December 2009 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] opti93x: use dB scale for mixer controls
by Krzysztof Helt 12 Dec '09

12 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Add dB scale for mixer controls. Fix dB scale for Master Volume control. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- The opti93x control patches can wait till next Linux version. I would like to see the patch "opti93x: fix irq releasing if the irq cannot be allocated" in this release as this is a typical bug fix. Regards, Krzysztof sound/isa/opti9xx/opti92x-ad1848.c | 36 ++++++++++++++++++++++-------------- 1 files changed, 22 insertions(+), 14 deletions(-) diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 3f55b31..a4af53b 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -547,32 +547,40 @@ __skip_mpu: #ifdef OPTi93X -static const DECLARE_TLV_DB_SCALE(db_scale_6bit, -9450, 150, 0); +static const DECLARE_TLV_DB_SCALE(db_scale_5bit_3db_step, -9300, 300, 0); +static const DECLARE_TLV_DB_SCALE(db_scale_5bit, -4650, 150, 0); +static const DECLARE_TLV_DB_SCALE(db_scale_4bit_12db_max, -3300, 300, 0); static struct snd_kcontrol_new snd_opti93x_controls[] = { WSS_DOUBLE("Master Playback Switch", 0, OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1), WSS_DOUBLE_TLV("Master Playback Volume", 0, OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1, - db_scale_6bit), -WSS_DOUBLE("PCM Playback Volume", 0, - CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 31, 1), -WSS_DOUBLE("FM Playback Volume", 0, - CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 1, 1, 15, 1), + db_scale_5bit_3db_step), +WSS_DOUBLE_TLV("PCM Playback Volume", 0, + CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 31, 1, + db_scale_5bit), +WSS_DOUBLE_TLV("FM Playback Volume", 0, + CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 1, 1, 15, 1, + db_scale_4bit_12db_max), WSS_DOUBLE("Line Playback Switch", 0, CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1), -WSS_DOUBLE("Line Playback Volume", 0, - CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 15, 1), +WSS_DOUBLE_TLV("Line Playback Volume", 0, + CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 15, 1, + db_scale_4bit_12db_max), WSS_DOUBLE("Mic Playback Switch", 0, OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 7, 7, 1, 1), -WSS_DOUBLE("Mic Playback Volume", 0, - OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 1, 1, 15, 1), -WSS_DOUBLE("CD Playback Volume", 0, - CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 1, 1, 15, 1), +WSS_DOUBLE_TLV("Mic Playback Volume", 0, + OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 1, 1, 15, 1, + db_scale_4bit_12db_max), +WSS_DOUBLE_TLV("CD Playback Volume", 0, + CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 1, 1, 15, 1, + db_scale_4bit_12db_max), WSS_DOUBLE("Aux Playback Switch", 0, OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 7, 7, 1, 1), -WSS_DOUBLE("Aux Playback Volume", 0, - OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 1, 1, 15, 1), +WSS_DOUBLE_TLV("Aux Playback Volume", 0, + OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 1, 1, 15, 1, + db_scale_4bit_12db_max), }; static int __devinit snd_opti93x_mixer(struct snd_wss *chip) -- 1.6.4 ---------------------------------------------------------------------- Zbieraj punkty - wygrywaj nagrody! Kliknij >>> http://link.interia.pl/f24a8

2 1

[alsa-devel] dmix on hda-intel
by Norbert Preining 12 Dec '09

12 Dec '09

Dear all, (please cc) _From the wiki page: NOTE: For ALSA 1.0.9rc2 and higher you don't need to setup dmix. Dmix is enabled as default for soundcards which don't support hw mixing. My ALSA Version: 1.0.21 (see attached alsa-info output) Why is soft mixing still not working? Opening several audio clients does not work at all. Any suggestion, patches (-rc kernels, git diffs to apply?) Thanks Norbert ------------------------------------------------------------------------ Norbert Preining preining(a){jaist.ac.jp, logic.at, debian.org} JAIST, Japan TU Wien, Austria Debian TeX Task Force DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094 ------------------------------------------------------------------------ You're one hundred percent positive that the ship which is crashed on the bottom of this ocean is the ship which you said you were one hundred percent positive could one hundred percent positively never crash? --- Douglas Adams, The Hitchhikers Guide to the Galaxy

2 1

[alsa-devel] [PATCH] dt019x: merge into the als100 driver
by Krzysztof Helt 11 Dec '09

