyright (c) 2006 Wolfson Microelectronics PLC. - * Graeme Gregory graeme.gregory(a)wolfsonmicro.com - * linux(a)wolfsonmicro.com - * - * Copyright (c) 2007, 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben(a)simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/kernel.h> -#include <linux/io.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> -#include <mach/hardware.h> - -#include <mach/regs-gpio.h> -#include <mach/dma.h> - -#include "dma.h" -#include "regs-i2s-v2.h" -#include "s3c2412-i2s.h" - -#define S3C2412_I2S_DEBUG 0 - -static struct s3c2410_dma_client s3c2412_dma_client_out = { - .name = "I2S PCM Stereo out" -}; - -static struct s3c2410_dma_client s3c2412_dma_client_in = { - .name = "I2S PCM Stereo in" -}; - -static struct s3c_dma_params s3c2412_i2s_pcm_stereo_out = { - .client = &s3c2412_dma_client_out, - .channel = DMACH_I2S_OUT, - .dma_addr = S3C2410_PA_IIS + S3C2412_IISTXD, - .dma_size = 4, -}; - -static struct s3c_dma_params s3c2412_i2s_pcm_stereo_in = { - .client = &s3c2412_dma_client_in, - .channel = DMACH_I2S_IN, - .dma_addr = S3C2410_PA_IIS + S3C2412_IISRXD, - .dma_size = 4, -}; - -static struct s3c_i2sv2_info s3c2412_i2s; - -static int s3c2412_i2s_probe(struct snd_soc_dai *dai) -{ - int ret; - - pr_debug("Entered %s\n", __func__); - - ret = s3c_i2sv2_probe(dai, &s3c2412_i2s, S3C2410_PA_IIS); - if (ret) - return ret; - - s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in; - s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out; - - s3c2412_i2s.iis_cclk = clk_get(dai->dev, "i2sclk"); - if (s3c2412_i2s.iis_cclk == NULL) { - pr_err("failed to get i2sclk clock\n"); - iounmap(s3c2412_i2s.regs); - return -ENODEV; - } - - /* Set MPLL as the source for IIS CLK */ - - clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll")); - clk_enable(s3c2412_i2s.iis_cclk); - - s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk; - - /* Configure the I2S pins in correct mode */ - s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK); - s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK); - s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK); - s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI); - s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO); - - return 0; -} - -static int s3c2412_i2s_remove(struct snd_soc_dai *dai) -{ - clk_disable(s3c2412_i2s.iis_cclk); - clk_put(s3c2412_i2s.iis_cclk); - iounmap(s3c2412_i2s.regs); - - return 0; -} - -static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *cpu_dai) -{ - struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(cpu_dai); - struct s3c_dma_params *dma_data; - u32 iismod; - - pr_debug("Entered %s\n", __func__); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = i2s->dma_playback; - else - dma_data = i2s->dma_capture; - - snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); - - iismod = readl(i2s->regs + S3C2412_IISMOD); - pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); - - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - iismod |= S3C2412_IISMOD_8BIT; - break; - case SNDRV_PCM_FORMAT_S16_LE: - iismod &= ~S3C2412_IISMOD_8BIT; - break; - } - - writel(iismod, i2s->regs + S3C2412_IISMOD); - pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); - - return 0; -} - -#define S3C2412_I2S_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - -static struct snd_soc_dai_ops s3c2412_i2s_dai_ops = { - .hw_params = s3c2412_i2s_hw_params, -}; - -static struct snd_soc_dai_driver s3c2412_i2s_dai = { - .probe = s3c2412_i2s_probe, - .remove = s3c2412_i2s_remove, - .playback = { - .channels_min = 2, - .channels_max = 2, - .rates = S3C2412_I2S_RATES, - .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, - }, - .capture = { - .channels_min = 2, - .channels_max = 2, - .rates = S3C2412_I2S_RATES, - .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, - }, - .ops = &s3c2412_i2s_dai_ops, -}; - -static __devinit int s3c2412_iis_dev_probe(struct platform_device *pdev) -{ - return snd_soc_register_dai(&pdev->dev, &s3c2412_i2s_dai); -} - -static __devexit int s3c2412_iis_dev_remove(struct platform_device *pdev) -{ - snd_soc_unregister_dai(&pdev->dev); - return 0; -} - -static struct platform_driver s3c2412_iis_driver = { - .probe = s3c2412_iis_dev_probe, - .remove = s3c2412_iis_dev_remove, - .driver = { - .name = "s3c2412-iis", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2412_i2s_init(void) -{ - return platform_driver_register(&s3c2412_iis_driver); -} -module_init(s3c2412_i2s_init); - -static void __exit s3c2412_i2s_exit(void) -{ - platform_driver_unregister(&s3c2412_iis_driver); -} -module_exit(s3c2412_i2s_exit); - -/* Module information */ -MODULE_AUTHOR("Ben Dooks, <ben(a)simtec.co.uk>"); -MODULE_DESCRIPTION("S3C2412 I2S SoC Interface"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s3c2412-iis"); diff --git a/sound/soc/s3c24xx/s3c2412-i2s.h b/sound/soc/s3c24xx/s3c2412-i2s.h deleted file mode 100644 index 01a0471..0000000 --- a/sound/soc/s3c24xx/s3c2412-i2s.h +++ /dev/null @@ -1,27 +0,0 @@ -/* sound/soc/s3c24xx/s3c2412-i2s.c - * - * ALSA Soc Audio Layer - S3C2412 I2S driver - * - * Copyright (c) 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben(a)simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. -*/ - -#ifndef __SND_SOC_S3C24XX_S3C2412_I2S_H -#define __SND_SOC_S3C24XX_S3C2412_I2S_H __FILE__ - -#include "s3c-i2s-v2.h" - -#define S3C2412_DIV_BCLK S3C_I2SV2_DIV_BCLK -#define S3C2412_DIV_RCLK S3C_I2SV2_DIV_RCLK -#define S3C2412_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER - -#define S3C2412_CLKSRC_PCLK S3C_I2SV2_CLKSRC_PCLK -#define S3C2412_CLKSRC_I2SCLK S3C_I2SV2_CLKSRC_AUDIOBUS - -#endif /* __SND_SOC_S3C24XX_S3C2412_I2S_H */ diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c deleted file mode 100644 index 13e41ed..0000000 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * s3c24xx-i2s.c -- ALSA Soc Audio Layer - * - * (c) 2006 Wolfson Microelectronics PLC. - * Graeme Gregory graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com - * - * Copyright 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben(a)simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/jiffies.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/regs-gpio.h> -#include <mach/regs-clock.h> - -#include <asm/dma.h> -#include <mach/dma.h> - -#include <plat/regs-iis.h> - -#include "dma.h" -#include "s3c24xx-i2s.h" - -static struct s3c2410_dma_client s3c24xx_dma_client_out = { - .name = "I2S PCM Stereo out" -}; - -static struct s3c2410_dma_client s3c24xx_dma_client_in = { - .name = "I2S PCM Stereo in" -}; - -static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = { - .client = &s3c24xx_dma_client_out, - .channel = DMACH_I2S_OUT, - .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO, - .dma_size = 2, -}; - -static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = { - .client = &s3c24xx_dma_client_in, - .channel = DMACH_I2S_IN, - .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO, - .dma_size = 2, -}; - -struct s3c24xx_i2s_info { - void __iomem *regs; - struct clk *iis_clk; - u32 iiscon; - u32 iismod; - u32 iisfcon; - u32 iispsr; -}; -static struct s3c24xx_i2s_info s3c24xx_i2s; - -static void s3c24xx_snd_txctrl(int on) -{ - u32 iisfcon; - u32 iiscon; - u32 iismod; - - pr_debug("Entered %s\n", __func__); - - iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); - iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); - iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - - pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); - - if (on) { - iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE; - iiscon |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN; - iiscon &= ~S3C2410_IISCON_TXIDLE; - iismod |= S3C2410_IISMOD_TXMODE; - - writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); - writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); - } else { - /* note, we have to disable the FIFOs otherwise bad things - * seem to happen when the DMA stops. According to the - * Samsung supplied kernel, this should allow the DMA - * engine and FIFOs to reset. If this isn't allowed, the - * DMA engine will simply freeze randomly. - */ - - iisfcon &= ~S3C2410_IISFCON_TXENABLE; - iisfcon &= ~S3C2410_IISFCON_TXDMA; - iiscon |= S3C2410_IISCON_TXIDLE; - iiscon &= ~S3C2410_IISCON_TXDMAEN; - iismod &= ~S3C2410_IISMOD_TXMODE; - - writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); - writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); - writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - } - - pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); -} - -static void s3c24xx_snd_rxctrl(int on) -{ - u32 iisfcon; - u32 iiscon; - u32 iismod; - - pr_debug("Entered %s\n", __func__); - - iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); - iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); - iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - - pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); - - if (on) { - iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE; - iiscon |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN; - iiscon &= ~S3C2410_IISCON_RXIDLE; - iismod |= S3C2410_IISMOD_RXMODE; - - writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); - writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); - } else { - /* note, we have to disable the FIFOs otherwise bad things - * seem to happen when the DMA stops. According to the - * Samsung supplied kernel, this should allow the DMA - * engine and FIFOs to reset. If this isn't allowed, the - * DMA engine will simply freeze randomly. - */ - - iisfcon &= ~S3C2410_IISFCON_RXENABLE; - iisfcon &= ~S3C2410_IISFCON_RXDMA; - iiscon |= S3C2410_IISCON_RXIDLE; - iiscon &= ~S3C2410_IISCON_RXDMAEN; - iismod &= ~S3C2410_IISMOD_RXMODE; - - writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); - writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); - writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - } - - pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); -} - -/* - * Wait for the LR signal to allow synchronisation to the L/R clock - * from the codec. May only be needed for slave mode. - */ -static int s3c24xx_snd_lrsync(void) -{ - u32 iiscon; - int timeout = 50; /* 5ms */ - - pr_debug("Entered %s\n", __func__); - - while (1) { - iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); - if (iiscon & S3C2410_IISCON_LRINDEX) - break; - - if (!timeout--) - return -ETIMEDOUT; - udelay(100); - } - - return 0; -} - -/* - * Check whether CPU is the master or slave - */ -static inline int s3c24xx_snd_is_clkmaster(void) -{ - pr_debug("Entered %s\n", __func__); - - return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1; -} - -/* - * Set S3C24xx I2S DAI format - */ -static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - u32 iismod; - - pr_debug("Entered %s\n", __func__); - - iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - pr_debug("hw_params r: IISMOD: %x \n", iismod); - - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { - case SND_SOC_DAIFMT_CBM_CFM: - iismod |= S3C2410_IISMOD_SLAVE; - break; - case SND_SOC_DAIFMT_CBS_CFS: - iismod &= ~S3C2410_IISMOD_SLAVE; - break; - default: - return -EINVAL; - } - - switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_LEFT_J: - iismod |= S3C2410_IISMOD_MSB; - break; - case SND_SOC_DAIFMT_I2S: - iismod &= ~S3C2410_IISMOD_MSB; - break; - default: - return -EINVAL; - } - - writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - pr_debug("hw_params w: IISMOD: %x \n", iismod); - return 0; -} - -static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct s3c_dma_params *dma_data; - u32 iismod; - - pr_debug("Entered %s\n", __func__); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = &s3c24xx_i2s_pcm_stereo_out; - else - dma_data = &s3c24xx_i2s_pcm_stereo_in; - - snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); - - /* Working copies of register */ - iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - pr_debug("hw_params r: IISMOD: %x\n", iismod); - - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - iismod &= ~S3C2410_IISMOD_16BIT; - dma_data->dma_size = 1; - break; - case SNDRV_PCM_FORMAT_S16_LE: - iismod |= S3C2410_IISMOD_16BIT; - dma_data->dma_size = 2; - break; - default: - return -EINVAL; - } - - writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - pr_debug("hw_params w: IISMOD: %x\n", iismod); - return 0; -} - -static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) -{ - int ret = 0; - struct s3c_dma_params *dma_data = - snd_soc_dai_get_dma_data(dai, substream); - - pr_debug("Entered %s\n", __func__); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - if (!s3c24xx_snd_is_clkmaster()) { - ret = s3c24xx_snd_lrsync(); - if (ret) - goto exit_err; - } - - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - s3c24xx_snd_rxctrl(1); - else - s3c24xx_snd_txctrl(1); - - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); - break; - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - s3c24xx_snd_rxctrl(0); - else - s3c24xx_snd_txctrl(0); - break; - default: - ret = -EINVAL; - break; - } - -exit_err: - return ret; -} - -/* - * Set S3C24xx Clock source - */ -static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - - pr_debug("Entered %s\n", __func__); - - iismod &= ~S3C2440_IISMOD_MPLL; - - switch (clk_id) { - case S3C24XX_CLKSRC_PCLK: - break; - case S3C24XX_CLKSRC_MPLL: - iismod |= S3C2440_IISMOD_MPLL; - break; - default: - return -EINVAL; - } - - writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - return 0; -} - -/* - * Set S3C24xx Clock dividers - */ -static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - u32 reg; - - pr_debug("Entered %s\n", __func__); - - switch (div_id) { - case S3C24XX_DIV_BCLK: - reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK; - writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD); - break; - case S3C24XX_DIV_MCLK: - reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS); - writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD); - break; - case S3C24XX_DIV_PRESCALER: - writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR); - reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON); - writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON); - break; - default: - return -EINVAL; - } - - return 0; -} - -/* - * To avoid duplicating clock code, allow machine driver to - * get the clockrate from here. - */ -u32 s3c24xx_i2s_get_clockrate(void) -{ - return clk_get_rate(s3c24xx_i2s.iis_clk); -} -EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate); - -static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) -{ - pr_debug("Entered %s\n", __func__); - - s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100); - if (s3c24xx_i2s.regs == NULL) - return -ENXIO; - - s3c24xx_i2s.iis_clk = clk_get(dai->dev, "iis"); - if (s3c24xx_i2s.iis_clk == NULL) { - pr_err("failed to get iis_clock\n"); - iounmap(s3c24xx_i2s.regs); - return -ENODEV; - } - clk_enable(s3c24xx_i2s.iis_clk); - - /* Configure the I2S pins in correct mode */ - s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK); - s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK); - s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK); - s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI); - s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO); - - writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON); - - s3c24xx_snd_txctrl(0); - s3c24xx_snd_rxctrl(0); - - return 0; -} - -#ifdef CONFIG_PM -static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai) -{ - pr_debug("Entered %s\n", __func__); - - s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); - s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); - s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); - s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR); - - clk_disable(s3c24xx_i2s.iis_clk); - - return 0; -} - -static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai) -{ - pr_debug("Entered %s\n", __func__); - clk_enable(s3c24xx_i2s.iis_clk); - - writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); - writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); - writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); - writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR); - - return 0; -} -#else -#define s3c24xx_i2s_suspend NULL -#define s3c24xx_i2s_resume NULL -#endif - - -#define S3C24XX_I2S_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - -static struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = { - .trigger = s3c24xx_i2s_trigger, - .hw_params = s3c24xx_i2s_hw_params, - .set_fmt = s3c24xx_i2s_set_fmt, - .set_clkdiv = s3c24xx_i2s_set_clkdiv, - .set_sysclk = s3c24xx_i2s_set_sysclk, -}; - -static struct snd_soc_dai_driver s3c24xx_i2s_dai = { - .probe = s3c24xx_i2s_probe, - .suspend = s3c24xx_i2s_suspend, - .resume = s3c24xx_i2s_resume, - .playback = { - .channels_min = 2, - .channels_max = 2, - .rates = S3C24XX_I2S_RATES, - .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,}, - .capture = { - .channels_min = 2, - .channels_max = 2, - .rates = S3C24XX_I2S_RATES, - .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,}, - .ops = &s3c24xx_i2s_dai_ops, -}; - -static __devinit int s3c24xx_iis_dev_probe(struct platform_device *pdev) -{ - return snd_soc_register_dai(&pdev->dev, &s3c24xx_i2s_dai); -} - -static __devexit int s3c24xx_iis_dev_remove(struct platform_device *pdev) -{ - snd_soc_unregister_dai(&pdev->dev); - return 0; -} - -static struct platform_driver s3c24xx_iis_driver = { - .probe = s3c24xx_iis_dev_probe, - .remove = s3c24xx_iis_dev_remove, - .driver = { - .name = "s3c24xx-iis", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c24xx_i2s_init(void) -{ - return platform_driver_register(&s3c24xx_iis_driver); -} -module_init(s3c24xx_i2s_init); - -static void __exit s3c24xx_i2s_exit(void) -{ - platform_driver_unregister(&s3c24xx_iis_driver); -} -module_exit(s3c24xx_i2s_exit); - -/* Module information */ -MODULE_AUTHOR("Ben Dooks, <ben(a)simtec.co.uk>"); -MODULE_DESCRIPTION("s3c24xx I2S SoC Interface"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s3c24xx-iis"); diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.h b/sound/soc/s3c24xx/s3c24xx-i2s.h deleted file mode 100644 index f9ca04e..0000000 --- a/sound/soc/s3c24xx/s3c24xx-i2s.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * s3c24xx-i2s.c -- ALSA Soc Audio Layer - * - * Copyright 2005 Wolfson Microelectronics PLC. - * Author: Graeme Gregory - * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Revision history - * 10th Nov 2006 Initial version. - */ - -#ifndef S3C24XXI2S_H_ -#define S3C24XXI2S_H_ - -/* clock sources */ -#define S3C24XX_CLKSRC_PCLK 0 -#define S3C24XX_CLKSRC_MPLL 1 - -/* Clock dividers */ -#define S3C24XX_DIV_MCLK 0 -#define S3C24XX_DIV_BCLK 1 -#define S3C24XX_DIV_PRESCALER 2 - -/* prescaler */ -#define S3C24XX_PRESCALE(a,b) \ - (((a - 1) << S3C2410_IISPSR_INTSHIFT) | ((b - 1) << S3C2410_IISPSR_EXTSHFIT)) - -u32 s3c24xx_i2s_get_clockrate(void); - -#endif /*S3C24XXI2S_H_*/ diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c deleted file mode 100644 index 3f052a5..0000000 --- a/sound/soc/s3c24xx/s3c24xx_simtec.c +++ /dev/null @@ -1,395 +0,0 @@ -/* sound/soc/s3c24xx/s3c24xx_simtec.c - * - * Copyright 2009 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/clk.h> -#include <linux/i2c.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <plat/audio-simtec.h> - -#include "dma.h" -#include "s3c24xx-i2s.h" -#include "s3c24xx_simtec.h" - -static struct s3c24xx_audio_simtec_pdata *pdata; -static struct clk *xtal_clk; - -static int spk_gain; -static int spk_unmute; - -/** - * speaker_gain_get - read the speaker gain setting. - * @kcontrol: The control for the speaker gain. - * @ucontrol: The value that needs to be updated. - * - * Read the value for the AMP gain control. - */ -static int speaker_gain_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - ucontrol->value.integer.value[0] = spk_gain; - return 0; -} - -/** - * speaker_gain_set - set the value of the speaker amp gain - * @value: The value to write. - */ -static void speaker_gain_set(int value) -{ - gpio_set_value_cansleep(pdata->amp_gain[0], value & 1); - gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1); -} - -/** - * speaker_gain_put - set the speaker gain setting. - * @kcontrol: The control for the speaker gain. - * @ucontrol: The value that needs to be set. - * - * Set the value of the speaker gain from the specified - * @ucontrol setting. - * - * Note, if the speaker amp is muted, then we do not set a gain value - * as at-least one of the ICs that is fitted will try and power up even - * if the main control is set to off. - */ -static int speaker_gain_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - int value = ucontrol->value.integer.value[0]; - - spk_gain = value; - - if (!spk_unmute) - speaker_gain_set(value); - - return 0; -} - -static const struct snd_kcontrol_new amp_gain_controls[] = { - SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0, - speaker_gain_get, speaker_gain_put), -}; - -/** - * spk_unmute_state - set the unmute state of the speaker - * @to: zero to unmute, non-zero to ununmute. - */ -static void spk_unmute_state(int to) -{ - pr_debug("%s: to=%d\n", __func__, to); - - spk_unmute = to; - gpio_set_value(pdata->amp_gpio, to); - - /* if we're umuting, also re-set the gain */ - if (to && pdata->amp_gain[0] > 0) - speaker_gain_set(spk_gain); -} - -/** - * speaker_unmute_get - read the speaker unmute setting. - * @kcontrol: The control for the speaker gain. - * @ucontrol: The value that needs to be updated. - * - * Read the value for the AMP gain control. - */ -static int speaker_unmute_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - ucontrol->value.integer.value[0] = spk_unmute; - return 0; -} - -/** - * speaker_unmute_put - set the speaker unmute setting. - * @kcontrol: The control for the speaker gain. - * @ucontrol: The value that needs to be set. - * - * Set the value of the speaker gain from the specified - * @ucontrol setting. - */ -static int speaker_unmute_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - spk_unmute_state(ucontrol->value.integer.value[0]); - return 0; -} - -/* This is added as a manual control as the speaker amps create clicks - * when their power state is changed, which are far more noticeable than - * anything produced by the CODEC itself. - */ -static const struct snd_kcontrol_new amp_unmute_controls[] = { - SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0, - speaker_unmute_get, speaker_unmute_put), -}; - -void simtec_audio_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - - if (pdata->amp_gpio > 0) { - pr_debug("%s: adding amp routes\n", __func__); - - snd_soc_add_controls(codec, amp_unmute_controls, - ARRAY_SIZE(amp_unmute_controls)); - } - - if (pdata->amp_gain[0] > 0) { - pr_debug("%s: adding amp controls\n", __func__); - snd_soc_add_controls(codec, amp_gain_controls, - ARRAY_SIZE(amp_gain_controls)); - } -} -EXPORT_SYMBOL_GPL(simtec_audio_init); - -#define CODEC_CLOCK 12000000 - -/** - * simtec_hw_params - update hardware parameters - * @substream: The audio substream instance. - * @params: The parameters requested. - * - * Update the codec data routing and configuration settings - * from the supplied data. - */ -static int simtec_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int ret; - - /* Set the CODEC as the bus clock master, I2S */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret) { - pr_err("%s: failed set cpu dai format\n", __func__); - return ret; - } - - /* Set the CODEC as the bus clock master */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); - if (ret) { - pr_err("%s: failed set codec dai format\n", __func__); - return ret; - } - - ret = snd_soc_dai_set_sysclk(codec_dai, 0, - CODEC_CLOCK, SND_SOC_CLOCK_IN); - if (ret) { - pr_err( "%s: failed setting codec sysclk\n", __func__); - return ret; - } - - if (pdata->use_mpllin) { - ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL, - 0, SND_SOC_CLOCK_OUT); - - if (ret) { - pr_err("%s: failed to set MPLLin as clksrc\n", - __func__); - return ret; - } - } - - if (pdata->output_cdclk) { - int cdclk_scale; - - cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK; - cdclk_scale--; - - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, - cdclk_scale); - } - - return 0; -} - -static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd) -{ - /* call any board supplied startup code, this currently only - * covers the bast/vr1000 which have a CPLD in the way of the - * LRCLK */ - if (pd->startup) - pd->startup(); - - return 0; -} - -static struct snd_soc_ops simtec_snd_ops = { - .hw_params = simtec_hw_params, -}; - -/** - * attach_gpio_amp - get and configure the necessary gpios - * @dev: The device we're probing. - * @pd: The platform data supplied by the board. - * - * If there is a GPIO based amplifier attached to the board, claim - * the necessary GPIO lines for it, and set default values. - */ -static int attach_gpio_amp(struct device *dev, - struct s3c24xx_audio_simtec_pdata *pd) -{ - int ret; - - /* attach gpio amp gain (if any) */ - if (pdata->amp_gain[0] > 0) { - ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0"); - if (ret) { - dev_err(dev, "cannot get amp gpio gain0\n"); - return ret; - } - - ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1"); - if (ret) { - dev_err(dev, "cannot get amp gpio gain1\n"); - gpio_free(pdata->amp_gain[0]); - return ret; - } - - gpio_direction_output(pd->amp_gain[0], 0); - gpio_direction_output(pd->amp_gain[1], 0); - } - - /* note, currently we assume GPA0 isn't valid amp */ - if (pdata->amp_gpio > 0) { - ret = gpio_request(pd->amp_gpio, "gpio-amp"); - if (ret) { - dev_err(dev, "cannot get amp gpio %d (%d)\n", - pd->amp_gpio, ret); - goto err_amp; - } - - /* set the amp off at startup */ - spk_unmute_state(0); - } - - return 0; - -err_amp: - if (pd->amp_gain[0] > 0) { - gpio_free(pd->amp_gain[0]); - gpio_free(pd->amp_gain[1]); - } - - return ret; -} - -static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd) -{ - if (pd->amp_gain[0] > 0) { - gpio_free(pd->amp_gain[0]); - gpio_free(pd->amp_gain[1]); - } - - if (pd->amp_gpio > 0) - gpio_free(pd->amp_gpio); -} - -#ifdef CONFIG_PM -int simtec_audio_resume(struct device *dev) -{ - simtec_call_startup(pdata); - return 0; -} - -const struct dev_pm_ops simtec_audio_pmops = { - .resume = simtec_audio_resume, -}; -EXPORT_SYMBOL_GPL(simtec_audio_pmops); -#endif - -int __devinit simtec_audio_core_probe(struct platform_device *pdev, - struct snd_soc_card *card) -{ - struct platform_device *snd_dev; - int ret; - - card->dai_link->ops = &simtec_snd_ops; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "no platform data supplied\n"); - return -EINVAL; - } - - simtec_call_startup(pdata); - - xtal_clk = clk_get(&pdev->dev, "xtal"); - if (IS_ERR(xtal_clk)) { - dev_err(&pdev->dev, "could not get clkout0\n"); - return -EINVAL; - } - - dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk)); - - ret = attach_gpio_amp(&pdev->dev, pdata); - if (ret) - goto err_clk; - - snd_dev = platform_device_alloc("soc-audio", -1); - if (!snd_dev) { - dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n"); - ret = -ENOMEM; - goto err_gpio; - } - - platform_set_drvdata(snd_dev, card); - - ret = platform_device_add(snd_dev); - if (ret) { - dev_err(&pdev->dev, "failed to add soc-audio dev\n"); - goto err_pdev; - } - - platform_set_drvdata(pdev, snd_dev); - return 0; - -err_pdev: - platform_device_put(snd_dev); - -err_gpio: - detach_gpio_amp(pdata); - -err_clk: - clk_put(xtal_clk); - return ret; -} -EXPORT_SYMBOL_GPL(simtec_audio_core_probe); - -int __devexit simtec_audio_remove(struct platform_device *pdev) -{ - struct platform_device *snd_dev = platform_get_drvdata(pdev); - - platform_device_unregister(snd_dev); - - detach_gpio_amp(pdata); - clk_put(xtal_clk); - return 0; -} -EXPORT_SYMBOL_GPL(simtec_audio_remove); - -MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); -MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/s3c24xx/s3c24xx_simtec.h deleted file mode 100644 index e63d5ff..0000000 --- a/sound/soc/s3c24xx/s3c24xx_simtec.h +++ /dev/null @@ -1,22 +0,0 @@ -/* sound/soc/s3c24xx/s3c24xx_simtec.h - * - * Copyright 2009 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void simtec_audio_init(struct snd_soc_pcm_runtime *rtd); - -extern int simtec_audio_core_probe(struct platform_device *pdev, - struct snd_soc_card *card); - -extern int simtec_audio_remove(struct platform_device *pdev); - -#ifdef CONFIG_PM -extern const struct dev_pm_ops simtec_audio_pmops; -#define simtec_audio_pm &simtec_audio_pmops -#else -#define simtec_audio_pm NULL -#endif diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c deleted file mode 100644 index 8b246ab..0000000 --- a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c +++ /dev/null @@ -1,146 +0,0 @@ -/* sound/soc/s3c24xx/s3c24xx_simtec_hermes.c - * - * Copyright 2009 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/platform_device.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <plat/audio-simtec.h> - -#include "dma.h" -#include "s3c24xx-i2s.h" -#include "s3c24xx_simtec.h" - -#include "../codecs/tlv320aic3x.h" - -static const struct snd_soc_dapm_widget dapm_widgets[] = { - SND_SOC_DAPM_LINE("GSM Out", NULL), - SND_SOC_DAPM_LINE("GSM In", NULL), - SND_SOC_DAPM_LINE("Line In", NULL), - SND_SOC_DAPM_LINE("Line Out", NULL), - SND_SOC_DAPM_LINE("ZV", NULL), - SND_SOC_DAPM_MIC("Mic Jack", NULL), - SND_SOC_DAPM_HP("Headphone Jack", NULL), -}; - -static const struct snd_soc_dapm_route base_map[] = { - /* Headphone connected to HP{L,R}OUT and HP{L,R}COM */ - - { "Headphone Jack", NULL, "HPLOUT" }, - { "Headphone Jack", NULL, "HPLCOM" }, - { "Headphone Jack", NULL, "HPROUT" }, - { "Headphone Jack", NULL, "HPRCOM" }, - - /* ZV connected to Line1 */ - - { "LINE1L", NULL, "ZV" }, - { "LINE1R", NULL, "ZV" }, - - /* Line In connected to Line2 */ - - { "LINE2L", NULL, "Line In" }, - { "LINE2R", NULL, "Line In" }, - - /* Microphone connected to MIC3R and MIC_BIAS */ - - { "MIC3L", NULL, "Mic Jack" }, - - /* GSM connected to MONO_LOUT and MIC3L (in) */ - - { "GSM Out", NULL, "MONO_LOUT" }, - { "MIC3L", NULL, "GSM In" }, - - /* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are - * not using the DAPM to power it up and down as there it makes - * a click when powering up. */ -}; - -/** - * simtec_hermes_init - initialise and add controls - * @codec; The codec instance to attach to. - * - * Attach our controls and configure the necessary codec - * mappings for our sound card instance. -*/ -static int simtec_hermes_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - - snd_soc_dapm_new_controls(codec, dapm_widgets, - ARRAY_SIZE(dapm_widgets)); - - snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map)); - - snd_soc_dapm_enable_pin(codec, "Headphone Jack"); - snd_soc_dapm_enable_pin(codec, "Line In"); - snd_soc_dapm_enable_pin(codec, "Line Out"); - snd_soc_dapm_enable_pin(codec, "Mic Jack"); - - simtec_audio_init(rtd); - snd_soc_dapm_sync(codec); - - return 0; -} - -static struct snd_soc_dai_link simtec_dai_aic33 = { - .name = "tlv320aic33", - .stream_name = "TLV320AIC33", - .codec_name = "tlv320aic3x-codec.0-0x1a", - .cpu_dai_name = "s3c24xx-i2s", - .codec_dai_name = "tlv320aic3x-hifi", - .platform_name = "samsung-audio", - .init = simtec_hermes_init, -}; - -/* simtec audio machine driver */ -static struct snd_soc_card snd_soc_machine_simtec_aic33 = { - .name = "Simtec-Hermes", - .dai_link = &simtec_dai_aic33, - .num_links = 1, -}; - -static int __devinit simtec_audio_hermes_probe(struct platform_device *pd) -{ - dev_info(&pd->dev, "probing....\n"); - return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic33); -} - -static struct platform_driver simtec_audio_hermes_platdrv = { - .driver = { - .owner = THIS_MODULE, - .name = "s3c24xx-simtec-hermes-snd", - .pm = simtec_audio_pm, - }, - .probe = simtec_audio_hermes_probe, - .remove = __devexit_p(simtec_audio_remove), -}; - -MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd"); - -static int __init simtec_hermes_modinit(void) -{ - return platform_driver_register(&simtec_audio_hermes_platdrv); -} - -static void __exit simtec_hermes_modexit(void) -{ - platform_driver_unregister(&simtec_audio_hermes_platdrv); -} - -module_init(simtec_hermes_modinit); -module_exit(simtec_hermes_modexit); - -MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); -MODULE_DESCRIPTION("ALSA SoC Simtec Audio support"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c deleted file mode 100644 index a922e1e..0000000 --- a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c +++ /dev/null @@ -1,134 +0,0 @@ -/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c - * - * Copyright 2009 Simtec Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/platform_device.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <plat/audio-simtec.h> - -#include "dma.h" -#include "s3c24xx-i2s.h" -#include "s3c24xx_simtec.h" - -#include "../codecs/tlv320aic23.h" - -/* supported machines: - * - * Machine Connections AMP - * ------- ----------- --- - * BAST MIC, HPOUT, LOUT, LIN TPA2001D1 (HPOUTL,R) (gain hardwired) - * VR1000 HPOUT, LIN None - * VR2000 LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) - * DePicture LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) - * Anubis LIN, LOUT, MIC, HP TPA2001D1 (HPOUTL,R) - */ - -static const struct snd_soc_dapm_widget dapm_widgets[] = { - SND_SOC_DAPM_HP("Headphone Jack", NULL), - SND_SOC_DAPM_LINE("Line In", NULL), - SND_SOC_DAPM_LINE("Line Out", NULL), - SND_SOC_DAPM_MIC("Mic Jack", NULL), -}; - -static const struct snd_soc_dapm_route base_map[] = { - { "Headphone Jack", NULL, "LHPOUT"}, - { "Headphone Jack", NULL, "RHPOUT"}, - - { "Line Out", NULL, "LOUT" }, - { "Line Out", NULL, "ROUT" }, - - { "LLINEIN", NULL, "Line In"}, - { "RLINEIN", NULL, "Line In"}, - - { "MICIN", NULL, "Mic Jack"}, -}; - -/** - * simtec_tlv320aic23_init - initialise and add controls - * @codec; The codec instance to attach to. - * - * Attach our controls and configure the necessary codec - * mappings for our sound card instance. -*/ -static int simtec_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - - snd_soc_dapm_new_controls(codec, dapm_widgets, - ARRAY_SIZE(dapm_widgets)); - - snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map)); - - snd_soc_dapm_enable_pin(codec, "Headphone Jack"); - snd_soc_dapm_enable_pin(codec, "Line In"); - snd_soc_dapm_enable_pin(codec, "Line Out"); - snd_soc_dapm_enable_pin(codec, "Mic Jack"); - - simtec_audio_init(rtd); - snd_soc_dapm_sync(codec); - - return 0; -} - -static struct snd_soc_dai_link simtec_dai_aic23 = { - .name = "tlv320aic23", - .stream_name = "TLV320AIC23", - .codec_name = "tlv320aic3x-codec.0-0x1a", - .cpu_dai_name = "s3c24xx-i2s", - .codec_dai_name = "tlv320aic3x-hifi", - .platform_name = "samsung-audio", - .init = simtec_tlv320aic23_init, -}; - -/* simtec audio machine driver */ -static struct snd_soc_card snd_soc_machine_simtec_aic23 = { - .name = "Simtec", - .dai_link = &simtec_dai_aic23, - .num_links = 1, -}; - -static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd) -{ - return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic23); -} - -static struct platform_driver simtec_audio_tlv320aic23_platdrv = { - .driver = { - .owner = THIS_MODULE, - .name = "s3c24xx-simtec-tlv320aic23", - .pm = simtec_audio_pm, - }, - .probe = simtec_audio_tlv320aic23_probe, - .remove = __devexit_p(simtec_audio_remove), -}; - -MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23"); - -static int __init simtec_tlv320aic23_modinit(void) -{ - return platform_driver_register(&simtec_audio_tlv320aic23_platdrv); -} - -static void __exit simtec_tlv320aic23_modexit(void) -{ - platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv); -} - -module_init(simtec_tlv320aic23_modinit); -module_exit(simtec_tlv320aic23_modexit); - -MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); -MODULE_DESCRIPTION("ALSA SoC Simtec Audio support"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c deleted file mode 100644 index 87eeb46..0000000 --- a/sound/soc/s3c24xx/s3c24xx_uda134x.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * Modifications by Christian Pellegrin <chripell(a)evolware.org> - * - * s3c24xx_uda134x.c -- S3C24XX_UDA134X ALSA SoC Audio board driver - * - * Copyright 2007 Dension Audio Systems Ltd. - * Author: Zoltan Devai - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/gpio.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> -#include <sound/s3c24xx_uda134x.h> -#include <sound/uda134x.h> - -#include <plat/regs-iis.h> - -#include "dma.h" -#include "s3c24xx-i2s.h" -#include "../codecs/uda134x.h" - - -/* #define ENFORCE_RATES 1 */ -/* - Unfortunately the S3C24XX in master mode has a limited capacity of - generating the clock for the codec. If you define this only rates - that are really available will be enforced. But be careful, most - user level application just want the usual sampling frequencies (8, - 11.025, 22.050, 44.1 kHz) and anyway resampling is a costly - operation for embedded systems. So if you aren't very lucky or your - hardware engineer wasn't very forward-looking it's better to leave - this undefined. If you do so an approximate value for the requested - sampling rate in the range -/+ 5% will be chosen. If this in not - possible an error will be returned. -*/ - -static struct clk *xtal; -static struct clk *pclk; -/* this is need because we don't have a place where to keep the - * pointers to the clocks in each substream. We get the clocks only - * when we are actually using them so we don't block stuff like - * frequency change or oscillator power-off */ -static int clk_users; -static DEFINE_MUTEX(clk_lock); - -static unsigned int rates[33 * 2]; -#ifdef ENFORCE_RATES -static struct snd_pcm_hw_constraint_list hw_constraints_rates = { - .count = ARRAY_SIZE(rates), - .list = rates, - .mask = 0, -}; -#endif - -static struct platform_device *s3c24xx_uda134x_snd_device; - -static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) -{ - int ret = 0; -#ifdef ENFORCE_RATES - struct snd_pcm_runtime *runtime = substream->runtime; -#endif - - mutex_lock(&clk_lock); - pr_debug("%s %d\n", __func__, clk_users); - if (clk_users == 0) { - xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal"); - if (!xtal) { - printk(KERN_ERR "%s cannot get xtal\n", __func__); - ret = -EBUSY; - } else { - pclk = clk_get(&s3c24xx_uda134x_snd_device->dev, - "pclk"); - if (!pclk) { - printk(KERN_ERR "%s cannot get pclk\n", - __func__); - clk_put(xtal); - ret = -EBUSY; - } - } - if (!ret) { - int i, j; - - for (i = 0; i < 2; i++) { - int fs = i ? 