February 2008 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] unable to get alsa configured on Acer Aspire 1640Z
by Richard Lyons 18 Feb '08

18 Feb '08

Hi, I hope this is the right place to report this. Computer: laptop Acer Aspire 1640Z distro: Debian etch kernel: 2.6.17 lspci 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) lspci -nv 00:1b.0 0403: 8086:2668 (rev 04) Subsystem: 1025:009e Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at d000c000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) I've tried model=acer and acer-aspire to no avail. I notice in dmesg after trying 'modprobe snd-hda-intel model=acer' this: hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... but alsamixer shows: Card: HDA Intel Chip: Realtek ALC883 at the top. There seems to be uncertainty about which model number, 882 or 883. I wonder if this is the source of the difficulty. HTH -- richard Lyons

3 4

[alsa-devel] Intel8x0 8 channel sound
by Andrew Boettcher 18 Feb '08

18 Feb '08

For some intel 8x0 cards there is 8 channel sound (such as the ALC850 chip on NFORCE 4 boards), and this has not been patched yet though the patch has been on the bug tracker. Here it is again updated for 1.0.16. There is also a patch for the configuration in alsa-lib for cards/NFORCE.conf. I have been patching my sources every time I update my kernel, I figured it was time for someone to actually submit this somewhere else. The patch was written by Martin Ellis.

2 6

[alsa-devel] alsa-info.sh script
by Travis Place 18 Feb '08

18 Feb '08

Is there any chance that i will be able to push updates for my script back to ALSA? Or is this to be a no-go ? Travis Place. (wishie) -- Happiness is like peeing your pants. Everyone can see it, but only you can feel its warmth

3 3

[alsa-devel] [PATCH] Driver for Emagic Audiowerk 2
by Cédric Brégardis 18 Feb '08

18 Feb '08

Hi, We managed to write ALSA driver for Emagic Audiowerk 2 PCI sound card (based on Philips SAA7146 chip). You can find more information on https://gna.org/projects/aw2-alsa/. We think it's time to integrate the sources into the alsa/kernel tree. So, here is the patch for this driver. We hope this patch is usable. Regards, Jean-Christian Hassler and Cedric Bregardis Signed-off-by: Cedric Bregardis <cedric.bregardis(a)free.fr> Signed-off-by: Jean-Christian Hassler <jhassler(a)free.fr> --- sound/pci/Kconfig | 15 + sound/pci/Makefile | 1 + sound/pci/aw2/Makefile | 3 + sound/pci/aw2/SAA7146.h | 168 ++++++++++ sound/pci/aw2/aw2-alsa.c | 753 +++++++++++++++++++++++++++++++++++++++++++ sound/pci/aw2/aw2-saa7146.c | 613 +++++++++++++++++++++++++++++++++++ sound/pci/aw2/aw2-saa7146.h | 125 +++++++ sound/pci/aw2/aw2_tsl.h | 116 +++++++ 8 files changed, 1794 insertions(+), 0 deletions(-) create mode 100644 sound/pci/aw2/Makefile create mode 100644 sound/pci/aw2/SAA7146.h create mode 100644 sound/pci/aw2/aw2-alsa.c create mode 100644 sound/pci/aw2/aw2-saa7146.c create mode 100644 sound/pci/aw2/aw2-saa7146.h create mode 100644 sound/pci/aw2/aw2_tsl.h diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 812085d..194394b 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -122,6 +122,21 @@ config SND_AU8830 To compile this driver as a module, choose M here: the module will be called snd-au8830. +config SND_AW2 + tristate "Emagic Audiowerk 2" + depends on SND + help + Say Y here to include support for Emagic Audiowerk 2 soundcards. + + Supported features: Analog and SPDIF output. Analog or SPDIF input. + Note: Switch between analog and digital input does not always work. + It can produce continuous noise. The workaround is to switch again + (and again) between digital and analog input until it works. + + To compile this driver as a module, choose M here: the module + will be called snd-aw2. + + config SND_AZT3328 tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)" depends on SND && EXPERIMENTAL diff --git a/sound/pci/Makefile b/sound/pci/Makefile index 2d42fd2..85ef14b 100644 --- a/sound/pci/Makefile +++ b/sound/pci/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_SND) += \ ac97/ \ ali5451/ \ au88x0/ \ + aw2/ \ ca0106/ \ cs46xx/ \ cs5535audio/ \ diff --git a/sound/pci/aw2/Makefile b/sound/pci/aw2/Makefile new file mode 100644 index 0000000..842335d --- /dev/null +++ b/sound/pci/aw2/Makefile @@ -0,0 +1,3 @@ +snd-aw2-objs := aw2-alsa.o aw2-saa7146.o + +obj-$(CONFIG_SND_AW2) += snd-aw2.o diff --git a/sound/pci/aw2/SAA7146.h b/sound/pci/aw2/SAA7146.h new file mode 100644 index 0000000..1fbc66e --- /dev/null +++ b/sound/pci/aw2/SAA7146.h @@ -0,0 +1,168 @@ +/***************************************************************************** + * + * Copyright (C) 2007 Cedric Bregardis <cedric.bregardis AT free.fr> and + * Jean-Christian Hassler <jhassler AT free.fr> + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +/* SAA7146 registers */ +#define PCI_BT_A 0x4C +#define IICTFR 0x8C +#define IICSTA 0x90 +#define BaseA1_in 0x94 +#define ProtA1_in 0x98 +#define PageA1_in 0x9C +#define BaseA1_out 0xA0 +#define ProtA1_out 0xA4 +#define PageA1_out 0xA8 +#define BaseA2_in 0xAC +#define ProtA2_in 0xB0 +#define PageA2_in 0xB4 +#define BaseA2_out 0xB8 +#define ProtA2_out 0xBC +#define PageA2_out 0xC0 +#define IER 0xDC +#define GPIO_CTRL 0xE0 +#define ACON1 0xF4 +#define ACON2 0xF8 +#define MC1 0xFC +#define MC2 0x100 +#define ISR 0x10C +#define PSR 0x110 +#define SSR 0x114 +#define PCI_ADP1 0x12C +#define PCI_ADP2 0x130 +#define PCI_ADP3 0x134 +#define PCI_ADP4 0x138 +#define LEVEL_REP 0x140 +#define FB_BUFFER1 0x144 +#define FB_BUFFER2 0x148 +#define TSL1 0x180 +#define TSL2 0x1C0 + +#define ME (1UL << 11) +#define LIMIT (1UL << 4) +#define PV (1UL << 3) + +/* PSR/ISR/IER */ +#define PPEF (1UL << 31) +#define PABO (1UL << 30) +#define IIC_S (1UL << 17) +#define IIC_E (1UL << 16) +#define A2_in (1UL << 15) +#define A2_out (1UL << 14) +#define A1_in (1UL << 13) +#define A1_out (1UL << 12) +#define AFOU (1UL << 11) +#define PIN3 (1UL << 6) +#define PIN2 (1UL << 5) +#define PIN1 (1UL << 4) +#define PIN0 (1UL << 3) +#define ECS (1UL << 2) +#define EC3S (1UL << 1) +#define EC0S (1UL << 0) + +/* SSR */ +#define PRQ (1UL << 31) +#define PMA (1UL << 30) +#define IIC_EA (1UL << 21) +#define IIC_EW (1UL << 20) +#define IIC_ER (1UL << 19) +#define IIC_EL (1UL << 18) +#define IIC_EF (1UL << 17) +#define AF2_in (1UL << 10) +#define AF2_out (1UL << 9) +#define AF1_in (1UL << 8) +#define AF1_out (1UL << 7) +#define EC5S (1UL << 3) +#define EC4S (1UL << 2) +#define EC2S (1UL << 1) +#define EC1S (1UL << 0) + +/* PCI_BT_A */ +#define BurstA1_in (1UL << 26) +#define ThreshA1_in (1UL << 24) +#define BurstA1_out (1UL << 18) +#define ThreshA1_out (1UL << 16) +#define BurstA2_in (1UL << 10) +#define ThreshA2_in (1UL << 8) +#define BurstA2_out (1UL << 2) +#define ThreshA2_out (1UL << 0) + +/* MC1 */ +#define MRST_N (1UL << 15) +#define EAP (1UL << 9) +#define EI2C (1UL << 8) +#define TR_E_A2_OUT (1UL << 3) +#define TR_E_A2_IN (1UL << 2) +#define TR_E_A1_OUT (1UL << 1) +#define TR_E_A1_IN (1UL << 0) + +/* MC2 */ +#define UPLD_IIC (1UL << 0) + +/* ACON1 */ +#define AUDIO_MODE (1UL << 29) +#define MAXLEVEL (1UL << 22) +#define A1_SWAP (1UL << 21) +#define A2_SWAP (1UL << 20) +#define WS0_CTRL (1UL << 18) +#define WS0_SYNC (1UL << 16) +#define WS1_CTRL (1UL << 14) +#define WS1_SYNC (1UL << 12) +#define WS2_CTRL (1UL << 10) +#define WS2_SYNC (1UL << 8) +#define WS3_CTRL (1UL << 6) +#define WS3_SYNC (1UL << 4) +#define WS4_CTRL (1UL << 2) +#define WS4_SYNC (1UL << 0) + +/* ACON2 */ +#define A1_CLKSRC (1UL << 27) +#define A2_CLKSRC (1UL << 22) +#define INVERT_BCLK1 (1UL << 21) +#define INVERT_BCLK2 (1UL << 20) +#define BCLK1_OEN (1UL << 19) +#define BCLK2_OEN (1UL << 18) + +/* IICSTA */ +#define IICCC (1UL << 8) +#define ABORT (1UL << 7) +#define SPERR (1UL << 6) +#define APERR (1UL << 5) +#define DTERR (1UL << 4) +#define DRERR (1UL << 3) +#define AL (1UL << 2) +#define ERR (1UL << 1) +#define BUSY (1UL << 0) + +/* IICTFR */ +#define BYTE2 (1UL << 24) +#define BYTE1 (1UL << 16) +#define BYTE0 (1UL << 8) +#define ATRR2 (1UL << 6) +#define ATRR1 (1UL << 4) +#define ATRR0 (1UL << 2) +#define ERR (1UL << 1) +#define BUSY (1UL << 0) + +#define START 3 +#define CONT 2 +#define STOP 1 +#define NOP 0 diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c new file mode 100644 index 0000000..f954b0b --- /dev/null +++ b/sound/pci/aw2/aw2-alsa.c @@ -0,0 +1,753 @@ +/***************************************************************************** + * + * Copyright (C) 2007 Cedric Bregardis <cedric.bregardis AT free.fr> and + * Jean-Christian Hassler <jhassler AT free.fr> + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +#include <sound/driver.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/control.h> +#include <linux/interrupt.h> +#include <asm/io.h> +#include "SAA7146.h" + +#include <linux/delay.h> + +#include "aw2-saa7146.h" + +MODULE_LICENSE("GPL"); +/********************************* + * DEFINES + ********************************/ +#define PCI_VENDOR_ID_SAA7146 0x1131 +#define PCI_DEVICE_ID_SAA7146 0x7146 + +#define CTL_ROUTE_ANALOG 0 +#define CTL_ROUTE_DIGITAL 1 + +/********************************* + * TYPEDEFS + ********************************/ + /* hardware definition */ +static struct snd_pcm_hardware snd_aw2_playback_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_44100, + .rate_min = 44100, + .rate_max = 44100, + .channels_min = 2, + .channels_max = 4, + .buffer_bytes_max = 32768, + .period_bytes_min = 4096, + .period_bytes_max = 32768, + .periods_min = 1, + .periods_max = 1024, +}; + +static struct snd_pcm_hardware snd_aw2_capture_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_44100, + .rate_min = 44100, + .rate_max = 44100, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 32768, + .period_bytes_min = 4096, + .period_bytes_max = 32768, + .periods_min = 1, + .periods_max = 1024, +}; + +struct aw2_pcm_device_t { + struct snd_pcm *pcm; + unsigned int stream_number; + struct aw2_t *chip; +}; + +struct aw2_t { + struct snd_aw2_saa7146_t saa7146; + + struct snd_card *card; + + struct aw2_pcm_device_t device_playback[NB_STREAM_PLAYBACK]; + struct aw2_pcm_device_t device_capture[NB_STREAM_CAPTURE]; +}; + +/********************************* + * FUNCTION DECLARATIONS + ********************************/ +static int __init alsa_card_aw2_init(void); +static void __exit alsa_card_aw2_exit(void); +static int snd_aw2_dev_free(struct snd_device *device); +static int __devinit snd_aw2_create(struct snd_card *card, + struct pci_dev *pci, struct aw2_t **rchip); +static int __devinit snd_aw2_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id); +static void __devexit snd_aw2_remove(struct pci_dev *pci); +static int snd_aw2_pcm_playback_open(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_playback_close(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_capture_open(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_capture_close(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params); +static int snd_aw2_pcm_hw_free(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_prepare_playback(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_prepare_capture(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_trigger_playback(struct snd_pcm_substream *substream, + int cmd); +static int snd_aw2_pcm_trigger_capture(struct snd_pcm_substream *substream, + int cmd); +static snd_pcm_uframes_t snd_aw2_pcm_pointer_playback(struct snd_pcm_substream + *substream); +static snd_pcm_uframes_t snd_aw2_pcm_pointer_capture(struct snd_pcm_substream + *substream); +static int __devinit snd_aw2_new_pcm(struct aw2_t *chip); + +static int snd_aw2_control_switch_capture_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +static int snd_aw2_control_switch_capture_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol); +static int snd_aw2_control_switch_capture_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol); + +/********************************* + * VARIABLES + ********************************/ +/* module parameters (see "Module Parameters") */ +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + +static struct pci_device_id snd_aw2_ids[] = { + {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, snd_aw2_ids); + +/* pci_driver definition */ +static struct pci_driver driver = { + .name = "My Own Chip", + .id_table = snd_aw2_ids, + .probe = snd_aw2_probe, + .remove = __devexit_p(snd_aw2_remove), +}; + +/* operators for playback PCM alsa interface */ +static struct snd_pcm_ops snd_aw2_playback_ops = { + .open = snd_aw2_pcm_playback_open, + .close = snd_aw2_pcm_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_aw2_pcm_hw_params, + .hw_free = snd_aw2_pcm_hw_free, + .prepare = snd_aw2_pcm_prepare_playback, + .trigger = snd_aw2_pcm_trigger_playback, + .pointer = snd_aw2_pcm_pointer_playback, +}; + +/* operators for capture PCM alsa interface */ +static struct snd_pcm_ops snd_aw2_capture_ops = { + .open = snd_aw2_pcm_capture_open, + .close = snd_aw2_pcm_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_aw2_pcm_hw_params, + .hw_free = snd_aw2_pcm_hw_free, + .prepare = snd_aw2_pcm_prepare_capture, + .trigger = snd_aw2_pcm_trigger_capture, + .pointer = snd_aw2_pcm_pointer_capture, +}; + +static struct snd_kcontrol_new aw2_control __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .private_value = 0xffff, + .info = snd_aw2_control_switch_capture_info, + .get = snd_aw2_control_switch_capture_get, + .put = snd_aw2_control_switch_capture_put +}; + +/********************************* + * FUNCTION IMPLEMENTATIONS + ********************************/ + +/* initialization of the module */ +static int __init alsa_card_aw2_init(void) +{ + printk(KERN_DEBUG "Load aw2 module\n"); + return pci_register_driver(&driver); +} + +/* clean up the module */ +static void __exit alsa_card_aw2_exit(void) +{ + printk(KERN_DEBUG "Unload aw2 module\n"); + pci_unregister_driver(&driver); +} + +module_init(alsa_card_aw2_init); +module_exit(alsa_card_aw2_exit); + +/* component-destructor + * (see "Management of Cards and Components") + */ +static int snd_aw2_dev_free(struct snd_device *device) +{ + struct aw2_t *chip = device->device_data; + return snd_aw2_saa7146_free(&chip->saa7146); +} + +/* chip-specific constructor + * (see "Management of Cards and Components") + */ +static int __devinit snd_aw2_create(struct snd_card *card, + struct pci_dev *pci, struct aw2_t **rchip) +{ + struct aw2_t *chip; + int err; + static struct snd_device_ops ops = { + .dev_free = snd_aw2_dev_free, + }; + + *rchip = NULL; + + /* initialize the PCI entry */ + err = pci_enable_device(pci); + if (err < 0) + return err; + pci_set_master(pci); + + /* check PCI availability (32bit DMA) */ + if ((pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0) || + (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) < 0)) { + printk(KERN_ERR "Impossible to set 32bit mask DMA\n"); + pci_disable_device(pci); + return -ENXIO; + } + chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + if (chip == NULL) { + pci_disable_device(pci); + return -ENOMEM; + } + + /* initialize the stuff */ + chip->card = card; + chip->saa7146.pci = pci; + chip->saa7146.irq = -1; + + /* (1) PCI resource allocation */ + err = pci_request_regions(pci, "Audiowerk2"); + if (err < 0) { + kfree(chip); + return err; + } + chip->saa7146.iobase_phys = pci_resource_start(pci, 0); + chip->saa7146.iobase_virt = + ioremap_nocache(chip->saa7146.iobase_phys, + pci_resource_len(pci, 0)); + + if (request_irq(pci->irq, snd_aw2_saa7146_interrupt, + IRQF_SHARED, "Audiowerk2", (void *)chip)) { + printk(KERN_ERR "Cannot grab irq %d\n", pci->irq); + snd_aw2_saa7146_free(&chip->saa7146); + return -EBUSY; + } + chip->saa7146.irq = pci->irq; + + /* (2) initialization of the chip hardware */ + snd_aw2_saa7146_setup(&chip->saa7146); + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { + snd_aw2_saa7146_free(&chip->saa7146); + return err; + } + + snd_card_set_dev(card, &pci->dev); + *rchip = chip; + + /* Activate this portion to dump all the saa7146 registers : */ +#if 0 + snd_aw2_saa7146_dump_registers(&chip->saa7146); +#endif + + printk(KERN_INFO + "Audiowerk 2 sound card (saa7146 chipset) detected and " + "managed\n"); + return 0; +} + +/* constructor -- see "Constructor" sub-section */ +static int __devinit snd_aw2_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id) +{ + static int dev; + struct snd_card *card; + struct aw2_t *chip; + int err; + + /* (1) Continue if device is not enabled, else inc dev */ + if (dev >= SNDRV_CARDS) + return -ENODEV; + if (!enable[dev]) { + dev++; + return -ENOENT; + } + + /* (2) Create card instance */ + card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); + if (card == NULL) + return -ENOMEM; + + /* (3) Create main component */ + err = snd_aw2_create(card, pci, &chip); + if (err < 0) { + snd_card_free(card); + return err; + } + + /* initialize semaphore */ + init_MUTEX(&(chip->saa7146.sem)); + /* init spinlock */ + spin_lock_init(&chip->saa7146.reg_lock); + /* initialize wait queue */ + init_waitqueue_head(&chip->saa7146.wait_iic); + /* (4) Define driver ID and name string */ + strcpy(card->driver, "aw2"); + strcpy(card->shortname, "Audiowerk2"); + + sprintf(card->longname, "%s with SAA7146 at 0x%lx irq %i", + card->shortname, chip->saa7146.port, chip->saa7146.irq); + + /* (5) Create other components */ + snd_aw2_new_pcm(chip); + + /* (6) Register card instance */ + err = snd_card_register(card); + if (err < 0) { + snd_card_free(card); + return err; + } + + /* (7) Set PCI driver data */ + pci_set_drvdata(pci, card); + + dev++; + return 0; +} + +/* destructor -- see "Destructor" sub-section */ +static void __devexit snd_aw2_remove(struct pci_dev *pci) +{ + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); +} + +/* open callback */ +static int snd_aw2_pcm_playback_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + printk(KERN_DEBUG "Playback_open \n"); + runtime->hw = snd_aw2_playback_hw; + return 0; +} + +/* close callback */ +static int snd_aw2_pcm_playback_close(struct snd_pcm_substream *substream) +{ + return 0; + +} + +static int snd_aw2_pcm_capture_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + printk(KERN_DEBUG "Capture_open \n"); + runtime->hw = snd_aw2_capture_hw; + return 0; +} + +/* close callback */ +static int snd_aw2_pcm_capture_close(struct snd_pcm_substream *substream) +{ + /* TODO: something to do ? */ + return 0; +} + + /* hw_params callback */ +static int snd_aw2_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + return snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); +} + +/* hw_free callback */ +static int snd_aw2_pcm_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +/* prepare callback for playback */ +static int snd_aw2_pcm_prepare_playback(struct snd_pcm_substream *substream) +{ + struct aw2_pcm_device_t *pcm_device = snd_pcm_substream_chip(substream); + struct aw2_t *chip = pcm_device->chip; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long period_size, buffer_size; + + down(&chip->saa7146.sem); + + period_size = snd_pcm_lib_period_bytes(substream); + buffer_size = snd_pcm_lib_buffer_bytes(substream); + + snd_aw2_saa7146_pcm_init_playback(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_addr, period_size, + buffer_size); + + /* Define Interrupt callback */ + snd_aw2_saa7146_define_it_playback_callback(pcm_device->stream_number, + (snd_aw2_saa7146_it_cb) + snd_pcm_period_elapsed, + (void *)substream); + + up(&chip->saa7146.sem); + + return 0; +} + +/* prepare callback for capture */ +static int snd_aw2_pcm_prepare_capture(struct snd_pcm_substream *substream) +{ + struct aw2_pcm_device_t *pcm_device = snd_pcm_substream_chip(substream); + struct aw2_t *chip = pcm_device->chip; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long period_size, buffer_size; + + down(&chip->saa7146.sem); + + period_size = snd_pcm_lib_period_bytes(substream); + buffer_size = snd_pcm_lib_buffer_bytes(substream); + + snd_aw2_saa7146_pcm_init_capture(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_addr, period_size, + buffer_size); + + /* Define Interrupt callback */ + snd_aw2_saa7146_define_it_capture_callback(pcm_device->stream_number, + (snd_aw2_saa7146_it_cb) + snd_pcm_period_elapsed, + (void *)substream); + + up(&chip->saa7146.sem); + + return 0; +} + +/* playback trigger callback */ +static int snd_aw2_pcm_trigger_playback(struct snd_pcm_substream *substream, + int cmd) +{ + int status = 0; + struct aw2_pcm_device_t *pcm_device = snd_pcm_substream_chip(substream); + struct aw2_t *chip = pcm_device->chip; + spin_lock(&chip->saa7146.reg_lock); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + snd_aw2_saa7146_pcm_trigger_start_playback(&chip->saa7146, + pcm_device-> + stream_number); + break; + case SNDRV_PCM_TRIGGER_STOP: + snd_aw2_saa7146_pcm_trigger_stop_playback(&chip->saa7146, + pcm_device-> + stream_number); + break; + default: + status = -EINVAL; + } + spin_unlock(&chip->saa7146.reg_lock); + return status; +} + +/* capture trigger callback */ +static int snd_aw2_pcm_trigger_capture(struct snd_pcm_substream *substream, + int cmd) +{ + int status = 0; + struct aw2_pcm_device_t *pcm_device = snd_pcm_substream_chip(substream); + struct aw2_t *chip = pcm_device->chip; + spin_lock(&chip->saa7146.reg_lock); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + snd_aw2_saa7146_pcm_trigger_start_capture(&chip->saa7146, + pcm_device-> + stream_number); + break; + case SNDRV_PCM_TRIGGER_STOP: + snd_aw2_saa7146_pcm_trigger_stop_capture(&chip->saa7146, + pcm_device-> + stream_number); + break; + default: + status = -EINVAL; + } + spin_unlock(&chip->saa7146.reg_lock); + return status; +} + +/* playback pointer callback */ +static snd_pcm_uframes_t snd_aw2_pcm_pointer_playback(struct snd_pcm_substream + *substream) +{ + struct aw2_pcm_device_t *pcm_device = snd_pcm_substream_chip(substream); + struct aw2_t *chip = pcm_device->chip; + unsigned int current_ptr; + + /* get the current hardware pointer */ + struct snd_pcm_runtime *runtime = substream->runtime; + current_ptr = + snd_aw2_saa7146_get_hw_pointer_playback(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_area, + runtime->buffer_size); + + return bytes_to_frames(substream->runtime, current_ptr); +} + +/* capture pointer callback */ +static snd_pcm_uframes_t snd_aw2_pcm_pointer_capture(struct snd_pcm_substream + *substream) +{ + struct aw2_pcm_device_t *pcm_device = snd_pcm_substream_chip(substream); + struct aw2_t *chip = pcm_device->chip; + unsigned int current_ptr; + + /* get the current hardware pointer */ + struct snd_pcm_runtime *runtime = substream->runtime; + current_ptr = + snd_aw2_saa7146_get_hw_pointer_capture(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_area, + runtime->buffer_size); + + return bytes_to_frames(substream->runtime, current_ptr); +} + +/* create a pcm device */ +static int __devinit snd_aw2_new_pcm(struct aw2_t *chip) +{ + struct snd_pcm *pcm_playback_ana; + struct snd_pcm *pcm_playback_num; + struct snd_pcm *pcm_capture; + int err = 0; + + /* Create new Alsa PCM device */ + + err = + snd_pcm_new(chip->card, "Audiowerk2 analog playback", 0, 1, 0, + &pcm_playback_ana); + if (err >= 0) { + /* Creation ok */ + struct aw2_pcm_device_t *pcm_device = + &chip->device_playback[NUM_STREAM_PLAYBACK_ANA]; + + /* Set PCM device name */ + strcpy(pcm_playback_ana->name, "Analog playback"); + /* Associate private data to PCM device */ + pcm_playback_ana->private_data = pcm_device; + /* set operators of PCM device */ + snd_pcm_set_ops(pcm_playback_ana, SNDRV_PCM_STREAM_PLAYBACK, + &snd_aw2_playback_ops); + /* store PCM device */ + pcm_device->pcm = pcm_playback_ana; + /* give base chip pointer to our internal pcm device + structure */ + pcm_device->chip = chip; + /* Give stream number to PCM device */ + pcm_device->stream_number = NUM_STREAM_PLAYBACK_ANA; + + /* pre-allocation of buffers */ + /* Preallocate continuous pages. */ + err = + snd_pcm_lib_preallocate_pages_for_all(pcm_playback_ana, + SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data + (chip->saa7146.pci), + 64 * 1024, 64 * 1024); + if (err) { + printk(KERN_ERR + "snd_pcm_lib_preallocate_pages_for_all error " + "(0x%X)\n", err); + } + } + + err = + snd_pcm_new(chip->card, "Audiowerk2 digital playback", 1, 1, 0, + &pcm_playback_num); + + if (err >= 0) { + /* Creation ok */ + struct aw2_pcm_device_t *pcm_device = + &chip->device_playback[NUM_STREAM_PLAYBACK_DIG]; + + /* Set PCM device name */ + strcpy(pcm_playback_num->name, "Digital playback"); + /* Associate private data to PCM device */ + pcm_playback_num->private_data = pcm_device; + /* set operators of PCM device */ + snd_pcm_set_ops(pcm_playback_num, SNDRV_PCM_STREAM_PLAYBACK, + &snd_aw2_playback_ops); + /* store PCM device */ + pcm_device->pcm = pcm_playback_num; + /* give base chip pointer to our internal pcm device + structure */ + pcm_device->chip = chip; + /* Give stream number to PCM device */ + pcm_device->stream_number = NUM_STREAM_PLAYBACK_DIG; + + /* pre-allocation of buffers */ + /* Preallocate continuous pages. */ + err = + snd_pcm_lib_preallocate_pages_for_all(pcm_playback_num, + SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data + (chip->saa7146.pci), + 64 * 1024, 64 * 1024); + if (err) { + printk(KERN_ERR + "snd_pcm_lib_preallocate_pages_for_all error " + "(0x%X)\n", err); + } + } + + err = snd_pcm_new(chip->card, "Audiowerk2 capture", 2, 0, 1, + &pcm_capture); + + if (err >= 0) { + /* Creation ok */ + struct aw2_pcm_device_t *pcm_device = + &chip->device_capture[NUM_STREAM_CAPTURE_ANA]; + + /* Set PCM device name */ + strcpy(pcm_capture->name, "Capture"); + /* Associate private data to PCM device */ + pcm_capture->private_data = pcm_device; + /* set operators of PCM device */ + snd_pcm_set_ops(pcm_capture, SNDRV_PCM_STREAM_CAPTURE, + &snd_aw2_capture_ops); + /* store PCM device */ + pcm_device->pcm = pcm_capture; + /* give base chip pointer to our internal pcm device + structure */ + pcm_device->chip = chip; + /* Give stream number to PCM device */ + pcm_device->stream_number = NUM_STREAM_CAPTURE_ANA; + + /* pre-allocation of buffers */ + /* Preallocate continuous pages. */ + err = + snd_pcm_lib_preallocate_pages_for_all(pcm_capture, + SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data + (chip->saa7146.pci), + 64 * 1024, 64 * 1024); + if (err) { + printk(KERN_ERR + "snd_pcm_lib_preallocate_pages_for_all error " + "(0x%X)\n", err); + } + } + + /* Create control */ + err = snd_ctl_add(chip->card, snd_ctl_new1(&aw2_control, chip)); + if (err < 0) { + printk(KERN_ERR "snd_ctl_add error (0x%X)\n", err); + } + return 0; +} + +static int snd_aw2_control_switch_capture_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[2] = { + "Analog", "Digital" + }; + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) { + uinfo->value.enumerated.item = + uinfo->value.enumerated.items - 1; + } + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int snd_aw2_control_switch_capture_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol) +{ + struct aw2_t *chip = snd_kcontrol_chip(kcontrol); + if (snd_aw2_saa7146_is_using_digital_input(&chip->saa7146)) { + ucontrol->value.enumerated.item[0] = CTL_ROUTE_DIGITAL; + } else { + ucontrol->value.enumerated.item[0] = CTL_ROUTE_ANALOG; + } + return 0; +} + +static int snd_aw2_control_switch_capture_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol) +{ + struct aw2_t *chip = snd_kcontrol_chip(kcontrol); + int changed = 0; + int is_disgital = + snd_aw2_saa7146_is_using_digital_input(&chip->saa7146); + + if (((ucontrol->value.integer.value[0] == CTL_ROUTE_DIGITAL) + && !is_disgital) + || ((ucontrol->value.integer.value[0] == CTL_ROUTE_ANALOG) + && is_disgital)) { + snd_aw2_saa7146_use_digital_input(&chip->saa7146, !is_disgital); + changed = 1; + } + return changed; +} diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c new file mode 100644 index 0000000..f3e180f --- /dev/null +++ b/sound/pci/aw2/aw2-saa7146.c @@ -0,0 +1,613 @@ +/***************************************************************************** + * + * Copyright (C) 2007 Cedric Bregardis <cedric.bregardis AT free.fr> and + * Jean-Christian Hassler <jhassler AT free.fr> + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +#define AW2_SAA7146_M + +#include <sound/driver.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> + +#include <linux/interrupt.h> +#include <asm/io.h> +#include "aw2_tsl.h" +#include "SAA7146.h" + +#include <linux/delay.h> + +#include <asm/system.h> + +#include "aw2-saa7146.h" + +#define WRITEREG(value, addr) do { writel((value), chip->iobase_virt + (addr));\ + mb(); } while (0) +#define READREG(addr) readl(chip->iobase_virt + (addr)) + +static struct snd_aw2_saa7146_cb_param + arr_substream_it_playback_cb[NB_STREAM_PLAYBACK]; +static struct snd_aw2_saa7146_cb_param + arr_substream_it_capture_cb[NB_STREAM_CAPTURE]; + +static int snd_aw2_saa7146_i2c_write(struct snd_aw2_saa7146_t *chip, + unsigned char address, const void *buf, + size_t count); +static int snd_aw2_saa7146_get_limit(int size); + +void snd_aw2_saa7146_dump_registers(struct snd_aw2_saa7146_t *chip) +{ + int i = 0; + for (i = 0; i <= 0x148; i += 4) { + printk(KERN_DEBUG "###DUMP 0x%03x: 0x%08x\n", i, READREG(i)); + } +} + +/* chip-specific destructor + * (see "PCI Resource Managements") + */ +int snd_aw2_saa7146_free(struct snd_aw2_saa7146_t *chip) +{ + /* disable all irqs */ + WRITEREG(0, IER); + + /* reset saa7146 */ + WRITEREG((MRST_N << 16), MC1); + + /* release the irq */ + if (chip->irq >= 0) { + free_irq(chip->irq, (void *)chip); + } + /* release the i/o ports & memory */ + if (chip->iobase_virt) { + iounmap(chip->iobase_virt); + } + pci_release_regions(chip->pci); + /* disable the PCI entry */ + pci_disable_device(chip->pci); + /* release the data */ + kfree(chip); + return 0; +} + +void snd_aw2_saa7146_setup(struct snd_aw2_saa7146_t *chip) +{ + /* set PCI burst/threshold + + Burst length definition + VALUE BURST LENGTH + 000 1 Dword + 001 2 Dwords + 010 4 Dwords + 011 8 Dwords + 100 16 Dwords + 101 32 Dwords + 110 64 Dwords + 111 128 Dwords + + Threshold definition + VALUE WRITE MODE READ MODE + 00 1 Dword of valid data 1 empty Dword + 01 4 Dwords of valid data 4 empty Dwords + 10 8 Dwords of valid data 8 empty Dwords + 11 16 Dwords of valid data 16 empty Dwords */ + + unsigned int acon2; + unsigned int acon1 = 0; + int i; + + /* disable all irqs */ + WRITEREG(0, IER); + + /* reset saa7146 */ + WRITEREG((MRST_N << 16), MC1); + + /* enable audio interface */ +#ifdef __BIG_ENDIAN + acon1 |= A1_SWAP; + acon1 |= A2_SWAP; +#endif + /* WS0_CTRL, WS0_SYNC: input TSL1, I2S */ + + /* At initialization WS1 and WS2 are disbaled (configured as input */ + acon1 |= 0 * WS1_CTRL; + acon1 |= 0 * WS2_CTRL; + + /* WS4 is not used. So it must not restart A2. + This is why it is configured as output (force to low) */ + acon1 |= 3 * WS4_CTRL; + + /* WS3_CTRL, WS3_SYNC: output TSL2, I2S */ + acon1 |= 2 * WS3_CTRL; + + /* A1 and A2 are active and asynchronous */ + acon1 |= 3 * AUDIO_MODE; + WRITEREG(acon1, ACON1); + + /* The following comes from original windows driver. + It is needed to have a correct behavior of input and output + simultenously, but I don't know why ! */ + WRITEREG(3 * (BurstA1_in) + 3 * (ThreshA1_in) + + 3 * (BurstA1_out) + 3 * (ThreshA1_out) + + 3 * (BurstA2_out) + 3 * (ThreshA2_out), PCI_BT_A); + + /* enable audio port pins */ + WRITEREG((EAP << 16) | EAP, MC1); + + /* enable I2C */ + WRITEREG((EI2C << 16) | EI2C, MC1); + /* enable interrupts */ + WRITEREG(A1_out | A2_out | A1_in | IIC_S | IIC_E, IER); + + /* audio configuration */ + acon2 = A2_CLKSRC | BCLK1_OEN; + WRITEREG(acon2, ACON2); + + /* By default use analog input */ + snd_aw2_saa7146_use_digital_input(chip, 0); + + /* TSL setup */ + for (i = 0; i < 8; ++i) { + WRITEREG(tsl1[i], TSL1 + (i * 4)); + WRITEREG(tsl2[i], TSL2 + (i * 4)); + } + +} + +void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146_t *chip, + int stream_number, + unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size) +{ + unsigned long dw_page, dw_limit; + + /* Configure DMA for substream + Configuration informations: ALSA has allocated continuous memory + pages. So we don't need to use MMU of saa7146. + */ + + /* No MMU -> nothing to do with PageA1, we only configure the limit of + PageAx_out register */ + /* Disable MMU */ + dw_page = (0L << 11); + + /* Configure Limit for DMA access. + The limit register defines an address limit, which generates + an interrupt if passed by the actual PCI address pointer. + '0001' means an interrupt will be generated if the lower + 6 bits (64 bytes) of the PCI address are zero. '0010' + defines a limit of 128 bytes, '0011' one of 256 bytes, and + so on up to 1 Mbyte defined by '1111'. This interrupt range + can be calculated as follows: + Range = 2^(5 + Limit) bytes. + */ + dw_limit = snd_aw2_saa7146_get_limit(period_size); + dw_page |= (dw_limit << 4); + + if (stream_number == 0) { + WRITEREG(dw_page, PageA2_out); + + /* Base address for DMA transfert. */ + /* This address has been reserved by ALSA. */ + /* This is a physical address */ + WRITEREG(dma_addr, BaseA2_out); + + /* Define upper limit for DMA access */ + WRITEREG(dma_addr + buffer_size, ProtA2_out); + + } else if (stream_number == 1) { + WRITEREG(dw_page, PageA1_out); + + /* Base address for DMA transfert. */ + /* This address has been reserved by ALSA. */ + /* This is a physical address */ + WRITEREG(dma_addr, BaseA1_out); + + /* Define upper limit for DMA access */ + WRITEREG(dma_addr + buffer_size, ProtA1_out); + } else { + printk(KERN_ERR + "snd_aw2_saa7146_pcm_init_playback: Substream number is " + "not 0 or 1 -> not managed\n"); + } +} + +void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146_t *chip, + int stream_number, unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size) +{ + unsigned long dw_page, dw_limit; + + /* Configure DMA for substream + Configuration informations: ALSA has allocated continuous memory + pages. So we don't need to use MMU of saa7146. + */ + + /* No MMU -> nothing to do with PageA1, we only configure the limit of + PageAx_out register */ + /* Disable MMU */ + dw_page = (0L << 11); + + /* Configure Limit for DMA access. + The limit register defines an address limit, which generates + an interrupt if passed by the actual PCI address pointer. + '0001' means an interrupt will be generated if the lower + 6 bits (64 bytes) of the PCI address are zero. '0010' + defines a limit of 128 bytes, '0011' one of 256 bytes, and + so on up to 1 Mbyte defined by '1111'. This interrupt range + can be calculated as follows: + Range = 2^(5 + Limit) bytes. + */ + dw_limit = snd_aw2_saa7146_get_limit(period_size); + dw_page |= (dw_limit << 4); + + if (stream_number == 0) { + WRITEREG(dw_page, PageA1_in); + + /* Base address for DMA transfert. */ + /* This address has been reserved by ALSA. */ + /* This is a physical address */ + WRITEREG(dma_addr, BaseA1_in); + + /* Define upper limit for DMA access */ + WRITEREG(dma_addr + buffer_size, ProtA1_in); + } else { + printk(KERN_ERR + "snd_aw2_saa7146_pcm_init_capture: Substream number is " + "not 0 -> not managed\n"); + } +} + +void snd_aw2_saa7146_define_it_playback_callback(unsigned int stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param) +{ + if (stream_number < NB_STREAM_PLAYBACK) { + arr_substream_it_playback_cb[stream_number].p_it_callback = + (snd_aw2_saa7146_it_cb) p_it_callback; + arr_substream_it_playback_cb[stream_number].p_callback_param = + (void *)p_callback_param; + } +} + +void snd_aw2_saa7146_define_it_capture_callback(unsigned int stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param) +{ + if (stream_number < NB_STREAM_CAPTURE) { + arr_substream_it_capture_cb[stream_number].p_it_callback = + (snd_aw2_saa7146_it_cb) p_it_callback; + arr_substream_it_capture_cb[stream_number].p_callback_param = + (void *)p_callback_param; + } +} + +void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146_t *chip, + int stream_number) +{ + unsigned int acon1 = 0; + /* In aw8 driver, dma transfert is always active. It is + started and stopped in a larger "space" */ + acon1 = READREG(ACON1); + if (stream_number == 0) { + WRITEREG((TR_E_A2_OUT << 16) | TR_E_A2_OUT, MC1); + + /* WS2_CTRL, WS2_SYNC: output TSL2, I2S */ + acon1 |= 2 * WS2_CTRL; + WRITEREG(acon1, ACON1); + + } else if (stream_number == 1) { + WRITEREG((TR_E_A1_OUT << 16) | TR_E_A1_OUT, MC1); + + /* WS1_CTRL, WS1_SYNC: output TSL1, I2S */ + acon1 |= 1 * WS1_CTRL; + WRITEREG(acon1, ACON1); + } else { + } + +} + +void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146_t *chip, + int stream_number) +{ + unsigned int acon1 = 0; + acon1 = READREG(ACON1); + if (stream_number == 0) { + /* WS2_CTRL, WS2_SYNC: output TSL2, I2S */ + acon1 &= ~(3 * WS2_CTRL); + WRITEREG(acon1, ACON1); + + WRITEREG((TR_E_A2_OUT << 16), MC1); + } else if (stream_number == 1) { + /* WS1_CTRL, WS1_SYNC: output TSL1, I2S */ + acon1 &= ~(3 * WS1_CTRL); + WRITEREG(acon1, ACON1); + + WRITEREG((TR_E_A1_OUT << 16), MC1); + } else { + } +} + +void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146_t *chip, + int stream_number) +{ + /* In aw8 driver, dma transfert is always active. It is + started and stopped in a larger "space" */ + if (stream_number == 0) { + WRITEREG((TR_E_A1_IN << 16) | TR_E_A1_IN, MC1); + } else { + } +} + +void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146_t *chip, + int stream_number) +{ + if (stream_number == 0) { + WRITEREG((TR_E_A1_IN << 16), MC1); + } else { + } + +} + +irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id) +{ + unsigned int isr; + unsigned int iicsta; + struct snd_aw2_saa7146_t *chip = dev_id; + + isr = READREG(ISR); + if (!isr) + return IRQ_NONE; + + WRITEREG(isr, ISR); + + if (isr & (IIC_S | IIC_E)) { + iicsta = READREG(IICSTA); + WRITEREG(0x100, IICSTA); + wake_up(&chip->wait_iic); + } else if (isr) { + } + + if (isr & A1_out) { + if (arr_substream_it_playback_cb[1].p_it_callback != NULL) { + arr_substream_it_playback_cb[1]. + p_it_callback(arr_substream_it_playback_cb[1]. + p_callback_param); + } + } + if (isr & A2_out) { + if (arr_substream_it_playback_cb[0].p_it_callback != NULL) { + arr_substream_it_playback_cb[0]. + p_it_callback(arr_substream_it_playback_cb[0]. + p_callback_param); + } + + } + if (isr & A1_in) { + if (arr_substream_it_capture_cb[0].p_it_callback != NULL) { + arr_substream_it_capture_cb[0]. + p_it_callback(arr_substream_it_capture_cb[0]. + p_callback_param); + } + } + return IRQ_HANDLED; +} + +unsigned int snd_aw2_saa7146_get_hw_pointer_playback(struct snd_aw2_saa7146_t + *chip, int stream_number, + unsigned char *start_addr, + unsigned int buffer_size) +{ + long pci_adp = 0; + size_t ptr = 0; + + if (stream_number == 0) { + pci_adp = READREG(PCI_ADP3); + ptr = pci_adp - (long)start_addr; + + if (ptr == buffer_size) { + ptr = 0; + } + } + if (stream_number == 1) { + pci_adp = READREG(PCI_ADP1); + ptr = pci_adp - (size_t) start_addr; + + if (ptr == buffer_size) { + ptr = 0; + } + } else { + } + return ptr; +} + +unsigned int snd_aw2_saa7146_get_hw_pointer_capture(struct snd_aw2_saa7146_t + *chip, int stream_number, + unsigned char *start_addr, + unsigned int buffer_size) +{ + size_t pci_adp = 0; + size_t ptr = 0; + if (stream_number == 0) { + pci_adp = READREG(PCI_ADP2); + ptr = pci_adp - (size_t) start_addr; + + if (ptr == buffer_size) { + ptr = 0; + } + } else { + } + return ptr; +} + +int snd_aw2_saa7146_set_sample_rate(struct snd_aw2_saa7146_t *chip, int srate) +{ + unsigned int S; + unsigned char DB[4]; + unsigned int iicsta = 0; + int err = 0; + /* check srate range */ + if ((srate < 30000) || (srate > 50000)) + return -EINVAL; + + /* PLL output is 256*fs, reference 1kHz */ + S = srate * 256 / 1000; + + /* LSB is at S2 */ + S <<= 2; + + DB[0] = (S << 1) & 0xff; + DB[1] = (S >> 7) & 0xff; + DB[2] = ((S >> 15) & 0xff) | 0x18; + DB[3] = 0; + + if (chip->iic) + return -EBUSY; + chip->iic = 1; + iicsta = READREG(IICSTA); + up(&chip->sem); + err = snd_aw2_saa7146_i2c_write(chip, 0xc4, DB, sizeof(DB)); + down(&chip->sem); + chip->iic = 0; + return err; + +} + +void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146_t *chip, + int use_digital) +{ + /* FIXME: switch between analog and digital input does not always work. + It can produce a kind of white noise. It seams that received data + are inverted sometime (endian inversion). Why ? I don't know, maybe + a problem of synchronization... However for the time being I have + not found the problem. Workaround: switch again (and again) between + digital and analog input until it works. */ + if (use_digital) { + WRITEREG(0x40, GPIO_CTRL); + } else { + WRITEREG(0x50, GPIO_CTRL); + } +} + +int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146_t *chip) +{ + unsigned int reg_val = READREG(GPIO_CTRL); + if ((reg_val & 0xFF) == 0x40) { + return 1; + } else { + return 0; + } +} + +static int snd_aw2_saa7146_i2c_write(struct snd_aw2_saa7146_t *chip, + unsigned char address, const void *buf, + size_t count) +{ + unsigned int iicsta = 0; + unsigned int iictfr = 0; + int i, b; + + /* We only keep low significant bits i.e. without clock setting */ + iicsta = (READREG(IICSTA) & 0xFF); + + /* Clock setting */ + iicsta = 1 * IICCC; + WRITEREG(iicsta, IICSTA); + WRITEREG((UPLD_IIC << 16) | UPLD_IIC, MC2); + WRITEREG(iicsta, IICSTA); + WRITEREG((UPLD_IIC << 16) | UPLD_IIC, MC2); + if ((iicsta & BUSY) || (iicsta & ERR)) { /* error or busy */ + WRITEREG(iicsta | ABORT, IICSTA); + WRITEREG((UPLD_IIC << 16) | UPLD_IIC, MC2); + /* clear error bits (2x) */ + WRITEREG(iicsta, IICSTA); + WRITEREG((UPLD_IIC << 16) | UPLD_IIC, MC2); + WRITEREG(iicsta, IICSTA); + WRITEREG((UPLD_IIC << 16) | UPLD_IIC, MC2); + } + + iictfr = address * BYTE2; + iictfr |= START * ATRR2; + + for (i = 0; i <= count; ++i) { + b = i % 3; + if ((b == 0) || (i == count)) { + wait_queue_t wait; + init_waitqueue_entry(&wait, current); + + add_wait_queue(&chip->wait_iic, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + WRITEREG(iictfr, IICTFR); + WRITEREG((UPLD_IIC << 16) | UPLD_IIC, MC2); + + schedule(); + set_current_state(TASK_RUNNING); + remove_wait_queue(&chip->wait_iic, &wait); + + if (signal_pending(current)) { + return -ERESTARTSYS; + } + + iicsta = READREG(IICSTA); + if (iicsta & ERR) { + return -EIO; + } + if (i == count) + break; + iictfr = 0; + } + switch (b) { + case 0: + iictfr |= BYTE2 * ((char *)buf)[i]; + iictfr |= ATRR2 * ((count - i == 1) ? STOP : CONT); + break; + case 1: + iictfr |= BYTE1 * ((char *)buf)[i]; + iictfr |= ATRR1 * ((count - i == 1) ? STOP : CONT); + break; + case 2: + iictfr |= BYTE0 * ((char *)buf)[i]; + iictfr |= ATRR0 * ((count - i == 1) ? STOP : CONT); + break; + } + } + return 0; +} + +static int snd_aw2_saa7146_get_limit(int size) +{ + int limitsize = 32; + int limit = 0; + while (limitsize < size) { + limitsize *= 2; + limit++; + } + return limit; +} diff --git a/sound/pci/aw2/aw2-saa7146.h b/sound/pci/aw2/aw2-saa7146.h new file mode 100644 index 0000000..93e4883 --- /dev/null +++ b/sound/pci/aw2/aw2-saa7146.h @@ -0,0 +1,125 @@ +/***************************************************************************** + * + * Copyright (C) 2007 Cedric Bregardis <cedric.bregardis AT free.fr> and + * Jean-Christian Hassler <jhassler AT free.fr> + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +#ifndef AW2_SAA7146 +#define AW2_SAA7146 + +#ifdef AW2_SAA7146_M +#define PUBLIC +#else +#define PUBLIC extern +#endif + +#define NB_STREAM_PLAYBACK 2 +#define NB_STREAM_CAPTURE 1 + +#define NUM_STREAM_PLAYBACK_ANA 0 +#define NUM_STREAM_PLAYBACK_DIG 1 + +#define NUM_STREAM_CAPTURE_ANA 0 + +typedef void (*snd_aw2_saa7146_it_cb) (void *); + +struct snd_aw2_saa7146_cb_param { + snd_aw2_saa7146_it_cb p_it_callback; + void *p_callback_param; +}; + +/* definition of the chip-specific record */ + +struct snd_aw2_saa7146_t { + struct pci_dev *pci; + + unsigned long iobase_phys; + void __iomem *iobase_virt; + unsigned long port; + int irq; + + struct semaphore sem; + spinlock_t reg_lock; + int iic; + wait_queue_head_t wait_iic; +}; + +PUBLIC void snd_aw2_saa7146_dump_registers(struct snd_aw2_saa7146_t *chip); + +PUBLIC int snd_aw2_saa7146_free(struct snd_aw2_saa7146_t *chip); +PUBLIC void snd_aw2_saa7146_setup(struct snd_aw2_saa7146_t *chip); +PUBLIC void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146_t *chip, + int stream_number, + unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size); +PUBLIC void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146_t *chip, + int stream_number, + unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size); +PUBLIC void snd_aw2_saa7146_define_it_playback_callback(unsigned int + stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param); +PUBLIC void snd_aw2_saa7146_define_it_capture_callback(unsigned int + stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param); +PUBLIC void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146_t + *chip, int stream_number); +PUBLIC void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146_t + *chip, int stream_number); + +PUBLIC void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146_t + *chip, + int stream_number); +PUBLIC void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146_t + *chip, int stream_number); + +PUBLIC irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id); +PUBLIC unsigned int snd_aw2_saa7146_get_hw_pointer_playback(struct + snd_aw2_saa7146_t + *chip, + int stream_number, + unsigned char + *start_addr, + unsigned int + buffer_size); +PUBLIC unsigned int snd_aw2_saa7146_get_hw_pointer_capture(struct + snd_aw2_saa7146_t + *chip, + int stream_number, + unsigned char + *start_addr, + unsigned int + buffer_size); +PUBLIC int snd_aw2_saa7146_set_sample_rate(struct snd_aw2_saa7146_t *chip, + int srate); + +PUBLIC void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146_t *chip, + int use_digital); + +PUBLIC int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146_t + *chip); + +#endif diff --git a/sound/pci/aw2/aw2_tsl.h b/sound/pci/aw2/aw2_tsl.h new file mode 100644 index 0000000..af2edbf --- /dev/null +++ b/sound/pci/aw2/aw2_tsl.h @@ -0,0 +1,116 @@ +/***************************************************************************** + * + * Copyright 1998 Emagic Soft- und Hardware GmbH + * Copyright 2002 Martijn Sipkema + * Copyright (C) 2007 Cedric Bregardis <cedric.bregardis AT free.fr> and + * Jean-Christian Hassler <jhassler AT free.fr> + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +#define TSL_WS0 (1UL << 31) +#define TSL_WS1 (1UL << 30) +#define TSL_WS2 (1UL << 29) +#define TSL_WS3 (1UL << 28) +#define TSL_WS4 (1UL << 27) +#define TSL_DIS_A1 (1UL << 24) +#define TSL_SDW_A1 (1UL << 23) +#define TSL_SIB_A1 (1UL << 22) +#define TSL_SF_A1 (1UL << 21) +#define TSL_LF_A1 (1UL << 20) +#define TSL_BSEL_A1 (1UL << 17) +#define TSL_DOD_A1 (1UL << 15) +#define TSL_LOW_A1 (1UL << 14) +#define TSL_DIS_A2 (1UL << 11) +#define TSL_SDW_A2 (1UL << 10) +#define TSL_SIB_A2 (1UL << 9) +#define TSL_SF_A2 (1UL << 8) +#define TSL_LF_A2 (1UL << 7) +#define TSL_BSEL_A2 (1UL << 4) +#define TSL_DOD_A2 (1UL << 2) +#define TSL_LOW_A2 (1UL << 1) +#define TSL_EOS (1UL << 0) + + /* Audiowerk8 hardware setup: */ + /* WS0, SD4, TSL1 - Analog/ digital in */ + /* WS1, SD0, TSL1 - Analog out #1, digital out */ + /* WS2, SD2, TSL1 - Analog out #2 */ + /* WS3, SD1, TSL2 - Analog out #3 */ + /* WS4, SD3, TSL2 - Analog out #4 */ + + /* Audiowerk8 timing: */ + /* Timeslot: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ... */ + + /* A1_INPUT: */ + /* SD4: <_ADC-L_>-------<_ADC-R_>-------< */ + /* WS0: _______________/---------------\_ */ + + /* A1_OUTPUT: */ + /* SD0: <_1-L___>-------<_1-R___>-------< */ + /* WS1: _______________/---------------\_ */ + /* SD2: >-------<_2-L___>-------<_2-R___> */ + /* WS2: -------\_______________/--------- */ + + /* A2_OUTPUT: */ + /* SD1: <_3-L___>-------<_3-R___>-------< */ + /* WS3: _______________/---------------\_ */ + /* SD3: >-------<_4-L___>-------<_4-R___> */ + /* WS4: -------\_______________/--------- */ + +#ifdef __BIG_ENDIAN + /* TODO: not yet implemented */ +#else /* */ + +static int tsl1[8] = { + 1 * TSL_SDW_A1 | 3 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_LF_A1, + + 1 * TSL_SDW_A1 | 2 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1, + + 0 * TSL_SDW_A1 | 3 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1, + + 0 * TSL_SDW_A1 | 2 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1, + + 1 * TSL_SDW_A1 | 1 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0, + + 1 * TSL_SDW_A1 | 0 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0, + + 0 * TSL_SDW_A1 | 1 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0, + + 0 * TSL_SDW_A1 | 0 * TSL_BSEL_A1 | 0 * TSL_DIS_A1 | + 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0 | TSL_SF_A1 | TSL_EOS, +}; + +static int tsl2[8] = { + 0 * TSL_SDW_A2 | 3 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_LF_A2, + 0 * TSL_SDW_A2 | 2 * TSL_BSEL_A2 | 2 * TSL_DOD_A2, + 0 * TSL_SDW_A2 | 3 * TSL_BSEL_A2 | 2 * TSL_DOD_A2, + 0 * TSL_SDW_A2 | 2 * TSL_BSEL_A2 | 2 * TSL_DOD_A2, + 0 * TSL_SDW_A2 | 1 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2, + 0 * TSL_SDW_A2 | 0 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2, + 0 * TSL_SDW_A2 | 1 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2, + 0 * TSL_SDW_A2 | 0 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2 | TSL_EOS +}; + +#endif /* */ -- 1.5.2.5