11 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> The als100 driver is so similar to the dt019x/als007 driver that one driver's source can be used for both drivers with only few changes. Merge the dt019x driver into the als100. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- sound/isa/Kconfig | 21 +--- sound/isa/Makefile | 2 - sound/isa/als100.c | 121 ++++++++++++++------ sound/isa/dt019x.c | 321 ---------------------------------------------------- 4 files changed, 90 insertions(+), 375 deletions(-) delete mode 100644 sound/isa/dt019x.c diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 02fe81c..8ebd070 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -63,15 +63,16 @@ config SND_AD1848 will be called snd-ad1848. config SND_ALS100 - tristate "Avance Logic ALS100/ALS120" + tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx" depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART select SND_SB16_DSP help - Say Y here to include support for soundcards based on Avance - Logic ALS100, ALS110, ALS120 and ALS200 chips. + Say Y here to include support for soundcards based on the + Diamond Technologies DT-019X or Avance Logic chips: ALS007, + ALS100, ALS110, ALS120 and ALS200 chips. To compile this driver as a module, choose M here: the module will be called snd-als100. @@ -127,20 +128,6 @@ config SND_CS4236 To compile this driver as a module, choose M here: the module will be called snd-cs4236. -config SND_DT019X - tristate "Diamond Technologies DT-019X, Avance Logic ALS-007" - depends on PNP - select ISAPNP - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_SB16_DSP - help - Say Y here to include support for soundcards based on the - Diamond Technologies DT-019X or Avance Logic ALS-007 chips. - - To compile this driver as a module, choose M here: the module - will be called snd-dt019x. - config SND_ES968 tristate "Generic ESS ES968 driver" depends on PNP diff --git a/sound/isa/Makefile b/sound/isa/Makefile index b906b9a..c73d30c 100644 --- a/sound/isa/Makefile +++ b/sound/isa/Makefile @@ -7,7 +7,6 @@ snd-adlib-objs := adlib.o snd-als100-objs := als100.o snd-azt2320-objs := azt2320.o snd-cmi8330-objs := cmi8330.o -snd-dt019x-objs := dt019x.o snd-es18xx-objs := es18xx.o snd-opl3sa2-objs := opl3sa2.o snd-sc6000-objs := sc6000.o @@ -19,7 +18,6 @@ obj-$(CONFIG_SND_ADLIB) += snd-adlib.o obj-$(CONFIG_SND_ALS100) += snd-als100.o obj-$(CONFIG_SND_AZT2320) += snd-azt2320.o obj-$(CONFIG_SND_CMI8330) += snd-cmi8330.o -obj-$(CONFIG_SND_DT019X) += snd-dt019x.o obj-$(CONFIG_SND_ES18XX) += snd-es18xx.o obj-$(CONFIG_SND_OPL3SA2) += snd-opl3sa2.o obj-$(CONFIG_SND_SC6000) += snd-sc6000.o diff --git a/sound/isa/als100.c b/sound/isa/als100.c index 5fd52e4..20becc8 100644 --- a/sound/isa/als100.c +++ b/sound/isa/als100.c @@ -2,9 +2,13 @@ /* card-als100.c - driver for Avance Logic ALS100 based soundcards. Copyright (C) 1999-2000 by Massimo Piccioni <dafastidio(a)libero.it> + Copyright (C) 1999-2002 by Massimo Piccioni <dafastidio(a)libero.it> Thanks to Pierfrancesco 'qM2' Passerini. + Generalised for soundcards based on DT-0196 and ALS-007 chips + by Jonathan Woithe <jwoithe(a)physics.adelaide.edu.au>: June 2002. + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or @@ -33,10 +37,10 @@ #define PFX "als100: " -MODULE_AUTHOR("Massimo Piccioni <dafastidio(a)libero.it>"); -MODULE_DESCRIPTION("Avance Logic ALS1X0"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("{{Avance Logic,ALS100 - PRO16PNP}," +MODULE_DESCRIPTION("Avance Logic ALS007/ALS1X0"); +MODULE_SUPPORTED_DEVICE("{{Diamond Technologies DT-019X}," + "{Avance Logic ALS-007}}" + "{{Avance Logic,ALS100 - PRO16PNP}," "{Avance Logic,ALS110}," "{Avance Logic,ALS120}," "{Avance Logic,ALS200}," @@ -45,9 +49,12 @@ MODULE_SUPPORTED_DEVICE("{{Avance Logic,ALS100 - PRO16PNP}," "{Avance Logic,ALS120}," "{RTL,RTL3000}}"); +MODULE_AUTHOR("Massimo Piccioni <dafastidio(a)libero.it>"); +MODULE_LICENSE("GPL"); + static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */ +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */ static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ @@ -57,14 +64,15 @@ static int dma8[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ static int dma16[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ module_param_array(index, int, NULL, 0444); -MODULE_PARM_DESC(index, "Index value for als100 based soundcard."); +MODULE_PARM_DESC(index, "Index value for Avance Logic based soundcard."); module_param_array(id, charp, NULL, 0444); -MODULE_PARM_DESC(id, "ID string for als100 based soundcard."); +MODULE_PARM_DESC(id, "ID string for Avance Logic based soundcard."); module_param_array(enable, bool, NULL, 0444); -MODULE_PARM_DESC(enable, "Enable als100 based soundcard."); +MODULE_PARM_DESC(enable, "Enable Avance Logic based soundcard."); + +MODULE_ALIAS("snd-dt019x"); struct snd_card_als100 { - int dev_no; struct pnp_dev *dev; struct pnp_dev *devmpu; struct pnp_dev *devopl; @@ -72,25 +80,43 @@ struct snd_card_als100 { }; static struct pnp_card_device_id snd_als100_pnpids[] = { + /* DT197A30 */ + { .id = "RWB1688", + .