October 2008 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] snd-hda-intel overly loud when using OSS interface
by Jan Engelhardt 04 Oct '08

04 Oct '08

Hi, [don't forget to Cc me] I've got a Dell Precision 390 workstation, onboard sound running with snd-hda-intel module. 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1b.0 0403: 8086:27d8 (rev 01) When audio is output using the OSS interface (mpg123 or mplayer -ao oss), output is overly loud and the PCM mixer control has no effect. Master tuned in to 13% (alsamixer says dB gain=-40.50) is about the level as when using the ALSA interface running with Master 58% (dB gain=-19.50) with PCM 63% (dB gain=-19.50). $ uname -a Linux nuqneh 2.6.24-19-generic #1 SMP Thu Jul 10 22:38:03 PDT 2008 x86_64 GNU/Linux /proc/asound: $ cat cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xefffc000 irq 16 $ cat devices 0: [ 0] : control 1: : sequencer 4: [ 0- 0]: hardware dependent 16: [ 0- 0]: digital audio playback 24: [ 0- 0]: digital audio capture 33: : timer $ cat hwdep 00-00: HDA Codec 0 $ cat modules 0 snd_hda_intel $ cat pcm 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1 $ cat timers G0: system timer : 4000.000us (10000000 ticks) P0-0-0: PCM playback 0-0-0 : SLAVE Client application 22482 : running P0-0-1: PCM capture 0-0-1 : SLAVE $ cat version Advanced Linux Sound Architecture Driver Version 1.0.16. Compiled on Jul 11 2008 for kernel 2.6.24-19-generic (SMP). $ cat /proc/asound/card0/codec#0 Codec: SigmaTel STAC9200 Address: 0 Vendor Id: 0x83847690 Subsystem Id: 0x102801de Revision Id: 0x102201 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 GPIO: io=4, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x02 [Audio Output] wcaps 0xd0401: Stereo Converter: stream=5, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x0a Processing caps: benign=0, ncoeff=0 Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Connection: 1 0x08 Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x1e0]: 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Delay: 3 samples Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L Connection: 3 0x02* 0x08 0x0a Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x0810024: IN EAPD Detect EAPD 0x0: Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Delay: 3 samples Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x400001f1: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 2 0x05* 0x0a Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x0c Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x12 0x12] Connection: 1 0x07 Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 5 0x10* 0x0f 0x0e 0x0d 0x12 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x083f: IN OUT HP Detect Trigger ImpSense Pin Default 0x02214030: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=30, enabled=1 Connection: 1 0x0b Node 0x0e [Pin Complex] wcaps 0x400181: Stereo Pincap 0x083f: IN OUT HP Detect Trigger ImpSense Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Detect Trigger ImpSense Pin Default 0x02a19020: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x10 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x01a19021: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x00] Pincap 0x0810: OUT Pin Default 0x90100140: [Fixed] Speaker at Int N/A Conn = Unknown, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 1 0x13 Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x01813122: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x13 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x07 Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00]

2 1

[alsa-devel] [PATCH 7/7] ASoC: Add audio support for the Atmel AT91SAM9G20ek board(uing wolfson 8731).
by Sedji Gaouaou 03 Oct '08

03 Oct '08

Add audio support for the Atmel AT91SAM9G20ek board(uing wolfson 8731). It is based on the former eti_b1_wm8731.c file, using the atmel scc API. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/sam9g20_wm8731.c | 329 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 329 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/sam9g20_wm8731.c diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c new file mode 100644 index 0000000..4e191df --- /dev/null +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -0,0 +1,329 @@ +/* + * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based + * ATMEL AT91SAM9G20ek board. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on ati_b1_wm8731.c by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * Based on corgi.c by: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/hardware.h> +#include <mach/gpio.h> + +#include "../codecs/wm8731.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + int ret; + + /* codec system clock is supplied by PCK0, set to 12MHz */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, + 12000000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + + dev_dbg(rtd->socdev->dev, "shutdown"); +} + +static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct atmel_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + int ret; + + unsigned int rate; + int cmr_div, period; + + if (ssc == NULL) { + printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* + * The SSC clock dividers depend on the sample rate. The CMR.DIV + * field divides the system master clock MCK to drive the SSC TK + * signal which provides the codec BCLK. The TCMR.PERIOD and + * RCMR.PERIOD fields further divide the BCLK signal to drive + * the SSC TF and RF signals which provide the codec DACLRC and + * ADCLRC clocks. + * + * The dividers were determined through trial and error, where a + * CMR.DIV value is chosen such that the resulting BCLK value is + * divisible, or almost divisible, by (2 * sample rate), and then + * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1. + */ + rate = params_rate(params); + + switch (rate) { + case 8000: + cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */ + period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */ + break; + case 11025: + cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */ + period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */ + break; + case 16000: + cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */ + period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */ + break; + case 22050: + cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */ + period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */ + break; + case 32000: + cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */ + period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */ + break; + case 44100: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */ + break; + case 48000: + cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */ + period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */ + break; + case 88200: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */ + break; + case 96000: + cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */ + period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */ + break; + default: + printk(KERN_WARNING "unsupported rate %d" + " on at91sam9g20ek board\n", rate); + return -EINVAL; + } + + /* set the MCK divider for BCLK */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div); + if (ret < 0) + return ret; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* set the BCLK divider for DACLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_TCMR_PERIOD, period); + } else { + /* set the BCLK divider for ADCLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_RCMR_PERIOD, period); + } + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops at91sam9g20ek_ops = { + .startup = at91sam9g20ek_startup, + .hw_params = at91sam9g20ek_hw_params, + .shutdown = at91sam9g20ek_shutdown, +}; + + +static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static const struct snd_soc_dapm_route intercon[] = { + + /* speaker connected to LHPOUT */ + {"Ext Spk", NULL, "LHPOUT"}, + + /* mic is connected to Mic Jack, with WM8731 Mic Bias */ + {"MICIN", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Int Mic"}, +}; + +/* + * Logic for a wm8731 as connected on a at91sam9g20ek board. + */ +static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec) +{ + printk(KERN_DEBUG + "at91sam9g20ek_wm8731 " + ": at91sam9g20ek_wm8731_init() called\n"); + + /* Add specific widgets */ + snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets, + ARRAY_SIZE(at91sam9g20ek_dapm_widgets)); + /* Set up specific audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + /* not connected */ + snd_soc_dapm_disable_pin(codec, "RLINEIN"); + snd_soc_dapm_disable_pin(codec, "LLINEIN"); + + /* always connected */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link at91sam9g20ek_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai = &atmel_ssc_dai[0], + .codec_dai = &wm8731_dai, + .init = at91sam9g20ek_wm8731_init, + .ops = &at91sam9g20ek_ops, +}; + +static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { + .name = "WM8731", + .dai_link = &at91sam9g20ek_dai, + .num_links = 1, +}; + +static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { + .i2c_bus = 0, + .i2c_address = 0x1b, +}; + +static struct snd_soc_device at91sam9g20ek_snd_devdata = { + .machine = &snd_soc_machine_at91sam9g20ek, + .platform = &atmel_soc_platform, + .codec_dev = &soc_codec_dev_wm8731, + .codec_data = &at91sam9g20ek_wm8731_setup, +}; + +static struct platform_device *at91sam9g20ek_snd_device; + +static int __init at91sam9g20ek_init(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + int ret; + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); + if (!at91sam9g20ek_snd_device) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + ret = -ENOMEM; + } + + platform_set_drvdata(at91sam9g20ek_snd_device, + &at91sam9g20ek_snd_devdata); + at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev; + + ret = platform_device_add(at91sam9g20ek_snd_device); + if (ret) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + platform_device_put(at91sam9g20ek_snd_device); + } + + return ret; + +err_ssc: + return ret; +} + +static void __exit at91sam9g20ek_exit(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + platform_device_unregister(at91sam9g20ek_snd_device); + at91sam9g20ek_snd_device = NULL; +} + +module_init(at91sam9g20ek_init); +module_exit(at91sam9g20ek_exit); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731"); +MODULE_LICENSE("GPL"); -- 1.5.3.7 >From 0f63f310868d8135d091c9ac5eff679f7b34b894 Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> Date: Fri, 3 Oct 2008 11:53:59 +0200 Subject: [PATCH] Add audio support for the Atmel AT91SAM9G20ek board(uing wolfson 8731). Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/sam9g20_wm8731.c | 329 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 329 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/sam9g20_wm8731.c diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c new file mode 100644 index 0000000..4e191df --- /dev/null +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -0,0 +1,329 @@ +/* + * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based + * ATMEL AT91SAM9G20ek board. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on ati_b1_wm8731.c by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * Based on corgi.c by: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/hardware.h> +#include <mach/gpio.h> + +#include "../codecs/wm8731.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + int ret; + + /* codec system clock is supplied by PCK0, set to 12MHz */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, + 12000000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + + dev_dbg(rtd->socdev->dev, "shutdown"); +} + +static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct atmel_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + int ret; + + unsigned int rate; + int cmr_div, period; + + if (ssc == NULL) { + printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* + * The SSC clock dividers depend on the sample rate. The CMR.DIV + * field divides the system master clock MCK to drive the SSC TK + * signal which provides the codec BCLK. The TCMR.PERIOD and + * RCMR.PERIOD fields further divide the BCLK signal to drive + * the SSC TF and RF signals which provide the codec DACLRC and + * ADCLRC clocks. + * + * The dividers were determined through trial and error, where a + * CMR.DIV value is chosen such that the resulting BCLK value is + * divisible, or almost divisible, by (2 * sample rate), and then + * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1. + */ + rate = params_rate(params); + + switch (rate) { + case 8000: + cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */ + period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */ + break; + case 11025: + cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */ + period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */ + break; + case 16000: + cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */ + period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */ + break; + case 22050: + cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */ + period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */ + break; + case 32000: + cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */ + period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */ + break; + case 44100: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */ + break; + case 48000: + cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */ + period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */ + break; + case 88200: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */ + break; + case 96000: + cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */ + period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */ + break; + default: + printk(KERN_WARNING "unsupported rate %d" + " on at91sam9g20ek board\n", rate); + return -EINVAL; + } + + /* set the MCK divider for BCLK */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div); + if (ret < 0) + return ret; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* set the BCLK divider for DACLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_TCMR_PERIOD, period); + } else { + /* set the BCLK divider for ADCLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_RCMR_PERIOD, period); + } + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops at91sam9g20ek_ops = { + .startup = at91sam9g20ek_startup, + .hw_params = at91sam9g20ek_hw_params, + .shutdown = at91sam9g20ek_shutdown, +}; + + +static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static const struct snd_soc_dapm_route intercon[] = { + + /* speaker connected to LHPOUT */ + {"Ext Spk", NULL, "LHPOUT"}, + + /* mic is connected to Mic Jack, with WM8731 Mic Bias */ + {"MICIN", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Int Mic"}, +}; + +/* + * Logic for a wm8731 as connected on a at91sam9g20ek board. + */ +static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec) +{ + printk(KERN_DEBUG + "at91sam9g20ek_wm8731 " + ": at91sam9g20ek_wm8731_init() called\n"); + + /* Add specific widgets */ + snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets, + ARRAY_SIZE(at91sam9g20ek_dapm_widgets)); + /* Set up specific audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + /* not connected */ + snd_soc_dapm_disable_pin(codec, "RLINEIN"); + snd_soc_dapm_disable_pin(codec, "LLINEIN"); + + /* always connected */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link at91sam9g20ek_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai = &atmel_ssc_dai[0], + .codec_dai = &wm8731_dai, + .init = at91sam9g20ek_wm8731_init, + .ops = &at91sam9g20ek_ops, +}; + +static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { + .name = "WM8731", + .dai_link = &at91sam9g20ek_dai, + .num_links = 1, +}; + +static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { + .i2c_bus = 0, + .i2c_address = 0x1b, +}; + +static struct snd_soc_device at91sam9g20ek_snd_devdata = { + .machine = &snd_soc_machine_at91sam9g20ek, + .platform = &atmel_soc_platform, + .codec_dev = &soc_codec_dev_wm8731, + .codec_data = &at91sam9g20ek_wm8731_setup, +}; + +static struct platform_device *at91sam9g20ek_snd_device; + +static int __init at91sam9g20ek_init(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + int ret; + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); + if (!at91sam9g20ek_snd_device) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + ret = -ENOMEM; + } + + platform_set_drvdata(at91sam9g20ek_snd_device, + &at91sam9g20ek_snd_devdata); + at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev; + + ret = platform_device_add(at91sam9g20ek_snd_device); + if (ret) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + platform_device_put(at91sam9g20ek_snd_device); + } + + return ret; + +err_ssc: + return ret; +} + +static void __exit at91sam9g20ek_exit(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + platform_device_unregister(at91sam9g20ek_snd_device); + at91sam9g20ek_snd_device = NULL; +} + +module_init(at91sam9g20ek_init); +module_exit(at91sam9g20ek_exit); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731"); +MODULE_LICENSE("GPL"); -- 1.5.3.7

1 0

[alsa-devel] [PATCH 6/7] ASoC: Change include files at32-pcm.h and at32-ssc.h to new atmel_ssc_dai.h and atmel-pcm.h.
by Sedji Gaouaou 03 Oct '08

03 Oct '08

Change include files at32-pcm.h and at32-ssc.h(in playpaq_wm8510.c) to new atmel_ssc_dai.h and atmel-pcm.h. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/playpaq_wm8510.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index 7e6560b..ffad18f 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -40,8 +40,8 @@ #include <mach/portmux.h> #include "../codecs/wm8510.h" -#include "at32-pcm.h" -#include "at32-ssc.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" /*-------------------------------------------------------------------------*\ -- 1.5.3.7 >From 35c348266d0ddf8e47c3cf25a5db8ada2ff0a639 Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> Date: Fri, 3 Oct 2008 16:10:47 +0200 Subject: [PATCH] Change include files at32-pcm.h and at32-ssc.h to new atmel_ssc_dai.h and atmel-pcm.h. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/playpaq_wm8510.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index 7e6560b..ffad18f 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -40,8 +40,8 @@ #include <mach/portmux.h> #include "../codecs/wm8510.h" -#include "at32-pcm.h" -#include "at32-ssc.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" /*-------------------------------------------------------------------------*\ -- 1.5.3.7

1 0

[alsa-devel] [PATCH 5/7] ASoC: Move the file playpaq_wm8510.c from sound/soc/at32 directory to the new sound/soc/atmel directory.
by Sedji Gaouaou 03 Oct '08

03 Oct '08

Move the file playpaq_wm8510.c from sound/soc/at32 directory to the new sound/soc/atmel directory. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/playpaq_wm8510.c | 523 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 523 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/playpaq_wm8510.c diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c new file mode 100644 index 0000000..ffad18f --- /dev/null +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -0,0 +1,523 @@ +/* sound/soc/at32/playpaq_wm8510.c + * ASoC machine driver for PlayPaq using WM8510 codec + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum(a)acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c + * + * NOTE: If you don't have the AT32 enhanced portmux configured (which + * isn't currently in the mainline or Atmel patched kernel), you will + * need to set the MCLK pin (PA30) to peripheral A in your board initialization + * code. Something like: + * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + * + */ + +/* #define DEBUG */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/at32ap700x.h> +#include <mach/portmux.h> + +#include "../codecs/wm8510.h" +#include "at32-pcm.h" +#include "at32-ssc.h" + + +/*-------------------------------------------------------------------------*\ + * constants +\*-------------------------------------------------------------------------*/ +#define MCLK_PIN GPIO_PIN_PA(30) +#define MCLK_PERIPH GPIO_PERIPH_A + + +/*-------------------------------------------------------------------------*\ + * data types +\*-------------------------------------------------------------------------*/ +/* SSC clocking data */ +struct ssc_clock_data { + /* CMR div */ + unsigned int cmr_div; + + /* Frame period (as needed by xCMR.PERIOD) */ + unsigned int period; + + /* The SSC clock rate these settings where calculated for */ + unsigned long ssc_rate; +}; + + +/*-------------------------------------------------------------------------*\ + * module data +\*-------------------------------------------------------------------------*/ +static struct clk *_gclk0; +static struct clk *_pll0; + +#define CODEC_CLK (_gclk0) + + +/*-------------------------------------------------------------------------*\ + * Sound SOC operations +\*-------------------------------------------------------------------------*/ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE +static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + struct ssc_clock_data cd; + unsigned int rate, width_bits, channels; + unsigned int bitrate, ssc_div; + unsigned actual_rate; + + + /* + * Figure out required bitrate + */ + rate = params_rate(params); + channels = params_channels(params); + width_bits = snd_pcm_format_physical_width(params_format(params)); + bitrate = rate * width_bits * channels; + + + /* + * Figure out required SSC divider and period for required bitrate + */ + cd.ssc_rate = clk_get_rate(ssc->clk); + ssc_div = cd.ssc_rate / bitrate; + cd.cmr_div = ssc_div / 2; + if (ssc_div & 1) { + /* round cmr_div up */ + cd.cmr_div++; + } + cd.period = width_bits - 1; + + + /* + * Find actual rate, compare to requested rate + */ + actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); + pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", + rate, actual_rate); + + + return cd; +} +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + +static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + unsigned int pll_out = 0, bclk = 0, mclk_div = 0; + int ret; + + + /* Due to difficulties with getting the correct clocks from the AT32's + * PLL0, we're going to let the CODEC be in charge of all the clocks + */ +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); +#else + struct ssc_clock_data cd; + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); +#endif + + if (ssc == NULL) { + pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + + /* + * Figure out PLL and BCLK dividers for WM8510 + */ + switch (params_rate(params)) { + case 48000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 44100: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 22050: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_2; + bclk = WM8510_BCLKDIV_8; + break; + + case 16000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_3; + bclk = WM8510_BCLKDIV_8; + break; + + case 11025: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_4; + bclk = WM8510_BCLKDIV_8; + break; + + case 8000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_6; + bclk = WM8510_BCLKDIV_8; + break; + + default: + pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", + params_rate(params)); + return -EINVAL; + } + + + /* + * set CPU and CODEC DAI configuration + */ + ret = snd_soc_dai_set_fmt(codec_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CODEC DAI format (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU DAI format (%d)\n", + ret); + return ret; + } + + + /* + * Set CPU clock configuration + */ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); + pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", + cd.cmr_div, cd.period); + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, + cd.period); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU transmit period (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + /* + * Set CODEC clock configuration + */ + pr_debug("playpaq_wm8510: " + "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", + clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); + + +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); + if (ret < 0) { + pr_warning + ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + ret = snd_soc_dai_set_pll(codec_dai, 0, + clk_get_rate(CODEC_CLK), pll_out); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", + ret); + return ret; + } + + + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", + ret); + return ret; + } + + + return 0; +} + + + +static struct snd_soc_ops playpaq_wm8510_ops = { + .hw_params = playpaq_wm8510_hw_params, +}; + + + +static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + + + +static const char *intercon[][3] = { + /* speaker connected to SPKOUT */ + {"Ext Spk", NULL, "SPKOUTP"}, + {"Ext Spk", NULL, "SPKOUTN"}, + + {"Mic Bias", NULL, "Int Mic"}, + {"MICN", NULL, "Mic Bias"}, + {"MICP", NULL, "Mic Bias"}, + + /* Terminator */ + {NULL, NULL, NULL}, +}; + + + +static int playpaq_wm8510_init(struct snd_soc_codec *codec) +{ + int i; + + /* + * Add DAPM widgets + */ + for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); + + + + /* + * Setup audio path interconnects + */ + for (i = 0; intercon[i][0] != NULL; i++) { + snd_soc_dapm_connect_input(codec, + intercon[i][0], + intercon[i][1], intercon[i][2]); + } + + + /* always connected pins */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + snd_soc_dapm_sync(codec); + + + + /* Make CSB show PLL rate */ + snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, + WM8510_OPCLKDIV_1 | 4); + + return 0; +} + + + +static struct snd_soc_dai_link playpaq_wm8510_dai = { + .name = "WM8510", + .stream_name = "WM8510 PCM", + .cpu_dai = &at32_ssc_dai[0], + .codec_dai = &wm8510_dai, + .init = playpaq_wm8510_init, + .ops = &playpaq_wm8510_ops, +}; + + + +static struct snd_soc_machine snd_soc_machine_playpaq = { + .name = "LRS_PlayPaq_WM8510", + .dai_link = &playpaq_wm8510_dai, + .num_links = 1, +}; + + + +static struct wm8510_setup_data playpaq_wm8510_setup = { + .i2c_bus = 0, + .i2c_address = 0x1a, +}; + + + +static struct snd_soc_device playpaq_wm8510_snd_devdata = { + .machine = &snd_soc_machine_playpaq, + .platform = &at32_soc_platform, + .codec_dev = &soc_codec_dev_wm8510, + .codec_data = &playpaq_wm8510_setup, +}; + +static struct platform_device *playpaq_snd_device; + + +static int __init playpaq_asoc_init(void) +{ + int ret = 0; + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + + /* + * Configure MCLK for WM8510 + */ + _gclk0 = clk_get(NULL, "gclk0"); + if (IS_ERR(_gclk0)) { + _gclk0 = NULL; + goto err_gclk0; + } + _pll0 = clk_get(NULL, "pll0"); + if (IS_ERR(_pll0)) { + _pll0 = NULL; + goto err_pll0; + } + if (clk_set_parent(_gclk0, _pll0)) { + pr_warning("snd-soc-playpaq: " + "Failed to set PLL0 as parent for DAC clock\n"); + goto err_set_clk; + } + clk_set_rate(CODEC_CLK, 12000000); + clk_enable(CODEC_CLK); + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); +#endif + + + /* + * Create and register platform device + */ + playpaq_snd_device = platform_device_alloc("soc-audio", 0); + if (playpaq_snd_device == NULL) { + ret = -ENOMEM; + goto err_device_alloc; + } + + platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); + playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; + + ret = platform_device_add(playpaq_snd_device); + if (ret) { + pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", + ret); + goto err_device_add; + } + + return 0; + + +err_device_add: + if (playpaq_snd_device != NULL) { + platform_device_put(playpaq_snd_device); + playpaq_snd_device = NULL; + } +err_device_alloc: +err_set_clk: + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } +err_pll0: + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } +err_gclk0: + if (ssc != NULL) { + ssc_free(ssc); + ssc = NULL; + } +err_ssc: + return ret; +} + + +static void __exit playpaq_asoc_exit(void) +{ + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_free_pin(MCLK_PIN); +#endif + + platform_device_unregister(playpaq_snd_device); + playpaq_snd_device = NULL; +} + +module_init(playpaq_asoc_init); +module_exit(playpaq_asoc_exit); + +MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); +MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); +MODULE_LICENSE("GPL"); -- 1.5.3.7 >From fd41c4ea4989e64238c45170d54fd06c4551f865 Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> Date: Fri, 3 Oct 2008 11:52:39 +0200 Subject: [PATCH] Move the file playpaq_wm8510.c from sound/soc/at32 directory to the new sound/soc/atmel directory. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/playpaq_wm8510.c | 523 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 523 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/playpaq_wm8510.c diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c new file mode 100644 index 0000000..ffad18f --- /dev/null +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -0,0 +1,523 @@ +/* sound/soc/at32/playpaq_wm8510.c + * ASoC machine driver for PlayPaq using WM8510 codec + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum(a)acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c + * + * NOTE: If you don't have the AT32 enhanced portmux configured (which + * isn't currently in the mainline or Atmel patched kernel), you will + * need to set the MCLK pin (PA30) to peripheral A in your board initialization + * code. Something like: + * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + * + */ + +/* #define DEBUG */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/at32ap700x.h> +#include <mach/portmux.h> + +#include "../codecs/wm8510.h" +#include "at32-pcm.h" +#include "at32-ssc.h" + + +/*-------------------------------------------------------------------------*\ + * constants +\*-------------------------------------------------------------------------*/ +#define MCLK_PIN GPIO_PIN_PA(30) +#define MCLK_PERIPH GPIO_PERIPH_A + + +/*-------------------------------------------------------------------------*\ + * data types +\*-------------------------------------------------------------------------*/ +/* SSC clocking data */ +struct ssc_clock_data { + /* CMR div */ + unsigned int cmr_div; + + /* Frame period (as needed by xCMR.PERIOD) */ + unsigned int period; + + /* The SSC clock rate these settings where calculated for */ + unsigned long ssc_rate; +}; + + +/*-------------------------------------------------------------------------*\ + * module data +\*-------------------------------------------------------------------------*/ +static struct clk *_gclk0; +static struct clk *_pll0; + +#define CODEC_CLK (_gclk0) + + +/*-------------------------------------------------------------------------*\ + * Sound SOC operations +\*-------------------------------------------------------------------------*/ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE +static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + struct ssc_clock_data cd; + unsigned int rate, width_bits, channels; + unsigned int bitrate, ssc_div; + unsigned actual_rate; + + + /* + * Figure out required bitrate + */ + rate = params_rate(params); + channels = params_channels(params); + width_bits = snd_pcm_format_physical_width(params_format(params)); + bitrate = rate * width_bits * channels; + + + /* + * Figure out required SSC divider and period for required bitrate + */ + cd.ssc_rate = clk_get_rate(ssc->clk); + ssc_div = cd.ssc_rate / bitrate; + cd.cmr_div = ssc_div / 2; + if (ssc_div & 1) { + /* round cmr_div up */ + cd.cmr_div++; + } + cd.period = width_bits - 1; + + + /* + * Find actual rate, compare to requested rate + */ + actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); + pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", + rate, actual_rate); + + + return cd; +} +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + +static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + unsigned int pll_out = 0, bclk = 0, mclk_div = 0; + int ret; + + + /* Due to difficulties with getting the correct clocks from the AT32's + * PLL0, we're going to let the CODEC be in charge of all the clocks + */ +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); +#else + struct ssc_clock_data cd; + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); +#endif + + if (ssc == NULL) { + pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + + /* + * Figure out PLL and BCLK dividers for WM8510 + */ + switch (params_rate(params)) { + case 48000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 44100: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 22050: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_2; + bclk = WM8510_BCLKDIV_8; + break; + + case 16000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_3; + bclk = WM8510_BCLKDIV_8; + break; + + case 11025: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_4; + bclk = WM8510_BCLKDIV_8; + break; + + case 8000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_6; + bclk = WM8510_BCLKDIV_8; + break; + + default: + pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", + params_rate(params)); + return -EINVAL; + } + + + /* + * set CPU and CODEC DAI configuration + */ + ret = snd_soc_dai_set_fmt(codec_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CODEC DAI format (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU DAI format (%d)\n", + ret); + return ret; + } + + + /* + * Set CPU clock configuration + */ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); + pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", + cd.cmr_div, cd.period); + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, + cd.period); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU transmit period (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + /* + * Set CODEC clock configuration + */ + pr_debug("playpaq_wm8510: " + "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", + clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); + + +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); + if (ret < 0) { + pr_warning + ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + ret = snd_soc_dai_set_pll(codec_dai, 0, + clk_get_rate(CODEC_CLK), pll_out); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", + ret); + return ret; + } + + + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", + ret); + return ret; + } + + + return 0; +} + + + +static struct snd_soc_ops playpaq_wm8510_ops = { + .hw_params = playpaq_wm8510_hw_params, +}; + + + +static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + + + +static const char *intercon[][3] = { + /* speaker connected to SPKOUT */ + {"Ext Spk", NULL, "SPKOUTP"}, + {"Ext Spk", NULL, "SPKOUTN"}, + + {"Mic Bias", NULL, "Int Mic"}, + {"MICN", NULL, "Mic Bias"}, + {"MICP", NULL, "Mic Bias"}, + + /* Terminator */ + {NULL, NULL, NULL}, +}; + + + +static int playpaq_wm8510_init(struct snd_soc_codec *codec) +{ + int i; + + /* + * Add DAPM widgets + */ + for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); + + + + /* + * Setup audio path interconnects + */ + for (i = 0; intercon[i][0] != NULL; i++) { + snd_soc_dapm_connect_input(codec, + intercon[i][0], + intercon[i][1], intercon[i][2]); + } + + + /* always connected pins */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + snd_soc_dapm_sync(codec); + + + + /* Make CSB show PLL rate */ + snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, + WM8510_OPCLKDIV_1 | 4); + + return 0; +} + + + +static struct snd_soc_dai_link playpaq_wm8510_dai = { + .name = "WM8510", + .stream_name = "WM8510 PCM", + .cpu_dai = &at32_ssc_dai[0], + .codec_dai = &wm8510_dai, + .init = playpaq_wm8510_init, + .ops = &playpaq_wm8510_ops, +}; + + + +static struct snd_soc_machine snd_soc_machine_playpaq = { + .name = "LRS_PlayPaq_WM8510", + .dai_link = &playpaq_wm8510_dai, + .num_links = 1, +}; + + + +static struct wm8510_setup_data playpaq_wm8510_setup = { + .i2c_bus = 0, + .i2c_address = 0x1a, +}; + + + +static struct snd_soc_device playpaq_wm8510_snd_devdata = { + .machine = &snd_soc_machine_playpaq, + .platform = &at32_soc_platform, + .codec_dev = &soc_codec_dev_wm8510, + .codec_data = &playpaq_wm8510_setup, +}; + +static struct platform_device *playpaq_snd_device; + + +static int __init playpaq_asoc_init(void) +{ + int ret = 0; + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + + /* + * Configure MCLK for WM8510 + */ + _gclk0 = clk_get(NULL, "gclk0"); + if (IS_ERR(_gclk0)) { + _gclk0 = NULL; + goto err_gclk0; + } + _pll0 = clk_get(NULL, "pll0"); + if (IS_ERR(_pll0)) { + _pll0 = NULL; + goto err_pll0; + } + if (clk_set_parent(_gclk0, _pll0)) { + pr_warning("snd-soc-playpaq: " + "Failed to set PLL0 as parent for DAC clock\n"); + goto err_set_clk; + } + clk_set_rate(CODEC_CLK, 12000000); + clk_enable(CODEC_CLK); + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); +#endif + + + /* + * Create and register platform device + */ + playpaq_snd_device = platform_device_alloc("soc-audio", 0); + if (playpaq_snd_device == NULL) { + ret = -ENOMEM; + goto err_device_alloc; + } + + platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); + playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; + + ret = platform_device_add(playpaq_snd_device); + if (ret) { + pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", + ret); + goto err_device_add; + } + + return 0; + + +err_device_add: + if (playpaq_snd_device != NULL) { + platform_device_put(playpaq_snd_device); + playpaq_snd_device = NULL; + } +err_device_alloc: +err_set_clk: + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } +err_pll0: + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } +err_gclk0: + if (ssc != NULL) { + ssc_free(ssc); + ssc = NULL; + } +err_ssc: + return ret; +} + + +static void __exit playpaq_asoc_exit(void) +{ + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_free_pin(MCLK_PIN); +#endif + + platform_device_unregister(playpaq_snd_device); + playpaq_snd_device = NULL; +} + +module_init(playpaq_asoc_init); +module_exit(playpaq_asoc_exit); + +MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); +MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); +MODULE_LICENSE("GPL"); -- 1.5.3.7