2 1

[alsa-devel] [PATCH 1/1] Add __devinit macro to at73c213 sound driver probe functions
by Hans-Christian Egtvedt 18 Feb '08

18 Feb '08

This patch adds __devinit to the functions used when probing. Will also reduce the memory footprint a bit if CONFIG_HOTPLUG is not enabled. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt(a)atmel.com> --- sound/spi/at73c213.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index fee869b..83fa475 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -744,7 +744,7 @@ cleanup: /* * Device functions */ -static int snd_at73c213_ssc_init(struct snd_at73c213 *chip) +static int __devinit snd_at73c213_ssc_init(struct snd_at73c213 *chip) { /* * Continuous clock output. @@ -774,7 +774,7 @@ static int snd_at73c213_ssc_init(struct snd_at73c213 *chip) return 0; } -static int snd_at73c213_chip_init(struct snd_at73c213 *chip) +static int __devinit snd_at73c213_chip_init(struct snd_at73c213 *chip) { int retval; unsigned char dac_ctrl = 0; @@ -939,7 +939,7 @@ out: return retval; } -static int snd_at73c213_probe(struct spi_device *spi) +static int __devinit snd_at73c213_probe(struct spi_device *spi) { struct snd_card *card; struct snd_at73c213 *chip; -- 1.5.2.5