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } }, + .driver_data = SB_HW_DT019X }, + /* DT0196 / ALS-007 */ + { .id = "ALS0007", + .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } }, + .driver_data = SB_HW_DT019X }, /* ALS100 - PRO16PNP */ - { .id = "ALS0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } }, + { .id = "ALS0001", + .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } }, + .driver_data = SB_HW_ALS100 }, /* ALS110 - MF1000 - Digimate 3D Sound */ - { .id = "ALS0110", .devs = { { "@@@1001" }, { "@X@1001" }, { "@H@1001" } } }, + { .id = "ALS0110", + .devs = { { "@@@1001" }, { "@X@1001" }, { "@H@1001" } }, + .driver_data = SB_HW_ALS100 }, /* ALS120 */ - { .id = "ALS0120", .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } } }, + { .id = "ALS0120", + .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } }, + .driver_data = SB_HW_ALS100 }, /* ALS200 */ - { .id = "ALS0200", .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0001" } } }, + { .id = "ALS0200", + .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0001" } }, + .driver_data = SB_HW_ALS100 }, /* ALS200 OEM */ - { .id = "ALS0200", .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0020" } } }, + { .id = "ALS0200", + .devs = { { "@@@0020" }, { "@X@0020" }, { "@H@0020" } }, + .driver_data = SB_HW_ALS100 }, /* RTL3000 */ - { .id = "RTL3000", .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } } }, - { .id = "", } /* end */ + { .id = "RTL3000", + .devs = { { "@@@2001" }, { "@X@2001" }, { "@H@2001" } }, + .driver_data = SB_HW_ALS100 }, + { .id = "" } /* end */ }; MODULE_DEVICE_TABLE(pnp_card, snd_als100_pnpids); -#define DRIVER_NAME "snd-card-als100" - static int __devinit snd_card_als100_pnp(int dev, struct snd_card_als100 *acard, struct pnp_card_link *card, const struct pnp_card_device_id *id) @@ -113,8 +139,12 @@ static int __devinit snd_card_als100_pnp(int dev, struct snd_card_als100 *acard, return err; } port[dev] = pnp_port_start(pdev, 0); - dma8[dev] = pnp_dma(pdev, 1); - dma16[dev] = pnp_dma(pdev, 0); + if (id->driver_data == SB_HW_DT019X) + dma8[dev] = pnp_dma(pdev, 0); + else { + dma8[dev] = pnp_dma(pdev, 1); + dma16[dev] = pnp_dma(pdev, 0); + } irq[dev] = pnp_irq(pdev, 0); pdev = acard->devmpu; @@ -175,22 +205,33 @@ static int __devinit snd_card_als100_probe(int dev, } snd_card_set_dev(card, &pcard->card->dev); - if ((error = snd_sbdsp_create(card, port[dev], - irq[dev], - snd_sb16dsp_interrupt, - dma8[dev], - dma16[dev], - SB_HW_ALS100, &chip)) < 0) { + if (pid->driver_data == SB_HW_DT019X) + dma16[dev] = -1; + + error = snd_sbdsp_create(card, port[dev], irq[dev], + snd_sb16dsp_interrupt, + dma8[dev], dma16[dev], + pid->driver_data, + &chip); + if (error < 0) { snd_card_free(card); return error; } acard->chip = chip; - strcpy(card->driver, "ALS100"); - strcpy(card->shortname, "Avance Logic ALS100"); - sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d", - card->shortname, chip->name, chip->port, - irq[dev], dma8[dev], dma16[dev]); + if (pid->driver_data == SB_HW_DT019X) { + strcpy(card->driver, "DT-019X"); + strcpy(card->shortname, "Diamond Tech. DT-019X"); + sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d", + card->shortname, chip->name, chip->port, + irq[dev], dma8[dev]); + } else { + strcpy(card->driver, "ALS100"); + strcpy(card->shortname, "Avance Logic ALS100"); + sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d", + card->shortname, chip->name, chip->port, + irq[dev], dma8[dev], dma16[dev]); + } if ((error = snd_sb16dsp_pcm(chip, 0, NULL)) < 0) { snd_card_free(card); @@ -203,9 +244,19 @@ static int __devinit snd_card_als100_probe(int dev, } if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) { - if (snd_mpu401_uart_new(card, 0, MPU401_HW_ALS100, + int mpu_type = MPU401_HW_ALS100; + + if (mpu_irq[dev] == SNDRV_AUTO_IRQ) + mpu_irq[dev] = -1; + + if (pid->driver_data == SB_HW_DT019X) + mpu_type = MPU401_HW_MPU401; + + if (snd_mpu401_uart_new(card, 0, + mpu_type, mpu_port[dev], 0, - mpu_irq[dev], IRQF_DISABLED, + mpu_irq[dev], + mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL) < 0) snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]); } @@ -291,7 +342,7 @@ static int snd_als100_pnp_resume(struct pnp_card_link *pcard) static struct pnp_card_driver als100_pnpc_driver = { .flags = PNP_DRIVER_RES_DISABLE, - .name = "als100", + .name = "als100", .id_table = snd_als100_pnpids, .probe = snd_als100_pnp_detect, .remove = __devexit_p(snd_als100_pnp_remove), @@ -312,7 +363,7 @@ static int __init alsa_card_als100_init(void) if (!als100_devices) { pnp_unregister_card_driver(&als100_pnpc_driver); #ifdef MODULE - snd_printk(KERN_ERR "no ALS100 based soundcards found\n"); + snd_printk(KERN_ERR "no Avance Logic based soundcards found\n"); #endif return -ENODEV; } diff --git a/sound/isa/dt019x.c b/sound/isa/dt019x.c deleted file mode 100644 index 80f5b1a..0000000 --- a/sound/isa/dt019x.c +++ /dev/null @@ -1,321 +0,0 @@ - -/* - dt019x.c - driver for Diamond Technologies DT-0197H based soundcards. - Copyright (C) 1999, 2002 by Massimo Piccioni <dafastidio(a)libero.it> - - Generalised for soundcards based on DT-0196 and ALS-007 chips - by Jonathan Woithe <jwoithe(a)physics.adelaide.edu.au>: June 2002. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/wait.h> -#include <linux/pnp.h> -#include <linux/moduleparam.h> -#include <sound/core.h> -#include <sound/initval.h> -#include <sound/mpu401.h> -#include <sound/opl3.h> -#include <sound/sb.h> - -#define PFX "dt019x: " - -MODULE_AUTHOR("Massimo Piccioni <dafastidio(a)libero.it>"); -MODULE_DESCRIPTION("Diamond Technologies DT-019X / Avance Logic ALS-007"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("{{Diamond Technologies DT-019X}," - "{Avance Logic ALS-007}}"); - -static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ -static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */ -static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ -static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ -static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */ -static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* PnP setup */ -static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* PnP setup */ -static int dma8[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* PnP setup */ - -module_param_array(index, int, NULL, 0444); -MODULE_PARM_DESC(index, "Index value for DT-019X based soundcard."); -module_param_array(id, charp, NULL, 0444); -MODULE_PARM_DESC(id, "ID string for DT-019X based soundcard."); -module_param_array(enable, bool, NULL, 0444); -MODULE_PARM_DESC(enable, "Enable DT-019X based soundcard."); - -struct snd_card_dt019x { - struct pnp_dev *dev; - struct pnp_dev *devmpu; - struct pnp_dev *devopl; - struct snd_sb *chip; -}; - -static struct pnp_card_device_id snd_dt019x_pnpids[] = { - /* DT197A30 */ - { .id = "RWB1688", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" }, } }, - /* DT0196 / ALS-007 */ - { .id = "ALS0007", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" }, } }, - { .id = "", } -}; - -MODULE_DEVICE_TABLE(pnp_card, snd_dt019x_pnpids); - - -#define DRIVER_NAME "snd-card-dt019x" - - -static int __devinit snd_card_dt019x_pnp(int dev, struct snd_card_dt019x *acard, - struct pnp_card_link *card, - const struct pnp_card_device_id *pid) -{ - struct pnp_dev *pdev; - int err; - - acard->dev = pnp_request_card_device(card, pid->devs[0].id, NULL); - if (acard->dev == NULL) - return -ENODEV; - - acard->devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL); - acard->devopl = pnp_request_card_device(card, pid->devs[2].id, NULL); - - pdev = acard->dev; - - err = pnp_activate_dev(pdev); - if (err < 0) { - snd_printk(KERN_ERR PFX "DT-019X AUDIO pnp configure failure\n"); - return err; - } - - port[dev] = pnp_port_start(pdev, 0); - dma8[dev] = pnp_dma(pdev, 0); - irq[dev] = pnp_irq(pdev, 0); - snd_printdd("dt019x: found audio interface: port=0x%lx, irq=0x%x, dma=0x%x\n", - port[dev],irq[dev],dma8[dev]); - - pdev = acard->devmpu; - if (pdev != NULL) { - err = pnp_activate_dev(pdev); - if (err < 0) { - pnp_release_card_device(pdev); - snd_printk(KERN_ERR PFX "DT-019X MPU401 pnp configure failure, skipping\n"); - goto __mpu_error; - } - mpu_port[dev] = pnp_port_start(pdev, 0); - mpu_irq[dev] = pnp_irq(pdev, 0); - snd_printdd("dt019x: found MPU-401: port=0x%lx, irq=0x%x\n", - mpu_port[dev],mpu_irq[dev]); - } else { - __mpu_error: - acard->devmpu = NULL; - mpu_port[dev] = -1; - } - - pdev = acard->devopl; - if (pdev != NULL) { - err = pnp_activate_dev(pdev); - if (err < 0) { - pnp_release_card_device(pdev); - snd_printk(KERN_ERR PFX "DT-019X OPL3 pnp configure failure, skipping\n"); - goto __fm_error; - } - fm_port[dev] = pnp_port_start(pdev, 0); - snd_printdd("dt019x: found OPL3 synth: port=0x%lx\n",fm_port[dev]); - } else { - __fm_error: - acard->devopl = NULL; - fm_port[dev] = -1; - } - - return 0; -} - -static int __devinit snd_card_dt019x_probe(int dev, struct pnp_card_link *pcard, const struct pnp_card_device_id *pid) -{ - int error; - struct snd_sb *chip; - struct snd_card *card; - struct snd_card_dt019x *acard; - struct snd_opl3 *opl3; - - error = snd_card_create(index[dev], id[dev], THIS_MODULE, - sizeof(struct snd_card_dt019x), &card); - if (error < 0) - return error; - acard = card->private_data; - - snd_card_set_dev(card, &pcard->card->dev); - if ((error = snd_card_dt019x_pnp(dev, acard, pcard, pid))) { - snd_card_free(card); - return error; - } - - if ((error = snd_sbdsp_create(card, port[dev], - irq[dev], - snd_sb16dsp_interrupt, - dma8[dev], - -1, - SB_HW_DT019X, - &chip)) < 0) { - snd_card_free(card); - return error; - } - acard->chip = chip; - - strcpy(card->driver, "DT-019X"); - strcpy(card->shortname, "Diamond Tech. DT-019X"); - sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d", - card->shortname, chip->name, chip->port, - irq[dev], dma8[dev]); - - if ((error = snd_sb16dsp_pcm(chip, 0, NULL)) < 0) { - snd_card_free(card); - return error; - } - if ((error = snd_sbmixer_new(chip)) < 0) { - snd_card_free(card); - return error; - } - - if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) { - if (mpu_irq[dev] == SNDRV_AUTO_IRQ) - mpu_irq[dev] = -1; - if (snd_mpu401_uart_new(card, 0, -/* MPU401_HW_SB,*/ - MPU401_HW_MPU401, - mpu_port[dev], 0, - mpu_irq[dev], - mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, - NULL) < 0) - snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx ?\n", mpu_port[dev]); - } - - if (fm_port[dev] > 0 && fm_port[dev] != SNDRV_AUTO_PORT) { - if (snd_opl3_create(card, - fm_port[dev], - fm_port[dev] + 2, - OPL3_HW_AUTO, 0, &opl3) < 0) { - snd_printk(KERN_ERR PFX "no OPL device at 0x%lx-0x%lx ?\n", - fm_port[dev], fm_port[dev] + 2); - } else { - if ((error = snd_opl3_timer_new(opl3, 0, 1)) < 0) { - snd_card_free(card); - return error; - } - if ((error = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) { - snd_card_free(card); - return error; - } - } - } - - if ((error = snd_card_register(card)) < 0) { - snd_card_free(card); - return error; - } - pnp_set_card_drvdata(pcard, card); - return 0; -} - -static unsigned int __devinitdata dt019x_devices; - -static int __devinit snd_dt019x_pnp_probe(struct pnp_card_link *card, - const struct pnp_card_device_id *pid) -{ - static int dev; - int res; - - for ( ; dev < SNDRV_CARDS; dev++) { - if (!enable[dev]) - continue; - res = snd_card_dt019x_probe(dev, card, pid); - if (res < 0) - return res; - dev++; - dt019x_devices++; - return 0; - } - return -ENODEV; -} - -static void __devexit snd_dt019x_pnp_remove(struct pnp_card_link * pcard) -{ - snd_card_free(pnp_get_card_drvdata(pcard)); - pnp_set_card_drvdata(pcard, NULL); -} - -#ifdef CONFIG_PM -static int snd_dt019x_pnp_suspend(struct pnp_card_link *pcard, pm_message_t state) -{ - struct snd_card *card = pnp_get_card_drvdata(pcard); - struct snd_card_dt019x *acard = card->private_data; - struct snd_sb *chip = acard->chip; - - snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); - snd_pcm_suspend_all(chip->pcm); - snd_sbmixer_suspend(chip); - return 0; -} - -static int snd_dt019x_pnp_resume(struct pnp_card_link *pcard) -{ - struct snd_card *card = pnp_get_card_drvdata(pcard); - struct snd_card_dt019x *acard = card->private_data; - struct snd_sb *chip = acard->chip; - - snd_sbdsp_reset(chip); - snd_sbmixer_resume(chip); - snd_power_change_state(card, SNDRV_CTL_POWER_D0); - return 0; -} -#endif - -static struct pnp_card_driver dt019x_pnpc_driver = { - .flags = PNP_DRIVER_RES_DISABLE, - .name = "dt019x", - .id_table = snd_dt019x_pnpids, - .probe = snd_dt019x_pnp_probe, - .remove = __devexit_p(snd_dt019x_pnp_remove), -#ifdef CONFIG_PM - .suspend = snd_dt019x_pnp_suspend, - .resume = snd_dt019x_pnp_resume, -#endif -}; - -static int __init alsa_card_dt019x_init(void) -{ - int err; - - err = pnp_register_card_driver(&dt019x_pnpc_driver); - if (err) - return err; - - if (!dt019x_devices) { - pnp_unregister_card_driver(&dt019x_pnpc_driver); -#ifdef MODULE - snd_printk(KERN_ERR "no DT-019X / ALS-007 based soundcards found\n"); -#endif - return -ENODEV; - } - return 0; -} - -static void __exit alsa_card_dt019x_exit(void) -{ - pnp_unregister_card_driver(&dt019x_pnpc_driver); -} - -module_init(alsa_card_dt019x_init) -module_exit(alsa_card_dt019x_exit) -- 1.6.4 ---------------------------------------------------------------------- Kup wlasne mieszkanie za 72 tys. zl. Sprawdz najlepsze oferty >>> http://link.interia.pl/f24ce