256 : 384; - - rates[i*33] = clk_get_rate(xtal) / fs; - for (j = 1; j < 33; j++) - rates[i*33 + j] = clk_get_rate(pclk) / - (j * fs); - } - } - } - clk_users += 1; - mutex_unlock(&clk_lock); - if (!ret) { -#ifdef ENFORCE_RATES - ret = snd_pcm_hw_constraint_list(runtime, 0, - SNDRV_PCM_HW_PARAM_RATE, - &hw_constraints_rates); - if (ret < 0) - printk(KERN_ERR "%s cannot set constraints\n", - __func__); -#endif - } - return ret; -} - -static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream) -{ - mutex_lock(&clk_lock); - pr_debug("%s %d\n", __func__, clk_users); - clk_users -= 1; - if (clk_users == 0) { - clk_put(xtal); - xtal = NULL; - clk_put(pclk); - pclk = NULL; - } - mutex_unlock(&clk_lock); -} - -static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned int clk = 0; - int ret = 0; - int clk_source, fs_mode; - unsigned long rate = params_rate(params); - long err, cerr; - unsigned int div; - int i, bi; - - err = 999999; - bi = 0; - for (i = 0; i < 2*33; i++) { - cerr = rates[i] - rate; - if (cerr < 0) - cerr = -cerr; - if (cerr < err) { - err = cerr; - bi = i; - } - } - if (bi / 33 == 1) - fs_mode = S3C2410_IISMOD_256FS; - else - fs_mode = S3C2410_IISMOD_384FS; - if (bi % 33 == 0) { - clk_source = S3C24XX_CLKSRC_MPLL; - div = 1; - } else { - clk_source = S3C24XX_CLKSRC_PCLK; - div = bi % 33; - } - pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi); - - clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate; - pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__, - fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS", - clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK", - div, clk, err); - - if ((err * 100 / rate) > 5) { - printk(KERN_ERR "S3C24XX_UDA134X: effective frequency " - "too different from desired (%ld%%)\n", - err * 100 / rate); - return -EINVAL; - } - - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk, - SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK, - S3C2410_IISMOD_32FS); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, - S3C24XX_PRESCALE(div, div)); - if (ret < 0) - return ret; - - /* set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk, - SND_SOC_CLOCK_OUT); - if (ret < 0) - return ret; - - return 0; -} - -static struct snd_soc_ops s3c24xx_uda134x_ops = { - .startup = s3c24xx_uda134x_startup, - .shutdown = s3c24xx_uda134x_shutdown, - .hw_params = s3c24xx_uda134x_hw_params, -}; - -static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = { - .name = "UDA134X", - .stream_name = "UDA134X", - .codec_name = "uda134x-hifi", - .codec_dai_name = "uda134x-hifi", - .cpu_dai_name = "s3c24xx-i2s", - .ops = &s3c24xx_uda134x_ops, - .platform_name = "samsung-audio", -}; - -static struct snd_soc_card snd_soc_s3c24xx_uda134x = { - .name = "S3C24XX_UDA134X", - .dai_link = &s3c24xx_uda134x_dai_link, - .num_links = 1, -}; - -static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins; - -static void setdat(int v) -{ - gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0); -} - -static void setclk(int v) -{ - gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0); -} - -static void setmode(int v) -{ - gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0); -} - -/* FIXME - This must be codec platform data but in which board file ?? */ -static struct uda134x_platform_data s3c24xx_uda134x = { - .l3 = { - .setdat = setdat, - .setclk = setclk, - .setmode = setmode, - .data_hold = 1, - .data_setup = 1, - .clock_high = 1, - .mode_hold = 1, - .mode = 1, - .mode_setup = 1, - }, -}; - -static int s3c24xx_uda134x_setup_pin(int pin, char *fun) -{ - if (gpio_request(pin, "s3c24xx_uda134x") < 0) { - printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " - "l3 %s pin already in use", fun); - return -EBUSY; - } - gpio_direction_output(pin, 0); - return 0; -} - -static int s3c24xx_uda134x_probe(struct platform_device *pdev) -{ - int ret; - - printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n"); - - s3c24xx_uda134x_l3_pins = pdev->dev.platform_data; - if (s3c24xx_uda134x_l3_pins == NULL) { - printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " - "unable to find platform data\n"); - return -ENODEV; - } - s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power; - s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model; - - if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data, - "data") < 0) - return -EBUSY; - if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk, - "clk") < 0) { - gpio_free(s3c24xx_uda134x_l3_pins->l3_data); - return -EBUSY; - } - if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode, - "mode") < 0) { - gpio_free(s3c24xx_uda134x_l3_pins->l3_data); - gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); - return -EBUSY; - } - - s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1); - if (!s3c24xx_uda134x_snd_device) { - printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " - "Unable to register\n"); - return -ENOMEM; - } - - platform_set_drvdata(s3c24xx_uda134x_snd_device, - &snd_soc_s3c24xx_uda134x); - ret = platform_device_add(s3c24xx_uda134x_snd_device); - if (ret) { - printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n"); - platform_device_put(s3c24xx_uda134x_snd_device); - } - - return ret; -} - -static int s3c24xx_uda134x_remove(struct platform_device *pdev) -{ - platform_device_unregister(s3c24xx_uda134x_snd_device); - gpio_free(s3c24xx_uda134x_l3_pins->l3_data); - gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); - gpio_free(s3c24xx_uda134x_l3_pins->l3_mode); - return 0; -} - -static struct platform_driver s3c24xx_uda134x_driver = { - .probe = s3c24xx_uda134x_probe, - .remove = s3c24xx_uda134x_remove, - .driver = { - .name = "s3c24xx_uda134x", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c24xx_uda134x_init(void) -{ - return platform_driver_register(&s3c24xx_uda134x_driver); -} - -static void __exit s3c24xx_uda134x_exit(void) -{ - platform_driver_unregister(&s3c24xx_uda134x_driver); -} - - -module_init(s3c24xx_uda134x_init); -module_exit(s3c24xx_uda134x_exit); - -MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell(a)evolware.org>"); -MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c deleted file mode 100644 index 5fcc420..0000000 --- a/sound/soc/s3c24xx/smartq_wm8987.c +++ /dev/null @@ -1,287 +0,0 @@ -/* sound/soc/s3c24xx/smartq_wm8987.c - * - * Copyright 2010 Maurus Cuelenaere <mcuelenaere(a)gmail.com> - * - * Based on smdk6410_wm8987.c - * Copyright 2007 Wolfson Microelectronics PLC. - linux(a)wolfsonmicro.com - * Graeme Gregory - graeme.gregory(a)wolfsonmicro.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc-dapm.h> -#include <sound/jack.h> - -#include <asm/mach-types.h> - -#include "dma.h" -#include "i2s.h" - -#include "../codecs/wm8750.h" - -/* - * WM8987 is register compatible with WM8750, so using that as base driver. - */ - -static struct snd_soc_card snd_soc_smartq; - -static int smartq_hifi_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - unsigned int clk = 0; - int ret; - - switch (params_rate(params)) { - case 8000: - case 16000: - case 32000: - case 48000: - case 96000: - clk = 12288000; - break; - case 11025: - case 22050: - case 44100: - case 88200: - clk = 11289600; - break; - } - - /* set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* Use PCLK for I2S signal generation */ - ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0, - 0, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* Gate the RCLK output on PAD */ - ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK, - 0, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk, - SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - return 0; -} - -/* - * SmartQ WM8987 HiFi DAI operations. - */ -static struct snd_soc_ops smartq_hifi_ops = { - .hw_params = smartq_hifi_hw_params, -}; - -static struct snd_soc_jack smartq_jack; - -static struct snd_soc_jack_pin smartq_jack_pins[] = { - /* Disable speaker when headphone is plugged in */ - { - .pin = "Internal Speaker", - .mask = SND_JACK_HEADPHONE, - }, -}; - -static struct snd_soc_jack_gpio smartq_jack_gpios[] = { - { - .gpio = S3C64XX_GPL(12), - .name = "headphone detect", - .report = SND_JACK_HEADPHONE, - .debounce_time = 200, - }, -}; - -static const struct snd_kcontrol_new wm8987_smartq_controls[] = { - SOC_DAPM_PIN_SWITCH("Internal Speaker"), - SOC_DAPM_PIN_SWITCH("Headphone Jack"), - SOC_DAPM_PIN_SWITCH("Internal Mic"), -}; - -static int smartq_speaker_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, - int event) -{ - gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event)); - - return 0; -} - -static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = { - SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event), - SND_SOC_DAPM_HP("Headphone Jack", NULL), - SND_SOC_DAPM_MIC("Internal Mic", NULL), -}; - -static const struct snd_soc_dapm_route audio_map[] = { - {"Headphone Jack", NULL, "LOUT2"}, - {"Headphone Jack", NULL, "ROUT2"}, - - {"Internal Speaker", NULL, "LOUT2"}, - {"Internal Speaker", NULL, "ROUT2"}, - - {"Mic Bias", NULL, "Internal Mic"}, - {"LINPUT2", NULL, "Mic Bias"}, -}; - -static int smartq_wm8987_init(struct snd_soc_codec *codec) -{ - int err = 0; - - /* Add SmartQ specific widgets */ - snd_soc_dapm_new_controls(codec, wm8987_dapm_widgets, - ARRAY_SIZE(wm8987_dapm_widgets)); - - /* add SmartQ specific controls */ - err = snd_soc_add_controls(codec, wm8987_smartq_controls, - ARRAY_SIZE(wm8987_smartq_controls)); - - if (err < 0) - return err; - - /* setup SmartQ specific audio path */ - snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); - - /* set endpoints to not connected */ - snd_soc_dapm_nc_pin(codec, "LINPUT1"); - snd_soc_dapm_nc_pin(codec, "RINPUT1"); - snd_soc_dapm_nc_pin(codec, "OUT3"); - snd_soc_dapm_nc_pin(codec, "ROUT1"); - - /* set endpoints to default off mode */ - snd_soc_dapm_enable_pin(codec, "Internal Speaker"); - snd_soc_dapm_enable_pin(codec, "Internal Mic"); - snd_soc_dapm_disable_pin(codec, "Headphone Jack"); - - err = snd_soc_dapm_sync(codec); - if (err) - return err; - - /* Headphone jack detection */ - err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack", - SND_JACK_HEADPHONE, &smartq_jack); - if (err) - return err; - - err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins), - smartq_jack_pins); - if (err) - return err; - - err = snd_soc_jack_add_gpios(&smartq_jack, - ARRAY_SIZE(smartq_jack_gpios), - smartq_jack_gpios); - - return err; -} - -static struct snd_soc_dai_link smartq_dai[] = { - { - .name = "wm8987", - .stream_name = "SmartQ Hi-Fi", - .cpu_dai_name = "samsung-i2s.0", - .codec_dai_name = "wm8750-hifi", - .platform_name = "samsung-audio", - .codec_name = "wm8750-codec.0-0x1a", - .init = smartq_wm8987_init, - .ops = &smartq_hifi_ops, - }, -}; - -static struct snd_soc_card snd_soc_smartq = { - .name = "SmartQ", - .dai_link = smartq_dai, - .num_links = ARRAY_SIZE(smartq_dai), -}; - -static struct platform_device *smartq_snd_device; - -static int __init smartq_init(void) -{ - int ret; - - if (!machine_is_smartq7() && !machine_is_smartq5()) { - pr_info("Only SmartQ is supported by this ASoC driver\n"); - return -ENODEV; - } - - smartq_snd_device = platform_device_alloc("soc-audio", -1); - if (!smartq_snd_device) - return -ENOMEM; - - platform_set_drvdata(smartq_snd_device, &snd_soc_smartq); - - ret = platform_device_add(smartq_snd_device); - if (ret) { - platform_device_put(smartq_snd_device); - return ret; - } - - /* Initialise GPIOs used by amplifiers */ - ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown"); - if (ret) { - dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n"); - goto err_unregister_device; - } - - /* Disable amplifiers */ - ret = gpio_direction_output(S3C64XX_GPK(12), 1); - if (ret) { - dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n"); - goto err_free_gpio_amp_shut; - } - - return 0; - -err_free_gpio_amp_shut: - gpio_free(S3C64XX_GPK(12)); -err_unregister_device: - platform_device_unregister(smartq_snd_device); - - return ret; -} - -static void __exit smartq_exit(void) -{ - snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios), - smartq_jack_gpios); - - platform_device_unregister(smartq_snd_device); -} - -module_init(smartq_init); -module_exit(smartq_exit); - -/* Module information */ -MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere(a)gmail.com>"); -MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c deleted file mode 100644 index 5051699..0000000 --- a/sound/soc/s3c24xx/smdk2443_wm9710.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * smdk2443_wm9710.c -- SoC audio for smdk2443 - * - * Copyright 2007 Wolfson Microelectronics PLC. - * Author: Graeme Gregory - * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include "dma.h" -#include "ac97.h" - -static struct snd_soc_card smdk2443; - -static struct snd_soc_dai_link smdk2443_dai[] = { -{ - .name = "AC97", - .stream_name = "AC97 HiFi", - .cpu_dai_name = "samsung-ac97", - .codec_dai_name = "ac97-hifi", - .codec_name = "ac97-codec", - .platform_name = "samsung-audio", -}, -}; - -static struct snd_soc_card smdk2443 = { - .name = "SMDK2443", - .dai_link = smdk2443_dai, - .num_links = ARRAY_SIZE(smdk2443_dai), -}; - -static struct platform_device *smdk2443_snd_ac97_device; - -static int __init smdk2443_init(void) -{ - int ret; - - smdk2443_snd_ac97_device = platform_device_alloc("soc-audio", -1); - if (!smdk2443_snd_ac97_device) - return -ENOMEM; - - platform_set_drvdata(smdk2443_snd_ac97_device, &smdk2443); - ret = platform_device_add(smdk2443_snd_ac97_device); - - if (ret) - platform_device_put(smdk2443_snd_ac97_device); - - return ret; -} - -static void __exit smdk2443_exit(void) -{ - platform_device_unregister(smdk2443_snd_ac97_device); -} - -module_init(smdk2443_init); -module_exit(smdk2443_exit); - -/* Module information */ -MODULE_AUTHOR("Graeme Gregory, graeme.gregory(a)wolfsonmicro.com, www.wolfsonmicro.com"); -MODULE_DESCRIPTION("ALSA SoC WM9710 SMDK2443"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c deleted file mode 100644 index 4fc6a9f..0000000 --- a/sound/soc/s3c24xx/smdk_spdif.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * smdk_spdif.c -- S/PDIF audio for SMDK - * - * Copyright 2010 Samsung Electronics Co. Ltd. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <linux/clk.h> - -#include <plat/devs.h> - -#include <sound/soc.h> - -#include "dma.h" -#include "spdif.h" - -/* Audio clock settings are belonged to board specific part. Every - * board can set audio source clock setting which is matched with H/W - * like this function-'set_audio_clock_heirachy'. - */ -static int set_audio_clock_heirachy(struct platform_device *pdev) -{ - struct clk *fout_epll, *mout_epll, *sclk_audio0, *sclk_spdif; - int ret; - - fout_epll = clk_get(NULL, "fout_epll"); - if (IS_ERR(fout_epll)) { - printk(KERN_WARNING "%s: Cannot find fout_epll.\n", - __func__); - return -EINVAL; - } - - mout_epll = clk_get(NULL, "mout_epll"); - if (IS_ERR(fout_epll)) { - printk(KERN_WARNING "%s: Cannot find mout_epll.\n", - __func__); - ret = -EINVAL; - goto out1; - } - - sclk_audio0 = clk_get(&pdev->dev, "sclk_audio"); - if (IS_ERR(sclk_audio0)) { - printk(KERN_WARNING "%s: Cannot find sclk_audio.\n", - __func__); - ret = -EINVAL; - goto out2; - } - - sclk_spdif = clk_get(NULL, "sclk_spdif"); - if (IS_ERR(fout_epll)) { - printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n", - __func__); - ret = -EINVAL; - goto out3; - } - - /* Set audio clock heirachy for S/PDIF */ - clk_set_parent(mout_epll, fout_epll); - clk_set_parent(sclk_audio0, mout_epll); - clk_set_parent(sclk_spdif, sclk_audio0); - - clk_put(sclk_spdif); -out3: - clk_put(sclk_audio0); -out2: - clk_put(mout_epll); -out1: - clk_put(fout_epll); - - return ret; -} - -/* We should haved to set clock directly on this part because of clock - * scheme of Samsudng SoCs did not support to set rates from abstrct - * clock of it's heirachy. - */ -static int set_audio_clock_rate(unsigned long epll_rate, - unsigned long audio_rate) -{ - struct clk *fout_epll, *sclk_spdif; - - fout_epll = clk_get(NULL, "fout_epll"); - if (IS_ERR(fout_epll)) { - printk(KERN_ERR "%s: failed to get fout_epll\n", __func__); - return -ENOENT; - } - - clk_set_rate(fout_epll, epll_rate); - clk_put(fout_epll); - - sclk_spdif = clk_get(NULL, "sclk_spdif"); - if (IS_ERR(sclk_spdif)) { - printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__); - return -ENOENT; - } - - clk_set_rate(sclk_spdif, audio_rate); - clk_put(sclk_spdif); - - return 0; -} - -static int smdk_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned long pll_out, rclk_rate; - int ret, ratio; - - switch (params_rate(params)) { - case 44100: - pll_out = 45158400; - break; - case 32000: - case 48000: - case 96000: - pll_out = 49152000; - break; - default: - return -EINVAL; - } - - /* Setting ratio to 512fs helps to use S/PDIF with HDMI without - * modify S/PDIF ASoC machine driver. - */ - ratio = 512; - rclk_rate = params_rate(params) * ratio; - - /* Set audio source clock rates */ - ret = set_audio_clock_rate(pll_out, rclk_rate); - if (ret < 0) - return ret; - - /* Set S/PDIF uses internal source clock */ - ret = snd_soc_dai_set_sysclk(cpu_dai, SND_SOC_SPDIF_INT_MCLK, - rclk_rate, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - return ret; -} - -static struct snd_soc_ops smdk_spdif_ops = { - .hw_params = smdk_hw_params, -}; - -static struct snd_soc_card smdk; - -static struct snd_soc_dai_link smdk_dai = { - .name = "S/PDIF", - .stream_name = "S/PDIF PCM Playback", - .platform_name = "samsung-audio", - .cpu_dai_name = "samsung-spdif", - .codec_dai_name = "dit-hifi", - .codec_name = "spdif-dit", - .ops = &smdk_spdif_ops, -}; - -static struct snd_soc_card smdk = { - .name = "SMDK-S/PDIF", - .dai_link = &smdk_dai, - .num_links = 1, -}; - -static struct platform_device *smdk_snd_spdif_dit_device; -static struct platform_device *smdk_snd_spdif_device; - -static int __init smdk_init(void) -{ - int ret; - - smdk_snd_spdif_dit_device = platform_device_alloc("spdif-dit", -1); - if (!smdk_snd_spdif_dit_device) - return -ENOMEM; - - ret = platform_device_add(smdk_snd_spdif_dit_device); - if (ret) - goto err2; - - smdk_snd_spdif_device = platform_device_alloc("soc-audio", -1); - if (!smdk_snd_spdif_device) { - ret = -ENOMEM; - goto err2; - } - - platform_set_drvdata(smdk_snd_spdif_device, &smdk); - - ret = platform_device_add(smdk_snd_spdif_device); - if (ret) - goto err1; - - /* Set audio clock heirachy manually */ - ret = set_audio_clock_heirachy(smdk_snd_spdif_device); - if (ret) - goto err1; - - return 0; -err1: - platform_device_put(smdk_snd_spdif_device); -err2: - platform_device_put(smdk_snd_spdif_dit_device); - return ret; -} - -static void __exit smdk_exit(void) -{ - platform_device_unregister(smdk_snd_spdif_device); -} - -module_init(smdk_init); -module_exit(smdk_exit); - -MODULE_AUTHOR("Seungwhan Youn, <sw.youn(a)samsung.com>"); -MODULE_DESCRIPTION("ALSA SoC SMDK+S/PDIF"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/smdk_wm8580.c b/sound/soc/s3c24xx/smdk_wm8580.c deleted file mode 100644 index 46ab884..0000000 --- a/sound/soc/s3c24xx/smdk_wm8580.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * smdk_wm8580.c - * - * Copyright (c) 2009 Samsung Electronics Co. Ltd - * Author: Jaswinder Singh <jassi.brar(a)samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <asm/mach-types.h> - -#include "../codecs/wm8580.h" -#include "dma.h" -#include "i2s.h" - -/* - * Default CFG switch settings to use this driver: - * - * SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On - */ - -/* SMDK has a 12MHZ crystal attached to WM8580 */ -#define SMDK_WM8580_FREQ 12000000 - -static int smdk_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - unsigned int pll_out; - int bfs, rfs, ret; - - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_U8: - case SNDRV_PCM_FORMAT_S8: - bfs = 16; - break; - case SNDRV_PCM_FORMAT_U16_LE: - case SNDRV_PCM_FORMAT_S16_LE: - bfs = 32; - break; - default: - return -EINVAL; - } - - /* The Fvco for WM8580 PLLs must fall within [90,100]MHz. - * This criterion can't be met if we request PLL output - * as {8000x256, 64000x256, 11025x256}Hz. - * As a wayout, we rather change rfs to a minimum value that - * results in (params_rate(params) * rfs), and itself, acceptable - * to both - the CODEC and the CPU. - */ - switch (params_rate(params)) { - case 16000: - case 22050: - case 32000: - case 44100: - case 48000: - case 88200: - case 96000: - rfs = 256; - break; - case 64000: - rfs = 384; - break; - case 8000: - case 11025: - rfs = 512; - break; - default: - return -EINVAL; - } - pll_out = params_rate(params) * rfs; - - /* Set the Codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S - | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* Set the AP DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S - | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBM_CFM); - if (ret < 0) - return ret; - - /* Set WM8580 to drive MCLK from its PLLA */ - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK, - WM8580_CLKSRC_PLLA); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0, - SMDK_WM8580_FREQ, pll_out); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA, - pll_out, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - return 0; -} - -/* - * SMDK WM8580 DAI operations. - */ -static struct snd_soc_ops smdk_ops = { - .hw_params = smdk_hw_params, -}; - -/* SMDK Playback widgets */ -static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = { - SND_SOC_DAPM_HP("Front", NULL), - SND_SOC_DAPM_HP("Center+Sub", NULL), - SND_SOC_DAPM_HP("Rear", NULL), -}; - -/* SMDK Capture widgets */ -static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = { - SND_SOC_DAPM_MIC("MicIn", NULL), - SND_SOC_DAPM_LINE("LineIn", NULL), -}; - -/* SMDK-PAIFTX connections */ -static const struct snd_soc_dapm_route audio_map_tx[] = { - /* MicIn feeds AINL */ - {"AINL", NULL, "MicIn"}, - - /* LineIn feeds AINL/R */ - {"AINL", NULL, "LineIn"}, - {"AINR", NULL, "LineIn"}, -}; - -/* SMDK-PAIFRX connections */ -static const struct snd_soc_dapm_route audio_map_rx[] = { - /* Front Left/Right are fed VOUT1L/R */ - {"Front", NULL, "VOUT1L"}, - {"Front", NULL, "VOUT1R"}, - - /* Center/Sub are fed VOUT2L/R */ - {"Center+Sub", NULL, "VOUT2L"}, - {"Center+Sub", NULL, "VOUT2R"}, - - /* Rear Left/Right are fed VOUT3L/R */ - {"Rear", NULL, "VOUT3L"}, - {"Rear", NULL, "VOUT3R"}, -}; - -static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - - /* Add smdk specific Capture widgets */ - snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_cpt, - ARRAY_SIZE(wm8580_dapm_widgets_cpt)); - - /* Set up PAIFTX audio path */ - snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx)); - - /* Enabling the microphone requires the fitting of a 0R - * resistor to connect the line from the microphone jack. - */ - snd_soc_dapm_disable_pin(codec, "MicIn"); - - /* signal a DAPM event */ - snd_soc_dapm_sync(codec); - - return 0; -} - -static int smdk_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - - /* Add smdk specific Playback widgets */ - snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_pbk, - ARRAY_SIZE(wm8580_dapm_widgets_pbk)); - - /* Set up PAIFRX audio path */ - snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx)); - - /* signal a DAPM event */ - snd_soc_dapm_sync(codec); - - return 0; -} - -enum { - PRI_PLAYBACK = 0, - PRI_CAPTURE, - SEC_PLAYBACK, -}; - -static struct snd_soc_dai_link smdk_dai[] = { - [PRI_PLAYBACK] = { /* Primary Playback i/f */ - .name = "WM8580 PAIF RX", - .stream_name = "Playback", - .cpu_dai_name = "samsung-i2s.2", - .codec_dai_name = "wm8580-hifi-playback", - .platform_name = "samsung-audio", - .codec_name = "wm8580-codec.0-001b", - .init = smdk_wm8580_init_paifrx, - .ops = &smdk_ops, - }, - [PRI_CAPTURE] = { /* Primary Capture i/f */ - .name = "WM8580 PAIF TX", - .stream_name = "Capture", - .cpu_dai_name = "samsung-i2s.2", - .codec_dai_name = "wm8580-hifi-capture", - .platform_name = "samsung-audio", - .codec_name = "wm8580-codec.0-001b", - .init = smdk_wm8580_init_paiftx, - .ops = &smdk_ops, - }, - [SEC_PLAYBACK] = { /* Sec_Fifo Playback i/f */ - .name = "Sec_FIFO TX", - .stream_name = "Playback", - .cpu_dai_name = "samsung-i2s.x", - .codec_dai_name = "wm8580-hifi-playback", - .platform_name = "samsung-audio", - .codec_name = "wm8580-codec.0-001b", - .init = smdk_wm8580_init_paifrx, - .ops = &smdk_ops, - }, -}; - -static struct snd_soc_card smdk = { - .name = "SMDK-I2S", - .dai_link = smdk_dai, - .num_links = 2, -}; - -static struct platform_device *smdk_snd_device; - -static int __init smdk_audio_init(void) -{ - int ret; - char *str; - - if (machine_is_smdkc100()) { - smdk.num_links = 3; - /* S5PC100 has I2S0 as v5 */ - str = (char *)smdk_dai[PRI_PLAYBACK].cpu_dai_name; - str[strlen(str) - 1] = '0'; - str = (char *)smdk_dai[PRI_CAPTURE].cpu_dai_name; - str[strlen(str) - 1] = '0'; - /* Secondary is at offset MAX_I2S from Primary */ - str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name; - str[strlen(str) - 1] = '0' + MAX_I2S; - } - - smdk_snd_device = platform_device_alloc("soc-audio", -1); - if (!smdk_snd_device) - return -ENOMEM; - - platform_set_drvdata(smdk_snd_device, &smdk); - ret = platform_device_add(smdk_snd_device); - - if (ret) - platform_device_put(smdk_snd_device); - - return ret; -} -module_init(smdk_audio_init); - -MODULE_AUTHOR("Jaswinder Singh, jassi.brar(a)samsung.com"); -MODULE_DESCRIPTION("ALSA SoC SMDK WM8580"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c deleted file mode 100644 index 7ce2430..0000000 --- a/sound/soc/s3c24xx/smdk_wm9713.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * smdk_wm9713.c -- SoC audio for SMDK - * - * Copyright 2010 Samsung Electronics Co. Ltd. - * Author: Jaswinder Singh Brar <jassi.brar(a)samsung.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <sound/soc.h> - -#include "dma.h" -#include "ac97.h" - -static struct snd_soc_card smdk; - -/* - * Default CFG switch settings to use this driver: - * - * SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off - * SMDKC100: Set CFG6 1-3 On, CFG7 1 On - * SMDKC110: Set CFGB10 1-2 Off, CFGB12 1-3 On - * SMDKV210: Set CFGB10 1-2 Off, CFGB12 1-3 On - */ - -/* - Playback (HeadPhone):- - $ amixer sset 'Headphone' unmute - $ amixer sset 'Right Headphone Out Mux' 'Headphone' - $ amixer sset 'Left Headphone Out Mux' 'Headphone' - $ amixer sset 'Right HP Mixer PCM' unmute - $ amixer sset 'Left HP Mixer PCM' unmute - - Capture (LineIn):- - $ amixer sset 'Right Capture Source' 'Line' - $ amixer sset 'Left Capture Source' 'Line' -*/ - -static struct snd_soc_dai_link smdk_dai = { - .name = "AC97", - .stream_name = "AC97 PCM", - .platform_name = "samsung-audio", - .cpu_dai_name = "samsung-ac97", - .codec_dai_name = "wm9713-hifi", - .codec_name = "wm9713-codec", -}; - -static struct snd_soc_card smdk = { - .name = "SMDK WM9713", - .dai_link = &smdk_dai, - .num_links = 1, -}; - -static struct platform_device *smdk_snd_wm9713_device; -static struct platform_device *smdk_snd_ac97_device; - -static int __init smdk_init(void) -{ - int ret; - - smdk_snd_wm9713_device = platform_device_alloc("wm9713-codec", -1); - if (!smdk_snd_wm9713_device) - return -ENOMEM; - - ret = platform_device_add(smdk_snd_wm9713_device); - if (ret) - goto err; - - smdk_snd_ac97_device = platform_device_alloc("soc-audio", -1); - if (!smdk_snd_ac97_device) { - ret = -ENOMEM; - goto err; - } - - platform_set_drvdata(smdk_snd_ac97_device, &smdk); - - ret = platform_device_add(smdk_snd_ac97_device); - if (ret) { - platform_device_put(smdk_snd_ac97_device); - goto err; - } - - return 0; -err: - platform_device_put(smdk_snd_wm9713_device); - return ret; -} - -static void __exit smdk_exit(void) -{ - platform_device_unregister(smdk_snd_ac97_device); - platform_device_unregister(smdk_snd_wm9713_device); -} - -module_init(smdk_init); -module_exit(smdk_exit); - -/* Module information */ -MODULE_AUTHOR("Jaswinder Singh Brar, jassi.brar(a)samsung.com"); -MODULE_DESCRIPTION("ALSA SoC SMDK+WM9713"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/spdif.c b/sound/soc/s3c24xx/spdif.c deleted file mode 100644 index dc85df3..0000000 --- a/sound/soc/s3c24xx/spdif.c +++ /dev/null @@ -1,501 +0,0 @@ -/* sound/soc/s3c24xx/spdif.c - * - * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clk.h> -#include <linux/io.h> - -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <plat/audio.h> -#include <mach/dma.h> - -#include "dma.h" -#include "spdif.h" - -/* Registers */ -#define CLKCON 0x00 -#define CON 0x04 -#define BSTAS 0x08 -#define CSTAS 0x0C -#define DATA_OUTBUF 0x10 -#define DCNT 0x14 -#define BSTAS_S 0x18 -#define DCNT_S 0x1C - -#define CLKCTL_MASK 0x7 -#define CLKCTL_MCLK_EXT (0x1 << 2) -#define CLKCTL_PWR_ON (0x1 << 0) - -#define CON_MASK 0x3ffffff -#define CON_FIFO_TH_SHIFT 19 -#define CON_FIFO_TH_MASK (0x7 << 19) -#define CON_USERDATA_23RDBIT (0x1 << 12) - -#define CON_SW_RESET (0x1 << 5) - -#define CON_MCLKDIV_MASK (0x3 << 3) -#define CON_MCLKDIV_256FS (0x0 << 3) -#define CON_MCLKDIV_384FS (0x1 << 3) -#define CON_MCLKDIV_512FS (0x2 << 3) - -#define CON_PCM_MASK (0x3 << 1) -#define CON_PCM_16BIT (0x0 << 1) -#define CON_PCM_20BIT (0x1 << 1) -#define CON_PCM_24BIT (0x2 << 1) - -#define CON_PCM_DATA (0x1 << 0) - -#define CSTAS_MASK 0x3fffffff -#define CSTAS_SAMP_FREQ_MASK (0xF << 24) -#define CSTAS_SAMP_FREQ_44 (0x0 << 24) -#define CSTAS_SAMP_FREQ_48 (0x2 << 24) -#define CSTAS_SAMP_FREQ_32 (0x3 << 24) -#define CSTAS_SAMP_FREQ_96 (0xA << 24) - -#define CSTAS_CATEGORY_MASK (0xFF << 8) -#define CSTAS_CATEGORY_CODE_CDP (0x01 << 8) - -#define CSTAS_NO_COPYRIGHT (0x1 << 2) - -/** - * struct samsung_spdif_info - Samsung S/PDIF Controller information - * @lock: Spin lock for S/PDIF. - * @dev: The parent device passed to use from the probe. - * @regs: The pointer to the device register block. - * @clk_rate: Current clock rate for calcurate ratio. - * @pclk: The peri-clock pointer for spdif master operation. - * @sclk: The source clock pointer for making sync signals. - * @save_clkcon: Backup clkcon reg. in suspend. - * @save_con: Backup con reg. in suspend. - * @save_cstas: Backup cstas reg. in suspend. - * @dma_playback: DMA information for playback channel. - */ -struct samsung_spdif_info { - spinlock_t lock; - struct device *dev; - void __iomem *regs; - unsigned long clk_rate; - struct clk *pclk; - struct clk *sclk; - u32 saved_clkcon; - u32 saved_con; - u32 saved_cstas; - struct s3c_dma_params *dma_playback; -}; - -static struct s3c2410_dma_client spdif_dma_client_out = { - .name = "S/PDIF Stereo out", -}; - -static struct s3c_dma_params spdif_stereo_out; -static struct samsung_spdif_info spdif_info; - -static inline struct samsung_spdif_info *to_info(struct snd_soc_dai *cpu_dai) -{ - return snd_soc_dai_get_drvdata(cpu_dai); -} - -static void spdif_snd_txctrl(struct samsung_spdif_info *spdif, int on) -{ - void __iomem *regs = spdif->regs; - u32 clkcon; - - dev_dbg(spdif->dev, "Entered %s\n", __func__); - - clkcon = readl(regs + CLKCON) & CLKCTL_MASK; - if (on) - writel(clkcon | CLKCTL_PWR_ON, regs + CLKCON); - else - writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON); -} - -static int spdif_set_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - struct samsung_spdif_info *spdif = to_info(cpu_dai); - u32 clkcon; - - dev_dbg(spdif->dev, "Entered %s\n", __func__); - - clkcon = readl(spdif->regs + CLKCON); - - if (clk_id == SND_SOC_SPDIF_INT_MCLK) - clkcon &= ~CLKCTL_MCLK_EXT; - else - clkcon |= CLKCTL_MCLK_EXT; - - writel(clkcon, spdif->regs + CLKCON); - - spdif->clk_rate = freq; - - return 0; -} - -static int spdif_trigger(struct snd_pcm_substream *substream, int cmd, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai); - unsigned long flags; - - dev_dbg(spdif->dev, "Entered %s\n", __func__); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - spin_lock_irqsave(&spdif->lock, flags); - spdif_snd_txctrl(spdif, 1); - spin_unlock_irqrestore(&spdif->lock, flags); - break; - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - spin_lock_irqsave(&spdif->lock, flags); - spdif_snd_txctrl(spdif, 0); - spin_unlock_irqrestore(&spdif->lock, flags); - break; - default: - return -EINVAL; - } - - return 0; -} - -static int spdif_sysclk_ratios[] = { - 512, 384, 256, -}; - -static int spdif_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *socdai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai); - void __iomem *regs = spdif->regs; - struct s3c_dma_params *dma_data; - u32 con, clkcon, cstas; - unsigned long flags; - int i, ratio; - - dev_dbg(spdif->dev, "Entered %s\n", __func__); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = spdif->dma_playback; - else { - dev_err(spdif->dev, "Capture is not supported\n"); - return -EINVAL; - } - - snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); - - spin_lock_irqsave(&spdif->lock, flags); - - con = readl(regs + CON) & CON_MASK; - cstas = readl(regs + CSTAS) & CSTAS_MASK; - clkcon = readl(regs + CLKCON) & CLKCTL_MASK; - - con &= ~CON_FIFO_TH_MASK; - con |= (0x7 << CON_FIFO_TH_SHIFT); - con |= CON_USERDATA_23RDBIT; - con |= CON_PCM_DATA; - - con &= ~CON_PCM_MASK; - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S16_LE: - con |= CON_PCM_16BIT; - break; - default: - dev_err(spdif->dev, "Unsupported data size.\n"); - goto err; - } - - ratio = spdif->clk_rate / params_rate(params); - for (i = 0; i < ARRAY_SIZE(spdif_sysclk_ratios); i++) - if (ratio == spdif_sysclk_ratios[i]) - break; - if (i == ARRAY_SIZE(spdif_sysclk_ratios)) { - dev_err(spdif->dev, "Invalid clock ratio %ld/%d\n", - spdif->clk_rate, params_rate(params)); - goto err; - } - - con &= ~CON_MCLKDIV_MASK; - switch (ratio) { - case 256: - con |= CON_MCLKDIV_256FS; - break; - case 384: - con |= CON_MCLKDIV_384FS; - break; - case 512: - con |= CON_MCLKDIV_512FS; - break; - } - - cstas &= ~CSTAS_SAMP_FREQ_MASK; - switch (params_rate(params)) { - case 44100: - cstas |= CSTAS_SAMP_FREQ_44; - break; - case 48000: - cstas |= CSTAS_SAMP_FREQ_48; - break; - case 32000: - cstas |= CSTAS_SAMP_FREQ_32; - break; - case 96000: - cstas |= CSTAS_SAMP_FREQ_96; - break; - default: - dev_err(spdif->dev, "Invalid sampling rate %d\n", - params_rate(params)); - goto err; - } - - cstas &= ~CSTAS_CATEGORY_MASK; - cstas |= CSTAS_CATEGORY_CODE_CDP; - cstas |= CSTAS_NO_COPYRIGHT; - - writel(con, regs + CON); - writel(cstas, regs + CSTAS); - writel(clkcon, regs + CLKCON); - - spin_unlock_irqrestore(&spdif->lock, flags); - - return 0; -err: - spin_unlock_irqrestore(&spdif->lock, flags); - return -EINVAL; -} - -static void spdif_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai); - void __iomem *regs = spdif->regs; - u32 con, clkcon; - - dev_dbg(spdif->dev, "Entered %s\n", __func__); - - con = readl(regs + CON) & CON_MASK; - clkcon = readl(regs + CLKCON) & CLKCTL_MASK; - - writel(con | CON_SW_RESET, regs + CON); - cpu_relax(); - - writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON); -} - -#ifdef CONFIG_PM -static int spdif_suspend(struct snd_soc_dai *cpu_dai) -{ - struct samsung_spdif_info *spdif = to_info(cpu_dai); - u32 con = spdif->saved_con; - - dev_dbg(spdif->dev, "Entered %s\n", __func__); - - spdif->saved_clkcon = readl(spdif->regs + CLKCON) & CLKCTL_MASK; - spdif->saved_con = readl(spdif->regs + CON) & CON_MASK; - spdif->saved_cstas = readl(spdif->regs + CSTAS) & CSTAS_MASK; - - writel(con | CON_SW_RESET, spdif->regs + CON); - cpu_relax(); - - return 0; -} - -static int spdif_resume(struct snd_soc_dai *cpu_dai) -{ - struct samsung_spdif_info *spdif = to_info(cpu_dai); - - dev_dbg(spdif->dev, "Entered %s\n", __func__); - - writel(spdif->saved_clkcon, spdif->regs + CLKCON); - writel(spdif->saved_con, spdif->regs + CON); - writel(spdif->saved_cstas, spdif->regs + CSTAS); - - return 0; -} -#else -#define spdif_suspend NULL -#define spdif_resume NULL -#endif - -static struct snd_soc_dai_ops spdif_dai_ops = { - .set_sysclk = spdif_set_sysclk, - .trigger = spdif_trigger, - .hw_params = spdif_hw_params, - .shutdown = spdif_shutdown, -}; - -struct snd_soc_dai_driver samsung_spdif_dai = { - .name = "samsung-spdif", - .playback = { - .stream_name = "S/PDIF Playback", - .channels_min = 2, - .channels_max = 2, - .rates = (SNDRV_PCM_RATE_32000 | - SNDRV_PCM_RATE_44100 | - SNDRV_PCM_RATE_48000 | - SNDRV_PCM_RATE_96000), - .formats = SNDRV_PCM_FMTBIT_S16_LE, }, - .ops = &spdif_dai_ops, - .suspend = spdif_suspend, - .resume = spdif_resume, -}; - -static __devinit int spdif_probe(struct platform_device *pdev) -{ - struct s3c_audio_pdata *spdif_pdata; - struct resource *mem_res, *dma_res; - struct samsung_spdif_info *spdif; - int ret; - - spdif_pdata = pdev->dev.platform_data; - - dev_dbg(&pdev->dev, "Entered %s\n", __func__); - - dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!dma_res) { - dev_err(&pdev->dev, "Unable to get dma resource.