2 1

[alsa-devel] [PATCH] Davinci ASoC support
by Vladimir Barinov 18 Feb '08

18 Feb '08

Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board. It includes: - ASoC Davinci DMA driver - ASoC Davinci I2S (Davinci McBSP module based) driver - ASoC Davinci-EVM reference board Signed-off-by: Vladimir Barinov <vbarinov(a)ru.mvista.com> Index: linux-2.6.25-rc1/sound/soc/davinci/Makefile =================================================================== --- /dev/null +++ linux-2.6.25-rc1/sound/soc/davinci/Makefile @@ -0,0 +1,11 @@ +# DAVINCI Platform Support +snd-soc-davinci-objs := davinci-pcm.o +snd-soc-davinci-i2s-objs := davinci-i2s.o + +obj-$(CONFIG_SND_DAVINCI_SOC) += snd-soc-davinci.o +obj-$(CONFIG_SND_DAVINCI_SOC_I2S) += snd-soc-davinci-i2s.o + +# DAVINCI Machine Support +snd-soc-evm-objs := davinci-evm.o + +obj-$(CONFIG_SND_DAVINCI_SOC_EVM) += snd-soc-evm.o Index: linux-2.6.25-rc1/sound/soc/davinci/davinci-evm.c =================================================================== --- /dev/null +++ linux-2.6.25-rc1/sound/soc/davinci/davinci-evm.c @@ -0,0 +1,208 @@ +/* + * ASoC driver for TI DAVINCI EVM platform + * + * Author: Vladimir Barinov, <vbarinov(a)ru.mvista.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source(a)mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> +#include <asm/dma.h> +#include <asm/arch/hardware.h> + +#include "../codecs/tlv320aic3x.h" +#include "davinci-pcm.h" +#include "davinci-i2s.h" + +#define EVM_CODEC_CLOCK 22579200 + +static int evm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; + int ret = 0; + + /* set codec DAI configuration */ + ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_IB_NF); + if (ret < 0) + return ret; + + /* set the codec system clock */ + ret = codec_dai->dai_ops.set_sysclk(codec_dai, 0, EVM_CODEC_CLOCK, + SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops evm_ops = { + .hw_params = evm_hw_params, +}; + +/* davinci-evm machine dapm widgets */ +static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), +}; + +/* davinci-evm machine audio_mapnections to the codec pins */ +static const char *audio_map[][3] = { + /* Headphone connected to HPLOUT, HPROUT */ + {"Headphone Jack", NULL, "HPLOUT"}, + {"Headphone Jack", NULL, "HPROUT"}, + + /* Line Out connected to LLOUT, RLOUT */ + {"Line Out", NULL, "LLOUT"}, + {"Line Out", NULL, "RLOUT"}, + + /* Mic connected to (MIC3L | MIC3R) */ + {"MIC3L", NULL, "Mic Bias 2V"}, + {"MIC3R", NULL, "Mic Bias 2V"}, + {"Mic Bias 2V", NULL, "Mic Jack"}, + + /* Line In connected to (LINE1L | LINE2L), (LINE1R | LINE2R) */ + {"LINE1L", NULL, "Line In"}, + {"LINE2L", NULL, "Line In"}, + {"LINE1R", NULL, "Line In"}, + {"LINE2R", NULL, "Line In"}, + + {NULL, NULL, NULL}, +}; + +/* Logic for a aic3x as connected on a davinci-evm */ +static int evm_aic3x_init(struct snd_soc_codec *codec) +{ + int i; + + /* Add davinci-evm specific widgets */ + for (i = 0; i < ARRAY_SIZE(aic3x_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &aic3x_dapm_widgets[i]); + + /* Set up davinci-evm specific audio path audio_map */ + for (i = 0; audio_map[i][0] != NULL; i++) + snd_soc_dapm_connect_input(codec, audio_map[i][0], + audio_map[i][1], audio_map[i][2]); + + /* not connected */ + snd_soc_dapm_set_endpoint(codec, "MONO_LOUT", 0); + snd_soc_dapm_set_endpoint(codec, "HPLCOM", 0); + snd_soc_dapm_set_endpoint(codec, "HPRCOM", 0); + + /* always connected */ + snd_soc_dapm_set_endpoint(codec, "Headphone Jack", 1); + snd_soc_dapm_set_endpoint(codec, "Line Out", 1); + snd_soc_dapm_set_endpoint(codec, "Mic Jack", 1); + snd_soc_dapm_set_endpoint(codec, "Line In", 1); + + snd_soc_dapm_sync_endpoints(codec); + + return 0; +} + +/* davinci-evm digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link evm_dai = { + .name = "TLV320AIC3X", + .stream_name = "AIC3X", + .cpu_dai = &davinci_i2s_dai, + .codec_dai = &aic3x_dai, + .init = evm_aic3x_init, + .ops = &evm_ops, +}; + +/* davinci-evm audio machine driver */ +static struct snd_soc_machine snd_soc_machine_evm = { + .name = "DaVinci EVM", + .dai_link = &evm_dai, + .num_links = 1, +}; + +/* evm audio private data */ +static struct aic3x_setup_data evm_aic3x_setup = { + .i2c_address = 0x1b, +}; + +/* evm audio subsystem */ +static struct snd_soc_device evm_snd_devdata = { + .machine = &snd_soc_machine_evm, + .platform = &davinci_soc_platform, + .codec_dev = &soc_codec_dev_aic3x, + .codec_data = &evm_aic3x_setup, +}; + +static struct resource evm_snd_resources[] = { + { + .start = DAVINCI_MCBSP_BASE, + .end = DAVINCI_MCBSP_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct evm_snd_platform_data evm_snd_data = { + .tx_dma_ch = DM644X_DMACH_MCBSP_TX, + .rx_dma_ch = DM644X_DMACH_MCBSP_RX, +}; + +static struct platform_device *evm_snd_device; + +static int __init evm_init(void) +{ + int ret; + + evm_snd_device = platform_device_alloc("soc-audio", 0); + if (!evm_snd_device) + return -ENOMEM; + + platform_set_drvdata(evm_snd_device, &evm_snd_devdata); + evm_snd_devdata.dev = &evm_snd_device->dev; + evm_snd_device->dev.platform_data = &evm_snd_data; + + ret = platform_device_add_resources(evm_snd_device, evm_snd_resources, + ARRAY_SIZE(evm_snd_resources)); + if (ret) { + platform_device_put(evm_snd_device); + return ret; + } + + ret = platform_device_add(evm_snd_device); + if (ret) + platform_device_put(evm_snd_device); + + return ret; +} + +static void __exit evm_exit(void) +{ + platform_device_unregister(evm_snd_device); +} + +module_init(evm_init); +module_exit(evm_exit); + +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_DESCRIPTION("TI DAVINCI EVM ASoC driver"); +MODULE_LICENSE("GPL"); Index: linux-2.6.25-rc1/sound/soc/davinci/davinci-i2s.c =================================================================== --- /dev/null +++ linux-2.6.25-rc1/sound/soc/davinci/davinci-i2s.c @@ -0,0 +1,407 @@ +/* + * ALSA SoC I2S (McBSP) Audio Layer for TI DAVINCI processor + * + * Author: Vladimir Barinov, <vbarinov(a)ru.mvista.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source(a)mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include "davinci-pcm.h" + +#define DAVINCI_MCBSP_DRR_REG 0x00 +#define DAVINCI_MCBSP_DXR_REG 0x04 +#define DAVINCI_MCBSP_SPCR_REG 0x08 +#define DAVINCI_MCBSP_RCR_REG 0x0c +#define DAVINCI_MCBSP_XCR_REG 0x10 +#define DAVINCI_MCBSP_SRGR_REG 0x14 +#define DAVINCI_MCBSP_PCR_REG 0x24 + +#define DAVINCI_MCBSP_SPCR_RRST (1 << 0) +#define DAVINCI_MCBSP_SPCR_RINTM(v) ((v) << 4) +#define DAVINCI_MCBSP_SPCR_XRST (1 << 16) +#define DAVINCI_MCBSP_SPCR_XINTM(v) ((v) << 20) +#define DAVINCI_MCBSP_SPCR_GRST (1 << 22) +#define DAVINCI_MCBSP_SPCR_FRST (1 << 23) +#define DAVINCI_MCBSP_SPCR_FREE (1 << 25) + +#define DAVINCI_MCBSP_RCR_RWDLEN1(v) ((v) << 5) +#define DAVINCI_MCBSP_RCR_RFRLEN1(v) ((v) << 8) +#define DAVINCI_MCBSP_RCR_RDATDLY(v) ((v) << 16) +#define DAVINCI_MCBSP_RCR_RWDLEN2(v) ((v) << 21) + +#define DAVINCI_MCBSP_XCR_XWDLEN1(v) ((v) << 5) +#define DAVINCI_MCBSP_XCR_XFRLEN1(v) ((v) << 8) +#define DAVINCI_MCBSP_XCR_XDATDLY(v) ((v) << 16) +#define DAVINCI_MCBSP_XCR_XFIG (1 << 18) +#define DAVINCI_MCBSP_XCR_XWDLEN2(v) ((v) << 21) + +#define DAVINCI_MCBSP_SRGR_FWID(v) ((v) << 8) +#define DAVINCI_MCBSP_SRGR_FPER(v) ((v) << 16) +#define DAVINCI_MCBSP_SRGR_FSGM (1 << 28) + +#define DAVINCI_MCBSP_PCR_CLKRP (1 << 0) +#define DAVINCI_MCBSP_PCR_CLKXP (1 << 1) +#define DAVINCI_MCBSP_PCR_FSRP (1 << 2) +#define DAVINCI_MCBSP_PCR_FSXP (1 << 3) +#define DAVINCI_MCBSP_PCR_CLKRM (1 << 8) +#define DAVINCI_MCBSP_PCR_CLKXM (1 << 9) +#define DAVINCI_MCBSP_PCR_FSRM (1 << 10) +#define DAVINCI_MCBSP_PCR_FSXM (1 << 11) + +#define MOD_REG_BIT(val, mask, set) do { \ + if (set) { \ + val |= mask; \ + } else { \ + val &= ~mask; \ + } \ +} while (0) + +enum { + DAVINCI_MCBSP_WORD_8 = 0, + DAVINCI_MCBSP_WORD_12, + DAVINCI_MCBSP_WORD_16, + DAVINCI_MCBSP_WORD_20, + DAVINCI_MCBSP_WORD_24, + DAVINCI_MCBSP_WORD_32, +}; + +static struct davinci_pcm_dma_params davinci_i2s_pcm_out = { + .name = "I2S PCM Stereo out", +}; + +static struct davinci_pcm_dma_params davinci_i2s_pcm_in = { + .name = "I2S PCM Stereo in", +}; + +struct davinci_mcbsp_dev { + void __iomem *base; + struct clk *clk; + struct davinci_pcm_dma_params *dma_params[2]; +}; + +static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev, + int reg, u32 val) +{ + __raw_writel(val, dev->base + reg); +} + +static inline u32 davinci_mcbsp_read_reg(struct davinci_mcbsp_dev *dev, int reg) +{ + return __raw_readl(dev->base + reg); +} + +static void davinci_mcbsp_start(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data; + u32 w; + + /* Start the sample generator and enable transmitter/receiver */ + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_GRST, 1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 1); + else + MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_RRST, 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w); + + /* Start frame sync */ + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_FRST, 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w); +} + +static void davinci_mcbsp_stop(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data; + u32 w; + + /* Reset transmitter/receiver and sample rate/frame sync generators */ + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_GRST | + DAVINCI_MCBSP_SPCR_FRST, 0); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 0); + else + MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_RRST, 0); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w); +} + +static int davinci_i2s_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; + struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data; + + cpu_dai->dma_data = dev->dma_params[substream->stream]; + + return 0; +} + +static int davinci_i2s_set_dai_fmt(struct snd_soc_cpu_dai *cpu_dai, + unsigned int fmt) +{ + struct davinci_mcbsp_dev *dev = cpu_dai->private_data; + u32 w; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, + DAVINCI_MCBSP_PCR_FSXM | + DAVINCI_MCBSP_PCR_FSRM | + DAVINCI_MCBSP_PCR_CLKXM | + DAVINCI_MCBSP_PCR_CLKRM); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, + DAVINCI_MCBSP_SRGR_FSGM); + break; + case SND_SOC_DAIFMT_CBM_CFM: + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, 0); + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_NF: + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_PCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_PCR_CLKXP | + DAVINCI_MCBSP_PCR_CLKRP, 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, w); + break; + case SND_SOC_DAIFMT_NB_IF: + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_PCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_PCR_FSXP | + DAVINCI_MCBSP_PCR_FSRP, 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, w); + break; + case SND_SOC_DAIFMT_IB_IF: + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_PCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_PCR_CLKXP | + DAVINCI_MCBSP_PCR_CLKRP | + DAVINCI_MCBSP_PCR_FSXP | + DAVINCI_MCBSP_PCR_FSRP, 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, w); + break; + case SND_SOC_DAIFMT_NB_NF: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int davinci_i2s_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct davinci_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data; + struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data; + struct snd_interval *i = NULL; + int mcbsp_word_length; + u32 w; + + /* general line settings */ + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, + DAVINCI_MCBSP_SPCR_RINTM(3) | + DAVINCI_MCBSP_SPCR_XINTM(3) | + DAVINCI_MCBSP_SPCR_FREE); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, + DAVINCI_MCBSP_RCR_RFRLEN1(1) | + DAVINCI_MCBSP_RCR_RDATDLY(1)); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, + DAVINCI_MCBSP_XCR_XFRLEN1(1) | + DAVINCI_MCBSP_XCR_XDATDLY(1) | + DAVINCI_MCBSP_XCR_XFIG); + + i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS); + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SRGR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1), 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, w); + + i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_FRAME_BITS); + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SRGR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1), 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, w); + + /* Determine xfer data type */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + dma_params->data_type = 1; + mcbsp_word_length = DAVINCI_MCBSP_WORD_8; + break; + case SNDRV_PCM_FORMAT_S16_LE: + dma_params->data_type = 2; + mcbsp_word_length = DAVINCI_MCBSP_WORD_16; + break; + case SNDRV_PCM_FORMAT_S32_LE: + dma_params->data_type = 4; + mcbsp_word_length = DAVINCI_MCBSP_WORD_32; + break; + default: + printk(KERN_WARNING "davinci-i2s: unsupported PCM format"); + return -EINVAL; + } + + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_RCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) | + DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length), 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, w); + + w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_XCR_REG); + MOD_REG_BIT(w, DAVINCI_MCBSP_XCR_XWDLEN1(mcbsp_word_length) | + DAVINCI_MCBSP_XCR_XWDLEN2(mcbsp_word_length), 1); + davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, w); + + return 0; +} + +static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd) +{ + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + davinci_mcbsp_start(substream); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + davinci_mcbsp_stop(substream); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int davinci_i2s_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_cpu_dai *cpu_dai = machine->dai_link[pdev->id].cpu_dai; + struct davinci_mcbsp_dev *dev; + struct resource *mem, *ioarea; + struct evm_snd_platform_data *pdata; + int ret; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + return -ENODEV; + } + + ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1, + pdev->name); + if (!ioarea) { + dev_err(&pdev->dev, "McBSP region already claimed\n"); + return -EBUSY; + } + + dev = kzalloc(sizeof(struct davinci_mcbsp_dev), GFP_KERNEL); + if (!dev) { + ret = -ENOMEM; + goto err_release_region; + } + + cpu_dai->private_data = dev; + + dev->clk = clk_get(&pdev->dev, "McBSPCLK"); + if (IS_ERR(dev->clk)) { + ret = -ENODEV; + goto err_free_mem; + } + clk_enable(dev->clk); + + dev->base = (void __iomem *)IO_ADDRESS(mem->start); + pdata = pdev->dev.platform_data; + + dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &davinci_i2s_pcm_out; + dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = pdata->tx_dma_ch; + dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->dma_addr = + (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DXR_REG); + + dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &davinci_i2s_pcm_in; + dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = pdata->rx_dma_ch; + dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->dma_addr = + (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DRR_REG); + + return 0; + +err_free_mem: + kfree(dev); +err_release_region: + release_mem_region(mem->start, (mem->end - mem->start) + 1); + + return ret; +} + +static void davinci_i2s_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_cpu_dai *cpu_dai = machine->dai_link[pdev->id].cpu_dai; + struct davinci_mcbsp_dev *dev = cpu_dai->private_data; + struct resource *mem; + + clk_disable(dev->clk); + clk_put(dev->clk); + dev->clk = NULL; + + kfree(dev); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem->start, (mem->end - mem->start) + 1); +} + +#define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000 + +struct snd_soc_cpu_dai davinci_i2s_dai = { + .name = "davinci-i2s", + .id = 0, + .type = SND_SOC_DAI_I2S, + .probe = davinci_i2s_probe, + .remove = davinci_i2s_remove, + .playback = { + .channels_min = 2, + .channels_max = 2, + .rates = DAVINCI_I2S_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .channels_min = 2, + .channels_max = 2, + .rates = DAVINCI_I2S_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = { + .startup = davinci_i2s_startup, + .trigger = davinci_i2s_trigger, + .hw_params = davinci_i2s_hw_params,}, + .dai_ops = { + .set_fmt = davinci_i2s_set_dai_fmt, + }, +}; +EXPORT_SYMBOL_GPL(davinci_i2s_dai); + +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_DESCRIPTION("TI DAVINCI I2S (McBSP) SoC Interface"); +MODULE_LICENSE("GPL"); Index: linux-2.6.25-rc1/sound/soc/davinci/davinci-i2s.h =================================================================== --- /dev/null +++ linux-2.6.25-rc1/sound/soc/davinci/davinci-i2s.h @@ -0,0 +1,17 @@ +/* + * ALSA SoC I2S (McBSP) Audio Layer for TI DAVINCI processor + * + * Author: Vladimir Barinov, <vbarinov(a)ru.mvista.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source(a)mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DAVINCI_I2S_H +#define _DAVINCI_I2S_H + +extern struct snd_soc_cpu_dai davinci_i2s_dai; + +#endif Index: linux-2.6.25-rc1/sound/soc/davinci/davinci-pcm.c =================================================================== --- /dev/null +++ linux-2.6.25-rc1/sound/soc/davinci/davinci-pcm.c @@ -0,0 +1,389 @@ +/* + * ALSA PCM interface for the TI DAVINCI processor + * + * Author: Vladimir Barinov, <vbarinov(a)ru.mvista.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source(a)mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <asm/dma.h> + +#include "davinci-pcm.h" + +#define DAVINCI_PCM_DEBUG 0 +#if DAVINCI_PCM_DEBUG +#define DPRINTK(x...) printk(KERN_DEBUG x) +#else +#define DPRINTK(x...) +#endif + +static struct snd_pcm_hardware davinci_pcm_hardware = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE), + .formats = (SNDRV_PCM_FMTBIT_S16_LE), + .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_KNOT), + .rate_min = 8000, + .rate_max = 96000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 128 * 1024, + .period_bytes_min = 32, + .period_bytes_max = 8 * 1024, + .periods_min = 16, + .periods_max = 255, + .fifo_size = 0, +}; + +struct davinci_runtime_data { + spinlock_t lock; + int period; /* current DMA period */ + int master_lch; /* Master DMA channel */ + int slave_lch; /* Slave DMA channel */ + struct davinci_pcm_dma_params *params; /* DMA params */ +}; + +static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream) +{ + struct davinci_runtime_data *prtd = substream->runtime->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; + int lch = prtd->slave_lch; + unsigned int period_size; + unsigned int dma_offset; + dma_addr_t dma_pos; + dma_addr_t src, dst; + unsigned short src_bidx, dst_bidx; + unsigned int data_type; + unsigned int count; + + period_size = snd_pcm_lib_period_bytes(substream); + dma_offset = prtd->period * period_size; + dma_pos = runtime->dma_addr + dma_offset; + + DPRINTK("audio_set_dma_params_play channel = %d dma_ptr = %x " + "period_size=%x\n", lch, dma_pos, period_size); + + data_type = prtd->params->data_type; + count = period_size / data_type; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + src = dma_pos; + dst = prtd->params->dma_addr; + src_bidx = data_type; + dst_bidx = 0; + } else { + src = prtd->params->dma_addr; + dst = dma_pos; + src_bidx = 0; + dst_bidx = data_type; + } + + davinci_set_dma_src_params(lch, src, INCR, W8BIT); + davinci_set_dma_dest_params(lch, dst, INCR, W8BIT); + davinci_set_dma_src_index(lch, src_bidx, 0); + davinci_set_dma_dest_index(lch, dst_bidx, 0); + davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC); + + prtd->period++; + if (unlikely(prtd->period >= runtime->periods)) + prtd->period = 0; +} + +static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data) +{ + struct snd_pcm_substream *substream = data; + struct davinci_runtime_data *prtd = substream->runtime->private_data; + + DPRINTK("lch=%d, status=0x%x\n", lch, ch_status); + + if (unlikely(ch_status != DMA_COMPLETE)) + return; + + if (snd_pcm_running(substream)) { + snd_pcm_period_elapsed(substream); + + spin_lock(&prtd->lock); + davinci_pcm_enqueue_dma(substream); + spin_unlock(&prtd->lock); + } +} + +static int davinci_pcm_dma_request(struct snd_pcm_substream *substream) +{ + struct davinci_runtime_data *prtd = substream->runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data; + int tcc = TCC_ANY; + int ret; + + if (!dma_data) + return -ENODEV; + + prtd->params = dma_data; + + /* Request master DMA channel */ + ret = davinci_request_dma(prtd->params->channel, prtd->params->name, + davinci_pcm_dma_irq, substream, + &prtd->master_lch, &tcc, EVENTQ_0); + if (ret) + return ret; + + /* Request slave DMA channel */ + ret = davinci_request_dma(PARAM_ANY, "Link", + NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0); + if (ret) { + davinci_free_dma(prtd->master_lch); + return ret; + } + + /* Link slave DMA channel in loopback */ + davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch); + + return 0; +} + +static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct davinci_runtime_data *prtd = substream->runtime->private_data; + int ret = 0; + + spin_lock(&prtd->lock); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + davinci_start_dma(prtd->master_lch); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + davinci_stop_dma(prtd->master_lch); + break; + default: + ret = -EINVAL; + break; + } + + spin_unlock(&prtd->lock); + + return ret; +} + +static int davinci_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct davinci_runtime_data *prtd = substream->runtime->private_data; + struct paramentry_descriptor temp; + + prtd->period = 0; + davinci_pcm_enqueue_dma(substream); + + /* Get slave channel dma params for master channel startup */ + davinci_get_dma_params(prtd->slave_lch, &temp); + davinci_set_dma_params(prtd->master_lch, &temp); + + return 0; +} + +static snd_pcm_uframes_t +davinci_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct davinci_runtime_data *prtd = runtime->private_data; + unsigned int offset; + dma_addr_t count; + dma_addr_t src, dst; + + spin_lock(&prtd->lock); + + davinci_dma_getposition(prtd->master_lch, &src, &dst); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + count = src - runtime->dma_addr; + else + count = dst - runtime->dma_addr;; + + spin_unlock(&prtd->lock); + + offset = bytes_to_frames(runtime, count); + if (offset >= runtime->buffer_size) + offset = 0; + + return offset; +} + +static int davinci_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct davinci_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &davinci_pcm_hardware); + + prtd = kzalloc(sizeof(struct davinci_runtime_data), GFP_KERNEL); + if (prtd == NULL) + return -ENOMEM; + + spin_lock_init(&prtd->lock); + + runtime->private_data = prtd; + + ret = davinci_pcm_dma_request(substream); + if (ret) { + printk(KERN_ERR "davinci_pcm: Failed to get dma channels\n"); + kfree(prtd); + } + + return ret; +} + +static int davinci_pcm_close(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct davinci_runtime_data *prtd = runtime->private_data; + + davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch); + + davinci_free_dma(prtd->slave_lch); + davinci_free_dma(prtd->master_lch); + + kfree(prtd); + + return 0; +} + +static int davinci_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + return snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); +} + +static int davinci_pcm_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +static int davinci_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + return dma_mmap_writecombine(substream->pcm->card->dev, vma, + runtime->dma_area, + runtime->dma_addr, + runtime->dma_bytes); +} + +struct snd_pcm_ops davinci_pcm_ops = { + .open = davinci_pcm_open, + .close = davinci_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = davinci_pcm_hw_params, + .hw_free = davinci_pcm_hw_free, + .prepare = davinci_pcm_prepare, + .trigger = davinci_pcm_trigger, + .pointer = davinci_pcm_pointer, + .mmap = davinci_pcm_mmap, +}; + +static int davinci_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = davinci_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_writecombine(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + + DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, (void *) buf->addr, size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} + +static void davinci_pcm_free(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + + dma_free_writecombine(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +static u64 davinci_pcm_dmamask = 0xffffffff; + +static int davinci_pcm_new(struct snd_card *card, + struct snd_soc_codec_dai *dai, struct snd_pcm *pcm) +{ + int ret; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &davinci_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = davinci_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + return ret; + } + + if (dai->capture.channels_min) { + ret = davinci_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + return ret; + } + + return 0; +} + +struct snd_soc_platform davinci_soc_platform = { + .name = "davinci-audio", + .pcm_ops = &davinci_pcm_ops, + .pcm_new = davinci_pcm_new, + .pcm_free = davinci_pcm_free, +}; +EXPORT_SYMBOL_GPL(davinci_soc_platform); + +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_DESCRIPTION("TI DAVINCI PCM DMA module"); +MODULE_LICENSE("GPL"); Index: linux-2.6.25-rc1/sound/soc/davinci/davinci-pcm.h =================================================================== --- /dev/null +++ linux-2.6.25-rc1/sound/soc/davinci/davinci-pcm.h @@ -0,0 +1,29 @@ +/* + * ALSA PCM interface for the TI DAVINCI processor + * + * Author: Vladimir Barinov, <vbarinov(a)ru.mvista.com> + * Copyright: (C) 2007 MontaVista Software, Inc., <source(a)mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DAVINCI_PCM_H +#define _DAVINCI_PCM_H + +struct davinci_pcm_dma_params { + char *name; /* stream identifier */ + int channel; /* sync dma channel ID */ + dma_addr_t dma_addr; /* device physical address for DMA */ + unsigned int data_type; /* xfer data type */ +}; + +struct evm_snd_platform_data { + int tx_dma_ch; + int rx_dma_ch; +}; + +extern struct snd_soc_platform davinci_soc_platform; + +#endif Index: linux-2.6.25-rc1/sound/soc/Kconfig =================================================================== --- linux-2.6.25-rc1.orig/sound/soc/Kconfig +++ linux-2.6.25-rc1/sound/soc/Kconfig @@ -29,6 +29,7 @@ source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" source "sound/soc/sh/Kconfig" source "sound/soc/fsl/Kconfig" +source "sound/soc/davinci/Kconfig" # Supported codecs source "sound/soc/codecs/Kconfig" Index: linux-2.6.25-rc1/sound/soc/Makefile =================================================================== --- linux-2.6.25-rc1.orig/sound/soc/Makefile +++ linux-2.6.25-rc1/sound/soc/Makefile @@ -1,4 +1,4 @@ snd-soc-core-objs := soc-core.o soc-dapm.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at91/ pxa/ s3c24xx/ sh/ fsl/ +obj-$(CONFIG_SND_SOC) += codecs/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ Index: linux-2.6.25-rc1/sound/soc/davinci/Kconfig =================================================================== --- /dev/null +++ linux-2.6.25-rc1/sound/soc/davinci/Kconfig @@ -0,0 +1,19 @@ +config SND_DAVINCI_SOC + tristate "SoC Audio for the TI DAVINCI chip" + depends on ARCH_DAVINCI && SND_SOC + help + Say Y or M if you want to add support for codecs attached to + the DAVINCI AC97 or I2S interface. You will also need + to select the audio interfaces to support below. + +config SND_DAVINCI_SOC_I2S + tristate + +config SND_DAVINCI_SOC_EVM + tristate "SoC Audio support for DaVinci EVM" + depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM + select SND_DAVINCI_SOC_I2S + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on TI + DaVinci EVM platform.

3 4

[alsa-devel] alsa-info.sh output with ISA cards (cs4236)
by Nigel Henry 18 Feb '08

18 Feb '08

I've been trying to help someone out on the Fedora list, who has had problems with snd-cs4236 since FC6, where he had to add "modprobe snd-cs4236" to /etc/rc.local to get the module to load. With Fedora 8 the problem got worse, and sound would only work as root. Using a tip from someone else on the list, added lines for sound, and cdrom in /etc/security/console.perms.d/50-default.perms, and the sound now works as user. I asked him to run alsa-info.sh, having got the sound working, but there is very limited output, as below. http://pastebin.ca/903074 The question is, should the script work as well with ISA cards, as it does with PCI ones? Nigel.

2 1

Re: [alsa-devel] Random inverted audio channels
by Mark Brown 18 Feb '08

18 Feb '08

On Mon, Feb 18, 2008 at 09:38:12AM +0100, Alexandre BOUIN wrote: > We are porting a WM8900 driver from a 8731 one. It fit quite well our > requirements and should not be the same as your dev branch. > Sincerely, It didn't know you're working on it. No problem at all - I was just asking from curiosity. > > The most likely issue here is a DMA underrun but from what you say you > > may already have ruled that out? It would be helpful if you could run > > through the debugging you've already done here. > I had traced the addresses sent into PDC (soc/at91-pcm.c), and are always > the same. > What other traces are you looking for ? Have you checked to make sure that the PDC is not reporting any errors?

2 1

Re: [alsa-devel] Random inverted audio channels
by Mark Brown 18 Feb '08

18 Feb '08

On Fri, Feb 15, 2008 at 05:39:49PM +0100, Alexandre BOUIN wrote: > This embedded project includes a AT91SAM9260 CPU and a WM8900 codec. JOOI, is this the WM8900 driver in our dev branch or another one? It shouldn't make any difference either way what driver is used for the codec, though, so long as it is generating the relevant clock signals. > We have an issue : when we play a right channel stereo track, sound is > played on right channel, but sometimes on left. > This issue could happen right after starting kernel, or later after 10-20 > sounds played. > With Frank Mandarino, we've checked any issue from SSC(audio bus) or PDC > (dma) controlers, but no much success. > Any idea to help us debugging this issue would be welcome ! The most likely issue here is a DMA underrun but from what you say you may already have ruled that out? It would be helpful if you could run through the debugging you've already done here. One thing to try if your design allows it would be to try making the CPU the master. That should reduce the number of variables, at least.