2 1

[alsa-devel] HD-Audio device unsuppored (Nvidia G2xx-series GPU implemented)
by Stefan Ringel 11 Dec '09

11 Dec '09

Hello Developers, I have an unsupported HD-audio device implemented in Nvidia G2xx-series GPU. (Vendor-ID 0x10de Device-ID 0x0be3, additional 0x0be2 and 0x0be4). I adding this id's in downloaded snapshot and tested it -> works. hda_intel.c ... { PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0be2), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0be3), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0be4), .driver_data = AZX_DRIVER_NVIDIA }, /* Teradici */ ... ..., but the audio-codec 0x10de000b is also unsopported! In Nvidia Windows driver 1.00.00.59 from 2009.10.01 more alsa-unsupported audio-codecs id's. 4x /proc/asound/card1/codec#0 Codec: Nvidia ID b Address: 0 Function Id: 0x1 Vendor Id: 0x10de000b Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Unsolicited: tag=00, enabled=0 Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP Pincap 0x09000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Stefan Ringel wrote to alsa user mail list: I have a G210 Graphic-Card with implemented HD-Audio device. lspci list: 01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce 210] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at dc00 [size=128] [virtual] Expansion ROM at fcf00000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b4] Vendor Specific Information <?> Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information <?> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 01:00.1 Audio device: nVidia Corporation Device 0be3 (rev a1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Dark Shadow shadowofdarkness(a)gmail.com wrote to me: If there is any chance of this info helping here is my Laptop's unsupported hdmi audio device and the video card it is part of. Note the product id is a little different. 01:00.0 VGA compatible controller: nVidia Corporation GT215 [GeForce GTS 250M] (rev a2) Subsystem: Acer Incorporated [ALI] Device 026b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 2000 [size=128] [virtual] Expansion ROM at cd000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b4] Vendor Specific Information <?> Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information <?> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 01:00.1 Audio device: nVidia Corporation Device 0be4 (rev a1) Subsystem: Acer Incorporated [ALI] Device 026b Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at cdefc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

1 0

[alsa-devel] [PATCH 0/5] Intel HDMI fixes
by Wu Fengguang 11 Dec '09

11 Dec '09

Hi Takashi, Here are some fixes for the Intel HDMI patch. I'm not perticular sure about the last two changes, review comments are highly appreciated. Thanks, Fengguang

2 10

[alsa-devel] ASoC update for 2.6.3
by Mark Brown 11 Dec '09

11 Dec '09

The following changes since commit 370066e2b13bafa8e742673f658e617b6ed143a4: Roel Kluin (1): ASoC: Wrong variable returned on error are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.33 Olof Johansson (1): ASoC: Fix build of OMAP sound drivers sound/soc/omap/Makefile | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)

2 1

[alsa-devel] Intel G45 8-Channel LPCM over HDMI
by Alexander Werner 11 Dec '09

11 Dec '09

Hi, I'm planning to build a linux-based, small sized PC for hearing aid acousticians. It would be highly unfavorable, if the connection between Receiver and PC was analog, because of the lower quality and the high number of cables. I searched for a appropriate mainboard, and found the DG45FC, which fits my needs perfectly, apart from the missing audio over HDMI support. Is there any plan to support multichannel LPCM output over HDMI on the Intel G45 platform? If not, is there anyone willing to implement HDMI support for the G45 chipset if I donate the needed hardware (permanently)? But if there's no chance to implement it in the near future, has anyone experience with an onboard chipset with multichannel LPCM over HDMI and ALSA support? Thanks, Alexander Werner

7 10

[alsa-devel] [PATCH] opti93x: move controls definitions to opti93x driver
by Krzysztof Helt 10 Dec '09