1 0

[alsa-devel] [PATCH 4/7] ASoC: Add files to manage the pcm interface for all atmel boards.
by Sedji Gaouaou 03 Oct '08

03 Oct '08

Add files to manage the pcm interface for all atmel boards(merge between sound/soc/at91 sound/soc/at32). As well as the atmel_ssc_dai file, it will use the common atmel_ssc API. This file is based on at32-pcm. and at91-pcm.c. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/atmel-pcm.c | 484 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/atmel-pcm.h | 86 ++++++++ 2 files changed, 570 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/atmel-pcm.c create mode 100644 sound/soc/atmel/atmel-pcm.h diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c new file mode 100644 index 0000000..6d317d2 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.c @@ -0,0 +1,484 @@ +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" + + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, +}; + + +/*--------------------------------------------------------------------------*\ + * Data types +\*--------------------------------------------------------------------------*/ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ + + /* PDC register save */ + u32 pdc_xpr_save; + u32 pdc_xcr_save; + u32 pdc_xnpr_save; + u32 pdc_xncr_save; +}; + + +/*--------------------------------------------------------------------------*\ + * Helper functions +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = atmel_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + pr_debug("atmel-pcm:" + "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, + (void *) buf->addr, + size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} +/*--------------------------------------------------------------------------*\ + * ISR +\*--------------------------------------------------------------------------*/ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + static int count = 0; + + count++; + + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warning("atmel-pcm: buffer %s on %s" + " (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + snd_pcm_period_elapsed(substream); +} + + +/*--------------------------------------------------------------------------*\ + * PCM operations +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params */ + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = rtd->dai->cpu_dai->dma_data; + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + pr_debug("atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%u, period_size=%u)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); + return 0; +} + +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + return 0; +} + +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + int ret = 0; + + pr_debug("atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %u\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + pr_debug("atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + pr_debug("sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + +static int atmel_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + out: + return ret; +} + +static int atmel_pcm_close(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, +}; + + +/*--------------------------------------------------------------------------*\ + * ASoC platform driver +\*--------------------------------------------------------------------------*/ +static u64 atmel_pcm_dmamask = 0xffffffff; + +static int atmel_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + int ret = 0; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &atmel_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->capture.channels_min) { + pr_debug("at32-pcm:" + "Allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} + +static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +#ifdef CONFIG_PM +static int atmel_pcm_suspend(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* disable the PDC and save the PDC registers */ + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + + prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); + prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); + prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); + prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); + + return 0; +} + +static int atmel_pcm_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* restore the PDC registers and enable the PDC */ + ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); + ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); + ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + return 0; +} +#else +#define atmel_pcm_suspend NULL +#define atmel_pcm_resume NULL +#endif + +struct snd_soc_platform atmel_soc_platform = { + .name = "atmel-audio", + .pcm_ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free_dma_buffers, + .suspend = atmel_pcm_suspend, + .resume = atmel_pcm_resume, +}; +EXPORT_SYMBOL_GPL(atmel_soc_platform); + +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("Atmel PCM module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 0000000..ec9b282 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,86 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include <linux/atmel-ssc.h> + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +extern struct snd_soc_platform atmel_soc_platform; + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* _ATMEL_PCM_H */ -- 1.5.3.7 >From 37a7a3d9f7c652f1912e448949b8173118144a20 Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> Date: Fri, 3 Oct 2008 11:39:03 +0200 Subject: [PATCH] Add files to manage the pcm interface for all atmel boards(merge between sound/soc/at91 sound/soc/at32) Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/atmel-pcm.c | 484 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/atmel-pcm.h | 86 ++++++++ 2 files changed, 570 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/atmel-pcm.c create mode 100644 sound/soc/atmel/atmel-pcm.h diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c new file mode 100644 index 0000000..6d317d2 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.c @@ -0,0 +1,484 @@ +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" + + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, +}; + + +/*--------------------------------------------------------------------------*\ + * Data types +\*--------------------------------------------------------------------------*/ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ + + /* PDC register save */ + u32 pdc_xpr_save; + u32 pdc_xcr_save; + u32 pdc_xnpr_save; + u32 pdc_xncr_save; +}; + + +/*--------------------------------------------------------------------------*\ + * Helper functions +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = atmel_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + pr_debug("atmel-pcm:" + "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, + (void *) buf->addr, + size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} +/*--------------------------------------------------------------------------*\ + * ISR +\*--------------------------------------------------------------------------*/ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + static int count = 0; + + count++; + + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warning("atmel-pcm: buffer %s on %s" + " (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + snd_pcm_period_elapsed(substream); +} + + +/*--------------------------------------------------------------------------*\ + * PCM operations +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params */ + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = rtd->dai->cpu_dai->dma_data; + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + pr_debug("atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%u, period_size=%u)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); + return 0; +} + +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + return 0; +} + +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + int ret = 0; + + pr_debug("atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %u\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + pr_debug("atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + pr_debug("sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + +static int atmel_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + out: + return ret; +} + +static int atmel_pcm_close(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, +}; + + +/*--------------------------------------------------------------------------*\ + * ASoC platform driver +\*--------------------------------------------------------------------------*/ +static u64 atmel_pcm_dmamask = 0xffffffff; + +static int atmel_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + int ret = 0; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &atmel_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->capture.channels_min) { + pr_debug("at32-pcm:" + "Allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} + +static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +#ifdef CONFIG_PM +static int atmel_pcm_suspend(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* disable the PDC and save the PDC registers */ + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + + prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); + prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); + prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); + prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); + + return 0; +} + +static int atmel_pcm_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* restore the PDC registers and enable the PDC */ + ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); + ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); + ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + return 0; +} +#else +#define atmel_pcm_suspend NULL +#define atmel_pcm_resume NULL +#endif + +struct snd_soc_platform atmel_soc_platform = { + .name = "atmel-audio", + .pcm_ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free_dma_buffers, + .suspend = atmel_pcm_suspend, + .resume = atmel_pcm_resume, +}; +EXPORT_SYMBOL_GPL(atmel_soc_platform); + +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("Atmel PCM module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 0000000..ec9b282 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,86 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include <linux/atmel-ssc.h> + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +extern struct snd_soc_platform atmel_soc_platform; + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* _ATMEL_PCM_H */ -- 1.5.3.7

1 0

[alsa-devel] [PATCH 3/7] ASoC: Add files in the new sound/soc/atmel directory to manage the DAI ssc for all atmel boards.
by Sedji Gaouaou 03 Oct '08

03 Oct '08

Add files in the new sound/soc/atmel directory to manage the DAI ssc for all atmel boards. It is based on at91-ssc and at32-ssc files. It will use the same ssc API across all the atmel platforms. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/atmel_ssc_dai.c | 782 +++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/atmel_ssc_dai.h | 121 ++++++ 2 files changed, 903 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/atmel_ssc_dai.c create mode 100644 sound/soc/atmel/atmel_ssc_dai.h diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 0000000..df02f2b --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,782 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir_mask = SSC_DIR_MASK_PLAYBACK; + else + dir_mask = SSC_DIR_MASK_CAPTURE; + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + + +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou(a)atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 0000000..a828746 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,121 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; +}; +extern struct snd_soc_dai atmel_ssc_dai[]; + +#endif /* _AT91_SSC_DAI_H */ -- 1.5.3.7 >From eeb6c1281d60b5bdebcc7327d5c758f29139ac5e Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> Date: Fri, 3 Oct 2008 17:47:26 +0200 Subject: [PATCH] Add files in the new sound/soc/atmel directory to manage the DAI ssc for all atmel boards. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/atmel_ssc_dai.c | 782 +++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/atmel_ssc_dai.h | 121 ++++++ 2 files changed, 903 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/atmel_ssc_dai.c create mode 100644 sound/soc/atmel/atmel_ssc_dai.h diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 0000000..df02f2b --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,782 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir_mask = SSC_DIR_MASK_PLAYBACK; + else + dir_mask = SSC_DIR_MASK_CAPTURE; + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + + +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou(a)atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 0000000..a828746 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,121 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; +}; +extern struct snd_soc_dai atmel_ssc_dai[]; + +#endif /* _AT91_SSC_DAI_H */ -- 1.5.3.7

1 0

[alsa-devel] [PATCH 2/7] ASoC: Add new directory: sound/soc/atmel
by Sedji Gaouaou 03 Oct '08

03 Oct '08

Add new directory: sound/soc/atmel which is a merge between sound/soc/at91 and sound/soc/at32. Add Makefile and Kconfig for this directory. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/Kconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/Makefile | 15 +++++++++++++++ 2 files changed, 58 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/Kconfig create mode 100644 sound/soc/atmel/Makefile diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 0000000..170d9da --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,43 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on ARCH_AT91 || AVR32 + help + Say Y or M if you want to add support for codecs attached to + the ATMEL SSC interface. You will also need + to select the audio interfaces to support below. + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile new file mode 100644 index 0000000..f54a7cc --- /dev/null +++ b/sound/soc/atmel/Makefile @@ -0,0 +1,15 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-objs := atmel-pcm.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o -- 1.5.3.7 >From 2443ad5a23c54948ed86f774538b65ad69ff37ee Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> Date: Fri, 3 Oct 2008 11:25:36 +0200 Subject: [PATCH] Add new directry: sound/soc/atmel which is a merge between sound/soc/at91 and sound/soc/at32. Add Makefile and Kconfig for this directory. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/atmel/Kconfig | 43 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/Makefile | 15 +++++++++++++++ 2 files changed, 58 insertions(+), 0 deletions(-) create mode 100644 sound/soc/atmel/Kconfig create mode 100644 sound/soc/atmel/Makefile diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 0000000..170d9da --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,43 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on ARCH_AT91 || AVR32 + help + Say Y or M if you want to add support for codecs attached to + the ATMEL SSC interface. You will also need + to select the audio interfaces to support below. + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile new file mode 100644 index 0000000..f54a7cc --- /dev/null +++ b/sound/soc/atmel/Makefile @@ -0,0 +1,15 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-objs := atmel-pcm.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o -- 1.5.3.7

1 0

[alsa-devel] [PATCH 1/7] ASoC: Change Makefile and Kconfig to support atmel avr32 and at91 merging into a single atmel directory.
by Sedji Gaouaou 03 Oct '08

03 Oct '08

Change Makefile and Kconfig to support atmel avr32 and at91 merging into a single atmel directory. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/Kconfig | 3 +-- sound/soc/Makefile | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 4dfda66..615ebf0 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -23,8 +23,7 @@ config SND_SOC_AC97_BUS bool # All the supported Soc's -source "sound/soc/at32/Kconfig" -source "sound/soc/at91/Kconfig" +source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index d849349..4d475c3 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,5 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ +obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/ obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/ -- 1.5.3.7 >From ec6e9878520679b27381cad11dd07f10fb9ce426 Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> Date: Thu, 2 Oct 2008 19:51:31 +0200 Subject: [PATCH] Change Makefile and Kconfig to support atmel avr32 and at91 merging into a single atmel directory. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/Kconfig | 3 +-- sound/soc/Makefile | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 4dfda66..615ebf0 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -23,8 +23,7 @@ config SND_SOC_AC97_BUS bool # All the supported Soc's -source "sound/soc/at32/Kconfig" -source "sound/soc/at91/Kconfig" +source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index d849349..4d475c3 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,5 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ +obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/ obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/ -- 1.5.3.7

1 0

Re: [alsa-devel] [Alsa-user] em28xx_alsa: disagrees about version of symbol xxx after upgrading CentOS 5.2 ALSA .14 for ALSA .17
by Robert Vincent Krakora 03 Oct '08

03 Oct '08

All: I have searched on the web and it seems that at least one person has overcome the problem I am having by rebuilding soundcore.ko (See here: http://redmonk.com/sogrady/2008/04/29/sog-1-busted-sound-0-getting-audio-wo…). There is a sound_core.c in the ALSA tar ball. Why doesn't ALSA rebuild the soundcore.ko module? The functions that em28xx_alsa is complaining about reside in soundcore.ko according to my research. Basically, I downloaded .18rc3 driver, lib and util and configured, built and installed. I rebooted and em28xx_alsa complained that symbols that resided down in soundcore.ko did not jive with the versions of the same symbols for which it was trying to resolve linkages. I rebuilt the video4linux code, reinstalled and rebooted and the problem was still present. It looks as though one should be able to build an new soundcore.ko with a ALSA package but there are no instructions on how to do so. Please help!!! Best Regards, -- Rob Krakora Software Engineer MessageNet Systems 101 East Carmel Dr. Suite 105 Carmel, IN 46032 (317)566-1677 Ext. 206 (317)663-0808 Fax

1 0

[alsa-devel] [PATCH] Adds custom SOC_SINGLE_TLV for tlv320aic23 codec
by Arun KS 03 Oct '08

03 Oct '08

Replaces SOC_ENUM with custom SOC_SINGLE_TLV for Sidetone volume Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- sound/soc/codecs/tlv320aic23.c | 53 +++++++++++++++++++++++++++++++++++++--- 1 files changed, 49 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index c2d35e9..bb7cfb8 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -113,7 +113,6 @@ static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg, static const char *rec_src_text[] = { "Line", "Mic" }; static const char *deemph_text[] = {"None", "32Khz", "44.1Khz", "48Khz"}; -static const char *sidetone_text[] = {"-6db", "-9db", "-12db", "-18db", "0db"}; static const struct soc_enum rec_src_enum = SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 2, 2, rec_src_text); @@ -125,11 +124,56 @@ static const struct soc_enum tlv320aic23_rec_src = SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 2, 2, rec_src_text); static const struct soc_enum tlv320aic23_deemph = SOC_ENUM_SINGLE(TLV320AIC23_DIGT, 1, 4, deemph_text); -static const struct soc_enum tlv320aic23_sidetone = - SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 6, 5, sidetone_text); static const DECLARE_TLV_DB_SCALE(out_gain_tlv, -12100, 100, 0); static const DECLARE_TLV_DB_SCALE(input_gain_tlv, -1725, 75, 0); +static const DECLARE_TLV_DB_SCALE(sidetone_vol_tlv, -1800, 300, 0); + +static int snd_soc_tlv320aic23_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + u16 val, reg; + + val = (ucontrol->value.integer.value[0] & 0x07); + + /* linear conversion to userspace + * 000 = -6db + * 001 = -9db + * 010 = -12db + * 011 = -18db (Min) + * 100 = 0db (Max) + */ + val = (val >= 4) ? 4 : (3 - val); + + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_ANLG) & (~0x1C0); + tlv320aic23_write(codec, TLV320AIC23_ANLG, reg | (val << 6)); + + return 0; +} + +static int snd_soc_tlv320aic23_get_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + u16 val; + + val = tlv320aic23_read_reg_cache(codec, TLV320AIC23_ANLG) & (0x1C0); + val = val >> 6; + val = (val >= 4) ? 4 : (3 - val); + ucontrol->value.integer.value[0] = val; + return 0; + +} + +#define SOC_TLV320AIC23_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ + SNDRV_CTL_ELEM_ACCESS_READWRITE,\ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw, .get = snd_soc_tlv320aic23_get_volsw,\ + .put = snd_soc_tlv320aic23_put_volsw, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } static const struct snd_kcontrol_new tlv320aic23_snd_controls[] = { SOC_DOUBLE_R_TLV("Digital Playback Volume", TLV320AIC23_LCHNVOL, @@ -141,7 +185,8 @@ static const struct snd_kcontrol_new tlv320aic23_snd_controls[] = { TLV320AIC23_RINVOL, 0, 31, 0, input_gain_tlv), SOC_SINGLE("Mic Input Switch", TLV320AIC23_ANLG, 1, 1, 1), SOC_SINGLE("Mic Booster Switch", TLV320AIC23_ANLG, 0, 1, 0), - SOC_ENUM("Sidetone Gain", tlv320aic23_sidetone), + SOC_TLV320AIC23_SINGLE_TLV("Sidetone Volume", TLV320AIC23_ANLG, + 6, 4, 0, sidetone_vol_tlv), SOC_ENUM("Playback De-emphasis", tlv320aic23_deemph), }; -- 1.5.3.4

2 1

[alsa-devel] More ASoC updates
by Mark Brown 03 Oct '08

03 Oct '08

The following changes since commit ddaea5119fd2efde7b3936d4ccfa34c4201be0d3: Takashi Iwai (1): Merge branch 'asoc-fixes' into topic/asoc are available in the git repository at: git://opensource.wolfsonmicro.com/linux-2.6-asoc for-tiwai There's more to come on the TLV320AIC23 but at this point it's all cleanups and it's much easier to review incremental patches. Arun KS (3): ASoC: Add TLV320AIC23 codec driver ASoC: Add support for osk5912 ASoC: Add DSP DAI format support to the OMAP McBSP driver sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320aic23.c | 670 ++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic23.h | 122 ++++++++ sound/soc/omap/Kconfig | 8 + sound/soc/omap/Makefile | 2 + sound/soc/omap/omap-mcbsp.c | 5 + sound/soc/omap/osk5912.c | 232 ++++++++++++++ 8 files changed, 1046 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/tlv320aic23.c create mode 100644 sound/soc/codecs/tlv320aic23.h create mode 100644 sound/soc/omap/osk5912.c

2 4

[alsa-devel] [PATCH 1/5 v2] ASoC Add TLV320AIC23 codec driver
by Arun KS 03 Oct '08