\n"); - return -ENXIO; - } - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem_res) { - dev_err(&pdev->dev, "Unable to get register resource.\n"); - return -ENXIO; - } - - if (spdif_pdata && spdif_pdata->cfg_gpio - && spdif_pdata->cfg_gpio(pdev)) { - dev_err(&pdev->dev, "Unable to configure GPIO pins\n"); - return -EINVAL; - } - - spdif = &spdif_info; - spdif->dev = &pdev->dev; - - spin_lock_init(&spdif->lock); - - spdif->pclk = clk_get(&pdev->dev, "spdif"); - if (IS_ERR(spdif->pclk)) { - dev_err(&pdev->dev, "failed to get peri-clock\n"); - ret = -ENOENT; - goto err0; - } - clk_enable(spdif->pclk); - - spdif->sclk = clk_get(&pdev->dev, "sclk_spdif"); - if (IS_ERR(spdif->sclk)) { - dev_err(&pdev->dev, "failed to get internal source clock\n"); - ret = -ENOENT; - goto err1; - } - clk_enable(spdif->sclk); - - /* Request S/PDIF Register's memory region */ - if (!request_mem_region(mem_res->start, - resource_size(mem_res), "samsung-spdif")) { - dev_err(&pdev->dev, "Unable to request register region\n"); - ret = -EBUSY; - goto err2; - } - - spdif->regs = ioremap(mem_res->start, 0x100); - if (spdif->regs == NULL) { - dev_err(&pdev->dev, "Cannot ioremap registers\n"); - ret = -ENXIO; - goto err3; - } - - dev_set_drvdata(&pdev->dev, spdif); - - ret = snd_soc_register_dai(&pdev->dev, &samsung_spdif_dai); - if (ret != 0) { - dev_err(&pdev->dev, "fail to register dai\n"); - goto err4; - } - - spdif_stereo_out.dma_size = 2; - spdif_stereo_out.client = &spdif_dma_client_out; - spdif_stereo_out.dma_addr = mem_res->start + DATA_OUTBUF; - spdif_stereo_out.channel = dma_res->start; - - spdif->dma_playback = &spdif_stereo_out; - - return 0; - -err4: - iounmap(spdif->regs); -err3: - release_mem_region(mem_res->start, resource_size(mem_res)); -err2: - clk_disable(spdif->sclk); - clk_put(spdif->sclk); -err1: - clk_disable(spdif->pclk); - clk_put(spdif->pclk); -err0: - return ret; -} - -static __devexit int spdif_remove(struct platform_device *pdev) -{ - struct samsung_spdif_info *spdif = &spdif_info; - struct resource *mem_res; - - snd_soc_unregister_dai(&pdev->dev); - - iounmap(spdif->regs); - - mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (mem_res) - release_mem_region(mem_res->start, resource_size(mem_res)); - - clk_disable(spdif->sclk); - clk_put(spdif->sclk); - clk_disable(spdif->pclk); - clk_put(spdif->pclk); - - return 0; -} - -static struct platform_driver samsung_spdif_driver = { - .probe = spdif_probe, - .remove = spdif_remove, - .driver = { - .name = "samsung-spdif", - .owner = THIS_MODULE, - }, -}; - -static int __init spdif_init(void) -{ - return platform_driver_register(&samsung_spdif_driver); -} -module_init(spdif_init); - -static void __exit spdif_exit(void) -{ - platform_driver_unregister(&samsung_spdif_driver); -} -module_exit(spdif_exit); - -MODULE_AUTHOR("Seungwhan Youn, <sw.youn(a)samsung.com>"); -MODULE_DESCRIPTION("Samsung S/PDIF Controller Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-spdif"); diff --git a/sound/soc/s3c24xx/spdif.h b/sound/soc/s3c24xx/spdif.h deleted file mode 100644 index 3ed5559..0000000 --- a/sound/soc/s3c24xx/spdif.h +++ /dev/null @@ -1,19 +0,0 @@ -/* sound/soc/s3c24xx/spdif.h - * - * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SND_SOC_SAMSUNG_SPDIF_H -#define __SND_SOC_SAMSUNG_SPDIF_H __FILE__ - -#define SND_SOC_SPDIF_INT_MCLK 0 -#define SND_SOC_SPDIF_EXT_MCLK 1 - -#endif /* __SND_SOC_SAMSUNG_SPDIF_H */ diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig new file mode 100644 index 0000000..140095e --- /dev/null +++ b/sound/soc/samsung/Kconfig @@ -0,0 +1,154 @@ +config ASOC_SAMSUNG + tristate "ASoC support for Samsung" + depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 + select S3C64XX_DMA if ARCH_S3C64XX + help + Say Y or M if you want to add support for codecs attached to + the Samsung SoCs' Audio interfaces. You will also need to + select the audio interfaces to support below. + +config SND_S3C24XX_I2S + tristate + select S3C2410_DMA + +config SND_S3C_I2SV2_SOC + tristate + +config SND_S3C2412_SOC_I2S + tristate + select SND_S3C_I2SV2_SOC + select S3C2410_DMA + +config SND_SAMSUNG_PCM + tristate + +config SND_SAMSUNG_AC97 + tristate + select SND_SOC_AC97_BUS + +config SND_SAMSUNG_SPDIF + tristate + select SND_SOC_SPDIF + +config SND_SAMSUNG_I2S + tristate + +config ASOC_SAMSUNG_NEO1973_WM8753 + tristate "SoC I2S Audio support for NEO1973 - WM8753" + depends on ASOC_SAMSUNG && MACH_NEO1973_GTA01 + select SND_S3C24XX_I2S + select SND_SOC_WM8753 + help + Say Y if you want to add support for SoC audio on smdk2440 + with the WM8753. + +config ASOC_SAMSUNG_NEO1973_GTA02_WM8753 + tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)" + depends on ASOC_SAMSUNG && MACH_NEO1973_GTA02 + select SND_S3C24XX_I2S + select SND_SOC_WM8753 + help + This driver provides audio support for the Openmoko Neo FreeRunner + smartphone. + +config ASOC_SAMSUNG_JIVE_WM8750 + tristate "SoC I2S Audio support for Jive" + depends on ASOC_SAMSUNG && MACH_JIVE + select SND_SOC_WM8750 + select SND_S3C2412_SOC_I2S + help + Sat Y if you want to add support for SoC audio on the Jive. + +config ASOC_SAMSUNG_SMDK_WM8580 + tristate "SoC I2S Audio support for WM8580 on SMDK" + depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100) + select SND_SOC_WM8580 + select SND_SAMSUNG_I2S + help + Say Y if you want to add support for SoC audio on the SMDKs. + +config ASOC_SAMSUNG_SMDK2443_WM9710 + tristate "SoC AC97 Audio support for SMDK2443 - WM9710" + depends on ASOC_SAMSUNG && MACH_SMDK2443 + select S3C2410_DMA + select AC97_BUS + select SND_SOC_AC97_CODEC + select SND_SAMSUNG_AC97 + help + Say Y if you want to add support for SoC audio on smdk2443 + with the WM9710. + +config ASOC_SAMSUNG_LN2440SBC_ALC650 + tristate "SoC AC97 Audio support for LN2440SBC - ALC650" + depends on ASOC_SAMSUNG && ARCH_S3C2410 + select S3C2410_DMA + select AC97_BUS + select SND_SOC_AC97_CODEC + select SND_SAMSUNG_AC97 + help + Say Y if you want to add support for SoC audio on ln2440sbc + with the ALC650. + +config ASOC_SAMSUNG_S3C24XX_UDA134X + tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" + depends on ASOC_SAMSUNG && ARCH_S3C2410 + select SND_S3C24XX_I2S + select SND_SOC_L3 + select SND_SOC_UDA134X + +config ASOC_SAMSUNG_SIMTEC + tristate + help + Internal node for common S3C24XX/Simtec suppor + +config ASOC_SAMSUNG_SIMTEC_TLV320AIC23 + tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" + depends on ASOC_SAMSUNG && ARCH_S3C2410 + select SND_S3C24XX_I2S + select SND_SOC_TLV320AIC23 + select ASOC_SAMSUNG_SIMTEC + +config ASOC_SAMSUNG_SIMTEC_HERMES + tristate "SoC I2S Audio support for Simtec Hermes board" + depends on ASOC_SAMSUNG && ARCH_S3C2410 + select SND_S3C24XX_I2S + select SND_SOC_TLV320AIC3X + select ASOC_SAMSUNG_SIMTEC + +config ASOC_SAMSUNG_RX1950_UDA1380 + tristate "Audio support for the HP iPAQ RX1950" + depends on ASOC_SAMSUNG && MACH_RX1950 + select SND_S3C24XX_I2S + select SND_SOC_UDA1380 + help + This driver provides audio support for HP iPAQ RX1950 PDA. + +config ASOC_SAMSUNG_SMDK_WM9713 + tristate "SoC AC97 Audio support for SMDK with WM9713" + depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) + select SND_SOC_WM9713 + select SND_SAMSUNG_AC97 + help + Sat Y if you want to add support for SoC audio on the SMDK. + +config ASOC_SMARTQ + tristate "SoC I2S Audio support for SmartQ board" + depends on ASOC_SAMSUNG && MACH_SMARTQ + select SND_SAMSUNG_I2S + select SND_SOC_WM8750 + +config ASOC_GONI_AQUILA_WM8994 + tristate "SoC I2S Audio support for AQUILA/GONI - WM8994" + depends on ASOC_SAMSUNG && (MACH_GONI || MACH_AQUILA) + select SND_SAMSUNG_I2S + select SND_SOC_WM8994 + help + Say Y if you want to add support for SoC audio on goni or aquila + with the WM8994. + +config ASOC_SAMSUNG_SMDK_SPDIF + tristate "SoC S/PDIF Audio support for SMDK" + depends on SND_S3C24XX_SOC && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210) + select SND_SAMSUNG_SPDIF + help + Say Y if you want to add support for SoC S/PDIF audio on the SMDK. diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile new file mode 100644 index 0000000..0d24f95 --- /dev/null +++ b/sound/soc/samsung/Makefile @@ -0,0 +1,51 @@ +# S3c24XX Platform Support +snd-soc-s3c24xx-objs := dma.o +snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o +snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o +snd-soc-ac97-objs := ac97.o +snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o +snd-soc-samsung-spdif-objs := spdif.o +snd-soc-pcm-objs := pcm.o +snd-soc-i2s-objs := i2s.o + +obj-$(CONFIG_ASOC_SAMSUNG) += snd-soc-s3c24xx.o +obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o +obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o +obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o +obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o +obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o +obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o +obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o + +# S3C24XX Machine Support +snd-soc-jive-wm8750-objs := jive_wm8750.o +snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o +snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o +snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o +snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o +snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o +snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o +snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o +snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o +snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o +snd-soc-smdk-wm8580-objs := smdk_wm8580.o +snd-soc-smdk-wm9713-objs := smdk_wm9713.o +snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o +snd-soc-goni-wm8994-objs := goni_wm8994.o +snd-soc-smdk-spdif-objs := smdk_spdif.o + +obj-$(CONFIG_ASOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o +obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o +obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o +obj-$(CONFIG_ASOC_SAMSUNG_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o +obj-$(CONFIG_ASOC_SAMSUNG_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o +obj-$(CONFIG_ASOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o +obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o +obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o +obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o +obj-$(CONFIG_ASOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o +obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o +obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o +obj-$(CONFIG_ASOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o +obj-$(CONFIG_ASOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o +obj-$(CONFIG_ASOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c new file mode 100644 index 0000000..4770a95 --- /dev/null +++ b/sound/soc/samsung/ac97.c @@ -0,0 +1,520 @@ +/* sound/soc/samsung/ac97.c + * + * ALSA SoC Audio Layer - S3C AC97 Controller driver + * Evolved from s3c2443-ac97.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh <jassi.brar(a)samsung.com> + * Credits: Graeme Gregory, Sean Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/clk.h> + +#include <sound/soc.h> + +#include <plat/regs-ac97.h> +#include <mach/dma.h> +#include <plat/audio.h> + +#include "dma.h" +#include "ac97.h" + +#define AC_CMD_ADDR(x) (x << 16) +#define AC_CMD_DATA(x) (x & 0xffff) + +struct s3c_ac97_info { + struct clk *ac97_clk; + void __iomem *regs; + struct mutex lock; + struct completion done; +}; +static struct s3c_ac97_info s3c_ac97; + +static struct s3c2410_dma_client s3c_dma_client_out = { + .name = "AC97 PCMOut" +}; + +static struct s3c2410_dma_client s3c_dma_client_in = { + .name = "AC97 PCMIn" +}; + +static struct s3c2410_dma_client s3c_dma_client_micin = { + .name = "AC97 MicIn" +}; + +static struct s3c_dma_params s3c_ac97_pcm_out = { + .client = &s3c_dma_client_out, + .dma_size = 4, +}; + +static struct s3c_dma_params s3c_ac97_pcm_in = { + .client = &s3c_dma_client_in, + .dma_size = 4, +}; + +static struct s3c_dma_params s3c_ac97_mic_in = { + .client = &s3c_dma_client_micin, + .dma_size = 4, +}; + +static void s3c_ac97_activate(struct snd_ac97 *ac97) +{ + u32 ac_glbctrl, stat; + + stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7; + if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE) + return; /* Return if already active */ + + INIT_COMPLETION(s3c_ac97.done); + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON; + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + msleep(1); + + ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE; + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + msleep(1); + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE; + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + + if (!wait_for_completion_timeout(&s3c_ac97.done, HZ)) + pr_err("AC97: Unable to activate!"); +} + +static unsigned short s3c_ac97_read(struct snd_ac97 *ac97, + unsigned short reg) +{ + u32 ac_glbctrl, ac_codec_cmd; + u32 stat, addr, data; + + mutex_lock(&s3c_ac97.lock); + + s3c_ac97_activate(ac97); + + INIT_COMPLETION(s3c_ac97.done); + + ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD); + ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg); + writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD); + + udelay(50); + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE; + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + + if (!wait_for_completion_timeout(&s3c_ac97.done, HZ)) + pr_err("AC97: Unable to read!"); + + stat = readl(s3c_ac97.regs + S3C_AC97_STAT); + addr = (stat >> 16) & 0x7f; + data = (stat & 0xffff); + + if (addr != reg) + pr_err("ac97: req addr = %02x, rep addr = %02x\n", + reg, addr); + + mutex_unlock(&s3c_ac97.lock); + + return (unsigned short)data; +} + +static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + u32 ac_glbctrl, ac_codec_cmd; + + mutex_lock(&s3c_ac97.lock); + + s3c_ac97_activate(ac97); + + INIT_COMPLETION(s3c_ac97.done); + + ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD); + ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val); + writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD); + + udelay(50); + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE; + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + + if (!wait_for_completion_timeout(&s3c_ac97.done, HZ)) + pr_err("AC97: Unable to write!"); + + ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD); + ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ; + writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD); + + mutex_unlock(&s3c_ac97.lock); +} + +static void s3c_ac97_cold_reset(struct snd_ac97 *ac97) +{ + pr_debug("AC97: Cold reset\n"); + writel(S3C_AC97_GLBCTRL_COLDRESET, + s3c_ac97.regs + S3C_AC97_GLBCTRL); + msleep(1); + + writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL); + msleep(1); +} + +static void s3c_ac97_warm_reset(struct snd_ac97 *ac97) +{ + u32 stat; + + stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7; + if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE) + return; /* Return if already active */ + + pr_debug("AC97: Warm reset\n"); + + writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL); + msleep(1); + + writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL); + msleep(1); + + s3c_ac97_activate(ac97); +} + +static irqreturn_t s3c_ac97_irq(int irq, void *dev_id) +{ + u32 ac_glbctrl, ac_glbstat; + + ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT); + + if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) { + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE; + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + + complete(&s3c_ac97.done); + } + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + ac_glbctrl |= (1<<30); /* Clear interrupt */ + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + + return IRQ_HANDLED; +} + +struct snd_ac97_bus_ops soc_ac97_ops = { + .read = s3c_ac97_read, + .write = s3c_ac97_write, + .warm_reset = s3c_ac97_warm_reset, + .reset = s3c_ac97_cold_reset, +}; +EXPORT_SYMBOL_GPL(soc_ac97_ops); + +static int s3c_ac97_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct s3c_dma_params *dma_data; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dma_data = &s3c_ac97_pcm_out; + else + dma_data = &s3c_ac97_pcm_in; + + snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); + + return 0; +} + +static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + u32 ac_glbctrl; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s3c_dma_params *dma_data = + snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK; + else + ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA; + else + ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA; + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + break; + } + + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + + s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + + return 0; +} + +static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + return -ENODEV; + else + snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in); + + return 0; +} + +static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + u32 ac_glbctrl; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s3c_dma_params *dma_data = + snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + + ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL); + ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA; + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + break; + } + + writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); + + s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + + return 0; +} + +static struct snd_soc_dai_ops s3c_ac97_dai_ops = { + .hw_params = s3c_ac97_hw_params, + .trigger = s3c_ac97_trigger, +}; + +static struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = { + .hw_params = s3c_ac97_hw_mic_params, + .trigger = s3c_ac97_mic_trigger, +}; + +static struct snd_soc_dai_driver s3c_ac97_dai[] = { + [S3C_AC97_DAI_PCM] = { + .name = "samsung-ac97", + .ac97_control = 1, + .playback = { + .stream_name = "AC97 Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .stream_name = "AC97 Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = &s3c_ac97_dai_ops, + }, + [S3C_AC97_DAI_MIC] = { + .name = "samsung-ac97-mic", + .ac97_control = 1, + .capture = { + .stream_name = "AC97 Mic Capture", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = &s3c_ac97_mic_dai_ops, + }, +}; + +static __devinit int s3c_ac97_probe(struct platform_device *pdev) +{ + struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res; + struct s3c_audio_pdata *ac97_pdata; + int ret; + + ac97_pdata = pdev->dev.platform_data; + if (!ac97_pdata || !ac97_pdata->cfg_gpio) { + dev_err(&pdev->dev, "cfg_gpio callback not provided!\n"); + return -EINVAL; + } + + /* Check for availability of necessary resource */ + dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dmatx_res) { + dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n"); + return -ENXIO; + } + + dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!dmarx_res) { + dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n"); + return -ENXIO; + } + + dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2); + if (!dmamic_res) { + dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n"); + return -ENXIO; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_res) { + dev_err(&pdev->dev, "Unable to get register resource\n"); + return -ENXIO; + } + + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq_res) { + dev_err(&pdev->dev, "AC97 IRQ not provided!\n"); + return -ENXIO; + } + + if (!request_mem_region(mem_res->start, + resource_size(mem_res), "ac97")) { + dev_err(&pdev->dev, "Unable to request register region\n"); + return -EBUSY; + } + + s3c_ac97_pcm_out.channel = dmatx_res->start; + s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA; + s3c_ac97_pcm_in.channel = dmarx_res->start; + s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA; + s3c_ac97_mic_in.channel = dmamic_res->start; + s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA; + + init_completion(&s3c_ac97.done); + mutex_init(&s3c_ac97.lock); + + s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res)); + if (s3c_ac97.regs == NULL) { + dev_err(&pdev->dev, "Unable to ioremap register region\n"); + ret = -ENXIO; + goto err1; + } + + s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97"); + if (IS_ERR(s3c_ac97.ac97_clk)) { + dev_err(&pdev->dev, "ac97 failed to get ac97_clock\n"); + ret = -ENODEV; + goto err2; + } + clk_enable(s3c_ac97.ac97_clk); + + if (ac97_pdata->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to configure gpio\n"); + ret = -EINVAL; + goto err3; + } + + ret = request_irq(irq_res->start, s3c_ac97_irq, + IRQF_DISABLED, "AC97", NULL); + if (ret < 0) { + dev_err(&pdev->dev, "ac97: interrupt request failed.\n"); + goto err4; + } + + ret = snd_soc_register_dais(&pdev->dev, s3c_ac97_dai, + ARRAY_SIZE(s3c_ac97_dai)); + if (ret) + goto err5; + + return 0; + +err5: + free_irq(irq_res->start, NULL); +err4: +err3: + clk_disable(s3c_ac97.ac97_clk); + clk_put(s3c_ac97.ac97_clk); +err2: + iounmap(s3c_ac97.regs); +err1: + release_mem_region(mem_res->start, resource_size(mem_res)); + + return ret; +} + +static __devexit int s3c_ac97_remove(struct platform_device *pdev) +{ + struct resource *mem_res, *irq_res; + + snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(s3c_ac97_dai)); + + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (irq_res) + free_irq(irq_res->start, NULL); + + clk_disable(s3c_ac97.ac97_clk); + clk_put(s3c_ac97.ac97_clk); + + iounmap(s3c_ac97.regs); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res) + release_mem_region(mem_res->start, resource_size(mem_res)); + + return 0; +} + +static struct platform_driver s3c_ac97_driver = { + .probe = s3c_ac97_probe, + .remove = s3c_ac97_remove, + .driver = { + .name = "samsung-ac97", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c_ac97_init(void) +{ + return platform_driver_register(&s3c_ac97_driver); +} +module_init(s3c_ac97_init); + +static void __exit s3c_ac97_exit(void) +{ + platform_driver_unregister(&s3c_ac97_driver); +} +module_exit(s3c_ac97_exit); + +MODULE_AUTHOR("Jaswinder Singh, <jassi.brar(a)samsung.com>"); +MODULE_DESCRIPTION("AC97 driver for the Samsung SoC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-ac97"); diff --git a/sound/soc/samsung/ac97.h b/sound/soc/samsung/ac97.h new file mode 100644 index 0000000..0d0e1b5 --- /dev/null +++ b/sound/soc/samsung/ac97.h @@ -0,0 +1,21 @@ +/* sound/soc/samsung/ac97.h + * + * ALSA SoC Audio Layer - S3C AC97 Controller driver + * Evolved from s3c2443-ac97.h + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh <jassi.brar(a)samsung.com> + * Credits: Graeme Gregory, Sean Choi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C_AC97_H_ +#define __S3C_AC97_H_ + +#define S3C_AC97_DAI_PCM 0 +#define S3C_AC97_DAI_MIC 1 + +#endif /* __S3C_AC97_H_ */ diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c new file mode 100644 index 0000000..12622f3 --- /dev/null +++ b/sound/soc/samsung/dma.c @@ -0,0 +1,503 @@ +/* + * dma.c -- ALSA Soc Audio Layer + * + * (c) 2006 Wolfson Microelectronics PLC. + * Graeme Gregory graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * Copyright 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben(a)simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <asm/dma.h> +#include <mach/hardware.h> +#include <mach/dma.h> + +#include "dma.h" + +static const struct snd_pcm_hardware dma_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_U16_LE | + SNDRV_PCM_FMTBIT_U8 | + SNDRV_PCM_FMTBIT_S8, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 128*1024, + .period_bytes_min = PAGE_SIZE, + .period_bytes_max = PAGE_SIZE*2, + .periods_min = 2, + .periods_max = 128, + .fifo_size = 32, +}; + +struct runtime_data { + spinlock_t lock; + int state; + unsigned int dma_loaded; + unsigned int dma_limit; + unsigned int dma_period; + dma_addr_t dma_start; + dma_addr_t dma_pos; + dma_addr_t dma_end; + struct s3c_dma_params *params; +}; + +/* dma_enqueue + * + * place a dma buffer onto the queue for the dma system + * to handle. +*/ +static void dma_enqueue(struct snd_pcm_substream *substream) +{ + struct runtime_data *prtd = substream->runtime->private_data; + dma_addr_t pos = prtd->dma_pos; + unsigned int limit; + int ret; + + pr_debug("Entered %s\n", __func__); + + if (s3c_dma_has_circular()) + limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; + else + limit = prtd->dma_limit; + + pr_debug("%s: loaded %d, limit %d\n", + __func__, prtd->dma_loaded, limit); + + while (prtd->dma_loaded < limit) { + unsigned long len = prtd->dma_period; + + pr_debug("dma_loaded: %d\n", prtd->dma_loaded); + + if ((pos + len) > prtd->dma_end) { + len = prtd->dma_end - pos; + pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n", + __func__, len); + } + + ret = s3c2410_dma_enqueue(prtd->params->channel, + substream, pos, len); + + if (ret == 0) { + prtd->dma_loaded++; + pos += prtd->dma_period; + if (pos >= prtd->dma_end) + pos = prtd->dma_start; + } else + break; + } + + prtd->dma_pos = pos; +} + +static void audio_buffdone(struct s3c2410_dma_chan *channel, + void *dev_id, int size, + enum s3c2410_dma_buffresult result) +{ + struct snd_pcm_substream *substream = dev_id; + struct runtime_data *prtd; + + pr_debug("Entered %s\n", __func__); + + if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR) + return; + + prtd = substream->runtime->private_data; + + if (substream) + snd_pcm_period_elapsed(substream); + + spin_lock(&prtd->lock); + if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) { + prtd->dma_loaded--; + dma_enqueue(substream); + } + + spin_unlock(&prtd->lock); +} + +static int dma_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + unsigned long totbytes = params_buffer_bytes(params); + struct s3c_dma_params *dma = + snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + int ret = 0; + + + pr_debug("Entered %s\n", __func__); + + /* return if this is a bufferless transfer e.g. + * codec <--> BT codec or GSM modem -- lg FIXME */ + if (!dma) + return 0; + + /* this may get called several times by oss emulation + * with different params -HW */ + if (prtd->params == NULL) { + /* prepare DMA */ + prtd->params = dma; + + pr_debug("params %p, client %p, channel %d\n", prtd->params, + prtd->params->client, prtd->params->channel); + + ret = s3c2410_dma_request(prtd->params->channel, + prtd->params->client, NULL); + + if (ret < 0) { + printk(KERN_ERR "failed to get dma channel\n"); + return ret; + } + + /* use the circular buffering if we have it available. */ + if (s3c_dma_has_circular()) + s3c2410_dma_setflags(prtd->params->channel, + S3C2410_DMAF_CIRCULAR); + } + + s3c2410_dma_set_buffdone_fn(prtd->params->channel, + audio_buffdone); + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + + runtime->dma_bytes = totbytes; + + spin_lock_irq(&prtd->lock); + prtd->dma_loaded = 0; + prtd->dma_limit = runtime->hw.periods_min; + prtd->dma_period = params_period_bytes(params); + prtd->dma_start = runtime->dma_addr; + prtd->dma_pos = prtd->dma_start; + prtd->dma_end = prtd->dma_start + totbytes; + spin_unlock_irq(&prtd->lock); + + return 0; +} + +static int dma_hw_free(struct snd_pcm_substream *substream) +{ + struct runtime_data *prtd = substream->runtime->private_data; + + pr_debug("Entered %s\n", __func__); + + /* TODO - do we need to ensure DMA flushed */ + snd_pcm_set_runtime_buffer(substream, NULL); + + if (prtd->params) { + s3c2410_dma_free(prtd->params->channel, prtd->params->client); + prtd->params = NULL; + } + + return 0; +} + +static int dma_prepare(struct snd_pcm_substream *substream) +{ + struct runtime_data *prtd = substream->runtime->private_data; + int ret = 0; + + pr_debug("Entered %s\n", __func__); + + /* return if this is a bufferless transfer e.g. + * codec <--> BT codec or GSM modem -- lg FIXME */ + if (!prtd->params) + return 0; + + /* channel needs configuring for mem=>device, increment memory addr, + * sync to pclk, half-word transfers to the IIS-FIFO. */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + s3c2410_dma_devconfig(prtd->params->channel, + S3C2410_DMASRC_MEM, + prtd->params->dma_addr); + } else { + s3c2410_dma_devconfig(prtd->params->channel, + S3C2410_DMASRC_HW, + prtd->params->dma_addr); + } + + s3c2410_dma_config(prtd->params->channel, + prtd->params->dma_size); + + /* flush the DMA channel */ + s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH); + prtd->dma_loaded = 0; + prtd->dma_pos = prtd->dma_start; + + /* enqueue dma buffers */ + dma_enqueue(substream); + + return ret; +} + +static int dma_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct runtime_data *prtd = substream->runtime->private_data; + int ret = 0; + + pr_debug("Entered %s\n", __func__); + + spin_lock(&prtd->lock); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + prtd->state |= ST_RUNNING; + s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + prtd->state &= ~ST_RUNNING; + s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP); + break; + + default: + ret = -EINVAL; + break; + } + + spin_unlock(&prtd->lock); + + return ret; +} + +static snd_pcm_uframes_t +dma_pointer(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct runtime_data *prtd = runtime->private_data; + unsigned long res; + dma_addr_t src, dst; + + pr_debug("Entered %s\n", __func__); + + spin_lock(&prtd->lock); + s3c2410_dma_getposition(prtd->params->channel, &src, &dst); + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + res = dst - prtd->dma_start; + else + res = src - prtd->dma_start; + + spin_unlock(&prtd->lock); + + pr_debug("Pointer %x %x\n", src, dst); + + /* we seem to be getting the odd error from the pcm library due + * to out-of-bounds pointers. this is maybe due to the dma engine + * not having loaded the new values for the channel before being + * callled... (todo - fix ) + */ + + if (res >= snd_pcm_lib_buffer_bytes(substream)) { + if (res == snd_pcm_lib_buffer_bytes(substream)) + res = 0; + } + + return bytes_to_frames(substream->runtime, res); +} + +static int dma_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct runtime_data *prtd; + + pr_debug("Entered %s\n", __func__); + + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + snd_soc_set_runtime_hwparams(substream, &dma_hardware); + + prtd = kzalloc(sizeof(struct runtime_data), GFP_KERNEL); + if (prtd == NULL) + return -ENOMEM; + + spin_lock_init(&prtd->lock); + + runtime->private_data = prtd; + return 0; +} + +static int dma_close(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct runtime_data *prtd = runtime->private_data; + + pr_debug("Entered %s\n", __func__); + + if (!prtd) + pr_debug("dma_close called with prtd == NULL\n"); + + kfree(prtd); + + return 0; +} + +static int dma_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + pr_debug("Entered %s\n", __func__); + + return dma_mmap_writecombine(substream->pcm->card->dev, vma, + runtime->dma_area, + runtime->dma_addr, + runtime->dma_bytes); +} + +static struct snd_pcm_ops dma_ops = { + .open = dma_open, + .close = dma_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = dma_hw_params, + .hw_free = dma_hw_free, + .prepare = dma_prepare, + .trigger = dma_trigger, + .pointer = dma_pointer, + .mmap = dma_mmap, +}; + +static int preallocate_dma_buffer(struct snd_pcm *pcm, int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = dma_hardware.buffer_bytes_max; + + pr_debug("Entered %s\n", __func__); + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_writecombine(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + if (!buf->area) + return -ENOMEM; + buf->bytes = size; + return 0; +} + +static void dma_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + pr_debug("Entered %s\n", __func__); + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + + dma_free_writecombine(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +static u64 dma_mask = DMA_BIT_MASK(32); + +static int dma_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + int ret = 0; + + pr_debug("Entered %s\n", __func__); + + if (!card->dev->dma_mask) + card->dev->dma_mask = &dma_mask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->driver->playback.channels_min) { + ret = preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->driver->capture.channels_min) { + ret = preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } +out: + return ret; +} + +static struct snd_soc_platform_driver samsung_asoc_platform = { + .ops = &dma_ops, + .pcm_new = dma_new, + .pcm_free = dma_free_dma_buffers, +}; + +static int __devinit samsung_asoc_platform_probe(struct platform_device *pdev) +{ + return snd_soc_register_platform(&pdev->dev, &samsung_asoc_platform); +} + +static int __devexit samsung_asoc_platform_remove(struct platform_device *pdev) +{ + snd_soc_unregister_platform(&pdev->dev); + return 0; +} + +static struct platform_driver asoc_dma_driver = { + .driver = { + .name = "samsung-audio", + .owner = THIS_MODULE, + }, + + .probe = samsung_asoc_platform_probe, + .remove = __devexit_p(samsung_asoc_platform_remove), +}; + +static int __init samsung_asoc_init(void) +{ + return platform_driver_register(&asoc_dma_driver); +} +module_init(samsung_asoc_init); + +static void __exit samsung_asoc_exit(void) +{ + platform_driver_unregister(&asoc_dma_driver); +} +module_exit(samsung_asoc_exit); + +MODULE_AUTHOR("Ben Dooks, <ben(a)simtec.co.uk>"); +MODULE_DESCRIPTION("Samsung ASoC DMA Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-audio"); diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h new file mode 100644 index 0000000..f8cd2b4 --- /dev/null +++ b/sound/soc/samsung/dma.h @@ -0,0 +1,30 @@ +/* + * dma.h -- + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * ALSA PCM interface for the Samsung S3C24xx CPU + */ + +#ifndef _S3C_AUDIO_H +#define _S3C_AUDIO_H + +#define ST_RUNNING (1<<0) +#define ST_OPENED (1<<1) + +struct s3c_dma_params { + struct s3c2410_dma_client *client; /* stream identifier */ + int channel; /* Channel ID */ + dma_addr_t dma_addr; + int dma_size; /* Size of the DMA transfer */ +}; + +#define S3C24XX_DAI_I2S 0 + +/* platform data */ +extern struct snd_ac97_bus_ops s3c24xx_ac97_ops; + +#endif diff --git a/sound/soc/samsung/goni_wm8994.c b/sound/soc/samsung/goni_wm8994.c new file mode 100644 index 0000000..dcaf7c3 --- /dev/null +++ b/sound/soc/samsung/goni_wm8994.c @@ -0,0 +1,309 @@ +/* + * goni_wm8994.c + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Chanwoo Choi <cw00.choi(a)samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> +#include <asm/mach-types.h> +#include <mach/gpio.h> +#include <mach/regs-clock.h> + +#include <linux/mfd/wm8994/core.h> +#include <linux/mfd/wm8994/registers.h> +#include "../codecs/wm8994.h" +#include "dma.h" +#include "i2s.h" + +#define MACHINE_NAME 0 +#define CPU_VOICE_DAI 1 + +static const char *aquila_str[] = { + [MACHINE_NAME] = "aquila", + [CPU_VOICE_DAI] = "aquila-voice-dai", +}; + +static struct snd_soc_card goni; +static struct platform_device *goni_snd_device; + +/* 3.5 pie jack */ +static struct snd_soc_jack jack; + +/* 3.5 pie jack detection DAPM pins */ +static struct snd_soc_jack_pin jack_pins[] = { + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, { + .pin = "Headset Stereophone", + .mask = SND_JACK_HEADPHONE | SND_JACK_MECHANICAL | + SND_JACK_AVOUT, + }, +}; + +/* 3.5 pie jack detection gpios */ +static struct snd_soc_jack_gpio jack_gpios[] = { + { + .gpio = S5PV210_GPH0(6), + .name = "DET_3.5", + .report = SND_JACK_HEADSET | SND_JACK_MECHANICAL | + SND_JACK_AVOUT, + .debounce_time = 200, + }, +}; + +static const struct snd_soc_dapm_widget goni_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Ext Left Spk", NULL), + SND_SOC_DAPM_SPK("Ext Right Spk", NULL), + SND_SOC_DAPM_SPK("Ext Rcv", NULL), + SND_SOC_DAPM_HP("Headset Stereophone", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Main Mic", NULL), + SND_SOC_DAPM_MIC("2nd Mic", NULL), + SND_SOC_DAPM_LINE("Radio In", NULL), +}; + +static const struct snd_soc_dapm_route goni_dapm_routes[] = { + {"Ext Left Spk", NULL, "SPKOUTLP"}, + {"Ext Left Spk", NULL, "SPKOUTLN"}, + + {"Ext Right Spk", NULL, "SPKOUTRP"}, + {"Ext Right Spk", NULL, "SPKOUTRN"}, + + {"Ext Rcv", NULL, "HPOUT2N"}, + {"Ext Rcv", NULL, "HPOUT2P"}, + + {"Headset Stereophone", NULL, "HPOUT1L"}, + {"Headset Stereophone", NULL, "HPOUT1R"}, + + {"IN1RN", NULL, "Headset Mic"}, + {"IN1RP", NULL, "Headset Mic"}, + + {"IN1RN", NULL, "2nd Mic"}, + {"IN1RP", NULL, "2nd Mic"}, + + {"IN1LN", NULL, "Main Mic"}, + {"IN1LP", NULL, "Main Mic"}, + + {"IN2LN", NULL, "Radio In"}, + {"IN2RN", NULL, "Radio In"}, +}; + +static int goni_wm8994_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int ret; + + /* add goni specific widgets */ + snd_soc_dapm_new_controls(codec, goni_dapm_widgets, + ARRAY_SIZE(goni_dapm_widgets)); + + /* set up goni specific audio routes */ + snd_soc_dapm_add_routes(codec, goni_dapm_routes, + ARRAY_SIZE(goni_dapm_routes)); + + /* set endpoints to not connected */ + snd_soc_dapm_nc_pin(codec, "IN2LP:VXRN"); + snd_soc_dapm_nc_pin(codec, "IN2RP:VXRP"); + snd_soc_dapm_nc_pin(codec, "LINEOUT1N"); + snd_soc_dapm_nc_pin(codec, "LINEOUT1P"); + snd_soc_dapm_nc_pin(codec, "LINEOUT2N"); + snd_soc_dapm_nc_pin(codec, "LINEOUT2P"); + + if (machine_is_aquila()) { + snd_soc_dapm_nc_pin(codec, "SPKOUTRN"); + snd_soc_dapm_nc_pin(codec, "SPKOUTRP"); + } + + snd_soc_dapm_sync(codec); + + /* Headset jack detection */ + ret = snd_soc_jack_new(&goni, "Headset Jack", + SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT, + &jack); + if (ret) + return ret; + + ret = snd_soc_jack_add_pins(&jack, ARRAY_SIZE(jack_pins), jack_pins); + if (ret) + return ret; + + ret = snd_soc_jack_add_gpios(&jack, ARRAY_SIZE(jack_gpios), jack_gpios); + if (ret) + return ret; + + return 0; +} + +static int goni_hifi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + unsigned int pll_out = 24000000; + int ret = 0; + + /* set the cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set the codec FLL */ + ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, 0, pll_out, + params_rate(params) * 256); + if (ret < 0) + return ret; + + /* set the codec system clock */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1, + params_rate(params) * 256, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops goni_hifi_ops = { + .hw_params = goni_hifi_hw_params, +}; + +static int goni_voice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + unsigned int pll_out = 24000000; + int ret = 0; + + if (params_rate(params) != 8000) + return -EINVAL; + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J | + SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set the codec FLL */ + ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL2, 0, pll_out, + params_rate(params) * 256); + if (ret < 0) + return ret; + + /* set the codec system clock */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL2, + params_rate(params) * 256, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_dai_driver voice_dai = { + .name = "goni-voice-dai", + .id = 0, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, +}; + +static struct snd_soc_ops goni_voice_ops = { + .hw_params = goni_voice_hw_params, +}; + +static struct snd_soc_dai_link goni_dai[] = { +{ + .name = "WM8994", + .stream_name = "WM8994 HiFi", + .cpu_dai_name = "samsung-i2s.0", + .codec_dai_name = "wm8994-hifi", + .platform_name = "samsung-audio", + .codec_name = "wm8994-codec.0-0x1a", + .init = goni_wm8994_init, + .ops = &goni_hifi_ops, +}, { + .name = "WM8994 Voice", + .stream_name = "Voice", + .cpu_dai_name = "goni-voice-dai", + .codec_dai_name = "wm8994-voice", + .platform_name = "samsung-audio", + .codec_name = "wm8994-codec.0-0x1a", + .ops = &goni_voice_ops, +}, +}; + +static struct snd_soc_card goni = { + .name = "goni", + .dai_link = goni_dai, + .num_links = ARRAY_SIZE(goni_dai), +}; + +static int __init goni_init(void) +{ + int ret; + + if (machine_is_aquila()) { + voice_dai.name = aquila_str[CPU_VOICE_DAI]; + goni_dai[1].cpu_dai_name = aquila_str[CPU_VOICE_DAI]; + goni.name = aquila_str[MACHINE_NAME]; + } else if (!machine_is_goni()) + return -ENODEV; + + goni_snd_device = platform_device_alloc("soc-audio", -1); + if (!goni_snd_device) + return -ENOMEM; + + /* register voice DAI here */ + ret = snd_soc_register_dai(&goni_snd_device->dev, &voice_dai); + if (ret) + return ret; + + platform_set_drvdata(goni_snd_device, &goni); + ret = platform_device_add(goni_snd_device); + + if (ret) + platform_device_put(goni_snd_device); + + return ret; +} + +static void __exit goni_exit(void) +{ + platform_device_unregister(goni_snd_device); +} + +module_init(goni_init); +module_exit(goni_exit); + +/* Module information */ +MODULE_DESCRIPTION("ALSA SoC WM8994 GONI(S5PV210)"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi(a)samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c new file mode 100644 index 0000000..d5d8975 --- /dev/null +++ b/sound/soc/samsung/i2s.c @@ -0,0 +1,1251 @@ +/* sound/soc/samsung/i2s.c + * + * ALSA SoC Audio Layer - Samsung I2S Controller driver + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar(a)samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <plat/audio.h> + +#include "dma.h" +#include "i2s.h" + +#define I2SCON 0x0 +#define I2SMOD 0x4 +#define I2SFIC 0x8 +#define I2SPSR 0xc +#define I2STXD 0x10 +#define I2SRXD 0x14 +#define I2SFICS 0x18 +#define I2STXDS 0x1c + +#define CON_RSTCLR (1 << 31) +#define CON_FRXOFSTATUS (1 << 26) +#define CON_FRXORINTEN (1 << 25) +#define CON_FTXSURSTAT (1 << 24) +#define CON_FTXSURINTEN (1 << 23) +#define CON_TXSDMA_PAUSE (1 << 20) +#define CON_TXSDMA_ACTIVE (1 << 18) + +#define CON_FTXURSTATUS (1 << 17) +#define CON_FTXURINTEN (1 << 16) +#define CON_TXFIFO2_EMPTY (1 << 15) +#define CON_TXFIFO1_EMPTY (1 << 14) +#define CON_TXFIFO2_FULL (1 << 13) +#define CON_TXFIFO1_FULL (1 << 12) + +#define CON_LRINDEX (1 << 11) +#define CON_TXFIFO_EMPTY (1 << 10) +#define CON_RXFIFO_EMPTY (1 << 9) +#define CON_TXFIFO_FULL (1 << 8) +#define CON_RXFIFO_FULL (1 << 7) +#define CON_TXDMA_PAUSE (1 << 6) +#define CON_RXDMA_PAUSE (1 << 5) +#define CON_TXCH_PAUSE (1 << 4) +#define CON_RXCH_PAUSE (1 << 3) +#define CON_TXDMA_ACTIVE (1 << 2) +#define CON_RXDMA_ACTIVE (1 << 1) +#define CON_ACTIVE (1 << 0) + +#define MOD_OPCLK_CDCLK_OUT (0 << 30) +#define MOD_OPCLK_CDCLK_IN (1 << 30) +#define MOD_OPCLK_BCLK_OUT (2 << 30) +#define MOD_OPCLK_PCLK (3 << 30) +#define MOD_OPCLK_MASK (3 << 30) +#define MOD_TXS_IDMA (1 << 28) /* Sec_TXFIFO use I-DMA */ + +#define MOD_BLCS_SHIFT 26 +#define MOD_BLCS_16BIT (0 << MOD_BLCS_SHIFT) +#define MOD_BLCS_8BIT (1 << MOD_BLCS_SHIFT) +#define MOD_BLCS_24BIT (2 << MOD_BLCS_SHIFT) +#define MOD_BLCS_MASK (3 << MOD_BLCS_SHIFT) +#define MOD_BLCP_SHIFT 24 +#define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) +#define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) +#define MOD_BLCP_24BIT (2 << MOD_BLCP_SHIFT) +#define MOD_BLCP_MASK (3 << MOD_BLCP_SHIFT) + +#define MOD_C2DD_HHALF (1 << 21) /* Discard Higher-half */ +#define MOD_C2DD_LHALF (1 << 20) /* Discard Lower-half */ +#define MOD_C1DD_HHALF (1 << 19) +#define MOD_C1DD_LHALF (1 << 18) +#define MOD_DC2_EN (1 << 17) +#define MOD_DC1_EN (1 << 16) +#define MOD_BLC_16BIT (0 << 13) +#define MOD_BLC_8BIT (1 << 13) +#define MOD_BLC_24BIT (2 << 13) +#define MOD_BLC_MASK (3 << 13) + +#define MOD_IMS_SYSMUX (1 << 10) +#define MOD_SLAVE (1 << 11) +#define MOD_TXONLY (0 << 8) +#define MOD_RXONLY (1 << 8) +#define MOD_TXRX (2 << 8) +#define MOD_MASK (3 << 8) +#define MOD_LR_LLOW (0 << 7) +#define MOD_LR_RLOW (1 << 7) +#define MOD_SDF_IIS (0 << 5) +#define MOD_SDF_MSB (1 << 5) +#define MOD_SDF_LSB (2 << 5) +#define MOD_SDF_MASK (3 << 5) +#define MOD_RCLK_256FS (0 << 3) +#define MOD_RCLK_512FS (1 << 3) +#define MOD_RCLK_384FS (2 << 3) +#define MOD_RCLK_768FS (3 << 3) +#define MOD_RCLK_MASK (3 << 3) +#define MOD_BCLK_32FS (0 << 1) +#define MOD_BCLK_48FS (1 << 1) +#define MOD_BCLK_16FS (2 << 1) +#define MOD_BCLK_24FS (3 << 1) +#define MOD_BCLK_MASK (3 << 1) +#define MOD_8BIT (1 << 0) + +#define MOD_CDCLKCON (1 << 12) + +#define PSR_PSREN (1 << 15) + +#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf) +#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf) + +#define FIC_TXFLUSH (1 << 15) +#define FIC_RXFLUSH (1 << 7) +#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf) +#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f) + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +struct i2s_dai { + /* Platform device for this DAI */ + struct platform_device *pdev; + /* IOREMAP'd SFRs */ + void __iomem *addr; + /* Physical base address of SFRs */ + u32 base; + /* Rate of RCLK source clock */ + unsigned long rclk_srcrate; + /* Frame Clock */ + unsigned frmclk; + /* + * Specifically requested RCLK,BCLK by MACHINE Driver. + * 0 indicates CPU driver is free to choose any value. + */ + unsigned rfs, bfs; + /* I2S Controller's core clock */ + struct clk *clk; + /* Clock for generating I2S signals */ + struct clk *op_clk; + /* Array of clock names for op_clk */ + const char **src_clk; + /* Pointer to the Primary_Fifo if this is Sec_Fifo, NULL otherwise */ + struct i2s_dai *pri_dai; + /* Pointer to the Secondary_Fifo if it has one, NULL otherwise */ + struct i2s_dai *sec_dai; +#define DAI_OPENED (1 << 0) /* Dai is opened */ +#define DAI_MANAGER (1 << 1) /* Dai is the manager */ + unsigned mode; + /* Driver for this DAI */ + struct snd_soc_dai_driver s3c_i2s_drv; + /* DMA parameters */ + struct s3c_dma_params dma_playback; + struct s3c_dma_params dma_capture; + u32 quirks; + u32 suspend_i2smod; + u32 suspend_i2scon; + u32 suspend_i2spsr; +}; + +/* Lock for cross i/f checks */ +static DEFINE_SPINLOCK(lock); + +/* If this is the 'overlay' stereo DAI */ +static inline bool is_secondary(struct i2s_dai *i2s) +{ + return i2s->pri_dai ? true : false; +} + +/* If operating in SoC-Slave mode */ +static inline bool is_slave(struct i2s_dai *i2s) +{ + return (readl(i2s->addr + I2SMOD) & MOD_SLAVE) ? true : false; +} + +/* If this interface of the controller is transmitting data */ +static inline bool tx_active(struct i2s_dai *i2s) +{ + u32 active; + + if (!i2s) + return false; + + active = readl(i2s->addr + I2SMOD); + + if (is_secondary(i2s)) + active &= CON_TXSDMA_ACTIVE; + else + active &= CON_TXDMA_ACTIVE; + + return active ? true : false; +} + +/* If the other interface of the controller is transmitting data */ +static inline bool other_tx_active(struct i2s_dai *i2s) +{ + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + + return tx_active(other); +} + +/* If any interface of the controller is transmitting data */ +static inline bool any_tx_active(struct i2s_dai *i2s) +{ + return tx_active(i2s) || other_tx_active(i2s); +} + +/* If this interface of the controller is receiving data */ +static inline bool rx_active(struct i2s_dai *i2s) +{ + u32 active; + + if (!i2s) + return false; + + active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE; + + return active ? true : false; +} + +/* If the other interface of the controller is receiving data */ +static inline bool other_rx_active(struct i2s_dai *i2s) +{ + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + + return rx_active(other); +} + +/* If any interface of the controller is receiving data */ +static inline bool any_rx_active(struct i2s_dai *i2s) +{ + return rx_active(i2s) || other_rx_active(i2s); +} + +/* If the other DAI is transmitting or receiving data */ +static inline bool other_active(struct i2s_dai *i2s) +{ + return other_rx_active(i2s) || other_tx_active(i2s); +} + +/* If this DAI is transmitting or receiving data */ +static inline bool this_active(struct i2s_dai *i2s) +{ + return tx_active(i2s) || rx_active(i2s); +} + +/* If the controller is active anyway */ +static inline bool any_active(struct i2s_dai *i2s) +{ + return this_active(i2s) || other_active(i2s); +} + +static inline struct i2s_dai *to_info(struct snd_soc_dai *dai) +{ + return snd_soc_dai_get_drvdata(dai); +} + +static inline bool is_opened(struct i2s_dai *i2s) +{ + if (i2s && (i2s->mode & DAI_OPENED)) + return true; + else + return false; +} + +static inline bool is_manager(struct i2s_dai *i2s) +{ + if (is_opened(i2s) && (i2s->mode & DAI_MANAGER)) + return true; + else + return false; +} + +/* Read RCLK of I2S (in multiples of LRCLK) */ +static inline unsigned get_rfs(struct i2s_dai *i2s) +{ + u32 rfs = (readl(i2s->addr + I2SMOD) >> 3) & 0x3; + + switch (rfs) { + case 3: return 768; + case 2: return 384; + case 1: return 512; + default: return 256; + } +} + +/* Write RCLK of I2S (in multiples of LRCLK) */ +static inline void set_rfs(struct i2s_dai *i2s, unsigned rfs) +{ + u32 mod = readl(i2s->addr + I2SMOD); + + mod &= ~MOD_RCLK_MASK; + + switch (rfs) { + case 768: + mod |= MOD_RCLK_768FS; + break; + case 512: + mod |= MOD_RCLK_512FS; + break; + case 384: + mod |= MOD_RCLK_384FS; + break; + default: + mod |= MOD_RCLK_256FS; + break; + } + + writel(mod, i2s->addr + I2SMOD); +} + +/* Read Bit-Clock of I2S (in multiples of LRCLK) */ +static inline unsigned get_bfs(struct i2s_dai *i2s) +{ + u32 bfs = (readl(i2s->addr + I2SMOD) >> 1) & 0x3; + + switch (bfs) { + case 3: return 24; + case 2: return 16; + case 1: return 48; + default: return 32; + } +} + +/* Write Bit-Clock of I2S (in multiples of LRCLK) */ +static inline void set_bfs(struct i2s_dai *i2s, unsigned bfs) +{ + u32 mod = readl(i2s->addr + I2SMOD); + + mod &= ~MOD_BCLK_MASK; + + switch (bfs) { + case 48: + mod |= MOD_BCLK_48FS; + break; + case 32: + mod |= MOD_BCLK_32FS; + break; + case 24: + mod |= MOD_BCLK_24FS; + break; + default: + mod |= MOD_BCLK_16FS; + break; + } + + writel(mod, i2s->addr + I2SMOD); +} + +/* Sample-Size */ +static inline int get_blc(struct i2s_dai *i2s) +{ + int blc = readl(i2s->addr + I2SMOD); + + blc = (blc >> 13) & 0x3; + + switch (blc) { + case 2: return 24; + case 1: return 8; + default: return 16; + } +} + +/* TX Channel Control */ +static void s3c_i2sv2_txctrl(struct i2s_dai *i2s, int on) +{ + void __iomem *addr = i2s->addr; + u32 con = readl(addr + I2SCON); + u32 mod = readl(addr + I2SMOD) & ~MOD_MASK; + + if (on) { + con |= CON_ACTIVE; + con &= ~CON_TXCH_PAUSE; + + if (is_secondary(i2s)) { + con |= CON_TXSDMA_ACTIVE; + con &= ~CON_TXSDMA_PAUSE; + } else { + con |= CON_TXDMA_ACTIVE; + con &= ~CON_TXDMA_PAUSE; + } + + if (any_rx_active(i2s)) + mod |= MOD_TXRX; + else + mod |= MOD_TXONLY; + } else { + if (is_secondary(i2s)) { + con |= CON_TXSDMA_PAUSE; + con &= ~CON_TXSDMA_ACTIVE; + } else { + con |= CON_TXDMA_PAUSE; + con &= ~CON_TXDMA_ACTIVE; + } + + if (other_tx_active(i2s)) { + writel(con, addr + I2SCON); + return; + } + + con |= CON_TXCH_PAUSE; + + if (any_rx_active(i2s)) + mod |= MOD_RXONLY; + else + con &= ~CON_ACTIVE; + } + + writel(mod, addr + I2SMOD); + writel(con, addr + I2SCON); +} + +/* RX Channel Control */ +static void s3c_i2sv2_rxctrl(struct i2s_dai *i2s, int on) +{ + void __iomem *addr = i2s->addr; + u32 con = readl(addr + I2SCON); + u32 mod = readl(addr + I2SMOD) & ~MOD_MASK; + + if (on) { + con |= CON_RXDMA_ACTIVE | CON_ACTIVE; + con &= ~(CON_RXDMA_PAUSE | CON_RXCH_PAUSE); + + if (any_tx_active(i2s)) + mod |= MOD_TXRX; + else + mod |= MOD_RXONLY; + } else { + con |= CON_RXDMA_PAUSE | CON_RXCH_PAUSE; + con &= ~CON_RXDMA_ACTIVE; + + if (any_tx_active(i2s)) + mod |= MOD_TXONLY; + else + con &= ~CON_ACTIVE; + } + + writel(mod, addr + I2SMOD); + writel(con, addr + I2SCON); +} + +/* Flush FIFO of an interface */ +static inline void s3c_i2sv2_fifo(struct i2s_dai *i2s, u32 flush) +{ + void __iomem *fic; + u32 val; + + if (!i2s) + return; + + if (is_secondary(i2s)) + fic = i2s->addr + I2SFICS; + else + fic = i2s->addr + I2SFIC; + + /* Flush the FIFO */ + writel(readl(fic) | flush, fic); + + /* Be patient */ + val = msecs_to_loops(1) / 1000; /* 1 usec */ + while (--val) + cpu_relax(); + + writel(readl(fic) & ~flush, fic); +} + +static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int rfs, int dir) +{ + struct i2s_dai *i2s = to_info(dai); + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + u32 mod = readl(i2s->addr + I2SMOD); + + switch (clk_id) { + case SAMSUNG_I2S_CDCLK: + /* Shouldn't matter in GATING(CLOCK_IN) mode */ + if (dir == SND_SOC_CLOCK_IN) + rfs = 0; + + if ((rfs && other->rfs && (other->rfs != rfs)) || + (any_active(i2s) && + (((dir == SND_SOC_CLOCK_IN) + && !(mod & MOD_CDCLKCON)) || + ((dir == SND_SOC_CLOCK_OUT) + && (mod & MOD_CDCLKCON))))) { + dev_err(&i2s->pdev->dev, + "%s:%d Other DAI busy\n", __func__, __LINE__); + return -EAGAIN; + } + + if (dir == SND_SOC_CLOCK_IN) + mod |= MOD_CDCLKCON; + else + mod &= ~MOD_CDCLKCON; + + i2s->rfs = rfs; + break; + + case SAMSUNG_I2S_RCLKSRC_0: /* clock corrsponding to IISMOD[10] := 0 */ + case SAMSUNG_I2S_RCLKSRC_1: /* clock corrsponding to IISMOD[10] := 1 */ + if ((i2s->quirks & QUIRK_NO_MUXPSR) + || (clk_id == SAMSUNG_I2S_RCLKSRC_0)) + clk_id = 0; + else + clk_id = 1; + + if (!any_active(i2s)) { + if (i2s->op_clk) { + if ((clk_id && !(mod & MOD_IMS_SYSMUX)) || + (!clk_id && (mod & MOD_IMS_SYSMUX))) { + clk_disable(i2s->op_clk); + clk_put(i2s->op_clk); + } else { + return 0; + } + } + + i2s->op_clk = clk_get(&i2s->pdev->dev, + i2s->src_clk[clk_id]); + clk_enable(i2s->op_clk); + i2s->rclk_srcrate = clk_get_rate(i2s->op_clk); + + /* Over-ride the other's */ + if (other) { + other->op_clk = i2s->op_clk; + other->rclk_srcrate = i2s->rclk_srcrate; + } + } else if ((!clk_id && (mod & MOD_IMS_SYSMUX)) + || (clk_id && !(mod & MOD_IMS_SYSMUX))) { + dev_err(&i2s->pdev->dev, + "%s:%d Other DAI busy\n", __func__, __LINE__); + return -EAGAIN; + } else { + /* Call can't be on the active DAI */ + i2s->op_clk = other->op_clk; + i2s->rclk_srcrate = other->rclk_srcrate; + return 0; + } + + if (clk_id == 0) + mod &= ~MOD_IMS_SYSMUX; + else + mod |= MOD_IMS_SYSMUX; + break; + + default: + dev_err(&i2s->pdev->dev, "We don't serve that!\n"); + return -EINVAL; + } + + writel(mod, i2s->addr + I2SMOD); + + return 0; +} + +static int i2sv2_i2s_set_fmt(struct snd_soc_dai *dai, + unsigned int fmt) +{ + struct i2s_dai *i2s = to_info(dai); + u32 mod = readl(i2s->addr + I2SMOD); + u32 tmp = 0; + + /* Format is priority */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_MSB; + break; + case SND_SOC_DAIFMT_LEFT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_LSB; + break; + case SND_SOC_DAIFMT_I2S: + tmp |= MOD_SDF_IIS; + break; + default: + dev_err(&i2s->pdev->dev, "Format not supported\n"); + return -EINVAL; + } + + /* Allow LRCLK-inverted version of the supported formats */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + if (tmp & MOD_LR_RLOW) + tmp &= ~MOD_LR_RLOW; + else + tmp |= MOD_LR_RLOW; + break; + default: + dev_err(&i2s->pdev->dev, "Polarity not supported\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + tmp |= MOD_SLAVE; + break; + case SND_SOC_DAIFMT_CBS_CFS: + /* Set default source clock in Master mode */ + if (i2s->rclk_srcrate == 0) + s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0, + 0, SND_SOC_CLOCK_IN); + break; + default: + dev_err(&i2s->pdev->dev, "master/slave format not supported\n"); + return -EINVAL; + } + + if (any_active(i2s) && + ((mod & (MOD_SDF_MASK | MOD_LR_RLOW + | MOD_SLAVE)) != tmp)) { + dev_err(&i2s->pdev->dev, + "%s:%d Other DAI busy\n", __func__, __LINE__); + return -EAGAIN; + } + + mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE); + mod |= tmp; + writel(mod, i2s->addr + I2SMOD); + + return 0; +} + +static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = to_info(dai); + u32 mod = readl(i2s->addr + I2SMOD); + + if (!is_secondary(i2s)) + mod &= ~(MOD_DC2_EN | MOD_DC1_EN); + + switch (params_channels(params)) { + case 6: + mod |= MOD_DC2_EN; + case 4: + mod |= MOD_DC1_EN; + break; + case 2: + break; + default: + dev_err(&i2s->pdev->dev, "%d channels not supported\n", + params_channels(params)); + return -EINVAL; + } + + if (is_secondary(i2s)) + mod &= ~MOD_BLCS_MASK; + else + mod &= ~MOD_BLCP_MASK; + + if (is_manager(i2s)) + mod &= ~MOD_BLC_MASK; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + if (is_secondary(i2s)) + mod |= MOD_BLCS_8BIT; + else + mod |= MOD_BLCP_8BIT; + if (is_manager(i2s)) + mod |= MOD_BLC_8BIT; + break; + case SNDRV_PCM_FORMAT_S16_LE: + if (is_secondary(i2s)) + mod |= MOD_BLCS_16BIT; + else + mod |= MOD_BLCP_16BIT; + if (is_manager(i2s)) + mod |= MOD_BLC_16BIT; + break; + case SNDRV_PCM_FORMAT_S24_LE: + if (is_secondary(i2s)) + mod |= MOD_BLCS_24BIT; + else + mod |= MOD_BLCP_24BIT; + if (is_manager(i2s)) + mod |= MOD_BLC_24BIT; + break; + default: + dev_err(&i2s->pdev->dev, "Format(%d) not supported\n", + params_format(params)); + return -EINVAL; + } + writel(mod, i2s->addr + I2SMOD); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + snd_soc_dai_set_dma_data(dai, substream, + (void *)&i2s->dma_playback); + else + snd_soc_dai_set_dma_data(dai, substream, + (void *)&i2s->dma_capture); + + i2s->frmclk = params_rate(params); + + return 0; +} + +/* We set constraints on the substream acc to the version of I2S */ +static int s3c_i2sv2_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = to_info(dai); + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + i2s->mode |= DAI_OPENED; + + if (is_manager(other)) + i2s->mode &= ~DAI_MANAGER; + else + i2s->mode |= DAI_MANAGER; + + /* Enforce set_sysclk in Master mode */ + i2s->rclk_srcrate = 0; + + spin_unlock_irqrestore(&lock, flags); + + return 0; +} + +static void s3c_i2sv2_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = to_info(dai); + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + i2s->mode &= ~DAI_OPENED; + i2s->mode &= ~DAI_MANAGER; + + if (is_opened(other)) + other->mode |= DAI_MANAGER; + + /* Reset any constraint on RFS and BFS */ + i2s->rfs = 0; + i2s->bfs = 0; + + spin_unlock_irqrestore(&lock, flags); + + /* Gate CDCLK by default */ + if (!is_opened(other)) + s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK, + 0, SND_SOC_CLOCK_IN); +} + +static int config_setup(struct i2s_dai *i2s) +{ + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + unsigned rfs, bfs, blc; + u32 psr; + + blc = get_blc(i2s); + + bfs = i2s->bfs; + + if (!bfs && other) + bfs = other->bfs; + + /* Select least possible multiple(2) if no constraint set */ + if (!bfs) + bfs = blc * 2; + + rfs = i2s->rfs; + + if (!rfs && other) + rfs = other->rfs; + + if ((rfs == 256 || rfs == 512) && (blc == 24)) { + dev_err(&i2s->pdev->dev, + "%d-RFS not supported for 24-blc\n", rfs); + return -EINVAL; + } + + if (!rfs) { + if (bfs == 16 || bfs == 32) + rfs = 256; + else + rfs = 384; + } + + /* If already setup and running */ + if (any_active(i2s) && (get_rfs(i2s) != rfs || get_bfs(i2s) != bfs)) { + dev_err(&i2s->pdev->dev, + "%s:%d Other DAI busy\n", __func__, __LINE__); + return -EAGAIN; + } + + /* We don't care about BFS in Slave mode */ + if (is_slave(i2s)) + return 0; + + set_bfs(i2s, bfs); + set_rfs(i2s, rfs); + + if (!(i2s->quirks & QUIRK_NO_MUXPSR)) { + psr = i2s->rclk_srcrate / i2s->frmclk / rfs; + writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR); + dev_dbg(&i2s->pdev->dev, + "RCLK_SRC=%luHz PSR=%u, RCLK=%dfs, BCLK=%dfs\n", + i2s->rclk_srcrate, psr, rfs, bfs); + } + + return 0; +} + +static int i2sv2_i2s_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct i2s_dai *i2s = to_info(rtd->cpu_dai); + unsigned long flags; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + local_irq_save(flags); + + if (capture) + s3c_i2sv2_fifo(i2s, FIC_RXFLUSH); + else + s3c_i2sv2_fifo(i2s, FIC_TXFLUSH); + + if (config_setup(i2s)) { + local_irq_restore(flags); + return -EINVAL; + } + + if (capture) + s3c_i2sv2_rxctrl(i2s, 1); + else + s3c_i2sv2_txctrl(i2s, 1); + + local_irq_restore(flags); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + local_irq_save(flags); + + if (capture) + s3c_i2sv2_rxctrl(i2s, 0); + else + s3c_i2sv2_txctrl(i2s, 0); + + local_irq_restore(flags); + break; + } + + return 0; +} + +static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai, + int div_id, int div) +{ + struct i2s_dai *i2s = to_info(dai); + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + + if (div_id == SAMSUNG_I2S_DIV_BCLK) { + if ((any_active(i2s) && div && (get_bfs(i2s) != div)) + || (other && other->bfs && (other->bfs != div))) { + dev_err(&i2s->pdev->dev, + "%s:%d Other DAI busy\n", __func__, __LINE__); + return -EAGAIN; + } + i2s->bfs = div; + } else { + dev_err(&i2s->pdev->dev, + "Invalid clock divider(%d)\n", div_id); + return -EINVAL; + } + + return 0; +} + +static snd_pcm_sframes_t +i2sv2_i2s_delay(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = to_info(dai); + u32 reg = readl(i2s->addr + I2SFIC); + snd_pcm_sframes_t delay; + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + delay = FIC_RXCOUNT(reg); + else if (is_secondary(i2s)) + delay = FICS_TXCOUNT(readl(i2s->addr + I2SFICS)); + else + delay = FIC_TXCOUNT(reg); + + return delay; +} + +#ifdef CONFIG_PM +static int i2sv2_i2s_suspend(struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = to_info(dai); + + if (dai->active) { + i2s->suspend_i2smod = readl(i2s->addr + I2SMOD); + i2s->suspend_i2scon = readl(i2s->addr + I2SCON); + i2s->suspend_i2spsr = readl(i2s->addr + I2SPSR); + } + + return 0; +} + +static int i2sv2_i2s_resume(struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = to_info(dai); + + if (dai->active) { + writel(i2s->suspend_i2scon, i2s->addr + I2SCON); + writel(i2s->suspend_i2smod, i2s->addr + I2SMOD); + writel(i2s->suspend_i2spsr, i2s->addr + I2SPSR); + } + + return 0; +} +#else +#define i2sv2_i2s_suspend NULL +#define i2sv2_i2s_resume NULL +#endif + +static int samsung_i2s_dai_probe(struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = to_info(dai); + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + + if (other && other->clk) /* If this is probe on secondary */ + goto probe_exit; + + i2s->addr = ioremap(i2s->base, 0x100); + if (i2s->addr == NULL) { + dev_err(&i2s->pdev->dev, "cannot ioremap registers\n"); + return -ENXIO; + } + + i2s->clk = clk_get(&i2s->pdev->dev, "iis"); + if (IS_ERR(i2s->clk)) { + dev_err(&i2s->pdev->dev, "failed to get i2s_clock\n"); + iounmap(i2s->addr); + return -ENOENT; + } + clk_enable(i2s->clk); + + if (other) { + other->addr = i2s->addr; + other->clk = i2s->clk; + } + + if (i2s->quirks & QUIRK_NEED_RSTCLR) + writel(CON_RSTCLR, i2s->addr + I2SCON); + +probe_exit: + /* Reset any constraint on RFS and BFS */ + i2s->rfs = 0; + i2s->bfs = 0; + s3c_i2sv2_txctrl(i2s, 0); + s3c_i2sv2_rxctrl(i2s, 0); + s3c_i2sv2_fifo(i2s, FIC_TXFLUSH); + s3c_i2sv2_fifo(other, FIC_TXFLUSH); + s3c_i2sv2_fifo(i2s, FIC_RXFLUSH); + + /* Gate CDCLK by default */ + if (!is_opened(other)) + s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK, + 0, SND_SOC_CLOCK_IN); + + return 0; +} + +static int samsung_i2s_dai_remove(struct snd_soc_dai *dai) +{ + struct i2s_dai *i2s = snd_soc_dai_get_drvdata(dai); + struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai; + + if (!other || !other->clk) { + + if (i2s->quirks & QUIRK_NEED_RSTCLR) + writel(0, i2s->addr + I2SCON); + + clk_disable(i2s->clk); + clk_put(i2s->clk); + + iounmap(i2s->addr); + } + + i2s->clk = NULL; + + return 0; +} + +static struct snd_soc_dai_ops samsung_i2s_dai_ops = { + .trigger = i2sv2_i2s_trigger, + .hw_params = s3c_i2sv2_hw_params, + .set_fmt = i2sv2_i2s_set_fmt, + .set_clkdiv = i2sv2_i2s_set_clkdiv, + .set_sysclk = s3c_i2sv2_set_sysclk, + .startup = s3c_i2sv2_startup, + .shutdown = s3c_i2sv2_shutdown, + .delay = i2sv2_i2s_delay, +}; + +#define SAMSUNG_I2S_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define SAMSUNG_I2S_FMTS \ + (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE) + +static __devinit +struct i2s_dai *s3c_alloc_dai(struct platform_device *pdev, bool sec) +{ + struct i2s_dai *i2s; + + i2s = kzalloc(sizeof(struct i2s_dai), GFP_KERNEL); + if (i2s == NULL) + return NULL; + + i2s->pdev = pdev; + i2s->pri_dai = NULL; + i2s->sec_dai = NULL; + i2s->s3c_i2s_drv.symmetric_rates = 1; + i2s->s3c_i2s_drv.probe = samsung_i2s_dai_probe; + i2s->s3c_i2s_drv.remove = samsung_i2s_dai_remove; + i2s->s3c_i2s_drv.ops = &samsung_i2s_dai_ops; + i2s->s3c_i2s_drv.suspend = i2sv2_i2s_suspend; + i2s->s3c_i2s_drv.resume = i2sv2_i2s_resume; + i2s->s3c_i2s_drv.playback.channels_min = 2; + i2s->s3c_i2s_drv.playback.channels_max = 2; + i2s->s3c_i2s_drv.playback.rates = SAMSUNG_I2S_RATES; + i2s->s3c_i2s_drv.playback.formats = SAMSUNG_I2S_FMTS; + + if (!sec) { + i2s->s3c_i2s_drv.capture.channels_min = 2; + i2s->s3c_i2s_drv.capture.channels_max = 2; + i2s->s3c_i2s_drv.capture.rates = SAMSUNG_I2S_RATES; + i2s->s3c_i2s_drv.capture.formats = SAMSUNG_I2S_FMTS; + } else { /* Create a new platform_device for Secondary */ + i2s->pdev = platform_device_register_resndata(NULL, + pdev->name, pdev->id + MAX_I2S, + NULL, 0, NULL, 0); + if (IS_ERR(i2s->pdev)) { + kfree(i2s); + return NULL; + } + } + + /* Pre-assign snd_soc_dai_set_drvdata */ + dev_set_drvdata(&i2s->pdev->dev, i2s); + + return i2s; +} + +static __devinit int samsung_i2s_probe(struct platform_device *pdev) +{ + u32 dma_pl_chan, dma_cp_chan, dma_pl_sec_chan; + struct i2s_dai *pri_dai, *sec_dai = NULL; + struct s3c_audio_pdata *i2s_pdata; + struct samsung_i2s *i2s_cfg; + struct resource *res; + u32 regs_base, quirks; + int ret = 0; + + /* Call during Seconday interface registration */ + if (pdev->id >= MAX_I2S) { + sec_dai = dev_get_drvdata(&pdev->dev); + snd_soc_register_dai(&sec_dai->pdev->dev, + &sec_dai->s3c_i2s_drv); + return 0; + } + + i2s_pdata = pdev->dev.platform_data; + if (i2s_pdata == NULL) { + dev_err(&pdev->dev, "Can't work without s3c_audio_pdata\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!res) { + dev_err(&pdev->dev, "Unable to get I2S-TX dma resource\n"); + return -ENXIO; + } + dma_pl_chan = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!res) { + dev_err(&pdev->dev, "Unable to get I2S-RX dma resource\n"); + return -ENXIO; + } + dma_cp_chan = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 2); + if (res) + dma_pl_sec_chan = res->start; + else + dma_pl_sec_chan = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Unable to get I2S SFR address\n"); + return -ENXIO; + } + + if (!request_mem_region(res->start, resource_size(res), + "samsung-i2s")) { + dev_err(&pdev->dev, "Unable to request SFR region\n"); + return -EBUSY; + } + regs_base = res->start; + + i2s_cfg = &i2s_pdata->type.i2s; + quirks = i2s_cfg->quirks; + + pri_dai = s3c_alloc_dai(pdev, false); + if (!pri_dai) { + dev_err(&pdev->dev, "Unable to alloc I2S_pri\n"); + ret = -ENOMEM; + goto err1; + } + + pri_dai->dma_playback.dma_addr = regs_base + I2STXD; + pri_dai->dma_capture.dma_addr = regs_base + I2SRXD; + pri_dai->dma_playback.client = + (struct s3c2410_dma_client *)&pri_dai->dma_playback; + pri_dai->dma_capture.client = + (struct s3c2410_dma_client *)&pri_dai->dma_capture; + pri_dai->dma_playback.channel = dma_pl_chan; + pri_dai->dma_capture.channel = dma_cp_chan; + pri_dai->src_clk = i2s_cfg->src_clk; + pri_dai->dma_playback.dma_size = 4; + pri_dai->dma_capture.dma_size = 4; + pri_dai->base = regs_base; + pri_dai->quirks = quirks; + + if (quirks & QUIRK_PRI_6CHAN) + pri_dai->s3c_i2s_drv.playback.channels_max = 6; + + if (quirks & QUIRK_SEC_DAI) { + sec_dai = s3c_alloc_dai(pdev, true); + if (!sec_dai) { + dev_err(&pdev->dev, "Unable to alloc I2S_sec\n"); + ret = -ENOMEM; + goto err2; + } + sec_dai->dma_playback.dma_addr = regs_base + I2STXDS; + sec_dai->dma_playback.client = + (struct s3c2410_dma_client *)&sec_dai->dma_playback; + /* Use iDMA always if SysDMA not provided */ + sec_dai->dma_playback.channel = dma_pl_sec_chan ? : -1; + sec_dai->src_clk = i2s_cfg->src_clk; + sec_dai->dma_playback.dma_size = 4; + sec_dai->base = regs_base; + sec_dai->quirks = quirks; + sec_dai->pri_dai = pri_dai; + pri_dai->sec_dai = sec_dai; + } + + if (i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to configure gpio\n"); + ret = -EINVAL; + goto err3; + } + + snd_soc_register_dai(&pri_dai->pdev->dev, &pri_dai->s3c_i2s_drv); + + return 0; +err3: + kfree(sec_dai); +err2: + kfree(pri_dai); +err1: + release_mem_region(regs_base, resource_size(res)); + + return ret; +} + +static __devexit int samsung_i2s_remove(struct platform_device *pdev) +{ + struct i2s_dai *i2s, *other; + + i2s = dev_get_drvdata(&pdev->dev); + other = i2s->pri_dai ? : i2s->sec_dai; + + if (other) { + other->pri_dai = NULL; + other->sec_dai = NULL; + } else { + struct resource *res; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, resource_size(res)); + } + + i2s->pri_dai = NULL; + i2s->sec_dai = NULL; + + kfree(i2s); + + snd_soc_unregister_dai(&pdev->dev); + + return 0; +} + +static struct platform_driver samsung_i2s_driver = { + .probe = samsung_i2s_probe, + .remove = samsung_i2s_remove, + .driver = { + .name = "samsung-i2s", + .owner = THIS_MODULE, + }, +}; + +static int __init samsung_i2s_init(void) +{ + return platform_driver_register(&samsung_i2s_driver); +} +module_init(samsung_i2s_init); + +static void __exit samsung_i2s_exit(void) +{ + platform_driver_unregister(&samsung_i2s_driver); +} +module_exit(samsung_i2s_exit); + +/* Module information */ +MODULE_AUTHOR("Jaswinder Singh, <jassi.brar(a)samsung.com>"); +MODULE_DESCRIPTION("Samsung I2S Interface"); +MODULE_ALIAS("platform:samsung-i2s"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/i2s.h b/sound/soc/samsung/i2s.h new file mode 100644 index 0000000..73a71cd --- /dev/null +++ b/sound/soc/samsung/i2s.h @@ -0,0 +1,29 @@ +/* sound/soc/samsung/i2s.h + * + * ALSA SoC Audio Layer - Samsung I2S Controller driver + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar(a)samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SND_SOC_SAMSUNG_I2S_H +#define __SND_SOC_SAMSUNG_I2S_H + +/* + * Maximum number of I2S blocks that any SoC can have. + * The secondary interface of a CPU dai(if there exists any), + * is indexed at [cpu-dai's ID + MAX_I2S] + */ +#define MAX_I2S 4 + +#define SAMSUNG_I2S_DIV_BCLK 1 + +#define SAMSUNG_I2S_RCLKSRC_0 0 +#define SAMSUNG_I2S_RCLKSRC_1 1 +#define SAMSUNG_I2S_CDCLK 2 + +#endif /* __SND_SOC_SAMSUNG_I2S_H */ diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c new file mode 100644 index 0000000..fe1649e --- /dev/null +++ b/sound/soc/samsung/jive_wm8750.c @@ -0,0 +1,191 @@ +/* sound/soc/samsung/jive_wm8750.c + * + * Copyright 2007,2008 Simtec Electronics + * + * Based on sound/soc/pxa/spitz.c + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> + +#include "dma.h" +#include "s3c2412-i2s.h" + +#include "../codecs/wm8750.h" + +static const struct snd_soc_dapm_route audio_map[] = { + { "Headphone Jack", NULL, "LOUT1" }, + { "Headphone Jack", NULL, "ROUT1" }, + { "Internal Speaker", NULL, "LOUT2" }, + { "Internal Speaker", NULL, "ROUT2" }, + { "LINPUT1", NULL, "Line Input" }, + { "RINPUT1", NULL, "Line Input" }, +}; + +static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Internal Speaker", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), +}; + +static int jive_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct s3c_i2sv2_rate_calc div; + unsigned int clk = 0; + int ret = 0; + + switch (params_rate(params)) { + case 8000: + case 16000: + case 48000: + case 96000: + clk = 12288000; + break; + case 11025: + case 22050: + case 44100: + clk = 11289600; + break; + } + + s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params), + s3c_i2sv2_get_clock(cpu_dai)); + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_RCLK, div.fs_div); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_PRESCALER, + div.clk_div - 1); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops jive_ops = { + .hw_params = jive_hw_params, +}; + +static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int err; + + /* These endpoints are not being used. */ + snd_soc_dapm_nc_pin(codec, "LINPUT2"); + snd_soc_dapm_nc_pin(codec, "RINPUT2"); + snd_soc_dapm_nc_pin(codec, "LINPUT3"); + snd_soc_dapm_nc_pin(codec, "RINPUT3"); + snd_soc_dapm_nc_pin(codec, "OUT3"); + snd_soc_dapm_nc_pin(codec, "MONO"); + + /* Add jive specific widgets */ + err = snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets, + ARRAY_SIZE(wm8750_dapm_widgets)); + if (err) { + printk(KERN_ERR "%s: failed to add widgets (%d)\n", + __func__, err); + return err; + } + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link jive_dai = { + .name = "wm8750", + .stream_name = "WM8750", + .cpu_dai_name = "s3c2412-i2s", + .codec_dai_name = "wm8750-hifi", + .platform_name = "samsung-audio", + .codec_name = "wm8750-codec.0-0x1a", + .init = jive_wm8750_init, + .ops = &jive_ops, +}; + +/* jive audio machine driver */ +static struct snd_soc_card snd_soc_machine_jive = { + .name = "Jive", + .dai_link = &jive_dai, + .num_links = 1, +}; + +static struct platform_device *jive_snd_device; + +static int __init jive_init(void) +{ + int ret; + + if (!machine_is_jive()) + return 0; + + printk("JIVE WM8750 Audio support\n"); + + jive_snd_device = platform_device_alloc("soc-audio", -1); + if (!jive_snd_device) + return -ENOMEM; + + platform_set_drvdata(jive_snd_device, &snd_soc_machine_jive); + ret = platform_device_add(jive_snd_device); + + if (ret) + platform_device_put(jive_snd_device); + + return ret; +} + +static void __exit jive_exit(void) +{ + platform_device_unregister(jive_snd_device); +} + +module_init(jive_init); +module_exit(jive_exit); + +MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); +MODULE_DESCRIPTION("ALSA SoC Jive Audio support"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/lm4857.h b/sound/soc/samsung/lm4857.h new file mode 100644 index 0000000..0cf5b70 --- /dev/null +++ b/sound/soc/samsung/lm4857.h @@ -0,0 +1,32 @@ +/* + * lm4857.h -- ALSA Soc Audio Layer + * + * Copyright 2007 Wolfson Microelectronics PLC. + * Author: Graeme Gregory + * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Revision history + * 18th Jun 2007 Initial version. + */ + +#ifndef LM4857_H_ +#define LM4857_H_ + +/* The register offsets in the cache array */ +#define LM4857_MVOL 0 +#define LM4857_LVOL 1 +#define LM4857_RVOL 2 +#define LM4857_CTRL 3 + +/* the shifts required to set these bits */ +#define LM4857_3D 5 +#define LM4857_WAKEUP 5 +#define LM4857_EPGAIN 4 + +#endif /*LM4857_H_*/ + diff --git a/sound/soc/samsung/ln2440sbc_alc650.c b/sound/soc/samsung/ln2440sbc_alc650.c new file mode 100644 index 0000000..e507174 --- /dev/null +++ b/sound/soc/samsung/ln2440sbc_alc650.c @@ -0,0 +1,78 @@ +/* + * SoC audio for ln2440sbc + * + * Copyright 2007 KonekTel, a.s. + * Author: Ivan Kuten + * ivan.kuten(a)promwad.com + * + * Heavily based on smdk2443_wm9710.c + * Copyright 2007 Wolfson Microelectronics PLC. + * Author: Graeme Gregory + * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "dma.h" +#include "ac97.h" + +static struct snd_soc_card ln2440sbc; + +static struct snd_soc_dai_link ln2440sbc_dai[] = { +{ + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai_name = "samsung-ac97", + .codec_dai_name = "ac97-hifi", + .codec_name = "ac97-codec", + .platform_name = "samsung-audio", +}, +}; + +static struct snd_soc_card ln2440sbc = { + .name = "LN2440SBC", + .dai_link = ln2440sbc_dai, + .num_links = ARRAY_SIZE(ln2440sbc_dai), +}; + +static struct platform_device *ln2440sbc_snd_ac97_device; + +static int __init ln2440sbc_init(void) +{ + int ret; + + ln2440sbc_snd_ac97_device = platform_device_alloc("soc-audio", -1); + if (!ln2440sbc_snd_ac97_device) + return -ENOMEM; + + platform_set_drvdata(ln2440sbc_snd_ac97_device, &ln2440sbc); + ret = platform_device_add(ln2440sbc_snd_ac97_device); + + if (ret) + platform_device_put(ln2440sbc_snd_ac97_device); + + return ret; +} + +static void __exit ln2440sbc_exit(void) +{ + platform_device_unregister(ln2440sbc_snd_ac97_device); +} + +module_init(ln2440sbc_init); +module_exit(ln2440sbc_exit); + +/* Module information */ +MODULE_AUTHOR("Ivan Kuten"); +MODULE_DESCRIPTION("ALSA SoC ALC650 LN2440SBC"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c new file mode 100644 index 0000000..c4b2013 --- /dev/null +++ b/sound/soc/samsung/neo1973_gta02_wm8753.c @@ -0,0 +1,504 @@ +/* + * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02) + * + * Copyright 2007 Openmoko Inc + * Author: Graeme Gregory <graeme(a)openmoko.org> + * Copyright 2007 Wolfson Microelectronics PLC. + * Author: Graeme Gregory <linux(a)wolfsonmicro.com> + * Copyright 2009 Wolfson Microelectronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> + +#include <plat/regs-iis.h> + +#include <mach/regs-clock.h> +#include <asm/io.h> +#include <mach/gta02.h> +#include "../codecs/wm8753.h" +#include "dma.h" +#include "s3c24xx-i2s.h" + +static struct snd_soc_card neo1973_gta02; + +static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + unsigned int pll_out = 0, bclk = 0; + int ret = 0; + unsigned long iis_clkrate; + + iis_clkrate = s3c24xx_i2s_get_clockrate(); + + switch (params_rate(params)) { + case 8000: + case 16000: + pll_out = 12288000; + break; + case 48000: + bclk = WM8753_BCLK_DIV_4; + pll_out = 12288000; + break; + case 96000: + bclk = WM8753_BCLK_DIV_2; + pll_out = 12288000; + break; + case 11025: + bclk = WM8753_BCLK_DIV_16; + pll_out = 11289600; + break; + case 22050: + bclk = WM8753_BCLK_DIV_8; + pll_out = 11289600; + break; + case 44100: + bclk = WM8753_BCLK_DIV_4; + pll_out = 11289600; + break; + case 88200: + bclk = WM8753_BCLK_DIV_2; + pll_out = 11289600; + break; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* set MCLK division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, + S3C2410_IISMOD_32FS); + if (ret < 0) + return ret; + + /* set codec BCLK division for sample rate */ + ret = snd_soc_dai_set_clkdiv(codec_dai, + WM8753_BCLKDIV, bclk); + if (ret < 0) + return ret; + + /* set prescaler division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + S3C24XX_PRESCALE(4, 4)); + if (ret < 0) + return ret; + + /* codec PLL input is PCLK/4 */ + ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, + iis_clkrate / 4, pll_out); + if (ret < 0) + return ret; + + return 0; +} + +static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + + /* disable the PLL */ + return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0); +} + +/* + * Neo1973 WM8753 HiFi DAI opserations. + */ +static struct snd_soc_ops neo1973_gta02_hifi_ops = { + .hw_params = neo1973_gta02_hifi_hw_params, + .hw_free = neo1973_gta02_hifi_hw_free, +}; + +static int neo1973_gta02_voice_hw_params( + struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + unsigned int pcmdiv = 0; + int ret = 0; + unsigned long iis_clkrate; + + iis_clkrate = s3c24xx_i2s_get_clockrate(); + + if (params_rate(params) != 8000) + return -EINVAL; + if (params_channels(params) != 1) + return -EINVAL; + + pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */ + + /* todo: gg check mode (DSP_B) against CSR datasheet */ + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, + 12288000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* set codec PCM division for sample rate */ + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, + pcmdiv); + if (ret < 0) + return ret; + + /* configue and enable PLL for 12.288MHz output */ + ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, + iis_clkrate / 4, 12288000); + if (ret < 0) + return ret; + + return 0; +} + +static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + + /* disable the PLL */ + return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0); +} + +static struct snd_soc_ops neo1973_gta02_voice_ops = { + .hw_params = neo1973_gta02_voice_hw_params, + .hw_free = neo1973_gta02_voice_hw_free, +}; + +#define LM4853_AMP 1 +#define LM4853_SPK 2 + +static u8 lm4853_state; + +/* This has no effect, it exists only to maintain compatibility with + * existing ALSA state files. + */ +static int lm4853_set_state(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int val = ucontrol->value.integer.value[0]; + + if (val) + lm4853_state |= LM4853_AMP; + else + lm4853_state &= ~LM4853_AMP; + + return 0; +} + +static int lm4853_get_state(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP; + + return 0; +} + +static int lm4853_set_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int val = ucontrol->value.integer.value[0]; + + if (val) { + lm4853_state |= LM4853_SPK; + gpio_set_value(GTA02_GPIO_HP_IN, 0); + } else { + lm4853_state &= ~LM4853_SPK; + gpio_set_value(GTA02_GPIO_HP_IN, 1); + } + + return 0; +} + +static int lm4853_get_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1; + + return 0; +} + +static int lm4853_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, + int event) +{ + gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event)); + + return 0; +} + +static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Stereo Out", lm4853_event), + SND_SOC_DAPM_LINE("GSM Line Out", NULL), + SND_SOC_DAPM_LINE("GSM Line In", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Handset Mic", NULL), + SND_SOC_DAPM_SPK("Handset Spk", NULL), +}; + + +/* example machine audio_mapnections */ +static const struct snd_soc_dapm_route audio_map[] = { + + /* Connections to the lm4853 amp */ + {"Stereo Out", NULL, "LOUT1"}, + {"Stereo Out", NULL, "ROUT1"}, + + /* Connections to the GSM Module */ + {"GSM Line Out", NULL, "MONO1"}, + {"GSM Line Out", NULL, "MONO2"}, + {"RXP", NULL, "GSM Line In"}, + {"RXN", NULL, "GSM Line In"}, + + /* Connections to Headset */ + {"MIC1", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Headset Mic"}, + + /* Call Mic */ + {"MIC2", NULL, "Mic Bias"}, + {"MIC2N", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Handset Mic"}, + + /* Call Speaker */ + {"Handset Spk", NULL, "LOUT2"}, + {"Handset Spk", NULL, "ROUT2"}, + + /* Connect the ALC pins */ + {"ACIN", NULL, "ACOP"}, +}; + +static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = { + SOC_DAPM_PIN_SWITCH("Stereo Out"), + SOC_DAPM_PIN_SWITCH("GSM Line Out"), + SOC_DAPM_PIN_SWITCH("GSM Line In"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Handset Mic"), + SOC_DAPM_PIN_SWITCH("Handset Spk"), + + /* This has no effect, it exists only to maintain compatibility with + * existing ALSA state files. + */ + SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0, + lm4853_get_state, + lm4853_set_state), + SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0, + lm4853_get_spk, + lm4853_set_spk), +}; + +/* + * This is an example machine initialisation for a wm8753 connected to a + * neo1973 GTA02. + */ +static int neo1973_gta02_wm8753_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int err; + + /* set up NC codec pins */ + snd_soc_dapm_nc_pin(codec, "OUT3"); + snd_soc_dapm_nc_pin(codec, "OUT4"); + snd_soc_dapm_nc_pin(codec, "LINE1"); + snd_soc_dapm_nc_pin(codec, "LINE2"); + + /* Add neo1973 gta02 specific widgets */ + snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets, + ARRAY_SIZE(wm8753_dapm_widgets)); + + /* add neo1973 gta02 specific controls */ + err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls, + ARRAY_SIZE(wm8753_neo1973_gta02_controls)); + + if (err < 0) + return err; + + /* set up neo1973 gta02 specific audio path audio_map */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* set endpoints to default off mode */ + snd_soc_dapm_disable_pin(codec, "Stereo Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Handset Mic"); + snd_soc_dapm_disable_pin(codec, "Handset Spk"); + + /* allow audio paths from the GSM modem to run during suspend */ + snd_soc_dapm_ignore_suspend(codec, "Stereo Out"); + snd_soc_dapm_ignore_suspend(codec, "GSM Line Out"); + snd_soc_dapm_ignore_suspend(codec, "GSM Line In"); + snd_soc_dapm_ignore_suspend(codec, "Headset Mic"); + snd_soc_dapm_ignore_suspend(codec, "Handset Mic"); + snd_soc_dapm_ignore_suspend(codec, "Handset Spk"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +/* + * BT Codec DAI + */ +static struct snd_soc_dai_driver bt_dai = { + .name = "bluetooth-dai", + .playback = { + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, +}; + +static struct snd_soc_dai_link neo1973_gta02_dai[] = { +{ /* Hifi Playback - for similatious use with voice below */ + .name = "WM8753", + .stream_name = "WM8753 HiFi", + .cpu_dai_name = "s3c24xx-i2s", + .codec_dai_name = "wm8753-hifi", + .init = neo1973_gta02_wm8753_init, + .platform_name = "samsung-audio", + .codec_name = "wm8753-codec.0-0x1a", + .ops = &neo1973_gta02_hifi_ops, +}, +{ /* Voice via BT */ + .name = "Bluetooth", + .stream_name = "Voice", + .cpu_dai_name = "bluetooth-dai", + .codec_dai_name = "wm8753-voice", + .ops = &neo1973_gta02_voice_ops, + .codec_name = "wm8753-codec.0-0x1a", + .platform_name = "samsung-audio", +}, +}; + +static struct snd_soc_card neo1973_gta02 = { + .name = "neo1973-gta02", + .dai_link = neo1973_gta02_dai, + .num_links = ARRAY_SIZE(neo1973_gta02_dai), +}; + +static struct platform_device *neo1973_gta02_snd_device; + +static int __init neo1973_gta02_init(void) +{ + int ret; + + if (!machine_is_neo1973_gta02()) { + printk(KERN_INFO + "Only GTA02 is supported by this ASoC driver\n"); + return -ENODEV; + } + + neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1); + if (!neo1973_gta02_snd_device) + return -ENOMEM; + + /* register bluetooth DAI here */ + ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, -1, &bt_dai); + if (ret) { + platform_device_put(neo1973_gta02_snd_device); + return ret; + } + + platform_set_drvdata(neo1973_gta02_snd_device, &neo1973_gta02); + ret = platform_device_add(neo1973_gta02_snd_device); + + if (ret) { + platform_device_put(neo1973_gta02_snd_device); + return ret; + } + + /* Initialise GPIOs used by amp */ + ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN"); + if (ret) { + pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN); + goto err_unregister_device; + } + + ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1); + if (ret) { + pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN); + goto err_free_gpio_hp_in; + } + + ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT"); + if (ret) { + pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT); + goto err_free_gpio_hp_in; + } + + ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1); + if (ret) { + pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT); + goto err_free_gpio_amp_shut; + } + + return 0; + +err_free_gpio_amp_shut: + gpio_free(GTA02_GPIO_AMP_SHUT); +err_free_gpio_hp_in: + gpio_free(GTA02_GPIO_HP_IN); +err_unregister_device: + platform_device_unregister(neo1973_gta02_snd_device); + return ret; +} +module_init(neo1973_gta02_init); + +static void __exit neo1973_gta02_exit(void) +{ + snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev, -1); + platform_device_unregister(neo1973_gta02_snd_device); + gpio_free(GTA02_GPIO_HP_IN); + gpio_free(GTA02_GPIO_AMP_SHUT); +} +module_exit(neo1973_gta02_exit); + +/* Module information */ +MODULE_AUTHOR("Graeme Gregory, graeme(a)openmoko.org"); +MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c new file mode 100644 index 0000000..96dda57 --- /dev/null +++ b/sound/soc/samsung/neo1973_wm8753.c @@ -0,0 +1,704 @@ +/* + * neo1973_wm8753.c -- SoC audio for Neo1973 + * + * Copyright 2007 Wolfson Microelectronics PLC. + * Author: Graeme Gregory + * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> + +#include <asm/mach-types.h> +#include <asm/hardware/scoop.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/hardware.h> +#include <linux/io.h> +#include <mach/spi-gpio.h> + +#include <plat/regs-iis.h> + +#include "../codecs/wm8753.h" +#include "lm4857.h" +#include "dma.h" +#include "s3c24xx-i2s.h" + +/* define the scenarios */ +#define NEO_AUDIO_OFF 0 +#define NEO_GSM_CALL_AUDIO_HANDSET 1 +#define NEO_GSM_CALL_AUDIO_HEADSET 2 +#define NEO_GSM_CALL_AUDIO_BLUETOOTH 3 +#define NEO_STEREO_TO_SPEAKERS 4 +#define NEO_STEREO_TO_HEADPHONES 5 +#define NEO_CAPTURE_HANDSET 6 +#define NEO_CAPTURE_HEADSET 7 +#define NEO_CAPTURE_BLUETOOTH 8 + +static struct snd_soc_card neo1973; +static struct i2c_client *i2c; + +static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + unsigned int pll_out = 0, bclk = 0; + int ret = 0; + unsigned long iis_clkrate; + + pr_debug("Entered %s\n", __func__); + + iis_clkrate = s3c24xx_i2s_get_clockrate(); + + switch (params_rate(params)) { + case 8000: + case 16000: + pll_out = 12288000; + break; + case 48000: + bclk = WM8753_BCLK_DIV_4; + pll_out = 12288000; + break; + case 96000: + bclk = WM8753_BCLK_DIV_2; + pll_out = 12288000; + break; + case 11025: + bclk = WM8753_BCLK_DIV_16; + pll_out = 11289600; + break; + case 22050: + bclk = WM8753_BCLK_DIV_8; + pll_out = 11289600; + break; + case 44100: + bclk = WM8753_BCLK_DIV_4; + pll_out = 11289600; + break; + case 88200: + bclk = WM8753_BCLK_DIV_2; + pll_out = 11289600; + break; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* set MCLK division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, + S3C2410_IISMOD_32FS); + if (ret < 0) + return ret; + + /* set codec BCLK division for sample rate */ + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_BCLKDIV, bclk); + if (ret < 0) + return ret; + + /* set prescaler division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + S3C24XX_PRESCALE(4, 4)); + if (ret < 0) + return ret; + + /* codec PLL input is PCLK/4 */ + ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, + iis_clkrate / 4, pll_out); + if (ret < 0) + return ret; + + return 0; +} + +static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + + pr_debug("Entered %s\n", __func__); + + /* disable the PLL */ + return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0); +} + +/* + * Neo1973 WM8753 HiFi DAI opserations. + */ +static struct snd_soc_ops neo1973_hifi_ops = { + .hw_params = neo1973_hifi_hw_params, + .hw_free = neo1973_hifi_hw_free, +}; + +static int neo1973_voice_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + unsigned int pcmdiv = 0; + int ret = 0; + unsigned long iis_clkrate; + + pr_debug("Entered %s\n", __func__); + + iis_clkrate = s3c24xx_i2s_get_clockrate(); + + if (params_rate(params) != 8000) + return -EINVAL; + if (params_channels(params) != 1) + return -EINVAL; + + pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */ + + /* todo: gg check mode (DSP_B) against CSR datasheet */ + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, 12288000, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* set codec PCM division for sample rate */ + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, pcmdiv); + if (ret < 0) + return ret; + + /* configue and enable PLL for 12.288MHz output */ + ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, + iis_clkrate / 4, 12288000); + if (ret < 0) + return ret; + + return 0; +} + +static int neo1973_voice_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + + pr_debug("Entered %s\n", __func__); + + /* disable the PLL */ + return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0); +} + +static struct snd_soc_ops neo1973_voice_ops = { + .hw_params = neo1973_voice_hw_params, + .hw_free = neo1973_voice_hw_free, +}; + +static int neo1973_scenario; + +static int neo1973_get_scenario(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = neo1973_scenario; + return 0; +} + +static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario) +{ + pr_debug("Entered %s\n", __func__); + + switch (neo1973_scenario) { + case NEO_AUDIO_OFF: + snd_soc_dapm_disable_pin(codec, "Audio Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + break; + case NEO_GSM_CALL_AUDIO_HANDSET: + snd_soc_dapm_enable_pin(codec, "Audio Out"); + snd_soc_dapm_enable_pin(codec, "GSM Line Out"); + snd_soc_dapm_enable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_enable_pin(codec, "Call Mic"); + break; + case NEO_GSM_CALL_AUDIO_HEADSET: + snd_soc_dapm_enable_pin(codec, "Audio Out"); + snd_soc_dapm_enable_pin(codec, "GSM Line Out"); + snd_soc_dapm_enable_pin(codec, "GSM Line In"); + snd_soc_dapm_enable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + break; + case NEO_GSM_CALL_AUDIO_BLUETOOTH: + snd_soc_dapm_disable_pin(codec, "Audio Out"); + snd_soc_dapm_enable_pin(codec, "GSM Line Out"); + snd_soc_dapm_enable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + break; + case NEO_STEREO_TO_SPEAKERS: + snd_soc_dapm_enable_pin(codec, "Audio Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + break; + case NEO_STEREO_TO_HEADPHONES: + snd_soc_dapm_enable_pin(codec, "Audio Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + break; + case NEO_CAPTURE_HANDSET: + snd_soc_dapm_disable_pin(codec, "Audio Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_enable_pin(codec, "Call Mic"); + break; + case NEO_CAPTURE_HEADSET: + snd_soc_dapm_disable_pin(codec, "Audio Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_enable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + break; + case NEO_CAPTURE_BLUETOOTH: + snd_soc_dapm_disable_pin(codec, "Audio Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + break; + default: + snd_soc_dapm_disable_pin(codec, "Audio Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line Out"); + snd_soc_dapm_disable_pin(codec, "GSM Line In"); + snd_soc_dapm_disable_pin(codec, "Headset Mic"); + snd_soc_dapm_disable_pin(codec, "Call Mic"); + } + + snd_soc_dapm_sync(codec); + + return 0; +} + +static int neo1973_set_scenario(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + + pr_debug("Entered %s\n", __func__); + + if (neo1973_scenario == ucontrol->value.integer.value[0]) + return 0; + + neo1973_scenario = ucontrol->value.integer.value[0]; + set_scenario_endpoints(codec, neo1973_scenario); + return 1; +} + +static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0}; + +static void lm4857_write_regs(void) +{ + pr_debug("Entered %s\n", __func__); + + if (i2c_master_send(i2c, lm4857_regs, 4) != 4) + printk(KERN_ERR "lm4857: i2c write failed\n"); +} + +static int lm4857_get_reg(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int reg = mc->reg; + int shift = mc->shift; + int mask = mc->max; + + pr_debug("Entered %s\n", __func__); + + ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask; + return 0; +} + +static int lm4857_set_reg(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + int reg = mc->reg; + int shift = mc->shift; + int mask = mc->max; + + if (((lm4857_regs[reg] >> shift) & mask) == + ucontrol->value.integer.value[0]) + return 0; + + lm4857_regs[reg] &= ~(mask << shift); + lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift; + lm4857_write_regs(); + return 1; +} + +static int lm4857_get_mode(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + u8 value = lm4857_regs[LM4857_CTRL] & 0x0F; + + pr_debug("Entered %s\n", __func__); + + if (value) + value -= 5; + + ucontrol->value.integer.value[0] = value; + return 0; +} + +static int lm4857_set_mode(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + u8 value = ucontrol->value.integer.value[0]; + + pr_debug("Entered %s\n", __func__); + + if (value) + value += 5; + + if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value) + return 0; + + lm4857_regs[LM4857_CTRL] &= 0xF0; + lm4857_regs[LM4857_CTRL] |= value; + lm4857_write_regs(); + return 1; +} + +static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = { + SND_SOC_DAPM_LINE("Audio Out", NULL), + SND_SOC_DAPM_LINE("GSM Line Out", NULL), + SND_SOC_DAPM_LINE("GSM Line In", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Call Mic", NULL), +}; + + +static const struct snd_soc_dapm_route dapm_routes[] = { + + /* Connections to the lm4857 amp */ + {"Audio Out", NULL, "LOUT1"}, + {"Audio Out", NULL, "ROUT1"}, + + /* Connections to the GSM Module */ + {"GSM Line Out", NULL, "MONO1"}, + {"GSM Line Out", NULL, "MONO2"}, + {"RXP", NULL, "GSM Line In"}, + {"RXN", NULL, "GSM Line In"}, + + /* Connections to Headset */ + {"MIC1", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Headset Mic"}, + + /* Call Mic */ + {"MIC2", NULL, "Mic Bias"}, + {"MIC2N", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Call Mic"}, + + /* Connect the ALC pins */ + {"ACIN", NULL, "ACOP"}, +}; + +static const char *lm4857_mode[] = { + "Off", + "Call Speaker", + "Stereo Speakers", + "Stereo Speakers + Headphones", + "Headphones" +}; + +static const struct soc_enum lm4857_mode_enum[] = { + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode), +}; + +static const char *neo_scenarios[] = { + "Off", + "GSM Handset", + "GSM Headset", + "GSM Bluetooth", + "Speakers", + "Headphones", + "Capture Handset", + "Capture Headset", + "Capture Bluetooth" +}; + +static const struct soc_enum neo_scenario_enum[] = { + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(neo_scenarios), neo_scenarios), +}; + +static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0); +static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0); + +static const struct snd_kcontrol_new wm8753_neo1973_controls[] = { + SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0, + lm4857_get_reg, lm4857_set_reg, stereo_tlv), + SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0, + lm4857_get_reg, lm4857_set_reg, stereo_tlv), + SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0, + lm4857_get_reg, lm4857_set_reg, mono_tlv), + SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0], + lm4857_get_mode, lm4857_set_mode), + SOC_ENUM_EXT("Neo Mode", neo_scenario_enum[0], + neo1973_get_scenario, neo1973_set_scenario), + SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0, + lm4857_get_reg, lm4857_set_reg), + SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0, + lm4857_get_reg, lm4857_set_reg), + SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0, + lm4857_get_reg, lm4857_set_reg), + SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0, + lm4857_get_reg, lm4857_set_reg), +}; + +/* + * This is an example machine initialisation for a wm8753 connected to a + * neo1973 II. It is missing logic to detect hp/mic insertions and logic + * to re-route the audio in such an event. + */ +static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int err; + + pr_debug("Entered %s\n", __func__); + + /* set up NC codec pins */ + snd_soc_dapm_nc_pin(codec, "LOUT2"); + snd_soc_dapm_nc_pin(codec, "ROUT2"); + snd_soc_dapm_nc_pin(codec, "OUT3"); + snd_soc_dapm_nc_pin(codec, "OUT4"); + snd_soc_dapm_nc_pin(codec, "LINE1"); + snd_soc_dapm_nc_pin(codec, "LINE2"); + + /* Add neo1973 specific widgets */ + snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets, + ARRAY_SIZE(wm8753_dapm_widgets)); + + /* set endpoints to default mode */ + set_scenario_endpoints(codec, NEO_AUDIO_OFF); + + /* add neo1973 specific controls */ + err = snd_soc_add_controls(codec, wm8753_neo1973_controls, + ARRAY_SIZE(8753_neo1973_controls)); + if (err < 0) + return err; + + /* set up neo1973 specific audio routes */ + err = snd_soc_dapm_add_routes(codec, dapm_routes, + ARRAY_SIZE(dapm_routes)); + + snd_soc_dapm_sync(codec); + return 0; +} + +/* + * BT Codec DAI + */ +static struct snd_soc_dai bt_dai = { + .name = "bluetooth-dai", + .playback = { + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, +}; + +static struct snd_soc_dai_link neo1973_dai[] = { +{ /* Hifi Playback - for similatious use with voice below */ + .name = "WM8753", + .stream_name = "WM8753 HiFi", + .platform_name = "samsung-audio", + .cpu_dai_name = "s3c24xx-i2s", + .codec_dai_name = "wm8753-hifi", + .codec_name = "wm8753-codec.0-0x1a", + .init = neo1973_wm8753_init, + .ops = &neo1973_hifi_ops, +}, +{ /* Voice via BT */ + .name = "Bluetooth", + .stream_name = "Voice", + .platform_name = "samsung-audio", + .cpu_dai_name = "bluetooth-dai", + .codec_dai_name = "wm8753-voice", + .codec_name = "wm8753-codec.0-0x1a", + .ops = &neo1973_voice_ops, +}, +}; + +static struct snd_soc_card neo1973 = { + .name = "neo1973", + .dai_link = neo1973_dai, + .num_links = ARRAY_SIZE(neo1973_dai), +}; + +static int lm4857_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + pr_debug("Entered %s\n", __func__); + + i2c = client; + + lm4857_write_regs(); + return 0; +} + +static int lm4857_i2c_remove(struct i2c_client *client) +{ + pr_debug("Entered %s\n", __func__); + + i2c = NULL; + + return 0; +} + +static u8 lm4857_state; + +static int lm4857_suspend(struct i2c_client *dev, pm_message_t state) +{ + pr_debug("Entered %s\n", __func__); + + dev_dbg(&dev->dev, "lm4857_suspend\n"); + lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf; + if (lm4857_state) { + lm4857_regs[LM4857_CTRL] &= 0xf0; + lm4857_write_regs(); + } + return 0; +} + +static int lm4857_resume(struct i2c_client *dev) +{ + pr_debug("Entered %s\n", __func__); + + if (lm4857_state) { + lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f); + lm4857_write_regs(); + } + return 0; +} + +static void lm4857_shutdown(struct i2c_client *dev) +{ + pr_debug("Entered %s\n", __func__); + + dev_dbg(&dev->dev, "lm4857_shutdown\n"); + lm4857_regs[LM4857_CTRL] &= 0xf0; + lm4857_write_regs(); +} + +static const struct i2c_device_id lm4857_i2c_id[] = { + { "neo1973_lm4857", 0 }, + { } +}; + +static struct i2c_driver lm4857_i2c_driver = { + .driver = { + .name = "LM4857 I2C Amp", + .owner = THIS_MODULE, + }, + .suspend = lm4857_suspend, + .resume = lm4857_resume, + .shutdown = lm4857_shutdown, + .probe = lm4857_i2c_probe, + .remove = lm4857_i2c_remove, + .id_table = lm4857_i2c_id, +}; + +static struct platform_device *neo1973_snd_device; + +static int __init neo1973_init(void) +{ + int ret; + + pr_debug("Entered %s\n", __func__); + + if (!machine_is_neo1973_gta01()) { + printk(KERN_INFO + "Only GTA01 hardware supported by ASoC driver\n"); + return -ENODEV; + } + + neo1973_snd_device = platform_device_alloc("soc-audio", -1); + if (!neo1973_snd_device) + return -ENOMEM; + + platform_set_drvdata(neo1973_snd_device, &neo1973); + ret = platform_device_add(neo1973_snd_device); + + if (ret) { + platform_device_put(neo1973_snd_device); + return ret; + } + + ret = i2c_add_driver(&lm4857_i2c_driver); + + if (ret != 0) + platform_device_unregister(neo1973_snd_device); + + return ret; +} + +static void __exit neo1973_exit(void) +{ + pr_debug("Entered %s\n", __func__); + + i2c_del_driver(&lm4857_i2c_driver); + platform_device_unregister(neo1973_snd_device); +} + +module_init(neo1973_init); +module_exit(neo1973_exit); + +/* Module information */ +MODULE_AUTHOR("Graeme Gregory, graeme(a)openmoko.org, www.openmoko.org"); +MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c new file mode 100644 index 0000000..48d0b75 --- /dev/null +++ b/sound/soc/samsung/pcm.c @@ -0,0 +1,552 @@ +/* sound/soc/samsung/pcm.c + * + * ALSA SoC Audio Layer - S3C PCM-Controller driver + * + * Copyright (c) 2009 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh <jassi.brar(a)samsung.com> + * based upon I2S drivers by Ben Dooks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <plat/audio.h> +#include <plat/dma.h> + +#include "dma.h" +#include "pcm.h" + +static struct s3c2410_dma_client s3c_pcm_dma_client_out = { + .name = "PCM Stereo out" +}; + +static struct s3c2410_dma_client s3c_pcm_dma_client_in = { + .name = "PCM Stereo in" +}; + +static struct s3c_dma_params s3c_pcm_stereo_out[] = { + [0] = { + .client = &s3c_pcm_dma_client_out, + .dma_size = 4, + }, + [1] = { + .client = &s3c_pcm_dma_client_out, + .dma_size = 4, + }, +}; + +static struct s3c_dma_params s3c_pcm_stereo_in[] = { + [0] = { + .client = &s3c_pcm_dma_client_in, + .dma_size = 4, + }, + [1] = { + .client = &s3c_pcm_dma_client_in, + .dma_size = 4, + }, +}; + +static struct s3c_pcm_info s3c_pcm[2]; + +static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on) +{ + void __iomem *regs = pcm->regs; + u32 ctl, clkctl; + + clkctl = readl(regs + S3C_PCM_CLKCTL); + ctl = readl(regs + S3C_PCM_CTL); + ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK + << S3C_PCM_CTL_TXDIPSTICK_SHIFT); + + if (on) { + ctl |= S3C_PCM_CTL_TXDMA_EN; + ctl |= S3C_PCM_CTL_TXFIFO_EN; + ctl |= S3C_PCM_CTL_ENABLE; + ctl |= (0x4<<S3C_PCM_CTL_TXDIPSTICK_SHIFT); + clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; + } else { + ctl &= ~S3C_PCM_CTL_TXDMA_EN; + ctl &= ~S3C_PCM_CTL_TXFIFO_EN; + + if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) { + ctl &= ~S3C_PCM_CTL_ENABLE; + if (!pcm->idleclk) + clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; + } + } + + writel(clkctl, regs + S3C_PCM_CLKCTL); + writel(ctl, regs + S3C_PCM_CTL); +} + +static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on) +{ + void __iomem *regs = pcm->regs; + u32 ctl, clkctl; + + ctl = readl(regs + S3C_PCM_CTL); + clkctl = readl(regs + S3C_PCM_CLKCTL); + ctl &= ~(S3C_PCM_CTL_RXDIPSTICK_MASK + << S3C_PCM_CTL_RXDIPSTICK_SHIFT); + + if (on) { + ctl |= S3C_PCM_CTL_RXDMA_EN; + ctl |= S3C_PCM_CTL_RXFIFO_EN; + ctl |= S3C_PCM_CTL_ENABLE; + ctl |= (0x20<<S3C_PCM_CTL_RXDIPSTICK_SHIFT); + clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; + } else { + ctl &= ~S3C_PCM_CTL_RXDMA_EN; + ctl &= ~S3C_PCM_CTL_RXFIFO_EN; + + if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) { + ctl &= ~S3C_PCM_CTL_ENABLE; + if (!pcm->idleclk) + clkctl |= S3C_PCM_CLKCTL_SERCLK_EN; + } + } + + writel(clkctl, regs + S3C_PCM_CLKCTL); + writel(ctl, regs + S3C_PCM_CTL); +} + +static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai); + unsigned long flags; + + dev_dbg(pcm->dev, "Entered %s\n", __func__); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + spin_lock_irqsave(&pcm->lock, flags); + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + s3c_pcm_snd_rxctrl(pcm, 1); + else + s3c_pcm_snd_txctrl(pcm, 1); + + spin_unlock_irqrestore(&pcm->lock, flags); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + spin_lock_irqsave(&pcm->lock, flags); + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + s3c_pcm_snd_rxctrl(pcm, 0); + else + s3c_pcm_snd_txctrl(pcm, 0); + + spin_unlock_irqrestore(&pcm->lock, flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int s3c_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *socdai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct s3c_dma_params *dma_data; + void __iomem *regs = pcm->regs; + struct clk *clk; + int sclk_div, sync_div; + unsigned long flags; + u32 clkctl; + + dev_dbg(pcm->dev, "Entered %s\n", __func__); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dma_data = pcm->dma_playback; + else + dma_data = pcm->dma_capture; + + snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); + + /* Strictly check for sample size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&pcm->lock, flags); + + /* Get hold of the PCMSOURCE_CLK */ + clkctl = readl(regs + S3C_PCM_CLKCTL); + if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK) + clk = pcm->pclk; + else + clk = pcm->cclk; + + /* Set the SCLK divider */ + sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs / + params_rate(params) / 2 - 1; + + clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK + << S3C_PCM_CLKCTL_SCLKDIV_SHIFT); + clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK) + << S3C_PCM_CLKCTL_SCLKDIV_SHIFT); + + /* Set the SYNC divider */ + sync_div = pcm->sclk_per_fs - 1; + + clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK + << S3C_PCM_CLKCTL_SYNCDIV_SHIFT); + clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK) + << S3C_PCM_CLKCTL_SYNCDIV_SHIFT); + + writel(clkctl, regs + S3C_PCM_CLKCTL); + + spin_unlock_irqrestore(&pcm->lock, flags); + + dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n", + clk_get_rate(clk), pcm->sclk_per_fs, + sclk_div, sync_div); + + return 0; +} + +static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai); + void __iomem *regs = pcm->regs; + unsigned long flags; + int ret = 0; + u32 ctl; + + dev_dbg(pcm->dev, "Entered %s\n", __func__); + + spin_lock_irqsave(&pcm->lock, flags); + + ctl = readl(regs + S3C_PCM_CTL); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + /* Nothing to do, NB_NF by default */ + break; + default: + dev_err(pcm->dev, "Unsupported clock inversion!\n"); + ret = -EINVAL; + goto exit; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + /* Nothing to do, Master by default */ + break; + default: + dev_err(pcm->dev, "Unsupported master/slave format!\n"); + ret = -EINVAL; + goto exit; + } + + switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) { + case SND_SOC_DAIFMT_CONT: + pcm->idleclk = 1; + break; + case SND_SOC_DAIFMT_GATED: + pcm->idleclk = 0; + break; + default: + dev_err(pcm->dev, "Invalid Clock gating request!\n"); + ret = -EINVAL; + goto exit; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC; + ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC; + break; + case SND_SOC_DAIFMT_DSP_B: + ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC; + ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC; + break; + default: + dev_err(pcm->dev, "Unsupported data format!\n"); + ret = -EINVAL; + goto exit; + } + + writel(ctl, regs + S3C_PCM_CTL); + +exit: + spin_unlock_irqrestore(&pcm->lock, flags); + + return ret; +} + +static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai); + + switch (div_id) { + case S3C_PCM_SCLK_PER_FS: + pcm->sclk_per_fs = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai); + void __iomem *regs = pcm->regs; + u32 clkctl = readl(regs + S3C_PCM_CLKCTL); + + switch (clk_id) { + case S3C_PCM_CLKSRC_PCLK: + clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK; + break; + + case S3C_PCM_CLKSRC_MUX: + clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK; + + if (clk_get_rate(pcm->cclk) != freq) + clk_set_rate(pcm->cclk, freq); + + break; + + default: + return -EINVAL; + } + + writel(clkctl, regs + S3C_PCM_CLKCTL); + + return 0; +} + +static struct snd_soc_dai_ops s3c_pcm_dai_ops = { + .set_sysclk = s3c_pcm_set_sysclk, + .set_clkdiv = s3c_pcm_set_clkdiv, + .trigger = s3c_pcm_trigger, + .hw_params = s3c_pcm_hw_params, + .set_fmt = s3c_pcm_set_fmt, +}; + +#define S3C_PCM_RATES SNDRV_PCM_RATE_8000_96000 + +#define S3C_PCM_DAI_DECLARE \ + .symmetric_rates = 1, \ + .ops = &s3c_pcm_dai_ops, \ + .playback = { \ + .channels_min = 2, \ + .channels_max = 2, \ + .rates = S3C_PCM_RATES, \ + .formats = SNDRV_PCM_FMTBIT_S16_LE, \ + }, \ + .capture = { \ + .channels_min = 2, \ + .channels_max = 2, \ + .rates = S3C_PCM_RATES, \ + .formats = SNDRV_PCM_FMTBIT_S16_LE, \ + } + +struct snd_soc_dai_driver s3c_pcm_dai[] = { + [0] = { + .name = "samsung-pcm.0", + S3C_PCM_DAI_DECLARE, + }, + [1] = { + .name = "samsung-pcm.1", + S3C_PCM_DAI_DECLARE, + }, +}; +EXPORT_SYMBOL_GPL(s3c_pcm_dai); + +static __devinit int s3c_pcm_dev_probe(struct platform_device *pdev) +{ + struct s3c_pcm_info *pcm; + struct resource *mem_res, *dmatx_res, *dmarx_res; + struct s3c_audio_pdata *pcm_pdata; + int ret; + + /* Check for valid device index */ + if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) { + dev_err(&pdev->dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + pcm_pdata = pdev->dev.platform_data; + + /* Check for availability of necessary resource */ + dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dmatx_res) { + dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n"); + return -ENXIO; + } + + dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!dmarx_res) { + dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n"); + return -ENXIO; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_res) { + dev_err(&pdev->dev, "Unable to get register resource\n"); + return -ENXIO; + } + + if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to configure gpio\n"); + return -EINVAL; + } + + pcm = &s3c_pcm[pdev->id]; + pcm->dev = &pdev->dev; + + spin_lock_init(&pcm->lock); + + /* Default is 128fs */ + pcm->sclk_per_fs = 128; + + pcm->cclk = clk_get(&pdev->dev, "audio-bus"); + if (IS_ERR(pcm->cclk)) { + dev_err(&pdev->dev, "failed to get audio-bus\n"); + ret = PTR_ERR(pcm->cclk); + goto err1; + } + clk_enable(pcm->cclk); + + /* record our pcm structure for later use in the callbacks */ + dev_set_drvdata(&pdev->dev, pcm); + + if (!request_mem_region(mem_res->start, + resource_size(mem_res), "samsung-pcm")) { + dev_err(&pdev->dev, "Unable to request register region\n"); + ret = -EBUSY; + goto err2; + } + + pcm->regs = ioremap(mem_res->start, 0x100); + if (pcm->regs == NULL) { + dev_err(&pdev->dev, "cannot ioremap registers\n"); + ret = -ENXIO; + goto err3; + } + + pcm->pclk = clk_get(&pdev->dev, "pcm"); + if (IS_ERR(pcm->pclk)) { + dev_err(&pdev->dev, "failed to get pcm_clock\n"); + ret = -ENOENT; + goto err4; + } + clk_enable(pcm->pclk); + + ret = snd_soc_register_dai(&pdev->dev, &s3c_pcm_dai[pdev->id]); + if (ret != 0) { + dev_err(&pdev->dev, "failed to get pcm_clock\n"); + goto err5; + } + + s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start + + S3C_PCM_RXFIFO; + s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start + + S3C_PCM_TXFIFO; + + s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start; + s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start; + + pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id]; + pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id]; + + return 0; + +err5: + clk_disable(pcm->pclk); + clk_put(pcm->pclk); +err4: + iounmap(pcm->regs); +err3: + release_mem_region(mem_res->start, resource_size(mem_res)); +err2: + clk_disable(pcm->cclk); + clk_put(pcm->cclk); +err1: + return ret; +} + +static __devexit int s3c_pcm_dev_remove(struct platform_device *pdev) +{ + struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id]; + struct resource *mem_res; + + snd_soc_unregister_dai(&pdev->dev); + + iounmap(pcm->regs); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem_res->start, resource_size(mem_res)); + + clk_disable(pcm->cclk); + clk_disable(pcm->pclk); + clk_put(pcm->pclk); + clk_put(pcm->cclk); + + return 0; +} + +static struct platform_driver s3c_pcm_driver = { + .probe = s3c_pcm_dev_probe, + .remove = s3c_pcm_dev_remove, + .driver = { + .name = "samsung-pcm", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c_pcm_init(void) +{ + return platform_driver_register(&s3c_pcm_driver); +} +module_init(s3c_pcm_init); + +static void __exit s3c_pcm_exit(void) +{ + platform_driver_unregister(&s3c_pcm_driver); +} +module_exit(s3c_pcm_exit); + +/* Module information */ +MODULE_AUTHOR("Jaswinder Singh, <jassi.brar(a)samsung.com>"); +MODULE_DESCRIPTION("S3C PCM Controller Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-pcm"); diff --git a/sound/soc/samsung/pcm.h b/sound/soc/samsung/pcm.h new file mode 100644 index 0000000..03393dc --- /dev/null +++ b/sound/soc/samsung/pcm.h @@ -0,0 +1,124 @@ +/* sound/soc/samsung/pcm.