10 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Move OPTi93x controls definitions to the opti93x driver from the common wss-lib library module. These controls are used only by the opti93x driver. Also, fix capture source names. They are the same as opl3sa2 names. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- sound/isa/opti9xx/opti92x-ad1848.c | 85 ++++++++++++++++++++++++++++++++++++ sound/isa/wss/wss_lib.c | 80 ++++++--------------------------- 2 files changed, 100 insertions(+), 65 deletions(-) diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index d8eac3f..0991321 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -33,6 +33,7 @@ #include <asm/io.h> #include <asm/dma.h> #include <sound/core.h> +#include <sound/tlv.h> #include <sound/wss.h> #include <sound/mpu401.h> #include <sound/opl3.h> @@ -546,6 +547,85 @@ __skip_mpu: #ifdef OPTi93X +static const DECLARE_TLV_DB_SCALE(db_scale_6bit, -9450, 150, 0); + +static struct snd_kcontrol_new snd_opti93x_controls[] = { +WSS_DOUBLE("Master Playback Switch", 0, + OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1), +WSS_DOUBLE_TLV("Master Playback Volume", 0, + OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1, + db_scale_6bit), +WSS_DOUBLE("PCM Playback Volume", 0, + CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 31, 1), +WSS_DOUBLE("FM Playback Volume", 0, + CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 1, 1, 15, 1), +WSS_DOUBLE("Line Playback Switch", 0, + CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1), +WSS_DOUBLE("Line Playback Volume", 0, + CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 15, 1), +WSS_DOUBLE("Mic Playback Switch", 0, + OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 7, 7, 1, 1), +WSS_DOUBLE("Mic Playback Volume", 0, + OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 1, 1, 15, 1), +WSS_DOUBLE("CD Playback Volume", 0, + CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 1, 1, 15, 1), +WSS_DOUBLE("Aux Playback Switch", 0, + OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 7, 7, 1, 1), +WSS_DOUBLE("Aux Playback Volume", 0, + OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 1, 1, 15, 1), +}; + +static int __devinit snd_opti93x_mixer(struct snd_wss *chip) +{ + struct snd_card *card; + unsigned int idx; + struct snd_ctl_elem_id id1, id2; + int err; + + if (snd_BUG_ON(!chip || !chip->pcm)) + return -EINVAL; + + card = chip->card; + + strcpy(card->mixername, chip->pcm->name); + + memset(&id1, 0, sizeof(id1)); + memset(&id2, 0, sizeof(id2)); + id1.iface = id2.iface = SNDRV_CTL_ELEM_IFACE_MIXER; + /* reassign AUX0 switch to CD */ + strcpy(id1.name, "Aux Playback Switch"); + strcpy(id2.name, "CD Playback Switch"); + err = snd_ctl_rename_id(card, &id1, &id2); + if (err < 0) { + snd_printk(KERN_ERR "Cannot rename opti93x control\n"); + return err; + } + /* reassign AUX1 switch to FM */ + strcpy(id1.name, "Aux Playback Switch"); id1.index = 1; + strcpy(id2.name, "FM Playback Switch"); + err = snd_ctl_rename_id(card, &id1, &id2); + if (err < 0) { + snd_printk(KERN_ERR "Cannot rename opti93x control\n"); + return err; + } + /* remove AUX1 volume */ + strcpy(id1.name, "Aux Playback Volume"); id1.index = 1; + snd_ctl_remove_id(card, &id1); + + /* Replace WSS volume controls with OPTi93x volume controls */ + id1.index = 0; + for (idx = 0; idx < ARRAY_SIZE(snd_opti93x_controls); idx++) { + strcpy(id1.name, snd_opti93x_controls[idx].name); + snd_ctl_remove_id(card, &id1); + + err = snd_ctl_add(card, + snd_ctl_new1(&snd_opti93x_controls[idx], chip)); + if (err < 0) + return err; + } + return 0; +} + static irqreturn_t snd_opti93x_interrupt(int irq, void *dev_id) { struct snd_opti9xx *chip = dev_id; @@ -754,6 +834,11 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) error = snd_wss_mixer(codec); if (error < 0) return error; +#ifdef OPTi93X + error = snd_opti93x_mixer(codec); + if (error < 0) + return error; +#endif #ifdef CS4231 error = snd_wss_timer(codec, 0, &timer); if (error < 0) diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 5b9d6c1..9191b32 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -2014,6 +2014,7 @@ static int snd_wss_info_mux(struct snd_kcontrol *kcontrol, case WSS_HW_INTERWAVE: ptexts = gusmax_texts; break; + case WSS_HW_OPTI93X: case WSS_HW_OPL3SA2: ptexts = opl3sa_texts; break; @@ -2246,54 +2247,12 @@ WSS_SINGLE("Beep Bypass Playback Switch", 0, CS4231_MONO_CTRL, 5, 1, 0), }; -static struct snd_kcontrol_new snd_opti93x_controls[] = { -WSS_DOUBLE("Master Playback Switch", 0, - OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1), -WSS_DOUBLE_TLV("Master Playback Volume", 0, - OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1, - db_scale_6bit), -WSS_DOUBLE("PCM Playback Switch", 0, - CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1), -WSS_DOUBLE("PCM Playback Volume", 0, - CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 31, 1), -WSS_DOUBLE("FM Playback Switch", 0, - CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1), -WSS_DOUBLE("FM Playback Volume", 0, - CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 1, 1, 15, 1), -WSS_DOUBLE("Line Playback Switch", 0, - CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1), -WSS_DOUBLE("Line Playback Volume", 0, - CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 15, 1), -WSS_DOUBLE("Mic Playback Switch", 0, - OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 7, 7, 1, 1), -WSS_DOUBLE("Mic Playback Volume", 0, - OPTi93X_MIC_LEFT_INPUT, OPTi93X_MIC_RIGHT_INPUT, 1, 1, 15, 1), -WSS_DOUBLE("Mic Boost", 0, - CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 5, 5, 1, 0), -WSS_DOUBLE("CD Playback Switch", 0, - CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1), -WSS_DOUBLE("CD Playback Volume", 0, - CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 1, 1, 15, 1), -WSS_DOUBLE("Aux Playback Switch", 0, - OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 7, 7, 1, 1), -WSS_DOUBLE("Aux Playback Volume", 0, - OPTi931_AUX_LEFT_INPUT, OPTi931_AUX_RIGHT_INPUT, 1, 1, 15, 1), -WSS_DOUBLE("Capture Volume", 0, - CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 0, 0, 15, 0), -{ - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .info = snd_wss_info_mux, - .get = snd_wss_get_mux, - .put = snd_wss_put_mux, -} -}; - int snd_wss_mixer(struct snd_wss *chip) { struct snd_card *card; unsigned int idx; int err; + int count = ARRAY_SIZE(snd_wss_controls); if (snd_BUG_ON(!chip || !chip->pcm)) return -EINVAL; @@ -2302,28 +2261,19 @@ int snd_wss_mixer(struct snd_wss *chip) strcpy(card->mixername, chip->pcm->name); - if (chip->hardware == WSS_HW_OPTI93X) - for (idx = 0; idx < ARRAY_SIZE(snd_opti93x_controls); idx++) { - err = snd_ctl_add(card, - snd_ctl_new1(&snd_opti93x_controls[idx], - chip)); - if (err < 0) - return err; - } - else { - int count = ARRAY_SIZE(snd_wss_controls); - - /* Use only the first 11 entries on AD1848 */ - if (chip->hardware & WSS_HW_AD1848_MASK) - count = 11; - - for (idx = 0; idx < count; idx++) { - err = snd_ctl_add(card, - snd_ctl_new1(&snd_wss_controls[idx], - chip)); - if (err < 0) - return err; - } + /* Use only the first 11 entries on AD1848 */ + if (chip->hardware & WSS_HW_AD1848_MASK) + count = 11; + /* There is no loopback on OPTI93X */ + else if (chip->hardware == WSS_HW_OPTI93X) + count = 9; + + for (idx = 0; idx < count; idx++) { + err = snd_ctl_add(card, + snd_ctl_new1(&snd_wss_controls[idx], + chip)); + if (err < 0) + return err; } return 0; } -- 1.6.4 ---------------------------------------------------------------------- Internetowi nie placa! Otworz Konto Direct. http://link.interia.pl/f24f7