03 Oct '08

ASoC codec driver for TLV320AIC23 device Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320aic23.c | 670 ++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic23.h | 122 ++++++++ 4 files changed, 799 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/tlv320aic23.c create mode 100644 sound/soc/codecs/tlv320aic23.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0507fcf..bdead2d 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -7,6 +7,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_AK4535 select SND_SOC_CS4270 select SND_SOC_SSM2602 + select SND_SOC_TLV320AIC23 select SND_SOC_TLV320AIC26 select SND_SOC_TLV320AIC3X select SND_SOC_UDA1380 @@ -62,6 +63,10 @@ config SND_SOC_CS4270_VD33_ERRATA config SND_SOC_SSM2602 tristate +config SND_SOC_TLV320AIC23 + tristate + depends on I2C + config SND_SOC_TLV320AIC26 tristate "TI TLV320AIC26 Codec support" depends on SND_SOC && SPI diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 0731844..90f0a58 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -4,6 +4,7 @@ snd-soc-ad73311-objs := ad73311.o snd-soc-ak4535-objs := ak4535.o snd-soc-cs4270-objs := cs4270.o snd-soc-ssm2602-objs := ssm2602.o +snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic26-objs := tlv320aic26.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o snd-soc-uda1380-objs := uda1380.o @@ -25,6 +26,7 @@ obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o +obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c new file mode 100644 index 0000000..c2d35e9 --- /dev/null +++ b/sound/soc/codecs/tlv320aic23.c @@ -0,0 +1,670 @@ +/* + * ALSA SoC TLV320AIC23 codec driver + * + * Author: Arun KS, <arunks(a)mistralsolutions.com> + * Copyright: (C) 2008 Mistral Solutions Pvt Ltd., + * + * Based on sound/soc/codecs/wm8731.c by Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Notes: + * The AIC23 is a driver for a low power stereo audio + * codec tlv320aic23 + * + * The machine layer should disable unsupported inputs/outputs by + * snd_soc_dapm_disable_pin(codec, "LHPOUT"), etc. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> + +#include "tlv320aic23.h" + +#define AUDIO_NAME "tlv320aic23" +#define AIC23_VERSION "0.1" + +struct tlv320aic23_srate_reg_info { + u32 sample_rate; + u8 control; /* SR3, SR2, SR1, SR0 and BOSR */ + u8 divider; /* if 0 CLKIN = MCLK, if 1 CLKIN = MCLK/2 */ +}; + +/* + * AIC23 register cache + */ +static const u16 tlv320aic23_reg[] = { + 0x0097, 0x0097, 0x00F9, 0x00F9, /* 0 */ + 0x001A, 0x0004, 0x0007, 0x0001, /* 4 */ + 0x0020, 0x0000, 0x0000, 0x0000, /* 8 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 12 */ +}; + +/* + * read tlv320aic23 register cache + */ +static inline unsigned int tlv320aic23_read_reg_cache(struct snd_soc_codec + *codec, unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg >= ARRAY_SIZE(tlv320aic23_reg)) + return -1; + return cache[reg]; +} + +/* + * write tlv320aic23 register cache + */ +static inline void tlv320aic23_write_reg_cache(struct snd_soc_codec *codec, + u8 reg, u16 value) +{ + u16 *cache = codec->reg_cache; + if (reg >= ARRAY_SIZE(tlv320aic23_reg)) + return; + cache[reg] = value; +} + +/* + * write to the tlv320aic23 register space + */ +static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + + u8 data; + + /* TLV320AIC23 has 7 bit address and 9 bits of data + * so we need to switch one data bit into reg and rest + * of data into val + */ + + if ((reg < 0 || reg > 9) && (reg != 15)) { + printk(KERN_WARNING "%s Invalid register R%d\n", __func__, reg); + return -1; + } + + data = (reg << 1) | (value >> 8 & 0x01); + + tlv320aic23_write_reg_cache(codec, reg, value); + + if (codec->hw_write(codec->control_data, data, + (value & 0xff)) == 0) + return 0; + + printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__, + value, reg); + + return -EIO; +} + +static const char *rec_src_text[] = { "Line", "Mic" }; +static const char *deemph_text[] = {"None", "32Khz", "44.1Khz", "48Khz"}; +static const char *sidetone_text[] = {"-6db", "-9db", "-12db", "-18db", "0db"}; + +static const struct soc_enum rec_src_enum = + SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 2, 2, rec_src_text); + +static const struct snd_kcontrol_new tlv320aic23_rec_src_mux_controls = +SOC_DAPM_ENUM("Input Select", rec_src_enum); + +static const struct soc_enum tlv320aic23_rec_src = + SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 2, 2, rec_src_text); +static const struct soc_enum tlv320aic23_deemph = + SOC_ENUM_SINGLE(TLV320AIC23_DIGT, 1, 4, deemph_text); +static const struct soc_enum tlv320aic23_sidetone = + SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 6, 5, sidetone_text); + +static const DECLARE_TLV_DB_SCALE(out_gain_tlv, -12100, 100, 0); +static const DECLARE_TLV_DB_SCALE(input_gain_tlv, -1725, 75, 0); + +static const struct snd_kcontrol_new tlv320aic23_snd_controls[] = { + SOC_DOUBLE_R_TLV("Digital Playback Volume", TLV320AIC23_LCHNVOL, + TLV320AIC23_RCHNVOL, 0, 127, 0, out_gain_tlv), + SOC_SINGLE("Digital Playback Switch", TLV320AIC23_DIGT, 3, 1, 1), + SOC_DOUBLE_R("Line Input Switch", TLV320AIC23_LINVOL, + TLV320AIC23_RINVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("Line Input Volume", TLV320AIC23_LINVOL, + TLV320AIC23_RINVOL, 0, 31, 0, input_gain_tlv), + SOC_SINGLE("Mic Input Switch", TLV320AIC23_ANLG, 1, 1, 1), + SOC_SINGLE("Mic Booster Switch", TLV320AIC23_ANLG, 0, 1, 0), + SOC_ENUM("Sidetone Gain", tlv320aic23_sidetone), + SOC_ENUM("Playback De-emphasis", tlv320aic23_deemph), +}; + +/* add non dapm controls */ +static int tlv320aic23_add_controls(struct snd_soc_codec *codec) +{ + + int err, i; + + for (i = 0; i < ARRAY_SIZE(tlv320aic23_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&tlv320aic23_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + + return 0; + +} + +/* PGA Mixer controls for Line and Mic switch */ +static const struct snd_kcontrol_new tlv320aic23_output_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Bypass Switch", TLV320AIC23_ANLG, 3, 1, 0), + SOC_DAPM_SINGLE("Mic Sidetone Switch", TLV320AIC23_ANLG, 5, 1, 0), + SOC_DAPM_SINGLE("Playback Switch", TLV320AIC23_ANLG, 4, 1, 0), +}; + +static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = { + SND_SOC_DAPM_DAC("DAC", "Playback", TLV320AIC23_PWR, 3, 1), + SND_SOC_DAPM_ADC("ADC", "Capture", TLV320AIC23_PWR, 2, 1), + SND_SOC_DAPM_MUX("Capture Source", SND_SOC_NOPM, 0, 0, + &tlv320aic23_rec_src_mux_controls), + SND_SOC_DAPM_MIXER("Output Mixer", TLV320AIC23_PWR, 4, 1, + &tlv320aic23_output_mixer_controls[0], + ARRAY_SIZE(tlv320aic23_output_mixer_controls)), + SND_SOC_DAPM_PGA("Line Input", TLV320AIC23_PWR, 0, 1, NULL, 0), + SND_SOC_DAPM_PGA("Mic Input", TLV320AIC23_PWR, 1, 1, NULL, 0), + + SND_SOC_DAPM_OUTPUT("LHPOUT"), + SND_SOC_DAPM_OUTPUT("RHPOUT"), + SND_SOC_DAPM_OUTPUT("LOUT"), + SND_SOC_DAPM_OUTPUT("ROUT"), + + SND_SOC_DAPM_INPUT("LLINEIN"), + SND_SOC_DAPM_INPUT("RLINEIN"), + + SND_SOC_DAPM_INPUT("MICIN"), +}; + +static const struct snd_soc_dapm_route intercon[] = { + /* Output Mixer */ + {"Output Mixer", "Line Bypass Switch", "Line Input"}, + {"Output Mixer", "Playback Switch", "DAC"}, + {"Output Mixer", "Mic Sidetone Switch", "Mic Input"}, + + /* Outputs */ + {"RHPOUT", NULL, "Output Mixer"}, + {"LHPOUT", NULL, "Output Mixer"}, + {"LOUT", NULL, "Output Mixer"}, + {"ROUT", NULL, "Output Mixer"}, + + /* Inputs */ + {"Line Input", "NULL", "LLINEIN"}, + {"Line Input", "NULL", "RLINEIN"}, + + {"Mic Input", "NULL", "MICIN"}, + + /* input mux */ + {"Capture Source", "Line", "Line Input"}, + {"Capture Source", "Mic", "Mic Input"}, + {"ADC", NULL, "Capture Source"}, + +}; + +/* tlv320aic23 related */ +static const struct tlv320aic23_srate_reg_info srate_reg_info[] = { + {4000, 0x06, 1}, /* 4000 */ + {8000, 0x06, 0}, /* 8000 */ + {16000, 0x0C, 1}, /* 16000 */ + {22050, 0x11, 1}, /* 22050 */ + {24000, 0x00, 1}, /* 24000 */ + {32000, 0x0C, 0}, /* 32000 */ + {44100, 0x11, 0}, /* 44100 */ + {48000, 0x00, 0}, /* 48000 */ + {88200, 0x1F, 0}, /* 88200 */ + {96000, 0x0E, 0}, /* 96000 */ +}; + +static int tlv320aic23_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets, + ARRAY_SIZE(tlv320aic23_dapm_widgets)); + + /* set up audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static int tlv320aic23_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 iface_reg, data; + u8 count = 0; + + iface_reg = + tlv320aic23_read_reg_cache(codec, + TLV320AIC23_DIGT_FMT) & ~(0x03 << 2); + + /* Search for the right sample rate */ + /* Verify what happens if the rate is not supported + * now it goes to 96Khz */ + while ((srate_reg_info[count].sample_rate != params_rate(params)) && + (count < ARRAY_SIZE(srate_reg_info))) { + count++; + } + + data = (srate_reg_info[count].divider << TLV320AIC23_CLKIN_SHIFT) | + (srate_reg_info[count]. control << TLV320AIC23_BOSR_SHIFT) | + TLV320AIC23_USB_CLK_ON; + + tlv320aic23_write(codec, TLV320AIC23_SRATE, data); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface_reg |= (0x01 << 2); + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface_reg |= (0x02 << 2); + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface_reg |= (0x03 << 2); + break; + } + tlv320aic23_write(codec, TLV320AIC23_DIGT_FMT, iface_reg); + + return 0; +} + +static int tlv320aic23_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + + /* set active */ + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0001); + + return 0; +} + +static void tlv320aic23_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + + /* deactivate */ + if (!codec->active) { + udelay(50); + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0); + } +} + +static int tlv320aic23_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 reg; + + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_DIGT); + if (mute) + reg |= TLV320AIC23_DACM_MUTE; + + else + reg &= ~TLV320AIC23_DACM_MUTE; + + tlv320aic23_write(codec, TLV320AIC23_DIGT, reg); + + return 0; +} + +static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface_reg; + + iface_reg = + tlv320aic23_read_reg_cache(codec, TLV320AIC23_DIGT_FMT) & (~0x03); + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface_reg |= TLV320AIC23_MS_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface_reg |= TLV320AIC23_FOR_I2S; + break; + case SND_SOC_DAIFMT_DSP_A: + iface_reg |= TLV320AIC23_FOR_DSP; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface_reg |= TLV320AIC23_FOR_LJUST; + break; + default: + return -EINVAL; + + } + + tlv320aic23_write(codec, TLV320AIC23_DIGT_FMT, iface_reg); + + return 0; +} + +static int tlv320aic23_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + + switch (freq) { + case 12000000: + return 0; + } + return -EINVAL; +} + +static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_PWR) & 0xff7f; + + switch (level) { + case SND_SOC_BIAS_ON: + /* vref/mid, osc on, dac unmute */ + tlv320aic23_write(codec, TLV320AIC23_PWR, reg); + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + /* everything off except vref/vmid, */ + tlv320aic23_write(codec, TLV320AIC23_PWR, reg | 0x0040); + break; + case SND_SOC_BIAS_OFF: + /* everything off, dac mute, inactive */ + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0); + tlv320aic23_write(codec, TLV320AIC23_PWR, 0xffff); + break; + } + codec->bias_level = level; + return 0; +} + +#define AIC23_RATES SNDRV_PCM_RATE_8000_96000 +#define AIC23_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai tlv320aic23_dai = { + .name = "tlv320aic23", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = AIC23_RATES, + .formats = AIC23_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = AIC23_RATES, + .formats = AIC23_FORMATS,}, + .ops = { + .prepare = tlv320aic23_pcm_prepare, + .hw_params = tlv320aic23_hw_params, + .shutdown = tlv320aic23_shutdown, + }, + .dai_ops = { + .digital_mute = tlv320aic23_mute, + .set_fmt = tlv320aic23_set_dai_fmt, + .set_sysclk = tlv320aic23_set_dai_sysclk, + } +}; +EXPORT_SYMBOL_GPL(tlv320aic23_dai); + +static int tlv320aic23_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0); + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int tlv320aic23_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + int i; + u16 reg; + + /* Sync reg_cache with the hardware */ + for (reg = 0; reg < ARRAY_SIZE(tlv320aic23_reg); i++) { + u16 val = tlv320aic23_read_reg_cache(codec, reg); + tlv320aic23_write(codec, reg, val); + } + + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + tlv320aic23_set_bias_level(codec, codec->suspend_bias_level); + + return 0; +} + +/* + * initialise the AIC23 driver + * register the mixer and dsp interfaces with the kernel + */ +static int tlv320aic23_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + u16 reg; + + codec->name = "tlv320aic23"; + codec->owner = THIS_MODULE; + codec->read = tlv320aic23_read_reg_cache; + codec->write = tlv320aic23_write; + codec->set_bias_level = tlv320aic23_set_bias_level; + codec->dai = &tlv320aic23_dai; + codec->num_dai = 1; + codec->reg_cache_size = ARRAY_SIZE(tlv320aic23_reg); + codec->reg_cache = + kmemdup(tlv320aic23_reg, sizeof(tlv320aic23_reg), GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + + /* Reset codec */ + tlv320aic23_write(codec, TLV320AIC23_RESET, 0); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "tlv320aic23: failed to create pcms\n"); + goto pcm_err; + } + + /* power on device */ + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + tlv320aic23_write(codec, TLV320AIC23_DIGT, TLV320AIC23_DEEMP_44K); + + /* Unmute input */ + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_LINVOL); + tlv320aic23_write(codec, TLV320AIC23_LINVOL, + (reg & (~TLV320AIC23_LIM_MUTED)) | + (TLV320AIC23_LRS_ENABLED)); + + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_RINVOL); + tlv320aic23_write(codec, TLV320AIC23_RINVOL, + (reg & (~TLV320AIC23_LIM_MUTED)) | + TLV320AIC23_LRS_ENABLED); + + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_ANLG); + tlv320aic23_write(codec, TLV320AIC23_ANLG, + (reg) & (~TLV320AIC23_BYPASS_ON) & + (~TLV320AIC23_MICM_MUTED)); + + /* Default output volume */ + tlv320aic23_write(codec, TLV320AIC23_LCHNVOL, + TLV320AIC23_DEFAULT_OUT_VOL & + TLV320AIC23_OUT_VOL_MASK); + tlv320aic23_write(codec, TLV320AIC23_RCHNVOL, + TLV320AIC23_DEFAULT_OUT_VOL & + TLV320AIC23_OUT_VOL_MASK); + + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x1); + + tlv320aic23_add_controls(codec); + tlv320aic23_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "tlv320aic23: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} +static struct snd_soc_device *tlv320aic23_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +/* + * If the i2c layer weren't so broken, we could pass this kind of data + * around + */ +static int tlv320aic23_codec_probe(struct i2c_client *i2c, + const struct i2c_device_id *i2c_id) +{ + struct snd_soc_device *socdev = tlv320aic23_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EINVAL; + + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = tlv320aic23_init(socdev); + if (ret < 0) { + printk(KERN_ERR "tlv320aic23: failed to initialise AIC23\n"); + goto err; + } + return ret; + +err: + kfree(codec); + kfree(i2c); + return ret; +} +static int __exit tlv320aic23_i2c_remove(struct i2c_client *i2c) +{ + put_device(&i2c->dev); + return 0; +} + +static const struct i2c_device_id tlv320aic23_id[] = { + {"tlv320aic23", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tlv320aic23_id); + +static struct i2c_driver tlv320aic23_i2c_driver = { + .driver = { + .name = "tlv320aic23", + }, + .probe = tlv320aic23_codec_probe, + .remove = __exit_p(tlv320aic23_i2c_remove), + .id_table = tlv320aic23_id, +}; + +#endif + +static int tlv320aic23_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + printk(KERN_INFO "AIC23 Audio Codec %s\n", AIC23_VERSION); + + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + tlv320aic23_socdev = socdev; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + codec->hw_write = (hw_write_t) i2c_smbus_write_byte_data; + codec->hw_read = NULL; + ret = i2c_add_driver(&tlv320aic23_i2c_driver); + if (ret != 0) + printk(KERN_ERR "can't add i2c driver"); +#endif + return ret; +} + +static int tlv320aic23_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&tlv320aic23_i2c_driver); +#endif + kfree(codec->reg_cache); + kfree(codec); + + return 0; +} +struct snd_soc_codec_device soc_codec_dev_tlv320aic23 = { + .probe = tlv320aic23_probe, + .remove = tlv320aic23_remove, + .suspend = tlv320aic23_suspend, + .resume = tlv320aic23_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_tlv320aic23); + +MODULE_DESCRIPTION("ASoC TLV320AIC23 codec driver"); +MODULE_AUTHOR("Arun KS <arunks(a)mistralsolutions.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tlv320aic23.h b/sound/soc/codecs/tlv320aic23.h new file mode 100644 index 0000000..79d1faf --- /dev/null +++ b/sound/soc/codecs/tlv320aic23.h @@ -0,0 +1,122 @@ +/* + * ALSA SoC TLV320AIC23 codec driver + * + * Author: Arun KS, <arunks(a)mistralsolutions.com> + * Copyright: (C) 2008 Mistral Solutions Pvt Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _TLV320AIC23_H +#define _TLV320AIC23_H + +/* Codec TLV320AIC23 */ +#define TLV320AIC23_LINVOL 0x00 +#define TLV320AIC23_RINVOL 0x01 +#define TLV320AIC23_LCHNVOL 0x02 +#define TLV320AIC23_RCHNVOL 0x03 +#define TLV320AIC23_ANLG 0x04 +#define TLV320AIC23_DIGT 0x05 +#define TLV320AIC23_PWR 0x06 +#define TLV320AIC23_DIGT_FMT 0x07 +#define TLV320AIC23_SRATE 0x08 +#define TLV320AIC23_ACTIVE 0x09 +#define TLV320AIC23_RESET 0x0F + +/* Left (right) line input volume control register */ +#define TLV320AIC23_LRS_ENABLED 0x0100 +#define TLV320AIC23_LIM_MUTED 0x0080 +#define TLV320AIC23_LIV_DEFAULT 0x0017 +#define TLV320AIC23_LIV_MAX 0x001f +#define TLV320AIC23_LIV_MIN 0x0000 + +/* Left (right) channel headphone volume control register */ +#define TLV320AIC23_LZC_ON 0x0080 +#define TLV320AIC23_LHV_DEFAULT 0x0079 +#define TLV320AIC23_LHV_MAX 0x007f +#define TLV320AIC23_LHV_MIN 0x0000 + +/* Analog audio path control register */ +#define TLV320AIC23_STA_REG(x) ((x)<<6) +#define TLV320AIC23_STE_ENABLED 0x0020 +#define TLV320AIC23_DAC_SELECTED 0x0010 +#define TLV320AIC23_BYPASS_ON 0x0008 +#define TLV320AIC23_INSEL_MIC 0x0004 +#define TLV320AIC23_MICM_MUTED 0x0002 +#define TLV320AIC23_MICB_20DB 0x0001 + +/* Digital audio path control register */ +#define TLV320AIC23_DACM_MUTE 0x0008 +#define TLV320AIC23_DEEMP_32K 0x0002 +#define TLV320AIC23_DEEMP_44K 0x0004 +#define TLV320AIC23_DEEMP_48K 0x0006 +#define TLV320AIC23_ADCHP_ON 0x0001 + +/* Power control down register */ +#define TLV320AIC23_DEVICE_PWR_OFF 0x0080 +#define TLV320AIC23_CLK_OFF 0x0040 +#define TLV320AIC23_OSC_OFF 0x0020 +#define TLV320AIC23_OUT_OFF 0x0010 +#define TLV320AIC23_DAC_OFF 0x0008 +#define TLV320AIC23_ADC_OFF 0x0004 +#define TLV320AIC23_MIC_OFF 0x0002 +#define TLV320AIC23_LINE_OFF 0x0001 + +/* Digital audio interface register */ +#define TLV320AIC23_MS_MASTER 0x0040 +#define TLV320AIC23_LRSWAP_ON 0x0020 +#define TLV320AIC23_LRP_ON 0x0010 +#define TLV320AIC23_IWL_16 0x0000 +#define TLV320AIC23_IWL_20 0x0004 +#define TLV320AIC23_IWL_24 0x0008 +#define TLV320AIC23_IWL_32 0x000C +#define TLV320AIC23_FOR_I2S 0x0002 +#define TLV320AIC23_FOR_DSP 0x0003 +#define TLV320AIC23_FOR_LJUST 0x0001 + +/* Sample rate control register */ +#define TLV320AIC23_CLKOUT_HALF 0x0080 +#define TLV320AIC23_CLKIN_HALF 0x0040 +#define TLV320AIC23_BOSR_384fs 0x0002 /* BOSR_272fs in USB mode */ +#define TLV320AIC23_USB_CLK_ON 0x0001 +#define TLV320AIC23_SR_MASK 0xf +#define TLV320AIC23_CLKOUT_SHIFT 7 +#define TLV320AIC23_CLKIN_SHIFT 6 +#define TLV320AIC23_SR_SHIFT 2 +#define TLV320AIC23_BOSR_SHIFT 1 + +/* Digital interface register */ +#define TLV320AIC23_ACT_ON 0x0001 + +/* + * AUDIO related MACROS + */ + +#define TLV320AIC23_DEFAULT_OUT_VOL 0x70 +#define TLV320AIC23_DEFAULT_IN_VOLUME 0x10 + +#define TLV320AIC23_OUT_VOL_MIN TLV320AIC23_LHV_MIN +#define TLV320AIC23_OUT_VOL_MAX TLV320AIC23_LHV_MAX +#define TLV320AIC23_OUT_VO_RANGE (TLV320AIC23_OUT_VOL_MAX - \ + TLV320AIC23_OUT_VOL_MIN) +#define TLV320AIC23_OUT_VOL_MASK TLV320AIC23_OUT_VOL_MAX + +#define TLV320AIC23_IN_VOL_MIN TLV320AIC23_LIV_MIN +#define TLV320AIC23_IN_VOL_MAX TLV320AIC23_LIV_MAX +#define TLV320AIC23_IN_VOL_RANGE (TLV320AIC23_IN_VOL_MAX - \ + TLV320AIC23_IN_VOL_MIN) +#define TLV320AIC23_IN_VOL_MASK TLV320AIC23_IN_VOL_MAX + +#define TLV320AIC23_SIDETONE_MASK 0x1c0 +#define TLV320AIC23_SIDETONE_0 0x100 +#define TLV320AIC23_SIDETONE_6 0x000 +#define TLV320AIC23_SIDETONE_9 0x040 +#define TLV320AIC23_SIDETONE_12 0x080 +#define TLV320AIC23_SIDETONE_18 0x0c0 + +extern struct snd_soc_dai tlv320aic23_dai; +extern struct snd_soc_codec_device soc_codec_dev_tlv320aic23; + +#endif /* _TLV320AIC23_H */ -- 1.5.3.4

3 2

[alsa-devel] snd_hda_intel shutdown noise
by Howard Chu 03 Oct '08

03 Oct '08

On my HP dv5z whenever shutting down or rebooting there's a loud pop on the speakers just before the screen shuts off. It seems to me that it might be worthwhile to zero the volume or set the mute bit on the output channels just before closing the device. I started looking into this but haven't found the right place to insert the code yet. Anyone else have any ideas? Will this even make a difference? -- -- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/

2 1

[alsa-devel] ASoC updates
by Mark Brown 02 Oct '08

02 Oct '08

The following changes since commit 2e2ed79f64e935540b0d148f7e2c3ebefafe133e: Vladimir Barinov (1): ALSA: Correct Vladimir Barinov's e-mail address are available in the git repository at: git://opensource.wolfsonmicro.com/linux-2.6-asoc for-tiwai Of these only the patch from Rob is 2.6.27 material. Arun KS (1): ASoC: Add destination and source port for DMA on OMAP1 Frank Mandarino (1): ASoC: Remove references to Endrelia ETI-B1 board Jonas Bonn (2): ASoC: Add widgets before setting endpoints on GTA01 ASoC: Drop device registration from GTA01 lm4857 driver Rob Sims (1): ASoC: Set correct name for WM8753 rec mixer output sound/soc/at91/Kconfig | 17 -- sound/soc/at91/Makefile | 5 - sound/soc/at91/eti_b1_wm8731.c | 349 ------------------------------------ sound/soc/codecs/wm8753.c | 4 +- sound/soc/omap/omap-pcm.c | 4 +- sound/soc/s3c24xx/neo1973_wm8753.c | 57 +----- 6 files changed, 14 insertions(+), 422 deletions(-) delete mode 100644 sound/soc/at91/eti_b1_wm8731.c

2 6

[alsa-devel] [PATCH 1/5 v2] ASoC Add TLV320AIC23 codec driver
by Arun KS 02 Oct '08

02 Oct '08

ASoC codec driver for TLV320AIC23 device Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tlv320aic23.c | 670 ++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic23.h | 122 ++++++++ 4 files changed, 799 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/tlv320aic23.c create mode 100644 sound/soc/codecs/tlv320aic23.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0507fcf..bdead2d 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -7,6 +7,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_AK4535 select SND_SOC_CS4270 select SND_SOC_SSM2602 + select SND_SOC_TLV320AIC23 select SND_SOC_TLV320AIC26 select SND_SOC_TLV320AIC3X select SND_SOC_UDA1380 @@ -62,6 +63,10 @@ config SND_SOC_CS4270_VD33_ERRATA config SND_SOC_SSM2602 tristate +config SND_SOC_TLV320AIC23 + tristate + depends on I2C + config SND_SOC_TLV320AIC26 tristate "TI TLV320AIC26 Codec support" depends on SND_SOC && SPI diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 0731844..90f0a58 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -4,6 +4,7 @@ snd-soc-ad73311-objs := ad73311.o snd-soc-ak4535-objs := ak4535.o snd-soc-cs4270-objs := cs4270.o snd-soc-ssm2602-objs := ssm2602.o +snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic26-objs := tlv320aic26.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o snd-soc-uda1380-objs := uda1380.o @@ -25,6 +26,7 @@ obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o +obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c new file mode 100644 index 0000000..c2d35e9 --- /dev/null +++ b/sound/soc/codecs/tlv320aic23.c @@ -0,0 +1,670 @@ +/* + * ALSA SoC TLV320AIC23 codec driver + * + * Author: Arun KS, <arunks(a)mistralsolutions.com> + * Copyright: (C) 2008 Mistral Solutions Pvt Ltd., + * + * Based on sound/soc/codecs/wm8731.c by Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Notes: + * The AIC23 is a driver for a low power stereo audio + * codec tlv320aic23 + * + * The machine layer should disable unsupported inputs/outputs by + * snd_soc_dapm_disable_pin(codec, "LHPOUT"), etc. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> + +#include "tlv320aic23.h" + +#define AUDIO_NAME "tlv320aic23" +#define AIC23_VERSION "0.1" + +struct tlv320aic23_srate_reg_info { + u32 sample_rate; + u8 control; /* SR3, SR2, SR1, SR0 and BOSR */ + u8 divider; /* if 0 CLKIN = MCLK, if 1 CLKIN = MCLK/2 */ +}; + +/* + * AIC23 register cache + */ +static const u16 tlv320aic23_reg[] = { + 0x0097, 0x0097, 0x00F9, 0x00F9, /* 0 */ + 0x001A, 0x0004, 0x0007, 0x0001, /* 4 */ + 0x0020, 0x0000, 0x0000, 0x0000, /* 8 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 12 */ +}; + +/* + * read tlv320aic23 register cache + */ +static inline unsigned int tlv320aic23_read_reg_cache(struct snd_soc_codec + *codec, unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg >= ARRAY_SIZE(tlv320aic23_reg)) + return -1; + return cache[reg]; +} + +/* + * write tlv320aic23 register cache + */ +static inline void tlv320aic23_write_reg_cache(struct snd_soc_codec *codec, + u8 reg, u16 value) +{ + u16 *cache = codec->reg_cache; + if (reg >= ARRAY_SIZE(tlv320aic23_reg)) + return; + cache[reg] = value; +} + +/* + * write to the tlv320aic23 register space + */ +static int tlv320aic23_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + + u8 data; + + /* TLV320AIC23 has 7 bit address and 9 bits of data + * so we need to switch one data bit into reg and rest + * of data into val + */ + + if ((reg < 0 || reg > 9) && (reg != 15)) { + printk(KERN_WARNING "%s Invalid register R%d\n", __func__, reg); + return -1; + } + + data = (reg << 1) | (value >> 8 & 0x01); + + tlv320aic23_write_reg_cache(codec, reg, value); + + if (codec->hw_write(codec->control_data, data, + (value & 0xff)) == 0) + return 0; + + printk(KERN_ERR "%s cannot write %03x to register R%d\n", __func__, + value, reg); + + return -EIO; +} + +static const char *rec_src_text[] = { "Line", "Mic" }; +static const char *deemph_text[] = {"None", "32Khz", "44.1Khz", "48Khz"}; +static const char *sidetone_text[] = {"-6db", "-9db", "-12db", "-18db", "0db"}; + +static const struct soc_enum rec_src_enum = + SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 2, 2, rec_src_text); + +static const struct snd_kcontrol_new tlv320aic23_rec_src_mux_controls = +SOC_DAPM_ENUM("Input Select", rec_src_enum); + +static const struct soc_enum tlv320aic23_rec_src = + SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 2, 2, rec_src_text); +static const struct soc_enum tlv320aic23_deemph = + SOC_ENUM_SINGLE(TLV320AIC23_DIGT, 1, 4, deemph_text); +static const struct soc_enum tlv320aic23_sidetone = + SOC_ENUM_SINGLE(TLV320AIC23_ANLG, 6, 5, sidetone_text); + +static const DECLARE_TLV_DB_SCALE(out_gain_tlv, -12100, 100, 0); +static const DECLARE_TLV_DB_SCALE(input_gain_tlv, -1725, 75, 0); + +static const struct snd_kcontrol_new tlv320aic23_snd_controls[] = { + SOC_DOUBLE_R_TLV("Digital Playback Volume", TLV320AIC23_LCHNVOL, + TLV320AIC23_RCHNVOL, 0, 127, 0, out_gain_tlv), + SOC_SINGLE("Digital Playback Switch", TLV320AIC23_DIGT, 3, 1, 1), + SOC_DOUBLE_R("Line Input Switch", TLV320AIC23_LINVOL, + TLV320AIC23_RINVOL, 7, 1, 0), + SOC_DOUBLE_R_TLV("Line Input Volume", TLV320AIC23_LINVOL, + TLV320AIC23_RINVOL, 0, 31, 0, input_gain_tlv), + SOC_SINGLE("Mic Input Switch", TLV320AIC23_ANLG, 1, 1, 1), + SOC_SINGLE("Mic Booster Switch", TLV320AIC23_ANLG, 0, 1, 0), + SOC_ENUM("Sidetone Gain", tlv320aic23_sidetone), + SOC_ENUM("Playback De-emphasis", tlv320aic23_deemph), +}; + +/* add non dapm controls */ +static int tlv320aic23_add_controls(struct snd_soc_codec *codec) +{ + + int err, i; + + for (i = 0; i < ARRAY_SIZE(tlv320aic23_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&tlv320aic23_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + + return 0; + +} + +/* PGA Mixer controls for Line and Mic switch */ +static const struct snd_kcontrol_new tlv320aic23_output_mixer_controls[] = { + SOC_DAPM_SINGLE("Line Bypass Switch", TLV320AIC23_ANLG, 3, 1, 0), + SOC_DAPM_SINGLE("Mic Sidetone Switch", TLV320AIC23_ANLG, 5, 1, 0), + SOC_DAPM_SINGLE("Playback Switch", TLV320AIC23_ANLG, 4, 1, 0), +}; + +static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = { + SND_SOC_DAPM_DAC("DAC", "Playback", TLV320AIC23_PWR, 3, 1), + SND_SOC_DAPM_ADC("ADC", "Capture", TLV320AIC23_PWR, 2, 1), + SND_SOC_DAPM_MUX("Capture Source", SND_SOC_NOPM, 0, 0, + &tlv320aic23_rec_src_mux_controls), + SND_SOC_DAPM_MIXER("Output Mixer", TLV320AIC23_PWR, 4, 1, + &tlv320aic23_output_mixer_controls[0], + ARRAY_SIZE(tlv320aic23_output_mixer_controls)), + SND_SOC_DAPM_PGA("Line Input", TLV320AIC23_PWR, 0, 1, NULL, 0), + SND_SOC_DAPM_PGA("Mic Input", TLV320AIC23_PWR, 1, 1, NULL, 0), + + SND_SOC_DAPM_OUTPUT("LHPOUT"), + SND_SOC_DAPM_OUTPUT("RHPOUT"), + SND_SOC_DAPM_OUTPUT("LOUT"), + SND_SOC_DAPM_OUTPUT("ROUT"), + + SND_SOC_DAPM_INPUT("LLINEIN"), + SND_SOC_DAPM_INPUT("RLINEIN"), + + SND_SOC_DAPM_INPUT("MICIN"), +}; + +static const struct snd_soc_dapm_route intercon[] = { + /* Output Mixer */ + {"Output Mixer", "Line Bypass Switch", "Line Input"}, + {"Output Mixer", "Playback Switch", "DAC"}, + {"Output Mixer", "Mic Sidetone Switch", "Mic Input"}, + + /* Outputs */ + {"RHPOUT", NULL, "Output Mixer"}, + {"LHPOUT", NULL, "Output Mixer"}, + {"LOUT", NULL, "Output Mixer"}, + {"ROUT", NULL, "Output Mixer"}, + + /* Inputs */ + {"Line Input", "NULL", "LLINEIN"}, + {"Line Input", "NULL", "RLINEIN"}, + + {"Mic Input", "NULL", "MICIN"}, + + /* input mux */ + {"Capture Source", "Line", "Line Input"}, + {"Capture Source", "Mic", "Mic Input"}, + {"ADC", NULL, "Capture Source"}, + +}; + +/* tlv320aic23 related */ +static const struct tlv320aic23_srate_reg_info srate_reg_info[] = { + {4000, 0x06, 1}, /* 4000 */ + {8000, 0x06, 0}, /* 8000 */ + {16000, 0x0C, 1}, /* 16000 */ + {22050, 0x11, 1}, /* 22050 */ + {24000, 0x00, 1}, /* 24000 */ + {32000, 0x0C, 0}, /* 32000 */ + {44100, 0x11, 0}, /* 44100 */ + {48000, 0x00, 0}, /* 48000 */ + {88200, 0x1F, 0}, /* 88200 */ + {96000, 0x0E, 0}, /* 96000 */ +}; + +static int tlv320aic23_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets, + ARRAY_SIZE(tlv320aic23_dapm_widgets)); + + /* set up audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static int tlv320aic23_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 iface_reg, data; + u8 count = 0; + + iface_reg = + tlv320aic23_read_reg_cache(codec, + TLV320AIC23_DIGT_FMT) & ~(0x03 << 2); + + /* Search for the right sample rate */ + /* Verify what happens if the rate is not supported + * now it goes to 96Khz */ + while ((srate_reg_info[count].sample_rate != params_rate(params)) && + (count < ARRAY_SIZE(srate_reg_info))) { + count++; + } + + data = (srate_reg_info[count].divider << TLV320AIC23_CLKIN_SHIFT) | + (srate_reg_info[count]. control << TLV320AIC23_BOSR_SHIFT) | + TLV320AIC23_USB_CLK_ON; + + tlv320aic23_write(codec, TLV320AIC23_SRATE, data); + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface_reg |= (0x01 << 2); + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface_reg |= (0x02 << 2); + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface_reg |= (0x03 << 2); + break; + } + tlv320aic23_write(codec, TLV320AIC23_DIGT_FMT, iface_reg); + + return 0; +} + +static int tlv320aic23_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + + /* set active */ + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0001); + + return 0; +} + +static void tlv320aic23_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + + /* deactivate */ + if (!codec->active) { + udelay(50); + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0); + } +} + +static int tlv320aic23_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 reg; + + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_DIGT); + if (mute) + reg |= TLV320AIC23_DACM_MUTE; + + else + reg &= ~TLV320AIC23_DACM_MUTE; + + tlv320aic23_write(codec, TLV320AIC23_DIGT, reg); + + return 0; +} + +static int tlv320aic23_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface_reg; + + iface_reg = + tlv320aic23_read_reg_cache(codec, TLV320AIC23_DIGT_FMT) & (~0x03); + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface_reg |= TLV320AIC23_MS_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface_reg |= TLV320AIC23_FOR_I2S; + break; + case SND_SOC_DAIFMT_DSP_A: + iface_reg |= TLV320AIC23_FOR_DSP; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface_reg |= TLV320AIC23_FOR_LJUST; + break; + default: + return -EINVAL; + + } + + tlv320aic23_write(codec, TLV320AIC23_DIGT_FMT, iface_reg); + + return 0; +} + +static int tlv320aic23_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + + switch (freq) { + case 12000000: + return 0; + } + return -EINVAL; +} + +static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_PWR) & 0xff7f; + + switch (level) { + case SND_SOC_BIAS_ON: + /* vref/mid, osc on, dac unmute */ + tlv320aic23_write(codec, TLV320AIC23_PWR, reg); + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + /* everything off except vref/vmid, */ + tlv320aic23_write(codec, TLV320AIC23_PWR, reg | 0x0040); + break; + case SND_SOC_BIAS_OFF: + /* everything off, dac mute, inactive */ + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0); + tlv320aic23_write(codec, TLV320AIC23_PWR, 0xffff); + break; + } + codec->bias_level = level; + return 0; +} + +#define AIC23_RATES SNDRV_PCM_RATE_8000_96000 +#define AIC23_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai tlv320aic23_dai = { + .name = "tlv320aic23", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = AIC23_RATES, + .formats = AIC23_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = AIC23_RATES, + .formats = AIC23_FORMATS,}, + .ops = { + .prepare = tlv320aic23_pcm_prepare, + .hw_params = tlv320aic23_hw_params, + .shutdown = tlv320aic23_shutdown, + }, + .dai_ops = { + .digital_mute = tlv320aic23_mute, + .set_fmt = tlv320aic23_set_dai_fmt, + .set_sysclk = tlv320aic23_set_dai_sysclk, + } +}; +EXPORT_SYMBOL_GPL(tlv320aic23_dai); + +static int tlv320aic23_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0); + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int tlv320aic23_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + int i; + u16 reg; + + /* Sync reg_cache with the hardware */ + for (reg = 0; reg < ARRAY_SIZE(tlv320aic23_reg); i++) { + u16 val = tlv320aic23_read_reg_cache(codec, reg); + tlv320aic23_write(codec, reg, val); + } + + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + tlv320aic23_set_bias_level(codec, codec->suspend_bias_level); + + return 0; +} + +/* + * initialise the AIC23 driver + * register the mixer and dsp interfaces with the kernel + */ +static int tlv320aic23_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + u16 reg; + + codec->name = "tlv320aic23"; + codec->owner = THIS_MODULE; + codec->read = tlv320aic23_read_reg_cache; + codec->write = tlv320aic23_write; + codec->set_bias_level = tlv320aic23_set_bias_level; + codec->dai = &tlv320aic23_dai; + codec->num_dai = 1; + codec->reg_cache_size = ARRAY_SIZE(tlv320aic23_reg); + codec->reg_cache = + kmemdup(tlv320aic23_reg, sizeof(tlv320aic23_reg), GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + + /* Reset codec */ + tlv320aic23_write(codec, TLV320AIC23_RESET, 0); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "tlv320aic23: failed to create pcms\n"); + goto pcm_err; + } + + /* power on device */ + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + tlv320aic23_write(codec, TLV320AIC23_DIGT, TLV320AIC23_DEEMP_44K); + + /* Unmute input */ + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_LINVOL); + tlv320aic23_write(codec, TLV320AIC23_LINVOL, + (reg & (~TLV320AIC23_LIM_MUTED)) | + (TLV320AIC23_LRS_ENABLED)); + + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_RINVOL); + tlv320aic23_write(codec, TLV320AIC23_RINVOL, + (reg & (~TLV320AIC23_LIM_MUTED)) | + TLV320AIC23_LRS_ENABLED); + + reg = tlv320aic23_read_reg_cache(codec, TLV320AIC23_ANLG); + tlv320aic23_write(codec, TLV320AIC23_ANLG, + (reg) & (~TLV320AIC23_BYPASS_ON) & + (~TLV320AIC23_MICM_MUTED)); + + /* Default output volume */ + tlv320aic23_write(codec, TLV320AIC23_LCHNVOL, + TLV320AIC23_DEFAULT_OUT_VOL & + TLV320AIC23_OUT_VOL_MASK); + tlv320aic23_write(codec, TLV320AIC23_RCHNVOL, + TLV320AIC23_DEFAULT_OUT_VOL & + TLV320AIC23_OUT_VOL_MASK); + + tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x1); + + tlv320aic23_add_controls(codec); + tlv320aic23_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "tlv320aic23: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} +static struct snd_soc_device *tlv320aic23_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +/* + * If the i2c layer weren't so broken, we could pass this kind of data + * around + */ +static int tlv320aic23_codec_probe(struct i2c_client *i2c, + const struct i2c_device_id *i2c_id) +{ + struct snd_soc_device *socdev = tlv320aic23_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EINVAL; + + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = tlv320aic23_init(socdev); + if (ret < 0) { + printk(KERN_ERR "tlv320aic23: failed to initialise AIC23\n"); + goto err; + } + return ret; + +err: + kfree(codec); + kfree(i2c); + return ret; +} +static int __exit tlv320aic23_i2c_remove(struct i2c_client *i2c) +{ + put_device(&i2c->dev); + return 0; +} + +static const struct i2c_device_id tlv320aic23_id[] = { + {"tlv320aic23", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tlv320aic23_id); + +static struct i2c_driver tlv320aic23_i2c_driver = { + .driver = { + .name = "tlv320aic23", + }, + .probe = tlv320aic23_codec_probe, + .remove = __exit_p(tlv320aic23_i2c_remove), + .id_table = tlv320aic23_id, +}; + +#endif + +static int tlv320aic23_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + printk(KERN_INFO "AIC23 Audio Codec %s\n", AIC23_VERSION); + + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + tlv320aic23_socdev = socdev; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + codec->hw_write = (hw_write_t) i2c_smbus_write_byte_data; + codec->hw_read = NULL; + ret = i2c_add_driver(&tlv320aic23_i2c_driver); + if (ret != 0) + printk(KERN_ERR "can't add i2c driver"); +#endif + return ret; +} + +static int tlv320aic23_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&tlv320aic23_i2c_driver); +#endif + kfree(codec->reg_cache); + kfree(codec); + + return 0; +} +struct snd_soc_codec_device soc_codec_dev_tlv320aic23 = { + .probe = tlv320aic23_probe, + .remove = tlv320aic23_remove, + .suspend = tlv320aic23_suspend, + .resume = tlv320aic23_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_tlv320aic23); + +MODULE_DESCRIPTION("ASoC TLV320AIC23 codec driver"); +MODULE_AUTHOR("Arun KS <arunks(a)mistralsolutions.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tlv320aic23.h b/sound/soc/codecs/tlv320aic23.h new file mode 100644 index 0000000..79d1faf --- /dev/null +++ b/sound/soc/codecs/tlv320aic23.h @@ -0,0 +1,122 @@ +/* + * ALSA SoC TLV320AIC23 codec driver + * + * Author: Arun KS, <arunks(a)mistralsolutions.com> + * Copyright: (C) 2008 Mistral Solutions Pvt Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _TLV320AIC23_H +#define _TLV320AIC23_H + +/* Codec TLV320AIC23 */ +#define TLV320AIC23_LINVOL 0x00 +#define TLV320AIC23_RINVOL 0x01 +#define TLV320AIC23_LCHNVOL 0x02 +#define TLV320AIC23_RCHNVOL 0x03 +#define TLV320AIC23_ANLG 0x04 +#define TLV320AIC23_DIGT 0x05 +#define TLV320AIC23_PWR 0x06 +#define TLV320AIC23_DIGT_FMT 0x07 +#define TLV320AIC23_SRATE 0x08 +#define TLV320AIC23_ACTIVE 0x09 +#define TLV320AIC23_RESET 0x0F + +/* Left (right) line input volume control register */ +#define TLV320AIC23_LRS_ENABLED 0x0100 +#define TLV320AIC23_LIM_MUTED 0x0080 +#define TLV320AIC23_LIV_DEFAULT 0x0017 +#define TLV320AIC23_LIV_MAX 0x001f +#define TLV320AIC23_LIV_MIN 0x0000 + +/* Left (right) channel headphone volume control register */ +#define TLV320AIC23_LZC_ON 0x0080 +#define TLV320AIC23_LHV_DEFAULT 0x0079 +#define TLV320AIC23_LHV_MAX 0x007f +#define TLV320AIC23_LHV_MIN 0x0000 + +/* Analog audio path control register */ +#define TLV320AIC23_STA_REG(x) ((x)<<6) +#define TLV320AIC23_STE_ENABLED 0x0020 +#define TLV320AIC23_DAC_SELECTED 0x0010 +#define TLV320AIC23_BYPASS_ON 0x0008 +#define TLV320AIC23_INSEL_MIC 0x0004 +#define TLV320AIC23_MICM_MUTED 0x0002 +#define TLV320AIC23_MICB_20DB 0x0001 + +/* Digital audio path control register */ +#define TLV320AIC23_DACM_MUTE 0x0008 +#define TLV320AIC23_DEEMP_32K 0x0002 +#define TLV320AIC23_DEEMP_44K 0x0004 +#define TLV320AIC23_DEEMP_48K 0x0006 +#define TLV320AIC23_ADCHP_ON 0x0001 + +/* Power control down register */ +#define TLV320AIC23_DEVICE_PWR_OFF 0x0080 +#define TLV320AIC23_CLK_OFF 0x0040 +#define TLV320AIC23_OSC_OFF 0x0020 +#define TLV320AIC23_OUT_OFF 0x0010 +#define TLV320AIC23_DAC_OFF 0x0008 +#define TLV320AIC23_ADC_OFF 0x0004 +#define TLV320AIC23_MIC_OFF 0x0002 +#define TLV320AIC23_LINE_OFF 0x0001 + +/* Digital audio interface register */ +#define TLV320AIC23_MS_MASTER 0x0040 +#define TLV320AIC23_LRSWAP_ON 0x0020 +#define TLV320AIC23_LRP_ON 0x0010 +#define TLV320AIC23_IWL_16 0x0000 +#define TLV320AIC23_IWL_20 0x0004 +#define TLV320AIC23_IWL_24 0x0008 +#define TLV320AIC23_IWL_32 0x000C +#define TLV320AIC23_FOR_I2S 0x0002 +#define TLV320AIC23_FOR_DSP 0x0003 +#define TLV320AIC23_FOR_LJUST 0x0001 + +/* Sample rate control register */ +#define TLV320AIC23_CLKOUT_HALF 0x0080 +#define TLV320AIC23_CLKIN_HALF 0x0040 +#define TLV320AIC23_BOSR_384fs 0x0002 /* BOSR_272fs in USB mode */ +#define TLV320AIC23_USB_CLK_ON 0x0001 +#define TLV320AIC23_SR_MASK 0xf +#define TLV320AIC23_CLKOUT_SHIFT 7 +#define TLV320AIC23_CLKIN_SHIFT 6 +#define TLV320AIC23_SR_SHIFT 2 +#define TLV320AIC23_BOSR_SHIFT 1 + +/* Digital interface register */ +#define TLV320AIC23_ACT_ON 0x0001 + +/* + * AUDIO related MACROS + */ + +#define TLV320AIC23_DEFAULT_OUT_VOL 0x70 +#define TLV320AIC23_DEFAULT_IN_VOLUME 0x10 + +#define TLV320AIC23_OUT_VOL_MIN TLV320AIC23_LHV_MIN +#define TLV320AIC23_OUT_VOL_MAX TLV320AIC23_LHV_MAX +#define TLV320AIC23_OUT_VO_RANGE (TLV320AIC23_OUT_VOL_MAX - \ + TLV320AIC23_OUT_VOL_MIN) +#define TLV320AIC23_OUT_VOL_MASK TLV320AIC23_OUT_VOL_MAX + +#define TLV320AIC23_IN_VOL_MIN TLV320AIC23_LIV_MIN +#define TLV320AIC23_IN_VOL_MAX TLV320AIC23_LIV_MAX +#define TLV320AIC23_IN_VOL_RANGE (TLV320AIC23_IN_VOL_MAX - \ + TLV320AIC23_IN_VOL_MIN) +#define TLV320AIC23_IN_VOL_MASK TLV320AIC23_IN_VOL_MAX + +#define TLV320AIC23_SIDETONE_MASK 0x1c0 +#define TLV320AIC23_SIDETONE_0 0x100 +#define TLV320AIC23_SIDETONE_6 0x000 +#define TLV320AIC23_SIDETONE_9 0x040 +#define TLV320AIC23_SIDETONE_12 0x080 +#define TLV320AIC23_SIDETONE_18 0x0c0 + +extern struct snd_soc_dai tlv320aic23_dai; +extern struct snd_soc_codec_device soc_codec_dev_tlv320aic23; + +#endif /* _TLV320AIC23_H */ -- 1.5.3.4