2 1

[alsa-devel] 2.6.25-rc2 compile error: 'OPL3_PATCH_HASH_SIZE' undeclared
by George Spelvin 18 Feb '08

18 Feb '08

sound/drivers/opl3/opl3_synth.c:308 sound/drivers/opl3/opl3_synth.c:335 I think it's caused by the fact that I don't have the sequencer enabled. The definition inside include/sound/opl3.h is insdie an #ifdef, but the use is not. CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set

2 2

Re: [alsa-devel] Random inverted audio channels
by Timur Tabi 15 Feb '08

15 Feb '08

Alexandre BOUIN wrote: > We have an issue : when we play a right channel stereo track, sound is > played on right channel, but sometimes on left. > This issue could happen right after starting kernel, or later after 10-20 > sounds played. I've had a similar problem. In my case, the clock from the codec to the chip was unstable. When I attached a 5pF capacitor to it, the clock stabilized and the problem went away. Try using a probe to validate the clock signal. -- Timur Tabi Linux kernel developer at Freescale

1 0

Re: [alsa-devel] Maya44 revised patch
by Takashi Iwai 15 Feb '08

15 Feb '08

At Thu, 14 Feb 2008 17:59:05 +0100, Rainer Zimmermann wrote: > > > > Hi Takashi and Pavel, > > > Takashi Iwai wrote: > >> The constraint comes from the codec, the chip itself can handle 192kHz, > >> e.g. the 192kHz SPDIF input works fine. Actually more of the ice1724 cards > >> have this limit. If this issue is solved in a general way, it could be > >> implemented to other cards with 192kHz DACs/96kHz ADCs too. > > > > Thanks for a quick information. Then, yes, we should fix this issue in > > general. The separate lists of rates for playback and capture would be > > required in the end... > > > > ok. Actually, as Pavel mentioned SPDIF, I guess there should be a third set of > rates for SPDIF, to be used when the appropriate channel is switched to SPDIF. That's a good point. > >>> Anyway, we can limit this in a scenario like below: - disallow the rate > >>> over 96kHz if the capture stream is being opened - if the rate is set > >>> above 96kHz, the capture stream cannot be opened, returns -EBUSY or so. > >>> > > Yes, I was thinking of something along those lines. But 2 possible issues: > > - maybe a stupid question, but couldn't there be some "backdoor"? E.g., could a > playback stream change its rate to above 96kHz while a capture stream is open? > > - In the latter case, I think it should read: "if a playback stream is running > at above 96kHz, the capture stream cannot be opened". Otherwise, e.g. arecord > couldn't open the device if another app left the rate at 192kHz. Yes, the defnial of opening a capture stream over 96kHz is a drawback in this method. > Are there other examples (non-ice17xx) how this is handled? Either setting a fixed rate via a control or disallow-streams-that- don't-support way. > >>> BTW, is it supposed to be still highly experimental? If the driver works > >>> more or less stably with your device (and on the recent kernel), it'd be > >>> also good to put this to the upstream, i.e. in alsa-kernel tree instead > >>> of alsa-driver tree. > > Yes, so far the driver is stable on my system (2.6.22) and on Piotr's, but I > would still consider it experimental. It still contains experimental code and > some experimental controls, and I guess there should be more testing, in > particular the MI/ODI/O and SPDIF part is still untested. > Well, your decision... It's rather your decision at this stage since I have no hardware for testing. I'd just like to mention that merging to the upstream gives more users a chance to try. > As for the vu-meters: > > > Since the meaning of these read-only controls is clear only upon detailed > > study of the driver and Envy24 datasheet plus I encounter a lot of > > questins/complaints about them, I suggest to change their type from MIXER to > > PCM. They would still be readily accessible from amixer or API. > > No objection from my part, but could it break any app software? any other comments? Well, I think it's fine at this moment since we have (still) no envy24control for vt172x. Actually, some other controls are also candidates to hide from the mixer interface. We need a more detailed review in this regard. Takashi

1 0

[alsa-devel] Salsa-lib pcm_link broken
by Matthieu CASTET 15 Feb '08

15 Feb '08

Hi, snd_pcm_link use SNDRV_PCM_IOCTL_UNLINK insted of SNDRV_PCM_IOCTL_LINK. Matthieu

2 1

[alsa-devel] Random inverted audio channels
by Alexandre BOUIN 15 Feb '08

15 Feb '08

Hi alsa-devel list, I'm currently working on an internal project. Here is some details : This embedded project includes a AT91SAM9260 CPU and a WM8900 codec. Audio driver is using ASoC API. Audio data could be either switch from I2S or DSP A, but I prefer the second one. Audio Codec is master. We have an issue : when we play a right channel stereo track, sound is played on right channel, but sometimes on left. This issue could happen right after starting kernel, or later after 10-20 sounds played. With Frank Mandarino, we've checked any issue from SSC(audio bus) or PDC (dma) controlers, but no much success. Any idea to help us debugging this issue would be welcome ! Regards, Alex.