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __S3C_PCM_H +#define __S3C_PCM_H __FILE__ + +/*Register Offsets */ +#define S3C_PCM_CTL (0x00) +#define S3C_PCM_CLKCTL (0x04) +#define S3C_PCM_TXFIFO (0x08) +#define S3C_PCM_RXFIFO (0x0C) +#define S3C_PCM_IRQCTL (0x10) +#define S3C_PCM_IRQSTAT (0x14) +#define S3C_PCM_FIFOSTAT (0x18) +#define S3C_PCM_CLRINT (0x20) + +/* PCM_CTL Bit-Fields */ +#define S3C_PCM_CTL_TXDIPSTICK_MASK (0x3f) +#define S3C_PCM_CTL_TXDIPSTICK_SHIFT (13) +#define S3C_PCM_CTL_RXDIPSTICK_MASK (0x3f) +#define S3C_PCM_CTL_RXDIPSTICK_SHIFT (7) +#define S3C_PCM_CTL_TXDMA_EN (0x1<<6) +#define S3C_PCM_CTL_RXDMA_EN (0x1<<5) +#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC (0x1<<4) +#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC (0x1<<3) +#define S3C_PCM_CTL_TXFIFO_EN (0x1<<2) +#define S3C_PCM_CTL_RXFIFO_EN (0x1<<1) +#define S3C_PCM_CTL_ENABLE (0x1<<0) + +/* PCM_CLKCTL Bit-Fields */ +#define S3C_PCM_CLKCTL_SERCLK_EN (0x1<<19) +#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK (0x1<<18) +#define S3C_PCM_CLKCTL_SCLKDIV_MASK (0x1ff) +#define S3C_PCM_CLKCTL_SYNCDIV_MASK (0x1ff) +#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT (9) +#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT (0) + +/* PCM_TXFIFO Bit-Fields */ +#define S3C_PCM_TXFIFO_DVALID (0x1<<16) +#define S3C_PCM_TXFIFO_DATA_MSK (0xffff<<0) + +/* PCM_RXFIFO Bit-Fields */ +#define S3C_PCM_RXFIFO_DVALID (0x1<<16) +#define S3C_PCM_RXFIFO_DATA_MSK (0xffff<<0) + +/* PCM_IRQCTL Bit-Fields */ +#define S3C_PCM_IRQCTL_IRQEN (0x1<<14) +#define S3C_PCM_IRQCTL_WRDEN (0x1<<12) +#define S3C_PCM_IRQCTL_TXEMPTYEN (0x1<<11) +#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN (0x1<<10) +#define S3C_PCM_IRQCTL_TXFULLEN (0x1<<9) +#define S3C_PCM_IRQCTL_TXALMSTFULLEN (0x1<<8) +#define S3C_PCM_IRQCTL_TXSTARVEN (0x1<<7) +#define S3C_PCM_IRQCTL_TXERROVRFLEN (0x1<<6) +#define S3C_PCM_IRQCTL_RXEMPTEN (0x1<<5) +#define S3C_PCM_IRQCTL_RXALMSTEMPTEN (0x1<<4) +#define S3C_PCM_IRQCTL_RXFULLEN (0x1<<3) +#define S3C_PCM_IRQCTL_RXALMSTFULLEN (0x1<<2) +#define S3C_PCM_IRQCTL_RXSTARVEN (0x1<<1) +#define S3C_PCM_IRQCTL_RXERROVRFLEN (0x1<<0) + +/* PCM_IRQSTAT Bit-Fields */ +#define S3C_PCM_IRQSTAT_IRQPND (0x1<<13) +#define S3C_PCM_IRQSTAT_WRD_XFER (0x1<<12) +#define S3C_PCM_IRQSTAT_TXEMPTY (0x1<<11) +#define S3C_PCM_IRQSTAT_TXALMSTEMPTY (0x1<<10) +#define S3C_PCM_IRQSTAT_TXFULL (0x1<<9) +#define S3C_PCM_IRQSTAT_TXALMSTFULL (0x1<<8) +#define S3C_PCM_IRQSTAT_TXSTARV (0x1<<7) +#define S3C_PCM_IRQSTAT_TXERROVRFL (0x1<<6) +#define S3C_PCM_IRQSTAT_RXEMPT (0x1<<5) +#define S3C_PCM_IRQSTAT_RXALMSTEMPT (0x1<<4) +#define S3C_PCM_IRQSTAT_RXFULL (0x1<<3) +#define S3C_PCM_IRQSTAT_RXALMSTFULL (0x1<<2) +#define S3C_PCM_IRQSTAT_RXSTARV (0x1<<1) +#define S3C_PCM_IRQSTAT_RXERROVRFL (0x1<<0) + +/* PCM_FIFOSTAT Bit-Fields */ +#define S3C_PCM_FIFOSTAT_TXCNT_MSK (0x3f<<14) +#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY (0x1<<13) +#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY (0x1<<12) +#define S3C_PCM_FIFOSTAT_TXFIFOFULL (0x1<<11) +#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL (0x1<<10) +#define S3C_PCM_FIFOSTAT_RXCNT_MSK (0x3f<<4) +#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY (0x1<<3) +#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY (0x1<<2) +#define S3C_PCM_FIFOSTAT_RXFIFOFULL (0x1<<1) +#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL (0x1<<0) + +#define S3C_PCM_CLKSRC_PCLK 0 +#define S3C_PCM_CLKSRC_MUX 1 + +#define S3C_PCM_SCLK_PER_FS 0 + +/** + * struct s3c_pcm_info - S3C PCM Controller information + * @dev: The parent device passed to use from the probe. + * @regs: The pointer to the device register block. + * @dma_playback: DMA information for playback channel. + * @dma_capture: DMA information for capture channel. + */ +struct s3c_pcm_info { + spinlock_t lock; + struct device *dev; + void __iomem *regs; + + unsigned int sclk_per_fs; + + /* Whether to keep PCMSCLK enabled even when idle(no active xfer) */ + unsigned int idleclk; + + struct clk *pclk; + struct clk *cclk; + + struct s3c_dma_params *dma_playback; + struct s3c_dma_params *dma_capture; +}; + +#endif /* __S3C_PCM_H */ diff --git a/sound/soc/samsung/regs-i2s-v2.h b/sound/soc/samsung/regs-i2s-v2.h new file mode 100644 index 0000000..5e5e568 --- /dev/null +++ b/sound/soc/samsung/regs-i2s-v2.h @@ -0,0 +1,115 @@ +/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h + * + * Copyright 2007 Simtec Electronics <linux(a)simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H +#define __ASM_ARCH_REGS_S3C2412_IIS_H + +#define S3C2412_IISCON (0x00) +#define S3C2412_IISMOD (0x04) +#define S3C2412_IISFIC (0x08) +#define S3C2412_IISPSR (0x0C) +#define S3C2412_IISTXD (0x10) +#define S3C2412_IISRXD (0x14) + +#define S5PC1XX_IISFICS 0x18 +#define S5PC1XX_IISTXDS 0x1C + +#define S5PC1XX_IISCON_SW_RST (1 << 31) +#define S5PC1XX_IISCON_FRXOFSTATUS (1 << 26) +#define S5PC1XX_IISCON_FRXORINTEN (1 << 25) +#define S5PC1XX_IISCON_FTXSURSTAT (1 << 24) +#define S5PC1XX_IISCON_FTXSURINTEN (1 << 23) +#define S5PC1XX_IISCON_TXSDMAPAUSE (1 << 20) +#define S5PC1XX_IISCON_TXSDMACTIVE (1 << 18) + +#define S3C64XX_IISCON_FTXURSTATUS (1 << 17) +#define S3C64XX_IISCON_FTXURINTEN (1 << 16) +#define S3C64XX_IISCON_TXFIFO2_EMPTY (1 << 15) +#define S3C64XX_IISCON_TXFIFO1_EMPTY (1 << 14) +#define S3C64XX_IISCON_TXFIFO2_FULL (1 << 13) +#define S3C64XX_IISCON_TXFIFO1_FULL (1 << 12) + +#define S3C2412_IISCON_LRINDEX (1 << 11) +#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) +#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) +#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) +#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) +#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) +#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) +#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) +#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) +#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) +#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) +#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) + +#define S5PC1XX_IISMOD_OPCLK_CDCLK_OUT (0 << 30) +#define S5PC1XX_IISMOD_OPCLK_CDCLK_IN (1 << 30) +#define S5PC1XX_IISMOD_OPCLK_BCLK_OUT (2 << 30) +#define S5PC1XX_IISMOD_OPCLK_PCLK (3 << 30) +#define S5PC1XX_IISMOD_OPCLK_MASK (3 << 30) +#define S5PC1XX_IISMOD_TXS_IDMA (1 << 28) /* Sec_TXFIFO use I-DMA */ +#define S5PC1XX_IISMOD_BLCS_MASK 0x3 +#define S5PC1XX_IISMOD_BLCS_SHIFT 26 +#define S5PC1XX_IISMOD_BLCP_MASK 0x3 +#define S5PC1XX_IISMOD_BLCP_SHIFT 24 + +#define S3C64XX_IISMOD_C2DD_HHALF (1 << 21) /* Discard Higher-half */ +#define S3C64XX_IISMOD_C2DD_LHALF (1 << 20) /* Discard Lower-half */ +#define S3C64XX_IISMOD_C1DD_HHALF (1 << 19) +#define S3C64XX_IISMOD_C1DD_LHALF (1 << 18) +#define S3C64XX_IISMOD_DC2_EN (1 << 17) +#define S3C64XX_IISMOD_DC1_EN (1 << 16) +#define S3C64XX_IISMOD_BLC_16BIT (0 << 13) +#define S3C64XX_IISMOD_BLC_8BIT (1 << 13) +#define S3C64XX_IISMOD_BLC_24BIT (2 << 13) +#define S3C64XX_IISMOD_BLC_MASK (3 << 13) + +#define S3C2412_IISMOD_IMS_SYSMUX (1 << 10) +#define S3C2412_IISMOD_SLAVE (1 << 11) +#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) +#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) +#define S3C2412_IISMOD_MODE_TXRX (2 << 8) +#define S3C2412_IISMOD_MODE_MASK (3 << 8) +#define S3C2412_IISMOD_LR_LLOW (0 << 7) +#define S3C2412_IISMOD_LR_RLOW (1 << 7) +#define S3C2412_IISMOD_SDF_IIS (0 << 5) +#define S3C2412_IISMOD_SDF_MSB (1 << 5) +#define S3C2412_IISMOD_SDF_LSB (2 << 5) +#define S3C2412_IISMOD_SDF_MASK (3 << 5) +#define S3C2412_IISMOD_RCLK_256FS (0 << 3) +#define S3C2412_IISMOD_RCLK_512FS (1 << 3) +#define S3C2412_IISMOD_RCLK_384FS (2 << 3) +#define S3C2412_IISMOD_RCLK_768FS (3 << 3) +#define S3C2412_IISMOD_RCLK_MASK (3 << 3) +#define S3C2412_IISMOD_BCLK_32FS (0 << 1) +#define S3C2412_IISMOD_BCLK_48FS (1 << 1) +#define S3C2412_IISMOD_BCLK_16FS (2 << 1) +#define S3C2412_IISMOD_BCLK_24FS (3 << 1) +#define S3C2412_IISMOD_BCLK_MASK (3 << 1) +#define S3C2412_IISMOD_8BIT (1 << 0) + +#define S3C64XX_IISMOD_CDCLKCON (1 << 12) + +#define S3C2412_IISPSR_PSREN (1 << 15) + +#define S3C64XX_IISFIC_TX2COUNT(x) (((x) >> 24) & 0xf) +#define S3C64XX_IISFIC_TX1COUNT(x) (((x) >> 16) & 0xf) + +#define S3C2412_IISFIC_TXFLUSH (1 << 15) +#define S3C2412_IISFIC_RXFLUSH (1 << 7) +#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) + +#define S5PC1XX_IISFICS_TXFLUSH (1 << 15) +#define S5PC1XX_IISFICS_TXCOUNT(x) (((x) >> 8) & 0x7f) + +#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c new file mode 100644 index 0000000..07197ee --- /dev/null +++ b/sound/soc/samsung/rx1950_uda1380.c @@ -0,0 +1,333 @@ +/* + * rx1950.c -- ALSA Soc Audio Layer + * + * Copyright (c) 2010 Vasily Khoruzhick <anarsoul(a)gmail.com> + * + * Based on smdk2440.c and magician.c + * + * Authors: Graeme Gregory graeme.gregory(a)wolfsonmicro.com + * Philipp Zabel <philipp.zabel(a)gmail.com> + * Denis Grigoriev <dgreenday(a)gmail.com> + * Vasily Khoruzhick <anarsoul(a)gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/clk.h> + +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/uda1380.h> +#include <sound/jack.h> + +#include <plat/regs-iis.h> + +#include <mach/regs-clock.h> + +#include <asm/mach-types.h> + +#include "dma.h" +#include "s3c24xx-i2s.h" +#include "../codecs/uda1380.h" + +static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd); +static int rx1950_startup(struct snd_pcm_substream *substream); +static int rx1950_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params); +static int rx1950_spk_power(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); + +static unsigned int rates[] = { + 16000, + 44100, + 48000, + 88200, +}; + +static struct snd_pcm_hw_constraint_list hw_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0, +}; + +static struct snd_soc_jack hp_jack; + +static struct snd_soc_jack_pin hp_jack_pins[] = { + { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Speaker", + .mask = SND_JACK_HEADPHONE, + .invert = 1, + }, +}; + +static struct snd_soc_jack_gpio hp_jack_gpios[] = { + [0] = { + .gpio = S3C2410_GPG(12), + .name = "hp-gpio", + .report = SND_JACK_HEADPHONE, + .invert = 1, + .debounce_time = 200, + }, +}; + +static struct snd_soc_ops rx1950_ops = { + .startup = rx1950_startup, + .hw_params = rx1950_hw_params, +}; + +/* s3c24xx digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link rx1950_uda1380_dai[] = { + { + .name = "uda1380", + .stream_name = "UDA1380 Duplex", + .cpu_dai_name = "s3c24xx-iis", + .codec_dai_name = "uda1380-hifi", + .init = rx1950_uda1380_init, + .platform_name = "samsung-audio", + .codec_name = "uda1380-codec.0-001a", + .ops = &rx1950_ops, + }, +}; + +static struct snd_soc_card rx1950_asoc = { + .name = "rx1950", + .dai_link = rx1950_uda1380_dai, + .num_links = ARRAY_SIZE(rx1950_uda1380_dai), +}; + +/* rx1950 machine dapm widgets */ +static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power), +}; + +/* rx1950 machine audio_map */ +static const struct snd_soc_dapm_route audio_map[] = { + /* headphone connected to VOUTLHP, VOUTRHP */ + {"Headphone Jack", NULL, "VOUTLHP"}, + {"Headphone Jack", NULL, "VOUTRHP"}, + + /* ext speaker connected to VOUTL, VOUTR */ + {"Speaker", NULL, "VOUTL"}, + {"Speaker", NULL, "VOUTR"}, + + /* mic is connected to VINM */ + {"VINM", NULL, "Mic Jack"}, +}; + +static struct platform_device *s3c24xx_snd_device; +static struct clk *xtal; + +static int rx1950_startup(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + runtime->hw.rate_min = hw_rates.list[0]; + runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1]; + runtime->hw.rates = SNDRV_PCM_RATE_KNOT; + + return snd_pcm_hw_constraint_list(runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &hw_rates); +} + +static int rx1950_spk_power(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (SND_SOC_DAPM_EVENT_ON(event)) + gpio_set_value(S3C2410_GPA(1), 1); + else + gpio_set_value(S3C2410_GPA(1), 0); + + return 0; +} + +static int rx1950_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int div; + int ret; + unsigned int rate = params_rate(params); + int clk_source, fs_mode; + + switch (rate) { + case 16000: + case 48000: + clk_source = S3C24XX_CLKSRC_PCLK; + fs_mode = S3C2410_IISMOD_256FS; + div = s3c24xx_i2s_get_clockrate() / (256 * rate); + if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate)) + div++; + break; + case 44100: + case 88200: + clk_source = S3C24XX_CLKSRC_MPLL; + fs_mode = S3C2410_IISMOD_256FS; + div = clk_get_rate(xtal) / (256 * rate); + if (clk_get_rate(xtal) % (256 * rate) > (128 * rate)) + div++; + break; + default: + printk(KERN_ERR "%s: rate %d is not supported\n", + __func__, rate); + return -EINVAL; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* select clock source */ + ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate, + SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + /* set MCLK division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, + S3C2410_IISMOD_384FS); + if (ret < 0) + return ret; + + /* set BCLK division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK, + S3C2410_IISMOD_32FS); + if (ret < 0) + return ret; + + /* set prescaler division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + S3C24XX_PRESCALE(div, div)); + if (ret < 0) + return ret; + + return 0; +} + +static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + int err; + + /* Add rx1950 specific widgets */ + err = snd_soc_dapm_new_controls(codec, uda1380_dapm_widgets, + ARRAY_SIZE(uda1380_dapm_widgets)); + + if (err) + return err; + + /* Set up rx1950 specific audio path audio_mapnects */ + err = snd_soc_dapm_add_routes(codec, audio_map, + ARRAY_SIZE(audio_map)); + + if (err) + return err; + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Speaker"); + + snd_soc_dapm_sync(codec); + + snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE, + &hp_jack); + + snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins), + hp_jack_pins); + + snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), + hp_jack_gpios); + + return 0; +} + +static int __init rx1950_init(void) +{ + int ret; + + if (!machine_is_rx1950()) + return -ENODEV; + + /* configure some gpios */ + ret = gpio_request(S3C2410_GPA(1), "speaker-power"); + if (ret) + goto err_gpio; + + ret = gpio_direction_output(S3C2410_GPA(1), 0); + if (ret) + goto err_gpio_conf; + + s3c24xx_snd_device = platform_device_alloc("soc-audio", -1); + if (!s3c24xx_snd_device) { + ret = -ENOMEM; + goto err_plat_alloc; + } + + platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc); + ret = platform_device_add(s3c24xx_snd_device); + + if (ret) { + platform_device_put(s3c24xx_snd_device); + goto err_plat_add; + } + + xtal = clk_get(&s3c24xx_snd_device->dev, "xtal"); + + if (IS_ERR(xtal)) { + ret = PTR_ERR(xtal); + platform_device_unregister(s3c24xx_snd_device); + goto err_clk; + } + + return 0; + +err_clk: +err_plat_add: +err_plat_alloc: +err_gpio_conf: + gpio_free(S3C2410_GPA(1)); + +err_gpio: + return ret; +} + +static void __exit rx1950_exit(void) +{ + platform_device_unregister(s3c24xx_snd_device); + snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), + hp_jack_gpios); + clk_put(xtal); + gpio_free(S3C2410_GPA(1)); +} + +module_init(rx1950_init); +module_exit(rx1950_exit); + +/* Module information */ +MODULE_AUTHOR("Vasily Khoruzhick"); +MODULE_DESCRIPTION("ALSA SoC RX1950"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c new file mode 100644 index 0000000..094f36e --- /dev/null +++ b/sound/soc/samsung/s3c-i2s-v2.c @@ -0,0 +1,757 @@ +/* sound/soc/samsung/s3c-i2c-v2.c + * + * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs. + * + * Copyright (c) 2006 Wolfson Microelectronics PLC. + * Graeme Gregory graeme.gregory(a)wolfsonmicro.com + * linux(a)wolfsonmicro.com + * + * Copyright (c) 2008, 2007, 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben(a)simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <mach/dma.h> + +#include "regs-i2s-v2.h" +#include "s3c-i2s-v2.h" +#include "dma.h" + +#undef S3C_IIS_V2_SUPPORTED + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \ + || defined(CONFIG_CPU_S5PV210) +#define S3C_IIS_V2_SUPPORTED +#endif + +#ifdef CONFIG_PLAT_S3C64XX +#define S3C_IIS_V2_SUPPORTED +#endif + +#ifndef S3C_IIS_V2_SUPPORTED +#error Unsupported CPU model +#endif + +#define S3C2412_I2S_DEBUG_CON 0 + +static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai) +{ + return snd_soc_dai_get_drvdata(cpu_dai); +} + +#define bit_set(v, b) (((v) & (b)) ? 1 : 0) + +#if S3C2412_I2S_DEBUG_CON +static void dbg_showcon(const char *fn, u32 con) +{ + printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn, + bit_set(con, S3C2412_IISCON_LRINDEX), + bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY), + bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY), + bit_set(con, S3C2412_IISCON_TXFIFO_FULL), + bit_set(con, S3C2412_IISCON_RXFIFO_FULL)); + + printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n", + fn, + bit_set(con, S3C2412_IISCON_TXDMA_PAUSE), + bit_set(con, S3C2412_IISCON_RXDMA_PAUSE), + bit_set(con, S3C2412_IISCON_TXCH_PAUSE), + bit_set(con, S3C2412_IISCON_RXCH_PAUSE)); + printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn, + bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE), + bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE), + bit_set(con, S3C2412_IISCON_IIS_ACTIVE)); +} +#else +static inline void dbg_showcon(const char *fn, u32 con) +{ +} +#endif + + +/* Turn on or off the transmission path. */ +static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on) +{ + void __iomem *regs = i2s->regs; + u32 fic, con, mod; + + pr_debug("%s(%d)\n", __func__, on); + + fic = readl(regs + S3C2412_IISFIC); + con = readl(regs + S3C2412_IISCON); + mod = readl(regs + S3C2412_IISMOD); + + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + + if (on) { + con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; + con &= ~S3C2412_IISCON_TXDMA_PAUSE; + con &= ~S3C2412_IISCON_TXCH_PAUSE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_TXONLY: + case S3C2412_IISMOD_MODE_TXRX: + /* do nothing, we are in the right mode */ + break; + + case S3C2412_IISMOD_MODE_RXONLY: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_TXRX; + break; + + default: + dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); + break; + } + + writel(con, regs + S3C2412_IISCON); + writel(mod, regs + S3C2412_IISMOD); + } else { + /* Note, we do not have any indication that the FIFO problems + * tha the S3C2410/2440 had apply here, so we should be able + * to disable the DMA and TX without resetting the FIFOS. + */ + + con |= S3C2412_IISCON_TXDMA_PAUSE; + con |= S3C2412_IISCON_TXCH_PAUSE; + con &= ~S3C2412_IISCON_TXDMA_ACTIVE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_TXRX: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_RXONLY; + break; + + case S3C2412_IISMOD_MODE_TXONLY: + mod &= ~S3C2412_IISMOD_MODE_MASK; + con &= ~S3C2412_IISCON_IIS_ACTIVE; + break; + + default: + dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); + break; + } + + writel(mod, regs + S3C2412_IISMOD); + writel(con, regs + S3C2412_IISCON); + } + + fic = readl(regs + S3C2412_IISFIC); + dbg_showcon(__func__, con); + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); +} + +static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on) +{ + void __iomem *regs = i2s->regs; + u32 fic, con, mod; + + pr_debug("%s(%d)\n", __func__, on); + + fic = readl(regs + S3C2412_IISFIC); + con = readl(regs + S3C2412_IISCON); + mod = readl(regs + S3C2412_IISMOD); + + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); + + if (on) { + con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE; + con &= ~S3C2412_IISCON_RXDMA_PAUSE; + con &= ~S3C2412_IISCON_RXCH_PAUSE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_TXRX: + case S3C2412_IISMOD_MODE_RXONLY: + /* do nothing, we are in the right mode */ + break; + + case S3C2412_IISMOD_MODE_TXONLY: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_TXRX; + break; + + default: + dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); + } + + writel(mod, regs + S3C2412_IISMOD); + writel(con, regs + S3C2412_IISCON); + } else { + /* See txctrl notes on FIFOs. */ + + con &= ~S3C2412_IISCON_RXDMA_ACTIVE; + con |= S3C2412_IISCON_RXDMA_PAUSE; + con |= S3C2412_IISCON_RXCH_PAUSE; + + switch (mod & S3C2412_IISMOD_MODE_MASK) { + case S3C2412_IISMOD_MODE_RXONLY: + con &= ~S3C2412_IISCON_IIS_ACTIVE; + mod &= ~S3C2412_IISMOD_MODE_MASK; + break; + + case S3C2412_IISMOD_MODE_TXRX: + mod &= ~S3C2412_IISMOD_MODE_MASK; + mod |= S3C2412_IISMOD_MODE_TXONLY; + break; + + default: + dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n", + mod & S3C2412_IISMOD_MODE_MASK); + } + + writel(con, regs + S3C2412_IISCON); + writel(mod, regs + S3C2412_IISMOD); + } + + fic = readl(regs + S3C2412_IISFIC); + pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic); +} + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +/* + * Wait for the LR signal to allow synchronisation to the L/R clock + * from the codec. May only be needed for slave mode. + */ +static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s) +{ + u32 iiscon; + unsigned long loops = msecs_to_loops(5); + + pr_debug("Entered %s\n", __func__); + + while (--loops) { + iiscon = readl(i2s->regs + S3C2412_IISCON); + if (iiscon & S3C2412_IISCON_LRINDEX) + break; + + cpu_relax(); + } + + if (!loops) { + printk(KERN_ERR "%s: timeout\n", __func__); + return -ETIMEDOUT; + } + + return 0; +} + +/* + * Set S3C2412 I2S DAI format + */ +static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 iismod; + + pr_debug("Entered %s\n", __func__); + + iismod = readl(i2s->regs + S3C2412_IISMOD); + pr_debug("hw_params r: IISMOD: %x \n", iismod); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + i2s->master = 0; + iismod |= S3C2412_IISMOD_SLAVE; + break; + case SND_SOC_DAIFMT_CBS_CFS: + i2s->master = 1; + iismod &= ~S3C2412_IISMOD_SLAVE; + break; + default: + pr_err("unknwon master/slave format\n"); + return -EINVAL; + } + + iismod &= ~S3C2412_IISMOD_SDF_MASK; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + iismod |= S3C2412_IISMOD_LR_RLOW; + iismod |= S3C2412_IISMOD_SDF_MSB; + break; + case SND_SOC_DAIFMT_LEFT_J: + iismod |= S3C2412_IISMOD_LR_RLOW; + iismod |= S3C2412_IISMOD_SDF_LSB; + break; + case SND_SOC_DAIFMT_I2S: + iismod &= ~S3C2412_IISMOD_LR_RLOW; + iismod |= S3C2412_IISMOD_SDF_IIS; + break; + default: + pr_err("Unknown data format\n"); + return -EINVAL; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + pr_debug("hw_params w: IISMOD: %x \n", iismod); + return 0; +} + +static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + struct s3c_dma_params *dma_data; + u32 iismod; + + pr_debug("Entered %s\n", __func__); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dma_data = i2s->dma_playback; + else + dma_data = i2s->dma_capture; + + snd_soc_dai_set_dma_data(dai, substream, dma_data); + + /* Working copies of register */ + iismod = readl(i2s->regs + S3C2412_IISMOD); + pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); + + iismod &= ~S3C64XX_IISMOD_BLC_MASK; + /* Sample size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + iismod |= S3C64XX_IISMOD_BLC_8BIT; + break; + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S24_LE: + iismod |= S3C64XX_IISMOD_BLC_24BIT; + break; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); + + return 0; +} + +static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 iismod = readl(i2s->regs + S3C2412_IISMOD); + + pr_debug("Entered %s\n", __func__); + pr_debug("%s r: IISMOD: %x\n", __func__, iismod); + + switch (clk_id) { + case S3C_I2SV2_CLKSRC_PCLK: + iismod &= ~S3C2412_IISMOD_IMS_SYSMUX; + break; + + case S3C_I2SV2_CLKSRC_AUDIOBUS: + iismod |= S3C2412_IISMOD_IMS_SYSMUX; + break; + + case S3C_I2SV2_CLKSRC_CDCLK: + /* Error if controller doesn't have the CDCLKCON bit */ + if (!(i2s->feature & S3C_FEATURE_CDCLKCON)) + return -EINVAL; + + switch (dir) { + case SND_SOC_CLOCK_IN: + iismod |= S3C64XX_IISMOD_CDCLKCON; + break; + case SND_SOC_CLOCK_OUT: + iismod &= ~S3C64XX_IISMOD_CDCLKCON; + break; + default: + return -EINVAL; + } + break; + + default: + return -EINVAL; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + pr_debug("%s w: IISMOD: %x\n", __func__, iismod); + + return 0; +} + +static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s3c_i2sv2_info *i2s = to_info(rtd->cpu_dai); + int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE); + unsigned long irqs; + int ret = 0; + struct s3c_dma_params *dma_data = + snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + + pr_debug("Entered %s\n", __func__); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + /* On start, ensure that the FIFOs are cleared and reset. */ + + writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH, + i2s->regs + S3C2412_IISFIC); + + /* clear again, just in case */ + writel(0x0, i2s->regs + S3C2412_IISFIC); + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (!i2s->master) { + ret = s3c2412_snd_lrsync(i2s); + if (ret) + goto exit_err; + } + + local_irq_save(irqs); + + if (capture) + s3c2412_snd_rxctrl(i2s, 1); + else + s3c2412_snd_txctrl(i2s, 1); + + local_irq_restore(irqs); + + /* + * Load the next buffer to DMA to meet the reqirement + * of the auto reload mechanism of S3C24XX. + * This call won't bother S3C64XX. + */ + s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + local_irq_save(irqs); + + if (capture) + s3c2412_snd_rxctrl(i2s, 0); + else + s3c2412_snd_txctrl(i2s, 0); + + local_irq_restore(irqs); + break; + default: + ret = -EINVAL; + break; + } + +exit_err: + return ret; +} + +/* + * Set S3C2412 Clock dividers + */ +static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 reg; + + pr_debug("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div); + + switch (div_id) { + case S3C_I2SV2_DIV_BCLK: + switch (div) { + case 16: + div = S3C2412_IISMOD_BCLK_16FS; + break; + + case 32: + div = S3C2412_IISMOD_BCLK_32FS; + break; + + case 24: + div = S3C2412_IISMOD_BCLK_24FS; + break; + + case 48: + div = S3C2412_IISMOD_BCLK_48FS; + break; + + default: + return -EINVAL; + } + + reg = readl(i2s->regs + S3C2412_IISMOD); + reg &= ~S3C2412_IISMOD_BCLK_MASK; + writel(reg | div, i2s->regs + S3C2412_IISMOD); + + pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); + break; + + case S3C_I2SV2_DIV_RCLK: + switch (div) { + case 256: + div = S3C2412_IISMOD_RCLK_256FS; + break; + + case 384: + div = S3C2412_IISMOD_RCLK_384FS; + break; + + case 512: + div = S3C2412_IISMOD_RCLK_512FS; + break; + + case 768: + div = S3C2412_IISMOD_RCLK_768FS; + break; + + default: + return -EINVAL; + } + + reg = readl(i2s->regs + S3C2412_IISMOD); + reg &= ~S3C2412_IISMOD_RCLK_MASK; + writel(reg | div, i2s->regs + S3C2412_IISMOD); + pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD)); + break; + + case S3C_I2SV2_DIV_PRESCALER: + if (div >= 0) { + writel((div << 8) | S3C2412_IISPSR_PSREN, + i2s->regs + S3C2412_IISPSR); + } else { + writel(0x0, i2s->regs + S3C2412_IISPSR); + } + pr_debug("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR)); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static snd_pcm_sframes_t s3c2412_i2s_delay(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + u32 reg = readl(i2s->regs + S3C2412_IISFIC); + snd_pcm_sframes_t delay; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + delay = S3C2412_IISFIC_TXCOUNT(reg); + else + delay = S3C2412_IISFIC_RXCOUNT(reg); + + return delay; +} + +struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai) +{ + struct s3c_i2sv2_info *i2s = to_info(cpu_dai); + u32 iismod = readl(i2s->regs + S3C2412_IISMOD); + + if (iismod & S3C2412_IISMOD_IMS_SYSMUX) + return i2s->iis_cclk; + else + return i2s->iis_pclk; +} +EXPORT_SYMBOL_GPL(s3c_i2sv2_get_clock); + +/* default table of all avaialable root fs divisors */ +static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 }; + +int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, + unsigned int *fstab, + unsigned int rate, struct clk *clk) +{ + unsigned long clkrate = clk_get_rate(clk); + unsigned int div; + unsigned int fsclk; + unsigned int actual; + unsigned int fs; + unsigned int fsdiv; + signed int deviation = 0; + unsigned int best_fs = 0; + unsigned int best_div = 0; + unsigned int best_rate = 0; + unsigned int best_deviation = INT_MAX; + + pr_debug("Input clock rate %ldHz\n", clkrate); + + if (fstab == NULL) + fstab = iis_fs_tab; + + for (fs = 0; fs < ARRAY_SIZE(iis_fs_tab); fs++) { + fsdiv = iis_fs_tab[fs]; + + fsclk = clkrate / fsdiv; + div = fsclk / rate; + + if ((fsclk % rate) > (rate / 2)) + div++; + + if (div <= 1) + continue; + + actual = clkrate / (fsdiv * div); + deviation = actual - rate; + + printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n", + fsdiv, div, actual, deviation); + + deviation = abs(deviation); + + if (deviation < best_deviation) { + best_fs = fsdiv; + best_div = div; + best_rate = actual; + best_deviation = deviation; + } + + if (deviation == 0) + break; + } + + printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n", + best_fs, best_div, best_rate); + + info->fs_div = best_fs; + info->clk_div = best_div; + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate); + +int s3c_i2sv2_probe(struct snd_soc_dai *dai, + struct s3c_i2sv2_info *i2s, + unsigned long base) +{ + struct device *dev = dai->dev; + unsigned int iismod; + + i2s->dev = dev; + + /* record our i2s structure for later use in the callbacks */ + snd_soc_dai_set_drvdata(dai, i2s); + + i2s->regs = ioremap(base, 0x100); + if (i2s->regs == NULL) { + dev_err(dev, "cannot ioremap registers\n"); + return -ENXIO; + } + + i2s->iis_pclk = clk_get(dev, "iis"); + if (IS_ERR(i2s->iis_pclk)) { + dev_err(dev, "failed to get iis_clock\n"); + iounmap(i2s->regs); + return -ENOENT; + } + + clk_enable(i2s->iis_pclk); + + /* Mark ourselves as in TXRX mode so we can run through our cleanup + * process without warnings. */ + iismod = readl(i2s->regs + S3C2412_IISMOD); + iismod |= S3C2412_IISMOD_MODE_TXRX; + writel(iismod, i2s->regs + S3C2412_IISMOD); + s3c2412_snd_txctrl(i2s, 0); + s3c2412_snd_rxctrl(i2s, 0); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_i2sv2_probe); + +#ifdef CONFIG_PM +static int s3c2412_i2s_suspend(struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + u32 iismod; + + if (dai->active) { + i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD); + i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON); + i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR); + + /* some basic suspend checks */ + + iismod = readl(i2s->regs + S3C2412_IISMOD); + + if (iismod & S3C2412_IISCON_RXDMA_ACTIVE) + pr_warning("%s: RXDMA active?\n", __func__); + + if (iismod & S3C2412_IISCON_TXDMA_ACTIVE) + pr_warning("%s: TXDMA active?\n", __func__); + + if (iismod & S3C2412_IISCON_IIS_ACTIVE) + pr_warning("%s: IIS active\n", __func__); + } + + return 0; +} + +static int s3c2412_i2s_resume(struct snd_soc_dai *dai) +{ + struct s3c_i2sv2_info *i2s = to_info(dai); + + pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n", + dai->active, i2s->suspend_iismod, i2s->suspend_iiscon); + + if (dai->active) { + writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON); + writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD); + writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR); + + writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH, + i2s->regs + S3C2412_IISFIC); + + ndelay(250); + writel(0x0, i2s->regs + S3C2412_IISFIC); + } + + return 0; +} +#else +#define s3c2412_i2s_suspend NULL +#define s3c2412_i2s_resume NULL +#endif + +int s3c_i2sv2_register_dai(struct device *dev, int id, + struct snd_soc_dai_driver *drv) +{ + struct snd_soc_dai_ops *ops = drv->ops; + + ops->trigger = s3c2412_i2s_trigger; + if (!ops->hw_params) + ops->hw_params = s3c_i2sv2_hw_params; + ops->set_fmt = s3c2412_i2s_set_fmt; + ops->set_clkdiv = s3c2412_i2s_set_clkdiv; + ops->set_sysclk = s3c_i2sv2_set_sysclk; + + /* Allow overriding by (for example) IISv4 */ + if (!ops->delay) + ops->delay = s3c2412_i2s_delay; + + drv->suspend = s3c2412_i2s_suspend; + drv->resume = s3c2412_i2s_resume; + + return snd_soc_register_dai(dev, drv); +} +EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai); + +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/s3c-i2s-v2.h b/sound/soc/samsung/s3c-i2s-v2.h new file mode 100644 index 0000000..f8297d9 --- /dev/null +++ b/sound/soc/samsung/s3c-i2s-v2.h @@ -0,0 +1,106 @@ +/* sound/soc/samsung/s3c-i2s-v2.h + * + * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver + * + * Copyright (c) 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben(a)simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. +*/ + +/* This code is the core support for the I2S block found in a number of + * Samsung SoC devices which is unofficially named I2S-V2. Currently the + * S3C2412 and the S3C64XX series use this block to provide 1 or 2 I2S + * channels via configurable GPIO. + */ + +#ifndef __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H +#define __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H __FILE__ + +#define S3C_I2SV2_DIV_BCLK (1) +#define S3C_I2SV2_DIV_RCLK (2) +#define S3C_I2SV2_DIV_PRESCALER (3) + +#define S3C_I2SV2_CLKSRC_PCLK 0 +#define S3C_I2SV2_CLKSRC_AUDIOBUS 1 +#define S3C_I2SV2_CLKSRC_CDCLK 2 + +/* Set this flag for I2S controllers that have the bit IISMOD[12] + * bridge/break RCLK signal and external Xi2sCDCLK pin. + */ +#define S3C_FEATURE_CDCLKCON (1 << 0) + +/** + * struct s3c_i2sv2_info - S3C I2S-V2 information + * @dev: The parent device passed to use from the probe. + * @regs: The pointer to the device registe block. + * @feature: Set of bit-flags indicating features of the controller. + * @master: True if the I2S core is the I2S bit clock master. + * @dma_playback: DMA information for playback channel. + * @dma_capture: DMA information for capture channel. + * @suspend_iismod: PM save for the IISMOD register. + * @suspend_iiscon: PM save for the IISCON register. + * @suspend_iispsr: PM save for the IISPSR register. + * + * This is the private codec state for the hardware associated with an + * I2S channel such as the register mappings and clock sources. + */ +struct s3c_i2sv2_info { + struct device *dev; + void __iomem *regs; + + u32 feature; + + struct clk *iis_pclk; + struct clk *iis_cclk; + + unsigned char master; + + struct s3c_dma_params *dma_playback; + struct s3c_dma_params *dma_capture; + + u32 suspend_iismod; + u32 suspend_iiscon; + u32 suspend_iispsr; + + unsigned long base; +}; + +extern struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai); + +struct s3c_i2sv2_rate_calc { + unsigned int clk_div; /* for prescaler */ + unsigned int fs_div; /* for root frame clock */ +}; + +extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info, + unsigned int *fstab, + unsigned int rate, struct clk *clk); + +/** + * s3c_i2sv2_probe - probe for i2s device helper + * @dai: The ASoC DAI structure supplied to the original probe. + * @i2s: Our local i2s structure to fill in. + * @base: The base address for the registers. + */ +extern int s3c_i2sv2_probe(struct snd_soc_dai *dai, + struct s3c_i2sv2_info *i2s, + unsigned long base); + +/** + * s3c_i2sv2_register_dai - register dai with soc core + * @dev: DAI device + * @id: DAI ID + * @drv: The driver structure to register + * + * Fill in any missing fields and then register the given dai with the + * soc core. + */ +extern int s3c_i2sv2_register_dai(struct device *dev, int id, + struct snd_soc_dai_driver *drv); + +#endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */ diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c new file mode 100644 index 0000000..7ea8378 --- /dev/null +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -0,0 +1,212 @@ +/* sound/soc/samsung/s3c2412-i2s.c + * + * ALSA Soc Audio Layer - S3C2412 I2S driver + * + * Copyright (c) 2006 Wolfson Microelectronics PLC. + * Graeme Gregory graeme.gregory(a)wolfsonmicro.com + * linux(a)wolfsonmicro.com + * + * Copyright (c) 2007, 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben(a)simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/io.