2 1

[alsa-devel] [PATCH] external plugin for adding delay to channels
by Alex 02 Oct '08

02 Oct '08

This should be interesting for home theater installations, as I was personnally missing a "per channel delay configuration". Feel free to tell me what should be modified, I am not really used to proposing a patch. Thx

2 1

[alsa-devel] [PATCH 5/5 v2] ASoC Adds DSP DAI format support for platform driver
by Arun KS 02 Oct '08

02 Oct '08

Enables DSP DAI format for mcbsp in omap platform driver Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- sound/soc/omap/omap-mcbsp.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 35310e1..fb920e1 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -245,6 +245,11 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai, regs->rcr2 |= RDATDLY(1); regs->xcr2 |= XDATDLY(1); break; + case SND_SOC_DAIFMT_DSP_A: + /* 0-bit data delay */ + regs->rcr2 |= RDATDLY(0); + regs->xcr2 |= XDATDLY(0); + break; default: /* Unsupported data format */ return -EINVAL; -- 1.5.3.4

1 0

[alsa-devel] [PATCH 4/5 v2] ASOC adds destination and source port for dma
by Arun KS 02 Oct '08

02 Oct '08

Adds destination and source port for dma in platform driver as required by OMAP1 Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- sound/soc/omap/omap-pcm.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 690bfea..e9084fd 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -97,7 +97,7 @@ static int omap_pcm_hw_params(struct snd_pcm_substream *substream, prtd->dma_data = dma_data; err = omap_request_dma(dma_data->dma_req, dma_data->name, omap_pcm_dma_irq, substream, &prtd->dma_ch); - if (!cpu_is_omap1510()) { + if (!err & !cpu_is_omap1510()) { /* * Link channel with itself so DMA doesn't need any * reprogramming while looping the buffer @@ -147,12 +147,14 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) dma_params.src_or_dst_synch = OMAP_DMA_DST_SYNC; dma_params.src_start = runtime->dma_addr; dma_params.dst_start = dma_data->port_addr; + dma_params.dst_port = OMAP_DMA_PORT_MPUI; } else { dma_params.src_amode = OMAP_DMA_AMODE_CONSTANT; dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC; dma_params.src_or_dst_synch = OMAP_DMA_SRC_SYNC; dma_params.src_start = dma_data->port_addr; dma_params.dst_start = runtime->dma_addr; + dma_params.src_port = OMAP_DMA_PORT_MPUI; } /* * Set DMA transfer frame size equal to ALSA period size and frame -- 1.5.3.4

1 0

[alsa-devel] [PATCH 3/5 v2] Adds I2C board info for tlvaic23
by Arun KS 02 Oct '08

02 Oct '08

Adding I2C board info required for tlvaic23 i2c chip driver Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- arch/arm/mach-omap1/board-osk.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 3e766e4..e506aef 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -258,8 +258,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { .platform_data = &tps_board, }, + { + I2C_BOARD_INFO("tlv320aic23", 0x1B), + }, /* TODO when driver support is ready: - * - aic23 audio chip at 0x1a * - on Mistral, 24c04 eeprom at 0x50 * - optionally on Mistral, ov9640 camera sensor at 0x30 */ -- 1.5.3.4

1 0

[alsa-devel] [PATCH 2/5 v2] Adds ASOC Support for osk5912
by Arun KS 02 Oct '08

02 Oct '08

Adding ASOC machine driver for osk5912 Signed-off-by: Arun KS <arunks(a)mistralsolutions.com> --- sound/soc/omap/Kconfig | 8 ++ sound/soc/omap/Makefile | 2 + sound/soc/omap/osk5912.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 242 insertions(+), 0 deletions(-) create mode 100644 sound/soc/omap/osk5912.c diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index aea27e7..8b7766b 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -13,3 +13,11 @@ config SND_OMAP_SOC_N810 select SND_SOC_TLV320AIC3X help Say Y if you want to add support for SoC audio on Nokia N810. + +config SND_OMAP_SOC_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on SND_OMAP_SOC && MACH_OMAP_OSK + select SND_OMAP_SOC_MCBSP + select SND_SOC_TLV320AIC23 + help + Say Y if you want to add support for SoC audio on osk5912. diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index d8d8d58..e09d1f2 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -7,5 +7,7 @@ obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o # OMAP Machine Support snd-soc-n810-objs := n810.o +snd-soc-osk5912-objs := osk5912.o obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o +obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c new file mode 100644 index 0000000..0fe7337 --- /dev/null +++ b/sound/soc/omap/osk5912.c @@ -0,0 +1,232 @@ +/* + * osk5912.c -- SoC audio for OSK 5912 + * + * Copyright (C) 2008 Mistral Solutions + * + * Contact: Arun KS <arunks(a)mistralsolutions.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <linux/gpio.h> +#include <mach/mcbsp.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/tlv320aic23.h" + +#define CODEC_CLOCK 12000000 + +static struct clk *tlv320aic23_mclk; + +static int osk_startup(struct snd_pcm_substream *substream) +{ + return clk_enable(tlv320aic23_mclk); +} + +static void osk_shutdown(struct snd_pcm_substream *substream) +{ + clk_disable(tlv320aic23_mclk); +} + +static int osk_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int err; + + /* Set codec DAI configuration */ + err = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_NB_IF | + SND_SOC_DAIFMT_CBM_CFM); + if (err < 0) { + printk(KERN_ERR "can't set codec DAI configuration\n"); + return err; + } + + /* Set cpu DAI configuration */ + err = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_NB_IF | + SND_SOC_DAIFMT_CBM_CFM); + if (err < 0) { + printk(KERN_ERR "can't set cpu DAI configuration\n"); + return err; + } + + /* Set the codec system clock for DAC and ADC */ + err = + snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, SND_SOC_CLOCK_IN); + + if (err < 0) { + printk(KERN_ERR "can't set codec system clock\n"); + return err; + } + + return err; +} + +static struct snd_soc_ops osk_ops = { + .startup = osk_startup, + .hw_params = osk_hw_params, + .shutdown = osk_shutdown, +}; + +static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "LHPOUT"}, + {"Headphone Jack", NULL, "RHPOUT"}, + + {"LLINEIN", NULL, "Line In"}, + {"RLINEIN", NULL, "Line In"}, + + {"MICIN", NULL, "Mic Jack"}, +}; + +static int osk_tlv320aic23_init(struct snd_soc_codec *codec) +{ + + /* Add osk5912 specific widgets */ + snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets, + ARRAY_SIZE(tlv320aic23_dapm_widgets)); + + /* Set up osk5912 specific audio path audio_map */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Line In"); + snd_soc_dapm_enable_pin(codec, "Mic Jack"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link osk_dai = { + .name = "TLV320AIC23", + .stream_name = "AIC23", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &tlv320aic23_dai, + .init = osk_tlv320aic23_init, + .ops = &osk_ops, +}; + +/* Audio machine driver */ +static struct snd_soc_machine snd_soc_machine_osk = { + .name = "OSK5912", + .dai_link = &osk_dai, + .num_links = 1, +}; + +/* Audio subsystem */ +static struct snd_soc_device osk_snd_devdata = { + .machine = &snd_soc_machine_osk, + .platform = &omap_soc_platform, + .codec_dev = &soc_codec_dev_tlv320aic23, +}; + +static struct platform_device *osk_snd_device; + +static int __init osk_soc_init(void) +{ + int err; + u32 curRate; + struct device *dev; + + if (!(machine_is_omap_osk())) + return -ENODEV; + + osk_snd_device = platform_device_alloc("soc-audio", -1); + if (!osk_snd_device) + return -ENOMEM; + + platform_set_drvdata(osk_snd_device, &osk_snd_devdata); + osk_snd_devdata.dev = &osk_snd_device->dev; + *(unsigned int *)osk_dai.cpu_dai->private_data = 0; /* McBSP1 */ + err = platform_device_add(osk_snd_device); + if (err) + goto err1; + + dev = &osk_snd_device->dev; + + tlv320aic23_mclk = clk_get(dev, "mclk"); + if (IS_ERR(tlv320aic23_mclk)) { + printk(KERN_ERR "Could not get mclk clock\n"); + return -ENODEV; + } + + if (clk_get_usecount(tlv320aic23_mclk) > 0) { + /* MCLK is already in use */ + printk(KERN_WARNING + "MCLK in use at %d Hz. We change it to %d Hz\n", + (uint) clk_get_rate(tlv320aic23_mclk), CODEC_CLOCK); + } + + /* + * Configure 12 MHz output on MCLK. + */ + curRate = (uint) clk_get_rate(tlv320aic23_mclk); + if (curRate != CODEC_CLOCK) { + if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) { + printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n"); + err = -ECANCELED; + goto err1; + } + } + + printk(KERN_INFO "MCLK = %d [%d], usecount = %d\n", + (uint) clk_get_rate(tlv320aic23_mclk), CODEC_CLOCK, + clk_get_usecount(tlv320aic23_mclk)); + + return 0; +err1: + clk_put(tlv320aic23_mclk); + platform_device_del(osk_snd_device); + platform_device_put(osk_snd_device); + + return err; + +} + +static void __exit osk_soc_exit(void) +{ + platform_device_unregister(osk_snd_device); +} + +module_init(osk_soc_init); +module_exit(osk_soc_exit); + +MODULE_AUTHOR("Arun KS <arunks(a)mistralsolutions.com>"); +MODULE_DESCRIPTION("ALSA SoC OSK 5912"); +MODULE_LICENSE("GPL"); -- 1.5.3.4

1 0

[alsa-devel] How to start with a driver for custom hardware?
by javier.martinc＠alumnos.unican.es 02 Oct '08

02 Oct '08

I am trying to develop an ALSA compatible driver for a custom hardware. The situation is the following: We are using a Cyclone II FPGA with a nommu NiosII processor and uClinux. We have an external TLV320AIC110 codec with I2C control interface and PCM audio interface. Into the FPGA we have a hardware module which controls both interfaces and basically copies x amount of data into a given memory position and vice versa. I have been looking at the documentation (which in my honest opinion is scarce) and many doubts have arisen. For example, should I used alsa or asoc? In my opinion, alsa documentation is more clear than asoc, but it is highlt oriented to pci drivers. As you can see it is a simple hardware which control registers are mapped into memory. Which part of the alsa driver takes care of accesing these hardware dependent registers? Maybe we should use some other standard hardware module into the FPGA to get better alsa compliance? I know these are very generic and begginer questions but, anyway, any help will be welcome. Thank you. Javier Martín

2 3

[alsa-devel] [PATCH 0/5 v2] ASoC Add TLV320AIC23 codec driver
by Arun KS 02 Oct '08

02 Oct '08

Hi all, This is the next version of patches for tlv320aic23 codec. Only patch 1 and 2 are different from their version 1 counterparts. Changes: ------------ Patch1 - Incorporated the comments from Mark Brown. Patch2- File name is changed to osk5912.c from 5912osk.c. Thanks Troy Kisky for your help and time. Since my mailer is word wrapping the patches, I am attaching them too. Thanks Arun

1 0

[alsa-devel] [PATCH]ASoC: Remove at91 and at32 directories
by Sedji Gaouaou 02 Oct '08