1 0

[alsa-devel] [PATCH] Fix build of OMAP sound drivers
by Olof Johansson 10 Dec '09

10 Dec '09

There are build errors when building for some of the omap2/3 boards without enabling sound: sound/built-in.o:(.data+0x43bc): undefined reference to `soc_codec_dev_tlv320aic23' sound/built-in.o:(.data+0x43cc): undefined reference to `tlv320aic23_dai' Confused me quite a bit since the drivers that had references to the codec weren't enabled. Turns out the Makefile was using the wrong config option to enable them. Patch below. Reported-by: Anand Gadiyar <gadiyar(a)ti.com> Signed-off-by: Olof Johansson <olof(a)lixom.net> diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index d49458a..3db8a6c 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -23,9 +23,9 @@ obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o -obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o -obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o -obj-$(CONFIG_MACH_OMAP3517EVM) += snd-soc-am3517evm.o +obj-$(CONFIG_SND_OMAP_SOC_OMAP2EVM) += snd-soc-omap2evm.o +obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o +obj-$(CONFIG_SND_OMAP_SOC_OMAP3517EVM) += snd-soc-am3517evm.o obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o

3 2

[alsa-devel] HD-Audio device unsuppored (Nvidia G2xx-series GPU implemented)
by Stefan Ringel 10 Dec '09

10 Dec '09

Hello Developers, I have an unsupported HD-audio device implemented in Nvidia G2xx-series GPU. (Vendor-ID 0x10de Device-ID 0x0be3, additional 0x0be2 and 0x0be4). I adding this id's in downloaded snapshot and tested it -> works. hda_intel.c ... { PCI_DEVICE(0x10de, 0x0d97), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0be2), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0be3), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0be4), .driver_data = AZX_DRIVER_NVIDIA }, /* Teradici */ ... ..., but the audio-codec 0x10de000b is also unsopported! In Nvidia Windows driver 1.00.00.59 from 2009.10.01 more alsa-unsupported audio-codecs id's. 4x /proc/asound/card1/codec#0 Codec: Nvidia ID b Address: 0 Function Id: 0x1 Vendor Id: 0x10de000b Subsystem Id: 0x10de0101 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Unsolicited: tag=00, enabled=0 Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP Pincap 0x09000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Stefan Ringel wrote to alsa user mail list: I have a G210 Graphic-Card with implemented HD-Audio device. lspci list: 01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce 210] (rev a2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at dc00 [size=128] [virtual] Expansion ROM at fcf00000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b4] Vendor Specific Information <?> Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information <?> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 01:00.1 Audio device: nVidia Corporation Device 0be3 (rev a1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Dark Shadow shadowofdarkness(a)gmail.com wrote to me: If there is any chance of this info helping here is my Laptop's unsupported hdmi audio device and the video card it is part of. Note the product id is a little different. 01:00.0 VGA compatible controller: nVidia Corporation GT215 [GeForce GTS 250M] (rev a2) Subsystem: Acer Incorporated [ALI] Device 026b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 2000 [size=128] [virtual] Expansion ROM at cd000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b4] Vendor Specific Information <?> Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information <?> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 01:00.1 Audio device: nVidia Corporation Device 0be4 (rev a1) Subsystem: Acer Incorporated [ALI] Device 026b Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at cdefc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

3 3