1 0

[alsa-devel] [PATCH] ASoC: WM9713 driver
by Mark Brown 15 Feb '08

15 Feb '08

This patch adds an ASoC driver for the WM9713 AC97 codec. Signed-off-by: Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm9713.c | 1289 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm9713.h | 53 ++ 4 files changed, 1348 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm9713.c create mode 100644 sound/soc/codecs/wm9713.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 898a7d3..3903ab7 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -18,6 +18,10 @@ config SND_SOC_WM9712 tristate depends on SND_SOC +config SND_SOC_WM9713 + tristate + depends on SND_SOC + # Cirrus Logic CS4270 Codec config SND_SOC_CS4270 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index c6e5338..4e1314c 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -3,6 +3,7 @@ snd-soc-wm8731-objs := wm8731.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o snd-soc-wm9712-objs := wm9712.o +snd-soc-wm9713-objs := wm9713.o snd-soc-cs4270-objs := cs4270.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o @@ -11,5 +12,6 @@ obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o +obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c new file mode 100644 index 0000000..c3d0afd --- /dev/null +++ b/sound/soc/codecs/wm9713.c @@ -0,0 +1,1289 @@ +/* + * wm9713.c -- ALSA Soc WM9713 codec support + * + * Copyright 2006 Wolfson Microelectronics PLC. + * Author: Liam Girdwood + * liam.girdwood(a)wolfsonmicro.com or linux(a)wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Revision history + * 4th Feb 2006 Initial version. + * + * Features:- + * + * o Support for AC97 Codec, Voice DAC and Aux DAC + * o Support for DAPM + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/ac97_codec.h> +#include <sound/initval.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "wm9713.h" + +#define WM9713_VERSION "0.15" + +struct wm9713_priv { + u32 pll_in; /* PLL input frequency */ + u32 pll_out; /* PLL output frequency */ +}; + +static unsigned int ac97_read(struct snd_soc_codec *codec, + unsigned int reg); +static int ac97_write(struct snd_soc_codec *codec, + unsigned int reg, unsigned int val); + +/* + * WM9713 register cache + * Reg 0x3c bit 15 is used by touch driver. + */ +static const u16 wm9713_reg[] = { + 0x6174, 0x8080, 0x8080, 0x8080, + 0xc880, 0xe808, 0xe808, 0x0808, + 0x00da, 0x8000, 0xd600, 0xaaa0, + 0xaaa0, 0xaaa0, 0x0000, 0x0000, + 0x0f0f, 0x0040, 0x0000, 0x7f00, + 0x0405, 0x0410, 0xbb80, 0xbb80, + 0x0000, 0xbb80, 0x0000, 0x4523, + 0x0000, 0x2000, 0x7eff, 0xffff, + 0x0000, 0x0000, 0x0080, 0x0000, + 0x0000, 0x0000, 0xfffe, 0xffff, + 0x0000, 0x0000, 0x0000, 0xfffe, + 0x4000, 0x0000, 0x0000, 0x0000, + 0xb032, 0x3e00, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0006, + 0x0001, 0x0000, 0x574d, 0x4c13, + 0x0000, 0x0000, 0x0000 +}; + +/* virtual HP mixers regs */ +#define HPL_MIXER 0x80 +#define HPR_MIXER 0x82 +#define MICB_MUX 0x82 + +static const char *wm9713_mic_mixer[] = {"Stereo", "Mic 1", "Mic 2", "Mute"}; +static const char *wm9713_rec_mux[] = {"Stereo", "Left", "Right", "Mute"}; +static const char *wm9713_rec_src[] = + {"Mic 1", "Mic 2", "Line", "Mono In", "Headphone", "Speaker", + "Mono Out", "Zh"}; +static const char *wm9713_rec_gain[] = {"+1.5dB Steps", "+0.75dB Steps"}; +static const char *wm9713_alc_select[] = {"None", "Left", "Right", "Stereo"}; +static const char *wm9713_mono_pga[] = {"Vmid", "Zh", "Mono", "Inv", + "Mono Vmid", "Inv Vmid"}; +static const char *wm9713_spk_pga[] = + {"Vmid", "Zh", "Headphone", "Speaker", "Inv", "Headphone Vmid", + "Speaker Vmid", "Inv Vmid"}; +static const char *wm9713_hp_pga[] = {"Vmid", "Zh", "Headphone", + "Headphone Vmid"}; +static const char *wm9713_out3_pga[] = {"Vmid", "Zh", "Inv 1", "Inv 1 Vmid"}; +static const char *wm9713_out4_pga[] = {"Vmid", "Zh", "Inv 2", "Inv 2 Vmid"}; +static const char *wm9713_dac_inv[] = + {"Off", "Mono", "Speaker", "Left Headphone", "Right Headphone", + "Headphone Mono", "NC", "Vmid"}; +static const char *wm9713_bass[] = {"Linear Control", "Adaptive Boost"}; +static const char *wm9713_ng_type[] = {"Constant Gain", "Mute"}; +static const char *wm9713_mic_select[] = {"Mic 1", "Mic 2 A", "Mic 2 B"}; +static const char *wm9713_micb_select[] = {"MPB", "MPA"}; + +static const struct soc_enum wm9713_enum[] = { +SOC_ENUM_SINGLE(AC97_LINE, 3, 4, wm9713_mic_mixer), /* record mic mixer 0 */ +SOC_ENUM_SINGLE(AC97_VIDEO, 14, 4, wm9713_rec_mux), /* record mux hp 1 */ +SOC_ENUM_SINGLE(AC97_VIDEO, 9, 4, wm9713_rec_mux), /* record mux mono 2 */ +SOC_ENUM_SINGLE(AC97_VIDEO, 3, 8, wm9713_rec_src), /* record mux left 3 */ +SOC_ENUM_SINGLE(AC97_VIDEO, 0, 8, wm9713_rec_src), /* record mux right 4*/ +SOC_ENUM_DOUBLE(AC97_CD, 14, 6, 2, wm9713_rec_gain), /* record step size 5 */ +SOC_ENUM_SINGLE(AC97_PCI_SVID, 14, 4, wm9713_alc_select), /* alc source select 6*/ +SOC_ENUM_SINGLE(AC97_REC_GAIN, 14, 4, wm9713_mono_pga), /* mono input select 7 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN, 11, 8, wm9713_spk_pga), /* speaker left input select 8 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN, 8, 8, wm9713_spk_pga), /* speaker right input select 9 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN, 6, 3, wm9713_hp_pga), /* headphone left input 10 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN, 4, 3, wm9713_hp_pga), /* headphone right input 11 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN, 2, 4, wm9713_out3_pga), /* out 3 source 12 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN, 0, 4, wm9713_out4_pga), /* out 4 source 13 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN_MIC, 13, 8, wm9713_dac_inv), /* dac invert 1 14 */ +SOC_ENUM_SINGLE(AC97_REC_GAIN_MIC, 10, 8, wm9713_dac_inv), /* dac invert 2 15 */ +SOC_ENUM_SINGLE(AC97_GENERAL_PURPOSE, 15, 2, wm9713_bass), /* bass control 16 */ +SOC_ENUM_SINGLE(AC97_PCI_SVID, 5, 2, wm9713_ng_type), /* noise gate type 17 */ +SOC_ENUM_SINGLE(AC97_3D_CONTROL, 12, 3, wm9713_mic_select), /* mic selection 18 */ +SOC_ENUM_SINGLE(MICB_MUX, 0, 2, wm9713_micb_select), /* mic selection 19 */ +}; + +static const struct snd_kcontrol_new wm9713_snd_ac97_controls[] = { +SOC_DOUBLE("Speaker Playback Volume", AC97_MASTER, 8, 0, 31, 1), +SOC_DOUBLE("Speaker Playback Switch", AC97_MASTER, 15, 7, 1, 1), +SOC_DOUBLE("Headphone Playback Volume", AC97_HEADPHONE, 8, 0, 31, 1), +SOC_DOUBLE("Headphone Playback Switch", AC97_HEADPHONE, 15, 7, 1, 1), +SOC_DOUBLE("Line In Volume", AC97_PC_BEEP, 8, 0, 31, 1), +SOC_DOUBLE("PCM Playback Volume", AC97_PHONE, 8, 0, 31, 1), +SOC_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1), +SOC_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1), + +SOC_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0), +SOC_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1), + +SOC_SINGLE("Capture Switch", AC97_CD, 15, 1, 1), +SOC_ENUM("Capture Volume Steps", wm9713_enum[5]), +SOC_DOUBLE("Capture Volume", AC97_CD, 8, 0, 31, 0), +SOC_SINGLE("Capture ZC Switch", AC97_CD, 7, 1, 0), + +SOC_SINGLE("Capture to Headphone Volume", AC97_VIDEO, 11, 7, 1), +SOC_SINGLE("Capture to Mono Boost (+20dB) Switch", AC97_VIDEO, 8, 1, 0), +SOC_SINGLE("Capture ADC Boost (+20dB) Switch", AC97_VIDEO, 6, 1, 0), + +SOC_SINGLE("ALC Target Volume", AC97_CODEC_CLASS_REV, 12, 15, 0), +SOC_SINGLE("ALC Hold Time", AC97_CODEC_CLASS_REV, 8, 15, 0), +SOC_SINGLE("ALC Decay Time ", AC97_CODEC_CLASS_REV, 4, 15, 0), +SOC_SINGLE("ALC Attack Time", AC97_CODEC_CLASS_REV, 0, 15, 0), +SOC_ENUM("ALC Function", wm9713_enum[6]), +SOC_SINGLE("ALC Max Volume", AC97_PCI_SVID, 11, 7, 0), +SOC_SINGLE("ALC ZC Timeout", AC97_PCI_SVID, 9, 3, 0), +SOC_SINGLE("ALC ZC Switch", AC97_PCI_SVID, 8, 1, 0), +SOC_SINGLE("ALC NG Switch", AC97_PCI_SVID, 7, 1, 0), +SOC_ENUM("ALC NG Type", wm9713_enum[17]), +SOC_SINGLE("ALC NG Threshold", AC97_PCI_SVID, 0, 31, 0), + +SOC_DOUBLE("Speaker Playback ZC Switch", AC97_MASTER, 14, 6, 1, 0), +SOC_DOUBLE("Headphone Playback ZC Switch", AC97_HEADPHONE, 14, 6, 1, 0), + +SOC_SINGLE("Out4 Playback Switch", AC97_MASTER_MONO, 15, 1, 1), +SOC_SINGLE("Out4 Playback ZC Switch", AC97_MASTER_MONO, 14, 1, 0), +SOC_SINGLE("Out4 Playback Volume", AC97_MASTER_MONO, 8, 63, 1), + +SOC_SINGLE("Out3 Playback Switch", AC97_MASTER_MONO, 7, 1, 1), +SOC_SINGLE("Out3 Playback ZC Switch", AC97_MASTER_MONO, 6, 1, 0), +SOC_SINGLE("Out3 Playback Volume", AC97_MASTER_MONO, 0, 63, 1), + +SOC_SINGLE("Mono Capture Volume", AC97_MASTER_TONE, 8, 31, 1), +SOC_SINGLE("Mono Playback Switch", AC97_MASTER_TONE, 7, 1, 1), +SOC_SINGLE("Mono Playback ZC Switch", AC97_MASTER_TONE, 6, 1, 0), +SOC_SINGLE("Mono Playback Volume", AC97_MASTER_TONE, 0, 31, 1), + +SOC_SINGLE("PC Beep Playback Headphone Volume", AC97_AUX, 12, 7, 1), +SOC_SINGLE("PC Beep Playback Speaker Volume", AC97_AUX, 8, 7, 1), +SOC_SINGLE("PC Beep Playback Mono Volume", AC97_AUX, 4, 7, 1), + +SOC_SINGLE("Voice Playback Headphone Volume", AC97_PCM, 12, 7, 1), +SOC_SINGLE("Voice Playback Master Volume", AC97_PCM, 8, 7, 1), +SOC_SINGLE("Voice Playback Mono Volume", AC97_PCM, 4, 7, 1), + +SOC_SINGLE("Aux Playback Headphone Volume", AC97_REC_SEL, 12, 7, 1), +SOC_SINGLE("Aux Playback Master Volume", AC97_REC_SEL, 8, 7, 1), +SOC_SINGLE("Aux Playback Mono Volume", AC97_REC_SEL, 4, 7, 1), + +SOC_ENUM("Bass Control", wm9713_enum[16]), +SOC_SINGLE("Bass Cut-off Switch", AC97_GENERAL_PURPOSE, 12, 1, 1), +SOC_SINGLE("Tone Cut-off Switch", AC97_GENERAL_PURPOSE, 4, 1, 1), +SOC_SINGLE("Playback Attenuate (-6dB) Switch", AC97_GENERAL_PURPOSE, 6, 1, 0), +SOC_SINGLE("Bass Volume", AC97_GENERAL_PURPOSE, 8, 15, 1), +SOC_SINGLE("Tone Volume", AC97_GENERAL_PURPOSE, 0, 15, 1), + +SOC_SINGLE("3D Upper Cut-off Switch", AC97_REC_GAIN_MIC, 5, 1, 0), +SOC_SINGLE("3D Lower Cut-off Switch", AC97_REC_GAIN_MIC, 4, 1, 0), +SOC_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1), +}; + +/* add non dapm controls */ +static int wm9713_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm9713_snd_ac97_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&wm9713_snd_ac97_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + return 0; +} + +/* We have to create a fake left and right HP mixers because + * the codec only has a single control that is shared by both channels. + * This makes it impossible to determine the audio path using the current + * register map, thus we add a new (virtual) register to help determine the + * audio route within the device. + */ +static int mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + u16 l, r, beep, tone, phone, rec, pcm, aux; + + l = ac97_read(w->codec, HPL_MIXER); + r = ac97_read(w->codec, HPR_MIXER); + beep = ac97_read(w->codec, AC97_PC_BEEP); + tone = ac97_read(w->codec, AC97_MASTER_TONE); + phone = ac97_read(w->codec, AC97_PHONE); + rec = ac97_read(w->codec, AC97_REC_SEL); + pcm = ac97_read(w->codec, AC97_PCM); + aux = ac97_read(w->codec, AC97_AUX); + + if (event & SND_SOC_DAPM_PRE_REG) + return 0; + if ((l & 0x1) || (r & 0x1)) + ac97_write(w->codec, AC97_PC_BEEP, beep & 0x7fff); + else + ac97_write(w->codec, AC97_PC_BEEP, beep | 0x8000); + + if ((l & 0x2) || (r & 0x2)) + ac97_write(w->codec, AC97_MASTER_TONE, tone & 0x7fff); + else + ac97_write(w->codec, AC97_MASTER_TONE, tone | 0x8000); + + if ((l & 0x4) || (r & 0x4)) + ac97_write(w->codec, AC97_PHONE, phone & 0x7fff); + else + ac97_write(w->codec, AC97_PHONE, phone | 0x8000); + + if ((l & 0x8) || (r & 0x8)) + ac97_write(w->codec, AC97_REC_SEL, rec & 0x7fff); + else + ac97_write(w->codec, AC97_REC_SEL, rec | 0x8000); + + if ((l & 0x10) || (r & 0x10)) + ac97_write(w->codec, AC97_PCM, pcm & 0x7fff); + else + ac97_write(w->codec, AC97_PCM, pcm | 0x8000); + + if ((l & 0x20) || (r & 0x20)) + ac97_write(w->codec, AC97_AUX, aux & 0x7fff); + else + ac97_write(w->codec, AC97_AUX, aux | 0x8000); + + return 0; +} + +/* Left Headphone Mixers */ +static const struct snd_kcontrol_new wm9713_hpl_mixer_controls[] = { +SOC_DAPM_SINGLE("PC Beep Playback Switch", HPL_MIXER, 5, 1, 0), +SOC_DAPM_SINGLE("Voice Playback Switch", HPL_MIXER, 4, 1, 0), +SOC_DAPM_SINGLE("Aux Playback Switch", HPL_MIXER, 3, 1, 0), +SOC_DAPM_SINGLE("PCM Playback Switch", HPL_MIXER, 2, 1, 0), +SOC_DAPM_SINGLE("MonoIn Playback Switch", HPL_MIXER, 1, 1, 0), +SOC_DAPM_SINGLE("Bypass Playback Switch", HPL_MIXER, 0, 1, 0), +}; + +/* Right Headphone Mixers */ +static const struct snd_kcontrol_new wm9713_hpr_mixer_controls[] = { +SOC_DAPM_SINGLE("PC Beep Playback Switch", HPR_MIXER, 5, 1, 0), +SOC_DAPM_SINGLE("Voice Playback Switch", HPR_MIXER, 4, 1, 0), +SOC_DAPM_SINGLE("Aux Playback Switch", HPR_MIXER, 3, 1, 0), +SOC_DAPM_SINGLE("PCM Playback Switch", HPR_MIXER, 2, 1, 0), +SOC_DAPM_SINGLE("MonoIn Playback Switch", HPR_MIXER, 1, 1, 0), +SOC_DAPM_SINGLE("Bypass Playback Switch", HPR_MIXER, 0, 1, 0), +}; + +/* headphone capture mux */ +static const struct snd_kcontrol_new wm9713_hp_rec_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[1]); + +/* headphone mic mux */ +static const struct snd_kcontrol_new wm9713_hp_mic_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[0]); + +/* Speaker Mixer */ +static const struct snd_kcontrol_new wm9713_speaker_mixer_controls[] = { +SOC_DAPM_SINGLE("PC Beep Playback Switch", AC97_AUX, 11, 1, 1), +SOC_DAPM_SINGLE("Voice Playback Switch", AC97_PCM, 11, 1, 1), +SOC_DAPM_SINGLE("Aux Playback Switch", AC97_REC_SEL, 11, 1, 1), +SOC_DAPM_SINGLE("PCM Playback Switch", AC97_PHONE, 14, 1, 1), +SOC_DAPM_SINGLE("MonoIn Playback Switch", AC97_MASTER_TONE, 14, 1, 1), +SOC_DAPM_SINGLE("Bypass Playback Switch", AC97_PC_BEEP, 14, 1, 1), +}; + +/* Mono Mixer */ +static const struct snd_kcontrol_new wm9713_mono_mixer_controls[] = { +SOC_DAPM_SINGLE("PC Beep Playback Switch", AC97_AUX, 7, 1, 1), +SOC_DAPM_SINGLE("Voice Playback Switch", AC97_PCM, 7, 1, 1), +SOC_DAPM_SINGLE("Aux Playback Switch", AC97_REC_SEL, 7, 1, 1), +SOC_DAPM_SINGLE("PCM Playback Switch", AC97_PHONE, 13, 1, 1), +SOC_DAPM_SINGLE("MonoIn Playback Switch", AC97_MASTER_TONE, 13, 1, 1), +SOC_DAPM_SINGLE("Bypass Playback Switch", AC97_PC_BEEP, 13, 1, 1), +SOC_DAPM_SINGLE("Mic 1 Sidetone Switch", AC97_LINE, 7, 1, 1), +SOC_DAPM_SINGLE("Mic 2 Sidetone Switch", AC97_LINE, 6, 1, 1), +}; + +/* mono mic mux */ +static const struct snd_kcontrol_new wm9713_mono_mic_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[2]); + +/* mono output mux */ +static const struct snd_kcontrol_new wm9713_mono_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[7]); + +/* speaker left output mux */ +static const struct snd_kcontrol_new wm9713_hp_spkl_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[8]); + +/* speaker right output mux */ +static const struct snd_kcontrol_new wm9713_hp_spkr_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[9]); + +/* headphone left output mux */ +static const struct snd_kcontrol_new wm9713_hpl_out_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[10]); + +/* headphone right output mux */ +static const struct snd_kcontrol_new wm9713_hpr_out_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[11]); + +/* Out3 mux */ +static const struct snd_kcontrol_new wm9713_out3_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[12]); + +/* Out4 mux */ +static const struct snd_kcontrol_new wm9713_out4_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[13]); + +/* DAC inv mux 1 */ +static const struct snd_kcontrol_new wm9713_dac_inv1_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[14]); + +/* DAC inv mux 2 */ +static const struct snd_kcontrol_new wm9713_dac_inv2_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[15]); + +/* Capture source left */ +static const struct snd_kcontrol_new wm9713_rec_srcl_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[3]); + +/* Capture source right */ +static const struct snd_kcontrol_new wm9713_rec_srcr_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[4]); + +/* mic source */ +static const struct snd_kcontrol_new wm9713_mic_sel_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[18]); + +/* mic source B virtual control */ +static const struct snd_kcontrol_new wm9713_micb_sel_mux_controls = +SOC_DAPM_ENUM("Route", wm9713_enum[19]); + +static const struct snd_soc_dapm_widget wm9713_dapm_widgets[] = { +SND_SOC_DAPM_MUX("Capture Headphone Mux", SND_SOC_NOPM, 0, 0, + &wm9713_hp_rec_mux_controls), +SND_SOC_DAPM_MUX("Sidetone Mux", SND_SOC_NOPM, 0, 0, + &wm9713_hp_mic_mux_controls), +SND_SOC_DAPM_MUX("Capture Mono Mux", SND_SOC_NOPM, 0, 0, + &wm9713_mono_mic_mux_controls), +SND_SOC_DAPM_MUX("Mono Out Mux", SND_SOC_NOPM, 0, 0, + &wm9713_mono_mux_controls), +SND_SOC_DAPM_MUX("Left Speaker Out Mux", SND_SOC_NOPM, 0, 0, + &wm9713_hp_spkl_mux_controls), +SND_SOC_DAPM_MUX("Right Speaker Out Mux", SND_SOC_NOPM, 0, 0, + &wm9713_hp_spkr_mux_controls), +SND_SOC_DAPM_MUX("Left Headphone Out Mux", SND_SOC_NOPM, 0, 0, + &wm9713_hpl_out_mux_controls), +SND_SOC_DAPM_MUX("Right Headphone Out Mux", SND_SOC_NOPM, 0, 0, + &wm9713_hpr_out_mux_controls), +SND_SOC_DAPM_MUX("Out 3 Mux", SND_SOC_NOPM, 0, 0, + &wm9713_out3_mux_controls), +SND_SOC_DAPM_MUX("Out 4 Mux", SND_SOC_NOPM, 0, 0, + &wm9713_out4_mux_controls), +SND_SOC_DAPM_MUX("DAC Inv Mux 1", SND_SOC_NOPM, 0, 0, + &wm9713_dac_inv1_mux_controls), +SND_SOC_DAPM_MUX("DAC Inv Mux 2", SND_SOC_NOPM, 0, 0, + &wm9713_dac_inv2_mux_controls), +SND_SOC_DAPM_MUX("Left Capture Source", SND_SOC_NOPM, 0, 0, + &wm9713_rec_srcl_mux_controls), +SND_SOC_DAPM_MUX("Right Capture Source", SND_SOC_NOPM, 0, 0, + &wm9713_rec_srcr_mux_controls), +SND_SOC_DAPM_MUX("Mic A Source", SND_SOC_NOPM, 0, 0, + &wm9713_mic_sel_mux_controls), +SND_SOC_DAPM_MUX("Mic B Source", SND_SOC_NOPM, 0, 0, + &wm9713_micb_sel_mux_controls), +SND_SOC_DAPM_MIXER_E("Left HP Mixer", AC97_EXTENDED_MID, 3, 1, + &wm9713_hpl_mixer_controls[0], ARRAY_SIZE(wm9713_hpl_mixer_controls), + mixer_event, SND_SOC_DAPM_POST_REG), +SND_SOC_DAPM_MIXER_E("Right HP Mixer", AC97_EXTENDED_MID, 2, 1, + &wm9713_hpr_mixer_controls[0], ARRAY_SIZE(wm9713_hpr_mixer_controls), + mixer_event, SND_SOC_DAPM_POST_REG), +SND_SOC_DAPM_MIXER("Mono Mixer", AC97_EXTENDED_MID, 0, 1, + &wm9713_mono_mixer_controls[0], ARRAY_SIZE(wm9713_mono_mixer_controls)), +SND_SOC_DAPM_MIXER("Speaker Mixer", AC97_EXTENDED_MID, 1, 1, + &wm9713_speaker_mixer_controls[0], + ARRAY_SIZE(wm9713_speaker_mixer_controls)), +SND_SOC_DAPM_DAC("Left DAC", "Left HiFi Playback", AC97_EXTENDED_MID, 7, 1), +SND_SOC_DAPM_DAC("Right DAC", "Right HiFi Playback", AC97_EXTENDED_MID, 6, 1), +SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("HP Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("Line Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_MIXER("Capture Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1), +SND_SOC_DAPM_DAC("Aux DAC", "Aux Playback", AC97_EXTENDED_MID, 11, 1), +SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture", AC97_EXTENDED_MID, 5, 1), +SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture", AC97_EXTENDED_MID, 4, 1), +SND_SOC_DAPM_PGA("Left Headphone", AC97_EXTENDED_MSTATUS, 10, 1, NULL, 0), +SND_SOC_DAPM_PGA("Right Headphone", AC97_EXTENDED_MSTATUS, 9, 1, NULL, 0), +SND_SOC_DAPM_PGA("Left Speaker", AC97_EXTENDED_MSTATUS, 8, 1, NULL, 0), +SND_SOC_DAPM_PGA("Right Speaker", AC97_EXTENDED_MSTATUS, 7, 1, NULL, 0), +SND_SOC_DAPM_PGA("Out 3", AC97_EXTENDED_MSTATUS, 11, 1, NULL, 0), +SND_SOC_DAPM_PGA("Out 4", AC97_EXTENDED_MSTATUS, 12, 1, NULL, 0), +SND_SOC_DAPM_PGA("Mono Out", AC97_EXTENDED_MSTATUS, 13, 1, NULL, 0), +SND_SOC_DAPM_PGA("Left Line In", AC97_EXTENDED_MSTATUS, 6, 1, NULL, 0), +SND_SOC_DAPM_PGA("Right Line In", AC97_EXTENDED_MSTATUS, 5, 1, NULL, 0), +SND_SOC_DAPM_PGA("Mono In", AC97_EXTENDED_MSTATUS, 4, 1, NULL, 0), +SND_SOC_DAPM_PGA("Mic A PGA", AC97_EXTENDED_MSTATUS, 3, 1, NULL, 0), +SND_SOC_DAPM_PGA("Mic B PGA", AC97_EXTENDED_MSTATUS, 2, 1, NULL, 0), +SND_SOC_DAPM_PGA("Mic A Pre Amp", AC97_EXTENDED_MSTATUS, 1, 1, NULL, 0), +SND_SOC_DAPM_PGA("Mic B Pre Amp", AC97_EXTENDED_MSTATUS, 0, 1, NULL, 0), +SND_SOC_DAPM_MICBIAS("Mic Bias", AC97_EXTENDED_MSTATUS, 14, 1), +SND_SOC_DAPM_OUTPUT("MONO"), +SND_SOC_DAPM_OUTPUT("HPL"), +SND_SOC_DAPM_OUTPUT("HPR"), +SND_SOC_DAPM_OUTPUT("SPKL"), +SND_SOC_DAPM_OUTPUT("SPKR"), +SND_SOC_DAPM_OUTPUT("OUT3"), +SND_SOC_DAPM_OUTPUT("OUT4"), +SND_SOC_DAPM_INPUT("LINEL"), +SND_SOC_DAPM_INPUT("LINER"), +SND_SOC_DAPM_INPUT("MONOIN"), +SND_SOC_DAPM_INPUT("PCBEEP"), +SND_SOC_DAPM_INPUT("MIC1"), +SND_SOC_DAPM_INPUT("MIC2A"), +SND_SOC_DAPM_INPUT("MIC2B"), +SND_SOC_DAPM_VMID("VMID"), +}; + +static const char *audio_map[][3] = { + /* left HP mixer */ + {"Left HP Mixer", "PC Beep Playback Switch", "PCBEEP"}, + {"Left HP Mixer", "Voice Playback Switch", "Voice DAC"}, + {"Left HP Mixer", "Aux Playback Switch", "Aux DAC"}, + {"Left HP Mixer", "Bypass Playback Switch", "Left Line In"}, + {"Left HP Mixer", "PCM Playback Switch", "Left DAC"}, + {"Left HP Mixer", "MonoIn Playback Switch", "Mono In"}, + {"Left HP Mixer", NULL, "Capture Headphone Mux"}, + + /* right HP mixer */ + {"Right HP Mixer", "PC Beep Playback Switch", "PCBEEP"}, + {"Right HP Mixer", "Voice Playback Switch", "Voice DAC"}, + {"Right HP Mixer", "Aux Playback Switch", "Aux DAC"}, + {"Right HP Mixer", "Bypass Playback Switch", "Right Line In"}, + {"Right HP Mixer", "PCM Playback Switch", "Right DAC"}, + {"Right HP Mixer", "MonoIn Playback Switch", "Mono In"}, + {"Right HP Mixer", NULL, "Capture Headphone Mux"}, + + /* virtual mixer - mixes left & right channels for spk and mono */ + {"AC97 Mixer", NULL, "Left DAC"}, + {"AC97 Mixer", NULL, "Right DAC"}, + {"Line Mixer", NULL, "Right Line In"}, + {"Line Mixer", NULL, "Left Line In"}, + {"HP Mixer", NULL, "Left HP Mixer"}, + {"HP Mixer", NULL, "Right HP Mixer"}, + {"Capture Mixer", NULL, "Left Capture Source"}, + {"Capture Mixer", NULL, "Right Capture Source"}, + + /* speaker mixer */ + {"Speaker Mixer", "PC Beep Playback Switch", "PCBEEP"}, + {"Speaker Mixer", "Voice Playback Switch", "Voice DAC"}, + {"Speaker Mixer", "Aux Playback Switch", "Aux DAC"}, + {"Speaker Mixer", "Bypass Playback Switch", "Line Mixer"}, + {"Speaker Mixer", "PCM Playback Switch", "AC97 Mixer"}, + {"Speaker Mixer", "MonoIn Playback Switch", "Mono In"}, + + /* mono mixer */ + {"Mono Mixer", "PC Beep Playback Switch", "PCBEEP"}, + {"Mono Mixer", "Voice Playback Switch", "Voice DAC"}, + {"Mono Mixer", "Aux Playback Switch", "Aux DAC"}, + {"Mono Mixer", "Bypass Playback Switch", "Line Mixer"}, + {"Mono Mixer", "PCM Playback Switch", "AC97 Mixer"}, + {"Mono Mixer", NULL, "Capture Mono Mux"}, + + /* DAC inv mux 1 */ + {"DAC Inv Mux 1", "Mono", "Mono Mixer"}, + {"DAC Inv Mux 1", "Speaker", "Speaker Mixer"}, + {"DAC Inv Mux 1", "Left Headphone", "Left HP Mixer"}, + {"DAC Inv Mux 1", "Right Headphone", "Right HP Mixer"}, + {"DAC Inv Mux 1", "Headphone Mono", "HP Mixer"}, + + /* DAC inv mux 2 */ + {"DAC Inv Mux 2", "Mono", "Mono Mixer"}, + {"DAC Inv Mux 2", "Speaker", "Speaker Mixer"}, + {"DAC Inv Mux 2", "Left Headphone", "Left HP Mixer"}, + {"DAC Inv Mux 2", "Right Headphone", "Right HP Mixer"}, + {"DAC Inv Mux 2", "Headphone Mono", "HP Mixer"}, + + /* headphone left mux */ + {"Left Headphone Out Mux", "Headphone", "Left HP Mixer"}, + + /* headphone right mux */ + {"Right Headphone Out Mux", "Headphone", "Right HP Mixer"}, + + /* speaker left mux */ + {"Left Speaker Out Mux", "Headphone", "Left HP Mixer"}, + {"Left Speaker Out Mux", "Speaker", "Speaker Mixer"}, + {"Left Speaker Out Mux", "Inv", "DAC Inv Mux 1"}, + + /* speaker right mux */ + {"Right Speaker Out Mux", "Headphone", "Right HP Mixer"}, + {"Right Speaker Out Mux", "Speaker", "Speaker Mixer"}, + {"Right Speaker Out Mux", "Inv", "DAC Inv Mux 2"}, + + /* mono mux */ + {"Mono Out Mux", "Mono", "Mono Mixer"}, + {"Mono Out Mux", "Inv", "DAC Inv Mux 1"}, + + /* out 3 mux */ + {"Out 3 Mux", "Inv 1", "DAC Inv Mux 1"}, + + /* out 4 mux */ + {"Out 4 Mux", "Inv 2", "DAC Inv Mux 2"}, + + /* output pga */ + {"HPL", NULL, "Left Headphone"}, + {"Left Headphone", NULL, "Left Headphone Out Mux"}, + {"HPR", NULL, "Right Headphone"}, + {"Right Headphone", NULL, "Right Headphone Out Mux"}, + {"OUT3", NULL, "Out 3"}, + {"Out 3", NULL, "Out 3 Mux"}, + {"OUT4", NULL, "Out 4"}, + {"Out 4", NULL, "Out 4 Mux"}, + {"SPKL", NULL, "Left Speaker"}, + {"Left Speaker", NULL, "Left Speaker Out Mux"}, + {"SPKR", NULL, "Right Speaker"}, + {"Right Speaker", NULL, "Right Speaker Out Mux"}, + {"MONO", NULL, "Mono Out"}, + {"Mono Out", NULL, "Mono Out Mux"}, + + /* input pga */ + {"Left Line In", NULL, "LINEL"}, + {"Right Line In", NULL, "LINER"}, + {"Mono In", NULL, "MONOIN"}, + {"Mic A PGA", NULL, "Mic A Pre Amp"}, + {"Mic B PGA", NULL, "Mic B Pre Amp"}, + + /* left capture select */ + {"Left Capture Source", "Mic 1", "Mic A Pre Amp"}, + {"Left Capture Source", "Mic 2", "Mic B Pre Amp"}, + {"Left Capture Source", "Line", "LINEL"}, + {"Left Capture Source", "Mono In", "MONOIN"}, + {"Left Capture Source", "Headphone", "Left HP Mixer"}, + {"Left Capture Source", "Speaker", "Speaker Mixer"}, + {"Left Capture Source", "Mono Out", "Mono Mixer"}, + + /* right capture select */ + {"Right Capture Source", "Mic 1", "Mic A Pre Amp"}, + {"Right Capture Source", "Mic 2", "Mic B Pre Amp"}, + {"Right Capture Source", "Line", "LINER"}, + {"Right Capture Source", "Mono In", "MONOIN"}, + {"Right Capture Source", "Headphone", "Right HP Mixer"}, + {"Right Capture Source", "Speaker", "Speaker Mixer"}, + {"Right Capture Source", "Mono Out", "Mono Mixer"}, + + /* left ADC */ + {"Left ADC", NULL, "Left Capture Source"}, + + /* right ADC */ + {"Right ADC", NULL, "Right Capture Source"}, + + /* mic */ + {"Mic A Pre Amp", NULL, "Mic A Source"}, + {"Mic A Source", "Mic 1", "MIC1"}, + {"Mic A Source", "Mic 2 A", "MIC2A"}, + {"Mic A Source", "Mic 2 B", "Mic B Source"}, + {"Mic B Pre Amp", "MPB", "Mic B Source"}, + {"Mic B Source", NULL, "MIC2B"}, + + /* headphone capture */ + {"Capture Headphone Mux", "Stereo", "Capture Mixer"}, + {"Capture Headphone Mux", "Left", "Left Capture Source"}, + {"Capture Headphone Mux", "Right", "Right Capture Source"}, + + /* mono capture */ + {"Capture Mono Mux", "Stereo", "Capture Mixer"}, + {"Capture Mono Mux", "Left", "Left Capture Source"}, + {"Capture Mono Mux", "Right", "Right Capture Source"}, + + {NULL, NULL, NULL}, +}; + +static int wm9713_add_widgets(struct snd_soc_codec *codec) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(wm9713_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &wm9713_dapm_widgets[i]); + + /* set up audio path audio_mapnects */ + for (i = 0; audio_map[i][0] != NULL; i++) + snd_soc_dapm_connect_input(codec, audio_map[i][0], + audio_map[i][1], audio_map[i][2]); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static unsigned int ac97_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + if (reg == AC97_RESET || reg == AC97_GPIO_STATUS || + reg == AC97_VENDOR_ID1 || reg == AC97_VENDOR_ID2 || + reg == AC97_CD) + return soc_ac97_ops.read(codec->ac97, reg); + else { + reg = reg >> 1; + + if (reg > (ARRAY_SIZE(wm9713_reg))) + return -EIO; + + return cache[reg]; + } +} + +static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int val) +{ + u16 *cache = codec->reg_cache; + if (reg < 0x7c) + soc_ac97_ops.write(codec->ac97, reg, val); + reg = reg >> 1; + if (reg <= (ARRAY_SIZE(wm9713_reg))) + cache[reg] = val; + + return 0; +} + +/* PLL divisors */ +struct _pll_div { + u32 divsel:1; + u32 divctl:1; + u32 lf:1; + u32 n:4; + u32 k:24; +}; + +/* The size in bits of the PLL divide multiplied by 10 + * to allow rounding later */ +#define FIXED_PLL_SIZE ((1 << 22) * 10) + +static void pll_factors(struct _pll_div *pll_div, unsigned int source) +{ + u64 Kpart; + unsigned int K, Ndiv, Nmod, target; + + /* The the PLL output is always 98.304MHz. */ + target = 98304000; + + /* If the input frequency is over 14.4MHz then scale it down. */ + if (source > 14400000) { + source >>= 1; + pll_div->divsel = 1; + + if (source > 14400000) { + source >>= 1; + pll_div->divctl = 1; + } else + pll_div->divctl = 0; + + } else { + pll_div->divsel = 0; + pll_div->divctl = 0; + } + + /* Low frequency sources require an additional divide in the + * loop. + */ + if (source < 8192000) { + pll_div->lf = 1; + target >>= 2; + } else + pll_div->lf = 0; + + Ndiv = target / source; + if ((Ndiv < 5) || (Ndiv > 12)) + printk(KERN_WARNING + "WM9713 PLL N value %d out of recommended range!\n", + Ndiv); + + pll_div->n = Ndiv; + Nmod = target % source; + Kpart = FIXED_PLL_SIZE * (long long)Nmod; + + do_div(Kpart, source); + + K = Kpart & 0xFFFFFFFF; + + /* Check if we need to round */ + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + K /= 10; + + pll_div->k = K; +} + +/** + * Please note that changing the PLL input frequency may require + * resynchronisation with the AC97 controller. + */ +static int wm9713_set_pll(struct snd_soc_codec *codec, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct wm9713_priv *wm9713 = codec->private_data; + u16 reg, reg2; + struct _pll_div pll_div; + + /* turn PLL off ? */ + if (freq_in == 0 || freq_out == 0) { + /* disable PLL power and select ext source */ + reg = ac97_read(codec, AC97_HANDSET_RATE); + ac97_write(codec, AC97_HANDSET_RATE, reg | 0x0080); + reg = ac97_read(codec, AC97_EXTENDED_MID); + ac97_write(codec, AC97_EXTENDED_MID, reg | 0x0200); + wm9713->pll_out = 0; + return 0; + } + + pll_factors(&pll_div, freq_in); + + if (pll_div.k == 0) { + reg = (pll_div.n << 12) | (pll_div.lf << 11) | + (pll_div.divsel << 9) | (pll_div.divctl << 8); + ac97_write(codec, AC97_LINE1_LEVEL, reg); + } else { + /* write the fractional k to the reg 0x46 pages */ + reg2 = (pll_div.n << 12) | (pll_div.lf << 11) | (1 << 10) | + (pll_div.divsel << 9) | (pll_div.divctl << 8); + + /* K [21:20] */ + reg = reg2 | (0x5 << 4) | (pll_div.k >> 20); + ac97_write(codec, AC97_LINE1_LEVEL, reg); + + /* K [19:16] */ + reg = reg2 | (0x4 << 4) | ((pll_div.k >> 16) & 0xf); + ac97_write(codec, AC97_LINE1_LEVEL, reg); + + /* K [15:12] */ + reg = reg2 | (0x3 << 4) | ((pll_div.k >> 12) & 0xf); + ac97_write(codec, AC97_LINE1_LEVEL, reg); + + /* K [11:8] */ + reg = reg2 | (0x2 << 4) | ((pll_div.k >> 8) & 0xf); + ac97_write(codec, AC97_LINE1_LEVEL, reg); + + /* K [7:4] */ + reg = reg2 | (0x1 << 4) | ((pll_div.k >> 4) & 0xf); + ac97_write(codec, AC97_LINE1_LEVEL, reg); + + reg = reg2 | (0x0 << 4) | (pll_div.k & 0xf); /* K [3:0] */ + ac97_write(codec, AC97_LINE1_LEVEL, reg); + } + + /* turn PLL on and select as source */ + reg = ac97_read(codec, AC97_EXTENDED_MID); + ac97_write(codec, AC97_EXTENDED_MID, reg & 0xfdff); + reg = ac97_read(codec, AC97_HANDSET_RATE); + ac97_write(codec, AC97_HANDSET_RATE, reg & 0xff7f); + wm9713->pll_out = freq_out; + wm9713->pll_in = freq_in; + + /* wait 10ms AC97 link frames for the link to stabilise */ + schedule_timeout_interruptible(msecs_to_jiffies(10)); + return 0; +} + +static int wm9713_set_dai_pll(struct snd_soc_codec_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + return wm9713_set_pll(codec, pll_id, freq_in, freq_out); +} + +/* + * Tristate the PCM DAI lines, tristate can be disabled by calling + * wm9713_set_dai_fmt() + */ +static int wm9713_set_dai_tristate(struct snd_soc_codec_dai *codec_dai, + int tristate) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg = ac97_read(codec, AC97_CENTER_LFE_MASTER) & 0x9fff; + + if (tristate) + ac97_write(codec, AC97_CENTER_LFE_MASTER, reg); + + return 0; +} + +/* + * Configure WM9713 clock dividers. + * Voice DAC needs 256 FS + */ +static int wm9713_set_dai_clkdiv(struct snd_soc_codec_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + switch (div_id) { + case WM9713_PCMCLK_DIV: + reg = ac97_read(codec, AC97_HANDSET_RATE) & 0xf0ff; + ac97_write(codec, AC97_HANDSET_RATE, reg | div); + break; + case WM9713_CLKA_MULT: + reg = ac97_read(codec, AC97_HANDSET_RATE) & 0xfffd; + ac97_write(codec, AC97_HANDSET_RATE, reg | div); + break; + case WM9713_CLKB_MULT: + reg = ac97_read(codec, AC97_HANDSET_RATE) & 0xfffb; + ac97_write(codec, AC97_HANDSET_RATE, reg | div); + break; + case WM9713_HIFI_DIV: + reg = ac97_read(codec, AC97_HANDSET_RATE) & 0x8fff; + ac97_write(codec, AC97_HANDSET_RATE, reg | div); + break; + case WM9713_PCMBCLK_DIV: + reg = ac97_read(codec, AC97_CENTER_LFE_MASTER) & 0xf1ff; + ac97_write(codec, AC97_CENTER_LFE_MASTER, reg | div); + break; + case WM9713_PCMCLK_PLL_DIV: + reg = ac97_read(codec, AC97_LINE1_LEVEL) & 0xff80; + ac97_write(codec, AC97_LINE1_LEVEL, reg | 0x60 | div); + break; + case WM9713_HIFI_PLL_DIV: + reg = ac97_read(codec, AC97_LINE1_LEVEL) & 0xff80; + ac97_write(codec, AC97_LINE1_LEVEL, reg | 0x70 | div); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int wm9713_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 gpio = ac97_read(codec, AC97_GPIO_CFG) & 0xffc5; + u16 reg = 0x8000; + + /* clock masters */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + reg |= 0x4000; + gpio |= 0x0010; + break; + case SND_SOC_DAIFMT_CBM_CFS: + reg |= 0x6000; + gpio |= 0x0018; + break; + case SND_SOC_DAIFMT_CBS_CFS: + reg |= 0x0200; + gpio |= 0x001a; + break; + case SND_SOC_DAIFMT_CBS_CFM: + gpio |= 0x0012; + break; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_IF: + reg |= 0x00c0; + break; + case SND_SOC_DAIFMT_IB_NF: + reg |= 0x0080; + break; + case SND_SOC_DAIFMT_NB_IF: + reg |= 0x0040; + break; + } + + /* DAI format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + reg |= 0x0002; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + reg |= 0x0001; + break; + case SND_SOC_DAIFMT_DSP_A: + reg |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + reg |= 0x0043; + break; + } + + ac97_write(codec, AC97_GPIO_CFG, gpio); + ac97_write(codec, AC97_CENTER_LFE_MASTER, reg); + return 0; +} + +static int wm9713_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 reg = ac97_read(codec, AC97_CENTER_LFE_MASTER) & 0xfff3; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + reg |= 0x0004; + break; + case SNDRV_PCM_FORMAT_S24_LE: + reg |= 0x0008; + break; + case SNDRV_PCM_FORMAT_S32_LE: + reg |= 0x000c; + break; + } + + /* enable PCM interface in master mode */ + ac97_write(codec, AC97_CENTER_LFE_MASTER, reg); + return 0; +} + +static void wm9713_voiceshutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 status; + + /* Gracefully shut down the voice interface. */ + status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000; + ac97_write(codec, AC97_HANDSET_RATE, 0x0280); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + ac97_write(codec, AC97_HANDSET_RATE, 0x0F80); + ac97_write(codec, AC97_EXTENDED_MID, status); +} + +static int ac97_hifi_prepare(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + int reg; + u16 vra; + + vra = ac97_read(codec, AC97_EXTENDED_STATUS); + ac97_write(codec, AC97_EXTENDED_STATUS, vra | 0x1); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + reg = AC97_PCM_FRONT_DAC_RATE; + else + reg = AC97_PCM_LR_ADC_RATE; + + return ac97_write(codec, reg, runtime->rate); +} + +static int ac97_aux_prepare(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 vra, xsle; + + vra = ac97_read(codec, AC97_EXTENDED_STATUS); + ac97_write(codec, AC97_EXTENDED_STATUS, vra | 0x1); + xsle = ac97_read(codec, AC97_PCI_SID); + ac97_write(codec, AC97_PCI_SID, xsle | 0x8000); + + if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) + return -ENODEV; + + return ac97_write(codec, AC97_PCM_SURR_DAC_RATE, runtime->rate); +} + +#define WM9713_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000) + +#define WM9713_PCM_FORMATS \ + (SNDRV_PCM_FORMAT_S16_LE | SNDRV_PCM_FORMAT_S20_3LE | \ + SNDRV_PCM_FORMAT_S24_LE) + +struct snd_soc_codec_dai wm9713_dai[] = { +{ + .name = "AC97 HiFi", + .type = SND_SOC_DAI_AC97_BUS, + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM9713_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM9713_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = { + .prepare = ac97_hifi_prepare,}, + .dai_ops = { + .set_clkdiv = wm9713_set_dai_clkdiv, + .set_pll = wm9713_set_dai_pll,}, + }, + { + .name = "AC97 Aux", + .playback = { + .stream_name = "Aux Playback", + .channels_min = 1, + .channels_max = 1, + .rates = WM9713_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = { + .prepare = ac97_aux_prepare,}, + .dai_ops = { + .set_clkdiv = wm9713_set_dai_clkdiv, + .set_pll = wm9713_set_dai_pll,}, + }, + { + .name = "WM9713 Voice", + .playback = { + .stream_name = "Voice Playback", + .channels_min = 1, + .channels_max = 1, + .rates = WM9713_RATES, + .formats = WM9713_PCM_FORMATS,}, + .capture = { + .stream_name = "Voice Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM9713_RATES, + .formats = WM9713_PCM_FORMATS,}, + .ops = { + .hw_params = wm9713_pcm_hw_params, + .shutdown = wm9713_voiceshutdown,}, + .dai_ops = { + .set_clkdiv = wm9713_set_dai_clkdiv, + .set_pll = wm9713_set_dai_pll, + .set_fmt = wm9713_set_dai_fmt, + .set_tristate = wm9713_set_dai_tristate, + }, + }, +}; +EXPORT_SYMBOL_GPL(wm9713_dai); + +int wm9713_reset(struct snd_soc_codec *codec, int try_warm) +{ + if (try_warm && soc_ac97_ops.warm_reset) { + soc_ac97_ops.warm_reset(codec->ac97); + if (!(ac97_read(codec, 0) & 0x8000)) + return 1; + } + + soc_ac97_ops.reset(codec->ac97); + if (ac97_read(codec, 0) & 0x8000) + return -EIO; + return 0; +} +EXPORT_SYMBOL_GPL(wm9713_reset); + +static int wm9713_dapm_event(struct snd_soc_codec *codec, int event) +{ + u16 reg; + + switch (event) { + case SNDRV_CTL_POWER_D0: /* full On */ + /* enable thermal shutdown */ + reg = ac97_read(codec, AC97_EXTENDED_MID) & 0x1bff; + ac97_write(codec, AC97_EXTENDED_MID, reg); + break; + case SNDRV_CTL_POWER_D1: /* partial On */ + case SNDRV_CTL_POWER_D2: /* partial On */ + break; + case SNDRV_CTL_POWER_D3hot: /* Off, with power */ + /* enable master bias and vmid */ + reg = ac97_read(codec, AC97_EXTENDED_MID) & 0x3bff; + ac97_write(codec, AC97_EXTENDED_MID, reg); + ac97_write(codec, AC97_POWERDOWN, 0x0000); + break; + case SNDRV_CTL_POWER_D3cold: /* Off, without power */ + /* disable everything including AC link */ + ac97_write(codec, AC97_EXTENDED_MID, 0xffff); + ac97_write(codec, AC97_EXTENDED_MSTATUS, 0xffff); + ac97_write(codec, AC97_POWERDOWN, 0xffff); + break; + } + codec->dapm_state = event; + return 0; +} + +static int wm9713_soc_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + wm9713_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + return 0; +} + +static int wm9713_soc_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + struct wm9713_priv *wm9713 = codec->private_data; + int i, ret; + u16 *cache = codec->reg_cache; + + ret = wm9713_reset(codec, 1); + if (ret < 0) { + printk(KERN_ERR "could not reset AC97 codec\n"); + return ret; + } + + wm9713_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + + /* do we need to re-start the PLL ? */ + if (wm9713->pll_out) + wm9713_set_pll(codec, 0, wm9713->pll_in, wm9713->pll_out); + + /* only synchronise the codec if warm reset failed */ + if (ret == 0) { + for (i = 2; i < ARRAY_SIZE(wm9713_reg) << 1; i += 2) { + if (i == AC97_POWERDOWN || i == AC97_EXTENDED_MID || + i == AC97_EXTENDED_MSTATUS || i > 0x66) + continue; + soc_ac97_ops.write(codec->ac97, i, cache[i>>1]); + } + } + + if (codec->suspend_dapm_state == SNDRV_CTL_POWER_D0) + wm9713_dapm_event(codec, SNDRV_CTL_POWER_D0); + + return ret; +} + +static int wm9713_soc_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0, reg; + + printk(KERN_INFO "WM9713/WM9714 SoC Audio Codec %s\n", WM9713_VERSION); + + socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (socdev->codec == NULL) + return -ENOMEM; + codec = socdev->codec; + mutex_init(&codec->mutex); + + codec->reg_cache = kmemdup(wm9713_reg, sizeof(wm9713_reg), GFP_KERNEL); + if (codec->reg_cache == NULL) { + ret = -ENOMEM; + goto cache_err; + } + codec->reg_cache_size = sizeof(wm9713_reg); + codec->reg_cache_step = 2; + + codec->private_data = kzalloc(sizeof(struct wm9713_priv), GFP_KERNEL); + if (codec->private_data == NULL) { + ret = -ENOMEM; + goto priv_err; + } + + codec->name = "WM9713"; + codec->owner = THIS_MODULE; + codec->dai = wm9713_dai; + codec->num_dai = ARRAY_SIZE(wm9713_dai); + codec->write = ac97_write; + codec->read = ac97_read; + codec->dapm_event = wm9713_dapm_event; + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); + if (ret < 0) + goto codec_err; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) + goto pcm_err; + + /* do a cold reset for the controller and then try + * a warm reset followed by an optional cold reset for codec */ + wm9713_reset(codec, 0); + ret = wm9713_reset(codec, 1); + if (ret < 0) { + printk(KERN_ERR "AC97 link error\n"); + goto reset_err; + } + + wm9713_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + + /* unmute the adc - move to kcontrol */ + reg = ac97_read(codec, AC97_CD) & 0x7fff; + ac97_write(codec, AC97_CD, reg); + + wm9713_add_controls(codec); + wm9713_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) + goto reset_err; + return 0; + +reset_err: + snd_soc_free_pcms(socdev); + +pcm_err: + snd_soc_free_ac97_codec(codec); + +codec_err: + kfree(codec->private_data); + +priv_err: + kfree(codec->reg_cache); + +cache_err: + kfree(socdev->codec); + socdev->codec = NULL; + return ret; +} + +static int wm9713_soc_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec == NULL) + return 0; + + snd_soc_dapm_free(socdev); + snd_soc_free_pcms(socdev); + snd_soc_free_ac97_codec(codec); + kfree(codec->private_data); + kfree(codec->reg_cache); + kfree(codec->dai); + kfree(codec); + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm9713 = { + .probe = wm9713_soc_probe, + .remove = wm9713_soc_remove, + .suspend = wm9713_soc_suspend, + .resume = wm9713_soc_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm9713); + +MODULE_DESCRIPTION("ASoC WM9713/WM9714 driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm9713.h b/sound/soc/codecs/wm9713.h new file mode 100644 index 0000000..d357b6c --- /dev/null +++ b/sound/soc/codecs/wm9713.h @@ -0,0 +1,53 @@ +/* + * wm9713.h -- WM9713 Soc Audio driver + */ + +#ifndef _WM9713_H +#define _WM9713_H + +/* clock inputs */ +#define WM9713_CLKA_PIN 0 +#define WM9713_CLKB_PIN 1 + +/* clock divider ID's */ +#define WM9713_PCMCLK_DIV 0 +#define WM9713_CLKA_MULT 1 +#define WM9713_CLKB_MULT 2 +#define WM9713_HIFI_DIV 3 +#define WM9713_PCMBCLK_DIV 4 +#define WM9713_PCMCLK_PLL_DIV 5 +#define WM9713_HIFI_PLL_DIV 6 + +/* Calculate the appropriate bit mask for the external PCM clock divider */ +#define WM9713_PCMDIV(x) ((x - 1) << 8) + +/* Calculate the appropriate bit mask for the external HiFi clock divider */ +#define WM9713_HIFIDIV(x) ((x - 1) << 12) + +/* MCLK clock mulitipliers */ +#define WM9713_CLKA_X1 (0 << 1) +#define WM9713_CLKA_X2 (1 << 1) +#define WM9713_CLKB_X1 (0 << 2) +#define WM9713_CLKB_X2 (1 << 2) + +/* MCLK clock MUX */ +#define WM9713_CLK_MUX_A (0 << 0) +#define WM9713_CLK_MUX_B (1 << 0) + +/* Voice DAI BCLK divider */ +#define WM9713_PCMBCLK_DIV_1 (0 << 9) +#define WM9713_PCMBCLK_DIV_2 (1 << 9) +#define WM9713_PCMBCLK_DIV_4 (2 << 9) +#define WM9713_PCMBCLK_DIV_8 (3 << 9) +#define WM9713_PCMBCLK_DIV_16 (4 << 9) + +#define WM9713_DAI_AC97_HIFI 0 +#define WM9713_DAI_AC97_AUX 1 +#define WM9713_DAI_PCM_VOICE 2 + +extern struct snd_soc_codec_device soc_codec_dev_wm9713; +extern struct snd_soc_codec_dai wm9713_dai[3]; + +int wm9713_reset(struct snd_soc_codec *codec, int try_warm); + +#endif -- 1.5.4.1