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> +#include <mach/hardware.h> + +#include <mach/regs-gpio.h> +#include <mach/dma.h> + +#include "dma.h" +#include "regs-i2s-v2.h" +#include "s3c2412-i2s.h" + +#define S3C2412_I2S_DEBUG 0 + +static struct s3c2410_dma_client s3c2412_dma_client_out = { + .name = "I2S PCM Stereo out" +}; + +static struct s3c2410_dma_client s3c2412_dma_client_in = { + .name = "I2S PCM Stereo in" +}; + +static struct s3c_dma_params s3c2412_i2s_pcm_stereo_out = { + .client = &s3c2412_dma_client_out, + .channel = DMACH_I2S_OUT, + .dma_addr = S3C2410_PA_IIS + S3C2412_IISTXD, + .dma_size = 4, +}; + +static struct s3c_dma_params s3c2412_i2s_pcm_stereo_in = { + .client = &s3c2412_dma_client_in, + .channel = DMACH_I2S_IN, + .dma_addr = S3C2410_PA_IIS + S3C2412_IISRXD, + .dma_size = 4, +}; + +static struct s3c_i2sv2_info s3c2412_i2s; + +static int s3c2412_i2s_probe(struct snd_soc_dai *dai) +{ + int ret; + + pr_debug("Entered %s\n", __func__); + + ret = s3c_i2sv2_probe(dai, &s3c2412_i2s, S3C2410_PA_IIS); + if (ret) + return ret; + + s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in; + s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out; + + s3c2412_i2s.iis_cclk = clk_get(dai->dev, "i2sclk"); + if (s3c2412_i2s.iis_cclk == NULL) { + pr_err("failed to get i2sclk clock\n"); + iounmap(s3c2412_i2s.regs); + return -ENODEV; + } + + /* Set MPLL as the source for IIS CLK */ + + clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll")); + clk_enable(s3c2412_i2s.iis_cclk); + + s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk; + + /* Configure the I2S pins in correct mode */ + s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK); + s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI); + s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO); + + return 0; +} + +static int s3c2412_i2s_remove(struct snd_soc_dai *dai) +{ + clk_disable(s3c2412_i2s.iis_cclk); + clk_put(s3c2412_i2s.iis_cclk); + iounmap(s3c2412_i2s.regs); + + return 0; +} + +static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(cpu_dai); + struct s3c_dma_params *dma_data; + u32 iismod; + + pr_debug("Entered %s\n", __func__); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dma_data = i2s->dma_playback; + else + dma_data = i2s->dma_capture; + + snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); + + iismod = readl(i2s->regs + S3C2412_IISMOD); + pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + iismod |= S3C2412_IISMOD_8BIT; + break; + case SNDRV_PCM_FORMAT_S16_LE: + iismod &= ~S3C2412_IISMOD_8BIT; + break; + } + + writel(iismod, i2s->regs + S3C2412_IISMOD); + pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); + + return 0; +} + +#define S3C2412_I2S_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +static struct snd_soc_dai_ops s3c2412_i2s_dai_ops = { + .hw_params = s3c2412_i2s_hw_params, +}; + +static struct snd_soc_dai_driver s3c2412_i2s_dai = { + .probe = s3c2412_i2s_probe, + .remove = s3c2412_i2s_remove, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C2412_I2S_RATES, + .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, + }, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C2412_I2S_RATES, + .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = &s3c2412_i2s_dai_ops, +}; + +static __devinit int s3c2412_iis_dev_probe(struct platform_device *pdev) +{ + return snd_soc_register_dai(&pdev->dev, &s3c2412_i2s_dai); +} + +static __devexit int s3c2412_iis_dev_remove(struct platform_device *pdev) +{ + snd_soc_unregister_dai(&pdev->dev); + return 0; +} + +static struct platform_driver s3c2412_iis_driver = { + .probe = s3c2412_iis_dev_probe, + .remove = s3c2412_iis_dev_remove, + .driver = { + .name = "s3c2412-iis", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c2412_i2s_init(void) +{ + return platform_driver_register(&s3c2412_iis_driver); +} +module_init(s3c2412_i2s_init); + +static void __exit s3c2412_i2s_exit(void) +{ + platform_driver_unregister(&s3c2412_iis_driver); +} +module_exit(s3c2412_i2s_exit); + +/* Module information */ +MODULE_AUTHOR("Ben Dooks, <ben(a)simtec.co.uk>"); +MODULE_DESCRIPTION("S3C2412 I2S SoC Interface"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c2412-iis"); diff --git a/sound/soc/samsung/s3c2412-i2s.h b/sound/soc/samsung/s3c2412-i2s.h new file mode 100644 index 0000000..02ad579 --- /dev/null +++ b/sound/soc/samsung/s3c2412-i2s.h @@ -0,0 +1,27 @@ +/* sound/soc/samsung/s3c2412-i2s.c + * + * ALSA Soc Audio Layer - S3C2412 I2S driver + * + * Copyright (c) 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben(a)simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. +*/ + +#ifndef __SND_SOC_S3C24XX_S3C2412_I2S_H +#define __SND_SOC_S3C24XX_S3C2412_I2S_H __FILE__ + +#include "s3c-i2s-v2.h" + +#define S3C2412_DIV_BCLK S3C_I2SV2_DIV_BCLK +#define S3C2412_DIV_RCLK S3C_I2SV2_DIV_RCLK +#define S3C2412_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER + +#define S3C2412_CLKSRC_PCLK S3C_I2SV2_CLKSRC_PCLK +#define S3C2412_CLKSRC_I2SCLK S3C_I2SV2_CLKSRC_AUDIOBUS + +#endif /* __SND_SOC_S3C24XX_S3C2412_I2S_H */ diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c new file mode 100644 index 0000000..13e41ed --- /dev/null +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -0,0 +1,519 @@ +/* + * s3c24xx-i2s.c -- ALSA Soc Audio Layer + * + * (c) 2006 Wolfson Microelectronics PLC. + * Graeme Gregory graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * Copyright 2004-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben(a)simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/jiffies.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> + +#include <asm/dma.h> +#include <mach/dma.h> + +#include <plat/regs-iis.h> + +#include "dma.h" +#include "s3c24xx-i2s.h" + +static struct s3c2410_dma_client s3c24xx_dma_client_out = { + .name = "I2S PCM Stereo out" +}; + +static struct s3c2410_dma_client s3c24xx_dma_client_in = { + .name = "I2S PCM Stereo in" +}; + +static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = { + .client = &s3c24xx_dma_client_out, + .channel = DMACH_I2S_OUT, + .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO, + .dma_size = 2, +}; + +static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = { + .client = &s3c24xx_dma_client_in, + .channel = DMACH_I2S_IN, + .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO, + .dma_size = 2, +}; + +struct s3c24xx_i2s_info { + void __iomem *regs; + struct clk *iis_clk; + u32 iiscon; + u32 iismod; + u32 iisfcon; + u32 iispsr; +}; +static struct s3c24xx_i2s_info s3c24xx_i2s; + +static void s3c24xx_snd_txctrl(int on) +{ + u32 iisfcon; + u32 iiscon; + u32 iismod; + + pr_debug("Entered %s\n", __func__); + + iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); + iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); + iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); + + pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); + + if (on) { + iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE; + iiscon |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN; + iiscon &= ~S3C2410_IISCON_TXIDLE; + iismod |= S3C2410_IISMOD_TXMODE; + + writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); + writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); + } else { + /* note, we have to disable the FIFOs otherwise bad things + * seem to happen when the DMA stops. According to the + * Samsung supplied kernel, this should allow the DMA + * engine and FIFOs to reset. If this isn't allowed, the + * DMA engine will simply freeze randomly. + */ + + iisfcon &= ~S3C2410_IISFCON_TXENABLE; + iisfcon &= ~S3C2410_IISFCON_TXDMA; + iiscon |= S3C2410_IISCON_TXIDLE; + iiscon &= ~S3C2410_IISCON_TXDMAEN; + iismod &= ~S3C2410_IISMOD_TXMODE; + + writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); + writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); + writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + } + + pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); +} + +static void s3c24xx_snd_rxctrl(int on) +{ + u32 iisfcon; + u32 iiscon; + u32 iismod; + + pr_debug("Entered %s\n", __func__); + + iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); + iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); + iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); + + pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); + + if (on) { + iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE; + iiscon |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN; + iiscon &= ~S3C2410_IISCON_RXIDLE; + iismod |= S3C2410_IISMOD_RXMODE; + + writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); + writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); + } else { + /* note, we have to disable the FIFOs otherwise bad things + * seem to happen when the DMA stops. According to the + * Samsung supplied kernel, this should allow the DMA + * engine and FIFOs to reset. If this isn't allowed, the + * DMA engine will simply freeze randomly. + */ + + iisfcon &= ~S3C2410_IISFCON_RXENABLE; + iisfcon &= ~S3C2410_IISFCON_RXDMA; + iiscon |= S3C2410_IISCON_RXIDLE; + iiscon &= ~S3C2410_IISCON_RXDMAEN; + iismod &= ~S3C2410_IISMOD_RXMODE; + + writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); + writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); + writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + } + + pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); +} + +/* + * Wait for the LR signal to allow synchronisation to the L/R clock + * from the codec. May only be needed for slave mode. + */ +static int s3c24xx_snd_lrsync(void) +{ + u32 iiscon; + int timeout = 50; /* 5ms */ + + pr_debug("Entered %s\n", __func__); + + while (1) { + iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); + if (iiscon & S3C2410_IISCON_LRINDEX) + break; + + if (!timeout--) + return -ETIMEDOUT; + udelay(100); + } + + return 0; +} + +/* + * Check whether CPU is the master or slave + */ +static inline int s3c24xx_snd_is_clkmaster(void) +{ + pr_debug("Entered %s\n", __func__); + + return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1; +} + +/* + * Set S3C24xx I2S DAI format + */ +static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + u32 iismod; + + pr_debug("Entered %s\n", __func__); + + iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); + pr_debug("hw_params r: IISMOD: %x \n", iismod); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iismod |= S3C2410_IISMOD_SLAVE; + break; + case SND_SOC_DAIFMT_CBS_CFS: + iismod &= ~S3C2410_IISMOD_SLAVE; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_LEFT_J: + iismod |= S3C2410_IISMOD_MSB; + break; + case SND_SOC_DAIFMT_I2S: + iismod &= ~S3C2410_IISMOD_MSB; + break; + default: + return -EINVAL; + } + + writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + pr_debug("hw_params w: IISMOD: %x \n", iismod); + return 0; +} + +static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct s3c_dma_params *dma_data; + u32 iismod; + + pr_debug("Entered %s\n", __func__); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dma_data = &s3c24xx_i2s_pcm_stereo_out; + else + dma_data = &s3c24xx_i2s_pcm_stereo_in; + + snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); + + /* Working copies of register */ + iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); + pr_debug("hw_params r: IISMOD: %x\n", iismod); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + iismod &= ~S3C2410_IISMOD_16BIT; + dma_data->dma_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + iismod |= S3C2410_IISMOD_16BIT; + dma_data->dma_size = 2; + break; + default: + return -EINVAL; + } + + writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + pr_debug("hw_params w: IISMOD: %x\n", iismod); + return 0; +} + +static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + int ret = 0; + struct s3c_dma_params *dma_data = + snd_soc_dai_get_dma_data(dai, substream); + + pr_debug("Entered %s\n", __func__); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (!s3c24xx_snd_is_clkmaster()) { + ret = s3c24xx_snd_lrsync(); + if (ret) + goto exit_err; + } + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + s3c24xx_snd_rxctrl(1); + else + s3c24xx_snd_txctrl(1); + + s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) + s3c24xx_snd_rxctrl(0); + else + s3c24xx_snd_txctrl(0); + break; + default: + ret = -EINVAL; + break; + } + +exit_err: + return ret; +} + +/* + * Set S3C24xx Clock source + */ +static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); + + pr_debug("Entered %s\n", __func__); + + iismod &= ~S3C2440_IISMOD_MPLL; + + switch (clk_id) { + case S3C24XX_CLKSRC_PCLK: + break; + case S3C24XX_CLKSRC_MPLL: + iismod |= S3C2440_IISMOD_MPLL; + break; + default: + return -EINVAL; + } + + writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + return 0; +} + +/* + * Set S3C24xx Clock dividers + */ +static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + u32 reg; + + pr_debug("Entered %s\n", __func__); + + switch (div_id) { + case S3C24XX_DIV_BCLK: + reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK; + writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD); + break; + case S3C24XX_DIV_MCLK: + reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS); + writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD); + break; + case S3C24XX_DIV_PRESCALER: + writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR); + reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON); + writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON); + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * To avoid duplicating clock code, allow machine driver to + * get the clockrate from here. + */ +u32 s3c24xx_i2s_get_clockrate(void) +{ + return clk_get_rate(s3c24xx_i2s.iis_clk); +} +EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate); + +static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) +{ + pr_debug("Entered %s\n", __func__); + + s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100); + if (s3c24xx_i2s.regs == NULL) + return -ENXIO; + + s3c24xx_i2s.iis_clk = clk_get(dai->dev, "iis"); + if (s3c24xx_i2s.iis_clk == NULL) { + pr_err("failed to get iis_clock\n"); + iounmap(s3c24xx_i2s.regs); + return -ENODEV; + } + clk_enable(s3c24xx_i2s.iis_clk); + + /* Configure the I2S pins in correct mode */ + s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK); + s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI); + s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO); + + writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON); + + s3c24xx_snd_txctrl(0); + s3c24xx_snd_rxctrl(0); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai) +{ + pr_debug("Entered %s\n", __func__); + + s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); + s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); + s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); + s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR); + + clk_disable(s3c24xx_i2s.iis_clk); + + return 0; +} + +static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai) +{ + pr_debug("Entered %s\n", __func__); + clk_enable(s3c24xx_i2s.iis_clk); + + writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); + writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); + writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); + writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR); + + return 0; +} +#else +#define s3c24xx_i2s_suspend NULL +#define s3c24xx_i2s_resume NULL +#endif + + +#define S3C24XX_I2S_RATES \ + (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +static struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = { + .trigger = s3c24xx_i2s_trigger, + .hw_params = s3c24xx_i2s_hw_params, + .set_fmt = s3c24xx_i2s_set_fmt, + .set_clkdiv = s3c24xx_i2s_set_clkdiv, + .set_sysclk = s3c24xx_i2s_set_sysclk, +}; + +static struct snd_soc_dai_driver s3c24xx_i2s_dai = { + .probe = s3c24xx_i2s_probe, + .suspend = s3c24xx_i2s_suspend, + .resume = s3c24xx_i2s_resume, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C24XX_I2S_RATES, + .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = S3C24XX_I2S_RATES, + .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = &s3c24xx_i2s_dai_ops, +}; + +static __devinit int s3c24xx_iis_dev_probe(struct platform_device *pdev) +{ + return snd_soc_register_dai(&pdev->dev, &s3c24xx_i2s_dai); +} + +static __devexit int s3c24xx_iis_dev_remove(struct platform_device *pdev) +{ + snd_soc_unregister_dai(&pdev->dev); + return 0; +} + +static struct platform_driver s3c24xx_iis_driver = { + .probe = s3c24xx_iis_dev_probe, + .remove = s3c24xx_iis_dev_remove, + .driver = { + .name = "s3c24xx-iis", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c24xx_i2s_init(void) +{ + return platform_driver_register(&s3c24xx_iis_driver); +} +module_init(s3c24xx_i2s_init); + +static void __exit s3c24xx_i2s_exit(void) +{ + platform_driver_unregister(&s3c24xx_iis_driver); +} +module_exit(s3c24xx_i2s_exit); + +/* Module information */ +MODULE_AUTHOR("Ben Dooks, <ben(a)simtec.co.uk>"); +MODULE_DESCRIPTION("s3c24xx I2S SoC Interface"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c24xx-iis"); diff --git a/sound/soc/samsung/s3c24xx-i2s.h b/sound/soc/samsung/s3c24xx-i2s.h new file mode 100644 index 0000000..f9ca04e --- /dev/null +++ b/sound/soc/samsung/s3c24xx-i2s.h @@ -0,0 +1,35 @@ +/* + * s3c24xx-i2s.c -- ALSA Soc Audio Layer + * + * Copyright 2005 Wolfson Microelectronics PLC. + * Author: Graeme Gregory + * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Revision history + * 10th Nov 2006 Initial version. + */ + +#ifndef S3C24XXI2S_H_ +#define S3C24XXI2S_H_ + +/* clock sources */ +#define S3C24XX_CLKSRC_PCLK 0 +#define S3C24XX_CLKSRC_MPLL 1 + +/* Clock dividers */ +#define S3C24XX_DIV_MCLK 0 +#define S3C24XX_DIV_BCLK 1 +#define S3C24XX_DIV_PRESCALER 2 + +/* prescaler */ +#define S3C24XX_PRESCALE(a,b) \ + (((a - 1) << S3C2410_IISPSR_INTSHIFT) | ((b - 1) << S3C2410_IISPSR_EXTSHFIT)) + +u32 s3c24xx_i2s_get_clockrate(void); + +#endif /*S3C24XXI2S_H_*/ diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c new file mode 100644 index 0000000..4a1b002 --- /dev/null +++ b/sound/soc/samsung/s3c24xx_simtec.c @@ -0,0 +1,395 @@ +/* sound/soc/samsung/s3c24xx_simtec.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/clk.h> +#include <linux/i2c.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <plat/audio-simtec.h> + +#include "dma.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +static struct s3c24xx_audio_simtec_pdata *pdata; +static struct clk *xtal_clk; + +static int spk_gain; +static int spk_unmute; + +/** + * speaker_gain_get - read the speaker gain setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be updated. + * + * Read the value for the AMP gain control. + */ +static int speaker_gain_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = spk_gain; + return 0; +} + +/** + * speaker_gain_set - set the value of the speaker amp gain + * @value: The value to write. + */ +static void speaker_gain_set(int value) +{ + gpio_set_value_cansleep(pdata->amp_gain[0], value & 1); + gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1); +} + +/** + * speaker_gain_put - set the speaker gain setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be set. + * + * Set the value of the speaker gain from the specified + * @ucontrol setting. + * + * Note, if the speaker amp is muted, then we do not set a gain value + * as at-least one of the ICs that is fitted will try and power up even + * if the main control is set to off. + */ +static int speaker_gain_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int value = ucontrol->value.integer.value[0]; + + spk_gain = value; + + if (!spk_unmute) + speaker_gain_set(value); + + return 0; +} + +static const struct snd_kcontrol_new amp_gain_controls[] = { + SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0, + speaker_gain_get, speaker_gain_put), +}; + +/** + * spk_unmute_state - set the unmute state of the speaker + * @to: zero to unmute, non-zero to ununmute. + */ +static void spk_unmute_state(int to) +{ + pr_debug("%s: to=%d\n", __func__, to); + + spk_unmute = to; + gpio_set_value(pdata->amp_gpio, to); + + /* if we're umuting, also re-set the gain */ + if (to && pdata->amp_gain[0] > 0) + speaker_gain_set(spk_gain); +} + +/** + * speaker_unmute_get - read the speaker unmute setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be updated. + * + * Read the value for the AMP gain control. + */ +static int speaker_unmute_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = spk_unmute; + return 0; +} + +/** + * speaker_unmute_put - set the speaker unmute setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be set. + * + * Set the value of the speaker gain from the specified + * @ucontrol setting. + */ +static int speaker_unmute_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + spk_unmute_state(ucontrol->value.integer.value[0]); + return 0; +} + +/* This is added as a manual control as the speaker amps create clicks + * when their power state is changed, which are far more noticeable than + * anything produced by the CODEC itself. + */ +static const struct snd_kcontrol_new amp_unmute_controls[] = { + SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0, + speaker_unmute_get, speaker_unmute_put), +}; + +void simtec_audio_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + + if (pdata->amp_gpio > 0) { + pr_debug("%s: adding amp routes\n", __func__); + + snd_soc_add_controls(codec, amp_unmute_controls, + ARRAY_SIZE(amp_unmute_controls)); + } + + if (pdata->amp_gain[0] > 0) { + pr_debug("%s: adding amp controls\n", __func__); + snd_soc_add_controls(codec, amp_gain_controls, + ARRAY_SIZE(amp_gain_controls)); + } +} +EXPORT_SYMBOL_GPL(simtec_audio_init); + +#define CODEC_CLOCK 12000000 + +/** + * simtec_hw_params - update hardware parameters + * @substream: The audio substream instance. + * @params: The parameters requested. + * + * Update the codec data routing and configuration settings + * from the supplied data. + */ +static int simtec_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int ret; + + /* Set the CODEC as the bus clock master, I2S */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret) { + pr_err("%s: failed set cpu dai format\n", __func__); + return ret; + } + + /* Set the CODEC as the bus clock master */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret) { + pr_err("%s: failed set codec dai format\n", __func__); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, + CODEC_CLOCK, SND_SOC_CLOCK_IN); + if (ret) { + pr_err( "%s: failed setting codec sysclk\n", __func__); + return ret; + } + + if (pdata->use_mpllin) { + ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL, + 0, SND_SOC_CLOCK_OUT); + + if (ret) { + pr_err("%s: failed to set MPLLin as clksrc\n", + __func__); + return ret; + } + } + + if (pdata->output_cdclk) { + int cdclk_scale; + + cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK; + cdclk_scale--; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + cdclk_scale); + } + + return 0; +} + +static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd) +{ + /* call any board supplied startup code, this currently only + * covers the bast/vr1000 which have a CPLD in the way of the + * LRCLK */ + if (pd->startup) + pd->startup(); + + return 0; +} + +static struct snd_soc_ops simtec_snd_ops = { + .hw_params = simtec_hw_params, +}; + +/** + * attach_gpio_amp - get and configure the necessary gpios + * @dev: The device we're probing. + * @pd: The platform data supplied by the board. + * + * If there is a GPIO based amplifier attached to the board, claim + * the necessary GPIO lines for it, and set default values. + */ +static int attach_gpio_amp(struct device *dev, + struct s3c24xx_audio_simtec_pdata *pd) +{ + int ret; + + /* attach gpio amp gain (if any) */ + if (pdata->amp_gain[0] > 0) { + ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0"); + if (ret) { + dev_err(dev, "cannot get amp gpio gain0\n"); + return ret; + } + + ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1"); + if (ret) { + dev_err(dev, "cannot get amp gpio gain1\n"); + gpio_free(pdata->amp_gain[0]); + return ret; + } + + gpio_direction_output(pd->amp_gain[0], 0); + gpio_direction_output(pd->amp_gain[1], 0); + } + + /* note, currently we assume GPA0 isn't valid amp */ + if (pdata->amp_gpio > 0) { + ret = gpio_request(pd->amp_gpio, "gpio-amp"); + if (ret) { + dev_err(dev, "cannot get amp gpio %d (%d)\n", + pd->amp_gpio, ret); + goto err_amp; + } + + /* set the amp off at startup */ + spk_unmute_state(0); + } + + return 0; + +err_amp: + if (pd->amp_gain[0] > 0) { + gpio_free(pd->amp_gain[0]); + gpio_free(pd->amp_gain[1]); + } + + return ret; +} + +static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd) +{ + if (pd->amp_gain[0] > 0) { + gpio_free(pd->amp_gain[0]); + gpio_free(pd->amp_gain[1]); + } + + if (pd->amp_gpio > 0) + gpio_free(pd->amp_gpio); +} + +#ifdef CONFIG_PM +int simtec_audio_resume(struct device *dev) +{ + simtec_call_startup(pdata); + return 0; +} + +const struct dev_pm_ops simtec_audio_pmops = { + .resume = simtec_audio_resume, +}; +EXPORT_SYMBOL_GPL(simtec_audio_pmops); +#endif + +int __devinit simtec_audio_core_probe(struct platform_device *pdev, + struct snd_soc_card *card) +{ + struct platform_device *snd_dev; + int ret; + + card->dai_link->ops = &simtec_snd_ops; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data supplied\n"); + return -EINVAL; + } + + simtec_call_startup(pdata); + + xtal_clk = clk_get(&pdev->dev, "xtal"); + if (IS_ERR(xtal_clk)) { + dev_err(&pdev->dev, "could not get clkout0\n"); + return -EINVAL; + } + + dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk)); + + ret = attach_gpio_amp(&pdev->dev, pdata); + if (ret) + goto err_clk; + + snd_dev = platform_device_alloc("soc-audio", -1); + if (!snd_dev) { + dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n"); + ret = -ENOMEM; + goto err_gpio; + } + + platform_set_drvdata(snd_dev, card); + + ret = platform_device_add(snd_dev); + if (ret) { + dev_err(&pdev->dev, "failed to add soc-audio dev\n"); + goto err_pdev; + } + + platform_set_drvdata(pdev, snd_dev); + return 0; + +err_pdev: + platform_device_put(snd_dev); + +err_gpio: + detach_gpio_amp(pdata); + +err_clk: + clk_put(xtal_clk); + return ret; +} +EXPORT_SYMBOL_GPL(simtec_audio_core_probe); + +int __devexit simtec_audio_remove(struct platform_device *pdev) +{ + struct platform_device *snd_dev = platform_get_drvdata(pdev); + + platform_device_unregister(snd_dev); + + detach_gpio_amp(pdata); + clk_put(xtal_clk); + return 0; +} +EXPORT_SYMBOL_GPL(simtec_audio_remove); + +MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/s3c24xx_simtec.h b/sound/soc/samsung/s3c24xx_simtec.h new file mode 100644 index 0000000..8270748 --- /dev/null +++ b/sound/soc/samsung/s3c24xx_simtec.h @@ -0,0 +1,22 @@ +/* sound/soc/samsung/s3c24xx_simtec.h + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void simtec_audio_init(struct snd_soc_pcm_runtime *rtd); + +extern int simtec_audio_core_probe(struct platform_device *pdev, + struct snd_soc_card *card); + +extern int simtec_audio_remove(struct platform_device *pdev); + +#ifdef CONFIG_PM +extern const struct dev_pm_ops simtec_audio_pmops; +#define simtec_audio_pm &simtec_audio_pmops +#else +#define simtec_audio_pm NULL +#endif diff --git a/sound/soc/samsung/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c new file mode 100644 index 0000000..fec4cac --- /dev/null +++ b/sound/soc/samsung/s3c24xx_simtec_hermes.c @@ -0,0 +1,146 @@ +/* sound/soc/samsung/s3c24xx_simtec_hermes.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <plat/audio-simtec.h> + +#include "dma.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +#include "../codecs/tlv320aic3x.h" + +static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_LINE("GSM Out", NULL), + SND_SOC_DAPM_LINE("GSM In", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), + SND_SOC_DAPM_LINE("ZV", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_HP("Headphone Jack", NULL), +}; + +static const struct snd_soc_dapm_route base_map[] = { + /* Headphone connected to HP{L,R}OUT and HP{L,R}COM */ + + { "Headphone Jack", NULL, "HPLOUT" }, + { "Headphone Jack", NULL, "HPLCOM" }, + { "Headphone Jack", NULL, "HPROUT" }, + { "Headphone Jack", NULL, "HPRCOM" }, + + /* ZV connected to Line1 */ + + { "LINE1L", NULL, "ZV" }, + { "LINE1R", NULL, "ZV" }, + + /* Line In connected to Line2 */ + + { "LINE2L", NULL, "Line In" }, + { "LINE2R", NULL, "Line In" }, + + /* Microphone connected to MIC3R and MIC_BIAS */ + + { "MIC3L", NULL, "Mic Jack" }, + + /* GSM connected to MONO_LOUT and MIC3L (in) */ + + { "GSM Out", NULL, "MONO_LOUT" }, + { "MIC3L", NULL, "GSM In" }, + + /* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are + * not using the DAPM to power it up and down as there it makes + * a click when powering up. */ +}; + +/** + * simtec_hermes_init - initialise and add controls + * @codec; The codec instance to attach to. + * + * Attach our controls and configure the necessary codec + * mappings for our sound card instance. +*/ +static int simtec_hermes_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + + snd_soc_dapm_new_controls(codec, dapm_widgets, + ARRAY_SIZE(dapm_widgets)); + + snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map)); + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Line In"); + snd_soc_dapm_enable_pin(codec, "Line Out"); + snd_soc_dapm_enable_pin(codec, "Mic Jack"); + + simtec_audio_init(rtd); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link simtec_dai_aic33 = { + .name = "tlv320aic33", + .stream_name = "TLV320AIC33", + .codec_name = "tlv320aic3x-codec.0-0x1a", + .cpu_dai_name = "s3c24xx-i2s", + .codec_dai_name = "tlv320aic3x-hifi", + .platform_name = "samsung-audio", + .init = simtec_hermes_init, +}; + +/* simtec audio machine driver */ +static struct snd_soc_card snd_soc_machine_simtec_aic33 = { + .name = "Simtec-Hermes", + .dai_link = &simtec_dai_aic33, + .num_links = 1, +}; + +static int __devinit simtec_audio_hermes_probe(struct platform_device *pd) +{ + dev_info(&pd->dev, "probing....\n"); + return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic33); +} + +static struct platform_driver simtec_audio_hermes_platdrv = { + .driver = { + .owner = THIS_MODULE, + .name = "s3c24xx-simtec-hermes-snd", + .pm = simtec_audio_pm, + }, + .probe = simtec_audio_hermes_probe, + .remove = __devexit_p(simtec_audio_remove), +}; + +MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd"); + +static int __init simtec_hermes_modinit(void) +{ + return platform_driver_register(&simtec_audio_hermes_platdrv); +} + +static void __exit simtec_hermes_modexit(void) +{ + platform_driver_unregister(&simtec_audio_hermes_platdrv); +} + +module_init(simtec_hermes_modinit); +module_exit(simtec_hermes_modexit); + +MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio support"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c new file mode 100644 index 0000000..7915e02 --- /dev/null +++ b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c @@ -0,0 +1,134 @@ +/* sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <plat/audio-simtec.h> + +#include "dma.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +#include "../codecs/tlv320aic23.h" + +/* supported machines: + * + * Machine Connections AMP + * ------- ----------- --- + * BAST MIC, HPOUT, LOUT, LIN TPA2001D1 (HPOUTL,R) (gain hardwired) + * VR1000 HPOUT, LIN None + * VR2000 LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) + * DePicture LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) + * Anubis LIN, LOUT, MIC, HP TPA2001D1 (HPOUTL,R) + */ + +static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), +}; + +static const struct snd_soc_dapm_route base_map[] = { + { "Headphone Jack", NULL, "LHPOUT"}, + { "Headphone Jack", NULL, "RHPOUT"}, + + { "Line Out", NULL, "LOUT" }, + { "Line Out", NULL, "ROUT" }, + + { "LLINEIN", NULL, "Line In"}, + { "RLINEIN", NULL, "Line In"}, + + { "MICIN", NULL, "Mic Jack"}, +}; + +/** + * simtec_tlv320aic23_init - initialise and add controls + * @codec; The codec instance to attach to. + * + * Attach our controls and configure the necessary codec + * mappings for our sound card instance. +*/ +static int simtec_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + + snd_soc_dapm_new_controls(codec, dapm_widgets, + ARRAY_SIZE(dapm_widgets)); + + snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map)); + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Line In"); + snd_soc_dapm_enable_pin(codec, "Line Out"); + snd_soc_dapm_enable_pin(codec, "Mic Jack"); + + simtec_audio_init(rtd); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link simtec_dai_aic23 = { + .name = "tlv320aic23", + .stream_name = "TLV320AIC23", + .codec_name = "tlv320aic3x-codec.0-0x1a", + .cpu_dai_name = "s3c24xx-i2s", + .codec_dai_name = "tlv320aic3x-hifi", + .platform_name = "samsung-audio", + .init = simtec_tlv320aic23_init, +}; + +/* simtec audio machine driver */ +static struct snd_soc_card snd_soc_machine_simtec_aic23 = { + .name = "Simtec", + .dai_link = &simtec_dai_aic23, + .num_links = 1, +}; + +static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd) +{ + return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic23); +} + +static struct platform_driver simtec_audio_tlv320aic23_platdrv = { + .driver = { + .owner = THIS_MODULE, + .name = "s3c24xx-simtec-tlv320aic23", + .pm = simtec_audio_pm, + }, + .probe = simtec_audio_tlv320aic23_probe, + .remove = __devexit_p(simtec_audio_remove), +}; + +MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23"); + +static int __init simtec_tlv320aic23_modinit(void) +{ + return platform_driver_register(&simtec_audio_tlv320aic23_platdrv); +} + +static void __exit simtec_tlv320aic23_modexit(void) +{ + platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv); +} + +module_init(simtec_tlv320aic23_modinit); +module_exit(simtec_tlv320aic23_modexit); + +MODULE_AUTHOR("Ben Dooks <ben(a)simtec.co.uk>"); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio support"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c new file mode 100644 index 0000000..87eeb46 --- /dev/null +++ b/sound/soc/samsung/s3c24xx_uda134x.c @@ -0,0 +1,368 @@ +/* + * Modifications by Christian Pellegrin <chripell(a)evolware.org> + * + * s3c24xx_uda134x.c -- S3C24XX_UDA134X ALSA SoC Audio board driver + * + * Copyright 2007 Dension Audio Systems Ltd. + * Author: Zoltan Devai + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/s3c24xx_uda134x.h> +#include <sound/uda134x.h> + +#include <plat/regs-iis.h> + +#include "dma.h" +#include "s3c24xx-i2s.h" +#include "../codecs/uda134x.h" + + +/* #define ENFORCE_RATES 1 */ +/* + Unfortunately the S3C24XX in master mode has a limited capacity of + generating the clock for the codec. If you define this only rates + that are really available will be enforced. But be careful, most + user level application just want the usual sampling frequencies (8, + 11.025, 22.050, 44.1 kHz) and anyway resampling is a costly + operation for embedded systems. So if you aren't very lucky or your + hardware engineer wasn't very forward-looking it's better to leave + this undefined. If you do so an approximate value for the requested + sampling rate in the range -/+ 5% will be chosen. If this in not + possible an error will be returned. +*/ + +static struct clk *xtal; +static struct clk *pclk; +/* this is need because we don't have a place where to keep the + * pointers to the clocks in each substream. We get the clocks only + * when we are actually using them so we don't block stuff like + * frequency change or oscillator power-off */ +static int clk_users; +static DEFINE_MUTEX(clk_lock); + +static unsigned int rates[33 * 2]; +#ifdef ENFORCE_RATES +static struct snd_pcm_hw_constraint_list hw_constraints_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0, +}; +#endif + +static struct platform_device *s3c24xx_uda134x_snd_device; + +static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) +{ + int ret = 0; +#ifdef ENFORCE_RATES + struct snd_pcm_runtime *runtime = substream->runtime; +#endif + + mutex_lock(&clk_lock); + pr_debug("%s %d\n", __func__, clk_users); + if (clk_users == 0) { + xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal"); + if (!xtal) { + printk(KERN_ERR "%s cannot get xtal\n", __func__); + ret = -EBUSY; + } else { + pclk = clk_get(&s3c24xx_uda134x_snd_device->dev, + "pclk"); + if (!pclk) { + printk(KERN_ERR "%s cannot get pclk\n", + __func__); + clk_put(xtal); + ret = -EBUSY; + } + } + if (!ret) { + int i, j; + + for (i = 0; i < 2; i++) { + int fs = i ? 