02 Oct '08

First patch to unify atmel audio dai. Remove at91 and at32 directories. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/at32/Kconfig | 34 -- sound/soc/at32/Makefile | 11 - sound/soc/at32/at32-pcm.c | 492 ----------------------- sound/soc/at32/at32-pcm.h | 79 ---- sound/soc/at32/at32-ssc.c | 849 --------------------------------------- sound/soc/at32/at32-ssc.h | 59 --- sound/soc/at32/playpaq_wm8510.c | 523 ------------------------ sound/soc/at91/Kconfig | 10 - sound/soc/at91/Makefile | 6 - sound/soc/at91/at91-pcm.c | 434 -------------------- sound/soc/at91/at91-pcm.h | 72 ---- sound/soc/at91/at91-ssc.c | 791 ------------------------------------ sound/soc/at91/at91-ssc.h | 27 -- 13 files changed, 0 insertions(+), 3387 deletions(-) delete mode 100644 sound/soc/at32/Kconfig delete mode 100644 sound/soc/at32/Makefile delete mode 100644 sound/soc/at32/at32-pcm.c delete mode 100644 sound/soc/at32/at32-pcm.h delete mode 100644 sound/soc/at32/at32-ssc.c delete mode 100644 sound/soc/at32/at32-ssc.h delete mode 100644 sound/soc/at32/playpaq_wm8510.c delete mode 100644 sound/soc/at91/Kconfig delete mode 100644 sound/soc/at91/Makefile delete mode 100644 sound/soc/at91/at91-pcm.c delete mode 100644 sound/soc/at91/at91-pcm.h delete mode 100644 sound/soc/at91/at91-ssc.c delete mode 100644 sound/soc/at91/at91-ssc.h diff --git a/sound/soc/at32/Kconfig b/sound/soc/at32/Kconfig deleted file mode 100644 index b0765e8..0000000 --- a/sound/soc/at32/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -config SND_AT32_SOC - tristate "SoC Audio for the Atmel AT32 System-on-a-Chip" - depends on AVR32 && SND_SOC - help - Say Y or M if you want to add support for codecs attached to - the AT32 SSC interface. You will also need to - to select the audio interfaces to support below. - - -config SND_AT32_SOC_SSC - tristate - - - -config SND_AT32_SOC_PLAYPAQ - tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_AT32_SOC && BOARD_PLAYPAQ - select SND_AT32_SOC_SSC - select SND_SOC_WM8510 - help - Say Y or M here if you want to add support for SoC audio - on the LRS PlayPaq. - - - -config SND_AT32_SOC_PLAYPAQ_SLAVE - bool "Run CODEC on PlayPaq in slave mode" - depends on SND_AT32_SOC_PLAYPAQ - default n - help - Say Y if you want to run with the AT32 SSC generating the BCLK - and FRAME signals on the PlayPaq. Unless you want to play - with the AT32 as the SSC master, you probably want to say N here, - as this will give you better sound quality. diff --git a/sound/soc/at32/Makefile b/sound/soc/at32/Makefile deleted file mode 100644 index c03e55e..0000000 --- a/sound/soc/at32/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# AT32 Platform Support -snd-soc-at32-objs := at32-pcm.o -snd-soc-at32-ssc-objs := at32-ssc.o - -obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o -obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o - -# AT32 Machine Support -snd-soc-playpaq-objs := playpaq_wm8510.o - -obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/at32/at32-pcm.c deleted file mode 100644 index c83584f..0000000 --- a/sound/soc/at32/at32-pcm.c +++ /dev/null @@ -1,492 +0,0 @@ -/* sound/soc/at32/at32-pcm.c - * ASoC PCM interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-pcm.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include "at32-pcm.h" - - - -/*--------------------------------------------------------------------------*\ - * Hardware definition -\*--------------------------------------------------------------------------*/ -/* TODO: These values were taken from the AT91 platform driver, check - * them against real values for AT32 - */ -static const struct snd_pcm_hardware at32_pcm_hardware = { - .info = (SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_PAUSE), - - .formats = SNDRV_PCM_FMTBIT_S16, - .period_bytes_min = 32, - .period_bytes_max = 8192, /* 512 frames * 16 bytes / frame */ - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, -}; - - - -/*--------------------------------------------------------------------------*\ - * Data types -\*--------------------------------------------------------------------------*/ -struct at32_runtime_data { - struct at32_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of DMA buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ - size_t period_size; - - dma_addr_t period_ptr; /* physical address of next period */ - int periods; /* period index of period_ptr */ - - /* Save PDC registers (for power management) */ - u32 pdc_xpr_save; - u32 pdc_xcr_save; - u32 pdc_xnpr_save; - u32 pdc_xncr_save; -}; - - - -/*--------------------------------------------------------------------------*\ - * Helper functions -\*--------------------------------------------------------------------------*/ -static int at32_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *dmabuf = &substream->dma_buffer; - size_t size = at32_pcm_hardware.buffer_bytes_max; - - dmabuf->dev.type = SNDRV_DMA_TYPE_DEV; - dmabuf->dev.dev = pcm->card->dev; - dmabuf->private_data = NULL; - dmabuf->area = dma_alloc_coherent(pcm->card->dev, size, - &dmabuf->addr, GFP_KERNEL); - pr_debug("at32_pcm: preallocate_dma_buffer: " - "area=%p, addr=%p, size=%ld\n", - (void *)dmabuf->area, (void *)dmabuf->addr, size); - - if (!dmabuf->area) - return -ENOMEM; - - dmabuf->bytes = size; - return 0; -} - - - -/*--------------------------------------------------------------------------*\ - * ISR -\*--------------------------------------------------------------------------*/ -static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; - static int count; - - count++; - if (ssc_sr & params->mask->ssc_endbuf) { - pr_warning("at32-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? - "underrun" : "overrun", params->name, ssc_sr, count); - - /* re-start the PDC */ - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) - prtd->period_ptr = prtd->dma_buffer; - - - ssc_writex(params->ssc->regs, params->pdc->xpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_enable); - } - - - if (ssc_sr & params->mask->ssc_endx) { - /* Load the PDC next pointer and counter registers */ - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) - prtd->period_ptr = prtd->dma_buffer; - ssc_writex(params->ssc->regs, params->pdc->xnpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - } - - - snd_pcm_period_elapsed(substream); -} - - - -/*--------------------------------------------------------------------------*\ - * PCM operations -\*--------------------------------------------------------------------------*/ -static int at32_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - - /* this may get called several times by oss emulation - * with different params - */ - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = params_buffer_bytes(params); - - prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at32_pcm_dma_irq; - - prtd->dma_buffer = runtime->dma_addr; - prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; - prtd->period_size = params_period_bytes(params); - - pr_debug("hw_params: DMA for %s initialized " - "(dma_bytes=%ld, period_size=%ld)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - - return 0; -} - - - -static int at32_pcm_hw_free(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - - if (params != NULL) { - ssc_writex(params->ssc->regs, SSC_PDC_PTCR, - params->mask->pdc_disable); - prtd->params->dma_intr_handler = NULL; - } - - return 0; -} - - - -static int at32_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - - ssc_writex(params->ssc->regs, SSC_IDR, - params->mask->ssc_endx | params->mask->ssc_endbuf); - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - - return 0; -} - - -static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) -{ - struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; - int ret = 0; - - pr_debug("at32_pcm_trigger: buffer_size = %ld, " - "dma_area = %p, dma_bytes = %ld\n", - rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - prtd->period_ptr = prtd->dma_buffer; - - ssc_writex(params->ssc->regs, params->pdc->xpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - prtd->period_ptr += prtd->period_size; - ssc_writex(params->ssc->regs, params->pdc->xnpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - - pr_debug("trigger: period_ptr=%lx, xpr=%x, " - "xcr=%d, xnpr=%x, xncr=%d\n", - (unsigned long)prtd->period_ptr, - ssc_readx(params->ssc->regs, params->pdc->xpr), - ssc_readx(params->ssc->regs, params->pdc->xcr), - ssc_readx(params->ssc->regs, params->pdc->xnpr), - ssc_readx(params->ssc->regs, params->pdc->xncr)); - - ssc_writex(params->ssc->regs, SSC_IER, - params->mask->ssc_endx | params->mask->ssc_endbuf); - ssc_writex(params->ssc->regs, SSC_PDC_PTCR, - params->mask->pdc_enable); - - pr_debug("sr=%x, imr=%x\n", - ssc_readx(params->ssc->regs, SSC_SR), - ssc_readx(params->ssc->regs, SSC_IER)); - break; /* SNDRV_PCM_TRIGGER_START */ - - - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - break; - - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_enable); - break; - - default: - ret = -EINVAL; - } - - return ret; -} - - - -static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - dma_addr_t ptr; - snd_pcm_uframes_t x; - - ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); - x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); - - if (x == runtime->buffer_size) - x = 0; - - return x; -} - - - -static int at32_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &at32_pcm_hardware); - - /* ensure that buffer size is a multiple of period size */ - ret = snd_pcm_hw_constraint_integer(runtime, - SNDRV_PCM_HW_PARAM_PERIODS); - if (ret < 0) - goto out; - - prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); - if (prtd == NULL) { - ret = -ENOMEM; - goto out; - } - runtime->private_data = prtd; - - -out: - return ret; -} - - - -static int at32_pcm_close(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - - kfree(prtd); - return 0; -} - - -static int at32_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - return remap_pfn_range(vma, vma->vm_start, - substream->dma_buffer.addr >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot); -} - - - -static struct snd_pcm_ops at32_pcm_ops = { - .open = at32_pcm_open, - .close = at32_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at32_pcm_hw_params, - .hw_free = at32_pcm_hw_free, - .prepare = at32_pcm_prepare, - .trigger = at32_pcm_trigger, - .pointer = at32_pcm_pointer, - .mmap = at32_pcm_mmap, -}; - - - -/*--------------------------------------------------------------------------*\ - * ASoC platform driver -\*--------------------------------------------------------------------------*/ -static u64 at32_pcm_dmamask = 0xffffffff; - -static int at32_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, - struct snd_pcm *pcm) -{ - int ret = 0; - - if (!card->dev->dma_mask) - card->dev->dma_mask = &at32_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->playback.channels_min) { - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->capture.channels_min) { - pr_debug("at32-pcm: Allocating PCM capture DMA buffer\n"); - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - - -out: - return ret; -} - - - -static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (substream == NULL) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - dma_free_coherent(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - - - -#ifdef CONFIG_PM -static int at32_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; - - if (runtime == NULL) - return 0; - prtd = runtime->private_data; - params = prtd->params; - - /* Disable the PDC and save the PDC registers */ - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - - prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); - prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); - prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); - prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); - - return 0; -} - - - -static int at32_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; - - if (runtime == NULL) - return 0; - prtd = runtime->private_data; - params = prtd->params; - - /* Restore the PDC registers and enable the PDC */ - ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); - ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); - ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); - ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); - - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable); - return 0; -} -#else /* CONFIG_PM */ -# define at32_pcm_suspend NULL -# define at32_pcm_resume NULL -#endif /* CONFIG_PM */ - - - -struct snd_soc_platform at32_soc_platform = { - .name = "at32-audio", - .pcm_ops = &at32_pcm_ops, - .pcm_new = at32_pcm_new, - .pcm_free = at32_pcm_free_dma_buffers, - .suspend = at32_pcm_suspend, - .resume = at32_pcm_resume, -}; -EXPORT_SYMBOL_GPL(at32_soc_platform); - - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("Atmel AT32 PCM module"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-pcm.h b/sound/soc/at32/at32-pcm.h deleted file mode 100644 index 2a52430..0000000 --- a/sound/soc/at32/at32-pcm.h +++ /dev/null @@ -1,79 +0,0 @@ -/* sound/soc/at32/at32-pcm.h - * ASoC PCM interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_PCM_H -#define __SOUND_SOC_AT32_AT32_PCM_H __FILE__ - -#include <linux/atmel-ssc.h> - - -/* - * Registers and status bits that are required by the PCM driver - * TODO: Is ptcr really used? - */ -struct at32_pdc_regs { - u32 xpr; /* PDC RX/TX pointer */ - u32 xcr; /* PDC RX/TX counter */ - u32 xnpr; /* PDC next RX/TX pointer */ - u32 xncr; /* PDC next RX/TX counter */ - u32 ptcr; /* PDC transfer control */ -}; - - - -/* - * SSC mask info - */ -struct at32_ssc_mask { - u32 ssc_enable; /* SSC RX/TX enable */ - u32 ssc_disable; /* SSC RX/TX disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFF or RXBUFF */ - u32 pdc_enable; /* PDC RX/TX enable */ - u32 pdc_disable; /* PDC RX/TX disable */ -}; - - - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at32_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - struct ssc_device *ssc; /* SSC device for stream */ - struct at32_pdc_regs *pdc; /* PDC register info */ - struct at32_ssc_mask *mask; /* SSC mask info */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler) (u32, struct snd_pcm_substream *); -}; - - - -/* - * The AT32 ASoC platform driver - */ -extern struct snd_soc_platform at32_soc_platform; - - - -/* - * SSC register access (since ssc_writel() / ssc_readl() require literal name) - */ -#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) -#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) - -#endif /* __SOUND_SOC_AT32_AT32_PCM_H */ diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c deleted file mode 100644 index 4ef6492..0000000 --- a/sound/soc/at32/at32-ssc.c +++ /dev/null @@ -1,849 +0,0 @@ -/* sound/soc/at32/at32-ssc.c - * ASoC platform driver for AT32 using SSC as DAI - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-ssc.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -/* #define DEBUG */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/atmel_pdc.h> -#include <linux/atmel-ssc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include "at32-pcm.h" -#include "at32-ssc.h" - - - -/*-------------------------------------------------------------------------*\ - * Constants -\*-------------------------------------------------------------------------*/ -#define NUM_SSC_DEVICES 3 - -/* - * SSC direction masks - */ -#define SSC_DIR_MASK_UNUSED 0 -#define SSC_DIR_MASK_PLAYBACK 1 -#define SSC_DIR_MASK_CAPTURE 2 - -/* - * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These - * are expected to be used with SSC_BF - */ -/* START bit field values */ -#define SSC_START_CONTINUOUS 0 -#define SSC_START_TX_RX 1 -#define SSC_START_LOW_RF 2 -#define SSC_START_HIGH_RF 3 -#define SSC_START_FALLING_RF 4 -#define SSC_START_RISING_RF 5 -#define SSC_START_LEVEL_RF 6 -#define SSC_START_EDGE_RF 7 -#define SSS_START_COMPARE_0 8 - -/* CKI bit field values */ -#define SSC_CKI_FALLING 0 -#define SSC_CKI_RISING 1 - -/* CKO bit field values */ -#define SSC_CKO_NONE 0 -#define SSC_CKO_CONTINUOUS 1 -#define SSC_CKO_TRANSFER 2 - -/* CKS bit field values */ -#define SSC_CKS_DIV 0 -#define SSC_CKS_CLOCK 1 -#define SSC_CKS_PIN 2 - -/* FSEDGE bit field values */ -#define SSC_FSEDGE_POSITIVE 0 -#define SSC_FSEDGE_NEGATIVE 1 - -/* FSOS bit field values */ -#define SSC_FSOS_NONE 0 -#define SSC_FSOS_NEGATIVE 1 -#define SSC_FSOS_POSITIVE 2 -#define SSC_FSOS_LOW 3 -#define SSC_FSOS_HIGH 4 -#define SSC_FSOS_TOGGLE 5 - -#define START_DELAY 1 - - - -/*-------------------------------------------------------------------------*\ - * Module data -\*-------------------------------------------------------------------------*/ -/* - * SSC PDC registered required by the PCM DMA engine - */ -static struct at32_pdc_regs pdc_tx_reg = { - .xpr = SSC_PDC_TPR, - .xcr = SSC_PDC_TCR, - .xnpr = SSC_PDC_TNPR, - .xncr = SSC_PDC_TNCR, -}; - - - -static struct at32_pdc_regs pdc_rx_reg = { - .xpr = SSC_PDC_RPR, - .xcr = SSC_PDC_RCR, - .xnpr = SSC_PDC_RNPR, - .xncr = SSC_PDC_RNCR, -}; - - - -/* - * SSC and PDC status bits for transmit and receive - */ -static struct at32_ssc_mask ssc_tx_mask = { - .ssc_enable = SSC_BIT(CR_TXEN), - .ssc_disable = SSC_BIT(CR_TXDIS), - .ssc_endx = SSC_BIT(SR_ENDTX), - .ssc_endbuf = SSC_BIT(SR_TXBUFE), - .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS), -}; - - - -static struct at32_ssc_mask ssc_rx_mask = { - .ssc_enable = SSC_BIT(CR_RXEN), - .ssc_disable = SSC_BIT(CR_RXDIS), - .ssc_endx = SSC_BIT(SR_ENDRX), - .ssc_endbuf = SSC_BIT(SR_RXBUFF), - .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS), -}; - - - -/* - * DMA parameters for each SSC - */ -static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - { - { - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, -}; - - - -static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, -}; - - - - -/*-------------------------------------------------------------------------*\ - * ISR -\*-------------------------------------------------------------------------*/ -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt - * handler in the PCM driver. - */ -static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id) -{ - struct at32_ssc_info *ssc_p = dev_id; - struct at32_pcm_dma_params *dma_params; - u32 ssc_sr; - u32 ssc_substream_mask; - int i; - - ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) & - ssc_readl(ssc_p->ssc->regs, IMR)); - - /* - * Loop through substreams attached to this SSC. If a DMA-related - * interrupt occured on that substream, call the DMA interrupt - * handler function, if one has been registered in the dma_param - * structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if ((dma_params != NULL) && - (dma_params->dma_intr_handler != NULL)) { - ssc_substream_mask = (dma_params->mask->ssc_endx | - dma_params->mask->ssc_endbuf); - if (ssc_sr & ssc_substream_mask) { - dma_params->dma_intr_handler(ssc_sr, - dma_params-> - substream); - } - } - } - - - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*\ - * DAI functions -\*-------------------------------------------------------------------------*/ -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at32_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - - - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at32_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - int dir_mask; - - dma_params = ssc_p->dma_params[substream->stream]; - - if (dma_params != NULL) { - ssc_writel(dma_params->ssc->regs, CR, - dma_params->mask->ssc_disable); - pr_debug("%s disabled SSC_SR=0x%08x\n", - (substream->stream ? "receiver" : "transmit"), - ssc_readl(ssc_p->ssc->regs, SR)); - - dma_params->ssc = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[substream->stream] = NULL; - } - - - dir_mask = 1 << substream->stream; - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock */ - pr_debug("at32-ssc: Stopping user %d clock\n", - ssc_p->ssc->user); - clk_disable(ssc_p->ssc->clk); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc->irq, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - /* clear the SSC dividers */ - ssc_p->cmr_div = 0; - ssc_p->tcmr_period = 0; - ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - - - -/* - * Set the SSC system clock rate - */ -static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* TODO: What the heck do I do here? */ - return 0; -} - - - -/* - * Record DAI format for use by hw_params() - */ -static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - - - -/* - * Record SSC clock dividers for use in hw_params() - */ -static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT32_SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT32_SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT32_SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - - - -/* - * Configure the SSC - */ -static int at32_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at32_ssc_info *ssc_p = &ssc_info[id]; - struct at32_pcm_dma_params *dma_params; - int channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - - /* - * Currently, there is only one set of dma_params for each direction. - * If more are added, this code will have to be changed to select - * the proper set - */ - dma_params = &ssc_dma_params[id][substream->stream]; - dma_params->ssc = ssc_p->ssc; - dma_params->substream = substream; - - ssc_p->dma_params[substream->stream] = dma_params; - - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the PCM driver's hw_params() - * function. It should not be used for other purposes as it - * is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - - /* - * Determine sample size in bits and the PDC increment - */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - - case SNDRV_PCM_FORMAT_S16: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - - case SNDRV_PCM_FORMAT_S24: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - - case SNDRV_PCM_FORMAT_S32: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - - default: - pr_warning("at32-ssc: Unsupported PCM format %d", - params_format(params)); - return -EINVAL; - } - pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n", - bits, dma_params->pdc_xfer_size, channels); - - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) - if (bits > 16) { - pr_warning("at32-ssc: " - "sample size %d is too large for I2S\n", - bits); - return -EINVAL; - } - - - /* - * Compute the SSC register settings - */ - switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | - SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRS clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, SSC_START_FALLING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(RFMR_FSLEN, bits - 1) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, SSC_START_FALLING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(TFMR_FSLEN, bits - 1) | - SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) | - SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clock. - * - * The SSC transmit clock is obtained from the BCLK signal - * on the TK line, and the SSC receive clock is generated from - * the transmit clock. - * - * For single channel data, one sample is transferred on the - * falling edge of the LRC clock. For two channel data, one - * sample is transferred on both edges of the LRC clock. - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n"); - start_event = ((channels == 1) ? - SSC_START_FALLING_RF : SSC_START_EDGE_RF); - - rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, start_event) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_CLOCK)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, start_event) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_NONE) | - SSC_BF(TCMR_CKS, SSC_CKS_PIN)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, 1) | - SSC_BF(RCMR_START, SSC_START_RISING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, 1) | - SSC_BF(TCMR_START, SSC_START_RISING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_RISING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(TFMR_DATNB, channels - 1) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - pr_warning("at32-ssc: unsupported DAI format 0x%x\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", - rcmr, rfmr, tcmr, tfmr); - - - if (!ssc_p->initialized) { - /* enable peripheral clock */ - pr_debug("at32-ssc: Starting clock\n"); - clk_enable(ssc_p->ssc->clk); - - /* Reset the SSC and its PDC registers */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); - - ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); - - ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0, - ssc_p->name, ssc_p); - if (ret < 0) { - pr_warning("at32-ssc: request irq failed (%d)\n", ret); - pr_debug("at32-ssc: Stopping clock\n"); - clk_disable(ssc_p->ssc->clk); - return ret; - } - - ssc_p->initialized = 1; - } - - /* Set SSC clock mode register */ - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); - - /* set transmit clock mode and format */ - ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); - ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); - - pr_debug("at32-ssc: SSC initialized\n"); - return 0; -} - - - -static int at32_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - - dma_params = ssc_p->dma_params[substream->stream]; - - ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable); - - return 0; -} - - - -#ifdef CONFIG_PM -static int at32_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive */ - ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); - - /* Save the current interrupt mask, then disable unmasked interrupts */ - ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); - ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); - ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); - ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); - ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); - ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); - - return 0; -} - - - -static int at32_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - u32 cr; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* restore SSC register settings */ - ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); - ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); - ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); - - /* re-enable interrupts */ - ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); - - /* Re-enable recieve and transmit as appropriate */ - cr = 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; - ssc_writel(ssc_p->ssc->regs, CR, cr); - - return 0; -} -#else /* CONFIG_PM */ -# define at32_ssc_suspend NULL -# define at32_ssc_resume NULL -#endif /* CONFIG_PM */ - - -#define AT32_SSC_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - - -#define AT32_SSC_FORMATS \ - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \ - SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32) - - -struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = { - { - .name = "at32-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[0], - }, - { - .name = "at32-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[1], - }, - { - .name = "at32-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[2], - }, -}; -EXPORT_SYMBOL_GPL(at32_ssc_dai); - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("AT32 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-ssc.h b/sound/soc/at32/at32-ssc.h deleted file mode 100644 index 3c052db..0000000 --- a/sound/soc/at32/at32-ssc.h +++ /dev/null @@ -1,59 +0,0 @@ -/* sound/soc/at32/at32-ssc.h - * ASoC SSC interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_SSC_H -#define __SOUND_SOC_AT32_AT32_SSC_H __FILE__ - -#include <linux/types.h> -#include <linux/atmel-ssc.h> - -#include "at32-pcm.h" - - - -struct at32_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - - - -struct at32_ssc_info { - char *name; - struct ssc_device *ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* true if SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at32_pcm_dma_params *dma_params[2]; - struct at32_ssc_state ssc_state; -}; - - -/* SSC divider ids */ -#define AT32_SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT32_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT32_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - - -extern struct snd_soc_dai at32_ssc_dai[]; - - - -#endif /* __SOUND_SOC_AT32_AT32_SSC_H */ diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c deleted file mode 100644 index 7e6560b..0000000 --- a/sound/soc/at32/playpaq_wm8510.c +++ /dev/null @@ -1,523 +0,0 @@ -/* sound/soc/at32/playpaq_wm8510.c - * ASoC machine driver for PlayPaq using WM8510 codec - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c - * - * NOTE: If you don't have the AT32 enhanced portmux configured (which - * isn't currently in the mainline or Atmel patched kernel), you will - * need to set the MCLK pin (PA30) to peripheral A in your board initialization - * code. Something like: - * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); - * - */ - -/* #define DEBUG */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/version.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <mach/at32ap700x.h> -#include <mach/portmux.h> - -#include "../codecs/wm8510.h" -#include "at32-pcm.h" -#include "at32-ssc.h" - - -/*-------------------------------------------------------------------------*\ - * constants -\*-------------------------------------------------------------------------*/ -#define MCLK_PIN GPIO_PIN_PA(30) -#define MCLK_PERIPH GPIO_PERIPH_A - - -/*-------------------------------------------------------------------------*\ - * data types -\*-------------------------------------------------------------------------*/ -/* SSC clocking data */ -struct ssc_clock_data { - /* CMR div */ - unsigned int cmr_div; - - /* Frame period (as needed by xCMR.PERIOD) */ - unsigned int period; - - /* The SSC clock rate these settings where calculated for */ - unsigned long ssc_rate; -}; - - -/*-------------------------------------------------------------------------*\ - * module data -\*-------------------------------------------------------------------------*/ -static struct clk *_gclk0; -static struct clk *_pll0; - -#define CODEC_CLK (_gclk0) - - -/*-------------------------------------------------------------------------*\ - * Sound SOC operations -\*-------------------------------------------------------------------------*/ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE -static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( - struct snd_pcm_hw_params *params, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p = cpu_dai->private_data; - struct ssc_device *ssc = ssc_p->ssc; - struct ssc_clock_data cd; - unsigned int rate, width_bits, channels; - unsigned int bitrate, ssc_div; - unsigned actual_rate; - - - /* - * Figure out required bitrate - */ - rate = params_rate(params); - channels = params_channels(params); - width_bits = snd_pcm_format_physical_width(params_format(params)); - bitrate = rate * width_bits * channels; - - - /* - * Figure out required SSC divider and period for required bitrate - */ - cd.ssc_rate = clk_get_rate(ssc->clk); - ssc_div = cd.ssc_rate / bitrate; - cd.cmr_div = ssc_div / 2; - if (ssc_div & 1) { - /* round cmr_div up */ - cd.cmr_div++; - } - cd.period = width_bits - 1; - - - /* - * Find actual rate, compare to requested rate - */ - actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); - pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", - rate, actual_rate); - - - return cd; -} -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - -static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - struct at32_ssc_info *ssc_p = cpu_dai->private_data; - struct ssc_device *ssc = ssc_p->ssc; - unsigned int pll_out = 0, bclk = 0, mclk_div = 0; - int ret; - - - /* Due to difficulties with getting the correct clocks from the AT32's - * PLL0, we're going to let the CODEC be in charge of all the clocks - */ -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); -#else - struct ssc_clock_data cd; - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); -#endif - - if (ssc == NULL) { - pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); - return -EINVAL; - } - - - /* - * Figure out PLL and BCLK dividers for WM8510 - */ - switch (params_rate(params)) { - case 48000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_1; - bclk = WM8510_BCLKDIV_8; - break; - - case 44100: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_1; - bclk = WM8510_BCLKDIV_8; - break; - - case 22050: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 16000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_3; - bclk = WM8510_BCLKDIV_8; - break; - - case 11025: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_4; - bclk = WM8510_BCLKDIV_8; - break; - - case 8000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_6; - bclk = WM8510_BCLKDIV_8; - break; - - default: - pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", - params_rate(params)); - return -EINVAL; - } - - - /* - * set CPU and CODEC DAI configuration - */ - ret = snd_soc_dai_set_fmt(codec_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CODEC DAI format (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_fmt(cpu_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU DAI format (%d)\n", - ret); - return ret; - } - - - /* - * Set CPU clock configuration - */ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); - pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", - cd.cmr_div, cd.period); - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, - cd.period); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU transmit period (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - /* - * Set CODEC clock configuration - */ - pr_debug("playpaq_wm8510: " - "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", - clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); - - -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); - if (ret < 0) { - pr_warning - ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - ret = snd_soc_dai_set_pll(codec_dai, 0, - clk_get_rate(CODEC_CLK), pll_out); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", - ret); - return ret; - } - - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", - ret); - return ret; - } - - - return 0; -} - - - -static struct snd_soc_ops playpaq_wm8510_ops = { - .hw_params = playpaq_wm8510_hw_params, -}; - - - -static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Int Mic", NULL), - SND_SOC_DAPM_SPK("Ext Spk", NULL), -}; - - - -static const char *intercon[][3] = { - /* speaker connected to SPKOUT */ - {"Ext Spk", NULL, "SPKOUTP"}, - {"Ext Spk", NULL, "SPKOUTN"}, - - {"Mic Bias", NULL, "Int Mic"}, - {"MICN", NULL, "Mic Bias"}, - {"MICP", NULL, "Mic Bias"}, - - /* Terminator */ - {NULL, NULL, NULL}, -}; - - - -static int playpaq_wm8510_init(struct snd_soc_codec *codec) -{ - int i; - - /* - * Add DAPM widgets - */ - for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); - - - - /* - * Setup audio path interconnects - */ - for (i = 0; intercon[i][0] != NULL; i++) { - snd_soc_dapm_connect_input(codec, - intercon[i][0], - intercon[i][1], intercon[i][2]); - } - - - /* always connected pins */ - snd_soc_dapm_enable_pin(codec, "Int Mic"); - snd_soc_dapm_enable_pin(codec, "Ext Spk"); - snd_soc_dapm_sync(codec); - - - - /* Make CSB show PLL rate */ - snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, - WM8510_OPCLKDIV_1 | 4); - - return 0; -} - - - -static struct snd_soc_dai_link playpaq_wm8510_dai = { - .name = "WM8510", - .stream_name = "WM8510 PCM", - .cpu_dai = &at32_ssc_dai[0], - .codec_dai = &wm8510_dai, - .init = playpaq_wm8510_init, - .ops = &playpaq_wm8510_ops, -}; - - - -static struct snd_soc_machine snd_soc_machine_playpaq = { - .name = "LRS_PlayPaq_WM8510", - .dai_link = &playpaq_wm8510_dai, - .num_links = 1, -}; - - - -static struct wm8510_setup_data playpaq_wm8510_setup = { - .i2c_bus = 0, - .i2c_address = 0x1a, -}; - - - -static struct snd_soc_device playpaq_wm8510_snd_devdata = { - .machine = &snd_soc_machine_playpaq, - .platform = &at32_soc_platform, - .codec_dev = &soc_codec_dev_wm8510, - .codec_data = &playpaq_wm8510_setup, -}; - -static struct platform_device *playpaq_snd_device; - - -static int __init playpaq_asoc_init(void) -{ - int ret = 0; - struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; - struct ssc_device *ssc = NULL; - - - /* - * Request SSC device - */ - ssc = ssc_request(0); - if (IS_ERR(ssc)) { - ret = PTR_ERR(ssc); - ssc = NULL; - goto err_ssc; - } - ssc_p->ssc = ssc; - - - /* - * Configure MCLK for WM8510 - */ - _gclk0 = clk_get(NULL, "gclk0"); - if (IS_ERR(_gclk0)) { - _gclk0 = NULL; - goto err_gclk0; - } - _pll0 = clk_get(NULL, "pll0"); - if (IS_ERR(_pll0)) { - _pll0 = NULL; - goto err_pll0; - } - if (clk_set_parent(_gclk0, _pll0)) { - pr_warning("snd-soc-playpaq: " - "Failed to set PLL0 as parent for DAC clock\n"); - goto err_set_clk; - } - clk_set_rate(CODEC_CLK, 12000000); - clk_enable(CODEC_CLK); - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); -#endif - - - /* - * Create and register platform device - */ - playpaq_snd_device = platform_device_alloc("soc-audio", 0); - if (playpaq_snd_device == NULL) { - ret = -ENOMEM; - goto err_device_alloc; - } - - platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); - playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; - - ret = platform_device_add(playpaq_snd_device); - if (ret) { - pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", - ret); - goto err_device_add; - } - - return 0; - - -err_device_add: - if (playpaq_snd_device != NULL) { - platform_device_put(playpaq_snd_device); - playpaq_snd_device = NULL; - } -err_device_alloc: -err_set_clk: - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } -err_pll0: - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } -err_gclk0: - if (ssc != NULL) { - ssc_free(ssc); - ssc = NULL; - } -err_ssc: - return ret; -} - - -static void __exit playpaq_asoc_exit(void) -{ - struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; - struct ssc_device *ssc; - - if (ssc_p != NULL) { - ssc = ssc_p->ssc; - if (ssc != NULL) - ssc_free(ssc); - ssc_p->ssc = NULL; - } - - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_free_pin(MCLK_PIN); -#endif - - platform_device_unregister(playpaq_snd_device); - playpaq_snd_device = NULL; -} - -module_init(playpaq_asoc_init); -module_exit(playpaq_asoc_exit); - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/Kconfig b/sound/soc/at91/Kconfig deleted file mode 100644 index 85a8832..0000000 --- a/sound/soc/at91/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config SND_AT91_SOC - tristate "SoC Audio for the Atmel AT91 System-on-Chip" - depends on ARCH_AT91 - help - Say Y or M if you want to add support for codecs attached to - the AT91 SSC interface. You will also need - to select the audio interfaces to support below. - -config SND_AT91_SOC_SSC - tristate diff --git a/sound/soc/at91/Makefile b/sound/soc/at91/Makefile deleted file mode 100644 index b817f11..0000000 --- a/sound/soc/at91/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# AT91 Platform Support -snd-soc-at91-objs := at91-pcm.o -snd-soc-at91-ssc-objs := at91-ssc.o - -obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o -obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c deleted file mode 100644 index 7ab48bd..0000000 --- a/sound/soc/at91/at91-pcm.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * at91-pcm.c -- ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.c by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" - -#if 0 -#define DBG(x...) printk(KERN_INFO "at91-pcm: " x) -#else -#define DBG(x...) -#endif - -static const struct snd_pcm_hardware at91_pcm_hardware = { - .info = SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .period_bytes_min = 32, - .period_bytes_max = 8192, - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, -}; - -struct at91_runtime_data { - struct at91_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of dma buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ - size_t period_size; - dma_addr_t period_ptr; /* physical address of next period */ - u32 pdc_xpr_save; /* PDC register save */ - u32 pdc_xcr_save; - u32 pdc_xnpr_save; - u32 pdc_xncr_save; -}; - -static void at91_pcm_dma_irq(u32 ssc_sr, - struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - static int count = 0; - - count++; - - if (ssc_sr & params->mask->ssc_endbuf) { - - printk(KERN_WARNING - "at91-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK - ? "underrun" : "overrun", - params->name, ssc_sr, count); - - /* re-start the PDC */ - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - } - - if (ssc_sr & params->mask->ssc_endx) { - - /* Load the PDC next pointer and counter registers */ - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - at91_ssc_write(params->ssc_base + params->pdc->xnpr, - prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - } - - snd_pcm_period_elapsed(substream); -} - -static int at91_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - - /* this may get called several times by oss emulation - * with different params */ - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = params_buffer_bytes(params); - - prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at91_pcm_dma_irq; - - prtd->dma_buffer = runtime->dma_addr; - prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; - prtd->period_size = params_period_bytes(params); - - DBG("hw_params: DMA for %s initialized (dma_bytes=%d, period_size=%d)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - return 0; -} - -static int at91_pcm_hw_free(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - if (params != NULL) { - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - prtd->params->dma_intr_handler = NULL; - } - - return 0; -} - -static int at91_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - at91_ssc_write(params->ssc_base + AT91_SSC_IDR, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - return 0; -} - -static int at91_pcm_trigger(struct snd_pcm_substream *substream, - int cmd) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - int ret = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - prtd->period_ptr = prtd->dma_buffer; - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - prtd->period_ptr += prtd->period_size; - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - - DBG("trigger: period_ptr=%lx, xpr=%lx, xcr=%ld, xnpr=%lx, xncr=%ld\n", - (unsigned long) prtd->period_ptr, - at91_ssc_read(params->ssc_base + params->pdc->xpr), - at91_ssc_read(params->ssc_base + params->pdc->xcr), - at91_ssc_read(params->ssc_base + params->pdc->xnpr), - at91_ssc_read(params->ssc_base + params->pdc->xncr)); - - at91_ssc_write(params->ssc_base + AT91_SSC_IER, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, - params->mask->pdc_enable); - - DBG("sr=%lx imr=%lx\n", - at91_ssc_read(params->ssc_base + AT91_SSC_SR), - at91_ssc_read(params->ssc_base + AT91_SSC_IMR)); - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - break; - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - break; - - default: - ret = -EINVAL; - } - - return ret; -} - -static snd_pcm_uframes_t at91_pcm_pointer( - struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - dma_addr_t ptr; - snd_pcm_uframes_t x; - - ptr = (dma_addr_t) at91_ssc_read(params->ssc_base + params->pdc->xpr); - x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); - - if (x == runtime->buffer_size) - x = 0; - return x; -} - -static int at91_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &at91_pcm_hardware); - - /* ensure that buffer size is a multiple of period size */ - ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); - if (ret < 0) - goto out; - - prtd = kzalloc(sizeof(struct at91_runtime_data), GFP_KERNEL); - if (prtd == NULL) { - ret = -ENOMEM; - goto out; - } - runtime->private_data = prtd; - - out: - return ret; -} - -static int at91_pcm_close(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - - kfree(prtd); - return 0; -} - -static int at91_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - - return dma_mmap_writecombine(substream->pcm->card->dev, vma, - runtime->dma_area, - runtime->dma_addr, - runtime->dma_bytes); -} - -struct snd_pcm_ops at91_pcm_ops = { - .open = at91_pcm_open, - .close = at91_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at91_pcm_hw_params, - .hw_free = at91_pcm_hw_free, - .prepare = at91_pcm_prepare, - .trigger = at91_pcm_trigger, - .pointer = at91_pcm_pointer, - .mmap = at91_pcm_mmap, -}; - -static int at91_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, - int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *buf = &substream->dma_buffer; - size_t size = at91_pcm_hardware.buffer_bytes_max; - - buf->dev.type = SNDRV_DMA_TYPE_DEV; - buf->dev.dev = pcm->card->dev; - buf->private_data = NULL; - buf->area = dma_alloc_writecombine(pcm->card->dev, size, - &buf->addr, GFP_KERNEL); - - DBG("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", - (void *) buf->area, - (void *) buf->addr, - size); - - if (!buf->area) - return -ENOMEM; - - buf->bytes = size; - return 0; -} - -static u64 at91_pcm_dmamask = 0xffffffff; - -static int at91_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, struct snd_pcm *pcm) -{ - int ret = 0; - - if (!card->dev->dma_mask) - card->dev->dma_mask = &at91_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->playback.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->capture.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - out: - return ret; -} - -static void at91_pcm_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (!substream) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - - dma_free_writecombine(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - -#ifdef CONFIG_PM -static int at91_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* disable the PDC and save the PDC registers */ - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->pdc_xpr_save = at91_ssc_read(params->ssc_base + params->pdc->xpr); - prtd->pdc_xcr_save = at91_ssc_read(params->ssc_base + params->pdc->xcr); - prtd->pdc_xnpr_save = at91_ssc_read(params->ssc_base + params->pdc->xnpr); - prtd->pdc_xncr_save = at91_ssc_read(params->ssc_base + params->pdc->xncr); - - return 0; -} - -static int at91_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* restore the PDC registers and enable the PDC */ - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->pdc_xpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xcr, prtd->pdc_xcr_save); - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->pdc_xnpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xncr, prtd->pdc_xncr_save); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - return 0; -} -#else -#define at91_pcm_suspend NULL -#define at91_pcm_resume NULL -#endif - -struct snd_soc_platform at91_soc_platform = { - .name = "at91-audio", - .pcm_ops = &at91_pcm_ops, - .pcm_new = at91_pcm_new, - .pcm_free = at91_pcm_free_dma_buffers, - .suspend = at91_pcm_suspend, - .resume = at91_pcm_resume, -}; - -EXPORT_SYMBOL_GPL(at91_soc_platform); - -MODULE_AUTHOR("Frank Mandarino <fmandarino(a)endrelia.com>"); -MODULE_DESCRIPTION("Atmel AT91 PCM module"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h deleted file mode 100644 index e5aada2..0000000 --- a/sound/soc/at91/at91-pcm.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.h by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_PCM_H -#define _AT91_PCM_H - -#include <mach/hardware.h> - -struct at91_ssc_periph { - void __iomem *base; - u32 pid; -}; - -/* - * Registers and status bits that are required by the PCM driver. - */ -struct at91_pdc_regs { - unsigned int xpr; /* PDC recv/trans pointer */ - unsigned int xcr; /* PDC recv/trans counter */ - unsigned int xnpr; /* PDC next recv/trans pointer */ - unsigned int xncr; /* PDC next recv/trans counter */ - unsigned int ptcr; /* PDC transfer control */ -}; - -struct at91_ssc_mask { - u32 ssc_enable; /* SSC recv/trans enable */ - u32 ssc_disable; /* SSC recv/trans disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ - u32 pdc_enable; /* PDC recv/trans enable */ - u32 pdc_disable; /* PDC recv/trans disable */ -}; - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at91_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - void __iomem *ssc_base; /* SSC base address */ - struct at91_pdc_regs *pdc; /* PDC receive or transmit registers */ - struct at91_ssc_mask *mask;/* SSC & PDC status bits */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler)(u32, struct snd_pcm_substream *); -}; - -extern struct snd_soc_platform at91_soc_platform; - -#define at91_ssc_read(a) ((unsigned long) __raw_readl(a)) -#define at91_ssc_write(a,v) __raw_writel((v),(a)) - -#endif /* _AT91_PCM_H */ diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c deleted file mode 100644 index a5b1a79..0000000 --- a/sound/soc/at91/at91-ssc.c +++ /dev/null @@ -1,791 +0,0 @@ -/* - * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * - * Based on pxa2xx Platform drivers by - * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_pmc.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" -#include "at91-ssc.h" - -#if 0 -#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x) -#else -#define DBG(x...) -#endif - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#define NUM_SSC_DEVICES 1 -#else -#define NUM_SSC_DEVICES 3 -#endif - - -/* - * SSC PDC registers required by the PCM DMA engine. - */ -static struct at91_pdc_regs pdc_tx_reg = { - .xpr = ATMEL_PDC_TPR, - .xcr = ATMEL_PDC_TCR, - .xnpr = ATMEL_PDC_TNPR, - .xncr = ATMEL_PDC_TNCR, -}; - -static struct at91_pdc_regs pdc_rx_reg = { - .xpr = ATMEL_PDC_RPR, - .xcr = ATMEL_PDC_RCR, - .xnpr = ATMEL_PDC_RNPR, - .xncr = ATMEL_PDC_RNCR, -}; - -/* - * SSC & PDC status bits for transmit and receive. - */ -static struct at91_ssc_mask ssc_tx_mask = { - .ssc_enable = AT91_SSC_TXEN, - .ssc_disable = AT91_SSC_TXDIS, - .ssc_endx = AT91_SSC_ENDTX, - .ssc_endbuf = AT91_SSC_TXBUFE, - .pdc_enable = ATMEL_PDC_TXTEN, - .pdc_disable = ATMEL_PDC_TXTDIS, -}; - -static struct at91_ssc_mask ssc_rx_mask = { - .ssc_enable = AT91_SSC_RXEN, - .ssc_disable = AT91_SSC_RXDIS, - .ssc_endx = AT91_SSC_ENDRX, - .ssc_endbuf = AT91_SSC_RXBUFF, - .pdc_enable = ATMEL_PDC_RXTEN, - .pdc_disable = ATMEL_PDC_RXTDIS, -}; - - -/* - * DMA parameters. - */ -static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - {{ - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#if NUM_SSC_DEVICES == 3 - {{ - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, - {{ - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#endif -}; - -struct at91_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - -static struct at91_ssc_info { - char *name; - struct at91_ssc_periph ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* 1=SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at91_pcm_dma_params *dma_params[2]; - struct at91_ssc_state ssc_state; - -} ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = 0, - .initialized = 0, - }, -#if NUM_SSC_DEVICES == 3 - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = 0, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = 0, - .initialized = 0, - }, -#endif -}; - -static unsigned int at91_ssc_sysclk; - -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA - * interrupt handler in the PCM driver. - */ -static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id) -{ - struct at91_ssc_info *ssc_p = dev_id; - struct at91_pcm_dma_params *dma_params; - u32 ssc_sr; - int i; - - ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR) - & at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - - /* - * Loop through the substreams attached to this SSC. If - * a DMA-related interrupt occurred on that substream, call - * the DMA interrupt handler function, if one has been - * registered in the dma_params structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if (dma_params != NULL && dma_params->dma_intr_handler != NULL && - (ssc_sr & - (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf))) - - dma_params->dma_intr_handler(ssc_sr, dma_params->substream); - } - - return IRQ_HANDLED; -} - -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at91_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - DBG("ssc_startup: SSC_SR=0x%08lx\n", - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2; - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at91_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir, dir_mask; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - if (dma_params != NULL) { - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_disable); - DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"), - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - - dma_params->ssc_base = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[dir] = NULL; - } - - dir_mask = 1 << dir; - - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock. */ - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc.pid, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - /* Clear the SSC dividers */ - ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - -/* - * Record the SSC system clock rate. - */ -static int at91_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* - * The only clock supplied to the SSC is the AT91 master clock, - * which is only used if the SSC is generating BCLK and/or - * LRC clocks. - */ - switch (clk_id) { - case AT91_SYSCLK_MCK: - at91_ssc_sysclk = freq; - break; - default: - return -EINVAL; - } - - return 0; -} - -/* - * Record the DAI format for use in hw_params(). - */ -static int at91_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - -/* - * Record SSC clock dividers for use in hw_params(). - */ -static int at91_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT91SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value. - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else - if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT91SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT91SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - -/* - * Configure the SSC. - */ -static int at91_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at91_ssc_info *ssc_p = &ssc_info[id]; - struct at91_pcm_dma_params *dma_params; - int dir, channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - /* - * Currently, there is only one set of dma params for - * each direction. If more are added, this code will - * have to be changed to select the proper set. - */ - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - - dma_params = &ssc_dma_params[id][dir]; - dma_params->ssc_base = ssc_p->ssc.base; - dma_params->substream = substream; - - ssc_p->dma_params[dir] = dma_params; - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the pcm driver hw_params() - * function. It should not be used for other purposes - * as it is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - /* - * Determine sample size in bits and the PDC increment. - */ - switch(params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - case SNDRV_PCM_FORMAT_S16_LE: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - case SNDRV_PCM_FORMAT_S24_LE: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - case SNDRV_PCM_FORMAT_S32_LE: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - default: - printk(KERN_WARNING "at91-ssc: unsupported PCM format\n"); - return -EINVAL; - } - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S - && bits > 16) { - printk(KERN_WARNING - "at91-ssc: sample size %d is too large for I2S\n", bits); - return -EINVAL; - } - - /* - * Compute SSC register settings. - */ - switch (ssc_p->daifmt - & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clocks. - * - * The SSC transmit clock is obtained from the BCLK signal on - * on the TK line, and the SSC receive clock is generated from the - * transmit clock. - * - * For single channel data, one sample is transferred on the falling - * edge of the LRC clock. For two channel data, one sample is - * transferred on both edges of the LRC clock. - */ - start_event = channels == 1 - ? AT91_SSC_START_FALLING_RF - : AT91_SSC_START_EDGE_RF; - - rcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_CLOCK ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_PIN ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - - - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr); - - if (!ssc_p->initialized) { - - /* Enable PMC peripheral clock for this SSC */ - DBG("Starting pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid); - - /* Reset the SSC and its PDC registers */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0); - - if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt, - 0, ssc_p->name, ssc_p)) < 0) { - printk(KERN_WARNING "at91-ssc: request_irq failure\n"); - - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - return ret; - } - - ssc_p->initialized = 1; - } - - /* set SSC clock mode register */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, rfmr); - - /* set transmit clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, tfmr); - - DBG("hw_params: SSC initialized\n"); - return 0; -} - - -static int at91_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_enable); - - DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit", - at91_ssc_read(dma_params->ssc_base + AT91_SSC_SR)); - return 0; -} - - -#ifdef CONFIG_PM -static int at91_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive. */ - ssc_p->ssc_state.ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - AT91_SSC_TXDIS | AT91_SSC_RXDIS); - - /* Save the current interrupt mask, then disable unmasked interrupts. */ - ssc_p->ssc_state.ssc_imr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_CMR); - ssc_p->ssc_state.ssc_rcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RCMR); - ssc_p->ssc_state.ssc_rfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RFMR); - ssc_p->ssc_state.ssc_tcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TCMR); - ssc_p->ssc_state.ssc_tfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TFMR); - - return 0; -} - -static int at91_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, ssc_p->ssc_state.ssc_tfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, ssc_p->ssc_state.ssc_tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, ssc_p->ssc_state.ssc_rfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, ssc_p->ssc_state.ssc_rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->ssc_state.ssc_cmr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IER, ssc_p->ssc_state.ssc_imr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_RXENA) ? AT91_SSC_RXEN : 0) | - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_TXENA) ? AT91_SSC_TXEN : 0)); - - return 0; -} - -#else -#define at91_ssc_suspend NULL -#define at91_ssc_resume NULL -#endif - -#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ - SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ - SNDRV_PCM_RATE_96000) - -#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) - -struct snd_soc_dai at91_ssc_dai[NUM_SSC_DEVICES] = { - { .name = "at91-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[0].ssc, - }, -#if NUM_SSC_DEVICES == 3 - { .name = "at91-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[1].ssc, - }, - { .name = "at91-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[2].ssc, - }, -#endif -}; - -EXPORT_SYMBOL_GPL(at91_ssc_dai); - -/* Module information */ -MODULE_AUTHOR("Frank Mandarino, fmandarino(a)endrelia.com, www.endrelia.com"); -MODULE_DESCRIPTION("AT91 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-ssc.h b/sound/soc/at91/at91-ssc.h deleted file mode 100644 index 6b7bf38..0000000 --- a/sound/soc/at91/at91-ssc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * at91-ssc.h - ALSA SSC interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Jan 9, 2007 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_SSC_H -#define _AT91_SSC_H - -/* SSC system clock ids */ -#define AT91_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ - -/* SSC divider ids */ -#define AT91SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT91SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - -extern struct snd_soc_dai at91_ssc_dai[]; - -#endif /* _AT91_SSC_H */ - -- 1.5.3.7

1 0

[alsa-devel] [PATCH] ASoC: Remove at91 and at32 directories
by Sedji Gaouaou 01 Oct '08

01 Oct '08

First patch to unify atmel audio dai. Remove at91 and at32 directories. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/at32/Kconfig | 34 -- sound/soc/at32/Makefile | 11 - sound/soc/at32/at32-pcm.c | 492 ----------------------- sound/soc/at32/at32-pcm.h | 79 ---- sound/soc/at32/at32-ssc.c | 849 --------------------------------------- sound/soc/at32/at32-ssc.h | 59 --- sound/soc/at32/playpaq_wm8510.c | 523 ------------------------ sound/soc/at91/Kconfig | 10 - sound/soc/at91/Makefile | 6 - sound/soc/at91/at91-pcm.c | 434 -------------------- sound/soc/at91/at91-pcm.h | 72 ---- sound/soc/at91/at91-ssc.c | 791 ------------------------------------ sound/soc/at91/at91-ssc.h | 27 -- 13 files changed, 0 insertions(+), 3387 deletions(-) delete mode 100644 sound/soc/at32/Kconfig delete mode 100644 sound/soc/at32/Makefile delete mode 100644 sound/soc/at32/at32-pcm.c delete mode 100644 sound/soc/at32/at32-pcm.h delete mode 100644 sound/soc/at32/at32-ssc.c delete mode 100644 sound/soc/at32/at32-ssc.h delete mode 100644 sound/soc/at32/playpaq_wm8510.c delete mode 100644 sound/soc/at91/Kconfig delete mode 100644 sound/soc/at91/Makefile delete mode 100644 sound/soc/at91/at91-pcm.c delete mode 100644 sound/soc/at91/at91-pcm.h delete mode 100644 sound/soc/at91/at91-ssc.c delete mode 100644 sound/soc/at91/at91-ssc.h diff --git a/sound/soc/at32/Kconfig b/sound/soc/at32/Kconfig deleted file mode 100644 index b0765e8..0000000 --- a/sound/soc/at32/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -config SND_AT32_SOC - tristate "SoC Audio for the Atmel AT32 System-on-a-Chip" - depends on AVR32 && SND_SOC - help - Say Y or M if you want to add support for codecs attached to - the AT32 SSC interface. You will also need to - to select the audio interfaces to support below. - - -config SND_AT32_SOC_SSC - tristate - - - -config SND_AT32_SOC_PLAYPAQ - tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_AT32_SOC && BOARD_PLAYPAQ - select SND_AT32_SOC_SSC - select SND_SOC_WM8510 - help - Say Y or M here if you want to add support for SoC audio - on the LRS PlayPaq. - - - -config SND_AT32_SOC_PLAYPAQ_SLAVE - bool "Run CODEC on PlayPaq in slave mode" - depends on SND_AT32_SOC_PLAYPAQ - default n - help - Say Y if you want to run with the AT32 SSC generating the BCLK - and FRAME signals on the PlayPaq. Unless you want to play - with the AT32 as the SSC master, you probably want to say N here, - as this will give you better sound quality. diff --git a/sound/soc/at32/Makefile b/sound/soc/at32/Makefile deleted file mode 100644 index c03e55e..0000000 --- a/sound/soc/at32/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# AT32 Platform Support -snd-soc-at32-objs := at32-pcm.o -snd-soc-at32-ssc-objs := at32-ssc.o - -obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o -obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o - -# AT32 Machine Support -snd-soc-playpaq-objs := playpaq_wm8510.o - -obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/at32/at32-pcm.c deleted file mode 100644 index c83584f..0000000 --- a/sound/soc/at32/at32-pcm.c +++ /dev/null @@ -1,492 +0,0 @@ -/* sound/soc/at32/at32-pcm.c - * ASoC PCM interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-pcm.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include "at32-pcm.h" - - - -/*--------------------------------------------------------------------------*\ - * Hardware definition -\*--------------------------------------------------------------------------*/ -/* TODO: These values were taken from the AT91 platform driver, check - * them against real values for AT32 - */ -static const struct snd_pcm_hardware at32_pcm_hardware = { - .info = (SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_PAUSE), - - .formats = SNDRV_PCM_FMTBIT_S16, - .period_bytes_min = 32, - .period_bytes_max = 8192, /* 512 frames * 16 bytes / frame */ - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, -}; - - - -/*--------------------------------------------------------------------------*\ - * Data types -\*--------------------------------------------------------------------------*/ -struct at32_runtime_data { - struct at32_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of DMA buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ - size_t period_size; - - dma_addr_t period_ptr; /* physical address of next period */ - int periods; /* period index of period_ptr */ - - /* Save PDC registers (for power management) */ - u32 pdc_xpr_save; - u32 pdc_xcr_save; - u32 pdc_xnpr_save; - u32 pdc_xncr_save; -}; - - - -/*--------------------------------------------------------------------------*\ - * Helper functions -\*--------------------------------------------------------------------------*/ -static int at32_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *dmabuf = &substream->dma_buffer; - size_t size = at32_pcm_hardware.buffer_bytes_max; - - dmabuf->dev.type = SNDRV_DMA_TYPE_DEV; - dmabuf->dev.dev = pcm->card->dev; - dmabuf->private_data = NULL; - dmabuf->area = dma_alloc_coherent(pcm->card->dev, size, - &dmabuf->addr, GFP_KERNEL); - pr_debug("at32_pcm: preallocate_dma_buffer: " - "area=%p, addr=%p, size=%ld\n", - (void *)dmabuf->area, (void *)dmabuf->addr, size); - - if (!dmabuf->area) - return -ENOMEM; - - dmabuf->bytes = size; - return 0; -} - - - -/*--------------------------------------------------------------------------*\ - * ISR -\*--------------------------------------------------------------------------*/ -static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; - static int count; - - count++; - if (ssc_sr & params->mask->ssc_endbuf) { - pr_warning("at32-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? - "underrun" : "overrun", params->name, ssc_sr, count); - - /* re-start the PDC */ - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) - prtd->period_ptr = prtd->dma_buffer; - - - ssc_writex(params->ssc->regs, params->pdc->xpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_enable); - } - - - if (ssc_sr & params->mask->ssc_endx) { - /* Load the PDC next pointer and counter registers */ - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) - prtd->period_ptr = prtd->dma_buffer; - ssc_writex(params->ssc->regs, params->pdc->xnpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - } - - - snd_pcm_period_elapsed(substream); -} - - - -/*--------------------------------------------------------------------------*\ - * PCM operations -\*--------------------------------------------------------------------------*/ -static int at32_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - - /* this may get called several times by oss emulation - * with different params - */ - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = params_buffer_bytes(params); - - prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at32_pcm_dma_irq; - - prtd->dma_buffer = runtime->dma_addr; - prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; - prtd->period_size = params_period_bytes(params); - - pr_debug("hw_params: DMA for %s initialized " - "(dma_bytes=%ld, period_size=%ld)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - - return 0; -} - - - -static int at32_pcm_hw_free(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - - if (params != NULL) { - ssc_writex(params->ssc->regs, SSC_PDC_PTCR, - params->mask->pdc_disable); - prtd->params->dma_intr_handler = NULL; - } - - return 0; -} - - - -static int at32_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - - ssc_writex(params->ssc->regs, SSC_IDR, - params->mask->ssc_endx | params->mask->ssc_endbuf); - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - - return 0; -} - - -static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) -{ - struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; - int ret = 0; - - pr_debug("at32_pcm_trigger: buffer_size = %ld, " - "dma_area = %p, dma_bytes = %ld\n", - rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - prtd->period_ptr = prtd->dma_buffer; - - ssc_writex(params->ssc->regs, params->pdc->xpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - prtd->period_ptr += prtd->period_size; - ssc_writex(params->ssc->regs, params->pdc->xnpr, - prtd->period_ptr); - ssc_writex(params->ssc->regs, params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - - pr_debug("trigger: period_ptr=%lx, xpr=%x, " - "xcr=%d, xnpr=%x, xncr=%d\n", - (unsigned long)prtd->period_ptr, - ssc_readx(params->ssc->regs, params->pdc->xpr), - ssc_readx(params->ssc->regs, params->pdc->xcr), - ssc_readx(params->ssc->regs, params->pdc->xnpr), - ssc_readx(params->ssc->regs, params->pdc->xncr)); - - ssc_writex(params->ssc->regs, SSC_IER, - params->mask->ssc_endx | params->mask->ssc_endbuf); - ssc_writex(params->ssc->regs, SSC_PDC_PTCR, - params->mask->pdc_enable); - - pr_debug("sr=%x, imr=%x\n", - ssc_readx(params->ssc->regs, SSC_SR), - ssc_readx(params->ssc->regs, SSC_IER)); - break; /* SNDRV_PCM_TRIGGER_START */ - - - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - break; - - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_enable); - break; - - default: - ret = -EINVAL; - } - - return ret; -} - - - -static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; - dma_addr_t ptr; - snd_pcm_uframes_t x; - - ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); - x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); - - if (x == runtime->buffer_size) - x = 0; - - return x; -} - - - -static int at32_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &at32_pcm_hardware); - - /* ensure that buffer size is a multiple of period size */ - ret = snd_pcm_hw_constraint_integer(runtime, - SNDRV_PCM_HW_PARAM_PERIODS); - if (ret < 0) - goto out; - - prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); - if (prtd == NULL) { - ret = -ENOMEM; - goto out; - } - runtime->private_data = prtd; - - -out: - return ret; -} - - - -static int at32_pcm_close(struct snd_pcm_substream *substream) -{ - struct at32_runtime_data *prtd = substream->runtime->private_data; - - kfree(prtd); - return 0; -} - - -static int at32_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - return remap_pfn_range(vma, vma->vm_start, - substream->dma_buffer.addr >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot); -} - - - -static struct snd_pcm_ops at32_pcm_ops = { - .open = at32_pcm_open, - .close = at32_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at32_pcm_hw_params, - .hw_free = at32_pcm_hw_free, - .prepare = at32_pcm_prepare, - .trigger = at32_pcm_trigger, - .pointer = at32_pcm_pointer, - .mmap = at32_pcm_mmap, -}; - - - -/*--------------------------------------------------------------------------*\ - * ASoC platform driver -\*--------------------------------------------------------------------------*/ -static u64 at32_pcm_dmamask = 0xffffffff; - -static int at32_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, - struct snd_pcm *pcm) -{ - int ret = 0; - - if (!card->dev->dma_mask) - card->dev->dma_mask = &at32_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->playback.channels_min) { - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->capture.channels_min) { - pr_debug("at32-pcm: Allocating PCM capture DMA buffer\n"); - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - - -out: - return ret; -} - - - -static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (substream == NULL) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - dma_free_coherent(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - - - -#ifdef CONFIG_PM -static int at32_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; - - if (runtime == NULL) - return 0; - prtd = runtime->private_data; - params = prtd->params; - - /* Disable the PDC and save the PDC registers */ - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); - - prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); - prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); - prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); - prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); - - return 0; -} - - - -static int at32_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; - - if (runtime == NULL) - return 0; - prtd = runtime->private_data; - params = prtd->params; - - /* Restore the PDC registers and enable the PDC */ - ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); - ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); - ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); - ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); - - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable); - return 0; -} -#else /* CONFIG_PM */ -# define at32_pcm_suspend NULL -# define at32_pcm_resume NULL -#endif /* CONFIG_PM */ - - - -struct snd_soc_platform at32_soc_platform = { - .name = "at32-audio", - .pcm_ops = &at32_pcm_ops, - .pcm_new = at32_pcm_new, - .pcm_free = at32_pcm_free_dma_buffers, - .suspend = at32_pcm_suspend, - .resume = at32_pcm_resume, -}; -EXPORT_SYMBOL_GPL(at32_soc_platform); - - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("Atmel AT32 PCM module"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-pcm.h b/sound/soc/at32/at32-pcm.h deleted file mode 100644 index 2a52430..0000000 --- a/sound/soc/at32/at32-pcm.h +++ /dev/null @@ -1,79 +0,0 @@ -/* sound/soc/at32/at32-pcm.h - * ASoC PCM interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_PCM_H -#define __SOUND_SOC_AT32_AT32_PCM_H __FILE__ - -#include <linux/atmel-ssc.h> - - -/* - * Registers and status bits that are required by the PCM driver - * TODO: Is ptcr really used? - */ -struct at32_pdc_regs { - u32 xpr; /* PDC RX/TX pointer */ - u32 xcr; /* PDC RX/TX counter */ - u32 xnpr; /* PDC next RX/TX pointer */ - u32 xncr; /* PDC next RX/TX counter */ - u32 ptcr; /* PDC transfer control */ -}; - - - -/* - * SSC mask info - */ -struct at32_ssc_mask { - u32 ssc_enable; /* SSC RX/TX enable */ - u32 ssc_disable; /* SSC RX/TX disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFF or RXBUFF */ - u32 pdc_enable; /* PDC RX/TX enable */ - u32 pdc_disable; /* PDC RX/TX disable */ -}; - - - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at32_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - struct ssc_device *ssc; /* SSC device for stream */ - struct at32_pdc_regs *pdc; /* PDC register info */ - struct at32_ssc_mask *mask; /* SSC mask info */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler) (u32, struct snd_pcm_substream *); -}; - - - -/* - * The AT32 ASoC platform driver - */ -extern struct snd_soc_platform at32_soc_platform; - - - -/* - * SSC register access (since ssc_writel() / ssc_readl() require literal name) - */ -#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) -#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) - -#endif /* __SOUND_SOC_AT32_AT32_PCM_H */ diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c deleted file mode 100644 index 4ef6492..0000000 --- a/sound/soc/at32/at32-ssc.c +++ /dev/null @@ -1,849 +0,0 @@ -/* sound/soc/at32/at32-ssc.c - * ASoC platform driver for AT32 using SSC as DAI - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-ssc.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -/* #define DEBUG */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/atmel_pdc.h> -#include <linux/atmel-ssc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include "at32-pcm.h" -#include "at32-ssc.h" - - - -/*-------------------------------------------------------------------------*\ - * Constants -\*-------------------------------------------------------------------------*/ -#define NUM_SSC_DEVICES 3 - -/* - * SSC direction masks - */ -#define SSC_DIR_MASK_UNUSED 0 -#define SSC_DIR_MASK_PLAYBACK 1 -#define SSC_DIR_MASK_CAPTURE 2 - -/* - * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These - * are expected to be used with SSC_BF - */ -/* START bit field values */ -#define SSC_START_CONTINUOUS 0 -#define SSC_START_TX_RX 1 -#define SSC_START_LOW_RF 2 -#define SSC_START_HIGH_RF 3 -#define SSC_START_FALLING_RF 4 -#define SSC_START_RISING_RF 5 -#define SSC_START_LEVEL_RF 6 -#define SSC_START_EDGE_RF 7 -#define SSS_START_COMPARE_0 8 - -/* CKI bit field values */ -#define SSC_CKI_FALLING 0 -#define SSC_CKI_RISING 1 - -/* CKO bit field values */ -#define SSC_CKO_NONE 0 -#define SSC_CKO_CONTINUOUS 1 -#define SSC_CKO_TRANSFER 2 - -/* CKS bit field values */ -#define SSC_CKS_DIV 0 -#define SSC_CKS_CLOCK 1 -#define SSC_CKS_PIN 2 - -/* FSEDGE bit field values */ -#define SSC_FSEDGE_POSITIVE 0 -#define SSC_FSEDGE_NEGATIVE 1 - -/* FSOS bit field values */ -#define SSC_FSOS_NONE 0 -#define SSC_FSOS_NEGATIVE 1 -#define SSC_FSOS_POSITIVE 2 -#define SSC_FSOS_LOW 3 -#define SSC_FSOS_HIGH 4 -#define SSC_FSOS_TOGGLE 5 - -#define START_DELAY 1 - - - -/*-------------------------------------------------------------------------*\ - * Module data -\*-------------------------------------------------------------------------*/ -/* - * SSC PDC registered required by the PCM DMA engine - */ -static struct at32_pdc_regs pdc_tx_reg = { - .xpr = SSC_PDC_TPR, - .xcr = SSC_PDC_TCR, - .xnpr = SSC_PDC_TNPR, - .xncr = SSC_PDC_TNCR, -}; - - - -static struct at32_pdc_regs pdc_rx_reg = { - .xpr = SSC_PDC_RPR, - .xcr = SSC_PDC_RCR, - .xnpr = SSC_PDC_RNPR, - .xncr = SSC_PDC_RNCR, -}; - - - -/* - * SSC and PDC status bits for transmit and receive - */ -static struct at32_ssc_mask ssc_tx_mask = { - .ssc_enable = SSC_BIT(CR_TXEN), - .ssc_disable = SSC_BIT(CR_TXDIS), - .ssc_endx = SSC_BIT(SR_ENDTX), - .ssc_endbuf = SSC_BIT(SR_TXBUFE), - .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS), -}; - - - -static struct at32_ssc_mask ssc_rx_mask = { - .ssc_enable = SSC_BIT(CR_RXEN), - .ssc_disable = SSC_BIT(CR_RXDIS), - .ssc_endx = SSC_BIT(SR_ENDRX), - .ssc_endbuf = SSC_BIT(SR_RXBUFF), - .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS), -}; - - - -/* - * DMA parameters for each SSC - */ -static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - { - { - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, -}; - - - -static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, -}; - - - - -/*-------------------------------------------------------------------------*\ - * ISR -\*-------------------------------------------------------------------------*/ -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt - * handler in the PCM driver. - */ -static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id) -{ - struct at32_ssc_info *ssc_p = dev_id; - struct at32_pcm_dma_params *dma_params; - u32 ssc_sr; - u32 ssc_substream_mask; - int i; - - ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) & - ssc_readl(ssc_p->ssc->regs, IMR)); - - /* - * Loop through substreams attached to this SSC. If a DMA-related - * interrupt occured on that substream, call the DMA interrupt - * handler function, if one has been registered in the dma_param - * structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if ((dma_params != NULL) && - (dma_params->dma_intr_handler != NULL)) { - ssc_substream_mask = (dma_params->mask->ssc_endx | - dma_params->mask->ssc_endbuf); - if (ssc_sr & ssc_substream_mask) { - dma_params->dma_intr_handler(ssc_sr, - dma_params-> - substream); - } - } - } - - - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*\ - * DAI functions -\*-------------------------------------------------------------------------*/ -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at32_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - - - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at32_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - int dir_mask; - - dma_params = ssc_p->dma_params[substream->stream]; - - if (dma_params != NULL) { - ssc_writel(dma_params->ssc->regs, CR, - dma_params->mask->ssc_disable); - pr_debug("%s disabled SSC_SR=0x%08x\n", - (substream->stream ? "receiver" : "transmit"), - ssc_readl(ssc_p->ssc->regs, SR)); - - dma_params->ssc = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[substream->stream] = NULL; - } - - - dir_mask = 1 << substream->stream; - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock */ - pr_debug("at32-ssc: Stopping user %d clock\n", - ssc_p->ssc->user); - clk_disable(ssc_p->ssc->clk); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc->irq, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - /* clear the SSC dividers */ - ssc_p->cmr_div = 0; - ssc_p->tcmr_period = 0; - ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - - - -/* - * Set the SSC system clock rate - */ -static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* TODO: What the heck do I do here? */ - return 0; -} - - - -/* - * Record DAI format for use by hw_params() - */ -static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - - - -/* - * Record SSC clock dividers for use in hw_params() - */ -static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT32_SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT32_SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT32_SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - - - -/* - * Configure the SSC - */ -static int at32_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at32_ssc_info *ssc_p = &ssc_info[id]; - struct at32_pcm_dma_params *dma_params; - int channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - - /* - * Currently, there is only one set of dma_params for each direction. - * If more are added, this code will have to be changed to select - * the proper set - */ - dma_params = &ssc_dma_params[id][substream->stream]; - dma_params->ssc = ssc_p->ssc; - dma_params->substream = substream; - - ssc_p->dma_params[substream->stream] = dma_params; - - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the PCM driver's hw_params() - * function. It should not be used for other purposes as it - * is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - - /* - * Determine sample size in bits and the PDC increment - */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - - case SNDRV_PCM_FORMAT_S16: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - - case SNDRV_PCM_FORMAT_S24: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - - case SNDRV_PCM_FORMAT_S32: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - - default: - pr_warning("at32-ssc: Unsupported PCM format %d", - params_format(params)); - return -EINVAL; - } - pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n", - bits, dma_params->pdc_xfer_size, channels); - - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) - if (bits > 16) { - pr_warning("at32-ssc: " - "sample size %d is too large for I2S\n", - bits); - return -EINVAL; - } - - - /* - * Compute the SSC register settings - */ - switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | - SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRS clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, SSC_START_FALLING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(RFMR_FSLEN, bits - 1) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, SSC_START_FALLING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(TFMR_FSLEN, bits - 1) | - SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) | - SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clock. - * - * The SSC transmit clock is obtained from the BCLK signal - * on the TK line, and the SSC receive clock is generated from - * the transmit clock. - * - * For single channel data, one sample is transferred on the - * falling edge of the LRC clock. For two channel data, one - * sample is transferred on both edges of the LRC clock. - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n"); - start_event = ((channels == 1) ? - SSC_START_FALLING_RF : SSC_START_EDGE_RF); - - rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, start_event) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_CLOCK)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, start_event) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_NONE) | - SSC_BF(TCMR_CKS, SSC_CKS_PIN)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, 1) | - SSC_BF(RCMR_START, SSC_START_RISING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, 1) | - SSC_BF(TCMR_START, SSC_START_RISING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_RISING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(TFMR_DATNB, channels - 1) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - pr_warning("at32-ssc: unsupported DAI format 0x%x\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", - rcmr, rfmr, tcmr, tfmr); - - - if (!ssc_p->initialized) { - /* enable peripheral clock */ - pr_debug("at32-ssc: Starting clock\n"); - clk_enable(ssc_p->ssc->clk); - - /* Reset the SSC and its PDC registers */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); - - ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); - - ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0, - ssc_p->name, ssc_p); - if (ret < 0) { - pr_warning("at32-ssc: request irq failed (%d)\n", ret); - pr_debug("at32-ssc: Stopping clock\n"); - clk_disable(ssc_p->ssc->clk); - return ret; - } - - ssc_p->initialized = 1; - } - - /* Set SSC clock mode register */ - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); - - /* set transmit clock mode and format */ - ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); - ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); - - pr_debug("at32-ssc: SSC initialized\n"); - return 0; -} - - - -static int at32_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - - dma_params = ssc_p->dma_params[substream->stream]; - - ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable); - - return 0; -} - - - -#ifdef CONFIG_PM -static int at32_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive */ - ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); - - /* Save the current interrupt mask, then disable unmasked interrupts */ - ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); - ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); - ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); - ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); - ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); - ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); - - return 0; -} - - - -static int at32_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - u32 cr; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* restore SSC register settings */ - ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); - ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); - ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); - - /* re-enable interrupts */ - ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); - - /* Re-enable recieve and transmit as appropriate */ - cr = 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; - ssc_writel(ssc_p->ssc->regs, CR, cr); - - return 0; -} -#else /* CONFIG_PM */ -# define at32_ssc_suspend NULL -# define at32_ssc_resume NULL -#endif /* CONFIG_PM */ - - -#define AT32_SSC_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - - -#define AT32_SSC_FORMATS \ - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \ - SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32) - - -struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = { - { - .name = "at32-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[0], - }, - { - .name = "at32-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[1], - }, - { - .name = "at32-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[2], - }, -}; -EXPORT_SYMBOL_GPL(at32_ssc_dai); - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("AT32 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-ssc.h b/sound/soc/at32/at32-ssc.h deleted file mode 100644 index 3c052db..0000000 --- a/sound/soc/at32/at32-ssc.h +++ /dev/null @@ -1,59 +0,0 @@ -/* sound/soc/at32/at32-ssc.h - * ASoC SSC interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_SSC_H -#define __SOUND_SOC_AT32_AT32_SSC_H __FILE__ - -#include <linux/types.h> -#include <linux/atmel-ssc.h> - -#include "at32-pcm.h" - - - -struct at32_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - - - -struct at32_ssc_info { - char *name; - struct ssc_device *ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* true if SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at32_pcm_dma_params *dma_params[2]; - struct at32_ssc_state ssc_state; -}; - - -/* SSC divider ids */ -#define AT32_SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT32_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT32_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - - -extern struct snd_soc_dai at32_ssc_dai[]; - - - -#endif /* __SOUND_SOC_AT32_AT32_SSC_H */ diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/at32/playpaq_wm8510.c deleted file mode 100644 index 7e6560b..0000000 --- a/sound/soc/at32/playpaq_wm8510.c +++ /dev/null @@ -1,523 +0,0 @@ -/* sound/soc/at32/playpaq_wm8510.c - * ASoC machine driver for PlayPaq using WM8510 codec - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum(a)acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c - * - * NOTE: If you don't have the AT32 enhanced portmux configured (which - * isn't currently in the mainline or Atmel patched kernel), you will - * need to set the MCLK pin (PA30) to peripheral A in your board initialization - * code. Something like: - * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); - * - */ - -/* #define DEBUG */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/version.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> -#include <sound/soc-dapm.h> - -#include <mach/at32ap700x.h> -#include <mach/portmux.h> - -#include "../codecs/wm8510.h" -#include "at32-pcm.h" -#include "at32-ssc.h" - - -/*-------------------------------------------------------------------------*\ - * constants -\*-------------------------------------------------------------------------*/ -#define MCLK_PIN GPIO_PIN_PA(30) -#define MCLK_PERIPH GPIO_PERIPH_A - - -/*-------------------------------------------------------------------------*\ - * data types -\*-------------------------------------------------------------------------*/ -/* SSC clocking data */ -struct ssc_clock_data { - /* CMR div */ - unsigned int cmr_div; - - /* Frame period (as needed by xCMR.PERIOD) */ - unsigned int period; - - /* The SSC clock rate these settings where calculated for */ - unsigned long ssc_rate; -}; - - -/*-------------------------------------------------------------------------*\ - * module data -\*-------------------------------------------------------------------------*/ -static struct clk *_gclk0; -static struct clk *_pll0; - -#define CODEC_CLK (_gclk0) - - -/*-------------------------------------------------------------------------*\ - * Sound SOC operations -\*-------------------------------------------------------------------------*/ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE -static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( - struct snd_pcm_hw_params *params, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p = cpu_dai->private_data; - struct ssc_device *ssc = ssc_p->ssc; - struct ssc_clock_data cd; - unsigned int rate, width_bits, channels; - unsigned int bitrate, ssc_div; - unsigned actual_rate; - - - /* - * Figure out required bitrate - */ - rate = params_rate(params); - channels = params_channels(params); - width_bits = snd_pcm_format_physical_width(params_format(params)); - bitrate = rate * width_bits * channels; - - - /* - * Figure out required SSC divider and period for required bitrate - */ - cd.ssc_rate = clk_get_rate(ssc->clk); - ssc_div = cd.ssc_rate / bitrate; - cd.cmr_div = ssc_div / 2; - if (ssc_div & 1) { - /* round cmr_div up */ - cd.cmr_div++; - } - cd.period = width_bits - 1; - - - /* - * Find actual rate, compare to requested rate - */ - actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); - pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", - rate, actual_rate); - - - return cd; -} -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - -static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - struct at32_ssc_info *ssc_p = cpu_dai->private_data; - struct ssc_device *ssc = ssc_p->ssc; - unsigned int pll_out = 0, bclk = 0, mclk_div = 0; - int ret; - - - /* Due to difficulties with getting the correct clocks from the AT32's - * PLL0, we're going to let the CODEC be in charge of all the clocks - */ -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM); -#else - struct ssc_clock_data cd; - const unsigned int fmt = (SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); -#endif - - if (ssc == NULL) { - pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); - return -EINVAL; - } - - - /* - * Figure out PLL and BCLK dividers for WM8510 - */ - switch (params_rate(params)) { - case 48000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_1; - bclk = WM8510_BCLKDIV_8; - break; - - case 44100: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_1; - bclk = WM8510_BCLKDIV_8; - break; - - case 22050: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_2; - bclk = WM8510_BCLKDIV_8; - break; - - case 16000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_3; - bclk = WM8510_BCLKDIV_8; - break; - - case 11025: - pll_out = 11289600; - mclk_div = WM8510_MCLKDIV_4; - bclk = WM8510_BCLKDIV_8; - break; - - case 8000: - pll_out = 12288000; - mclk_div = WM8510_MCLKDIV_6; - bclk = WM8510_BCLKDIV_8; - break; - - default: - pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", - params_rate(params)); - return -EINVAL; - } - - - /* - * set CPU and CODEC DAI configuration - */ - ret = snd_soc_dai_set_fmt(codec_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CODEC DAI format (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_fmt(cpu_dai, fmt); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU DAI format (%d)\n", - ret); - return ret; - } - - - /* - * Set CPU clock configuration - */ -#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); - pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", - cd.cmr_div, cd.period); - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", - ret); - return ret; - } - ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, - cd.period); - if (ret < 0) { - pr_warning("playpaq_wm8510: " - "Failed to set CPU transmit period (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - /* - * Set CODEC clock configuration - */ - pr_debug("playpaq_wm8510: " - "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", - clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); - - -#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); - if (ret < 0) { - pr_warning - ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", - ret); - return ret; - } -#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ - - - ret = snd_soc_dai_set_pll(codec_dai, 0, - clk_get_rate(CODEC_CLK), pll_out); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", - ret); - return ret; - } - - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); - if (ret < 0) { - pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", - ret); - return ret; - } - - - return 0; -} - - - -static struct snd_soc_ops playpaq_wm8510_ops = { - .hw_params = playpaq_wm8510_hw_params, -}; - - - -static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { - SND_SOC_DAPM_MIC("Int Mic", NULL), - SND_SOC_DAPM_SPK("Ext Spk", NULL), -}; - - - -static const char *intercon[][3] = { - /* speaker connected to SPKOUT */ - {"Ext Spk", NULL, "SPKOUTP"}, - {"Ext Spk", NULL, "SPKOUTN"}, - - {"Mic Bias", NULL, "Int Mic"}, - {"MICN", NULL, "Mic Bias"}, - {"MICP", NULL, "Mic Bias"}, - - /* Terminator */ - {NULL, NULL, NULL}, -}; - - - -static int playpaq_wm8510_init(struct snd_soc_codec *codec) -{ - int i; - - /* - * Add DAPM widgets - */ - for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); - - - - /* - * Setup audio path interconnects - */ - for (i = 0; intercon[i][0] != NULL; i++) { - snd_soc_dapm_connect_input(codec, - intercon[i][0], - intercon[i][1], intercon[i][2]); - } - - - /* always connected pins */ - snd_soc_dapm_enable_pin(codec, "Int Mic"); - snd_soc_dapm_enable_pin(codec, "Ext Spk"); - snd_soc_dapm_sync(codec); - - - - /* Make CSB show PLL rate */ - snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, - WM8510_OPCLKDIV_1 | 4); - - return 0; -} - - - -static struct snd_soc_dai_link playpaq_wm8510_dai = { - .name = "WM8510", - .stream_name = "WM8510 PCM", - .cpu_dai = &at32_ssc_dai[0], - .codec_dai = &wm8510_dai, - .init = playpaq_wm8510_init, - .ops = &playpaq_wm8510_ops, -}; - - - -static struct snd_soc_machine snd_soc_machine_playpaq = { - .name = "LRS_PlayPaq_WM8510", - .dai_link = &playpaq_wm8510_dai, - .num_links = 1, -}; - - - -static struct wm8510_setup_data playpaq_wm8510_setup = { - .i2c_bus = 0, - .i2c_address = 0x1a, -}; - - - -static struct snd_soc_device playpaq_wm8510_snd_devdata = { - .machine = &snd_soc_machine_playpaq, - .platform = &at32_soc_platform, - .codec_dev = &soc_codec_dev_wm8510, - .codec_data = &playpaq_wm8510_setup, -}; - -static struct platform_device *playpaq_snd_device; - - -static int __init playpaq_asoc_init(void) -{ - int ret = 0; - struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; - struct ssc_device *ssc = NULL; - - - /* - * Request SSC device - */ - ssc = ssc_request(0); - if (IS_ERR(ssc)) { - ret = PTR_ERR(ssc); - ssc = NULL; - goto err_ssc; - } - ssc_p->ssc = ssc; - - - /* - * Configure MCLK for WM8510 - */ - _gclk0 = clk_get(NULL, "gclk0"); - if (IS_ERR(_gclk0)) { - _gclk0 = NULL; - goto err_gclk0; - } - _pll0 = clk_get(NULL, "pll0"); - if (IS_ERR(_pll0)) { - _pll0 = NULL; - goto err_pll0; - } - if (clk_set_parent(_gclk0, _pll0)) { - pr_warning("snd-soc-playpaq: " - "Failed to set PLL0 as parent for DAC clock\n"); - goto err_set_clk; - } - clk_set_rate(CODEC_CLK, 12000000); - clk_enable(CODEC_CLK); - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); -#endif - - - /* - * Create and register platform device - */ - playpaq_snd_device = platform_device_alloc("soc-audio", 0); - if (playpaq_snd_device == NULL) { - ret = -ENOMEM; - goto err_device_alloc; - } - - platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); - playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; - - ret = platform_device_add(playpaq_snd_device); - if (ret) { - pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", - ret); - goto err_device_add; - } - - return 0; - - -err_device_add: - if (playpaq_snd_device != NULL) { - platform_device_put(playpaq_snd_device); - playpaq_snd_device = NULL; - } -err_device_alloc: -err_set_clk: - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } -err_pll0: - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } -err_gclk0: - if (ssc != NULL) { - ssc_free(ssc); - ssc = NULL; - } -err_ssc: - return ret; -} - - -static void __exit playpaq_asoc_exit(void) -{ - struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; - struct ssc_device *ssc; - - if (ssc_p != NULL) { - ssc = ssc_p->ssc; - if (ssc != NULL) - ssc_free(ssc); - ssc_p->ssc = NULL; - } - - if (_gclk0 != NULL) { - clk_put(_gclk0); - _gclk0 = NULL; - } - if (_pll0 != NULL) { - clk_put(_pll0); - _pll0 = NULL; - } - -#if defined CONFIG_AT32_ENHANCED_PORTMUX - at32_free_pin(MCLK_PIN); -#endif - - platform_device_unregister(playpaq_snd_device); - playpaq_snd_device = NULL; -} - -module_init(playpaq_asoc_init); -module_exit(playpaq_asoc_exit); - -MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); -MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/Kconfig b/sound/soc/at91/Kconfig deleted file mode 100644 index 85a8832..0000000 --- a/sound/soc/at91/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config SND_AT91_SOC - tristate "SoC Audio for the Atmel AT91 System-on-Chip" - depends on ARCH_AT91 - help - Say Y or M if you want to add support for codecs attached to - the AT91 SSC interface. You will also need - to select the audio interfaces to support below. - -config SND_AT91_SOC_SSC - tristate diff --git a/sound/soc/at91/Makefile b/sound/soc/at91/Makefile deleted file mode 100644 index b817f11..0000000 --- a/sound/soc/at91/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# AT91 Platform Support -snd-soc-at91-objs := at91-pcm.o -snd-soc-at91-ssc-objs := at91-ssc.o - -obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o -obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c deleted file mode 100644 index 7ab48bd..0000000 --- a/sound/soc/at91/at91-pcm.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * at91-pcm.c -- ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.c by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" - -#if 0 -#define DBG(x...) printk(KERN_INFO "at91-pcm: " x) -#else -#define DBG(x...) -#endif - -static const struct snd_pcm_hardware at91_pcm_hardware = { - .info = SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .period_bytes_min = 32, - .period_bytes_max = 8192, - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, -}; - -struct at91_runtime_data { - struct at91_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of dma buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ - size_t period_size; - dma_addr_t period_ptr; /* physical address of next period */ - u32 pdc_xpr_save; /* PDC register save */ - u32 pdc_xcr_save; - u32 pdc_xnpr_save; - u32 pdc_xncr_save; -}; - -static void at91_pcm_dma_irq(u32 ssc_sr, - struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - static int count = 0; - - count++; - - if (ssc_sr & params->mask->ssc_endbuf) { - - printk(KERN_WARNING - "at91-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK - ? "underrun" : "overrun", - params->name, ssc_sr, count); - - /* re-start the PDC */ - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - } - - if (ssc_sr & params->mask->ssc_endx) { - - /* Load the PDC next pointer and counter registers */ - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - at91_ssc_write(params->ssc_base + params->pdc->xnpr, - prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - } - - snd_pcm_period_elapsed(substream); -} - -static int at91_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - - /* this may get called several times by oss emulation - * with different params */ - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = params_buffer_bytes(params); - - prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at91_pcm_dma_irq; - - prtd->dma_buffer = runtime->dma_addr; - prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; - prtd->period_size = params_period_bytes(params); - - DBG("hw_params: DMA for %s initialized (dma_bytes=%d, period_size=%d)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - return 0; -} - -static int at91_pcm_hw_free(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - if (params != NULL) { - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - prtd->params->dma_intr_handler = NULL; - } - - return 0; -} - -static int at91_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - at91_ssc_write(params->ssc_base + AT91_SSC_IDR, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - return 0; -} - -static int at91_pcm_trigger(struct snd_pcm_substream *substream, - int cmd) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - int ret = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - prtd->period_ptr = prtd->dma_buffer; - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - prtd->period_ptr += prtd->period_size; - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - - DBG("trigger: period_ptr=%lx, xpr=%lx, xcr=%ld, xnpr=%lx, xncr=%ld\n", - (unsigned long) prtd->period_ptr, - at91_ssc_read(params->ssc_base + params->pdc->xpr), - at91_ssc_read(params->ssc_base + params->pdc->xcr), - at91_ssc_read(params->ssc_base + params->pdc->xnpr), - at91_ssc_read(params->ssc_base + params->pdc->xncr)); - - at91_ssc_write(params->ssc_base + AT91_SSC_IER, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, - params->mask->pdc_enable); - - DBG("sr=%lx imr=%lx\n", - at91_ssc_read(params->ssc_base + AT91_SSC_SR), - at91_ssc_read(params->ssc_base + AT91_SSC_IMR)); - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - break; - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - break; - - default: - ret = -EINVAL; - } - - return ret; -} - -static snd_pcm_uframes_t at91_pcm_pointer( - struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - dma_addr_t ptr; - snd_pcm_uframes_t x; - - ptr = (dma_addr_t) at91_ssc_read(params->ssc_base + params->pdc->xpr); - x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); - - if (x == runtime->buffer_size) - x = 0; - return x; -} - -static int at91_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &at91_pcm_hardware); - - /* ensure that buffer size is a multiple of period size */ - ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); - if (ret < 0) - goto out; - - prtd = kzalloc(sizeof(struct at91_runtime_data), GFP_KERNEL); - if (prtd == NULL) { - ret = -ENOMEM; - goto out; - } - runtime->private_data = prtd; - - out: - return ret; -} - -static int at91_pcm_close(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - - kfree(prtd); - return 0; -} - -static int at91_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - - return dma_mmap_writecombine(substream->pcm->card->dev, vma, - runtime->dma_area, - runtime->dma_addr, - runtime->dma_bytes); -} - -struct snd_pcm_ops at91_pcm_ops = { - .open = at91_pcm_open, - .close = at91_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at91_pcm_hw_params, - .hw_free = at91_pcm_hw_free, - .prepare = at91_pcm_prepare, - .trigger = at91_pcm_trigger, - .pointer = at91_pcm_pointer, - .mmap = at91_pcm_mmap, -}; - -static int at91_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, - int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *buf = &substream->dma_buffer; - size_t size = at91_pcm_hardware.buffer_bytes_max; - - buf->dev.type = SNDRV_DMA_TYPE_DEV; - buf->dev.dev = pcm->card->dev; - buf->private_data = NULL; - buf->area = dma_alloc_writecombine(pcm->card->dev, size, - &buf->addr, GFP_KERNEL); - - DBG("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", - (void *) buf->area, - (void *) buf->addr, - size); - - if (!buf->area) - return -ENOMEM; - - buf->bytes = size; - return 0; -} - -static u64 at91_pcm_dmamask = 0xffffffff; - -static int at91_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, struct snd_pcm *pcm) -{ - int ret = 0; - - if (!card->dev->dma_mask) - card->dev->dma_mask = &at91_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->playback.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->capture.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - out: - return ret; -} - -static void at91_pcm_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (!substream) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - - dma_free_writecombine(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - -#ifdef CONFIG_PM -static int at91_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* disable the PDC and save the PDC registers */ - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->pdc_xpr_save = at91_ssc_read(params->ssc_base + params->pdc->xpr); - prtd->pdc_xcr_save = at91_ssc_read(params->ssc_base + params->pdc->xcr); - prtd->pdc_xnpr_save = at91_ssc_read(params->ssc_base + params->pdc->xnpr); - prtd->pdc_xncr_save = at91_ssc_read(params->ssc_base + params->pdc->xncr); - - return 0; -} - -static int at91_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* restore the PDC registers and enable the PDC */ - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->pdc_xpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xcr, prtd->pdc_xcr_save); - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->pdc_xnpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xncr, prtd->pdc_xncr_save); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - return 0; -} -#else -#define at91_pcm_suspend NULL -#define at91_pcm_resume NULL -#endif - -struct snd_soc_platform at91_soc_platform = { - .name = "at91-audio", - .pcm_ops = &at91_pcm_ops, - .pcm_new = at91_pcm_new, - .pcm_free = at91_pcm_free_dma_buffers, - .suspend = at91_pcm_suspend, - .resume = at91_pcm_resume, -}; - -EXPORT_SYMBOL_GPL(at91_soc_platform); - -MODULE_AUTHOR("Frank Mandarino <fmandarino(a)endrelia.com>"); -MODULE_DESCRIPTION("Atmel AT91 PCM module"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h deleted file mode 100644 index e5aada2..0000000 --- a/sound/soc/at91/at91-pcm.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.h by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_PCM_H -#define _AT91_PCM_H - -#include <mach/hardware.h> - -struct at91_ssc_periph { - void __iomem *base; - u32 pid; -}; - -/* - * Registers and status bits that are required by the PCM driver. - */ -struct at91_pdc_regs { - unsigned int xpr; /* PDC recv/trans pointer */ - unsigned int xcr; /* PDC recv/trans counter */ - unsigned int xnpr; /* PDC next recv/trans pointer */ - unsigned int xncr; /* PDC next recv/trans counter */ - unsigned int ptcr; /* PDC transfer control */ -}; - -struct at91_ssc_mask { - u32 ssc_enable; /* SSC recv/trans enable */ - u32 ssc_disable; /* SSC recv/trans disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ - u32 pdc_enable; /* PDC recv/trans enable */ - u32 pdc_disable; /* PDC recv/trans disable */ -}; - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at91_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - void __iomem *ssc_base; /* SSC base address */ - struct at91_pdc_regs *pdc; /* PDC receive or transmit registers */ - struct at91_ssc_mask *mask;/* SSC & PDC status bits */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler)(u32, struct snd_pcm_substream *); -}; - -extern struct snd_soc_platform at91_soc_platform; - -#define at91_ssc_read(a) ((unsigned long) __raw_readl(a)) -#define at91_ssc_write(a,v) __raw_writel((v),(a)) - -#endif /* _AT91_PCM_H */ diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c deleted file mode 100644 index a5b1a79..0000000 --- a/sound/soc/at91/at91-ssc.c +++ /dev/null @@ -1,791 +0,0 @@ -/* - * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * - * Based on pxa2xx Platform drivers by - * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_pmc.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" -#include "at91-ssc.h" - -#if 0 -#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x) -#else -#define DBG(x...) -#endif - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#define NUM_SSC_DEVICES 1 -#else -#define NUM_SSC_DEVICES 3 -#endif - - -/* - * SSC PDC registers required by the PCM DMA engine. - */ -static struct at91_pdc_regs pdc_tx_reg = { - .xpr = ATMEL_PDC_TPR, - .xcr = ATMEL_PDC_TCR, - .xnpr = ATMEL_PDC_TNPR, - .xncr = ATMEL_PDC_TNCR, -}; - -static struct at91_pdc_regs pdc_rx_reg = { - .xpr = ATMEL_PDC_RPR, - .xcr = ATMEL_PDC_RCR, - .xnpr = ATMEL_PDC_RNPR, - .xncr = ATMEL_PDC_RNCR, -}; - -/* - * SSC & PDC status bits for transmit and receive. - */ -static struct at91_ssc_mask ssc_tx_mask = { - .ssc_enable = AT91_SSC_TXEN, - .ssc_disable = AT91_SSC_TXDIS, - .ssc_endx = AT91_SSC_ENDTX, - .ssc_endbuf = AT91_SSC_TXBUFE, - .pdc_enable = ATMEL_PDC_TXTEN, - .pdc_disable = ATMEL_PDC_TXTDIS, -}; - -static struct at91_ssc_mask ssc_rx_mask = { - .ssc_enable = AT91_SSC_RXEN, - .ssc_disable = AT91_SSC_RXDIS, - .ssc_endx = AT91_SSC_ENDRX, - .ssc_endbuf = AT91_SSC_RXBUFF, - .pdc_enable = ATMEL_PDC_RXTEN, - .pdc_disable = ATMEL_PDC_RXTDIS, -}; - - -/* - * DMA parameters. - */ -static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - {{ - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#if NUM_SSC_DEVICES == 3 - {{ - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, - {{ - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#endif -}; - -struct at91_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - -static struct at91_ssc_info { - char *name; - struct at91_ssc_periph ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* 1=SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at91_pcm_dma_params *dma_params[2]; - struct at91_ssc_state ssc_state; - -} ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = 0, - .initialized = 0, - }, -#if NUM_SSC_DEVICES == 3 - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = 0, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = 0, - .initialized = 0, - }, -#endif -}; - -static unsigned int at91_ssc_sysclk; - -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA - * interrupt handler in the PCM driver. - */ -static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id) -{ - struct at91_ssc_info *ssc_p = dev_id; - struct at91_pcm_dma_params *dma_params; - u32 ssc_sr; - int i; - - ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR) - & at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - - /* - * Loop through the substreams attached to this SSC. If - * a DMA-related interrupt occurred on that substream, call - * the DMA interrupt handler function, if one has been - * registered in the dma_params structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if (dma_params != NULL && dma_params->dma_intr_handler != NULL && - (ssc_sr & - (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf))) - - dma_params->dma_intr_handler(ssc_sr, dma_params->substream); - } - - return IRQ_HANDLED; -} - -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at91_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - DBG("ssc_startup: SSC_SR=0x%08lx\n", - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2; - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at91_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir, dir_mask; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - if (dma_params != NULL) { - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_disable); - DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"), - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - - dma_params->ssc_base = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[dir] = NULL; - } - - dir_mask = 1 << dir; - - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock. */ - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc.pid, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - /* Clear the SSC dividers */ - ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - -/* - * Record the SSC system clock rate. - */ -static int at91_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* - * The only clock supplied to the SSC is the AT91 master clock, - * which is only used if the SSC is generating BCLK and/or - * LRC clocks. - */ - switch (clk_id) { - case AT91_SYSCLK_MCK: - at91_ssc_sysclk = freq; - break; - default: - return -EINVAL; - } - - return 0; -} - -/* - * Record the DAI format for use in hw_params(). - */ -static int at91_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - -/* - * Record SSC clock dividers for use in hw_params(). - */ -static int at91_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT91SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value. - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else - if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT91SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT91SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - -/* - * Configure the SSC. - */ -static int at91_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at91_ssc_info *ssc_p = &ssc_info[id]; - struct at91_pcm_dma_params *dma_params; - int dir, channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - /* - * Currently, there is only one set of dma params for - * each direction. If more are added, this code will - * have to be changed to select the proper set. - */ - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - - dma_params = &ssc_dma_params[id][dir]; - dma_params->ssc_base = ssc_p->ssc.base; - dma_params->substream = substream; - - ssc_p->dma_params[dir] = dma_params; - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the pcm driver hw_params() - * function. It should not be used for other purposes - * as it is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - /* - * Determine sample size in bits and the PDC increment. - */ - switch(params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - case SNDRV_PCM_FORMAT_S16_LE: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - case SNDRV_PCM_FORMAT_S24_LE: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - case SNDRV_PCM_FORMAT_S32_LE: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - default: - printk(KERN_WARNING "at91-ssc: unsupported PCM format\n"); - return -EINVAL; - } - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S - && bits > 16) { - printk(KERN_WARNING - "at91-ssc: sample size %d is too large for I2S\n", bits); - return -EINVAL; - } - - /* - * Compute SSC register settings. - */ - switch (ssc_p->daifmt - & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clocks. - * - * The SSC transmit clock is obtained from the BCLK signal on - * on the TK line, and the SSC receive clock is generated from the - * transmit clock. - * - * For single channel data, one sample is transferred on the falling - * edge of the LRC clock. For two channel data, one sample is - * transferred on both edges of the LRC clock. - */ - start_event = channels == 1 - ? AT91_SSC_START_FALLING_RF - : AT91_SSC_START_EDGE_RF; - - rcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_CLOCK ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_PIN ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - - - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr); - - if (!ssc_p->initialized) { - - /* Enable PMC peripheral clock for this SSC */ - DBG("Starting pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid); - - /* Reset the SSC and its PDC registers */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0); - - if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt, - 0, ssc_p->name, ssc_p)) < 0) { - printk(KERN_WARNING "at91-ssc: request_irq failure\n"); - - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - return ret; - } - - ssc_p->initialized = 1; - } - - /* set SSC clock mode register */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, rfmr); - - /* set transmit clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, tfmr); - - DBG("hw_params: SSC initialized\n"); - return 0; -} - - -static int at91_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_enable); - - DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit", - at91_ssc_read(dma_params->ssc_base + AT91_SSC_SR)); - return 0; -} - - -#ifdef CONFIG_PM -static int at91_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive. */ - ssc_p->ssc_state.ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - AT91_SSC_TXDIS | AT91_SSC_RXDIS); - - /* Save the current interrupt mask, then disable unmasked interrupts. */ - ssc_p->ssc_state.ssc_imr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_CMR); - ssc_p->ssc_state.ssc_rcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RCMR); - ssc_p->ssc_state.ssc_rfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RFMR); - ssc_p->ssc_state.ssc_tcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TCMR); - ssc_p->ssc_state.ssc_tfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TFMR); - - return 0; -} - -static int at91_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, ssc_p->ssc_state.ssc_tfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, ssc_p->ssc_state.ssc_tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, ssc_p->ssc_state.ssc_rfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, ssc_p->ssc_state.ssc_rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->ssc_state.ssc_cmr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IER, ssc_p->ssc_state.ssc_imr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_RXENA) ? AT91_SSC_RXEN : 0) | - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_TXENA) ? AT91_SSC_TXEN : 0)); - - return 0; -} - -#else -#define at91_ssc_suspend NULL -#define at91_ssc_resume NULL -#endif - -#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ - SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ - SNDRV_PCM_RATE_96000) - -#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) - -struct snd_soc_dai at91_ssc_dai[NUM_SSC_DEVICES] = { - { .name = "at91-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[0].ssc, - }, -#if NUM_SSC_DEVICES == 3 - { .name = "at91-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[1].ssc, - }, - { .name = "at91-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[2].ssc, - }, -#endif -}; - -EXPORT_SYMBOL_GPL(at91_ssc_dai); - -/* Module information */ -MODULE_AUTHOR("Frank Mandarino, fmandarino(a)endrelia.com, www.endrelia.com"); -MODULE_DESCRIPTION("AT91 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-ssc.h b/sound/soc/at91/at91-ssc.h deleted file mode 100644 index 6b7bf38..0000000 --- a/sound/soc/at91/at91-ssc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * at91-ssc.h - ALSA SSC interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino(a)endrelia.com> - * Endrelia Technologies Inc. - * Created: Jan 9, 2007 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_SSC_H -#define _AT91_SSC_H - -/* SSC system clock ids */ -#define AT91_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ - -/* SSC divider ids */ -#define AT91SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT91SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - -extern struct snd_soc_dai at91_ssc_dai[]; - -#endif /* _AT91_SSC_H */ - -- 1.5.3.7

2 1

[alsa-devel] [PATCH] ASoC: Create a common directory for AVR32 and ARM9 atmel boards.
by Sedji Gaouaou 01 Oct '08

01 Oct '08

Create a common directory for AVR32 and ARM9 atmel boards to unify atmel audio DAI. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/Kconfig | 3 +- sound/soc/Makefile | 2 +- sound/soc/atmel/Kconfig | 43 ++ sound/soc/atmel/Makefile | 15 + sound/soc/atmel/atmel-pcm.c | 484 +++++++++++++++++++++++ sound/soc/atmel/atmel-pcm.h | 86 ++++ sound/soc/atmel/atmel_ssc_dai.c | 803 ++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/atmel_ssc_dai.h | 121 ++++++ sound/soc/atmel/playpaq_wm8510.c | 523 +++++++++++++++++++++++++ sound/soc/atmel/sam9g20_wm8731.c | 329 ++++++++++++++++ 10 files changed, 2406 insertions(+), 3 deletions(-) create mode 100644 sound/soc/atmel/Kconfig create mode 100644 sound/soc/atmel/Makefile create mode 100644 sound/soc/atmel/atmel-pcm.c create mode 100644 sound/soc/atmel/atmel-pcm.h create mode 100644 sound/soc/atmel/atmel_ssc_dai.c create mode 100644 sound/soc/atmel/atmel_ssc_dai.h create mode 100644 sound/soc/atmel/playpaq_wm8510.c create mode 100644 sound/soc/atmel/sam9g20_wm8731.c diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 4dfda66..615ebf0 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -23,8 +23,7 @@ config SND_SOC_AC97_BUS bool # All the supported Soc's -source "sound/soc/at32/Kconfig" -source "sound/soc/at91/Kconfig" +source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index d849349..4d475c3 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,5 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ +obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/ obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/ diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 0000000..170d9da --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,43 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on ARCH_AT91 || AVR32 + help + Say Y or M if you want to add support for codecs attached to + the AT91 SSC interface. You will also need + to select the audio interfaces to support below. + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile new file mode 100644 index 0000000..f54a7cc --- /dev/null +++ b/sound/soc/atmel/Makefile @@ -0,0 +1,15 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-objs := atmel-pcm.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c new file mode 100644 index 0000000..6d317d2 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.c @@ -0,0 +1,484 @@ +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" + + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, +}; + + +/*--------------------------------------------------------------------------*\ + * Data types +\*--------------------------------------------------------------------------*/ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ + + /* PDC register save */ + u32 pdc_xpr_save; + u32 pdc_xcr_save; + u32 pdc_xnpr_save; + u32 pdc_xncr_save; +}; + + +/*--------------------------------------------------------------------------*\ + * Helper functions +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = atmel_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + pr_debug("atmel-pcm:" + "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, + (void *) buf->addr, + size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} +/*--------------------------------------------------------------------------*\ + * ISR +\*--------------------------------------------------------------------------*/ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + static int count = 0; + + count++; + + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warning("atmel-pcm: buffer %s on %s" + " (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + snd_pcm_period_elapsed(substream); +} + + +/*--------------------------------------------------------------------------*\ + * PCM operations +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params */ + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = rtd->dai->cpu_dai->dma_data; + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + pr_debug("atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%u, period_size=%u)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); + return 0; +} + +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + return 0; +} + +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + int ret = 0; + + pr_debug("atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %u\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + pr_debug("atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + pr_debug("sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + +static int atmel_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + out: + return ret; +} + +static int atmel_pcm_close(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, +}; + + +/*--------------------------------------------------------------------------*\ + * ASoC platform driver +\*--------------------------------------------------------------------------*/ +static u64 atmel_pcm_dmamask = 0xffffffff; + +static int atmel_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + int ret = 0; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &atmel_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->capture.channels_min) { + pr_debug("at32-pcm:" + "Allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} + +static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +#ifdef CONFIG_PM +static int atmel_pcm_suspend(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* disable the PDC and save the PDC registers */ + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + + prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); + prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); + prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); + prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); + + return 0; +} + +static int atmel_pcm_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* restore the PDC registers and enable the PDC */ + ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); + ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); + ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + return 0; +} +#else +#define atmel_pcm_suspend NULL +#define atmel_pcm_resume NULL +#endif + +struct snd_soc_platform atmel_soc_platform = { + .name = "atmel-audio", + .pcm_ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free_dma_buffers, + .suspend = atmel_pcm_suspend, + .resume = atmel_pcm_resume, +}; +EXPORT_SYMBOL_GPL(atmel_soc_platform); + +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("Atmel PCM module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 0000000..ec9b282 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,86 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include <linux/atmel-ssc.h> + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +extern struct snd_soc_platform atmel_soc_platform; + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* _ATMEL_PCM_H */ diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 0000000..2ed1575 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,803 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir_mask = SSC_DIR_MASK_PLAYBACK; + else + dir_mask = SSC_DIR_MASK_CAPTURE; + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} +#if 0 +/* + * Record the SSC system clock rate. + */ +static int atmel_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + /* + * The only clock supplied to the SSC is the AT91 master clock, + * which is only used if the SSC is generating BCLK and/or + * LRC clocks. + */ + switch (clk_id) { + case ATMEL_SYSCLK_MCK: + atmel_ssc_sysclk = freq; + break; + default: + return -EINVAL; + } + + return 0; +} +#endif +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou(a)atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 0000000..a828746 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,121 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; +}; +extern struct snd_soc_dai atmel_ssc_dai[]; + +#endif /* _AT91_SSC_DAI_H */ diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c new file mode 100644 index 0000000..7e6560b --- /dev/null +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -0,0 +1,523 @@ +/* sound/soc/at32/playpaq_wm8510.c + * ASoC machine driver for PlayPaq using WM8510 codec + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum(a)acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c + * + * NOTE: If you don't have the AT32 enhanced portmux configured (which + * isn't currently in the mainline or Atmel patched kernel), you will + * need to set the MCLK pin (PA30) to peripheral A in your board initialization + * code. Something like: + * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + * + */ + +/* #define DEBUG */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/at32ap700x.h> +#include <mach/portmux.h> + +#include "../codecs/wm8510.h" +#include "at32-pcm.h" +#include "at32-ssc.h" + + +/*-------------------------------------------------------------------------*\ + * constants +\*-------------------------------------------------------------------------*/ +#define MCLK_PIN GPIO_PIN_PA(30) +#define MCLK_PERIPH GPIO_PERIPH_A + + +/*-------------------------------------------------------------------------*\ + * data types +\*-------------------------------------------------------------------------*/ +/* SSC clocking data */ +struct ssc_clock_data { + /* CMR div */ + unsigned int cmr_div; + + /* Frame period (as needed by xCMR.PERIOD) */ + unsigned int period; + + /* The SSC clock rate these settings where calculated for */ + unsigned long ssc_rate; +}; + + +/*-------------------------------------------------------------------------*\ + * module data +\*-------------------------------------------------------------------------*/ +static struct clk *_gclk0; +static struct clk *_pll0; + +#define CODEC_CLK (_gclk0) + + +/*-------------------------------------------------------------------------*\ + * Sound SOC operations +\*-------------------------------------------------------------------------*/ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE +static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + struct ssc_clock_data cd; + unsigned int rate, width_bits, channels; + unsigned int bitrate, ssc_div; + unsigned actual_rate; + + + /* + * Figure out required bitrate + */ + rate = params_rate(params); + channels = params_channels(params); + width_bits = snd_pcm_format_physical_width(params_format(params)); + bitrate = rate * width_bits * channels; + + + /* + * Figure out required SSC divider and period for required bitrate + */ + cd.ssc_rate = clk_get_rate(ssc->clk); + ssc_div = cd.ssc_rate / bitrate; + cd.cmr_div = ssc_div / 2; + if (ssc_div & 1) { + /* round cmr_div up */ + cd.cmr_div++; + } + cd.period = width_bits - 1; + + + /* + * Find actual rate, compare to requested rate + */ + actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); + pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", + rate, actual_rate); + + + return cd; +} +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + +static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + unsigned int pll_out = 0, bclk = 0, mclk_div = 0; + int ret; + + + /* Due to difficulties with getting the correct clocks from the AT32's + * PLL0, we're going to let the CODEC be in charge of all the clocks + */ +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); +#else + struct ssc_clock_data cd; + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); +#endif + + if (ssc == NULL) { + pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + + /* + * Figure out PLL and BCLK dividers for WM8510 + */ + switch (params_rate(params)) { + case 48000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 44100: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 22050: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_2; + bclk = WM8510_BCLKDIV_8; + break; + + case 16000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_3; + bclk = WM8510_BCLKDIV_8; + break; + + case 11025: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_4; + bclk = WM8510_BCLKDIV_8; + break; + + case 8000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_6; + bclk = WM8510_BCLKDIV_8; + break; + + default: + pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", + params_rate(params)); + return -EINVAL; + } + + + /* + * set CPU and CODEC DAI configuration + */ + ret = snd_soc_dai_set_fmt(codec_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CODEC DAI format (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU DAI format (%d)\n", + ret); + return ret; + } + + + /* + * Set CPU clock configuration + */ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); + pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", + cd.cmr_div, cd.period); + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, + cd.period); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU transmit period (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + /* + * Set CODEC clock configuration + */ + pr_debug("playpaq_wm8510: " + "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", + clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); + + +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); + if (ret < 0) { + pr_warning + ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + ret = snd_soc_dai_set_pll(codec_dai, 0, + clk_get_rate(CODEC_CLK), pll_out); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", + ret); + return ret; + } + + + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", + ret); + return ret; + } + + + return 0; +} + + + +static struct snd_soc_ops playpaq_wm8510_ops = { + .hw_params = playpaq_wm8510_hw_params, +}; + + + +static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + + + +static const char *intercon[][3] = { + /* speaker connected to SPKOUT */ + {"Ext Spk", NULL, "SPKOUTP"}, + {"Ext Spk", NULL, "SPKOUTN"}, + + {"Mic Bias", NULL, "Int Mic"}, + {"MICN", NULL, "Mic Bias"}, + {"MICP", NULL, "Mic Bias"}, + + /* Terminator */ + {NULL, NULL, NULL}, +}; + + + +static int playpaq_wm8510_init(struct snd_soc_codec *codec) +{ + int i; + + /* + * Add DAPM widgets + */ + for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); + + + + /* + * Setup audio path interconnects + */ + for (i = 0; intercon[i][0] != NULL; i++) { + snd_soc_dapm_connect_input(codec, + intercon[i][0], + intercon[i][1], intercon[i][2]); + } + + + /* always connected pins */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + snd_soc_dapm_sync(codec); + + + + /* Make CSB show PLL rate */ + snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, + WM8510_OPCLKDIV_1 | 4); + + return 0; +} + + + +static struct snd_soc_dai_link playpaq_wm8510_dai = { + .name = "WM8510", + .stream_name = "WM8510 PCM", + .cpu_dai = &at32_ssc_dai[0], + .codec_dai = &wm8510_dai, + .init = playpaq_wm8510_init, + .ops = &playpaq_wm8510_ops, +}; + + + +static struct snd_soc_machine snd_soc_machine_playpaq = { + .name = "LRS_PlayPaq_WM8510", + .dai_link = &playpaq_wm8510_dai, + .num_links = 1, +}; + + + +static struct wm8510_setup_data playpaq_wm8510_setup = { + .i2c_bus = 0, + .i2c_address = 0x1a, +}; + + + +static struct snd_soc_device playpaq_wm8510_snd_devdata = { + .machine = &snd_soc_machine_playpaq, + .platform = &at32_soc_platform, + .codec_dev = &soc_codec_dev_wm8510, + .codec_data = &playpaq_wm8510_setup, +}; + +static struct platform_device *playpaq_snd_device; + + +static int __init playpaq_asoc_init(void) +{ + int ret = 0; + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + + /* + * Configure MCLK for WM8510 + */ + _gclk0 = clk_get(NULL, "gclk0"); + if (IS_ERR(_gclk0)) { + _gclk0 = NULL; + goto err_gclk0; + } + _pll0 = clk_get(NULL, "pll0"); + if (IS_ERR(_pll0)) { + _pll0 = NULL; + goto err_pll0; + } + if (clk_set_parent(_gclk0, _pll0)) { + pr_warning("snd-soc-playpaq: " + "Failed to set PLL0 as parent for DAC clock\n"); + goto err_set_clk; + } + clk_set_rate(CODEC_CLK, 12000000); + clk_enable(CODEC_CLK); + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); +#endif + + + /* + * Create and register platform device + */ + playpaq_snd_device = platform_device_alloc("soc-audio", 0); + if (playpaq_snd_device == NULL) { + ret = -ENOMEM; + goto err_device_alloc; + } + + platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); + playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; + + ret = platform_device_add(playpaq_snd_device); + if (ret) { + pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", + ret); + goto err_device_add; + } + + return 0; + + +err_device_add: + if (playpaq_snd_device != NULL) { + platform_device_put(playpaq_snd_device); + playpaq_snd_device = NULL; + } +err_device_alloc: +err_set_clk: + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } +err_pll0: + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } +err_gclk0: + if (ssc != NULL) { + ssc_free(ssc); + ssc = NULL; + } +err_ssc: + return ret; +} + + +static void __exit playpaq_asoc_exit(void) +{ + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_free_pin(MCLK_PIN); +#endif + + platform_device_unregister(playpaq_snd_device); + playpaq_snd_device = NULL; +} + +module_init(playpaq_asoc_init); +module_exit(playpaq_asoc_exit); + +MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); +MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c new file mode 100644 index 0000000..4e191df --- /dev/null +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -0,0 +1,329 @@ +/* + * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based + * ATMEL AT91SAM9G20ek board. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on ati_b1_wm8731.c by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * Based on corgi.c by: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/hardware.h> +#include <mach/gpio.h> + +#include "../codecs/wm8731.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + int ret; + + /* codec system clock is supplied by PCK0, set to 12MHz */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, + 12000000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + + dev_dbg(rtd->socdev->dev, "shutdown"); +} + +static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct atmel_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + int ret; + + unsigned int rate; + int cmr_div, period; + + if (ssc == NULL) { + printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* + * The SSC clock dividers depend on the sample rate. The CMR.DIV + * field divides the system master clock MCK to drive the SSC TK + * signal which provides the codec BCLK. The TCMR.PERIOD and + * RCMR.PERIOD fields further divide the BCLK signal to drive + * the SSC TF and RF signals which provide the codec DACLRC and + * ADCLRC clocks. + * + * The dividers were determined through trial and error, where a + * CMR.DIV value is chosen such that the resulting BCLK value is + * divisible, or almost divisible, by (2 * sample rate), and then + * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1. + */ + rate = params_rate(params); + + switch (rate) { + case 8000: + cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */ + period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */ + break; + case 11025: + cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */ + period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */ + break; + case 16000: + cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */ + period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */ + break; + case 22050: + cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */ + period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */ + break; + case 32000: + cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */ + period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */ + break; + case 44100: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */ + break; + case 48000: + cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */ + period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */ + break; + case 88200: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */ + break; + case 96000: + cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */ + period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */ + break; + default: + printk(KERN_WARNING "unsupported rate %d" + " on at91sam9g20ek board\n", rate); + return -EINVAL; + } + + /* set the MCK divider for BCLK */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div); + if (ret < 0) + return ret; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* set the BCLK divider for DACLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_TCMR_PERIOD, period); + } else { + /* set the BCLK divider for ADCLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_RCMR_PERIOD, period); + } + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops at91sam9g20ek_ops = { + .startup = at91sam9g20ek_startup, + .hw_params = at91sam9g20ek_hw_params, + .shutdown = at91sam9g20ek_shutdown, +}; + + +static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static const struct snd_soc_dapm_route intercon[] = { + + /* speaker connected to LHPOUT */ + {"Ext Spk", NULL, "LHPOUT"}, + + /* mic is connected to Mic Jack, with WM8731 Mic Bias */ + {"MICIN", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Int Mic"}, +}; + +/* + * Logic for a wm8731 as connected on a at91sam9g20ek board. + */ +static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec) +{ + printk(KERN_DEBUG + "at91sam9g20ek_wm8731 " + ": at91sam9g20ek_wm8731_init() called\n"); + + /* Add specific widgets */ + snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets, + ARRAY_SIZE(at91sam9g20ek_dapm_widgets)); + /* Set up specific audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + /* not connected */ + snd_soc_dapm_disable_pin(codec, "RLINEIN"); + snd_soc_dapm_disable_pin(codec, "LLINEIN"); + + /* always connected */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link at91sam9g20ek_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai = &atmel_ssc_dai[0], + .codec_dai = &wm8731_dai, + .init = at91sam9g20ek_wm8731_init, + .ops = &at91sam9g20ek_ops, +}; + +static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { + .name = "WM8731", + .dai_link = &at91sam9g20ek_dai, + .num_links = 1, +}; + +static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { + .i2c_bus = 0, + .i2c_address = 0x1b, +}; + +static struct snd_soc_device at91sam9g20ek_snd_devdata = { + .machine = &snd_soc_machine_at91sam9g20ek, + .platform = &atmel_soc_platform, + .codec_dev = &soc_codec_dev_wm8731, + .codec_data = &at91sam9g20ek_wm8731_setup, +}; + +static struct platform_device *at91sam9g20ek_snd_device; + +static int __init at91sam9g20ek_init(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + int ret; + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); + if (!at91sam9g20ek_snd_device) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + ret = -ENOMEM; + } + + platform_set_drvdata(at91sam9g20ek_snd_device, + &at91sam9g20ek_snd_devdata); + at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev; + + ret = platform_device_add(at91sam9g20ek_snd_device); + if (ret) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + platform_device_put(at91sam9g20ek_snd_device); + } + + return ret; + +err_ssc: + return ret; +} + +static void __exit at91sam9g20ek_exit(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + platform_device_unregister(at91sam9g20ek_snd_device); + at91sam9g20ek_snd_device = NULL; +} + +module_init(at91sam9g20ek_init); +module_exit(at91sam9g20ek_exit); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731"); +MODULE_LICENSE("GPL"); -- 1.5.3.7

1 0