2 1

Re: [alsa-devel] midi problem
by rmgls＠free.fr 14 Feb '08

14 Feb '08

Hi Clemens, Thanks for your reply. you rwote: >> rtc: lost some interrupt at 1024hz >This means that something else prevented the RTC interrupt from being >handled. Are you running some closed-source driver (graphics or WiFi)? No. I confirm: with a generic kernel 2.6.22.3-686 all works fine. since i upgraded to 2.6.24-rc8/2.6.24/2.6.24.1 even with the 2.6.22-3 config with very few changes as you can see later,, something breaks. its a debian testing running on asustek p4p800 smp motherboard with 2 xoen 3ghz. 2g ram and radeon 9800. in case this help, here is the conf file: ============================== # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24.1-custom # Thu Feb 14 20:21:06 2008 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y CONFIG_FAIR_USER_SCHED=y # CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_LSF=y # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_X86_VSMP is not set CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set CONFIG_M686=y # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y CONFIG_X86_PPRO_FENCE=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=m CONFIG_X86_MCE_P4THERMAL=y CONFIG_VM86=y CONFIG_TOSHIBA=m CONFIG_I8K=m # CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=m CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_BOOT_IOREMAP=y # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_HOTPLUG_CPU=y CONFIG_COMPAT_VDSO=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND_SMP_POSSIBLE=y CONFIG_SUSPEND=y CONFIG_HIBERNATION_SMP_POSSIBLE=y # CONFIG_HIBERNATION is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=m CONFIG_ACPI_BAY=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=m CONFIG_ACPI_SBS=m CONFIG_APM=m # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=m # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_POWERNOW_K6=m CONFIG_X86_POWERNOW_K7=m CONFIG_X86_POWERNOW_K7_ACPI=y CONFIG_X86_POWERNOW_K8=m CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_GX_SUSPMOD=m CONFIG_X86_SPEEDSTEP_CENTRINO=m CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y CONFIG_X86_SPEEDSTEP_ICH=m CONFIG_X86_SPEEDSTEP_SMI=m CONFIG_X86_P4_CLOCKMOD=m CONFIG_X86_CPUFREQ_NFORCE2=m CONFIG_X86_LONGRUN=m CONFIG_X86_LONGHAUL=m CONFIG_X86_E_POWERSAVER=m # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y # CONFIG_CPU_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_SCx200=m CONFIG_SCx200HR_TIMER=m CONFIG_K8_NB=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=m CONFIG_I82092=m CONFIG_I82365=m CONFIG_TCIC=m CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=m CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_COMPAQ=m # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set CONFIG_HOTPLUG_PCI_IBM=m CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m CONFIG_HOTPLUG_PCI_CPCI=y CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m CONFIG_HOTPLUG_PCI_SHPC=m # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=m CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m # CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK_ENABLED=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m # CONFIG_NF_CT_PROTO_UDPLITE is not set CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m CONFIG_NF_NAT_AMANDA=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration (EXPERIMENTAL) # CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m # # DECnet: Netfilter Configuration # CONFIG_DECNET_NF_GRABULATOR=m # # Bridge: Netfilter Configuration # CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=m CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=100 # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y CONFIG_TIPC=m CONFIG_TIPC_ADVANCED=y CONFIG_TIPC_ZONES=3 CONFIG_TIPC_CLUSTERS=1 CONFIG_TIPC_NODES=255 CONFIG_TIPC_SLAVE_NODES=0 CONFIG_TIPC_PORTS=8191 CONFIG_TIPC_LOG=0 # CONFIG_TIPC_DEBUG is not set CONFIG_ATM=y CONFIG_ATM_CLIP=y # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set CONFIG_LLC=y CONFIG_LLC2=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_LTPC=m # CONFIG_COPS is not set CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y CONFIG_X25=m CONFIG_LAPB=m CONFIG_ECONET=m CONFIG_ECONET_AUNUDP=y CONFIG_ECONET_NATIVE=y CONFIG_WAN_ROUTER=m CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m # CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m # CONFIG_NET_ACT_NAT is not set CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m # CONFIG_NET_CLS_POLICE is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # # Network testing # CONFIG_NET_PKTGEN=m CONFIG_HAMRADIO=y # # Packet Radio protocols # CONFIG_AX25=m # CONFIG_AX25_DAMA_SLAVE is not set CONFIG_NETROM=m CONFIG_ROSE=m # # AX.25 network device drivers # CONFIG_MKISS=m CONFIG_6PACK=m CONFIG_BPQETHER=m CONFIG_SCC=m # CONFIG_SCC_DELAY is not set # CONFIG_SCC_TRXECHO is not set CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_BAYCOM_EPP=m CONFIG_YAM=m CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m # CONFIG_IRDA_ULTRA is not set # # IrDA options # CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y CONFIG_IRDA_DEBUG=y # # Infrared-port device drivers # # # SIR device drivers # CONFIG_IRTTY_SIR=m # # Dongle support # CONFIG_DONGLE=y CONFIG_ESI_DONGLE=m CONFIG_ACTISYS_DONGLE=m CONFIG_TEKRAM_DONGLE=m CONFIG_TOIM3232_DONGLE=m CONFIG_LITELINK_DONGLE=m CONFIG_MA600_DONGLE=m CONFIG_GIRBIL_DONGLE=m CONFIG_MCP2120_DONGLE=m CONFIG_OLD_BELKIN_DONGLE=m CONFIG_ACT200L_DONGLE=m CONFIG_KINGSUN_DONGLE=m # CONFIG_KSDAZZLE_DONGLE is not set # CONFIG_KS959_DONGLE is not set # # Old SIR device drivers # # # Old Serial dongle support # # # FIR device drivers # CONFIG_USB_IRDA=m CONFIG_SIGMATEL_FIR=m CONFIG_NSC_FIR=m CONFIG_WINBOND_FIR=m CONFIG_TOSHIBA_FIR=m CONFIG_SMC_IRCC_FIR=m CONFIG_ALI_FIR=m CONFIG_VLSI_FIR=m CONFIG_VIA_FIR=m CONFIG_MCS_FIR=m CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIUART_LL is not set CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set CONFIG_RXKAD=m CONFIG_FIB_RULES=y # # Wireless # CONFIG_CFG80211=m CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y CONFIG_MAC80211=m CONFIG_MAC80211_RCSIMPLE=y CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set CONFIG_RFKILL=m CONFIG_RFKILL_INPUT=m CONFIG_RFKILL_LEDS=y # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=m CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK=m CONFIG_MTD_BLOCK_RO=m CONFIG_FTL=m CONFIG_NFTL=m CONFIG_NFTL_RW=y CONFIG_INFTL=m CONFIG_RFD_FTL=m CONFIG_SSFDC=m # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=m CONFIG_MTD_JEDECPROBE=m CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m CONFIG_MTD_CFI_STAA=m CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=m CONFIG_MTD_ROM=m CONFIG_MTD_ABSENT=m # # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=m CONFIG_MTD_PHYSMAP_START=0x8000000 CONFIG_MTD_PHYSMAP_LEN=0x4000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 CONFIG_MTD_PNC2000=m CONFIG_MTD_SC520CDP=m CONFIG_MTD_NETSC520=m CONFIG_MTD_TS5500=m CONFIG_MTD_SBC_GXX=m CONFIG_MTD_SCx200_DOCFLASH=m # CONFIG_MTD_AMD76XROM is not set # CONFIG_MTD_ICHXROM is not set # CONFIG_MTD_ESB2ROM is not set # CONFIG_MTD_CK804XROM is not set # CONFIG_MTD_SCB2_FLASH is not set CONFIG_MTD_NETtel=m CONFIG_MTD_DILNETPC=m CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000 # CONFIG_MTD_L440GX is not set CONFIG_MTD_PCI=m # CONFIG_MTD_INTEL_VR_NOR is not set CONFIG_MTD_PLATRAM=m # # Self-contained MTD device drivers # CONFIG_MTD_PMC551=m # CONFIG_MTD_PMC551_BUGFIX is not set # CONFIG_MTD_PMC551_DEBUG is not set CONFIG_MTD_DATAFLASH=m CONFIG_MTD_M25P80=m CONFIG_MTD_SLRAM=m CONFIG_MTD_PHRAM=m CONFIG_MTD_MTDRAM=m CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTD_BLOCK2MTD=m # # Disk-On-Chip Device Drivers # CONFIG_MTD_DOC2000=m CONFIG_MTD_DOC2001=m CONFIG_MTD_DOC2001PLUS=m CONFIG_MTD_DOCPROBE=m CONFIG_MTD_DOCECC=m # CONFIG_MTD_DOCPROBE_ADVANCED is not set CONFIG_MTD_DOCPROBE_ADDRESS=0 CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_DISKONCHIP=m # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set CONFIG_MTD_NAND_CAFE=m CONFIG_MTD_NAND_CS553X=m # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=m # CONFIG_MTD_ALAUDA is not set CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y # CONFIG_MTD_ONENAND_OTP is not set # CONFIG_MTD_ONENAND_2X_PROGRAM is not set # CONFIG_MTD_ONENAND_SIM is not set # # UBI - Unsorted block images # CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 # CONFIG_MTD_UBI_GLUEBI is not set # # UBI debugging options # # CONFIG_MTD_UBI_DEBUG is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_PC_PCMCIA=m # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_AX88796=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_ISAPNP=y CONFIG_PNPBIOS=y CONFIG_PNPBIOS_PROC_FS=y CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_XD=m CONFIG_PARIDE=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_BPCK6=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m # CONFIG_PARIDE_EPATC8 is not set CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=m CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y CONFIG_IBM_ASM=m CONFIG_PHANTOM=m # CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ASUS_LAPTOP=m # CONFIG_FUJITSU_LAPTOP is not set CONFIG_MSI_LAPTOP=m CONFIG_SONY_LAPTOP=m # CONFIG_SONYPI_COMPAT is not set CONFIG_THINKPAD_ACPI=m # CONFIG_THINKPAD_ACPI_DEBUG is not set CONFIG_THINKPAD_ACPI_BAY=y CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_DELKIN=m CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_BLK_DEV_IDEACPI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=m # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_IDEPNP=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=m CONFIG_BLK_DEV_OPTI621=m CONFIG_BLK_DEV_RZ1000=m CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_AEC62XX=m CONFIG_BLK_DEV_ALI15X3=m # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=m CONFIG_BLK_DEV_ATIIXP=m CONFIG_BLK_DEV_CMD64X=m CONFIG_BLK_DEV_TRIFLEX=m CONFIG_BLK_DEV_CY82C693=m CONFIG_BLK_DEV_CS5520=m CONFIG_BLK_DEV_CS5530=m CONFIG_BLK_DEV_CS5535=m CONFIG_BLK_DEV_HPT34X=m # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=m CONFIG_BLK_DEV_JMICRON=m CONFIG_BLK_DEV_SC1200=m CONFIG_BLK_DEV_PIIX=m CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_IT821X=m CONFIG_BLK_DEV_NS87415=m CONFIG_BLK_DEV_PDC202XX_OLD=m CONFIG_PDC202XX_BURST=y CONFIG_BLK_DEV_PDC202XX_NEW=m CONFIG_BLK_DEV_SVWKS=m CONFIG_BLK_DEV_SIIMAGE=m CONFIG_BLK_DEV_SIS5513=m CONFIG_BLK_DEV_SLC90E66=m CONFIG_BLK_DEV_TRM290=m CONFIG_BLK_DEV_VIA82CXXX=m CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set # # Other IDE chipsets support # # # Note: most of these also require special kernel boot parameters # # CONFIG_BLK_DEV_4DRIVES is not set # CONFIG_BLK_DEV_ALI14XX is not set # CONFIG_BLK_DEV_DTC2278 is not set # CONFIG_BLK_DEV_HT6560B is not set # CONFIG_BLK_DEV_QD65XX is not set # CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m # CONFIG_SCSI_SAS_ATA is not set # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set CONFIG_SCSI_SRP_ATTRS=m # CONFIG_SCSI_SRP_TGT_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_7000FASST=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_IN2000=m CONFIG_SCSI_ARCMSR=m # CONFIG_SCSI_ARCMSR_AER is not set CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m CONFIG_MEGARAID_LEGACY=m CONFIG_MEGARAID_SAS=m CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_DTC3280=m CONFIG_SCSI_EATA=m CONFIG_SCSI_EATA_TAGGED_QUEUE=y CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_GENERIC_NCR5380=m CONFIG_SCSI_GENERIC_NCR5380_MMIO=m CONFIG_SCSI_GENERIC_NCR53C400=y CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_NCR53C406A=m CONFIG_SCSI_STEX=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=m # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set CONFIG_SCSI_PAS16=m CONFIG_SCSI_PSI240I=m CONFIG_SCSI_QLOGIC_FAS=m CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA_FC=m CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_SEAGATE is not set CONFIG_SCSI_SYM53C416=m CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m CONFIG_SCSI_T128=m CONFIG_SCSI_U14_34F=m CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=m CONFIG_SCSI_NSP32=m CONFIG_SCSI_DEBUG=m CONFIG_SCSI_SRP=m # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y CONFIG_SATA_AHCI=m CONFIG_SATA_SVW=m CONFIG_ATA_PIIX=m CONFIG_SATA_MV=m CONFIG_SATA_NV=m CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_PROMISE=m CONFIG_SATA_SX4=m CONFIG_SATA_SIL=m CONFIG_SATA_SIL24=m CONFIG_SATA_SIS=m CONFIG_SATA_ULI=m CONFIG_SATA_VIA=m CONFIG_SATA_VITESSE=m CONFIG_SATA_INIC162X=m # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set CONFIG_PATA_EFAR=m CONFIG_ATA_GENERIC=m # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set CONFIG_PATA_ISAPNP=m # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set CONFIG_PATA_LEGACY=m # CONFIG_PATA_TRIFLEX is not set CONFIG_PATA_MARVELL=m # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set CONFIG_PATA_PCMCIA=m CONFIG_PATA_PDC_OLD=m CONFIG_PATA_QDI=m CONFIG_PATA_RADISYS=m # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set CONFIG_PATA_SIS=m # CONFIG_PATA_VIA is not set CONFIG_PATA_WINBOND=m CONFIG_PATA_WINBOND_VLB=m CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m # CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_MULTIPATH_HP is not set CONFIG_DM_DELAY=m # CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=40 CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m # CONFIG_IEEE1394 is not set CONFIG_I2O=m CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=m CONFIG_I2O_CONFIG_OLD_IOCTL=y CONFIG_I2O_BUS=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_IFB=m CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set CONFIG_EQUALIZER=m CONFIG_TUN=m # CONFIG_VETH is not set CONFIG_NET_SB1000=m CONFIG_ARCNET=m CONFIG_ARCNET_1201=m CONFIG_ARCNET_1051=m CONFIG_ARCNET_RAW=m CONFIG_ARCNET_CAP=m CONFIG_ARCNET_COM90xx=m CONFIG_ARCNET_COM90xxIO=m CONFIG_ARCNET_RIM_I=m CONFIG_ARCNET_COM20020=m CONFIG_ARCNET_COM20020_ISA=m CONFIG_ARCNET_COM20020_PCI=m CONFIG_PHYLIB=m # # MII PHY device drivers # CONFIG_MARVELL_PHY=m CONFIG_DAVICOM_PHY=m CONFIG_QSEMI_PHY=m CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m # CONFIG_ICPLUS_PHY is not set CONFIG_FIXED_PHY=m # CONFIG_FIXED_MII_10_FDX is not set # CONFIG_FIXED_MII_100_FDX is not set # CONFIG_FIXED_MII_1000_FDX is not set CONFIG_FIXED_MII_AMNT=1 # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_CASSINI=m CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=m CONFIG_EL2=m CONFIG_ELPLUS=m CONFIG_EL16=m CONFIG_EL3=m CONFIG_3C515=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_LANCE=m CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=m CONFIG_ULTRA=m CONFIG_SMC9194=m CONFIG_NET_VENDOR_RACAL=y CONFIG_NI52=m CONFIG_NI65=m CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_ULI526X=m CONFIG_PCMCIA_XIRCOM=m CONFIG_AT1700=m CONFIG_DEPCA=m CONFIG_HP100=m CONFIG_NET_ISA=y CONFIG_E2100=m CONFIG_EWRK3=m CONFIG_EEXPRESS=m CONFIG_EEXPRESS_PRO=m CONFIG_HPLAN_PLUS=m CONFIG_HPLAN=m CONFIG_LP486E=m CONFIG_ETH16I=m CONFIG_NE2000=m CONFIG_ZNET=m CONFIG_SEEQ8005=m # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_PCNET32_NAPI=y CONFIG_AMD8111_ETH=m CONFIG_AMD8111E_NAPI=y CONFIG_ADAPTEC_STARFIRE=m CONFIG_ADAPTEC_STARFIRE_NAPI=y CONFIG_AC3200=m CONFIG_APRICOT=m CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y CONFIG_FORCEDETH=m # CONFIG_FORCEDETH_NAPI is not set CONFIG_CS89x0=m CONFIG_EEPRO100=m CONFIG_E100=m CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set CONFIG_VIA_RHINE_NAPI=y CONFIG_SC92031=m # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m CONFIG_R8169_NAPI=y CONFIG_R8169_VLAN=y CONFIG_SIS190=m CONFIG_SKGE=m # CONFIG_SKGE_DEBUG is not set CONFIG_SKY2=m # CONFIG_SKY2_DEBUG is not set # CONFIG_SK98LIN is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m CONFIG_QLA3XXX=m CONFIG_ATL1=m CONFIG_NETDEV_10000=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T1_NAPI=y CONFIG_CHELSIO_T3=m # CONFIG_IXGBE is not set CONFIG_IXGB=m CONFIG_IXGB_NAPI=y CONFIG_S2IO=m CONFIG_S2IO_NAPI=y CONFIG_MYRI10GE=m CONFIG_NETXEN_NIC=m # CONFIG_NIU is not set CONFIG_MLX4_CORE=m CONFIG_MLX4_DEBUG=y # CONFIG_TEHUTI is not set CONFIG_TR=y CONFIG_IBMTR=m CONFIG_IBMOL=m CONFIG_IBMLS=m # CONFIG_3C359 is not set CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_SKISA=m CONFIG_PROTEON=m CONFIG_ABYSS=m CONFIG_SMCTR=m # # Wireless LAN # CONFIG_WLAN_PRE80211=y CONFIG_STRIP=m CONFIG_ARLAN=m CONFIG_WAVELAN=m CONFIG_PCMCIA_WAVELAN=m CONFIG_PCMCIA_NETWAVE=m CONFIG_WLAN_80211=y CONFIG_PCMCIA_RAYCS=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y # CONFIG_IPW2100_DEBUG is not set CONFIG_IPW2200=m CONFIG_IPW2200_MONITOR=y # CONFIG_IPW2200_RADIOTAP is not set # CONFIG_IPW2200_PROMISCUOUS is not set CONFIG_IPW2200_QOS=y # CONFIG_IPW2200_DEBUG is not set CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m # CONFIG_LIBERTAS_CS is not set # CONFIG_LIBERTAS_SDIO is not set # CONFIG_LIBERTAS_DEBUG is not set CONFIG_AIRO=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m CONFIG_PCI_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m CONFIG_PCMCIA_ATMEL=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m CONFIG_PRISM54=m CONFIG_USB_ZD1201=m # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_P54_COMMON is not set # CONFIG_IWLWIFI is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_HOSTAP_CS=m CONFIG_BCM43XX=m CONFIG_BCM43XX_DEBUG=y CONFIG_BCM43XX_DMA=y CONFIG_BCM43XX_PIO=y CONFIG_BCM43XX_DMA_AND_PIO_MODE=y # CONFIG_BCM43XX_DMA_MODE is not set # CONFIG_BCM43XX_PIO_MODE is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set # CONFIG_RT2X00 is not set # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=m CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m CONFIG_ARCNET_COM20020_CS=m CONFIG_PCMCIA_IBMTR=m CONFIG_WAN=y CONFIG_HOSTESS_SV11=m CONFIG_COSA=m CONFIG_LANMEDIA=m CONFIG_SEALEVEL_4021=m CONFIG_HDLC=m CONFIG_HDLC_RAW=m CONFIG_HDLC_RAW_ETH=m CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m CONFIG_HDLC_X25=m CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_PC300=m CONFIG_PC300_MLPPP=y # # Cyclades-PC300 MLPPP support is disabled. # # # Refer to the file README.mlppp, provided by PC300 package. # # CONFIG_PC300TOO is not set CONFIG_N2=m CONFIG_C101=m CONFIG_FARSYNC=m CONFIG_DSCC4=m CONFIG_DSCC4_PCISYNC=y CONFIG_DSCC4_PCI_RST=y CONFIG_DLCI=m CONFIG_DLCI_MAX=8 CONFIG_SDLA=m CONFIG_WAN_ROUTER_DRIVERS=m CONFIG_CYCLADES_SYNC=m CONFIG_CYCLOMX_X25=y CONFIG_LAPBETHER=m CONFIG_X25_ASY=m CONFIG_SBNI=m # CONFIG_SBNI_MULTILINE is not set CONFIG_ATM_DRIVERS=y CONFIG_ATM_DUMMY=m CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m # CONFIG_ATM_ENI_DEBUG is not set # CONFIG_ATM_ENI_TUNE_BURST is not set CONFIG_ATM_FIRESTREAM=m CONFIG_ATM_ZATM=m # CONFIG_ATM_ZATM_DEBUG is not set CONFIG_ATM_NICSTAR=m # CONFIG_ATM_NICSTAR_USE_SUNI is not set # CONFIG_ATM_NICSTAR_USE_IDT77105 is not set CONFIG_ATM_IDT77252=m # CONFIG_ATM_IDT77252_DEBUG is not set # CONFIG_ATM_IDT77252_RCV_ALL is not set CONFIG_ATM_IDT77252_USE_SUNI=y CONFIG_ATM_AMBASSADOR=m # CONFIG_ATM_AMBASSADOR_DEBUG is not set CONFIG_ATM_HORIZON=m # CONFIG_ATM_HORIZON_DEBUG is not set CONFIG_ATM_IA=m # CONFIG_ATM_IA_DEBUG is not set CONFIG_ATM_FORE200E_MAYBE=m CONFIG_ATM_FORE200E_PCA=y CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y # CONFIG_ATM_FORE200E_USE_TASKLET is not set CONFIG_ATM_FORE200E_TX_RETRY=16 CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_FORE200E=m CONFIG_ATM_HE=m CONFIG_ATM_HE_USE_SUNI=y CONFIG_FDDI=y CONFIG_DEFXX=m # CONFIG_DEFXX_MMIO is not set CONFIG_SKFP=m CONFIG_HIPPI=y CONFIG_ROADRUNNER=m # CONFIG_ROADRUNNER_LARGE_RINGS is not set CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m CONFIG_PPPOATM=m # CONFIG_PPPOL2TP is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y CONFIG_NET_FC=y CONFIG_SHAPER=m CONFIG_NETCONSOLE=m # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y CONFIG_ISDN=m CONFIG_ISDN_I4L=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y CONFIG_IPPP_FILTER=y CONFIG_ISDN_PPP_BSDCOMP=m CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y CONFIG_ISDN_X25=y # # ISDN feature submodules # # CONFIG_ISDN_DIVERSION is not set # # ISDN4Linux hardware drivers # # # Passive cards # CONFIG_ISDN_DRV_HISAX=m # # D-channel protocol features # CONFIG_HISAX_EURO=y CONFIG_DE_AOC=y # CONFIG_HISAX_NO_SENDCOMPLETE is not set # CONFIG_HISAX_NO_LLC is not set # CONFIG_HISAX_NO_KEYPAD is not set CONFIG_HISAX_1TR6=y CONFIG_HISAX_NI1=y CONFIG_HISAX_MAX_CARDS=8 # # HiSax supported cards # CONFIG_HISAX_16_0=y CONFIG_HISAX_16_3=y CONFIG_HISAX_TELESPCI=y CONFIG_HISAX_S0BOX=y CONFIG_HISAX_AVM_A1=y CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_IX1MICROR2=y CONFIG_HISAX_DIEHLDIVA=y CONFIG_HISAX_ASUSCOM=y CONFIG_HISAX_TELEINT=y CONFIG_HISAX_HFCS=y CONFIG_HISAX_SEDLBAUER=y CONFIG_HISAX_SPORTSTER=y CONFIG_HISAX_MIC=y CONFIG_HISAX_NETJET=y CONFIG_HISAX_NETJET_U=y CONFIG_HISAX_NICCY=y CONFIG_HISAX_ISURF=y CONFIG_HISAX_HSTSAPHIR=y CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_SCT_QUADRO=y CONFIG_HISAX_GAZEL=y CONFIG_HISAX_HFC_PCI=y CONFIG_HISAX_W6692=y CONFIG_HISAX_HFC_SX=y CONFIG_HISAX_ENTERNOW_PCI=y # CONFIG_HISAX_DEBUG is not set # # HiSax PCMCIA card service modules # CONFIG_HISAX_SEDLBAUER_CS=m CONFIG_HISAX_ELSA_CS=m CONFIG_HISAX_AVM_A1_CS=m CONFIG_HISAX_TELES_CS=m # # HiSax sub driver modules # CONFIG_HISAX_ST5481=m CONFIG_HISAX_HFCUSB=m CONFIG_HISAX_HFC4S8S=m CONFIG_HISAX_FRITZ_PCIPNP=m CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_ISDN_DRV_ICN=m CONFIG_ISDN_DRV_PCBIT=m CONFIG_ISDN_DRV_SC=m CONFIG_ISDN_DRV_ACT2000=m CONFIG_ISDN_DRV_GIGASET=m CONFIG_GIGASET_BASE=m CONFIG_GIGASET_M105=m CONFIG_GIGASET_M101=m # CONFIG_GIGASET_DEBUG is not set # CONFIG_GIGASET_UNDOCREQ is not set CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_CAPI_TRACE=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=m CONFIG_ISDN_CAPI_CAPIDRV=m # # CAPI hardware drivers # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1ISA=m CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_T1ISA=m CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m CONFIG_ISDN_DRV_AVMB1_AVM_CS=m CONFIG_ISDN_DRV_AVMB1_T1PCI=m CONFIG_ISDN_DRV_AVMB1_C4=m CONFIG_CAPI_EICON=y CONFIG_ISDN_DIVAS=m CONFIG_ISDN_DIVAS_BRIPCI=y CONFIG_ISDN_DIVAS_PRIPCI=y CONFIG_ISDN_DIVAS_DIVACAPI=m CONFIG_ISDN_DIVAS_USERIDI=m CONFIG_ISDN_DIVAS_MAINT=m CONFIG_PHONE=m CONFIG_PHONE_IXJ=m CONFIG_PHONE_IXJ_PCMCIA=m # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_LKKBD=m CONFIG_KEYBOARD_XTKBD=m CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_STOWAWAY=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_INPORT=m # CONFIG_MOUSE_ATIXL is not set CONFIG_MOUSE_LOGIBM=m CONFIG_MOUSE_PC110PAD=m CONFIG_MOUSE_VSXXXAA=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y CONFIG_JOYSTICK_IFORCE_232=y CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m # CONFIG_JOYSTICK_XPAD_FF is not set # CONFIG_JOYSTICK_XPAD_LEDS is not set CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_KBTAB=m CONFIG_TABLET_USB_WACOM=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m # CONFIG_TOUCHSCREEN_FUJITSU is not set CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_MK712=m CONFIG_TOUCHSCREEN_PENMOUNT=m CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m CONFIG_TOUCHSCREEN_UCB1400=m CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_WISTRON_BTNS=m CONFIG_INPUT_ATLAS_BTNS=m CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_UINPUT=m # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_FM801=m # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set CONFIG_ROCKETPORT=m CONFIG_CYCLADES=m # CONFIG_CYZ_INTR is not set # CONFIG_DIGIEPCA is not set # CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set CONFIG_MOXA_SMARTIO=m CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_ISI is not set CONFIG_SYNCLINK=m CONFIG_SYNCLINKMP=m CONFIG_SYNCLINK_GT=m CONFIG_N_HDLC=m # CONFIG_SPECIALIX is not set CONFIG_SX=m # CONFIG_RIO is not set CONFIG_STALDRV=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_FOURPORT=m CONFIG_SERIAL_8250_ACCENT=m CONFIG_SERIAL_8250_BOCA=m CONFIG_SERIAL_8250_EXAR_ST16C554=m CONFIG_SERIAL_8250_HUB6=m CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_GEODE=m CONFIG_HW_RANDOM_VIA=m CONFIG_NVRAM=m CONFIG_RTC=m CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y CONFIG_DTLK=m CONFIG_R3964=m CONFIG_APPLICOM=m CONFIG_SONYPI=m # # PCMCIA character devices # CONFIG_SYNCLINK_CS=m CONFIG_CARDMAN_4000=m CONFIG_CARDMAN_4040=m CONFIG_MWAVE=m CONFIG_SCx200_GPIO=m CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m CONFIG_CS5535_GPIO=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m # CONFIG_TCG_TPM is not set CONFIG_TELCLOCK=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_OCORES=m CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_PROSAVAGE=m CONFIG_I2C_SAVAGE4=m CONFIG_I2C_SIMTEC=m CONFIG_SCx200_I2C=m CONFIG_SCx200_I2C_SCL=12 CONFIG_SCx200_I2C_SDA=13 CONFIG_SCx200_ACB=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m # CONFIG_I2C_TAOS_EVM is not set CONFIG_I2C_STUB=m CONFIG_I2C_TINY_USB=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m CONFIG_I2C_PCA_ISA=m # # Miscellaneous I2C Chip support # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m # CONFIG_DS1682 is not set CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_MAX6875=m # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=m CONFIG_SPI_BUTTERFLY=m # CONFIG_SPI_LM70_LLP is not set # # SPI Protocol Masters # CONFIG_SPI_AT25=m # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_W1=m CONFIG_W1_CON=y # # 1-wire Bus Masters # CONFIG_W1_MASTER_MATROX=m CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set # CONFIG_W1_SLAVE_DS2760 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m CONFIG_SENSORS_ABITUGURU=m # CONFIG_SENSORS_ABITUGURU3 is not set CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7470 is not set CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_I5K_AMB is not set CONFIG_SENSORS_F71805F=m # CONFIG_SENSORS_F71882FG is not set CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_FSCHER=m CONFIG_SENSORS_FSCPOS=m # CONFIG_SENSORS_FSCHMD is not set CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_CORETEMP=m # CONFIG_SENSORS_IBMPEX is not set CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m # CONFIG_SENSORS_LM93 is not set CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_SIS5595=m # CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_THMC50 is not set CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_HDAPS=m CONFIG_SENSORS_APPLESMC=m # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m CONFIG_SC520_WDT=m CONFIG_EUROTECH_WDT=m CONFIG_IB700_WDT=m CONFIG_IBMASR=m CONFIG_WAFER_WDT=m CONFIG_I6300ESB_WDT=m CONFIG_ITCO_WDT=m # CONFIG_ITCO_VENDOR_SUPPORT is not set # CONFIG_IT8712F_WDT is not set CONFIG_SC1200_WDT=m CONFIG_SCx200_WDT=m CONFIG_PC87413_WDT=m CONFIG_60XX_WDT=m CONFIG_SBC8360_WDT=m # CONFIG_SBC7240_WDT is not set CONFIG_CPU5_WDT=m CONFIG_SMSC37B787_WDT=m CONFIG_W83627HF_WDT=m CONFIG_W83697HF_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m CONFIG_SBC_EPX_C3_WATCHDOG=m # # ISA-based Watchdog Cards # CONFIG_PCWATCHDOG=m CONFIG_MIXCOMWD=m CONFIG_WDT=m CONFIG_WDT_501=y # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m CONFIG_WDT_501_PCI=y # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # CONFIG_MFD_SM501=m # # Multimedia devices # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_TVAUDIO=m CONFIG_VIDEO_TDA7432=m CONFIG_VIDEO_TDA9840=m CONFIG_VIDEO_TDA9875=m CONFIG_VIDEO_TEA6415C=m CONFIG_VIDEO_TEA6420=m CONFIG_VIDEO_MSP3400=m CONFIG_VIDEO_CS53L32A=m CONFIG_VIDEO_WM8775=m CONFIG_VIDEO_WM8739=m CONFIG_VIDEO_VP27SMPX=m CONFIG_VIDEO_BT819=m CONFIG_VIDEO_BT856=m CONFIG_VIDEO_KS0127=m CONFIG_VIDEO_OV7670=m CONFIG_VIDEO_SAA7110=m CONFIG_VIDEO_SAA7111=m CONFIG_VIDEO_SAA7114=m CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_TVP5150=m CONFIG_VIDEO_VPX3220=m CONFIG_VIDEO_CX25840=m CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_SAA7127=m CONFIG_VIDEO_SAA7185=m CONFIG_VIDEO_ADV7170=m CONFIG_VIDEO_ADV7175=m CONFIG_VIDEO_UPD64031A=m CONFIG_VIDEO_UPD64083=m CONFIG_VIDEO_VIVI=m CONFIG_VIDEO_BT848=m CONFIG_VIDEO_BT848_DVB=y CONFIG_VIDEO_SAA6588=m CONFIG_VIDEO_PMS=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_PP=m CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_CPIA2=m CONFIG_VIDEO_SAA5246A=m CONFIG_VIDEO_SAA5249=m CONFIG_TUNER_3036=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN_ZR36060=m CONFIG_VIDEO_ZORAN=m CONFIG_VIDEO_ZORAN_BUZ=m CONFIG_VIDEO_ZORAN_DC10=m CONFIG_VIDEO_ZORAN_DC30=m CONFIG_VIDEO_ZORAN_LML33=m CONFIG_VIDEO_ZORAN_LML33R10=m CONFIG_VIDEO_ZORAN_AVS6EYES=m CONFIG_VIDEO_MEYE=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_OSS=m CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_MXB=m CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_CX88=m CONFIG_VIDEO_CX88_ALSA=m CONFIG_VIDEO_CX88_BLACKBIRD=m CONFIG_VIDEO_CX88_DVB=m CONFIG_VIDEO_CX88_VP3054=m # CONFIG_VIDEO_CX23885 is not set CONFIG_VIDEO_IVTV=m # CONFIG_VIDEO_FB_IVTV is not set CONFIG_VIDEO_CAFE_CCIC=m CONFIG_V4L_USB_DRIVERS=y CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_29XXX=y CONFIG_VIDEO_PVRUSB2_24XXX=y CONFIG_VIDEO_PVRUSB2_SYSFS=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_USBVISION=m CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m CONFIG_USB_IBMCAM=m CONFIG_USB_KONICAWC=m CONFIG_USB_QUICKCAM_MESSENGER=m CONFIG_USB_ET61X251=m CONFIG_VIDEO_OVCAMCHIP=m # CONFIG_USB_W9968CF is not set CONFIG_USB_OV511=m CONFIG_USB_SE401=m CONFIG_USB_SN9C102=m CONFIG_USB_STV680=m CONFIG_USB_ZC0301=m CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_ZR364XX=m CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_CADET=m CONFIG_RADIO_RTRACK=m CONFIG_RADIO_RTRACK2=m CONFIG_RADIO_AZTECH=m CONFIG_RADIO_GEMTEK=m CONFIG_RADIO_GEMTEK_PCI=m CONFIG_RADIO_MAXIRADIO=m CONFIG_RADIO_MAESTRO=m CONFIG_RADIO_SF16FMI=m CONFIG_RADIO_SF16FMR2=m CONFIG_RADIO_TERRATEC=m CONFIG_RADIO_TRUST=m CONFIG_RADIO_TYPHOON=m CONFIG_RADIO_TYPHOON_PROC_FS=y CONFIG_RADIO_ZOLTRIX=m CONFIG_USB_DSBR=m CONFIG_DVB_CORE=m CONFIG_DVB_CORE_ATTACH=y CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # CONFIG_DVB_AV7110=m CONFIG_DVB_AV7110_OSD=y CONFIG_DVB_BUDGET=m CONFIG_DVB_BUDGET_CI=m CONFIG_DVB_BUDGET_AV=m CONFIG_DVB_BUDGET_PATCH=m # # Supported USB Adapters # CONFIG_DVB_USB=m # CONFIG_DVB_USB_DEBUG is not set CONFIG_DVB_USB_A800=m CONFIG_DVB_USB_DIBUSB_MB=m CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y CONFIG_DVB_USB_DIBUSB_MC=m CONFIG_DVB_USB_DIB0700=m CONFIG_DVB_USB_UMT_010=m CONFIG_DVB_USB_CXUSB=m CONFIG_DVB_USB_M920X=m CONFIG_DVB_USB_GL861=m CONFIG_DVB_USB_AU6610=m CONFIG_DVB_USB_DIGITV=m CONFIG_DVB_USB_VP7045=m CONFIG_DVB_USB_VP702X=m CONFIG_DVB_USB_GP8PSK=m CONFIG_DVB_USB_NOVA_T_USB2=m CONFIG_DVB_USB_TTUSB2=m CONFIG_DVB_USB_DTT200U=m CONFIG_DVB_USB_OPERA1=m # CONFIG_DVB_USB_AF9005 is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m CONFIG_DVB_CINERGYT2=m # CONFIG_DVB_CINERGYT2_TUNING is not set # # Supported FlexCopII (B2C2) Adapters # CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_DVB_B2C2_FLEXCOP_PCI=m CONFIG_DVB_B2C2_FLEXCOP_USB=m # CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set # # Supported BT878 Adapters # CONFIG_DVB_BT8XX=m # # Supported Pluto2 Adapters # CONFIG_DVB_PLUTO2=m # # Supported DVB Frontends # # # Customise DVB Frontends # # CONFIG_DVB_FE_CUSTOMISE is not set # # DVB-S (satellite) frontends # CONFIG_DVB_STV0299=m CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_TDA8083=m CONFIG_DVB_MT312=m CONFIG_DVB_VES1X93=m CONFIG_DVB_S5H1420=m CONFIG_DVB_TDA10086=m # # DVB-T (terrestrial) frontends # CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m CONFIG_DVB_L64781=m CONFIG_DVB_TDA1004X=m CONFIG_DVB_NXT6000=m CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m CONFIG_DVB_DIB3000MB=m CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m # # DVB-C (cable) frontends # CONFIG_DVB_VES1820=m CONFIG_DVB_TDA10021=m CONFIG_DVB_TDA10023=m CONFIG_DVB_STV0297=m # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_NXT200X=m CONFIG_DVB_OR51211=m CONFIG_DVB_OR51132=m CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m # CONFIG_DVB_S5H1409 is not set # # Tuners/PLL support # CONFIG_DVB_PLL=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TDA827X=m CONFIG_DVB_TUNER_QT1010=m CONFIG_DVB_TUNER_MT2060=m CONFIG_DVB_TUNER_MT2266=m # CONFIG_DVB_TUNER_MT2131 is not set CONFIG_DVB_TUNER_DIB0070=m # # Miscellaneous devices # CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6421=m CONFIG_DVB_TUA6100=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_VIDEO_TUNER=m # CONFIG_VIDEO_TUNER_CUSTOMIZE is not set CONFIG_TUNER_MT20XX=m CONFIG_TUNER_TDA8290=m CONFIG_TUNER_TEA5761=m CONFIG_TUNER_TEA5767=m CONFIG_TUNER_SIMPLE=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_AGP=m CONFIG_AGP_ALI=m CONFIG_AGP_ATI=m CONFIG_AGP_AMD=m CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m CONFIG_AGP_NVIDIA=m CONFIG_AGP_SIS=m CONFIG_AGP_SWORKS=m CONFIG_AGP_VIA=m CONFIG_AGP_EFFICEON=m CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m CONFIG_DRM_SAVAGE=m CONFIG_VGASTATE=m # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=m CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y CONFIG_FB_SVGALIB=m # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # CONFIG_FB_CIRRUS=m CONFIG_FB_PM2=m CONFIG_FB_PM2_FIFO_DISCONNECT=y CONFIG_FB_CYBER2000=m CONFIG_FB_ARC=m # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y # CONFIG_FB_EFI is not set # CONFIG_FB_IMAC is not set CONFIG_FB_HECUBA=m CONFIG_FB_HGA=m # CONFIG_FB_HGA_ACCEL is not set CONFIG_FB_S1D13XXX=m CONFIG_FB_NVIDIA=m CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set CONFIG_FB_I810=m # CONFIG_FB_I810_GTF is not set CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m CONFIG_FB_MATROX_MULTIHEAD=y CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=m CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=m CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=m CONFIG_FB_SAVAGE=m CONFIG_FB_SAVAGE_I2C=y # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=m CONFIG_FB_SIS_300=y CONFIG_FB_SIS_315=y CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m # CONFIG_FB_3DFX_ACCEL is not set CONFIG_FB_VOODOO1=m CONFIG_FB_VT8623=m CONFIG_FB_CYBLA=m CONFIG_FB_TRIDENT=m # CONFIG_FB_TRIDENT_ACCEL is not set CONFIG_FB_ARK=m CONFIG_FB_PM3=m CONFIG_FB_GEODE=y # CONFIG_FB_GEODE_LX is not set CONFIG_FB_GEODE_GX=m # CONFIG_FB_GEODE_GX_SET_FBSIZE is not set CONFIG_FB_GEODE_GX1=m CONFIG_FB_SM501=m CONFIG_FB_VIRTUAL=m CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set CONFIG_BACKLIGHT_PROGEAR=m # # Display device support # CONFIG_DISPLAY_SUPPORT=m # # Display hardware drivers # # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y CONFIG_MDA_CONSOLE=m CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_OPL4_LIB=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_MTS64=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m CONFIG_SND_PORTMAN2X4=m CONFIG_SND_AD1848_LIB=m CONFIG_SND_CS4231_LIB=m CONFIG_SND_SB_COMMON=m CONFIG_SND_SB8_DSP=m CONFIG_SND_SB16_DSP=m # # ISA devices # CONFIG_SND_ADLIB=m CONFIG_SND_AD1816A=m CONFIG_SND_AD1848=m CONFIG_SND_ALS100=m CONFIG_SND_AZT2320=m CONFIG_SND_CMI8330=m CONFIG_SND_CS4231=m CONFIG_SND_CS4232=m CONFIG_SND_CS4236=m CONFIG_SND_DT019X=m CONFIG_SND_ES968=m CONFIG_SND_ES1688=m CONFIG_SND_ES18XX=m # CONFIG_SND_SC6000 is not set CONFIG_SND_GUS_SYNTH=m CONFIG_SND_GUSCLASSIC=m CONFIG_SND_GUSEXTREME=m CONFIG_SND_GUSMAX=m CONFIG_SND_INTERWAVE=m CONFIG_SND_INTERWAVE_STB=m CONFIG_SND_OPL3SA2=m CONFIG_SND_OPTI92X_AD1848=m CONFIG_SND_OPTI92X_CS4231=m CONFIG_SND_OPTI93X=m CONFIG_SND_MIRO=m CONFIG_SND_SB8=m CONFIG_SND_SB16=m CONFIG_SND_SBAWE=m CONFIG_SND_SB16_CSP=y CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL=y CONFIG_SND_SGALAXY=m CONFIG_SND_SSCAPE=m CONFIG_SND_WAVEFRONT=m CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL=y # # PCI devices # CONFIG_SND_AD1889=m CONFIG_SND_ALS300=m CONFIG_SND_ALS4000=m CONFIG_SND_ALI5451=m CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m CONFIG_SND_AZT3328=m CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=m CONFIG_SND_CMIPCI=m CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y # CONFIG_SND_CS5530 is not set CONFIG_SND_CS5535AUDIO=m CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m CONFIG_SND_DARLA24=m CONFIG_SND_GINA24=m CONFIG_SND_LAYLA24=m CONFIG_SND_MONA=m CONFIG_SND_MIA=m CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_FM801=m CONFIG_SND_FM801_TEA575X_BOOL=y CONFIG_SND_FM801_TEA575X=m CONFIG_SND_HDA_INTEL=m # CONFIG_SND_HDA_HWDEP is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_HDA_POWER_SAVE is not set CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y CONFIG_SND_MAESTRO3=m CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y CONFIG_SND_MIXART=m CONFIG_SND_NM256=m CONFIG_SND_PCXHR=m CONFIG_SND_RIPTIDE=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_SONICVIBES=m CONFIG_SND_TRIDENT=m CONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VX222=m CONFIG_SND_YMFPCI=m CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 # # SPI devices # # # USB devices # CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_USX2Y=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y # # PCMCIA devices # CONFIG_SND_VXPOCKET=m CONFIG_SND_PDAUDIOCF=m # # System on Chip audio support # # CONFIG_SND_SOC is not set # # SoC Audio support for SuperH # # # Open Sound System # CONFIG_SOUND_PRIME=m CONFIG_SOUND_TRIDENT=m # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_TRACEINIT is not set # CONFIG_SOUND_DMAP is not set CONFIG_SOUND_SSCAPE=m CONFIG_SOUND_VMIDI=m CONFIG_SOUND_TRIX=m CONFIG_SOUND_MSS=m CONFIG_SOUND_MPU401=m CONFIG_SOUND_PAS=m CONFIG_SOUND_PSS=m CONFIG_PSS_MIXER=y CONFIG_SOUND_SB=m CONFIG_SOUND_YM3812=m CONFIG_SOUND_UART6850=m CONFIG_SOUND_AEDSP16=m CONFIG_SC6600=y CONFIG_SC6600_JOY=y CONFIG_SC6600_CDROM=4 CONFIG_SC6600_CDROMBASE=0x0 # CONFIG_AEDSP16_MSS is not set # CONFIG_AEDSP16_SBPRO is not set CONFIG_SOUND_KAHLUA=m CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT_POWERBOOK=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_ISP116X_HCD=m CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m CONFIG_USB_MON=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_AIRCABLE=m CONFIG_USB_SERIAL_AIRPRIME=m CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CP2101=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_FUNSOFT=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m CONFIG_USB_SERIAL_KEYSPAN_PDA=m # CONFIG_USB_SERIAL_KEYSPAN is not set CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_MOS7720=m CONFIG_USB_SERIAL_MOS7840=m CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m # CONFIG_USB_SERIAL_SAFE_PADDED is not set CONFIG_USB_SERIAL_SIERRAWIRELESS=m # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_SERIAL_DEBUG=m CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set CONFIG_USB_ADUTUX=m CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_BERRY_CHARGE=m CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m CONFIG_USB_PHIDGET=m CONFIG_USB_PHIDGETKIT=m CONFIG_USB_PHIDGETMOTORCONTROL=m CONFIG_USB_PHIDGETSERVO=m CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_LD=m CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=m CONFIG_USB_TEST=m # # USB DSL modem support # CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # # USB Gadget Support # CONFIG_USB_GADGET=m # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=m # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m CONFIG_USB_MIDI_GADGET=m CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # # MMC/SD Host Controller Drivers # CONFIG_MMC_SDHCI=m # CONFIG_MMC_RICOH_MMC is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m # # LED drivers # CONFIG_LEDS_NET48XX=m CONFIG_LEDS_WRAP=m # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_AMSO1100=m # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set CONFIG_INFINIBAND_CXGB3=m # CONFIG_INFINIBAND_CXGB3_DEBUG is not set CONFIG_MLX4_INFINIBAND=m CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m # CONFIG_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=m # CONFIG_RTC_DRV_DS1374 is not set CONFIG_RTC_DRV_DS1672=m CONFIG_RTC_DRV_MAX6900=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m # CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers # CONFIG_RTC_DRV_RS5C348=m CONFIG_RTC_DRV_MAX6902=m # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=m CONFIG_RTC_DRV_DS1553=m # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_M48T86=m # CONFIG_RTC_DRV_M48T59 is not set CONFIG_RTC_DRV_V3020=m # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_VIRTUALIZATION is not set # # Userspace I/O # # CONFIG_UIO is not set # # Firmware Drivers # CONFIG_EDD=m CONFIG_EFI_VARS=m CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4DEV_FS=m CONFIG_EXT4DEV_FS_XATTR=y CONFIG_EXT4DEV_FS_POSIX_ACL=y CONFIG_EXT4DEV_FS_SECURITY=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_GFS2_FS=m CONFIG_GFS2_FS_LOCKING_NOLOCK=m CONFIG_GFS2_FS_LOCKING_DLM=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m CONFIG_ECRYPT_FS=m CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set CONFIG_JFFS2_FS_XATTR=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFFS2_FS_SECURITY=y # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y CONFIG_VXFS_FS=m CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_UFS_FS_WRITE=y # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_XPRT_RDMA=m CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y # CONFIG_NCPFS_SMALLDOS is not set CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y # CONFIG_ACORN_PARTITION_CUMANA is not set # CONFIG_ACORN_PARTITION_EESOX is not set CONFIG_ACORN_PARTITION_ICS=y # CONFIG_ACORN_PARTITION_ADFS is not set # CONFIG_ACORN_PARTITION_POWERTEC is not set CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=m # CONFIG_KPROBES is not set # CONFIG_MARKERS is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set # CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_586=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m # CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_GEODE=m # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_DEC16=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y ================================== unfortunately, lspci -v shows nothing. Thanks. rmgls(a)free.fr

1 0

Re: [alsa-devel] Trouble building alsa-lib
by Takashi Iwai 14 Feb '08

14 Feb '08

At Thu, 14 Feb 2008 10:18:33 -0600, Linux Mercedes wrote: > > Hi Takashi, > > Where should I pass -D_POSIX_C_SOURCE? $ CFLAGS="-O2 -Wall -D_POSIX_C_SOURCE" ./hgcompile ... In the case of csh, use env. Takashi

1 0

[alsa-devel] Trouble building alsa-lib
by Linux Mercedes 14 Feb '08

14 Feb '08

Hi all, I'm trying to build alsa from source. I'm guessing (I was not able to find any instructions on how to build alsa) that I build alsa-lib first. I'm compiling it with gcc 4.2.1. However, when I build it, I get the following errors: In file included from ../../include/local.h:105, from control_local.h:22, from cards.c:35: ../../include/sound/asound.h:148: warning: implicit declaration of function '_IO R' ../../include/sound/asound.h:148: error: expected expression before 'int' ../../include/sound/asound.h:148: error: enumerator value for 'SNDRV_HWDEP_IOCTL _PVERSION' is not an integer constant ../../include/sound/asound.h:149: error: expected expression before 'struct' ../../include/sound/asound.h:149: error: enumerator value for 'SNDRV_HWDEP_IOCTL _INFO' is not an integer constant ../../include/sound/asound.h:150: error: expected expression before 'struct' ../../include/sound/asound.h:150: error: enumerator value for 'SNDRV_HWDEP_IOCTL _DSP_STATUS' is not an integer constant ../../include/sound/asound.h:151: warning: implicit declaration of function '_IO W' ../../include/sound/asound.h:151: error: expected expression before 'struct' ../../include/sound/asound.h:152: error: enumerator value for 'SNDRV_HWDEP_IOCTL _DSP_LOAD' is not an integer constant ../../include/sound/asound.h:471: error: expected expression before 'int' ../../include/sound/asound.h:471: error: enumerator value for 'SNDRV_PCM_IOCTL_P VERSION' is not an integer constant ../../include/sound/asound.h:472: error: expected expression before 'struct' ../../include/sound/asound.h:472: error: enumerator value for 'SNDRV_PCM_IOCTL_I NFO' is not an integer constant ../../include/sound/asound.h:473: error: expected expression before 'int' ../../include/sound/asound.h:473: error: enumerator value for 'SNDRV_PCM_IOCTL_T STAMP' is not an integer constant ../../include/sound/asound.h:474: error: expected expression before 'int' ../../include/sound/asound.h:474: error: enumerator value for 'SNDRV_PCM_IOCTL_T TSTAMP' is not an integer constant ../../include/sound/asound.h:475: warning: implicit declaration of function '_IO WR' ../../include/sound/asound.h:475: error: expected expression before 'struct' ../../include/sound/asound.h:475: error: enumerator value for 'SNDRV_PCM_IOCTL_H W_REFINE' is not an integer constant ../../include/sound/asound.h:476: error: expected expression before 'struct' ../../include/sound/asound.h:476: error: enumerator value for 'SNDRV_PCM_IOCTL_H W_PARAMS' is not an integer constant ../../include/sound/asound.h:477: warning: implicit declaration of function '_IO ' ../../include/sound/asound.h:477: error: enumerator value for 'SNDRV_PCM_IOCTL_H W_FREE' is not an integer constant ../../include/sound/asound.h:478: error: expected expression before 'struct' ../../include/sound/asound.h:478: error: enumerator value for 'SNDRV_PCM_IOCTL_S W_PARAMS' is not an integer constant ../../include/sound/asound.h:479: error: expected expression before 'struct' ../../include/sound/asound.h:479: error: enumerator value for 'SNDRV_PCM_IOCTL_S TATUS' is not an integer constant ../../include/sound/asound.h:480: error: expected expression before 'sndrv_pcm_s frames_t' ../../include/sound/asound.h:480: error: enumerator value for 'SNDRV_PCM_IOCTL_D ELAY' is not an integer constant ../../include/sound/asound.h:481: error: enumerator value for 'SNDRV_PCM_IOCTL_H WSYNC' is not an integer constant ../../include/sound/asound.h:482: error: expected expression before 'struct' ../../include/sound/asound.h:482: error: enumerator value for 'SNDRV_PCM_IOCTL_S YNC_PTR' is not an integer constant ../../include/sound/asound.h:483: error: expected expression before 'struct' ../../include/sound/asound.h:483: error: enumerator value for 'SNDRV_PCM_IOCTL_C HANNEL_INFO' is not an integer constant ../../include/sound/asound.h:484: error: enumerator value for 'SNDRV_PCM_IOCTL_P REPARE' is not an integer constant ../../include/sound/asound.h:485: error: enumerator value for 'SNDRV_PCM_IOCTL_R ESET' is not an integer constant ../../include/sound/asound.h:486: error: enumerator value for 'SNDRV_PCM_IOCTL_S TART' is not an integer constant ../../include/sound/asound.h:487: error: enumerator value for 'SNDRV_PCM_IOCTL_D ROP' is not an integer constant ../../include/sound/asound.h:488: error: enumerator value for 'SNDRV_PCM_IOCTL_D RAIN' is not an integer constant ../../include/sound/asound.h:489: error: expected expression before 'int' ../../include/sound/asound.h:489: error: enumerator value for 'SNDRV_PCM_IOCTL_P AUSE' is not an integer constant ../../include/sound/asound.h:490: error: expected expression before 'sndrv_pcm_u frames_t' ../../include/sound/asound.h:490: error: enumerator value for 'SNDRV_PCM_IOCTL_R EWIND' is not an integer constant ../../include/sound/asound.h:491: error: enumerator value for 'SNDRV_PCM_IOCTL_R ESUME' is not an integer constant ../../include/sound/asound.h:492: error: enumerator value for 'SNDRV_PCM_IOCTL_X RUN' is not an integer constant ../../include/sound/asound.h:493: error: expected expression before 'sndrv_pcm_u frames_t' ../../include/sound/asound.h:493: error: enumerator value for 'SNDRV_PCM_IOCTL_F ORWARD' is not an integer constant ../../include/sound/asound.h:494: error: expected expression before 'struct' ../../include/sound/asound.h:494: error: enumerator value for 'SNDRV_PCM_IOCTL_W RITEI_FRAMES' is not an integer constant ../../include/sound/asound.h:495: error: expected expression before 'struct' ../../include/sound/asound.h:495: error: enumerator value for 'SNDRV_PCM_IOCTL_R EADI_FRAMES' is not an integer constant ../../include/sound/asound.h:496: error: expected expression before 'struct' ../../include/sound/asound.h:496: error: enumerator value for 'SNDRV_PCM_IOCTL_W RITEN_FRAMES' is not an integer constant ../../include/sound/asound.h:497: error: expected expression before 'struct' ../../include/sound/asound.h:497: error: enumerator value for 'SNDRV_PCM_IOCTL_R EADN_FRAMES' is not an integer constant ../../include/sound/asound.h:498: error: expected expression before 'int' ../../include/sound/asound.h:498: error: enumerator value for 'SNDRV_PCM_IOCTL_L INK' is not an integer constant ../../include/sound/asound.h:499: error: enumerator value for 'SNDRV_PCM_IOCTL_U NLINK' is not an integer constant ../../include/sound/asound.h:558: error: expected expression before 'int' ../../include/sound/asound.h:558: error: enumerator value for 'SNDRV_RAWMIDI_IOC TL_PVERSION' is not an integer constant ../../include/sound/asound.h:559: error: expected expression before 'struct' ../../include/sound/asound.h:559: error: enumerator value for 'SNDRV_RAWMIDI_IOC TL_INFO' is not an integer constant ../../include/sound/asound.h:560: error: expected expression before 'struct' ../../include/sound/asound.h:560: error: enumerator value for 'SNDRV_RAWMIDI_IOC TL_PARAMS' is not an integer constant ../../include/sound/asound.h:561: error: expected expression before 'struct' ../../include/sound/asound.h:561: error: enumerator value for 'SNDRV_RAWMIDI_IOC TL_STATUS' is not an integer constant ../../include/sound/asound.h:562: error: expected expression before 'int' ../../include/sound/asound.h:562: error: enumerator value for 'SNDRV_RAWMIDI_IOC TL_DROP' is not an integer constant ../../include/sound/asound.h:563: error: expected expression before 'int' ../../include/sound/asound.h:563: error: enumerator value for 'SNDRV_RAWMIDI_IOC TL_DRAIN' is not an integer constant ../../include/sound/asound.h:673: error: expected expression before 'int' ../../include/sound/asound.h:673: error: enumerator value for 'SNDRV_TIMER_IOCTL _PVERSION' is not an integer constant ../../include/sound/asound.h:674: error: expected expression before 'struct' ../../include/sound/asound.h:674: error: enumerator value for 'SNDRV_TIMER_IOCTL _NEXT_DEVICE' is not an integer constant ../../include/sound/asound.h:675: error: expected expression before 'int' ../../include/sound/asound.h:675: error: enumerator value for 'SNDRV_TIMER_IOCTL _TREAD' is not an integer constant ../../include/sound/asound.h:676: error: expected expression before 'struct' ../../include/sound/asound.h:676: error: enumerator value for 'SNDRV_TIMER_IOCTL _GINFO' is not an integer constant ../../include/sound/asound.h:677: error: expected expression before 'struct' ../../include/sound/asound.h:677: error: enumerator value for 'SNDRV_TIMER_IOCTL _GPARAMS' is not an integer constant ../../include/sound/asound.h:678: error: expected expression before 'struct' ../../include/sound/asound.h:678: error: enumerator value for 'SNDRV_TIMER_IOCTL _GSTATUS' is not an integer constant ../../include/sound/asound.h:679: error: expected expression before 'struct' ../../include/sound/asound.h:679: error: enumerator value for 'SNDRV_TIMER_IOCTL _SELECT' is not an integer constant ../../include/sound/asound.h:680: error: expected expression before 'struct' ../../include/sound/asound.h:680: error: enumerator value for 'SNDRV_TIMER_IOCTL _INFO' is not an integer constant ../../include/sound/asound.h:681: error: expected expression before 'struct' ../../include/sound/asound.h:681: error: enumerator value for 'SNDRV_TIMER_IOCTL _PARAMS' is not an integer constant ../../include/sound/asound.h:682: error: expected expression before 'struct' ../../include/sound/asound.h:682: error: enumerator value for 'SNDRV_TIMER_IOCTL _STATUS' is not an integer constant ../../include/sound/asound.h:684: error: enumerator value for 'SNDRV_TIMER_IOCTL _START' is not an integer constant ../../include/sound/asound.h:685: error: enumerator value for 'SNDRV_TIMER_IOCTL _STOP' is not an integer constant ../../include/sound/asound.h:686: error: enumerator value for 'SNDRV_TIMER_IOCTL _CONTINUE' is not an integer constant ../../include/sound/asound.h:687: error: enumerator value for 'SNDRV_TIMER_IOCTL _PAUSE' is not an integer constant ../../include/sound/asound.h:869: error: expected expression before 'int' ../../include/sound/asound.h:869: error: enumerator value for 'SNDRV_CTL_IOCTL_P VERSION' is not an integer constant ../../include/sound/asound.h:870: error: expected expression before 'struct' ../../include/sound/asound.h:870: error: enumerator value for 'SNDRV_CTL_IOCTL_C ARD_INFO' is not an integer constant ../../include/sound/asound.h:871: error: expected expression before 'struct' ../../include/sound/asound.h:871: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_LIST' is not an integer constant ../../include/sound/asound.h:872: error: expected expression before 'struct' ../../include/sound/asound.h:872: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_INFO' is not an integer constant ../../include/sound/asound.h:873: error: expected expression before 'struct' ../../include/sound/asound.h:873: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_READ' is not an integer constant ../../include/sound/asound.h:874: error: expected expression before 'struct' ../../include/sound/asound.h:874: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_WRITE' is not an integer constant ../../include/sound/asound.h:875: error: expected expression before 'struct' ../../include/sound/asound.h:875: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_LOCK' is not an integer constant ../../include/sound/asound.h:876: error: expected expression before 'struct' ../../include/sound/asound.h:876: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_UNLOCK' is not an integer constant ../../include/sound/asound.h:877: error: expected expression before 'int' ../../include/sound/asound.h:877: error: enumerator value for 'SNDRV_CTL_IOCTL_S UBSCRIBE_EVENTS' is not an integer constant ../../include/sound/asound.h:878: error: expected expression before 'struct' ../../include/sound/asound.h:878: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_ADD' is not an integer constant ../../include/sound/asound.h:879: error: expected expression before 'struct' ../../include/sound/asound.h:879: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_REPLACE' is not an integer constant ../../include/sound/asound.h:880: error: expected expression before 'struct' ../../include/sound/asound.h:880: error: enumerator value for 'SNDRV_CTL_IOCTL_E LEM_REMOVE' is not an integer constant ../../include/sound/asound.h:881: error: expected expression before 'struct' ../../include/sound/asound.h:881: error: enumerator value for 'SNDRV_CTL_IOCTL_T LV_READ' is not an integer constant ../../include/sound/asound.h:882: error: expected expression before 'struct' ../../include/sound/asound.h:882: error: enumerator value for 'SNDRV_CTL_IOCTL_T LV_WRITE' is not an integer constant ../../include/sound/asound.h:883: error: expected expression before 'struct' ../../include/sound/asound.h:883: error: enumerator value for 'SNDRV_CTL_IOCTL_T LV_COMMAND' is not an integer constant ../../include/sound/asound.h:884: error: expected expression before 'int' ../../include/sound/asound.h:884: error: enumerator value for 'SNDRV_CTL_IOCTL_H WDEP_NEXT_DEVICE' is not an integer constant ../../include/sound/asound.h:885: error: expected expression before 'struct' ../../include/sound/asound.h:885: error: enumerator value for 'SNDRV_CTL_IOCTL_H WDEP_INFO' is not an integer constant ../../include/sound/asound.h:886: error: expected expression before 'int' ../../include/sound/asound.h:886: error: enumerator value for 'SNDRV_CTL_IOCTL_P CM_NEXT_DEVICE' is not an integer constant ../../include/sound/asound.h:887: error: expected expression before 'struct' ../../include/sound/asound.h:887: error: enumerator value for 'SNDRV_CTL_IOCTL_P CM_INFO' is not an integer constant ../../include/sound/asound.h:888: error: expected expression before 'int' ../../include/sound/asound.h:888: error: enumerator value for 'SNDRV_CTL_IOCTL_P CM_PREFER_SUBDEVICE' is not an integer constant ../../include/sound/asound.h:889: error: expected expression before 'int' ../../include/sound/asound.h:889: error: enumerator value for 'SNDRV_CTL_IOCTL_R AWMIDI_NEXT_DEVICE' is not an integer constant ../../include/sound/asound.h:890: error: expected expression before 'struct' ../../include/sound/asound.h:890: error: enumerator value for 'SNDRV_CTL_IOCTL_R AWMIDI_INFO' is not an integer constant ../../include/sound/asound.h:891: error: expected expression before 'int' ../../include/sound/asound.h:891: error: enumerator value for 'SNDRV_CTL_IOCTL_R AWMIDI_PREFER_SUBDEVICE' is not an integer constant ../../include/sound/asound.h:892: error: expected expression before 'int' ../../include/sound/asound.h:892: error: enumerator value for 'SNDRV_CTL_IOCTL_P OWER' is not an integer constant ../../include/sound/asound.h:893: error: expected expression before 'int' ../../include/sound/asound.h:893: error: enumerator value for 'SNDRV_CTL_IOCTL_P OWER_STATE' is not an integer constant ../../include/sound/asound.h:949: error: expected expression before 'struct' ../../include/sound/asound.h:949: error: enumerator value for 'SNDRV_IOCTL_READV ' is not an integer constant ../../include/sound/asound.h:950: error: expected expression before 'struct' ../../include/sound/asound.h:950: error: enumerator value for 'SNDRV_IOCTL_WRITE V' is not an integer constant In file included from ../../include/local.h:109, from control_local.h:22, from cards.c:35: ../../include/global.h:137: error: redefinition of 'struct timeval' ../../include/global.h:142: error: redefinition of 'struct timespec' make[2]: *** [cards.lo] Error 1 make[2]: Leaving directory `/nj/alsa-source/alsa-lib/src/control' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/nj/alsa-source/alsa-lib/src' make: *** [all-recursive] Error 1 (I know it's a lot of text, but I'm not sure how much is needed to determine what's wrong, not being overly familiar with alsa myself.) Can someone help me out please? Remember that since I'm using cygwin, it could be as simple as not having all the packages installed. Thanks, Nathan

2 1

[alsa-devel] midi problem
by rmgls＠free.fr 14 Feb '08

14 Feb '08

Hello, upgrading to kernel 2.6.24.1 and alsa-hg-20080213, (libs in sync), on debian: trying to play some midi files, with aplaymidi to: timidity/mpu/rme midi port, i receive the following message: rtc: lost some interrupt at 1024hz perhaps, it's not alsa related but! Do you think it is related to the config? the symptom appeared since 2.6.24 kernel. in case, can you tell me what config options can influence this behaviour, (i have read and applied the low_latency doc), and if this is missing in the doc, to avoid such questions, can you add some words somewhere please? Thanks in advance for reply. rmgls(a)free.fr rmgls(a)free.fr

2 1

[alsa-devel] Trouble building ALSA from source
by Linux Mercedes 13 Feb '08

13 Feb '08

Hi, I'm trying to build ALSA to run on Cygwin. I used rsync to get the source. I then proceeded with the tidbits from the wiki on how to build: run ./configure. However, there is no configure.sh file. So can anyone tell me how to build ALSA? Thanks, Nathan

2 1

[alsa-devel] ca106 driver and six channel with jack
by Michael Westermann 13 Feb '08

13 Feb '08

Hello, i'll use a Crative SB0570 card with the ca106 driver with jackd and 5.1. In qjackctrl I've only see two channles. I've look im the ca106_main.c. In the struct snd_ca0106_playback_hw are the line .channels_max = 2, //6, Is it possible to set channels max to six? Or if anything develpment required? Michael

2 1

[alsa-devel] No recording on hda-intel (AD1981HD)
by Grzegorz Chwesewicz 13 Feb '08

13 Feb '08

Hi. I have a problem with recording on HP nx6325 laptop with hda-intel (AD1981HD codec). The problem is described in [1], and [2], but nobody can help there, so I write here (maybe more developers reads mailing-list ;)). Problem is that arecord, audacity or skype stops recording after 5-10 min. Unloading and loading modules helps, but only for another 5-10 min. What info do you need to debug the problem ? PS. HG version differs only three patches (not related to the bug) from 1.0.16rc2, so I didn't try HG. References: [1] https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2449 [2] https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3542 [3] http://www.analog.com/en/prod/0,2877,AD1981HD,00.html (codec data sheet) Here is output from lspci: ################# BEGIN ################################## 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01) Subsystem: Unknown device 30b0:103c Flags: bus master, slow devsel, latency 64, IRQ 16 Memory at 88000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- ################ END ##################################### Here is output from cat /proc/asound/card0/codec#0: ################# BEGIN ################################## Codec: Analog Devices AD1981 Address: 0 Vendor Id: 0x11d41981 Subsystem Id: 0x103c30b0 Revision Id: 0x100200 No Modem Function Group found Default PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=1 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=1 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x60]: 44100 48000 bits [0x2]: 16 formats [0x5]: PCM AC3 Delay: 3 samples Connection: 2 0x01* 0x04 Node 0x03 [Audio Output] wcaps 0x441: Stereo Converter: stream=5, channel=0 Power: setting=D0, actual=D0 Processing caps: benign=1, ncoeff=70 Node 0x04 [Audio Input] wcaps 0x100511: Stereo Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0x6]: 16 20 formats [0x1]: PCM Power: setting=D0, actual=D0 Connection: 1 0x15 Node 0x05 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x38 0x38] Pincap 0x081173f: IN OUT HP EAPD Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 EAPD 0x2: EAPD Pin Default 0x92174110: [Fixed] Speaker at Int Front Conn = Analog, Color = Green DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x03 0x0e* Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x38 0x38] Pincap 0x081f: OUT HP Detect Trigger ImpSense Pin Default 0x0421201f: [Jack] HP Out at Ext Right Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=37, enabled=1 Connection: 2 0x03 0x0e* Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x410710f0: [N/A] Line Out at Ext Rear Conn = Analog, Color = Black DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Connection: 1 0x0f Node 0x08 [Pin Complex] wcaps 0x400083: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: Pincap 0x081727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x04a12020: [Jack] Mic at Ext Right Conn = 1/8, Color = Grey DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=38, enabled=1 Node 0x09 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0xbf 0xbf] Pincap 0x081737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x0181302e: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0xe Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x03* 0x0e Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x4145f0f0: [N/A] SPDIF Out at Ext Rear Conn = Optical, Color = Other DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x03 0x0c 0x09 0x0e* 0x05 0x18 Node 0x0c [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1e 0x1f Node 0x0d [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x80] Connection: 2 0x10* 0x16 Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo Connection: 8 0x0d 0x11 0x12 0x13 0x1a 0x1b 0x1c 0x1d Node 0x0f [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0b Node 0x10 [Beep Generator Widget] wcaps 0x700000: Mono Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f] Connection: 1 0x03 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x08 Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x09 Node 0x14 [Power Widget] wcaps 0x500500: Mono Power: setting=D0, actual=D0 Connection: 13 0x0d* 0x0e 0x0f 0x10 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1d Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Connection: 8 0x0c* 0x09 0x0e 0x0f 0x19 0x05 0x18 0x17 Node 0x16 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x995711f0: [Fixed] Digital Out at Int ATAPI Conn = Analog, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x17 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0827: IN Detect Trigger ImpSense Pin Default 0x5993e0f0: [N/A] Aux at Int ATAPI Conn = ATAPI, Color = White DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Node 0x18 [Pin Complex] wcaps 0x400187: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x91a79121: [Fixed] Mic at Int Rear Conn = Analog, Color = Pink DefAssociation = 0x2, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 2 0x03* 0x0e Node 0x19 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x593310f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Black DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x05 Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x17 Node 0x1c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x18 Node 0x1d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x19 Node 0x1e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x08 Node 0x1f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Connection: 1 0x18 ################ END ##################################### # uname -a Linux ensima-hp 2.6.24 #18 SMP PREEMPT Sun Feb 3 01:19:45 CET 2008 i686 AMD Turion(tm) 64 X2 Mobile Technology TL-56 AuthenticAMD GNU/Linux # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC) alsa-headers-1.0.16_rc2 alsa-lib-1.0.16_rc2 alsa-utils-1.0.16_rc1 -- Greetings Grzegorz Chwesewicz, Chilan mailto:grzegorz.chwesewicz@chilan.com

3 13

[alsa-devel] [ALSA] HDA: no sound in headphone-out caused by commit f889fa91ad47e (2.6.25-rc1 regression)
by Matej Laitl 13 Feb '08

13 Feb '08

Hi, after upgrading from 2.6.24 to 2.6.25-rc1, I lost headphone-out sound output of my Intel HDA card - it is quiet no matter what the mixer settings are. After playing wit git bisect a bit, I narrowed it down to commit f889fa91ad47e "[ALSA] hda-codec - Improve the auto-configuration". [1] It works okay with tree as of previous commit 69b1f1e8337fc9. First lines from /proc/asound/Intel/codec#0: Codec: Realtek ALC262 Address: 0 Vendor Id: 0x10ec0262 Subsystem Id: 0x17340000 Revision Id: 0x100202 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 The box is Fujitsu-Siemens Esprimo Mobile M9400 laptop. [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h… Regards, Matej Laitl

2 18

[alsa-devel] Open bugs
by Natalie Protasevich 12 Feb '08

12 Feb '08

Hello, The bugs listed are over a month old, and haven't been addressed yet. It would be appreciated if corresponding maintainers identify whether the bugs have been fixed, or need to be worked on, and take appropriate action. In most cases, reporters are standing by and ready to provide information and necessary testing. Thanks! Memory Management======================================= swapping in 2.6.24-rc5-git3 http://bugzilla.kernel.org/show_bug.cgi?id=9592 Date: 12/07/2007 Regression Summary: # /proc/sys/vm# cat swappiness 0 but scp-ing 2GB file causes many processes are swapped out due to increase of the file cache size. Was looked at by Jan Kara <jack(a)suse.cz>; KAMEZAWA Hiroyuki <kamezawa.hiroyu(a)jp.fujitsu.com> - commented I/O-Storage================================================ SATA DVD drive & UDF filesystem problem http://bugzilla.kernel.org/show_bug.cgi?id=9668 12/31/2007 Summary: I mount dvd discs (udf) with piix and ide_cd modules without problem (on hw decribed higher). Then I put NEC drive to new mainboard (ICH9 + jmicron SATA/PATA chips) and use ahci (jmicron) + sr_mod modules. SCSI====================================================== Problems on booting http://bugzilla.kernel.org/show_bug.cgi?id=9621 Date: 12/22/2007 Regression Summary: The boot stops / hangs on hardware detection of SCSI. I have an InitioINI-9X00U/UW When I have an usb key sticked in /dev/sba, and run lilo then, then it dont boot but give L99 99 99 99 ... error Resetting RAID attached to a FC Switch causes kernel panic and crash http://bugzilla.kernel.org/show_bug.cgi?id=9598 12/18/2007 Hardware Environment:SunFire X4200 - 2 x dual core AMD Opteron CPUs, 8GB Ram, Qlogic FC adapter. Summary: Resetting the RAID box causes the X4200 to crash. 3ware 9650SE -8LPML not recognized by 3w-9xxx driver http://bugzilla.kernel.org/show_bug.cgi?id=8908 08/19/2007 Problem Description: The 3w-9xxx kernel driver for 3ware 9xxx SATA RAID Controller series did not recognize the 3ware 9650SE-8LPML SATA RAID Controller. Plarform=================================================== kexec buffer error http://bugzilla.kernel.org/show_bug.cgi?id=9693 Date: 01/04/2008 Regression Summary: Close of /boot/kernel-2.6.24-rc6-git11 failed: : buffer error kexec load failed, error = 1 20000+ wake-ups/second in 2.6.24 http://bugzilla.kernel.org/show_bug.cgi?id=9489 Date: 12/02/2007 Summary: "something" is causing the system to go into a state where the cpu throws us right out of the C-state the kernel asks for Discussed: Arjan van de Ven, Mark Lord VIDEO/FB====================================================== No text consoles with FRAMEBUFFER_CONSOLE_DETECT_PRIMARY http://bugzilla.kernel.org/show_bug.cgi?id=9310 11/05/2007 still there Regression Summary: After initial boot messages all output to console stops. The last visible messages are: checking if image is initramfs...<6>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 After that, nothing until XOrg starts up and graphical login/desktop on VT7are displayed normal. DVB=========================================================== DVB-T Pluto2: SUSPEND/RESUME methods are missing for this driver 04/05/2007 - still present in 2.6.24 http://bugzilla.kernel.org/show_bug.cgi?id=8304 Summary: After SWSUPS resume, pluto2 card is not started properly, led getts not green and card is unable load tda firmware Hardware Environment: Acer TravelMate No one looked at it yet. Several Pluto bug: DVB-T Pluto2 && PCI: When playing in dmesg I often getts: "pluto2 0000:03:00.0: overflow irq (10)" Date: 11/08/2006 still there http://bugzilla.kernel.org/show_bug.cgi?id=7473 Hardware Environment: Acer TravelMate DVB-T Pluto2: Getting tons of "card hung up :(" messages when card is removed from pcmcia slot Date: 11/08/2006 - still there http://bugzilla.kernel.org/show_bug.cgi?id=7472 DVB-T Pluto2: Unable to change MUX Date: 11/08/2006 http://bugzilla.kernel.org/show_bug.cgi?id=7471 KNC1 DVB-C cam module not working on driver load Date: 1/15/2007 - still there http://bugzilla.kernel.org/show_bug.cgi?id=7825 Error: DVB: registering new adapter (KNC1 DVB-C) adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff KNC1-0: MAC addr = 00:09:d6:6d:5a:f0 TDA10021: i2c-addr = 0x0c, id = 0x7c DVB: registering frontend 0 (Philips TDA10021 DVB-C)... budget-av: ci interface initialised. budget-av: cam inserted A dvb_ca adaptor 0: PC card did not respond :( build #341 failed for 2.6.24-rc6-g1842c7f in linux/./drivers/media/dvb/ttpci/budget-av.c 01/01/2008 http://bugzilla.kernel.org/show_bug.cgi?id=9671 Still there in 2.6.24.. has it been fixed? DVB-USB UMT-010 driver has certain oops when installed 01/09/2008 http://bugzilla.kernel.org/show_bug.cgi?id=9720 In the umt-010 driver the struct umt_properties sets the number of URBs for transfer to 20. But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10. This causes an oops for all devices which use the umt-010 chipset when they are inserted. v4l Problem with dvb-usb and Hauppage USB Stick http://bugzilla.kernel.org/show_bug.cgi?id=9001 9/9/2007 x86_64 dvb-usb: Hauppauge Nova-T Stick crashes during channel search with Kaffeine KEXEC============================================================= kexec buffer error http://bugzilla.kernel.org/show_bug.cgi?id=9693 01/05/2008 2.6.24-rc6-git9 works as expected. git10 fails with root device not found DRIVERS=========================================================== Two small bugs detected by code review: physmap does not have a release() function 01/05/2008 http://bugzilla.kernel.org/show_bug.cgi?id=9690 Summary: Pretty trivial addition of the release() hgafb module is broken & unmaintained http://bugzilla.kernel.org/show_bug.cgi?id=9689 This one also needs release() function FILESYSTEMS====================================================== journal_data mount option causes filesystem corruption with blocksize != 4096 01/05/2008 http://bugzilla.kernel.org/show_bug.cgi?id=9692 Appears to be e2fsck problem ALSA============================================================== SC-5200 + wine = System freeze http://bugzilla.kernel.org/show_bug.cgi?id=9649 12/27/2007 -- Motherboard: Asus A8R-MVP -- Harddrive: Samsung 200Gb -- Soundcard 1: Onboard -- Soundcard 2: Trust SC-5200 Running any part of wine freezes up the whole system. Both SSH connections, the normal X screen and any other device, including sound played by for example music players, freezes up. After about 10 seconds the system reboots. By removing my second sound card it works. By disabling my onboard sound it still causes the freeze. Networking========================================================= An ioctl to delete an ipv6 tunnel leads to a kernel panic http://bugzilla.kernel.org/show_bug.cgi?id=8895 8/16/2007 Summary: The mip6d HA was modified to make a redundancy evolution, when an HA is interrupted, the other takes over, this leads to some creation/deletion of routes and tunnels. BUG: bad unlock balance detected! http://bugzilla.kernel.org/show_bug.cgi?id=9542 Date: 12/11/2007 Summary: ...bug in the bonding driver...bond->lock should always turn BH off, even on read lock. Handled: Herbert Xu Problem and solution has been identified, but the bug stalled - probably needs someone to submit an actual patch WIRELESS========================================================== IWL3945 generates WARNING in mac80211/rx.c code http://bugzilla.kernel.org/show_bug.cgi?id=9656 12/28/2007 WARNING: at net/mac80211/rx.c:1486 __ieee80211_rx() Pid: 0, comm: swapper Not tainted 2.6.24-rc6 #8 Call Trace: <IRQ> [<ffffffff88123d89>] :mac80211:__ieee80211_rx+0xc69/0xd30 [<ffffffff812abd86>] _spin_lock_irqsave+0x26/0xa0 [<ffffffff812ac3a5>] _spin_unlock_irqrestore+0x15/0x30 [<ffffffff8815af91>] :iwl3945:iwl_rx_queue_restock+0xd1/0x160 [<ffffffff812abd86>] _spin_lock_irqsave+0x26/0xa0 [<ffffffff88114f7b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120 [<ffffffff810420a7>] tasklet_action+0x47/0xb0 [<ffffffff81041fb9>] __do_softirq+0x59/0xd0 [<ffffffff8100d5dc>] call_softirq+0x1c/0x30 [<ffffffff8100f975>] do_softirq+0x35/0x90 [<ffffffff81041ee5>] irq_exit+0x85/0x90 [<ffffffff8100fa54>] do_IRQ+0x84/0x100 [<ffffffff8100c931>] ret_from_intr+0x0/0xa <EOI> [<ffffffff811a312f>] acpi_idle_enter_bm+0x272/0x2de [<ffffffff811a3125>] acpi_idle_enter_bm+0x268/0x2de [<ffffffff81230357>] cpuidle_idle_call+0x97/0xd0 [<ffffffff812302c0>] cpuidle_idle_call+0x0/0xd0 [<ffffffff8100b001>] cpu_idle+0x71/0xe0 NFS/RPC=================================================== in-kernel rpc generates broken RPCBPROC_GETVERSADDR v4 requests http://bugzilla.kernel.org/show_bug.cgi?id=8891 8/15/2007 Problem Description: When locking a file, an invalid RPCBPROC_GETVERSADDR procedure call is sent out Chuck Lever looked at it a while ago

2 2

[alsa-devel] LADSPA plugin in ALSA pcm-plugin layer
by van der Linden 12 Feb '08

12 Feb '08

Hi, I'm trying to use a LADSPA plugin in the pcm-plugin layer of the ALSA userspace library. However I get an error saying ALSA needs two control ports (input and output) while the plugin only has one input control port. What could be the problem? Thanks for your help E-J Below are all the details: I'm running the software on a Blackfin DSP processor with uCLinux. The plugin is obtained from LADSPA org. The tools analyseplugin and applyplugin (as delivered within the LADSPA SDK) do work correctly. I use the amp.so plugin. The error: ---------------------------------------------------------------------- Use 'aplay' with LADSPA plugin : error because of missing output control ---------------------------------------------------------------------- root:~> aplay -D myladspa test.wav Init AMP plugin AMP ladspa descriptor, index = 0 AMP ladspa descriptor, index = 1 ALSA lib ../../../alsa-lib-1.0.12/src/pcm/pcm_ladspa.c:1361:(snd_pcm_ladspa_parse_ioconfig) error adding default controls aplay: main:550: audio open error: Cannot allocate memory The plugin info: ---------------------------------------------------------------------- AMP.SO plugin info ---------------------------------------------------------------------- root:~> analyseplugin amp.so Init AMP plugin AMP ladspa descriptor, index = 0 Plugin Name: "Mono Amplifier" Plugin Label: "amp_mono" Plugin Unique ID: 1048 Maker: "Richard Furse (LADSPA example plugins)" Copyright: "None" Must Run Real-Time: No Has activate() Function: No Has deactivate() Function: No Has run_adding() Function: No Environment: Normal or Hard Real-Time Ports: "Gain" input, control, 0 to ..., default 1, logarithmic <== one input control port "Input" input, audio "Output" output, audio AMP ladspa descriptor, index = 1 Plugin Name: "Stereo Amplifier" Plugin Label: "amp_stereo" Plugin Unique ID: 1049 Maker: "Richard Furse (LADSPA example plugins)" Copyright: "None" Must Run Real-Time: No Has activate() Function: No Has deactivate() Function: No Has run_adding() Function: No Environment: Normal or Hard Real-Time Ports: "Gain" input, control, 0 to ..., default 1, logarithmic <== one input control port "Input (Left)" input, audio "Output (Left)" output, audio "Input (Right)" input, audio "Output (Right)" output, audio AMP ladspa descriptor, index = 2 The config file: ---------------------------------------------------------------------- asound.conf ---------------------------------------------------------------------- pcm.myladspa{ type ladspa slave { pcm default } path "/usr/lib/ladspa"; plugins [ { label "amp_stereo" filename "amp.so" policy "duplicate" output { controls[1] } input { controls[1] } } ] } ctl.myladspa{ type hw card 0 } ALSA always tries to open a input and output control port... ---------------------------------------------------------------------- pcm_ladspa.c ---------------------------------------------------------------------- --- snd_pcm_ladspa_parse_ioconfig is always called, for input AND output control --- in function snd_pcm_ladspa_add_plugin (line 1512): err = snd_pcm_ladspa_parse_ioconfig(lplug, &lplug->input, input); if (err < 0) return err; err = snd_pcm_ladspa_parse_ioconfig(lplug, &lplug->output, output); if (err < 0) return err; I think here might be an error or is it agreed a plugin ALWAYS has two control ports... ---------------------------------------------------------------------- pcm_ladspa.c ---------------------------------------------------------------------- --- if no output control found, calloc (0, sizeof...) results in -ENOMEM error --- static int snd_pcm_ladspa_add_default_controls(snd_pcm_ladspa_plugin_t *lplug, snd_pcm_ladspa_plugin_io_t *io) { unsigned int count = 0; LADSPA_Data *array; unsigned char *initialized; unsigned long idx; for (idx = 0; idx < lplug->desc->PortCount; idx++) if ((lplug->desc->PortDescriptors[idx] & (io->pdesc | LADSPA_PORT_CONTROL)) == (io->pdesc | LADSPA_PORT_CONTROL)) count++; array = (LADSPA_Data *)calloc(count, sizeof(LADSPA_Data)); if (!array) return -ENOMEM;

1 0