256 : 384; + + rates[i*33] = clk_get_rate(xtal) / fs; + for (j = 1; j < 33; j++) + rates[i*33 + j] = clk_get_rate(pclk) / + (j * fs); + } + } + } + clk_users += 1; + mutex_unlock(&clk_lock); + if (!ret) { +#ifdef ENFORCE_RATES + ret = snd_pcm_hw_constraint_list(runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &hw_constraints_rates); + if (ret < 0) + printk(KERN_ERR "%s cannot set constraints\n", + __func__); +#endif + } + return ret; +} + +static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream) +{ + mutex_lock(&clk_lock); + pr_debug("%s %d\n", __func__, clk_users); + clk_users -= 1; + if (clk_users == 0) { + clk_put(xtal); + xtal = NULL; + clk_put(pclk); + pclk = NULL; + } + mutex_unlock(&clk_lock); +} + +static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + unsigned int clk = 0; + int ret = 0; + int clk_source, fs_mode; + unsigned long rate = params_rate(params); + long err, cerr; + unsigned int div; + int i, bi; + + err = 999999; + bi = 0; + for (i = 0; i < 2*33; i++) { + cerr = rates[i] - rate; + if (cerr < 0) + cerr = -cerr; + if (cerr < err) { + err = cerr; + bi = i; + } + } + if (bi / 33 == 1) + fs_mode = S3C2410_IISMOD_256FS; + else + fs_mode = S3C2410_IISMOD_384FS; + if (bi % 33 == 0) { + clk_source = S3C24XX_CLKSRC_MPLL; + div = 1; + } else { + clk_source = S3C24XX_CLKSRC_PCLK; + div = bi % 33; + } + pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi); + + clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate; + pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__, + fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS", + clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK", + div, clk, err); + + if ((err * 100 / rate) > 5) { + printk(KERN_ERR "S3C24XX_UDA134X: effective frequency " + "too different from desired (%ld%%)\n", + err * 100 / rate); + return -EINVAL; + } + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK, + S3C2410_IISMOD_32FS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + S3C24XX_PRESCALE(div, div)); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk, + SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops s3c24xx_uda134x_ops = { + .startup = s3c24xx_uda134x_startup, + .shutdown = s3c24xx_uda134x_shutdown, + .hw_params = s3c24xx_uda134x_hw_params, +}; + +static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = { + .name = "UDA134X", + .stream_name = "UDA134X", + .codec_name = "uda134x-hifi", + .codec_dai_name = "uda134x-hifi", + .cpu_dai_name = "s3c24xx-i2s", + .ops = &s3c24xx_uda134x_ops, + .platform_name = "samsung-audio", +}; + +static struct snd_soc_card snd_soc_s3c24xx_uda134x = { + .name = "S3C24XX_UDA134X", + .dai_link = &s3c24xx_uda134x_dai_link, + .num_links = 1, +}; + +static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins; + +static void setdat(int v) +{ + gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0); +} + +static void setclk(int v) +{ + gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0); +} + +static void setmode(int v) +{ + gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0); +} + +/* FIXME - This must be codec platform data but in which board file ?? */ +static struct uda134x_platform_data s3c24xx_uda134x = { + .l3 = { + .setdat = setdat, + .setclk = setclk, + .setmode = setmode, + .data_hold = 1, + .data_setup = 1, + .clock_high = 1, + .mode_hold = 1, + .mode = 1, + .mode_setup = 1, + }, +}; + +static int s3c24xx_uda134x_setup_pin(int pin, char *fun) +{ + if (gpio_request(pin, "s3c24xx_uda134x") < 0) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " + "l3 %s pin already in use", fun); + return -EBUSY; + } + gpio_direction_output(pin, 0); + return 0; +} + +static int s3c24xx_uda134x_probe(struct platform_device *pdev) +{ + int ret; + + printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n"); + + s3c24xx_uda134x_l3_pins = pdev->dev.platform_data; + if (s3c24xx_uda134x_l3_pins == NULL) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " + "unable to find platform data\n"); + return -ENODEV; + } + s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power; + s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model; + + if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data, + "data") < 0) + return -EBUSY; + if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk, + "clk") < 0) { + gpio_free(s3c24xx_uda134x_l3_pins->l3_data); + return -EBUSY; + } + if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode, + "mode") < 0) { + gpio_free(s3c24xx_uda134x_l3_pins->l3_data); + gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); + return -EBUSY; + } + + s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1); + if (!s3c24xx_uda134x_snd_device) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " + "Unable to register\n"); + return -ENOMEM; + } + + platform_set_drvdata(s3c24xx_uda134x_snd_device, + &snd_soc_s3c24xx_uda134x); + ret = platform_device_add(s3c24xx_uda134x_snd_device); + if (ret) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n"); + platform_device_put(s3c24xx_uda134x_snd_device); + } + + return ret; +} + +static int s3c24xx_uda134x_remove(struct platform_device *pdev) +{ + platform_device_unregister(s3c24xx_uda134x_snd_device); + gpio_free(s3c24xx_uda134x_l3_pins->l3_data); + gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); + gpio_free(s3c24xx_uda134x_l3_pins->l3_mode); + return 0; +} + +static struct platform_driver s3c24xx_uda134x_driver = { + .probe = s3c24xx_uda134x_probe, + .remove = s3c24xx_uda134x_remove, + .driver = { + .name = "s3c24xx_uda134x", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c24xx_uda134x_init(void) +{ + return platform_driver_register(&s3c24xx_uda134x_driver); +} + +static void __exit s3c24xx_uda134x_exit(void) +{ + platform_driver_unregister(&s3c24xx_uda134x_driver); +} + + +module_init(s3c24xx_uda134x_init); +module_exit(s3c24xx_uda134x_exit); + +MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell(a)evolware.org>"); +MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c new file mode 100644 index 0000000..3564e00 --- /dev/null +++ b/sound/soc/samsung/smartq_wm8987.c @@ -0,0 +1,287 @@ +/* sound/soc/samsung/smartq_wm8987.c + * + * Copyright 2010 Maurus Cuelenaere <mcuelenaere(a)gmail.com> + * + * Based on smdk6410_wm8987.c + * Copyright 2007 Wolfson Microelectronics PLC. - linux(a)wolfsonmicro.com + * Graeme Gregory - graeme.gregory(a)wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "dma.h" +#include "i2s.h" + +#include "../codecs/wm8750.h" + +/* + * WM8987 is register compatible with WM8750, so using that as base driver. + */ + +static struct snd_soc_card snd_soc_smartq; + +static int smartq_hifi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int clk = 0; + int ret; + + switch (params_rate(params)) { + case 8000: + case 16000: + case 32000: + case 48000: + case 96000: + clk = 12288000; + break; + case 11025: + case 22050: + case 44100: + case 88200: + clk = 11289600; + break; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* Use PCLK for I2S signal generation */ + ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0, + 0, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* Gate the RCLK output on PAD */ + ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK, + 0, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +/* + * SmartQ WM8987 HiFi DAI operations. + */ +static struct snd_soc_ops smartq_hifi_ops = { + .hw_params = smartq_hifi_hw_params, +}; + +static struct snd_soc_jack smartq_jack; + +static struct snd_soc_jack_pin smartq_jack_pins[] = { + /* Disable speaker when headphone is plugged in */ + { + .pin = "Internal Speaker", + .mask = SND_JACK_HEADPHONE, + }, +}; + +static struct snd_soc_jack_gpio smartq_jack_gpios[] = { + { + .gpio = S3C64XX_GPL(12), + .name = "headphone detect", + .report = SND_JACK_HEADPHONE, + .debounce_time = 200, + }, +}; + +static const struct snd_kcontrol_new wm8987_smartq_controls[] = { + SOC_DAPM_PIN_SWITCH("Internal Speaker"), + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Internal Mic"), +}; + +static int smartq_speaker_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, + int event) +{ + gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event)); + + return 0; +} + +static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event), + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Internal Mic", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "LOUT2"}, + {"Headphone Jack", NULL, "ROUT2"}, + + {"Internal Speaker", NULL, "LOUT2"}, + {"Internal Speaker", NULL, "ROUT2"}, + + {"Mic Bias", NULL, "Internal Mic"}, + {"LINPUT2", NULL, "Mic Bias"}, +}; + +static int smartq_wm8987_init(struct snd_soc_codec *codec) +{ + int err = 0; + + /* Add SmartQ specific widgets */ + snd_soc_dapm_new_controls(codec, wm8987_dapm_widgets, + ARRAY_SIZE(wm8987_dapm_widgets)); + + /* add SmartQ specific controls */ + err = snd_soc_add_controls(codec, wm8987_smartq_controls, + ARRAY_SIZE(wm8987_smartq_controls)); + + if (err < 0) + return err; + + /* setup SmartQ specific audio path */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* set endpoints to not connected */ + snd_soc_dapm_nc_pin(codec, "LINPUT1"); + snd_soc_dapm_nc_pin(codec, "RINPUT1"); + snd_soc_dapm_nc_pin(codec, "OUT3"); + snd_soc_dapm_nc_pin(codec, "ROUT1"); + + /* set endpoints to default off mode */ + snd_soc_dapm_enable_pin(codec, "Internal Speaker"); + snd_soc_dapm_enable_pin(codec, "Internal Mic"); + snd_soc_dapm_disable_pin(codec, "Headphone Jack"); + + err = snd_soc_dapm_sync(codec); + if (err) + return err; + + /* Headphone jack detection */ + err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack", + SND_JACK_HEADPHONE, &smartq_jack); + if (err) + return err; + + err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins), + smartq_jack_pins); + if (err) + return err; + + err = snd_soc_jack_add_gpios(&smartq_jack, + ARRAY_SIZE(smartq_jack_gpios), + smartq_jack_gpios); + + return err; +} + +static struct snd_soc_dai_link smartq_dai[] = { + { + .name = "wm8987", + .stream_name = "SmartQ Hi-Fi", + .cpu_dai_name = "samsung-i2s.0", + .codec_dai_name = "wm8750-hifi", + .platform_name = "samsung-audio", + .codec_name = "wm8750-codec.0-0x1a", + .init = smartq_wm8987_init, + .ops = &smartq_hifi_ops, + }, +}; + +static struct snd_soc_card snd_soc_smartq = { + .name = "SmartQ", + .dai_link = smartq_dai, + .num_links = ARRAY_SIZE(smartq_dai), +}; + +static struct platform_device *smartq_snd_device; + +static int __init smartq_init(void) +{ + int ret; + + if (!machine_is_smartq7() && !machine_is_smartq5()) { + pr_info("Only SmartQ is supported by this ASoC driver\n"); + return -ENODEV; + } + + smartq_snd_device = platform_device_alloc("soc-audio", -1); + if (!smartq_snd_device) + return -ENOMEM; + + platform_set_drvdata(smartq_snd_device, &snd_soc_smartq); + + ret = platform_device_add(smartq_snd_device); + if (ret) { + platform_device_put(smartq_snd_device); + return ret; + } + + /* Initialise GPIOs used by amplifiers */ + ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown"); + if (ret) { + dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n"); + goto err_unregister_device; + } + + /* Disable amplifiers */ + ret = gpio_direction_output(S3C64XX_GPK(12), 1); + if (ret) { + dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n"); + goto err_free_gpio_amp_shut; + } + + return 0; + +err_free_gpio_amp_shut: + gpio_free(S3C64XX_GPK(12)); +err_unregister_device: + platform_device_unregister(smartq_snd_device); + + return ret; +} + +static void __exit smartq_exit(void) +{ + snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios), + smartq_jack_gpios); + + platform_device_unregister(smartq_snd_device); +} + +module_init(smartq_init); +module_exit(smartq_exit); + +/* Module information */ +MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere(a)gmail.com>"); +MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/smdk2443_wm9710.c b/sound/soc/samsung/smdk2443_wm9710.c new file mode 100644 index 0000000..5051699 --- /dev/null +++ b/sound/soc/samsung/smdk2443_wm9710.c @@ -0,0 +1,74 @@ +/* + * smdk2443_wm9710.c -- SoC audio for smdk2443 + * + * Copyright 2007 Wolfson Microelectronics PLC. + * Author: Graeme Gregory + * graeme.gregory(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "dma.h" +#include "ac97.h" + +static struct snd_soc_card smdk2443; + +static struct snd_soc_dai_link smdk2443_dai[] = { +{ + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai_name = "samsung-ac97", + .codec_dai_name = "ac97-hifi", + .codec_name = "ac97-codec", + .platform_name = "samsung-audio", +}, +}; + +static struct snd_soc_card smdk2443 = { + .name = "SMDK2443", + .dai_link = smdk2443_dai, + .num_links = ARRAY_SIZE(smdk2443_dai), +}; + +static struct platform_device *smdk2443_snd_ac97_device; + +static int __init smdk2443_init(void) +{ + int ret; + + smdk2443_snd_ac97_device = platform_device_alloc("soc-audio", -1); + if (!smdk2443_snd_ac97_device) + return -ENOMEM; + + platform_set_drvdata(smdk2443_snd_ac97_device, &smdk2443); + ret = platform_device_add(smdk2443_snd_ac97_device); + + if (ret) + platform_device_put(smdk2443_snd_ac97_device); + + return ret; +} + +static void __exit smdk2443_exit(void) +{ + platform_device_unregister(smdk2443_snd_ac97_device); +} + +module_init(smdk2443_init); +module_exit(smdk2443_exit); + +/* Module information */ +MODULE_AUTHOR("Graeme Gregory, graeme.gregory(a)wolfsonmicro.com, www.wolfsonmicro.com"); +MODULE_DESCRIPTION("ALSA SoC WM9710 SMDK2443"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/smdk_spdif.c b/sound/soc/samsung/smdk_spdif.c new file mode 100644 index 0000000..4fc6a9f --- /dev/null +++ b/sound/soc/samsung/smdk_spdif.c @@ -0,0 +1,223 @@ +/* + * smdk_spdif.c -- S/PDIF audio for SMDK + * + * Copyright 2010 Samsung Electronics Co. Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/clk.h> + +#include <plat/devs.h> + +#include <sound/soc.h> + +#include "dma.h" +#include "spdif.h" + +/* Audio clock settings are belonged to board specific part. Every + * board can set audio source clock setting which is matched with H/W + * like this function-'set_audio_clock_heirachy'. + */ +static int set_audio_clock_heirachy(struct platform_device *pdev) +{ + struct clk *fout_epll, *mout_epll, *sclk_audio0, *sclk_spdif; + int ret; + + fout_epll = clk_get(NULL, "fout_epll"); + if (IS_ERR(fout_epll)) { + printk(KERN_WARNING "%s: Cannot find fout_epll.\n", + __func__); + return -EINVAL; + } + + mout_epll = clk_get(NULL, "mout_epll"); + if (IS_ERR(fout_epll)) { + printk(KERN_WARNING "%s: Cannot find mout_epll.\n", + __func__); + ret = -EINVAL; + goto out1; + } + + sclk_audio0 = clk_get(&pdev->dev, "sclk_audio"); + if (IS_ERR(sclk_audio0)) { + printk(KERN_WARNING "%s: Cannot find sclk_audio.\n", + __func__); + ret = -EINVAL; + goto out2; + } + + sclk_spdif = clk_get(NULL, "sclk_spdif"); + if (IS_ERR(fout_epll)) { + printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n", + __func__); + ret = -EINVAL; + goto out3; + } + + /* Set audio clock heirachy for S/PDIF */ + clk_set_parent(mout_epll, fout_epll); + clk_set_parent(sclk_audio0, mout_epll); + clk_set_parent(sclk_spdif, sclk_audio0); + + clk_put(sclk_spdif); +out3: + clk_put(sclk_audio0); +out2: + clk_put(mout_epll); +out1: + clk_put(fout_epll); + + return ret; +} + +/* We should haved to set clock directly on this part because of clock + * scheme of Samsudng SoCs did not support to set rates from abstrct + * clock of it's heirachy. + */ +static int set_audio_clock_rate(unsigned long epll_rate, + unsigned long audio_rate) +{ + struct clk *fout_epll, *sclk_spdif; + + fout_epll = clk_get(NULL, "fout_epll"); + if (IS_ERR(fout_epll)) { + printk(KERN_ERR "%s: failed to get fout_epll\n", __func__); + return -ENOENT; + } + + clk_set_rate(fout_epll, epll_rate); + clk_put(fout_epll); + + sclk_spdif = clk_get(NULL, "sclk_spdif"); + if (IS_ERR(sclk_spdif)) { + printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__); + return -ENOENT; + } + + clk_set_rate(sclk_spdif, audio_rate); + clk_put(sclk_spdif); + + return 0; +} + +static int smdk_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + unsigned long pll_out, rclk_rate; + int ret, ratio; + + switch (params_rate(params)) { + case 44100: + pll_out = 45158400; + break; + case 32000: + case 48000: + case 96000: + pll_out = 49152000; + break; + default: + return -EINVAL; + } + + /* Setting ratio to 512fs helps to use S/PDIF with HDMI without + * modify S/PDIF ASoC machine driver. + */ + ratio = 512; + rclk_rate = params_rate(params) * ratio; + + /* Set audio source clock rates */ + ret = set_audio_clock_rate(pll_out, rclk_rate); + if (ret < 0) + return ret; + + /* Set S/PDIF uses internal source clock */ + ret = snd_soc_dai_set_sysclk(cpu_dai, SND_SOC_SPDIF_INT_MCLK, + rclk_rate, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return ret; +} + +static struct snd_soc_ops smdk_spdif_ops = { + .hw_params = smdk_hw_params, +}; + +static struct snd_soc_card smdk; + +static struct snd_soc_dai_link smdk_dai = { + .name = "S/PDIF", + .stream_name = "S/PDIF PCM Playback", + .platform_name = "samsung-audio", + .cpu_dai_name = "samsung-spdif", + .codec_dai_name = "dit-hifi", + .codec_name = "spdif-dit", + .ops = &smdk_spdif_ops, +}; + +static struct snd_soc_card smdk = { + .name = "SMDK-S/PDIF", + .dai_link = &smdk_dai, + .num_links = 1, +}; + +static struct platform_device *smdk_snd_spdif_dit_device; +static struct platform_device *smdk_snd_spdif_device; + +static int __init smdk_init(void) +{ + int ret; + + smdk_snd_spdif_dit_device = platform_device_alloc("spdif-dit", -1); + if (!smdk_snd_spdif_dit_device) + return -ENOMEM; + + ret = platform_device_add(smdk_snd_spdif_dit_device); + if (ret) + goto err2; + + smdk_snd_spdif_device = platform_device_alloc("soc-audio", -1); + if (!smdk_snd_spdif_device) { + ret = -ENOMEM; + goto err2; + } + + platform_set_drvdata(smdk_snd_spdif_device, &smdk); + + ret = platform_device_add(smdk_snd_spdif_device); + if (ret) + goto err1; + + /* Set audio clock heirachy manually */ + ret = set_audio_clock_heirachy(smdk_snd_spdif_device); + if (ret) + goto err1; + + return 0; +err1: + platform_device_put(smdk_snd_spdif_device); +err2: + platform_device_put(smdk_snd_spdif_dit_device); + return ret; +} + +static void __exit smdk_exit(void) +{ + platform_device_unregister(smdk_snd_spdif_device); +} + +module_init(smdk_init); +module_exit(smdk_exit); + +MODULE_AUTHOR("Seungwhan Youn, <sw.youn(a)samsung.com>"); +MODULE_DESCRIPTION("ALSA SoC SMDK+S/PDIF"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c new file mode 100644 index 0000000..46ab884 --- /dev/null +++ b/sound/soc/samsung/smdk_wm8580.c @@ -0,0 +1,284 @@ +/* + * smdk_wm8580.c + * + * Copyright (c) 2009 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh <jassi.brar(a)samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> + +#include "../codecs/wm8580.h" +#include "dma.h" +#include "i2s.h" + +/* + * Default CFG switch settings to use this driver: + * + * SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On + */ + +/* SMDK has a 12MHZ crystal attached to WM8580 */ +#define SMDK_WM8580_FREQ 12000000 + +static int smdk_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + unsigned int pll_out; + int bfs, rfs, ret; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_U8: + case SNDRV_PCM_FORMAT_S8: + bfs = 16; + break; + case SNDRV_PCM_FORMAT_U16_LE: + case SNDRV_PCM_FORMAT_S16_LE: + bfs = 32; + break; + default: + return -EINVAL; + } + + /* The Fvco for WM8580 PLLs must fall within [90,100]MHz. + * This criterion can't be met if we request PLL output + * as {8000x256, 64000x256, 11025x256}Hz. + * As a wayout, we rather change rfs to a minimum value that + * results in (params_rate(params) * rfs), and itself, acceptable + * to both - the CODEC and the CPU. + */ + switch (params_rate(params)) { + case 16000: + case 22050: + case 32000: + case 44100: + case 48000: + case 88200: + case 96000: + rfs = 256; + break; + case 64000: + rfs = 384; + break; + case 8000: + case 11025: + rfs = 512; + break; + default: + return -EINVAL; + } + pll_out = params_rate(params) * rfs; + + /* Set the Codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* Set the AP DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* Set WM8580 to drive MCLK from its PLLA */ + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK, + WM8580_CLKSRC_PLLA); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0, + SMDK_WM8580_FREQ, pll_out); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA, + pll_out, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +/* + * SMDK WM8580 DAI operations. + */ +static struct snd_soc_ops smdk_ops = { + .hw_params = smdk_hw_params, +}; + +/* SMDK Playback widgets */ +static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = { + SND_SOC_DAPM_HP("Front", NULL), + SND_SOC_DAPM_HP("Center+Sub", NULL), + SND_SOC_DAPM_HP("Rear", NULL), +}; + +/* SMDK Capture widgets */ +static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = { + SND_SOC_DAPM_MIC("MicIn", NULL), + SND_SOC_DAPM_LINE("LineIn", NULL), +}; + +/* SMDK-PAIFTX connections */ +static const struct snd_soc_dapm_route audio_map_tx[] = { + /* MicIn feeds AINL */ + {"AINL", NULL, "MicIn"}, + + /* LineIn feeds AINL/R */ + {"AINL", NULL, "LineIn"}, + {"AINR", NULL, "LineIn"}, +}; + +/* SMDK-PAIFRX connections */ +static const struct snd_soc_dapm_route audio_map_rx[] = { + /* Front Left/Right are fed VOUT1L/R */ + {"Front", NULL, "VOUT1L"}, + {"Front", NULL, "VOUT1R"}, + + /* Center/Sub are fed VOUT2L/R */ + {"Center+Sub", NULL, "VOUT2L"}, + {"Center+Sub", NULL, "VOUT2R"}, + + /* Rear Left/Right are fed VOUT3L/R */ + {"Rear", NULL, "VOUT3L"}, + {"Rear", NULL, "VOUT3R"}, +}; + +static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + + /* Add smdk specific Capture widgets */ + snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_cpt, + ARRAY_SIZE(wm8580_dapm_widgets_cpt)); + + /* Set up PAIFTX audio path */ + snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx)); + + /* Enabling the microphone requires the fitting of a 0R + * resistor to connect the line from the microphone jack. + */ + snd_soc_dapm_disable_pin(codec, "MicIn"); + + /* signal a DAPM event */ + snd_soc_dapm_sync(codec); + + return 0; +} + +static int smdk_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + + /* Add smdk specific Playback widgets */ + snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_pbk, + ARRAY_SIZE(wm8580_dapm_widgets_pbk)); + + /* Set up PAIFRX audio path */ + snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx)); + + /* signal a DAPM event */ + snd_soc_dapm_sync(codec); + + return 0; +} + +enum { + PRI_PLAYBACK = 0, + PRI_CAPTURE, + SEC_PLAYBACK, +}; + +static struct snd_soc_dai_link smdk_dai[] = { + [PRI_PLAYBACK] = { /* Primary Playback i/f */ + .name = "WM8580 PAIF RX", + .stream_name = "Playback", + .cpu_dai_name = "samsung-i2s.2", + .codec_dai_name = "wm8580-hifi-playback", + .platform_name = "samsung-audio", + .codec_name = "wm8580-codec.0-001b", + .init = smdk_wm8580_init_paifrx, + .ops = &smdk_ops, + }, + [PRI_CAPTURE] = { /* Primary Capture i/f */ + .name = "WM8580 PAIF TX", + .stream_name = "Capture", + .cpu_dai_name = "samsung-i2s.2", + .codec_dai_name = "wm8580-hifi-capture", + .platform_name = "samsung-audio", + .codec_name = "wm8580-codec.0-001b", + .init = smdk_wm8580_init_paiftx, + .ops = &smdk_ops, + }, + [SEC_PLAYBACK] = { /* Sec_Fifo Playback i/f */ + .name = "Sec_FIFO TX", + .stream_name = "Playback", + .cpu_dai_name = "samsung-i2s.x", + .codec_dai_name = "wm8580-hifi-playback", + .platform_name = "samsung-audio", + .codec_name = "wm8580-codec.0-001b", + .init = smdk_wm8580_init_paifrx, + .ops = &smdk_ops, + }, +}; + +static struct snd_soc_card smdk = { + .name = "SMDK-I2S", + .dai_link = smdk_dai, + .num_links = 2, +}; + +static struct platform_device *smdk_snd_device; + +static int __init smdk_audio_init(void) +{ + int ret; + char *str; + + if (machine_is_smdkc100()) { + smdk.num_links = 3; + /* S5PC100 has I2S0 as v5 */ + str = (char *)smdk_dai[PRI_PLAYBACK].cpu_dai_name; + str[strlen(str) - 1] = '0'; + str = (char *)smdk_dai[PRI_CAPTURE].cpu_dai_name; + str[strlen(str) - 1] = '0'; + /* Secondary is at offset MAX_I2S from Primary */ + str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name; + str[strlen(str) - 1] = '0' + MAX_I2S; + } + + smdk_snd_device = platform_device_alloc("soc-audio", -1); + if (!smdk_snd_device) + return -ENOMEM; + + platform_set_drvdata(smdk_snd_device, &smdk); + ret = platform_device_add(smdk_snd_device); + + if (ret) + platform_device_put(smdk_snd_device); + + return ret; +} +module_init(smdk_audio_init); + +MODULE_AUTHOR("Jaswinder Singh, jassi.brar(a)samsung.com"); +MODULE_DESCRIPTION("ALSA SoC SMDK WM8580"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/smdk_wm9713.c b/sound/soc/samsung/smdk_wm9713.c new file mode 100644 index 0000000..7ce2430 --- /dev/null +++ b/sound/soc/samsung/smdk_wm9713.c @@ -0,0 +1,107 @@ +/* + * smdk_wm9713.c -- SoC audio for SMDK + * + * Copyright 2010 Samsung Electronics Co. Ltd. + * Author: Jaswinder Singh Brar <jassi.brar(a)samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <sound/soc.h> + +#include "dma.h" +#include "ac97.h" + +static struct snd_soc_card smdk; + +/* + * Default CFG switch settings to use this driver: + * + * SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off + * SMDKC100: Set CFG6 1-3 On, CFG7 1 On + * SMDKC110: Set CFGB10 1-2 Off, CFGB12 1-3 On + * SMDKV210: Set CFGB10 1-2 Off, CFGB12 1-3 On + */ + +/* + Playback (HeadPhone):- + $ amixer sset 'Headphone' unmute + $ amixer sset 'Right Headphone Out Mux' 'Headphone' + $ amixer sset 'Left Headphone Out Mux' 'Headphone' + $ amixer sset 'Right HP Mixer PCM' unmute + $ amixer sset 'Left HP Mixer PCM' unmute + + Capture (LineIn):- + $ amixer sset 'Right Capture Source' 'Line' + $ amixer sset 'Left Capture Source' 'Line' +*/ + +static struct snd_soc_dai_link smdk_dai = { + .name = "AC97", + .stream_name = "AC97 PCM", + .platform_name = "samsung-audio", + .cpu_dai_name = "samsung-ac97", + .codec_dai_name = "wm9713-hifi", + .codec_name = "wm9713-codec", +}; + +static struct snd_soc_card smdk = { + .name = "SMDK WM9713", + .dai_link = &smdk_dai, + .num_links = 1, +}; + +static struct platform_device *smdk_snd_wm9713_device; +static struct platform_device *smdk_snd_ac97_device; + +static int __init smdk_init(void) +{ + int ret; + + smdk_snd_wm9713_device = platform_device_alloc("wm9713-codec", -1); + if (!smdk_snd_wm9713_device) + return -ENOMEM; + + ret = platform_device_add(smdk_snd_wm9713_device); + if (ret) + goto err; + + smdk_snd_ac97_device = platform_device_alloc("soc-audio", -1); + if (!smdk_snd_ac97_device) { + ret = -ENOMEM; + goto err; + } + + platform_set_drvdata(smdk_snd_ac97_device, &smdk); + + ret = platform_device_add(smdk_snd_ac97_device); + if (ret) { + platform_device_put(smdk_snd_ac97_device); + goto err; + } + + return 0; +err: + platform_device_put(smdk_snd_wm9713_device); + return ret; +} + +static void __exit smdk_exit(void) +{ + platform_device_unregister(smdk_snd_ac97_device); + platform_device_unregister(smdk_snd_wm9713_device); +} + +module_init(smdk_init); +module_exit(smdk_exit); + +/* Module information */ +MODULE_AUTHOR("Jaswinder Singh Brar, jassi.brar(a)samsung.com"); +MODULE_DESCRIPTION("ALSA SoC SMDK+WM9713"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c new file mode 100644 index 0000000..f081640 --- /dev/null +++ b/sound/soc/samsung/spdif.c @@ -0,0 +1,501 @@ +/* sound/soc/samsung/spdif.c + * + * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/io.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <plat/audio.h> +#include <mach/dma.h> + +#include "dma.h" +#include "spdif.h" + +/* Registers */ +#define CLKCON 0x00 +#define CON 0x04 +#define BSTAS 0x08 +#define CSTAS 0x0C +#define DATA_OUTBUF 0x10 +#define DCNT 0x14 +#define BSTAS_S 0x18 +#define DCNT_S 0x1C + +#define CLKCTL_MASK 0x7 +#define CLKCTL_MCLK_EXT (0x1 << 2) +#define CLKCTL_PWR_ON (0x1 << 0) + +#define CON_MASK 0x3ffffff +#define CON_FIFO_TH_SHIFT 19 +#define CON_FIFO_TH_MASK (0x7 << 19) +#define CON_USERDATA_23RDBIT (0x1 << 12) + +#define CON_SW_RESET (0x1 << 5) + +#define CON_MCLKDIV_MASK (0x3 << 3) +#define CON_MCLKDIV_256FS (0x0 << 3) +#define CON_MCLKDIV_384FS (0x1 << 3) +#define CON_MCLKDIV_512FS (0x2 << 3) + +#define CON_PCM_MASK (0x3 << 1) +#define CON_PCM_16BIT (0x0 << 1) +#define CON_PCM_20BIT (0x1 << 1) +#define CON_PCM_24BIT (0x2 << 1) + +#define CON_PCM_DATA (0x1 << 0) + +#define CSTAS_MASK 0x3fffffff +#define CSTAS_SAMP_FREQ_MASK (0xF << 24) +#define CSTAS_SAMP_FREQ_44 (0x0 << 24) +#define CSTAS_SAMP_FREQ_48 (0x2 << 24) +#define CSTAS_SAMP_FREQ_32 (0x3 << 24) +#define CSTAS_SAMP_FREQ_96 (0xA << 24) + +#define CSTAS_CATEGORY_MASK (0xFF << 8) +#define CSTAS_CATEGORY_CODE_CDP (0x01 << 8) + +#define CSTAS_NO_COPYRIGHT (0x1 << 2) + +/** + * struct samsung_spdif_info - Samsung S/PDIF Controller information + * @lock: Spin lock for S/PDIF. + * @dev: The parent device passed to use from the probe. + * @regs: The pointer to the device register block. + * @clk_rate: Current clock rate for calcurate ratio. + * @pclk: The peri-clock pointer for spdif master operation. + * @sclk: The source clock pointer for making sync signals. + * @save_clkcon: Backup clkcon reg. in suspend. + * @save_con: Backup con reg. in suspend. + * @save_cstas: Backup cstas reg. in suspend. + * @dma_playback: DMA information for playback channel. + */ +struct samsung_spdif_info { + spinlock_t lock; + struct device *dev; + void __iomem *regs; + unsigned long clk_rate; + struct clk *pclk; + struct clk *sclk; + u32 saved_clkcon; + u32 saved_con; + u32 saved_cstas; + struct s3c_dma_params *dma_playback; +}; + +static struct s3c2410_dma_client spdif_dma_client_out = { + .name = "S/PDIF Stereo out", +}; + +static struct s3c_dma_params spdif_stereo_out; +static struct samsung_spdif_info spdif_info; + +static inline struct samsung_spdif_info *to_info(struct snd_soc_dai *cpu_dai) +{ + return snd_soc_dai_get_drvdata(cpu_dai); +} + +static void spdif_snd_txctrl(struct samsung_spdif_info *spdif, int on) +{ + void __iomem *regs = spdif->regs; + u32 clkcon; + + dev_dbg(spdif->dev, "Entered %s\n", __func__); + + clkcon = readl(regs + CLKCON) & CLKCTL_MASK; + if (on) + writel(clkcon | CLKCTL_PWR_ON, regs + CLKCON); + else + writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON); +} + +static int spdif_set_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct samsung_spdif_info *spdif = to_info(cpu_dai); + u32 clkcon; + + dev_dbg(spdif->dev, "Entered %s\n", __func__); + + clkcon = readl(spdif->regs + CLKCON); + + if (clk_id == SND_SOC_SPDIF_INT_MCLK) + clkcon &= ~CLKCTL_MCLK_EXT; + else + clkcon |= CLKCTL_MCLK_EXT; + + writel(clkcon, spdif->regs + CLKCON); + + spdif->clk_rate = freq; + + return 0; +} + +static int spdif_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai); + unsigned long flags; + + dev_dbg(spdif->dev, "Entered %s\n", __func__); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + spin_lock_irqsave(&spdif->lock, flags); + spdif_snd_txctrl(spdif, 1); + spin_unlock_irqrestore(&spdif->lock, flags); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + spin_lock_irqsave(&spdif->lock, flags); + spdif_snd_txctrl(spdif, 0); + spin_unlock_irqrestore(&spdif->lock, flags); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int spdif_sysclk_ratios[] = { + 512, 384, 256, +}; + +static int spdif_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *socdai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai); + void __iomem *regs = spdif->regs; + struct s3c_dma_params *dma_data; + u32 con, clkcon, cstas; + unsigned long flags; + int i, ratio; + + dev_dbg(spdif->dev, "Entered %s\n", __func__); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dma_data = spdif->dma_playback; + else { + dev_err(spdif->dev, "Capture is not supported\n"); + return -EINVAL; + } + + snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); + + spin_lock_irqsave(&spdif->lock, flags); + + con = readl(regs + CON) & CON_MASK; + cstas = readl(regs + CSTAS) & CSTAS_MASK; + clkcon = readl(regs + CLKCON) & CLKCTL_MASK; + + con &= ~CON_FIFO_TH_MASK; + con |= (0x7 << CON_FIFO_TH_SHIFT); + con |= CON_USERDATA_23RDBIT; + con |= CON_PCM_DATA; + + con &= ~CON_PCM_MASK; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + con |= CON_PCM_16BIT; + break; + default: + dev_err(spdif->dev, "Unsupported data size.\n"); + goto err; + } + + ratio = spdif->clk_rate / params_rate(params); + for (i = 0; i < ARRAY_SIZE(spdif_sysclk_ratios); i++) + if (ratio == spdif_sysclk_ratios[i]) + break; + if (i == ARRAY_SIZE(spdif_sysclk_ratios)) { + dev_err(spdif->dev, "Invalid clock ratio %ld/%d\n", + spdif->clk_rate, params_rate(params)); + goto err; + } + + con &= ~CON_MCLKDIV_MASK; + switch (ratio) { + case 256: + con |= CON_MCLKDIV_256FS; + break; + case 384: + con |= CON_MCLKDIV_384FS; + break; + case 512: + con |= CON_MCLKDIV_512FS; + break; + } + + cstas &= ~CSTAS_SAMP_FREQ_MASK; + switch (params_rate(params)) { + case 44100: + cstas |= CSTAS_SAMP_FREQ_44; + break; + case 48000: + cstas |= CSTAS_SAMP_FREQ_48; + break; + case 32000: + cstas |= CSTAS_SAMP_FREQ_32; + break; + case 96000: + cstas |= CSTAS_SAMP_FREQ_96; + break; + default: + dev_err(spdif->dev, "Invalid sampling rate %d\n", + params_rate(params)); + goto err; + } + + cstas &= ~CSTAS_CATEGORY_MASK; + cstas |= CSTAS_CATEGORY_CODE_CDP; + cstas |= CSTAS_NO_COPYRIGHT; + + writel(con, regs + CON); + writel(cstas, regs + CSTAS); + writel(clkcon, regs + CLKCON); + + spin_unlock_irqrestore(&spdif->lock, flags); + + return 0; +err: + spin_unlock_irqrestore(&spdif->lock, flags); + return -EINVAL; +} + +static void spdif_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai); + void __iomem *regs = spdif->regs; + u32 con, clkcon; + + dev_dbg(spdif->dev, "Entered %s\n", __func__); + + con = readl(regs + CON) & CON_MASK; + clkcon = readl(regs + CLKCON) & CLKCTL_MASK; + + writel(con | CON_SW_RESET, regs + CON); + cpu_relax(); + + writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON); +} + +#ifdef CONFIG_PM +static int spdif_suspend(struct snd_soc_dai *cpu_dai) +{ + struct samsung_spdif_info *spdif = to_info(cpu_dai); + u32 con = spdif->saved_con; + + dev_dbg(spdif->dev, "Entered %s\n", __func__); + + spdif->saved_clkcon = readl(spdif->regs + CLKCON) & CLKCTL_MASK; + spdif->saved_con = readl(spdif->regs + CON) & CON_MASK; + spdif->saved_cstas = readl(spdif->regs + CSTAS) & CSTAS_MASK; + + writel(con | CON_SW_RESET, spdif->regs + CON); + cpu_relax(); + + return 0; +} + +static int spdif_resume(struct snd_soc_dai *cpu_dai) +{ + struct samsung_spdif_info *spdif = to_info(cpu_dai); + + dev_dbg(spdif->dev, "Entered %s\n", __func__); + + writel(spdif->saved_clkcon, spdif->regs + CLKCON); + writel(spdif->saved_con, spdif->regs + CON); + writel(spdif->saved_cstas, spdif->regs + CSTAS); + + return 0; +} +#else +#define spdif_suspend NULL +#define spdif_resume NULL +#endif + +static struct snd_soc_dai_ops spdif_dai_ops = { + .set_sysclk = spdif_set_sysclk, + .trigger = spdif_trigger, + .hw_params = spdif_hw_params, + .shutdown = spdif_shutdown, +}; + +struct snd_soc_dai_driver samsung_spdif_dai = { + .name = "samsung-spdif", + .playback = { + .stream_name = "S/PDIF Playback", + .channels_min = 2, + .channels_max = 2, + .rates = (SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_96000), + .formats = SNDRV_PCM_FMTBIT_S16_LE, }, + .ops = &spdif_dai_ops, + .suspend = spdif_suspend, + .resume = spdif_resume, +}; + +static __devinit int spdif_probe(struct platform_device *pdev) +{ + struct s3c_audio_pdata *spdif_pdata; + struct resource *mem_res, *dma_res; + struct samsung_spdif_info *spdif; + int ret; + + spdif_pdata = pdev->dev.platform_data; + + dev_dbg(&pdev->dev, "Entered %s\n", __func__); + + dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dma_res) { + dev_err(&pdev->dev, "Unable to get dma resource.\n"); + return -ENXIO; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_res) { + dev_err(&pdev->dev, "Unable to get register resource.\n"); + return -ENXIO; + } + + if (spdif_pdata && spdif_pdata->cfg_gpio + && spdif_pdata->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to configure GPIO pins\n"); + return -EINVAL; + } + + spdif = &spdif_info; + spdif->dev = &pdev->dev; + + spin_lock_init(&spdif->lock); + + spdif->pclk = clk_get(&pdev->dev, "spdif"); + if (IS_ERR(spdif->pclk)) { + dev_err(&pdev->dev, "failed to get peri-clock\n"); + ret = -ENOENT; + goto err0; + } + clk_enable(spdif->pclk); + + spdif->sclk = clk_get(&pdev->dev, "sclk_spdif"); + if (IS_ERR(spdif->sclk)) { + dev_err(&pdev->dev, "failed to get internal source clock\n"); + ret = -ENOENT; + goto err1; + } + clk_enable(spdif->sclk); + + /* Request S/PDIF Register's memory region */ + if (!request_mem_region(mem_res->start, + resource_size(mem_res), "samsung-spdif")) { + dev_err(&pdev->dev, "Unable to request register region\n"); + ret = -EBUSY; + goto err2; + } + + spdif->regs = ioremap(mem_res->start, 0x100); + if (spdif->regs == NULL) { + dev_err(&pdev->dev, "Cannot ioremap registers\n"); + ret = -ENXIO; + goto err3; + } + + dev_set_drvdata(&pdev->dev, spdif); + + ret = snd_soc_register_dai(&pdev->dev, &samsung_spdif_dai); + if (ret != 0) { + dev_err(&pdev->dev, "fail to register dai\n"); + goto err4; + } + + spdif_stereo_out.dma_size = 2; + spdif_stereo_out.client = &spdif_dma_client_out; + spdif_stereo_out.dma_addr = mem_res->start + DATA_OUTBUF; + spdif_stereo_out.channel = dma_res->start; + + spdif->dma_playback = &spdif_stereo_out; + + return 0; + +err4: + iounmap(spdif->regs); +err3: + release_mem_region(mem_res->start, resource_size(mem_res)); +err2: + clk_disable(spdif->sclk); + clk_put(spdif->sclk); +err1: + clk_disable(spdif->pclk); + clk_put(spdif->pclk); +err0: + return ret; +} + +static __devexit int spdif_remove(struct platform_device *pdev) +{ + struct samsung_spdif_info *spdif = &spdif_info; + struct resource *mem_res; + + snd_soc_unregister_dai(&pdev->dev); + + iounmap(spdif->regs); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res) + release_mem_region(mem_res->start, resource_size(mem_res)); + + clk_disable(spdif->sclk); + clk_put(spdif->sclk); + clk_disable(spdif->pclk); + clk_put(spdif->pclk); + + return 0; +} + +static struct platform_driver samsung_spdif_driver = { + .probe = spdif_probe, + .remove = spdif_remove, + .driver = { + .name = "samsung-spdif", + .owner = THIS_MODULE, + }, +}; + +static int __init spdif_init(void) +{ + return platform_driver_register(&samsung_spdif_driver); +} +module_init(spdif_init); + +static void __exit spdif_exit(void) +{ + platform_driver_unregister(&samsung_spdif_driver); +} +module_exit(spdif_exit); + +MODULE_AUTHOR("Seungwhan Youn, <sw.youn(a)samsung.com>"); +MODULE_DESCRIPTION("Samsung S/PDIF Controller Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-spdif"); diff --git a/sound/soc/samsung/spdif.h b/sound/soc/samsung/spdif.h new file mode 100644 index 0000000..4f72cb4 --- /dev/null +++ b/sound/soc/samsung/spdif.h @@ -0,0 +1,19 @@ +/* sound/soc/samsung/spdif.h + * + * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SND_SOC_SAMSUNG_SPDIF_H +#define __SND_SOC_SAMSUNG_SPDIF_H __FILE__ + +#define SND_SOC_SPDIF_INT_MCLK 0 +#define SND_SOC_SPDIF_EXT_MCLK 1 + +#endif /* __SND_SOC_SAMSUNG_SPDIF_H */ -- 1.6.2.5

2 2

[alsa-devel] [PATCH 25/25] ASoC: Samsung: Rename from s3c24xx to samsung
by Jassi Brar 19 Oct '10

19 Oct '10

1 0

← Newer
1
...
8
9
10
11
12
13
14
...
30
Older →

Jump to page: